summaryrefslogtreecommitdiff
path: root/include/video
AgeCommit message (Collapse)Author
2015-09-08Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-04Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for the drm for 4.3. Nouveau is probably the biggest amount of changes in here, since it missed 4.2. Highlights below, along with the usual bunch of fixes. All stuff outside drm should have applicable acks. Highlights: - new drivers: freescale dcu kms driver - core: more atomic fixes disable some dri1 interfaces on kms drivers drop fb panic handling, this was just getting more broken, as more locking was required. new core fbdev Kconfig support - instead of each driver enable/disabling it struct_mutex cleanups - panel: more new panels cleanup Kconfig - i915: Skylake support enabled by default legacy modesetting using atomic infrastructure Skylake fixes GEN9 workarounds - amdgpu: Fiji support CGS support for amdgpu Initial GPU scheduler - off by default Lots of bug fixes and optimisations. - radeon: DP fixes misc fixes - amdkfd: Add Carrizo support for amdkfd using amdgpu. - nouveau: long pending cleanup to complete driver, fully bisectable which makes it larger, perfmon work more reclocking improvements maxwell displayport fixes - vmwgfx: new DX device support, supports OpenGL 3.3 screen targets support - mgag200: G200eW support G200e new revision support - msm: dragonboard 410c support, msm8x94 support, msm8x74v1 support yuv format support dma plane support mdp5 rotation initial hdcp - sti: atomic support - exynos: lots of cleanups atomic modesetting/pageflipping support render node support - tegra: tegra210 support (dc, dsi, dp/hdmi) dpms with atomic modesetting support - atmel: support for 3 more atmel SoCs new input formats, PRIME support. - dwhdmi: preparing to add audio support - rockchip: yuv plane support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits) drm/amdgpu: rename gmc_v8_0_init_compute_vmid drm/amdgpu: fix vce3 instance handling drm/amdgpu: remove ib test for the second VCE Ring drm/amdgpu: properly enable VM fault interrupts drm/amdgpu: fix warning in scheduler drm/amdgpu: fix buffer placement under memory pressure drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic drm/amdgpu: fix typo in dce11 watermark setup drm/amdgpu: fix typo in dce10 watermark setup drm/amdgpu: use top down allocation for non-CPU accessible vram drm/amdgpu: be explicit about cpu vram access for driver BOs (v2) drm/amdgpu: set MEC doorbell range for Fiji drm/amdgpu: implement burst NOP for SDMA drm/amdgpu: add insert_nop ring func and default implementation drm/amdgpu: add amdgpu_get_sdma_instance helper function drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES drm/amdgpu: add burst_nop flag for sdma drm/amdgpu: add count field for the SDMA NOP packet v2 drm/amdgpu: use PT for VM sync on unmap drm/amdgpu: make wait_event uninterruptible in push_job ...
2015-08-31drm/exynos: add macro to get the address of START_S regGustavo Padovan
This macro is need to get the value of the START shadow register, that will tell if an framebuffer is currently displayed on the screen or not. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-25drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()Luis R. Rodriguez
Convert the driver from using the x86-specific MTRR code to the architecture-agnostic arch_phys_wc_add(). It will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremapped area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture-specific and on x86 it is being replaced by PAT. c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the ifdeffery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Juergen Gross <jgross@suse.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: mst@redhat.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-4-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-10arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> insteadDan Williams
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt, and ioremap_cache, tree-wide. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.2. I've one other new driver from freescale on my radar, it's been posted and reviewed, I'd just like to get someone to give it a last look, so maybe I'll send it or maybe I'll leave it. There is no major nouveau changes in here, Ben was working on something big, and we agreed it was a bit late, there wasn't anything else he considered urgent to merge. There might be another msm pull for some bits that are waiting on arm-soc, I'll see how we time it. This touches some "of" stuff, acks are in place except for the fixes to the build in various configs,t hat I just applied. Summary: New drivers: - virtio-gpu: KMS only pieces of driver for virtio-gpu in qemu. This is just the first part of this driver, enough to run unaccelerated userspace on. As qemu merges more we'll start adding the 3D features for the virgl 3d work. - amdgpu: a new driver from AMD to driver their newer GPUs. (VI+) It contains a new cleaner userspace API, and is a clean break from radeon moving forward, that AMD are going to concentrate on. It also contains a set of register headers auto generated from AMD internal database. core: - atomic modesetting API completed, enabled by default now. - Add support