summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7317): pvrusb2: Increase buffer size for printing video standard ↵Mike Isely
strings Buffer size for printing pvrusb2 video standard strings was too small before. This is cosmetic; the printing logic is not able to overrun a too-short buffer. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7316): pvrusb2: Handle ATSC video standard bitsMike Isely
The pvrusb2 driver dynamically generates an enumeration of support video standard combinations based on which video standard bits are set. ATSC modes don't fall into this since they are by nature not analog. The pvrusb2 driver has been warning about an inability to classify ATSC standards. This change causes the classification algorithm to ignore any ATSC standards (such things are better handled elsewhere anyway). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7315): pvrusb2: Add Gotview USB 2.0 DVD Deluxe to supported devicesMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7314): pvrusb2: Make device attribute structure more compactMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7313): pvrusb2: Make LED control into a device-specific attributeMike Isely
The pvrusb2 driver has used hardcoded logic to control the LED on the device. However this is really Hauppauge-specific behavior. This change defines a new device attribute for LED control and sets things up appropriately for Hauppauge devices. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7312): pvrusb2: Indicate streaming status via LEDMike Isely
Most of this originates from Michael Krufky <mkrufky@linuxtv.org>; these changes move LED control into separate functions. This is the first step in new work to make LED control a device-specific attribute. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7311): pvrusb2: Allow digital streaming without encoder firmwareMike Isely
The encoder is not a part of the pipeline when in digital mode, so streaming is OK in this case even when the encoder's firmware is not loaded. Modify the driver core handling of this scenario to permit streaming. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7310): pvrusb2: trace print cosmetic cleanup / improvementsMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7309): pvrusb2: Enhance core logic to also control digital streamingMike Isely
This is a major pvrusb2 change. The driver core has an algorithm that is used to cleanly sequence the changes needed to enable / disable video streaming. The algorithm had originally been written for analog streaming, but when in digital mode the pipeline is considerably Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7308): pvrusb2: Define digital control scheme device attributesMike Isely
Unlike analog control, control of the digital side is not nearly as uniform among different devices. So we have to specify the correct digital control scheme as a new device attribute. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7307): pvrusb2: New functions for additional FX2 digital-related ↵Mike Isely
commands This code is actually part of a larger set from Mike Krufky <mkrufky@linuxtv.org>, to support ATSC streaming from within the pvrusb2 driver. More to come... Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7306): pvrusb2: Fix oops possible when claiming a NULL streamMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7305): pvrusb2: whitespace fixupMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7304): pvrusb2: add function pvr2_hdw_cmd_powerdownMichael Krufky
Call pvr2_hdw_cmd_powerdown to power down the device Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7303): pvrusb2: Ensure that default input selection is actually validMike Isely
Previously the pvrusb2 driver just started with the default input to be "television". But if the device doesn't support an analog tuner then this default must be different. New logic here selects a reasonable default based on the actual valid set of available inputs. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7302): pvrusb2: Improve control validation for enumerationsMike Isely
When an enumeration control is changed, the pvrusb2 driver assumed that the enumeration values were continuous. That is no longer true; this change allows for properly input validation even when not all enumeration values are legal (which can happen with input selection based on what the hardware supports). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7301): pvrusb2: Implement addition sysfs tracingMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7300): pvrusb2: v4l2 implementation fixes for input selectionMike Isely
Now that the pvrusb2 driver can dynamically choose which inputs to make available depending on the hardware, the enumeration of input choices is no longer a contiguous range of integers. Unfortunately this causes a problem in the v4l2 implementation since the input enumeration requires continuity in the API. This change implements a mapping in order to preserve the v4l2 interface requirement. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availabilityMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7298): pvrusb2: Account for dtv choice (a bit) in v4l2 implementationMike Isely
