| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
net: Allow dependancies of FDDI & Tokenring to be modular.
igb: Fix build warning when DCA is disabled.
net: Fix warning fallout from recent NAPI interface changes.
gro: Fix potential use after free
sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
sfc: When disabling the NIC, close the device rather than unregistering it
sfc: SFT9001: Add cable diagnostics
sfc: Add support for multiple PHY self-tests
sfc: Merge top-level functions for self-tests
sfc: Clean up PHY mode management in loopback self-test
sfc: Fix unreliable link detection in some loopback modes
sfc: Generate unique names for per-NIC workqueues
802.3ad: use standard ethhdr instead of ad_header
802.3ad: generalize out mac address initializer
802.3ad: initialize ports LACPDU from const initializer
802.3ad: remove typedef around ad_system
802.3ad: turn ports is_individual into a bool
802.3ad: turn ports is_enabled into a bool
802.3ad: make ntt bool
ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
...
Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).
|
|
This patch adds server-side support for callbacks other than AUTH_SYS.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The rpc client needs to know the principal that the setclientid was done
as, so it can tell gssd who to authenticate to.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Two principals are involved in krb5 authentication: the target, who we
authenticate *to* (normally the name of the server, like
nfs/server.citi.umich.edu@CITI.UMICH.EDU), and the source, we we
authenticate *as* (normally a user, like bfields@UMICH.EDU)
In the case of NFSv4 callbacks, the target of the callback should be the
source of the client's setclientid call, and the source should be the
nfs server's own principal.
Therefore we allow svcgssd to pass down the name of the principal that
just authenticated, so that on setclientid we can store that principal
name with the new client, to be used later on callbacks.
Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/e1000e/ich8lan.c
|
|
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Thanks to Matthew Dodd for this bug report:
A file label issue while running SELinux in MLS mode provoked the
following bug, which is a result of use before init on a 'struct list_head'.
In nfsd4_list_rec_dir() if the call to dentry_open() fails the 'goto
out' skips INIT_LIST_HEAD() which results in the normally improbable
case where list_entry() returns NULL.
Trace follows.
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
SELinux: Context unconfined_t:object_r:var_lib_nfs_t:s0 is not valid
(left unmapped).
type=1400 audit(1227298063.609:282): avc: denied { read } for
pid=1890 comm="rpc.nfsd" name="v4recovery" dev=dm-0 ino=148726
scontext=system_u:system_r:nfsd_t:s0-s15:c0.c1023
tcontext=system_u:object_r:unlabeled_t:s15:c0.c1023 tclass=dir
BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<c050894e>] list_del+0x6/0x60
*pde = 0d9ce067 *pte = 00000000
Oops: 0000 [#1] SMP
Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs autofs4
sunrpc ipv6 dm_multipath scsi_dh ppdev parport_pc sg parport floppy
ata_piix pata_acpi ata_generic libata pcnet32 i2c_piix4 mii pcspkr
i2c_core dm_snapshot dm_zero dm_mirror dm_log dm_mod BusLogic sd_mod
scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last
unloaded: microcode]
Pid: 1890, comm: rpc.nfsd Not tainted (2.6.27.5-37.fc9.i686 #1)
EIP: 0060:[<c050894e>] EFLAGS: 00010217 CPU: 0
EIP is at list_del+0x6/0x60
EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: cd99e480
ESI: cf9caed8 EDI: 00000000 EBP: cf9caebc ESP: cf9caeb8
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process rpc.nfsd (pid: 1890, ti=cf9ca000 task=cf4de580 task.ti=cf9ca000)
Stack: 00000000 cf9caef0 d0a9f139 c0496d04 d0a9f217 fffffff3 00000000
00000000
00000000 00000000 cf32b220 00000000 00000008 00000801 cf9caefc
d0a9f193
00000000 cf9caf08 d0a9b6ea 00000000 cf9caf1c d0a874f2 cf9c3004
00000008
Call Trace:
[<d0a9f139>] ? nfsd4_list_rec_dir+0xf3/0x13a [nfsd]
[<c0496d04>] ? do_path_lookup+0x12d/0x175
[<d0a9f217>] ? load_recdir+0x0/0x26 [nfsd]
[<d0a9f193>] ? nfsd4_recdir_load+0x13/0x34 [nfsd]
[<d0a9b6ea>] ? nfs4_state_start+0x2a/0xc5 [nfsd]
[<d0a874f2>] ? nfsd_svc+0x51/0xff [nfsd]
[<d0a87f2d>] ? write_svc+0x0/0x1e [nfsd]
[<d0a87f48>] ? write_svc+0x1b/0x1e [nfsd]
[<d0a87854>] ? nfsctl_transaction_write+0x3a/0x61 [nfsd]
[<c04b6a4e>] ? sys_nfsservctl+0x116/0x154
[<c04975c1>] ? putname+0x24/0x2f
[<c04975c1>] ? putname+0x24/0x2f
[<c048d49f>] ? do_sys_open+0xad/0xb7
[<c048d337>] ? filp_close+0x50/0x5a
[<c048d4eb>] ? sys_open+0x1e/0x26
[<c0403cca>] ? syscall_call+0x7/0xb
