summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-22PCI hotplug: pciehp: poll data link layer link activeKenji Kaneshige
This patch adds polling mechanism for Data Link Layer Link Active bit after turning power on, instead of waiting for 1000 msec. This reduces reduce the unnecessary long wait. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI hotplug: pciehp: fix possible memory leak in pcie_initKenji Kaneshige
Fix the error paths in pcie_init to avoid leaking memory. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Workaround invalid P2P bridge bus numbersBenjamin Herrenschmidt
Some firmware fail to properly configure P2P bridges, leaving them with invalid bus numbers. In some cases, this happens on some embedded 4xx boards as the result of the kernel allocating different bus space than the firmware does to host bridges while not setting pcibios_assign_all_busses() for various reasons. In other cases, it can just be bogus firmware. This adds some sanity checking to the PCI probing code. If a bridge is found whose primary bus number doesn't match the bus it's sitting on, or whose secondary bus number not strictly above it's primary bus number, then the bridge bus numbers are deconfigured in the first pass of pci_scan_bridge() to be re-assigned in the second pass. Tested-by: "Ayman El-Khashab" <AymanE@tanisys.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: fakephp: add duplicate slot name debuggingAlex Chiang
The PCI core now manages slot names on behalf of slot detection and slot hotplug drivers, including the handling of duplicate slot names. We can use the fakephp driver to help test the new functionality. Add a 'dup_slots' module param to force fakephp to create multiple slots with the same name. We can then verify that the PCI core correctly renamed the slots. sapphire:/sys/bus/pci/slots # modprobe fakephp dup_slots sapphire:/sys/bus/pci/slots # ls fake fake-10 fake-3 fake-5 fake-7 fake-9 fake-1 fake-2 fake-4 fake-6 fake-8 Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Hotplug core: remove 'name'Alex Chiang
Now that the PCI core manages the 'name' for each individual hotplug driver, and all drivers (except rpaphp) have been converted to use hotplug_slot_name(), there is no need for the PCI hotplug core to drag around its own copy of name either. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: shcphp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from shpchp's version of struct slot. This change also removes the unused struct task_event from the slot structure. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: SGI Hotplug: stop managing bss_hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Update the sn_hp_slot_private_alloc() interface to fill in the correct name for us, as that function already has all the parameters needed to determine the name. Cc: kristen.c.accardi@intel.com Cc: jpk@sgi.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: rpaphp: kmalloc/kfree slot->name directlyAlex Chiang
rpaphp tends to use slot->name directly everywhere, and doesn't ever need slot->hotplug_slot->name. struct hotplug_slot->name is going away, so convert rpaphp directly manipulate its own slot->name everywhere, and don't bother touching slot->hotplug_slot->name. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: pciehp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from pciehp's version of struct slot, and remove unused 'task_list' as well. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: ibmphp: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Additionally, slightly rearrange the members of struct slot so they are naturally aligned to eliminate holes. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: fakephp: remove 'name' parameterAlex Chiang
Remove 'name' from fakephp's struct dummy_slot, as the PCI core will now manage our slot name for us. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI, PCI Hotplug: introduce slot_name helpersAlex Chiang
In preparation for cleaning up the various hotplug drivers such that they don't have to manage their own 'name' parameters anymore, we provide the following convenience functions: pci_slot_name() hotplug_slot_name() These helpers will be used by individual hotplug drivers. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpqphp: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpci_hotplug: stop managing hotplug_slot->nameAlex Chiang
