Age | Commit message (Collapse) | Author |
|
* v4.4-16.09-android-tmp:
unsafe_[get|put]_user: change interface to use a error target label
usercopy: remove page-spanning test for now
usercopy: fix overlap check for kernel text
mm/slub: support left redzone
Linux 4.4.21
lib/mpi: mpi_write_sgl(): fix skipping of leading zero limbs
regulator: anatop: allow regulator to be in bypass mode
hwrng: exynos - Disable runtime PM on probe failure
cpufreq: Fix GOV_LIMITS handling for the userspace governor
metag: Fix atomic_*_return inline asm constraints
scsi: fix upper bounds check of sense key in scsi_sense_key_string()
ALSA: timer: fix NULL pointer dereference on memory allocation failure
ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
ALSA: hda - Enable subwoofer on Dell Inspiron 7559
ALSA: hda - Add headset mic quirk for Dell Inspiron 5468
ALSA: rawmidi: Fix possible deadlock with virmidi registration
ALSA: fireworks: accessing to user space outside spinlock
ALSA: firewire-tascam: accessing to user space outside spinlock
ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114
crypto: caam - fix IV loading for authenc (giv)decryption
uprobes: Fix the memcg accounting
x86/apic: Do not init irq remapping if ioapic is disabled
vhost/scsi: fix reuse of &vq->iov[out] in response
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
ubifs: Fix assertion in layout_in_gaps()
ovl: fix workdir creation
ovl: listxattr: use strnlen()
ovl: remove posix_acl_default from workdir
ovl: don't copy up opaqueness
wrappers for ->i_mutex access
lustre: remove unused declaration
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
timekeeping: Cap array access in timekeeping_debug
xfs: fix superblock inprogress check
ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
drm/msm: fix use of copy_from_user() while holding spinlock
drm: Reject page_flip for !DRIVER_MODESET
drm/radeon: fix radeon_move_blit on 32bit systems
s390/sclp_ctl: fix potential information leak with /dev/sclp
rds: fix an infoleak in rds_inc_info_copy
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
nvme: Call pci_disable_device on the error path.
cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
block: make sure a big bio is split into at most 256 bvecs
block: Fix race triggered by blk_set_queue_dying()
ext4: avoid modifying checksum fields directly during checksum verification
ext4: avoid deadlock when expanding inode size
ext4: properly align shifted xattrs when expanding inodes
ext4: fix xattr shifting when expanding inodes part 2
ext4: fix xattr shifting when expanding inodes
ext4: validate that metadata blocks do not overlap superblock
net: Use ns_capable_noaudit() when determining net sysctl permissions
kernel: Add noaudit variant of ns_capable()
KEYS: Fix ASN.1 indefinite length object parsing
drivers:hv: Lock access to hyperv_mmio resource tree
cxlflash: Move to exponential back-off when cmd_room is not available
netfilter: x_tables: check for size overflow
drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
IB/IPoIB: Do not set skb truesize since using one linearskb
udp: properly support MSG_PEEK with truncated buffers
crypto: nx-842 - Mask XERS0 bit in return value
cxlflash: Fix to avoid virtual LUN failover failure
cxlflash: Fix to escalate LINK_RESET also on port 1
tipc: fix nl compat regression for link statistics
tipc: fix an infoleak in tipc_nl_compat_link_dump
netfilter: x_tables: check for size overflow
Bluetooth: Add support for Intel Bluetooth device 8265 [8087:0a2b]
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
Input: xpad - move pending clear to the correct location
net: thunderx: Fix link status reporting
x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
crypto: vmx - IV size failing on skcipher API
tda10071: Fix dependency to REGMAP_I2C
crypto: vmx - Fix ABI detection
crypto: vmx - comply with ABIs that specify vrsave as reserved.
HID: core: prevent out-of-bound readings
lpfc: Fix DMA faults observed upon plugging loopback connector
block: fix blk_rq_get_max_sectors for driver private requests
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
clocksource: Allow unregistering the watchdog
btrfs: Continue write in case of can_not_nocow
blk-mq: End unstarted requests on dying queue
cxlflash: Fix to resolve dead-lock during EEH recovery
drm/radeon/mst: fix regression in lane/link handling.
ecryptfs: fix handling of directory opening
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
drm: Balance error path for GEM handle allocation
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflow
Input: xpad - correctly handle concurrent LED and FF requests
net: thunderx: Fix receive packet stats
net: thunderx: Fix for multiqset not configured upon interface toggle
perf/x86/cqm: Fix CQM memory leak and notifier leak
perf/x86/cqm: Fix CQM handling of grouping events into a cache_group
s390/crypto: provide correct file mode at device register.
proc: revert /proc/<pid>/maps [stack:TID] annotation
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
cxlflash: Fix to avoid unnecessary scan with internal LUNs
Drivers: hv: vmbus: don't manipulate with clocksources on crash
Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()
Drivers: hv: vmbus: avoid infinite loop in init_vp_index()
arcmsr: fixes not release allocated resource
arcmsr: fixed getting wrong configuration data
s390/pci_dma: fix DMA table corruption with > 4 TB main memory
net/mlx5e: Don't modify CQ before it was created
net/mlx5e: Don't try to modify CQ moderation if it is not supported
mmc: sdhci: Do not BUG on invalid vdd
UVC: Add support for R200 depth camera
sched/numa: Fix use-after-free bug in the task_numa_compare
ALSA: hda - add codec support for Kabylake display audio codec
drm/i915: Fix hpd live status bits for g4x
tipc: fix nullptr crash during subscription cancel
arm64: Add workaround for Cavium erratum 27456
net: thunderx: Fix for Qset error due to CQ full
drm/radeon: fix dp link rate selection (v2)
drm/amdgpu: fix dp link rate selection (v2)
qla2xxx: Use ATIO type to send correct tmr response
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
drm/atomic: Do not unset crtc when an encoder is stolen
drm/i915/skl: Add missing SKL ids
drm/i915/bxt: update list of PCIIDs
hrtimer: Catch illegal clockids
i40e/i40evf: Fix RSS rx-flow-hash configuration through ethtool
mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO.
mpt3sas: A correction in unmap_resources
net: cavium: liquidio: fix check for in progress flag
arm64: KVM: Configure TCR_EL2.PS at runtime
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
pwm: lpc32xx: fix and simplify duty cycle and period calculations
pwm: lpc32xx: correct number of PWM channels from 2 to 1
pwm: fsl-ftm: Fix clock enable/disable when using PM
megaraid_sas: Add an i/o barrier
megaraid_sas: Fix SMAP issue
megaraid_sas: Do not allow PCI access during OCR
s390/cio: update measurement characteristics
s390/cio: ensure consistent measurement state
s390/cio: fix measurement characteristics memleak
qeth: initialize net_device with carrier off
lpfc: Fix external loopback failure.
lpfc: Fix mbox reuse in PLOGI completion
lpfc: Fix RDP Speed reporting.
lpfc: Fix crash in fcp command completion path.
lpfc: Fix driver crash when module parameter lpfc_fcp_io_channel set to 16
lpfc: Fix RegLogin failed error seen on Lancer FC during port bounce
lpfc: Fix the FLOGI discovery logic to comply with T11 standards
lpfc: Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get.
