| Age | Commit message (Collapse) | Author |
|---|
|
Before using a task's util_avg signal in EAS, we need to ensure that
it has been synced up to the last_update_time of prev_cpu's root
cfs_rq.
We previously relied on the side effect of wake_cap to do that,
however that does not happen when the waking CPU has the same
capacity as the prev_cpu. Therefore just explicitly call
sync_entity_load_avg. This may result in calling that function twice
within the same select_task_rq_fair, but since last_update_time
hasn't changed the second call will bail out very quickly.
Change-Id: I91f1fcd71dfeb96b7f5b73418f1cf9ac311d4655
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
This reverts commit 83f462daa328f2f42c3c1f7f5277f71e3fa0f750.
Change-Id: I37ba36da61df2beb3a005557d9b673027f446916
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
|
|
If there have misfit task on one CPU, current code does not handle this
situation for nohz idle balance. As result, we can see the misfit task
stays run on little core for long time.
So this patch check if the CPU has misfit task or not. If has misfit
task then kick nohz idle balance so finally can execute active balance.
Change-Id: I117d3b7404296f8de11cb960a87a6b9a54a9f348
Signed-off-by: Leo Yan <leo.yan at linaro.org>
[taken from https://lists.linaro.org/pipermail/eas-dev/2016-September/000551.html]
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
Stale cpu utilization signals can cause havoc for energy-aware systems,
and they are caused by no updates being performed for cpus which have
no tick running. There is open debate about when is the correct time to
update these cpus, and general recognition that something needs to be
done.
This is an attempt to do something useful.
When we are looking for a task to pull for a newly-idle cpu, we have
an opportunity to update the stats for any cpu which has no tick running
without causing too much disturbance to the system or waking it up.
Change-Id: I0280104ea9c53e56c26f1c56a62bacab5d3e951b
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
|
|
Change-Id: I4c245ffacb207d7ea826c5763a426efe5399e0a2
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
|
|
The find_best_target() code has evolved over time to integrate different
micro-optimizations to the point to be quite difficult now to follow
exactly what it's doing.
This patch rafactors the existing code to make it more readable and easy
to maintain. It does that by properly identifying the three main
use-cases and addressing them in priority order:
A) latency sensitive tasks
B) non latency sensitive tasks on IDLE CPUs
C) non latency sensitive tasks on ACTIVE CPUs
The original behaviors are preserved. Some tests to compare
power/performances before and after this patch have been done using
Jankbench and YouTube and we did not noticed sensible differences.
The only difference with respect of the original code is a small update
to favor lower-capacity idle CPUs in case B. The same preference is not
enforce in case A since this can lead to a selection of a non-reserved
CPU for TOP_APP tasks, which ultimately can lead to non desirable
co-scheduling side-effects.
Change-Id: I871e5d95af89176217e4e239b64d44a420baabe8
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
(removed checkpatch whitespace error)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
|
|
This reverts commit 9d19f72b43f495f6f1ef1268dbed1bbade8dea24.
This fixes CVE-2017-0710.
SELinux allows more fine grained control: We grant processes that need
access to smaps CAP_SYS_PTRACE but prohibit them from using ptrace
attach().
Bug: 34951864
Bug: 36468447
Change-Id: I8ea67f8771ec212950bc251ee750bd8a7e7c0643
Signed-off-by: Daniel Mentz <danielmentz@google.com>
|
|
Changes in 4.4.78
net_sched: fix error recovery at qdisc creation
net: sched: Fix one possible panic when no destroy callback
net/phy: micrel: configure intterupts after autoneg workaround
ipv6: avoid unregistering inet6_dev for loopback
net: dp83640: Avoid NULL pointer dereference.
tcp: reset sk_rx_dst in tcp_disconnect()
net: prevent sign extension in dev_get_stats()
bpf: prevent leaking pointer via xadd on unpriviledged
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
ipv6: dad: don't remove dynamic addresses if link is down
net: ipv6: Compare lwstate in detecting duplicate nexthops
vrf: fix bug_on triggered by rx when destroying a vrf
rds: tcp: use sock_create_lite() to create the accept socket
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
cfg80211: Check if PMKID attribute is of expected size
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
parisc: use compat_sys_keyctl()
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
parisc/mm: Ensure IRQs are off in switch_mm()
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
kernel/extable.c: mark core_kernel_text notrace
mm/list_lru.c: fix list_lru_count_node() to be race free
fs/dcache.c: fix spin lockup issue on nlru->lock
checkpatch: silence perl 5.26.0 unescaped left brace warnings
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
arm: move ELF_ET_DYN_BASE to 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
s390: reduce ELF_ET_DYN_BASE
exec: Limit arg stack to at most 75% of _STK_LIM
vt: fix unchecked __put_user() in tioclinux ioctls
mnt: In umount propagation reparent in a separate pass
mnt: In propgate_umount handle visiting mounts in any order
mnt: Make propagate_umount less slow for overlapping mount propagation trees
selftests/capabilities: Fix the test_execve test
tpm: Get rid of chip->pdev
tpm: Provide strong locking for device removal
Add "shutdown" to "struct class".
