summaryrefslogtreecommitdiff
path: root/kernel/irq
AgeCommit message (Collapse)Author
2016-07-12Merge remote-tracking branch 'origin/tmp-917a9a9133a6' into lskRunmin Wang
* tmp-917a9: ARM/vdso: Mark the vDSO code read-only after init x86/vdso: Mark the vDSO code read-only after init lkdtm: Verify that '__ro_after_init' works correctly arch: Introduce post-init read-only memory x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings asm-generic: Consolidate mark_rodata_ro() Linux 4.4.6 ld-version: Fix awk regex compile failure target: Drop incorrect ABORT_TASK put for completed commands block: don't optimize for non-cloned bio in bio_get_last_bvec() MIPS: smp.c: Fix uninitialised temp_foreign_map MIPS: Fix build error when SMP is used without GIC ovl: fix getcwd() failure after unsuccessful rmdir ovl: copy new uid/gid into overlayfs runtime inode userfaultfd: don't block on the last VM updates at exit time powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages powerpc/powernv: Add a kmsg_dumper that flushes console output on panic powerpc: Fix dedotify for binutils >= 2.26 Revert "drm/radeon/pm: adjust display configuration after powerstate" drm/radeon: Fix error handling in radeon_flip_work_func. drm/amdgpu: Fix error handling in amdgpu_flip_work_func. Revert "drm/radeon: call hpd_irq_event on resume" x86/mm: Fix slow_virt_to_phys() for X86_PAE again gpu: ipu-v3: Do not bail out on missing optional port nodes mac80211: Fix Public Action frame RX in AP mode mac80211: check PN correctly for GCMP-encrypted fragmented MPDUs mac80211: minstrel_ht: fix a logic error in RTS/CTS handling mac80211: minstrel_ht: set default tx aggregation timeout to 0 mac80211: fix use of uninitialised values in RX aggregation mac80211: minstrel: Change expected throughput unit back to Kbps iwlwifi: mvm: inc pending frames counter also when txing non-sta can: gs_usb: fixed disconnect bug by removing erroneous use of kfree() cfg80211/wext: fix message ordering wext: fix message delay/ordering ovl: fix working on distributed fs as lower layer ovl: ignore lower entries when checking purity of non-directory entries ASoC: wm8958: Fix enum ctl accesses in a wrong type ASoC: wm8994: Fix enum ctl accesses in a wrong type ASoC: samsung: Use IRQ safe spin lock calls ASoC: dapm: Fix ctl value accesses in a wrong type ncpfs: fix a braino in OOM handling in ncp_fill_cache() jffs2: reduce the breakage on recovery from halfway failed rename() dmaengine: at_xdmac: fix residue computation tracing: Fix check for cpu online when event is disabled s390/dasd: fix diag 0x250 inline assembly s390/mm: four page table levels vs. fork KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS KVM: VMX: disable PEBS before a guest entry kvm: cap halt polling at exactly halt_poll_ns PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr() ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property ARM: dts: dra7: do not gate cpsw clock due to errata i877 ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window arm64: account for sparsemem section alignment when choosing vmemmap offset Linux 4.4.5 drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable modules: fix longstanding /proc/kallsyms vs module insertion race. drm/i915: refine qemu south bridge detection drm/i915: more virtual south bridge detection block: get the 1st and last bvec via helpers block: check virt boundary in bio_will_gap() drm/amdgpu: Use drm_calloc_large for VM page_tables array thermal: cpu_cooling: fix out of bounds access in time_in_idle i2c: brcmstb: allocate correct amount of memory for regmap ubi: Fix out of bounds write in volume update code cxl: Fix PSL timebase synchronization detection MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp' MIPS: scache: Fix scache init with invalid line size. USB: serial: option: add support for Quectel UC20 USB: serial: option: add support for Telit LE922 PID 0x1045 USB: qcserial: add Sierra Wireless EM74xx device ID USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3) USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder usb: chipidea: otg: change workqueue ci_otg as freezable ALSA: timer: Fix broken compat timer user status ioctl ALSA: hdspm: Fix zero-division ALSA: hdsp: Fix wrong boolean ctl value accesses ALSA: hdspm: Fix wrong boolean ctl value accesses ALSA: seq: oss: Don't drain at closing a client ALSA: pcm: Fix ioctls for X32 ABI ALSA: timer: Fix ioctls for X32 ABI ALSA: rawmidi: Fix ioctls X32 ABI ALSA: hda - Fix mic issues on Acer Aspire E1-472 ALSA: ctl: Fix ioctls for X32 ABI ALSA: usb-audio: Add a quirk for Plantronics DA45 adv7604: fix tx 5v detect regression dmaengine: pxa_dma: fix cyclic transfers Fix directory hardlinks from deleted directories jffs2: Fix page lock / f->sem deadlock Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin" Btrfs: fix loading of orphan roots leading to BUG_ON pata-rb532-cf: get rid of the irq_to_gpio() call tracing: Do not have 'comm' filter override event 'comm' field ata: ahci: don't mark HotPlugCapable Ports as external/removable PM / sleep / x86: Fix crash on graph trace through x86 suspend arm64: vmemmap: use virtual projection of linear region Adding Intel Lewisburg device IDs for SATA writeback: flush inode cgroup wb switches instead of pinning super_block block: bio: introduce helpers to get the 1st and last bvec libata: Align ata_device's id on a cacheline libata: fix HDIO_GET_32BIT ioctl drm/amdgpu: return from atombios_dp_get_dpcd only when error drm/amdgpu/gfx8: specify which engine to wait before vm flush drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well drm/amdgpu/pm: update current crtc info after setting the powerstate drm/radeon/pm: update current crtc info after setting the powerstate drm/ast: Fix incorrect register check for DRAM width target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered iommu/amd: Apply workaround for ATS write permission check arm/arm64: KVM: Fix ioctl error handling KVM: x86: fix root cause for missed hardware breakpoints vfio: fix ioctl error handling Fix cifs_uniqueid_to_ino_t() function for s390x CIFS: Fix SMB2+ interim response processing for read requests cifs: fix out-of-bounds access in lease parsing fbcon: set a default value to blink interval kvm: x86: Update tsc multiplier on change. mips/kvm: fix ioctl error handling parisc: Fix ptrace syscall number and return value modification PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer block: Initialize max_dev_sectors to 0 drm/amdgpu: mask out WC from BO on unsupported arches btrfs: async-thread: Fix a use-after-free error for trace btrfs: Fix no_space in write and rm loop Btrfs: fix deadlock running delayed iputs at transaction commit time drivers: sh: Restore legacy clock domain on SuperH platforms use ->d_seq to get coherency between ->d_inode and ->d_flags Linux 4.4.4 iwlwifi: mvm: don't allow sched scans without matches to be started iwlwifi: update and fix 7265 series PCI IDs iwlwifi: pcie: properly configure the debug buffer size for 8000 iwlwifi: dvm: fix WoWLAN security: let security modules use PTRACE_MODE_* with bitmasks IB/cma: Fix RDMA port validation for iWarp x86/irq: Plug vector cleanup race x86/irq: Call irq_force_move_complete with irq descriptor x86/irq: Remove outgoing CPU from vector cleanup mask x86/irq: Remove the cpumask allocation from send_cleanup_vector() x86/irq: Clear move_in_progress before