cxl: Enable PCI device ID for future IBM CXL adapter
cxl: fix build for GCC 4.6.x
cxlflash: Enable device id for future IBM CXL adapter
cxlflash: Resolve oops in wait_port_offline
cxlflash: Fix to resolve cmd leak after host reset
cxl: Fix DSI misses when the context owning task exits
cxl: Fix possible idr warning when contexts are released
Drivers: hv: vmbus: fix rescind-offer handling for device without a driver
Drivers: hv: vmbus: serialize process_chn_event() and vmbus_close_internal()
Drivers: hv: vss: run only on supported host versions
drivers/hv: cleanup synic msrs if vmbus connect failed
Drivers: hv: util: catch allocation errors
tools: hv: report ENOSPC errors in hv_fcopy_daemon
Drivers: hv: utils: run polling callback always in interrupt context
Drivers: hv: util: Increase the timeout for util services
lightnvm: fix missing grown bad block type
lightnvm: fix locking and mempool in rrpc_lun_gc
lightnvm: unlock rq and free ppa_list on submission fail
lightnvm: add check after mempool allocation
lightnvm: fix incorrect nr_free_blocks stat
lightnvm: fix bio submission issue
cxlflash: a couple off by one bugs
fm10k: Cleanup exception handling for mailbox interrupt
fm10k: Cleanup MSI-X interrupts in case of failure
fm10k: reinitialize queuing scheme after calling init_hw
fm10k: always check init_hw for errors
fm10k: reset max_queues on init_hw_vf failure
fm10k: Fix handling of NAPI budget when multiple queues are enabled per vector
fm10k: Correct MTU for jumbo frames
fm10k: do not assume VF always has 1 queue
clk: xgene: Fix divider with non-zero shift value
e1000e: fix division by zero on jumbo MTUs
e1000: fix data race between tx_ring->next_to_clean
ixgbe: Fix handling of NAPI budget when multiple queues are enabled per vector
igb: fix NULL derefs due to skipped SR-IOV enabling
igb: use the correct i210 register for EEMNGCTL
igb: don't unmap NULL hw_addr
i40e: Fix Rx hash reported to the stack by our driver
i40e: clean whole mac filter list
i40evf: check rings before freeing resources
i40e: don't add zero MAC filter
i40e: properly delete VF MAC filters
i40e: Fix memory leaks, sideband filter programming
i40e: fix: do not sleep in netdev_ops
i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaround
i40evf: handle many MAC filters correctly
i40e: Workaround fix for mss < 256 issue
UPSTREAM: audit: fix a double fetch in audit_log_single_execve_arg()
UPSTREAM: ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
FIXUP: sched/tune: update accouting before CPU capacity
FIXUP: sched/tune: add fixes missing from a previous patch
arm: Fix #if/#ifdef typo in topology.c
arm: Fix build error "conflicting types for 'scale_cpu_capacity'"
sched/walt: use do_div instead of division operator
DEBUG: cpufreq: fix cpu_capacity tracing build for non-smp systems
sched/walt: include missing header for arm_timer_read_counter()
cpufreq: Kconfig: Fixup incorrect selection by CPU_FREQ_DEFAULT_GOV_SCHED
sched/fair: Avoid redundant idle_cpu() call in update_sg_lb_stats()
FIXUP: sched: scheduler-driven cpu frequency selection
sched/rt: Add Kconfig option to enable panicking for RT throttling
sched/rt: print RT tasks when RT throttling is activated
UPSTREAM: sched: Fix a race between __kthread_bind() and sched_setaffinity()
sched/fair: Favor higher cpus only for boosted tasks
vmstat: make vmstat_updater deferrable again and shut down on idle
sched/fair: call OPP update when going idle after migration
sched/cpufreq_sched: fix thermal capping events
sched/fair: Picking cpus with low OPPs for tasks that prefer idle CPUs
FIXUP: sched/tune: do initialization as a postcore_initicall
DEBUG: sched: add tracepoint for RD overutilized
sched/tune: Introducing a new schedtune attribute prefer_idle
sched: use util instead of capacity to select busy cpu
arch_timer: add error handling when the MPM global timer is cleared
FIXUP: sched: Fix double-release of spinlock in move_queued_task
FIXUP: sched/fair: Fix hang during suspend in sched_group_energy
FIXUP: sched: fix SchedFreq integration for both PELT and WALT
sched: EAS: Avoid causing spikes to max-freq unnecessarily
FIXUP: sched: fix set_cfs_cpu_capacity when WALT is in use
sched/walt: Accounting for number of irqs pending on each core
sched: Introduce Window Assisted Load Tracking (WALT)
sched/tune: fix PB and PC cuts indexes definition
sched/fair: optimize idle cpu selection for boosted tasks
FIXUP: sched/tune: fix accounting for runnable tasks
sched/tune: use a single initialisation function
sched/{fair,tune}: simplify fair.c code
FIXUP: sched/tune: fix payoff calculation for boost region
sched/tune: Add support for negative boost values
FIX: sched/tune: move schedtune_nornalize_energy into fair.c
FIX: sched/tune: update usage of boosted task utilisation on CPU selection
sched/fair: add tunable to set initial task load
sched/fair: add tunable to force selection at cpu granularity
sched: EAS: take cstate into account when selecting idle core
sched/cpufreq_sched: Consolidated update
FIXUP: sched: fix build for non-SMP target
DEBUG: sched/tune: add tracepoint on P-E space filtering
DEBUG: sched/tune: add tracepoint for energy_diff() values
DEBUG: sched/tune: add tracepoint for task boost signal
arm: topology: Define TC2 energy and provide it to the scheduler
CHROMIUM: sched: update the average of nr_running
DEBUG: schedtune: add tracepoint for schedtune_tasks_update() values
DEBUG: schedtune: add tracepoint for CPU boost signal
DEBUG: schedtune: add tracepoint for SchedTune configuration update
DEBUG: sched: add energy procfs interface
DEBUG: sched,cpufreq: add cpu_capacity change tracepoint
DEBUG: sched: add tracepoint for CPU load/util signals
DEBUG: sched: add tracepoint for task load/util signals
DEBUG: sched: add tracepoint for cpu/freq scale invariance
sched/fair: filter energy_diff() based on energy_payoff value
sched/tune: add support to compute normalized energy
sched/fair: keep track of energy/capacity variations
sched/fair: add boosted task utilization
sched/{fair,tune}: track RUNNABLE tasks impact on per CPU boost value
sched/tune: compute and keep track of per CPU boost value
sched/tune: add initial support for CGroups based boosting
sched/fair: add boosted CPU usage
sched/fair: add function to convert boost value into "margin"
sched/tune: add sysctl interface to define a boost value
sched/tune: add detailed documentation
fixup! sched/fair: jump to max OPP when crossing UP threshold
fixup! sched: scheduler-driven cpu frequency selection
sched: rt scheduler sets capacity requirement
sched: deadline: use deadline bandwidth in scale_rt_capacity
sched: remove call of sched_avg_update from sched_rt_avg_update
sched/cpufreq_sched: add trace events
sched/fair: jump to max OPP when crossing UP threshold
sched/fair: cpufreq_sched triggers for load balancing
sched/{core,fair}: trigger OPP change request on fork()
sched/fair: add triggers for OPP change requests
sched: scheduler-driven cpu frequency selection
cpufreq: introduce cpufreq_driver_is_slow
sched: Consider misfit tasks when load-balancing
sched: Add group_misfit_task load-balance type
sched: Add per-cpu max capacity to sched_group_capacity
sched: Do eas idle balance regardless of the rq avg idle value
arm64: Enable max freq invariant scheduler load-tracking and capacity support
arm: Enable max freq invariant scheduler load-tracking and capacity support
sched: Update max cpu capacity in case of max frequency constraints
cpufreq: Max freq invariant scheduler load-tracking and cpu capacity support
arm64, topology: Updates to use DT bindings for EAS costing data
sched: Support for extracting EAS energy costs from DT
Documentation: DT bindings for energy model cost data required by EAS
sched: Disable energy-unfriendly nohz kicks
sched: Consider a not over-utilized energy-aware system as balanced
sched: Energy-aware wake-up task placement
sched: Determine the current sched_group idle-state
sched, cpuidle: Track cpuidle state index in the scheduler
sched: Add over-utilization/tipping point indicator
sched: Estimate energy impact of scheduling decisions
sched: Extend sched_group_energy to test load-balancing decisions
sched: Calculate energy consumption of sched_group
sched: Highest energy aware balancing sched_domain level pointer
sched: Relocated cpu_util() and change return type
sched: Compute cpu capacity available at current frequency
arm64: Cpu invariant scheduler load-tracking and capacity support
arm: Cpu invariant scheduler load-tracking and capacity support
sched: Introduce SD_SHARE_CAP_STATES sched_domain flag
sched: Initialize energy data structures
sched: Introduce energy data structures
sched: Make energy awareness a sched feature
sched: Documentation for scheduler energy cost model
sched: Prevent unnecessary active balance of single task in sched group
sched: Enable idle balance to pull single task towards cpu with higher capacity
sched: Consider spare cpu capacity at task wake-up
sched: Add cpu capacity awareness to wakeup balancing
sched: Store system-wide maximum cpu capacity in root domain
arm: Update arch_scale_cpu_capacity() to reflect change to define
arm64: Enable frequency invariant scheduler load-tracking support
arm: Enable frequency invariant scheduler load-tracking support
cpufreq: Frequency invariant scheduler load-tracking support
sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()
FROMLIST: pstore: drop pmsg bounce buffer
UPSTREAM: usercopy: remove page-spanning test for now
UPSTREAM: usercopy: force check_object_size() inline
BACKPORT: usercopy: fold builtin_const check into inline function
UPSTREAM: x86/uaccess: force copy_*_user() to be inlined
UPSTREAM: HID: core: prevent out-of-bound readings
Android: Fix build breakages.
UPSTREAM: tty: Prevent ldisc drivers from re-using stale tty fields
UPSTREAM: netfilter: nfnetlink: correctly validate length of batch messages
cpuset: Make cpusets restore on hotplug
UPSTREAM: mm/slub: support left redzone
UPSTREAM: Make the hardened user-copy code depend on having a hardened allocator
Android: MMC/UFS IO Latency Histograms.
UPSTREAM: usercopy: fix overlap check for kernel text
UPSTREAM: usercopy: avoid potentially undefined behavior in pointer math
UPSTREAM: unsafe_[get|put]_user: change interface to use a error target label
BACKPORT: arm64: mm: fix location of _etext
BACKPORT: ARM: 8583/1: mm: fix location of _etext
BACKPORT: Don't show empty tag stats for unprivileged uids
UPSTREAM: tcp: fix use after free in tcp_xmit_retransmit_queue()
ANDROID: base-cfg: drop SECCOMP_FILTER config
UPSTREAM: [media] xc2028: unlock on error in xc2028_set_config()
UPSTREAM: [media] xc2028: avoid use after free
ANDROID: base-cfg: enable SECCOMP config
ANDROID: rcu_sync: Export rcu_sync_lockdep_assert
RFC: FROMLIST: cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
RFC: FROMLIST: cgroup: avoid synchronize_sched() in __cgroup_procs_write()
RFC: FROMLIST: locking/percpu-rwsem: Optimize readers and reduce global impact
net: ipv6: Fix ping to link-local addresses.
ipv6: fix endianness error in icmpv6_err
ANDROID: dm: android-verity: Allow android-verity to be compiled as an independent module
backporting: a brief introduce of backported feautures on 4.4
Linux 4.4.20
sysfs: correctly handle read offset on PREALLOC attrs
hwmon: (iio_hwmon) fix memory leak in name attribute
ALSA: line6: Fix POD sysfs attributes segfault
ALSA: line6: Give up on the lock while URBs are released.