tpm: Issue a TPM2_Shutdown for TPM2 devices.
mm: fix overflow check in expand_upwards()
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
crypto: atmel - only treat EBUSY as transient if backlog
crypto: sha1-ssse3 - Disable avx2
crypto: caam - fix signals handling
sched/topology: Fix overlapping sched_group_mask
sched/topology: Optimize build_group_mask()
PM / wakeirq: Convert to SRCU
PM / QoS: return -EINVAL for bogus strings
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
KVM: x86: disable MPX if host did not enable MPX XSAVE features
kvm: vmx: Do not disable intercepts for BNDCFGS
kvm: x86: Guest BNDCFGS requires guest MPX support
kvm: vmx: Check value written to IA32_BNDCFGS
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
Linux 4.4.78
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit c59f29cb144a6a0dfac16ede9dc8eafc02dc56ca upstream.
The 's' flag is supposed to indicate that a softirq is running. This
can be detected by testing the preempt_count with SOFTIRQ_OFFSET.
The current code tests the preempt_count with SOFTIRQ_MASK, which
would be true even when softirqs are disabled but not serving a
softirq.
Link: http://lkml.kernel.org/r/1481300417-3564-1-git-send-email-pkondeti@codeaurora.org
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f32d782e31bf079f600dcec126ed117b0577e85c upstream.
The group mask is always used in intersection with the group CPUs. So,
when building the group mask, we don't have to care about CPUs that are
not part of the group.
Signed-off-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lwang@redhat.com
Cc: riel@redhat.com
Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 73bb059f9b8a00c5e1bf2f7ca83138c05d05e600 upstream.
The point of sched_group_mask is to select those CPUs from
sched_group_cpus that can actually arrive at this balance domain.
The current code gets it wrong, as can be readily demonstrated with a
topology like:
node 0 1 2 3
0: 10 20 30 20
1: 20 10 20 30
2: 30 20 10 20
3: 20 30 20 10
Where (for example) domain 1 on CPU1 ends up with a mask that includes
CPU0:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
This causes sched_balance_cpu() to compute the wrong CPU and
consequently should_we_balance() will terminate early resulting in
missed load-balance opportunities.
The fixed topology looks like:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
(note: this relies on OVERLAP domains to always have children, this is
true because the regular topology domains are still here -- this is
before degenerate trimming)
Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: e3589f6c81e4 ("sched: Allow for overlapping sched_domain spans")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d80ddab89916273cb97114889d3f337bc370ae upstream.
core_kernel_text is used by MIPS in its function graph trace processing,
so having this method traced leads to an infinite set of recursive calls
such as:
Call Trace:
ftrace_return_to_handler+0x50/0x128
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
return_to_handler+0x10/0x30
return_to_handler+0x0/0x30
return_to_handler+0x0/0x30
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
core_kernel_text+0x10/0x1b8
ftrace_ops_no_ops+0x114/0x1bc
core_kernel_text+0x10/0x1b8
prepare_ftrace_return+0x6c/0x114
ftrace_graph_caller+0x20/0x44
(...)
Mark the function notrace to avoid it being traced.
Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.com
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6bdf6abc56b53103324dfd270a86580306e1a232 upstream.
Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.
Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sugov_update_commit() calls trace_cpu_frequency() to record the
current CPU frequency if it has not changed in the fast switch case
to prevent utilities from getting confused (they may report that the
CPU is idle if the frequency has not been recorded for too long, for
example).
However, that may cause the tracepoint to be triggered quite often
for no real reason (if the frequency doesn't change, we will not
modify the last update time stamp and governor computations may
run again shortly when that happens), so don't do that (arguably, it
is done to work around a utilities bug anyway).
That allows code duplication in sugov_update_commit() to be reduced
somewhat too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
(cherry picked from commit 38d4ea229d25d30be6bf41bcd6cd663a587866ca)
(conflicts with sugov_up_down_rate_limit resolved)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia019dda29b8c1c4cf3553da75c88d066eb5674e9
|
|
The way the schedutil governor uses the PELT metric causes it to
underestimate the CPU utilization in some cases.
That can be easily demonstrated by running kernel compilation on
a Sandy Bridge Intel processor, running turbostat in parallel with
it and looking at the values written to the MSR_IA32_PERF_CTL
register. Namely, the expected result would be that when all CPUs
were 100% busy, all of them would be requested to run in the maximum
P-state, but observation shows that this clearly isn't the case.
The CPUs run in the maximum P-state for a while and then are
requested to run slower and go back to the maximum P-state after
a while again. That causes the actual frequency of the processor to
visibly oscillate below the sustainable maximum in a jittery fashion
which clearly is not desirable.
