summaryrefslogtreecommitdiff
path: root/include/acpi
AgeCommit message (Collapse)Author
2015-04-28ACPICA: remove duplicate u8 typedefOlaf Hering
During commit e252652fb266 ("ACPICA: acpidump: Remove integer types translation protection.") two 'unsigned char' types got converted to 'u8'. The result does not compile with gcc-4.5, it can not cope with duplicate typedefs. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-24Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull initial ACPI support for arm64 from Will Deacon: "This series introduces preliminary ACPI 5.1 support to the arm64 kernel using the "hardware reduced" profile. We don't support any peripherals yet, so it's fairly limited in scope: - MEMORY init (UEFI) - ACPI discovery (RSDP via UEFI) - CPU init (FADT) - GIC init (MADT) - SMP boot (MADT + PSCI) - ACPI Kconfig options (dependent on EXPERT) ACPI for arm64 has been in development for a while now and hardware has been available that can boot with either FDT or ACPI tables. This has been made possible by both changes to the ACPI spec to cater for ARM-based machines (known as "hardware-reduced" in ACPI parlance) but also a Linaro-driven effort to get this supported on top of the Linux kernel. This pull request is the result of that work. These changes allow us to initialise the CPUs, interrupt controller, and timers via ACPI tables, with memory information and cmdline coming from EFI. We don't support a hybrid ACPI/FDT scheme. Of course, there is still plenty of work to do (a serial console would be nice!) but I expect that to happen on a per-driver basis after this core series has been merged. Anyway, the diff stat here is fairly horrible, but splitting this up and merging it via all the different subsystems would have been extremely painful. Instead, we've got all the relevant Acks in place and I've not seen anything other than trivial (Kconfig) conflicts in -next (for completeness, I've included my resolution below). Nearly half of the insertions fall under Documentation/. So, we'll see how this goes. Right now, it all depends on EXPERT and I fully expect people to use FDT by default for the immediate future" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits) ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface() ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface ARM64: kernel: acpi: honour acpi=force command line parameter ARM64: kernel: acpi: refactor ACPI tables init and checks ARM64: kernel: psci: let ACPI probe PSCI version ARM64: kernel: psci: factor out probe function ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed ARM64 / ACPI: additions of ACPI documentation for arm64 Documentation: ACPI for ARM64 ARM64 / ACPI: Enable ARM64 in Kconfig XEN / ACPI: Make XEN ACPI depend on X86 ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 clocksource / arch_timer: Parse GTDT to initialize arch timer irqchip: Add GICv2 specific ACPI boot support ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ACPI / processor: Make it possible to get CPU hardware ID via GICC ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID ARM64 / ACPI: Parse MADT for SMP initialization ...
2015-04-17Merge tag 'acpica-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPICA updates from Rafael Wysocki: "This updates the kernel's ACPICA code to upstream revision 20150410 and adds a fix for a GPE handling regression introduced during the 3.19 cycle on top of that. Included are two stable-candidate bug fixes (one of them fixing a 3.16 regression), multiple other fixes and a bunch of cleanups. Specifics: - Fix for a GPE handling regression on Dell Latitude D600 that caused GPE signaling to stop working on that machine, which appears to be due to a hardware glitch, but it used to work and it can be made work again in a relativly straightforward way (Rafael J Wysocki). - Fix for a mutex unlock regression related to the handling of ACPI tables introduced during the 3.16 development cycle (Octavian Purdila). - _REV modification to always return 2 which has been done by all versions of Windows since NT and the firmware people started to use it to distinguish between OSes in their AML and do some silly and wrong things on that basis (Bob Moore). - Fixes and cleanups related to the acpi_physicall_address data type including one stable-candidate fix for an issue occasionally occuring on 64-bit machines running 