summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2020-06-20kgdb: Prevent infinite recursive entries to the debuggerDouglas Anderson
[ Upstream commit 3ca676e4ca60d1834bb77535dafe24169cadacef ] If we detect that we recursively entered the debugger we should hack our I/O ops to NULL so that the panic() in the next line won't actually cause another recursion into the debugger. The first line of kgdb_panic() will check this and return. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20sched/fair: Don't NUMA balance for kthreadsJens Axboe
[ Upstream commit 18f855e574d9799a0e7489f8ae6fd8447d0dd74a ] Stefano reported a crash with using SQPOLL with io_uring: BUG: kernel NULL pointer dereference, address: 00000000000003b0 CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11 RIP: 0010:task_numa_work+0x4f/0x2c0 Call Trace: task_work_run+0x68/0xa0 io_sq_thread+0x252/0x3d0 kthread+0xf9/0x130 ret_from_fork+0x35/0x40 which is task_numa_work() oopsing on current->mm being NULL. The task work is queued by task_tick_numa(), which checks if current->mm is NULL at the time of the call. But this state isn't necessarily persistent, if the kthread is using use_mm() to temporarily adopt the mm of a task. Change the task_tick_numa() check to exclude kernel threads in general, as it doesn't make sense to attempt ot balance for kthreads anyway. Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-11uprobes: ensure that uprobe->offset and ->ref_ctr_offset are properly alignedOleg Nesterov
commit 013b2deba9a6b80ca02f4fafd7dedf875e9b4450 upstream. uprobe_write_opcode() must not cross page boundary; prepare_uprobe() relies on arch_uprobe_analyze_insn() which should validate "vaddr" but some architectures (csky, s390, and sparc) don't do this. We can remove the BUG_ON() check in prepare_uprobe() and validate the offset early in __uprobe_register(). The new IS_ALIGNED() check matches the alignment check in arch_prepare_kprobe() on supported architectures, so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE. Another problem is __update_ref_ctr() which was wrong from the very beginning, it can read/write outside of kmap'ed page unless "vaddr" is aligned to sizeof(short), __uprobe_register() should check this too. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Sven Schnelle <svens@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ check for ref_ctr_offset removed for backport - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03genirq/generic_pending: Do not lose pending affinity updateThomas Gleixner
commit a33a5d2d16cb84bea8d5f5510f3a41aa48b5c467 upstream. The generic pending interrupt mechanism moves interrupts from the interrupt handler on the original target CPU to the new destination CPU. This is required for x86 and ia64 due to the way the interrupt delivery and acknowledge works if the interrupts are not remapped. However that update can fail for various reasons. Some of them are valid reasons to discard the pending update, but the case, when the previous move has not been fully cleaned up is not a legit reason to fail. Check the return value of irq_do_set_affinity() for -EBUSY, which indicates a pending cleanup, and rearm the pending move in the irq dexcriptor so it's tried again when the next interrupt arrives. Fixes: 996c591227d9 ("x86/irq: Plug vector cleanup race") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis <mike.travis@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27padata: purge get_cpu and reorder_via_wq from padata_do_serialDaniel Jordan
[ Upstream commit 065cf577135a4977931c7a1e1edf442bfd9773dd] With the removal of the padata timer, padata_do_serial no longer needs special CPU handling, so remove it. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27padata: initialize pd->cpu with effective cpumaskDaniel Jordan
[ Upstream commit ec9c7d19336ee98ecba8de80128aa405c45feebb ] Exercising CPU hotplug on a 5.2 kernel with recent padata fixes from cryptodev-2.6.git in an 8-CPU kvm guest... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo c > /sys/kernel/pcrypt/pencrypt/parallel_cpumask # modprobe tcrypt mode=215 ...caused the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 134 Comm: kworker/2:2 Not tainted 5.2.0-padata-base+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-<snip> Workqueue: pencrypt padata_parallel_worker RIP: 0010:padata_reorder+0xcb/0x180 ... Call Trace: padata_do_serial+0x57/0x60 pcrypt_aead_enc+0x3a/0x50 [pcrypt] padata_parallel_worker+0x9b/0xe0 process_one_work+0x1b5/0x3f0 worker_thread+0x4a/0x3c0 ... In padata_alloc_pd, pd->cpu is set using the user-supplied cpumask instead of the effective cpumask, and in this case cpumask_first picked an offline CPU. The offline CPU's reorder->list.next is NULL in padata_reorder because the list wasn't initialized in padata_init_pqueues, which only operates on CPUs in the effective mask. Fix by using the effective mask in padata_alloc_pd. Fixes: 6fc4dbcf0276 ("padata: Replace delayed timer with immediate workqueue in padata_reorder") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27padata: Replace delayed timer with immediate workqueue in padata_reorderHerbert Xu
