summaryrefslogtreecommitdiff
path: root/kernel/debug
AgeCommit message (Collapse)Author
2018-05-30Merge 4.4.134 into android-4.4Greg Kroah-Hartman
Changes in 4.4.134 MIPS: ptrace: Expose FIR register through FP regset MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable" affs_lookup(): close a race with affs_remove_link() aio: fix io_destroy(2) vs. lookup_ioctx() race ALSA: timer: Fix pause event notification mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register libata: Blacklist some Sandisk SSDs for NCQ libata: blacklist Micron 500IT SSD with MU01 firmware xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent Revert "ipc/shm: Fix shmat mmap nil-page protection" ipc/shm: fix shmat() nil address after round-down when remapping kasan: fix memory hotplug during boot kernel/sys.c: fix potential Spectre v1 issue kernel/signal.c: avoid undefined behaviour in kill_something_info xfs: remove racy hasattr check from attr ops do d_instantiate/unlock_new_inode combinations safely firewire-ohci: work around oversized DMA reads on JMicron controllers NFSv4: always set NFS_LOCK_LOST when a lock is lost. ALSA: hda - Use IS_REACHABLE() for dependency on input ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read() kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account PCI: Add function 1 DMA alias quirk for Marvell 9128 tools lib traceevent: Simplify pointer print logic and fix %pF perf callchain: Fix attr.sample_max_stack setting tools lib traceevent: Fix get_field_str() for dynamic strings dm thin: fix documentation relative to low water mark threshold nfs: Do not convert nfs_idmap_cache_timeout to jiffies watchdog: sp5100_tco: Fix watchdog disable bit kconfig: Don't leak main menus during parsing kconfig: Fix automatic menu creation mem leak kconfig: Fix expr_free() E_NOT leak mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl() ipmi/powernv: Fix error return code in ipmi_powernv_probe() Btrfs: set plug for fsync btrfs: Fix out of bounds access in btrfs_search_slot Btrfs: fix scrub to repair raid6 corruption scsi: fas216: fix sense buffer initialization HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/numa: Ensure nodes initialized for hotplug RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure ntb_transport: Fix bug with max_mw_size parameter ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute ocfs2: return error when we attempt to access a dirty bh in jbd2 mm/mempolicy: fix the check of nodemask from user mm/mempolicy: add nodes_empty check in SYSC_migrate_pages asm-generic: provide generic_pmdp_establish() mm: pin address_space before dereferencing it while isolating an LRU page IB/ipoib: Fix for potential no-carrier state x86/power: Fix swsusp_arch_resume prototype firmware: dmi_scan: Fix handling of empty DMI strings ACPI: processor_perflib: Do not send _PPC change notification if not ready bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS xen-netfront: Fix race between device setup and open xen/grant-table: Use put_page instead of free_page RDS: IB: Fix null pointer issue arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics proc: fix /proc/*/map_files lookup cifs: silence compiler warnings showing up with gcc-8.0.0 bcache: properly set task state in bch_writeback_thread() bcache: fix for allocator and register thread race bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist tools/libbpf: handle issues with bpf ELF objects containing .eh_frames locking/qspinlock: Ensure node->count is updated before initialising node irqchip/gic-v3: Change pr_debug message to pr_devel scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() ARC: Fix malformed ARC_EMUL_UNALIGNED default usb: gadget: f_uac2: fix bFirstInterface in composite gadget usb: gadget: fsl_udc_core: fix ep valid checks usb: dwc2: Fix dwc2_hsotg_core_init_disconnected() selftests: memfd: add config fragment for fuse scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: aacraid: fix shutdown crash when init fails scsi: qla4xxx: skip error recovery in case of register disconnect. ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt ARM: OMAP3: Fix prm wake interrupt for resume ARM: OMAP1: clock: Fix debugfs_create_*() usage NFC: llcp: Limit size of SDP URI mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 md raid10: fix NULL deference in handle_write_completed() drm/exynos: fix comparison to bitshift when dealing with a mask usb: musb: fix enumeration after resume locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() md: raid5: avoid string overflow warning kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access s390/cio: fix return code after missing interrupt s390/cio: clear timer when terminating driver I/O ARM: OMAP: Fix dmtimer init for omap1 smsc75xx: fix smsc75xx_set_features() regulatory: add NUL to request alpha2 locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations media: dmxdev: fix error code for invalid ioctls md/raid1: fix NULL pointer dereference batman-adv: fix packet checksum in receive path batman-adv: invalidate checksum on fragment reassembly netfilter: ebtables: convert BUG_ONs to WARN_ONs nvme-pci: Fix nvme queue cleanup if IRQ setup fails clocksource/drivers/fsl_ftm_timer: Fix error return checking r8152: fix tx packets accounting virtio-gpu: fix ioctl and expose the fixed status to userspace. dmaengine: rcar-dmac: fix max_chunk_size for R-Car Gen3 bcache: fix kcrashes with fio in RAID5 backend dev sit: fix IFLA_MTU ignored on NEWLINK