summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-01-29[MIPS] Put cast inside macro instead of all the callersAndrew Sharp
Since all the callers of the PHYS_TO_XKPHYS macro call with a constant, put the cast to LL inside the macro where it really should be rather than in all the callers. This makes macros like PHYS_TO_XKSEG_UNCACHED work without gcc whining. Signed-off-by: Andrew Sharp <andy.sharp@onstor.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] remove unused mips_machtypeYoichi Yuasa
Removed unused mips_machtype. These are only set but not used. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] CFE: Make code remotely resemble Linux code.Christoph Hellwig
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] R4000/R4400 daddiu erratum workaroundMaciej W. Rozycki
This complements the generic R4000/R4400 errata workaround code and adds bits for the daddiu problem. In most places it just modifies handwritten assembly code so that the assembler is allowed to use a temporary register as daddiu may now be treated as a macro that expands to a sequence of li and daddu. It is the AT register or, where AT is unavailable or used explicitly for another purpose, an explicitly-named register is selected, using the .set at=<reg> feature added recently to gas. This feature is only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the workaround remains disabled, the required version of binutils stays unchanged. Similarly, daddiu instructions put in branch delay slots in noreorder fragments are now taken out of them and the assembler is allowed to reorder them itself as possible (which it does making the whole idea of scheduling them into delay slots manually questionable). Also in the very few places where such a simple conversion was not possible, a handcoded longer sequence is implemented. Other than that there are changes to code responsible for building the TLB fault and page clear/copy handlers to avoid daddiu as appropriate. These are only effective if the erratum is verified to be present at the run time. Finally there is a trivial update to __delay(), because it uses daddiu in a branch delay slot. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29[MIPS] R4000/R4400 errata workaroundsMaciej W. Rozycki
This is the gereric part of R4000/R4400 errata workarounds. They include compiler and assembler support as well as some source code modifications to address the problems with some combinations of multiply/divide+shift instructions as well as the daddi and daddiu instructions. Changes included are as follows: 1. New Kconfig options to select workarounds by platforms as necessary. 2. Arch top-level Makefile to pass necessary options to the compiler; also incompatible configurations are detected (-mno-sym32 unsupported as horribly intrusive for little gain). 3. Bug detection updated and shuffled -- the multiply/divide+shift problem is lethal enough that if not worked around it makes the kernel crash in time_init() because of a division by zero; the daddiu erratum might also trigger early potentially, though I have not observed it. On the other hand the daddi detection code requires the exception subsystem to have been initialised (and is there mainly for information). 4. r4k_daddiu_bug() added so that the existence of the erratum can be queried by code at the run time as necessary; useful for generated code like TLB fault and copy/clear page handlers. 5. __udelay() updated as it uses multiplication in inline assembly. Note that -mdaddi requires modified toolchain (which has been maintained by myself and available from my site for ~4years now -- versions covered are GCC 2.95.4 - 4.1.2 and binutils from 2.13 onwards). The -mfix-r4000 and -mfix-r4400 have been standard for a while though. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (197 commits) sh: add spi header and r2d platform data V3 sh: update r7780rp interrupt code sh: remove consistent alloc stuff from the machine vector sh: use declared coherent memory for dreamcast pci ethernet adapter sh: declared coherent memory support V2 sh: Add support for SDK7780 board. sh: constify function pointer tables sh: Kill off -traditional for linker script. cdrom: Add support for Sega Dreamcast GD-ROM. sh: Kill off hs7751rvoip reference from arch/sh/Kconfig. sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default. sh: Kill off dead HS771RVoIP board support. sh: r7785rp: Fix up DECLARE_INTC_DESC() arg mismatch. sh: r7785rp: Hook up the rest of the HL7785 FPGA IRQ vectors. sh: r2d - enable sm501 usb host function sh: remove voyagergx sh: r2d - add lcd planel timings to sm501 platform data sh: Add OHCI and UDC platform devices for SH7720. sh: intc - remove default interrupt priority tables sh: Correct pte size mismatch for X2 TLB. ...
