summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-12-12net/mlx4_en: Use generic etherdevice.h functions.Yan Burman
Get rid of full_mac, zero_mac in favour of is_zero_ether_addr and is_broadcast_ether_addr. Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12solos-pci: fix double-free of TX skb in DMA modeDavid Woodhouse
We weren't clearing card->tx_skb[port] when processing the TX done interrupt. If there wasn't another skb ready to transmit immediately, this led to a double-free because we'd free it *again* next time we did have a packet to send. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bnx2: Fix accidental reversions.Michael Chan
Commit 4ce45e02469c382699f4c5f6df727aea9dd2e1ca "bnx2: Add BNX2 prefix to CHIP ID and name macros" accidentally reverted 2 commits to use pci_ioumap() and to make pci_error_handlers const. This fixes those mistakes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Driver Version Updated to 3.1.2.1Rasesh Mody
Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Firmware updateRasesh Mody
Change Details: - Added Stats clear counter to the bfi_enet_stats_mac structure and ethtool stats - Modified the firmware naming convention to contain the firmware image version (3.1.0.0). The new convention is <firmware-image>-<firmware-version>.bin The change will enforce loading only compatible firmware with this driver and also avoid over-writing the old firmware image in-order to load new version driver as the firmware names used to be the same. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Add RX StateRasesh Mody
Change Details: - BNA state machine for Rx in start_wait state moves it to stop_wait on receipt of RX_E_STOP. In Rx stop_wait state, on receipt of RX_E_STARTED event does enet stop RX_E_STOPPED event does rx_cleanup_cbfn rx_cleanup_cbfn in this case is called without post_cbfn. post_cbfn happens only after RX_E_STARTED event is received in start_wait. Without doing post_cbfn, NAPI remains disabled and in cleanup we try to disable again causing endless wait. ifconfig process and other workers can thus get stuck. - Introducing start_stop_wait state for Rx. This state handles the case of if post_cbfn is not done simply do stop without the cleanup. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Rx Page Based AllocationRasesh Mody
Change Details: Enhanced support for GRO. Page-base allocation method for Rx buffers is used in GRO. Skb allocation has been removed in Rx path to use always warm-cache skbs provided by napi_get_frags. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: TX Intr Coalescing FixRasesh Mody
Change Details: For Tx IB, IPM was enabled with inter_pkt_timeo of 0. This caused the Tx IB not to generate interrupt till inter_pkt_count of packets have been received. Correct definition for BFI_TX_INTERPKT_TIMEO & BFI_TX_INTERPKT_COUNT Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Tx and Rx OptimizationsRasesh Mody
Change details: - Have contiguous queue pages for TxQ, RxQ and CQ. Data structure and QPT changes related to contiguous queue pages - Optimized Tx and Rx unmap structures. Tx and Rx fast path changes due to unmap data structure changes - Re-factored Tx and Rx fastpath routines as per the new queue data structures - Implemented bnad_txq_wi_prepare() to program the opcode, flags, frame_len and num_vectors in the work item - Reduced Max TxQ and RxQ depth to 2048 while default value for Tx/Rx queue depth is unaltered (512) Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Code Cleanup and EnhancementsRasesh Mody
Change details: - Remove unnecessary prefetch - Simplify checking & comparison of CQ flags - Dereference & store unmap_array, unmap_cons & current unmap_array element only once - Make structures tx_config & rx_config cache line aligned. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-12-11Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-12-11Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-12-11ath9k: check pdata variable before dereferencing itGabor Juhos
Due to my recent commit (ath9k: allow to load EEPROM content via firmware API) smatch complains about that the 'pdata' variable in 'ath9k_hw_init' can be NULL and it is dereferenced before checking that. That is absolutely correct. Check the 'pdata' variable before using it to avoid a NULL pointer dereference. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath5k: RX timestamp is reported at end of frameThomas Pedersen
This is true for at least AR5213, and shouldn't be different for other ath5k PHYs. Tested on AR2413 and AR5414. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Tested-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath9k_htc: RX timestamp is reported at end of frameThomas Pedersen