That has been attributed to CPU utilization metric updates on task
migration that cause the total utilization value for the CPU to be
reduced by the utilization of the migrated task. If that happens,
the schedutil governor may see a CPU utilization reduction and will
attempt to reduce the CPU frequency accordingly right away. That
may be premature, though, for example if the system is generally
busy and there are other runnable tasks waiting to be run on that
CPU already.
This is unlikely to be an issue on systems where cpufreq policies are
shared between multiple CPUs, because in those cases the policy
utilization is computed as the maximum of the CPU utilization values
over the whole policy and if that turns out to be low, reducing the
frequency for the policy most likely is a good idea anyway. On
systems with one CPU per policy, however, it may affect performance
adversely and even lead to increased energy consumption in some cases.
On those systems it may be addressed by taking another utilization
metric into consideration, like whether or not the CPU whose
frequency is about to be reduced has been idle recently, because if
that's not the case, the CPU is likely to be busy in the near future
and its frequency should not be reduced.
To that end, use the counter of idle calls in the timekeeping code.
Namely, make the schedutil governor look at that counter for the
current CPU every time before its frequency is about to be reduced.
If the counter has not changed since the previous iteration of the
governor computations for that CPU, the CPU has been busy for all
that time and its frequency should not be decreased, so if the new
frequency would be lower than the one set previously, the governor
will skip the frequency update.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Joel Fernandes <joelaf@google.com>
(cherry picked from commit b7eaf1aab9f8bd2e49fceed77ebc66c1b5800718)
(simple CPUFREQ_RT_DL vs CPUFREQ_DL usage conflicts)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I531ec02c052944ee07a904dc2a25c59948ee762b
|
|
The loop in sugov_next_freq_shared() contains an if block to skip the
loop for the current CPU. This turns out to be an unnecessary
conditional in the scheduler's hot-path for every CPU in the policy.
It would be better to drop the conditional and make the loop treat all
the CPUs in the same way. That would eliminate the need of calling
sugov_iowait_boost() at the top of the routine.
To keep the code optimized to return early if the current CPU has RT/DL
flags set, move the flags check to sugov_update_shared() instead in
order to avoid the function call entirely.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit cba1dfb57b94c234728b689d9b00d4267fa1a879)
(modified for SCHED_CPUFREQ_DL vs SCHED_CPUFREQ_RT)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ie046fdc8eda46821356750edd0fb6f7d077af363
|
|
sugov_start()
sugov_start() only initializes struct sugov_cpu per-CPU structures
for shared policies, but it should do that for single-CPU policies too.
That in particular makes the IO-wait boost mechanism work in the
cases when cpufreq policies correspond to individual CPUs.
Fixes: 21ca6d2c52f8 (cpufreq: schedutil: Add iowait boosting)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
(cherry picked from commit 4296f23ed49a15d36949458adcc66ff993dee2a8)
(we use SCHED_CPUFREQ_DL instead of SCHED_CPUFREQ_RT in cpu->flags)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I5b837a0ee4432115d85caa1a9808ea61e1e1b07f
|
|
get_next_freq() uses sg_cpu only to get sg_policy, which the callers of
get_next_freq() already have. Pass sg_policy instead of sg_cpu to
get_next_freq(), to make it more efficient.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 655cb1ebff4b7918fc560502c3297af2d3c7d114)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia210058da32930a6cdb18258aa679cd1a44a747e
|
|
cached_raw_freq applies to the entire cpufreq policy and not individual
CPUs. Apart from wasting per-cpu memory, it is actually wrong to keep it
in struct sugov_cpu as we may end up comparing next_freq with a stale
cached_raw_freq of a random CPU.
Move cached_raw_freq to struct sugov_policy.
Fixes: 5cbea46984d6 (cpufreq: schedutil: map raw required frequency to driver frequency)
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry-picked from 6c4f0fa643cb9e775dcc976e3db00d649468ff1d)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ie91420f710819b383947f9031da9be1f3bb7f636
|
|
This patch rectifies a comment present in sugov_irq_work() function to
follow proper grammar.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d06e622d3d9206e6a2cc45a0f9a3256da8773ff4)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Iaf996445d411725639d511432cc424086892a146
|
|
Execute the irq-work specific initialization/exit code only when the
fast path isn't available.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 21ef57297b15a49b0c4dd4e7135c1a08e9a29a1c)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Icfd68f455ef71846d799fcd2d8ec6aa1bf59573e
|
|
The fast_switch_enabled flag will be used by both sugov_policy_alloc()
and sugov_policy_free() with a later patch.
