summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-11-10b43: properly request pcmcia IRQMichael Buesch
PCMCIA needs an additional step to request the IRQ. No need to add code to release the IRQ here, as that's done automatically in pcmcia_disable_device(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43legacy: fix shared IRQ race conditionStefano Brivio
Fix an IRQ race condition in b43legacy. If we call b43legacy_wireless_core_stop(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: fix shared IRQ race conditionStefano Brivio
Fix an IRQ race condition in b43. If we call b43_stop_wireless_core(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43legacy: fix possible buffer overrun in debugfsStefano Brivio
Fix possible buffer overrun. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Rewrite and fix rfkill initMichael Buesch
The rfkill subsystem doesn't like code like that rfkill_allocate(); rfkill_register(); rfkill_unregister(); rfkill_register(); /* <- This will crash */ This sequence happens with modprobe b43 ifconfig wlanX up ifconfig wlanX down ifconfig wlanX up Fix this by always re-allocating the rfkill stuff before register. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: debugfs SHM read buffer overrun fixMichael Buesch
Fix possible buffer overrun. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: Fix rfkill callback deadlockMichael Buesch
wl->mutex might already be locked on initialization. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10b43: pcmcia-host initialization bugfixesMichael Buesch
Fix the initialization for PCMCIA devices. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10ipw2100: fix postfix decrement errorsRoel Kluin
If i reaches zero, the loop ends, but the postfix decrement subtracts it to -1. Testing for 'i == 0', later in the function, will not fulfill its purpose. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10hostap: fix section mismatch warningRandy Dunlap
Fix section mismatch warning: WARNING: vmlinux.o(.data+0x36fcc): Section mismatch: reference to .init.data:prism2_pci_id_table (between 'prism2_pci_drv_id' and 'prism2_pci_funcs') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10rt2x00: Block adhoc & master modeIvo van Doorn
rt2x00 is broken when it comes down to adhoc and master mode. The main problem is the beaconing, which is completely failing. Untill a solution has been found, both beacon requiring modes must be disabled to prevent numerous bug reports. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10libertas: properly account for queue commandsMarcelo Tosatti
Properly account for queue commands, this fixes a problem reported by Holger Schurig when using the debugfs interface. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10libertas: make if_sdio align packetsPierre Ossman
Incoming packets have to be aligned or the IP stack becomes upset. Make sure to shift them two bytes to achieve this. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10libertas: fixes for slow hardwareHolger Schurig
Fixes for slow hardware. Signed-off-by: Vitaly V. Bursov <vitalyvb@ukr.net> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10hermes: clarify Intel reference in Kconfig helpJohn W. Linville
The Intel device supported by the hermes driver core is the IPW2011. The "Intel PRO/Wireless" wording suggests the later Centrino devices and may be confusing to some users. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10r8169: revert 7da97ec96a0934319c7fbedd3d38baf533e20640 (partly)Mark Lord
Various symptoms depending on the .config options: - the card stops working after some (short) time - the card does not work at all - the card disappears (nothing in lspci/dmesg) A real power-off is needed to recover the card. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2007-11-10r8169: do not enable the TBI for the 8168 and the 81x0Francois Romieu
The 8168c and the 8100e choke on it. I have not seen an indication nor received a report that the TBI is being actively used on the remaining 8168b and 8110. Let's disable it for now until someone complains. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Matthias Winkler <m.winkler@unicon-ka.de> Cc: Maarten Vanraes <maarten.vanraes@gmail.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-11-10r8169: add PCI ID for the 8168 in the Abit Fatal1ty F-190HD motherboardCiaran McCreesh
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@blueyonder.co.uk> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2007-11-10add support for smc91x ethernet interface on zyloniteeric miao