Accurate RX timestamp reporting is important for proper IBSS merging, mesh synchronization, and MCCA scheduling. Namely, knowing where the TSF is recorded is needed to sync with the beacon timestamp field. Tested with AR9271. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11ath9k: RX timestamp is reported at end of frameThomas Pedersen
Accurate RX timestamp reporting is important for proper IBSS merging, mesh synchronization, and MCCA scheduling. Namely, knowing where the TSF is recorded is needed to sync with the beacon timestamp field. Tested with AR9280. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11rt2800usb: reorganize 2001:3c1e in usb id table Wi-Fi adapterJohn W. Linville
Someone who physically disassembled the device confirms that its chipset is Ralink RT5370n. (Fixed-up after having already merged original patch. -- JWL) Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Reviewed-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-11net: smc911x: use io{read,write}*_rep accessorsMatthew Leach
The {read,write}s{b,w,l} operations are not defined by all architectures and are being removed from the asm-generic/io.h interface. This patch replaces the usage of these string functions in the smc911x accessors with io{read,write}{8,16,32}_rep calls instead. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: netdev@vger.kernel.org Signed-off-by: Matthew Leach <matthew@mattleach.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11tun: allow setting ethernet addresss while runningstephen hemminger
This is a pure software device, and ok with live address change. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bnx2x: use netdev_alloc_frag()Eric Dumazet
Using netdev_alloc_frag() instead of kmalloc() permits better GRO or TCP coalescing behavior, as skb_gro_receive() doesn't have to fallback to frag_list overhead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dmitry Kravkov <dmitry@broadcom.com> Cc: Eilon Greenstein <eilong@broadcom.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10iwlwifi: don't handle masked interruptEmmanuel Grumbach
This can lead to a panic if the driver isn't ready to handle them. Since our interrupt line is shared, we can get an interrupt at any time (and CONFIG_DEBUG_SHIRQ checks that even when the interrupt is being freed). If the op_mode has gone away, we musn't call it. To avoid this the transport disables the interrupts when the hw is stopped and the op_mode is leaving. If there is an event that would cause an interrupt the INTA register is updated regardless of the enablement of the interrupts: even if the interrupts are disabled, the INTA will be changed, but the device won't issue an interrupt. But the ISR can be called at any time, so we ought ignore the value in the INTA otherwise we can call the op_mode after it was freed. I found this bug when the op_mode_start failed, and called iwl_trans_stop_hw(trans, true). Then I played with the RFKILL button, and removed the module. While removing the module, the IRQ is freed, and the ISR is called (CONFIG_DEBUG_SHIRQ enabled). Panic. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10iwlwifi: silently ignore fw flaws in Tx pathEmmanuel Grumbach
We know that we have issues with the fw in the reclaim path. This is why iwl_reclaim doesn't complain too loud when it happens since it is recoverable. Somehow, the caller of iwl_reclaim however WARNed when it happens. This doesn't make any sense. When I digged into the history of that code, I discovered that this bug occurs only when we receive a BA notification. So move the W/A in the BA notification handling code where it was before. This patch addresses: http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2387 Cc: stable@vger.kernel.org Reported-by: Florian Reitmeir <florian@reitmeir.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10iwlwifi: iwlagn_request_scan: Fix check for priv->scan_requestTim Gardner
The WARN_ON_ONCE() check for scan_request will not correctly detect a NULL pointer for scan_type == IWL_SCAN_NORMAL. Make it explicit that the check only applies to normal scans. Convert WARN_ON_ONCE to WARN_ON since priv->scan_request really _can't_ be NULL for normal scans. If it is then we should emit frequent warnings. This smatch warning led to scrutiny of iwlagn_request_scan(): drivers/net/wireless/iwlwifi/dvm/scan.c:894 iwlagn_request_scan() error: we previously assumed 'priv->scan_request' could be null (see line 792) Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10b43: fix tx path skb leaksFelix Fietkau
ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath5k: fix tx path skb leaksFelix Fietkau