The v4l2 implementation in pvru2b2 must produce a sane answer when asked, when the input choice is set to dtv. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7297): pvrusb2: Dynamically control range of input selectionsMike Isely
This follows from defining the available inputs as device attributes. This change causes the driver to adjust its list of inputs based on those attributes. Now, for example, the FM radio will appear as a choice only if the hardware supports an FM radio. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7296): pvrusb2: Define device attributes for all input modesMike Isely
Different devices support different input types. Up until now we've really been assuming that everyone has an analog tuner, an FM radio, composite, and s-video inputs. But as we add other devices, these assumptions are no longer true. The way to deal with this is to define the available inputs as additional device attributes, so that the driver can adjust its internal behavior accordingly. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7295): pvrusb2: add device attributes for fm radio and digital tunerMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7294): : tuner and radio addresses are missing for the PixelView ↵Wojciech Migda
PlayTV card The PixelView PlayTV card definition structure was missing initialization of the tuner_addr and radio_addr fields. As a result it was impossible to have the tuner initialized using parameters specified while loading the bttv.ko module. This regression became visible after the v4l rearrangements introduced somewhere around 2.6.15 kernel version. The root cause for the tuner initialization failure is located in the attach_inform function in the bttv-i2c.c file. There at the very beginning the addr variable holding the tuner device address is initialized with the value taken from the bttv_tvcards array. For the PixelView PlayTV card the tuner address field (and the radio address as well) was uninitialized, and thus equal 0. Later in that function execution of the TUNER_SET_TYPE_ADDR tuner command is guarded with check for the tuner address either equal ADDR_UNSET, or client->addr. Since both are non-zero (the latter in case of the card owned by me at the runtime is equal 0x61) the TUNER_SET_TYPE_ADDR command is not executed, and consequently in the tuner_attach function in the tuner-core.c file call to i2c_attach_client does not result in assigning the tuner type variable with the requested value. Providing initialization of the tuner_addr and radio_addr with ADDR_UNSET values as it is already done for other tv cards defined in bttv-cards.c ensures that the tuner initialization is done correctly, just as it used to be in the 2.6.14 kernel. Signed-off-by: Wojciech Migda <wojtek.golf@interia.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7293): DMX_OUT_TSDEMUX_TAP: record two streams from same mux, resendPeter Hartley
Currently (in linux-2.6.24, but linux-dvb hg looks similar), the dmx_output_t in the dmx_pes_filter_params decides two things: whether output is sent to demux0 or dvr0 (in dmxdev.c:dvb_dmxdev_ts_callback), *and* whether to depacketise TS (in dmxdev.c:dvb_dmxdev_filter_start). As it stands, those two things can't be set independently: output destined for demux0 is depacketised, output for dvr0 isn't. This is what you want for capturing multiple audio streams from the same multiplex simultaneously: open demux0 several times and send depacketised output there. And capturing a single video stream is fine not what you want: you want multi-open (so demux0, not dvr0), but you want the TS nature preserved (because that's what you want on output, as you're going to re-multiplex it with the audio). At least one existing solution -- GStreamer -- sends all its streams simultaneously via dvr0 and demuxes again in userland, but it seems a bit of a shame to pick out all the PIDs in kernel, stick them back together in kernel, and send them to userland only to get unpicked again, when the alternative is such a small API addition. The attached patch adds a new value for dmx_output_t: DMX_OUT_TSDEMUX_TAP, which sends TS to the demux0 device. With this patch and a dvb-usb-dib0700 (and UK Freeview from Sandy Heath), I can successfully capture an audio/video PID pair into a TS file that mplayer can play back. Signed-off-by: Peter Hartley <pdh@utter.chaos.org.uk> Acked-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7289): cx88: enable IR receiver and real time clock on FusionHDTV7 GoldMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7288): cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 GoldSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7286): limit stack usage of ir-kbd-i2c.cMarcin Slusarz
ir_probe allocated struct i2c_client on stack; it's pretty big structure, so allocate it with kzalloc make checkstack output without this patch: x059d ir_probe [ir-kbd-i2c]: 1000 Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7283): videobuf-dma-sg: Remove unused variableDouglas Schilling Landgraf