2008-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (24 commits) HID: ADS/Tech Radio si470x needs blacklist entry HID: Logitech Extreme 3D needs NOGET quirk HID: Refactor MS Presenter 8K key mapping HID: MS Presenter mapping for PID 0x0701 HID: Support Samsung IR remote HID: fix compilation of hidbp drivers without usbhid HID: Blacklist the Gretag-Macbeth Huey display colorimeter HID: the `bit' in hidinput_mapping_quirks() is an out parameter HID: remove redundant WARN_ON()s in order not to scare users HID: force hiddev creation for SONY PS3 controller HID: Use hid blacklist in usbmouse/usbkbd HID: proper handling of MS 4k and 6k devices HID: remove unused variable in quirk event handler HID: hid-input quirk for BTC 8193 HID: separate hid-input event quirks from generic code HID: refactor mapping to input subsystem for quirky devices HID: Microsoft Wireless Optical Desktop 3.0 quirk HID: Add support for Logitech Elite keyboards HID: add full support for Genius KB-29E HID: fix a potential bug in pointer casting ...
2008-01-29Merge branch 'for-2.6.25' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.25' of git://git.kernel.dk/linux-2.6-block: block: implement drain buffers __bio_clone: don't calculate hw/phys segment counts block: allow queue dma_alignment of zero blktrace: Add blktrace ioctls to SCSI generic devices
2008-01-29Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'blk-end-request' of git://git.kernel.dk/linux-2.6-block: (30 commits) blk_end_request: changing xsysace (take 4) blk_end_request: changing ub (take 4) blk_end_request: cleanup of request completion (take 4) blk_end_request: cleanup 'uptodate' related code (take 4) blk_end_request: remove/unexport end_that_request_* (take 4) blk_end_request: changing scsi (take 4) blk_end_request: add bidi completion interface (take 4) blk_end_request: changing ide-cd (take 4) blk_end_request: add callback feature (take 4) blk_end_request: changing ide normal caller (take 4) blk_end_request: changing cpqarray (take 4) blk_end_request: changing cciss (take 4) blk_end_request: changing ide-scsi (take 4) blk_end_request: changing s390 (take 4) blk_end_request: changing mmc (take 4) blk_end_request: changing i2o_block (take 4) blk_end_request: changing viocd (take 4) blk_end_request: changing xen-blkfront (take 4) blk_end_request: changing viodasd (take 4) blk_end_request: changing sx8 (take 4) ...
2008-01-29Merge branch 'sg' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'sg' of git://git.kernel.dk/linux-2.6-block: SG: work with the SCSI fixed maximum allocations. SG: Convert SCSI to use scatterlist helpers for sg chaining SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
2008-01-29Merge branch 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'cfq-ioc-share' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: kill some big inlines cfq-iosched: relax IOPRIO_CLASS_IDLE restrictions kernel: add CLONE_IO to specifically request sharing of IO contexts io_context sharing - anticipatory changes block: cfq: make the io contect sharing lockless io_context sharing - cfq changes io context sharing: preliminary support ioprio: move io priority from task_struct to io_context
2008-01-28HID: Support Samsung IR remoteRobert Schedel
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the report descriptor from the remote contains a 48 bit HID report field. HID 1.11 states: Fields may span at most 4 bytes. This patch, based on 2.6.23, fixes this by modifying the internal report descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is required to fetch the information from the hiddev interface. The burden to reconstruct the data is moved into userspace (lirc through hiddev). There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output applications, which trigger the creation of hiddev device automatically. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: the `bit' in hidinput_mapping_quirks() is an out parameterFengguang Wu
Fix a panic, by changing hidinput_mapping_quirks(,, unsigned long *bit,) to hidinput_mapping_quirks(,, unsigned long **bit,) The `bit' in this function is an out parameter. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: proper handling of MS 4k and 6k devicesJiri Kosina
This removes ugly macros IS_* to distinguish devices that need special handling in hid-input, and establish proper quirks for them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: hid-input quirk for BTC 8193Jiri Kosina
BTC 8193 keyboard handles its scrollwheel in very non-standard way. It produces two non-standard usages for scrolling up and down, in both cases with postive value equaling to 1. We handle this by temporary mapping, which we then catch in quirk event handler, and remap to negative HWHEEL even in order to introduce correct behavior. Also the button requires special mapping, as it triggers standard-violating usage code. Reported in kernel.org bugzilla #9385 Reported-by: Kir Kolyshkin <kir@sacred.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: separate hid-input event quirks from generic codeJiri Kosina
