| Age | Commit message (Collapse) | Author |
|---|
|
* refs/heads/tmp-5e24b4e
Linux 4.4.153
ovl: warn instead of error if d_type is not supported
ovl: Do d_type check only if work dir creation was successful
ovl: Ensure upper filesystem supports d_type
x86/mm: Fix use-after-free of ldt_struct
x86/mm/pat: Fix L1TF stable backport for CPA
ANDROID: x86_64_cuttlefish_defconfig: Enable lz4 compression for zram
UPSTREAM: drivers/block/zram/zram_drv.c: fix bug storing backing_dev
BACKPORT: zram: introduce zram memory tracking
BACKPORT: zram: record accessed second
BACKPORT: zram: mark incompressible page as ZRAM_HUGE
UPSTREAM: zram: correct flag name of ZRAM_ACCESS
UPSTREAM: zram: Delete gendisk before cleaning up the request queue
UPSTREAM: drivers/block/zram/zram_drv.c: make zram_page_end_io() static
BACKPORT: zram: set BDI_CAP_STABLE_WRITES once
UPSTREAM: zram: fix null dereference of handle
UPSTREAM: zram: add config and doc file for writeback feature
BACKPORT: zram: read page from backing device
BACKPORT: zram: write incompressible pages to backing device
BACKPORT: zram: identify asynchronous IO's return value
BACKPORT: zram: add free space management in backing device
UPSTREAM: zram: add interface to specif backing device
UPSTREAM: zram: rename zram_decompress_page to __zram_bvec_read
UPSTREAM: zram: inline zram_compress
UPSTREAM: zram: clean up duplicated codes in __zram_bvec_write
Linux 4.4.152
reiserfs: fix broken xattr handling (heap corruption, bad retval)
i2c: imx: Fix race condition in dma read
PCI: pciehp: Fix use-after-free on unplug
PCI: Skip MPS logic for Virtual Functions (VFs)
PCI: hotplug: Don't leak pci_slot on registration failure
parisc: Remove unnecessary barriers from spinlock.h
bridge: Propagate vlan add failure to user
packet: refine ring v3 block size test to hold one frame
netfilter: conntrack: dccp: treat SYNC/SYNCACK as invalid if no prior state
xfrm_user: prevent leaking 2 bytes of kernel memory
parisc: Remove ordered stores from syscall.S
ext4: fix spectre gadget in ext4_mb_regular_allocator()
KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
staging: android: ion: check for kref overflow
tcp: identify cryptic messages as TCP seq # bugs
net: qca_spi: Fix log level if probe fails
net: qca_spi: Make sure the QCA7000 reset is triggered
net: qca_spi: Avoid packet drop during initial sync
net: usb: rtl8150: demote allmulti message to dev_dbg()
net/ethernet/freescale/fman: fix cross-build error
drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()
tcp: remove DELAYED ACK events in DCTCP
qlogic: check kstrtoul() for errors
packet: reset network header if packet shorter than ll reserved space
ixgbe: Be more careful when modifying MAC filters
ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller
ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot
perf llvm-utils: Remove bashism from kernel include fetch script
bnxt_en: Fix for system hang if request_irq fails
drm/armada: fix colorkey mode property
ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problem
ieee802154: at86rf230: use __func__ macro for debug messages
ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problem
ARM: pxa: irq: fix handling of ICMR registers in suspend/resume
netfilter: x_tables: set module owner for icmp(6) matches
smsc75xx: Add workaround for gigabit link up hardware errata.
kasan: fix shadow_size calculation error in kasan_module_alloc
tracing: Use __printf markup to silence compiler
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
m68k: fix "bad page state" oops on ColdFire boot
bnx2x: Fix receiving tx-timeout in error or recovery state.
drm/exynos: decon5433: Fix WINCONx reset value
drm/exynos: decon5433: Fix per-plane global alpha for XRGB modes
drm/exynos: gsc: Fix support for NV16/61, YUV420/YVU420 and YUV422 modes
md/raid10: fix that replacement cannot complete recovery after reassemble
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
ARM: dts: da850: Fix interrups property for gpio
selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs
perf report powerpc: Fix crash if callchain is empty
perf test session topology: Fix test on s390
usb: xhci: increase CRS timeout value
ARM: dts: am437x: make edt-ft5x06 a wakeup source
brcmfmac: stop watchdog before detach and free everything
cxgb4: when disabling dcb set txq dcb priority to 0
Smack: Mark inode instant in smack_task_to_inode
ipv6: mcast: fix unsolicited report interval after receiving querys
locking/lockdep: Do not record IRQ state within lockdep code
net: davinci_emac: match the mdio device against its compatible if possible
ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP
net: propagate dev_get_valid_name return code
net: hamradio: use eth_broadcast_addr
enic: initialize enic->rfs_h.lock in enic_probe
qed: Add sanity check for SIMD fastpath handler.
arm64: make secondary_start_kernel() notrace
scsi: xen-scsifront: add error handling for xenbus_printf
usb: gadget: dwc2: fix memory leak in gadget_init()
usb: gadget: composite: fix delayed_status race condition when set_interface
usb: dwc2: fix isoc split in transfer with no data
ARM: dts: Cygnus: Fix I2C controller interrupt type
selftests: sync: add config fragment for testing sync framework
selftests: zram: return Kselftest Skip code for skipped tests
selftests: user: return Kselftest Skip code for skipped tests
selftests: static_keys: return Kselftest Skip code for skipped tests
selftests: pstore: return Kselftest Skip code for skipped tests
netfilter: ipv6: nf_defrag: reduce struct net memory waste
ARC: Explicitly add -mmedium-calls to CFLAGS
ANDROID: x86_64_cuttlefish_defconfig: Enable zram and zstd
BACKPORT: crypto: zstd - Add zstd support
UPSTREAM: zram: add zstd to the supported algorithms list
UPSTREAM: lib: Add zstd modules
UPSTREAM: lib: Add xxhash module
UPSTREAM: zram: rework copy of compressor name in comp_algorithm_store()
UPSTREAM: zram: constify attribute_group structures.
UPSTREAM: zram: count same page write as page_stored
UPSTREAM: zram: reduce load operation in page_same_filled
UPSTREAM: zram: use zram_free_page instead of open-coded
UPSTREAM: zram: introduce zram data accessor
UPSTREAM: zram: remove zram_meta structure
UPSTREAM: zram: use zram_slot_lock instead of raw bit_spin_lock op
BACKPORT: zram: partial IO refactoring
BACKPORT: zram: handle multiple pages attached bio's bvec
UPSTREAM: zram: fix operator precedence to get offset
BACKPORT: zram: extend zero pages to same element pages
BACKPORT: zram: remove waitqueue for IO done
UPSTREAM: zram: remove obsolete sysfs attrs
UPSTREAM: zram: support BDI_CAP_STABLE_WRITES
UPSTREAM: zram: revalidate disk under init_lock
BACKPORT: mm: support anonymous stable page
UPSTREAM: zram: use __GFP_MOVABLE for memory allocation
UPSTREAM: zram: drop gfp_t from zcomp_strm_alloc()
UPSTREAM: zram: add more compression algorithms
UPSTREAM: zram: delete custom lzo/lz4
UPSTREAM: zram: cosmetic: cleanup documentation
UPSTREAM: zram: use crypto api to check alg availability
BACKPORT: zram: switch to crypto compress API
UPSTREAM: zram: rename zstrm find-release functions
UPSTREAM: zram: introduce per-device debug_stat sysfs node
UPSTREAM: zram: remove max_comp_streams internals
UPSTREAM: zram: user per-cpu compression streams
BACKPORT: zsmalloc: require GFP in zs_malloc()
UPSTREAM: zram/zcomp: do not zero out zcomp private pages
UPSTREAM: zram: pass gfp from zcomp frontend to backend
UPSTREAM: socket: close race condition between sock_close() and sockfs_setattr()
ANDROID: Refresh x86_64_cuttlefish_defconfig
Linux 4.4.151
isdn: Disable IIOCDBGVAR
Bluetooth: avoid killing an already killed socket
x86/mm: Simplify p[g4um]d_page() macros
serial: 8250_dw: always set baud rate in dw8250_set_termios
ACPI / PM: save NVS memory for ASUS 1025C laptop
ACPI: save NVS memory for Lenovo G50-45
USB: option: add support for DW5821e
USB: serial: sierra: fix potential deadlock at close
ALSA: vxpocket: Fix invalid endian conversions
ALSA: memalloc: Don't exceed over the requested size
ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry
ALSA: cs5535audio: Fix invalid endian conversion
ALSA: virmidi: Fix too long output trigger loop
ALSA: vx222: Fix invalid endian conversions
ALSA: hda - Turn CX8200 into D3 as well upon reboot
ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs
net_sched: fix NULL pointer dereference when delete tcindex filter
vsock: split dwork to avoid reinitializations
net_sched: Fix missing res info when create new tc_index filter
llc: use refcount_inc_not_zero() for llc_sap_find()
l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache
dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
Conflicts:
drivers/block/zram/zram_drv.c
drivers/staging/android/ion/ion.c
include/linux/swap.h
mm/zsmalloc.c
Change-Id: I1c437ac5133503a939d06d51ec778b65371df6d1
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
|
|
Add zstd compression and decompression kernel modules.
zstd offers a wide varity of compression speed and quality trade-offs.
