summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-12pohmelfs: double-free and leakAl Viro
wrong dentry dropped... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits) cxgb4vf: recover from failure in cxgb4vf_open() netfilter: ebtables: make broute table work again netfilter: fix race in conntrack between dump_table and destroy ah: reload pointers to skb data after calling skb_cow_data() ah: update maximum truncated ICV length xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC ehea: Increase the skb array usage net/fec: remove config FEC2 as it's used nowhere pcnet_cs: add new_id tcp: disallow bind() to reuse addr/port net/r8169: Update the function of parsing firmware net: ppp: use {get,put}_unaligned_be{16,32} CAIF: Fix IPv6 support in receive path for GPRS/3G arp: allow to invalidate specific ARP entries net_sched: factorize qdisc stats handling mlx4: Call alloc_etherdev to allocate RX and TX queues net: Add alloc_netdev_mqs function caif: don't set connection request param size before copying data cxgb4vf: fix mailbox data/control coherency domain race qlcnic: change module parameter permissions ...
2011-01-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (72 commits) powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA powerpc/pseries: Fix VPHN build errors on non-SMP systems powerpc/83xx: add mpc8308_p1m DMA controller device-tree node powerpc/83xx: add DMA controller to mpc8308 device-tree node powerpc/512x: try to free dma descriptors in case of allocation failure powerpc/512x: add MPC8308 dma support powerpc/512x: fix the hanged dma transfer issue powerpc/512x: scatter/gather dma fix powerpc/powermac: Make auto-loading of therm_pm72 possible of/address: Use propper endianess in get_flags powerpc/pci: Use printf extension %pR for struct resource powerpc: Remove unnecessary casts of void ptr powerpc: Disable VPHN polling during a suspend operation powerpc/pseries: Poll VPA for topology changes and update NUMA maps powerpc: iommu: Add device name to iommu error printks powerpc: Record vma->phys_addr in ioremap() powerpc: Update compat_arch_ptrace powerpc: Fix PPC_PTRACE_SETHWDEBUG on PPC_BOOK3S powerpc/time: printk time stamp init not correct powerpc: Minor cleanups for machdep.h ...
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Fix refcount leak in lkey/rkey validation IB/qib: Improve SERDES tunning on QMH boards IB/qib: Unnecessary delayed completions on RC connection IB/qib: Issue pre-emptive NAKs on eager buffer overflow IB/qib: RDMA lkey/rkey validation is inefficient for large MRs IB/qib: Change QPN increment IB/qib: Add fix missing from earlier patch IB/qib: Change receive queue/QPN selection IB/qib: Fix interrupt mitigation IB/qib: Avoid duplicate writes to the rcv head register IB/qib: Add a few new SERDES tunings IB/qib: Reset packet list after freeing IB/qib: New SERDES init routine and improvements to SI quality IB/qib: Clear WAIT_SEND flags when setting QP to error state IB/qib: Fix context allocation with multiple HCAs IB/qib: Fix multi-Florida HCA host panic on reboot IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE better IB/qib: UD send with immediate receive completion has wrong size IB/qib: Set port physical state even if other fields are invalid IB/qib: Generate completion callback on errors ...
2011-01-11cxgb4vf: recover from failure in cxgb4vf_open()Casey Leedom
If the Link Start fails in cxgb4vf_open(), we need to back out any state that we've built up ... Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11ehea: Increase the skb array usageBreno Leitao
Currently the skb array is not fully allocated, and the allocation is done as it's requested, which is not the expected way. This patch just allocate the full skb array at driver initialization. Also, this patch increases ehea version to 107. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11net/fec: remove config FEC2 as it's used nowhereShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11Merge branch 'timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rtc: Namespace fixup RTC: Remove UIE emulation RTC: Rework RTC code to use timerqueue for events Fix up trivial conflict in drivers/rtc/rtc-dev.c
2011-01-11Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) perf session: Fix infinite loop in __perf_session__process_events perf evsel: Support perf_evsel__open(cpus > 1 && threads > 1) perf sched: Use PTHREAD_STACK_MIN to avoid pthread_attr_setstacksize() fail perf tools: Emit clearer message for sys_perf_event_open ENOENT return perf stat: better error message for unsupported events perf sched: Fix allocation result check perf, x86: P4 PMU - Fix unflagged overflows handling dynamic debug: Fix build issue with older gcc tracing: Fix TRACE_EVENT power tracepoint creation tracing: Fix preempt count leak tracepoint: Add __rcu annotation tracing: remove duplicate null-pointer check in skb tracepoint tracing/trivial: Add missing comma in TRACE_EVENT comment tracing: Include module.h in define_trace.h x86: Save rbp in pt_regs on irq entry x86, dumpstack: Fix unused variable warning x86, NMI: Clean-up default_do_nmi() x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPU x86, NMI: Remove DIE_NMI_IPI x86, NMI: Add priorities to handlers ...
