summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-12-09iwlwifi: mvm: don't configure mimo rates if nss is limited to 1Eyal Shapira
Remote peer can publish a different number of supported nss via the operating mode notification IE or action frame. If it limits to 1 then we don't want mimo rates configured in the rate table. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: don't enable VHT MCS9 in 20MhzEyal Shapira
MCS9 in NSS=1 or NSS=2 isn't valid for 20Mhz so don't enable it in case we're dealing with a 20Mhz sta. Trying to configure an MCS9 rate with 20Mhz in the LQ rate table would lead to a FW assert. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: stop using MIMO in case BT doesn't allow itEyal Shapira
Switch to using the new btcoex decision api regarding MIMO and stop accessing the internal btcoex structs. In case MIMO should be disabled it would detect this upon the next Tx and force a search. The search will switch to SISO on a antenna A which isn't used by BT. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: quota command max_duration should be zeroJohannes Berg
For now, the firmware doesn't really use the field, but it should be set to zero if there's no specific request. Setting it to the max quota doesn't make sense. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: Implement low-priority scanHaim Dreyfuss
Advertise driver's support for low priority scan. Notice that this overwrites current setting by mac80211 which depends only on hw scan support. This scan priority can be configured by user space application and it affects scan continuity, low priority scan will be more fragmented scan. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: fix scan offloading flag definitionEliad Peller
Bit 0 in the scan offloading flags asks the filter to pass all the results (instead of filtering them, by default), rather than the other way around (like it is defined and used today). Fix the flag name appropriately, and fix its user. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: dump NVM from debugfsEmmanuel Grumbach
This allows to see the content of the NVM the driver reads. Note that the output is in binary, and requires some external user space tool to display the data properly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: don't restart HW if suspending fails before D3 image is loadedLuciano Coelho
If we haven't loaded the D3 image yet and a failure in the suspend process occurs, we shouldn't restart the HW, because we're still running the D0 image. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: add iwl_mvm_sta_from_mac80211Johannes Berg
This is just a helper function to go from the mac80211 station struct to our internal one, to later allow us to avoid temporary 'mvmsta' variables. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: fix check for a single rx antennaEyal Shapira
valid_rx_ant is a bitmask of available antennas and not the number of Rx antennas. Use num_of_ant and remove duplicate definitions in both dvm and mvm. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: pcie: remove minor dead codeMichal Nazarewicz
inta is checked to be zero in a IRQ_NONE branch so afterwards it cannot be zero as it is never modified. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> [reword the patch title and fix comment] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: a few more SKUs for 7260 and 3160Emmanuel Grumbach
These devices are not sold as discrete modules but are rather soldered down to the board. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: BT Coex - fine tune the aggregation sizeEmmanuel Grumbach
Latest tests have shown that when BT is active and has connections but the traffic is low, the WiFi aggregation can be large up to 4000us without noticeable impact on BT. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: add LQ flags definitionsEyal Shapira
Add more bit field definitions used in LQ flags. Also rename the first bit to a shorter name. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: refactor debugfs copy_from_user()Johannes Berg
Abstract the copy_from_user() pattern into the macros defining debugfs files, reducing the code and making adding new files safer by avoiding having deal with copy_from_user() directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: don't use void pointers in debugfsJohannes Berg
There's really no reason to use void *dbgfs_data rather than a struct iwl_mvm *mvm, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: move interface-specific debugfs to a new fileJohannes Berg
The debugfs file is getting pretty large and mixed up between code for the hardware and code for each interface (the two aren't even clearly separated in the code). Make it easier to handle by splitting the per-interface code into a separate file called debugfs-vif.c. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: small debugfs cleanupsJohannes Berg
Just clean up the code a bit, in particular * make all the debugfs writes follow the same pattern with respect to buf/buf_size variables * get rid of useless comments * check return values of all file creations * drop unnecessary parentheses * remove an unused struct definition * fix some whitespace Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: fix ht protection flagsAvri Altman
The HT protection flags have been a mess for a long time, this patch fixes all this. The proper source of information for this is the protection in the HT operation mode IE which is propagated to bss_conf by mac80211. 1) No need to set the HT protection flags when the link doesn't support HT. 2) We need to set the TGG protection when ERP is active. Signed-off-by: Avri Altman <avri.altman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: allow keeping connections in d3_testEliad Peller
Keeping connection can be useful also when testing d3 using the debugfs file (d3_test). Save the vif to keep connection on, and consider it when iterating over the interfaces. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: implement rate_update hook in rsEyal Shapira
Re-initialize rs when we get a rate_update hook called which happens when remote STA changes bandwidth or sends a VHT opmode notification. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: disconnect on disconnection wakeup eventEliad Peller
When waking up from d3 due to disconnection event (e.g. because of beacon loss), we should disconnect immediately. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: enable d3_test even if d3_test_pme_ptr is not availableEliad Peller