32-bit kernels where using offsets provided by the firmware may lead to address overflows (Lv Zheng). - External() opcode support infrastructure needed for recompiling disassembled ACPI tables in some cases including interpreter modification to ignore that opcode (Bob Moore). - Support for the "Windows 2015" string in _OSI (Bob Moore). - GPE debug interface change to return values read from hardware registers (Lv Zheng). - Removal of the __DATE__ macro usage in tools (Rasmus Villemoes). - Assorted minor fixes and cleanups (Lv Zheng, Rickard Strandqvist, Bob Moore)" * tag 'acpica-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Store GPE register enable masks upfront ACPICA: Update version to 20150410. ACPICA: Fix a couple issues with the local printf module. ACPICA: Disassembler: Some cleanup of the table dump module. ACPICA: iASL: Add support for MSDM ACPI table. ACPICA: Update for SLIC ACPI table. ACPICA: Add "//" before ascii output of buffers. ACPICA: Remove unused internal AML opcode. ACPICA: Permanently set _REV to the value '2'. ACPICA: Add "Windows 2015" string to _OSI support. ACPICA: Add infrastructure for External() opcode. ACPICA: iASL: Enhancement for constant folding. ACPICA: iASL/Disassembler: Add option to assume table contains valid AML. ACPICA: Update AML Debugger global variables. ACPICA: Update Resource descriptor dump module. ACPICA: Fix a sscanf format string. ACPICA: Casting changes around acpi_physical_address/acpi_size. ACPICA: Resources: Correct conditional compilation definitions. ACPICA: Utilities: Correct conditional compilation definitions. ACPICA: Tables: Move an iasl specific table function to iasl source file. ...
2015-04-15ACPICA: Store GPE register enable masks upfrontRafael J. Wysocki
It is reported that ACPI interrupts do not work any more on Dell Latitude D600 after commit c50f13c672df (ACPICA: Save current masks of enabled GPEs after enable register writes). The problem turns out to be related to the fact that the enable_mask and enable_for_run GPE bit masks are not in sync (in the absence of any system suspend/resume events) for at least one GPE register on that machine. Address this problem by writing the enable_for_run mask into enable_mask as soon as enable_for_run is updated instead of doing that only after the subsequent register write has succeeded. For consistency, update acpi_hw_gpe_enable_write() to store the bit mask to be written into the GPE register in enable_mask unconditionally before the write. Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after that, drop it along with the symbols depending on it. Reported-and-tested-by: Jim Bos <jim876@xs4all.nl> Fixes: c50f13c672df (ACPICA: Save current masks of enabled GPEs after enable register writes) Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Update version to 20150410.Bob Moore
ACPICA commit 06198cfd96ef271f554a50f1830a5975468c39ac ACPICA commit 8a3c1df1edb5f9fc5c940500c598c0107d30df71 Version 20150410. Link: https://github.com/acpica/acpica/commit/06198cfd Link: https://github.com/acpica/acpica/commit/8a3c1df1 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Disassembler: Some cleanup of the table dump module.Bob Moore
ACPICA commit 330e3b7ec96fbd2e0677b786c09d86be36dd5673 Cleanup of LPIT table output (Dean Nelson) Split some long lines. Link: https://github.com/acpica/acpica/commit/330e3b7e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: iASL: Add support for MSDM ACPI table.Bob Moore
ACPICA commit a2c590ce9bff850e3abf4fd430cede860a3cb1fa This is the Microsoft Data Management table. MSDM table is not used in the Linux kernel. Link: https://github.com/acpica/acpica/commit/a2c590ce Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Update for SLIC ACPI table.Bob Moore
ACPICA commit c73195e13d6ad53dd7f03f86cea03c7dec72ffd3 Update to latest table definition, which contains major changes. SLIC table is not used in the Linux kernel. Link: https://github.com/acpica/acpica/commit/c73195e1 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Add "Windows 2015" string to _OSI support.Bob Moore
ACPICA commit b293f602a67da478ae0bec129e68bd99787d9908 This change adds this string for Windows 10. Link: https://github.com/acpica/acpica/commit/b293f602 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Events: Add support to return both enable/status register values for ↵Lv Zheng