ALSA: line6: Remove double line6_pcm_release() after failed acquire.
ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present
ACPI / sysfs: fix error code in get_status()
ACPI / drivers: replace acpi_probe_lock spinlock with mutex
ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
USB: serial: option: add WeTelecom 0x6802 and 0x6803 products
USB: serial: option: add WeTelecom WM-D200
USB: serial: mos7840: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
USB: fix typo in wMaxPacketSize validation
usb: chipidea: udc: don't touch DP when controller is in host mode
USB: avoid left shift by -1
dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
crypto: qat - fix aes-xts key sizes
crypto: nx - off by one bug in nx_of_update_msc()
Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: tegra-kbc - fix inverted reset logic
btrfs: properly track when rescan worker is running
btrfs: waiting on qgroup rescan should not always be interruptible
fs/seq_file: fix out-of-bounds read
gpio: Fix OF build problem on UM
usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()
megaraid_sas: Fix probing cards without io port
mpt3sas: Fix resume on WarpDrive flash cards
cdc-acm: fix wrong pipe type on rx interrupt xfers
i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
aacraid: Check size values after double-fetch from user
ARC: Elide redundant setup of DMA callbacks
ARC: Call trace_hardirqs_on() before enabling irqs
ARC: use correct offset in pt_regs for saving/restoring user mode r25
ARC: build: Better way to detect ISA compatible toolchain
drm/i915: fix aliasing_ppgtt leak
drm/amdgpu: record error code when ring test failed
drm/amd/amdgpu: sdma resume fail during S4 on CI
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/amdgpu: Change GART offset to 64-bit
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
sched/nohz: Fix affine unpinned timers mess
sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
of: fix reference counting in of_graph_get_endpoint_by_regs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
mac80211: fix purging multicast PS buffer queue
s390/dasd: fix hanging device after clear subchannel
EDAC: Increment correct counter in edac_inc_ue_error()
pinctrl/amd: Remove the default de-bounce time
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Fix CMDQ error handling
iommu/dma: Don't put uninitialised IOVA domains
xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.
USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices
USB: serial: ftdi_sio: add device ID for WICED USB UART dev board
USB: serial: option: add support for Telit LE920A4
USB: serial: option: add D-Link DWM-156/A3
USB: serial: fix memleak in driver-registration error path
xhci: don't dereference a xhci member after removing xhci
usb: xhci: Fix panic if disconnect
xhci: always handle "Command Ring Stopped" events
usb/gadget: fix gadgetfs aio support.
usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
USB: validate wMaxPacketValue entries in endpoint descriptors
usb: renesas_usbhs: Use dmac only if the pipe type is bulk
usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()
USB: hub: change the locking in hub_activate
USB: hub: fix up early-exit pathway in hub_activate
usb: hub: Fix unbalanced reference count/memory leak/deadlocks
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices
usb: dwc3: gadget: increment request->actual once
usb: dwc3: pci: add Intel Kabylake PCI ID
usb: misc: usbtest: add fix for driver hang
usb: ehci: change order of register cleanup during shutdown
crypto: caam - defer aead_set_sh_desc in case of zero authsize
crypto: caam - fix echainiv(authenc) encrypt shared descriptor
crypto: caam - fix non-hmac hashes
genirq/msi: Make sure PCI MSIs are activated early
genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
um: Don't discard .text.exit section
ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
ACPI: CPPC: Return error if _CPC is invalid on a CPU
mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
PCI: Limit config space size for Netronome NFP4000
PCI: Add Netronome NFP4000 PF device ID
PCI: Limit config space size for Netronome NFP6000 family
PCI: Add Netronome vendor and device IDs
PCI: Support PCIe devices with short cfg_size
NVMe: Don't unmap controller registers on reset
ALSA: hda - Manage power well properly for resume
libnvdimm, nd_blk: mask off reserved status bits
perf intel-pt: Fix occasional decoding errors when tracing system-wide
vfio/pci: Fix NULL pointer oops in error interrupt setup handling
virtio: fix memory leak in virtqueue_add()
parisc: Fix order of EREFUSED define in errno.h
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
ALSA: usb-audio: Add quirk for ELP HD USB Camera
ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD (VF0610)
powerpc/eeh: eeh_pci_enable(): fix checking of post-request state
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Handle EADDRNOTAVAIL on connection failures
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
x86/mm: Disable preemption during CR3 read+write
hugetlb: fix nr_pmds accounting with shared page tables
mm: SLUB hardened usercopy support
mm: SLAB hardened usercopy support
s390/uaccess: Enable hardened usercopy
sparc/uaccess: Enable hardened usercopy
powerpc/uaccess: Enable hardened usercopy
ia64/uaccess: Enable hardened usercopy
arm64/uaccess: Enable hardened usercopy
ARM: uaccess: Enable hardened usercopy
x86/uaccess: Enable hardened usercopy
x86: remove more uaccess_32.h complexity
x86: remove pointless uaccess_32.h complexity
x86: fix SMAP in 32-bit environments
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
mm: Hardened usercopy
mm: Implement stack frame object validation
mm: Add is_migrate_cma_page
Linux 4.4.19
Documentation/module-signing.txt: Note need for version info if reusing a key
module: Invalidate signatures on force-loaded modules
dm flakey: error READ bios during the down_interval
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()
ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
x86/platform/intel_mid_pci: Rework IRQ0 workaround
PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
MIPS: hpet: Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
MIPS: Don't register r4k sched clock when CPUFREQ enabled
MIPS: mm: Fix definition of R6 cache instruction
SUNRPC: Don't allocate a full sockaddr_storage for tracing
Input: elan_i2c - properly wake up touchpad on ASUS laptops
target: Fix ordered task CHECK_CONDITION early exception handling
target: Fix max_unmap_lba_count calc overflow
target: Fix race between iscsi-target connection shutdown + ABORT_TASK
target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP
target: Fix ordered task target_setup_cmd_from_cdb exception hang
iscsi-target: Fix panic when adding second TCP connection to iSCSI session
ubi: Fix race condition between ubi device creation and udev
ubi: Fix early logging
ubi: Make volume resize power cut aware
of: fix memory leak related to safe_name()
IB/mlx4: Fix memory leak if QP creation failed
IB/mlx4: Fix error flow when sending mads under SRIOV
IB/mlx4: Fix the SQ size of an RC QP
IB/IWPM: Fix a potential skb leak
IB/IPoIB: Don't update neigh validity for unresolved entries
IB/SA: Use correct free function
IB/mlx5: Return PORT_ERR in Active to Initializing tranisition
IB/mlx5: Fix post send fence logic
IB/mlx5: Fix entries check in mlx5_ib_resize_cq
IB/mlx5: Fix returned values of query QP
IB/mlx5: Fix entries checks in mlx5_ib_create_cq
IB/mlx5: Fix MODIFY_QP command input structure
ALSA: hda - Fix headset mic detection problem for two dell machines
ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps
ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO
ALSA: hda: Fix krealloc() with __GFP_ZERO usage
mm/hugetlb: avoid soft lockup in set_max_huge_pages()
mtd: nand: fix bug writing 1 byte less than page size
block: fix bdi vs gendisk lifetime mismatch
block: add missing group association in bio-cloning functions
metag: Fix __cmpxchg_u32 asm constraint for CMP
ftrace/recordmcount: Work around for addition of metag magic but not relocations
balloon: check the number of available pages in leak balloon
drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/edid: Add 6 bpc quirk for display AEO model 0.
