Age | Commit message (Collapse) | Author |
|
Changes in 4.4.78
net_sched: fix error recovery at qdisc creation
net: sched: Fix one possible panic when no destroy callback
net/phy: micrel: configure intterupts after autoneg workaround
ipv6: avoid unregistering inet6_dev for loopback
net: dp83640: Avoid NULL pointer dereference.
tcp: reset sk_rx_dst in tcp_disconnect()
net: prevent sign extension in dev_get_stats()
bpf: prevent leaking pointer via xadd on unpriviledged
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
ipv6: dad: don't remove dynamic addresses if link is down
net: ipv6: Compare lwstate in detecting duplicate nexthops
vrf: fix bug_on triggered by rx when destroying a vrf
rds: tcp: use sock_create_lite() to create the accept socket
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
cfg80211: Check if PMKID attribute is of expected size
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
parisc: use compat_sys_keyctl()
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
parisc/mm: Ensure IRQs are off in switch_mm()
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
kernel/extable.c: mark core_kernel_text notrace
mm/list_lru.c: fix list_lru_count_node() to be race free
fs/dcache.c: fix spin lockup issue on nlru->lock
checkpatch: silence perl 5.26.0 unescaped left brace warnings
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
arm: move ELF_ET_DYN_BASE to 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
s390: reduce ELF_ET_DYN_BASE
exec: Limit arg stack to at most 75% of _STK_LIM
vt: fix unchecked __put_user() in tioclinux ioctls
mnt: In umount propagation reparent in a separate pass
mnt: In propgate_umount handle visiting mounts in any order
mnt: Make propagate_umount less slow for overlapping mount propagation trees
selftests/capabilities: Fix the test_execve test
tpm: Get rid of chip->pdev
tpm: Provide strong locking for device removal
Add "shutdown" to "struct class".
tpm: Issue a TPM2_Shutdown for TPM2 devices.
mm: fix overflow check in expand_upwards()
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
crypto: atmel - only treat EBUSY as transient if backlog
crypto: sha1-ssse3 - Disable avx2
crypto: caam - fix signals handling
sched/topology: Fix overlapping sched_group_mask
sched/topology: Optimize build_group_mask()
PM / wakeirq: Convert to SRCU
PM / QoS: return -EINVAL for bogus strings
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
KVM: x86: disable MPX if host did not enable MPX XSAVE features
kvm: vmx: Do not disable intercepts for BNDCFGS
kvm: x86: Guest BNDCFGS requires guest MPX support
kvm: vmx: Check value written to IA32_BNDCFGS
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
Linux 4.4.78
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit c59f29cb144a6a0dfac16ede9dc8eafc02dc56ca upstream.
The 's' flag is supposed to indicate that a softirq is running. This
can be detected by testing the preempt_count with SOFTIRQ_OFFSET.
The current code tests the preempt_count with SOFTIRQ_MASK, which
would be true even when softirqs are disabled but not serving a
softirq.
Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.org
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.77
fs: add a VALID_OPEN_FLAGS
fs: completely ignore unknown open flags
driver core: platform: fix race condition with driver_override
bgmac: reset & enable Ethernet core before using it
mm: fix classzone_idx underflow in shrink_zones()
tracing/kprobes: Allow to create probe with a module name starting with a digit
drm/virtio: don't leak bo on drm_gem_object_init failure
usb: dwc3: replace %p with %pK
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Add USB quirk for HVR-950q to avoid intermittent device resets
usb: usbip: set buffer pointers to NULL after free
usb: Fix typo in the definition of Endpoint[out]Request
mac80211_hwsim: Replace bogus hrtimer clockid
sysctl: don't print negative flag for proc_douintvec
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
pinctrl: meson: meson8b: fix the NAND DQS pins
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: sh-pfc: Update info pointer after SoC-specific init
USB: serial: option: add two Longcheer device ids
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
gfs2: Fix glock rhashtable rcu bug
x86/tools: Fix gcc-7 warning in relocs.c
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
ath10k: override CE5 config for QCA9377
KEYS: Fix an error code in request_master_key()
RDMA/uverbs: Check port number supplied by user verbs cmds
mqueue: fix a use-after-free in sys_mq_notify()
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf intel-pt: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf scripting perl: Fix compile error with some perl5 versions
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf tools: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf script: Use readdir() instead of deprecated readdir_r()
perf tools: Remove duplicate const qualifier
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf pmu: Fix misleadingly indented assignment (whitespace)
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf trace: Do not process PERF_RECORD_LOST twice
perf tests: Remove wrong semicolon in while loop in CQM test
perf tools: Use readdir() instead of deprecated readdir_r() again
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.4.77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 9e52b32567126fe146f198971364f68d3bc5233f upstream.