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: kristen.c.accardi@intel.com Cc: scottm@somanetworks.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: acpiphp: remove 'name' parameterAlex Chiang
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from acpiphp's version of struct slot. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: prevent duplicate slot namesAlex Chiang
Prevent callers of pci_create_slot() from registering slots with duplicate names. This condition occurs most often when PCI hotplug drivers are loaded on platforms with broken firmware that assigns identical names to multiple slots. We now rename these duplicate slots on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 etc. This is the permanent fix mentioned in earlier commits d6a9e9b4 and 167e782e (shpchp/pciehp: Rename duplicate slot name...). We take advantage of the new 'hotplug' parameter in pci_create_slot() to prevent a slot create/rename race between hotplug drivers and detection drivers. Scenario A: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=NULL) The hotplug driver creates the slot with its desired name, and then releases the semaphore. Now, the detection driver tries to create the same slot, but it already exists. We don't care about renaming, so return the existing slot. Scenario B: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=NULL) pci_create_slot(hotplug=set) The detection driver creates the slot with name "X". Then the hotplug driver tries to create the same slot, but wants the name "Y" instead. We detect that we're trying to create the same slot and that we also want a rename, so rename the slot to "Y" and return. Scenario C: hotplug driver hotplug driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=set) Two separate hotplug drivers are attempting to claim the slot and are passing valid hotplug_slot args to pci_create_slot(). We detect that the slot already has a ->hotplug callback, prevent a rename, and return -EBUSY. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: serialize pci_hp_register and pci_hp_deregisterKenji Kaneshige
Convert the pci_hotplug_slot_list_lock, which only protected the list of hotplug slots, to a pci_hp_mutex which now protects both interfaces. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: update pci_create_slot() to take a 'hotplug' paramAlex Chiang
Slot detection drivers can co-exist with hotplug drivers. The names of the detected/claimed slots may be different depending on module load order. For legacy reasons, we need to allow hotplug drivers to override the slot name if a detection driver is loaded first (and they find the same slots). Creating and overriding slot names should be an atomic operation, otherwise you get a locking nightmare as various drivers race to call pci_create_slot(). pci_create_slot() is already serialized by grabbing the pci_bus_sem. We update the API and add a 'hotplug' param, which is: set if the caller is a hotplug driver NULL if the caller is a detection driver pci_create_slot() does not actually use the 'hotplug' parameter in this patch. A later patch will add the logic that uses it. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: rename pci_update_slot_number to pci_renumber_slotAlex Chiang
The GPL exported symbol pci_update_slot_number has been renamed to pci_renumber_slot. Some of the safety checks were unnecessary and were removed. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug core: add 'name' param pci_hp_register interfaceAlex Chiang
Update pci_hp_register() to take a const char *name parameter. The motivation for this is to clean up the individual hotplug drivers so that each one does not have to manage its own name. The PCI core should be the place where we manage the name. We update the interface and all callsites first, in a "no functional change" manner, and clean up the drivers later. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: add support for function level resetSheng Yang
Sometimes, it's necessary to enable software's ability to quiesce and reset endpoint hardware with function-level granularity, so provide support for it. The patch implement Function Level Reset(FLR) feature following PCI-e spec. And this is the first step. We would add more generic method, like D0/D3, to allow more devices support this function. The patch contains two functions. pcie_reset_function() is the new driver API, and, contains some action to quiesce a device. The other function is a helper: pcie_execute_reset_function() just executes the reset for a particular device function. Current the usage model is in KVM. Function reset is necessary for assigning device to a guest, or moving it between partitions. For Function Level Reset(FLR), please refer to PCI Express spec chapter 6.6.2. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Fix reference counting bugMatthew Wilcox