Even if d3_test_pme_ptr is not available, d3_test can still be useful, e.g. by manually triggering resume (with ctrl-c), and reading the wakeup reasons. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: refactor iwl_mvm_rs_rate_initEyal Shapira
Refactor setting of VHT enabled rates in preparation of adding some more logic there. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: simplify iwl_mvm_send_lq_cmdEyal Shapira
Remove the flags parameter which should be set to sync or async according to whether this is called during sta init or not. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: fix and improve printing of rate scale tableEyal Shapira
Info about VHT/HT rates wasn't printed properly when dumping the rate scale table. Fix that and print more info. While at it fix some other minor issues in the printing and prevent overflowing the print buffer. Signed-off-by: Eyal Shapira <eyal@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: pcie: remove useless condition testJohannes Berg
After wait_event_timeout(), the condition must still be true if it returns >0, in fact almost the last thing in it is checking the condition again. It's therefore not useful to check yet again in our code, clean it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: Add debugfs entry to generate NMI to NICAlexander Bondar
Writting to fw_nmi entry will set DEVICE_SET_NMI_REG (0x00a01c30) generating NMI that halts NIC CPU. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: remove TX_CMD id from transport layerEmmanuel Grumbach
The transport layer doesn't need to know the TX_CMD id. It can be set by the op_mode. The transport layer still needs to know the layout of the Tx command because of alignment issues and because of the scratch pointer. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/Kconfig net/mac80211/util.c
2013-12-05ath: fix dynamic user regulatory domain supportLuis R. Rodriguez
As it stands dynamic user regulatory domain support is only possible for a few programmed regulatory domains as a few countries do not allow for this. The existing code however only would take advantage of the feature if a custom world regulatory domain is used though as that's when we clear beconing flags. We need to lift this restriction as otherwise this feature is pointless. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: dynamic user allow check helper to the topLuis R. Rodriguez
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move dynamic_country_user_possible() to the topLuis R. Rodriguez
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix usage of freq_reg_info()Luis R. Rodriguez
freq_reg_info() expects KHz and not MHz, fix this. In this case we'll now be getting the no-ir flags cleared on channels for any channel when the country IE trusts that channel. @@ struct ieee80211_channel *ch; struct wiphy *wiphy; const struct ieee80211_reg_rule *rule; @@ -rule = freq_reg_info(wiphy, ch->center_freq); +rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq)); Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Reported-by: Mihir Shete <smihir@qti.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move the channel for ath_reg_apply_beaconing_flags() into helperLuis R. Rodriguez
While at it convert this into a switch statement, this makes it easier and manage. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: simplify ath_reg_apply_beaconing_flags()Luis R. Rodriguez
Simplify ath_reg_apply_beaconing_flags() by making use of thew new no-ir helper. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: rename ath_reg_apply_active_scan_flags() to ath_reg_apply_ir_flags()Luis R. Rodriguez
This also applies the no-ibss flag to the channels or clears it. The idea here is to clarify no initiated radiation should be allowed on these channels. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: clean up ath_reg_apply_active_scan_flags()Luis R. Rodriguez
The routine ath_reg_apply_active_scan_flags() can be a bit hard to read, this cleans it up by adding helpers for the two cases of clearing IR flags or adding them. This approach also makes no assumptions on the index of channels 12 and 13 so it should be portable accross different drivers. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix logic on ath_reg_apply_active_scan_flags()Luis R. Rodriguez
The existing logic removes the passive scan flag from channels 12 and 13 when a regulatory hint coming from something other than a country IE has been passed. This is incorrect, the original intention was to ensure we always have passive scan enabled for these two channels for a specific set of custom world regulatory domains. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: fix typo errorChun-Yeow Yeoh
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8188ee: Fix typo in codeLarry Finger
The static analyser "cppcheck" shows the following typo: drivers/net/wireless/rtlwifi/rtl8188ee/dm.c:1081]: (style) Same expression on both sides of '!='. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Stable <stable@vger.kernel.org> [3.10+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05bcma: pci: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: libertas: remove unnecessary spi_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: rt2x00: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: prism54: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: ipw2100: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05brcmsmac: remove dependency on CRC8 and CRC_CCITTHauke Mehrtens
There is no code in brcmsmac that uses a function from CRC8 or CRC_CCITT any more. Building brcmsmac with these two disabled works without any problems. This was probably only used by the bus code which was replaced by bcma some time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath9k: fix retry chain initialization in tx99 codeLorenzo Bianconi
Initialize first chain attempt counter to 1 in ath9k_build_tx99_skb(). Otherwise multi-retry chain is initialized to {idx,count} = {-1, 0} in rate_control_fill_sta_table() and tx99 transmission rate is not configured in rate_control_apply_mask() since first chain idx is set to -1 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: set self STA default HT parametersChun-Yeow Yeoh
These default HT parameters are required for self STA entry. In example, set the HT capable of self STA entry for bss configuration in mesh allows the MCS rate to be used. Otherwise, only legacy rate will be used. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05libertas sdio: claim device before calling sdio_disable_func()Alexey Khoroshilov
There is a failure path in if_sdio_power_on(), where sdio_disable_func() is called without claiming the device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:17:55 +0000