[ Upstream commit 6fc4dbcf0276279d488c5fbbfabe94734134f4fa ] The function padata_reorder will use a timer when it cannot progress while completed jobs are outstanding (pd->reorder_objects > 0). This is suboptimal as if we do end up using the timer then it would have introduced a gratuitous delay of one second. In fact we can easily distinguish between whether completed jobs are outstanding and whether we can make progress. All we have to do is look at the next pqueue list. This patch does that by replacing pd->processed with pd->cpu so that the next pqueue is more accessible. A work queue is used instead of the original try_again to avoid hogging the CPU. Note that we don't bother removing the work queue in padata_flush_queues because the whole premise is broken. You cannot flush async crypto requests so it makes no sense to even try. A subsequent patch will fix it by replacing it with a ref counting scheme. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [dj: - adjust context - corrected setup_timer -> timer_setup to delete hunk - skip padata_flush_queues() hunk, function already removed in 4.4] Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27padata: set cpu_index of unused CPUs to -1Mathias Krause
[ Upstream commit 1bd845bcb41d5b7f83745e0cb99273eb376f2ec5 ] The parallel queue per-cpu data structure gets initialized only for CPUs in the 'pcpu' CPU mask set. This is not sufficient as the reorder timer may run on a different CPU and might wrongly decide it's the target CPU for the next reorder item as per-cpu memory gets memset(0) and we might be waiting for the first CPU in cpumask.pcpu, i.e. cpu_index 0. Make the '__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index' compare in padata_get_next() fail in this case by initializing the cpu_index member of all per-cpu parallel queues. Use -1 for unused ones. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27padata: ensure padata_do_serial() runs on the correct CPUMathias Krause
commit 350ef88e7e922354f82a931897ad4a4ce6c686ff upstream. If the algorithm we're parallelizing is asynchronous we might change CPUs between padata_do_parallel() and padata_do_serial(). However, we don't expect this to happen as we need to enqueue the padata object into the per-cpu reorder queue we took it from, i.e. the same-cpu's parallel queue. Ensure we're not switching CPUs for a given padata object by tracking the CPU within the padata object. If the serial callback gets called on the wrong CPU, defer invoking padata_reorder() via a kernel worker on the CPU we're expected to run on. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27padata: ensure the reorder timer callback runs on the correct CPUMathias Krause
commit cf5868c8a22dc2854b96e9569064bb92365549ca upstream. The reorder timer function runs on the CPU where the timer interrupt was handled which is not necessarily one of the CPUs of the 'pcpu' CPU mask set. Ensure the padata_reorder() callback runs on the correct CPU, which is one in the 'pcpu' CPU mask set and, preferrably, the next expected one. Do so by comparing the current CPU with the expected target CPU. If they match, call padata_reorder() right away. If they differ, schedule a work item on the target CPU that does the padata_reorder() call for us. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27padata: get_next is never NULLJason A. Donenfeld
commit 69b348449bda0f9588737539cfe135774c9939a7 upstream. Per Dan's static checker warning, the code that returns NULL was removed in 2010, so this patch updates the comments and fixes the code assumptions. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27padata: Remove unused but set variablesTobias Klauser
commit 119a0798dc42ed4c4f96d39b8b676efcea73aec6 upstream. Remove the unused but set variable pinst in padata_parallel_worker to fix the following warning when building with 'W=1': kernel/padata.c: In function ‘padata_parallel_worker’: kernel/padata.c:68:26: warning: variable ‘pinst’ set but not used [-Wunused-but-set-variable] Also remove the now unused variable pd which is only used to set pinst. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20Stop the ad-hoc games with -Wno-maybe-initializedLinus Torvalds
commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream. We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20kbuild: compute false-positive -Wmaybe-uninitialized cases in KconfigMasahiro Yamada