This patch adds LAN91C111 ethernet interface support for zylonite (a.k.a Marvell's PXA3xx Development Platform) with smc91x driver. It would be better if a patch would support zylonite along with all other PXA boards with a single binary of smc91x driver, but it looks quite difficult for the moment, so ugly #ifdef is still used here. Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: version 1.20Stephen Hemminger
Version update to 1.20 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: handle advanced error recovery config issuesStephen Hemminger
The PCI AER support may not work for a couple of reasons. It may not be configured into the kernel or there may be a BIOS bug that prevents MMCONFIG from working. If MMCONFIG doesn't work then the PCI registers that control AER will not be accessible via pci_read_config functions; luckly there is another window to access PCI space in the device, so use that. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: remove unneeded mask updateStephen Hemminger
The IRQ's is already masked on shutdown, and on startup avoid touching PHY until after phy_init(). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: dont change LED after autonegStephen Hemminger
Don't need to change LED's after auto negotiation, the chip sets them correctly. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: longer PHY delayStephen Hemminger
Increse phy delay and handle I/O errors. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: status ring race fixStephen Hemminger
The D-Link PCI-X board (and maybe others) can lie about status ring entries. It seems it will update the register for last status index before completing the DMA for the ring entry. To avoid reading stale data, zap the old entry and check. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-10sky2: enable PCI config writesStephen Hemminger
On some boards, PCI configuration space access is turned off by default. The 2.6.24 driver doesn't turn it on, and should have. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-09Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits) sh: remove dead config symbols from SH code sh: Kill off broken snapgear ds1302 code. sh: Add a dummy vga.h. rtc: rtc-sh: Zero out tm value for invalid rtc states. rtc: sh-rtc: Handle rtc_device_register() failure properly. sh: Fix heartbeart on Solution Engine series sh: Remove SCI_NPORTS from sh-sci.h sh: Fix up PAGE_KERNEL_PCC() for nommu. sh: hs7751rvoip: Kill off dead IPR IRQ mappings. sh: hs7751rvoip: irq.c needs linux/interrupt.h. sh: Kill off __{copy,clear}_user_page(). sh: Optimized copy_{to,from}_user_page() for SH-4. sh: Wire up clear_user_highpage(). sh: Kill off the remaining ST40 cruft. superhyway: Handle device_register() retval properly. sh: kgdb sysrq depends on magic sysrq. sh: Add -Werror for clean directories. sh: Fix up kgdb build with modular sh-sci. sh: Export __{s,u}divsi3_i4i on all CPUs. sh: Fix up kgdb-on-NMI branch target. ...
2007-11-09Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: fix one-shot timer mode [ARM] 4645/1: Cyberpro: Trivial fix to restore 16bpp mode. [ARM] 4644/2: fix flush_kern_tlb_range() in module space [ARM] Allow watchdog drivers to be selected again [ARM] 4633/1: omap build fix when FB enabled [ARM] 4642/2: netX: default config for netx based boards [ARM] 4641/2: netX: fix kobject_name type [ARM] Fix iop3xx macro
2007-11-09Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Add UNPLUG traces to all appropriate places block: fix requeue handling in blk_queue_invalidate_tags() mmc: Fix sg helper copy-and-paste error pktcdvd: fix BUG caused by sysfs module reference semantics change ioprio: allow sys_ioprio_set() value of 0 to reset ioprio setting cfq_idle_class_timer: add paranoid checks for jiffies overflow cfq: fix IOPRIO_CLASS_IDLE delays cfq: fix IOPRIO_CLASS_IDLE accounting
2007-11-09Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (37 commits) [POWERPC] EEH: Make sure warning message is printed [POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC [POWERPC] windfarm: Fix windfarm thread freezer interaction [POWERPC] Fix si_addr value on low level hash failures [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options [POWERPC] pasemi: Update defconfig [POWERPC] iSeries: Fix ref counting in vio setup [POWERPC] ] Fix memset size error [POWERPC] Fix link errors for allyesconfig [POWERPC] iSeries_init_IRQ non-PCI tidy [POWERPC] Change fallocate to match unistd.h on powerpc [POWERPC] EEH: Avoid crash on null device [POWERPC] EEH: Drivers that need reset trump others [POWERPC] EEH: Clean up comments [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2) [POWERPC] Fix switch_slb handling of 1T ESID values [POWERPC] Fix build failure when CONFIG_VIRT_CPU_ACCOUNTING is not defined [POWERPC] Include udbg.h when using udbg_printf [POWERPC] Fix cache line vs. block size confusion [POWERPC] Fix sysctl table check failure on PowerMac ...
