summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-04-08vxge: Pass correct number of VFs value to pci_sriov_enable().Sreenivasa Honnur
- max_config_dev loadable parameter is set to 0xFF by default. Pass correct number of VFs value to pci_sriov_enable() if max_config_dev is set to its default value. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08vxge: Allow driver load for all enumerated pci functions.Sreenivasa Honnur
- Allow all instances of the driver be loaded when multiple pci functions are enumerated. The max_config_dev driver loadable option limits the driver load instances if required. The X3100's function configuration of single/multi function, SR and MR IOV allows the user to select the number of pci functions. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08vxge: Fix a possible memory leak in vxge_hw_device_initialize().Sreenivasa Honnur
- Fix a possible memory leak in vxge_hw_device_initialize(). Free hldev if vxge_hw_device_reg_addr_get() fails. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@exar.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07Revert "Add non-Virtex5 support for LL TEMAC driver"David S. Miller
This reverts commit 459569145516f7967b916c57445feb02c600668c. Uses virt_to_bus() and breaks the build. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07macb: allow reception of large (>1518 bytes) framesPeter Korsgaard
Enable BIG bit in the network configuration register, so the MAC doesn't reject big frames (E.G. when vlans are used). Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bnx2x: use the DMA API instead of the pci equivalentsFUJITA Tomonori
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Vladislav Zolotarov <vladz@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bnx2: use the dma state API instead of the pci equivalentsFUJITA Tomonori
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07virtio-net: move sg off stackMichael S. Tsirkin
Move sg structure off stack and into virtnet_info structure. This helps remove extra sg_init_table calls as well as reduce stack usage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07benet: fix the misusage of zero dma addressFUJITA Tomonori
benet driver wrongly assumes that zero is an invalid dma address (calls dma_unmap_page for only non zero dma addresses). Zero is a valid dma address on some architectures. The dma length can be used here. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07benet: use the dma state API instead of the pci equivalentsFUJITA Tomonori
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-073c503: Fix IRQ probingBen Hutchings
The driver attempts to select an IRQ for the NIC automatically by testing which of the supported IRQs are available and then probing each available IRQ with probe_irq_{on,off}(). There are obvious race conditions here, besides which: 1. The test for availability is done by passing a NULL handler, which now always returns -EINVAL, thus the device cannot be opened: <http://bugs.debian.org/566522> 2. probe_irq_off() will report only the first ISA IRQ handled, potentially leading to a false negative. There was another bug that meant it ignored all error codes from request_irq() except -EBUSY, so it would 'succeed' despite this (possibly causing conflicts with other ISA devices). This was fixed by ab08999d6029bb2c79c16be5405d63d2bedbdfea 'WARNING: some request_irq() failures ignored in el2_open()', which exposed bug 1. This patch: 1. Replaces the use of probe_irq_{on,off}() with a real interrupt handler 2. Adds a delay before checking the interrupt-seen flag 3. Disables interrupts on all failure paths 4. Distinguishes error codes from the second request_irq() call, consistently with the first Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07caif: tty's are kref objects so take a referenceAlan Cox
I don't think this can be abused in this case but do things properly. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07caif: check write operationsAlan Cox
write is optional for a tty device. Check that we have a write op rather than calling NULL. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: bump to 1.7Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: Use (dev|netdev|netif)_<level> macro helpersFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: implement set/get_msglevelFlorian Fainelli
{set,get}_msglevel is required to use netif_{err,dbg} macros. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: fix checkpatch errors.Florian Fainelli
This patch fixes multiple errors reported by checkpatch: - else not on the ending brace of an if { } - multiple occurences of for( instead of for ( - c99 comments - assignment and tests on the same line - test and statements on the same line - macro with complex value not between parenthesis - static variable with initialization value No functionnal change. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: prefix all functions with au1000_Florian Fainelli
In order to avoid namespace clashes, prefix all internal driver functions with au1000_. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: set MODULE_VERSIONFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07au1000-eth: allow driver to be compiled as a moduleFlorian Fainelli
This patch allows the au1000-eth driver to be compiled as a module. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-06NET: usb: Adding URB_ZERO_PACKET flag to usbnet.cElina Pasheva
This patch adds setting of the urb transfer flag URB_ZERO_PACKET before submitting an urb for drivers that have requested it (by advertising flag FLAG_SEND_ZLP). The modification is in usbnet.c function usbnet_start_xmit(). This patch only adds the zero length flag. A subsequent patch will address the buggy code we found when devices do not advertise FLAG_SEND_ZLP in which case there is a possibility of transferring packets with non-deterministic length. This patch has been tested on kernel-2.6.34-rc3. This patch has been checked against net-2.6 tree. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06net/irda: Add SuperH IrDA driver supportKuninori Morimoto
This is very simple driver for SuperH Mobile IrDA which support SIR/MIR/FIR. This patch add only SIR support for now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06net/irda: sh_sir: Modify iounmap wrong executionKuninori Morimoto