commit b303c6df80c9f8f13785aa83a0471fca7e38b24d upstream. Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched various false positives: - commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os") turned off this option for -Os. - commit 815eb71e7149 ("Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for CONFIG_PROFILE_ALL_BRANCHES - commit a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") turned off this option for GCC < 4.9 Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903 I think this looks better by shifting the logic from Makefile to Kconfig. Link: https://github.com/ClangBuiltLinux/linux/issues/350 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20ptp: fix the race between the release of ptp_clock and cdevVladis Dronov
commit a33121e5487b424339636b25c35d3a180eaa5f5e upstream. In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blktrace: fix dereference after null checkCengiz Can
commit 153031a301bb07194e9c37466cfce8eacb977621 upstream. There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Cengiz Can <cengiz@kernel.wtf> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blktrace: Protect q->blk_trace with RCUJan Kara
commit c780e86dd48ef6467a1146cf7d0fe1e05a635039 upstream. KASAN is reporting that __blk_add_trace() has a use-after-free issue when accessing q->blk_trace. Indeed the switching of block tracing (and thus eventual freeing of q->blk_trace) is completely unsynchronized with the currently running tracing and thus it can happen that the blk_trace structure is being freed just while __blk_add_trace() works on it. Protect accesses to q->blk_trace by RCU during tracing and make sure we wait for the end of RCU grace period when shutting down tracing. Luckily that is rare enough event that we can afford that. Note that postponing the freeing of blk_trace to an RCU callback should better be avoided as it could have unexpected user visible side-effects as debugfs files would be still existing for a short while block tracing has been shut down. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711 CC: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Tristan Madani <tristmd@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> [bwh: Backported to 4.4: - Drop changes in blk_trace_note_message_enabled(), blk_trace_bio_get_cgid() - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blktrace: fix trace mutex deadlockJens Axboe
commit 2967acbb257a6a9bf912f4778b727e00972eac9b upstream. A previous commit changed the locking around registration/cleanup, but direct callers of blk_trace_remove() were missed. This means that if we hit the error path in setup, we will deadlock on attempting to re-acquire the queue trace mutex. Fixes: 1f2cac107c59 ("blktrace: fix unlocked access to init/start-stop/teardown") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blktrace: fix unlocked access to init/start-stop/teardownJens Axboe
commit 1f2cac107c591c24b60b115d6050adc213d10fc0 upstream. sg.c calls into the blktrace functions without holding the proper queue mutex for doing setup, start/stop, or teardown. Add internal unlocked variants, and export the ones that do the proper locking. Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices") Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-20blktrace: Fix potential deadlock between delete & sysfs opsWaiman Long
commit 5acb3cc2c2e9d3020a4fee43763c6463767f1572 upstream. The lockdep code had reported the following unsafe locking scenario: CPU0 CPU1 ---- ---- lock(s_active#228); lock(&bdev->bd_mutex/1); lock(s_active#228); lock(&bdev->bd_mutex); *** DEADLOCK *** The deadlock may happen when one task (CPU1) is trying to delete a partition in a block device and another task (CPU0) is accessing tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that partition. The s_active isn't an actual lock. It is a reference count (kn->count) on the sysfs (kernfs) file. Removal of a sysfs file, however, require a wait until all the references are gone. The reference count is treated like a rwsem using lockdep instrumentation code. The fact that a thread is in the sysfs callback method or in the ioctl call means there is a reference to the opended sysfs or device file. That should prevent the underlying block structure from being removed. Instead of using bd_mutex in the block_device structure, a new blk_trace_mutex is now added to the request_queue structure to protect access to the blk_trace structure. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Fix typo in patch subject line, and prune a comment detailing how the code used to work. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10sched/fair: Fix calc_cfs_shares() fixed point arithmetics width confusionPeter Zijlstra