2007-11-09Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits) [NETLINK]: Fix unicast timeouts [INET]: Remove per bucket rwlock in tcp/dccp ehash table. [IPVS]: Synchronize closing of Connections [IPVS]: Bind connections on stanby if the destination exists [NET]: Remove Documentation/networking/pt.txt [NET]: Remove Documentation/networking/routing.txt [NET]: Remove Documentation/networking/ncsa-telnet [NET]: Remove comx driver docs. [NET]: Remove Documentation/networking/Configurable [NET]: Clean proto_(un)register from in-code ifdefs [IPSEC]: Fix crypto_alloc_comp error checking [VLAN]: Fix SET_VLAN_INGRESS_PRIORITY_CMD ioctl [NETNS]: Fix compiler error in net_namespace.c [TTY]: Use tty_mode_ioctl() in network drivers. [TTY]: Fix network driver interactions with TCGET/SET calls. [PKT_SCHED] CLS_U32: Fix endianness problem with u32 classifier hash masks. [NET]: Removing duplicit #includes [NET]: Let USB_USBNET always select MII. [RRUNNER]: Do not muck with sysctl_{r,w}mem_max [DLM] lowcomms: Do not muck with sysctl_rmem_max. ...
2007-11-09Add UNPLUG traces to all appropriate placesAlan D. Brunelle
Added blk_unplug interface, allowing all invocations of unplugs to result in a generated blktrace UNPLUG. Signed-off-by: Alan D. Brunelle <Alan.Brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-08[ARM] 4645/1: Cyberpro: Trivial fix to restore 16bpp mode.Jan Rinze
Cyberpro: when user requests 16bpp, use it and not 24bpp. There was a missing break causing requests for 16bpp mode to end up in 24bpp mode. Signed-off-by: Jan Rinze Peterzon <janrinze@home.nl> Acked-by: Ralph Siemsen <ralphs@netwinder.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-08mmc: Fix sg helper copy-and-paste errorRoland Dreier
Commit 45711f1a ("[SG] Update drivers to use sg helpers") had the following bogus change in drivers/mmc/card/queue.c: > - src_buf = page_address(src->page) + src->offset; > + src_buf = sg_virt(dst); (Notice that "src" is converted to "dst"). Turn this "dst" back into the intended "src". Signed-off-by: Roland Dreier <roland@digitalvampire.org> Tested-by: Romano Giannetti <romano.giannetti@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-08pktcdvd: fix BUG caused by sysfs module reference semantics changeTejun Heo
pkt_setup_dev() expects module reference to be held on invocation. This used to be true for sysfs callbacks but not anymore. Test and grab module reference around pkt_setup_dev() in class_pktcdvd_store_add(). Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-08Merge branch 'for-2.6.24' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
2007-11-08[POWERPC] windfarm: Fix windfarm thread freezer interactionJohannes Berg
When I fixed the windfarm freezer interaction first in commit 1ed2ddf380e19dafeec2150ca709ef7f4a67cd21, an earlier patch than the one I came up with after comments was committed. This has come back to haunt us now because commit d5d8c5976d6adeddb8208c240460411e2198b393 changed the freezer to no long send signals. Fix it by removing the windfarm thread's signal logic and restoring the original try_to_freeze(). We could simply revert 1ed2ddf380e19dafeec2150ca709ef7f4a67cd21 now but I feel that the assertion that no signal is delivered to the windfarm thread needs not be there. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-07[TTY]: Use tty_mode_ioctl() in network drivers.Alan Cox
We conciously make a change here - we permit mode and speed setting to be done in things like SLIP mode. There isn't actually a technical reason to disallow this. It's usually a silly thing to do but we can do it and soemone might wish to do so. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[TTY]: Fix network driver interactions with TCGET/SET calls.Alan Cox
Dave Miller noted various cases where line disciplines for things like ppp go poking around in termios themselves in ways that broke with the new termios code. Rather than have them all learning about termios internals provide proper methods for this - tty_mode_ioctl() This handles all the terminal mode handling for speed/carrier etc and none of the methods are ldisc dependant so they can be called by any user - tty_perform_flush() This extracts the flush functionality and enables pppd the ppp layer to share it cleanly. The existing n_tty_ioctl code is refactored in this patch to provide the new functions and to call them itself appropriately. This patch has no (intended) behaviour changes and simply prepares for the other fixes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[NET]: Let USB_USBNET always select MII.Adrian Bunk