drm: Restore double clflush on the last partial cacheline
drm/nouveau/fbcon: fix font width not divisible by 8
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau: check for supported chipset before booting fbdev off the hw
drm/radeon: support backlight control for UNIPHY3
drm/radeon: fix firmware info version checks
drm/radeon: Poll for both connect/disconnect on analog connectors
drm/radeon: add a delay after ATPX dGPU power off
drm/amdgpu/gmc7: add missing mullins case
drm/amdgpu: fix firmware info version checks
drm/amdgpu: Disable RPM helpers while reprobing connectors on resume
drm/amdgpu: support backlight control for UNIPHY3
drm/amdgpu: Poll for both connect/disconnect on analog connectors
drm/amdgpu: add a delay after ATPX dGPU power off
w1:omap_hdq: fix regression
netlabel: add address family checks to netlbl_{sock,req}_delattr()
ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys
audit: fix a double fetch in audit_log_single_execve_arg()
iommu/amd: Update Alias-DTE in update_device_table()
iommu/amd: Init unity mappings only for dma_ops domains
iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back
iommu/vt-d: Return error code in domain_context_mapping_one()
iommu/exynos: Suppress unbinding to prevent system failure
drm/i915: Don't complain about lack of ACPI video bios
nfsd: don't return an unhashed lock stateid after taking mutex
nfsd: Fix race between FREE_STATEID and LOCK
nfs: don't create zero-length requests
MIPS: KVM: Propagate kseg0/mapped tlb fault errors
MIPS: KVM: Fix gfn range check in kseg0 tlb faults
MIPS: KVM: Add missing gfn range check
MIPS: KVM: Fix mapped fault broken commpage handling
random: add interrupt callback to VMBus IRQ handler
random: print a warning for the first ten uninitialized random users
random: initialize the non-blocking pool via add_hwgenerator_randomness()
CIFS: Fix a possible invalid memory access in smb2_query_symlink()
cifs: fix crash due to race in hmac(md5) handling
cifs: Check for existing directory when opening file with O_CREAT
fs/cifs: make share unaccessible at root level mountable
jbd2: make journal y2038 safe
ARC: mm: don't loose PTE_SPECIAL in pte_modify()
remoteproc: Fix potential race condition in rproc_add
ovl: disallow overlayfs as upperdir
HID: uhid: fix timeout when probe races with IO
EDAC: Correct channel count limit
Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU
spi: pxa2xx: Clear all RFT bits in reset_sccr1() on Intel Quark
i2c: efm32: fix a failure path in efm32_i2c_probe()
s5p-mfc: Add release callback for memory region devs
s5p-mfc: Set device name for reserved memory region devs
hp-wmi: Fix wifi cannot be hard-unblocked
dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING
sur40: fix occasional oopses on device close
sur40: lower poll interval to fix occasional FPS drops to ~56 FPS
Fix RC5 decoding with Fintek CIR chipset
vb2: core: Skip planes array verification if pb is NULL
videobuf2-v4l2: Verify planes array in buffer dequeueing
media: dvb_ringbuffer: Add memory barriers
media: usbtv: prevent access to free'd resources
mfd: qcom_rpm: Parametrize also ack selector size
mfd: qcom_rpm: Fix offset error for msm8660
intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
s390/cio: allow to reset channel measurement block
KVM: nVMX: Fix memory corruption when using VMCS shadowing
KVM: VMX: handle PML full VMEXIT that occurs during event delivery
KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault
KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
pinctrl: cherryview: prevent concurrent access to GPIO controllers
Bluetooth: hci_intel: Fix null gpio desc pointer dereference
gpio: intel-mid: Remove potentially harmful code
gpio: pca953x: Fix NBANK calculation for PCA9536
tty/serial: atmel: fix RS485 half duplex with DMA
serial: samsung: Fix ERR pointer dereference on deferred probe
tty: serial: msm: Don't read off end of tx fifo
arm64: Fix incorrect per-cpu usage for boot CPU
arm64: debug: unmask PSTATE.D earlier
arm64: kernel: Save and restore UAO and addr_limit on exception entry
USB: usbfs: fix potential infoleak in devio
usb: renesas_usbhs: fix NULL pointer dereference in xfer_work()
USB: serial: option: add support for Telit LE910 PID 0x1206
usb: dwc3: fix for the isoc transfer EP_BUSY flag
usb: quirks: Add no-lpm quirk for Elan
usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()
usb: f_fs: off by one bug in _ffs_func_bind()
usb: gadget: avoid exposing kernel stack
UPSTREAM: usb: gadget: configfs: add mutex lock before unregister gadget
ANDROID: dm-verity: adopt changes made to dm callbacks
UPSTREAM: ecryptfs: fix handling of directory opening
ANDROID: net: core: fix UID-based routing
ANDROID: net: fib: remove duplicate assignment
FROMLIST: proc: Fix timerslack_ns CAP_SYS_NICE check when adjusting self
ANDROID: dm verity fec: pack the fec_header structure
ANDROID: dm: android-verity: Verify header before fetching table
ANDROID: dm: allow adb disable-verity only in userdebug
ANDROID: dm: mount as linear target if eng build
ANDROID: dm: use default verity public key
ANDROID: dm: fix signature verification flag
ANDROID: dm: use name_to_dev_t
ANDROID: dm: rename dm-linear methods for dm-android-verity
ANDROID: dm: Minor cleanup
ANDROID: dm: Mounting root as linear device when verity disabled
ANDROID: dm-android-verity: Rebase on top of 4.1
ANDROID: dm: Add android verity target
ANDROID: dm: fix dm_substitute_devices()
ANDROID: dm: Rebase on top of 4.1
CHROMIUM: dm: boot time specification of dm=
Implement memory_state_time, used by qcom,cpubw
Revert "panic: Add board ID to panic output"
usb: gadget: f_accessory: remove duplicate endpoint alloc
BACKPORT: brcmfmac: defer DPC processing during probe
FROMLIST: proc: Add LSM hook checks to /proc/<tid>/timerslack_ns
FROMLIST: proc: Relax /proc/<tid>/timerslack_ns capability requirements
UPSTREAM: ppp: defer netns reference release for ppp channel
cpuset: Add allow_attach hook for cpusets on android.
UPSTREAM: KEYS: Fix ASN.1 indefinite length object parsing
ANDROID: sdcardfs: fix itnull.cocci warnings
android-recommended.cfg: enable fstack-protector-strong
Linux 4.4.18
mm: memcontrol: fix memcg id ref counter on swap charge move
mm: memcontrol: fix swap counter leak on swapout from offline cgroup
mm: memcontrol: fix cgroup creation failure after many small jobs
ext4: fix reference counting bug on block allocation error
ext4: short-cut orphan cleanup on error
ext4: validate s_reserved_gdt_blocks on mount
ext4: don't call ext4_should_journal_data() on the journal inode
ext4: fix deadlock during page writeback
ext4: check for extents that wrap around
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: gcm - Filter out async ghash if necessary
fs/dcache.c: avoid soft-lockup in dput()
fuse: fix wrong assignment of ->flags in fuse_send_init()
fuse: fuse_flush must check mapping->flags for errors
fuse: fsync() did not return IO errors
sysv, ipc: fix security-layer leaking
block: fix use-after-free in seq file
x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace
drm/i915: Pretend cursor is always on for ILK-style WM calculations (v2)
x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386
x86/pat: Document the PAT initialization sequence
x86/xen, pat: Remove PAT table init code from Xen
x86/mtrr: Fix PAT init handling when MTRR is disabled
x86/mtrr: Fix Xorg crashes in Qemu sessions
x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
x86/mm/pat: Add pat_disable() interface
x86/mm/pat: Add support of non-default PAT MSR setting
devpts: clean up interface to pty drivers
random: strengthen input validation for RNDADDTOENTCNT
apparmor: fix ref count leak when profile sha1 hash is read
Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"
KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspace
arm: oabi compat: add missing access checks
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
x86/mm/32: Enable full randomization on i386 and X86_32
HID: sony: do not bail out when the sixaxis refuses the output report
PNP: Add Broadwell to Intel MCH size workaround
PNP: Add Haswell-ULT to Intel MCH size workaround
scsi: ignore errors from scsi_dh_add_device()
ipath: Restrict use of the write() interface
tcp: consider recv buf for the initial window scale
qed: Fix setting/clearing bit in completion bitmap
net/irda: fix NULL pointer dereference on memory allocation failure
net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
bonding: set carrier off for devices created through netlink
ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user space
tcp: enable per-socket rate limiting of all 'challenge acks'
tcp: make challenge acks less predictable
arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
Linux 4.4.17
vfs: fix deadlock in file_remove_privs() on overlayfs
intel_th: Fix a deadlock in modprobing
intel_th: pci: Add Kaby Lake PCH-H support
net: mvneta: set real interrupt per packet for tx_done
libceph: apply new_state before new_up_client on incrementals
libata: LITE-ON CX1-JB256-HP needs lower max_sectors
i2c: mux: reg: wrong condition checked for of_address_to_resource return value
posix_cpu_timer: Exit early when process has been reaped
media: fix airspy usb probe error path
ipr: Clear interrupt on croc/crocodile when running with LSI
SCSI: fix new bug in scsi_dev_info_list string matching
RDS: fix rds_tcp_init() error path
can: fix oops caused by wrong rtnl dellink usage
can: fix handling of unmodifiable configuration options fix
can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access
can: at91_can: RX queue could get stuck at high bus load
perf/x86: fix PEBS issues on Intel Atom/Core2
ovl: handle ATTR_KILL*
sched/fair: Fix effective_load() to consistently use smoothed load
mmc: block: fix packed command header endianness
block: fix use-after-free in sys_ioprio_get()
qeth: delete napi struct when removing a qeth device
platform/chrome: cros_ec_dev - double fetch bug in ioctl
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
spi: sun4i: fix FIFO limit
spi: sunxi: fix transfer timeout
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
ext4: verify extent header depth
ecryptfs: don't allow mmap when the lower fs doesn't support it
Revert "ecryptfs: forbid opening files without mmap handler"
locks: use file_inode()
power_supply: power_supply_read_temp only if use_cnt > 0
cgroup: set css->id to -1 during init
pinctrl: imx: Do not treat a PIN without MUX register as an error
pinctrl: single: Fix missing flush of posted write for a wakeirq
pvclock: Add CPU barriers to get correct version value
Input: tsc200x - report proper input_dev name
Input: xpad - validate USB endpoint count during probe
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
Input: elantech - add more IC body types to the list
Input: vmmouse - remove port reservation
ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
ALSA: timer: Fix leak in events via snd_timer_user_ccallback
ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS
xenbus: don't bail early from xenbus_dev_request_and_reply()
xenbus: don't BUG() on user mode induced condition
xen/pciback: Fix conf_space read/write overlap check.
ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)
arc: unwind: warn only once if DW2_UNWIND is disabled
kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w
pps: do not crash when failed to register
vmlinux.lds: account for destructor sections
mm, meminit: ensure node is online before checking whether pages are uninitialised
mm, meminit: always return a valid node from early_pfn_to_nid
mm, compaction: prevent VM_BUG_ON when terminating freeing scanner
fs/nilfs2: fix potential underflow in call to crc32_le
mm, compaction: abort free scanner if split fails
mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
dmaengine: at_xdmac: double FIFO flush needed to compute residue
dmaengine: at_xdmac: fix residue corruption
dmaengine: at_xdmac: align descriptors on 64 bits
x86/quirks: Add early quirk to reset Apple AirPort card
x86/quirks: Reintroduce scanning of secondary buses
x86/quirks: Apply nvidia_bugs quirk only on root bus
USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
Conflicts:
arch/arm/kernel/topology.c
arch/arm64/include/asm/arch_gicv3.h
arch/arm64/kernel/topology.c
block/bio.c
drivers/cpufreq/Kconfig
drivers/md/Makefile
drivers/media/dvb-core/dvb_ringbuffer.c
drivers/media/tuners/tuner-xc2028.c
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/mmc/core/host.c
drivers/scsi/ufs/ufshcd.c
drivers/scsi/ufs/ufshcd.h
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/configfs.c
fs/ecryptfs/file.c
include/linux/mmc/core.h
include/linux/mmc/host.h
include/linux/mmzone.h
include/linux/sched.h
include/linux/sched/sysctl.h
include/trace/events/power.h
include/trace/events/sched.h
init/Kconfig
kernel/cpuset.c
kernel/exit.c
kernel/sched/Makefile
kernel/sched/core.c
kernel/sched/cputime.c
kernel/sched/fair.c
kernel/sched/features.h
kernel/sched/rt.c
kernel/sched/sched.h
kernel/sched/stop_task.c
kernel/sched/tune.c
lib/Kconfig.debug
mm/Makefile
mm/vmstat.c
Change-Id: I243a43231ca56a6362076fa6301827e1b0493be5
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
|
|
To support task performance boosting, the usage of a single knob has the
advantage to be a simple solution, both from the implementation and the
usability standpoint. However, on a real system it can be difficult to
identify a single value for the knob which fits the needs of multiple
different tasks. For example, some kernel threads and/or user-space
background services should be better managed the "standard" way while we
still want to be able to boost the performance of specific workloads.
In order to improve the flexibility of the task boosting mechanism this
patch is the first of a small series which extends the previous
implementation to introduce a "per task group" support.
This first patch introduces just the basic CGroups support, a new
"schedtune" CGroups controller is added which allows to configure
different boost value for different groups of tasks.
To keep the implementation simple but still effective for a boosting
strategy, the new controller:
1. allows only a two layer hierarchy
2. supports only a limited number of boost groups
A two layer hierarchy allows to place each task either:
a) in the root control group
thus being subject to a system-wide boosting value
b) in a child of the root group
thus being subject to the specific boost value defined by that
"boost group"
The limited number of "boost groups" supported is mainly motivated by
the observation that in a real system it could be useful to have only
few classes of tasks which deserve different treatment.
For example, background vs foreground or interactive vs low-priority.
As an additional benefit, a limited number of boost groups allows also
to have a simpler implementation especially for the code required to
compute the boost value for CPUs which have runnable tasks belonging to
different boost groups.
Change-Id: I1304e33a8440bfdad9c8bcf8129ff390216f2e32
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Git-commit: 13001f47c9a610705219700af4636386b647e231
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
The current (CFS) scheduler implementation does not allow "to boost"
tasks performance by running them at a higher OPP compared to the
minimum required to meet their workload demands.
To support tasks performance boosting the scheduler should provide a
"knob" which allows to tune how much the system is going to be optimised
for energy efficiency vs performance.
This patch is the first of a series which provides a simple interface to
define a tuning knob. One system-wide "boost" tunable is exposed via:
/proc/sys/kernel/sched_cfs_boost
which can be configured in the range [0..100], to define a percentage
where:
- 0% boost requires to operate in "standard" mode by scheduling
tasks at the minimum capacities required by the workload demand
- 100% boost requires to push at maximum the task performances,
"regardless" of the incurred energy consumption
A boost value in between these two boundaries is used to bias the
power/performance trade-off, the higher the boost value the more the
scheduler is biased toward performance boosting instead of energy
efficiency.
Change-Id: I59a41725e2d8f9238a61dfb0c909071b53560fc0
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Git-commit: 63c8fad2b06805ef88f1220551289f0a3c3529f1
Git-repo: https://source.codeaurora.org/quic/la/kernel/msm-4.4
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
Move core control from out-of-tree module into the kernel proper.
Core control monitors load on CPUs and controls how many CPUs are
available for the system to use at any point in time. This can help save
power. Core control can be configured through sysfs interface.
Change-Id: Ia78e701468ea3828195c2a15c9cf9fafd099804a
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
|
|
use a window based view of time in order to track task
demand and CPU utilization in the scheduler.
Window Assisted Load Tracking (WALT) implementation credits:
Srivatsa Vaddagiri, Steve Muckle, Syed Rameez Mustafa, Joonwoo Park,
Pavan Kumar Kondeti, Olav Haugan
2016-03-06: Integration with EAS/refactoring by Vikram Mulukutla
and Todd Kjos
Change-Id: I21408236836625d4e7d7de1843d20ed5ff36c708
Includes fixes for issues:
eas/walt: Use walt_ktime_clock() instead of ktime_get_ns() to avoid a
race resulting in watchdog resets
BUG: 29353986
Change-Id: Ic1820e22a136f7c7ebd6f42e15f14d470f6bbbdb
Handle walt accounting anomoly during resume
During resume, there is a corner case where on wakeup, a task's
prev_runnable_sum can go negative. This is a workaround that
fixes the condition and warns (instead of crashing).
BUG: 29464099
Change-Id: I173e7874324b31a3584435530281708145773508
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Currently the build for a single-core (e.g. user-mode) Linux is broken
and this configuration is required (at least) to run some network tests.
The main issues for the current code support on single-core systems are:
1. {se,rq}::sched_avg is not available nor maintained for !SMP systems
This means that load and utilisation signals are NOT available in single
core systems. All the EAS code depends on these signals.
2. sched_group_energy is also SMP dependant. Again this means that all the
EAS setup and preparation code (energyn model initialization) has to be
properly guarded/disabled for !SMP systems.
3. SchedFreq depends on utilization signal, which is not available on
!SMP systems.
4. SchedTune is useless on unicore systems if SchedFreq is not available.
5. WALT machinery is not required on single-core systems.
This patch addresses all these issues by enforcing some constraints for
single-core systems:
a) WALT, SchedTune and SchedTune are now dependant on SMP
b) The default governor for !SMP systems is INTERACTIVE
c) The energy model initialisation/build functions are
d) Other minor code re-arrangements and CONFIG_SMP guarding to enable
single core builds.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
To support task performance boosting, the usage of a single knob has the
advantage to be a simple solution, both from the implementation and the
usability standpoint. However, on a real system it can be difficult to
identify a single value for the knob which fits the needs of multiple
different tasks. For example, some kernel threads and/or user-space
background services should be better managed the "standard" way while we
still want to be able to boost the performance of specific workloads.
In order to improve the flexibility of the task boosting mechanism this
patch is the first of a small series which extends the previous
implementation to introduce a "per task group" support.
This first patch introduces just the basic CGroups support, a new
"schedtune" CGroups controller is added which allows to configure
different boost value for different groups of tasks.
To keep the implementation simple but still effective for a boosting
strategy, the new controller:
1. allows only a two layer hierarchy
2. supports only a limited number of boost groups
A two layer hierarchy allows to place each task either:
a) in the root control group
thus being subject to a system-wide boosting value
b) in a child of the root group
thus being subject to the specific boost value defined by that
"boost group"
The limited number of "boost groups" supported is mainly motivated by
the observation that in a real system it could be useful to have only
few classes of tasks which deserve different treatment.
For example, background vs foreground or interactive vs low-priority.
As an additional benefit, a limited number of boost groups allows also
to have a simpler implementation especially for the code required to
compute the boost value for CPUs which have runnable tasks belonging to
different boost groups.