ieee80211_free_txskb() needs to be used instead of dev_kfree_skb_any for tx packets passed to the driver from mac80211 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: allow to load EEPROM content via firmware APIGabor Juhos
The calibration data for devices w/o a separate EEPROM chip can be specified via the 'eeprom_data' field of 'ath9k_platform_data'. The 'eeprom_data' is usually filled from board specific setup functions. It is easy if the EEPROM data is mapped to the memory, but it can be complicated if it is stored elsewhere. The patch adds support for loading of the EEPROM data via the firmware API to avoid this limitation. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read'Gabor Juhos
The 'ath9k_hw_nvram_read' function takes a 'struct ath_common *' as its first argument. Almost each of its caller has a 'struct ath_hw *' parameter in their argument list, and that is dereferenced in order to get the 'struct ath_common' pointer. Change the first argument of 'ath9k_hw_nvram_read' to be a 'struct ath_hw *', and remove the dereference calls from the callers. Also change the type of the first argument of the ar9300_eeprom_read_{byte,word} functions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: add EEPROM offset to debug messageGabor Juhos
Show the EEPROM offset of the failed read operation in 'ath9k_hw_nvram_read'. The debug message is more informative this way. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: move duplicated debug message to 'ath9k_hw_nvram_read'Gabor Juhos
The fill_eeprom functions are printing the same debug message in case the 'ath9k_hw_nvram_read' function fails. Remove the duplicated code from fill_eeprom functions and add the ath_dbg call directly into 'ath9k_hw_nvram_read'. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Fix signal strength / channel noise reportingFelix Fietkau
While AR_PHY_CCA_NOM_VAL_* does contain the expected internal noise floor for a chip measured in clean air, it refers to the lowest expected reading. Depending on the frequency, this measurement can vary by about 6db, thus causing a higher reported channel noise and signal strength. Factor in the 6db offset when converting internal noisefloor to channel noise. This patch makes the reported values more accurate for all chips without affecting NF calibration behavior. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10bcma: mips: fix clearing device IRQRafał Miłecki
We were using wrong IRQ number so clearing wasn't working at all. Depending on a platform this could result in a one device having two interrupts assigned. On BCM4706 this resulted in all IRQs being broken. Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: stable@vger.kernel.org Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Update intivals for AR9340Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Calculate the correct training power for PAPRDSujith Manoharan
Assign the training power for PAPRD based on the chip. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Add HW cap for PAPRDSujith Manoharan
Add a HW capability to indicate whether PAPRD is enabled for the card, since PAPRD could be enabled in the EEPROM, but disabled in the driver. This makes things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Fix PAPRD retraining for AR9485Sujith Manoharan
Retraining of PAPRD based on agc2_pwr is required for chips other than AR9485. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Various trivial fixes for PAPRDSujith Manoharan
* Remove unneeded memset. All the values in the PAPRD gain table are filled, so there is no need to zero out the arrays. * Use GFP_KERNEL in ar9003_paprd_create_curve This is called from the PAPRD work, so the atomic variant is not needed. * Change return type of ar9003_paprd_setup_gain_table Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: Fix redundant PS wrappersSujith Manoharan
Move the PowerSave wrappers outside ath_paprd_activate(), since they are already being used in ath_paprd_calibrate(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: Add a few debug messages for PAPRDSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Fix PAPRD trainingSujith Manoharan
The PAPRD training control registers have to be programmed with values that depend on the chip. This patch ensures that the correct values are chosen for the chip in use. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k_hw: Fix PAPRD registers for AR9485Sujith Manoharan
Various PAPRD registers are at addresses that are different from those for the rest of the chips in the AR9003 family. Fix them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: ar9003: fix OTP register offsets for AR9340Gabor Juhos