sending cleanup IPI x86/irq: Remove offline cpus from vector cleanup x86/irq: Get rid of code duplication x86/irq: Copy vectormask instead of an AND operation x86/irq: Check vector allocation early x86/irq: Reorganize the search in assign_irq_vector x86/irq: Reorganize the return path in assign_irq_vector x86/irq: Do not use apic_chip_data.old_domain as temporary buffer x86/irq: Validate that irq descriptor is still active x86/irq: Fix a race in x86_vector_free_irqs() x86/irq: Call chip->irq_set_affinity in proper context x86/entry/compat: Add missing CLAC to entry_INT80_32 x86/mpx: Fix off-by-one comparison with nr_registers hpfs: don't truncate the file when delete fails do_last(): ELOOP failure exit should be done after leaving RCU mode should_follow_link(): validate ->d_seq after having decided to follow xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. xen/pciback: Save the number of MSI-X entries to be copied later. xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY xen/scsiback: correct frontend counting xen/arm: correctly handle DMA mapping of compound pages ARM: at91/dt: fix typo in sama5d2 pinmux descriptions ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption do_last(): don't let a bogus return value from ->open() et.al. to confuse us kernel/resource.c: fix muxed resource handling in __request_region() sunrpc/cache: fix off-by-one in qword_get() tracing: Fix showing function event in available_events powerpc/eeh: Fix partial hotplug criterion KVM: x86: MMU: fix ubsan index-out-of-range warning KVM: x86: fix conversion of addresses to linear in 32-bit protected mode KVM: x86: fix missed hardware breakpoints KVM: arm/arm64: vgic: Ensure bitmaps are long enough KVM: async_pf: do not warn on page allocation failures of/irq: Fix msi-map calculation for nonzero rid-base NFSv4: Fix a dentry leak on alias use nfs: fix nfs_size_to_loff_t block: fix use-after-free in dio_bio_complete bio: return EINTR if copying to user space got interrupted i2c: i801: Adding Intel Lewisburg support for iTCO phy: core: fix wrong err handle for phy_power_on writeback: keep superblock pinned during cgroup writeback association switches cgroup: make sure a parent css isn't offlined before its children cpuset: make mm migration asynchronous PCI/AER: Flush workqueue on device remove to avoid use-after-free ARCv2: SMP: Emulate IPI to self using software triggered interrupt ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2 libata: fix sff host state machine locking while polling qla2xxx: Fix stale pointer access. spi: atmel: fix gpio chip-select in case of non-DT platform target: Fix race with SCF_SEND_DELAYED_TAS handling target: Fix remote-port TMR ABORT + se_cmd fabric stop target: Fix TAS handling for multi-session se_node_acls target: Fix LUN_RESET active TMR descriptor handling target: Fix LUN_RESET active I/O handling for ACK_KREF ALSA: hda - Fixing background noise on Dell Inspiron 3162 ALSA: hda - Apply clock gate workaround to Skylake, too Revert "workqueue: make sure delayed work run in local cpu" workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup mac80211: Requeue work after scan complete for all VIF types. rfkill: fix rfkill_fop_read wait_event usage tick/nohz: Set the correct expiry when switching to nohz/lowres mode perf stat: Do not clean event's private stats cdc-acm:exclude Samsung phone 04e8:685d Revert "Staging: panel: usleep_range is preferred over udelay" Staging: speakup: Fix getting port information sd: Optimal I/O size is in bytes, not sectors libceph: don't spam dmesg with stray reply warnings libceph: use the right footer size when skipping a message libceph: don't bail early from try_read() when skipping a message libceph: fix ceph_msg_revoke() seccomp: always propagate NO_NEW_PRIVS on tsync cpufreq: Fix NULL reference crash while accessing policy->governor_data cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype hwmon: (ads1015) Handle negative conversion values correctly hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (dell-smm) Blacklist Dell Studio XPS 8000 Thermal: do thermal zone update after a cooling device registered Thermal: handle thermal zone device properly during system sleep Thermal: initialize thermal zone device correctly IB/mlx5: Expose correct maximum number of CQE capacity IB/qib: Support creating qps with GFP_NOIO flag IB/qib: fix mcast detach when qp not attached IB/cm: Fix a recently introduced deadlock dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer dmaengine: at_xdmac: fix resume for cyclic transfers dmaengine: dw: fix cyclic transfer callbacks dmaengine: dw: fix cyclic transfer setup nfit: fix multi-interface dimm handling, acpi6.1 compatibility ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot() ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 lib: sw842: select crc32 uapi: update install list after nvme.h rename ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list toshiba_acpi: Fix blank screen at boot if transflective backlight is supported make sure that freeing shmem fast symlinks is RCU-delayed drm/radeon/pm: adjust display configuration after powerstate drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2) drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2) drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4 drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2) drm: No-Op redundant calls to drm_vblank_off() (v2) drm/radeon: use post-decrement in error handling drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command drm/i915: fix error path in intel_setup_gmbus() drm/i915/dsi: don't pass arbitrary data to sideband drm/i915/dsi: defend gpio table against out of bounds access drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select() drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+ drm/i915/dp: fall back to 18 bpp when sink capability is unknown drm/i915: Make sure DC writes are coherent on flush. drm/i915: Init power domains early in driver load drm/i915: intel_hpd_init(): Fix suspend/resume reprobing drm/i915: Restore inhibiting the load of the default context drm: fix missing reference counting decrease drm/radeon: hold reference to fences in radeon_sa_bo_new drm/radeon: mask out WC from BO on unsupported arches drm: add helper to check for wc memory support drm/radeon: fix DP audio support for APU with DCE4.1 display engine drm/radeon: Add a common function for DFS handling drm/radeon: cleaned up VCO output settings for DP audio drm/radeon: properly byte swap vce firmware setup drm/radeon: clean up fujitsu quirks drm/radeon: Fix "slow" audio over DP on DCE8+ drm/radeon: call hpd_irq_event on resume drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/dp/mst: fix in RAD element access drm/dp/mst: fix in MSTB RAD initialization drm/dp/mst: always send reply for UP request drm/dp/mst: process broadcast messages correctly drm/nouveau: platform: Fix deferred probe drm/nouveau/disp/dp: ensure sink is powered up before attempting link training drm/nouveau/display: Enable vblank irqs after display engine is on again. drm/nouveau/kms: take mode_config mutex in connector hotplug path drm/amdgpu/pm: adjust display configuration after powerstate drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc. drm/amdgpu: use post-decrement in error handling drm/amdgpu: fix issue with overlapping userptrs drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2) drm/amdgpu: remove unnecessary forward declaration drm/amdgpu: fix s4 resume drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu: no need to load MC firmware on fiji drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2 drm/amdgpu: fix tonga smu resume drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amdgpu: call hpd_irq_event on resume drm/amdgpu: Fix off-by-one errors in amdgpu_vm_bo_map drm/vmwgfx: respect 'nomodeset' drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates drm/vmwgfx: Fix an incorrect lock check virtio_pci: fix use after free on release virtio_balloon: fix race between migration and ballooning virtio_balloon: fix race by fill and leak regulator: mt6311: MT6311_REGULATOR needs to select REGMAP_I2C regulator: axp20x: Fix GPIO LDO enable value for AXP22x clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqs cxl: use correct operator when writing pcie config space values sparc64: fix incorrect sign extension in sys_sparc64_personality EDAC, mc_sysfs: Fix freeing bus' name EDAC: Robustify workqueues destruction MIPS: Fix buffer overflow in syscall_get_arguments() MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefs MIPS: hpet: Choose a safe value for the ETIME check MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler Revert "MIPS: Fix PAGE_MASK definition" cputime: Prevent 32bit overflow in time[val|spec]_to_cputime() time: Avoid signed overflow in timekeeping_get_ns() Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences Bluetooth: Fix incorrect removing of IRKs Bluetooth: Add support of Toshiba Broadcom based devices Bluetooth: Use continuous scanning when creating LE connections Drivers: hv: vmbus: Fix a Host signaling bug tools: hv: vss: fix the write()'s argument: error -> vss_msg mmc: sdhci: Allow override of get_cd() called from sdhci_request() mmc: sdhci: Allow override of mmc host operations mmc: sdhci-pci: Fix card detect race for Intel BXT/APL mmc: pxamci: fix again read-only gpio detection polarity mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL mmc: mmci: fix an ages old detection error mmc: core: Enable tuning according to the actual timing mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off() mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400 mmc: sdio: Fix invalid vdd in voltage switch power cycle mmc: sdhci: Fix DMA descriptor with zero data length mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT mmc: usdhi6rol0: handle NULL data in timeout clockevents/tcb_clksrc: Prevent disabling an already disabled clock posix-clock: Fix return code on the poll method's error path irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1 irqchip/atmel-aic: Fix wrong bit operation for IRQ priority irqchip/mxs: Add missing set_handle_irq() irqchip/omap-intc: Add support for spurious irq handling coresight: checking for NULL string in coresight_name_match() dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths dm snapshot: fix hung bios when copy error occurs dm space map metadata: remove unused variable in brb_pop() tda1004x: only update the frontend properties if locked vb2: fix a regression in poll() behavior for output,streams gspca: ov534/topro: prevent a division by 0 si2157: return -EINVAL if firmware blob is too big media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode rc: sunxi-cir: Initialize the spinlock properly namei: ->d_inode of a pinned dentry is stable only for positives mei: validate request value in client notify request ioctl mei: fix fasync return value on error rtlwifi: rtl8723be: Fix module parameter initialization rtlwifi: rtl8188ee: Fix module parameter initialization rtlwifi: rtl8192se: Fix module parameter initialization rtlwifi: rtl8723ae: Fix initialization of module parameters rtlwifi: rtl8192de: Fix incorrect module parameter descriptions rtlwifi: rtl8192ce: Fix handling of module parameters rtlwifi: rtl8192cu: Add missing parameter setup rtlwifi: rtl_pci: Fix kernel panic locks: fix unlock when fcntl_setlk races with a close um: link with -lpthread uml: fix hostfs mknod() uml: flush stdout before forking s390/fpu: signals vs. floating point control register s390/compat: correct restore of high gprs on signal return s390/dasd: fix performance drop s390/dasd: fix refcount for PAV reassignment s390/dasd: prevent incorrect length error under z/VM after PAV changes s390: fix normalization bug in exception table sorting btrfs: initialize the seq counter in struct btrfs_device Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots Btrfs: fix transaction handle leak on failure to create hard link Btrfs: fix number of transaction units required to create symlink Btrfs: send, don't BUG_ON() when an empty symlink is found btrfs: statfs: report zero available if metadata are exhausted Btrfs: igrab inode in writepage Btrfs: add missing brelse when superblock checksum fails KVM: s390: fix memory overwrites when vx is disabled s390/kvm: remove dependency on struct save_area definition clocksource/drivers/vt8500: Increase the minimum delta genirq: Validate action before dereferencing it in handle_irq_event_percpu() mm: numa: quickly fail allocations for NUMA balancing on full nodes mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED ocfs2: unlock inode if deleting inode from orphan fails drm/i915: shut up gen8+ SDE irq dmesg noise iw_cxgb3: Fix incorrectly returning error on success spi: omap2-mcspi: Prevent duplicate gpio_request drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE USB: option: add "4G LTE usb-modem U901" USB: option: add support for SIM7100E USB: cp210x: add IDs for GE B650V3 and B850V3 boards usb: dwc3: Fix assignment of EP transfer resources can: ems_usb: Fix possible tx overflow dm thin: fix race condition when destroying thin pool workqueue bcache: Change refill_dirty() to always scan entire disk if necessary bcache: prevent crash on changing writeback_running bcache: allows use of register in udev to avoid "device_busy" error. bcache: unregister reboot notifier if bcache fails to unregister device bcache: fix a leak in bch_cached_dev_run() bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device bcache: Add a cond_resched() call to gc bcache: fix a livelock when we cause a huge number of cache misses lib/ucs2_string: Correct ucs2 -> utf8 conversion efi: Add pstore variables to the deletion whitelist efi: Make efivarfs entries immutable by default efi: Make our variable validation list include the guid efi: Do variable name validation tests in utf8 efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version lib/ucs2_string: Add ucs2 -> utf8 helper functions ARM: 8457/1: psci-smp is built only for SMP drm/gma500: Use correct unref in the gem bo create function devm_memremap: Fix error value when memremap failed KVM: s390: fix guest fprs memory leak arm64: errata: Add -mpc-relative-literal-loads to build flags ARM: debug-ll: fix BCM63xx entry for multiplatform ext4: fix bh->b_state corruption sctp: Fix port hash table size computation unix_diag: fix incorrect sign extension in unix_lookup_by_ino tipc: unlock in error path rtnl: RTM_GETNETCONF: fix wrong return value IFF_NO_QUEUE: Fix for drivers not calling ether_setup() tcp/dccp: fix another race at listener dismantle route: check and remove route cache when we get route net_sched fix: reclassification needs to consider ether protocol changes pppoe: fix reference counting in PPPoE