GPE and fixed event. ACPICA commit e25d791e4b3d5b9f4ead298269610cb05f89749a There is a facility in Linux, developers can obtain GPE and fixed event status via /sys/firmware/interrupts/. This is implemented using acpi_get_event_status() and acpi_get_gpe_status(). Recently while debugging some GPE race issues, it is found that the facility is lacking in the ability to obtain real hardware register values, the confusing information makes debugging difficult. This patch modifies acpi_get_gpe_status() to return EN register values to fix this gap. Then flags returned from acpi_get_event_status() and acpi_get_gpe_status() are also cleaned up to reflect this change. The old ACPI_EVENT_FLAG_SET is carefully kept to avoid regressions. It can be deleted after we can make sure all its references are removed from OSPM code. Lv Zheng. Link: https://github.com/acpica/acpica/commit/e25d791e Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Utilities: split IO address types from data type models.Lv Zheng
ACPICA commit aacf863cfffd46338e268b7415f7435cae93b451 It is reported that on a physically 64-bit addressed machine, 32-bit kernel can trigger crashes in accessing the memory regions that are beyond the 32-bit boundary. The region field's start address should still be 32-bit compliant, but after a calculation (adding some offsets), it may exceed the 32-bit boundary. This case is rare and buggy, but there are real BIOSes leaked with such issues (see References below). This patch fixes this gap by always defining IO addresses as 64-bit, and allows OSPMs to optimize it for a real 32-bit machine to reduce the size of the internal objects. Internal acpi_physical_address usages in the structures that can be fixed by this change include: 1. struct acpi_object_region: acpi_physical_address address; 2. struct acpi_address_range: acpi_physical_address start_address; acpi_physical_address end_address; 3. struct acpi_mem_space_context; acpi_physical_address address; 4. struct acpi_table_desc acpi_physical_address address; See known issues 1 for other usages. Note that acpi_io_address which is used for ACPI_PROCESSOR may also suffer from same problem, so this patch changes it accordingly. For iasl, it will enforce acpi_physical_address as 32-bit to generate 32-bit OSPM compatible tables on 32-bit platforms, we need to define ACPI_32BIT_PHYSICAL_ADDRESS for it in acenv.h. Known issues: 1. Cleanup of mapped virtual address In struct acpi_mem_space_context, acpi_physical_address is used as a virtual address: acpi_physical_address mapped_physical_address; It is better to introduce acpi_virtual_address or use acpi_size instead. This patch doesn't make such a change. Because this should be done along with a change to acpi_os_map_memory()/acpi_os_unmap_memory(). There should be no functional problem to leave this unchanged except that only this structure is enlarged unexpectedly. Link: https://github.com/acpica/acpica/commit/aacf863c Reference: https://bugzilla.kernel.org/show_bug.cgi?id=87971 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=79501 Reported-and-tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Reported-and-tested-by: Sial Nije <sialnije@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.Lv Zheng
ACPICA commit 7d9fd64397d7c38899d3dc497525f6e6b044e0e3 OSPMs like Linux expect an acpi_physical_address returning value from acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't equal to sizeof (acpi_physical_address): drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default] In file included from include/acpi/acpi.h:64:0, from include/linux/acpi.h:36, from drivers/acpi/osl.c:41: include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *' This patch corrects acpi_find_root_pointer(). Link: https://github.com/acpica/acpica/commit/7d9fd643 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-13Merge branch 'device-properties'Rafael J. Wysocki
* device-properties: device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes driver core: Implement device property accessors through fwnode ones driver core: property: Update fwnode_property_read_string_array() driver core: Add comments about returning array counts ACPI: Introduce has_acpi_companion() driver core / ACPI: Represent ACPI companions using fwnode_handle
2015-03-26ACPI / processor: Introduce phys_cpuid_t for CPU hardware IDCatalin Marinas
CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor, but phys_id is used as int in acpi processor driver, so it will lead to some inconsistence for the drivers. Furthermore, to cater for ACPI arch ports that implement 64 bits CPU ids a generic CPU physical id type is required. So introduce typedef u32 phys_cpuid_t in a common file, and introduce a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined by other archs, this will solve the inconsistence in acpi processor driver, and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID in the following patch. CC: Rafael J Wysocki <rjw@rjwysocki.net> Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [hj: reworked cpu physid map return codes] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-25ACPI: fix acpi_os_ioremap for arm64Mark Salter
The acpi_os_ioremap() function may be used to map normal RAM or IO regions. The current implementation simply uses ioremap_cache(). This will work for some architectures, but arm64 ioremap_cache() cannot be used to map IO regions which don't support caching. So for arm64, use ioremap() for non-RAM regions. CC: Rafael J Wysocki <rjw@rjwysocki.net> CC: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Robert Richter <rrichter@cavium.com> Tested-by: Timur Tabi <timur@codeaurora.org> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-18ACPI: Add acpi_device_uid() for convenienceAdrian Hunter
Add a nicer way to get the ACPI _UID. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-16driver core / ACPI: Represent ACPI companions using fwnode_handleRafael J. Wysocki
Now that we have struct fwnode_handle, we can use that to point to ACPI companions from struct device objects instead of pointing to struct acpi_device directly. There are two benefits from that. First, the somewhat ugly and hackish struct acpi_dev_node can be dropped and, second, the same struct fwnode_handle pointer can be used in the future to point to other (non-ACPI) firmware device node types. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2015-02-19Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal managament updates from Zhang Rui: "Specifics: - Abstract the code and introduce helper functions for all int340x thermal drivers. From: Srinivas Pandruvada. - Reorganize the ACPI LPAT table support code so that it can be shared for both ACPI PMIC driver and int340x thermal driver. - Add support for Braswell in intel_soc_dts thermal driver. - a couple of small fixes/cleanups for step_wise governor and int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal/int340x_thermal: remove unused uuids. thermal: step_wise: spelling fixes thermal: int340x: fix sparse warning Thermal/int340x: LPAT conversion for temperature ACPI / PMIC: Use common LPAT table handling functions ACPI / LPAT: Common table processing functions thermal: Intel SoC DTS: Add Braswell support Thermal/int340x/int3402: Provide notification support Thermal/int340x/processor_thermal: Add thermal zone support Thermal/int340x/int3403: Use int340x thermal API Thermal/int340x/int3402: Use int340x thermal API Thermal/int340x: Add common thermal zone handler
2015-02-12kernel.h: remove ancient __FUNCTION__ hackRasmus Villemoes
__FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so this only helps people who only test-compile using 3.3 (compiler-gcc3.h barks at anything older than that). Besides, there are almost no occurrences of __FUNCTION__ left in the tree. [akpm@linux-foundation.org: convert remaining __FUNCTION__ references] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-05ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for ↵Lv Zheng
the current GPE APIs ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1 Since whether the GPE should be disabled/enabled/cleared should only be determined by the GPE driver's state machine: 1. GPE should be disabled if the driver wants to switch to the GPE polling mode when a GPE storm condition is indicated and should be enabled if the driver wants to switch back to the GPE interrupt mode when all of the storm conditions are cleared. The conditions should be protected by the driver's specific lock. 2. GPE should be enabled if the driver has accepted more than one request and should be disabled if the driver has completed all of the requests. The request count should be protected by the driver's specific lock. 3. GPE should be cleared either when the driver is about to handle an edge