It can compress at speeds approaching lz4, and quality approaching lzma.
zstd decompressions at speeds more than twice as fast as zlib, and
decompression speed remains roughly the same across all compression levels.
The code was ported from the upstream zstd source repository. The
`linux/zstd.h` header was modified to match linux kernel style.
The cross-platform and allocation code was stripped out. Instead zstd
requires the caller to pass a preallocated workspace. The source files
were clang-formatted [1] to match the Linux Kernel style as much as
possible. Otherwise, the code was unmodified. We would like to avoid
as much further manual modification to the source code as possible, so it
will be easier to keep the kernel zstd up to date.
I benchmarked zstd compression as a special character device. I ran zstd
and zlib compression at several levels, as well as performing no
compression, which measure the time spent copying the data to kernel space.
Data is passed to the compresser 4096 B at a time. The benchmark file is
located in the upstream zstd source repository under
`contrib/linux-kernel/zstd_compress_test.c` [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is
211,988,480 B large. Run the following commands for the benchmark:
sudo modprobe zstd_compress_test
sudo mknod zstd_compress_test c 245 0
sudo cp silesia.tar zstd_compress_test
The time is reported by the time of the userland `cp`.
The MB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Adjusted MB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
The memory reported is the amount of memory the compressor requests.
| Method | Size (B) | Time (s) | Ratio | MB/s | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none | 11988480 | 0.100 | 1 | 2119.88 | - | - |
| zstd -1 | 73645762 | 1.044 | 2.878 | 203.05 | 224.56 | 1.23 |
| zstd -3 | 66988878 | 1.761 | 3.165 | 120.38 | 127.63 | 2.47 |
| zstd -5 | 65001259 | 2.563 | 3.261 | 82.71 | 86.07 | 2.86 |
| zstd -10 | 60165346 | 13.242 | 3.523 | 16.01 | 16.13 | 13.22 |
| zstd -15 | 58009756 | 47.601 | 3.654 | 4.45 | 4.46 | 21.61 |
| zstd -19 | 54014593 | 102.835 | 3.925 | 2.06 | 2.06 | 60.15 |
| zlib -1 | 77260026 | 2.895 | 2.744 | 73.23 | 75.85 | 0.27 |
| zlib -3 | 72972206 | 4.116 | 2.905 | 51.50 | 52.79 | 0.27 |
| zlib -6 | 68190360 | 9.633 | 3.109 | 22.01 | 22.24 | 0.27 |
| zlib -9 | 67613382 | 22.554 | 3.135 | 9.40 | 9.44 | 0.27 |
I benchmarked zstd decompression using the same method on the same machine.
The benchmark file is located in the upstream zstd repo under
`contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is
the amount of memory required to decompress data compressed with the given
compression level. If you know the maximum size of your input, you can
reduce the memory usage of decompression irrespective of the compression
level.
| Method | Time (s) | MB/s | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none | 0.025 | 8479.54 | - | - |
| zstd -1 | 0.358 | 592.15 | 636.60 | 0.84 |
| zstd -3 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -5 | 0.396 | 535.32 | 571.40 | 1.46 |
| zstd -10 | 0.374 | 566.81 | 607.42 | 2.51 |
| zstd -15 | 0.379 | 559.34 | 598.84 | 4.61 |
| zstd -19 | 0.412 | 514.54 | 547.77 | 8.80 |
| zlib -1 | 0.940 | 225.52 | 231.68 | 0.04 |
| zlib -3 | 0.883 | 240.08 | 247.07 | 0.04 |
| zlib -6 | 0.844 | 251.17 | 258.84 | 0.04 |
| zlib -9 | 0.837 | 253.27 | 287.64 | 0.04 |
Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/UserlandTest.cpp` [5] by mocking the kernel
functions. Fuzz tested using libfuzzer [6] with the fuzz harnesses under
`contrib/linux-kernel/test/{RoundTripCrash.c,DecompressCrash.c}` [7] [8]
with ASAN, UBSAN, and MSAN. Additionaly, it was tested while testing the
BtrFS and SquashFS patches coming next.
[1] https://clang.llvm.org/docs/ClangFormat.html
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_compress_test.c
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_decompress_test.c
[5] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/UserlandTest.cpp
[6] http://llvm.org/docs/LibFuzzer.html
[7] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/RoundTripCrash.c
[8] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/DecompressCrash.c
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
(cherry picked from commit 73f3d1b48f5069d46ba48aa28c2898dc93185560)
Signed-off-by: Peter Kalauskas <peskal@google.com>
Bug: 112488418
Change-Id: I47b9d43a8065b2b5a1362f8458065f0811cf70b9
|
|
Adds xxhash kernel module with xxh32 and xxh64 hashes. xxhash is an
extremely fast non-cryptographic hash algorithm for checksumming.
The zstd compression and decompression modules added in the next patch
require xxhash. I extracted it out from zstd since it is useful on its
own. I copied the code from the upstream XXHash source repository and
translated it into kernel style. I ran benchmarks and tests in the kernel
and tests in userland.
I benchmarked xxhash as a special character device. I ran in four modes,
no-op, xxh32, xxh64, and crc32. The no-op mode simply copies the data to
kernel space and ignores it. The xxh32, xxh64, and crc32 modes compute
hashes on the copied data. I also ran it with four different buffer sizes.
The benchmark file is located in the upstream zstd source repository under
`contrib/linux-kernel/xxhash_test.c` [1].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using the file `filesystem.squashfs`
from `ubuntu-16.10-desktop-amd64.iso`, which is 1,536,217,088 B large.
Run the following commands for the benchmark:
modprobe xxhash_test
mknod xxhash_test c 245 0
time cp filesystem.squashfs xxhash_test
The time is reported by the time of the userland `cp`.
The GB/s is computed with
1,536,217,008 B / time(buffer size, hash)
which includes the time to copy from userland.
The Normalized GB/s is computed with
1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).
| Buffer Size (B) | Hash | Time (s) | GB/s | Adjusted GB/s |
|-----------------|-------|----------|------|---------------|
| 1024 | none | 0.408 | 3.77 | - |
| 1024 | xxh32 | 0.649 | 2.37 | 6.37 |
| 1024 | xxh64 | 0.542 | 2.83 | 11.46 |
| 1024 | crc32 | 1.290 | 1.19 | 1.74 |
| 4096 | none | 0.380 | 4.04 | - |
| 4096 | xxh32 | 0.645 | 2.38 | 5.79 |
| 4096 | xxh64 | 0.500 | 3.07 | 12.80 |
| 4096 | crc32 | 1.168 | 1.32 | 1.95 |
| 8192 | none | 0.351 | 4.38 | - |
| 8192 | xxh32 | 0.614 | 2.50 | 5.84 |
| 8192 | xxh64 | 0.464 | 3.31 | 13.60 |
| 8192 | crc32 | 1.163 | 1.32 | 1.89 |
| 16384 | none | 0.346 | 4.43 | - |
| 16384 | xxh32 | 0.590 | 2.60 | 6.30 |
| 16384 | xxh64 | 0.466 | 3.30 | 12.80 |
| 16384 | crc32 | 1.183 | 1.30 | 1.84 |
Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/XXHashUserlandTest.cpp` [2] by mocking the
kernel functions. A line in each branch of every function in `xxhash.c`
was commented out to ensure that the test-suite fails. Additionally
tested while testing zstd and with SMHasher [3].
[1] https://phabricator.intern.facebook.com/P57526246
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/XXHashUserlandTest.cpp
[3] https://github.com/aappleby/smhasher
zstd source repository: https://github.com/facebook/zstd
XXHash source repository: https://github.com/cyan4973/xxhash
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
(cherry picked from commit 5d2405227a9eaea48e8cc95756a06d407b11f141)
Signed-off-by: Peter Kalauskas <peskal@google.com>
Bug: 112488418
Change-Id: I4b63e96457f17cf455591e8f35058dacd7aa9004
|
|
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot
will allow KASAN store allocation/deallocation stack traces for memory
chunks. The stack traces are stored in a hash table and referenced by
handles which reside in the kasan_alloc_meta and kasan_free_meta
structures in the allocated memory chunks.
IRQ stack traces are cut below the IRQ entry point to avoid unnecessary
duplication.
Right now stackdepot support is only enabled in SLAB allocator. Once
KASAN features in SLAB are on par with those in SLUB we can switch SLUB
to stackdepot as well, thus removing the dependency on SLUB stack
bookkeeping, which wastes a lot of memory.
