| Age | Commit message (Collapse) | Author |
|---|
|
When it goes to error through line 144, the memory allocated to *devname is
not freed, and the caller doesn't free it either in line 250. So we free the
memroy of *devname in function cifs_compose_mount_options() when it goes to
error.
Signed-off-by: Cong Ding <dinggnu@gmail.com>
CC: stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
srcip_matches() previously had code like this:
srcip_matches(..., struct sockaddr *rhs) {
/* ... */
struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs;
return ipv6_addr_equal(..., &vaddr6->sin6_addr);
}
which interpreted the values on the stack after the 'rhs' pointer as an
ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'.
Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
If we have mandatory byte-range locks on a file we can't cache reads
because pagereading may have conflicts with these locks on the server.
That's why we should allow level2 oplocks for files without mandatory
locks only.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by writing directly to the server and then breaking oplock level from
level2 to None.
Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
that solution has data races and can end up two identical writes to the
server: when clientCanCacheAll value can be changed during the execution
of __generic_file_aio_write.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
When a call goes out, the signing code adjusts the sequence number
upward by two to account for the request and the response. An NT_CANCEL
however doesn't get a response of its own, it just hurries the server
along to get it to respond to the original request more quickly.
Therefore, we must adjust the sequence number back down by one after
signing a NT_CANCEL request.
Cc: <stable@vger.kernel.org>
Reported-by: Tim Perry <tdparmor-sambabugs@yahoo.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Cai reported this oops:
[90701.616664] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[90701.625438] IP: [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.632167] PGD fea319067 PUD 103fda4067 PMD 0
[90701.637255] Oops: 0000 [#1] SMP
[90701.640878] Modules linked in: des_generic md4 nls_utf8 cifs dns_resolver binfmt_misc tun sg igb iTCO_wdt iTCO_vendor_support lpc_ich pcspkr i2c_i801 i2c_core i7core_edac edac_core ioatdma dca mfd_core coretemp kvm_intel kvm crc32c_intel microcode sr_mod cdrom ata_generic sd_mod pata_acpi crc_t10dif ata_piix libata megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[90701.677655] CPU 10
[90701.679808] Pid: 9627, comm: ls Tainted: G W 3.7.1+ #10 QCI QSSC-S4R/QSSC-S4R
[90701.688950] RIP: 0010:[<ffffffff814a343e>] [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.698383] RSP: 0018:ffff88177b431bb8 EFLAGS: 00010206
[90701.704309] RAX: ffff88177b431fd8 RBX: 00007ffffffff000 RCX: ffff88177b431bec
[90701.712271] RDX: 0000000000000003 RSI: 0000000000000006 RDI: 0000000000000000
[90701.720223] RBP: ffff88177b431bc8 R08: 0000000000000004 R09: 0000000000000000
[90701.728185] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
[90701.736147] R13: ffff88184ef92000 R14: 0000000000000023 R15: ffff88177b431c88
[90701.744109] FS: 00007fd56a1a47c0(0000) GS:ffff88105fc40000(0000) knlGS:0000000000000000
[90701.753137] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[90701.759550] CR2: 0000000000000028 CR3: 000000104f15f000 CR4: 00000000000007e0
[90701.767512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[90701.775465] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[90701.783428] Process ls (pid: 9627, threadinfo ffff88177b430000, task ffff88185ca4cb60)
[90701.792261] Stack:
[90701.794505] 0000000000000023 ffff88177b431c50 ffff88177b431c38 ffffffffa014fcb1
[90701.802809] ffff88184ef921bc 0000000000000000 00000001ffffffff ffff88184ef921c0
[90701.811123] ffff88177b431c08 ffffffff815ca3d9 ffff88177b431c18 ffff880857758000
[90701.819433] Call Trace:
[90701.822183] [<ffffffffa014fcb1>] smb_send_rqst+0x71/0x1f0 [cifs]
[90701.828991] [<ffffffff815ca3d9>] ? schedule+0x29/0x70
[90701.834736] [<ffffffffa014fe6d>] smb_sendv+0x3d/0x40 [cifs]
[90701.841062] [<ffffffffa014fe96>] smb_send+0x26/0x30 [cifs]
[90701.847291] [<ffffffffa015801f>] send_nt_cancel+0x6f/0xd0 [cifs]
[90701.854102] [<ffffffffa015075e>] SendReceive+0x18e/0x360 [cifs]
[90701.860814] [<ffffffffa0134a78>] CIFSFindFirst+0x1a8/0x3f0 [cifs]
[90701.867724] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs]
[90701.875601] [<ffffffffa013f731>] ? build_path_from_dentry+0xf1/0x260 [cifs]