pci_get_subsys() will decrement the reference count of the device that it starts searching from. Unfortunately, the pci_find_device() interface will already have decremented the reference count of the device earlier, so the device will end up losing all reference counts and be freed. We can fix this by incrementing the reference count of the device to start searching from before calling pci_get_subsys(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Set support bit for MSI in support field of _OSCTaku Izumi
Currently linux doesn't have any code to set the "MSI supported" bit in Support Fireld of _OSC. This patch adds the code for that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Fix return value of acpi_cuery_osc()Taku Izumi
If acpi_query_osc() returns other than AE_OK, __pci_osc_support_set() stops scanning ACPI objects to evaluate _OSC. This prevents subsequent _OSCs from being evaluated if some of root bridge doesn't have _OSC, for example. So acpi_query_osc() should return always AE_OK to evaluate all _OSC. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Always query _OSC control field in pci_osc_control_set()Taku Izumi
In current pci_osc_control_set() implementation, once the _OSC control field is queried, it is never queried again. But the query result can change depending on the _OSC support field. For example, if PCI Express Native Hot Plug control depends on ASPM support on a certain platform, a PCI Express Native Hot Plug Control query would fail before the ASPM driver was loaded, but it would succeed if the ASPM driver was loaded first. Therefore, pci_osc_control_set() should query the _OSC control field every time. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Change pci_osc_control_set() to query control bits firstTaku Izumi
Current pci_osc_control_set() evaluates _OSC without query for control bits, unless __pci_osc_support_set() is called beforehand. But as strongly recommended in PCI firmware specification, it should query control bits first. This patch changes pci_osc_control_set() to query control bits first even if __pci_osc_support_set() is not called beforehand. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Fix possible race condition on _OSC evaluationTaku Izumi
Fix possible race condition on _OSC evaluation. Current _OSC evaluation code has possible race condition because it maniputes osc_data linked list or its contents without any lock mechanism. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20Export tiny shmem_file_setup for DRM-GEMHugh Dickins
We're trying to keep the !CONFIG_SHMEM tiny-shmem.c (using ramfs without swap) in synch with CONFIG_SHMEM shmem.c (and mpm is preparing patches to combine them). I was glad to see EXPORT_SYMBOL_GPL(shmem_file_setup) go into shmem.c, but why not support DRM-GEM when !CONFIG_SHMEM too? But caution says still depend on MMU, since !CONFIG_MMU is.. different. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Matt Mackall <mpm@selenic.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20misc: replace remaining __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20fix CONFIG_HIGHMEM compile error in drivers/gpu/drm/i915/i915_gem.cThomas Gleixner
commit 9b7530cc329eb036cfa589930c270e85031f554c ("i915: cleanup coding horrors in i915_gem_gtt_pwrite()") broke the i386 build for CONFIG_HIGHMEM=y. Caught by automatic testing http://www.tglx.de/autoqa-logs/000137-0006-0001.log Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ My bad. It's the same patch I sent out earlier, nobody noticed then either.. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: convert to generic compat_sys_ptrace parisc: add rtc platform driver parisc: initialize unwinder much earlier parisc: add new syscalls parisc: hijack jump to start_kernel parisc: add pdc_coproc_cfg_unlocked and set_firmware_width_unlocked parisc: move include/asm-parisc to arch/parisc/include/asm parisc: move pdc_result to real2.S parisc: unify CCIO_COLLECT_STATS implementation parisc: add arch/parisc/kernel/.gitignore parisc: ropes.h - fix <asm-parisc/*> -> <asm/*> parisc: parisc-agp - fix <asm-parisc/*> -> <asm/*> Resolve remove/rename conflict: include/asm-parisc/a.out.h is no longer relevant.
