summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2007-10-13i2c: Rename the PEC functionality bitDavid Brownell
Rename I2C_FUNC_SMBUS_HWPEC_CALC as I2C_FUNC_SMBUS_PEC, and list that functionality as always available through the software implementation. Update documentation accordingly (and list similar requirements). The way it's currently packaged doesn't present the capability in a useful way. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: Move i2c-dev interfaces to i2c-dev.hDavid Brownell
Move the i2c-dev support into <linux/i2c-dev.h> where it should always have lived. Now <linux/i2c.h> no longer holds stuff related to the optional userspace /dev/i2c-X interface. Improve the descriptions for these ioctl requests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: Remove i2c_algorithm.algo_control()David Brownell
This removes: - An effectively unused hook: i2c_algorithm.algo_control. - The i2c_control() call, used only by i2c-dev to call that unused hook or set two barely supported adapter params. (That param setting moves into i2c-dev.c ... still iffy due to lack of locking, but no other changes.) As shown by diffstat, this is a net code shrink. It also reduces the complexity of the I2C adapter and /dev interfaces. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: Document struct i2c_msgDavid Brownell
Clarify use of the I2C_M_* flags by highlighting the fact that most of them depend on I2C_FUNC_PROTOCOL_MANGLING. Also provide kerneldoc for i2c_smbus_read_block_data() and also for "struct i2c_msg". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: Add DaVinci I2C controller supportVladimir Barinov
Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Acked-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c-core: Make some code staticAdrian Bunk
After the i2c-isa removal some code can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: New-style devices can support driver model wakeup flagsDavid Brownell
We need to be able to flag I2C devices, such as RTCs, which can issue wake events (usually through IRQ lines). This adds an i2c_board_info.flags bit, and uses it to initialize the i2c device node. (And shrinks a few lines that were overly long.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13i2c: Kill struct i2c_device_idJean Delvare
I2C devices do not have any form of ID as PCI or USB devices have. No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't make sense. So we can get rid of struct i2c_device_id and the associated support code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com>
2007-10-13Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SMP: Fix use of cpumasks. [MIPS] Revert "[MIPS] tlbex.c: Cleanup __init usage." [MIPS] CFE: Add missing parenthesis.
2007-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits) alim15x3: remove redundant m5229_revision check sc1200: fix ->dma_base equal zero handling cs5520: fix ->dma_base equal zero handling sgiioc4: add missing ->dma_base check cs5535: add missing ->dma_base check ide: remove CONFIG_IDEDMA_IVB config option ide: change master/slave IDENTIFY order ide: move ide_config_drive_speed() calls to upper layers (take 2) pdc202xx_new: check ide_config_drive_speed() return value cs5535: check ide_config_drive_speed() return value amd74xx/via82cxxx: check ide_config_drive_speed() return value au1xxx: fix au1xxx_set_pio_mode() icside: use ide_tune_dma() ide-pmac: fix PIO setup and enable autotune ide-pmac: use ide_tune_dma() (take 2) ide-pmac: remove pmac_ide_do_setfeature() (take 2) ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature() ide-pmac: use __ide_wait_stat() ide-pmac: remove extra good status wait from pmac_ide_do_setfeature() ide: add __ide_wait_stat() helper ...
2007-10-13Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (91 commits) [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug [MTD] [NAND] Fix compiler warning in Alauda driver [JFFS2] Remove stray debugging printk [JFFS2] Handle dirents on the flash with embedded zero bytes in names. [JFFS2] Check for creation of dirents with embedded zero bytes in name. [JFFS2] Don't count all 'very dirty' blocks except in debug mode [JFFS2] Check whether garbage-collection actually obsoleted its victim. [JFFS2] Relax threshold for triggering GC due to dirty blocks. [MTD] [OneNAND] Fix typo related with recent commit [JFFS2] Trigger garbage collection when very_dirty_list size becomes excessive [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first. [MTD] [NAND] Resume method for CAFÉ NAND controller [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller. [MTD] [NAND] s3c2410: fix arch moves [MTD] [OneNAND] fix numerous races [MTD] map driver for NOR flash on the Intel Vermilion Range chipset [JFFS2] Fix unpoint length [MTD] fix CFI point method for discontiguous maps [MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver ...
