summaryrefslogtreecommitdiff
path: root/net/openvswitch
AgeCommit message (Collapse)Author
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28openvswitch: fix a possible deadlock and lockdep warningFlavio Leitner
There are two problematic situations. A deadlock can happen when is_percpu is false because it can get interrupted while holding the spinlock. Then it executes ovs_flow_stats_update() in softirq context which tries to get the same lock. The second sitation is that when is_percpu is true, the code correctly disables BH but only for the local CPU, so the following can happen when locking the remote CPU without disabling BH: CPU#0 CPU#1 ovs_flow_stats_get() stats_read() +->spin_lock remote CPU#1 ovs_flow_stats_get() | <interrupted> stats_read() | ... +--> spin_lock remote CPU#0 | | <interrupted> | ovs_flow_stats_update() | ... | spin_lock local CPU#0 <--+ ovs_flow_stats_update() +---------------------------------- spin_lock local CPU#1 This patch disables BH for both cases fixing the deadlocks. Acked-by: Jesse Gross <jesse@nicira.com> ================================= [ INFO: inconsistent lock state ] 3.14.0-rc8-00007-g632b06a #1 Tainted: G I --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes: (&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch] [<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch] [<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch] [<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch] [<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0 [<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0 [<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0 [<ffffffff816c0798>] genl_rcv+0x28/0x40 [<ffffffff816bf830>] netlink_unicast+0x100/0x1e0 [<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770 [<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0 [<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0 [<ffffffff8166a911>] __sys_sendmsg+0x51/0x90 [<ffffffff8166a962>] SyS_sendmsg+0x12/0x20 [<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b irq event stamp: 1740726 hardirqs last enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840 hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840 softirqs last enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cpu_stats->lock)->rlock); <Interrupt> lock(&(&cpu_stats->lock)->rlock); *** DEADLOCK *** 5 locks held by swapper/0/0: #0: (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0 #4: (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.14.0-rc8-00007-g632b06a #1 Hardware name: /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0 Call Trace: <IRQ> [<ffffffff817cfe3c>] dump_stack+0x4d/0x66 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180 [<ffffffff810f8963>] mark_lock+0x223/0x2b0 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch] [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch] [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch] [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch] [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480 Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errorsZoltan Kiss
skb_zerocopy can copy elements of the frags array between skbs, but it doesn't orphan them. Also, it doesn't handle errors, so this patch takes care of that as well, and modify the callers accordingly. skb_tx_error() is also added to the callers so they will signal the failed delivery towards the creator of the skb. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20openvswitch: Correctly report flow used times for first 5 minutes after boot.Ben Pfaff
The kernel starts out its "jiffies" timer as 5 minutes below zero, as shown in include/linux/jiffies.h: /* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then takes any "later" time. This means that for the first five minutes after boot, flows will always be reported as never used, since 0 is greater than any time already seen. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15openvswitch: Fix race.Jarno Rajahalme
ovs_vport_cmd_dump() did rcu_read_lock() only after getting the datapath, which could have been deleted in between. Resolved by taking rcu_read_lock() before the get_dp() call. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-02-15openvswitch: Read tcp flags only then the tranport header is present.Jarno Rajahalme
Only the first IP fragment can have a TCP header, check for this. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-15ovs: fix dp check in ovs_dp_reset_user_featuresJiri Pirko
This fixes crash when userspace does "ovs-dpctl add-dp dev" where dev is existing non-dp netdevice. Introduced by: commit 44da5ae5fbea4686f667dc854e5ea16814e44c59 "openvswitch: Drop user features if old user space attempted to create datapath" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-15openvswitch: rename ->sync to ->syncpWANG Cong