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (39 commits) mmc: davinci: add support for SDIO irq handling mmc: fix division by zero in MMC core mmc: tmio_mmc: fix CMD irq handling mmc: tmio_mmc: handle missing HW interrupts mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc mmc: tmio_mmc: implement SDIO IRQ support mfd: sdhi: require the tmio-mmc driver to bounce unaligned buffers mmc: tmio_mmc: silence compiler warnings mmc: tmio_mmc: implement a bounce buffer for unaligned DMA mmc: tmio_mmc: merge the private header into the driver mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failure mmc: tmio_mmc: allow multi-element scatter-gather lists mmc: Register debugfs dir before calling card probe function. mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK. mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan. mmc: Fix sd/sdio/mmc initialization frequency retries mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap mmc: dw_mmc: Add Synopsys DesignWare mmc host driver. mmc: add sdhci-tegra driver for Tegra SoCs mmc: sdhci: add quirk for max len ADMA descriptors ...
2011-01-11Merge remote branch 'gcl/next' into nextBenjamin Herrenschmidt
2011-01-10Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and ↵Roland Dreier
'srp' into for-next
2011-01-10IB/qib: Fix refcount leak in lkey/rkey validationMike Marciniszyn
The mr optimization introduced a reference count leak on an exception test. The lock/refcount manipulation is moved down and the problematic exception test now calls bail to insure that the lock is released. Additional fixes as suggested by Ralph Campbell <ralph.campbell@qlogic.org>: - reduce lock scope of dma regions - use explicit values on returns vs. automatic ret value Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Improve SERDES tunning on QMH boardsMike Marciniszyn
Improve the QMH SERDES tunning on initial driver load by having the driver go through a link state change. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Unnecessary delayed completions on RC connectionMike Marciniszyn
Currently on receipt of a response message (ACKs, RDMA Response, Atomic Responses etc.) if the SDMA completion counter is not advanced the driver delays the completion of the WQE. In most cases this is overly pessimistic as the response (ACK) to a previously transmitted send implies that the send is complete. Ensure that SDMA queue is progressed appropriately before determining if a send has delayed completions. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Issue pre-emptive NAKs on eager buffer overflowMike Marciniszyn
Under congestion resulting in eager buffer overflow attempt to send pre-emptive NAKs if header queue entries with TID errors are generated and a valid header is present. This prevents long timeouts and flow restarts if a trailing set of packets are dropped due to eager overflows. Pre-emptive NAKs are currently only supported for RDMA writes. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: RDMA lkey/rkey validation is inefficient for large MRsMike Marciniszyn
The current code loops during rkey/lkey validiation to isolate the MR for the RDMA, which is expensive when the current operation is inside a very large memory region. This fix optimizes rkey/lkey validation routines for user memory regions and fast memory regions. The MR entry can be isolated by shifts/mods instead of looping. The existing loop is preserved for phys memory regions for now. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change QPN incrementMike Marciniszyn
Changing from +1 to +2 allows for better QP distribution across receive contexts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add fix missing from earlier patchMike Marciniszyn
The upstream code was missing part of a receive/error race fix from the internal tree. Add the missing part, which makes future merges possible. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Change receive queue/QPN selectionMike Marciniszyn
The basic idea is that on SusieQ, the difficult part of mapping QPN to context is handled by the mapping registers so the generic QPN allocation doesn't need to worry about chip specifics. For Monty and Linda, there is no mapping table so the qpt->mask (same as dd->qpn_mask), is used to see if the QPN to context falls within [zero..dd->n_krcv_queues). Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix interrupt mitigationMike Marciniszyn
For SusieQ we need to write to the interrupt timer register before updating the header queue head with interrupt count. This is to ensure that the timer is enabled properly and a receive available interrupt is delivered. Otherwise this interrupt can be lost if the receiver header/eager queues are full before the timer is enabled. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Avoid duplicate writes to the rcv head registerMike Marciniszyn