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.70
usb: misc: legousbtower: Fix buffers on stack
usb: misc: legousbtower: Fix memory leak
USB: ene_usb6250: fix DMA to the stack
watchdog: pcwd_usb: fix NULL-deref at probe
char: lp: fix possible integer overflow in lp_setup()
USB: core: replace %p with %pK
ARM: tegra: paz00: Mark panel regulator as enabled on boot
tpm_crb: check for bad response size
infiniband: call ipv6 route lookup via the stub interface
dm btree: fix for dm_btree_find_lowest_key()
dm raid: select the Kconfig option CONFIG_MD_RAID0
dm bufio: avoid a possible ABBA deadlock
dm bufio: check new buffer allocation watermark every 30 seconds
dm cache metadata: fail operations if fail_io mode has been established
dm bufio: make the parameter "retain_bytes" unsigned long
dm thin metadata: call precommit before saving the roots
dm space map disk: fix some book keeping in the disk space map
md: update slab_cache before releasing new stripes when stripes resizing
rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
mwifiex: pcie: fix cmd_buf use-after-free in remove/reset
ima: accept previously set IMA_NEW_FILE
KVM: x86: Fix load damaged SSEx MXCSR register
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
regulator: tps65023: Fix inverted core enable logic.
s390/kdump: Add final note
s390/cputime: fix incorrect system time
ath9k_htc: Add support of AirTies 1eda:2315 AR9271 device
ath9k_htc: fix NULL-deref at probe
drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.
drm/amdgpu: Make display watermark calculations more accurate
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: handle races with hw when updating the next alarm time
cdc-acm: fix possible invalid access when processing notification
proc: Fix unbalanced hard link numbers
of: fix sparse warning in of_pci_range_parser_one
iio: dac: ad7303: fix channel description
pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()
USB: serial: ftdi_sio: fix setting latency for unprivileged users
USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4 crypto: fix some error handling
net: qmi_wwan: Add SIMCom 7230E
fscrypt: fix context consistency check when key(s) unavailable
f2fs: check entire encrypted bigname when finding a dentry
fscrypt: avoid collisions when presenting long encrypted filenames
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
sched/fair: Initialize throttle_count for new task-groups lazily
usb: host: xhci-plat: propagate return value of platform_get_irq()
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
net: irda: irda-usb: fix firmware name on big-endian hosts
usbvision: fix NULL-deref at probe
mceusb: fix NULL-deref at probe
ttusb2: limit messages to buffer size
usb: musb: tusb6010_omap: Do not reset the other direction's packet size
USB: iowarrior: fix info ioctl on big-endian hosts
usb: serial: option: add Telit ME910 support
USB: serial: qcserial: add more Lenovo EM74xx device IDs
USB: serial: mct_u232: fix big-endian baud-rate handling
USB: serial: io_ti: fix div-by-zero in set_termios
USB: hub: fix SS hub-descriptor handling
USB: hub: fix non-SS hub-descriptor handling
ipx: call ipxitf_put() in ioctl error path
iio: proximity: as3935: fix as3935_write
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
gspca: konica: add missing endpoint sanity check
s5p-mfc: Fix unbalanced call to clock management
dib0700: fix NULL-deref at probe
zr364xx: enforce minimum size when reading header
dvb-frontends/cxd2841er: define symbol_rate_min/max in T/C fe-ops
cx231xx-audio: fix init error path
cx231xx-audio: fix NULL-deref at probe
cx231xx-cards: fix NULL-deref at probe
powerpc/book3s/mce: Move add_taint() later in virtual mode
powerpc/pseries: Fix of_node_put() underflow during DLPAR remove
powerpc/64e: Fix hang when debugging programs with relocated kernel
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
arm64: xchg: hazard against entire exchange variable
arm64: uaccess: ensure extension of access_ok() addr
arm64: documentation: document tagged pointer stack constraints
xc2028: Fix use-after-free bug properly
mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp
staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
metag/uaccess: Fix access_ok()
metag/uaccess: Check access_ok in strncpy_from_user
uwb: fix device quirk on big-endian hosts
genirq: Fix chained interrupt data ordering
osf_wait4(): fix infoleak
tracing/kprobes: Enforce kprobes teardown after testing
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
PCI: Freeze PME scan before suspending devices
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
nfsd: encoders mustn't use unitialized values in error cases
drivers: char: mem: Check for address space wraparound with mmap()
Linux 4.4.70
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 30e7d894c1478c88d50ce94ddcdbd7f9763d9cdd upstream.
Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.
The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.
Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.
Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 6274de498 ("kprobes: Support delayed unoptimizing")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.64:
KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings
KEYS: Change the name of the dead type to ".dead" to prevent user access
KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings
tracing: Allocate the snapshot buffer before enabling probe
ring-buffer: Have ring_buffer_iter_empty() return true when empty
cifs: Do not send echoes before Negotiate is complete
CIFS: remove bad_network_name flag
s390/mm: fix CMMA vs KSM vs others
Drivers: hv: don't leak memory in vmbus_establish_gpadl()
Drivers: hv: get rid of timeout in vmbus_open()
Drivers: hv: vmbus: Reduce the delay between retries in vmbus_post_msg()
VSOCK: Detach QP check should filter out non matching QPs.
Input: elantech - add Fujitsu Lifebook E547 to force crc_enabled
ACPI / power: Avoid maybe-uninitialized warning
mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 card
mac80211: reject ToDS broadcast data frames
ubi/upd: Always flush after prepared for an update
powerpc/kprobe: Fix oops when kprobed on 'stdu' instruction
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd
Tools: hv: kvp: ensure kvp device fd is closed on exec
Drivers: hv: balloon: keep track of where ha_region starts
Drivers: hv: balloon: account for gaps in hot add regions
hv: don't reset hv_context.tsc_page on crash
x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions
block: fix del_gendisk() vs blkdev_ioctl crash
tipc: fix crash during node removal
Linux 4.4.64
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 78f7a45dac2a2d2002f98a3a95f7979867868d73 upstream.
I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:
># cat snapshot
# tracer: nop
#
#
# * Snapshot is allocated *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
But instead it just showed an empty buffer:
># cat snapshot
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.
