| Age | Commit message (Collapse) | Author |
|---|
|
* v4.4-16.09-android-tmp:
unsafe_[get|put]_user: change interface to use a error target label
usercopy: remove page-spanning test for now
usercopy: fix overlap check for kernel text
mm/slub: support left redzone
Linux 4.4.21
lib/mpi: mpi_write_sgl(): fix skipping of leading zero limbs
regulator: anatop: allow regulator to be in bypass mode
hwrng: exynos - Disable runtime PM on probe failure
cpufreq: Fix GOV_LIMITS handling for the userspace governor
metag: Fix atomic_*_return inline asm constraints
scsi: fix upper bounds check of sense key in scsi_sense_key_string()
ALSA: timer: fix NULL pointer dereference on memory allocation failure
ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
ALSA: hda - Enable subwoofer on Dell Inspiron 7559
ALSA: hda - Add headset mic quirk for Dell Inspiron 5468
ALSA: rawmidi: Fix possible deadlock with virmidi registration
ALSA: fireworks: accessing to user space outside spinlock
ALSA: firewire-tascam: accessing to user space outside spinlock
ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114
crypto: caam - fix IV loading for authenc (giv)decryption
uprobes: Fix the memcg accounting
x86/apic: Do not init irq remapping if ioapic is disabled
vhost/scsi: fix reuse of &vq->iov[out] in response
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
ubifs: Fix assertion in layout_in_gaps()
ovl: fix workdir creation
ovl: listxattr: use strnlen()
ovl: remove posix_acl_default from workdir
ovl: don't copy up opaqueness
wrappers for ->i_mutex access
lustre: remove unused declaration
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
timekeeping: Cap array access in timekeeping_debug
xfs: fix superblock inprogress check
ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
drm/msm: fix use of copy_from_user() while holding spinlock
drm: Reject page_flip for !DRIVER_MODESET
drm/radeon: fix radeon_move_blit on 32bit systems
s390/sclp_ctl: fix potential information leak with /dev/sclp
rds: fix an infoleak in rds_inc_info_copy
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
nvme: Call pci_disable_device on the error path.
cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
block: make sure a big bio is split into at most 256 bvecs
block: Fix race triggered by blk_set_queue_dying()
ext4: avoid modifying checksum fields directly during checksum verification
ext4: avoid deadlock when expanding inode size
ext4: properly align shifted xattrs when expanding inodes
ext4: fix xattr shifting when expanding inodes part 2
ext4: fix xattr shifting when expanding inodes
ext4: validate that metadata blocks do not overlap superblock
net: Use ns_capable_noaudit() when determining net sysctl permissions
kernel: Add noaudit variant of ns_capable()
KEYS: Fix ASN.1 indefinite length object parsing
drivers:hv: Lock access to hyperv_mmio resource tree
cxlflash: Move to exponential back-off when cmd_room is not available
netfilter: x_tables: check for size overflow
drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
IB/IPoIB: Do not set skb truesize since using one linearskb
udp: properly support MSG_PEEK with truncated buffers
crypto: nx-842 - Mask XERS0 bit in return value
cxlflash: Fix to avoid virtual LUN failover failure
cxlflash: Fix to escalate LINK_RESET also on port 1
tipc: fix nl compat regression for link statistics
tipc: fix an infoleak in tipc_nl_compat_link_dump
netfilter: x_tables: check for size overflow
Bluetooth: Add support for Intel Bluetooth device 8265 [8087:0a2b]
drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV
drm/i915: Only ignore eDP ports that are connected
Input: xpad - move pending clear to the correct location
net: thunderx: Fix link status reporting
x86/hyperv: Avoid reporting bogus NMI status for Gen2 instances
crypto: vmx - IV size failing on skcipher API
tda10071: Fix dependency to REGMAP_I2C
crypto: vmx - Fix ABI detection
crypto: vmx - comply with ABIs that specify vrsave as reserved.
HID: core: prevent out-of-bound readings
lpfc: Fix DMA faults observed upon plugging loopback connector
block: fix blk_rq_get_max_sectors for driver private requests
irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
clocksource: Allow unregistering the watchdog
btrfs: Continue write in case of can_not_nocow
blk-mq: End unstarted requests on dying queue
cxlflash: Fix to resolve dead-lock during EEH recovery
drm/radeon/mst: fix regression in lane/link handling.
ecryptfs: fix handling of directory opening
ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps
drm: Balance error path for GEM handle allocation
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
time: Verify time values in adjtimex ADJ_SETOFFSET to avoid overflow
Input: xpad - correctly handle concurrent LED and FF requests
net: thunderx: Fix receive packet stats
net: thunderx: Fix for multiqset not configured upon interface toggle
perf/x86/cqm: Fix CQM memory leak and notifier leak
perf/x86/cqm: Fix CQM handling of grouping events into a cache_group
s390/crypto: provide correct file mode at device register.
proc: revert /proc/<pid>/maps [stack:TID] annotation
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
cxlflash: Fix to avoid unnecessary scan with internal LUNs
Drivers: hv: vmbus: don't manipulate with clocksources on crash
Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()
Drivers: hv: vmbus: avoid infinite loop in init_vp_index()
arcmsr: fixes not release allocated resource
arcmsr: fixed getting wrong configuration data
s390/pci_dma: fix DMA table corruption with > 4 TB main memory
net/mlx5e: Don't modify CQ before it was created
net/mlx5e: Don't try to modify CQ moderation if it is not supported
mmc: sdhci: Do not BUG on invalid vdd
UVC: Add support for R200 depth camera
sched/numa: Fix use-after-free bug in the task_numa_compare
ALSA: hda - add codec support for Kabylake display audio codec
drm/i915: Fix hpd live status bits for g4x
tipc: fix nullptr crash during subscription cancel
arm64: Add workaround for Cavium erratum 27456
net: thunderx: Fix for Qset error due to CQ full
drm/radeon: fix dp link rate selection (v2)
drm/amdgpu: fix dp link rate selection (v2)
qla2xxx: Use ATIO type to send correct tmr response
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
drm/atomic: Do not unset crtc when an encoder is stolen
drm/i915/skl: Add missing SKL ids
drm/i915/bxt: update list of PCIIDs
hrtimer: Catch illegal clockids
i40e/i40evf: Fix RSS rx-flow-hash configuration through ethtool
mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO.
mpt3sas: A correction in unmap_resources
net: cavium: liquidio: fix check for in progress flag
arm64: KVM: Configure TCR_EL2.PS at runtime
irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor
pwm: lpc32xx: fix and simplify duty cycle and period calculations
pwm: lpc32xx: correct number of PWM channels from 2 to 1
pwm: fsl-ftm: Fix clock enable/disable when using PM
megaraid_sas: Add an i/o barrier
megaraid_sas: Fix SMAP issue
megaraid_sas: Do not allow PCI access during OCR
s390/cio: update measurement characteristics
s390/cio: ensure consistent measurement state
s390/cio: fix measurement characteristics memleak
qeth: initialize net_device with carrier off
lpfc: Fix external loopback failure.
lpfc: Fix mbox reuse in PLOGI completion
lpfc: Fix RDP Speed reporting.
lpfc: Fix crash in fcp command completion path.
lpfc: Fix driver crash when module parameter lpfc_fcp_io_channel set to 16
lpfc: Fix RegLogin failed error seen on Lancer FC during port bounce
lpfc: Fix the FLOGI discovery logic to comply with T11 standards
lpfc: Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get.
cxl: Enable PCI device ID for future IBM CXL adapter
cxl: fix build for GCC 4.6.x
cxlflash: Enable device id for future IBM CXL adapter
cxlflash: Resolve oops in wait_port_offline
cxlflash: Fix to resolve cmd leak after host reset
cxl: Fix DSI misses when the context owning task exits
cxl: Fix possible idr warning when contexts are released
Drivers: hv: vmbus: fix rescind-offer handling for device without a driver
Drivers: hv: vmbus: serialize process_chn_event() and vmbus_close_internal()
Drivers: hv: vss: run only on supported host versions
drivers/hv: cleanup synic msrs if vmbus connect failed
Drivers: hv: util: catch allocation errors
tools: hv: report ENOSPC errors in hv_fcopy_daemon
Drivers: hv: utils: run polling callback always in interrupt context
Drivers: hv: util: Increase the timeout for util services
lightnvm: fix missing grown bad block type
lightnvm: fix locking and mempool in rrpc_lun_gc
lightnvm: unlock rq and free ppa_list on submission fail
lightnvm: add check after mempool allocation
lightnvm: fix incorrect nr_free_blocks stat
lightnvm: fix bio submission issue
cxlflash: a couple off by one bugs
fm10k: Cleanup exception handling for mailbox interrupt
fm10k: Cleanup MSI-X interrupts in case of failure
fm10k: reinitialize queuing scheme after calling init_hw
fm10k: always check init_hw for errors
fm10k: reset max_queues on init_hw_vf failure
fm10k: Fix handling of NAPI budget when multiple queues are enabled per vector
fm10k: Correct MTU for jumbo frames
fm10k: do not assume VF always has 1 queue
clk: xgene: Fix divider with non-zero shift value
e1000e: fix division by zero on jumbo MTUs
e1000: fix data race between tx_ring->next_to_clean
ixgbe: Fix handling of NAPI budget when multiple queues are enabled per vector
igb: fix NULL derefs due to skipped SR-IOV enabling
igb: use the correct i210 register for EEMNGCTL
igb: don't unmap NULL hw_addr
i40e: Fix Rx hash reported to the stack by our driver
i40e: clean whole mac filter list
i40evf: check rings before freeing resources
i40e: don't add zero MAC filter
i40e: properly delete VF MAC filters
i40e: Fix memory leaks, sideband filter programming
i40e: fix: do not sleep in netdev_ops
i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaround
i40evf: handle many MAC filters correctly
i40e: Workaround fix for mss < 256 issue
UPSTREAM: audit: fix a double fetch in audit_log_single_execve_arg()
UPSTREAM: ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
FIXUP: sched/tune: update accouting before CPU capacity
FIXUP: sched/tune: add fixes missing from a previous patch
arm: Fix #if/#ifdef typo in topology.c
arm: Fix build error "conflicting types for 'scale_cpu_capacity'"
sched/walt: use do_div instead of division operator
DEBUG: cpufreq: fix cpu_capacity tracing build for non-smp systems
sched/walt: include missing header for arm_timer_read_counter()
cpufreq: Kconfig: Fixup incorrect selection by CPU_FREQ_DEFAULT_GOV_SCHED
sched/fair: Avoid redundant idle_cpu() call in update_sg_lb_stats()
FIXUP: sched: scheduler-driven cpu frequency selection
sched/rt: Add Kconfig option to enable panicking for RT throttling
sched/rt: print RT tasks when RT throttling is activated
UPSTREAM: sched: Fix a race between __kthread_bind() and sched_setaffinity()
sched/fair: Favor higher cpus only for boosted tasks
vmstat: make vmstat_updater deferrable again and shut down on idle
sched/fair: call OPP update when going idle after migration
sched/cpufreq_sched: fix thermal capping events
sched/fair: Picking cpus with low OPPs for tasks that prefer idle CPUs
FIXUP: sched/tune: do initialization as a postcore_initicall
DEBUG: sched: add tracepoint for RD overutilized
sched/tune: Introducing a new schedtune attribute prefer_idle
sched: use util instead of capacity to select busy cpu
arch_timer: add error handling when the MPM global timer is cleared
FIXUP: sched: Fix double-release of spinlock in move_queued_task
FIXUP: sched/fair: Fix hang during suspend in sched_group_energy
FIXUP: sched: fix SchedFreq integration for both PELT and WALT
sched: EAS: Avoid causing spikes to max-freq unnecessarily
FIXUP: sched: fix set_cfs_cpu_capacity when WALT is in use
sched/walt: Accounting for number of irqs pending on each core
sched: Introduce Window Assisted Load Tracking (WALT)
sched/tune: fix PB and PC cuts indexes definition
sched/fair: optimize idle cpu selection for boosted tasks
FIXUP: sched/tune: fix accounting for runnable tasks
sched/tune: use a single initialisation function
sched/{fair,tune}: simplify fair.c code
FIXUP: sched/tune: fix payoff calculation for boost region
sched/tune: Add support for negative boost values
FIX: sched/tune: move schedtune_nornalize_energy into fair.c
FIX: sched/tune: update usage of boosted task utilisation on CPU selection
sched/fair: add tunable to set initial task load
sched/fair: add tunable to force selection at cpu granularity
sched: EAS: take cstate into account when selecting idle core
sched/cpufreq_sched: Consolidated update
FIXUP: sched: fix build for non-SMP target
DEBUG: sched/tune: add tracepoint on P-E space filtering
DEBUG: sched/tune: add tracepoint for energy_diff() values
DEBUG: sched/tune: add tracepoint for task boost signal
arm: topology: Define TC2 energy and provide it to the scheduler
CHROMIUM: sched: update the average of nr_running
DEBUG: schedtune: add tracepoint for schedtune_tasks_update() values
DEBUG: schedtune: add tracepoint for CPU boost signal
DEBUG: schedtune: add tracepoint for SchedTune configuration update
DEBUG: sched: add energy procfs interface
DEBUG: sched,cpufreq: add cpu_capacity change tracepoint
DEBUG: sched: add tracepoint for CPU load/util signals
DEBUG: sched: add tracepoint for task load/util signals
DEBUG: sched: add tracepoint for cpu/freq scale invariance
sched/fair: filter energy_diff() based on energy_payoff value
sched/tune: add support to compute normalized energy
sched/fair: keep track of energy/capacity variations
sched/fair: add boosted task utilization
sched/{fair,tune}: track RUNNABLE tasks impact on per CPU boost value
