| Age | Commit message (Collapse) | Author |
|---|
|
Changes in 4.4.115
loop: fix concurrent lo_open/lo_release
bpf: fix branch pruning logic
x86: bpf_jit: small optimization in emit_bpf_tail_call()
bpf: fix bpf_tail_call() x64 JIT
bpf: introduce BPF_JIT_ALWAYS_ON config
bpf: arsh is not supported in 32 bit alu thus reject it
bpf: avoid false sharing of map refcount with max_entries
bpf: fix divides by zero
bpf: fix 32-bit divide by zero
bpf: reject stores into ctx via st and xadd
x86/pti: Make unpoison of pgd for trusted boot work for real
kaiser: fix intel_bts perf crashes
ALSA: seq: Make ioctls race-free
crypto: aesni - handle zero length dst buffer
crypto: af_alg - whitelist mask and type
power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE
mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
igb: Free IRQs when device is hotplugged
KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure
KVM: x86: Don't re-execute instruction when not passing CR2 value
KVM: X86: Fix operand/address-size during instruction decoding
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Preserve read-only values in the redirection table
ACPI / bus: Leave modalias empty for devices which are not present
cpufreq: Add Loongson machine dependencies
bcache: check return value of register_shrinker
drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
drm/amdkfd: Fix SDMA ring buffer size calculation
drm/amdkfd: Fix SDMA oversubsription handling
openvswitch: fix the incorrect flow action alloc size
mac80211: fix the update of path metric for RANN frame
btrfs: fix deadlock when writing out space cache
KVM: VMX: Fix rflags cache during vCPU reset
xen-netfront: remove warning when unloading module
nfsd: CLOSE SHOULD return the invalid special stateid for NFSv4.x (x>0)
nfsd: Ensure we check stateid validity in the seqid operation checks
grace: replace BUG_ON by WARN_ONCE in exit_net hook
nfsd: check for use of the closed special stateid
lockd: fix "list_add double add" caused by legacy signal interface
hwmon: (pmbus) Use 64bit math for DIRECT format values
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
quota: Check for register_shrinker() failure.
SUNRPC: Allow connect to return EHOSTUNREACH
kmemleak: add scheduling point to kmemleak_scan()
drm/omap: Fix error handling path in 'omap_dmm_probe()'
xfs: ubsan fixes
scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path
scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg
media: usbtv: add a new usbid
usb: gadget: don't dereference g until after it has been null checked
staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID
usb: option: Add support for FS040U modem
USB: serial: pl2303: new device id for Chilitag
USB: cdc-acm: Do not log urb submission errors on disconnect
CDC-ACM: apply quirk for card reader
USB: serial: io_edgeport: fix possible sleep-in-atomic
usbip: prevent bind loops on devices attached to vhci_hcd
usbip: list: don't list devices attached to vhci_hcd
USB: serial: simple: add Motorola Tetra driver
usb: f_fs: Prevent gadget unbind if it is already unbound
usb: uas: unconditionally bring back host after reset
selinux: general protection fault in sock_has_perm
serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
spi: imx: do not access registers while clocks disabled
Linux 4.4.115
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
[ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ]
kmemleak_scan() will scan struct page for each node and it can be really
large and resulting in a soft lockup. We have seen a soft lockup when
do scan while compile kernel:
watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287]
[...]
Call Trace:
kmemleak_scan+0x21a/0x4c0
kmemleak_write+0x312/0x350
full_proxy_write+0x5a/0xa0
__vfs_write+0x33/0x150
vfs_write+0xad/0x1a0
SyS_write+0x52/0xc0
do_syscall_64+0x61/0x1a0
entry_SYSCALL64_slow_path+0x25/0x25
Fix this by adding cond_resched every MAX_SCAN_SIZE.
Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.114
x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels
usbip: prevent vhci_hcd driver from leaking a socket pointer address
usbip: Fix implicit fallthrough warning
usbip: Fix potential format overflow in userspace tools
x86/microcode/intel: Fix BDW late-loading revision check
x86/cpu/intel: Introduce macros for Intel family numbers
x86/retpoline: Fill RSB on context switch for affected CPUs
sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks
can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
PM / sleep: declare __tracedata symbols as char[] rather than char
time: Avoid undefined behaviour in ktime_add_safe()
timers: Plug locking race vs. timer migration
Prevent timer value 0 for MWAITX
drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled
drivers: base: cacheinfo: fix boot error message when acpi is enabled
PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID
PCI: layerscape: Fix MSG TLP drop setting
mmc: sdhci-of-esdhc: add/remove some quirks according to vendor version
fs/select: add vmalloc fallback for select(2)
mm/mmap.c: do not blow on PROT_NONE MAP_FIXED holes in the stack
hwpoison, memcg: forcibly uncharge LRU pages
cma: fix calculation of aligned offset
mm, page_alloc: fix potential false positive in __zone_watermark_ok
ipc: msg, make msgrcv work with LONG_MIN
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
ACPI / processor: Avoid reserving IO regions too early
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
ACPICA: Namespace: fix operand cache leak
netfilter: x_tables: speed up jump target validation
netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed in 64bit kernel
netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags
netfilter: nf_ct_expect: remove the redundant slash when policy name is empty
netfilter: nfnetlink_queue: reject verdict request from different portid
netfilter: restart search if moved to other chain
netfilter: nf_conntrack_sip: extend request line validation
netfilter: use fwmark_reflect in nf_send_reset
netfilter: fix IS_ERR_VALUE usage
netfilter: nfnetlink_cthelper: Add missing permission checks
netfilter: xt_osf: Add missing permission checks
ext2: Don't clear SGID when inheriting ACLs
reiserfs: fix race in prealloc discard
reiserfs: don't preallocate blocks for extended attributes
reiserfs: Don't clear SGID when inheriting ACLs
fs/fcntl: f_setown, avoid undefined behaviour
scsi: libiscsi: fix shifting of DID_REQUEUE host byte
Revert "module: Add retpoline tag to VERMAGIC"
Input: trackpoint - force 3 buttons if 0 button is reported
usb: usbip: Fix possible deadlocks reported by lockdep
usbip: fix stub_rx: get_pipe() to validate endpoint number
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
usbip: prevent leaking socket pointer address in messages
um: link vmlinux with -no-pie
vsyscall: Fix permissions for emulate mode with KAISER/PTI
eventpoll.h: add missing epoll event masks
x86/microcode/intel: Extend BDW late-loading further with LLC size check
hrtimer: Reset hrtimer cpu base proper on CPU hotplug
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
ipv6: fix udpv6 sendmsg crash caused by too small MTU
ipv6: ip6_make_skb() needs to clear cork.base.dst
lan78xx: Fix failure in USB Full Speed
net: igmp: fix source address check for IGMPv3 reports
tcp: __tcp_hdrlen() helper
net: qdisc_pkt_len_init() should be more robust
pppoe: take ->needed_headroom of lower device into account on xmit
r8169: fix memory corruption on retrieval of hardware statistics.
sctp: do not allow the v4 socket to bind a v4mapped v6 address
sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf
vmxnet3: repair memory leak
net: Allow neigh contructor functions ability to modify the primary_key
ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY
flow_dissector: properly cap thoff field
net: tcp: close sock if net namespace is exiting
nfsd: auth: Fix gid sorting when rootsquash enabled
Linux 4.4.114
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit b050e3769c6b4013bb937e879fc43bf1847ee819 upstream.
Since commit 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for
order-0 allocations"), __zone_watermark_ok() check for high-order
allocations will shortcut per-migratetype free list checks for
ALLOC_HARDER allocations, and return true as long as there's free page
of any migratetype. The intention is that ALLOC_HARDER can allocate
from MIGRATE_HIGHATOMIC free lists, while normal allocations can't.
However, as a side effect, the watermark check will then also return
true when there are pages only on the MIGRATE_ISOLATE list, or (prior to
CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list. Since the
allocation cannot actually obtain isolated pages, and might not be able
to obtain CMA pages, this can result in a false positive.
The condition should be rare and perhaps the outcome is not a fatal one.
Still, it's better if the watermark check is correct. There also
shouldn't be a performance tradeoff here.
Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz
Fixes: 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for order-0 allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e048cb32f69038aa1c8f11e5c1b331be4181659d upstream.
The align_offset parameter is used by bitmap_find_next_zero_area_off()
to represent the offset of map's base from the previous alignment
boundary; the function ensures that the returned index, plus the
align_offset, honors the specified align_mask.