Prepare for that by moving the calls to enable and disable it to the
beginning of sugov_init() and end of sugov_exit().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 4a71ce4348bb61740d411822357061f8bf870f4c)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ia174f423ca02d59360657ac2e77a5098ce5cf99c
|
|
Switch to the more common practice of writing labels.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 8e2ddb03643eb9d0bc4926946d7ce0d308eef0a5)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: Ida75c99cf3dff5cae24d3866454c83bcdb3385b9
|
|
Changes in 4.4.77
fs: add a VALID_OPEN_FLAGS
fs: completely ignore unknown open flags
driver core: platform: fix race condition with driver_override
bgmac: reset & enable Ethernet core before using it
mm: fix classzone_idx underflow in shrink_zones()
tracing/kprobes: Allow to create probe with a module name starting with a digit
drm/virtio: don't leak bo on drm_gem_object_init failure
usb: dwc3: replace %p with %pK
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Add USB quirk for HVR-950q to avoid intermittent device resets
usb: usbip: set buffer pointers to NULL after free
usb: Fix typo in the definition of Endpoint[out]Request
mac80211_hwsim: Replace bogus hrtimer clockid
sysctl: don't print negative flag for proc_douintvec
sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec
pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data
pinctrl: meson: meson8b: fix the NAND DQS pins
pinctrl: sunxi: Fix SPDIF function name for A83T
pinctrl: mxs: atomically switch mux and drive strength config
pinctrl: sh-pfc: Update info pointer after SoC-specific init
USB: serial: option: add two Longcheer device ids
USB: serial: qcserial: new Sierra Wireless EM7305 device ID
gfs2: Fix glock rhashtable rcu bug
x86/tools: Fix gcc-7 warning in relocs.c
x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings
ath10k: override CE5 config for QCA9377
KEYS: Fix an error code in request_master_key()
RDMA/uverbs: Check port number supplied by user verbs cmds
mqueue: fix a use-after-free in sys_mq_notify()
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf intel-pt: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf scripting perl: Fix compile error with some perl5 versions
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf tools: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf script: Use readdir() instead of deprecated readdir_r()
perf tools: Remove duplicate const qualifier
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf pmu: Fix misleadingly indented assignment (whitespace)
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf trace: Do not process PERF_RECORD_LOST twice
perf tests: Remove wrong semicolon in while loop in CQM test
perf tools: Use readdir() instead of deprecated readdir_r() again
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.4.77
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 425fffd886bae3d127a08fa6a17f2e31e24ed7ff upstream.
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5380e5644afbba9e3d229c36771134976f05c91e upstream.
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e52b32567126fe146f198971364f68d3bc5233f upstream.
Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.
This allows creating a probe such as:
p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0
Which is necessary for this command to work:
perf probe -m 8021q -a vlan_gro_receive
Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Due to rounding error hrtimer tick interval becomes 3333333 ns when HZ=300.
Consequently the tick time stamp nearest to the WALT's default window size
20ms will be also 19999998 (3333333 * 6).
Change-Id: I08f9bd2dbecccbb683e4490d06d8b0da703d3ab2
Suggested-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
|
|
Changes in 4.4.76
ipv6: release dst on error in ip6_dst_lookup_tail
net: don't call strlen on non-terminated string in dev_set_alias()
decnet: dn_rtmsg: Improve input length sanitization in dnrmg_receive_user_skb
net: Zero ifla_vf_info in rtnl_fill_vfinfo()
af_unix: Add sockaddr length checks before accessing sa_family in bind and connect handlers
Fix an intermittent pr_emerg warning about lo becoming free.
net: caif: Fix a sleep-in-atomic bug in cfpkt_create_pfx
igmp: acquire pmc lock for ip_mc_clear_src()
igmp: add a missing spin_lock_init()
ipv6: fix calling in6_ifa_hold incorrectly for dad work
net/mlx5: Wait for FW readiness before initializing command interface
decnet: always not take dst->__refcnt when inserting dst into hash table
net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
sfc: provide dummy definitions of vswitch functions
ipv6: Do not leak throw route references
rtnetlink: add IFLA_GROUP to ifla_policy
netfilter: xt_TCPMSS: add more sanity tests on tcph->doff
netfilter: synproxy: fix conntrackd interaction
NFSv4: fix a reference leak caused WARNING messages
drm/ast: Handle configuration without P2A bridge
mm, swap_cgroup: reschedule when neeed in swap_cgroup_swapoff()
MIPS: Avoid accidental raw backtrace
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: Fix IRQ tracing & lockdep when rescheduling
ALSA: hda - Fix endless loop of codec configure
ALSA: hda - set input_path bitmap to zero after moving it to new place
drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
usb: gadget: f_fs: Fix possibe deadlock
sysctl: enable strict writes
block: fix module reference leak on put_disk() call for cgroups throttle
mm: numa: avoid waiting on freed migrated pages
KVM: x86: fix fixing of hypercalls
scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type
scsi: lpfc: Set elsiocb contexts to NULL after freeing it
qla2xxx: Fix erroneous invalid handle message
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
net: mvneta: Fix for_each_present_cpu usage
MIPS: ath79: fix regression in PCI window initialization
net: korina: Fix NAPI versus resources freeing
MIPS: ralink: MT7688 pinmux fixes
MIPS: ralink: fix USB frequency scaling
MIPS: ralink: Fix invalid assignment of SoC type
MIPS: ralink: fix MT7628 pinmux typos
MIPS: ralink: fix MT7628 wled_an pinmux gpio
mtd: bcm47xxpart: limit scanned flash area on BCM47XX (MIPS) only
bgmac: fix a missing check for build_skb
mtd: bcm47xxpart: don't fail because of bit-flips
bgmac: Fix reversed test of build_skb() return value.
