summaryrefslogtreecommitdiff
path: root/fs/namespace.c
AgeCommit message (Collapse)Author
2009-02-17Fix incomplete __mntput lockingAl Viro
Getting this wrong caused WARNING: at fs/namespace.c:636 mntput_no_expire+0xac/0xf2() due to optimistically checking cpu_writer->mnt outside the spinlock. Here's what we really want: * we know that nobody will set cpu_writer->mnt to mnt from now on * all changes to that sucker are done under cpu_writer->lock * we want the laziest equivalent of spin_lock(&cpu_writer->lock); if (likely(cpu_writer->mnt != mnt)) { spin_unlock(&cpu_writer->lock); continue; } /* do stuff */ that would make sure we won't miss earlier setting of ->mnt done by another CPU. Anyway, for now we just move the spin_lock() earlier and move the test into the properly locked region. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reported-and-tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14[CVE-2009-0029] System call wrappers part 14Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14[CVE-2009-0029] System call wrappers part 10Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-12-31fs/namespace.c: drop code after returnJulia Lawall
The extra semicolon serves no purpose. Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-11-14Merge branch 'master' into nextJames Morris
Conflicts: security/keys/internal.h security/keys/process_keys.c security/keys/request_key.c Fixed conflicts above by using the non 'tsk' versions. Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the filesystem subsystemDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-12vfs: fix shrink_submountsEric W. Biederman
In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23[RFC PATCH] touch_mnt_namespace when the mount flags changeDan Williams
Daemons that need to be launched while the rootfs is read-only can now poll /proc/mounts to be notified when their O_RDWR requests may no longer end in EROFS. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-10-23[PATCH] no need for noinline stuff in fs/namespace.c anymoreAl Viro
Stack footprint from hell had been due to many struct nameidata in there. No more. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-23[PATCH] finally get rid of nameidata in namespace.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01[PATCH] pass struct path * to do_add_mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[PATCH] sanitize __user_walk_fd() et.al.Al Viro
* do not pass nameidata; struct path is all the callers want. * switch to new helpers: user_path_at(dfd, pathname, flags, &path) user_path(pathname, &path) user_lpath(pathname, &path) user_path_dir(pathname, &path) (fail if not a directory) The last 3 are trivial macro wrappers for the first one. * remove nameidata in callers. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[PATCH] vfs: use kstrdup() and check failing allocationLi Zefan
- use kstrdup() instead of kmalloc() + memcpy() - return NULL if allocating ->mnt_devname failed - mnt_devname should be const Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[PATCH] kill altrootAl Viro
long overdue... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26Use WARN() in fs/Arjan van de Ven
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14LSM/SELinux: show LSM mount options in /proc/mountsEric Paris
This patch causes SELinux mount options to show up in /proc/mounts. As with other code in the area seq_put errors are ignored. Other LSM's will not have their mount options displayed until they fill in their own security_sb_show_options() function. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: James Morris <jmorris@namei.org>
2008-04-30fs: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29vfs: remove lives_below_in_same_fs()Jan Blunck
Remove lives_below_in_same_fs() since is_subdir() from fs/dcache.c is providing the same functionality. Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28quota: remove superfluous DQUOT_OFF() in fs/namespace.cJan Kara
We don't need to turn quotas off before remounting root ro, because do_remount_sb() already handles this. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25[PATCH] restore sane ->umount_begin() APIAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23[patch 7/7] vfs: mountinfo: show dominating group idMiklos Szeredi
Show peer group ID of nearest dominating group that has intersection with the mount's namespace. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23[patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfoRam Pai
[mszeredi@suse.cz] rewrite and split big patch into managable chunks /proc/mounts in its current form lacks important information: - propagation state - root of mount for bind mounts - the st_dev value used within the filesystem - identifier for each mount and it's parent It also suffers from the following problems: - not easily extendable - ambiguity of mountpoints within a chrooted environment - doesn't distinguish between filesystem dependent and independent options - doesn't distinguish between per mount and per super block options This patch introduces /proc/<pid>/mountinfo which attempts to address all these deficiencies. Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is extracted into separate functions. Thanks to Al Viro for the help in getting the design right. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23[patch 5/7] vfs: mountinfo: allow using process rootMiklos Szeredi
Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate mountpoints. - move definition of 'struct proc_mounts' to <linux/mnt_namespace.h> - add the process's namespace and root to this structure - pass a pointer to 'struct proc_mounts' into seq_operations In addition the following cleanups are made: - use a common open function for /proc/<pid>/{mounts,mountstat} - surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS - make the seq_operations structures const Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23[patch 4/7] vfs: mountinfo: add mount peer group IDMiklos Szeredi
Add a unique ID to each peer group using the IDR infrastructure. The identifiers are reused after the peer group dissolves. The IDR structures are protected by holding namepspace_sem for write while allocating or deallocating IDs. IDs are allocated when a previously unshared vfsmount becomes the first member of a peer group. When a new member is added to an existing group, the ID is copied from one of the old members. IDs are freed when the last member of a peer group is unshared. Setting the MNT_SHARED flag on members of a subtree is done as a separate step, after all the IDs have been allocated. This way an allocation failure can be cleaned up easilty, without affecting the propagation state. Based on design sketch by Al Viro. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-23[patch 3/7] vfs: mountinfo: add mount IDMiklos Szeredi
Add a unique ID to each vfsmount using the IDR infrastructure. The identifiers are reused after the vfsmount is freed. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21[PATCH] get rid of more nameidata passing in namespace.cAl Viro
Further reduction of stack footprint (sys_pivot_root()); lose useless BKL in there, while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21[PATCH] switch a bunch of LSM hooks from nameidata to pathAl Viro
Namely, ones from namespace.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-21[PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()Al Viro
Taking namespace_sem shared there isn't worth the trouble, especially with vfsmount ID allocation about to be added. That way we know that umount_tree(), copy_tree() and clone_mnt() are _always_ serialized by namespace_sem. umount_tree() still needs vfsmount_lock (it manipulates hash chains, among other things), but that's a separate story. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19[PATCH] r/o bind mounts: honor mount writer counts at remountDave Hansen
Originally from: Herbert Poetzl <herbert@13thfloor.at> This is the core of the read-only bind mount patch set. Note that this does _not_ add a "ro" option directly to the bind mount operation. If you require such a mount, you must first do the bind, then follow it up with a 'mount -o remount,ro' operation: If you wish to have a r/o bind mount of /foo on bar: mount --bind /foo /bar mount -o remount,ro /bar Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19[PATCH] r/o bind mounts: track numbers of writers to mountsDave Hansen
This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-19[PATCH] r/o bind mounts: stub functionsDave Hansen
This patch adds two function mnt_want_write() and mnt_drop_write(). These are used like a lock pair around and fs operations that might cause a write to the filesystem. Before these can become useful, we must first cover each place in the VFS where writes are performed with a want/drop pair. When that is complete, we can actually introduce code that will safely check the counts before allowing r/w<->r/o transitions to occur. Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27[PATCH] mnt_expire is protected by namespace_sem, no need for vfsmount_lockAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27[PATCH] do shrink_submounts() for all fs typesAl Viro
... and take it out of ->umount_begin() instances. Call with all locks already taken (by do_umount()) and leave calling release_mounts() to caller (it will do release_mounts() anyway, so we can just put into the same list). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27[PATCH] sanitize locking in mark_mounts_for_expiry() and shrink_submounts()Al Viro
... and fix a race on access of ->mnt_share et.al. without namespace_sem in the latter. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27[PATCH] count ghost references to vfsmountsAl Viro
make propagate_mount_busy() exclude references from the vfsmounts that had been isolated by umount_tree() and are just waiting for release_mounts() to dispose of their ->mnt_parent/->mnt_mountpoint. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-27[PATCH] reduce stack footprint in namespace.cAl Viro
A lot of places misuse struct nameidata when they need struct path. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-14d_path: Make seq_path() use a struct path argumentJan Blunck