[90701.883477] [<ffffffffa01578e6>] cifs_query_dir_first+0x26/0x30 [cifs]
[90701.890869] [<ffffffffa015480d>] initiate_cifs_search+0xed/0x250 [cifs]
[90701.898354] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.904486] [<ffffffffa01554cb>] cifs_readdir+0x45b/0x8f0 [cifs]
[90701.911288] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.917410] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.923533] [<ffffffff81195970>] ? fillonedir+0x100/0x100
[90701.929657] [<ffffffff81195848>] vfs_readdir+0xb8/0xe0
[90701.935490] [<ffffffff81195b9f>] sys_getdents+0x8f/0x110
[90701.941521] [<ffffffff815d3b99>] system_call_fastpath+0x16/0x1b
[90701.948222] Code: 66 90 55 65 48 8b 04 25 f0 c6 00 00 48 89 e5 53 48 83 ec 08 83 fe 01 48 8b 98 48 e0 ff ff 48 c7 80 48 e0 ff ff ff ff ff ff 74 22 <48> 8b 47 28 ff 50 68 65 48 8b 14 25 f0 c6 00 00 48 89 9a 48 e0
[90701.970313] RIP [<ffffffff814a343e>] kernel_setsockopt+0x2e/0x60
[90701.977125] RSP <ffff88177b431bb8>
[90701.981018] CR2: 0000000000000028
[90701.984809] ---[ end trace 24bd602971110a43 ]---
This is likely due to a race vs. a reconnection event.
The current code checks for a NULL socket in smb_send_kvec, but that's
too late. By the time that check is done, the socket will already have
been passed to kernel_setsockopt. Move the check into smb_send_rqst, so
that it's checked earlier.
In truth, this is a bit of a half-assed fix. The -ENOTSOCK error
return here looks like it could bubble back up to userspace. The locking
rules around the ssocket pointer are really unclear as well. There are
cases where the ssocket pointer is changed without holding the srv_mutex,
but I'm not clear whether there's a potential race here yet or not.
This code seems like it could benefit from some fundamental re-think of
how the socket handling should behave. Until then though, this patch
should at least fix the above oops in most cases.
Cc: <stable@vger.kernel.org> # 3.7+
Reported-and-Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
It's always set to "1" and there's no way to change it to anything else.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
numbers are in use
Oliver reported that commit cd60042c caused his cifs mounts to
continually thrash through new inodes on readdir. His servers are not
sending inode numbers (or he's not using them), and the new test in
that function doesn't account for that sort of setup correctly.
If we're not using server inode numbers, then assume that the inode
attached to the dentry hasn't changed. Go ahead and update the
attributes in place, but keep the same inode number.
Cc: <stable@vger.kernel.org> # v3.5+
Reported-and-Tested-by: Oliver Mössinger <Oliver.Moessinger@ichaus.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
Dan reported the following regression in commit d387a5c5:
+ fs/cifs/connect.c:1903 cifs_parse_mount_options() error: double free of 'string'
That patch has some of the new option parsing code free "string" without
setting the variable to NULL afterward. Since "string" is automatically
freed in an error condition, fix the code to just rely on that instead
of freeing it explicitly.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"A quiet cycle for the security subsystem with just a few maintenance
updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
Smack: create a sysfs mount point for smackfs
Smack: use select not depends in Kconfig
Yama: remove locking from delete path
Yama: add RCU to drop read locking
drivers/char/tpm: remove tasklet and cleanup
KEYS: Use keyring_alloc() to create special keyrings
KEYS: Reduce initial permissions on keys
KEYS: Make the session and process keyrings per-thread
seccomp: Make syscall skipping and nr changes more consistent
key: Fix resource leak
keys: Fix unreachable code
KEYS: Add payload preparsing opportunity prior to key instantiate or update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
|
|
If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by populating the page cache without marking affected pages dirty
after a successful write directly to the server.
Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
This should fix a regression that was introduced when the new mount
option parser went in. Also, when the unc= and prefixpath= options
are provided, check their values against the ones we parsed from
the device string. If they differ, then throw a warning that tells
the user that we're using the values from the unc= option for now,
but that that will change in 3.10.