This patch separates also the hid-input quirks that have to be applied at the time the event occurs, so that the generic code handling HUT-compliant devices is not messed up by them too much. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: refactor mapping to input subsystem for quirky devicesJiri Kosina
Currently, the handling of mapping between hid and input for devices that don't conform to HUT 1.12 specification is very messy -- no per-device handling, no blacklists, conditions on idVendor and idProduct placed all over the code. This patch moves all the device-specific input mapping to a separate file, and introduces a blacklist-style handling for non-standard device-specific mappings. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: add full support for Genius KB-29EJiri Kosina
Genius KB-29E has broken report descriptor, which causes some of the Consumer usages to appear incorrectly as Button usages. We fix it by fixing the report descriptor before it is being parsed. Also a few of the keys violate the HUT standard, so they need a special handling. They currently fall into "Reserved" range as per HUT 1.12. Reported-by: Szekeres Istvan <szekeres@iii.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Implement horizontal wheel handling for A4 Tech X5-005DPavel Troller
This mouse distinguishes horizontal wheel from vertical by a special "pseudo event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal wheel. Because this event is supplied by the parser too late, we need to delay a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to input depending on the event value. Signed-off-by: Pavel Troller <patrol@sinus.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28HID: Rename some code identifiers from PowerBook specific to Apple genericMichel Daenzer
Preserve identifiers exposed in build and run time configuration though in order not to break existing configurations. This is in preparation for adding support for Apple aluminum USB keyboards. Signed-off-by: Michel Daenzer <michel@tungstengraphics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'orion' into develRussell King
* orion: (26 commits) [ARM] Orion: implement power-off method for QNAP TS-109/209 [ARM] Orion: add support for QNAP TS-109/TS-209 [ARM] Orion: I2C support [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries [I2C] Split mv643xx I2C platform support [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323 [ARM] Orion defconfig [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323 [ARM] Orion: MV88F5181 support bits [ARM] Orion: Buffalo/Revogear Kurobox Pro support [ARM] OrionNAS RD board support [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board [ARM] Orion: common platform setup for Gigabit Ethernet port [ARM] Orion: platform device registration for UART, USB and NAND [ARM] Orion: system timer support [ARM] Orion edge GPIO IRQ support [ARM] Orion: IRQ support [ARM] Orion: provide GPIO method for enabling hardware assisted blinking [ARM] Orion: GPIO support [ARM] Orion: programable address map support ... Conflicts: arch/arm/Kconfig arch/arm/Makefile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping functionBen Dooks
Add the reverse of s3c2410_gpio_getirq to convert a IRQ number into a GPIO pin number. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.SBen Dooks
Remove warnings left in include/asm-arm/arch-s3c2410/debug-macro.S whilst these where being experimented with. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4789/1: S3C2412: Add missing CLKDIVN register valuesBen Dooks
Add S3C2412_CLKDIVN_DVSEN and S3C2412_CLKDIVN_HALFHCLK definitions to the S3C2412_CLKDIVN set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4786/1: S3C2412: Add SPI FIFO controll constantsBen Dooks
Add control constants for the S3C2412 SPI unit FIFO. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registersBen Dooks
Add definitions to allow easier decomposotion of the contents of the S3C2410_BANKON registers Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()Ben Dooks
Add the call s3c2410_gpio_getpull() to return the current state of the pin's pull-up. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ usersBen Dooks
Ensure FIQ_START is defined to allow anyone to use FIQ code on an S3C24XX based CPU. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4781/1: S3C24XX: DMA suspend and resume supportBen Dooks
If an DMA channel was active at suspend, then ensure that it is correctly reconfigured when the system resumes. Note, the previous policy was for each driver to handle their own reconfiguration on resume. The policy has been changed to make the individual driver's job easier. Signed-off-by: Ben Dooks <ben-linux@flfuf.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RXBen Dooks