seq_path() is always called with a dentry and a vfsmount from a struct path. Make seq_path() take it directly as an argument. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Make set_fs_{root,pwd} take a struct pathJan Blunck
In nearly all cases the set_fs_{root,pwd}() calls work on a struct path. Change the function to reflect this and use path_get() here. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Use struct path in fs_structJan Blunck
* Use struct path in fs_struct. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Introduce path_put()Jan Blunck
* Add path_put() functions for releasing a reference to the dentry and vfsmount of a struct path in the right order * Switch from path_release(nd) to path_put(&nd->path) * Rename dput_path() to path_put_conditional() [akpm@linux-foundation.org: fix cifs] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: <linux-fsdevel@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Embed a struct path into struct nameidata instead of nd->{dentry,mnt}Jan Blunck
This is the central patch of a cleanup series. In most cases there is no good reason why someone would want to use a dentry for itself. This series reflects that fact and embeds a struct path into nameidata. Together with the other patches of this series - it enforced the correct order of getting/releasing the reference count on <dentry,vfsmount> pairs - it prepares the VFS for stacking support since it is essential to have a struct path in every place where the stack can be traversed - it reduces the overall code size: without patch series: text data bss dec hex filename 5321639 858418 715768 6895825 6938d1 vmlinux with patch series: text data bss dec hex filename 5320026 858418 715768 6894212 693284 vmlinux This patch: Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix cifs] [akpm@linux-foundation.org: fix smack] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Remove path_release_on_umount()Jan Blunck
path_release_on_umount() should only be called from sys_umount(). I merged the function into sys_umount() instead of having in in namei.c. Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08reduce large do_mount stack usage with noinlinesEric Sandeen
do_mount() uses a whopping 616 bytes of stack on x86_64 in 2.6.24-mm1, largely thanks to gcc inlining the various helper functions. noinlining these can slim it down a lot; on my box this patch gets it down to 168, which is mostly the struct nameidata nd; left on the stack. These functions are called only as do_mount() helpers; none of them should be in any path that would see a performance benefit from inlining... Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08mount options: add generic_show_options()Miklos Szeredi
Add a new s_options field to struct super_block. Filesystems can save mount options passed to them in mount or remount. It is automatically freed when the superblock is destroyed. A new helper function, generic_show_options() is introduced, which uses this field to display the mount options in /proc/mounts. Another helper function, save_mount_options() may be used by filesystems to save the options in the super block. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Use ilog2() in fs/namespace.cEric Dumazet
We can use ilog2() in fs/namespace.c to compute hash_bits and hash_mask at compile time, not runtime. [akpm@linux-foundation.org: clean it all up] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-24kobject: convert main fs kobject to use kobject_createGreg Kroah-Hartman
This also renames fs_subsys to fs_kobj to catch all current users with a build error instead of a build warning which can easily be missed. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: remove struct kobj_type from struct ksetGreg Kroah-Hartman
We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young <hidave.darkstar@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-21[PATCH] new helpers - collect_mounts() and release_collected_mounts()Al Viro
Get a snapshot of a subtree, creating private clones of vfsmounts for all its components and release such snapshot resp. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-10-19pid namespaces: introduce MS_KERNMOUNT flagPavel Emelyanov
This flag tells the .get_sb callback that this is a kern_mount() call so that it can trust *data pointer to be valid in-kernel one. If this flag is passed from the user process, it is cleared since the *data pointer is not a valid kernel object. Running a few steps forward - this will be needed for proc to create the superblock and store a valid pid namespace on it during the namespace creation. The reason, why the namespace cannot live without proc mount is described in the appropriate patch. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fs: remove the unused mempages parameterDenis Cheng
Since the mempages parameter is actually not used, they should be removed. Now there is only files_init use the mempages parameter, files_init(mempages); but I don't think the adaptation to mempages in files_init is really useful; and if files_init also changed to the prototype void (*func)(void), the wrapper vfs_caches_init would also not need the mempages parameter. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>