sched/tune: compute and keep track of per CPU boost value
sched/tune: add initial support for CGroups based boosting
sched/fair: add boosted CPU usage
sched/fair: add function to convert boost value into "margin"
sched/tune: add sysctl interface to define a boost value
sched/tune: add detailed documentation
fixup! sched/fair: jump to max OPP when crossing UP threshold
fixup! sched: scheduler-driven cpu frequency selection
sched: rt scheduler sets capacity requirement
sched: deadline: use deadline bandwidth in scale_rt_capacity
sched: remove call of sched_avg_update from sched_rt_avg_update
sched/cpufreq_sched: add trace events
sched/fair: jump to max OPP when crossing UP threshold
sched/fair: cpufreq_sched triggers for load balancing
sched/{core,fair}: trigger OPP change request on fork()
sched/fair: add triggers for OPP change requests
sched: scheduler-driven cpu frequency selection
cpufreq: introduce cpufreq_driver_is_slow
sched: Consider misfit tasks when load-balancing
sched: Add group_misfit_task load-balance type
sched: Add per-cpu max capacity to sched_group_capacity
sched: Do eas idle balance regardless of the rq avg idle value
arm64: Enable max freq invariant scheduler load-tracking and capacity support
arm: Enable max freq invariant scheduler load-tracking and capacity support
sched: Update max cpu capacity in case of max frequency constraints
cpufreq: Max freq invariant scheduler load-tracking and cpu capacity support
arm64, topology: Updates to use DT bindings for EAS costing data
sched: Support for extracting EAS energy costs from DT
Documentation: DT bindings for energy model cost data required by EAS
sched: Disable energy-unfriendly nohz kicks
sched: Consider a not over-utilized energy-aware system as balanced
sched: Energy-aware wake-up task placement
sched: Determine the current sched_group idle-state
sched, cpuidle: Track cpuidle state index in the scheduler
sched: Add over-utilization/tipping point indicator
sched: Estimate energy impact of scheduling decisions
sched: Extend sched_group_energy to test load-balancing decisions
sched: Calculate energy consumption of sched_group
sched: Highest energy aware balancing sched_domain level pointer
sched: Relocated cpu_util() and change return type
sched: Compute cpu capacity available at current frequency
arm64: Cpu invariant scheduler load-tracking and capacity support
arm: Cpu invariant scheduler load-tracking and capacity support
sched: Introduce SD_SHARE_CAP_STATES sched_domain flag
sched: Initialize energy data structures
sched: Introduce energy data structures
sched: Make energy awareness a sched feature
sched: Documentation for scheduler energy cost model
sched: Prevent unnecessary active balance of single task in sched group
sched: Enable idle balance to pull single task towards cpu with higher capacity
sched: Consider spare cpu capacity at task wake-up
sched: Add cpu capacity awareness to wakeup balancing
sched: Store system-wide maximum cpu capacity in root domain
arm: Update arch_scale_cpu_capacity() to reflect change to define
arm64: Enable frequency invariant scheduler load-tracking support
arm: Enable frequency invariant scheduler load-tracking support
cpufreq: Frequency invariant scheduler load-tracking support
sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()
FROMLIST: pstore: drop pmsg bounce buffer
UPSTREAM: usercopy: remove page-spanning test for now
UPSTREAM: usercopy: force check_object_size() inline
BACKPORT: usercopy: fold builtin_const check into inline function
UPSTREAM: x86/uaccess: force copy_*_user() to be inlined
UPSTREAM: HID: core: prevent out-of-bound readings
Android: Fix build breakages.
UPSTREAM: tty: Prevent ldisc drivers from re-using stale tty fields
UPSTREAM: netfilter: nfnetlink: correctly validate length of batch messages
cpuset: Make cpusets restore on hotplug
UPSTREAM: mm/slub: support left redzone
UPSTREAM: Make the hardened user-copy code depend on having a hardened allocator
Android: MMC/UFS IO Latency Histograms.
UPSTREAM: usercopy: fix overlap check for kernel text
UPSTREAM: usercopy: avoid potentially undefined behavior in pointer math
UPSTREAM: unsafe_[get|put]_user: change interface to use a error target label
BACKPORT: arm64: mm: fix location of _etext
BACKPORT: ARM: 8583/1: mm: fix location of _etext
BACKPORT: Don't show empty tag stats for unprivileged uids
UPSTREAM: tcp: fix use after free in tcp_xmit_retransmit_queue()
ANDROID: base-cfg: drop SECCOMP_FILTER config
UPSTREAM: [media] xc2028: unlock on error in xc2028_set_config()
UPSTREAM: [media] xc2028: avoid use after free
ANDROID: base-cfg: enable SECCOMP config
ANDROID: rcu_sync: Export rcu_sync_lockdep_assert
RFC: FROMLIST: cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
RFC: FROMLIST: cgroup: avoid synchronize_sched() in __cgroup_procs_write()
RFC: FROMLIST: locking/percpu-rwsem: Optimize readers and reduce global impact
net: ipv6: Fix ping to link-local addresses.
ipv6: fix endianness error in icmpv6_err
ANDROID: dm: android-verity: Allow android-verity to be compiled as an independent module
backporting: a brief introduce of backported feautures on 4.4
Linux 4.4.20
sysfs: correctly handle read offset on PREALLOC attrs
hwmon: (iio_hwmon) fix memory leak in name attribute
ALSA: line6: Fix POD sysfs attributes segfault
ALSA: line6: Give up on the lock while URBs are released.
ALSA: line6: Remove double line6_pcm_release() after failed acquire.
ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present
ACPI / sysfs: fix error code in get_status()
ACPI / drivers: replace acpi_probe_lock spinlock with mutex
ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
USB: serial: option: add WeTelecom 0x6802 and 0x6803 products
USB: serial: option: add WeTelecom WM-D200
USB: serial: mos7840: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
USB: fix typo in wMaxPacketSize validation
usb: chipidea: udc: don't touch DP when controller is in host mode
USB: avoid left shift by -1
dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
crypto: qat - fix aes-xts key sizes
crypto: nx - off by one bug in nx_of_update_msc()
Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
Input: i8042 - break load dependency between atkbd/psmouse and i8042
Input: tegra-kbc - fix inverted reset logic
btrfs: properly track when rescan worker is running
btrfs: waiting on qgroup rescan should not always be interruptible
fs/seq_file: fix out-of-bounds read
gpio: Fix OF build problem on UM
usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()
megaraid_sas: Fix probing cards without io port
mpt3sas: Fix resume on WarpDrive flash cards
cdc-acm: fix wrong pipe type on rx interrupt xfers
i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
aacraid: Check size values after double-fetch from user
ARC: Elide redundant setup of DMA callbacks
ARC: Call trace_hardirqs_on() before enabling irqs
ARC: use correct offset in pt_regs for saving/restoring user mode r25
ARC: build: Better way to detect ISA compatible toolchain
drm/i915: fix aliasing_ppgtt leak
drm/amdgpu: record error code when ring test failed
drm/amd/amdgpu: sdma resume fail during S4 on CI
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/amdgpu: Change GART offset to 64-bit
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
sched/nohz: Fix affine unpinned timers mess
sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
of: fix reference counting in of_graph_get_endpoint_by_regs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
mac80211: fix purging multicast PS buffer queue
s390/dasd: fix hanging device after clear subchannel
EDAC: Increment correct counter in edac_inc_ue_error()
pinctrl/amd: Remove the default de-bounce time
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Fix CMDQ error handling
iommu/dma: Don't put uninitialised IOVA domains
xhci: Make sure xhci handles USB_SPEED_SUPER_PLUS devices.
USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices
USB: serial: ftdi_sio: add device ID for WICED USB UART dev board
USB: serial: option: add support for Telit LE920A4
USB: serial: option: add D-Link DWM-156/A3
USB: serial: fix memleak in driver-registration error path
xhci: don't dereference a xhci member after removing xhci
usb: xhci: Fix panic if disconnect
xhci: always handle "Command Ring Stopped" events
usb/gadget: fix gadgetfs aio support.
usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
USB: validate wMaxPacketValue entries in endpoint descriptors
usb: renesas_usbhs: Use dmac only if the pipe type is bulk
usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()
USB: hub: change the locking in hub_activate
USB: hub: fix up early-exit pathway in hub_activate
usb: hub: Fix unbalanced reference count/memory leak/deadlocks
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices
usb: dwc3: gadget: increment request->actual once
usb: dwc3: pci: add Intel Kabylake PCI ID
usb: misc: usbtest: add fix for driver hang
usb: ehci: change order of register cleanup during shutdown
crypto: caam - defer aead_set_sh_desc in case of zero authsize
crypto: caam - fix echainiv(authenc) encrypt shared descriptor
crypto: caam - fix non-hmac hashes
genirq/msi: Make sure PCI MSIs are activated early
genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
um: Don't discard .text.exit section
ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
ACPI: CPPC: Return error if _CPC is invalid on a CPU
mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
PCI: Limit config space size for Netronome NFP4000
PCI: Add Netronome NFP4000 PF device ID
PCI: Limit config space size for Netronome NFP6000 family
PCI: Add Netronome vendor and device IDs
PCI: Support PCIe devices with short cfg_size
NVMe: Don't unmap controller registers on reset
ALSA: hda - Manage power well properly for resume
libnvdimm, nd_blk: mask off reserved status bits
perf intel-pt: Fix occasional decoding errors when tracing system-wide
vfio/pci: Fix NULL pointer oops in error interrupt setup handling
virtio: fix memory leak in virtqueue_add()
parisc: Fix order of EREFUSED define in errno.h
arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
ALSA: usb-audio: Add quirk for ELP HD USB Camera
ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD (VF0610)
powerpc/eeh: eeh_pci_enable(): fix checking of post-request state
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Handle EADDRNOTAVAIL on connection failures
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
x86/mm: Disable preemption during CR3 read+write
hugetlb: fix nr_pmds accounting with shared page tables
mm: SLUB hardened usercopy support
mm: SLAB hardened usercopy support
s390/uaccess: Enable hardened usercopy
sparc/uaccess: Enable hardened usercopy
powerpc/uaccess: Enable hardened usercopy
ia64/uaccess: Enable hardened usercopy
arm64/uaccess: Enable hardened usercopy
ARM: uaccess: Enable hardened usercopy
x86/uaccess: Enable hardened usercopy
x86: remove more uaccess_32.h complexity
x86: remove pointless uaccess_32.h complexity
x86: fix SMAP in 32-bit environments
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
mm: Hardened usercopy
mm: Implement stack frame object validation
mm: Add is_migrate_cma_page
Linux 4.4.19
Documentation/module-signing.txt: Note need for version info if reusing a key
module: Invalidate signatures on force-loaded modules
dm flakey: error READ bios during the down_interval
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()
ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
x86/platform/intel_mid_pci: Rework IRQ0 workaround
PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
MIPS: hpet: Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
MIPS: Don't register r4k sched clock when CPUFREQ enabled
MIPS: mm: Fix definition of R6 cache instruction
SUNRPC: Don't allocate a full sockaddr_storage for tracing
Input: elan_i2c - properly wake up touchpad on ASUS laptops
target: Fix ordered task CHECK_CONDITION early exception handling
target: Fix max_unmap_lba_count calc overflow
target: Fix race between iscsi-target connection shutdown + ABORT_TASK
target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP
target: Fix ordered task target_setup_cmd_from_cdb exception hang
iscsi-target: Fix panic when adding second TCP connection to iSCSI session
ubi: Fix race condition between ubi device creation and udev
ubi: Fix early logging
ubi: Make volume resize power cut aware
of: fix memory leak related to safe_name()
IB/mlx4: Fix memory leak if QP creation failed
IB/mlx4: Fix error flow when sending mads under SRIOV
IB/mlx4: Fix the SQ size of an RC QP
IB/IWPM: Fix a potential skb leak
IB/IPoIB: Don't update neigh validity for unresolved entries
IB/SA: Use correct free function
IB/mlx5: Return PORT_ERR in Active to Initializing tranisition
IB/mlx5: Fix post send fence logic
IB/mlx5: Fix entries check in mlx5_ib_resize_cq
IB/mlx5: Fix returned values of query QP
IB/mlx5: Fix entries checks in mlx5_ib_create_cq
IB/mlx5: Fix MODIFY_QP command input structure
ALSA: hda - Fix headset mic detection problem for two dell machines
ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps
ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO
ALSA: hda: Fix krealloc() with __GFP_ZERO usage
mm/hugetlb: avoid soft lockup in set_max_huge_pages()
mtd: nand: fix bug writing 1 byte less than page size
block: fix bdi vs gendisk lifetime mismatch
block: add missing group association in bio-cloning functions
metag: Fix __cmpxchg_u32 asm constraint for CMP
ftrace/recordmcount: Work around for addition of metag magic but not relocations
balloon: check the number of available pages in leak balloon
drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/edid: Add 6 bpc quirk for display AEO model 0.