The logic introduced by commit b5be83e308f7 ("mm: cma: align to physical
address, not CMA region position") has the cma driver calculate the
offset to the *next* alignment boundary. In most cases, the base
alignment is greater than that specified when making allocations,
resulting in a zero offset whether we align up or down. In the example
given with the commit, the base alignment (8MB) was half the requested
alignment (16MB) so the math also happened to work since the offset is
8MB in both directions. However, when requesting allocations with an
alignment greater than twice that of the base, the returned index would
not be correctly aligned.
Also, the align_order arguments of cma_bitmap_aligned_mask() and
cma_bitmap_aligned_offset() should not be negative so the argument type
was made unsigned.
Fixes: b5be83e308f7 ("mm: cma: align to physical address, not CMA region position")
Link: http://lkml.kernel.org/r/20170628170742.2895-1-opendmb@gmail.com
Signed-off-by: Angus Clark <angus@angusclark.org>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Angus Clark <angus@angusclark.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18365225f0440d09708ad9daade2ec11275c3df9 upstream.
Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In
his particular case he has hit a bad_page("page still charged to
cgroup") when onlining a hwpoison page. While this looks like something
that shouldn't happen in the first place because onlining hwpages and
returning them to the page allocator makes only little sense it shows a
real problem.
hwpoison pages do not get freed usually so we do not uncharge them (at
least not since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge
API")). Each charge pins memcg (since e8ea14cc6ead ("mm: memcontrol:
take a css reference for each charged page")) as well and so the
mem_cgroup and the associated state will never go away. Fix this leak
by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache().
We also have to tweak uncharge_list because it cannot rely on zero ref
count for these pages.
[akpm@linux-foundation.org: coding-style fixes]
Fixes: 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API")
Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 561b5e0709e4a248c67d024d4d94b6e31e3edf2f upstream.
Commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") has
introduced a regression in some rust and Java environments which are
trying to implement their own stack guard page. They are punching a new
MAP_FIXED mapping inside the existing stack Vma.
This will confuse expand_{downwards,upwards} into thinking that the
stack expansion would in fact get us too close to an existing non-stack
vma which is a correct behavior wrt safety. It is a real regression on
the other hand.
Let's work around the problem by considering PROT_NONE mapping as a part
of the stack. This is a gros hack but overflowing to such a mapping
would trap anyway an we only can hope that usespace knows what it is
doing and handle it propely.
Fixes: 1be7107fbe18 ("mm: larger stack guard gap, between vmas")
Link: http://lkml.kernel.org/r/20170705182849.GA18027@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.112
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
KVM: Fix stack-out-of-bounds read in write_mmio
can: gs_usb: fix return value of the "set_bittiming" callback
IB/srpt: Disable RDMA access by the initiator
MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
MIPS: Factor out NT_PRFPREG regset access helpers
MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
net/mac80211/debugfs.c: prevent build failure with CONFIG_UBSAN=y
kvm: vmx: Scrub hardware GPRs at VM-exit
x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n
x86/acpi: Handle SCI interrupts above legacy space gracefully
iommu/arm-smmu-v3: Don't free page table ops twice
ALSA: pcm: Remove incorrect snd_BUG_ON() usages
ALSA: pcm: Add missing error checks in OSS emulation plugin builder
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
ALSA: aloop: Release cable upon open error path
ALSA: aloop: Fix inconsistent format due to incomplete rule
ALSA: aloop: Fix racy hw constraints adjustment
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
mm/compaction: fix invalid free_pfn and compact_cached_free_pfn
mm/compaction: pass only pageblock aligned range to pageblock_pfn_to_page
mm/page-writeback: fix dirty_ratelimit calculation
mm/zswap: use workqueue to destroy pool
zswap: don't param_set_charp while holding spinlock
locks: don't check for race with close when setting OFD lock
futex: Replace barrier() in unqueue_me() with READ_ONCE()
locking/mutex: Allow next waiter lockless wakeup
usbvision fix overflow of interfaces array
usb: musb: ux500: Fix NULL pointer dereference at system PM
r8152: fix the wake event
r8152: use test_and_clear_bit
r8152: adjust ALDPS function
lan78xx: use skb_cow_head() to deal with cloned skbs
sr9700: use skb_cow_head() to deal with cloned skbs
smsc75xx: use skb_cow_head() to deal with cloned skbs
cx82310_eth: use skb_cow_head() to deal with cloned skbs
x86/mm/pat, /dev/mem: Remove superfluous error message
hwrng: core - sleep interruptible in read
sysrq: Fix warning in sysrq generated crash.
xhci: Fix ring leak in failure path of xhci_alloc_virt_device()
Revert "userfaultfd: selftest: vm: allow to build in vm/ directory"
x86/pti/efi: broken conversion from efi to kernel page table
8021q: fix a memory leak for VLAN 0 device
ip6_tunnel: disable dst caching if tunnel is dual-stack
net: core: fix module type in sock_diag_bind
RDS: Heap OOB write in rds_message_alloc_sgs()
RDS: null pointer dereference in rds_atomic_free_op
sh_eth: fix TSU resource handling
sh_eth: fix SH7757 GEther initialization
net: stmmac: enable EEE in MII, GMII or RGMII only
ipv6: fix possible mem leaks in ipv6_make_skb()
crypto: algapi - fix NULL dereference in crypto_remove_spawns()
rbd: set max_segments to USHRT_MAX
x86/microcode/intel: Extend BDW late-loading with a revision check
KVM: x86: Add memory barrier on vmcs field lookup
drm/vmwgfx: Potential off by one in vmw_view_add()
kaiser: Set _PAGE_NX only if supported
bpf: add bpf_patch_insn_single helper
bpf: don't (ab)use instructions to store state
bpf: move fixup_bpf_calls() function
bpf: refactor fixup_bpf_calls()
bpf: adjust insn_aux_data when patching insns
bpf: prevent out-of-bounds speculation
bpf, array: fix overflow in max_entries and undefined behavior in index_mask
iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
USB: serial: cp210x: add new device ID ELV ALC 8xxx
usb: misc: usb3503: make sure reset is low for at least 100us
USB: fix usbmon BUG trigger
usbip: remove kernel addresses from usb device and urb debug msgs
staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl
Bluetooth: Prevent stack info leak from the EFS element.
uas: ignore UAS for Norelsys NS1068(X) chips
e1000e: Fix e1000_check_for_copper_link_ich8lan return value.
x86/Documentation: Add PTI description
x86/cpu: Factor out application of forced CPU caps
x86/cpufeatures: Make CPU bugs sticky
x86/cpufeatures: Add X86_BUG_CPU_INSECURE
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/cpufeatures: Add X86_BUG_SPECTRE_V[12]
x86/cpu: Merge bugs.c and bugs_64.c
sysfs/cpu: Add vulnerability folder
x86/cpu: Implement CPU vulnerabilites sysfs functions
sysfs/cpu: Fix typos in vulnerability documentation
x86/alternatives: Fix optimize_nops() checking
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
selftests/x86: Add test_vsyscall
Linux 4.4.112
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit fd5bb66cd934987e49557455b6497fc006521940 upstream.
Change the zpool/compressor param callback function to release the
zswap_pools_lock spinlock before calling param_set_charp, since that
function may sleep when it calls kmalloc with GFP_KERNEL.
While this problem has existed for a while, I wasn't able to trigger it
using a tight loop changing either/both the zpool and compressor params; I
think it's very unlikely to be an issue on the stable kernels, especially
since most zswap users will change the compressor and/or zpool from sysfs
only one time each boot - or zero times, if they add the params to the
kernel boot.
Fixes: c99b42c3529e ("zswap: use charp for zswap param strings")
Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 200867af4dedfe7cb707f96773684de1d1fd21e6 upstream.
Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to
use the workqueue instead of using call_rcu().
When zswap destroys a pool no longer in use, it uses call_rcu() to
perform the destruction/freeing. Since that executes in softirq
context, it must not sleep. However, actually destroying the pool
involves freeing the per-cpu compressors (which requires locking the
cpu_add_remove_lock mutex) and freeing the zpool, for which the
implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which
locks the slab_mutex). So if either mutex is currently taken, or any
other part of the compressor or zpool implementation sleeps, it will
result in a BUG().
It's not easy to reproduce this when changing zswap's params normally.
In testing with a loaded system, this does not fail:
$ cd /sys/module/zswap/parameters
$ echo lz4 > compressor ; echo zsmalloc > zpool
nor does this:
$ while true ; do
> echo lzo > compressor ; echo zbud > zpool
> sleep 1
> echo lz4 > compressor ; echo zsmalloc > zpool
> sleep 1
> done
although it's still possible either of those might fail, depending on
whether anything else besides zswap has locked the mutexes.
However, changing a parameter with no delay immediately causes the
schedule while atomic BUG:
$ while true ; do
> echo lzo > compressor ; echo lz4 > compressor
> done
This is essentially the same as Yu Zhao's proposed patch to zsmalloc,
but moved to zswap, to cover compressor and zpool freeing.