This patch is based on the "mm: kasan: stack depots" patch originally
prepared by Dmitry Chernenkov.
Joonsoo has said that he plans to reuse the stackdepot code for the
mm/page_owner.c debugging facility.
[akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t]
[aryabinin@virtuozzo.com: comment style fixes]
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from cd11016e5f5212c13c0cec7384a525edc93b4921)
Change-Id: Ic804318410823b95d84e264a6334e018f21ef943
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot
will allow KASAN store allocation/deallocation stack traces for memory
chunks. The stack traces are stored in a hash table and referenced by
handles which reside in the kasan_alloc_meta and kasan_free_meta
structures in the allocated memory chunks.
IRQ stack traces are cut below the IRQ entry point to avoid unnecessary
duplication.
Right now stackdepot support is only enabled in SLAB allocator. Once
KASAN features in SLAB are on par with those in SLUB we can switch SLUB
to stackdepot as well, thus removing the dependency on SLUB stack
bookkeeping, which wastes a lot of memory.
This patch is based on the "mm: kasan: stack depots" patch originally
prepared by Dmitry Chernenkov.
Joonsoo has said that he plans to reuse the stackdepot code for the
mm/page_owner.c debugging facility.
Change-Id: I5c92d30b394de78d68443eb4dbf0cb45537049ce
[akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t]
[aryabinin@virtuozzo.com: comment style fixes]
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[guptap@codeaurora.org: keep only stackdepot changes removed kasan
stackdepot enablement changes, as not required.
Reduce STACK_HASH_ORDER to 18, this is to limit kernel static size]
Git-commit: cd11016e5f5212c13c0cec7384a525edc93b4921
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
|
|
* tmp-917a9:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linux 4.4.6
ld-version: Fix awk regex compile failure
target: Drop incorrect ABORT_TASK put for completed commands
block: don't optimize for non-cloned bio in bio_get_last_bvec()
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ovl: fix getcwd() failure after unsuccessful rmdir
ovl: copy new uid/gid into overlayfs runtime inode
userfaultfd: don't block on the last VM updates at exit time
powerpc/powernv: Fix OPAL_CONSOLE_FLUSH prototype and usages
powerpc/powernv: Add a kmsg_dumper that flushes console output on panic
powerpc: Fix dedotify for binutils >= 2.26
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Revert "drm/radeon: call hpd_irq_event on resume"
x86/mm: Fix slow_virt_to_phys() for X86_PAE again
gpu: ipu-v3: Do not bail out on missing optional port nodes
mac80211: Fix Public Action frame RX in AP mode
mac80211: check PN correctly for GCMP-encrypted fragmented MPDUs
mac80211: minstrel_ht: fix a logic error in RTS/CTS handling
mac80211: minstrel_ht: set default tx aggregation timeout to 0
mac80211: fix use of uninitialised values in RX aggregation
mac80211: minstrel: Change expected throughput unit back to Kbps
iwlwifi: mvm: inc pending frames counter also when txing non-sta
can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()
cfg80211/wext: fix message ordering
wext: fix message delay/ordering
ovl: fix working on distributed fs as lower layer
ovl: ignore lower entries when checking purity of non-directory entries
ASoC: wm8958: Fix enum ctl accesses in a wrong type
ASoC: wm8994: Fix enum ctl accesses in a wrong type
ASoC: samsung: Use IRQ safe spin lock calls
ASoC: dapm: Fix ctl value accesses in a wrong type
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
jffs2: reduce the breakage on recovery from halfway failed rename()
dmaengine: at_xdmac: fix residue computation
tracing: Fix check for cpu online when event is disabled
s390/dasd: fix diag 0x250 inline assembly
s390/mm: four page table levels vs. fork
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
KVM: VMX: disable PEBS before a guest entry
kvm: cap halt polling at exactly halt_poll_ns
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
arm64: account for sparsemem section alignment when choosing vmemmap offset
Linux 4.4.5
drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable
modules: fix longstanding /proc/kallsyms vs module insertion race.
drm/i915: refine qemu south bridge detection
drm/i915: more virtual south bridge detection
block: get the 1st and last bvec via helpers
block: check virt boundary in bio_will_gap()
drm/amdgpu: Use drm_calloc_large for VM page_tables array
thermal: cpu_cooling: fix out of bounds access in time_in_idle
i2c: brcmstb: allocate correct amount of memory for regmap
ubi: Fix out of bounds write in volume update code
cxl: Fix PSL timebase synchronization detection
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
MIPS: scache: Fix scache init with invalid line size.
USB: serial: option: add support for Quectel UC20
USB: serial: option: add support for Telit LE922 PID 0x1045
USB: qcserial: add Sierra Wireless EM74xx device ID
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
usb: chipidea: otg: change workqueue ci_otg as freezable
ALSA: timer: Fix broken compat timer user status ioctl
ALSA: hdspm: Fix zero-division
ALSA: hdsp: Fix wrong boolean ctl value accesses
ALSA: hdspm: Fix wrong boolean ctl value accesses
ALSA: seq: oss: Don't drain at closing a client
ALSA: pcm: Fix ioctls for X32 ABI
ALSA: timer: Fix ioctls for X32 ABI
ALSA: rawmidi: Fix ioctls X32 ABI
ALSA: hda - Fix mic issues on Acer Aspire E1-472
ALSA: ctl: Fix ioctls for X32 ABI
ALSA: usb-audio: Add a quirk for Plantronics DA45
adv7604: fix tx 5v detect regression
dmaengine: pxa_dma: fix cyclic transfers
Fix directory hardlinks from deleted directories
jffs2: Fix page lock / f->sem deadlock
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
Btrfs: fix loading of orphan roots leading to BUG_ON
pata-rb532-cf: get rid of the irq_to_gpio() call
tracing: Do not have 'comm' filter override event 'comm' field
ata: ahci: don't mark HotPlugCapable Ports as external/removable
PM / sleep / x86: Fix crash on graph trace through x86 suspend
arm64: vmemmap: use virtual projection of linear region
Adding Intel Lewisburg device IDs for SATA
writeback: flush inode cgroup wb switches instead of pinning super_block
block: bio: introduce helpers to get the 1st and last bvec
libata: Align ata_device's id on a cacheline
libata: fix HDIO_GET_32BIT ioctl
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amdgpu/pm: update current crtc info after setting the powerstate
drm/radeon/pm: update current crtc info after setting the powerstate
drm/ast: Fix incorrect register check for DRAM width
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
iommu/amd: Apply workaround for ATS write permission check
arm/arm64: KVM: Fix ioctl error handling
KVM: x86: fix root cause for missed hardware breakpoints
vfio: fix ioctl error handling
Fix cifs_uniqueid_to_ino_t() function for s390x
CIFS: Fix SMB2+ interim response processing for read requests
cifs: fix out-of-bounds access in lease parsing
fbcon: set a default value to blink interval
kvm: x86: Update tsc multiplier on change.
mips/kvm: fix ioctl error handling
parisc: Fix ptrace syscall number and return value modification
PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer
block: Initialize max_dev_sectors to 0
drm/amdgpu: mask out WC from BO on unsupported arches
btrfs: async-thread: Fix a use-after-free error for trace
btrfs: Fix no_space in write and rm loop
Btrfs: fix deadlock running delayed iputs at transaction commit time
drivers: sh: Restore legacy clock domain on SuperH platforms
use ->d_seq to get coherency between ->d_inode and ->d_flags
Linux 4.4.4
iwlwifi: mvm: don't allow sched scans without matches to be started
iwlwifi: update and fix 7265 series PCI IDs
iwlwifi: pcie: properly configure the debug buffer size for 8000
iwlwifi: dvm: fix WoWLAN
security: let security modules use PTRACE_MODE_* with bitmasks
IB/cma: Fix RDMA port validation for iWarp
x86/irq: Plug vector cleanup race
x86/irq: Call irq_force_move_complete with irq descriptor
x86/irq: Remove outgoing CPU from vector cleanup mask
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
x86/irq: Clear move_in_progress before sending cleanup IPI
x86/irq: Remove offline cpus from vector cleanup
x86/irq: Get rid of code duplication
x86/irq: Copy vectormask instead of an AND operation
x86/irq: Check vector allocation early
x86/irq: Reorganize the search in assign_irq_vector
x86/irq: Reorganize the return path in assign_irq_vector
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
x86/irq: Validate that irq descriptor is still active
x86/irq: Fix a race in x86_vector_free_irqs()
x86/irq: Call chip->irq_set_affinity in proper context
x86/entry/compat: Add missing CLAC to entry_INT80_32
x86/mpx: Fix off-by-one comparison with nr_registers
hpfs: don't truncate the file when delete fails
do_last(): ELOOP failure exit should be done after leaving RCU mode
should_follow_link(): validate ->d_seq after having decided to follow
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
xen/scsiback: correct frontend counting
xen/arm: correctly handle DMA mapping of compound pages
ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
do_last(): don't let a bogus return value from ->open() et.al. to confuse us
kernel/resource.c: fix muxed resource handling in __request_region()
sunrpc/cache: fix off-by-one in qword_get()
tracing: Fix showing function event in available_events
powerpc/eeh: Fix partial hotplug criterion
KVM: x86: MMU: fix ubsan index-out-of-range warning
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
KVM: async_pf: do not warn on page allocation failures
of/irq: Fix msi-map calculation for nonzero rid-base
NFSv4: Fix a dentry leak on alias use
nfs: fix nfs_size_to_loff_t
block: fix use-after-free in dio_bio_complete
bio: return EINTR if copying to user space got interrupted
i2c: i801: Adding Intel Lewisburg support for iTCO
phy: core: fix wrong err handle for phy_power_on
writeback: keep superblock pinned during cgroup writeback association switches
cgroup: make sure a parent css isn't offlined before its children
cpuset: make mm migration asynchronous
PCI/AER: Flush workqueue on device remove to avoid use-after-free
ARCv2: SMP: Emulate IPI to self using software triggered interrupt
ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
libata: fix sff host state machine locking while polling
qla2xxx: Fix stale pointer access.