drm: Restore double clflush on the last partial cacheline
drm/nouveau/fbcon: fix font width not divisible by 8
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau: check for supported chipset before booting fbdev off the hw
drm/radeon: support backlight control for UNIPHY3
drm/radeon: fix firmware info version checks
drm/radeon: Poll for both connect/disconnect on analog connectors
drm/radeon: add a delay after ATPX dGPU power off
drm/amdgpu/gmc7: add missing mullins case
drm/amdgpu: fix firmware info version checks
drm/amdgpu: Disable RPM helpers while reprobing connectors on resume
drm/amdgpu: support backlight control for UNIPHY3
drm/amdgpu: Poll for both connect/disconnect on analog connectors
drm/amdgpu: add a delay after ATPX dGPU power off
w1:omap_hdq: fix regression
netlabel: add address family checks to netlbl_{sock,req}_delattr()
ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys
audit: fix a double fetch in audit_log_single_execve_arg()
iommu/amd: Update Alias-DTE in update_device_table()
iommu/amd: Init unity mappings only for dma_ops domains
iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back
iommu/vt-d: Return error code in domain_context_mapping_one()
iommu/exynos: Suppress unbinding to prevent system failure
drm/i915: Don't complain about lack of ACPI video bios
nfsd: don't return an unhashed lock stateid after taking mutex
nfsd: Fix race between FREE_STATEID and LOCK
nfs: don't create zero-length requests
MIPS: KVM: Propagate kseg0/mapped tlb fault errors
MIPS: KVM: Fix gfn range check in kseg0 tlb faults
MIPS: KVM: Add missing gfn range check
MIPS: KVM: Fix mapped fault broken commpage handling
random: add interrupt callback to VMBus IRQ handler
random: print a warning for the first ten uninitialized random users
random: initialize the non-blocking pool via add_hwgenerator_randomness()
CIFS: Fix a possible invalid memory access in smb2_query_symlink()
cifs: fix crash due to race in hmac(md5) handling
cifs: Check for existing directory when opening file with O_CREAT
fs/cifs: make share unaccessible at root level mountable
jbd2: make journal y2038 safe
ARC: mm: don't loose PTE_SPECIAL in pte_modify()
remoteproc: Fix potential race condition in rproc_add
ovl: disallow overlayfs as upperdir
HID: uhid: fix timeout when probe races with IO
EDAC: Correct channel count limit
Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU
spi: pxa2xx: Clear all RFT bits in reset_sccr1() on Intel Quark
i2c: efm32: fix a failure path in efm32_i2c_probe()
s5p-mfc: Add release callback for memory region devs
s5p-mfc: Set device name for reserved memory region devs
hp-wmi: Fix wifi cannot be hard-unblocked
dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING
sur40: fix occasional oopses on device close
sur40: lower poll interval to fix occasional FPS drops to ~56 FPS
Fix RC5 decoding with Fintek CIR chipset
vb2: core: Skip planes array verification if pb is NULL
videobuf2-v4l2: Verify planes array in buffer dequeueing
media: dvb_ringbuffer: Add memory barriers
media: usbtv: prevent access to free'd resources
mfd: qcom_rpm: Parametrize also ack selector size
mfd: qcom_rpm: Fix offset error for msm8660
intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
s390/cio: allow to reset channel measurement block
KVM: nVMX: Fix memory corruption when using VMCS shadowing
KVM: VMX: handle PML full VMEXIT that occurs during event delivery
KVM: MTRR: fix kvm_mtrr_check_gfn_range_consistency page fault
KVM: PPC: Book3S HV: Save/restore TM state in H_CEDE
KVM: PPC: Book3S HV: Pull out TM state save/restore into separate procedures
arm64: mm: avoid fdt_check_header() before the FDT is fully mapped
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
pinctrl: cherryview: prevent concurrent access to GPIO controllers
Bluetooth: hci_intel: Fix null gpio desc pointer dereference
gpio: intel-mid: Remove potentially harmful code
gpio: pca953x: Fix NBANK calculation for PCA9536
tty/serial: atmel: fix RS485 half duplex with DMA
serial: samsung: Fix ERR pointer dereference on deferred probe
tty: serial: msm: Don't read off end of tx fifo
arm64: Fix incorrect per-cpu usage for boot CPU
arm64: debug: unmask PSTATE.D earlier
arm64: kernel: Save and restore UAO and addr_limit on exception entry
USB: usbfs: fix potential infoleak in devio
usb: renesas_usbhs: fix NULL pointer dereference in xfer_work()
USB: serial: option: add support for Telit LE910 PID 0x1206
usb: dwc3: fix for the isoc transfer EP_BUSY flag
usb: quirks: Add no-lpm quirk for Elan
usb: renesas_usbhs: protect the CFIFOSEL setting in usbhsg_ep_enable()
usb: f_fs: off by one bug in _ffs_func_bind()
usb: gadget: avoid exposing kernel stack
UPSTREAM: usb: gadget: configfs: add mutex lock before unregister gadget
ANDROID: dm-verity: adopt changes made to dm callbacks
UPSTREAM: ecryptfs: fix handling of directory opening
ANDROID: net: core: fix UID-based routing
ANDROID: net: fib: remove duplicate assignment
FROMLIST: proc: Fix timerslack_ns CAP_SYS_NICE check when adjusting self
ANDROID: dm verity fec: pack the fec_header structure
ANDROID: dm: android-verity: Verify header before fetching table
ANDROID: dm: allow adb disable-verity only in userdebug
ANDROID: dm: mount as linear target if eng build
ANDROID: dm: use default verity public key
ANDROID: dm: fix signature verification flag
ANDROID: dm: use name_to_dev_t
ANDROID: dm: rename dm-linear methods for dm-android-verity
ANDROID: dm: Minor cleanup
ANDROID: dm: Mounting root as linear device when verity disabled
ANDROID: dm-android-verity: Rebase on top of 4.1
ANDROID: dm: Add android verity target
ANDROID: dm: fix dm_substitute_devices()
ANDROID: dm: Rebase on top of 4.1
CHROMIUM: dm: boot time specification of dm=
Implement memory_state_time, used by qcom,cpubw
Revert "panic: Add board ID to panic output"
usb: gadget: f_accessory: remove duplicate endpoint alloc
BACKPORT: brcmfmac: defer DPC processing during probe
FROMLIST: proc: Add LSM hook checks to /proc/<tid>/timerslack_ns
FROMLIST: proc: Relax /proc/<tid>/timerslack_ns capability requirements
UPSTREAM: ppp: defer netns reference release for ppp channel
cpuset: Add allow_attach hook for cpusets on android.
UPSTREAM: KEYS: Fix ASN.1 indefinite length object parsing
ANDROID: sdcardfs: fix itnull.cocci warnings
android-recommended.cfg: enable fstack-protector-strong
Linux 4.4.18
mm: memcontrol: fix memcg id ref counter on swap charge move
mm: memcontrol: fix swap counter leak on swapout from offline cgroup
mm: memcontrol: fix cgroup creation failure after many small jobs
ext4: fix reference counting bug on block allocation error
ext4: short-cut orphan cleanup on error
ext4: validate s_reserved_gdt_blocks on mount
ext4: don't call ext4_should_journal_data() on the journal inode
ext4: fix deadlock during page writeback
ext4: check for extents that wrap around
crypto: scatterwalk - Fix test in scatterwalk_done
crypto: gcm - Filter out async ghash if necessary
fs/dcache.c: avoid soft-lockup in dput()
fuse: fix wrong assignment of ->flags in fuse_send_init()
fuse: fuse_flush must check mapping->flags for errors
fuse: fsync() did not return IO errors
sysv, ipc: fix security-layer leaking
block: fix use-after-free in seq file
x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace
drm/i915: Pretend cursor is always on for ILK-style WM calculations (v2)
x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386
x86/pat: Document the PAT initialization sequence
x86/xen, pat: Remove PAT table init code from Xen
x86/mtrr: Fix PAT init handling when MTRR is disabled
x86/mtrr: Fix Xorg crashes in Qemu sessions
x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
x86/mm/pat: Add pat_disable() interface
x86/mm/pat: Add support of non-default PAT MSR setting
devpts: clean up interface to pty drivers
random: strengthen input validation for RNDADDTOENTCNT
apparmor: fix ref count leak when profile sha1 hash is read
Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"
KEYS: 64-bit MIPS needs to use compat_sys_keyctl for 32-bit userspace
arm: oabi compat: add missing access checks
cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
x86/mm/32: Enable full randomization on i386 and X86_32
HID: sony: do not bail out when the sixaxis refuses the output report
PNP: Add Broadwell to Intel MCH size workaround
PNP: Add Haswell-ULT to Intel MCH size workaround
scsi: ignore errors from scsi_dh_add_device()
ipath: Restrict use of the write() interface
tcp: consider recv buf for the initial window scale
qed: Fix setting/clearing bit in completion bitmap
net/irda: fix NULL pointer dereference on memory allocation failure
net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
bonding: set carrier off for devices created through netlink
ipv4: reject RTNH_F_DEAD and RTNH_F_LINKDOWN from user space
tcp: enable per-socket rate limiting of all 'challenge acks'
tcp: make challenge acks less predictable
arm64: relocatable: suppress R_AARCH64_ABS64 relocations in vmlinux
arm64: vmlinux.lds: make __rela_offset and __dynsym_offset ABSOLUTE
Linux 4.4.17
vfs: fix deadlock in file_remove_privs() on overlayfs
intel_th: Fix a deadlock in modprobing
intel_th: pci: Add Kaby Lake PCH-H support
net: mvneta: set real interrupt per packet for tx_done
libceph: apply new_state before new_up_client on incrementals
libata: LITE-ON CX1-JB256-HP needs lower max_sectors
i2c: mux: reg: wrong condition checked for of_address_to_resource return value
posix_cpu_timer: Exit early when process has been reaped
media: fix airspy usb probe error path
ipr: Clear interrupt on croc/crocodile when running with LSI
SCSI: fix new bug in scsi_dev_info_list string matching
RDS: fix rds_tcp_init() error path
can: fix oops caused by wrong rtnl dellink usage
can: fix handling of unmodifiable configuration options fix
can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone access
can: at91_can: RX queue could get stuck at high bus load
perf/x86: fix PEBS issues on Intel Atom/Core2
ovl: handle ATTR_KILL*
sched/fair: Fix effective_load() to consistently use smoothed load
mmc: block: fix packed command header endianness
block: fix use-after-free in sys_ioprio_get()
qeth: delete napi struct when removing a qeth device
platform/chrome: cros_ec_dev - double fetch bug in ioctl
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
spi: sun4i: fix FIFO limit
spi: sunxi: fix transfer timeout
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
ext4: verify extent header depth
ecryptfs: don't allow mmap when the lower fs doesn't support it
Revert "ecryptfs: forbid opening files without mmap handler"
locks: use file_inode()
power_supply: power_supply_read_temp only if use_cnt > 0
cgroup: set css->id to -1 during init
pinctrl: imx: Do not treat a PIN without MUX register as an error
pinctrl: single: Fix missing flush of posted write for a wakeirq
pvclock: Add CPU barriers to get correct version value
Input: tsc200x - report proper input_dev name
Input: xpad - validate USB endpoint count during probe
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
Input: elantech - add more IC body types to the list
Input: vmmouse - remove port reservation
ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
ALSA: timer: Fix leak in events via snd_timer_user_ccallback
ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS
xenbus: don't bail early from xenbus_dev_request_and_reply()
xenbus: don't BUG() on user mode induced condition
xen/pciback: Fix conf_space read/write overlap check.
ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)
arc: unwind: warn only once if DW2_UNWIND is disabled
kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w
pps: do not crash when failed to register
vmlinux.lds: account for destructor sections
mm, meminit: ensure node is online before checking whether pages are uninitialised
mm, meminit: always return a valid node from early_pfn_to_nid
mm, compaction: prevent VM_BUG_ON when terminating freeing scanner
fs/nilfs2: fix potential underflow in call to crc32_le
mm, compaction: abort free scanner if split fails
mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
dmaengine: at_xdmac: double FIFO flush needed to compute residue
dmaengine: at_xdmac: fix residue corruption
dmaengine: at_xdmac: align descriptors on 64 bits
x86/quirks: Add early quirk to reset Apple AirPort card
x86/quirks: Reintroduce scanning of secondary buses
x86/quirks: Apply nvidia_bugs quirk only on root bus
USB: OHCI: Don't mark EDs as ED_OPER if scheduling fails
Conflicts:
arch/arm/kernel/topology.c
arch/arm64/include/asm/arch_gicv3.h
arch/arm64/kernel/topology.c
block/bio.c
drivers/cpufreq/Kconfig
drivers/md/Makefile
drivers/media/dvb-core/dvb_ringbuffer.c
drivers/media/tuners/tuner-xc2028.c
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/mmc/core/host.c
drivers/scsi/ufs/ufshcd.c
drivers/scsi/ufs/ufshcd.h
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/configfs.c
fs/ecryptfs/file.c
include/linux/mmc/core.h
include/linux/mmc/host.h
include/linux/mmzone.h
include/linux/sched.h
include/linux/sched/sysctl.h
include/trace/events/power.h
include/trace/events/sched.h
init/Kconfig
kernel/cpuset.c
kernel/exit.c
kernel/sched/Makefile
kernel/sched/core.c
kernel/sched/cputime.c
kernel/sched/fair.c
kernel/sched/features.h
kernel/sched/rt.c
kernel/sched/sched.h
kernel/sched/stop_task.c
kernel/sched/tune.c
lib/Kconfig.debug
mm/Makefile
mm/vmstat.c
Change-Id: I243a43231ca56a6362076fa6301827e1b0493be5
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
|
|
We no longer require dm_table_put. Upstream fixed the dm_mounts
driver to remove this symbol.
Change-Id: I4ba1043965d25ec444a833283392ac2394c845f3
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
1. "dm: optimize use SRCU and RCU" removes the use of dm_table_put.
2. "dm: remove request-based logic from make_request_fn wrapper" necessitates
calling dm_setup_md_queue or else the request_queue's make_request_fn
pointer ends being unset.
[ 7.711600] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP
[ 7.717519] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.1.15-02273-gb057d16-dirty #33
[ 7.726559] Hardware name: HiKey Development Board (DT)
[ 7.731779] task: ffffffc005f8acc0 ti: ffffffc005f8c000 task.ti: ffffffc005f8c000
[ 7.739257] PC is at 0x0
[ 7.741787] LR is at generic_make_request+0x8c/0x108
....
[ 9.082931] Call trace:
[ 9.085372] [< (null)>] (null)
[ 9.090074] [<ffffffc0003f4ac0>] submit_bio+0x98/0x1e0
[ 9.095212] [<ffffffc0001e2618>] _submit_bh+0x120/0x1f0
[ 9.096165] cfg80211: Calling CRDA to update world regulatory domain
[ 9.106781] [<ffffffc0001e5450>] __bread_gfp+0x94/0x114
[ 9.112004] [<ffffffc00024a748>] ext4_fill_super+0x18c/0x2d64
[ 9.117750] [<ffffffc0001b275c>] mount_bdev+0x194/0x1c0
[ 9.122973] [<ffffffc0002450dc>] ext4_mount+0x14/0x1c
[ 9.128021] [<ffffffc0001b29a0>] mount_fs+0x3c/0x194
[ 9.132985] [<ffffffc0001d059c>] vfs_kern_mount+0x4c/0x134
[ 9.138467] [<ffffffc0001d2168>] do_mount+0x204/0xbbc
[ 9.143514] [<ffffffc0001d2ec4>] SyS_mount+0x94/0xe8
[ 9.148479] [<ffffffc000c54074>] mount_block_root+0x120/0x24c
[ 9.154222] [<ffffffc000c543e8>] mount_root+0x110/0x12c
[ 9.159443] [<ffffffc000c54574>] prepare_namespace+0x170/0x1b8
[ 9.165273] [<ffffffc000c53d98>] kernel_init_freeable+0x23c/0x260
[ 9.171365] [<ffffffc0009b1748>] kernel_init+0x10/0x118
[ 9.176589] Code: bad PC value
[ 9.179807] ---[ end trace 75e1bc52ba364d13 ]---
Bug: 27175947
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I952d86fd1475f0825f9be1386e3497b36127abd0
Git-commit: 5a77db78398a7247ab6bb6ff9720bae19d1f9ff4
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
This is a wrap-up of three patches pending upstream approval.
I'm bundling them because they are interdependent, and it'll be
easier to drop it on rebase later.
1. dm: allow a dm-fs-style device to be shared via dm-ioctl
Integrates feedback from Alisdair, Mike, and Kiyoshi.
Two main changes occur here:
- One function is added which allows for a programmatically created
mapped device to be inserted into the dm-ioctl hash table. This binds
the device to a name and, optional, uuid which is needed by udev and
allows for userspace management of the mapped device.
- dm_table_complete() was extended to handle all of the final
functional changes required for the table to be operational once
called.
2. init: boot to device-mapper targets without an initr*
Add a dm= kernel parameter modeled after the md= parameter from
do_mounts_md. It allows for device-mapper targets to be configured at
boot time for use early in the boot process (as the root device or
otherwise). It also replaces /dev/XXX calls with major:minor opportunistically.
The format is dm="name uuid ro,table line 1,table line 2,...". The
parser expects the comma to be safe to use as a newline substitute but,
otherwise, uses the normal separator of space. Some attempt has been
made to make it forgiving of additional spaces (using skip_spaces()).
A mapped device created during boot will be assigned a minor of 0 and
may be access via /dev/dm-0.
An example dm-linear root with no uuid may look like:
root=/dev/dm-0 dm="lroot none ro, 0 4096 linear /dev/ubdb 0, 4096 4096 linear /dv/ubdc 0"
Once udev is started, /dev/dm-0 will become /dev/mapper/lroot.
Older upstream threads:
http://marc.info/?l=dm-devel&m=127429492521964&w=2
http://marc.info/?l=dm-devel&m=127429499422096&w=2
http://marc.info/?l=dm-devel&m=127429493922000&w=2
Latest upstream threads:
https://patchwork.kernel.org/patch/104859/
https://patchwork.kernel.org/patch/104860/
https://patchwork.kernel.org/patch/104861/
Bug: 27175947
Signed-off-by: Will Drewry <wad@chromium.org>
Review URL: http://codereview.chromium.org/2020011
Change-Id: I92bd53432a11241228d2e5ac89a3b20d19b05a31
Git-commit: 96b0434c25be8c73822a679be35b29ca5263baea
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
To temporarily allow compilation of an upcoming dm change,
add a dummy dm_table_put definition.
Change-Id: Iceca2eb6daa55f0acb936eafe1d59f65f7cfcd55
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
|
|
To support task performance boosting, the usage of a single knob has the
advantage to be a simple solution, both from the implementation and the
usability standpoint. However, on a real system it can be difficult to
identify a single value for the knob which fits the needs of multiple
different tasks. For example, some kernel threads and/or user-space
background services should be better managed the "standard" way while we
still want to be able to boost the performance of specific workloads.
In order to improve the flexibility of the task boosting mechanism this
patch is the first of a small series which extends the previous
implementation to introduce a "per task group" support.
This first patch introduces just the basic CGroups support, a new
"schedtune" CGroups controller is added which allows to configure
different boost value for different groups of tasks.
To keep the implementation simple but still effective for a boosting
strategy, the new controller:
1. allows only a two layer hierarchy
2. supports only a limited number of boost groups
A two layer hierarchy allows to place each task either:
a) in the root control group
thus being subject to a system-wide boosting value
b) in a child of the root group
thus being subject to the specific boost value defined by that
"boost group"
The limited number of "boost groups" supported is mainly motivated by
the observation that in a real system it could be useful to have only
few classes of tasks which deserve different treatment.
For example, background vs foreground or interactive vs low-priority.
As an additional benefit, a limited number of boost groups allows also
to have a simpler implementation especially for the code required to
compute the boost value for CPUs which have runnable tasks belonging to
different boost groups.
Change-Id: I1304e33a8440bfdad9c8bcf8129ff390216f2e32
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Git-commit: 13001f47c9a610705219700af4636386b647e231
Git-repo: https://android.googlesource.com/kernel/common
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
Stack canary initialization involves getting a random number.
Getting this random number may involve accessing caches or other
architectural specific features which are not available until
after the architecture is setup. Move the stack canary initialization
later to accommodate this.
Change-Id: I00b564a2c3172229a44339c061fa380c17fe7d8e
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
[ohaugan@codeaurora.org: Fix trivial merge conflict]
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
|
|
The current (CFS) scheduler implementation does not allow "to boost"
tasks performance by running them at a higher OPP compared to the
minimum required to meet their workload demands.
To support tasks performance boosting the scheduler should provide a
"knob" which allows to tune how much the system is going to be optimised
for energy efficiency vs performance.
This patch is the first of a series which provides a simple interface to
define a tuning knob. One system-wide "boost" tunable is exposed via:
/proc/sys/kernel/sched_cfs_boost
which can be configured in the range [0..100], to define a percentage
where:
- 0% boost requires to operate in "standard" mode by scheduling
tasks at the minimum capacities required by the workload demand
- 100% boost requires to push at maximum the task performances,
"regardless" of the incurred energy consumption
A boost value in between these two boundaries is used to bias the
power/performance trade-off, the higher the boost value the more the
scheduler is biased toward performance boosting instead of energy
efficiency.
Change-Id: I59a41725e2d8f9238a61dfb0c909071b53560fc0
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Git-commit: 63c8fad2b06805ef88f1220551289f0a3c3529f1
Git-repo: https://source.codeaurora.org/quic/la/kernel/msm-4.4
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
|
|
Move core control from out-of-tree module into the kernel proper.
Core control monitors load on CPUs and controls how many CPUs are
available for the system to use at any point in time. This can help save
power. Core control can be configured through sysfs interface.
Change-Id: Ia78e701468ea3828195c2a15c9cf9fafd099804a
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
|
|
use a window based view of time in order to track task
demand and CPU utilization in the scheduler.
Window Assisted Load Tracking (WALT) implementation credits:
Srivatsa Vaddagiri, Steve Muckle, Syed Rameez Mustafa, Joonwoo Park,
Pavan Kumar Kondeti, Olav Haugan
2016-03-06: Integration with EAS/refactoring by Vikram Mulukutla
and Todd Kjos
Change-Id: I21408236836625d4e7d7de1843d20ed5ff36c708
Includes fixes for issues:
eas/walt: Use walt_ktime_clock() instead of ktime_get_ns() to avoid a
race resulting in watchdog resets
BUG: 29353986
Change-Id: Ic1820e22a136f7c7ebd6f42e15f14d470f6bbbdb
Handle walt accounting anomoly during resume
During resume, there is a corner case where on wakeup, a task's
prev_runnable_sum can go negative. This is a workaround that
fixes the condition and warns (instead of crashing).
BUG: 29464099
Change-Id: I173e7874324b31a3584435530281708145773508
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Currently the build for a single-core (e.g. user-mode) Linux is broken
and this configuration is required (at least) to run some network tests.
The main issues for the current code support on single-core systems are:
1. {se,rq}::sched_avg is not available nor maintained for !SMP systems
This means that load and utilisation signals are NOT available in single
core systems. All the EAS code depends on these signals.
2. sched_group_energy is also SMP dependant. Again this means that all the
EAS setup and preparation code (energyn model initialization) has to be
properly guarded/disabled for !SMP systems.
3. SchedFreq depends on utilization signal, which is not available on
!SMP systems.