Trying to access the OTP memory on the AR9340 causes a data bus error like this: Data bus error, epc == 86e84164, ra == 86e84164 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 001f0041 00000000 7c7c7c3c $16 : 86ee0000 00015f18 00000000 00000007 $20 : 00000004 00000064 00000004 86d71c44 $24 : 00000000 86e6ca00 $28 : 86d70000 86d71b20 86ece0c0 86e84164 Hi : 00000000 Lo : 00000064 epc : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Tainted: G O ra : 86e84164 ath9k_hw_wait+0x58/0xb0 [ath9k_hw] Status: 1100d403 KERNEL EXL IE Cause : 4080801c PrId : 0001974c (MIPS 74Kc) Modules linked in: ath9k(O+) ath9k_common(O) ath9k_hw(O) ath(O) ar934x_nfc mac80211(O) usbcore usb_common scsi_mod nls_base nand nand_ecc nand_ids crc_ccitt cfg80211(O) compat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio Process insmod (pid: 459, threadinfo=86d70000, task=87942140, tls=779ac440) Stack : 802fb500 000200da 804db150 804e0000 87816130 86ee0000 00010000 86d71b88 86d71bc0 00000004 00000003 86e9fcd0 80305300 0002c0d0 86e74c50 800b4c20 000003e8 00000001 00000000 86ee0000 000003ff 86e9fd64 80305300 80123938 fffffffc 00000004 000058bc 00000000 86ea0000 86ee0000 000001ff 878d6000 99999999 86e9fdc0 86ee0fcc 86e9e664 0000c0d0 86ee0000 0000700000007000 ... Call Trace: [<86e84164>] ath9k_hw_wait+0x58/0xb0 [ath9k_hw] [<86e9fcd0>] ath9k_hw_setup_statusring+0x16b8/0x1c7c [ath9k_hw] Code: 0000a812 0040f809 00000000 <00531024> 1054000b 24020001 0c05b5dc 2404000a 26520001 The cause of the error is that the OTP register offsets are different on the AR9340 than the actually used values. Cc: <stable@vger.kernel.org> # 3.0+ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10rt2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapterMaia Kozheva
D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a Ralink chipset supported by the rt2800usb driver. Currently, to work around the problem (it's missing in all present kernel versions, up to and including 3.7.x), I had to add this to /etc/rc.local: echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id After that, the device works without problems. Been using it for over a week with no bugs in sight. The attached patch is trivial and simply adds the new USB ID to the list of devices handled by rt2800usb. Signed-off-by: Maia Kozheva <sikon@ubuntu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ssb: use WARN in main.cCong Ding
Use WARN rather than printk followed by WARN_ON(1), for conciseness. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10carl9170: fix copy and paste mishap in carl9170_handle_mpduChristian Lamparter
This patch fixes a regression which was introduced by: "carl9170: split up carl9170_handle_mpdu" Previously, the ieee80211_rx_status was kept on the stack of carl9170_handle_mpdu. Now it's passed into the function as a pointer parameter. Hence, the old memcpy call needs to be fixed. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10brcmsmac: add support for BCM43224 with PCI id of 14e4:a8d8Hauke Mehrtens
This device can be found on some embedded devices connected to a Broadcom SoC like the BCM4718. I tested this with my Netgear WNDR3400 v1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10brcmsmac: do a read after the write of the objmem on broken PCIe controllersHauke Mehrtens
As described in the documentation of bcma_wflush16 in drivers/net /wireless/brcm80211/brcmsmac/types.h some PCIe controllers of Broadcom SoCs are broken. The PCIe controller on these SoCs are mostly used to connect some additional wifi device to the SoC and some of these wifi devices are supported by brcmsmac. For my BCM43224 connected to the broken PCIe controller of the BCM4718 I need an extra read after write in brcms_b_write_objmem() to prevent a Data bus error. This fixes the problem reading tsf_random later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10ath9k: Fix regression in 'xmit' debugfs fileSujith Manoharan
Commit "ath9k: Fix the 'xmit' debugfs file" changed the the array size of ath_stats.txstats to IEEE80211_NUM_ACS, which is wrong because the HW queue number is used to update the statistics. Revert back to using ATH9K_NUM_TX_QUEUES. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10bcma: unify naming schema for clock functionsRafał Miłecki
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-12-10b43legacy: Fix firmware loading when driver is built into the kernelLarry Finger
Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space times out. The original fix for b43legacy (commit a3ea2c7) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43legacy is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. The remaining firmware files are read synchronously. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> (V3.4+) Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 22:58:16 +0000