for mode_id blob to atomic ioctl to complete interface. - bunch of Displayport MST fixes - lots of misc fixes. panel: - new simple panels - fix some long-standing build issues with bridge drivers radeon: - VCE1 support - add a GPU reset counter for userspace - lots of fixes. amdkfd: - H/W debugger support module - static user-mode queues - support killing all the waves when a process terminates - use standard DECLARE_BITMAP i915: - Add Broxton support - S3, rotation support for Skylake - RPS booting tuning - CPT modeset sequence fixes - ns2501 dither support - enable cmd parser on haswell - cdclk handling fixes - gen8 dynamic pte allocation - lots of atomic conversion work exynos: - Add atomic modesetting support - Add iommu support - Consolidate drm driver initialization - and MIC, DECON and MIPI-DSI support for exynos5433 omapdrm: - atomic modesetting support (fixes lots of things in rewrite) tegra: - DP aux transaction fixes - iommu support fix msm: - adreno a306 support - various dsi bits - various 64-bit fixes - NV12MT support rcar-du: - atomic and misc fixes sti: - fix HDMI timing complaince tilcdc: - use drm component API to access tda998x driver - fix module unloading qxl: - stability fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits) drm/nouveau: Pause between setting gpu to D3hot and cutting the power drm/dp/mst: close deadlock in connector destruction. drm: Always enable atomic API drm/vgem: Set unique to "vgem" of: fix a build error to of_graph_get_endpoint_by_regs function drm/dp/mst: take lock around looking up the branch device on hpd irq drm/dp/mst: make sure mst_primary mstb is valid in work function of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/atomic: Don't set crtc_state->enable manually drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver ...
2015-06-22drm/exynos: add Exynos5433 decon driverJoonyoung Shim
DECON(Display and Enhancement Controller) is new IP replacing FIMD in Exynos5433. This patch adds Exynos5433 decon driver. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-03video: fbdev: tdfxfb: use arch_phys_wc_add() and ioremap_wc()Luis R. Rodriguez
This driver uses the same area for MTRR as for the ioremap(). Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Rob Clark <robdclark@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-06-03video: fbdev: neofb: use arch_phys_wc_add() and ioremap_wc()Luis R. Rodriguez
Convert the driver from using the x86 specific MTRR code to the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add() will avoid MTRR if write-combining is available, in order to take advantage of that also ensure the ioremap'd area is requested as write-combining. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") The conversion done is expressed by the following Coccinelle SmPL patch, it additionally required manual intervention to address all the #ifdery and removal of redundant things which arch_phys_wc_add() already addresses such as verbose message about when MTRR fails and doing nothing when we didn't get an MTRR. @ mtrr_found @ expression index, base, size; @@ -index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1); +index = arch_phys_wc_add(base, size); @ mtrr_rm depends on mtrr_found @ expression mtrr_found.index, mtrr_found.base, mtrr_found.size; @@ -mtrr_del(index, base, size); +arch_phys_wc_del(index); @ mtrr_rm_zero_arg depends on mtrr_found @ expression mtrr_found.index; @@ -mtrr_del(index, 0, 0); +arch_phys_wc_del(index); @ mtrr_rm_fb_info depends on mtrr_found @ struct fb_info *info; expression mtrr_found.index; @@ -mtrr_del(index, info->fix.smem_start, info->fix.smem_len); +arch_phys_wc_del(index); @ ioremap_replace_nocache depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap_nocache(base, size); +info->screen_base = ioremap_wc(base, size); @ ioremap_replace_default depends on mtrr_found @ struct fb_info *info; expression base, size; @@ -info->screen_base = ioremap(base, size); +info->screen_base = ioremap_wc(base, size); Generated-by: Coccinelle SmPL Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-04-20Merge tag 'fbdev-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Small fixes and improvements to various fbdev drivers" * tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (24 commits) omapdss: extend pm notifier to handle hibernation OMAPDSS: Correct video ports description file path in DT binding doc OMAPDSS: disable VT switch fbdev: sh_mobile_lcdc: Fix destruction of uninitialized mutex video: fbdev: sh_mobile_lcdcfb: Fix ROP3 sysfs attribute parsing fbdev: pm3fb: cleanup some confusing indenting hyperv: hyperv_fb: match wait_for_completion_timeout return type video: fbdev: use msecs_to_jiffies for time conversions fbdev: via/via_clock: fix sparse warning video: fbdev: make of_device_id array const fbdev: sm501fb: use memset_io OMAPDSS: workaround for MFLAG + NV12 issue OMAPDSS: Add support for MFLAG OMAPDSS: setup default fifo thresholds OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG OMAPDSS: DISPC: fix div by zero issue in overlay scaling OMAPDSS: DISPC: change sync_pclk_edge default value OMAPDSS: change signal_level & signal_edge enum values OMAPDSS: DISPC: explicit handling for sync and de levels OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES ...