[<c064007b>] ? init_cyrix+0x185/0x490
=======================
Code: 75 e1 8b 53 08 8d 4b 04 8d 46 04 e8 75 00 00 00 8b 53 10 8d 4b 0c
8d 46 0c e8 67 00 00 00 5b 5e 5f 5d c3 90 90 55 89 e5 53 89 c3 <8b> 40
04 8b 00 39 d8 74 16 50 53 68 3e d6 6f c0 6a 30 68 78 d6
EIP: [<c050894e>] list_del+0x6/0x60 SS:ESP 0068:cf9caeb8
---[ end trace a89c4ad091c4ad53 ]---
Cc: Matthew N. Dodd <Matthew.Dodd@spart.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
If nfsd was shut down before the grace period ended, we could end up
with a freed object still on grace_list. Thanks to Jeff Moyer for
reporting the resulting list corruption warnings.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
|
|
Conflicts:
security/keys/internal.h
security/keys/process_keys.c
security/keys/request_key.c
Fixed conflicts above by using the non 'tsk' versions.
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Differentiate the objective and real subjective credentials from the effective
subjective credentials on a task by introducing a second credentials pointer
into the task_struct.
task_struct::real_cred then refers to the objective and apparent real
subjective credentials of a task, as perceived by the other tasks in the
system.
task_struct::cred then refers to the effective subjective credentials of a
task, as used by that task when it's actually running. These are not visible
to the other tasks in the system.
__task_cred(task) then refers to the objective/real credentials of the task in
question.
current_cred() refers to the effective subjective credentials of the current
task.
prepare_creds() uses the objective creds as a base and commit_creds() changes
both pointers in the task_struct (indeed commit_creds() requires them to be the
same).
override_creds() and revert_creds() change the subjective creds pointer only,
and the former returns the old subjective creds. These are used by NFSD,
faccessat() and do_coredump(), and will by used by CacheFiles.
In SELinux, current_has_perm() is provided as an alternative to
task_has_perm(). This uses the effective subjective context of current,
whereas task_has_perm() uses the objective/real context of the subject.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Inaugurate copy-on-write credentials management. This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.
A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().
With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:
struct cred *new = prepare_creds();
int ret = blah(new);
if (ret < 0) {
abort_creds(new);
return ret;
}
return commit_creds(new);
There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.
To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const. The purpose of this is compile-time
discouragement of altering credentials through those pointers. Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:
(1) Its reference count may incremented and decremented.
(2) The keyrings to which it points may be modified, but not replaced.
The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).
This patch and the preceding patches have been tested with the LTP SELinux
testsuite.
This patch makes several logical sets of alteration:
(1) execve().
This now prepares and commits credentials in various places in the
security code rather than altering the current creds directly.
(2) Temporary credential overrides.
do_coredump() and sys_faccessat() now prepare their own credentials and
temporarily override the ones currently on the acting thread, whilst
preventing interference from other threads by holding cred_replace_mutex
on the thread being dumped.
This will be replaced in a future patch by something that hands down the
credentials directly to the functions being called, rather than altering
the task's objective credentials.
(3) LSM interface.
A number of functions have been changed, added or removed:
(*) security_capset_check(), ->capset_check()
(*) security_capset_set(), ->capset_set()
Removed in favour of security_capset().
(*) security_capset(), ->capset()
New. This is passed a pointer to the new creds, a pointer to the old
creds and the proposed capability sets. It should fill in the new
creds or return an error. All pointers, barring the pointer to the
new creds, are now const.
(*) security_bprm_apply_creds(), ->bprm_apply_creds()
Changed; now returns a value, which will cause the process to be
killed if it's an error.
(*) security_task_alloc(), ->task_alloc_security()
Removed in favour of security_prepare_creds().
(*) security_cred_free(), ->cred_free()
New. Free security data attached to cred->security.
(*) security_prepare_creds(), ->cred_prepare()
New. Duplicate any security data attached to cred->security.