proxy l2tp: Fix error creating L2TP tunnels net/mlx4_en: Avoid changing dev->features directly in run-time net/mlx4_en: Choose time-stamping shift value according to HW frequency net/mlx4_en: Count HW buffer overrun only once qmi_wwan: add "4G LTE usb-modem U901" tcp: md5: release request socket instead of listener tipc: fix premature addition of node to lookup table af_unix: Guard against other == sk in unix_dgram_sendmsg af_unix: Don't set err in unix_stream_read_generic unless there was an error ipv4: fix memory leaks in ip_cmsg_send() callers bonding: Fix ARP monitor validation bpf: fix branch offset adjustment on backjumps after patching ctx expansion flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen net: Copy inner L3 and L4 headers as unaligned on GRE TEB sctp: translate network order to host order when users get a hmacid enic: increment devcmd2 result ring in case of timeout tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs net:Add sysctl_max_skb_frags tcp: do not drop syn_recv on all icmp reports unix: correctly track in-flight fds in sending process user_struct ipv6: fix a lockdep splat ipv6: addrconf: Fix recursive spin lock call ipv6/udp: use sticky pktinfo egress ifindex on connect() ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() tcp: beware of alignments in tcp_get_info() switchdev: Require RTNL mutex to be held when sending FDB notifications inet: frag: Always orphan skbs inside ip_defrag() tipc: fix connection abort during subscription cancel net: dsa: fix mv88e6xxx switches sctp: allow setting SCTP_SACK_IMMEDIATELY by the application pptp: fix illegal memory access caused by multiple bind()s af_unix: fix struct pid memory leak tcp: fix NULL deref in tcp_v4_send_ack() lwt: fix rx checksum setting for lwt devices tunneling over ipv6 tunnels: Allow IPv6 UDP checksums to be correctly controlled. net: dp83640: Fix tx timestamp overflow handling. gro: Make GRO aware of lightweight tunnels. af_iucv: Validate socket address length in iucv_sock_bind() Conflicts: arch/arm64/Makefile arch/arm64/include/asm/cacheflush.h drivers/mmc/host/sdhci.c drivers/usb/dwc3/ep0.c drivers/usb/dwc3/gadget.c kernel/module.c sound/core/pcm_compat.c CRs-Fixed: 1010239 Signed-off-by: Runmin Wang <runminw@codeaurora.org> Change-Id: I41a28636fc9ad91f9d979b191784609476294cdf
2016-03-25genirq: call cancel_work_sync from irq_set_affinity_notifierPrasad Sodagudi
When ever notification of IRQ affinity changes, call cancel_work_sync from irq_set_affinity_notifier to cancel all pending works to avoid work list corruption. Change-Id: I1f093bcc43be8c6696bad29250e4926cbc6c4029 Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
2016-03-03genirq: Validate action before dereferencing it in handle_irq_event_percpu()Thomas Gleixner
commit 570540d50710ed192e98e2f7f74578c9486b6b05 upstream. commit 71f64340fc0e changed the handling of irq_desc->action from CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() if (desc->action) { handle_irq_event() action = desc->action unlock(desc) desc->action = NULL handle_irq_event_percpu(desc, action) action->xxx to CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() if (desc->action) { handle_irq_event() unlock(desc) desc->action = NULL handle_irq_event_percpu(desc, action) action = desc->action action->xxx So if free_irq manages to set the action to NULL between the unlock and before the readout, we happily dereference a null pointer. We could simply revert 71f64340fc0e, but we want to preserve the better code generation. A simple solution is to change the action loop from a do {} while to a while {} loop. This is safe because we either see a valid desc->action or NULL. If the action is about to be removed it is still valid as free_irq() is blocked on synchronize_irq(). CPU 0 CPU 1 free_irq() lock(desc) lock(desc) handle_edge_irq() handle_irq_event(desc) set(INPROGRESS) unlock(desc) handle_irq_event_percpu(desc) action = desc->action desc->action = NULL while (action) { action->xxx ... action = action->next; sychronize_irq() while(INPROGRESS); lock(desc) clr(INPROGRESS) free(action) That's basically the same mechanism as we have for shared interrupts. action->next can become NULL while handle_irq_event_percpu() runs. Either it sees the action or NULL. It does not matter, because action itself cannot go away before the interrupt in progress flag has been cleared. Fixes: commit 71f64340fc0e "genirq: Remove the second parameter from handle_irq_event_percpu()" Reported-by: zyjzyj2000@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Huang Shijie <shijie.huang@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1601131224190.3575@nanos Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-14genirq: Prevent chip buslock deadlockThomas Gleixner
If a interrupt chip utilizes chip->buslock then free_irq() can deadlock in the following way: CPU0 CPU1 interrupt(X) (Shared or spurious) free_irq(X) interrupt_thread(X) chip_bus_lock(X) irq_finalize_oneshot(X) chip_bus_lock(X) synchronize_irq(X) synchronize_irq() waits for the interrupt thread to complete, i.e. forever. Solution is simple: Drop chip_bus_lock() before calling synchronize_irq() as we do with the irq_desc lock. There is nothing to be protected after the point where irq_desc lock has been released. This adds chip_bus_lock/unlock() to the remove_irq() code path, but that's actually correct in the case where remove_irq() is called on such an interrupt. The current users of remove_irq() are not affected as none of those interrupts is on a chip which requires buslock. Reported-by: Fredrik Markström <fredrik.markstrom@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2015-11-15Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq and timer fixes from Thomas Gleixner: - An irq regression fix to restore the wakeup behaviour of chained interrupts. - A timer fix for a long standing race versus timers scheduled on a target cpu which got exposed by recent changes in the workqueue implementation. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/PM: Restore system wake up from chained interrupts * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Use proper base migration in add_timer_on()
2015-11-10genirq/PM: Restore system wake up from chained interruptsGrygorii Strashko
Commit e509bd7da149 ("genirq: Allow migration of chained interrupts by installing default action") breaks PCS wake up IRQ behaviour on TI OMAP based platforms (dra7-evm). TI OMAP IRQ wake up configuration: GIC-irqchip->PCM_IRQ |- omap_prcm_register_chain_handler |- PRCM-irqchip -> PRCM_IO_IRQ |- pcs_irq_chain_handler |- pinctrl-irqchip -> PCS_uart1_wakeup_irq This happens because IRQ PM code (irq/pm.c) is expected to ignore chained interrupts by default: static bool suspend_device_irq(struct irq_desc *desc) { if (!desc->action || desc->no_suspend_depth) return false; - it's expected !desc->action = true for chained interrupts; but, after above change, all chained interrupt descriptors will have default action handler installed - chained_action. As result, chained interrupts will be silently disabled during system suspend. Hence, fix it by introducing helper function irq_desc_is_chained() and use it in suspend_device_irq() for chained interrupts identification and skip them, once detected. Fixes: e509bd7da149 ("genirq: Allow migration of chained interrupts..") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <nsekhar@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1447149492-20699-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-04Merge tag 'pm+acpi-4.4-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "Quite a new features are included this time. First off, the Collaborative Processor Performance Control interface (version 2) defined by ACPI will now be supported on ARM64 along with a cpufreq frontend for CPU performance scaling. Second, ACPI gets a new infrastructure for the early probing of IRQ chips and clock sources (along the lines of the existing similar mechanism for DT). Next, the ACPI core and the generic device properties API will now support a recently introduced hierarchical properties extension of the _DSD (Device Specific Data) ACPI device configuration object. If the ACPI platform firmware uses that extension to organize device properties in a hierarchical way, the kernel will automatically handle it and make those properties available to device drivers via the generic device properties API. It also will be possible to build the ACPICA's AML interpreter debugger into the kernel now and use that to diagnose AML-related problems more efficiently. In the future, this should make it possible to single-step AML execution and do similar things. Interesting stuff, although somewhat experimental at this point. Finally, the PM core gets a new mechanism that can be used by device drivers to distinguish between suspend-to-RAM (based on platform firmware support) and suspend-to-idle (or other variants of system suspend the platform firmware is not involved in) and possibly optimize their device suspend/resume handling accordingly. In addition to that, some existing features are re-organized quite substantially. First, the ACPI-based handling of PCI host bridges on x86 and ia64 is unified and the common code goes into the ACPI core (so as to reduce code duplication and eliminate non-essential differences between the two architectures in that area). Second, the Operating Performance Points (OPP) framework is reorganized to make the code easier to find and follow. Next, the cpufreq core's sysfs interface is reorganized to get rid of the "primary CPU" concept for configurations in which the same performance scaling settings are shared between multiple CPUs. Finally, some interfaces that aren't necessary any more are dropped from the generic power domains framework. On top of the above we have some minor extensions, cleanups and bug fixes in multiple places, as usual. Specifics: - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng). The most significant change is to allow the AML debugger to be built into the kernel. On top of that there is an update related to the NFIT table (the ACPI persistent memory interface) and a few fixes and cleanups. - ACPI CPPC2 (Collaborative Processor Performance Control v2) support along with a cpufreq frontend (Ashwin Chaugule). This can only be enabled on ARM64 at this point. - New ACPI infrastructure for the early probing of IRQ chips and clock sources (Marc Zyngier). - Support for a new hierarchical properties extension of the ACPI _DSD (Device Specific Data) device configuration object allowing the kernel to handle hierarchical properties (provided by the platform firmware this way) automatically and make them available to device drivers via the generic device properties interface (Rafael Wysocki). - Generic device properties API extension to obtain an index of certain string value in an array of strings, along the lines of of_property_match_string(), but working for all of the supported firmware node types, and support for the "dma-names" device property based on it (Mika Westerberg). - ACPI core fix to parse the MADT (Multiple APIC Description Table) entries in the order expected by platform firmware (and mandated by the specification) to avoid confusion on systems with more than 255 logical CPUs (Lukasz Anaczkowski). - Consolidation of the ACPI-based handling of PCI host bridges on x86 and ia64 (Jiang Liu). - ACPI core fixes to ensure that the correct IRQ number is used to represent the SCI (System Control Interrupt) in the cases when it has been re-mapped (Chen Yu). - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede). - ACPI EC driver fixes (Lv Zheng). - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri Kosina, Rami Rosen, Rasmus Villemoes). - New mechanism in the PM core allowing drivers to check if the platform firmware is going to be involved in the upcoming system suspend or if it has been involved in the suspend the system is resuming from at the moment (Rafael Wysocki). This should allow drivers to optimize their suspend/resume handling in some cases and the changes include a couple of users of it (the i8042 input driver, PCI PM). - PCI PM fix to prevent runtime-suspended devices with PME enabled from being resumed during system suspend even if they aren't configured to wake up the system from sleep (Rafael Wysocki). - New mechanism to report the number of a wakeup IRQ that woke up the system from sleep last time (Alexandra Yates). - Removal of unused interfaces from the generic power domains framework and fixes related to latency measurements in that code (Ulf Hansson, Daniel Lezcano). - cpufreq core sysfs interface rework to make it handle CPUs that share performance scaling settings (represented by a common cpufreq policy object) more symmetrically (Viresh Kumar). This should help to simplify the CPU offline/online handling among other things. - cpufreq core fixes and cleanups (Viresh Kumar). - intel_pstate fixes related to the Turbo Activation Ratio (TAR) mechanism on client platforms which causes the turbo P-states range to vary depending on platform firmware settings (Srinivas Pandruvada). - intel_pstate sysfs interface fix (Prarit Bhargava). - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G Bhat, Luis de Bethencourt). - cpuidle mvebu driver cleanups (Russell King). - OPP (Operating Performance Points) framework code reorganization to make it more maintainable (Viresh Kumar). - Intel Broxton support for the RAPL (Running Average Power Limits) power capping driver (Amy Wiles). - Assorted power management code fixes and cleanups (Dan Carpenter, Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus Villemoes)" * tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits) cpufreq: postfix policy directory with the first CPU in related_cpus cpufreq: create cpu/cpufreq/policyX directories cpufreq: remove cpufreq_sysfs_{create|remove}_file() cpufreq: create cpu/cpufreq at boot time cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate() PM / Domains: Merge measurements for PM QoS device latencies PM / Domains: Don't measure ->start|stop() latency in system PM callbacks PM / clk: Fix broken build due to non-matching code and header #ifdefs ACPI / Documentation: add copy_dsdt to ACPI format options ACPI / sysfs: correctly check failing memory allocation ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405 ACPI / CPPC: Fix potential memory leak ACPI / CPPC: signedness bug in register_pcc_channel() ACPI / PAD: power_saving_thread() is not freezable ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle ACPI: Using correct irq when waiting for events ACPI: Use correct IRQ when uninstalling ACPI interrupt handler cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver cpuidle: mvebu: clean up multiple platform drivers ...