Avoid duplicate writes to the head register as this can lead to lost interrupts if the context goes full before the second write is done. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add a few new SERDES tuningsMike Marciniszyn
Add new SERDES tuning to aid manufacturing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Reset packet list after freeingMike Marciniszyn
Reset the list pointers after freeing the SDMA packet list. This is done to any potential double-free cases. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: New SERDES init routine and improvements to SI qualityMike Marciniszyn
Implement new SERDES initialization routine and improvements to signal integrity -- disable LE1 adaptation, disable LOS after link-up, set better SERDES parameters. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Clear WAIT_SEND flags when setting QP to error stateMike Marciniszyn
If these flags are set when the QP is transitioned to the error state, it will wait until the flags are cleared, which may never happen if the error transition is due to a link going down. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix context allocation with multiple HCAsMike Marciniszyn
The driver was incorrectly choosing HCAs on which to allocate new user contexts based on overall count of usable ports regardless whether the usable port was on the currently selected HCA. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Fix multi-Florida HCA host panic on rebootMike Marciniszyn
Add check when setting configured contexts that the value does not exceed the number of contexts allocated for the card. If the value exceeds the already allocated count, set it to what is already allocated. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Handle transitions from ACTIVE_DEFERRED to ACTIVE betterMike Marciniszyn
When the link transitions from ACTIVE_DEFERRED to ACTIVE, the driver only sees the ACTIVE state. With this change, it will check whether the state was already ACTIVE and if so, it will not generated IB events and will not clear symbol error counts. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: UD send with immediate receive completion has wrong sizeMike Marciniszyn
The code to generate receive completion entries for UD send with immediate contains the wrong payload length. This is because when the code to compute the payload size was moved, the value of hdrsize didn't get moved too. The fix is to update tlen directly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Set port physical state even if other fields are invalidMike Marciniszyn
The IBTA vol. 1 release 1.2.1 spec. says: C14-24.2.1: If PortInfo:Portstate=Down, then a SubnSet(PortInfo) shall make any changes it specifies to PortInfo:PortPhysicalState; any other result is vendor-dependent. The patch changes the error handling so that the reply says there are invalid fields but still attempts to set fields that are in range including PortInfo:PortPhysicalState. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Generate completion callback on errorsMike Marciniszyn
According to IBTA vol. 1, C11-30.1.1, a notification callback is invoked if the CQ is armed for the next solicited completion event or an error completion. The error case wasn't being generated correctly. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add support for the new QME7362 cardMike Marciniszyn
Add support to recognize another board variation named QME7362. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Add receive header queue size module parametersMike Marciniszyn
The receive header queue sizes need to modified for performance tuning. Three module parameters are added to support this. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/qib: Remove IB latency turnoffMike Marciniszyn
This is required for hardware testing. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10RDMA/nes: Fix string continuation lineJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/mthca: Handle -ENOMEM in forward_trap()Dan Carpenter
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/mlx4: Handle -ENOMEM in forward_trap()Dan Carpenter
ib_create_send_mad() can return ERR_PTR(-ENOMEM) here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4_core: Avoid vunmap() of invalid pointer if allocation failsAli Ayoub
Signed-off-by: Ali Ayoub <ali@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/mlx4: Don't call dma_free_coherent() with irqs disabledVladimir Sokolovsky