2008-10-20USB: Fix unused label warnings in drivers/usb/host/ehci-hcd.cLinus Torvalds
This gets rid of an annoying warning in ehci-hcd.c when DEBUG isn't enabled: warning: label 'err_debug' defined but not used by moving it inside the already-existing #ifdef DEBUG, so that it matches the goto. And now my regular build is warning-free again. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20i915: cleanup coding horrors in i915_gem_gtt_pwrite()Linus Torvalds
Yes, this will probably be switched over to a cleaner model anyway, but in the meantime I don't want to see the 'unused variable' warnings that come from the disgusting #ifdef code. Make the special case be a nice inlien function of its own, clean up the code, and make the warning go away. I wish people didn't write code that gets (valid) warnings from the compiler, but I'll limit my fixes to code that I actually care about (in this case just because I see the warning and it annoys me). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Fix sprintf format warnings in drm_proc.cLinus Torvalds
Use "%zd" for size_t, and make sure to have a space between the numbers instead of depending on the field width. I don't like warnings in my default targeted build. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: UIO: BKL removal
2008-10-20Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (41 commits) PCI: fix pci_ioremap_bar() on s390 PCI: fix AER capability check PCI: use pci_find_ext_capability everywhere PCI: remove #ifdef DEBUG around dev_dbg call PCI hotplug: fix get_##name return value problem PCI: document the pcie_aspm kernel parameter PCI: introduce an pci_ioremap(pdev, barnr) function powerpc/PCI: Add legacy PCI access via sysfs PCI: Add ability to mmap legacy_io on some platforms PCI: probing debug message uniformization PCI: support PCIe ARI capability PCI: centralize the capabilities code in probe.c PCI: centralize the capabilities code in pci-sysfs.c PCI: fix 64-vbit prefetchable memory resource BARs PCI: replace cfg space size (256/4096) by macros. PCI: use resource_size() everywhere. PCI: use same arg names in PCI_VDEVICE comment PCI hotplug: rpaphp: make debug var unique PCI: use %pF instead of print_fn_descriptor_symbol() in quirks.c PCI: fix hotplug get_##name return value problem ...
2008-10-20Merge branch 'genirq-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip This merges branches irq/genirq, irq/sparseirq-v4, timers/hpet-percpu and x86/uv. The sparseirq branch is just preliminary groundwork: no sparse IRQs are actually implemented by this tree anymore - just the new APIs are added while keeping the old way intact as well (the new APIs map 1:1 to irq_desc[]). The 'real' sparse IRQ support will then be a relatively small patch ontop of this - with a v2.6.29 merge target. * 'genirq-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (178 commits) genirq: improve include files intr_remapping: fix typo io_apic: make irq_mis_count available on 64-bit too genirq: fix name space collisions of nr_irqs in arch/* genirq: fix name space collision of nr_irqs in autoprobe.c genirq: use iterators for irq_desc loops proc: fixup irq iterator genirq: add reverse iterator for irq_desc x86: move ack_bad_irq() to irq.c x86: unify show_interrupts() and proc helpers x86: cleanup show_interrupts genirq: cleanup the sparseirq modifications genirq: remove artifacts from sparseirq removal genirq: revert dynarray genirq: remove irq_to_desc_alloc genirq: remove sparse irq code genirq: use inline function for irq_to_desc genirq: consolidate nr_irqs and for_each_irq_desc() x86: remove sparse irq from Kconfig genirq: define nr_irqs for architectures with GENERIC_HARDIRQS=n ...
2008-10-20Merge branch 'v28-timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits) fix documentation of sysrq-q really Fix documentation of sysrq-q timer_list: add base address to clock base timer_list: print cpu number of clockevents device timer_list: print real timer address NOHZ: restart tick device from irq_enter() NOHZ: split tick_nohz_restart_sched_tick() NOHZ: unify the nohz function calls in irq_enter() timers: fix itimer/many thread hang, fix timers: fix itimer/many thread hang, v3 ntp: improve adjtimex frequency rounding timekeeping: fix rounding problem during clock update ntp: let update_persistent_clock() sleep hrtimer: reorder struct hrtimer to save 8 bytes on 64bit builds posix-timers: lock_timer: make it readable posix-timers: lock_timer: kill the bogus ->it_id check posix-timers: kill ->it_sigev_signo and ->it_sigev_value posix-timers: sys_timer_create: cleanup the error handling posix-timers: move the initialization of timer->sigq from send to create path posix-timers: sys_timer_create: simplify and s/tasklist/rcu/ ... Fix trivial conflicts due to sysrq-q description clahes in Documentation/sysrq.txt and drivers/char/sysrq.c
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits) ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup scc_pata: kill unused variables sgiioc4: kill duplicate ioremap() sgiioc4: kill useless address checks delkin_cb: add PM support ide: remove broken hpt34x driver ide-floppy: remove idefloppy_floppy_t typedef sgiioc4: remove maskproc() method hpt366: cleanup maskproc() method ide: mask interrupt in ide_config_drive_speed() hpt366: fix compile warning ide: remove unused macros from <asm-parisc/ide.h> ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h> ide: remove dead <asm-arm/arch-sa1100/ide.h> ide: fix support for IDE PCI controllers using MMIO on frv ide-cd: remove stale comment ide-cd: small drive type print fix ide-cd: debug log enhancements ide: add generic ATA/ATAPI disk driver ide: allow device drivers to specify per-device type /proc settings ...