commit ea1dc6fc6242f991656e35e2ed3d90ec1cd13418 upstream. Commit: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") did something non-obvious but also did it buggy yet latent. The problem was exposed for real by a later commit in the v4.7 merge window: 2159197d6677 ("sched/core: Enable increased load resolution on 64-bit kernels") ... after which tg->load_avg and cfs_rq->load.weight had different units (10 bit fixed point and 20 bit fixed point resp.). Add a comment to explain the use of cfs_rq->load.weight over the 'natural' cfs_rq->avg.load_avg and add scale_load_down() to correct for the difference in unit. Since this is (now, as per a previous commit) the only user of calc_tg_weight(), collapse it. The effects of this bug should be randomly inconsistent SMP-balancing of cgroups workloads. Reported-by: Jirka Hladky <jhladky@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 2159197d6677 ("sched/core: Enable increased load resolution on 64-bit kernels") Fixes: fde7d22e01aa ("sched/fair: Fix overly small weight for interactive group entities") Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10bpf: fix map not being uncharged during map creation failureDaniel Borkmann
commit 20b2b24f91f70e7d3f0918c077546cb21bd73a87 upstream. In map_create(), we first find and create the map, then once that suceeded, we charge it to the user's RLIMIT_MEMLOCK, and then fetch a new anon fd through anon_inode_getfd(). The problem is, once the latter fails f.e. due to RLIMIT_NOFILE limit, then we only destruct the map via map->ops->map_free(), but without uncharging the previously locked memory first. That means that the user_struct allocation is leaked as well as the accounted RLIMIT_MEMLOCK memory not released. Make the label names in the fix consistent with bpf_prog_load(). Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10bpf, trace: check event type in bpf_perf_event_readAlexei Starovoitov
commit ad572d174787daa59e24b8b5c83028c09cdb5ddb upstream. similar to bpf_perf_event_output() the bpf_perf_event_read() helper needs to check the type of the perf_event before reading the counter. Fixes: a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02perf/core: fix parent pid/tid in task exit eventsIan Rogers
commit f3bed55e850926614b9898fe982f66d2541a36a5 upstream. Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by: KP Singh <kpsingh@google.com> Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02audit: check the length of userspace generated audit recordsPaul Moore
commit 763dafc520add02a1f4639b500c509acc0ea8e5b upstream. Commit 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02kernel/gcov/fs.c: gcov_seq_next() should increase position indexVasily Averin
[ Upstream commit f4d74ef6220c1eda0875da30457bef5c7111ab06 ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: NeilBrown <neilb@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Waiman Long <longman@redhat.com> Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24locktorture: Print ratio of acquisitions, not failuresPaul E. McKenney
commit 80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream. The __torture_print_stats() function in locktorture.c carefully initializes local variable "min" to statp[0].n_lock_acquired, but then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail field should normally be zero, and given the initialization, it seems reasonable to display the maximum and minimum number acquisitions instead of miscomputing the maximum and minimum number of failures. This commit therefore switches from failures to acquisitions. And this turns out to be not only a day-zero bug, but entirely my own fault. I hate it when that happens! Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon <will@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Will Deacon <will@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24tracing: Fix the race between registering 'snapshot' event trigger and ↵Xiao Yang
triggering 'snapshot' operation commit 0bbe7f719985efd9adb3454679ecef0984cb6800 upstream. Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24kmod: make request_module() return an error when autoloading is disabledEric Biggers
commit d7d27cfc5cf0766a26a8f56868c5ad5434735126 upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jessica Yu <jeyu@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24futex: futex_wake_op, do not fail on invalid opJiri Slaby