Openvswitch defines u64_stats_sync as ->sync rather than ->syncp, so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 1c213bd24ad04f4430031 (net: introduce netdev_alloc_pcpu_stats() for drivers) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04openvswitch: Suppress error messages on megaflow updatesAndy Zhou
With subfacets, we'd expect megaflow updates message to carry the original micro flow. If not, EINVAL is returned and kernel logs an error message. Now that the user space subfacet layer is removed, it is expected that flow updates can arrive with a micro flow other than the original. Change the return code to EEXIST and remove the kernel error log message. Reported-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04openvswitch: Fix ovs_flow_free() ovs-lock assert.Pravin B Shelar
ovs_flow_free() is not called under ovs-lock during packet execute path (ovs_packet_cmd_execute()). Since packet execute does not touch flow->mask, there is no need to take that lock either. So move assert in case where flow->mask is checked. Found by code inspection. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04openvswitch: Fix ovs_dp_cmd_msg_size()Daniele Di Proietto
commit 43d4be9cb55f3bac5253e9289996fd9d735531db (openvswitch: Allow user space to announce ability to accept unaligned Netlink messages) introduced OVS_DP_ATTR_USER_FEATURES netlink attribute in datapath responses, but the attribute size was not taken into account in ovs_dp_cmd_msg_size(). Signed-off-by: Daniele Di Proietto <daniele.di.proietto@gmail.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04openvswitch: Fix kernel panic on ovs_flow_freeAndy Zhou
Both mega flow mask's reference counter and per flow table mask list should only be accessed when holding ovs_mutex() lock. However this is not true with ovs_flow_table_flush(). The patch fixes this bug. Reported-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-02-04openvswitch: Pad OVS_PACKET_ATTR_PACKET if linear copy was performedThomas Graf
While the zerocopy method is correctly omitted if user space does not support unaligned Netlink messages. The attribute is still not padded correctly as skb_zerocopy() will not ensure padding and the attribute size is no longer pre calculated though nla_reserve() which ensured padding previously. This patch applies appropriate padding if a linear data copy was performed in skb_zerocopy(). Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-14net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-09openvswitch: Use kmem_cache_free() instead of kfree()Wei Yongjun
memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: e298e5057006 ('openvswitch: Per cpu flow stats.') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06ovs: make functions localStephen Hemminger
Several functions and datastructures could be local Found with 'make namespacecheck' Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Compute checksum in skb_gso_segment() if neededThomas Graf
The copy & csum optimization is no longer present with zerocopy enabled. Compute the checksum in skb_gso_segment() directly by dropping the HW CSUM capability from the features passed in. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Use skb_zerocopy() for upcallThomas Graf
Use of skb_zerocopy() can avoid the expensive call to memcpy() when copying the packet data into the Netlink skb. Completes checksum through skb_checksum_help() if not already done in GSO segmentation. Zerocopy is only performed if user space supported unaligned Netlink messages. memory mapped netlink i/o is preferred over zerocopy if it is set up. Cost of upcall is significantly reduced from: + 7.48% vhost-8471 [k] memcpy + 5.57% ovs-vswitchd [k] memcpy + 2.81% vhost-8471 [k] csum_partial_copy_generic to: + 5.72% ovs-vswitchd [k] memcpy + 3.32% vhost-5153 [k] memcpy + 0.68% vhost-5153 [k] skb_zerocopy (megaflows disabled) Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Pass datapath into userspace queue functionsThomas Graf
Allows removing the net and dp_ifindex argument and simplify the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Drop user features if old user space attempted to create datapathThomas Graf
Drop user features if an outdated user space instance that does not understand the concept of user_features attempted to create a new datapath. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Allow user space to announce ability to accept unaligned ↵Thomas Graf
Netlink messages Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: remove duplicated include from flow_table.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06net: ovs: use kfree_rcu instead of rcu_free_{sw_flow_mask_cb,acts_callback}Daniel Borkmann