2015-11-04Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - "genirq: Introduce generic irq migration for cpu hotunplugged" patch merged from tip/irq/for-arm to allow the arm64-specific part to be upstreamed via the arm64 tree - CPU feature detection reworked to cope with heterogeneous systems where CPUs may not have exactly the same features. The features reported by the kernel via internal data structures or ELF_HWCAP are delayed until all the CPUs are up (and before user space starts) - Support for 16KB pages, with the additional bonus of a 36-bit VA space, though the latter only depending on EXPERT - Implement native {relaxed, acquire, release} atomics for arm64 - New ASID allocation algorithm which avoids IPI on roll-over, together with TLB invalidation optimisations (using local vs global where feasible) - KASan support for arm64 - EFI_STUB clean-up and isolation for the kernel proper (required by KASan) - copy_{to,from,in}_user optimisations (sharing the memcpy template) - perf: moving arm64 to the arm32/64 shared PMU framework - L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware - Support for the contiguous PTE hint on kernel mapping (16 consecutive entries may be able to use a single TLB entry) - Generic CONFIG_HZ now used on arm64 - defconfig updates * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits) arm64/efi: fix libstub build under CONFIG_MODVERSIONS ARM64: Enable multi-core scheduler support by default arm64/efi: move arm64 specific stub C code to libstub arm64: page-align sections for DEBUG_RODATA arm64: Fix build with CONFIG_ZONE_DMA=n arm64: Fix compat register mappings arm64: Increase the max granular size arm64: remove bogus TASK_SIZE_64 check arm64: make Timer Interrupt Frequency selectable arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED arm64: cachetype: fix definitions of ICACHEF_* flags arm64: cpufeature: declare enable_cpu_capabilities as static genirq: Make the cpuhotplug migration code less noisy arm64: Constify hwcap name string arrays arm64/kvm: Make use of the system wide safe values arm64/debug: Make use of the system wide safe value arm64: Move FP/ASIMD hwcap handling to common code arm64/HWCAP: Use system wide safe values arm64/capabilities: Make use of system wide safe value arm64: Delay cpu feature capability checks ...
2015-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...
2015-11-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement delivers: - Rework the irqdomain core infrastructure to accomodate ACPI based systems. This is required to support ARM64 without creating artificial device tree nodes. - Sanitize the ACPI based ARM GIC initialization by making use of the new firmware independent irqdomain core - Further improvements to the generic MSI management - Generalize the irq migration on CPU hotplug - Improvements to the threaded interrupt infrastructure - Allow the migration of "chained" low level interrupt handlers - Allow optional force masking of interrupts in disable_irq[_nosysnc] - Support for two new interrupt chips - Sigh! - A larger set of errata fixes for ARM gicv3 - The usual pile of fixes, updates, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) Document that IRQ_NONE should be returned when IRQ not actually handled PCI/MSI: Allow the MSI domain to be device-specific PCI: Add per-device MSI domain hook of/irq: Use the msi-map property to provide device-specific MSI domain of/irq: Split of_msi_map_rid to reuse msi-map lookup irqchip/gic-v3-its: Parse new version of msi-parent property PCI/MSI: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Use of_msi_get_domain instead of open-coded "msi-parent" parsing of/irq: Add support code for multi-parent version of "msi-parent" irqchip/gic-v3-its: Add handling of PCI requester id. PCI/MSI: Add helper function pci_msi_domain_get_msi_rid(). of/irq: Add new function of_msi_map_rid() Docs: dt: Add PCI MSI map bindings irqchip/gic-v2m: Add support for multiple MSI frames irqchip/gic-v3: Fix translation of LPIs after conversion to irq_fwspec irqchip/mxs: Add Alphascale ASM9260 support irqchip/mxs: Prepare driver for hardware with different offsets irqchip/mxs: Panic if ioremap or domain creation fails irqdomain: Documentation updates irqdomain/msi: Use fwnode instead of of_node ...