commit e78c38f6bdd900b2ad9ac9df8eff58b745dc5b3c upstream. In commit 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour"), I let FUTEX_WAKE_OP to fail on invalid op. Namely when op should be considered as shift and the shift is out of range (< 0 or > 31). But strace's test suite does this madness: futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced); futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff); When I pick the first 0xa0caffee, it decodes as: 0x80000000 & 0xa0caffee: oparg is shift 0x70000000 & 0xa0caffee: op is FUTEX_OP_OR 0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ 0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849 0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18 That means the op tries to do this: (futex |= (1 << (-849))) == -18 which is completely bogus. The new check of op in the code is: if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) { if (oparg < 0 || oparg > 31) return -EINVAL; oparg = 1 << oparg; } which results obviously in the "Invalid argument" errno: FAIL: futex =========== futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument futex.test: failed test: ../futex failed with code 1 So let us soften the failure to print only a (ratelimited) message, crop the value and continue as if it were right. When userspace keeps up, we can switch this to return -EINVAL again. [v2] Do not return 0 immediatelly, proceed with the cropped value. Fixes: 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24signal: Extend exec_id to 64bitsEric W. Biederman
commit d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream. Replace the 32bit exec_id with a 64bit exec_id to make it impossible to wrap the exec_id counter. With care an attacker can cause exec_id wrap and send arbitrary signals to a newly exec'd parent. This bypasses the signal sending checks if the parent changes their credentials during exec. The severity of this problem can been seen that in my limited testing of a 32bit exec_id it can take as little as 19s to exec 65536 times. Which means that it can take as little as 14 days to wrap a 32bit exec_id. Adam Zabrocki has succeeded wrapping the self_exe_id in 7 days. Even my slower timing is in the uptime of a typical server. Which means self_exec_id is simply a speed bump today, and if exec gets noticably faster self_exec_id won't even be a speed bump. Extending self_exec_id to 64bits introduces a problem on 32bit architectures where reading self_exec_id is no longer atomic and can take two read instructions. Which means that is is possible to hit a window where the read value of exec_id does not match the written value. So with very lucky timing after this change this still remains expoiltable. I have updated the update of exec_id on exec to use WRITE_ONCE and the read of exec_id in do_notify_parent to use READ_ONCE to make it clear that there is no locking between these two locations. Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl Fixes: 2.3.23pre2 Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()Boqun Feng
[ Upstream commit 25016bd7f4caf5fc983bbab7403d08e64cba3004 ] Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep triggered a warning: [ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) ... [ ] Call Trace: [ ] lock_is_held_type+0x5d/0x150 [ ] ? rcu_lockdep_current_cpu_online+0x64/0x80 [ ] rcu_read_lock_any_held+0xac/0x100 [ ] ? rcu_read_lock_held+0xc0/0xc0 [ ] ? __slab_free+0x421/0x540 [ ] ? kasan_kmalloc+0x9/0x10 [ ] ? __kmalloc_node+0x1d7/0x320 [ ] ? kvmalloc_node+0x6f/0x80 [ ] __bfs+0x28a/0x3c0 [ ] ? class_equal+0x30/0x30 [ ] lockdep_count_forward_deps+0x11a/0x1a0 The warning got triggered because lockdep_count_forward_deps() call __bfs() without current->lockdep_recursion being set, as a result a lockdep internal function (__bfs()) is checked by lockdep, which is unexpected, and the inconsistency between the irq-off state and the state traced by lockdep caused the warning. Apart from this warning, lockdep internal functions like __bfs() should always be protected by current->lockdep_recursion to avoid potential deadlocks and data inconsistency, therefore add the current->lockdep_recursion on-and-off section to protect __bfs() in both lockdep_count_forward_deps() and lockdep_count_backward_deps() Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-13padata: always acquire cpu_hotplug_lock before pinst->lockDaniel Jordan
commit 38228e8848cd7dd86ccb90406af32de0cad24be3 upstream. lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken: # echo 0 > /sys/devices/system/cpu/cpu1/online # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask ====================================================== WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted ------------------------------------------------------ bash/205 is trying to acquire lock: ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120 but task is already holding lock: ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120 which lock already depends on the new lock. padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority. Fixes: 6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus") Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02bpf: Explicitly memset the bpf_attr structureGreg Kroah-Hartman