mlx4_ib_free_cq_buf() should not be called under spin_lock_irq() since it calls dma_free_coherent(), which needs irqs enabled. Fix this by deferring the free to outside the locked region. This was found due to the WARN_ON(irqs_disabled()); in swiotlb_free_coherent(). Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10mlx4_core: Remove warning message about firmware bugRoland Dreier
The kernel warning message added in commit 58d74bb1d9f7 ("mlx4_core: Workaround firmware bug in query dev cap") about mlx4 reporting the wrong number of "blue flame registers" doesn't really help anyone, since the firmware bug is known and fixed and the bug is pretty much harmless to users. So just get rid of the warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IPoIB: Add GRO supportOr Gerlitz
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IPoIB: Remove LRO supportOr Gerlitz
As a first step in moving from LRO to GRO, revert commit af40da894e9 ("IPoIB: add LRO support"). Also eliminate the ethtool set_flags callback which isn't needed anymore. Finally, we need to include <linux/sched.h> directly to get the declaration of restart_syscall() (which used to be included implicitly through <linux/inet_lro.h>). Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/ipath: Use printf extension %pR for struct resourceJoe Perches
Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10RDMA/cxgb4: Don't re-init wait object in init/fini pathsSteve Wise
Re-initializing the wait object in rdma_init()/rdma_fini() causes a timing window which can lead to a deadlock during close. Once this deadlock hits, all RDMA activity over the T4 device will be stuck. There's no need to re-init the wait object, so remove it. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10RDMA/cxgb3,cxgb4: Remove dead codeStephen Hemminger
This removes unused code found by running 'make namespacecheck'; compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10Merge branch 'drm-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (390 commits) drm/radeon/kms: disable underscan by default drm/radeon/kms: only enable hdmi features if the monitor supports audio drm: Restore the old_fb upon modeset failure drm/nouveau: fix hwmon device binding radeon: consolidate asic-specific function decls for pre-r600 vga_switcheroo: comparing too few characters in strncmp() drm/radeon/kms: add NI pci ids drm/radeon/kms: don't enable pcie gen2 on NI yet drm/radeon/kms: add radeon_asic struct for NI asics drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init drm/radeon/kms: add ucode loader for NI drm/radeon/kms: add support for DCE5 display LUTs drm/radeon/kms: add ni_reg.h drm/radeon/kms: add bo blit support for NI drm/radeon/kms: always use writeback/events for fences on NI drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5 drm/radeon/kms: add backend map workaround for barts drm/radeon/kms: fill gpu init for NI asics drm/radeon/kms: add disabled vbios accessor for NI asics drm/radeon/kms: handle NI thermal controller ...
2011-01-10Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Constify i2c_client where possible i2c-algo-bit: Complain about masters which can't read SCL i2c-algo-bit: Refactor adapter registration i2c: Add generic I2C multiplexer using GPIO API i2c-nforce2: Remove unnecessary cast of pci_get_drvdata i2c-i801: Include <linux/slab.h>
2011-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (52 commits) Blackfin: encode cpu-rev into uImage name Blackfin: bf54x: don't ack GPIO ints when unmasking them Blackfin: sram_free_with_lsl: do not ignore return value of sram_free Blackfin: boards: add missing "static" to peripheral lists Blackfin: DNP5370: new board port Blackfin: bf518f-ezbrd: fix dsa resources Blackfin: move "-m elf32bfin" to general LDFLAGS Blackfin: kgdb_test: make sure to initialize num2 Blackfin: kgdb: disable preempt schedule when running single step in kgdb Blackfin: kgdb: disable interrupt when single stepping in ADEOS Blackfin: SMP: kgdb: apply anomaly 257 work around Blackfin: fix building IPIPE code when XIP is enabled Blackfin: SMP: kgdb: flush core internal write buffer before flushinv Blackfin: sport_uart resources: remove unused secondary RX/TX pins Blackfin: tll6527m: fix spelling in unused code (struct name) Blackfin: bf527-ezkit: add adau1373 chip address Blackfin: no-mpu: fix masking of small uncached dma region Blackfin: pm: drop irq save/restore in standby and suspend to mem callback MAINTAINERS: update Analog Devices support info Blackfin: dpmc.h: pull in new pll.h ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 22:30:16 +0000