2015-04-13Merge tag 'imx-drm-next-2015-03-31' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm changes to use media bus formats and LDB drm_panel support - Add media bus formats needed by imx-drm - Switch to use media bus formats to describe the pixel format on the internal parallel bus between display interface and encoders - Some preparations for TV Output via TVEv2 on i.MX5 - Add drm_panel support to the i.MX LVDS driver, allow to determine the bus pixel format from the panel descriptor. * tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux: drm/imx: imx-ldb: allow to determine bus format from the connected panel drm/imx: imx-ldb: reset display clock input when disabling LVDS drm/imx: imx-ldb: add drm_panel support drm/imx: consolidate bus format variable names drm/imx: switch to use media bus formats Add RGB666_1X24_CPADHI media bus format Add YUV8_1X24 media bus format Add BGR888_1X24 and GBR888_1X24 media bus formats Add LVDS RGB media bus formats Add RGB444_1X12 and RGB565_1X16 media bus formats drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2 drm/imx: Add support for interlaced scanout
2015-04-13drm/exynos: Enable DP clock to fix display on Exynos5250 and otherKrzysztof Kozlowski
After adding display power domain for Exynos5250 in commit 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") the display on Chromebook Snow and others stopped working after boot. The reason for this suggested Andrzej Hajda: the DP clock was disabled. This clock is required by Display Port and is enabled by bootloader. However when FIMD driver probing was deferred, the display power domain was turned off. This effectively reset the value of DP clock enable register. When exynos-dp is later probed, the clock is not enabled and display is not properly configured: exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok exynos-dp 145b0000.dp-controller: unable to config video Fixes: 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: fimd: fix alpha setting for XR24 pixel formatGustavo Padovan
XR24 planes were not shown properly, so now set the right registers to correctly enable displaying these planes. It also moves the alpha register settings to fimd_win_set_pixfmt() to keep all pixel format stuff together. v2: remove leftover var alpha Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-31drm/imx: consolidate bus format variable namesPhilipp Zabel
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt, and pixfmt variables to a common name "bus_format" wherever they describe the pixel format on the bus between display controller and encoder hardware. At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-02-26OMAPDSS: change signal_level & signal_edge enum valuesTomi Valkeinen
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW. The previous patch removed this dependency. Swap the enum values the other way around. This doesn't change the behavior in any way, but makes it easier to debug as value of '1' means HIGH or RISING. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGESTomi Valkeinen
DISPC can drive data lines either on rising or falling pixel clock edge, which can be configured by the user. Sync lines can also be driven on rising or falling pixel clock edge, but additionally the HW can be configured to drive the sync lines on opposite clock edge from the data lines. This opposite edge setting does not make any sense, as the same effect can be achieved by just setting the sync lines to be driven on the other edge compared to the data lines. It feels like some kind of backward compatibility option, even if all DSS versions seem to have the same implementation. To simplify the code and configuration of the signals, and to make the dispc timings more compatible with what is used on other platforms, let's just remove the whole opposite-edge support. The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are changed so that they use the opposite setting from the data edge. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26OMAPDSS: fix regression with display sysfs filesTomi Valkeinen
omapdss's sysfs directories for displays used to have 'name' file, giving the name for the display. This file was later renamed to 'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like at least xserver-xorg-video-omap3 requires the 'name' file to be present. To fix the regression, this patch creates new kobjects for each display, allowing us to create sysfs directories for the displays. This way we have the whole directory for omapdss, and there will be no sysfs file clashes with the underlying display device's sysfs files. We can thus add the 'name' sysfs file back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NeilBrown <neilb@suse.de>