commit 8096f229421f7b22433775e928d506f0342e5907 upstream. For the bpf syscall, we are relying on the compiler to properly zero out the bpf_attr union that we copy userspace data into. Unfortunately that doesn't always work properly, padding and other oddities might not be correctly zeroed, and in some tests odd things have been found when the stack is pre-initialized to other values. Fix this by explicitly memsetting the structure to 0 before using it. Reported-by: Maciej Żenczykowski <maze@google.com> Reported-by: John Stultz <john.stultz@linaro.org> Reported-by: Alexander Potapenko <glider@google.com> Reported-by: Alistair Delva <adelva@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://android-review.googlesource.com/c/kernel/common/+/1235490 Link: https://lore.kernel.org/bpf/20200320094813.GA421650@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02genirq: Fix reference leaks on irq affinity notifiersEdward Cree
commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream. The handling of notify->work did not properly maintain notify->kref in two cases: 1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one. 2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put. Fix both by checking the return values of the work handling functions (schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work. Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers") Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ben Hutchings <ben@decadent.org.uk> Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02futex: Unbreak futex hashingThomas Gleixner
commit 8d67743653dce5a0e7aa500fcccb237cde7ad88e upstream. The recent futex inode life time fix changed the ordering of the futex key union struct members, but forgot to adjust the hash function accordingly, As a result the hashing omits the leading 64bit and even hashes beyond the futex key causing a bad hash distribution which led to a ~100% performance regression. Hand in the futex key pointer instead of a random struct member and make the size calculation based of the struct offset. Fixes: 8019ad13ef7f ("futex: Fix inode life-time issue") Reported-by: Rong Chen <rong.a.chen@intel.com> Decoded-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rong Chen <rong.a.chen@intel.com> Link: https://lkml.kernel.org/r/87h7yy90ve.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02futex: Fix inode life-time issuePeter Zijlstra
commit 8019ad13ef7f64be44d4f892af9c840179009254 upstream. As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by: Jann Horn <jannh@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-02x86/mm: split vmalloc_sync_all()Joerg Roedel
commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream. Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20signal: avoid double atomic counter increments for user accountingLinus Torvalds
[ Upstream commit fda31c50292a5062332fa0343c084bd9f46604d9 ] When queueing a signal, we increment both the users count of pending signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount of the user struct itself (because we keep a reference to the user in the signal structure in order to correctly account for it when freeing). That turns out to be fairly expensive, because both of them are atomic updates, and particularly under extreme signal handling pressure on big machines, you can get a lot of cache contention on the user struct. That can then cause horrid cacheline ping-pong when you do these multiple accesses. So change the reference counting to only pin the user for the _first_ pending signal, and to unpin it when the last pending signal is dequeued. That means that when a user sees a lot of concurrent signal queuing - which is the only situation when this matters - the only atomic access needed is generally the 'sigpending' count update. This was noticed because of a particularly odd timing artifact on a dual-socket 96C/192T Cascade Lake platform: when you get into bad contention, on that machine for some reason seems to be much worse when the contention happens in the upper 32-byte half of the cacheline. As a result, the kernel test robot will-it-scale 'signal1' benchmark had an odd performance regression simply due to random alignment of the 'struct user_struct' (and pointed to a completely unrelated and apparently nonsensical commit for the regression). Avoiding the double increments (and decrements on the dequeueing side, of course) makes for much less contention and hugely improved performance on that will-it-scale microbenchmark. Quoting Feng Tang: "It makes a big difference, that the performance score is tripled! bump from original 17000 to 54000. Also the gap between 5.0-rc6 and 5.0-rc6+Jiri's patch is reduced to around 2%" [ The "2% gap" is the odd cacheline placement difference on that platform: under the extreme contention case, the effect of which half of the cacheline was hot was 5%, so with the reduced contention the odd timing artifact is reduced too ] It does help in the non-contended case too, but is not nearly as noticeable. Reported-and-tested-by: Feng Tang <feng.tang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Philip Li <philip.li@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-11audit: always check the netlink payload length in audit_receive_msg()Paul Moore