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Currently the code takes care to ensure that the prefixpath has a
leading '/' delimiter. What if someone passes us a prefixpath with a
leading '\\' instead? The code doesn't properly handle that currently
AFAICS.
Let's just change the code to skip over any leading delimiter character
when copying the prepath. Then, fix up the users of the prepath option
to prefix it with the correct delimiter when they use it.
Also, there's no need to limit the length of the prefixpath to 1k. If
the server can handle it, why bother forbidding it?
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Make sure we free any existing memory allocated for vol->UNC, just in
case someone passes in multiple unc= options.
Get rid of the check for too long a UNC. The check for >300 bytes seems
arbitrary. We later copy this into the tcon->treeName, for instance and
it's a lot shorter than 300 bytes.
Eliminate an extra kmalloc and copy as well. Just set the vol->UNC
directly with the contents of match_strdup.
Establish that the UNC should be stored with '\\' delimiters. Use
convert_delimiter to change it in place in the vol->UNC.
Finally, move the check for a malformed UNC into
cifs_parse_mount_options so we can catch that situation earlier.
Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The authority fields are supposed to be represented by a single 48-bit
value. It's also supposed to represent the value as hex if it's equal to
or greater than 2^32. This is documented in MS-DTYP, section 2.4.2.1.
Also, fix up the max string length to account for this fix.
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
SMB2 and later will return only 1 credit for session setup (phase 1)
not just for the negotiate protocol response. Do not disable
echoes and oplocks on session setup (we only need one credit
for tree connection anyway) as a resonse with only 1 credit
on phase 1 of sessionsetup is expected.
Fixes the "CIFS VFS: disabling echoes and oplocks" message
logged to dmesg.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
|
|
Restructure code to make SMB2 vs. SMB3 signing a protocol
specific op. SMB3 signing (AES_CMAC) is not enabled yet,
but this restructuring at least makes sure we don't send
an smb2 signature on an smb3 signed connection. A followon
patch will add AES_CMAC and enable smb3 signing.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
|
|
A SID could potentially be embedded inside of payload.value if there are
no subauthorities, and the arch has 8 byte pointers. Allow for that
possibility there.
While we're at it, rephrase the "embedding" check in terms of
key->payload to allow for the possibility that the union might change
size in the future.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
It was hardcoded to 192 bytes, which was not enough when the max number
of subauthorities went to 15. Redefine this constant in terms of sizeof
the structs involved, and rename it for better clarity.
While we're at it, remove a couple more unused constants from cifsacl.h.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Now that we aren't so rigid about the length of the key being passed
in, we need to be a bit more rigorous about checking the length of
the actual data against the claimed length (a'la num_subauths field).
Check for the case where userspace sends us a seemingly valid key
with a num_subauths field that goes beyond the end of the array. If
that happens, return -EIO and invalidate the key.
Also change the other places where we check for malformed keys in this
code to invalidate the key as well.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The cifs.idmap keytype always allocates memory to hold the payload from
userspace. In the common case where we're translating a SID to a UID or
GID, we're allocating memory to hold something that's less than or equal
to the size of a pointer.
When the payload is the same size as a pointer or smaller, just store
it in the payload.value union member instead. That saves us an extra
allocation on the sid_to_id upcall.
Note that we have to take extra care to check the datalen when we
go to dereference the .data pointer in the union, but the callers
now check that as a matter of course anyway.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The cifs.idmap handling code currently causes the kernel to cache the
data from userspace twice. It first looks in a rbtree to see if there is
a matching entry for the given id. If there isn't then it calls
request_key which then checks its cache and then calls out to userland
if it doesn't have one. If the userland program establishes a mapping
and downcalls with that info, it then gets cached in the keyring and in
this rbtree.
Aside from the double memory usage and the performance penalty in doing
all of these extra copies, there are some nasty bugs in here too. The
code declares four rbtrees and spinlocks to protect them, but only seems
to use two of them. The upshot is that the same tree is used to hold
(eg) uid:sid and sid:uid mappings. The comparitors aren't equipped to
deal with that.
I think we'd be best off to remove a layer of caching in this code. If
this was originally done for performance reasons, then that really seems
like a premature optimization.