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
The current (CFS) scheduler implementation does not allow "to boost"
tasks performance by running them at a higher OPP compared to the
minimum required to meet their workload demands.
To support tasks performance boosting the scheduler should provide a
"knob" which allows to tune how much the system is going to be optimised
for energy efficiency vs performance.
This patch is the first of a series which provides a simple interface to
define a tuning knob. One system-wide "boost" tunable is exposed via:
/proc/sys/kernel/sched_cfs_boost
which can be configured in the range [0..100], to define a percentage
where:
- 0% boost requires to operate in "standard" mode by scheduling
tasks at the minimum capacities required by the workload demand
- 100% boost requires to push at maximum the task performances,
"regardless" of the incurred energy consumption
A boost value in between these two boundaries is used to bias the
power/performance trade-off, the higher the boost value the more the
scheduler is biased toward performance boosting instead of energy
efficiency.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLUB allocator to catch any copies that may span objects. Includes a
redzone handling fix discovered by Michael Ellerman.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviwed-by: Laura Abbott <labbott@redhat.com>
(cherry picked from commit ed18adc1cdd00a5c55a20fbdaed4804660772281)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
|
|
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLAB allocator to catch any copies that may span objects.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
(cherry picked from commit 04385fc5e8fffed84425d909a783c0f0c587d847)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
|
|
There are CPUs that don't have an obvious low power mode exit latency
penalty. Add a new Kconfig CONFIG_SCHED_HMP_CSTATE_AWARE which controls
whether CPU C-state is used to guide task placement.
CRs-fixed: 1006303
Change-Id: Ie8dbab8e173c3a1842d922f4d1fbd8cc4221789c
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
|
|
Add a compile-time flag to enable or disable scheduler features for
HMP (heterogenous multi-processor) systems. Main feature deals with
optimizing task placement for best power/performance tradeoff.
Also extend features currently dependent on CONFIG_SCHED_FREQ_INPUT to
be enabled for CONFIG_HMP as well.
Change-Id: I03b3942709a80cc19f7b934a8089e1d84c14d72d
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed minor ifdefry conflict.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
|
|
Currently the full stop_machine() routine is only enabled on SMP if
module unloading is enabled, or if the CPUs are hotpluggable. This
leads to configurations where stop_machine() is broken as it will then
only run the callback on the local CPU with irqs disabled, and not stop
the other CPUs or run the callback on them.
For example, this breaks MTRR setup on x86 in certain configs since
ea8596bb2d8d379 ("kprobes/x86: Remove unused text_poke_smp() and
text_poke_smp_batch() functions") as the MTRR is only established on the
boot CPU.
This patch removes the Kconfig option for STOP_MACHINE and uses the SMP
and HOTPLUG_CPU config options to compile the correct stop_machine() for
the architecture, removing the false dependency on MODULE_UNLOAD in the
process.
Link: https://lkml.org/lkml/2014/10/8/124
References: https://bugs.freedesktop.org/show_bug.cgi?id=84794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Here is an implementation of a new system call, sys_membarrier(), which
executes a memory barrier on all threads running on the system. It is
implemented by calling synchronize_sched(). It can be used to
distribute the cost of user-space memory barriers asymmetrically by
transforming pairs of memory barriers into pairs consisting of
sys_membarrier() and a compiler barrier. For synchronization primitives
that distinguish between read-side and write-side (e.g. userspace RCU
[1], rwlocks), the read-side can be accelerated significantly by moving
the bulk of the memory barrier overhead to the write-side.
The existing applications of which I am aware that would be improved by
this system call are as follows:
* Through Userspace RCU library (http://urcu.so)
- DNS server (Knot DNS) https://www.knot-dns.cz/
- Network sniffer (http://netsniff-ng.org/)
- Distributed object storage (https://sheepdog.github.io/sheepdog/)
- User-space tracing (http://lttng.org)
- Network storage system (https://www.gluster.org/)
- Virtual routers (https://events.linuxfoundation.org/sites/events/files/slides/DPDK_RCU_0MQ.pdf)
- Financial software (https://lkml.org/lkml/2015/3/23/189)
Those projects use RCU in userspace to increase read-side speed and
scalability compared to locking. Especially in the case of RCU used by
libraries, sys_membarrier can speed up the read-side by moving the bulk of
the memory barrier cost to synchronize_rcu().
* Direct users of sys_membarrier
- core dotnet garbage collector (https://github.com/dotnet/coreclr/issues/198)
Microsoft core dotnet GC developers are planning to use the mprotect()
side-effect of issuing memory barriers through IPIs as a way to implement
Windows FlushProcessWriteBuffers() on Linux. They are referring to
sys_membarrier in their github thread, specifically stating that
sys_membarrier() is what they are looking for.
To explain the benefit of this scheme, let's introduce two example threads:
Thread A (non-frequent, e.g. executing liburcu synchronize_rcu())
Thread B (frequent, e.g. executing liburcu
rcu_read_lock()/rcu_read_unlock())
In a scheme where all smp_mb() in thread A are ordering memory accesses
with respect to smp_mb() present in Thread B, we can change each
smp_mb() within Thread A into calls to sys_membarrier() and each
smp_mb() within Thread B into compiler barriers "barrier()".
Before the change, we had, for each smp_mb() pairs:
Thread A Thread B
previous mem accesses previous mem accesses
smp_mb() smp_mb()
following mem accesses following mem accesses
After the change, these pairs become:
Thread A Thread B
prev mem accesses prev mem accesses
sys_membarrier() barrier()
follow mem accesses follow mem accesses
As we can see, there are two possible scenarios: either Thread B memory
accesses do not happen concurrently with Thread A accesses (1), or they
do (2).
1) Non-concurrent Thread A vs Thread B accesses:
Thread A Thread B
prev mem accesses
sys_membarrier()
follow mem accesses
prev mem accesses
barrier()
follow mem accesses
In this case, thread B accesses will be weakly ordered. This is OK,
because at that point, thread A is not particularly interested in
ordering them with respect to its own accesses.
2) Concurrent Thread A vs Thread B accesses
Thread A Thread B
prev mem accesses prev mem accesses
sys_membarrier() barrier()
follow mem accesses follow mem accesses
In this case, thread B accesses, which are ensured to be in program
order thanks to the compiler barrier, will be "upgraded" to full
smp_mb() by synchronize_sched().
* Benchmarks
On Intel Xeon E5405 (8 cores)
(one thread is calling sys_membarrier, the other 7 threads are busy
looping)
1000 non-expedited sys_membarrier calls in 33s =3D 33 milliseconds/call.
* User-space user of this system call: Userspace RCU library
Both the signal-based and the sys_membarrier userspace RCU schemes
permit us to remove the memory barrier from the userspace RCU
rcu_read_lock() and rcu_read_unlock() primitives, thus significantly
accelerating them. These memory barriers are replaced by compiler
barriers on the read-side, and all matching memory barriers on the
write-side are turned into an invocation of a memory barrier on all
active threads in the process. By letting the kernel perform this
synchronization rather than dumbly sending a signal to every process
threads (as we currently do), we diminish the number of unnecessary wake
ups and only issue the memory barriers on active threads. Non-running
threads do not need to execute such barrier anyway, because these are
implied by the scheduler context switches.
Results in liburcu:
Operations in 10s, 6 readers, 2 writers:
memory barriers in reader: 1701557485 reads, 2202847 writes
signal-based scheme: 9830061167 reads, 6700 writes
sys_membarrier: 9952759104 reads, 425 writes
sys_membarrier (dyn. check): 7970328887 reads, 425 writes
The dynamic sys_membarrier availability check adds some overhead to
the read-side compared to the signal-based scheme, but besides that,
sys_membarrier slightly outperforms the signal-based scheme. However,
this non-expedited sys_membarrier implementation has a much slower grace
period than signal and memory barrier schemes.
Besides diminishing the number of wake-ups, one major advantage of the
membarrier system call over the signal-based scheme is that it does not
need to reserve a signal. This plays much more nicely with libraries,
and with processes injected into for tracing purposes, for which we
cannot expect that signals will be unused by the application.
An expedited version of this system call can be added later on to speed
up the grace period. Its implementation will likely depend on reading
the cpu_curr()->mm without holding each CPU's rq lock.
This patch adds the system call to x86 and to asm-generic.
[1] http://urcu.so
membarrier(2) man page:
MEMBARRIER(2) Linux Programmer's Manual MEMBARRIER(2)
NAME
membarrier - issue memory barriers on a set of threads
SYNOPSIS
#include <linux/membarrier.h>
int membarrier(int cmd, int flags);
DESCRIPTION
The cmd argument is one of the following:
MEMBARRIER_CMD_QUERY
Query the set of supported commands. It returns a bitmask of
supported commands.
MEMBARRIER_CMD_SHARED
Execute a memory barrier on all threads running on the system.
Upon return from system call, the caller thread is ensured that
all running threads have passed through a state where all memory
accesses to user-space addresses match program order between
entry to and return from the system call (non-running threads
are de facto in such a state). This covers threads from all pro=E2=80=90
cesses running on the system. This command returns 0.
The flags argument needs to be 0. For future extensions.