2015-11-02Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / hibernate: fix a comment typo input: i8042: Avoid resetting controller on system suspend/resume PM / PCI / ACPI: Kick devices that might have been reset by firmware PM / sleep: Add flags to indicate platform firmware involvement PM / sleep: Drop pm_request_idle() from pm_generic_complete() PCI / PM: Avoid resuming more devices during system suspend PM / wakeup: wakeup_source_create: use kstrdup_const PM / sleep: Report interrupt that caused system wakeup
2015-10-22Merge branch 'irq/for-arm' of ↵Catalin Marinas
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip This is an incremental fix for a patch previously pulled from tip irq/for-arm. * 'irq/for-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Make the cpuhotplug migration code less noisy
2015-10-22genirq: Make the cpuhotplug migration code less noisyThomas Gleixner
The original arm code has a pr_debug() statement for the case where the irq chip has no set_affinity() callback. That's sufficient for debugging and we really don't want to spam dmesg with useless warnings for the normal case. Fixes: f1e0bb0ad473: "genirq: Introduce generic irq migration for cpu hotunplug" Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Requested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16genirq/msi: Do not use pci_msi_[un]mask_irq as default methodsMarc Zyngier
When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS is set, and that any of .mask or .unmask are NULL in the irq_chip structure, we set them to pci_msi_[un]mask_irq. This is a bad idea for at least two reasons: - PCI_MSI might not be selected, kernel fails to build (yes, this is legitimate, at least on arm64!) - This may not be a PCI/MSI domain at all (platform MSI, for example) Either way, this looks wrong. Move the overriding of mask/unmask to the PCI counterpart, and panic is any of these two methods is not set in the core code (they really should be present). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain/msi: Use fwnode instead of of_nodeMarc Zyngier
As we continue to push of_node towards the outskirts of irq domains, let's start tackling the case of msi_create_irq_domain and its little friends. This has limited impact in both PCI/MSI, platform MSI, and a few drivers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_domain_create_hierarchyMarc Zyngier
As we're about to start converting the various MSI layers to use fwnode_handle instead of device_node, add irq_domain_create_hierarchy as a directly equivalent of irq_domain_add_hierarchy (which still exists as a compatibility interface). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-16-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Add a fwnode_handle allocatorMarc Zyngier
In order to be able to reference an irqdomain from ACPI, we need to be able to create an identifier, which is usually a struct device_node. This device node does't really fit the ACPI infrastructure, so we cunningly allocate a new structure containing a fwnode_handle, and return that. This structure doesn't really point to a device (interrupt controllers are not "real" devices in Linux), but as we cannot really deny that they exist, we create them with a new fwnode_type (FWNODE_IRQCHIP). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-9-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_domain_create_{linear, tree}Marc Zyngier
Just like we have irq_domain_add_{linear,tree} to create a irq domain identified by an of_node, introduce irq_domain_create_{linear,tree} that do the same thing, except that they take a struct fwnode_handle. Existing functions get rewritten in terms of the new ones so that everything keeps working as before (and __irq_domain_add is now fwnode_handle based as well). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce irq_create_fwspec_mappingMarc Zyngier
Just like we have irq_create_of_mapping, irq_create_fwspec_mapping creates a IRQ domain mapping for an interrupt described in a struct irq_fwspec. irq_create_of_mapping gets rewritten in terms of the new function, and the hack we introduced before gets removed (now that no stacked irqchip uses of_phandle_args anymore). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-7-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Introduce a firmware-specific IRQ specifier structureMarc Zyngier
So far the closest thing to a generic IRQ specifier structure is of_phandle_args, which happens to be pretty OF specific (the of_node pointer in there is quite annoying). Let's introduce 'struct irq_fwspec' that can be used in place of of_phandle_args for OF, but also for other firmware implementations (that'd be ACPI). This is used together with a new 'translate' method that is the pendent of 'xlate'. We convert irq_create_of_mapping to use this new structure (with a small hack that will be removed later). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Allow irq domain lookup by fwnodeMarc Zyngier
So far, our irq domains are still looked up by device node. Let's change this and allow a domain to be looked up using a fwnode_handle pointer. The existing interfaces are preserved with a couple of helpers. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Convert irqdomain-%3Eof_node to fwnodeMarc Zyngier
Now that we have everyone accessing the of_node field via the irq_domain_get_of_node accessor, it is pretty easy to swap it for a pointer to a fwnode_handle. This translates into a few limited changes in __irq_domain_add, and an updated irq_domain_get_of_node. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Use irq_domain_get_of_node() instead of direct field accessMarc Zyngier
The struct irq_domain contains a "struct device_node *" field (of_node) that is almost the only link between the irqdomain and the device tree infrastructure. In order to prepare for the removal of that field, convert all users to use irq_domain_get_of_node() instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13Merge branch 'linus' into irq/coreThomas Gleixner
Bring in upstream updates for patches which depend on them
2015-10-12Merge back earlier 'pm-sleep' material for v4.4.Rafael J. Wysocki
2015-10-11genirq: Add flag to force mask in disable_irq[_nosync]()Thomas Gleixner
If an irq chip does not implement the irq_disable callback, then we use a lazy approach for disabling the interrupt. That means that the interrupt is marked disabled, but the interrupt line is not immediately masked in the interrupt chip. It only becomes masked if the interrupt is raised while it's marked disabled. We use this to avoid possibly expensive mask/unmask operations for common case operations. Unfortunately there are devices which do not allow the interrupt to be disabled easily at the device level. They are forced to use disable_irq_nosync(). This can result in taking each interrupt twice. Instead of enforcing the non lazy mode on all interrupts of a irq chip, provide a settings flag, which can be set by the driver for that particular interrupt line. Reported-and-tested-by: Duc Dang <dhdang@apm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos
2015-10-09genirq: Make irq_set_vcpu_affinity available for CONFIG_SMP=nFeng Wu
irq_set_vcpu_affinity() is needed when CONFIG_SMP=n, so move the definition out of "#ifdef CONFIG_SMP" Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Feng Wu <feng.wu@intel.com> Cc: jiang.liu@linux.intel.com Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1443860438-144926-1-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09genirq: Allow migration of chained interrupts by installing default actionMika Westerberg
When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09Merge branch 'irq/for-arm' of ↵Catalin Marinas
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'irq/for-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Introduce generic irq migration for cpu hotunplug
2015-10-09genirq: Fix handle_bad_irq kerneldoc commentArnd Bergmann
A recent cleanup removed the 'irq' parameter from many functions, but left the documentation for this in place for at least one function. This removes it. Fixes: bd0b9ac405e1 ("genirq: Remove irq argument from irq flow handlers") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: kbuild-all@01.org Cc: Austin Schuh <austin@peloton-tech.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/5400000.cD19rmgWjV@wuerfel Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09genirq: Export handle_bad_irqArnd Bergmann
A cleanup of the omap gpio driver introduced a use of the handle_bad_irq() function in a device driver that can be a loadable module. This broke the ARM allmodconfig build: ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined! This patch exports the handle_bad_irq symbol in order to allow the use in modules. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Austin Schuh <austin@peloton-tech.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/5847725.4IBopItaOr@wuerfel Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-01Merge branch 'irq/for-arm' into irq/coreThomas Gleixner
Bring in the change which we offered arm[64] folks to pull into their trees.