Fixes: 651e22f2701b ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df62db5be2e5f070ecd1a5ece5945b590ee112e0 upstream.
Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.
Also add a check of the return status of alloc_snapshot().
Fixes: 77fd5c15e3 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.63:
cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups
thp: fix MADV_DONTNEED vs clear soft dirty race
drm/nouveau/mpeg: mthd returns true on success now
drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
CIFS: store results of cifs_reopen_file to avoid infinite wait
Input: xpad - add support for Razer Wildcat gamepad
perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32()
x86/vdso: Ensure vdso32_enabled gets set to valid values only
x86/vdso: Plug race between mapping and ELF header setup
acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)
iscsi-target: Fix TMR reference leak during session shutdown
iscsi-target: Drop work-around for legacy GlobalSAN initiator
scsi: sr: Sanity check returned mode data
scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
scsi: sd: Fix capacity calculation with 32-bit sector_t
xen, fbfront: fix connecting to backend
libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat
irqchip/irq-imx-gpcv2: Fix spinlock initialization
ftrace: Fix removing of second function probe
char: Drop bogus dependency of DEVPORT on !M68K
char: lack of bool string made CONFIG_DEVPORT always on
Revert "MIPS: Lantiq: Fix cascaded IRQ setup"
kvm: fix page struct leak in handle_vmon
zram: do not use copy_page with non-page aligned address
powerpc: Disable HFSCR[TM] if TM is not supported
crypto: ahash - Fix EINPROGRESS notification callback
ath9k: fix NULL pointer dereference
dvb-usb-v2: avoid use-after-free
ext4: fix inode checksum calculation problem if i_extra_size is small
platform/x86: acer-wmi: setup accelerometer when machine has appropriate notify event
rtc: tegra: Implement clock handling
mm: Tighten x86 /dev/mem with zeroing reads
dvb-usb: don't use stack for firmware load
dvb-usb-firmware: don't do DMA on stack
virtio-console: avoid DMA from stack
pegasus: Use heap buffers for all register access
rtl8150: Use heap buffers for all register access
catc: Combine failure cleanup code in catc_probe()
catc: Use heap buffer for memory size test
ibmveth: calculate gso_segs for large packets
SUNRPC: fix refcounting problems with auth_gss messages.
tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
net: ipv6: check route protocol when deleting routes
sctp: deny peeloff operation on asocs with threads sleeping on it
MIPS: fix Select HAVE_IRQ_EXIT_ON_IRQ_STACK patch.
Linux 4.4.63
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 82cc4fc2e70ec5baeff8f776f2773abc8b2cc0ae upstream.
When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.
This is easily reproducable by adding two probes, removing one, and then
adding it back again.
# cd /sys/kernel/debug/tracing
# echo schedule:traceoff > set_ftrace_filter
# echo do_IRQ:traceoff > set_ftrace_filter
# echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
# echo do_IRQ:traceoff > set_ftrace_filter
Causes:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
Modules linked in: [...]
CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
Call Trace:
dump_stack+0x68/0x9f
__warn+0x111/0x130
? trace_irq_work_interrupt+0xa0/0xa0
warn_slowpath_null+0x1d/0x20
ftrace_get_addr_curr+0x143/0x220
? __fentry__+0x10/0x10
ftrace_replace_code+0xe3/0x4f0
? ftrace_int3_handler+0x90/0x90
? printk+0x99/0xb5
? 0xffffffff81000000
ftrace_modify_all_code+0x97/0x110
arch_ftrace_update_code+0x10/0x20
ftrace_run_update_code+0x1c/0x60
ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
register_ftrace_function_probe+0x4b6/0x590
? ftrace_startup+0x310/0x310
? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
? update_stack_state+0x88/0x110
? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
? preempt_count_sub+0x18/0xd0
? mutex_lock_nested+0x104/0x800
? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
? __unwind_start+0x1c0/0x1c0
? _mutex_lock_nest_lock+0x800/0x800
ftrace_trace_probe_callback.isra.3+0xc0/0x130
? func_set_flag+0xe0/0xe0
? __lock_acquire+0x642/0x1790
? __might_fault+0x1e/0x20
? trace_get_user+0x398/0x470
? strcmp+0x35/0x60
ftrace_trace_onoff_callback+0x48/0x70
ftrace_regex_write.isra.43.part.44+0x251/0x320
? match_records+0x420/0x420
ftrace_filter_write+0x2b/0x30
__vfs_write+0xd7/0x330
? do_loop_readv_writev+0x120/0x120
? locks_remove_posix+0x90/0x2f0
? do_lock_file_wait+0x160/0x160
? __lock_is_held+0x93/0x100
? rcu_read_lock_sched_held+0x5c/0xb0
? preempt_count_sub+0x18/0xd0
? __sb_start_write+0x10a/0x230
? vfs_write+0x222/0x240
vfs_write+0xef/0x240
SyS_write+0xab/0x130
? SyS_read+0x130/0x130
? trace_hardirqs_on_caller+0x182/0x280
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0xad
RIP: 0033:0x7fe61c157c30
RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
? trace_hardirqs_off_caller+0xc0/0x110
---[ end trace 99fa09b3d9869c2c ]---
Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)
Fixes: 59df055f1991 ("ftrace: trace different functions with a different tracer")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.61:
drm/vmwgfx: Type-check lookups of fence objects
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: Remove getparam error message
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
sysfs: be careful of error returns from ops->show()
staging: android: ashmem: lseek failed due to no FMODE_LSEEK.
arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm
arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region
iio: bmg160: reset chip when probing
Reset TreeId to zero on SMB2 TREE_CONNECT
ptrace: fix PTRACE_LISTEN race corrupting task->state
ring-buffer: Fix return value check in test_ringbuffer()
metag/usercopy: Drop unused macros
metag/usercopy: Fix alignment error checking
metag/usercopy: Add early abort to copy_to_user
metag/usercopy: Zero rest of buffer from copy_from_user
metag/usercopy: Set flags before ADDZ
metag/usercopy: Fix src fixup in from user rapf loops
metag/usercopy: Add missing fixups
powerpc/mm: Add missing global TLB invalidate if cxl is active
powerpc: Don't try to fix up misaligned load-with-reservation instructions
nios2: reserve boot memory for device tree
s390/decompressor: fix initrd corruption caused by bss clear
s390/uaccess: get_user() should zero on failure (again)
MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels
MIPS: ralink: Fix typos in rt3883 pinctrl
MIPS: End spinlocks with .insn
MIPS: Lantiq: fix missing xbar kernel panic
MIPS: Flush wrong invalid FTLB entry for huge page
mm/mempolicy.c: fix error handling in set_mempolicy and mbind.
Linux 4.4.61
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 4.4.43 stable release
|
|
commit 794de08a16cf1fc1bf785dc48f66d36218cf6d88 upstream.
Both the wakeup and irqsoff tracers can use the function graph tracer when
the display-graph option is set. The problem is that they ignore the notrace
file, and record the entry of functions that would be ignored by the
function_graph tracer. This causes the trace->depth to be recorded into the
ring buffer. The set_graph_notrace uses a trick by adding a large negative
number to the trace->depth when a graph function is to be ignored.
On trace output, the graph function uses the depth to record a stack of
functions. But since the depth is negative, it accesses the array with a
negative number and causes an out of bounds access that can cause a kernel
oops or corrupt data.
Have the print functions handle cases where a tracer still records functions
even when they are in set_graph_notrace.
Also add warnings if the depth is below zero before accessing the array.
Note, the function graph logic will still prevent the return of these
functions from being recorded, which means that they will be left hanging
without a return. For example:
# echo '*spin*' > set_graph_notrace
# echo 1 > options/display-graph
# echo wakeup > current_tracer
# cat trace
[...]
_raw_spin_lock() {
preempt_count_add() {
do_raw_spin_lock() {
update_rq_clock();
Where it should look like:
_raw_spin_lock() {
preempt_count_add();
do_raw_spin_lock();
}
update_rq_clock();
Cc: Namhyung Kim <namhyung.kim@lge.com>
Fixes: 29ad23b00474 ("ftrace: Add set_graph_notrace filter")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Unlike monotonic clock, boot clock as a trace clock will account for
time spent in suspend useful for tracing suspend/resume. This uses
earlier introduced infrastructure for using the fast boot clock.
Bug: b/33184060
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
|
|
(Cherry picked from commit 59643d1535eb220668692a5359de22545af579f6)
If the size passed to ring_buffer_resize() is greater than MAX_LONG - BUF_PAGE_SIZE
then the DIV_ROUND_UP() will return zero.
Here's the details:
# echo 18014398509481980 > /sys/kernel/debug/tracing/buffer_size_kb
tracing_entries_write() processes this and converts kb to bytes.
18014398509481980 << 10 = 18446744073709547520
and this is passed to ring_buffer_resize() as unsigned long size.
size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
Where DIV_ROUND_UP(a, b) is (a + b - 1)/b
BUF_PAGE_SIZE is 4080 and here
18446744073709547520 + 4080 - 1 = 18446744073709551599
where 18446744073709551599 is still smaller than 2^64
2^64 - 18446744073709551599 = 17
But now 18446744073709551599 / 4080 = 4521260802379792
and size = size * 4080 = 18446744073709551360
This is checked to make sure its still greater than 2 * 4080,
which it is.
Then we convert to the number of buffer pages needed.
nr_page = DIV_ROUND_UP(size, BUF_PAGE_SIZE)
but this time size is 18446744073709551360 and
2^64 - (18446744073709551360 + 4080 - 1) = -3823
Thus it overflows and the resulting number is less than 4080, which makes
3823 / 4080 = 0
an nr_pages is set to this. As we already checked against the minimum that
nr_pages may be, this causes the logic to fail as well, and we crash the
kernel.
There's no reason to have the two DIV_ROUND_UP() (that's just result of
historical code changes), clean up the code and fix this bug.
Cc: stable@vger.kernel.org # 3.5+
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Change-Id: I1147672317a3ad0fc995b1f32baaa050a7976ac4
Bug: 32659848
|
|
This is the 4.4.23 stable release
|
|
commit 1245800c0f96eb6ebb368593e251d66c01e61022 upstream.
The iter->seq can be reset outside the protection of the mutex. So can
reading of user data. Move the mutex up to the beginning of the function.
Fixes: d7350c3f45694 ("tracing/core: make the read callbacks reentrants")
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1ae2293dd6d2f5c823cf97e60b70d03631cd622f upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 377ccbb483738f84400ddf5840c7dd8825716985 upstream.
With the latest gcc compilers, they give a warning if
__builtin_return_address() parameter is greater than 0. That is because if
it is used by a function called by a top level function (or in the case of
the kernel, by assembly), it can try to access stack frames outside the
stack and crash the system.