4. SchedTune is useless on unicore systems if SchedFreq is not available.
5. WALT machinery is not required on single-core systems.
This patch addresses all these issues by enforcing some constraints for
single-core systems:
a) WALT, SchedTune and SchedTune are now dependant on SMP
b) The default governor for !SMP systems is INTERACTIVE
c) The energy model initialisation/build functions are
d) Other minor code re-arrangements and CONFIG_SMP guarding to enable
single core builds.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
To support task performance boosting, the usage of a single knob has the
advantage to be a simple solution, both from the implementation and the
usability standpoint. However, on a real system it can be difficult to
identify a single value for the knob which fits the needs of multiple
different tasks. For example, some kernel threads and/or user-space
background services should be better managed the "standard" way while we
still want to be able to boost the performance of specific workloads.
In order to improve the flexibility of the task boosting mechanism this
patch is the first of a small series which extends the previous
implementation to introduce a "per task group" support.
This first patch introduces just the basic CGroups support, a new
"schedtune" CGroups controller is added which allows to configure
different boost value for different groups of tasks.
To keep the implementation simple but still effective for a boosting
strategy, the new controller:
1. allows only a two layer hierarchy
2. supports only a limited number of boost groups
A two layer hierarchy allows to place each task either:
a) in the root control group
thus being subject to a system-wide boosting value
b) in a child of the root group
thus being subject to the specific boost value defined by that
"boost group"
The limited number of "boost groups" supported is mainly motivated by
the observation that in a real system it could be useful to have only
few classes of tasks which deserve different treatment.
For example, background vs foreground or interactive vs low-priority.
As an additional benefit, a limited number of boost groups allows also
to have a simpler implementation especially for the code required to
compute the boost value for CPUs which have runnable tasks belonging to
different boost groups.
cc: Tejun Heo <tj@kernel.org>
cc: Li Zefan <lizefan@huawei.com>
cc: Johannes Weiner <hannes@cmpxchg.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
The current (CFS) scheduler implementation does not allow "to boost"
tasks performance by running them at a higher OPP compared to the
minimum required to meet their workload demands.
To support tasks performance boosting the scheduler should provide a
"knob" which allows to tune how much the system is going to be optimised
for energy efficiency vs performance.
This patch is the first of a series which provides a simple interface to
define a tuning knob. One system-wide "boost" tunable is exposed via:
/proc/sys/kernel/sched_cfs_boost
which can be configured in the range [0..100], to define a percentage
where:
- 0% boost requires to operate in "standard" mode by scheduling
tasks at the minimum capacities required by the workload demand
- 100% boost requires to push at maximum the task performances,
"regardless" of the incurred energy consumption
A boost value in between these two boundaries is used to bias the
power/performance trade-off, the higher the boost value the more the
scheduler is biased toward performance boosting instead of energy
efficiency.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
Conflicts:
arch/arm/Kconfig
|
|
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLUB allocator to catch any copies that may span objects. Includes a
redzone handling fix discovered by Michael Ellerman.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviwed-by: Laura Abbott <labbott@redhat.com>
(cherry picked from commit ed18adc1cdd00a5c55a20fbdaed4804660772281)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
|
|
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLAB allocator to catch any copies that may span objects.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
(cherry picked from commit 04385fc5e8fffed84425d909a783c0f0c587d847)
Signed-off-by: Alex Shi <alex.shi@linaro.org>
|
|
When candidate is the last parameter, candidate_end points to the '\0'
character and not the DM_FIELD_SEP character. In such a situation, we
should not move the candidate_end pointer one character backward.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
|
|
1. "dm: optimize use SRCU and RCU" removes the use of dm_table_put.
2. "dm: remove request-based logic from make_request_fn wrapper" necessitates
calling dm_setup_md_queue or else the request_queue's make_request_fn
pointer ends being unset.
[ 7.711600] Internal error: Oops - bad mode: 0 [#1] PREEMPT SMP
[ 7.717519] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.1.15-02273-gb057d16-dirty #33
[ 7.726559] Hardware name: HiKey Development Board (DT)
[ 7.731779] task: ffffffc005f8acc0 ti: ffffffc005f8c000 task.ti: ffffffc005f8c000
[ 7.739257] PC is at 0x0
[ 7.741787] LR is at generic_make_request+0x8c/0x108
....
[ 9.082931] Call trace:
[ 9.085372] [< (null)>] (null)
[ 9.090074] [<ffffffc0003f4ac0>] submit_bio+0x98/0x1e0
[ 9.095212] [<ffffffc0001e2618>] _submit_bh+0x120/0x1f0
[ 9.096165] cfg80211: Calling CRDA to update world regulatory domain
[ 9.106781] [<ffffffc0001e5450>] __bread_gfp+0x94/0x114
[ 9.112004] [<ffffffc00024a748>] ext4_fill_super+0x18c/0x2d64
[ 9.117750] [<ffffffc0001b275c>] mount_bdev+0x194/0x1c0
[ 9.122973] [<ffffffc0002450dc>] ext4_mount+0x14/0x1c
[ 9.128021] [<ffffffc0001b29a0>] mount_fs+0x3c/0x194
[ 9.132985] [<ffffffc0001d059c>] vfs_kern_mount+0x4c/0x134
[ 9.138467] [<ffffffc0001d2168>] do_mount+0x204/0xbbc
[ 9.143514] [<ffffffc0001d2ec4>] SyS_mount+0x94/0xe8
[ 9.148479] [<ffffffc000c54074>] mount_block_root+0x120/0x24c
[ 9.154222] [<ffffffc000c543e8>] mount_root+0x110/0x12c
[ 9.159443] [<ffffffc000c54574>] prepare_namespace+0x170/0x1b8
[ 9.165273] [<ffffffc000c53d98>] kernel_init_freeable+0x23c/0x260
[ 9.171365] [<ffffffc0009b1748>] kernel_init+0x10/0x118
[ 9.176589] Code: bad PC value
[ 9.179807] ---[ end trace 75e1bc52ba364d13 ]---
Bug: 27175947
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I952d86fd1475f0825f9be1386e3497b36127abd0
|
|
This is a wrap-up of three patches pending upstream approval.
I'm bundling them because they are interdependent, and it'll be
easier to drop it on rebase later.
1. dm: allow a dm-fs-style device to be shared via dm-ioctl
Integrates feedback from Alisdair, Mike, and Kiyoshi.
Two main changes occur here:
- One function is added which allows for a programmatically created
mapped device to be inserted into the dm-ioctl hash table. This binds
the device to a name and, optional, uuid which is needed by udev and
allows for userspace management of the mapped device.
- dm_table_complete() was extended to handle all of the final
functional changes required for the table to be operational once
called.
2. init: boot to device-mapper targets without an initr*
Add a dm= kernel parameter modeled after the md= parameter from
do_mounts_md. It allows for device-mapper targets to be configured at
boot time for use early in the boot process (as the root device or
otherwise). It also replaces /dev/XXX calls with major:minor opportunistically.
The format is dm="name uuid ro,table line 1,table line 2,...". The
parser expects the comma to be safe to use as a newline substitute but,
otherwise, uses the normal separator of space. Some attempt has been
made to make it forgiving of additional spaces (using skip_spaces()).
A mapped device created during boot will be assigned a minor of 0 and
may be access via /dev/dm-0.
An example dm-linear root with no uuid may look like:
root=/dev/dm-0 dm="lroot none ro, 0 4096 linear /dev/ubdb 0, 4096 4096 linear /dv/ubdc 0"
Once udev is started, /dev/dm-0 will become /dev/mapper/lroot.
Older upstream threads:
http://marc.info/?l=dm-devel&m=127429492521964&w=2
http://marc.info/?l=dm-devel&m=127429499422096&w=2
http://marc.info/?l=dm-devel&m=127429493922000&w=2
Latest upstream threads:
https://patchwork.kernel.org/patch/104859/
https://patchwork.kernel.org/patch/104860/
https://patchwork.kernel.org/patch/104861/
Bug: 27175947
Signed-off-by: Will Drewry <wad@chromium.org>
Review URL: http://codereview.chromium.org/2020011
Change-Id: I92bd53432a11241228d2e5ac89a3b20d19b05a31
|
|
* tmp-917a9:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linux 4.4.6
ld-version: Fix awk regex compile failure
target: Drop incorrect ABORT_TASK put for completed commands
block: don't optimize for non-cloned bio in bio_get_last_bvec()
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: copy new uid/gid into overlayfs runtime inode
userfaultfd: don't block on the last VM updates at exit time
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic
powerpc: Fix dedotify for binutils >= 2.26
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Revert "drm/radeon: call hpd_irq_event on resume"
x86/mm: Fix slow_virt_to_phys() for X86_PAE again
gpu: ipu-v3: Do not bail out on missing optional port nodes
mac80211: Fix Public Action frame RX in AP mode
mac80211: check PN correctly for GCMP-encrypted fragmented MPDUs
mac80211: minstrel_ht: fix a logic error in RTS/CTS handling
mac80211: minstrel_ht: set default tx aggregation timeout to 0
mac80211: fix use of uninitialised values in RX aggregation
mac80211: minstrel: Change expected throughput unit back to Kbps
iwlwifi: mvm: inc pending frames counter also when txing non-sta
can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()
cfg80211/wext: fix message ordering
wext: fix message delay/ordering
ovl: fix working on distributed fs as lower layer
ovl: ignore lower entries when checking purity of non-directory entries
ASoC: wm8958: Fix enum ctl accesses in a wrong type
ASoC: wm8994: Fix enum ctl accesses in a wrong type
ASoC: samsung: Use IRQ safe spin lock calls
ASoC: dapm: Fix ctl value accesses in a wrong type
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
jffs2: reduce the breakage on recovery from halfway failed rename()
dmaengine: at_xdmac: fix residue computation
tracing: Fix check for cpu online when event is disabled
s390/dasd: fix diag 0x250 inline assembly
s390/mm: four page table levels vs. fork
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
KVM: VMX: disable PEBS before a guest entry
kvm: cap halt polling at exactly halt_poll_ns
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
arm64: account for sparsemem section alignment when choosing vmemmap offset
Linux 4.4.5
drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable
modules: fix longstanding /proc/kallsyms vs module insertion race.
drm/i915: refine qemu south bridge detection
drm/i915: more virtual south bridge detection
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
drm/amdgpu: Use drm_calloc_large for VM page_tables array
thermal: cpu_cooling: fix out of bounds access in time_in_idle
i2c: brcmstb: allocate correct amount of memory for regmap
ubi: Fix out of bounds write in volume update code
cxl: Fix PSL timebase synchronization detection
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
MIPS: scache: Fix scache init with invalid line size.
USB: serial: option: add support for Quectel UC20
USB: serial: option: add support for Telit LE922 PID 0x1045
USB: qcserial: add Sierra Wireless EM74xx device ID
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
usb: chipidea: otg: change workqueue ci_otg as freezable
ALSA: timer: Fix broken compat timer user status ioctl
ALSA: hdspm: Fix zero-division
ALSA: hdsp: Fix wrong boolean ctl value accesses
ALSA: hdspm: Fix wrong boolean ctl value accesses
ALSA: seq: oss: Don't drain at closing a client
ALSA: pcm: Fix ioctls for X32 ABI
ALSA: timer: Fix ioctls for X32 ABI
ALSA: rawmidi: Fix ioctls X32 ABI
ALSA: hda - Fix mic issues on Acer Aspire E1-472
ALSA: ctl: Fix ioctls for X32 ABI
ALSA: usb-audio: Add a quirk for Plantronics DA45
adv7604: fix tx 5v detect regression
dmaengine: pxa_dma: fix cyclic transfers
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
Btrfs: fix loading of orphan roots leading to BUG_ON
pata-rb532-cf: get rid of the irq_to_gpio() call
tracing: Do not have 'comm' filter override event 'comm' field
ata: ahci: don't mark HotPlugCapable Ports as external/removable
PM / sleep / x86: Fix crash on graph trace through x86 suspend
arm64: vmemmap: use virtual projection of linear region
Adding Intel Lewisburg device IDs for SATA
writeback: flush inode cgroup wb switches instead of pinning super_block
block: bio: introduce helpers to get the 1st and last bvec
libata: Align ata_device's id on a cacheline
libata: fix HDIO_GET_32BIT ioctl
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amdgpu/pm: update current crtc info after setting the powerstate
drm/radeon/pm: update current crtc info after setting the powerstate
drm/ast: Fix incorrect register check for DRAM width
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
iommu/amd: Apply workaround for ATS write permission check
arm/arm64: KVM: Fix ioctl error handling
KVM: x86: fix root cause for missed hardware breakpoints
vfio: fix ioctl error handling
Fix cifs_uniqueid_to_ino_t() function for s390x
CIFS: Fix SMB2+ interim response processing for read requests
cifs: fix out-of-bounds access in lease parsing
fbcon: set a default value to blink interval
kvm: x86: Update tsc multiplier on change.