gianfar: Fix Rx byte accounting for ndev stats net/tcp/illinois: replace broken algorithm reference link xen/pirq: fix error path cleanup when binding MSIs Btrfs: send, fix issuing write op when processing hole in no data mode selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable KVM: PPC: Book3S HV: Fix VRMA initialization with 2MB or 1GB memory backing watchdog: f71808e_wdt: Fix magic close handling e1000e: Fix check_for_link return value with autoneg off e1000e: allocate ring descriptors with dma_zalloc_coherent usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM scsi: sd: Keep disk read-only when re-reading partition fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper(). xen: xenbus: use put_device() instead of kfree() USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM netfilter: ebtables: fix erroneous reject of last rule bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa(). workqueue: use put_device() instead of kfree() ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu sunvnet: does not support GSO for sctp net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off batman-adv: fix header size check in batadv_dbg_arp() vti4: Don't count header length twice on tunnel setup vti4: Don't override MTU passed on link creation via IFLA_MTU perf/cgroup: Fix child event counting bug RDMA/ucma: Correct option size check using optlen mm/mempolicy.c: avoid use uninitialized preferred_node selftests: ftrace: Add probe event argument syntax testcase selftests: ftrace: Add a testcase for string type with kprobe_event selftests: ftrace: Add a testcase for probepoint batman-adv: fix multicast-via-unicast transmission with AP isolation batman-adv: fix packet loss for broadcasted DHCP packets to a server ARM: 8748/1: mm: Define vdso_start, vdso_end as array net: qmi_wwan: add BroadMobi BM806U 2020:2033 net/usb/qmi_wwan.c: Add USB id for lt4120 modem net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 llc: properly handle dev_queue_xmit() return value mm/kmemleak.c: wait for scan completion before disabling free net: Fix untag for vlan packets without ethernet header net: mvneta: fix enable of all initialized RXQs sh: fix debug trap failure to process signals before return to user x86/pgtable: Don't set huge PUD/PMD on non-leaf entries fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table swap: divide-by-zero when zero length swap file on ssd sr: get/drop reference to device in revalidate and check_events Force log to disk before reading the AGF during a fstrim cpufreq: CPPC: Initialize shared perf capabilities of CPUs scsi: aacraid: Insure command thread is not recursively stopped dp83640: Ensure against premature access to PHY registers after reset mm/ksm: fix interaction with THP mm: fix races between address_space dereference and free in page_evicatable Btrfs: bail out on error during replay_dir_deletes Btrfs: fix NULL pointer dereference in log_dir_items btrfs: Fix possible softlock on single core machines ocfs2/dlm: don't handle migrate lockres if already in shutdown sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning KVM: VMX: raise internal error for exception during invalid protected mode state fscache: Fix hanging wait on page discarded by writeback sparc64: Make atomic_xchg() an inline function rather than a macro. rtc: snvs: Fix usage of snvs_rtc_enable net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB btrfs: tests/qgroup: Fix wrong tree backref level Btrfs: fix copy_items() return value when logging an inode btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers xen/acpi: off by one in read_acpi_id() ACPI: acpi_pad: Fix memory leak in power saving threads powerpc/mpic: Check if cpu_possible() in mpic_physmask() m68k: set dma and coherent masks for platform FEC ethernets parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode hwmon: (nct6775) Fix writing pwmX_mode rtc: hctosys: Ensure system time doesn't overflow time_t powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer powerpc/perf: Fix kernel address leak via sampling registers tools/thermal: tmon: fix for segfault selftests: Print the test we're running to /dev/kmsg net/mlx5: Protect from command bit overflow ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) ima: Fix Kconfig to select TPM 2.0 CRB interface ima: Fallback to the builtin hash algorithm virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS arm: dts: socfpga: fix GIC PPI warning usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields cpufreq: cppc_cpufreq: Fix cppc_cpufreq_init() failure path clk: Don't show the incorrect clock phase zorro: Set up z->dev.dma_mask for the DMA API bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set ACPICA: Events: add a return on failure from acpi_hw_register_read ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c i2c: mv64xxx: Apply errata delay only in standard mode KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use xhci: zero usb device slot_id member when disabling and freeing a xhci slot MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset PCI: Restore config space on runtime resume despite being unbound ipmi_ssif: Fix kernel panic at msg_done_handler usb: dwc2: Fix interval type issue usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS usb: gadget: ffs: Execute copy_to_user() with USER_DS set powerpc: Add missing prototype for arch_irq_work_raise() ASoC: topology: create TLV data for dapm widgets perf/core: Fix perf_output_read_group() hwmon: (pmbus/max8688) Accept negative page register values hwmon: (pmbus/adm1275) Accept negative page register values cdrom: do not call check_disk_change() inside cdrom_open() gfs2: Fix fallocate chunk size usb: gadget: udc: change comparison to bitshift when dealing with a mask usb: gadget: composite: fix incorrect handling of OS desc requests x86/devicetree: Initialize device tree before using it x86/devicetree: Fix device IRQ settings in DT ALSA: vmaster: Propagate slave error media: cx23885: Override 888 ImpactVCBe crystal frequency media: cx23885: Set subdev host data to clk_freq pointer media: s3c-camif: fix out-of-bounds array access dmaengine: pl330: fix a race condition in case of threaded irqs media: em28xx: USB bulk packet size fix clk: rockchip: Prevent calculating mmc phase if clock rate is zero enic: enable rq before updating rq descriptors hwrng: stm32 - add reset during probe staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr rtc: tx4939: avoid unintended sign extension on a 24 bit shift serial: xuartps: Fix out-of-bounds access through DT alias serial: samsung: Fix out-of-bounds access through serial port index serial: mxs-auart: Fix out-of-bounds access through serial port index serial: imx: Fix out-of-bounds access through serial port index serial: fsl_lpuart: Fix out-of-bounds access through DT alias serial: arc_uart: Fix out-of-bounds access through DT alias PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 udf: Provide saner default for invalid uid / gid media: cx25821: prevent out-of-bounds read on array card clk: samsung: s3c2410: Fix PLL rates clk: samsung: exynos5260: Fix PLL rates clk: samsung: exynos5433: Fix PLL rates clk: samsung: exynos5250: Fix PLL rates clk: samsung: exynos3250: Fix PLL rates crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss audit: return on memory error to avoid null pointer dereference MIPS: Octeon: Fix logging messages with spurious periods after newlines drm/rockchip: Respect page offset for PRIME mmap calls x86/apic: Set up through-local-APIC mode on the boot CPU if 'noapic' specified perf tests: Use arch__compare_symbol_names to compare symbols perf report: Fix memory corruption in --branch-history mode --branch-history selftests/net: fixes psock_fanout eBPF test case netlabel: If PF_INET6, check sk_buff ip header version scsi: lpfc: Fix issue_lip if link is disabled scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing scsi: lpfc: Fix frequency of Release WQE CQEs regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()' ASoC: samsung: i2s: Ensure the RCLK rate is properly determined Bluetooth: btusb: Add device ID for RTL8822BE kdb: make "mdr" command repeat s390/ftrace: use expoline for indirect branches Linux 4.4.134 Change-Id: Iababaf9b89bc8d0437b95e1368d8b0a9126a178c Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2018-05-30kdb: make "mdr" command repeatRandy Dunlap
[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18Merge 4.4.106 into android-4.4Greg Kroah-Hartman
Changes in 4.4.106 can: ti_hecc: Fix napi poll return value for repoll can: kvaser_usb: free buf in error paths can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback() can: kvaser_usb: ratelimit errors if incomplete messages are received can: kvaser_usb: cancel urb on -EPIPE and -EPROTO can: ems_usb: cancel urb on -EPIPE and -EPROTO can: esd_usb2: cancel urb on -EPIPE and -EPROTO can: usb_8dev: cancel urb on -EPIPE and -EPROTO virtio: release virtio index when fail to device_register hv: kvp: Avoid reading past allocated blocks from KVP file isa: Prevent NULL dereference in isa_bus driver callbacks scsi: libsas: align sata_device's rps_resp on a cacheline efi: Move some sysfs files to be read-only by root ASN.1: fix out-of-bounds read when parsing indefinite length item ASN.1: check for error from ASN1_OP_END__ACT actions X.509: reject invalid BIT STRING for subjectPublicKey x86/PCI: Make broadcom_postcore_init() check acpi_disabled ALSA: pcm: prevent UAF in snd_pcm_info ALSA: seq: Remove spurious WARN_ON() at timer check ALSA: usb-audio: Fix out-of-bound error ALSA: usb-audio: Add check return value for usb_string() iommu/vt-d: Fix scatterlist offset handling s390: fix compat system call table kdb: Fix handling of kallsyms_symbol_next() return value drm: extra printk() wrapper macros drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU media: dvb: i2c transfers over usb cannot be done from stack arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one KVM: VMX: remove I/O port 0x80 bypass on Intel hosts arm64: fpsimd: Prevent registers leaking from dead tasks ARM: BUG if jumping to usermode address in kernel mode ARM: avoid faulting on qemu scsi: storvsc: Workaround for virtual DVD SCSI version thp: reduce indentation level in change_huge_pmd() thp: fix MADV_DONTNEED vs. numa balancing race mm: drop unused pmdp_huge_get_and_clear_notify() Revert "drm/armada: Fix compile fail" Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA" Revert "s390/kbuild: enable modversions for symbols exported from asm" vti6: Don't report path MTU below IPV6_MIN_MTU. ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure x86/hpet: Prevent might sleep splat on resume selftest/powerpc: Fix false failures for skipped tests module: set __jump_table alignment to 8 ARM: OMAP2+: Fix device node reference counts ARM: OMAP2+: Release device node after it is no longer needed. gpio: altera: Use handle_level_irq when configured as a level_high HID: chicony: Add support for another ASUS Zen AiO keyboard usb: gadget: configs: plug memory leak USB: gadgetfs: Fix a potential memory leak in 'dev_config()' kvm: nVMX: VMCLEAR should not cause the vCPU to shut down libata: drop WARN from protocol error in ata_sff_qc_issue() workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters irqchip/crossbar: Fix incorrect type of register size KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset arm: KVM: Survive unknown traps from guests arm64: KVM: Survive unknown traps from guests spi_ks8995: fix "BUG: key accdaa28 not in .data!" bnx2x: prevent crash when accessing PTP with interface down bnx2x: fix possible overrun of VFPF multicast addresses array bnx2x: do not rollback VF MAC/VLAN filters we did not configure ipv6: reorder icmpv6_init() and ip6_mr_init() crypto: s5p-sss - Fix completing crypto request in IRQ handler i2c: riic: fix restart condition zram: set physical queue limits to avoid array out of bounds accesses netfilter: don't track fragmented packets axonram: Fix gendisk handling drm/amd/amdgpu: fix console deadlock if late init failed powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro EDAC, i5000, i5400: Fix definition of NRECMEMB register kbuild: pkg: use --transform option to prefix paths in tar mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl() route: also update fnhe_genid when updating a route cache route: update fnhe_expires for redirect when the fnhe exists lib/genalloc.c: make the avail variable an atomic_long_t dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0 NFS: Fix a typo in nfs_rename() sunrpc: Fix rpc_task_begin trace point block: wake up all tasks blocked in get_request() sparc64/mm: set fields in deferred pages sctp: do not free asoc when it is already dead in sctp_sendmsg sctp: use the right sk after waking up from wait_buf sleep atm: horizon: Fix irq release error jump_label: Invoke jump_label_test() via early_initcall() xfrm: Copy policy family in clone_policy IB/mlx4: Increase maximal message size under UD QP IB/mlx5: Assign send CQ and recv CQ of UMR QP afs: Connect up the CB.ProbeUuid ipvlan: fix ipv6 outbound device audit: ensure that 'audit=1' actually enables audit for PID 1 ipmi: Stop timers before cleaning up the module s390: always save and restore all registers on context switch more bio_map_user_iov() leak fixes tipc: fix memory leak in tipc_accept_from_sock() rds: Fix NULL pointer dereference in __rds_rdma_map sit: update frag_off info packet: fix crash in fanout_demux_rollover() net/packet: fix a race in packet_bind() and packet_notifier() Revert "x86/efi: Build our own page table structures" Revert "x86/efi: Hoist page table switching code into efi_call_virt()" Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers" arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping Linux 4.4.106 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2017-12-16kdb: Fix handling of kallsyms_symbol_next() return valueDaniel Thompson
commit c07d35338081d107e57cf37572d8cc931a8e32e2 upstream. kallsyms_symbol_next() returns a boolean (true on success). Currently kdb_read() tests the return value with an inequality that unconditionally evaluates to true. This is fixed in the obvious way and, since the conditional branch is supposed to be unreachable, we also add a WARN_ON(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-09Merge tag 'v4.4.40' into android-4.4.yDmitry Shmidt
This is the 4.4.40 stable release
2017-01-06kernel/debug/debug_core.c: more properly delay for secondary CPUsDouglas Anderson
commit 2d13bb6494c807bcf3f78af0e96c0b8615a94385 upstream. We've got a delay loop waiting for secondary CPUs. That loop uses loops_per_jiffy. However, loops_per_jiffy doesn't actually mean how many tight loops make up a jiffy on all architectures. It is quite common to see things like this in the boot log: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) In my case I was seeing lots of cases where other CPUs timed out entering the debugger only to print their stack crawls shortly after the kdb> prompt was written. Elsewhere in kgdb we already use udelay(), so that should be safe enough to use to implement our timeout. We'll delay 1 ms for 1000 times, which should give us a full second of delay (just like the old code wanted) but allow us to notice that we're done every 1 ms. [akpm@linux-foundation.org: simplifications, per Daniel] Link: http://lkml.kernel.org/r/1477091361-2039-1-git-send-email-dianders@chromium.org Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23UPSTREAM: mm/init: Add 'rodata=off' boot cmdline parameter to disable ↵Kees Cook
read-only kernel mappings It may be useful to debug writes to the readonly sections of memory, so provide a cmdline "rodata=off" to allow for this. This can be expanded in the future to support "log" and "write" modes, but that will need to be architecture-specific. This also makes KDB software breakpoints more usable, as read-only mappings can now be disabled on any kernel. Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Cc: linux-arch <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1455748879-21872-3-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Bug: 31660652 Change-Id: I67b818ca390afdd42ab1c27cb4f8ac64bbdb3b65 (cherry picked from commit d2aa1acad22f1bdd0cfa67b3861800e392254454) Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
2016-02-16kdb: support new lines without carriage returnsColin Cross
