summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-06-12myri10ge: limit the number of recoveriesBrice Goglin
Limit the number of recoveries from a NIC hw watchdog reset to 1 by default. It enables detection of defective NICs immediately since these memory parity errors are expected to happen very rarely (less than once per century*NIC). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12NetXen: Fix link status messagesMithlesh Thukral
NetXen: Fix incorrect link status even with switch turned OFF. NetXen driver failed to accurately indicate when a link is up or down. This was encountered during failover testing, when the first port indicated that the link was up even when the 10G switch it was assigned to in the Bladecenter was turned off completely. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-12Revert "[netdrvr e100] experiment with doing RX in a similar manner to eepro100"Jeff Garzik
This reverts commit d52df4a35af569071fda3f4eb08e47cc7023f094. This patch attempted to fix e100 for non-cache coherent memory architectures by using the cb style code that eepro100 had and using the EL and s bits from the RFD list. Unfortunately the hardware doesn't work exactly like this and therefore this patch actually breaks e100. Reverting the change brings it back to the previously known good state for 2.6.22. The pending rewrite in progress to this code can then be safely merged later. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09net: fix typo in drivers/net/usb/KconfigSam Ravnborg
Replace invisible character with a space. The diff looks like this on my terminal: - <A0>Choose this option if you're using a host-to-host cable - <A0>with one of these chips. + Choose this option if you're using a host-to-host cable + with one of these chips. Reported by: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09phylib: add RGMII-ID mode to the Marvell m88e1111 PHY to fix broken ucc_gethKim Phillips
Support for configuring RGMII-ID (RGMII with internal delay) mode on the 88e1111 and 88e1145. Ucc_geth on MPC8360EMDS(the main user of ucc_geth) is broken after changed to use phylib. It is fixed by adding this internal delay. Also renamed 88e1111s -> 88e1111 (no references to an 88e1111s part were found), and fixed some whitespace. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09ehea: Fixed possible kernel panic on VLAN packet recvThomas Klein
This patch fixes a possible kernel panic due to not checking the vlan group when processing received VLAN packets and a malfunction in VLAN/hypervisor registration. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09NetXen: Fix compile failure seen on PPC architectureMithlesh Thukral
NetXen: Add NETXEN prefixes to macros to clean them up. This is a cleanup patch which adds NETXEN prefix to some stand alone macro names. These posed compile errors when NetXen driver was backported to 2.6.9 on PPC architecture as macros like USER_START are defined in file arch/ppc64/mm/hash_utils.c Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Acked-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09NetXen: Fix ping issue after reboot on Blades with 3.4.19 firmwareMithlesh Thukral
NetXen: Fix initialization and subsequent ping issue on 3.4.19 firmware This patch fixes the ping problem seen X/PBlades after the adapter's firmware was moved to 3.4.19. After configured interface up, ping failed. NetXen adapter couldn't accept ARP broadcast packet. Manual addition of MAC address in the ARP table, made ping work. NetXen adapter should finish initilization after system boot. But looks NetXen adapter didn't initilization correctly after system boot up. So have to re-load the firmware again in probe routine. Also re-initilization netxen_config_0 and netxen_config_1 registers. Signed-off by: Wen Xiong <wenxiong@us.ibm.com> Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09typo in via-velocity.cDave Jones
http://bugzilla.kernel.org/show_bug.cgi?id=8160 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09ibmveth: Automatically enable larger rx buffer pools for larger mtuBrian King
Currently, ibmveth maintains several rx buffer pools, which can be modified through sysfs. By default, pools are not allocated by default such that jumbo frames cannot be supported without first activating larger rx buffer pools. This results in failures when attempting to change the mtu. This patch makes ibmveth automatically allocate these larger buffer pools when the mtu is changed. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09ibmveth: Fix h_free_logical_lan error on pool resizeBrian King