This patch does that -- it removes the rbtrees and the locks that
protect them and simply has the code do a request_key call on each call
into sid_to_id and id_to_sid. This greatly simplifies this code and
should roughly halve the memory utilization from using the idmapping
code.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
by using cifs_invalidate_mapping rather than invalidate_remote_inode
in cifs_oplock_break - this invalidates all inode pages and resets
fscache cookies.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
We don't need to permit a write to the area locked with a read lock
by any process including the process that issues the write.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The caller doesn't do anything with the dentry, so there's no point in
holding a reference to it on return. Also cifs_prime_dcache better
describes the actual purpose of the function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
This can reduce the size of the module by ~120KB which
could be useful for embedded systems.
$ size fs/cifs/built-in.o*
text data bss dec hex filename
388567 34459 100440 523466 7fcca fs/cifs/built-in.o.new
495970 34599 117904 648473 9e519 fs/cifs/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
Make the compilation work again when CIFS_DEBUG is not #define'd.
Add format and argument verification for the various macros when
CIFS_DEBUG is not #define'd.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
We were checking incorrectly if signatures were required to be sent,
so were always sending signatures after the initial session establishment.
For SMB3 mounts (vers=3.0) this was a problem because we were putting
SMB2 signatures in SMB3 requests which would cause access denied
on mount (the tree connection would fail).
This might also be worth considering for stable (for 3.7), as the
error message on mount (access denied) is confusing to users and
there is no workaround if the server is configured to only
support smb3.0. I am ok either way.
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
|
|
It uses an undefined KERN_EVENT and is itself unused.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Currently, the code relies on the callers to do that and they all do,
but this will ensure that it's always done.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
match_server
Now that the smb_vol contains the destination sockaddr, there's no need
to pass it in separately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Take advantage of accelerated strchr() on arches that support it.
Also, no caller ever passes in a NULL pointer. Get rid of the unneeded
NULL pointer check.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Otherwise, "ls -l" will simply show the ownership of the files as
the default mnt_uid/gid. This may make "ls -l" performance on large
directories super-suck in some cases, but that's the cost of cifsacl.
One possibility to make it suck less would be to somehow proactively
dispatch the ACL requests asynchronously from readdir codepath, but
that's non-trivial to implement.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The option to have a blank "pass=" already exists, and with
a password specified both "pass=%s" and "password=%s" are supported.
Also, both blank "user=" and "username=" are supported, making
"password=" the odd man out.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
This patch enables optional for original SMB2 (SMB2.02) dialect
by specifying vers=2.0 on mount.
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If we netogiate mandatory locking style, have a read lock and try
to set a write lock we end up with a write lock in vfs cache and
no lock in cifs lock cache - that's wrong. Fix it by returning
from cifs_setlk immediately if a error occurs during setting a lock.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
that reacquires byte-range locks when a file is reopened.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
because the is no difference here. This also adds support of prefixpath
mount option for SMB2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Error out with a clear error message if there is no unc= option. The
existing code doesn't handle this in a clear fashion, and the check for
a UNCip option with no UNC string is just plain wrong.
Later, we'll fix the code to not require a unc= option, but for now we
need this to at least clarify why people are getting errors about DFS
parsing. With this change we can also get rid of some later NULL pointer
checks since we know the UNC and UNCip will never be NULL there.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
If we're using cifsacl, then we don't want to override the uid/gid with
the current uid/gid, since that would prevent you from being able to
upcall for this info.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
...and make those symbols static in cifsacl.c. Nothing outside
of that file refers to them.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
The format specifiers are for signed values, but these are unsigned.
Given that '-' is a delimiter between fields, I don't think you'd get
what you'd expect if you got a value here that would overflow the sign
bit.
The version and authority fields are 8 bit values so use a "hh" length
modifier there. The subauths are 32 bit values, so there's no need to
use a "l" length modifier there.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
According to several places on the Internet and the samba winbind code,
this is hard limited to 15 in windows, not 5. This does balloon out
the allocation of each by 40 bytes, but I don't see any alternative.
Also, rename it to SID_MAX_SUB_AUTHORITIES to match the alleged name
of this constant in the windows header files
Finally, rename SIDLEN to SID_STRING_MAX, fix the value to reflect
the change to SID_MAX_SUB_AUTHORITIES and document how it was
determined.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
...and lift the restriction in id_to_sid upcall that the size must be
at least as big as a full cifs_sid.
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