triggered GPE or when the driver has completed to handle a level triggered GPE. The handling code should be protected by the driver's specific lock. Thus the GPE enabling/disabling/clearing operations are likely to be performed with the driver's specific lock held while we currently cannot do this. This is because: 1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's handler. Driver's specific lock is likely to be held inside of the handler, thus we can see some dead lock issues due to the reversed locking order or recursive locking. In order to solve such dead lock issues, we need to unlock the acpi_gbl_gpe_lock before invoking the handler. BZ 1100. 2. Since GPE disabling/enabling/clearing should be determined by the GPE driver's state machine, we shouldn't perform such operations inside of ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101. Originally this patch includes a logic to flush GPE handlers, it is dropped due to the following reasons: 1. This is a different issue; 2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete(). We will pick up this topic when the Linux OSL fix turns out to be not sufficient. Note that currently the internal operations and the acpi_gbl_gpe_lock are also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In order not to introduce regressions, we add one ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before invoking the GPE handler and the internal enabling/disabling operations are bypassed to allow drivers to perform them at a proper position using the GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe() instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE clearing code in acpi_enable_gpe(). Lv Zheng. Known issues: 1. Edge-triggered GPE lost for frequent enablings On some buggy silicon platforms, GPE enable line may not be directly wired to the GPE trigger line. In that case, when GPE enabling is frequently performed for edge-triggered GPEs, GPE status may stay set without being triggered. This patch may maginify this problem as it allows GPE enabling to be parallel performed during the process the GPEs are handled. This is an existing issue, because: 1. For task context: Current ACPI_GPE_DISPATCH_METHOD practices have proven that this isn't a real issue - we can re-enable edge-triggered GPE in a work queue where the GPE status bit might already be set. 2. For IRQ context: This can even happen when the GPE enabling occurs before returning from the GPE handler and after unlocking the GPE lock. Thus currently no code is included to protect this. Link: https://github.com/acpica/acpica/commit/199cad16 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05ACPICA: Update version to 20150204David E. Box
ACPICA commit e06b1624b02dc8317d144e9a6fe9d684c5fa2f90 Version 20150204. Link: https://github.com/acpica/acpica/commit/e06b1624 Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05ACPICA: Update Copyright headers to 2015David E. Box
ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36 Link: https://github.com/acpica/acpica/commit/8990e73a Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05ACPICA: Events: Cleanup GPE dispatcher type obtaining codeLv Zheng
ACPICA commit 7926d5ca9452c87f866938dcea8f12e1efb58f89 There is an issue in acpi_install_gpe_handler() and acpi_remove_gpe_handler(). The code to obtain the GPE dispatcher type from the Handler->original_flags is wrong: if (((Handler->original_flags & ACPI_GPE_DISPATCH_METHOD) || (Handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) && ACPI_GPE_DISPATCH_NOTIFY is 0x03 and ACPI_GPE_DISPATCH_METHOD is 0x02, thus this statement is TRUE for the following dispatcher types: 0x01 (ACPI_GPE_DISPATCH_HANDLER): not expected 0x02 (ACPI_GPE_DISPATCH_METHOD): expected 0x03 (ACPI_GPE_DISPATCH_NOTIFY): expected There is no functional issue due to this because Handler->original_flags is only set in acpi_install_gpe_handler(), and an earlier checker has excluded the ACPI_GPE_DISPATCH_HANDLER: if ((gpe_event_info->Flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_HANDLER) { Status = AE_ALREADY_EXISTS; goto free_and_exit; } ... Handler->original_flags = (u8) (gpe_event_info->Flags & (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK)); We need to clean this up before modifying the GPE dispatcher type values. In order to prevent such issue from happening in the future, this patch introduces ACPI_GPE_DISPATCH_TYPE() macro to be used to obtain the GPE dispatcher types. Lv Zheng. Link: https://github.com/acpica/acpica/commit/7926d5ca Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-29ACPI / LPAT: Common table processing functionsSrinivas Pandruvada