When attempting to activate additional rx buffer pools on an ibmveth interface that was not yet up, the error below was seen. The patch fixes this by only closing and opening the interface to activate the resize if the interface is already opened. (drivers/net/ibmveth.c:597 ua:30000004) ERROR: h_free_logical_lan failed with fffffffffffffffc, continuing with close Unable to handle kernel paging request for data at address 0x00000ff8 Faulting instruction address: 0xd0000000002540e0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=128 NUMA PSERIES LPAR Modules linked in: ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle ipta ble_nat ip_nat iptable_filter ip6table_mangle ip_conntrack nfnetlink ip_tables i p6table_filter ip6_tables x_tables ipv6 apparmor aamatch_pcre loop dm_mod ibmvet h sg ibmvscsic sd_mod scsi_mod NIP: D0000000002540E0 LR: D0000000002540D4 CTR: 80000000001AF404 REGS: c00000001cd27870 TRAP: 0300 Not tainted (2.6.16.46-0.4-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 24242422 XER: 00000007 DAR: 0000000000000FF8, DSISR: 0000000040000000 TASK = c00000001ca7b4e0[1636] 'sh' THREAD: c00000001cd24000 CPU: 0 GPR00: D0000000002540D4 C00000001CD27AF0 D000000000265650 C00000001C936500 GPR04: 8000000000009032 FFFFFFFFFFFFFFFF 0000000000000007 000000000002C2EF GPR08: FFFFFFFFFFFFFFFF 0000000000000000 C000000000652A10 C000000000652AE0 GPR12: 0000000000004000 C0000000004A3300 00000000100A0000 0000000000000000 GPR16: 00000000100B8808 00000000100C0F60 0000000000000000 0000000010084878 GPR20: 0000000000000000 00000000100C0CB0 00000000100AF498 0000000000000002 GPR24: 00000000100BA488 C00000001C936760 D000000000258DD0 C00000001C936000 GPR28: 0000000000000000 C00000001C936500 D000000000265180 C00000001C936000 NIP [D0000000002540E0] .ibmveth_close+0xc8/0xf4 [ibmveth] LR [D0000000002540D4] .ibmveth_close+0xbc/0xf4 [ibmveth] Call Trace: [C00000001CD27AF0] [D0000000002540D4] .ibmveth_close+0xbc/0xf4 [ibmveth] (unreliable) [C00000001CD27B80] [D0000000002545FC] .veth_pool_store+0xd0/0x260 [ibmveth] [C00000001CD27C40] [C00000000012E0E8] .sysfs_write_file+0x118/0x198 [C00000001CD27CF0] [C0000000000CDAF0] .vfs_write+0x130/0x218 [C00000001CD27D90] [C0000000000CE52C] .sys_write+0x4c/0x8c [C00000001CD27E30] [C00000000000871C] syscall_exit+0x0/0x40 Instruction dump: 419affd8 2fa30000 419e0020 e93d0000 e89e8040 38a00255 e87e81b0 80c90018 48001531 e8410028 e93d00e0 7fa3eb78 <e8090ff8> f81d0430 4bfffdc9 38210090 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: OHCI: Fix machine check in ohci_hub_status_data USB: Fix up bogus bInterval values in endpoint descriptors USB: cxacru: ignore error trying to start ADSL in atm_start USB: cxacru: create sysfs attributes in atm_start instead of bind USB: cxacru: add Documentation file USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu USB: usb gadgets avoid le{16,32}_to_cpup() usblp: Don't let suspend to kill ->used USB: set default y for CONFIG_USB_DEVICE_CLASS
2007-06-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: firmware: remove orphaned Email kobject: use the proper printk level for kobject error Driver core: kill unused code Driver core: keep PHYSDEV for old struct class_device update Documentation/driver-model/platform.txt
2007-06-08sata_promise: use TF interface for polling NODATA commandsTejun Heo
sata_promise uses two different command modes - packet and TF. Packet mode is intelligent low-overhead mode while TF is the same old taskfile interface. As with other advanced interface (ahci/sil24), ATA_TFLAG_POLLING has no effect in packet mode. However, PIO commands are issued using TF interface in polling mode, so pdc_interrupt() considers interrupts spurious if ATA_TFLAG_POLLING is set. This is broken for polling NODATA commands because command is issued using packet mode but the interrupt handler ignores it due to ATA_TFLAG_POLLING. Fix pdc_qc_issue_prot() such that ATA/ATAPI NODATA commands are issued using TF interface if ATA_TFLAG_POLLING is set. This patch fixes detection failure introduced by polling SETXFERMODE. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08isdn/diva: fix section mismatchRandy Dunlap