spi: atmel: fix gpio chip-select in case of non-DT platform
target: Fix race with SCF_SEND_DELAYED_TAS handling
target: Fix remote-port TMR ABORT + se_cmd fabric stop
target: Fix TAS handling for multi-session se_node_acls
target: Fix LUN_RESET active TMR descriptor handling
target: Fix LUN_RESET active I/O handling for ACK_KREF
ALSA: hda - Fixing background noise on Dell Inspiron 3162
ALSA: hda - Apply clock gate workaround to Skylake, too
Revert "workqueue: make sure delayed work run in local cpu"
workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
mac80211: Requeue work after scan complete for all VIF types.
rfkill: fix rfkill_fop_read wait_event usage
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
perf stat: Do not clean event's private stats
cdc-acm:exclude Samsung phone 04e8:685d
Revert "Staging: panel: usleep_range is preferred over udelay"
Staging: speakup: Fix getting port information
sd: Optimal I/O size is in bytes, not sectors
libceph: don't spam dmesg with stray reply warnings
libceph: use the right footer size when skipping a message
libceph: don't bail early from try_read() when skipping a message
libceph: fix ceph_msg_revoke()
seccomp: always propagate NO_NEW_PRIVS on tsync
cpufreq: Fix NULL reference crash while accessing policy->governor_data
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
hwmon: (ads1015) Handle negative conversion values correctly
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
Thermal: do thermal zone update after a cooling device registered
Thermal: handle thermal zone device properly during system sleep
Thermal: initialize thermal zone device correctly
IB/mlx5: Expose correct maximum number of CQE capacity
IB/qib: Support creating qps with GFP_NOIO flag
IB/qib: fix mcast detach when qp not attached
IB/cm: Fix a recently introduced deadlock
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: at_xdmac: fix resume for cyclic transfers
dmaengine: dw: fix cyclic transfer callbacks
dmaengine: dw: fix cyclic transfer setup
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
lib: sw842: select crc32
uapi: update install list after nvme.h rename
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
toshiba_acpi: Fix blank screen at boot if transflective backlight is supported
make sure that freeing shmem fast symlinks is RCU-delayed
drm/radeon/pm: adjust display configuration after powerstate
drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4
drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2)
drm: No-Op redundant calls to drm_vblank_off() (v2)
drm/radeon: use post-decrement in error handling
drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command
drm/i915: fix error path in intel_setup_gmbus()
drm/i915/dsi: don't pass arbitrary data to sideband
drm/i915/dsi: defend gpio table against out of bounds access
drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
drm/i915: Make sure DC writes are coherent on flush.
drm/i915: Init power domains early in driver load
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
drm/i915: Restore inhibiting the load of the default context
drm: fix missing reference counting decrease
drm/radeon: hold reference to fences in radeon_sa_bo_new
drm/radeon: mask out WC from BO on unsupported arches
drm: add helper to check for wc memory support
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
drm/radeon: Add a common function for DFS handling
drm/radeon: cleaned up VCO output settings for DP audio
drm/radeon: properly byte swap vce firmware setup
drm/radeon: clean up fujitsu quirks
drm/radeon: Fix "slow" audio over DP on DCE8+
drm/radeon: call hpd_irq_event on resume
drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr
drm/dp/mst: deallocate payload on port destruction
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
drm/dp/mst: move GUID storage from mgr, port to only mst branch
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
drm/dp/mst: fix in RAD element access
drm/dp/mst: fix in MSTB RAD initialization
drm/dp/mst: always send reply for UP request
drm/dp/mst: process broadcast messages correctly
drm/nouveau: platform: Fix deferred probe
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
drm/nouveau/display: Enable vblank irqs after display engine is on again.
drm/nouveau/kms: take mode_config mutex in connector hotplug path
drm/amdgpu/pm: adjust display configuration after powerstate
drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
drm/amdgpu: use post-decrement in error handling
drm/amdgpu: fix issue with overlapping userptrs
drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
drm/amdgpu: remove unnecessary forward declaration
drm/amdgpu: fix s4 resume
drm/amdgpu: remove exp hardware support from iceland
drm/amdgpu: don't load MEC2 on topaz
drm/amdgpu: drop topaz support from gmc8 module
drm/amdgpu: pull topaz gmc bits into gmc_v7
drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
drm/amdgpu: iceland use CI based MC IP
drm/amdgpu: move gmc7 support out of CIK dependency
drm/amdgpu: no need to load MC firmware on fiji
drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
drm/amdgpu: fix tonga smu resume
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amdgpu: call hpd_irq_event on resume
drm/amdgpu: Fix off-by-one errors in amdgpu_vm_bo_map
drm/vmwgfx: respect 'nomodeset'
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
virtio_pci: fix use after free on release
virtio_balloon: fix race between migration and ballooning
virtio_balloon: fix race by fill and leak
regulator: mt6311: MT6311_REGULATOR needs to select REGMAP_I2C
regulator: axp20x: Fix GPIO LDO enable value for AXP22x
clk: exynos: use irqsave version of spin_lock to avoid deadlock with irqs
cxl: use correct operator when writing pcie config space values
sparc64: fix incorrect sign extension in sys_sparc64_personality
EDAC, mc_sysfs: Fix freeing bus' name
EDAC: Robustify workqueues destruction
MIPS: Fix buffer overflow in syscall_get_arguments()
MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefs
MIPS: hpet: Choose a safe value for the ETIME check
MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handler
Revert "MIPS: Fix PAGE_MASK definition"
cputime: Prevent 32bit overflow in time[val|spec]_to_cputime()
time: Avoid signed overflow in timekeeping_get_ns()
Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets
Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences
Bluetooth: Fix incorrect removing of IRKs
Bluetooth: Add support of Toshiba Broadcom based devices
Bluetooth: Use continuous scanning when creating LE connections
Drivers: hv: vmbus: Fix a Host signaling bug
tools: hv: vss: fix the write()'s argument: error -> vss_msg
mmc: sdhci: Allow override of get_cd() called from sdhci_request()
mmc: sdhci: Allow override of mmc host operations
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
mmc: pxamci: fix again read-only gpio detection polarity
mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
mmc: mmci: fix an ages old detection error
mmc: core: Enable tuning according to the actual timing
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
mmc: sdio: Fix invalid vdd in voltage switch power cycle
mmc: sdhci: Fix DMA descriptor with zero data length
mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT
mmc: usdhi6rol0: handle NULL data in timeout
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
posix-clock: Fix return code on the poll method's error path
irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1
irqchip/atmel-aic: Fix wrong bit operation for IRQ priority
irqchip/mxs: Add missing set_handle_irq()
irqchip/omap-intc: Add support for spurious irq handling
coresight: checking for NULL string in coresight_name_match()
dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq paths
dm snapshot: fix hung bios when copy error occurs
dm space map metadata: remove unused variable in brb_pop()
tda1004x: only update the frontend properties if locked
vb2: fix a regression in poll() behavior for output,streams
gspca: ov534/topro: prevent a division by 0
si2157: return -EINVAL if firmware blob is too big
media: dvb-core: Don't force CAN_INVERSION_AUTO in oneshot mode
rc: sunxi-cir: Initialize the spinlock properly
namei: ->d_inode of a pinned dentry is stable only for positives
mei: validate request value in client notify request ioctl
mei: fix fasync return value on error
rtlwifi: rtl8723be: Fix module parameter initialization
rtlwifi: rtl8188ee: Fix module parameter initialization
rtlwifi: rtl8192se: Fix module parameter initialization
rtlwifi: rtl8723ae: Fix initialization of module parameters
rtlwifi: rtl8192de: Fix incorrect module parameter descriptions
rtlwifi: rtl8192ce: Fix handling of module parameters
rtlwifi: rtl8192cu: Add missing parameter setup
rtlwifi: rtl_pci: Fix kernel panic
locks: fix unlock when fcntl_setlk races with a close
um: link with -lpthread
uml: fix hostfs mknod()
uml: flush stdout before forking
s390/fpu: signals vs. floating point control register
s390/compat: correct restore of high gprs on signal return
s390/dasd: fix performance drop
s390/dasd: fix refcount for PAV reassignment
s390/dasd: prevent incorrect length error under z/VM after PAV changes
s390: fix normalization bug in exception table sorting
btrfs: initialize the seq counter in struct btrfs_device
Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
Btrfs: fix transaction handle leak on failure to create hard link
Btrfs: fix number of transaction units required to create symlink
Btrfs: send, don't BUG_ON() when an empty symlink is found
btrfs: statfs: report zero available if metadata are exhausted
Btrfs: igrab inode in writepage
Btrfs: add missing brelse when superblock checksum fails
KVM: s390: fix memory overwrites when vx is disabled
s390/kvm: remove dependency on struct save_area definition
clocksource/drivers/vt8500: Increase the minimum delta
genirq: Validate action before dereferencing it in handle_irq_event_percpu()
mm: numa: quickly fail allocations for NUMA balancing on full nodes
mm: thp: fix SMP race condition between THP page fault and MADV_DONTNEED
ocfs2: unlock inode if deleting inode from orphan fails
drm/i915: shut up gen8+ SDE irq dmesg noise
iw_cxgb3: Fix incorrectly returning error on success
spi: omap2-mcspi: Prevent duplicate gpio_request
drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
USB: option: add "4G LTE usb-modem U901"
USB: option: add support for SIM7100E
USB: cp210x: add IDs for GE B650V3 and B850V3 boards
usb: dwc3: Fix assignment of EP transfer resources
can: ems_usb: Fix possible tx overflow
dm thin: fix race condition when destroying thin pool workqueue
bcache: Change refill_dirty() to always scan entire disk if necessary
bcache: prevent crash on changing writeback_running
bcache: allows use of register in udev to avoid "device_busy" error.