Fixes: f1c54846ee45 ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d59b1087a98e402ed9a7cc577f4da435f9a555f5 upstream.
Calculation of dirty_ratelimit sometimes is not correct. E.g. initial
values of dirty_ratelimit == INIT_BW and step == 0, lead to the
following result:
UBSAN: Undefined behaviour in ../mm/page-writeback.c:1286:7
shift exponent 25600 is too large for 64-bit type 'long unsigned int'
The fix is straightforward - make step 0 if the shift exponent is too
big.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1409c325fdc1fef7b3d8025c51892355f065d15 upstream.
pageblock_pfn_to_page() is used to check there is valid pfn and all
pages in the pageblock is in a single zone. If there is a hole in the
pageblock, passing arbitrary position to pageblock_pfn_to_page() could
cause to skip whole pageblock scanning, instead of just skipping the
hole page. For deterministic behaviour, it's better to always pass
pageblock aligned range to pageblock_pfn_to_page(). It will also help
further optimization on pageblock_pfn_to_page() in the following patch.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 623446e4dc45b37740268165107cc63abb3022f0 upstream.
free_pfn and compact_cached_free_pfn are the pointer that remember
restart position of freepage scanner. When they are reset or invalid,
we set them to zone_end_pfn because freepage scanner works in reverse
direction. But, because zone range is defined as [zone_start_pfn,
zone_end_pfn), zone_end_pfn is invalid to access. Therefore, we should
not store it to free_pfn and compact_cached_free_pfn. Instead, we need
to store zone_end_pfn - 1 to them. There is one more thing we should
consider. Freepage scanner scan reversely by pageblock unit. If
free_pfn and compact_cached_free_pfn are set to middle of pageblock, it
regards that sitiation as that it already scans front part of pageblock
so we lose opportunity to scan there. To fix-up, this patch do
round_down() to guarantee that reset position will be pageblock aligned.
Note that thanks to the current pageblock_pfn_to_page() implementation,
actual access to zone_end_pfn doesn't happen until now. But, following
patch will change pageblock_pfn_to_page() so this patch is needed from
now on.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.111
x86/kasan: Write protect kasan zero shadow
kernel/acct.c: fix the acct->needcheck check in check_free_space()
crypto: n2 - cure use after free
crypto: chacha20poly1305 - validate the digest size
crypto: pcrypt - fix freeing pcrypt instances
sunxi-rsb: Include OF based modalias in device uevent
fscache: Fix the default for fscache_maybe_release_page()
kernel: make groups_sort calling a responsibility group_info allocators
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL
kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals
kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal()
ARC: uaccess: dont use "l" gcc inline asm constraint modifier
Input: elantech - add new icbody type 15
x86/microcode/AMD: Add support for fam17h microcode loading
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
x86/tlb: Drop the _GPL from the cpu_tlbstate export
genksyms: Handle string literals with spaces in reference files
module: keep percpu symbols in module's symtab
module: Issue warnings when tainting kernel
proc: much faster /proc/vmstat
Map the vsyscall page with _PAGE_USER
Fix build error in vma.c
Linux 4.4.111
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 68ba0326b4e14988f9e0c24a6e12a85cf2acd1ca upstream.
Every current KDE system has process named ksysguardd polling files
below once in several seconds:
$ strace -e trace=open -p $(pidof ksysguardd)
Process 1812 attached
open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8
open("/etc/mtab", O_RDONLY|O_CLOEXEC) = 8
open("/proc/net/dev", O_RDONLY) = 8
open("/proc/net/wireless", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/proc/stat", O_RDONLY) = 8
open("/proc/vmstat", O_RDONLY) = 8
Hell knows what it is doing but speed up reading /proc/vmstat by 33%!
Benchmark is open+read+close 1.000.000 times.
BEFORE
$ perf stat -r 10 taskset -c 3 ./proc-vmstat
Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):
13146.768464 task-clock (msec) # 0.960 CPUs utilized ( +- 0.60% )
15 context-switches # 0.001 K/sec ( +- 1.41% )
1 cpu-migrations # 0.000 K/sec ( +- 11.11% )
104 page-faults # 0.008 K/sec ( +- 0.57% )
45,489,799,349 cycles # 3.460 GHz ( +- 0.03% )
9,970,175,743 stalled-cycles-frontend # 21.92% frontend cycles idle ( +- 0.10% )
2,800,298,015 stalled-cycles-backend # 6.16% backend cycles idle ( +- 0.32% )
79,241,190,850 instructions # 1.74 insn per cycle
# 0.13 stalled cycles per insn ( +- 0.00% )
17,616,096,146 branches # 1339.956 M/sec ( +- 0.00% )
176,106,232 branch-misses # 1.00% of all branches ( +- 0.18% )
13.691078109 seconds time elapsed ( +- 0.03% )
^^^^^^^^^^^^
AFTER
$ perf stat -r 10 taskset -c 3 ./proc-vmstat
Performance counter stats for 'taskset -c 3 ./proc-vmstat' (10 runs):
8688.353749 task-clock (msec) # 0.950 CPUs utilized ( +- 1.25% )
10 context-switches # 0.001 K/sec ( +- 2.13% )
1 cpu-migrations # 0.000 K/sec
104 page-faults # 0.012 K/sec ( +- 0.56% )
30,384,010,730 cycles # 3.497 GHz ( +- 0.07% )
12,296,259,407 stalled-cycles-frontend # 40.47% frontend cycles idle ( +- 0.13% )
3,370,668,651 stalled-cycles-backend # 11.09% backend cycles idle ( +- 0.69% )
28,969,052,879 instructions # 0.95 insn per cycle
# 0.42 stalled cycles per insn ( +- 0.01% )
6,308,245,891 branches # 726.058 M/sec ( +- 0.00% )
214,685,502 branch-misses # 3.40% of all branches ( +- 0.26% )
9.146081052 seconds time elapsed ( +- 0.07% )
^^^^^^^^^^^
vsnprintf() is slow because:
1. format_decode() is busy looking for format specifier: 2 branches
per character (not in this case, but in others)
2. approximately million branches while parsing format mini language
and everywhere
3. just look at what string() does /proc/vmstat is good case because
most of its content are strings
Link: http://lkml.kernel.org/r/20160806125455.GA1187@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.110
x86/boot: Add early cmdline parsing for options with arguments
KAISER: Kernel Address Isolation
kaiser: merged update
kaiser: do not set _PAGE_NX on pgd_none
kaiser: stack map PAGE_SIZE at THREAD_SIZE-PAGE_SIZE
kaiser: fix build and FIXME in alloc_ldt_struct()
kaiser: KAISER depends on SMP
kaiser: fix regs to do_nmi() ifndef CONFIG_KAISER
kaiser: fix perf crashes
kaiser: ENOMEM if kaiser_pagetable_walk() NULL
kaiser: tidied up asm/kaiser.h somewhat
kaiser: tidied up kaiser_add/remove_mapping slightly
kaiser: kaiser_remove_mapping() move along the pgd
kaiser: cleanups while trying for gold link
kaiser: name that 0x1000 KAISER_SHADOW_PGD_OFFSET
kaiser: delete KAISER_REAL_SWITCH option
kaiser: vmstat show NR_KAISERTABLE as nr_overhead
kaiser: enhanced by kernel and user PCIDs
kaiser: load_new_mm_cr3() let SWITCH_USER_CR3 flush user
kaiser: PCID 0 for kernel and 128 for user
kaiser: x86_cr3_pcid_noflush and x86_cr3_pcid_user
kaiser: paranoid_entry pass cr3 need to paranoid_exit
kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls
kaiser: fix unlikely error in alloc_ldt_struct()
kaiser: add "nokaiser" boot option, using ALTERNATIVE
x86/kaiser: Rename and simplify X86_FEATURE_KAISER handling
x86/kaiser: Check boottime cmdline params
kaiser: use ALTERNATIVE instead of x86_cr3_pcid_noflush
kaiser: drop is_atomic arg to kaiser_pagetable_walk()
kaiser: asm/tlbflush.h handle noPGE at lower level
kaiser: kaiser_flush_tlb_on_return_to_user() check PCID
x86/paravirt: Dont patch flush_tlb_single
x86/kaiser: Reenable PARAVIRT
kaiser: disabled on Xen PV
x86/kaiser: Move feature detection up
KPTI: Rename to PAGE_TABLE_ISOLATION
KPTI: Report when enabled
x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
x86/kasan: Clear kasan_zero_page after TLB flush
kaiser: Set _PAGE_NX only if supported
Linux 4.4.110
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The kaiser update made an interesting choice, never to free any shadow
page tables. Contention on global spinlock was worrying, particularly
with it held across page table scans when freeing. Something had to be
done: I was going to add refcounting; but simply never to free them is
an appealing choice, minimizing contention without complicating the code
(the more a page table is found already, the less the spinlock is used).