[ Upstream commit 756125289285f6e55a03861bf4b6257aa3d19a93 ] This patch ensures that we always check the netlink payload length in audit_receive_msg() before we take any action on the payload itself. Cc: stable@vger.kernel.org Reported-by: syzbot+399c44bf1f43b8747403@syzkaller.appspotmail.com Reported-by: syzbot+e4b12d8d202701f08b6d@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-11fs: prevent page refcount overflow in pipe_buf_getMatthew Wilcox
commit 15fab63e1e57be9fdb5eec1bbc5916e9825e9acb upstream. Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ 4.4.y backport notes: Regarding the change in generic_pipe_buf_get(), note that page_cache_get() is the same as get_page(). See mainline commit 09cbfeaf1a5a6 "mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros" for context. ] Signed-off-by: Ajay Kaher <akaher@vmware.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11audit: fix error handling in audit_data_to_entry()Paul Moore
commit 2ad3e17ebf94b7b7f3f64c050ff168f9915345eb upstream. Commit 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive") combined a number of separate fields in the audit_field struct into a single union. Generally this worked just fine because they are generally mutually exclusive. Unfortunately in audit_data_to_entry() the overlap can be a problem when a specific error case is triggered that causes the error path code to attempt to cleanup an audit_field struct and the cleanup involves attempting to free a stored LSM string (the lsm_str field). Currently the code always has a non-NULL value in the audit_field.lsm_str field as the top of the for-loop transfers a value into audit_field.val (both .lsm_str and .val are part of the same union); if audit_data_to_entry() fails and the audit_field struct is specified to contain a LSM string, but the audit_field.lsm_str has not yet been properly set, the error handling code will attempt to free the bogus audit_field.lsm_str value that was set with audit_field.val at the top of the for-loop. This patch corrects this by ensuring that the audit_field.val is only set when needed (it is cleared when the audit_field struct is allocated with kcalloc()). It also corrects a few other issues to ensure that in case of error the proper error code is returned. Cc: stable@vger.kernel.org Fixes: 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive") Reported-by: syzbot+1f4d90ead370d72e450b@syzkaller.appspotmail.com Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28trigger_next should increase position indexVasily Averin
[ Upstream commit 6722b23e7a2ace078344064a9735fb73e554e9ef ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s Notice the printing of "# Available triggers:..." after the line. With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s It only prints the end of the file, and does not restart. Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28tracing: Fix very unlikely race of registering two stat tracersSteven Rostedt (VMware)
[ Upstream commit dfb6cd1e654315168e36d947471bd2a0ccd834ae ] Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files). But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function. Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com Fixes: 002bb86d8d42f ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28padata: Remove broken queue flushingHerbert Xu
commit 07928d9bfc81640bab36f5190e8725894d93b659 upstream. The function padata_flush_queues is fundamentally broken because it cannot force padata users to complete the request that is underway. IOW padata has to passively wait for the completion of any outstanding work. As it stands flushing is used in two places. Its use in padata_stop is simply unnecessary because nothing depends on the queues to be flushed afterwards. The other use in padata_replace is more substantial as we depend on it to free the old pd structure. This patch instead uses the pd->refcnt to dynamically free the pd structure once all requests are complete. Fixes: 2b73b07ab8a4 ("padata: Flush the padata queues actively") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [dj: leave "pd->pinst = pinst" assignment in padata_alloc_pd()] Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14perf/core: Fix mlock accounting in perf_mmap()Song Liu