kdb expects carriage returns through the serial port to terminate commands. Modify it to accept the first seen carriage return or new line as a terminator, but not treat \r\n as two terminators. Change-Id: I06166017e7703d24310eefcb71c3a7d427088db7 Signed-off-by: Colin Cross <ccross@android.com>
2015-02-19debug: prevent entering debug mode on panic/exception.Colin Cross
On non-developer devices, kgdb prevents the device from rebooting after a panic. Incase of panics and exceptions, to allow the device to reboot, prevent entering debug mode to avoid getting stuck waiting for the user to interact with debugger. To avoid entering the debugger on panic/exception without any extra configuration, panic_timeout is being used which can be set via /proc/sys/kernel/panic at run time and CONFIG_PANIC_TIMEOUT sets the default value. Setting panic_timeout indicates that the user requested machine to perform unattended reboot after panic. We dont want to get stuck waiting for the user input incase of panic. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: kgdb-bugreport@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: Android Kernel Team <kernel-team@android.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Colin Cross <ccross@android.com> [Kiran: Added context to commit message. panic_timeout is used instead of break_on_panic and break_on_exception to honor CONFIG_PANIC_TIMEOUT Modified the commit as per community feedback] Signed-off-by: Kiran Raparthy <kiran.kumar@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Const qualifier for kdb_getstr's prompt argumentDaniel Thompson
All current callers of kdb_getstr() can pass constant pointers via the prompt argument. This patch adds a const qualification to make explicit the fact that this is safe. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Provide forward search at more promptDaniel Thompson
Currently kdb allows the output of comamnds to be filtered using the | grep feature. This is useful but does not permit the output emitted shortly after a string match to be examined without wading through the entire unfiltered output of the command. Such a feature is particularly useful to navigate function traces because these traces often have a useful trigger string *before* the point of interest. This patch reuses the existing filtering logic to introduce a simple forward search to kdb that can be triggered from the more prompt. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Fix a prompt management bug when using | grepDaniel Thompson
Currently when the "| grep" feature is used to filter the output of a command then the prompt is not displayed for the subsequent command. Likewise any characters typed by the user are also not echoed to the display. This rather disconcerting problem eventually corrects itself when the user presses Enter and the kdb_grepping_flag is cleared as kdb_parse() tries to make sense of whatever they typed. This patch resolves the problem by moving the clearing of this flag from the middle of command processing to the beginning. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Remove stack dump when entering kgdb due to NMIDaniel Thompson
Issuing a stack dump feels ergonomically wrong when entering due to NMI. Entering due to NMI is normally a reaction to a user request, either the NMI button on a server or a "magic knock" on a UART. Therefore the backtrace behaviour on entry due to NMI should be like SysRq-g (no stack dump) rather than like oops. Note also that the stack dump does not offer any information that cannot be trivial retrieved using the 'bt' command. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Avoid printing KERN_ levels to consolesDaniel Thompson
Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example <SysRq>-h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Fix off by one error in kdb_cpu()Jason Wessel
There was a follow on replacement patch against the prior "kgdb: Timeout if secondary CPUs ignore the roundup". See: https://lkml.org/lkml/2015/1/7/442 This patch is the delta vs the patch that was committed upstream: * Fix an off-by-one error in kdb_cpu(). * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we really want a static limit. * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c (kgdb-next contains a patch which introduced pr_fmt() to this file to the tag will now be applied automatically). Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: fix incorrect counts in KDB summary command outputJay Lan
The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by: Jay Lan <jlan@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-01-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module and param fixes from Rusty Russell: "Surprising number of fixes this merge window :( The first two are minor fallout from the param rework which went in this merge window. The next three are a series which fixes a longstanding (but never previously reported and unlikely , so no CC stable) race between kallsyms and freeing the init section. Finally, a minor cleanup as our module refcount will now be -1 during unload" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: make module_refcount() a signed integer. module: fix race in kallsyms resolution during module load success. module: remove mod arg from module_free, rename module_memfree(). module_arch_freeing_init(): new hook for archs before module->module_init freed. param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC param: initialize store function to NULL if not available.