__exit function is used by both init and exit routines, so it cannot be marked __init. (from allyesconfig) WARNING: drivers/built-in.o(.text+0x9b83cf): Section mismatch: reference to .exit.text: (between 'divasfunc_exit' and 'didd_callback') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Karsten Keil <kkeil@suse.de> Acked-by: Armin Schindler <armin@melware.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08Char: stallion, proper fail return valuesJiri Slaby
do not return 0 in one case and return proper values in other 2. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08Char: stallion, alloc tty before pci devices initJiri Slaby
this causes oops, because pci probe function calls tty_register_device for each device found. Thanks to Ingo. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: "Ingo Korb" <ingo@akana.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08Char: stallion, don't fail with less than max panelsJiri Slaby
Since it's not neccesary to have MAX_PANELS on the card, don't fail to let users use this card even in this case. Stop the testing for loop instead. Thanks to Ingo. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: "Ingo Korb" <ingo@akana.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08potential parse error in ifdef part 3Yoann Padioleau
Fix various bits of obviously-busted code which we're not happening to compile, due to ifdefs. Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08loop: preallocate eight loop devicesKen Chen
The kernel on-demand loop device instantiation breaks several user space tools as the tools are not ready to cope with the "on-demand feature". Fix it by instantiate default 8 loop devices and also reinstate max_loop module parameter. Signed-off-by: Ken Chen <kenchen@google.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08OHCI: Fix machine check in ohci_hub_status_dataAlan Stern
This patch (as901) fixes an oversight in ohci-hcd. The hub_status_data routine must not try to access the controller's memory-mapped registers if the controller is in a low-power state; such attempts will cause a crash on some architectures (such as PPC). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: Fix up bogus bInterval values in endpoint descriptorsAlan Stern
This patch (as904) adds code to check for endpoint descriptor bInterval values outside the legal limits. Illegal values are set to 32 ms, which seems like a reasonable default. This fixes Bugzilla #8432. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: ignore error trying to start ADSL in atm_startSimon Arlott
The sysfs adsl_status attribute ignores (aside from returning -EIO to the user) any error sending a START/STOP command to the device and there is at least one firmware which never sends a response but appears to work regardless. Therefore atm_start should also continue if an error is received so that such firmware is usable. The official Conexant driver doesn't expect a reply either but this is for another device (E2 router) and a commonly used firmware does respond. Also, there is no point in changing -ECONNRESET to -ETIMEDOUT since nothing ever checks for either of these values. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: cxacru: create sysfs attributes in atm_start instead of bindSimon Arlott
Since usbatm doesn't set the usb_interface driver data until after calling bind and heavy_init, it would be NULL when the sysfs attributes are read. Reading the MAC address from atm_dev before atm_dev exists would have been be possible too. Calling create_device_file in atm_start will avoid this problem, and the data is useless until the first status poll runs. However, it must be ready before a status poll does a printk on line status change otherwise userspace could react before the files exist. For completeness I've moved remove_device_file to atm_stop so it's not called in unbind when it's not needed. There's no point starting ADSL if atm_start could still fail either. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: UNUSUAL_DEV: Sync up some reported devices from UbuntuBen Collins
UNUSUAL_DEV: Sync up some reported devices from Ubuntu Various unusual dev entries accumulated from Ubuntu bug reports. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com>
2007-06-08USB: usb gadgets avoid le{16,32}_to_cpup()David Brownell