Since LPAT table processing is also required for other thermal drivers, moved LPAT table related functions from intel PMIC driver (intel_pmic.c) to a stand alonge module with exported interfaces. In this way there will be no code duplication. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-01-26ACPICA: Resources: Provide common part for struct acpi_resource_address ↵Lv Zheng
structures. struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts just at different offsets. To unify the parsing functions, OSPMs like Linux need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can extract the shared data. This patch also synchronizes the structure changes to the Linux kernel. The usages are searched by matching the following keywords: 1. acpi_resource_address 2. acpi_resource_extended_address 3. ACPI_RESOURCE_TYPE_ADDRESS 4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS And we found and fixed the usages in the following files: arch/ia64/kernel/acpi-ext.c arch/ia64/pci/pci.c arch/x86/pci/acpi.c arch/x86/pci/mmconfig-shared.c drivers/xen/xen-acpi-memhotplug.c drivers/acpi/acpi_memhotplug.c drivers/acpi/pci_root.c drivers/acpi/resource.c drivers/char/hpet.c drivers/pnp/pnpacpi/rsparser.c drivers/hv/vmbus_drv.c Build tests are passed with defconfig/allnoconfig/allyesconfig and defconfig+CONFIG_ACPI=n. Original-by: Thomas Gleixner <tglx@linutronix.de> Original-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-26ACPI: Introduce acpi_unload_parent_table() usages in Linux kernelLv Zheng
ACPICA has implemented acpi_unload_parent_table() which can exactly replace the acpi_get_id()/acpi_unload_table_id() implemented in Linux kernel. The acpi_unload_parent_table() has been unit tested in ACPICA simulation environment. This patch can also help to reduce the source code differences between Linux and ACPICA. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-05ACPI / processor: Convert apic_id to phys_id to make it arch agnosticHanjun Guo
apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-12ACPI / PM: Do not disable wakeup GPEs that have not been enabledRafael J. Wysocki
In some cases acpi_device_wakeup() may be called to ensure wakeup power to be off for a given device even though that device's wakeup GPE has not been enabled so far. It calls acpi_disable_gpe() on a GPE that's not enabled and this causes ACPICA to return the AE_LIMIT status code from that call which then is reported as an error by the ACPICA's debug facilities (if enabled). This may lead to a fair amount of confusion, so introduce a new ACPI device wakeup flag to store the wakeup GPE status and avoid disabling wakeup GPEs that have not been enabled. Reported-and-tested-by: Venkat Raghavulu <venkat.raghavulu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-08Merge branch 'pm-runtime'Rafael J. Wysocki
* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
2014-12-08Merge branches 'acpi-scan', 'acpi-pm', 'acpi-lpss' and 'acpi-processor'Rafael J. Wysocki
* acpi-scan: ACPI: Add _DEP support to fix battery issue on Asus T100TA * acpi-pm: ACPI / sleep: Drain outstanding events after disabling multiple GPEs ACPI / PM: Fixed a typo in a comment * acpi-lpss: dmaengine: dw: enable runtime PM ACPI / LPSS: introduce a 'proxy' device to power on LPSS for DMA ACPI / LPSS: allow to use specific PM domain during ->probe() ACPI / LPSS: add all LPSS devices to the specific power domain * acpi-processor: ACPI / cpuidle: avoid assigning signed errno to acpi_status ACPI / processor: remove unused variabled from acpi_processor_power structure ACPI / processor: Update the comments in processor.h
2014-12-08Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Events: Always modify GPE registers under the GPE lock ACPICA: Save current masks of enabled GPEs after enable register writes ACPICA: Update version to 20141107. ACPICA: Disassembler: Emit correct string for 0 stop bits. ACPICA: Disassembler: Update for C-style expressions. ACPICA: Disassembler: Add support for C-style operators and expressions. ACPICA: acpiexec: Add option to specify an object initialization file. ACPICA: iASL: Add support for to_PLD macro.