2008-10-20Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: fsldma: allow Freescale Elo DMA driver to be compiled as a module fsldma: remove internal self-test from Freescale Elo DMA driver drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL dmatest: properly handle duplicate DMA channels drivers/dma/ioat_dma.c: drop code after return async_tx: make async_tx_run_dependencies() easier to read
2008-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] ib700wdt.c - fix buffer_underflow bug
2008-10-20Update email addresses.Dave Jones
Update assorted email addresses and related info to point to a single current, valid address. additionally - trivial CREDITS entry updates. (Not that this file means much any more) - remove arjans dead redhat.com address from powernow driver Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20Remove empty imacfb.c fileLinus Torvalds
Commit 7c08c9ae0c145807c0dae4a55f240fa3d4fd5262 ("efifb/imacfb consolidation + hardware support") claimed to remove imacfb entirely and merge its DMI table into the efifb driver. So far so good, but the diff actually ended up just generating an empty file instead of removing it. [ Technical reason: the patch header looked like diff -puN drivers/video/imacfb.c~efifb-imacfb-consolidation-hardware-support drivers/video/imacfb.c --- a/drivers/video/imacfb.c~efifb-imacfb-consolidation-hardware-support +++ a/drivers/video/imacfb.c @@ -1,376 +0,0 @@ which git will think is a truncation, not a delete. Git wants to see a target of /dev/null to consider it a delete. ] So remove it properly. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20PCI: fix AER capability checkYu Zhao
The 'use pci_find_ext_capability everywhere' cleanup brought a new bug, which makes the AER stop working. Fix it by actually using find_ext_cap instead of just find_cap. Drop the unused config space size define while we're at it. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: use pci_find_ext_capability everywhereJesse Barnes
Remove some open coded (and buggy) versions of pci_find_ext_capability in favor of the real routine in the PCI core. Tested-by: Tomasz Czernecki <czernecki@gmail.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: remove #ifdef DEBUG around dev_dbg callJesse Barnes
No longer needed since we don't use the function symbol stuff anymore. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI hotplug: fix get_##name return value problemKenji Kaneshige
The commit 356a9d6f3dd283f83861adf1ac909879f0e66411 (PCI: fix hotplug get_##name return value problem) doesn't seem to be merged properly. Because of this, PCI hotplug no longer works (Read/Write PCI hotplug files always returns -ENODEV). This patch fixes wrong check of try_module_get() return value check in get_##name(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: Add ability to mmap legacy_io on some platformsBenjamin Herrenschmidt
This adds the ability to mmap legacy IO space to the legacy_io files in sysfs on platforms that support it. This will allow to clean up X to use this instead of /dev/mem for legacy IO accesses such as those performed by Int10. While at it I moved pci_create/remove_legacy_files() to pci-sysfs.c where I think they belong, thus making more things statis in there and cleaned up some spurrious prototypes in the ia64 pci.h file Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: probing debug message uniformizationVincent Legoll
This patch uniformizes PCI probing debug boot messages with dev_printk() intead of manual printk() It changes adress range output from [%llx, %llx] to [%#llx-%#llx], like in pci_request_region(). For example, it goes from the mixed-style: PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4280000, f4283fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold to uniform: pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4280000-0xf4283fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold This patch has been runtime tested, boot log messages diffed, everything looks OK. Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: support PCIe ARI capabilityYu Zhao
This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>