2015-10-01genirq: Introduce generic irq migration for cpu hotunplugYang Yingliang
ARM and ARM64 have almost identical code for migrating interrupts on cpu hotunplug. Provide a generic version which can be used by both. The new code addresses a shortcoming in the ARM[64] variants which fails to update the affinity change in some cases. The solution for this is to use the core function irq_do_set_affinity() instead of open coding it. [ tglx: Added copyright notice and license boilerplate. Rewrote subject and changelog. ] Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: http://lkml.kernel.org/r/1443087135-17044-2-git-send-email-yangyingliang@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-01genirq: Fix race in register_irq_proc()Ben Hutchings
Per-IRQ directories in procfs are created only when a handler is first added to the irqdesc, not when the irqdesc is created. In the case of a shared IRQ, multiple tasks can race to create a directory. This race condition seems to have been present forever, but is easier to hit with async probing. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Link: http://lkml.kernel.org/r/1443266636.2004.2.camel@decadent.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
2015-09-29irq: Export per-cpu irq allocation and de-allocation functionsMaxime Ripard
Some drivers might use the per-cpu interrupts and still might be built as a module. Export request_percpu_irq an free_percpu_irq to these user, which also make it consistent with enable/disable_percpu_irq that were exported. Reported-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29genirq: Fix the documentation of request_percpu_irqMaxime Ripard
The documentation of request_percpu_irq is confusing and suggest that the interrupt is not enabled at all, while it is actually enabled on the local CPU. Clarify that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22genirq: Remove the second parameter from handle_irq_event_percpu()Huang Shijie
Actually, we always use the first irq action of the @desc->action chain, so remove the second parameter from handle_irq_event_percpu() which makes the code more tidy. Signed-off-by: Huang Shijie <shijie.huang@arm.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: peterz@infradead.org Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1441160695-19809-1-git-send-email-shijie.huang@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22genirq: Handle force threading of irqs with primary and thread handlerThomas Gleixner
Force threading of interrupts does not really deal with interrupts which are requested with a primary and a threaded handler. The current policy is to leave them alone and let the primary handler run in interrupt context, but we set the ONESHOT flag for those interrupts as well. Kohji Okuno debugged a problem with the SDHCI driver where the interrupt thread waits for a hardware interrupt to trigger, which can't work well because the hardware interrupt is masked due to the ONESHOT flag being set. He proposed to set the ONESHOT flag only if the interrupt does not provide a thread handler. Though that does not work either because these interrupts can be shared. So the other interrupt would rightfully get the ONESHOT flag set and therefor the same situation would happen again. To deal with this proper, we need to force thread the primary handler of such interrupts as well. That means that the primary interrupt handler is treated as any other primary interrupt handler which is not marked IRQF_NO_THREAD. The threaded handler becomes a separate thread so the SDHCI flow logic can be handled gracefully. The same issue was reported against 4.1-rt. Reported-and-tested-by: Kohji Okuno <okuno.kohji@jp.panasonic.com> Reported-By: Michal Smucr <msmucr@gmail.com> Reported-and-tested-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16genirq: Move field 'msi_desc' from irq_data into irq_common_dataJiang Liu
MSI descriptors are per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-35-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Move field 'affinity' from irq_data into irq_common_dataJiang Liu
Irq affinity mask is per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Move field 'handler_data' from irq_data into irq_common_dataJiang Liu
Handler data (handler_data) is per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16genirq: Move field 'node' from irq_data into irq_common_dataJiang Liu
NUMA node information is per-irq instead of per-irqchip, so move it into struct irq_common_data. Also use CONFIG_NUMA to guard irq_common_data.node. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433145945-789-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-16PM / sleep: Report interrupt that caused system wakeupAlexandra Yates
Add a sysfs attribute, /sys/power/pm_wakeup_irq, reporting the IRQ number of the first wakeup interrupt (that is, the first interrupt from an IRQ line armed for system wakeup) seen by the kernel during the most recent system suspend/resume cycle. This feature will be useful for system wakeup diagnostics of spurious wakeup interrupts. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> [ rjw: Fixed up pm_wakeup_irq definition ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-20genirq: Introduce irq_chip_set_type_parent() helperGrygorii Strashko
This helper is required for irq chips which do not implement a irq_set_type callback and need to call down the irq domain hierarchy for the actual trigger type change. This helper is required to fix further wreckage caused by the conversion of TI OMAP to hierarchical irq domains and therefor tagged for stable. [ tglx: Massaged changelog ] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: <marc.zyngier@arm.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchyGrygorii Strashko
irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to find at least one .irq_retrigger() callback implemented in the IRQ domain hierarchy. That's wrong, because check_irq_resend() expects a 0 return value from the callback in case that the hardware assisted resend was not possible. If the return value is non zero the core code assumes hardware resend success and the software resend is not invoked. This results in lost interrupts on platforms where none of the parent irq chips in the hierarchy implements the retrigger callback. This is observable on TI OMAP, where the hierarchy is: ARM GIC <- OMAP wakeupgen <- TI Crossbar Return 0 instead so the software resend mechanism gets invoked. [ tglx: Massaged changelog ] Fixes: 85f08c17de26 ('genirq: Introduce helper functions...') Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: <linux@arm.linux.org.uk> Cc: <nsekhar@ti.com> Cc: <jason@lakedaemon.net> Cc: <balbi@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <tony@atomide.com> Cc: stable@vger.kernel.org # 4.1 Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30genirq/irqdomain: Allow irq domain aliasingMarc Zyngier
It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30genirq: Use the proper parameter name in kernel docMasanari Iida
The following warning is emitted for make xmldocs: Warning(.//kernel/irq/chip.c:1009): No description found for parameter 'vcpu_info' Warning(.//kernel/irq/chip.c:1009): Excess function parameter 'dest' description in 'irq_chip_set_vcpu_affinity_parent' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Link: http://lkml.kernel.org/r/1438164576-5945-1-git-send-email-standby24x7@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>