commit 003461559ef7a9bd0239bae35a22ad8924d6e9ad upstream. Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of a perf ring buffer may lead to an integer underflow in locked memory accounting. This may lead to the undesired behaviors, such as failures in BPF map creation. Address this by adjusting the accounting logic to take into account the possibility that the amount of already locked memory may exceed the current limit. Fixes: c4b75479741c ("perf/core: Make the mlock accounting simple again") Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lkml.kernel.org/r/20200123181146.2238074-1-songliubraving@fb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14clocksource: Prevent double add_timer_on() for watchdog_timerKonstantin Khlebnikov
commit febac332a819f0e764aa4da62757ba21d18c182b upstream. Kernel crashes inside QEMU/KVM are observed: kernel BUG at kernel/time/timer.c:1154! BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on(). At the same time another cpu got: general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in: __hlist_del at include/linux/list.h:681 (inlined by) detach_timer at kernel/time/timer.c:818 (inlined by) expire_timers at kernel/time/timer.c:1355 (inlined by) __run_timers at kernel/time/timer.c:1686 (inlined by) run_timer_softirq at kernel/time/timer.c:1699 Unfortunately kernel logs are badly scrambled, stacktraces are lost. Printing the timer->function before the BUG_ON() pointed to clocksource_watchdog(). The execution of clocksource_watchdog() can race with a sequence of clocksource_stop_watchdog() .. clocksource_start_watchdog(): expire_timers() detach_timer(timer, true); timer->entry.pprev = NULL; raw_spin_unlock_irq(&base->lock); call_timer_fn clocksource_watchdog() clocksource_watchdog_kthread() or clocksource_unbind() spin_lock_irqsave(&watchdog_lock, flags); clocksource_stop_watchdog(); del_timer(&watchdog_timer); watchdog_running = 0; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock_irqsave(&watchdog_lock, flags); clocksource_start_watchdog(); add_timer_on(&watchdog_timer, ...); watchdog_running = 1; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock(&watchdog_lock); add_timer_on(&watchdog_timer, ...); BUG_ON(timer_pending(timer) || !timer->function); timer_pending() -> true BUG() I.e. inside clocksource_watchdog() watchdog_timer could be already armed. Check timer_pending() before calling add_timer_on(). This is sufficient as all operations are synchronized by watchdog_lock. Fixes: 75c5158f70c0 ("timekeeping: Update clocksource with stop_machine") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29signal: Allow cifs and drbd to receive their terminating signalsEric W. Biederman
[ Upstream commit 33da8e7c814f77310250bb54a9db36a44c5de784 ] My recent to change to only use force_sig for a synchronous events wound up breaking signal reception cifs and drbd. I had overlooked the fact that by default kthreads start out with all signals set to SIG_IGN. So a change I thought was safe turned out to have made it impossible for those kernel thread to catch their signals. Reverting the work on force_sig is a bad idea because what the code was doing was very much a misuse of force_sig. As the way force_sig ultimately allowed the signal to happen was to change the signal handler to SIG_DFL. Which after the first signal will allow userspace to send signals to these kernel threads. At least for wake_ack_receiver in drbd that does not appear actively wrong. So correct this problem by adding allow_kernel_signal that will allow signals whose siginfo reports they were sent by the kernel through, but will not allow userspace generated signals, and update cifs and drbd to call allow_kernel_signal in an appropriate place so that their thread can receive this signal. Fixing things this way ensures that userspace won't be able to send signals and cause problems, that it is clear which signals the threads are expecting to receive, and it guarantees that nothing else in the system will be affected. This change was partly inspired by similar cifs and drbd patches that added allow_signal. Reported-by: ronnie sahlberg <ronniesahlberg@gmail.com> Reported-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Cc: Steve French <smfrench@gmail.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: David Laight <David.Laight@ACULAB.COM> Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes") Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig") Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29kdb: do a sanity check on the cpu in kdb_per_cpu()Dan Carpenter
[ Upstream commit b586627e10f57ee3aa8f0cfab0d6f7dc4ae63760 ] The "whichcpu" comes from argv[3]. The cpu_online() macro looks up the cpu in a bitmap of online cpus, but if the value is too high then it could read beyond the end of the bitmap and possibly Oops. Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-14tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not definedSteven Rostedt (VMware)
commit b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream. On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Cc: stable@vger.kernel.org Fixes: 4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-13 19:22:39 +0000