Removed warning message: - videobuf-dma-sg.c: In function 'videobuf_dma_unmap': - videobuf-dma-sg.c:281: warning: unused variable 'dev' Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7281): v4l: Deadlock in videobuf-core for DQBUF waiting on QBUFBrandon Philips
Avoid a deadlock where DQBUF is holding the vb_lock while waiting on a QBUF which also needs the vb_lock. Reported by Hans Verkuil <hverkuil@xs4all.nl>. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7276): soc-camera: deactivate cameras when not usedGuennadi Liakhovetski
Only attach cameras to the host interface for probing, then detach until open. This allows platforms with several cameras on an interface, physically supporting only one camera, to handle multiple cameras and activate them selectively after initial probing. The first attach during probe is needed to activate the host interface to be able to physically communicate with cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7274): dabusb: fix shadowed variable warning in dabusb.cHarvey Harrison
drivers/media/video/dabusb.c:208:6: warning: symbol 'buffers' shadows an earlier one drivers/media/video/dabusb.c:63:12: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7273): suppress compound statement warning in dvb-bt8xx.cHarvey Harrison
Prevailing kernel style seems to prefer always using braces for do {} while (). Add braces to dprintk to suppress the sparse warnings: drivers/media/dvb/bt8xx/dvb-bt8xx.c:73:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:93:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:529:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:614:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:629:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:639:4: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:883:2: warning: do-while statement is not a compound statement drivers/media/dvb/bt8xx/dvb-bt8xx.c:917:2: warning: do-while statement is not a compound statement Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7271): cx88-cards: Fix powerangel gpio1Mauro Carvalho Chehab
With this gpio, audio works properly. Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for Powerangel Real board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7270): cx88-dvb: Renames pci_nano callbackMauro Carvalho Chehab
This callback is specific to pci_nano, since supports only dvb. Renames it to avoid future mistakes. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7269): cx88: Powercolor Angel works only with firmware version 2.5Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7266): cx88-dvb: convert attach_xc3028 into a functionMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7265): cx88: prints an info when xc2028 is set or is attachedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7264): cx88-cards: always use a level on printk messagesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7263): Some cleanups at cx88 callback methodsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7262): Add support for xc3028-based boardsMauro Carvalho Chehab
This patch adds support for the following saa7134 xc3028 based boards: 132 -> AVerMedia Cardbus TV/Radio (E506R) [1461:f436] 133 -> AVerMedia Hybrid TV/Radio (A16D) [1461:f936] 134 -> Avermedia M115 [1461:a836] 135 -> Compro VideoMate T750 [185b:c900] This is based on a original patch thanks to Markus Rechberger that added xc3028 gpio init code for the above boards. This patch moves saa7134_tuner_callback to saa7134-cards, originally used only by tda8290 DVB-S boards. The callback was made more generic to support other tuners. Currently, it supports both tda8290 and xc2028/xc3028 tuners. Added also the basis for xc5000 tuner callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7261): Use the same callback argument as xc3028 and xc5000Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7260): tuner-xc3028: Don't check return code for clock resetMauro Carvalho Chehab
Only tm6000 needs to be aware when a frequency is being changed. This seems to improve channel change detection. Other bridges don't need this. So, better to discard any errors if this fails, and proceed changing the channels. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7259): FusionHDTV DVB-T Pro tuning problem fixesChris Pascoe
It seems that on this board, the demodulator provides the pullup on the I2C bus, which means that calling i2c_gate_ctrl crashes the bus. Turn this off and the xc3028 can talk OK. Also fix some GPIO related settings that became more clear through working on this. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T ProChris Pascoe
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7257): cx88: Add xc2028/3028 boardsMauro Carvalho Chehab
This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7256): cx88: Add support for tuner-xc3028Mauro Carvalho Chehab
Callback gpio's based on Markus Rechberger, Christopher Pascoe and Steven Toth patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7254): cx88: fix FusionHDTV 5 PCI nano name and enable IR supportMichael Krufky
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7252): cx88: Add support for the Dvico PCI NanoSteven Toth
ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 07:30:26 +0000