bcache: unregister reboot notifier if bcache fails to unregister device
bcache: fix a leak in bch_cached_dev_run()
bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device
bcache: Add a cond_resched() call to gc
bcache: fix a livelock when we cause a huge number of cache misses
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
ARM: 8457/1: psci-smp is built only for SMP
drm/gma500: Use correct unref in the gem bo create function
devm_memremap: Fix error value when memremap failed
KVM: s390: fix guest fprs memory leak
arm64: errata: Add -mpc-relative-literal-loads to build flags
ARM: debug-ll: fix BCM63xx entry for multiplatform
ext4: fix bh->b_state corruption
sctp: Fix port hash table size computation
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
tipc: unlock in error path
rtnl: RTM_GETNETCONF: fix wrong return value
IFF_NO_QUEUE: Fix for drivers not calling ether_setup()
tcp/dccp: fix another race at listener dismantle
route: check and remove route cache when we get route
net_sched fix: reclassification needs to consider ether protocol changes
pppoe: fix reference counting in PPPoE proxy
l2tp: Fix error creating L2TP tunnels
net/mlx4_en: Avoid changing dev->features directly in run-time
net/mlx4_en: Choose time-stamping shift value according to HW frequency
net/mlx4_en: Count HW buffer overrun only once
qmi_wwan: add "4G LTE usb-modem U901"
tcp: md5: release request socket instead of listener
tipc: fix premature addition of node to lookup table
af_unix: Guard against other == sk in unix_dgram_sendmsg
af_unix: Don't set err in unix_stream_read_generic unless there was an error
ipv4: fix memory leaks in ip_cmsg_send() callers
bonding: Fix ARP monitor validation
bpf: fix branch offset adjustment on backjumps after patching ctx expansion
flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
net: Copy inner L3 and L4 headers as unaligned on GRE TEB
sctp: translate network order to host order when users get a hmacid
enic: increment devcmd2 result ring in case of timeout
tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
net:Add sysctl_max_skb_frags
tcp: do not drop syn_recv on all icmp reports
unix: correctly track in-flight fds in sending process user_struct
ipv6: fix a lockdep splat
ipv6: addrconf: Fix recursive spin lock call
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
tcp: beware of alignments in tcp_get_info()
switchdev: Require RTNL mutex to be held when sending FDB notifications
inet: frag: Always orphan skbs inside ip_defrag()
tipc: fix connection abort during subscription cancel
net: dsa: fix mv88e6xxx switches
sctp: allow setting SCTP_SACK_IMMEDIATELY by the application
pptp: fix illegal memory access caused by multiple bind()s
af_unix: fix struct pid memory leak
tcp: fix NULL deref in tcp_v4_send_ack()
lwt: fix rx checksum setting for lwt devices tunneling over ipv6
tunnels: Allow IPv6 UDP checksums to be correctly controlled.
net: dp83640: Fix tx timestamp overflow handling.
gro: Make GRO aware of lightweight tunnels.
af_iucv: Validate socket address length in iucv_sock_bind()
Conflicts:
arch/arm64/Makefile
arch/arm64/include/asm/cacheflush.h
drivers/mmc/host/sdhci.c
drivers/usb/dwc3/ep0.c
drivers/usb/dwc3/gadget.c
kernel/module.c
sound/core/pcm_compat.c
CRs-Fixed: 1010239
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Change-Id: I41a28636fc9ad91f9d979b191784609476294cdf
|
|
This snapshot is taken as of msm-3.18 commit e70ad0cd (Promotion of
kernel.lnx.3.18-151201.)
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
|
|
commit 5b57167749274961baf15ed1f05a4996b3ab0487 upstream.
The sw842 library code was merged in linux-4.1 and causes a very rare randconfig
failure when CONFIG_CRC32 is not set:
lib/built-in.o: In function `sw842_compress':
oid_registry.c:(.text+0x12ddc): undefined reference to `crc32_be'
lib/built-in.o: In function `sw842_decompress':
oid_registry.c:(.text+0x137e4): undefined reference to `crc32_be'
This adds an explict 'select CRC32' statement, similar to what the other users
of the crc32 code have. In practice, CRC32 is always enabled anyway because
over 100 other symbols select it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2da572c959dd ("lib: add software 842 compression/decompression")
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lib/built-in.o: In function `__bitrev32':
deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table'
Anything which uses bitrevX() has to select BITREVERSE, to grab
lib/bitrev.o.
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
|
|
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
|
|
This should result in a pretty sizeable performance gain for reads. For
rough comparison I did some simple read testing using PMEM to compare
reads of write combining (WC) mappings vs write-back (WB). This was
done on a random lab machine.
PMEM reads from a write combining mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s
PMEM reads from a write-back mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000
1000000+0 records in
1000000+0 records out
4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s
To be able to safely support a write-back aperture I needed to add
support for the "read flush" _DSM flag, as outlined in the DSM spec:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
This flag tells the ND BLK driver that it needs to flush the cache lines
associated with the aperture after the aperture is moved but before any
new data is read. This ensures that any stale cache lines from the
previous contents of the aperture will be discarded from the processor
cache, and the new data will be read properly from the DIMM. We know
that the cache lines are clean and will be discarded without any
writeback because either a) the previous aperture operation was a read,
and we never modified the contents of the aperture, or b) the previous
aperture operation was a write and we must have written back the dirtied
contents of the aperture to the DIMM before the I/O was completed.
In order to add support for the "read flush" flag I needed to add a
generic routine to invalidate cache lines, mmio_flush_range(). This is
protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently
only supported on x86.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Sometimes a scatter-gather has to be split into several chunks, or sub
scatter lists. This happens for example if a scatter list will be
handled by multiple DMA channels, each one filling a part of it.
A concrete example comes with the media V4L2 API, where the scatter list
is allocated from userspace to hold an image, regardless of the
knowledge of how many DMAs will fill it :
- in a simple RGB565 case, one DMA will pump data from the camera ISP
to memory
- in the trickier YUV422 case, 3 DMAs will pump data from the camera
ISP pipes, one for pipe Y, one for pipe U and one for pipe V
For these cases, it is necessary to split the original scatter list into
multiple scatter lists, which is the purpose of this patch.
The guarantees that are required for this patch are :
- the intersection of spans of any couple of resulting scatter lists is
empty.
- the union of spans of all resulting scatter lists is a subrange of
the span of the original scatter list.
- streaming DMA API operations (mapping, unmapping) should not happen
both on both the resulting and the original scatter list. It's either
the first or the later ones.
- the caller is reponsible to call kfree() on the resulting
scatterlists.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Since all users are now converted to the inline implementation,
remove the out-of-line implementation entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional
user of percpu_rw_semaphore.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm subsystem from Dan Williams:
"The libnvdimm sub-system introduces, in addition to the
libnvdimm-core, 4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory
devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
Interface table).