But leaking pages in this way is also a worry: can we get away with it?
At the very least, we need a count to show how bad it actually gets:
in principle, one might end up wasting about 1/256 of memory that way
(1/512 for when direct-mapped pages have to be user-mapped, plus 1/512
for when they are user-mapped from the vmalloc area on another occasion
(but we don't have vmalloc'ed stacks, so only large ldts are vmalloc'ed).
Add per-cpu stat NR_KAISERTABLE: including 256 at startup for the
shared pgd entries, and 1 for each intermediate page table added
thereafter for user-mapping - but leave out the 1 per mm, for its
shadow pgd, because that distracts from the monotonic increase.
Shown in /proc/vmstat as nr_overhead (0 if kaiser not enabled).
In practice, it doesn't look so bad so far: more like 1/12000 after
nine hours of gtests below; and movable pageblock segregation should
tend to cluster the kaiser tables into a subset of the address space
(if not, they will be bad for compaction too). But production may
tell a different story: keep an eye on this number, and bring back
lighter freeing if it gets out of control (maybe a shrinker).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes in 4.4.108
arm64: Initialise high_memory global variable earlier
cxl: Check if vphb exists before iterating over AFU devices
x86/mm: Add INVPCID helpers
x86/mm: Fix INVPCID asm constraint
x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
x86/mm: If INVPCID is available, use it to flush global mappings
mm/rmap: batched invalidations should use existing api
mm/mmu_context, sched/core: Fix mmu_context.h assumption
sched/core: Add switch_mm_irqs_off() and use it in the scheduler
x86/mm: Build arch/x86/mm/tlb.c even on !SMP
x86/mm, sched/core: Uninline switch_mm()
x86/mm, sched/core: Turn off IRQs in switch_mm()
ARM: Hide finish_arch_post_lock_switch() from modules
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
x86/irq: Do not substract irq_tlb_count from irq_call_count
ALSA: hda - add support for docking station for HP 820 G2
ALSA: hda - add support for docking station for HP 840 G3
arm: kprobes: Fix the return address of multiple kretprobes
arm: kprobes: Align stack to 8-bytes in test code
cpuidle: Validate cpu_dev in cpuidle_add_sysfs()
r8152: fix the list rx_done may be used without initialization
crypto: deadlock between crypto_alg_sem/rtnl_mutex/genl_mutex
sch_dsmark: fix invalid skb_cow() usage
bna: integer overflow bug in debugfs
net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4
usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
usb: gadget: udc: remove pointer dereference after free
netfilter: nfnl_cthelper: fix runtime expectation policy updates
netfilter: nfnl_cthelper: Fix memory leak
inet: frag: release spinlock before calling icmp_send()
pinctrl: st: add irq_request/release_resources callbacks
scsi: lpfc: Fix PT2PT PRLI reject
KVM: x86: correct async page present tracepoint
KVM: VMX: Fix enable VPID conditions
ARM: dts: ti: fix PCI bus dtc warnings
hwmon: (asus_atk0110) fix uninitialized data access
HID: xinmo: fix for out of range for THT 2P arcade controller.
r8152: prevent the driver from transmitting packets with carrier off
s390/qeth: no ETH header for outbound AF_IUCV
bna: avoid writing uninitialized data into hw registers
net: Do not allow negative values for busy_read and busy_poll sysctl interfaces
i40e: Do not enable NAPI on q_vectors that have no rings
RDMA/iser: Fix possible mr leak on device removal event
irda: vlsi_ir: fix check for DMA mapping errors
netfilter: nfnl_cthelper: fix a race when walk the nf_ct_helper_hash table
netfilter: nf_nat_snmp: Fix panic when snmp_trap_helper fails to register
ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
KVM: pci-assign: do not map smm memory slot pages in vt-d page tables
isdn: kcapi: avoid uninitialized data
xhci: plat: Register shutdown for xhci_plat
netfilter: nfnetlink_queue: fix secctx memory leak
ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory
cpuidle: powernv: Pass correct drv->cpumask for registration
bnxt_en: Fix NULL pointer dereference in reopen failure path
backlight: pwm_bl: Fix overflow condition
crypto: crypto4xx - increase context and scatter ring buffer elements
rtc: pl031: make interrupt optional
net: phy: at803x: Change error to EINVAL for invalid MAC
PCI: Avoid bus reset if bridge itself is broken
scsi: cxgb4i: fix Tx skb leak
scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive
PCI: Create SR-IOV virtfn/physfn links before attaching driver
igb: check memory allocation failure
ixgbe: fix use of uninitialized padding
PCI/AER: Report non-fatal errors only to the affected endpoint
scsi: lpfc: Fix secure firmware updates
scsi: lpfc: PLOGI failures during NPIV testing
fm10k: ensure we process SM mbx when processing VF mbx
tcp: fix under-evaluated ssthresh in TCP Vegas
rtc: set the alarm to the next expiring timer
cpuidle: fix broadcast control when broadcast can not be entered
thermal: hisilicon: Handle return value of clk_prepare_enable
MIPS: math-emu: Fix final emulation phase for certain instructions
Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"
ALSA: hda - Clear the leftover component assignment at snd_hdac_i915_exit()
ALSA: hda - Degrade i915 binding failure message
ALSA: hda - Fix yet another i915 pointer leftover in error path
alpha: fix build failures
Linux 4.4.108
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit 8efd755ac2fe262d4c8d5c9bbe054bb67dae93da upstream.
Some architectures (such as Alpha) rely on include/linux/sched.h definitions
in their mmu_context.h files.
So include sched.h before mmu_context.h.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 858eaaa711700ce4595e039441e239e56d7b9514 upstream.
The recently introduced batched invalidations mechanism uses its own
mechanism for shootdown. However, it does wrong accounting of
interrupts (e.g., inc_irq_stat is called for local invalidations),
trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and
may break some platforms as it bypasses the invalidation mechanisms of
Xen and SGI UV.
This patch reuses the existing TLB flushing mechnaisms instead. We use
NULL as mm to indicate a global invalidation is required.
Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kcov provides code coverage collection for coverage-guided fuzzing
(randomized testing). Coverage-guided fuzzing is a testing technique
that uses coverage feedback to determine new interesting inputs to a
system. A notable user-space example is AFL
(http://lcamtuf.coredump.cx/afl/). However, this technique is not
widely used for kernel testing due to missing compiler and kernel
support.
kcov does not aim to collect as much coverage as possible. It aims to
collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard
interrupts and instrumentation of some inherently non-deterministic or
non-interesting parts of kernel is disbled (e.g. scheduler, locking).
Currently there is a single coverage collection mode (tracing), but the
API anticipates additional collection modes. Initially I also
implemented a second mode which exposes coverage in a fixed-size hash
table of counters (what Quentin used in his original patch). I've
dropped the second mode for simplicity.
This patch adds the necessary support on kernel side. The complimentary
compiler support was added in gcc revision 231296.
We've used this support to build syzkaller system call fuzzer, which has
found 90 kernel bugs in just 2 months:
https://github.com/google/syzkaller/wiki/Found-Bugs
We've also found 30+ bugs in our internal systems with syzkaller.
Another (yet unexplored) direction where kcov coverage would greatly
help is more traditional "blob mutation". For example, mounting a
random blob as a filesystem, or receiving a random blob over wire.
Why not gcov. Typical fuzzing loop looks as follows: (1) reset
coverage, (2) execute a bit of code, (3) collect coverage, repeat. A
typical coverage can be just a dozen of basic blocks (e.g. an invalid
input). In such context gcov becomes prohibitively expensive as
reset/collect coverage steps depend on total number of basic
blocks/edges in program (in case of kernel it is about 2M). Cost of
kcov depends only on number of executed basic blocks/edges. On top of
that, kernel requires per-thread coverage because there are always
background threads and unrelated processes that also produce coverage.
With inlined gcov instrumentation per-thread coverage is not possible.
kcov exposes kernel PCs and control flow to user-space which is
insecure. But debugfs should not be mapped as user accessible.
Based on a patch by Quentin Casasnovas.