2007-10-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (106 commits) KVM: Replace enum by #define KVM: Skip pio instruction when it is emulated, not executed KVM: x86 emulator: popf KVM: x86 emulator: fix src, dst value initialization KVM: x86 emulator: jmp abs KVM: x86 emulator: lea KVM: X86 emulator: jump conditional short KVM: x86 emulator: imlpement jump conditional relative KVM: x86 emulator: sort opcodes into ascending order KVM: Improve emulation failure reporting KVM: x86 emulator: pushf KVM: x86 emulator: call near KVM: x86 emulator: push imm8 KVM: VMX: Fix exit qualification width on i386 KVM: Move main vcpu loop into subarch independent code KVM: VMX: Move vm entry failure handling to the exit handler KVM: MMU: Don't do GFP_NOWAIT allocations KVM: Rename kvm_arch_ops to kvm_x86_ops KVM: Simplify memory allocation KVM: Hoist SVM's get_cs_db_l_bits into core code. ...
2007-10-13fix sparc32 breakage (result of vmlinux.lds.S bug)Al Viro
In commit 4665079cbb2a3e17de82f2ab2940b9f97f37d65e ("[NETNS]: Move some code into __init section when CONFIG_NET_NS=n") we got a new section - .exit.text.refok (more of 'let's tell modpost that some bogus calls are not bogus', a-la text.init.refok). Unfortunately, the commit in question forgot to add it to TEXT_TEXT, with rather amusing results. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13v4l: copy_to_user() is not a good method nameAl Viro
Breaks on any target that has copy_to_user() defined as a non-trivial macro. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13minimal build fixes for uml (fallout from x86 merge)Al Viro
a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now b) arch/{i386,x86_64}/crypto are merged now c) subarch-obj needed changes d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h> since it can be included from asm-um/cpufeature.h e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not for Kconfig f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one should be registered from corresponding arch/*/kernel/*, with ifdef going away; that's a separate patch, though). With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix") we have uml allmodconfig building both on i386 and amd64. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13net core: fix kernel-doc for new function parametersRandy Dunlap
Fix networking code kernel-doc for newly added parameters. Warning(linux-2.6.23-git2//net/core/sock.c:879): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:570): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:594): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:617): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:641): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:667): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:722): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:959): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:1195): No description found for parameter 'dev' Warning(linux-2.6.23-git2//net/core/dev.c:2105): No description found for parameter 'n' Warning(linux-2.6.23-git2//net/core/dev.c:3272): No description found for parameter 'net' Warning(linux-2.6.23-git2//net/core/dev.c:3445): No description found for parameter 'net' Warning(linux-2.6.23-git2//include/linux/netdevice.h:1301): No description found for parameter 'cpu' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: mach-cayman: Build fixes. sh64: Symbol export fixups. sh64: linker script tidying and alignment fixups. sh64: Set KBUILD_IMAGE to make the rpm target happy. sh64: Kill off obsolete linux/blk.h reference. sh64: cleanup struct irqaction initializers. sh64: Kill off dead gdb stub symbol. sh64: alphanumeric display only on Cayman. sh64: Add defconfigs for mach-sim and mach-harp. sh64: update cayman defconfig. sh64: Tidy up Kconfig dependencies. sh64: Move consistent DMA routines to arch/sh64/mm/. sh64: Some symbol exports and build fixes. sh64: mach-sim: Build fixes. sh64: mach-harp: Build fixes. sh64: Kill off duplicate frame pointer option. sh64: Kill off dead ROM-RAM and generic boards. sh64: Tidy up includes for Cayman board. sh64: Move *_p() I/O routine variants to io.h.
2007-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits) sh: allow building for both r2d boards in same binary. sh: fix r2d board detection sh: Discard .exit.text/.exit.data at runtime. sh: Fix up some section alignments in linker script. sh: Fix SH-4 DMAC CHCR masking. sh: Rip out left-over nommu cond syscall cruft. sh: Make kgdb i-cache flushing less inept. sh: kgdb section mismatches and tidying. sh: cleanup struct irqaction initializers. sh: early_printk tidying. video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver. sh: Conditionalize gUSA support. sh: Follow gUSA preempt changes in __switch_to(). sh: Tidy up gUSA preempt handling. sh: __copy_user() optimizations for small copies. sh: clkfwk: Support multi-level clock propagation. sh: Fix URAM start address on SH7785. sh: Use boot_cpu_data for CPU probe. sh: Support extended mode TLB on SH-X3. sh: Bump MAX_ACTIVE_REGIONS for SH7785. ...