After registering NVDIMMs the NFIT driver then registers "region"
devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block
device (disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of
persistent memory address ranges is re-worked to drive
PMEM-namespaces emitted by the libnvdimm-core.
In this update the PMEM driver, on x86, gains the ability to assert
that writes to persistent memory have been flushed all the way
through the caches and buffers in the platform to persistent media.
See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through
"Block Data Windows" as defined by the NFIT. The primary difference
of this driver to PMEM is that only a small window of persistent
memory is mapped into system address space at any given point in
time.
Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
different portions of the media. BLK-mode, by definition, does not
support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss).
The sinister aspect of sector tearing is that most applications do
not know they have a atomic sector dependency. At least today's
disk's rarely ever tear sectors and if they do one almost certainly
gets a CRC error on access. NVDIMMs will always tear and always
silently. Until an application is audited to be robust in the
presence of sector-tearing the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore"
* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
arch, x86: pmem api for ensuring durability of persistent memory updates
libnvdimm: Add sysfs numa_node to NVDIMM devices
libnvdimm: Set numa_node to NVDIMM devices
acpi: Add acpi_map_pxm_to_online_node()
libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
pmem: flag pmem block devices as non-rotational
libnvdimm: enable iostat
pmem: make_request cleanups
libnvdimm, pmem: fix up max_hw_sectors
libnvdimm, blk: add support for blk integrity
libnvdimm, btt: add support for blk integrity
fs/block_dev.c: skip rw_page if bdev has integrity
libnvdimm: Non-Volatile Devices
tools/testing/nvdimm: libnvdimm unit test infrastructure
libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
nd_btt: atomic sector updates
libnvdimm: infrastructure for btt devices
libnvdimm: write blk label set
libnvdimm: write pmem label set
libnvdimm: blk labels and namespace instantiation
...
|
|
Based on an original patch by Ross Zwisler [1].
Writes to persistent memory have the potential to be posted to cpu
cache, cpu write buffers, and platform write buffers (memory controller)
before being committed to persistent media. Provide apis,
memcpy_to_pmem(), wmb_pmem(), and memremap_pmem(), to write data to
pmem and assert that it is durable in PMEM (a persistent linear address
range). A '__pmem' attribute is added so sparse can track proper usage
of pointers to pmem.
This continues the status quo of pmem being x86 only for 4.2, but
reworks to ioremap, and wider implementation of memremap() will enable
other archs in 4.3.
[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-May/000932.html
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
[djbw: various reworks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38938cc9e6c7f2d1011f88eba2b9e2b2 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
|
|
Add 842-format software compression and decompression functions.
Update the MAINTAINERS 842 section to include the new files.
The 842 compression function can compress any input data into the 842
compression format. The 842 decompression function can decompress any
standard-format 842 compressed data - specifically, either a compressed
data buffer created by the 842 software compression function, or a
compressed data buffer created by the 842 hardware compressor (located
in PowerPC coprocessors).
The 842 compressed data format is explained in the header comments.
This is used in a later patch to provide a full software 842 compression
and decompression crypto interface.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
"This is the final removal (after several years!) of the obsolete
cpus_* functions, prompted by their mis-use in staging.
With these function removed, all cpu functions should only iterate to
nr_cpu_ids, so we finally only allocate that many bits when cpumasks
are allocated offstack"
* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
cpumask: remove __first_cpu / __next_cpu
cpumask: resurrect CPU_MASK_CPU0
linux/cpumask.h: add typechecking to cpumask_test_cpu
cpumask: only allocate nr_cpumask_bits.
Fix weird uses of num_online_cpus().
cpumask: remove deprecated functions.
mips: fix obsolete cpumask_of_cpu usage.
x86: fix more deprecated cpu function usage.
ia64: remove deprecated cpus_ usage.
powerpc: fix deprecated CPU_MASK_CPU0 usage.
CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
staging/lustre/o2iblnd: Don't use cpus_weight
staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
blackfin: fix up obsolete cpu function usage.
parisc: fix up obsolete cpu function usage.
tile: fix up obsolete cpu function usage.
arm64: fix up obsolete cpu function usage.
mips: fix up obsolete cpu function usage.
x86: fix up obsolete cpu function usage.
...
|
|
Cc: Yalin Wang <yalin.wang@sonymobile.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using these functions with offstack cpus is unsafe. They use all NR_CPUS
bits, unstead of nr_cpumask_bits.
In particular, lustre (in staging) used cpus_ and that caused a bug.
Reported-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
"Yann E Morin was supposed to take over kconfig maintainership, but
this hasn't happened. So I'm sending a few kconfig patches that I
collected:
- Fix for missing va_end in kconfig
- merge_config.sh displays used if given too few arguments
- s/boolean/bool/ in Kconfig files for consistency, with the plan to
only support bool in the future"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: use va_end to match corresponding va_start
merge_config.sh: Display usage if given too few arguments
kconfig: use bool instead of boolean for type definition attributes
|
|
Keyword 'boolean' for type definition attributes is considered
deprecated and, therefore, should not be used anymore.
See http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
See http://lkml.kernel.org/r/1419108071-11607-1-git-send-email-cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Support for keyword 'boolean' will be dropped later on.
No functional change.
Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
this change add CONFIG_HAVE_ARCH_BITREVERSE config option,
so that we can use some architecture's bitrev hardware instruction
to do bitrev operation.
Introduce __constant_bitrev* macro for constant bitrev operation.
Change __bitrev16() __bitrev32() to be inline function,
don't need export symbol for these tiny functions.
Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.
This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.
NOTE! Even for x86, this really is kind of wrong. If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies. This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.
This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an
architecture specific scatterlist.h, make it a proper Kconfig option and
use that instead. At same time, remove the header files are are now
mostly useless and just include asm-generic/scatterlist.h.
[sfr@canb.auug.org.au: powerpc files now need asm/dma.h]
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was useful during development, and is retained for future
regression testing.
GCC appears to have no way to place string literals in a particular
section; adding __initconst to a char pointer leaves the string itself
in the default string section, where it will not be thrown away after
module load.
Thus all string constants are kept in explicitly declared and named
arrays. Sorry this makes printk a bit harder to read. At least the
tests are more compact.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a helper function from drivers/ata/libata_core.c, where it is
used to blacklist particular device models. It's being moved to lib/ so
other drivers may use it for the same purpose.
This implementation in non-recursive, so is safe for the kernel stack.
[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When SIGNATURE=y but depends on CRYPTO=m, it selects MPILIB as module
producing build break. This patch makes digsig to select crypto for
correcting dependency.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
lib/interval_tree.c provides a simple interface for an interval-tree
(an augmented red-black tree) but is only built when testing the generic
macros for building interval-trees. For drivers with modest needs,
export the simple interval-tree library as is.
v2: Lots of help from Michel Lespinasse to only compile the code
as required:
- make INTERVAL_TREE a config option
- make INTERVAL_TREE_TEST select the library functions
and sanitize the filenames & Makefile
- prepare interval_tree for being built as a module if required
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
[Acked for inclusion via drm/i915 by Andrew Morton.]
[danvet: switch to _GPL as per the mailing list discussion.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Pull audit updates from Eric Paris.
* git://git.infradead.org/users/eparis/audit: (28 commits)
AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
audit: do not cast audit_rule_data pointers pointlesly
AUDIT: Allow login in non-init namespaces
audit: define audit_is_compat in kernel internal header
kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
sched: declare pid_alive as inline
audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
syscall_get_arch: remove useless function arguments
audit: remove stray newline from audit_log_execve_info() audit_panic() call
audit: remove stray newlines from audit_log_lost messages
audit: include subject in login records
audit: remove superfluous new- prefix in AUDIT_LOGIN messages
audit: allow user processes to log from another PID namespace
audit: anchor all pid references in the initial pid namespace
audit: convert PPIDs to the inital PID namespace.
pid: get pid_t ppid of task in init_pid_ns
audit: rename the misleading audit_get_context() to audit_take_context()
audit: Add generic compat syscall support
audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
...
|
|
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally. So
HAS_IOPORT_MAP is the better name for this.
Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.
The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available. I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.
The changes in this commit were done using:
$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
lib/audit.c provides a generic function for auditing system calls.
This patch extends it for compat syscall support on bi-architectures
(32/64-bit) by adding lib/compat_audit.c.
What is required to support this feature are:
* add asm/unistd32.h for compat system call names
* select CONFIG_AUDIT_ARCH_COMPAT_GENERIC
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"In this patchset, we finally get an SELinux update, with Paul Moore
taking over as maintainer of that code.
Also a significant update for the Keys subsystem, as well as
maintenance updates to Smack, IMA, TPM, and Apparmor"
and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:
"Okay. There are a number of separate bits. I'll go over the big bits
and the odd important other bit, most of the smaller bits are just
fixes and cleanups. If you want the small bits accounting for, I can
do that too.
(1) Keyring capacity expansion.