[akpm@linux-foundation.org: make task_struct.kcov_mode have type `enum kcov_mode']
[akpm@linux-foundation.org: unbreak allmodconfig]
[akpm@linux-foundation.org: follow x86 Makefile layout standards]
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Drysdale <drysdale@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 5c9a8750a6409c63a0f01d51a9024861022f6593)
Change-Id: I17b5e04f6e89b241924e78ec32ead79c38b860ce
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Changes in 4.4.106
can: ti_hecc: Fix napi poll return value for repoll
can: kvaser_usb: free buf in error paths
can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
can: kvaser_usb: ratelimit errors if incomplete messages are received
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
virtio: release virtio index when fail to device_register
hv: kvp: Avoid reading past allocated blocks from KVP file
isa: Prevent NULL dereference in isa_bus driver callbacks
scsi: libsas: align sata_device's rps_resp on a cacheline
efi: Move some sysfs files to be read-only by root
ASN.1: fix out-of-bounds read when parsing indefinite length item
ASN.1: check for error from ASN1_OP_END__ACT actions
X.509: reject invalid BIT STRING for subjectPublicKey
x86/PCI: Make broadcom_postcore_init() check acpi_disabled
ALSA: pcm: prevent UAF in snd_pcm_info
ALSA: seq: Remove spurious WARN_ON() at timer check
ALSA: usb-audio: Fix out-of-bound error
ALSA: usb-audio: Add check return value for usb_string()
iommu/vt-d: Fix scatterlist offset handling
s390: fix compat system call table
kdb: Fix handling of kallsyms_symbol_next() return value
drm: extra printk() wrapper macros
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
media: dvb: i2c transfers over usb cannot be done from stack
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
arm64: fpsimd: Prevent registers leaking from dead tasks
ARM: BUG if jumping to usermode address in kernel mode
ARM: avoid faulting on qemu
scsi: storvsc: Workaround for virtual DVD SCSI version
thp: reduce indentation level in change_huge_pmd()
thp: fix MADV_DONTNEED vs. numa balancing race
mm: drop unused pmdp_huge_get_and_clear_notify()
Revert "drm/armada: Fix compile fail"
Revert "spi: SPI_FSL_DSPI should depend on HAS_DMA"
Revert "s390/kbuild: enable modversions for symbols exported from asm"
vti6: Don't report path MTU below IPV6_MIN_MTU.
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
x86/hpet: Prevent might sleep splat on resume
selftest/powerpc: Fix false failures for skipped tests
module: set __jump_table alignment to 8
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Release device node after it is no longer needed.
gpio: altera: Use handle_level_irq when configured as a level_high
HID: chicony: Add support for another ASUS Zen AiO keyboard
usb: gadget: configs: plug memory leak
USB: gadgetfs: Fix a potential memory leak in 'dev_config()'
kvm: nVMX: VMCLEAR should not cause the vCPU to shut down
libata: drop WARN from protocol error in ata_sff_qc_issue()
workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters
irqchip/crossbar: Fix incorrect type of register size
KVM: nVMX: reset nested_run_pending if the vCPU is going to be reset
arm: KVM: Survive unknown traps from guests
arm64: KVM: Survive unknown traps from guests
spi_ks8995: fix "BUG: key accdaa28 not in .data!"
bnx2x: prevent crash when accessing PTP with interface down
bnx2x: fix possible overrun of VFPF multicast addresses array
bnx2x: do not rollback VF MAC/VLAN filters we did not configure
ipv6: reorder icmpv6_init() and ip6_mr_init()
crypto: s5p-sss - Fix completing crypto request in IRQ handler
i2c: riic: fix restart condition
zram: set physical queue limits to avoid array out of bounds accesses
netfilter: don't track fragmented packets
axonram: Fix gendisk handling
drm/amd/amdgpu: fix console deadlock if late init failed
powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requested
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
EDAC, i5000, i5400: Fix definition of NRECMEMB register
kbuild: pkg: use --transform option to prefix paths in tar
mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
route: also update fnhe_genid when updating a route cache
route: update fnhe_expires for redirect when the fnhe exists
lib/genalloc.c: make the avail variable an atomic_long_t
dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
NFS: Fix a typo in nfs_rename()
sunrpc: Fix rpc_task_begin trace point
block: wake up all tasks blocked in get_request()
sparc64/mm: set fields in deferred pages
sctp: do not free asoc when it is already dead in sctp_sendmsg
sctp: use the right sk after waking up from wait_buf sleep
atm: horizon: Fix irq release error
jump_label: Invoke jump_label_test() via early_initcall()
xfrm: Copy policy family in clone_policy
IB/mlx4: Increase maximal message size under UD QP
IB/mlx5: Assign send CQ and recv CQ of UMR QP
afs: Connect up the CB.ProbeUuid
ipvlan: fix ipv6 outbound device
audit: ensure that 'audit=1' actually enables audit for PID 1
ipmi: Stop timers before cleaning up the module
s390: always save and restore all registers on context switch
more bio_map_user_iov() leak fixes
tipc: fix memory leak in tipc_accept_from_sock()
rds: Fix NULL pointer dereference in __rds_rdma_map
sit: update frag_off info
packet: fix crash in fanout_demux_rollover()
net/packet: fix a race in packet_bind() and packet_notifier()
Revert "x86/efi: Build our own page table structures"
Revert "x86/efi: Hoist page table switching code into efi_call_virt()"
Revert "x86/mm/pat: Ensure cpa->pfn only contains page frame numbers"
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
Linux 4.4.106
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
commit ced108037c2aa542b3ed8b7afd1576064ad1362a upstream.
In case prot_numa, we are under down_read(mmap_sem). It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):
CPU0: CPU1:
change_huge_pmd(prot_numa=1)
pmdp_huge_get_and_clear_notify()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established
The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.
Found by code analysis, never saw triggered.
Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.4]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a85e51d37645e9ce57e5e1a30859e07810ed07c upstream.
Patch series "thp: fix few MADV_DONTNEED races"
For MADV_DONTNEED to work properly with huge pages, it's critical to not
clear pmd intermittently unless you hold down_write(mmap_sem).
Otherwise MADV_DONTNEED can miss the THP which can lead to userspace
breakage.
See example of such race in commit message of patch 2/4.
All these races are found by code inspection. I haven't seen them
triggered. I don't think it's worth to apply them to stable@.
This patch (of 4):
Restructure code in preparation for a fix.
Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[jwang: adjust context for 4.4 kernel]
Signed-off-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The helper function get_wild_bug_type() does not need to be in global
scope, so make it static.
Cleans up sparse warning:
"symbol 'get_wild_bug_type' was not declared. Should it be static?"
Link: http://lkml.kernel.org/r/20170622090049.10658-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 822d5ec25884b4e4436c819d03035fc0dd689309)
Change-Id: If89c8ba8ee3bdb0db7ecb67e773bfbf3179514f3
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Makes the report easier to read.
Link: http://lkml.kernel.org/r/20170302134851.101218-10-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b19385993623c1a18a686b6b271cd24d5aa96f52)
Change-Id: I8cc010a73e257cb08c7a2537d7aabd3c9c2c8116
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Changes double-free report header from
BUG: Double free or freeing an invalid pointer
Unexpected shadow byte: 0xFB
to
BUG: KASAN: double-free or invalid-free in kmalloc_oob_left+0xe5/0xef
This makes a bug uniquely identifiable by the first report line. To
account for removing of the unexpected shadow value, print shadow bytes
at the end of the report as in reports for other kinds of bugs.
Link: http://lkml.kernel.org/r/20170302134851.101218-9-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 5ab6d91ac998158d04f9563335aa5f1409eda971)
Change-Id: I02dee92190216601d65866eb1c27f7381a22b0da
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Moves page description after the stacks since it's less important.
Link: http://lkml.kernel.org/r/20170302134851.101218-8-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 430a05f91d6051705a6ddbe207735ca62e39bb80)
Change-Id: Ia20b7d6cf5602531072e9bd4fd478737f8623db1
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Changes slab object description from:
Object at ffff880068388540, in cache kmalloc-128 size: 128
to:
The buggy address belongs to the object at ffff880068388540
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 123 bytes inside of
128-byte region [ffff880068388540, ffff8800683885c0)
Makes it more explanatory and adds information about relative offset of
the accessed address to the start of the object.
Link: http://lkml.kernel.org/r/20170302134851.101218-7-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 0c06f1f86c87b1eb93420effe0c0457b30911360)
Change-Id: I23928984dbe5a614b84c57e42b20ec13e7c739a4
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Change report header format from:
BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0 at addr ffff880069437950
Read of size 8 by task insmod/3925
to:
BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0
Read of size 8 at addr ffff880069437950 by task insmod/3925
The exact access address is not usually important, so move it to the
second line. This also makes the header look visually balanced.
Link: http://lkml.kernel.org/r/20170302134851.101218-6-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 7f0a84c23b1dede3e76a7b2ebbde45a506252005)
Change-Id: If9cacce637c317538d813b05ef2647707300d310
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Simplify logic for describing a memory address. Add addr_to_page()
helper function.