The tracing system uses __builtin_return_address() of up to 2! But it is
well aware of the dangers that it may have, and has even added precautions
to protect against it (see the thunk code in arch/x86/entry/thunk*.S)
Linus originally added KBUILD_CFLAGS that would suppress the warning for the
entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory
wouldn't work. The tracing directory plays a bit with the CFLAGS and
requires a little more logic.
This adds that special logic to only suppress the warning for the tracing
directory. If it is used anywhere else outside of tracing, the warning will
still be triggered.
Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.home
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the 4.4.16 stable release
Change-Id: Ibaf7b7e03695e1acebc654a2ca1a4bfcc48fcea4
|
|
commit 70c8217acd4383e069fe1898bbad36ea4fcdbdcc upstream.
If a task uses a non constant string for the format parameter in
trace_printk(), then the trace_printk_fmt variable is set to NULL. This
variable is then saved in the __trace_printk_fmt section.
The function hold_module_trace_bprintk_format() checks to see if duplicate
formats are used by modules, and reuses them if so (saves them to the list
if it is new). But this function calls lookup_format() that does a strcmp()
to the value (which is now NULL) and can cause a kernel oops.
This wasn't an issue till 3debb0a9ddb ("tracing: Fix trace_printk() to print
when not using bprintk()") which added "__used" to the trace_printk_fmt
variable, and before that, the kernel simply optimized it out (no NULL value
was saved).
The fix is simply to handle the NULL pointer in lookup_format() and have the
caller ignore the value if it was NULL.
Link: http://lkml.kernel.org/r/1464769870-18344-1-git-send-email-zhengjun.xing@intel.com
Reported-by: xingzhen <zhengjun.xing@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 3debb0a9ddb ("tracing: Fix trace_printk() to print when not using bprintk()")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59643d1535eb220668692a5359de22545af579f6 upstream.
If the size passed to ring_buffer_resize() is greater than MAX_LONG - BUF_PAGE_SIZE
then the DIV_ROUND_UP() will return zero.
Here's the details:
# echo 18014398509481980 > /sys/kernel/debug/tracing/buffer_size_kb
tracing_entries_write() processes this and converts kb to bytes.
18014398509481980 << 10 = 18446744073709547520
and this is passed to ring_buffer_resize() as unsigned long size.
size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
Where DIV_ROUND_UP(a, b) is (a + b - 1)/b
BUF_PAGE_SIZE is 4080 and here
18446744073709547520 + 4080 - 1 = 18446744073709551599
where 18446744073709551599 is still smaller than 2^64
2^64 - 18446744073709551599 = 17
But now 18446744073709551599 / 4080 = 4521260802379792
and size = size * 4080 = 18446744073709551360
This is checked to make sure its still greater than 2 * 4080,
which it is.
Then we convert to the number of buffer pages needed.
nr_page = DIV_ROUND_UP(size, BUF_PAGE_SIZE)
but this time size is 18446744073709551360 and
2^64 - (18446744073709551360 + 4080 - 1) = -3823
Thus it overflows and the resulting number is less than 4080, which makes
3823 / 4080 = 0
an nr_pages is set to this. As we already checked against the minimum that
nr_pages may be, this causes the logic to fail as well, and we crash the
kernel.
There's no reason to have the two DIV_ROUND_UP() (that's just result of
historical code changes), clean up the code and fix this bug.
Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b94a8fba501f38368aef6ac1b30e7335252a220 upstream.
The size variable to change the ring buffer in ftrace is a long. The
nr_pages used to update the ring buffer based on the size is int. On 64 bit
machines this can cause an overflow problem.
For example, the following will cause the ring buffer to crash:
# cd /sys/kernel/debug/tracing
# echo 10 > buffer_size_kb
# echo 8556384240 > buffer_size_kb
Then you get the warning of:
WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260
Which is:
RB_WARN_ON(cpu_buffer, nr_removed);
Note each ring buffer page holds 4080 bytes.
This is because:
1) 10 causes the ring buffer to have 3 pages.
(10kb requires 3 * 4080 pages to hold)
2) (2^31 / 2^10 + 1) * 4080 = 8556384240
The value written into buffer_size_kb is shifted by 10 and then passed
to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760
3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE
which is 4080. 8761737461760 / 4080 = 2147484672
4) nr_pages is subtracted from the current nr_pages (3) and we get:
2147484669. This value is saved in a signed integer nr_pages_to_update
5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int
turns into the value of -2147482627
6) As the value is a negative number, in update_pages_handler() it is
negated and passed to rb_remove_pages() and 2147482627 pages will
be removed, which is much larger than 3 and it causes the warning
because not all the pages asked to be removed were removed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001
Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer")
Reported-by: Hao Qin <QEver.cn@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 854145e0a8e9a05f7366d240e2f99d9c1ca6d6dd upstream.
Currently register functions for events will be called
through the 'reg' field of event class directly without
any check when seting up triggers.
Triggers for events that don't support register through
debug fs (events under events/ftrace are for trace-cmd to
read event format, and most of them don't have a register
function except events/ftrace/functionx) can't be enabled
at all, and an oops will be hit when setting up trigger
for those events, so just not creating them is an easy way
to avoid the oops.
Link: http://lkml.kernel.org/r/1462275274-3911-1-git-send-email-chuhu@redhat.com
Fixes: 85f2b08268c01 ("tracing: Add basic event trigger framework")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3debb0a9ddb16526de8b456491b7db60114f7b5e upstream.