It turns out that le16_to_cpup() and le32_to_cpup() aren't always safe to call with pointers into packed structures, since those are inlined functions and GCC may lose the "packed" attribute. So those references can become unaligned kernel accesses, which are evil on some hardware. This patch updates uses of those routines in the gadget stack. The references into packed structures can just use leXX_to_cpu(*x), which in most cases is more natural. Some other uses in RNDIS, mostly in debug code, were wrong in the first place; those use get_unaligned(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08usblp: Don't let suspend to kill ->usedPete Zaitcev
Suspend destroys refcounting for open/release. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08USB: set default y for CONFIG_USB_DEVICE_CLASSKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: bert hubert <bert.hubert@netherlabs.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08firmware: remove orphaned EmailMarkus Rechberger
Manuel Estrada Sainz passed away on May 9th 2004, his email account got deactivated. He was in charge of the firmware_class code, and still got CC'ed in recent discussions about it. Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08Driver core: kill unused codeStephen Hemminger
CC drivers/base/dd.o drivers/base/dd.c:211: warning: =E2=80=98device_probe_drivers=E2=80=99 defi= ned but not used Looks like the following is dead. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08Driver core: keep PHYSDEV for old struct class_deviceKay Sievers
Class-devices created by "struct class_device" are going to be replaced by "struct device". Keep the deprecated PHYSDEV* variables for the already "deprecated" struct class_device" devices. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-07Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) xfrm: Add security check before flushing SAD/SPD [NET_SCHED]: Fix filter double free [NET]: Avoid duplicate netlink notification when changing link state [UDP]: Revert 2-pass hashing changes. [AF_UNIX]: Fix stream recvmsg() race. [NETFILTER]: nf_conntrack_amanda: fix textsearch_prepare() error check [NETFILTER]: ip_tables: fix compat related crash [NETFILTER]: nf_conntrack: fix helper module unload races [RTNETLINK]: ifindex 0 does not exist [NETLINK]: Mark netlink policies const [TCP] tcp_probe: Attach printf attribute properly to printl(). [TCP]: Use LIMIT_NETDEBUG in tcp_retransmit_timer(). [NET]: Merge dst_discard_in and dst_discard_out. [RFKILL]: Make rfkill->name const [IPV4]: Restore old behaviour of default config values [IPV4]: Add default config support after inetdev_init [IPV4]: Convert IPv4 devconf to an array [IPV4]: Only panic if inetdev_init fails for loopback [TCP]: Honour sk_bound_dev_if in tcp_v4_send_ack [BNX2]: Update version and reldate. ...
2007-06-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: fix pxa27x keyboard driver [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking [ARM] 4421/1: AT91: Value of _KEY fields. [ARM] Solve buggy smp_processor_id() usage [ARM] 4422/1: Fix default value handling in gpio_direction_output (PXA) [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending [ARM] 4418/1: AT91: Number of programmable clocks differs [ARM] 4392/2: Do not corrupt the SP register in compressed/head.S
2007-06-07[IPV4]: Convert IPv4 devconf to an arrayHerbert Xu
This patch converts the ipv4_devconf config members (everything except sysctl) to an array. This allows easier manipulation which will be needed later on to provide better management of default config values. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Update version and reldate.Michael Chan
Update to version 1.5.11. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Fix occasional counter corruption on 5708.Michael Chan
The statistics block DMA on 5708 can be messed up occasionally on the average of about once per hour. If the user is reading the counters within one second after the corruption, the counters will be all messed up. One second later, the counters will be ok again until the next corruption occurs. The workaround is to disable the periodic statistics DMA. Instead, we manually trigger the DMA once a second in bnx2_timer(). This manual trigger of the DMA avoids the problem. As a consequence, we can only allow 0 or 1 second settings for ethtool -C statistics block. Thanks to Jean-Daniel Pauget <jd@disjunkt.com> and CaT <cat@zip.com.au> for reporting this rare problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Enable DMA on 5709.Michael Chan