net: bgmac: Fix SOF bit checking
net: bgmac: Start transmit queue in bgmac_open
net: bgmac: Remove superflous netif_carrier_on()
powerpc/eeh: Enable IO path on permanent error
gianfar: Do not reuse pages from emergency reserve
Btrfs: fix truncate down when no_holes feature is enabled
virtio_console: fix a crash in config_work_handler
swiotlb-xen: update dev_addr after swapping pages
xen-netfront: Fix Rx stall during network stress and OOM
scsi: virtio_scsi: Reject commands when virtqueue is broken
platform/x86: ideapad-laptop: handle ACPI event 1
amd-xgbe: Check xgbe_init() return code
net: dsa: Check return value of phy_connect_direct()
drm/amdgpu: check ring being ready before using
vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
virtio_net: fix PAGE_SIZE > 64k
vxlan: do not age static remote mac entries
ibmveth: Add a proper check for the availability of the checksum features
kernel/panic.c: add missing \n
HID: i2c-hid: Add sleep between POWER ON and RESET
scsi: lpfc: avoid double free of resource identifiers
spi: davinci: use dma_mapping_error()
mac80211: initialize SMPS field in HT capabilities
x86/mpx: Use compatible types in comparison to fix sparse error
coredump: Ensure proper size of sparse core files
swiotlb: ensure that page-sized mappings are page-aligned
s390/ctl_reg: make __ctl_load a full memory barrier
be2net: fix status check in be_cmd_pmac_add()
perf probe: Fix to show correct locations for events on modules
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
sctp: check af before verify address in sctp_addr_id2transport
ravb: Fix use-after-free on `ifconfig eth0 down`
jump label: fix passing kbuild_cflags when checking for asm goto support
xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY
xfrm: NULL dereference on allocation failure
xfrm: Oops on error in pfkey_msg2xfrm_state()
watchdog: bcm281xx: Fix use of uninitialized spinlock.
sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
ARM: 8685/1: ensure memblock-limit is pmd-aligned
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
x86/mm: Fix flush_tlb_page() on Xen
ocfs2: o2hb: revert hb threshold to keep compatible
iommu/vt-d: Don't over-free page table directories
iommu: Handle default domain attach failure
iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
cpufreq: s3c2416: double free on driver init error path
KVM: x86: fix emulation of RSM and IRET instructions
KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()
KVM: x86: zero base3 of unusable segments
KVM: nVMX: Fix exception injection
Linux 4.4.76
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 6e5f32f7a43f45ee55c401c0b9585eb01f9629a8 upstream.
If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to
the pending sample window time on exit, setting the next update not
one window into the future, but two.
This situation on exiting NO_HZ is described by:
this_rq->calc_load_update < jiffies < calc_load_update
In this scenario, what we should be doing is:
this_rq->calc_load_update = calc_load_update [ next window ]
But what we actually do is:
this_rq->calc_load_update = calc_load_update + LOAD_FREQ [ next+1 window ]
This has the effect of delaying load average updates for potentially
up to ~9seconds.
This can result in huge spikes in the load average values due to
per-cpu uninterruptible task counts being out of sync when accumulated
across all CPUs.
It's safe to update the per-cpu active count if we wake between sample
windows because any load that we left in 'calc_load_idle' will have
been zero'd when the idle load was folded in calc_global_load().
This issue is easy to reproduce before,
commit 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")
just by forking short-lived process pipelines built from ps(1) and
grep(1) in a loop. I'm unable to reproduce the spikes after that
commit, but the bug still seems to be present from code review.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: commit 5167e8d ("sched/nohz: Rewrite and fix load-avg computation -- again")
Link: http://lkml.kernel.org/r/20170217120731.11868-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ff7a28a074ccbea999dadbb58c46212cf90984c6 ]
When a system panics, the "Rebooting in X seconds.." message is never
printed because it lacks a new line. Fix it.
Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 41662f5cc55335807d39404371cfcbb1909304c4 upstream.
SYSCTL_WRITES_WARN was added in commit f4aacea2f5d1 ("sysctl: allow for
strict write position handling"), and released in v3.16 in August of
2014. Since then I can find only 1 instance of non-zero offset
writing[1], and it was fixed immediately in CRIU[2]. As such, it
appears safe to flip this to the strict state now.