2015-02-16Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull, it has a shared branch with some alsa crossover but everything should be acked by relevant people. New drivers: - ATMEL HLCDC driver - designware HDMI core support (used in multiple SoCs). core: - lots more atomic modesetting work, properties and atomic ioctl (hidden under option) - bridge rework allows support for Samsung exynos chromebooks to work finally. - some more panels supported i915: - atomic plane update support - DSI uses shared DSI infrastructure - Skylake basic support is all merged now - component framework used for i915/snd-hda interactions - write-combine cpu memory mappings - engine init code refactored - full ppgtt enabled where execlists are enabled. - cherryview rps/gpu turbo and pipe CRC support. radeon: - indirect draw support for evergreen/cayman - SMC and manual fan control for SI/CI - Displayport audio support amdkfd: - SDMA usermode queue support - replace suballocator usage with more suitable one - rework for allowing interfacing to more than radeon nouveau: - major renaming in prep for later splitting work - merge arm platform driver into nouveau - GK20A reclocking support msm: - conversion to atomic modesetting - YUV support for mdp4/5 - eDP support - hw cursor for mdp5 tegra: - conversion to atomic modesetting - better suspend/resume support for child devices rcar-du: - interlaced support imx: - move to using dw_hdmi shared support - mode_fixup support sti: - DVO support - HDMI infoframe support exynos: - refactoring and cleanup, removed lots of internal unnecessary abstraction - exynos7 DECON display controller support Along with the usual bunch of fixes, cleanups etc" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits) drm/radeon: fix voltage setup on hawaii drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary drm/radeon: only enable kv/kb dpm interrupts once v3 drm/radeon: workaround for CP HW bug on CIK drm/radeon: Don't try to enable write-combining without PAT drm/radeon: use 0-255 rather than 0-100 for pwm fan range drm/i915: Clamp efficient frequency to valid range drm/i915: Really ignore long HPD pulses on eDP drm/exynos: Add DECON driver drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL drm/i915: Insert a command barrier on BLT/BSD cache flushes drm/i915: Drop vblank wait from intel_dp_link_down drm/exynos: fix NULL pointer reference drm/exynos: remove exynos_plane_dpms drm/exynos: remove mode property of exynos crtc drm/exynos: Remove exynos_plane_dpms() call with no effect drm/i915: Squelch overzealous uncore reset WARN_ON drm/i915: Take runtime pm reference on hangcheck_info drm/i915: Correct the IOSF Dev_FN field for IOSF transfers drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage ...
2015-02-11drm/exynos: Add DECON driverAjay Kumar
This patch is based on exynos-drm-next branch of Inki Dae's tree at: git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git DECON(Display and Enhancement Controller) is the new IP in exynos7 SOC for generating video signals using pixel data. DECON driver can be used to drive 2 different interfaces on Exynos7: DECON-INT(video controller) and DECON-EXT(Mixer for HDMI) The existing FIMD driver code was used as a template to create DECON driver. Only DECON-INT is supported as of now, and DECON-EXT support will be added later. The current version of the driver supports video mode displays. Changelog v2: - Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON. Signed-off-by: Akshu Agrawal <akshua@gmail.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-04OMAPDSS: add define for DRA7xx HW versionTomi Valkeinen
Add define for DRA7xx DSS version. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-07gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfgSteve Longerbeam
This patch changes struct ipu_di_signal_cfg to use struct videomode to define video timings and flags. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07gpu: ipu-di: Add ipu_di_adjust_videomode()Jiada Wang
On some monitors, high resolution modes are not working, exhibiting pixel column truncation problems (for example, 1280x1024 displays as 1280x1022). The function ipu_di_adjust_videomode() aims to fix these issues by adjusting a passed videomode to IPU restrictions. The function can be called from the drm_crtc_helper_funcs->mode_fixup() methods. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Deepak Das <deepak_das@mentor.com> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-01OMAPDSS: Remove all references to obsolete HDMI audio callbacksJyri Sarha
In new model these callbacks are obsolete since the ASoC component drivers are integrated into the HDMI drivers and no callbacks are needed anymore. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-11-12OMAPDSS: DT: Get source endpoint by matching reg-idArchit Taneja