2014-12-04ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI coreRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in the ACPI core code. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-01ACPICA: Save current masks of enabled GPEs after enable register writesRafael J. Wysocki
There is a race condition between acpi_hw_disable_all_gpes() or acpi_enable_all_wakeup_gpes() and acpi_ev_asynch_enable_gpe() such that if the latter wins the race, it may mistakenly enable a GPE disabled by the former. This may lead to premature system wakeups during system suspend and potentially to more serious consequences. The source of the problem is how acpi_hw_low_set_gpe() works when passed ACPI_GPE_CONDITIONAL_ENABLE as the second argument. In that case, the GPE will be enabled if the corresponding bit is set in the enable_for_run mask of the GPE enable register containing that bit. However, acpi_hw_disable_all_gpes() and acpi_enable_all_wakeup_gpes() don't modify the enable_for_run masks of GPE registers when writing to them. In consequence, if acpi_ev_asynch_enable_gpe(), which eventually calls acpi_hw_low_set_gpe() with the second argument equal to ACPI_GPE_CONDITIONAL_ENABLE, is executed in parallel with one of these functions, it may reverse changes made by them. To fix the problem, introduce a new enable_mask field in struct acpi_gpe_register_info in which to store the current mask of enabled GPEs and modify acpi_hw_low_set_gpe() to take this mask into account instead of enable_for_run when its second argument is equal to ACPI_GPE_CONDITIONAL_ENABLE. Also modify the low-level routines called by acpi_hw_disable_all_gpes(), acpi_enable_all_wakeup_gpes() and acpi_enable_all_runtime_gpes() to update the enable_mask masks of GPE registers after all (successful) writes to those registers. Acked-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-28ACPICA: Update version to 20141107.Bob Moore
Version 20141107. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-28ACPICA: iASL: Add support for to_PLD macro.Bob Moore
This macro is intended to simplify the constuction of _PLD buffers. NOTE: Prototype only, subject to change before this macro is added to the ACPI specification. David E. Box. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-25ACPI / processor: remove unused variabled from acpi_processor_power structureSudeep Holla
Few elements in the acpi_processor_power structure are unused. It could be remnant in the header missed while the code got removed from the corresponding driver file. This patch removes those unused variables in the structure declaration. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-24ACPI: Add _DEP support to fix battery issue on Asus T100TALan Tianyu
ACPI 5.0 introduces _DEP (Operation Region Dependencies) to designate device objects that OSPM should assign a higher priority in start ordering due to future operation region accesses. On Asus T100TA, ACPI battery info are read from a I2C slave device via I2C operation region. Before I2C operation region handler is installed, battery _STA always returns 0. There is a _DEP method of designating start order under battery device node. This patch is to implement _DEP feature to fix battery issue on the Asus T100TA. Introducing acpi_dep_list and adding dep_unmet count in struct acpi_device. During ACPI namespace scan, create struct acpi_dep_data for a valid pair of master (device pointed to by _DEP)/ slave(device with _DEP), record master's and slave's ACPI handle in it and put it into acpi_dep_list. The dep_unmet count will increase by one if there is a device under its _DEP. Driver's probe() should return EPROBE_DEFER when find dep_unmet is larger than 0. When I2C operation region handler is installed, remove all struct acpi_dep_data on the acpi_dep_list whose master is pointed to I2C host controller and decrease slave's dep_unmet. When dep_unmet decreases to 0, all _DEP conditions are met and then do acpi_bus_attach() for the device in order to resolve battery _STA issue on the Asus T100TA. Link: https://bugzilla.kernel.org/show_bug.cgi?id=69011 Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org> Tested-by: Adam Williamson <adamw@happyassassin.net> Tested-by: Michael Shigorin <shigorin@gmail.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-11ACPI / processor: Update the comments in processor.hHanjun Guo
In commit 46ba51e (ACPI / processor: Introduce ARCH_MIGHT_HAVE_ACPI_PDC), acpi_processor_set_pdc() was moved to processor_pdc.c, so update the comments accordingly. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI / GPIO: Driver GPIO mappings for ACPI GPIOsRafael J. Wysocki