Makes the code easier to follow.
Link: http://lkml.kernel.org/r/20170302134851.101218-5-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from db429f16e0b472292000fd53b63ebd7221a9856e)
Change-Id: Ie688a8fe0da5d1012e64bdbd26b5e7cb2ed43ff8
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Change stack traces headers from:
Allocated:
PID = 42
to:
Allocated by task 42:
Makes the report one line shorter and look better.
Link: http://lkml.kernel.org/r/20170302134851.101218-4-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b6b72f4919c121bee5890732e0b8de2ab99c8dbc)
Change-Id: Iab66777f16016b5a3a8ce85f7cc62d4572fcf5b0
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Unify KASAN report header format for different kinds of bad memory
accesses. Makes the code simpler.
Link: http://lkml.kernel.org/r/20170302134851.101218-3-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 7d418f7b0d3407b93ec70f3b380cc5beafa1fa68)
Change-Id: I81577ad4617e8c4624fc0701f45a197d211f12a6
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Patch series "kasan: improve error reports", v2.
This patchset improves KASAN reports by making them easier to read and a
little more detailed. Also improves mm/kasan/report.c readability.
Effectively changes a use-after-free report to:
==================================================================
BUG: KASAN: use-after-free in kmalloc_uaf+0xaa/0xb6 [test_kasan]
Write of size 1 at addr ffff88006aa59da8 by task insmod/3951
CPU: 1 PID: 3951 Comm: insmod Tainted: G B 4.10.0+ #84
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x292/0x398
print_address_description+0x73/0x280
kasan_report.part.2+0x207/0x2f0
__asan_report_store1_noabort+0x2c/0x30
kmalloc_uaf+0xaa/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x7f22cfd0b9da
RSP: 002b:00007ffe69118a78 EFLAGS: 00000206 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 0000555671242090 RCX: 00007f22cfd0b9da
RDX: 00007f22cffcaf88 RSI: 000000000004df7e RDI: 00007f22d0399000
RBP: 00007f22cffcaf88 R08: 0000000000000003 R09: 0000000000000000
R10: 00007f22cfd07d0a R11: 0000000000000206 R12: 0000555671243190
R13: 000000000001fe81 R14: 0000000000000000 R15: 0000000000000004
Allocated by task 3951:
save_stack_trace+0x16/0x20
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kmem_cache_alloc_trace+0x82/0x270
kmalloc_uaf+0x56/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc2
Freed by task 3951:
save_stack_trace+0x16/0x20
save_stack+0x43/0xd0
kasan_slab_free+0x72/0xc0
kfree+0xe8/0x2b0
kmalloc_uaf+0x85/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc
The buggy address belongs to the object at ffff88006aa59da0
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 8 bytes inside of
16-byte region [ffff88006aa59da0, ffff88006aa59db0)
The buggy address belongs to the page:
page:ffffea0001aa9640 count:1 mapcount:0 mapping: (null) index:0x0
flags: 0x100000000000100(slab)
raw: 0100000000000100 0000000000000000 0000000000000000 0000000180800080
raw: ffffea0001abe380 0000000700000007 ffff88006c401b40 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88006aa59c80: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc
ffff88006aa59d00: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc
>ffff88006aa59d80: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
^
ffff88006aa59e00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
ffff88006aa59e80: fb fb fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc
==================================================================
from:
==================================================================
BUG: KASAN: use-after-free in kmalloc_uaf+0xaa/0xb6 [test_kasan] at addr ffff88006c4dcb28
Write of size 1 by task insmod/3984
CPU: 1 PID: 3984 Comm: insmod Tainted: G B 4.10.0+ #83
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x292/0x398
kasan_object_err+0x1c/0x70
kasan_report.part.1+0x20e/0x4e0
__asan_report_store1_noabort+0x2c/0x30
kmalloc_uaf+0xaa/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x7feca0f779da
RSP: 002b:00007ffdfeae5218 EFLAGS: 00000206 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 000055a064c13090 RCX: 00007feca0f779da
RDX: 00007feca1236f88 RSI: 000000000004df7e RDI: 00007feca1605000
RBP: 00007feca1236f88 R08: 0000000000000003 R09: 0000000000000000
R10: 00007feca0f73d0a R11: 0000000000000206 R12: 000055a064c14190
R13: 000000000001fe81 R14: 0000000000000000 R15: 0000000000000004
Object at ffff88006c4dcb20, in cache kmalloc-16 size: 16
Allocated:
PID = 3984
save_stack_trace+0x16/0x20
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kmem_cache_alloc_trace+0x82/0x270
kmalloc_uaf+0x56/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc2
Freed:
PID = 3984
save_stack_trace+0x16/0x20
save_stack+0x43/0xd0
kasan_slab_free+0x73/0xc0
kfree+0xe8/0x2b0
kmalloc_uaf+0x85/0xb6 [test_kasan]
kmalloc_tests_init+0x4f/0xa48 [test_kasan]
do_one_initcall+0xf3/0x390
do_init_module+0x215/0x5d0
load_module+0x54de/0x82b0
SYSC_init_module+0x3be/0x430
SyS_init_module+0x9/0x10
entry_SYSCALL_64_fastpath+0x1f/0xc2
Memory state around the buggy address:
ffff88006c4dca00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
ffff88006c4dca80: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
>ffff88006c4dcb00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
^
ffff88006c4dcb80: fb fb fc fc 00 00 fc fc fb fb fc fc fb fb fc fc
ffff88006c4dcc00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc
==================================================================
This patch (of 9):
Introduce get_shadow_bug_type() function, which determines bug type
based on the shadow value for a particular kernel address. Introduce
get_wild_bug_type() function, which determines bug type for addresses
which don't have a corresponding shadow value.
Link: http://lkml.kernel.org/r/20170302134851.101218-2-andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 5e82cd120382ad7bbcc82298e34a034538b4384c)
Change-Id: I3359775858891c9c66d11d2a520831e329993ae9
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b0845ce58379d11dcad4cdb6824a6410de260216)
Change-Id: Ia8c6d40dd0d4f5b944bf3501c08d7a825070b116
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
quarantine_remove_cache() frees all pending objects that belong to the
cache, before we destroy the cache itself. However there are currently
two possibilities how it can fail to do so.
First, another thread can hold some of the objects from the cache in
temp list in quarantine_put(). quarantine_put() has a windows of
enabled interrupts, and on_each_cpu() in quarantine_remove_cache() can
finish right in that window. These objects will be later freed into the
destroyed cache.
Then, quarantine_reduce() has the same problem. It grabs a batch of
objects from the global quarantine, then unlocks quarantine_lock and
then frees the batch. quarantine_remove_cache() can finish while some
objects from the cache are still in the local to_free list in
quarantine_reduce().
Fix the race with quarantine_put() by disabling interrupts for the whole
duration of quarantine_put(). In combination with on_each_cpu() in
quarantine_remove_cache() it ensures that quarantine_remove_cache()
either sees the objects in the per-cpu list or in the global list.
Fix the race with quarantine_reduce() by protecting quarantine_reduce()
with srcu critical section and then doing synchronize_srcu() at the end
of quarantine_remove_cache().
I've done some assessment of how good synchronize_srcu() works in this
case. And on a 4 CPU VM I see that it blocks waiting for pending read
critical sections in about 2-3% of cases. Which looks good to me.
I suspect that these races are the root cause of some GPFs that I
episodically hit. Previously I did not have any explanation for them.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
IP: qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
PGD 6aeea067
PUD 60ed7067
PMD 0
Oops: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 13667 Comm: syz-executor2 Not tainted 4.10.0+ #60
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88005f948040 task.stack: ffff880069818000
RIP: 0010:qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
RSP: 0018:ffff88006981f298 EFLAGS: 00010246
RAX: ffffea0000ffff00 RBX: 0000000000000000 RCX: ffffea0000ffff1f
RDX: 0000000000000000 RSI: ffff88003fffc3e0 RDI: 0000000000000000
RBP: ffff88006981f2c0 R08: ffff88002fed7bd8 R09: 00000001001f000d
R10: 00000000001f000d R11: ffff88006981f000 R12: ffff88003fffc3e0
R13: ffff88006981f2d0 R14: ffffffff81877fae R15: 0000000080000000
FS: 00007fb911a2d700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c8 CR3: 0000000060ed6000 CR4: 00000000000006f0
Call Trace:
quarantine_reduce+0x10e/0x120 mm/kasan/quarantine.c:239
kasan_kmalloc+0xca/0xe0 mm/kasan/kasan.c:590
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
slab_post_alloc_hook mm/slab.h:456 [inline]
slab_alloc_node mm/slub.c:2718 [inline]
kmem_cache_alloc_node+0x1d3/0x280 mm/slub.c:2754
__alloc_skb+0x10f/0x770 net/core/skbuff.c:219
alloc_skb include/linux/skbuff.h:932 [inline]
_sctp_make_chunk+0x3b/0x260 net/sctp/sm_make_chunk.c:1388
sctp_make_data net/sctp/sm_make_chunk.c:1420 [inline]
sctp_make_datafrag_empty+0x208/0x360 net/sctp/sm_make_chunk.c:746
sctp_datamsg_from_user+0x7e8/0x11d0 net/sctp/chunk.c:266
sctp_sendmsg+0x2611/0x3970 net/sctp/socket.c:1962
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x660/0x810 net/socket.c:1685
SyS_sendto+0x40/0x50 net/socket.c:1653
I am not sure about backporting. The bug is quite hard to trigger, I've
seen it few times during our massive continuous testing (however, it
could be cause of some other episodic stray crashes as it leads to
memory corruption...). If it is triggered, the consequences are very
bad -- almost definite bad memory corruption. The fix is non trivial
and has chances of introducing new bugs. I am also not sure how
actively people use KASAN on older releases.