2015-01-22module: make module_refcount() a signed integer.Rusty Russell
James Bottomley points out that it will be -1 during unload. It's only used for diagnostics, so let's not hide that as it could be a clue as to what's gone wrong. Cc: Jason Wessel <jason.wessel@windriver.com> Acked-and-documention-added-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Masami Hiramatsu <maasami.hiramatsu.pt@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-11kernel/debug/debug_core.c: Logging clean-upFabian Frederick
-Convert printk( to pr_foo() -Add pr_fmt -Coalesce formats Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kgdb: timeout if secondary CPUs ignore the roundupDaniel Thompson
Currently if an active CPU fails to respond to a roundup request the CPU that requested the roundup will become stuck. This needlessly reduces the robustness of the debugger. This patch introduces a timeout allowing the system state to be examined even when the system contains unresponsive processors. It also modifies kdb's cpu command to make it censor attempts to switch to unresponsive processors and to report their state as (D)ead. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Allow access to sensitive commands to be restricted by defaultDaniel Thompson
Currently kiosk mode must be explicitly requested by the bootloader or userspace. It is convenient to be able to change the default value in a similar manner to CONFIG_MAGIC_SYSRQ_DEFAULT_MASK. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Add enable mask for groups of commandsAnton Vorontsov
Currently all kdb commands are enabled whenever kdb is deployed. This makes it difficult to deploy kdb to help debug certain types of systems. Android phones provide one example; the FIQ debugger found on some Android devices has a deliberately weak set of commands to allow the debugger to enabled very late in the production cycle. Certain kiosk environments offer another interesting case where an engineer might wish to probe the system state using passive inspection commands without providing sufficient power for a passer by to root it. Without any restrictions, obtaining the root rights via KDB is a matter of a few commands, and works everywhere. For example, log in as a normal user: cbou:~$ id uid=1001(cbou) gid=1001(cbou) groups=1001(cbou) Now enter KDB (for example via sysrq): Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry kdb> ps 23 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash 0xffff880007078000 1 0 0 0 S 0xffff8800070782e0 init [...snip...] 0xffff8800065be3c0 918 1 0 0 S 0xffff8800065be6a0 getty 0xffff8800065b9c80 919 1 0 0 S 0xffff8800065b9f60 login 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash All we need is the offset of cred pointers. We can look up the offset in the distro's kernel source, but it is unnecessary. We can just start dumping init's task_struct, until we see the process name: kdb> md 0xffff880007078000 0xffff880007078000 0000000000000001 ffff88000703c000 ................ 0xffff880007078010 0040210000000002 0000000000000000 .....!@......... [...snip...] 0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580 ..>.......>..... 0xffff8800070782c0 0000000074696e69 0000000000000000 init............ ^ Here, 'init'. Creds are just above it, so the offset is 0x02b0. Now we set up init's creds for our non-privileged shell: kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580 0xffff8800065bc9f0 = 0xffff8800073e0580 kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580 0xffff8800065bc9f8 = 0xffff8800073e0580 And thus gaining the root: kdb> go cbou:~$ id uid=0(root) gid=0(root) groups=0(root) cbou:~$ bash root:~# p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS feature availability, I would expect at least some would enable it), so it's not actually some kind of a major issue. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Categorize kdb commands (similar to SysRq categorization)Daniel Thompson
This patch introduces several new flags to collect kdb commands into groups (later allowing them to be optionally disabled). This follows similar prior art to enable/disable magic sysrq commands. The commands have been categorized as follows: Always on: go (w/o args), env, set, help, ?, cpu (w/o args), sr, dmesg, disable_nmi, defcmd, summary, grephelp Mem read: md, mdr, mdp, mds, ef, bt (with args), per_cpu Mem write: mm Reg read: rd Reg write: go (with args), rm Inspect: bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod Flow ctrl: bp, bl, bph, bc, be, bd, ss Signal: kill Reboot: reboot All: cpu, kgdb, (and all of the above), nmi_console Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Remove KDB_REPEAT_NONE flagAnton Vorontsov
Since we now treat KDB_REPEAT_* as flags, there is no need to pass KDB_REPEAT_NONE. It's just the default behaviour when no flags are specified. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Use KDB_REPEAT_* values as flagsAnton Vorontsov
The actual values of KDB_REPEAT_* enum values and overall logic stayed the same, but we now treat the values as flags. This makes it possible to add other flags and combine them, plus makes the code a lot simpler and shorter. But functionality-wise, there should be no changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Rename kdb_register_repeat() to kdb_register_flags()Anton Vorontsov
We're about to add more options for commands behaviour, so let's give a more generic name to the low-level kdb command registration function. There are just various renames, no functional changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flagsAnton Vorontsov
We're about to add more options for command behaviour, so let's expand the meaning of kdb_repeat_t. So far we just do various renames, there should be no functional changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11kdb: Remove currently unused kdbtab_t->cmd_flagsAnton Vorontsov
The struct member is never used in the code, so we can remove it. We will introduce real flags soon by renaming cmd_repeat to cmd_flags. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-10-14kdb: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-12kdb: Use ktime_get_ts()Thomas Gleixner
do_posix_clock_monotonic_gettime() is a leftover from the initial posix timer implementation which maps to ktime_get_ts(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20140611234607.261629142@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-04kernel/printk: use symbolic defines for console loglevelsBorislav Petkov
... instead of naked numbers. Stuff in sysrq.c used to set it to 8 which is supposed to mean above default level so set it to DEBUG instead as we're terminating/killing all tasks and we want to be verbose there. Also, correct the check in x86_64_start_kernel which should be >= as we're clearly issuing the string there for all debug levels, not only the magical 10. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Joe Perches <joe@perches.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-07mm: per-thread vma cachingDavidlohr Bueso