2007-10-13m68k: Export cachectl.hMatthew Wilcox
libffi in GCC 4.2 needs cachectl.h to do its cache flushing. But we don't currently export it. I believe this patch should do the trick. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13m68k: ignore restart_syscallGeert Uytterhoeven
m68k: ignore restart_syscall, which is not needed on m68k. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13icside: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove pmac_ide_do_setfeature() (take 2)Bartlomiej Zolnierkiewicz
Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: use __ide_wait_stat()Bartlomiej Zolnierkiewicz
* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature(). While at it do following changes to match __ide_wait_stat() call in ide_config_drive_speed(): * Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT. * Check DRQ_STAT bit (shouldn't be set for good device status). Also remove no longer needed wait_for_ready() from ide-iops.c. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: add __ide_wait_stat() helperBartlomiej Zolnierkiewicz
* Split off checking of the status register from ide_wait_stat() to __ide_wait_stat() helper. * Use the new helper in ide_config_drive_speed(). The only change in the functionality is that the function now fails if after 20 sec (WAIT_CMD) device is still busy (BUSY_STAT bit is set) while previously instead of failing the function continued with checking for the correct device status (which would give the device additional 10 usec to clear BUSY_STAT bit). * Remove stale comment for ide_config_drive_speed(). * Remove duplicate comment for ide_wait_stat() from <linux/ide.h>. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2007-10-13Merge Linux 2.6.23David Woodhouse
2007-10-13[MTD] [NAND] Blackfin on-chip NAND Flash Controller driverBryan Wu
This is the driver for latest Blackfin on-chip nand flash controller - use nand_chip and mtd_info common nand driver interface - provide both PIO and dma operation - compiled with ezkit bf548 configuration - use hardware 1-bit ECC - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs ChangeLog from try#1 - use hweight32() instead of count_bits() - replace bf54x with bf5xx and BF54X with BF5XX - compare against plat->page_size in 2 cases when enable hardware ECC ChangeLog from try#2 - passed nand_test suites - use cpu_relax() instead of busy wait loop - some coding style issue pointed out by Andrew Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13[MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bugKevin Hao
When we press ctrl-alt-del,kernel_restart_prepare will invoke cfi_intelext_reboot which will set flash to read array mode, but later when device_shutdown is invoked which may put current work queue to sleep and other process may be scheduled to running and programming flash in not FL_READY mode again. So we can't boot up if this flash is used for bootloader. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13KVM: Replace enum by #defineAvi Kivity
Easier for existence test (#ifdef) in userspace. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: in-kernel LAPIC save and restore supportEddie Dong
This patch adds a new vcpu-based IOCTL to save and restore the local apic registers for a single vcpu. The kernel only copies the apic page as a whole, extraction of registers is left to userspace side. On restore, the APIC timer is restarted from the initial count, this introduces a little delay, but works fine. Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: in-kernel IOAPIC save and restore supportHe, Qing
This patch adds support for in-kernel ioapic save and restore (to and from userspace). It uses the same get/set_irqchip ioctl as in-kernel PIC. Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Add get/set irqchip ioctls for in-kernel PIC live migration supportHe, Qing
This patch adds two new ioctls to dump and write kernel irqchips for save/restore and live migration. PIC s/r and l/m is implemented in this patch. Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Emulate hlt in the kernelEddie Dong
By sleeping in the kernel when hlt is executed, we simplify the in-kernel guest interrupt path considerably. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Emulate local APIC in kernelEddie Dong
Because lightweight exits (exits which don't involve userspace) are many times faster than heavyweight exits, it makes sense to emulate high usage devices in the kernel. The local APIC is one such device, especially for Windows and for SMP, so we add an APIC model to kvm. It also allows in-kernel host-side drivers to inject interrupts without going through userspace. [compile fix on i386 from Jindrich Makovicka] Signed-off-by: Yaozu (Eddie) Dong <Eddie.Dong@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Add support for in-kernel PIC emulationEddie Dong
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Communicate cr8 changes to userspaceYang, Sheng
This allows running 64-bit Windows. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: add hypercall nr to kvm_runJeff Dike