[1] https://www.google.com/search?q="when%20file%20position%20was%20not%200"
[2] http://lists.openvz.org/pipermail/criu/2015-April/019819.html
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.75
fs/exec.c: account for argv/envp pointers
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
lib/cmdline.c: fix get_options() overflow while parsing ranges
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
CIFS: Improve readdir verbosity
HID: Add quirk for Dell PIXART OEM mouse
signal: Only reschedule timers on signals timers have sent
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
time: Fix clock->read(clock) race around clocksource changes
target: Fix kref->refcount underflow in transport_cmd_finish_abort
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
drm/radeon: add a PX quirk for another K53TK variant
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: adjust default display clock
USB: usbip: fix nonconforming hub descriptor
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
mtd: spi-nor: fix spansion quad enable
powerpc/slb: Force a full SLB flush when we insert for a bad EA
usb: gadget: f_fs: avoid out of bounds access on comp_desc
net: phy: Initialize mdio clock at probe function
net: phy: fix marvell phy status reading
nvme/quirk: Add a delay before checking for adapter readiness
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Linux 4.4.75
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit ceea5e3771ed2378668455fa21861bead7504df5 upstream.
In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:
u64 clocksource_mmio_readl_down(struct clocksource *c)
{
return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}
This is called from the core timekeeping code via:
cycle_now = tkr->read(tkr->clock);
tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.
If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.
This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:
now = tk->clock->read(tk->clock);
Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.
Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57db7e4a2d92c2d3dfbca4ef8057849b2682436b upstream.
Thomas Gleixner wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
> The kernel prevents sending of siginfo with positive si_code, because
> these codes are reserved for kernel. I think we can allow a task to
> send such a siginfo to itself. This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
> id = timer_create(CLOCK_XXX, ..... signo = SIGX);
> timer_set(id, ....);
> info->si_signo = SIGX;
> info->si_code = SI_TIMER:
> info->_sifields._timer._tid = id;
> info->_sifields._timer._sys_private = 2;
> rt_[tg]sigqueueinfo(..., SIGX, info);
> sigemptyset(&sigset);
> sigaddset(&sigset, SIGX);
> rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
> info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
> do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.
This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.
The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.
Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.
Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers. This makes it clear why the code cares about preallocated
timers.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.74
configfs: Fix race between create_link and configfs_rmdir
can: gs_usb: fix memory leak in gs_cmd_reset()
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
vb2: Fix an off by one error in 'vb2_plane_vaddr'
mac80211: don't look at the PM bit of BAR frames
mac80211/wpa: use constant time memory comparison for MACs
mac80211: fix CSA in IBSS mode
mac80211: fix IBSS presp allocation size
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()
iio: proximity: as3935: recalibrate RCO after resume
USB: hub: fix SS max number of ports
usb: core: fix potential memory leak in error path during hcd creation
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
usb: r8a66597-hcd: select a different endpoint on timeout
usb: r8a66597-hcd: decrease timeout
drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR()
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
mm/memory-failure.c: use compound_head() flags for huge pages
swap: cond_resched in swap_cgroup_prepare()
genirq: Release resources in __setup_irq() error path
alarmtimer: Prevent overflow of relative timers
usb: dwc3: exynos fix axius clock error path to do cleanup
MIPS: Fix bnezc/jialc return address calculation
alarmtimer: Rate limit periodic intervals
mm: larger stack guard gap, between vmas
Allow stack to grow up to address space limit
mm: fix new crash in unmapped_area_topdown()
Linux 4.4.74
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit ff86bf0c65f14346bf2440534f9ba5ac232c39a0 upstream.
The alarmtimer code has another source of potentially rearming itself too
fast. Interval timers with a very samll interval have a similar CPU hog
effect as the previously fixed overflow issue.
The reason is that alarmtimers do not implement the normal protection
against this kind of problem which the other posix timer use:
timer expires -> queue signal -> deliver signal -> rearm timer
This scheme brings the rearming under scheduler control and prevents
permanently firing timers which hog the CPU.
Bringing this scheme to the alarm timer code is a major overhaul because it
lacks all the necessary mechanisms completely.
So for a quick fix limit the interval to one jiffie. This is not
problematic in practice as alarmtimers are usually backed by an RTC for
suspend which have 1 second resolution. It could be therefor argued that
the resolution of this clock should be set to 1 second in general, but
that's outside the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4781e76f90df7aec400635d73ea4c35ee1d4765 upstream.
Andrey reported a alartimer related RCU stall while fuzzing the kernel with
syzkaller.
The reason for this is an overflow in ktime_add() which brings the
resulting time into negative space and causes immediate expiry of the
timer. The following rearm with a small interval does not bring the timer
back into positive space due to the same issue.
This results in a permanent firing alarmtimer which hogs the CPU.
Use ktime_add_safe() instead which detects the overflow and clamps the
result to KTIME_SEC_MAX.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170530211655.802921648@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa07ab72cbb0d843429e61bf179308aed6cbe0dd upstream.