(*) security_commit_creds(), ->cred_commit()
New. Apply any security effects for the upcoming installation of new
security by commit_creds().
(*) security_task_post_setuid(), ->task_post_setuid()
Removed in favour of security_task_fix_setuid().
(*) security_task_fix_setuid(), ->task_fix_setuid()
Fix up the proposed new credentials for setuid(). This is used by
cap_set_fix_setuid() to implicitly adjust capabilities in line with
setuid() changes. Changes are made to the new credentials, rather
than the task itself as in security_task_post_setuid().
(*) security_task_reparent_to_init(), ->task_reparent_to_init()
Removed. Instead the task being reparented to init is referred
directly to init's credentials.
NOTE! This results in the loss of some state: SELinux's osid no
longer records the sid of the thread that forked it.
(*) security_key_alloc(), ->key_alloc()
(*) security_key_permission(), ->key_permission()
Changed. These now take cred pointers rather than task pointers to
refer to the security context.
(4) sys_capset().
This has been simplified and uses less locking. The LSM functions it
calls have been merged.
(5) reparent_to_kthreadd().
This gives the current thread the same credentials as init by simply using
commit_thread() to point that way.
(6) __sigqueue_alloc() and switch_uid()
__sigqueue_alloc() can't stop the target task from changing its creds
beneath it, so this function gets a reference to the currently applicable
user_struct which it then passes into the sigqueue struct it returns if
successful.
switch_uid() is now called from commit_creds(), and possibly should be
folded into that. commit_creds() should take care of protecting
__sigqueue_alloc().
(7) [sg]et[ug]id() and co and [sg]et_current_groups.
The set functions now all use prepare_creds(), commit_creds() and
abort_creds() to build and check a new set of credentials before applying
it.
security_task_set[ug]id() is called inside the prepared section. This
guarantees that nothing else will affect the creds until we've finished.
The calling of set_dumpable() has been moved into commit_creds().
Much of the functionality of set_user() has been moved into
commit_creds().
The get functions all simply access the data directly.
(8) security_task_prctl() and cap_task_prctl().
security_task_prctl() has been modified to return -ENOSYS if it doesn't
want to handle a function, or otherwise return the return value directly
rather than through an argument.
Additionally, cap_task_prctl() now prepares a new set of credentials, even
if it doesn't end up using it.
(9) Keyrings.
A number of changes have been made to the keyrings code:
(a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
all been dropped and built in to the credentials functions directly.
They may want separating out again later.
(b) key_alloc() and search_process_keyrings() now take a cred pointer
rather than a task pointer to specify the security context.
(c) copy_creds() gives a new thread within the same thread group a new
thread keyring if its parent had one, otherwise it discards the thread
keyring.
(d) The authorisation key now points directly to the credentials to extend
the search into rather pointing to the task that carries them.
(e) Installing thread, process or session keyrings causes a new set of
credentials to be created, even though it's not strictly necessary for
process or session keyrings (they're shared).
(10) Usermode helper.
The usermode helper code now carries a cred struct pointer in its
subprocess_info struct instead of a new session keyring pointer. This set
of credentials is derived from init_cred and installed on the new process
after it has been cloned.
call_usermodehelper_setup() allocates the new credentials and
call_usermodehelper_freeinfo() discards them if they haven't been used. A
special cred function (prepare_usermodeinfo_creds()) is provided
specifically for call_usermodehelper_setup() to call.
call_usermodehelper_setkeys() adjusts the credentials to sport the
supplied keyring as the new session keyring.
(11) SELinux.
SELinux has a number of changes, in addition to those to support the LSM
interface changes mentioned above:
(a) selinux_setprocattr() no longer does its check for whether the
current ptracer can access processes with the new SID inside the lock
that covers getting the ptracer's SID. Whilst this lock ensures that
the check is done with the ptracer pinned, the result is only valid
until the lock is released, so there's no point doing it inside the
lock.
(12) is_single_threaded().
This function has been extracted from selinux_setprocattr() and put into
a file of its own in the lib/ directory as join_session_keyring() now
wants to use it too.
The code in SELinux just checked to see whether a task shared mm_structs
with other tasks (CLONE_VM), but that isn't good enough. We really want
to know if they're part of the same thread group (CLONE_THREAD).
(13) nfsd.
The NFS server daemon now has to use the COW credentials to set the
credentials it is going to use. It really needs to pass the credentials
down to the functions it calls, but it can't do that until other patches
in this series have been applied.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Pass credentials through dentry_open() so that the COW creds patch can have
SELinux's flush_unauthorized_files() pass the appropriate creds back to itself
when it opens its null chardev.