All this USB_USBNET_MII trickery is simply not worth it considering how few code it saves. As a side effect, this also fixes the following compile error reported by Toralf Förster: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o: In function `usbnet_set_settings': (.text+0xf1876): undefined reference to `mii_ethtool_sset' drivers/built-in.o: In function `usbnet_get_settings': (.text+0xf1836): undefined reference to `mii_ethtool_gset' drivers/built-in.o: In function `usbnet_get_link': (.text+0xf18d6): undefined reference to `mii_link_ok' drivers/built-in.o: In function `usbnet_nway_reset': (.text+0xf18f6): undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[RRUNNER]: Do not muck with sysctl_{r,w}mem_maxDavid S. Miller
Drivers have no business changing these values. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[VETH]: Clarify "virtual ethernet device" to "virtual ethernet pair device".Rusty Russell
It'd also be nice to mention "containers" somewhere in the help text (I'm assuming that's what it's for?). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07[PPP]: L2TP: Fix oops in transmit and receive pathsJames Chapman
Changes made on 18-sep to fix skb handling in the pppol2tp driver broke the transmit and receive paths. Users are only running into this now because distros are now using 2.6.23 and I must have messed up when I tested the change. For receive, we now do our own calculation of how much to pull from the skb (variable length L2TP header) rather than using skb_transport_offset(). Also, if the skb isn't a data packet, it must be passed back to UDP with skb->data pointing to the UDP header. For transmit, make sure skb->sk is set up because ip_queue_xmit() needs it. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-07rtc: rtc-sh: Zero out tm value for invalid rtc states.Paul Mundt
Follows the changes of some of the other RTC drivers. If the tm value is bogus, just zero it out. Adds some sanity for RTC_RD_TIME. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07rtc: sh-rtc: Handle rtc_device_register() failure properly.Paul Mundt
Currently if rtc_device_register() fails we have an IS_ERR() on the wrong pointer, which causes this to always be skipped. Fix this up to actually check the right pointer. The return value was always correct, even though the check was wrong. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Remove SCI_NPORTS from sh-sci.hNobuhiro Iwamatsu
When SH7710 and SH7712 are used, SCI_NPORTS redefined. Remove it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Kill off the remaining ST40 cruft.Paul Mundt
The ST40 stuff in-tree hasn't built for some time, and hasn't been updated for over 3 years. ST maintains their own out-of-tree changes and rebases occasionally, and that's ultimately where all of the ST40 users go anyways. In order for the ST40 code to be brought up to date most of the stuff removed in this changeset would have to be rewritten anyways, so there's very little benefit in keeping the remnants around either. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07superhyway: Handle device_register() retval properly.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07firewire: fw-sbp2: fix refcountingStefan Richter
Since patch "fw-sbp2: use an own workqueue (fix system responsiveness)" increased parallelism between fw-sbp2 and fw-core, it was possible that fw-sbp2 didn't release the SCSI device when the FireWire device was disconnected. This happened if sbp2_update() ran during sbp2_login(), because a bus reset occurred during sbp2_login(). The sbp2_login() work would [try to] reschedule itself because it failed due to the bus reset, and it would _not_ drop its reference on the target. However, sbp2_update() would schedule sbp2_login() too before sbp2_login() rescheduled itself and hence sbp2_update() would take an additional reference. And then we would have one reference too many. The fix is to _always_ drop the reference when leaving the sbp2_login() work. If the sbp2_login() work reschedules itself, it takes a reference, but only if it wasn't already rescheduled by sbp2_update(). Ditto in the sbp2_reconnect() work. The resulting code is actually simpler than before: We _always_ take a reference when successfully scheduling work. And we _always_ drop a reference when leaving a workqueue job. No exceptions. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-11-05Merge branch 'drm-patches' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: DRM: fix memset size error drm: remove remnants of DRM_COPY_FROM/TO_USER_IOCTL drm: remove second forward decleration of drm device struct.
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-25 14:25:23 +0000