Add missing code to enable DMA on 5709 A1. The bit is a no-op on A0 and therefore can be set on all 5709 chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Add missing wait in bnx2_init_5709_context().Michael Chan
For correctness, we need to wait for the MEM_INIT bit to be cleared in the BNX2_CTX_COMMAND register before proceeding. [Added return -EBUSY when the MEM_INIT bit doesn't clear, suggested by Jeff Garzik.] Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[BNX2]: Fix netdev watchdog on 5708.Michael Chan
There's a bug in the driver that only initializes half of the context memory on the 5708. Surprisingly, this works most of the time except for some occasional netdev watchdogs when sending a lot of 64-byte packets. The fix is to add the missing code to initialize the 2nd halves of all context memory. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-05[VIDEO] sunxvr500fb: Fix pseudo_palette array sizeAntonino Daplas
- the pseudo_palette is only 16 elements long. - the pseudo_palette has only 16 elements. Do not write if regno (the array index) is more than 15. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-05[VIDEO] sunxvr2500fb: Fix pseudo_palette array sizeAntonino Daplas
- the pseudo_palette is only 16 elements long. - the pseudo_palette has only 16 elements. Do not write if regno (the array index) is more than 15. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-05[ARM] pxa: fix pxa27x keyboard driverRussell King
CKEN macro definitions no longer contains the bit number; remove it from usages in the pxa27x keyboard driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-05[VIDEO] ffb: The pseudo_palette is only 16 elements longAntonino Daplas
The pseudo_palette is only 16 elements long. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-05[ARM] Fix 4417/1: Serial: Fix AMBA drivers lockingRussell King
2389b272168ceec056ca1d8a870a97fa9c26e11a contains a merge bug; fix it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-04[VIDEO]: Fix section mismatch warning in promcon.Sam Ravnborg
Fix the following warnings in promcon: WARNING: o-sparc64/drivers/video/console/built-in.o(.text+0x480): Section mismatch: reference to .init.data:promfont_unitable (between 'promcon_init_unimap' and 'promcon_init') WARNING: o-sparc64/drivers/video/console/built-in.o(.text+0x488): Section mismatch: reference to .init.data:promfont_unitable (between 'promcon_init_unimap' and 'promcon_init') WARNING: o-sparc64/drivers/video/console/built-in.o(.text+0x48c): Section mismatch: reference to .init.data:promfont_unicount (between 'promcon_init_unimap' and 'promcon_init') WARNING: o-sparc64/drivers/video/console/built-in.o(.text+0x490): Section mismatch: reference to .init.data:promfont_unicount (between 'promcon_init_unimap' and 'promcon_init') The warnings happens because the function: promcon_init_unimap() references promfont_unitable and promfont_unicount which are marked __initdata by the conmakehash command in the drivers/video/console/Makefile Fix the warning by removing the __initdata marker on the two variables. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04[ATA]: Back out bogus (SPARC64 && !PCI) Kconfig depends.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2] Fix obsoletion of metadata nodes in jffs2_add_tn_to_tree() [MTD] Fix error checking after get_mtd_device() in get_sb_mtd functions [JFFS2] Fix buffer length calculations in jffs2_get_inode_nodes() [JFFS2] Fix potential memory leak of dead xattrs on unmount. [JFFS2] Fix BUG() caused by failing to discard xattrs on deleted files. [MTD] generalise the handling of MTD-specific superblocks [MTD] [MAPS] don't force uclinux mtd map to be root dev
2007-06-04libata: always use polling SETXFERTejun Heo
Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] JAZZ ESP and SUN ESP need SPI_ATTRS [SCSI] atari_NCR5380: update_timeout removal [SCSI] aacraid: fix shutdown handler to also disable interrupts. [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout [SCSI] fix CONFIG_SCSI_WAIT_SCAN=m
2007-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 16:21:13 +0000