The trace_printk() code will allocate extra buffers if the compile detects
that a trace_printk() is used. To do this, the format of the trace_printk()
is saved to the __trace_printk_fmt section, and if that section is bigger
than zero, the buffers are allocated (along with a message that this has
happened).
If trace_printk() uses a format that is not a constant, and thus something
not guaranteed to be around when the print happens, the compiler optimizes
the fmt out, as it is not used, and the __trace_printk_fmt section is not
filled. This means the kernel will not allocate the special buffers needed
for the trace_printk() and the trace_printk() will not write anything to the
tracing buffer.
Adding a "__used" to the variable in the __trace_printk_fmt section will
keep it around, even though it is set to NULL. This will keep the string
from being printed in the debugfs/tracing/printk_formats section as it is
not needed.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 07d777fe8c398 "tracing: Add percpu buffers for trace_printk()"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a29054d9478d0435ab01b7544da4f674ab13f533 upstream.
If tracing contains data and the trace_pipe file is read with sendfile(),
then it can trigger a NULL pointer dereference and various BUG_ON within the
VM code.
There's a patch to fix this in the splice_to_pipe() code, but it's also a
good idea to not let that happen from trace_pipe either.
Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in
Reported-by: Rabin Vincent <rabin.vincent@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb86e05390debcc084cfdb0a71ed4c5dbbec517d upstream.
Joel Fernandes reported that the function tracing of preempt disabled
sections was not being reported when running either the preemptirqsoff or
preemptoff tracers. This was due to the fact that the function tracer
callback for those tracers checked if irqs were disabled before tracing. But
this fails when we want to trace preempt off locations as well.
Joel explained that he wanted to see funcitons where interrupts are enabled
but preemption was disabled. The expected output he wanted:
<...>-2265 1d.h1 3419us : preempt_count_sub <-irq_exit
<...>-2265 1d..1 3419us : __do_softirq <-irq_exit
<...>-2265 1d..1 3419us : msecs_to_jiffies <-__do_softirq
<...>-2265 1d..1 3420us : irqtime_account_irq <-__do_softirq
<...>-2265 1d..1 3420us : __local_bh_disable_ip <-__do_softirq
<...>-2265 1..s1 3421us : run_timer_softirq <-__do_softirq
<...>-2265 1..s1 3421us : hrtimer_run_pending <-run_timer_softirq
<...>-2265 1..s1 3421us : _raw_spin_lock_irq <-run_timer_softirq
<...>-2265 1d.s1 3422us : preempt_count_add <-_raw_spin_lock_irq
<...>-2265 1d.s2 3422us : _raw_spin_unlock_irq <-run_timer_softirq
<...>-2265 1..s2 3422us : preempt_count_sub <-_raw_spin_unlock_irq
<...>-2265 1..s1 3423us : rcu_bh_qs <-__do_softirq
<...>-2265 1d.s1 3423us : irqtime_account_irq <-__do_softirq
<...>-2265 1d.s1 3423us : __local_bh_enable <-__do_softirq
There's a comment saying that the irq disabled check is because there's a
possible race that tracing_cpu may be set when the function is executed. But
I don't remember that race. For now, I added a check for preemption being
enabled too to not record the function, as there would be no race if that
was the case. I need to re-investigate this, as I'm now thinking that the
tracing_cpu will always be correct. But no harm in keeping the check for
now, except for the slight performance hit.
Link: http://lkml.kernel.org/r/1457770386-88717-1-git-send-email-agnel.joel@gmail.com
Fixes: 5e6d2b9cfa3a "tracing: Use one prologue for the preempt irqs off tracer function tracers"
Reported-by: Joel Fernandes <agnel.joel@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e57cbaf0eb006eaa207395f3bfd7ce52c1b5539c upstream.
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be migrated.
echo 'comm == "bash"' > events/sched_migrate_task/filter
will now filter all sched_migrate_task events for tasks named "bash" that
migrates other tasks (in interrupt context), instead of seeing when "bash"
itself gets migrated.
This fix requires a couple of changes.
1) Change the look up order for filter predicates to look at the events
fields before looking at the generic filters.
2) Instead of basing the filter function off of the "comm" name, have the
generic "comm" filter have its own filter_type (FILTER_COMM). Test
against the type instead of the name to assign the filter function.
3) Add a new "COMM" filter that works just like "comm" but will filter based
on the current task, even if the trace event contains a "comm" field.
Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU".
Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names"
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d045437a169f899dfb0f6f7ede24cc042543ced9 upstream.
The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.
Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.
Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.
One documented way to enable all events is to:
cat available_events > set_event
But because the function event is displayed in the available_events, this
now causes an INVALID error:
cat: write error: Invalid argument
Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ccd83714a009ee301b50c15f6c3a5dc1f30164c upstream.
When a max stack trace is discovered, the stack dump is saved. In order to
not record the overhead of the stack tracer, the ip of the traced function
is looked for within the dump. The trace is started from the location of
that function. But if for some reason the ip is not found, the entire stack
trace is then truncated. That's not very useful. Instead, print everything
if the ip of the traced function is not found within the trace.
This issue showed up on s390.
Link: http://lkml.kernel.org/r/20160129102241.1b3c9c04@gandalf.local.home
Fixes: 72ac426a5bb0 ("tracing: Clean up stack tracing and fix fentry updates")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7717c6be699975f6733d278b13b7c4295d73caf6 upstream.