In omapdss_of_find_source_for_first_ep, we retrieve a source endpoint's DT node, and then see what omapdss output has the matching device_node pointer in omap_dss_find_output_by_node. For all DPI and SDI outputs, the device_node pointer is set as the parent's DSS device_node pointer. If the source is one of these outputs, the above method won't work. To get the correct output for ports within DSS(and in other cases in the future, where multiple ports might be under one device), we require additional information which is exclusive to the output port. We create a new field in omap_dss_device called 'port_num', this provides port number of the output port corresponding to this device. When searching for the source endpoint in DT, we extract the 'reg' property from the port corresponding to the endpoint source. From the list of registered outputs, we pick out that output which has both dev->of_node and port_num matching with the device_node pointer and 'reg' of the source endpoint node from DT. For encoder blocks(the ones which have both an input and output port), we need to set the port_num as the 'reg' property for the output port as defined in the DT bindings. We set port_num to 1 in the tfp410 and tpd12s015 encoder drivers. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-10-18Merge tag 'fbdev-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - new 6x10 font - various small fixes and cleanups * tag 'fbdev-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (30 commits) fonts: Add 6x10 font videomode: provide dummy inline functions for !CONFIG_OF video/atmel_lcdfb: Introduce regulator support fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume framebuffer: fix screen corruption when copying framebuffer: fix border color arm, fbdev, omap2, LLVMLinux: Remove nested function from omapfb arm, fbdev, omap2, LLVMLinux: Remove nested function from omap2 dss video: fbdev: valkyriefb.c: use container_of to resolve fb_info_valkyrie from fb_info video: fbdev: pxafb.c: use container_of to resolve pxafb_info/layer from fb_info video: fbdev: cyber2000fb.c: use container_of to resolve cfb_info from fb_info video: fbdev: controlfb.c: use container_of to resolve fb_info_control from fb_info video: fbdev: sa1100fb.c: use container_of to resolve sa1100fb_info from fb_info video: fbdev: stifb.c: use container_of to resolve stifb_info from fb_info video: fbdev: sis: sis_main.c: Cleaning up missing null-terminate in conjunction with strncpy video: valkyriefb: Fix unused variable warning in set_valkyrie_clock() video: fbdev: use %*ph specifier to dump small buffers video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT video: fbdev: au1200fb: delete double assignment video: fbdev: sis: delete double assignment ...
2014-10-07videomode: provide dummy inline functions for !CONFIG_OFTomi Valkeinen
If CONFIG_OF is disabled but we build any driver that tries to use of_get_display_timing, we get this link error: ERROR: "of_get_display_timing" [drivers/gpu/drm/rcar-du/rcar-du-drm.ko] undefined! This adds an empty inline function as an alternative, to avoid changing each driver using this function when we want to build them without CONFIG_OF. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-02gpu: ipu-v3: Add ipu_dump()Steve Longerbeam
Adds ipu_dump() which dumps IPU register state to debug. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_dump()Steve Longerbeam
Adds ipu_cpmem_dump() which dumps a channel's cpmem to debug. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add second buffer support to ipu_cpmem_set_image()Steve Longerbeam
Add a second buffer physaddr to struct ipu_image, for double-buffering support. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_rotation()Steve Longerbeam
Adds ipu_cpmem_set_rotation(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_axi_id()Steve Longerbeam
Adds ipu_cpmem_set_axi_id() to set which AXI bus master the channel will use to transfer data onto AXI bus. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_block_mode()Steve Longerbeam
Adds ipu_cpmem_set_block_mode(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_lock_enable()Steve Longerbeam
Adds ipu_idmac_lock_enable(), which enables or disables channel burst locking. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_enable_watermark()Steve Longerbeam
Adds the function ipu_idmac_enable_watermark(), which enables or disables watermarking in the IDMAC channel. Enabling watermarking can increase a channel's AXI bus arbitration priority. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_stride_to_bytes()Steve Longerbeam
Adds ipu_stride_to_bytes(), which converts a pixel stride to bytes, suitable for passing to cpmem. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_clear_buffer()Steve Longerbeam
Add the reverse of ipu_idmac_select_buffer(), that is, clear a buffer ready status in a channel. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_buffer_is_ready()Steve Longerbeam