mips/kvm: fix ioctl error handling
parisc: Fix ptrace syscall number and return value modification
PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer
block: Initialize max_dev_sectors to 0
drm/amdgpu: mask out WC from BO on unsupported arches
btrfs: async-thread: Fix a use-after-free error for trace
btrfs: Fix no_space in write and rm loop
Btrfs: fix deadlock running delayed iputs at transaction commit time
drivers: sh: Restore legacy clock domain on SuperH platforms
use ->d_seq to get coherency between ->d_inode and ->d_flags
Linux 4.4.4
iwlwifi: mvm: don't allow sched scans without matches to be started
iwlwifi: update and fix 7265 series PCI IDs
iwlwifi: pcie: properly configure the debug buffer size for 8000
iwlwifi: dvm: fix WoWLAN
security: let security modules use PTRACE_MODE_* with bitmasks
IB/cma: Fix RDMA port validation for iWarp
x86/irq: Plug vector cleanup race
x86/irq: Call irq_force_move_complete with irq descriptor
x86/irq: Remove outgoing CPU from vector cleanup mask
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
x86/irq: Clear move_in_progress before sending cleanup IPI
x86/irq: Remove offline cpus from vector cleanup
x86/irq: Get rid of code duplication
x86/irq: Copy vectormask instead of an AND operation
x86/irq: Check vector allocation early
x86/irq: Reorganize the search in assign_irq_vector
x86/irq: Reorganize the return path in assign_irq_vector
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
x86/irq: Validate that irq descriptor is still active
x86/irq: Fix a race in x86_vector_free_irqs()
x86/irq: Call chip->irq_set_affinity in proper context
x86/entry/compat: Add missing CLAC to entry_INT80_32
x86/mpx: Fix off-by-one comparison with nr_registers
hpfs: don't truncate the file when delete fails
do_last(): ELOOP failure exit should be done after leaving RCU mode
should_follow_link(): validate ->d_seq after having decided to follow
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
xen/scsiback: correct frontend counting
xen/arm: correctly handle DMA mapping of compound pages
ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
do_last(): don't let a bogus return value from ->open() et.al. to confuse us
kernel/resource.c: fix muxed resource handling in __request_region()
sunrpc/cache: fix off-by-one in qword_get()
tracing: Fix showing function event in available_events
powerpc/eeh: Fix partial hotplug criterion
KVM: x86: MMU: fix ubsan index-out-of-range warning
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
KVM: async_pf: do not warn on page allocation failures
of/irq: Fix msi-map calculation for nonzero rid-base
NFSv4: Fix a dentry leak on alias use
nfs: fix nfs_size_to_loff_t
block: fix use-after-free in dio_bio_complete
bio: return EINTR if copying to user space got interrupted
i2c: i801: Adding Intel Lewisburg support for iTCO
phy: core: fix wrong err handle for phy_power_on
writeback: keep superblock pinned during cgroup writeback association switches
cgroup: make sure a parent css isn't offlined before its children
cpuset: make mm migration asynchronous
PCI/AER: Flush workqueue on device remove to avoid use-after-free
ARCv2: SMP: Emulate IPI to self using software triggered interrupt
ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
libata: fix sff host state machine locking while polling
qla2xxx: Fix stale pointer access.
spi: atmel: fix gpio chip-select in case of non-DT platform
target: Fix race with SCF_SEND_DELAYED_TAS handling
target: Fix remote-port TMR ABORT + se_cmd fabric stop
target: Fix TAS handling for multi-session se_node_acls
target: Fix LUN_RESET active TMR descriptor handling
target: Fix LUN_RESET active I/O handling for ACK_KREF
ALSA: hda - Fixing background noise on Dell Inspiron 3162
ALSA: hda - Apply clock gate workaround to Skylake, too
Revert "workqueue: make sure delayed work run in local cpu"
workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
mac80211: Requeue work after scan complete for all VIF types.
rfkill: fix rfkill_fop_read wait_event usage
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
perf stat: Do not clean event's private stats
cdc-acm:exclude Samsung phone 04e8:685d
Revert "Staging: panel: usleep_range is preferred over udelay"
Staging: speakup: Fix getting port information
sd: Optimal I/O size is in bytes, not sectors
libceph: don't spam dmesg with stray reply warnings
libceph: use the right footer size when skipping a message
libceph: don't bail early from try_read() when skipping a message
libceph: fix ceph_msg_revoke()
seccomp: always propagate NO_NEW_PRIVS on tsync
cpufreq: Fix NULL reference crash while accessing policy->governor_data
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
hwmon: (ads1015) Handle negative conversion values correctly
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
Thermal: do thermal zone update after a cooling device registered
Thermal: handle thermal zone device properly during system sleep
Thermal: initialize thermal zone device correctly
IB/mlx5: Expose correct maximum number of CQE capacity
IB/qib: Support creating qps with GFP_NOIO flag
IB/qib: fix mcast detach when qp not attached
IB/cm: Fix a recently introduced deadlock
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: at_xdmac: fix resume for cyclic transfers
dmaengine: dw: fix cyclic transfer callbacks
dmaengine: dw: fix cyclic transfer setup
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
lib: sw842: select crc32
uapi: update install list after nvme.h rename
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
toshiba_acpi: Fix blank screen at boot if transflective backlight is supported
make sure that freeing shmem fast symlinks is RCU-delayed
drm/radeon/pm: adjust display configuration after powerstate
drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4
drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2)
drm: No-Op redundant calls to drm_vblank_off() (v2)
drm/radeon: use post-decrement in error handling
drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command
drm/i915: fix error path in intel_setup_gmbus()
drm/i915/dsi: don't pass arbitrary data to sideband
drm/i915/dsi: defend gpio table against out of bounds access
drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
drm/i915: Make sure DC writes are coherent on flush.
drm/i915: Init power domains early in driver load
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
drm/i915: Restore inhibiting the load of the default context
drm: fix missing reference counting decrease
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/radeon: mask out WC from BO on unsupported arches
drm: add helper to check for wc memory support
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
drm/radeon: Add a common function for DFS handling
drm/radeon: cleaned up VCO output settings for DP audio
drm/radeon: properly byte swap vce firmware setup
drm/radeon: clean up fujitsu quirks
drm/radeon: Fix "slow" audio over DP on DCE8+
drm/radeon: call hpd_irq_event on resume
drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/dp/mst: fix in RAD element access
drm/dp/mst: fix in MSTB RAD initialization
drm/dp/mst: always send reply for UP request
drm/dp/mst: process broadcast messages correctly
drm/nouveau: platform: Fix deferred probe
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
drm/nouveau/display: Enable vblank irqs after display engine is on again.
drm/nouveau/kms: take mode_config mutex in connector hotplug path
drm/amdgpu/pm: adjust display configuration after powerstate
drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
drm/amdgpu: use post-decrement in error handling
drm/amdgpu: fix issue with overlapping userptrs
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: fix s4 resume
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu: no need to load MC firmware on fiji
drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
drm/amdgpu: fix tonga smu resume
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amdgpu: call hpd_irq_event on resume
drm/amdgpu: Fix off-by-one errors in amdgpu_vm_bo_map
drm/vmwgfx: respect 'nomodeset'
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
virtio_pci: fix use after free on release
virtio_balloon: fix race between migration and ballooning
virtio_balloon: fix race by fill and leak
regulator: mt6311: MT6311_REGULATOR needs to select REGMAP_I2C
regulator: axp20x: Fix GPIO LDO enable value for AXP22x
clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqs
cxl: use correct operator when writing pcie config space values
sparc64: fix incorrect sign extension in sys_sparc64_personality
EDAC, mc_sysfs: Fix freeing bus' name
EDAC: Robustify workqueues destruction
MIPS: Fix buffer overflow in syscall_get_arguments()
MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefs
MIPS: hpet: Choose a safe value for the ETIME check
MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler
Revert "MIPS: Fix PAGE_MASK definition"
cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()
time: Avoid signed overflow in timekeeping_get_ns()
Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets
Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences
Bluetooth: Fix incorrect removing of IRKs
Bluetooth: Add support of Toshiba Broadcom based devices
Bluetooth: Use continuous scanning when creating LE connections
Drivers: hv: vmbus: Fix a Host signaling bug
tools: hv: vss: fix the write()'s argument: error -> vss_msg
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
mmc: sdhci: Allow override of mmc host operations
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
mmc: pxamci: fix again read-only gpio detection polarity
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
mmc: mmci: fix an ages old detection error
mmc: core: Enable tuning according to the actual timing
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
mmc: sdio: Fix invalid vdd in voltage switch power cycle
mmc: sdhci: Fix DMA descriptor with zero data length
mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT
mmc: usdhi6rol0: handle NULL data in timeout
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
posix-clock: Fix return code on the poll method's error path
irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/mxs: Add missing set_handle_irq()
irqchip/omap-intc: Add support for spurious irq handling
coresight: checking for NULL string in coresight_name_match()
dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
dm snapshot: fix hung bios when copy error occurs
dm space map metadata: remove unused variable in brb_pop()
tda1004x: only update the frontend properties if locked
vb2: fix a regression in poll() behavior for output,streams
gspca: ov534/topro: prevent a division by 0
si2157: return -EINVAL if firmware blob is too big
media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode
rc: sunxi-cir: Initialize the spinlock properly
namei: ->d_inode of a pinned dentry is stable only for positives
mei: validate request value in client notify request ioctl
mei: fix fasync return value on error
rtlwifi: rtl8723be: Fix module parameter initialization
rtlwifi: rtl8188ee: Fix module parameter initialization
rtlwifi: rtl8192se: Fix module parameter initialization
rtlwifi: rtl8723ae: Fix initialization of module parameters
rtlwifi: rtl8192de: Fix incorrect module parameter descriptions
rtlwifi: rtl8192ce: Fix handling of module parameters
rtlwifi: rtl8192cu: Add missing parameter setup
rtlwifi: rtl_pci: Fix kernel panic
locks: fix unlock when fcntl_setlk races with a close
um: link with -lpthread
uml: fix hostfs mknod()
uml: flush stdout before forking
s390/fpu: signals vs. floating point control register
s390/compat: correct restore of high gprs on signal return
s390/dasd: fix performance drop
s390/dasd: fix refcount for PAV reassignment
s390/dasd: prevent incorrect length error under z/VM after PAV changes
s390: fix normalization bug in exception table sorting
btrfs: initialize the seq counter in struct btrfs_device
Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
Btrfs: fix transaction handle leak on failure to create hard link
Btrfs: fix number of transaction units required to create symlink
Btrfs: send, don't BUG_ON() when an empty symlink is found
btrfs: statfs: report zero available if metadata are exhausted
Btrfs: igrab inode in writepage
Btrfs: add missing brelse when superblock checksum fails
KVM: s390: fix memory overwrites when vx is disabled
s390/kvm: remove dependency on struct save_area definition
clocksource/drivers/vt8500: Increase the minimum delta
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
mm: numa: quickly fail allocations for NUMA balancing on full nodes
mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
ocfs2: unlock inode if deleting inode from orphan fails
drm/i915: shut up gen8+ SDE irq dmesg noise
iw_cxgb3: Fix incorrectly returning error on success
spi: omap2-mcspi: Prevent duplicate gpio_request
drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
USB: option: add "4G LTE usb-modem U901"
USB: option: add support for SIM7100E
USB: cp210x: add IDs for GE B650V3 and B850V3 boards
usb: dwc3: Fix assignment of EP transfer resources
can: ems_usb: Fix possible tx overflow
dm thin: fix race condition when destroying thin pool workqueue
bcache: Change refill_dirty() to always scan entire disk if necessary
bcache: prevent crash on changing writeback_running
bcache: allows use of register in udev to avoid "device_busy" error.