While cleaning the stacktrace code I unintentially changed the skip depth of
trace_buffer_unlock_commit_regs() from 0 to 6. kprobes uses this function,
and with skipping 6 call backs, it can easily produce no stack.
Here's how I tested it:
# echo 'p:ext4_sync_fs ext4_sync_fs ' > /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
# cat /sys/kernel/debug/trace
sync-2394 [005] 502.457060: ext4_sync_fs: (ffffffff81317650)
sync-2394 [005] 502.457063: kernel_stack: <stack trace>
sync-2394 [005] 502.457086: ext4_sync_fs: (ffffffff81317650)
sync-2394 [005] 502.457087: kernel_stack: <stack trace>
sync-2394 [005] 502.457091: ext4_sync_fs: (ffffffff81317650)
After putting back the skip stack to zero, we have:
sync-2270 [000] 748.052693: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.052695: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
sync-2270 [000] 748.053017: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.053019: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
sync-2270 [000] 748.053381: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.053383: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
Fixes: 73dddbb57bb0 "tracing: Only create stacktrace option when STACKTRACE is configured"
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change-Id: Id88b5d30847bc6d3cfe1d8cd00cbdc975c9712d1
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
Add the 'funcgraph-flat' option to the function_graph tracer to use the default
trace printing format rather than the hierarchical formatting normally used.
Change-Id: If2900bfb86e6f8f51379f56da4f6fabafa630909
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
The tgids are tracked along side the saved_cmdlines tracking, and can be
included in trace output by enabling the 'print-tgid' trace option. This is
useful when doing post-processing of the trace data, as it allows events to be
grouped by tgid.
Change-Id: I52ed04c3a8ca7fddbb868b792ce5d21ceb76250e
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
Change-Id: I0607b9c776acf61cb796b8572cf8cfb8b2dc1377
Signed-off-by: Jamie Gennis <jgennis@google.com>
|
|
When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel
panic at t_show.
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2
RIP: 0010:[<ffffffff811375b2>]
[<ffffffff811375b2>] t_show+0x22/0xe0
RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004
RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1
RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec
R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0
R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570
FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0
Call Trace:
[<ffffffff811dc076>] seq_read+0x2f6/0x3e0
[<ffffffff811b749b>] vfs_read+0x9b/0x160
[<ffffffff811b7f69>] SyS_read+0x49/0xb0
[<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13
---[ end trace 5bd9eb630614861e ]---
Kernel panic - not syncing: Fatal exception
When the first time find_next calls find_next_mod_format, it should
iterate the trace_bprintk_fmt_list to find the first print format of
the module. However in current code, start_index is smaller than *pos
at first, and code will not iterate the list. Latter container_of will
get the wrong address with former v, which will cause mod_fmt be a
meaningless object and so is the returned mod_fmt->fmt.
This patch will fix it by correcting the start_index. After fixed,
when the first time calls find_next_mod_format, start_index will be
equal to *pos, and code will iterate the trace_bprintk_fmt_list to
get the right module printk format, so is the returned mod_fmt->fmt.
Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com
Cc: stable@vger.kernel.org # 3.12+
Fixes: 102c9323c35a8 "tracing: Add __tracepoint_string() to export string pointers"
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree includes four core perf fixes for misc bugs, three fixes to
x86 PMU drivers, and two updates to old email addresses"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do not send exit event twice
perf/x86/intel: Fix INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA macro
perf/x86/intel: Make L1D_PEND_MISS.FB_FULL not constrained on Haswell
perf: Fix PERF_EVENT_IOC_PERIOD deadlock
treewide: Remove old email address
perf/x86: Fix LBR call stack save/restore
perf: Update email address in MAINTAINERS
perf/core: Robustify the perf_cgroup_from_task() RCU checks
perf/core: Fix RCU problem with cgroup context switching code
|
|
The set_event_pid filter relies on attaching to the sched_switch and
sched_wakeup tracepoints to see if it should filter the tracing on schedule
tracepoints. By adding the callbacks to sched_wakeup, pids in the
set_event_pid file will trace the wakeups of those tasks with those pids.
But sched_wakeup_new and sched_waking were missed. These two should also be
traced. Luckily, these tracepoints share the same class as sched_wakeup
which means they can use the same pre and post callbacks as sched_wakeup
does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Commit fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing
data" added a descriptor that holds various data instead of passing around
several variables through parameters. The problem was that one of the
parameters was modified in a function and the code was designed not to have
an effect on that modified parameter. Now that the parameter is a
descriptor and any modifications to it are non-volatile, the size of the
data could be unnecessarily expanded.
Remove the extra space added if a timestamp was added and the event went
across the page.
Cc: stable@vger.kernel.org # 4.3+
Fixes: fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing data"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Do not update the read stamp after swapping out the reader page from the
write buffer. If the reader page is swapped out of the buffer before an
event is written to it, then the read_stamp may get an out of date
timestamp, as the page timestamp is updated on the first commit to that
page.
rb_get_reader_page() only returns a page if it has an event on it, otherwise
it will return NULL. At that point, check if the page being returned has
events and has not been read yet. Then at that point update the read_stamp
to match the time stamp of the reader page.
Cc: stable@vger.kernel.org # 2.6.30+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There were still a number of references to my old Red Hat email
address in the kernel source. Remove these while keeping the
Red Hat copyright notices intact.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull trace cleanups from Steven Rostedt:
"This contains three more clean up patches.