In case __irq_set_trigger() fails the resources requested via
irq_request_resources() are not released.
Add the missing release call into the error handling path.
Fixes: c1bacbae8192 ("genirq: Provide irq_request/release_resources chip callbacks")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/655538f5-cb20-a892-ff15-fbd2dd1fa4ec@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0d0e57697f162da4aa218b5feafe614fb666db07 ]
The patch fixes two things at once:
1) It checks the env->allow_ptr_leaks and only prints the map address to
the log if we have the privileges to do so, otherwise it just dumps 0
as we would when kptr_restrict is enabled on %pK. Given the latter is
off by default and not every distro sets it, I don't want to rely on
this, hence the 0 by default for unprivileged.
2) Printing of ldimm64 in the verifier log is currently broken in that
we don't print the full immediate, but only the 32 bit part of the
first insn part for ldimm64. Thus, fix this up as well; it's okay to
access, since we verified all ldimm64 earlier already (including just
constants) through replace_map_fd_with_map_ptr().
Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes: cbd357008604 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 62199770
Change-Id: I62ee47d06ddc669ba2863e8cf24f8f3e7683a461
|
|
Changes in 4.4.72
bnx2x: Fix Multi-Cos
ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
cxgb4: avoid enabling napi twice to the same queue
tcp: disallow cwnd undo when switching congestion control
vxlan: fix use-after-free on deletion
ipv6: Fix leak in ipv6_gso_segment().
net: ping: do not abuse udp_poll()
net: ethoc: enable NAPI before poll may be scheduled
net: bridge: start hello timer only if device is up
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
sparc: Machine description indices can vary
sparc64: reset mm cpumask after wrap
sparc64: combine activate_mm and switch_mm
sparc64: redefine first version
sparc64: add per-cpu mm of secondary contexts
sparc64: new context wrap
sparc64: delete old wrap code
arch/sparc: support NR_CPUS = 4096
serial: ifx6x60: fix use-after-free on module unload
ptrace: Properly initialize ptracer_cred on fork
KEYS: fix dereferencing NULL payload with nonzero length
KEYS: fix freeing uninitialized memory in key_update()
crypto: gcm - wait for crypto op not signal safe
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
nfsd4: fix null dereference on replay
nfsd: Fix up the "supattr_exclcreat" attributes
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
arm: KVM: Allow unaligned accesses at HYP
KVM: async_pf: avoid async pf injection when in guest mode
dmaengine: usb-dmac: Fix DMAOR AE bit definition
dmaengine: ep93xx: Always start from BASE0
xen/privcmd: Support correctly 64KB page granularity when mapping memory
xen-netfront: do not cast grant table reference to signed short
xen-netfront: cast grant table reference first to type int
ext4: fix SEEK_HOLE
ext4: keep existing extra fields when inode expands
ext4: fix fdatasync(2) after extent manipulation operations
usb: gadget: f_mass_storage: Serialize wake and sleep execution
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: chipidea: debug: check before accessing ci_role
staging/lustre/lov: remove set_fs() call from lov_getstripe()
iio: light: ltr501 Fix interchanged als/ps register field
iio: proximity: as3935: fix AS3935_INT mask
drivers: char: random: add get_random_long()
random: properly align get_random_int_hash
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
target: Re-add check to reject control WRITEs with overflow data
drm/msm: Expose our reservation object when exporting a dmabuf.
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
cpuset: consider dying css as offline
fs: add i_blocksize()
ufs: restore proper tail allocation
fix ufs_isblockset()
ufs: restore maintaining ->i_blocks
ufs: set correct ->s_maxsize
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
cxl: Fix error path on bad ioctl
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix memory leak in update_space_info failure path
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
scsi: qla2xxx: don't disable a not previously enabled PCI device
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
powerpc/numa: Fix percpu allocations to be NUMA aware
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
perf/core: Drop kernel samples even though :u is specified
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
drm/vmwgfx: Make sure backup_handle is always valid
drm/nouveau/tmr: fully separate alarm execution/pending lists
ALSA: timer: Fix race between read and ioctl
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ASoC: Fix use-after-free at card unregistration
drivers: char: mem: Fix wraparound check to allow mappings up to the end
tty: Drop krefs for interrupted tty lock
serial: sh-sci: Fix panic when serial console and DMA are enabled
net: better skb->sender_cpu and skb->napi_id cohabitation
mm: consider memblock reservations for deferred memory initialization sizing
NFS: Ensure we revalidate attributes before using execute_ok()
NFSv4: Don't perform cached access checks before we've OPENed the file
Make __xfs_xattr_put_listen preperly report errors.
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
arm64: entry: improve data abort handling of tagged pointers
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
usercopy: Adjust tests to deal with SMAP/PAN
arm64: armv8_deprecated: ensure extension of addr
arm64: ensure extension of smp_store_release value
Linux 4.4.72
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit cc1582c231ea041fbc68861dfaf957eaf902b829 upstream.