bcache: unregister reboot notifier if bcache fails to unregister device
bcache: fix a leak in bch_cached_dev_run()
bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device
bcache: Add a cond_resched() call to gc
bcache: fix a livelock when we cause a huge number of cache misses
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
ARM: 8457/1: psci-smp is built only for SMP
drm/gma500: Use correct unref in the gem bo create function
devm_memremap: Fix error value when memremap failed
KVM: s390: fix guest fprs memory leak
arm64: errata: Add -mpc-relative-literal-loads to build flags
ARM: debug-ll: fix BCM63xx entry for multiplatform
ext4: fix bh->b_state corruption
sctp: Fix port hash table size computation
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
tipc: unlock in error path
rtnl: RTM_GETNETCONF: fix wrong return value
IFF_NO_QUEUE: Fix for drivers not calling ether_setup()
tcp/dccp: fix another race at listener dismantle
route: check and remove route cache when we get route
net_sched fix: reclassification needs to consider ether protocol changes
pppoe: fix reference counting in PPPoE proxy
l2tp: Fix error creating L2TP tunnels
net/mlx4_en: Avoid changing dev->features directly in run-time
net/mlx4_en: Choose time-stamping shift value according to HW frequency
net/mlx4_en: Count HW buffer overrun only once
qmi_wwan: add "4G LTE usb-modem U901"
tcp: md5: release request socket instead of listener
tipc: fix premature addition of node to lookup table
af_unix: Guard against other == sk in unix_dgram_sendmsg
af_unix: Don't set err in unix_stream_read_generic unless there was an error
ipv4: fix memory leaks in ip_cmsg_send() callers
bonding: Fix ARP monitor validation
bpf: fix branch offset adjustment on backjumps after patching ctx expansion
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
net: Copy inner L3 and L4 headers as unaligned on GRE TEB
sctp: translate network order to host order when users get a hmacid
enic: increment devcmd2 result ring in case of timeout
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
net:Add sysctl_max_skb_frags
tcp: do not drop syn_recv on all icmp reports
unix: correctly track in-flight fds in sending process user_struct
ipv6: fix a lockdep splat
ipv6: addrconf: Fix recursive spin lock call
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
tcp: beware of alignments in tcp_get_info()
switchdev: Require RTNL mutex to be held when sending FDB notifications
inet: frag: Always orphan skbs inside ip_defrag()
tipc: fix connection abort during subscription cancel
net: dsa: fix mv88e6xxx switches
sctp: allow setting SCTP_SACK_IMMEDIATELY by the application
pptp: fix illegal memory access caused by multiple bind()s
af_unix: fix struct pid memory leak
tcp: fix NULL deref in tcp_v4_send_ack()
lwt: fix rx checksum setting for lwt devices tunneling over ipv6
tunnels: Allow IPv6 UDP checksums to be correctly controlled.
net: dp83640: Fix tx timestamp overflow handling.
gro: Make GRO aware of lightweight tunnels.
af_iucv: Validate socket address length in iucv_sock_bind()
Conflicts:
arch/arm64/Makefile
arch/arm64/include/asm/cacheflush.h
drivers/mmc/host/sdhci.c
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c
kernel/module.c
sound/core/pcm_compat.c
CRs-Fixed: 1010239
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Change-Id: I41a28636fc9ad91f9d979b191784609476294cdf
|
|
There are CPUs that don't have an obvious low power mode exit latency
penalty. Add a new Kconfig CONFIG_SCHED_HMP_CSTATE_AWARE which controls
whether CPU C-state is used to guide task placement.
CRs-fixed: 1006303
Change-Id: Ie8dbab8e173c3a1842d922f4d1fbd8cc4221789c
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
|
|
Add a compile-time flag to enable or disable scheduler features for
HMP (heterogenous multi-processor) systems. Main feature deals with
optimizing task placement for best power/performance tradeoff.
Also extend features currently dependent on CONFIG_SCHED_FREQ_INPUT to
be enabled for CONFIG_HMP as well.
Change-Id: I03b3942709a80cc19f7b934a8089e1d84c14d72d
Signed-off-by: Srivatsa Vaddagiri <vatsa@codeaurora.org>
[rameezmustafa@codeaurora.org]: Port to msm-3.18]
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
[joonwoop@codeaurora.org: fixed minor ifdefry conflict.]
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
|
|
linux-linaro-lsk-v4.4-android
|
|
mappings
commit d2aa1acad22f1bdd0cfa67b3861800e392254454 upstream.
It may be useful to debug writes to the readonly sections of memory,
so provide a cmdline "rodata=off" to allow for this. This can be
expanded in the future to support "log" and "write" modes, but that
will need to be architecture-specific.
This also makes KDB software breakpoints more usable, as read-only
mappings can now be disabled on any kernel.
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Brown <david.brown@linaro.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: linux-arch <linux-arch@vger.kernel.org>
Link: http://lkml.kernel.org/r/1455748879-21872-3-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a skip_initramfs option to allow choosing whether to boot using
the initramfs or not at runtime.
Change-Id: If30428fa748c1d4d3d7b9d97c1f781de5e4558c3
Signed-off-by: Rom Lemarchand <romlem@google.com>
|
|
Currently the full stop_machine() routine is only enabled on SMP if
module unloading is enabled, or if the CPUs are hotpluggable. This
leads to configurations where stop_machine() is broken as it will then
only run the callback on the local CPU with irqs disabled, and not stop
the other CPUs or run the callback on them.
For example, this breaks MTRR setup on x86 in certain configs since
ea8596bb2d8d379 ("kprobes/x86: Remove unused text_poke_smp() and
text_poke_smp_batch() functions") as the MTRR is only established on the
boot CPU.
This patch removes the Kconfig option for STOP_MACHINE and uses the SMP
and HOTPLUG_CPU config options to compile the correct stop_machine() for
the architecture, removing the false dependency on MODULE_UNLOAD in the
process.
Link: https://lkml.org/lkml/2014/10/8/124
References: https://bugs.freedesktop.org/show_bug.cgi?id=84794
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Iulia Manda <iulia.manda21@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Here is an implementation of a new system call, sys_membarrier(), which
executes a memory barrier on all threads running on the system. It is
implemented by calling synchronize_sched(). It can be used to
distribute the cost of user-space memory barriers asymmetrically by
transforming pairs of memory barriers into pairs consisting of
sys_membarrier() and a compiler barrier. For synchronization primitives
that distinguish between read-side and write-side (e.g. userspace RCU
[1], rwlocks), the read-side can be accelerated significantly by moving
the bulk of the memory barrier overhead to the write-side.
The existing applications of which I am aware that would be improved by
this system call are as follows:
* Through Userspace RCU library (http://urcu.so)
- DNS server (Knot DNS) https://www.knot-dns.cz/
- Network sniffer (http://netsniff-ng.org/)
- Distributed object storage (https://sheepdog.github.io/sheepdog/)
- User-space tracing (http://lttng.org)
- Network storage system (https://www.gluster.org/)
- Virtual routers (https://events.linuxfoundation.org/sites/events/files/slides/DPDK_RCU_0MQ.pdf)
- Financial software (https://lkml.org/lkml/2015/3/23/189)
Those projects use RCU in userspace to increase read-side speed and
scalability compared to locking. Especially in the case of RCU used by
libraries, sys_membarrier can speed up the read-side by moving the bulk of
the memory barrier cost to synchronize_rcu().
* Direct users of sys_membarrier
- core dotnet garbage collector (https://github.com/dotnet/coreclr/issues/198)
Microsoft core dotnet GC developers are planning to use the mprotect()
side-effect of issuing memory barriers through IPIs as a way to implement
Windows FlushProcessWriteBuffers() on Linux. They are referring to
sys_membarrier in their github thread, specifically stating that
sys_membarrier() is what they are looking for.
To explain the benefit of this scheme, let's introduce two example threads:
Thread A (non-frequent, e.g. executing liburcu synchronize_rcu())
Thread B (frequent, e.g. executing liburcu
rcu_read_lock()/rcu_read_unlock())
In a scheme where all smp_mb() in thread A are ordering memory accesses
with respect to smp_mb() present in Thread B, we can change each
smp_mb() within Thread A into calls to sys_membarrier() and each
smp_mb() within Thread B into compiler barriers "barrier()".
Before the change, we had, for each smp_mb() pairs:
Thread A Thread B
previous mem accesses previous mem accesses
smp_mb() smp_mb()
following mem accesses following mem accesses
After the change, these pairs become:
Thread A Thread B
prev mem accesses prev mem accesses
sys_membarrier() barrier()
follow mem accesses follow mem accesses
As we can see, there are two possible scenarios: either Thread B memory
accesses do not happen concurrently with Thread A accesses (1), or they
do (2).
1) Non-concurrent Thread A vs Thread B accesses:
Thread A Thread B
prev mem accesses
sys_membarrier()
follow mem accesses
prev mem accesses
barrier()
follow mem accesses
In this case, thread B accesses will be weakly ordered. This is OK,
because at that point, thread A is not particularly interested in
ordering them with respect to its own accesses.
2) Concurrent Thread A vs Thread B accesses
Thread A Thread B
prev mem accesses prev mem accesses
sys_membarrier() barrier()
follow mem accesses follow mem accesses
In this case, thread B accesses, which are ensured to be in program
order thanks to the compiler barrier, will be "upgraded" to full
smp_mb() by synchronize_sched().
* Benchmarks
On Intel Xeon E5405 (8 cores)
(one thread is calling sys_membarrier, the other 7 threads are busy
looping)
1000 non-expedited sys_membarrier calls in 33s =3D 33 milliseconds/call.
* User-space user of this system call: Userspace RCU library
Both the signal-based and the sys_membarrier userspace RCU schemes
permit us to remove the memory barrier from the userspace RCU
rcu_read_lock() and rcu_read_unlock() primitives, thus significantly
accelerating them. These memory barriers are replaced by compiler
barriers on the read-side, and all matching memory barriers on the
write-side are turned into an invocation of a memory barrier on all
active threads in the process. By letting the kernel perform this
synchronization rather than dumbly sending a signal to every process
threads (as we currently do), we diminish the number of unnecessary wake
ups and only issue the memory barriers on active threads. Non-running
threads do not need to execute such barrier anyway, because these are
implied by the scheduler context switches.
Results in liburcu:
Operations in 10s, 6 readers, 2 writers:
memory barriers in reader: 1701557485 reads, 2202847 writes
signal-based scheme: 9830061167 reads, 6700 writes
sys_membarrier: 9952759104 reads, 425 writes
sys_membarrier (dyn. check): 7970328887 reads, 425 writes
The dynamic sys_membarrier availability check adds some overhead to
the read-side compared to the signal-based scheme, but besides that,
sys_membarrier slightly outperforms the signal-based scheme. However,
this non-expedited sys_membarrier implementation has a much slower grace
period than signal and memory barrier schemes.
Besides diminishing the number of wake-ups, one major advantage of the
membarrier system call over the signal-based scheme is that it does not
need to reserve a signal. This plays much more nicely with libraries,
and with processes injected into for tracing purposes, for which we
cannot expect that signals will be unused by the application.
An expedited version of this system call can be added later on to speed
up the grace period. Its implementation will likely depend on reading
the cpu_curr()->mm without holding each CPU's rq lock.
This patch adds the system call to x86 and to asm-generic.
[1] http://urcu.so
membarrier(2) man page:
MEMBARRIER(2) Linux Programmer's Manual MEMBARRIER(2)
NAME
membarrier - issue memory barriers on a set of threads
SYNOPSIS
#include <linux/membarrier.h>
int membarrier(int cmd, int flags);
DESCRIPTION
The cmd argument is one of the following:
MEMBARRIER_CMD_QUERY
Query the set of supported commands. It returns a bitmask of
supported commands.
MEMBARRIER_CMD_SHARED
Execute a memory barrier on all threads running on the system.
Upon return from system call, the caller thread is ensured that
all running threads have passed through a state where all memory
accesses to user-space addresses match program order between
entry to and return from the system call (non-running threads
are de facto in such a state). This covers threads from all pro=E2=80=90
cesses running on the system. This command returns 0.
The flags argument needs to be 0. For future extensions.
All memory accesses performed in program order from each targeted
thread is guaranteed to be ordered with respect to sys_membarrier(). If
we use the semantic "barrier()" to represent a compiler barrier forcing
memory accesses to be performed in program order across the barrier,
and smp_mb() to represent explicit memory barriers forcing full memory
ordering across the barrier, we have the following ordering table for
each pair of barrier(), sys_membarrier() and smp_mb():
The pair ordering is detailed as (O: ordered, X: not ordered):
barrier() smp_mb() sys_membarrier()
barrier() X X O
smp_mb() X O O
sys_membarrier() O O O
RETURN VALUE
On success, these system calls return zero. On error, -1 is returned,
and errno is set appropriately. For a given command, with flags
argument set to 0, this system call is guaranteed to always return the
same value until reboot.
ERRORS
ENOSYS System call is not implemented.
EINVAL Invalid arguments.
Linux 2015-04-15 MEMBARRIER(2)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nicholas Miell <nmiell@comcast.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two kexec load syscalls, kexec_load another and kexec_file_load.
kexec_file_load has been splited as kernel/kexec_file.c. In this patch I
split kexec_load syscall code to kernel/kexec.c.