One patch is needed to make tracing work without debugfs now that
tracing uses its own tracefs.
The second is removing an unused variable.
The third is fixing a warning about unused variables when MAX_TRACER
is not configured. Note, this warning shows up in gcc 6.0, but does
not show up in gcc 4.9, as it seems that gcc does not complain about
constants not being used"
* tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set
tracing: Remove unused ftrace_cpu_disabled per cpu variable
tracing: Make tracing work when debugfs is not configured in
|
|
Pull networking fixes from David Miller:
1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.
2) Several spots need to get to the original listner for SYN-ACK
packets, most spots got this ok but some were not. Whilst covering
the remaining cases, create a helper to do this. From Eric Dumazet.
3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
from Rasmus Villemoes.
4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.
5) Use after free in mvneta driver, from Justin Maggard.
6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.
7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd
Bergmann.
8) Fix multicast getsockopt deadlock, from WANG Cong.
9) Fix deadlock in btusb, from Kuba Pawlak.
10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
counter state. From Sabrina Dubroca.
11) Fix packet_bind() race, which can cause lost notifications, from
Francesco Ruggeri.
12) Fix MAC restoration in qlcnic driver during bonding mode changes,
from Jarod Wilson.
13) Revert bridging forward delay change which broke libvirt and other
userspace things, from Vlad Yasevich.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
Revert "bridge: Allow forward delay to be cfgd when STP enabled"
bpf_trace: Make dependent on PERF_EVENTS
qed: select ZLIB_INFLATE
net: fix a race in dst_release()
net: mvneta: Fix memory use after free.
net: Documentation: Fix default value tcp_limit_output_bytes
macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
mvneta: add FIXED_PHY dependency
net: caif: check return value of alloc_netdev
net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
drivers: net: xgene: fix RGMII 10/100Mb mode
netfilter: nft_meta: use skb_to_full_sk() helper
net_sched: em_meta: use skb_to_full_sk() helper
sched: cls_flow: use skb_to_full_sk() helper
netfilter: xt_owner: use skb_to_full_sk() helper
smack: use skb_to_full_sk() helper
net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
bpf: doc: correct arch list for supported eBPF JIT
dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
bonding: fix panic on non-ARPHRD_ETHER enslave failure
...
|
|
Arnd Bergmann reported:
In my ARM randconfig tests, I'm getting a build error for
newly added code in bpf_perf_event_read and bpf_perf_event_output
whenever CONFIG_PERF_EVENTS is disabled:
kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read':
kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu'
if (event->oncpu != smp_processor_id() ||
^
kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu'
event->pmu->count)
This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT
is disabled. I'm not sure if that is a configuration we care
about, otherwise we could prevent this case from occuring by
adding Kconfig dependencies.
Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS.
By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine.
Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tracing_max_lat_fops is used only when TRACER_MAX_TRACE enabled, so also
swith the related code. The related warning with defconfig under x86_64:
CC kernel/trace/trace.o
kernel/trace/trace.c:5466:37: warning: ‘tracing_max_lat_fops’ defined but not used [-Wunused-const-variable]
static const struct file_operations tracing_max_lat_fops = {
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Since the ring buffer is lockless, there is no need to disable ftrace on
CPU. And no one doing so: after commit 68179686ac67cb ("tracing: Remove
ftrace_disable/enable_cpu()") ftrace_cpu_disabled stays the same after
initialization, nothing changes it.
ftrace_cpu_disabled shouldn't be used by any external module since it
disables only function and graph_function tracers but not any other
tracer.
Link: http://lkml.kernel.org/r/1446836846-22239-1-git-send-email-0x7f454c46@gmail.com
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracking updates from Steven Rostedt:
"Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge
window opened and found lots of patches to pull. I ran them through
all my tests and they were in linux-next for a few days.
Features added this release:
----------------------------
- Module globbing. You can now filter function tracing to several
modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
- Tracer specific options are now visible even when the tracer is not
active. It was rather annoying that you can only see and modify
tracer options after enabling the tracer. Now they are in the
options/ directory even when the tracer is not active. Although
they are still only visible when the tracer is active in the
trace_options file.
- Trace options are now per instance (although some of the tracer
specific options are global)
- New tracefs file: set_event_pid. If any pid is added to this file,
then all events in the instance will filter out events that are not
part of this pid. sched_switch and sched_wakeup events handle next
and the wakee pids"
* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
tracefs: Fix refcount imbalance in start_creating()
tracing: Put back comma for empty fields in boot string parsing
tracing: Apply tracer specific options from kernel command line.
tracing: Add some documentation about set_event_pid
ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
tracing: Allow dumping traces without tracking trace started cpus
ring_buffer: Fix more races when terminating the producer in the benchmark
ring_buffer: Do no not complete benchmark reader too early
tracing: Remove redundant TP_ARGS redefining
tracing: Rename max_stack_lock to stack_trace_max_lock
tracing: Allow arch-specific stack tracer
recordmcount: arm64: Replace the ignored mcount call into nop
recordmcount: Fix endianness handling bug for nop_mcount
tracepoints: Fix documentation of RCU lockdep checks
tracing: ftrace_event_is_function() can return boolean
tracing: is_legal_op() can return boolean
ring-buffer: rb_event_is_commit() can return boolean
ring-buffer: rb_per_cpu_empty() can return boolean
ring_buffer: ring_buffer_empty{cpu}() can return boolean
ring-buffer: rb_is_reader_page() can return boolean
...
|