All memory accesses performed in program order from each targeted
thread is guaranteed to be ordered with respect to sys_membarrier(). If
we use the semantic "barrier()" to represent a compiler barrier forcing
memory accesses to be performed in program order across the barrier,
and smp_mb() to represent explicit memory barriers forcing full memory
ordering across the barrier, we have the following ordering table for
each pair of barrier(), sys_membarrier() and smp_mb():
The pair ordering is detailed as (O: ordered, X: not ordered):
barrier() smp_mb() sys_membarrier()
barrier() X X O
smp_mb() X O O
sys_membarrier() O O O
RETURN VALUE
On success, these system calls return zero. On error, -1 is returned,
and errno is set appropriately. For a given command, with flags
argument set to 0, this system call is guaranteed to always return the
same value until reboot.
ERRORS
ENOSYS System call is not implemented.
EINVAL Invalid arguments.
Linux 2015-04-15 MEMBARRIER(2)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nicholas Miell <nmiell@comcast.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
|
|
Merge patch-bomb from Andrew Morton:
- a few misc things
- Andy's "ambient capabilities"
- fs/nofity updates
- the ocfs2 queue
- kernel/watchdog.c updates and feature work.
- some of MM. Includes Andrea's userfaultfd feature.
[ Hadn't noticed that userfaultfd was 'default y' when applying the
patches, so that got fixed in this merge instead. We do _not_ mark
new features that nobody uses yet 'default y' - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm/hugetlb.c: make vma_has_reserves() return bool
mm/madvise.c: make madvise_behaviour_valid() return bool
mm/memory.c: make tlb_next_batch() return bool
mm/dmapool.c: change is_page_busy() return from int to bool
mm: remove struct node_active_region
mremap: simplify the "overlap" check in mremap_to()
mremap: don't do uneccesary checks if new_len == old_len
mremap: don't do mm_populate(new_addr) on failure
mm: move ->mremap() from file_operations to vm_operations_struct
mremap: don't leak new_vma if f_op->mremap() fails
mm/hugetlb.c: make vma_shareable() return bool
mm: make GUP handle pfn mapping unless FOLL_GET is requested
mm: fix status code which move_pages() returns for zero page
mm: memcontrol: bring back the VM_BUG_ON() in mem_cgroup_swapout()
genalloc: add support of multiple gen_pools per device
genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()
mm/memblock: WARN_ON when nid differs from overlap region
Documentation/features/vm: add feature description and arch support status for batched TLB flush after unmap
mm: defer flush of writable TLB entries
mm: send one IPI per CPU to TLB flush all entries after unmapping pages
...
|
|
An IPI is sent to flush remote TLBs when a page is unmapped that was
potentially accesssed by other CPUs. There are many circumstances where
this happens but the obvious one is kswapd reclaiming pages belonging to a
running process as kswapd and the task are likely running on separate
CPUs.
On small machines, this is not a significant problem but as machine gets
larger with more cores and more memory, the cost of these IPIs can be
high. This patch uses a simple structure that tracks CPUs that
potentially have TLB entries for pages being unmapped. When the unmapping
is complete, the full TLB is flushed on the assumption that a refill cost
is lower than flushing individual entries.
Architectures wishing to do this must give the following guarantee.
If a clean page is unmapped and not immediately flushed, the
architecture must guarantee that a write to that linear address
from a CPU with a cached TLB entry will trap a page fault.
This is essentially what the kernel already depends on but the window is
much larger with this patch applied and is worth highlighting. The
architecture should consider whether the cost of the full TLB flush is
higher than sending an IPI to flush each individual entry. An additional
architecture helper called flush_tlb_local is required. It's a trivial
wrapper with some accounting in the x86 case.
The impact of this patch depends on the workload as measuring any benefit
requires both mapped pages co-located on the LRU and memory pressure. The
case with the biggest impact is multiple processes reading mapped pages
taken from the vm-scalability test suite. The test case uses NR_CPU
readers of mapped files that consume 10*RAM.
Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%)
Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%)
Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 581.00 611.43
System 5804.93 4111.76
Elapsed 161.03 122.12
This is showing that the readers completed 24.40% faster with 29% less
system CPU time. From vmstats, it is known that the vanilla kernel was
interrupted roughly 900K times per second during the steady phase of the
test and the patched kernel was interrupts 180K times per second.
The impact is lower on a single socket machine.
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%)
Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%)
Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 58.09 57.64
System 111.82 76.56
Elapsed 27.29 22.55
It's still a noticeable improvement with vmstat showing interrupts went
from roughly 500K per second to 45K per second.
The patch will have no impact on workloads with no memory pressure or have
relatively few mapped pages. It will have an unpredictable impact on the
workload running on the CPU being flushed as it'll depend on how many TLB
entries need to be refilled and how long that takes. Worst case, the TLB
will be completely cleared of active entries when the target PFNs were not
resident at all.
[sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This allows to select the userfaultfd during configuration to build it.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- a new PIDs controller is added. It turns out that PIDs are actually
an independent resource from kmem due to the limited PID space.
- more core preparations for the v2 interface. Once cpu side interface
is settled, it should be ready for lifting the devel mask.
for-4.3-unified-base was temporarily branched so that other trees
(block) can pull cgroup core changes that blkcg changes depend on.
- a non-critical idr_preload usage bug fix.
* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: pids: fix invalid get/put usage
cgroup: introduce cgroup_subsys->legacy_name
cgroup: don't print subsystems for the default hierarchy
cgroup: make cftype->private a unsigned long
cgroup: export cgrp_dfl_root
cgroup: define controller file conventions
cgroup: fix idr_preload usage
cgroup: add documentation for the PIDs controller
cgroup: implement the PIDs subsystem
cgroup: allow a cgroup subsystem to reject a fork
|
|
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional
user of percpu_rw_semaphore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
The revised sign-file program is no longer a script that wraps the openssl
program, but now rather a program that makes use of OpenSSL's crypto
library. This means that to build the sign-file program, the kernel build
process now has a dependency on the OpenSSL development packages in
addition to OpenSSL itself.
Document this in Kconfig and in module-signing.txt.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
Let the user explicitly provide a file containing trusted keys, instead of
just automatically finding files matching *.x509 in the build tree and
trusting whatever we find. This really ought to be an *explicit*
configuration, and the build rules for dealing with the files were
fairly painful too.
Fix applied from James Morris that removes an '=' from a macro definition
in kernel/Makefile as this is a feature that only exists from GNU make 3.82
onwards.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The current rule for generating signing_key.priv and signing_key.x509 is
a classic example of a bad rule which has a tendency to break parallel
make. When invoked to create *either* target, it generates the other
target as a side-effect that make didn't predict.
So let's switch to using a single file signing_key.pem which contains
both key and certificate. That matches what we do in the case of an
external key specified by CONFIG_MODULE_SIG_KEY anyway, so it's also
slightly cleaner.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Where an external PEM file or PKCS#11 URI is given, we can get the cert
from it for ourselves instead of making the user drop signing_key.x509
in place for us.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Extract the function that drives the PKCS#7 signature verification given a
data blob and a PKCS#7 blob out from the module signing code and lump it with
the system keyring code as it's generic. This makes it independent of module
config options and opens it to use by the firmware loader.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Kyle McMartin <kyle@kernel.org>
|
|
Move to using PKCS#7 messages as module signatures because:
(1) We have to be able to support the use of X.509 certificates that don't
have a subjKeyId set. We're currently relying on this to look up the
X.509 certificate in the trusted keyring list.
(2) PKCS#7 message signed information blocks have a field that supplies the
data required to match with the X.509 certificate that signed it.
(3) The PKCS#7 certificate carries fields that specify the digest algorithm
used to generate the signature in a standardised way and the X.509
certificates specify the public key algorithm in a standardised way - so
we don't need our own methods of specifying these.
(4) We now have PKCS#7 message support in the kernel for signed kexec purposes
and we can make use of this.
To make this work, the old sign-file script has been replaced with a program
that needs compiling in a previous patch. The rules to build it are added
here.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
|
|
This commit prevents Kconfig from asking the user about RCU_NOCB_CPU
unless the user really wants to be asked.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Adds a new single-purpose PIDs subsystem to limit the number of
tasks that can be forked inside a cgroup. Essentially this is an
implementation of RLIMIT_NPROC that applies to a cgroup rather than a
process tree.
However, it should be noted that organisational operations (adding and
removing tasks from a PIDs hierarchy) will *not* be prevented. Rather,
the number of tasks in the hierarchy cannot exceed the limit through
forking. This is due to the fact that, in the unified hierarchy, attach
cannot fail (and it is not possible for a task to overcome its PIDs
cgroup policy limit by attaching to a child cgroup -- even if migrating
mid-fork it must be able to fork in the parent first).