The current S3C24XX DMA code does not allow for an peripheral that has one channel for RX and another for TX. This patch adds a per-cpu dma operation to select the transmit or receive channel, and adds support to the S3C2412 for the seperate DMA channels for TX and RX. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() callBen Dooks
Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep configuration of the GPIO blocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selectedKrzysztof Helt
This patch fixes compilation error if only a machine with s3c2442 cpu is selected but without s3c2440 cpu selected. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4730/1: S3C2412: Ensure the PWRCFG has the right mode for RTC wakeBen Dooks
Ensure that if the RTC IRQ is not selected for wake in the base configuration, then the PWRCFG has the same value set in it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4727/1: S3C2412: Remove unused GPESLPCONBen Dooks
S3C2412_GPESLPCON does not exist in the register mappings, so remove it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4726/1: S3C2412: IIS register definitionsBen Dooks
The S3C2412 IIS engine differs from the previous SoC in the range, so add a set of register definitions in a seperate file for it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4722/1: S3C24XX: Improve output if watchdog reset failsBen Dooks
If the watchdog reset fails and we decided to take the jump to zero approach, allow 50ms for the UARTS to drain the FIFOs before calling into a bootloader that may flush the output. Also reduece the waits and the timeout values as 5 seconds is rather long. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4721/1: S3C24XX: Ensure watchdog clock is enbaled for hard resetBen Dooks
If the hard reset routine is using the watchdog, then ensure that the clock for the watchdog has been enabled before we try and issue a reset. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4720/1: S3C2412: Add power configuration registers for battery flat ↵Ben Dooks
behaviour. Add the S3C2412_PWRCFG values for the action taken on detecting that the battery is flat. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4719/1: S3C2412: Update SPI register definitions for the S3C2412Ben Dooks
Add S3C2412 register definitions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4762/1: Basic support for Toradex Colibri moduleDaniel Mack
This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfixRichard Purdie
This patch refactors the code in corgi_lcd.c moving it to the board specific corgi and spitz files where appropriate instead of the existing ifdef mess which hinders readability. Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be compiled as a module. The confusing variables which represent the inverse horizintal sync period are renamed to "invperiod" consistently. An incorrect comment in corgi_ts.c is also corrected. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270Robert Schwebel
This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU moduleRobert Schwebel
This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)eric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4664/1: Add basic support for HTC Magician PDA phonesPhilipp Zabel
This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28SG: work with the SCSI fixed maximum allocations.James Bottomley
SCSI sg table allocation has a maximum size (of SCSI_MAX_SG_SEGMENTS, currently 128) and this will cause a BUG_ON() in SCSI if something tries an allocation over it. This patch adds a size limit to the chaining allocator to allow the specification of the maximum allocation size for chaining, so we always chain in units of the maximum SCSI allocation size. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28block: implement drain buffersJames Bottomley
These DMA drain buffer implementations in drivers are pretty horrible to do in terms of manipulating the scatterlist. Plus they're being done at least in drivers/ide and drivers/ata, so we now have code duplication. The one use case for this, as I understand it is AHCI controllers doing PIO mode to mmc devices but translating this to DMA at the controller level. So, what about adding a callback to the block layer that permits the adding of the drain buffer for the problem devices. The idea is that you'd do this in slave_configure after you find one of these devices. The beauty of doing it in the block layer is that it quietly adds the drain buffer to the end of the sg list, so it automatically gets mapped (and unmapped) without anything unusual having to be done to the scatterlist in driver/scsi or drivers/ata and without any alteration to the transfer length. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28kernel: add CLONE_IO to specifically request sharing of IO contextsJens Axboe
syslets (or other threads/processes that want io context sharing) can set this to enforce sharing of io context. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 06:29:37 +0000