And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and
use kexec_file_load only, or vice verse.
The original requirement is from Ted Ts'o, he want kexec kernel signature
being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use
kexec_load syscall can bypass the checking.
Vivek Goyal proposed to create a common kconfig option so user can compile
in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects
KEXEC_CORE so that old config files still work.
Because there's general code need CONFIG_KEXEC_CORE, so I updated all the
architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects
KEXEC_CORE in arch Kconfig. Also updated general kernel code with to
kexec_load syscall.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We need to launch the usermodehelper kernel threads with the widest
affinity and this is partly why we use khelper. This workqueue has
unbound properties and thus a wide affinity inherited by all its children.
Now khelper also has special properties that we aren't much interested in:
ordered and singlethread. There is really no need about ordering as all
we do is creating kernel threads. This can be done concurrently. And
singlethread is a useless limitation as well.
The workqueue engine already proposes generic unbound workqueues that
don't share these useless properties and handle well parallel jobs.
The only worrysome specific is their affinity to the node of the current
CPU. It's fine for creating the usermodehelper kernel threads but those
inherit this affinity for longer jobs such as requesting modules.
This patch proposes to use these node affine unbound workqueues assuming
that a node is sufficient to handle several parallel usermodehelper
requests.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"Highlights:
- PKCS#7 support added to support signed kexec, also utilized for
module signing. See comments in 3f1e1bea.
** NOTE: this requires linking against the OpenSSL library, which
must be installed, e.g. the openssl-devel on Fedora **
- Smack
- add IPv6 host labeling; ignore labels on kernel threads
- support smack labeling mounts which use binary mount data
- SELinux:
- add ioctl whitelisting (see
http://kernsec.org/files/lss2015/vanderstoep.pdf)
- fix mprotect PROT_EXEC regression caused by mm change
- Seccomp:
- add ptrace options for suspend/resume"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (57 commits)
PKCS#7: Add OIDs for sha224, sha284 and sha512 hash algos and use them
Documentation/Changes: Now need OpenSSL devel packages for module signing
scripts: add extract-cert and sign-file to .gitignore
modsign: Handle signing key in source tree
modsign: Use if_changed rule for extracting cert from module signing key
Move certificate handling to its own directory
sign-file: Fix warning about BIO_reset() return value
PKCS#7: Add MODULE_LICENSE() to test module
Smack - Fix build error with bringup unconfigured
sign-file: Document dependency on OpenSSL devel libraries
PKCS#7: Appropriately restrict authenticated attributes and content type
KEYS: Add a name for PKEY_ID_PKCS7
PKCS#7: Improve and export the X.509 ASN.1 time object decoder
modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYS
extract-cert: Cope with multiple X.509 certificates in a single file
sign-file: Generate CMS message as signature instead of PKCS#7
PKCS#7: Support CMS messages also [RFC5652]
X.509: Change recorded SKID & AKID to not include Subject or Issuer
PKCS#7: Check content type and versions
MAINTAINERS: The keyrings mailing list has moved
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
|
|
Merge patch-bomb from Andrew Morton:
- a few misc things
- Andy's "ambient capabilities"
- fs/nofity updates
- the ocfs2 queue
- kernel/watchdog.c updates and feature work.
- some of MM. Includes Andrea's userfaultfd feature.
[ Hadn't noticed that userfaultfd was 'default y' when applying the
patches, so that got fixed in this merge instead. We do _not_ mark
new features that nobody uses yet 'default y' - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm/hugetlb.c: make vma_has_reserves() return bool
mm/madvise.c: make madvise_behaviour_valid() return bool
mm/memory.c: make tlb_next_batch() return bool
mm/dmapool.c: change is_page_busy() return from int to bool
mm: remove struct node_active_region
mremap: simplify the "overlap" check in mremap_to()
mremap: don't do uneccesary checks if new_len == old_len
mremap: don't do mm_populate(new_addr) on failure
mm: move ->mremap() from file_operations to vm_operations_struct
mremap: don't leak new_vma if f_op->mremap() fails
mm/hugetlb.c: make vma_shareable() return bool
mm: make GUP handle pfn mapping unless FOLL_GET is requested
mm: fix status code which move_pages() returns for zero page
mm: memcontrol: bring back the VM_BUG_ON() in mem_cgroup_swapout()
genalloc: add support of multiple gen_pools per device
genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()
mm/memblock: WARN_ON when nid differs from overlap region
Documentation/features/vm: add feature description and arch support status for batched TLB flush after unmap
mm: defer flush of writable TLB entries
mm: send one IPI per CPU to TLB flush all entries after unmapping pages
...
|
|
An IPI is sent to flush remote TLBs when a page is unmapped that was
potentially accesssed by other CPUs. There are many circumstances where
this happens but the obvious one is kswapd reclaiming pages belonging to a
running process as kswapd and the task are likely running on separate
CPUs.
On small machines, this is not a significant problem but as machine gets
larger with more cores and more memory, the cost of these IPIs can be
high. This patch uses a simple structure that tracks CPUs that
potentially have TLB entries for pages being unmapped. When the unmapping
is complete, the full TLB is flushed on the assumption that a refill cost
is lower than flushing individual entries.
Architectures wishing to do this must give the following guarantee.
If a clean page is unmapped and not immediately flushed, the
architecture must guarantee that a write to that linear address
from a CPU with a cached TLB entry will trap a page fault.
This is essentially what the kernel already depends on but the window is
much larger with this patch applied and is worth highlighting. The
architecture should consider whether the cost of the full TLB flush is
higher than sending an IPI to flush each individual entry. An additional
architecture helper called flush_tlb_local is required. It's a trivial
wrapper with some accounting in the x86 case.
The impact of this patch depends on the workload as measuring any benefit
requires both mapped pages co-located on the LRU and memory pressure. The
case with the biggest impact is multiple processes reading mapped pages
taken from the vm-scalability test suite. The test case uses NR_CPU
readers of mapped files that consume 10*RAM.
Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%)
Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%)
Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 581.00 611.43
System 5804.93 4111.76
Elapsed 161.03 122.12
This is showing that the readers completed 24.40% faster with 29% less
system CPU time. From vmstats, it is known that the vanilla kernel was
interrupted roughly 900K times per second during the steady phase of the
test and the patched kernel was interrupts 180K times per second.
The impact is lower on a single socket machine.
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%)
Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%)
Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 58.09 57.64
System 111.82 76.56
Elapsed 27.29 22.55
It's still a noticeable improvement with vmstat showing interrupts went
from roughly 500K per second to 45K per second.
The patch will have no impact on workloads with no memory pressure or have
relatively few mapped pages. It will have an unpredictable impact on the
workload running on the CPU being flushed as it'll depend on how many TLB
entries need to be refilled and how long that takes. Worst case, the TLB
will be completely cleared of active entries when the target PFNs were not
resident at all.
[sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This allows to select the userfaultfd during configuration to build it.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- a new PIDs controller is added. It turns out that PIDs are actually
an independent resource from kmem due to the limited PID space.
- more core preparations for the v2 interface. Once cpu side interface
is settled, it should be ready for lifting the devel mask.
for-4.3-unified-base was temporarily branched so that other trees
(block) can pull cgroup core changes that blkcg changes depend on.
- a non-critical idr_preload usage bug fix.
* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: pids: fix invalid get/put usage
cgroup: introduce cgroup_subsys->legacy_name
cgroup: don't print subsystems for the default hierarchy
cgroup: make cftype->private a unsigned long
cgroup: export cgrp_dfl_root
cgroup: define controller file conventions
cgroup: fix idr_preload usage
cgroup: add documentation for the PIDs controller
cgroup: implement the PIDs subsystem
cgroup: allow a cgroup subsystem to reject a fork
|
|
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional
user of percpu_rw_semaphore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
Move certificate handling out of the kernel/ directory and into a certs/
directory to get all the weird stuff in one place and move the generated
signing keys into this directory.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
The revised sign-file program is no longer a script that wraps the openssl
program, but now rather a program that makes use of OpenSSL's crypto
library. This means that to build the sign-file program, the kernel build
process now has a dependency on the OpenSSL development packages in
addition to OpenSSL itself.
Document this in Kconfig and in module-signing.txt.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:
- The combination of tree geometry-initialization simplifications
and OS-jitter-reduction changes to expedited grace periods.
These two are stacked due to the large number of conflicts
that would otherwise result.
[ With one addition, a temporary commit to silence a lockdep false
positive. Additional changes to the expedited grace-period
primitives (queued for 4.4) remove the cause of this false
positive, and therefore include a revert of this temporary commit. ]
- Documentation updates.
- Torture-test updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Let the user explicitly provide a file containing trusted keys, instead of
just automatically finding files matching *.x509 in the build tree and
trusting whatever we find. This really ought to be an *explicit*
configuration, and the build rules for dealing with the files were
fairly painful too.
Fix applied from James Morris that removes an '=' from a macro definition
in kernel/Makefile as this is a feature that only exists from GNU make 3.82
onwards.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The current rule for generating signing_key.priv and signing_key.x509 is
a classic example of a bad rule which has a tendency to break parallel
make. When invoked to create *either* target, it generates the other
target as a side-effect that make didn't predict.
So let's switch to using a single file signing_key.pem which contains
both key and certificate. That matches what we do in the case of an
external key specified by CONFIG_MODULE_SIG_KEY anyway, so it's also
slightly cleaner.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Where an external PEM file or PKCS#11 URI is given, we can get the cert
from it for ourselves instead of making the user drop signing_key.x509
in place for us.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Extract the function that drives the PKCS#7 signature verification given a
data blob and a PKCS#7 blob out from the module signing code and lump it with
the system keyring code as it's generic. This makes it independent of module
config options and opens it to use by the firmware loader.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Kyle McMartin <kyle@kernel.org>
|
|
Move to using PKCS#7 messages as module signatures because:
(1) We have to be able to support the use of X.509 certificates that don't
have a subjKeyId set. We're currently relying on this to look up the
X.509 certificate in the trusted keyring list.
(2) PKCS#7 message signed information blocks have a field that supplies the
data required to match with the X.509 certificate that signed it.
(3) The PKCS#7 certificate carries fields that specify the digest algorithm
used to generate the signature in a standardised way and the X.509
certificates specify the public key algorithm in a standardised way - so
we don't need our own methods of specifying these.
(4) We now have PKCS#7 message support in the kernel for signed kexec purposes
and we can make use of this.
To make this work, the old sign-file script has been replaced with a program
that needs compiling in a previous patch. The rules to build it are added
here.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
|
|
Dave Hansen reported the following;
My laptop has been behaving strangely with 4.2-rc2. Once I log
in to my X session, I start getting all kinds of strange errors
from applications and see this in my dmesg:
VFS: file-max limit 8192 reached
The problem is that the file-max is calculated before memory is fully
initialised and miscalculates how much memory the kernel is using. This
patch recalculates file-max after deferred memory initialisation. Note
that using memory hotplug infrastructure would not have avoided this
problem as the value is not recalculated after memory hot-add.
4.1: files_stat.max_files = 6582781
4.2-rc2: files_stat.max_files = 8192
4.2-rc2 patched: files_stat.max_files = 6562467
Small differences with the patch applied and 4.1 but not enough to matter.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Cc: Nicolai Stange <nicstange@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alex Ng <alexng@microsoft.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit prevents Kconfig from asking the user about RCU_NOCB_CPU
unless the user really wants to be asked.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Adds a new single-purpose PIDs subsystem to limit the number of
tasks that can be forked inside a cgroup. Essentially this is an
implementation of RLIMIT_NPROC that applies to a cgroup rather than a
process tree.
However, it should be noted that organisational operations (adding and
removing tasks from a PIDs hierarchy) will *not* be prevented. Rather,
the number of tasks in the hierarchy cannot exceed the limit through
forking. This is due to the fact that, in the unified hierarchy, attach
cannot fail (and it is not possible for a task to overcome its PIDs
cgroup policy limit by attaching to a child cgroup -- even if migrating
mid-fork it must be able to fork in the parent first).
PIDs are fundamentally a global resource, and it is possible to reach
PID exhaustion inside a cgroup without hitting any reasonable kmemcg
policy. Once you've hit PID exhaustion, you're only in a marginally
better state than OOM. This subsystem allows PID exhaustion inside a
cgroup to be prevented.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The RCU_USER_QS Kconfig parameter is now just a synonym for NO_HZ_FULL,
so this commit eliminates RCU_USER_QS, replacing all uses with NO_HZ_FULL.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
|