Provide a way for device drivers using GPIOs described by ACPI GpioIo resources in _CRS to tell the GPIO subsystem what names (connection IDs) to associate with specific GPIO pins defined in there. To do that, a driver needs to define a mapping table as a NULL-terminated array of struct acpi_gpio_mapping objects that each contain a name, a pointer to an array of line data (struct acpi_gpio_params) objects and the size of that array. Each struct acpi_gpio_params object consists of three fields, crs_entry_index, line_index, active_low, representing the index of the target GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target line in that resource starting from zero, and the active-low flag for that line, respectively. Next, the mapping table needs to be passed as the second argument to acpi_dev_add_driver_gpios() that will register it with the ACPI device object pointed to by its first argument. That should be done in the driver's .probe() routine. On removal, the driver should unregister its GPIO mapping table by calling acpi_dev_remove_driver_gpios() on the ACPI device object where that table was previously registered. Included are fixes from Mika Westerberg. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04Driver core: Unified interface for firmware node propertiesRafael J. Wysocki
Add new generic routines are provided for retrieving properties from device description objects in the platform firmware in case there are no struct device objects for them (either those objects have not been created yet or they do not exist at all). The following functions are provided: fwnode_property_present() fwnode_property_read_u8() fwnode_property_read_u16() fwnode_property_read_u32() fwnode_property_read_u64() fwnode_property_read_string() fwnode_property_read_u8_array() fwnode_property_read_u16_array() fwnode_property_read_u32_array() fwnode_property_read_u64_array() fwnode_property_read_string_array() in analogy with the corresponding functions for struct device added previously. For all of them, the first argument is a pointer to struct fwnode_handle (new type) that allows a device description object (depending on what platform firmware interface is in use) to be obtained. Add a new macro device_for_each_child_node() for iterating over the children of the device description object associated with a given device and a new function device_get_child_node_count() returning the number of a given device's child nodes. The interface covers both ACPI and Device Trees. Suggested-by: Grant Likely <grant.likely@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI: Allow drivers to match using Device Tree compatible propertyMika Westerberg
We have lots of existing Device Tree enabled drivers and allocating separate _HID for each is not feasible. Instead we allocate special _HID "PRP0001" that means that the match should be done using Device Tree compatible property using driver's .of_match_table instead if the driver is missing .acpi_match_table. If there is a need to distinguish from where the device is enumerated (DT/ACPI) driver can check dev->of_node or ACPI_COMPATION(dev). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI: Add support for device specific propertiesMika Westerberg
Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-24Merge tag 'pm+acpi-3.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ...
2014-10-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-21ACPICA: Update version to 20140926.Bob Moore
Version 20140926. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21ACPICA: Events: Reduce source code difference for the ACPI_EVENT_FLAG_HANDLE ↵Lv Zheng
renaming. This patch is partial linuxized result of the following ACPICA commit: ACPICA commit: a73b66c6aa1846d055bb6390d9c9b9902f7d804d Subject: Add "has handler" flag to event/gpe status interfaces. This change adds a new flag, ACPI_EVENT_FLAGS_HAS_HANDLER to the acpi_get_event_status and acpi_get_gpe_status external interfaces. It is set if the event/gpe currently has a handler associated with it. This patch contains the code to rename ACPI_EVENT_FLAG_HANDLE to ACPI_EVENT_FLAG_HAS_HANDLER, and the corresponding updates of its usages. Link: https://github.com/acpica/acpica/commit/a73b66c6 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21ACPICA: Events: Reduce source code difference for the ACPI_EVENT_FLAG_HANDLE ↵Lv Zheng
support. This patch is a partial linuxized result of the following ACPICA commit: ACPICA commit: a73b66c6aa1846d055bb6390d9c9b9902f7d804d Subject: Add "has handler" flag to event/gpe status interfaces. This change adds a new flag, ACPI_EVENT_FLAGS_HAS_HANDLER to the acpi_get_event_status and acpi_get_gpe_status external interfaces. It is set if the event/gpe currently has a handler associated with it. This commit back ports ACPI_EVENT_FLAG_HANDLE from Linux upstream to ACPICA, the flag along with its support code currently can only be found in the Linux upstream and is used by the ACPI sysfs GPE interfaces and the ACPI bus scanning support. Link: https://github.com/acpica/acpica/commit/a73b66c6 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-21ACPICA: Add string for _DDN method name.Bob Moore
The _DDN method will be used internally. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-10ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelantAaron Lu
When we have the acpi_device pointer, there is no need to pass the device's handle to the acpi_bus_xxx_power functions to get/set/update the device's power state, instead, use the acpi_device_xxx_power functions directly. To make this happen for fan module, export acpi_device_update_power. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>