[dvyukov@google.com: - sorted includes[
Link: http://lkml.kernel.org/r/20170309094028.51088-1-dvyukov@google.com
Link: http://lkml.kernel.org/r/20170308151532.5070-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from ce5bec54bb5debbbe51b40270d8f209a23cadae4)
Change-Id: I9199861f005d7932c37397b3ae23a123a4cff89b
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
We see reported stalls/lockups in quarantine_remove_cache() on machines
with large amounts of RAM. quarantine_remove_cache() needs to scan
whole quarantine in order to take out all objects belonging to the
cache. Quarantine is currently 1/32-th of RAM, e.g. on a machine with
256GB of memory that will be 8GB. Moreover quarantine scanning is a
walk over uncached linked list, which is slow.
Add cond_resched() after scanning of each non-empty batch of objects.
Batches are specifically kept of reasonable size for quarantine_put().
On a machine with 256GB of RAM we should have ~512 non-empty batches,
each with 16MB of objects.
Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 68fd814a3391c7e017ae6ace8855788748edd981)
Change-Id: I8a38466a9b9544bb303202c94bfba6201251e3f3
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
<linux/kasan.h> is a low level header that is included early
in affected kernel headers. But it includes <linux/sched.h>
which complicates the cleanup of sched.h dependencies.
But kasan.h has almost no need for sched.h: its only use of
scheduler functionality is in two inline functions which are
not used very frequently - so uninline kasan_enable_current()
and kasan_disable_current().
Also add a <linux/sched.h> dependency to a .c file that depended
on kasan.h including it.
This paves the way to remove the <linux/sched.h> include from kasan.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 64145065
(cherry-picked from af8601ad420f6afa6445c927ad9f36d9700d96d6)
Change-Id: I13fd2d3927f663d694ea0d5bf44f18e2c62ae013
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Per memcg slab accounting and kasan have a problem with kmem_cache
destruction.
- kmem_cache_create() allocates a kmem_cache, which is used for
allocations from processes running in root (top) memcg.
- Processes running in non root memcg and allocating with either
__GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg
kmem_cache.
- Kasan catches use-after-free by having kfree() and kmem_cache_free()
defer freeing of objects. Objects are placed in a quarantine.
- kmem_cache_destroy() destroys root and non root kmem_caches. It takes
care to drain the quarantine of objects from the root memcg's
kmem_cache, but ignores objects associated with non root memcg. This
causes leaks because quarantined per memcg objects refer to per memcg
kmem cache being destroyed.
To see the problem:
1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,)
2) from non root memcg, allocate and free a few objects from cache
3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy()
will trigger a "Slab cache still has objects" warning indicating
that the per memcg kmem_cache structure was leaked.
Fix the leak by draining kasan quarantined objects allocated from non
root memcg.
Racing memcg deletion is tricky, but handled. kmem_cache_destroy() =>
shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache()
flushes per memcg quarantined objects, even if that memcg has been
rmdir'd and gone through memcg_deactivate_kmem_caches().
This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is
enabled. So I don't think it's worth patching stable kernels.
Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from f9fa1d919c696e90c887d8742198023e7639d139)
Change-Id: Ie054d9cde7fb1ce62e65776bff5a70f72925d037
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Currently we dedicate 1/32 of RAM for quarantine and then reduce it by
1/4 of total quarantine size. This can be a significant amount of
memory. For example, with 4GB of RAM total quarantine size is 128MB and
it is reduced by 32MB at a time. With 128GB of RAM total quarantine
size is 4GB and it is reduced by 1GB. This leads to several problems:
- freeing 1GB can take tens of seconds, causes rcu stall warnings and
just introduces unexpected long delays at random places
- if kmalloc() is called under a mutex, other threads stall on that
mutex while a thread reduces quarantine
- threads wait on quarantine_lock while one thread grabs a large batch
of objects to evict
- we walk the uncached list of object to free twice which makes all of
the above worse
- when a thread frees objects, they are already not accounted against
global_quarantine.bytes; as the result we can have quarantine_size
bytes in quarantine + unbounded amount of memory in large batches in
threads that are in process of freeing
Reduce size of quarantine in smaller batches to reduce the delays. The
only reason to reduce it in batches is amortization of overheads, the
new batch size of 1MB should be well enough to amortize spinlock
lock/unlock and few function calls.
Plus organize quarantine as a FIFO array of batches. This allows to not
walk the list in quarantine_reduce() under quarantine_lock, which in
turn reduces contention and is just faster.
This improves performance of heavy load (syzkaller fuzzing) by ~20% with
4 CPUs and 32GB of RAM. Also this eliminates frequent (every 5 sec)
drops of CPU consumption from ~400% to ~100% (one thread reduces
quarantine while others are waiting on a mutex).
Some reference numbers:
1. Machine with 4 CPUs and 4GB of memory. Quarantine size 128MB.
Currently we free 32MB at at time.
With new code we free 1MB at a time (1024 batches, ~128 are used).
2. Machine with 32 CPUs and 128GB of memory. Quarantine size 4GB.
Currently we free 1GB at at time.
With new code we free 8MB at a time (1024 batches, ~512 are used).
3. Machine with 4096 CPUs and 1TB of memory. Quarantine size 32GB.
Currently we free 8GB at at time.
With new code we free 4MB at a time (16K batches, ~8K are used).
Link: http://lkml.kernel.org/r/1478756952-18695-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 64abdcb24351a27bed6e2b6a3c27348fe532c73f)
Change-Id: Idf73cb292453ceffc437121b7a5e152cde1901ff
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
If user sets panic_on_warn, he wants kernel to panic if there is
anything barely wrong with the kernel. KASAN-detected errors are
definitely not less benign than an arbitrary kernel WARNING.
Panic after KASAN errors if panic_on_warn is set.
We use this for continuous fuzzing where we want kernel to stop and
reboot on any error.