KEYS: Consolidate the concept of an 'index key' for key access
KEYS: Introduce a search context structure
KEYS: Search for auth-key by name rather than target key ID
Add a generic associative array implementation.
KEYS: Expand the capacity of a keyring
Several of the patches are providing an expansion of the capacity of a
keyring. Currently, the maximum size of a keyring payload is one page.
Subtract a small header and then divide up into pointers, that only gives
you ~500 pointers on an x86_64 box. However, since the NFS idmapper uses
a keyring to store ID mapping data, that has proven to be insufficient to
the cause.
Whatever data structure I use to handle the keyring payload, it can only
store pointers to keys, not the keys themselves because several keyrings
may point to a single key. This precludes inserting, say, and rb_node
struct into the key struct for this purpose.
I could make an rbtree of records such that each record has an rb_node
and a key pointer, but that would use four words of space per key stored
in the keyring. It would, however, be able to use much existing code.
I selected instead a non-rebalancing radix-tree type approach as that
could have a better space-used/key-pointer ratio. I could have used the
radix tree implementation that we already have and insert keys into it by
their serial numbers, but that means any sort of search must iterate over
the whole radix tree. Further, its nodes are a bit on the capacious side
for what I want - especially given that key serial numbers are randomly
allocated, thus leaving a lot of empty space in the tree.
So what I have is an associative array that internally is a radix-tree
with 16 pointers per node where the index key is constructed from the key
type pointer and the key description. This means that an exact lookup by
type+description is very fast as this tells us how to navigate directly to
the target key.
I made the data structure general in lib/assoc_array.c as far as it is
concerned, its index key is just a sequence of bits that leads to a
pointer. It's possible that someone else will be able to make use of it
also. FS-Cache might, for example.
(2) Mark keys as 'trusted' and keyrings as 'trusted only'.
KEYS: verify a certificate is signed by a 'trusted' key
KEYS: Make the system 'trusted' keyring viewable by userspace
KEYS: Add a 'trusted' flag and a 'trusted only' flag
KEYS: Separate the kernel signature checking keyring from module signing
These patches allow keys carrying asymmetric public keys to be marked as
being 'trusted' and allow keyrings to be marked as only permitting the
addition or linkage of trusted keys.
Keys loaded from hardware during kernel boot or compiled into the kernel
during build are marked as being trusted automatically. New keys can be
loaded at runtime with add_key(). They are checked against the system
keyring contents and if their signatures can be validated with keys that
are already marked trusted, then they are marked trusted also and can
thus be added into the master keyring.
Patches from Mimi Zohar make this usable with the IMA keyrings also.
(3) Remove the date checks on the key used to validate a module signature.
X.509: Remove certificate date checks
It's not reasonable to reject a signature just because the key that it was
generated with is no longer valid datewise - especially if the kernel
hasn't yet managed to set the system clock when the first module is
loaded - so just remove those checks.
(4) Make it simpler to deal with additional X.509 being loaded into the kernel.
KEYS: Load *.x509 files into kernel keyring
KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate
The builder of the kernel now just places files with the extension ".x509"
into the kernel source or build trees and they're concatenated by the
kernel build and stuffed into the appropriate section.
(5) Add support for userspace kerberos to use keyrings.
KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
KEYS: Implement a big key type that can save to tmpfs
Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
We looked at storing it in keyrings instead as that confers certain
advantages such as tickets being automatically deleted after a certain
amount of time and the ability for the kernel to get at these tokens more
easily.
To make this work, two things were needed:
(a) A way for the tickets to persist beyond the lifetime of all a user's
sessions so that cron-driven processes can still use them.
The problem is that a user's session keyrings are deleted when the
session that spawned them logs out and the user's user keyring is
deleted when the UID is deleted (typically when the last log out
happens), so neither of these places is suitable.
I've added a system keyring into which a 'persistent' keyring is
created for each UID on request. Each time a user requests their
persistent keyring, the expiry time on it is set anew. If the user
doesn't ask for it for, say, three days, the keyring is automatically
expired and garbage collected using the existing gc. All the kerberos
tokens it held are then also gc'd.
(b) A key type that can hold really big tickets (up to 1MB in size).
The problem is that Active Directory can return huge tickets with lots
of auxiliary data attached. We don't, however, want to eat up huge
tracts of unswappable kernel space for this, so if the ticket is
greater than a certain size, we create a swappable shmem file and dump
the contents in there and just live with the fact we then have an
inode and a dentry overhead. If the ticket is smaller than that, we
slap it in a kmalloc()'d buffer"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
KEYS: Fix keyring content gc scanner
KEYS: Fix error handling in big_key instantiation
KEYS: Fix UID check in keyctl_get_persistent()
KEYS: The RSA public key algorithm needs to select MPILIB
ima: define '_ima' as a builtin 'trusted' keyring
ima: extend the measurement list to include the file signature
kernel/system_certificate.S: use real contents instead of macro GLOBAL()
KEYS: fix error return code in big_key_instantiate()
KEYS: Fix keyring quota misaccounting on key replacement and unlink
KEYS: Fix a race between negating a key and reading the error set
KEYS: Make BIG_KEYS boolean
apparmor: remove the "task" arg from may_change_ptraced_domain()
apparmor: remove parent task info from audit logging
apparmor: remove tsk field from the apparmor_audit_struct
apparmor: fix capability to not use the current task, during reporting
Smack: Ptrace access check mode
ima: provide hash algo info in the xattr
ima: enable support for larger default filedata hash algorithms
ima: define kernel parameter 'ima_template=' to change configured default
ima: add Kconfig default measurement list template
...
|
|
Avoid the fragile Kconfig construct guestimating spinlock_t sizes; use a
friendly compile-time test to determine this.
[kirill.shutemov@linux.intel.com: drop CONFIG_CMPXCHG_LOCKREF]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We generated a battery of 100 test cases from GSL taus113 implemention
and compare the results from a particular seed and a particular
iteration with our implementation in the kernel. We have verified on
32 and 64 bit machines that our taus113 kernel implementation gives
same results as GSL taus113 implementation:
[ 0.147370] prandom: seed boundary self test passed
[ 0.148078] prandom: 100 self tests passed
This is a Kconfig option that is disabled on default, just like the
crc32 init selftests in order to not unnecessary slow down boot process.
We also refactored out prandom_seed_very_weak() as it's now used in
multiple places in order to reduce redundant code.
GSL code we used for generating test cases:
int i, j;
srand(time(NULL));
for (i = 0; i < 100; ++i) {
int iteration = 500 + (rand() % 500);
gsl_rng_default_seed = rand() + 1;
gsl_rng *r = gsl_rng_alloc(gsl_rng_taus113);
printf("\t{ %lu, ", gsl_rng_default_seed);
for (j = 0; j < iteration - 1; ++j)
gsl_rng_get(r);
printf("%u, %lu },\n", iteration, gsl_rng_get(r));
gsl_rng_free(r);
}
Joint work with Hannes Frederic Sowa.
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a generic associative array implementation that can be used as the
container for keyrings, thereby massively increasing the capacity available
whilst also speeding up searching in keyrings that contain a lot of keys.
This may also be useful in FS-Cache for tracking cookies.
Documentation is added into Documentation/associative_array.txt
Some of the properties of the implementation are:
(1) Objects are opaque pointers. The implementation does not care where they
point (if anywhere) or what they point to (if anything).
[!] NOTE: Pointers to objects _must_ be zero in the two least significant
bits.
(2) Objects do not need to contain linkage blocks for use by the array. This
permits an object to be located in multiple arrays simultaneously.
Rather, the array is made up of metadata blocks that point to objects.
(3) Objects are labelled as being one of two types (the type is a bool value).
This information is stored in the array, but has no consequence to the
array itself or its algorithms.
(4) Objects require index keys to locate them within the array.
(5) Index keys must be unique. Inserting an object with the same key as one
already in the array will replace the old object.
(6) Index keys can be of any length and can be of different lengths.
(7) Index keys should encode the length early on, before any variation due to
length is seen.
(8) Index keys can include a hash to scatter objects throughout the array.
(9) The array can iterated over. The objects will not necessarily come out in
key order.
(10) The array can be iterated whilst it is being modified, provided the RCU
readlock is being held by the iterator. Note, however, under these
circumstances, some objects may be seen more than once. If this is a
problem, the iterator should lock against modification. Objects will not
be missed, however, unless deleted.
(11) Objects in the array can be looked up by means of their index key.
(12) Objects can be looked up whilst the array is being modified, provided the
RCU readlock is being held by the thread doing the look up.
The implementation uses a tree of 16-pointer nodes internally that are indexed
on each level by nibbles from the index key. To improve memory efficiency,
shortcuts can be emplaced to skip over what would otherwise be a series of
single-occupancy nodes. Further, nodes pack leaf object pointers into spare
space in the node rather than making an extra branch until as such time an
object needs to be added to a full node.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull crypto update from Herbert Xu:
"Here is the crypto update for 3.12:
- Added MODULE_SOFTDEP to allow pre-loading of modules.