Add the hypercall number to kvm_run and initialize it. This changes the ABI, but as this particular ABI was unusable before this no users are affected. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Use standard CR8 flags, and fix TPR definitionRusty Russell
Intel manual (and KVM definition) say the TPR is 4 bits wide. Also fix CR8_RESEVED_BITS typo. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Trivial: Use standard BITMAP macros, open-code userspace-exposed headerRusty Russell
Creating one's own BITMAP macro seems suboptimal: if we use manual arithmetic in the one place exposed to userspace, we can use standard macros elsewhere. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Trivial: /dev/kvm interface is no longer experimental.Rusty Russell
KVM interface is no longer experimental. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Future-proof the exit information union ABIAvi Kivity
Note that as the size of struct kvm_run is not part of the ABI, we can add things at the end. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13i386: Expose IOAPIC register definitions even if CONFIG_X86_IO_APIC is not setAvi Kivity
KVM reuses the IOAPIC register definitions, and needs them even if the host is not compiled with IOAPIC support. Move the #ifdef below so that only the IOAPIC variables and functions are protected, and the register definitions are available to all. Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-12x86: optimise barriersNick Piggin
According to latest memory ordering specification documents from Intel and AMD, both manufacturers are committed to in-order loads from cacheable memory for the x86 architecture. Hence, smp_rmb() may be a simple barrier. Also according to those documents, and according to existing practice in Linux (eg. spin_unlock doesn't enforce ordering), stores to cacheable memory are visible in program order too. Special string stores are safe -- their constituent stores may be out of order, but they must complete in order WRT surrounding stores. Nontemporal stores to WB memory can go out of order, and so they should be fenced explicitly to make them appear in-order WRT other stores. Hence, smp_wmb() may be a simple barrier. http://developer.intel.com/products/processor/manuals/318147.pdf http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24593.pdf In userspace microbenchmarks on a core2 system, fence instructions range anywhere from around 15 cycles to 50, which may not be totally insignificant in performance critical paths (code size will go down too). However the primary motivation for this is to have the canonical barrier implementation for x86 architecture. smp_rmb on buggy pentium pros remains a locked op, which is apparently required. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12x86: fix IO write barrierNick Piggin
wmb() on x86 must always include a barrier, because stores can go out of order in many cases when dealing with devices (eg. WC memory). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13[MIPS] CFE: Add missing parenthesis.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-12Merge branch 'upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits) [libata] struct pci_dev related cleanups libata: use ata_exec_internal() for PMP register access libata: implement ATA_PFLAG_RESETTING libata: add @timeout to ata_exec_internal[_sg]() ahci: fix notification handling ahci: clean up PORT_IRQ_BAD_PMP enabling ahci: kill leftover from enabling NCQ over PMP libata: wrap schedule_timeout_uninterruptible() in loop libata: skip suppress reporting if ATA_EHI_QUIET libata: clear ehi description after initial host report pata_jmicron: match vendor and class code only libata: add ST9160821AS / 3.ALD to NCQ blacklist pata_acpi: ACPI driver support libata-core: Expose gtm methods for driver use libata: add HDT722516DLA380 to NCQ blacklist libata: blacklist NCQ on Seagate Barracuda ST380817AS [libata] Turn on ACPI by default libata_scsi: Fix ATAPI transfer lengths libata: correct handling of SRST reset sequences libata: Integrate ACPI-based PATA/SATA hotplug - version 5 ...
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: fix race in autosuspend reschedule atmel_usba_udc: Keep track of the device status USB: Nikon D40X unusual_devs entry USB: serial core should respect driver requirements USB: documentation for USB power management USB: skip autosuspended devices during system resume USB: mutual exclusion for EHCI init and port resets USB: allow usbstorage to have LUNS greater than 2Tb USB: Adding support for SHARP WS011SH to ipaq.c USB: add atmel_usba_udc driver USB: ohci SSB bus glue USB: ehci build fixes on au1xxx, ppc-soc USB: add runtime frame_no quirk for big-endian OHCI USB: funsoft: Fix termios USB: visor: termios bits USB: unusual_devs entry for Nikon DSC D2Xs USB: re-remove <linux/usb_sl811.h> USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h> USB: Export URB statistics for powertop USB: serial gadget: Disable endpoints on unload ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 21:37:23 +0000