PIDs are fundamentally a global resource, and it is possible to reach
PID exhaustion inside a cgroup without hitting any reasonable kmemcg
policy. Once you've hit PID exhaustion, you're only in a marginally
better state than OOM. This subsystem allows PID exhaustion inside a
cgroup to be prevented.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The RCU_USER_QS Kconfig parameter is now just a synonym for NO_HZ_FULL,
so this commit eliminates RCU_USER_QS, replacing all uses with NO_HZ_FULL.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Debug info and other statistics fixes and related enhancements"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/numa: Fix numa balancing stats in /proc/pid/sched
sched/numa: Show numa_group ID in /proc/sched_debug task listings
sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h
sched/stat: Expose /proc/pid/schedstat if CONFIG_SCHED_INFO=y
sched/stat: Simplify the sched_info accounting dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull max log buf size increase from Ingo Molnar:
"Ran into this limit recently, so increase it by an order of magnitude"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
printk: Increase maximum CONFIG_LOG_BUF_SHIFT from 21 to 25
|
|
Both CONFIG_SCHEDSTATS=y and CONFIG_TASK_DELAY_ACCT=y track task
sched_info, which results in ugly #if clauses.
Simplify the code by introducing a synthethic CONFIG_SCHED_INFO
switch, selected by both.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Cc: ricklind@us.ibm.com
Link: http://lkml.kernel.org/r/8d19eef800811a94b0f91bcbeb27430a884d7433.1435255405.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
|
|
So I tried to some kernel debugging that produced a ton of kernel messages
on a big box, and wanted to save them all: but CONFIG_LOG_BUF_SHIFT maxes
out at 21 (2 MB).
Increase it to 25 (32 MB).
This does not affect any existing config or defaults.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- threadgroup_lock got reorganized so that its users can pick the
actual locking mechanism to use. Its only user - cgroups - is
updated to use a percpu_rwsem instead of per-process rwsem.
This makes things a bit lighter on hot paths and allows cgroups to
perform and fail multi-task (a process) migrations atomically.
Multi-task migrations are used in several places including the
unified hierarchy.
- Delegation rule and documentation added to unified hierarchy. This
will likely be the last interface update from the cgroup core side
for unified hierarchy before lifting the devel mask.
- Some groundwork for the pids controller which is scheduled to be
merged in the coming devel cycle.
* 'for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add delegation section to unified hierarchy documentation
cgroup: require write perm on common ancestor when moving processes on the default hierarchy
cgroup: separate out cgroup_procs_write_permission() from __cgroup_procs_write()
kernfs: make kernfs_get_inode() public
MAINTAINERS: add a cgroup core co-maintainer
cgroup: fix uninitialised iterator in for_each_subsys_which
cgroup: replace explicit ss_mask checking with for_each_subsys_which
cgroup: use bitmask to filter for_each_subsys
cgroup: add seq_file forward declaration for struct cftype
cgroup: simplify threadgroup locking
sched, cgroup: replace signal_struct->group_rwsem with a global percpu_rwsem
sched, cgroup: reorganize threadgroup locking
cgroup: switch to unsigned long for bitmasks
cgroup: reorganize include/linux/cgroup.h
cgroup: separate out include/linux/cgroup-defs.h
cgroup: fix some comment typos
|
|
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
|
|
Commit 818411616baf ("fs, proc: introduce /proc/<pid>/task/<tid>/children
entry") introduced the children entry for checkpoint restore and the
file is only available on kernels configured with CONFIG_EXPERT and
CONFIG_CHECKPOINT_RESTORE.
This is available in most distributions (Fedora, Debian, Ubuntu, CoreOS)
because they usually enable CONFIG_EXPERT and CONFIG_CHECKPOINT_RESTORE.
But Arch does not enable CONFIG_EXPERT or CONFIG_CHECKPOINT_RESTORE.
However, the children proc file is useful outside of checkpoint restore.
I would like to use it in rkt. The rkt process exec() another program
it does not control, and that other program will fork()+exec() a child
process. I would like to find the pid of the child process from an
external tool without iterating in /proc over all processes to find
which one has a parent pid equal to rkt.
This commit introduces CONFIG_PROC_CHILDREN and makes
CONFIG_CHECKPOINT_RESTORE select it. This allows enabling
/proc/<pid>/task/<tid>/children without needing to enable
CONFIG_CHECKPOINT_RESTORE and CONFIG_EXPERT.
Alban tested that /proc/<pid>/task/<tid>/children is present when the
kernel is configured with CONFIG_PROC_CHILDREN=y but without
CONFIG_CHECKPOINT_RESTORE
Signed-off-by: Iago López Galeiras <iago@endocode.com>
Tested-by: Alban Crequy <alban@endocode.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Djalal Harouni <djalal@endocode.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
|
|
Andreas turned this option on, only to find out Debian (and Ubuntu!)
don't enable support in their kmod builds.
Shorten the text, and suggest N at the bottom (at least for now).
Reported-by: Andreas Mohr <andim2@users.sf.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes mostly consist of work on x86 PMU drivers:
- x86 Intel PT (hardware CPU tracer) improvements (Alexander
Shishkin)
- x86 Intel CQM (cache quality monitoring) improvements (Thomas
Gleixner)
- x86 Intel PEBSv3 support (Peter Zijlstra)
- x86 Intel PEBS interrupt batching support for lower overhead
sampling (Zheng Yan, Kan Liang)
- x86 PMU scheduler fixes and improvements (Peter Zijlstra)
There's too many tooling improvements to list them all - here are a
few select highlights:
'perf bench':
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
'perf top', 'perf report':
- Allow disabling/enabling events dynamicaly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo)
- Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
perf.data files (Namhyung Kim)
'perf probe': (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Greatly speed up 'perf probe --list' by caching debuginfo.
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc.
'perf sched':
- Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)
Plus tons of infrastructure work - in particular preparation for
upcoming threaded perf report support, but also lots of other work -
and fixes and other improvements. See (much) more details in the
shortlog and in the git log"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits)
perf tools: Configurable per thread proc map processing time out
perf tools: Add time out to force stop proc map processing
perf report: Fix sort__sym_cmp to also compare end of symbol
perf hists browser: React to unassigned hotkey pressing
perf top: Tell the user how to unfreeze events after pressing 'f'
perf hists browser: Honour the help line provided by builtin-{top,report}.c
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
perf annotate: Rename source_line_percent to source_line_samples
perf annotate: Display total number of samples with --show-total-period
perf tools: Ensure thread-stack is flushed
perf top: Allow disabling/enabling events dynamicly
perf evlist: Add toggle_enable() method
perf trace: Fix race condition at the end of started workloads
perf probe: Speed up perf probe --list by caching debuginfo
perf probe: Show usage even if the last event is skipped
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
perf tools: Fix a problem when opening old perf.data with different byte order
perf tools: Ignore .config-detected in .gitignore
perf probe: Fix to return error if no probe is added
...
|
|
cgroup writeback requires support from both bdi and filesystem sides.
Add BDI_CAP_CGROUP_WRITEBACK and FS_CGROUP_WRITEBACK to indicate
support and enable BDI_CAP_CGROUP_WRITEBACK on block based bdi's by
default. Also, define CONFIG_CGROUP_WRITEBACK which is enabled if
both MEMCG and BLK_CGROUP are enabled.
inode_cgwb_enabled() which determines whether a given inode's both bdi
and fs support cgroup writeback is added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Andrew worried about the overhead on small systems; only use the fancy
code when either perf or tracing is enabled.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The RCU implementation is chosen based on PREEMPT and SMP config options
and is not really a user-selectable choice. This commit removes the
menu entry, given that there is not much point in calling something a
choice when there is in fact no choice.. The TINY_RCU, TREE_RCU, and
PREEMPT_RCU Kconfig options continue to be selected based solely on the
values of the PREEMPT and SMP options.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit updates the initialization of the kthread_prio boot parameter
so that RCU will build even when CONFIG_RCU_KTHREAD_PRIO is undefined.
The kthread_prio boot parameter is set to CONFIG_RCU_KTHREAD_PRIO if
that is defined, otherwise to 1 if CONFIG_RCU_BOOST is defined and
to zero otherwise. This commit then makes CONFIG_RCU_KTHREAD_PRIO
depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_KTHREAD_PRIO unless they want to be.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
|
|
This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so
that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined.
The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF
when defined, otherwise it is set to 32 for 32-bit systems and 64 for
64-bit systems. This commit then makes CONFIG_RCU_FANOUT_LEAF depend
on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_FANOUT_LEAF unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
|
|
This commit introduces an RCU_FANOUT C-preprocessor macro so that RCU will
build even when CONFIG_RCU_FANOUT is undefined. The RCU_FANOUT macro is
set to the value of CONFIG_RCU_FANOUT when defined, otherwise it is set
to 32 for 32-bit systems and 64 for 64-bit systems. This commit then
makes CONFIG_RCU_FANOUT depend on CONFIG_RCU_EXPERT, so that Kconfig
users won't be asked about CONFIG_RCU_FANOUT unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
|
|
RCU_FANOUT_LEAF's range and default values depend on the value of
RCU_FANOUT, which at the time seemed like a cute way to save two lines
of Kconfig code. However, adding a dependency from both of these
Kconfig parameters on RCU_EXPERT requires that RCU_FANOUT_LEAF operate
correctly even if RCU_FANOUT is undefined. This commit therefore
allows RCU_FANOUT_LEAF to take on the full range of permitted values,
even in cases where RCU_FANOUT is undefined.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Eliminate redundant "default" as suggested by Pranith Kumar. ]
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
|