This patch is a continuation of efforts trying to optimize find_vma(), avoiding potentially expensive rbtree walks to locate a vma upon faults. The original approach (https://lkml.org/lkml/2013/11/1/410), where the largest vma was also cached, ended up being too specific and random, thus further comparison with other approaches were needed. There are two things to consider when dealing with this, the cache hit rate and the latency of find_vma(). Improving the hit-rate does not necessarily translate in finding the vma any faster, as the overhead of any fancy caching schemes can be too high to consider. We currently cache the last used vma for the whole address space, which provides a nice optimization, reducing the total cycles in find_vma() by up to 250%, for workloads with good locality. On the other hand, this simple scheme is pretty much useless for workloads with poor locality. Analyzing ebizzy runs shows that, no matter how many threads are running, the mmap_cache hit rate is less than 2%, and in many situations below 1%. The proposed approach is to replace this scheme with a small per-thread cache, maximizing hit rates at a very low maintenance cost. Invalidations are performed by simply bumping up a 32-bit sequence number. The only expensive operation is in the rare case of a seq number overflow, where all caches that share the same address space are flushed. Upon a miss, the proposed replacement policy is based on the page number that contains the virtual address in question. Concretely, the following results are seen on an 80 core, 8 socket x86-64 box: 1) System bootup: Most programs are single threaded, so the per-thread scheme does improve ~50% hit rate by just adding a few more slots to the cache. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 50.61% | 19.90 | | patched | 73.45% | 13.58 | +----------------+----------+------------------+ 2) Kernel build: This one is already pretty good with the current approach as we're dealing with good locality. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 75.28% | 11.03 | | patched | 88.09% | 9.31 | +----------------+----------+------------------+ 3) Oracle 11g Data Mining (4k pages): Similar to the kernel build workload. +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 70.66% | 17.14 | | patched | 91.15% | 12.57 | +----------------+----------+------------------+ 4) Ebizzy: There's a fair amount of variation from run to run, but this approach always shows nearly perfect hit rates, while baseline is just about non-existent. The amounts of cycles can fluctuate between anywhere from ~60 to ~116 for the baseline scheme, but this approach reduces it considerably. For instance, with 80 threads: +----------------+----------+------------------+ | caching scheme | hit-rate | cycles (billion) | +----------------+----------+------------------+ | baseline | 1.06% | 91.54 | | patched | 99.97% | 14.18 | +----------------+----------+------------------+ [akpm@linux-foundation.org: fix nommu build, per Davidlohr] [akpm@linux-foundation.org: document vmacache_valid() logic] [akpm@linux-foundation.org: attempt to untangle header files] [akpm@linux-foundation.org: add vmacache_find() BUG_ON] [hughd@google.com: add vmacache_valid_mm() (from Oleg)] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: adjust and enhance comments] Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-26KGDB: make kgdb_breakpoint() as noinlineVijaya Kumar K
The function kgdb_breakpoint() sets up break point at compile time by calling arch_kgdb_breakpoint(); Though this call is surrounded by wmb() barrier, the compile can still re-order the break point, because this scheduling barrier is not a code motion barrier in gcc. Making kgdb_breakpoint() as noinline solves this problem of code reording around break point instruction and also avoids problem of being called as inline function from other places More details about discussion on this can be found here http://comments.gmane.org/gmane.linux.ports.arm.kernel/269732 Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-01-25kgdb/kdb: Fix no KDB config problemMike Travis
Some code added to the debug_core module had KDB dependencies that it shouldn't have. Move the KDB dependent REASON back to the caller to remove the dependency in the debug core code. Update the call from the UV NMI handler to conform to the new interface. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20140114162551.318251993@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-03kdb: Add support for external NMI handler to call KGDB/KDBMike Travis
This patch adds a kgdb_nmicallin() interface that can be used by external NMI handlers to call the KGDB/KDB handler. The primary need for this is for those types of NMI interrupts where all the CPUs have already received the NMI signal. Therefore no send_IPI(NMI) is required, and in fact it will cause a 2nd unhandled NMI to occur. This generates the "Dazed and Confuzed" messages. Since all the CPUs are getting the NMI at roughly the same time, it's not guaranteed that the first CPU that hits the NMI handler will manage to enter KGDB and set the dbg_master_lock before the slaves start entering. The new argument "send_ready" was added for KGDB to signal the NMI handler to release the slave CPUs for entry into KGDB. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20131002151417.928886849@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-30kgdb/sysrq: fix inconstistent help message of sysrq keyzhangwei(Jovi)
Currently help message of /proc/sysrq-trigger highlight its upper-case characters, like below: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) ... this would confuse user trigger sysrq by upper-case character, which is inconsistent with the real lower-case character registed key. This inconsistent help message will also lead more confused when 26 upper-case letters put into use in future. This patch fix kgdb sysrq key: "debug(g)" Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02Merge tag 'for_linux-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "For a change we removed more code than we added. If people aren't using it we shouldn't be carrying it. :-) Cleanups: - Remove kdb ssb command - there is no in kernel disassembler to support it - Remove kdb ll command - Always caused a kernel oops and there were no bug reports so no one was using this command - Use kernel ARRAY_SIZE macro instead of array computations Fixes: - Stop oops in kdb if user executes kdb_defcmd with args - kdb help command truncated text - ppc64 support for kgdbts - Add missing kconfig option from original kdb port for dealing with catastrophic kernel crashes such that you can reboot automatically on continue from kdb" * tag 'for_linux-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: Remove unhandled ssb command kdb: Prevent kernel oops with kdb_defcmd kdb: Remove the ll command kdb_main: fix help print kdb: Fix overlap in buffers with strcpy Fixed dead ifdef block by adding missing Kconfig option. kdb: Setup basic kdb state before invoking commands via kgdb kdb: use ARRAY_SIZE where possible kgdb/kgdbts: support ppc64 kdb: A fix for kdb command table expansion