- Reinstated crct10dif driver using the module softdep feature.
- Allow via rng driver to be auto-loaded.
- Split large input data when necessary in nx.
- Handle zero length messages correctly for GCM/XCBC in nx.
- Handle SHA-2 chunks bigger than block size properly in nx.
- Handle unaligned lengths in omap-aes.
- Added SHA384/SHA512 to omap-sham.
- Added OMAP5/AM43XX SHAM support.
- Added OMAP4 TRNG support.
- Misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
hwrng: via - Add MODULE_DEVICE_TABLE
crypto: fcrypt - Fix bitoperation for compilation with clang
crypto: nx - fix SHA-2 for chunks bigger than block size
crypto: nx - fix GCM for zero length messages
crypto: nx - fix XCBC for zero length messages
crypto: nx - fix limits to sg lists for AES-CCM
crypto: nx - fix limits to sg lists for AES-XCBC
crypto: nx - fix limits to sg lists for AES-GCM
crypto: nx - fix limits to sg lists for AES-CTR
crypto: nx - fix limits to sg lists for AES-CBC
crypto: nx - fix limits to sg lists for AES-ECB
crypto: nx - add offset to nx_build_sg_lists()
padata - Register hotcpu notifier after initialization
padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED
hwrng: omap - reorder OMAP TRNG driver code
crypto: omap-sham - correct dma burst size
crypto: omap-sham - Enable Polling mode if DMA fails
crypto: tegra-aes - bitwise vs logical and
crypto: sahara - checking the wrong variable
...
|
|
transform framework"
This patch reinstates commits
67822649d7305caf3dd50ed46c27b99c94eff996
39761214eefc6b070f29402aa1165f24d789b3f7
0b95a7f85718adcbba36407ef88bba0a7379ed03
31d939625a9a20b1badd2d4e6bf6fd39fa523405
2d31e518a42828df7877bca23a958627d60408bc
Now that module softdeps are in the kernel we can use that to resolve
the boot issue which cause the revert.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of taking the spinlock, the lockless versions atomically check
that the lock is not taken, and do the reference count update using a
cmpxchg() loop. This is semantically identical to doing the reference
count update protected by the lock, but avoids the "wait for lock"
contention that you get when accesses to the reference count are
contended.
Note that a "lockref" is absolutely _not_ equivalent to an atomic_t.
Even when the lockref reference counts are updated atomically with
cmpxchg, the fact that they also verify the state of the spinlock means
that the lockless updates can never happen while somebody else holds the
spinlock.
So while "lockref_put_or_lock()" looks a lot like just another name for
"atomic_dec_and_lock()", and both optimize to lockless updates, they are
fundamentally different: the decrement done by atomic_dec_and_lock() is
truly independent of any lock (as long as it doesn't decrement to zero),
so a locked region can still see the count change.
The lockref structure, in contrast, really is a *locked* reference
count. If you hold the spinlock, the reference count will be stable and
you can modify the reference count without using atomics, because even
the lockless updates will see and respect the state of the lock.
In order to enable the cmpxchg lockless code, the architecture needs to
do three things:
(1) Make sure that the "arch_spinlock_t" and an "unsigned int" can fit
in an aligned u64, and have a "cmpxchg()" implementation that works
on such a u64 data type.
(2) define a helper function to test for a spinlock being unlocked
("arch_spin_value_unlocked()")
(3) select the "ARCH_USE_CMPXCHG_LOCKREF" config variable in its
Kconfig file.
This enables it for x86-64 (but not 32-bit, we'd need to make sure
cmpxchg() turns into the proper cmpxchg8b in order to enable it for
32-bit mode).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull crypto fixes from Herbert Xu:
"This push fixes a memory corruption issue in caam, as well as
reverting the new optimised crct10dif implementation as it breaks boot
on initrd systems.
Hopefully crct10dif will be reinstated once the supporting code is
added so that it doesn't break boot"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
crypto: caam - Fixed the memory out of bound overwrite issue
|
|
transform framework"
This reverts commits
67822649d7305caf3dd50ed46c27b99c94eff996
39761214eefc6b070f29402aa1165f24d789b3f7
0b95a7f85718adcbba36407ef88bba0a7379ed03
31d939625a9a20b1badd2d4e6bf6fd39fa523405
2d31e518a42828df7877bca23a958627d60408bc
Unfortunately this change broke boot on some systems that used an
initrd which does not include the newly created crct10dif modules.
As these modules are required by sd_mod under certain configurations
this is a serious problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patchset is for supporting LZ4 compression and the crypto API using
it.
As shown below, the size of data is a little bit bigger but compressing
speed is faster under the enabled unaligned memory access. We can use
lz4 de/compression through crypto API as well. Also, It will be useful
for another potential user of lz4 compression.
lz4 Compression Benchmark:
Compiler: ARM gcc 4.6.4
ARMv7, 1 GHz based board
Kernel: linux 3.4
Uncompressed data Size: 101 MB
Compressed Size compression Speed
LZO 72.1MB 32.1MB/s, 33.0MB/s(UA)
LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA)
LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA)
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch:
Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs
for kernel are based on LZ4 implementation by Yann Collet and were changed
for kernel coding style.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
svn revision : r90
Two APIs are added:
lz4_compress() support basic lz4 compression whereas lz4hc_compress()
support high compression or CPU performance get lower but compression
ratio get higher. Also, we require the pre-allocated working memory with
the defined size and destination buffer must be allocated with the size of
lz4_compressbound.
[akpm@linux-foundation.org: make lz4_compresshcctx() static]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for extracting LZ4-compressed kernel images, as well as
LZ4-compressed ramdisk images in the kernel boot process.
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull crypto update from Herbert Xu:
- Do not idle omap device between crypto operations in one session.
- Added sha224/sha384 shims for SSSE3.
- More optimisations for camellia-aesni-avx2.
- Removed defunct blowfish/twofish AVX2 implementations.
- Added unaligned buffer self-tests.
- Added PCLMULQDQ optimisation for CRCT10DIF.
- Added support for Freescale's DCP co-processor
- Misc fixes.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
crypto: testmgr - test hash implementations with unaligned buffers
crypto: testmgr - test AEADs with unaligned buffers
crypto: testmgr - test skciphers with unaligned buffers
crypto: testmgr - check that entries in alg_test_descs are in correct order
Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
crypto: camellia-aesni-avx2 - tune assembly code for more performance
hwrng: bcm2835 - fix MODULE_LICENSE tag
hwrng: nomadik - use clk_prepare_enable()
crypto: picoxcell - replace strict_strtoul() with kstrtoul()
crypto: dcp - Staticize local symbols
crypto: dcp - Use NULL instead of 0
crypto: dcp - Use devm_* APIs
crypto: dcp - Remove redundant platform_set_drvdata()
hwrng: use platform_{get,set}_drvdata()
crypto: omap-aes - Don't idle/start AES device between Encrypt operations
crypto: crct10dif - Use PTR_RET
crypto: ux500 - Cocci spatch "resource_size.spatch"
crypto: sha256_ssse3 - add sha224 support
crypto: sha512_ssse3 - add sha384 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull "exotic" arch fixes from Geert Uytterhoeven:
"This is a collection of several exotic architecture fixes, and a few
other fixes for issues that were detected while doing the former"
* 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (35 commits)
lib: Move fonts from drivers/video/console/ to lib/fonts/
console/font: Refactor font support code selection logic
Revert "staging/solo6x10: depend on CONFIG_FONTS"
input: cros_ec_keyb_clear_keyboard() depends on CONFIG_PM_SLEEP
score: Wire up asm-generic/xor.h
score: Remove unneeded <asm/dma-mapping.h>
openrisc: Wire up asm-generic/xor.h
h8300/boot: Use POSIX "$((..))" instead of bashism "$[...]"
h8300: Mark H83002 and H83048 CPU support broken
h8300: Switch h8300 to drivers/Kconfig
h8300: Limit timer channel ranges in Kconfig
h8300: Wire up asm-generic/xor.h
h8300: Fill the system call table using a CALL() macro
h8300: Fix <asm/tlb.h>
h8300: Hardcode symbol prefixes in asm sources
h8300: add missing definition for read_barries_depends()
frv: head.S - Remove commented-out initialization code
cris: Wire up asm-generic/vga.h
parport: disable PC-style parallel port support on cris
console: Disable VGA text console support on cris
...
|
|
Several drivers need font support independent of CONFIG_VT, cfr. commit
9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font
support code selection logic").
Hence move the fonts and their support logic from drivers/video/console/ to
its own library directory lib/fonts/.
This also allows to limit processing of drivers/video/console/Makefile to
CONFIG_VT=y again.
[Kevin Hilman <khilman@linaro.org>: Update arch/arm/boot/compressed/Makefile]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