When doing sampling, for example:
perf record -e cycles:u ...
On workloads that do a lot of kernel entry/exits we see kernel
samples, even though :u is specified. This is due to skid existing.
This might be a security issue because it can leak kernel addresses even
though kernel sampling support is disabled.
The patch drops the kernel samples if exclude_kernel is specified.
For example, test on Haswell desktop:
perf record -e cycles:u <mgen>
perf report --stdio
Before patch applied:
99.77% mgen mgen [.] buf_read
0.20% mgen mgen [.] rand_buf_init
0.01% mgen [kernel.vmlinux] [k] apic_timer_interrupt
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen mgen [.] rand_array_init
0.00% mgen [kernel.vmlinux] [k] page_fault
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] __strcasestr
0.00% mgen ld-2.23.so [.] strcmp
0.00% mgen ld-2.23.so [.] _dl_start
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _start
We can see kernel symbols apic_timer_interrupt and page_fault.
After patch applied:
99.79% mgen mgen [.] buf_read
0.19% mgen mgen [.] rand_buf_init
0.00% mgen libc-2.23.so [.] __random_r
0.00% mgen mgen [.] rand_array_init
0.00% mgen mgen [.] last_free_elem
0.00% mgen libc-2.23.so [.] vfprintf
0.00% mgen libc-2.23.so [.] rand
0.00% mgen libc-2.23.so [.] __random
0.00% mgen libc-2.23.so [.] _int_malloc
0.00% mgen libc-2.23.so [.] _IO_doallocbuf
0.00% mgen ld-2.23.so [.] do_lookup_x
0.00% mgen ld-2.23.so [.] open_verify.constprop.7
0.00% mgen ld-2.23.so [.] _dl_important_hwcaps
0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4
0.00% mgen ld-2.23.so [.] _start
There are only userspace symbols.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Cc: mark.rutland@arm.com
Cc: will.deacon@arm.com
Cc: yao.jin@intel.com
Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 41c25707d21716826e3c1f60967f5550610ec1c9 upstream.
In most cases, a cgroup controller don't care about the liftimes of
cgroups. For the controller, a css becomes online when ->css_online()
is called on it and offline when ->css_offline() is called.
However, cpuset is special in that the user interface it exposes cares
whether certain cgroups exist or not. Combined with the RCU delay
between cgroup removal and css offlining, this can lead to user
visible behavior oddities where operations which should succeed after
cgroup removals fail for some time period. The effects of cgroup
removals are delayed when seen from userland.
This patch adds css_is_dying() which tests whether offline is pending
and updates is_cpuset_online() so that the function returns false also
while offline is pending. This gets rid of the userland visible
delays.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.com
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bits to 64 bits on 64-bit platforms
commit 5ea30e4e58040cfd6434c2f33dc3ea76e2c15b05 upstream.
The stack canary is an 'unsigned long' and should be fully initialized to
random data rather than only 32 bits of random data.
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-hardening@lists.openwall.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c70d9d809fdeecedb96972457ee45c49a232d97f upstream.
When I introduced ptracer_cred I failed to consider the weirdness of
fork where the task_struct copies the old value by default. This
winds up leaving ptracer_cred set even when a process forks and
the child process does not wind up being ptraced.
Because ptracer_cred is not set on non-ptraced processes whose
parents were ptraced this has broken the ability of the enlightenment
window manager to start setuid children.
Fix this by properly initializing ptracer_cred in ptrace_init_task
This must be done with a little bit of care to preserve the current value
of ptracer_cred when ptrace carries through fork. Re-reading the
ptracer_cred from the ptracing process at this point is inconsistent
with how PT_PTRACE_CAP has been maintained all of these years.
Tested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 64b875f7ac8a ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add appropriate #ifdef guards to ensure the smp-only easstats structs
are not used when smp is not enabled. Arnd got a report from buildbot,
analysed it, and pointed out exactly what the issue was.
Reported-by: "Arnd Bergmann" <arnd@arndb.de>
Suggested-by: "Arnd Bergmann" <arnd@arndb.de>
Fixes: 4b85765a3dd9 ("sched/fair: Add eas (& cas)
specific rq, sd and task stats")
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I60554dea20137f6774db3f59b4afd40a06554cfc
|
|
When EAS is enabled during boot, we have to be careful not to use
schedtune from fair.c before it is ready or it will warn us and we'll
get a traceback in the console.
Change-Id: I1a5cf29b18af626545c636c51219f9ed497c19fa
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
|
|
Change-Id: I686d26975f4a7dd830ff8441ff986e35461a7d55
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
|
|
Change-Id: I493b07360c46eee0b72c2a046dab9ec6cb3427ef
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
|
|
bug: 32668852
Change-Id: Ice96230d88939d5973b1b6310085d1b3df9c47d9
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
|