2013-03-02kdb: Remove unhandled ssb commandVincent
The 'ssb' command can only be handled when we have a disassembler, to check for branches, so remove the 'ssb' command for now. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Prevent kernel oops with kdb_defcmdJason Wessel
The kdb_defcmd can only be used to display the available command aliases while using the kernel debug shell. If you try to define a new macro while the kernel debugger is active it will oops. The debug shell macros must use pre-allocated memory set aside at the time kdb_init() is run, and the kdb_defcmd is restricted to only working at the time that the kdb_init sequence is being run, which only occurs if you actually activate the kernel debugger. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Remove the ll commandJason Wessel
Recently some code inspection was done after fixing a problem with kmalloc used while in the kernel debugger context (which is not legal), and it turned up the fact that kdb ll command will oops the kernel. Given that there have been zero bug reports on the command combined with the fact it will oops the kernel it is clearly not being used. Instead of fixing it, it will be removed. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb_main: fix help printJason Wessel
The help command was chopping all the usage instructions such that they were not readable. Example: bta [D|R|S|T|C|Z|E|U|I| Backtrace all processes matching state flag per_cpu <sym> [<bytes>] [<c Display per_cpu variables Where as it should look like: bta [D|R|S|T|C|Z|E|U|I|M|A] Backtrace all processes matching state flag per_cpu <sym> [<bytes>] [<cpu>] Display per_cpu variables All that is needed is to check the how long the cmd_usage is and jump to the next line when appropriate. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Fix overlap in buffers with strcpyJason Wessel
Maxime reported that strcpy(s->usage, s->usage+1) has no definitive guarantee that it will work on all archs the same way when you have overlapping memory. The fix is simple for the kdb code because we still have the original string memory in the function scope, so we just have to use that as the argument instead. Reported-by: Maxime Villard <rustyBSD@gmx.fr> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: Setup basic kdb state before invoking commands via kgdbMatt Klein
Although invasive kdb commands are not supported via kgdb, some useful non-invasive commands like bt* require basic kdb state to be setup before calling into the kdb code. Factor out some of this code and call it before and after executing kdb commands via kgdb. Signed-off-by: Matt Klein <mklein@twitter.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: use ARRAY_SIZE where possibleSasha Levin
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-03-02kdb: A fix for kdb command table expansionJohn Blackwood
When locally adding in some additional kdb commands, I stumbled across an issue with the dynamic expansion of the kdb command table. When the number of kdb commands exceeds the size of the statically allocated kdb_base_commands[] array, additional space is allocated in the kdb_register_repeat() routine. The unused portion of the newly allocated array was not being initialized to zero properly and this would result in segfaults when help '?' was executed or when a search for a non-existing command would traverse the command table beyond the end of valid command entries and then attempt to use the non-zeroed area as actual command entries. Signed-off-by: John Blackwood <john.blackwood@ccur.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2013-02-04kgdb: remove #include <linux/serial_8250.h> from kgdb.hGreg Kroah-Hartman
There's no reason kgdb.h itself needs to include the 8250 serial port header file. So push it down to the _very_ limited number of individual drivers that need the values in that file, and fix up the places where people really wanted serial_core.h and platform_device.h. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12module: add new state MODULE_STATE_UNFORMED.Rusty Russell
You should never look at such a module, so it's excised from all paths which traverse the modules list. We add the state at the end, to avoid gratuitous ABI break (ksplice). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-13Merge tag 'for_linus-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull KGDB/KDB fixes and cleanups from Jason Wessel: "Cleanups - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c - Add module event hooks for simplified debugging with gdb Fixes - Fix kdb to stop paging with 'q' on bta and dmesg - Fix for data that scrolls off the vga console due to line wrapping when using the kdb pager New - The debug core registers for kernel module events which allows a kernel aware gdb to automatically load symbols and break on entry to a kernel module - Allow kgdboc=kdb to setup kdb on the vga console" * tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: tty/console: fix warnings in drivers/tty/serial/kgdboc.c kdb,vt_console: Fix missed data due to pager overruns kdb: Fix dmesg/bta scroll to quit with 'q' kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell kgdb,x86: fix warning about unused variable mips,kgdb: fix recursive page fault with CONFIG_KPROBES kgdb: Add module event hooks
2012-10-12kdb,vt_console: Fix missed data due to pager overrunsJason Wessel
It is possible to miss data when using the kdb pager. The kdb pager does not pay attention to the maximum column constraint of the screen or serial terminal. This result is not incrementing the shown lines correctly and the pager will print more lines that fit on the screen. Obviously that is less than useful when using a VGA console where you cannot scroll back. The pager will now look at the kdb_buffer string to see how many characters are printed. It might not be perfect considering you can output ASCII that might move the cursor position, but it is a substantially better approximation for viewing dmesg and trace logs. This also means that the vt screen needs to set the kdb COLUMNS variable. Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 16:20:28 +0000