Link: http://lkml.kernel.org/r/1476694764-31986-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 5c5c1f36cedfb51ec291181e71817f7fe7e03ee2)
Change-Id: Iee7cbc4ffbce8eb8d827447fdf960a6520d10b00
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Resuming from a suspend operation is showing a KASAN false positive
warning:
BUG: KASAN: stack-out-of-bounds in unwind_get_return_address+0x11d/0x130 at addr ffff8803867d7878
Read of size 8 by task pm-suspend/7774
page:ffffea000e19f5c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x2ffff0000000000()
page dumped because: kasan: bad access detected
CPU: 0 PID: 7774 Comm: pm-suspend Tainted: G B 4.9.0-rc7+ #8
Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016
Call Trace:
dump_stack+0x63/0x82
kasan_report_error+0x4b4/0x4e0
? acpi_hw_read_port+0xd0/0x1ea
? kfree_const+0x22/0x30
? acpi_hw_validate_io_request+0x1a6/0x1a6
__asan_report_load8_noabort+0x61/0x70
? unwind_get_return_address+0x11d/0x130
unwind_get_return_address+0x11d/0x130
? unwind_next_frame+0x97/0xf0
__save_stack_trace+0x92/0x100
save_stack_trace+0x1b/0x20
save_stack+0x46/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kasan_slab_alloc+0x12/0x20
? acpi_hw_read+0x2b6/0x3aa
? acpi_hw_validate_register+0x20b/0x20b
? acpi_hw_write_port+0x72/0xc7
? acpi_hw_write+0x11f/0x15f
? acpi_hw_read_multiple+0x19f/0x19f
? memcpy+0x45/0x50
? acpi_hw_write_port+0x72/0xc7
? acpi_hw_write+0x11f/0x15f
? acpi_hw_read_multiple+0x19f/0x19f
? kasan_unpoison_shadow+0x36/0x50
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc_trace+0xbc/0x1e0
? acpi_get_sleep_type_data+0x9a/0x578
acpi_get_sleep_type_data+0x9a/0x578
acpi_hw_legacy_wake_prep+0x88/0x22c
? acpi_hw_legacy_sleep+0x3c7/0x3c7
? acpi_write_bit_register+0x28d/0x2d3
? acpi_read_bit_register+0x19b/0x19b
acpi_hw_sleep_dispatch+0xb5/0xba
acpi_leave_sleep_state_prep+0x17/0x19
acpi_suspend_enter+0x154/0x1e0
? trace_suspend_resume+0xe8/0xe8
suspend_devices_and_enter+0xb09/0xdb0
? printk+0xa8/0xd8
? arch_suspend_enable_irqs+0x20/0x20
? try_to_freeze_tasks+0x295/0x600
pm_suspend+0x6c9/0x780
? finish_wait+0x1f0/0x1f0
? suspend_devices_and_enter+0xdb0/0xdb0
state_store+0xa2/0x120
? kobj_attr_show+0x60/0x60
kobj_attr_store+0x36/0x70
sysfs_kf_write+0x131/0x200
kernfs_fop_write+0x295/0x3f0
__vfs_write+0xef/0x760
? handle_mm_fault+0x1346/0x35e0
? do_iter_readv_writev+0x660/0x660
? __pmd_alloc+0x310/0x310
? do_lock_file_wait+0x1e0/0x1e0
? apparmor_file_permission+0x18/0x20
? security_file_permission+0x73/0x1c0
? rw_verify_area+0xbd/0x2b0
vfs_write+0x149/0x4a0
SyS_write+0xd9/0x1c0
? SyS_read+0x1c0/0x1c0
entry_SYSCALL_64_fastpath+0x1e/0xad
Memory state around the buggy address:
ffff8803867d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8803867d7780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8803867d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f4
^
ffff8803867d7880: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
ffff8803867d7900: 00 00 00 f1 f1 f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00
KASAN instrumentation poisons the stack when entering a function and
unpoisons it when exiting the function. However, in the suspend path,
some functions never return, so their stack never gets unpoisoned,
resulting in stale KASAN shadow data which can cause later false
positive warnings like the one above.
Reported-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bug: 64145065
(cherry-picked from b53f40db59b27b62bc294c30506b02a0cae47e0b)
Change-Id: Iafbf1f7f19bb7db9a49316cf70050a3dae576f15
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Gcc revision 241896 implements use-after-scope detection. Will be
available in gcc 7. Support it in KASAN.
Gcc emits 2 new callbacks to poison/unpoison large stack objects when
they go in/out of scope. Implement the callbacks and add a test.
[dvyukov@google.com: v3]
Link: http://lkml.kernel.org/r/1479998292-144502-1-git-send-email-dvyukov@google.com
Link: http://lkml.kernel.org/r/1479226045-145148-1-git-send-email-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 828347f8f9a558cf1af2faa46387a26564f2ac3e)
Change-Id: Ib9cb585efbe98ba11a7efbd233ebd97cb4214a92
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
I observed false KSAN positives in the sctp code, when
sctp uses jprobe_return() in jsctp_sf_eat_sack().
The stray 0xf4 in shadow memory are stack redzones:
[ ] ==================================================================
[ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480
[ ] Read of size 1 by task syz-executor/18535
[ ] page:ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0
[ ] flags: 0x1fffc0000000000()
[ ] page dumped because: kasan: bad access detected
[ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28
[ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ ] ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8
[ ] ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000
[ ] ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370
[ ] Call Trace:
[ ] [<ffffffff82d2b849>] dump_stack+0x12e/0x185
[ ] [<ffffffff817d3169>] kasan_report+0x489/0x4b0
[ ] [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20
[ ] [<ffffffff82d49529>] memcmp+0xe9/0x150
[ ] [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0
[ ] [<ffffffff817d2031>] save_stack+0xb1/0xd0
[ ] [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0
[ ] [<ffffffff817d05b8>] kfree+0xc8/0x2a0
[ ] [<ffffffff85b03f19>] skb_free_head+0x79/0xb0
[ ] [<ffffffff85b0900a>] skb_release_data+0x37a/0x420
[ ] [<ffffffff85b090ff>] skb_release_all+0x4f/0x60
[ ] [<ffffffff85b11348>] consume_skb+0x138/0x370
[ ] [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180
[ ] [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70
[ ] [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0
[ ] [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0
[ ] [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190
[ ] [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20
[ ... ]
[ ] Memory state around the buggy address:
[ ] ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ^
[ ] ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ ] ==================================================================
KASAN stack instrumentation poisons stack redzones on function entry
and unpoisons them on function exit. If a function exits abnormally
(e.g. with a longjmp like jprobe_return()), stack redzones are left
poisoned. Later this leads to random KASAN false reports.
Unpoison stack redzones in the frames we are going to jump over
before doing actual longjmp in jprobe_return().
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: kasan-dev@googlegroups.com
Cc: surovegin@google.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1476454043-101898-1-git-send-email-dvyukov@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bug: 64145065
(cherry-picked from 9f7d416c36124667c406978bcb39746589c35d7f)
Change-Id: I84e4fac44265a69f615601266b3415147dade633
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
It's quite unlikely that the user will so little memory that the per-CPU
quarantines won't fit into the given fraction of the available memory.
Even in that case he won't be able to do anything with the information
given in the warning.
Link: http://lkml.kernel.org/r/1470929182-101413-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from bcbf0d566b6e59a6e873bfe415cc415111a819e2)
Change-Id: I1230018140c32fab7ea1d1dc1d54471aa48ae45f
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
If the total amount of memory assigned to quarantine is less than the
amount of memory assigned to per-cpu quarantines, |new_quarantine_size|
may overflow. Instead, set it to zero.
[akpm@linux-foundation.org: cleanup: use WARN_ONCE return value]
Link: http://lkml.kernel.org/r/1470063563-96266-1-git-send-email-glider@google.com
Fixes: 55834c59098d ("mm: kasan: initial memory quarantine implementation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from c3cee372282cb6bcdf19ac1457581d5dd5ecb554)
Change-Id: I8a647e5ee5d9494698aa2a31d50d587d6ff8b65c
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Currently we just dump stack in case of double free bug.
Let's dump all info about the object that we have.
[aryabinin@virtuozzo.com: change double free message per Alexander]
Link: http://lkml.kernel.org/r/1470153654-30160-1-git-send-email-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/1470062715-14077-6-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 7e088978933ee186533355ae03a9dc1de99cf6c7)
Change-Id: I733bf6272d44597907bcf01f1d13695b8e9f8cb4
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Kernel style prefers a single string over split strings when the string is
'user-visible'.
Miscellanea:
- Add a missing newline
- Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Tejun Heo <tj@kernel.org> [percpu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 756a025f00091918d9d09ca3229defb160b409c0)
Change-Id: I377fb1542980c15d2f306924656227ad17b02b5e
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
The state of object currently tracked in two places - shadow memory, and
the ->state field in struct kasan_alloc_meta. We can get rid of the
latter. The will save us a little bit of memory. Also, this allow us
to move free stack into struct kasan_alloc_meta, without increasing
memory consumption. So now we should always know when the last time the
object was freed. This may be useful for long delayed use-after-free
bugs.
As a side effect this fixes following UBSAN warning:
UBSAN: Undefined behaviour in mm/kasan/quarantine.c:102:13
member access within misaligned address ffff88000d1efebc for type 'struct qlist_node'
which requires 8 byte alignment
Link: http://lkml.kernel.org/r/1470062715-14077-5-git-send-email-aryabinin@virtuozzo.com
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from b3cbd9bf77cd1888114dbee1653e79aa23fd4068)
Change-Id: Iaa4959a78ffd2e49f9060099df1fb32483df3085
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
|
Size of slab object already stored in cache->object_size.
Note, that kmalloc() internally rounds up size of allocation, so
object_size may be not equal to alloc_size, but, usually we don't need
to know the exact size of allocated object. In case if we need that
information, we still can figure it out from the report. The dump of
shadow memory allows to identify the end of allocated memory, and
thereby the exact allocation size.
Link: http://lkml.kernel.org/r/1470062715-14077-4-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug: 64145065
(cherry-picked from 47b5c2a0f021e90a79845d1a1353780e5edd0bce)
Change-Id: I76b555f9a8469f685607ca50f6c51b2e0ad1b4ab
Signed-off-by: Paul Lawrence <paullawrence@google.com>
|