The security_dentry_open() call also now takes a creds pointer, as does the
dentry_open hook in struct security_operations.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/message/fusion/mptlan.c
drivers/net/sfc/ethtool.c
net/mac80211/debugfs_sta.c
|
|
Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.
Bisected it back to this commit; reverting it fixes the problem.
It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read. Before 8d7c4203
(but after c002a6c797 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset. That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir. After 8d7c4203, the setting of the eof bit
made this a correctness problem.
So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0. The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.
Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: Doug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/wireless/ath5k/base.c
net/8021q/vlan_core.c
|
|
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before 14f7dd632011bb89c035722edd6ea0d90ca6b078 "[PATCH] Copy XFS
readdir hack into nfsd code", readdir_cd->err was reset to eof before
each call to vfs_readdir; afterwards, it is set only once. Similarly,
c002a6c7977320f95b5edede5ce4e0eeecf291ff "[PATCH] Optimise NFS readdir
hack slightly", can cause us to exit without nfserr_eof set. Fix this.
This ensures the "eof" bit is set when needed in readdir replies. (The
particular case I saw was an nfsv4 readdir of an empty directory, which
returned with no entries (the protocol requires "." and ".." to be
filtered out), but with eof unset.)
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (46 commits)
[PATCH] fs: add a sanity check in d_free
[PATCH] i_version: remount support
[patch] vfs: make security_inode_setattr() calling consistent
[patch 1/3] FS_MBCACHE: don't needlessly make it built-in
[PATCH] move executable checking into ->permission()
[PATCH] fs/dcache.c: update comment of d_validate()
[RFC PATCH] touch_mnt_namespace when the mount flags change
[PATCH] reiserfs: add missing llseek method
[PATCH] fix ->llseek for more directories
[PATCH vfs-2.6 6/6] vfs: add LOOKUP_RENAME_TARGET intent
[PATCH vfs-2.6 5/6] vfs: remove LOOKUP_PARENT from non LOOKUP_PARENT lookup
[PATCH vfs-2.6 4/6] vfs: remove unnecessary fsnotify_d_instantiate()
[PATCH vfs-2.6 3/6] vfs: add __d_instantiate() helper
[PATCH vfs-2.6 2/6] vfs: add d_ancestor()
[PATCH vfs-2.6 1/6] vfs: replace parent == dentry->d_parent by IS_ROOT()
[PATCH] get rid of on-stack dentry in udf
[PATCH 2/2] anondev: switch to IDA
[PATCH 1/2] anondev: init IDR statically
[JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup()
[PATCH] Optimise NFS readdir hack slightly.
...
|
|
Avoid calling the underlying ->readdir() again when we reached the end
already; keep going round the loop only if we stopped due to our own
buffer being full.
[AV: tidy the things up a bit, while we are there]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It's not the final state, but it allows moving ->readdir() instances
to passing filldir return value to caller of vfs_readdir().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some file systems with their own internal locking have problems with the
way that nfsd calls the ->lookup() method from within a filldir function
called from their ->readdir() method. The recursion back into the file
system code can cause deadlock.
XFS has a fairly hackish solution to this which involves doing the
readdir() into a locally-allocated buffer, then going back through it
calling the filldir function afterwards. It's not ideal, but it works.
It's particularly suboptimal because XFS does this for local file
systems too, where it's completely unnecessary.
Copy this hack into the NFS code where it can be used only for NFS
export. In response to feedback, use it unconditionally rather than only
for the affected file systems.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
clean up the exit paths, get rid of nameidata
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
We might as well do all of these at the end. Fix up a couple minor
style nits while we're there.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Drop reference to export key on error. Compile tested.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Fix a memory leak in nfsd_getxattr. nfsd_getxattr should free up memory
that it allocated if vfs_getxattr fails.
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The Linux NFS server can be started via a user-space write to
/proc/fs/nfs/threads or to /proc/fs/nfs/portlist. In the first case,
all default listeners are started (both UDP and TCP). In the second,
a listener is started only for one specified transport.
The NFS server has to make sure lockd stays up until the last listener
transport goes away. To support both start-up interfaces, it should
do one lockd_up() for each NFSD listener.
The nfsd_init_socks() function used to do one lockd_up() call for each
svc_create_xprt(). Recently commit
26a414092353590ceaa5955bcb53f863d6ea7549 mistakenly changed
nfsd_init_socks() to do only one lockd_up() call even though it still
does two svc_create_xprt() calls.