On sh_sir_probe function, there was a possibility that iounmap is executed even though self->membase was NULL when error case. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06net/irda: sh_sir: fixup err return value on sh_sir_openKuninori Morimoto
On sh_sir_open function, there was a possibility that err variable didn't have value even though it is return value. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Add non-Virtex5 support for LL TEMAC driverJohn Linn
This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06via-velocity: remove private #defineFrancois Romieu
Registers and their bits from mii.h. Courtesy from ed. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06NET: sb1250: Fix compile warning in driverRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Update version to 3.109Matt Carlson
This patch updates the tg3 version to 3.109. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Remove tg3_dump_state()Matt Carlson
The tg3_dump_state() function is commented out and doesn't get used much when debugging efforts are underway. The chip architecture has also changed enough that any debugging effort that might use it would have to tailor it to the capabilities of the hardware. This patch just removes the function entirely. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Cleanup if codestyleMatt Carlson
This patch cleans up the code style as it pertains to if statements. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: The case of switchesMatt Carlson
This patch fixes checkpatch errors related to switch statements. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Whitespace, constant, and comment updatesMatt Carlson
This patch fixes whitespace errors, preprocessor definition placement oddities and updates comments. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Use VPD fw version when presentMatt Carlson
This patch extracts the firmware version from the VPD area and changes the code to prefer that version version over the manually extracted version. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Prepare FW version code for VPD versioningMatt Carlson
The code that extracts the firmware version from the device's NVRAM assumes the firmware version member is a clean slate. The following patch will add code to extract the firmware version from the VPD area of NVRAM, so this assumption will no longer be true. This patch adjusts the versioning code to respect the VPD version if it exists. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Fix message 80 char violationsMatt Carlson
Commit 05dbe005386e7521153dce6c5ad95c98b73b80c7, "Use (pr|netdev)_<level> macro helpers" extended some of the message lines longer than 80 chars. This patch reels the line lengths back in. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: netdev_err() => dev_err()Matt Carlson
Some uses of netdev_err() happen before the device has been registered. This will cause the messages to be prepended with "(unregistered net_device)" strings. We can clean up the message by using dev_err() instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Replace pr_err with sensible alternativesMatt Carlson
All the instances of pr_err() in the tg3 driver have better alternatives. This patch replaces all pr_err() calls. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Restore likely() check in tg3_poll_msix()Matt Carlson
When creating the new tg3_poll_msix() function, the likely() compiler hint was dropped. This patch reintroduces it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06tg3: Fix MII_TG3_DSP_EXP8 offsetMatt Carlson
The offset to the MII_TG3_DSP_EXP8 register is incorrect. Fix it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03smc91c92_cs: fix the problem of "Unable to find hardware address"Ken Kawasaki
smc91c92_cs: *cvt_ascii_address returns 0, if success. *call free_netdev, if we can't find hardware address. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03ppp: Add ppp_dev_name() exported functionJames Chapman
ppp_dev_name() gives PPP users visibility of a ppp channel's device name. This can be used by L2TP drivers to dump the assigned PPP interface name. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03l2tp: Split pppol2tp patch into separate l2tp and ppp partsJames Chapman
This patch splits the pppol2tp driver into separate L2TP and PPP parts to prepare for L2TPv3 support. In L2TPv3, protocols other than PPP can be carried, so this split creates a common L2TP core that will handle the common L2TP bits which protocol support modules such as PPP will use. Note that the existing pppol2tp module is split into l2tp_core and l2tp_ppp by this change. There are no feature changes here. Internally, however, there are significant changes, mostly to handle the separation of PPP-specific data from the L2TP session and to provide hooks in the core for modules like PPP to access. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03l2tp: Relocate pppol2tp driver to new net/l2tp directoryJames Chapman
This patch moves the existing pppol2tp driver from drivers/net into a new net/l2tp directory, which is where the upcoming L2TPv3 code will live. The existing CONFIG_PPPOL2TP config option is left in its current place to avoid "make oldconfig" issues when an existing pppol2tp user takes this change. (This is the same approach used for the pppoatm driver, which moved to net/atm.) There are no code changes. The existing drivers/net/pppol2tp.c is simply moved to net/l2tp. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03net: move address list functions to a separate fileJiri Pirko
+little renaming of unicast functions to be smooth with multicast ones Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: update version to 5.0.1Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: fix endianness in fw validationAmit Kumar Salecha
cpu_to_le32 was missing and used improperly. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: fix interface attach sequenceAmit Kumar Salecha
Interface should be visible even if resource allocation fails. netif_device_attach should be called for every netif_device_detach. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03qlcnic: add driver debug supportAmit Kumar Salecha
Add debug print in driver, can be tuned by ethtool msg level callback. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-26 19:26:43 +0000