Add ipu_idmac_buffer_is_ready(), returns true if the given buffer in the given channel is set ready (owned by IPU), or false if not ready (owned by CPU core). Support has been added for third buffer, there is no support yet for triple-buffering in idmac channels, but this function checks buffer-ready for third buffer in case this support is added later. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Move IDMAC channel names to imx-ipu-v3.hSteve Longerbeam
Move the IDMAC channel names to imx-ipu-v3.h, to make the names available outside IPU. Add a couple new channels in the process (async display BG/FG, channels 24 and 29). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add helper function checking if pixfmt is planarSteve Longerbeam
Add simple helper function returning true if passed pixel format is one of supported planar ones. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add rotation mode conversion utilitiesSteve Longerbeam
Add two functions: - ipu_degrees_to_rot_mode(): converts a degrees, hflip, and vflip setting to an IPU rotation mode. - ipu_rot_mode_to_degrees(): converts an IPU rotation mode with given hflip and vflip settings to degrees. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_mbus_code_to_colorspace()Steve Longerbeam
Add ipu_mbus_code_to_colorspace() to find ipu_color_space from a media bus pixel format code. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: smfc: Add ipu_smfc_set_watermark()Steve Longerbeam
Adds ipu_smfc_set_watermark() which programs a channel's SMFC FIFO levels at which the watermark signal is set and cleared. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: smfc: Convert to per-channelSteve Longerbeam
Convert the smfc object to be specific to a single smfc channel. Add ipu_smfc_{get|put} to retrieve and release a single smfc channel for exclusive use, and add use counter to ipu_smfc_{enable|disable}. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add Image Converter unitSteve Longerbeam
Adds the Image Converter (IC) unit. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Condensed the three CSC setup functions into a single one that uses static tables to set up the CSC task parameters. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add Camera Sensor Interface unitSteve Longerbeam
Adds the Camera Sensor Interface (CSI) unit required for video capture. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Removed the unused clk_get_rate in ipu_csi_init_interface and the ipu_csi_ccir_err_detection_enable/disable functions. Checkpatch cleanup. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-18gpu: ipu-v3: Add functions to set CSI/IC source muxesSteve Longerbeam
Adds two new functions, ipu_set_csi_src_mux() and ipu_set_ic_src_mux(), that select the inputs to the CSI and IC respectively. Both muxes are programmed in the IPU_CONF register. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-18gpu: ipu-v3: Add ipu-cpmem unitSteve Longerbeam
Move channel parameter memory setup functions and macros into a new submodule ipu-cpmem. In the process, cleanup arguments to the functions to take a channel pointer instead of a pointer into cpmem for that channel. That allows the structure of the parameter memory to be private to ipu-cpmem.c. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-08Merge tag 'fbdev-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - much better HDMI infoframe support for OMAP - Cirrus Logic CLPS711X framebuffer driver - DT support for PL11x CLCD driver - various small fixes * tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: DSI: fix depopulating dsi peripherals video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic video: ARM CLCD: Fix DT-related build problems drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM. video: ARM CLCD: Add DT support drm/omap: Add infoframe & dvi/hdmi mode support OMAPDSS: HDMI: remove the unused code OMAPDSS: HDMI5: add support to set infoframe & HDMI mode OMAPDSS: HDMI4: add support to set infoframe & HDMI mode OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015 OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver OMAPDSS: HDMI: remove custom avi infoframe OMAPDSS: HDMI5: use common AVI infoframe support OMAPDSS: HDMI4: use common AVI infoframe support OMAPDSS: Kconfig: select HDMI OMAPDSS: HDMI: fix name conflict OMAPDSS: DISPC: clean up dispc_mgr_timings_ok OMAPDSS: DISPC: reject interlace for lcd out OMAPDSS: DISPC: fix debugfs reg dump ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-03drm/exynos: fimd: support LCD I80 interfaceYoungJun Cho
To support MIPI command mode based I80 interface panel, FIMD should do followings: - Sets LCD I80 interface timings configuration. - Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration. - Sets LCD block configuration for I80 interface. - Sets ideal(pixel) clock is 2 times faster than the original one to generate frame done IRQ prior to the next TE signal. - Implements trigger feature that transfers image data if there is page flip request, and implements TE handler to call trigger function. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>