The end result is a lockd_down() BUG during NFSD shutdown processing
because nfsd_last_threads() does a lockd_down() call for each entry
on the sv_permsocks list, but the start-up code doesn't do a matching
number of lockd_up() calls.
Add a second lockd_up() in nfsd_init_socks() to make sure the number
of lockd_up() calls matches the number of entries on the NFS servers's
sv_permsocks list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: The svc_addsock() function no longer uses its "proto"
argument, so remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Clean up: Now that lockd_up() starts listeners for both transports, the
"proto" argument is no longer needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Rewrite grace period code to unify management of grace period across
lockd and nfsd. The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it. This creates a slight race condition, since
the enforcement is not coordinated. It's also more complicated than
necessary.
Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.
We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
since commit ff7d9756b501744540be65e172d27ee321d86103
"nfsd: use static memory for callback program and stats"
do_probe_callback uses a static callback program
(NFS4_CALLBACK) rather than the one set in clp->cl_callback.cb_prog
as passed in by the client in setclientid (4.0)
or create_session (4.1).
This patches introduces rpc_create_args.prognumber that allows
overriding program->number when creating rpc_clnt.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Now that cb_stats are static (since commit
ff7d9756b501744540be65e172d27ee321d86103)
there's no need to clear them.
Initially I thought it might make sense to do
that every callback probing but since the stats
are per-program and they are shared between possibly
several client callback instances, zeroing them out
seems like the wrong thing to do.
Note that that commit also introduced a bug
since stats.program is also being cleared in the process
and it is not restored after the memset as it used to be.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
I had a report from someone building a large NFS server that they were
unable to start more than 585 nfsd threads. It was reported against an
older kernel using the slab allocator, and I tracked it down to the
large allocation in nfsd_racache_init failing.
It appears that the slub allocator handles large allocations better,
but large contiguous allocations can often be problematic. There
doesn't seem to be any reason that the racache has to be allocated as a
single large chunk. This patch breaks this up so that the racache is
built up from separate allocations.
(Thanks also to Takashi Iwai for a bugfix.)
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
After using the encode_stateid helper the "p" pointer declared
by ENCODE_SEQID_OP_HEAD is warned as unused.
In the single site where it is still needed it can be declared
separately using the ENCODE_HEAD macro.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
nfsd4_encode_open first reservation is currently for 36 + sizeof(stateid_t)
while it writes after the stateid a cinfo (20 bytes) and 5 more 4-bytes
words, for a total of 40 + sizeof(stateid_t).
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
RFC 2623 section 2.3.2 permits the server to bypass gss authentication
checks for certain operations that a client may perform when mounting.
In the case of a client that doesn't have some form of credentials
available to it on boot, this allows it to perform the mount unattended.
(Presumably real file access won't be needed until a user with
credentials logs in.)
Being slightly more lenient allows lots of old clients to access
krb5-only exports, with the only loss being a small amount of
information leaked about the root directory of the export.
This affects only v2 and v3; v4 still requires authentication for all
access.
Thanks to Peter Staubach testing against a Solaris client, which
suggesting addition of v3 getattr, to the list, and to Trond for noting
that doing so exposes no additional information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
|
|
Introduce and initialize an address family field in the svc_serv structure.
This field will determine what family to use for the service's listener
sockets and what families are advertised via the local rpcbind daemon.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
The array we kmalloc() here is not large enough.
Thanks to Johann Dahm and David Richter for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Richter <richterd@citi.umich.edu>
Tested-by: Johann Dahm <jdahm@umich.edu>
|
|
Move the cstate_alloc call so that if it fails, the response is setup to
encode the NFS error. The out label now means that the
nfsd4_compound_state has not been allocated.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
|
|
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux:
fs/nfsd/export.c: Adjust error handling code involving auth_domain_put
MAINTAINERS: mention lockd and sunrpc in nfs entries
lockd: trivial sparse endian annotations
|
|
There doesn't seem to be a compelling reason why nfsd4_op_name() is
marked as "inline":
It's only used in a dprintk(), and as long as it has only one caller
non-ancient gcc versions anyway inline it automatically.
This patch fixes the following compile error with gcc 3.4:
...
CC fs/nfsd/nfs4proc.o
nfs4proc.c: In function `nfsd4_proc_compound':
nfs4proc.c:854: sorry, unimplemented: inlining failed in call to
nfs4proc.c:897: sorry, unimplemented: called from here
make[3]: *** [fs/nfsd/nfs4proc.o] Error 1
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
[ Also made it "const char *" - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