As we're only doing a kfree() anyway in the RCU callback, we can simply use kfree_rcu, which does the same job, and remove the function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Per cpu flow stats.Pravin B Shelar
With mega flow implementation ovs flow can be shared between multiple CPUs which makes stats updates highly contended operation. This patch uses per-CPU stats in cases where a flow is likely to be shared (if there is a wildcard in the 5-tuple and therefore likely to be spread by RSS). In other situations, it uses the current strategy, saving memory and allocation time. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Enable memory mapped Netlink i/oThomas Graf
Use memory mapped Netlink i/o for all unicast openvswitch communication if a ring has been set up. Benchmark * pktgen -> ovs internal port * 5M pkts, 5M flows * 4 threads, 8 cores Before: Result: OK: 67418743(c67108212+d310530) usec, 5000000 (9000byte,0frags) 74163pps 5339Mb/sec (5339736000bps) errors: 0 + 2.98% ovs-vswitchd [k] copy_user_generic_string + 2.49% ovs-vswitchd [k] memcpy + 1.84% kpktgend_2 [k] memcpy + 1.81% kpktgend_1 [k] memcpy + 1.81% kpktgend_3 [k] memcpy + 1.78% kpktgend_0 [k] memcpy After: Result: OK: 24229690(c24127165+d102524) usec, 5000000 (9000byte,0frags) 206358pps 14857Mb/sec (14857776000bps) errors: 0 + 2.80% ovs-vswitchd [k] memcpy + 1.31% kpktgend_2 [k] memcpy + 1.23% kpktgend_0 [k] memcpy + 1.09% kpktgend_1 [k] memcpy + 1.04% kpktgend_3 [k] memcpy + 0.96% ovs-vswitchd [k] copy_user_generic_string Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Silence RCU lockdep checks from flow lookup.Jesse Gross
Flow lookup can happen either in packet processing context or userspace context but it was annotated as requiring RCU read lock to be held. This also allows OVS mutex to be held without causing warnings. Reported-by: Justin Pettit <jpettit@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Thomas Graf <tgraf@redhat.com>
2014-01-06openvswitch: Change ovs_flow_tbl_lookup_xx() APIsAndy Zhou
API changes only for code readability. No functional chnages. This patch removes the underscored version. Added a new API ovs_flow_tbl_lookup_stats() that returns the n_mask_hits. Reported by: Ben Pfaff <blp@nicira.com> Reviewed-by: Thomas Graf <tgraf@redhat.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Shrink sw_flow_mask by 8 bytes (64-bit) or 4 bytes (32-bit).Ben Pfaff
We won't normally have a ton of flow masks but using a size_t to store values no bigger than sizeof(struct sw_flow_key) seems excessive. This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit systems. On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but sw_flow_mask only by 8 bytes due to padding. Compile tested only. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06openvswitch: Correct comment.Ben Pfaff
Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-04net: unify the pcpu_tstats and br_cpu_netstats as oneLi RongQing
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17net: Add utility functions to clear rxhashTom Herbert
In several places 'skb->rxhash = 0' is being done to clear the rxhash value in an skb. This does not clear l4_rxhash which could still be set so that the rxhash wouldn't be recalculated on subsequent call to skb_get_rxhash. This patch adds an explict function to clear all the rxhash related information in the skb properly. skb_clear_hash_if_not_l4 clears the rxhash only if it is not marked as l4_rxhash. Fixed up places where 'skb->rxhash = 0' was being called. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17net: ovs: use CRC32 accelerated flow hash if availableFrancesco Fusco
Currently OVS uses jhash2() for calculating flow hashes in its internal flow_hash() function. The performance of the flow_hash() function is critical, as the input data can be hundreds of bytes long. OVS is largely deployed in x86_64 based datacenters. Therefore, we argue that the performance critical fast path of OVS should exploit underlying CPU features in order to reduce the per packet processing costs. We replace jhash2 with the hash implementation provided by the kernel hash lib, which exploits the crc32l instruction to achieve high performance Our patch greatly reduces the hash footprint from ~200 cycles of jhash2() to around ~90 cycles in case of ovs_flow_hash_crc() (measured with rdtsc over maximum length flow keys on an i7 Intel CPU). Additionally, we wrote a microbenchmark to stress the flow table performance. The benchmark inserts random flows into the flow hash and then performs lookups. Our hash deployed on a CRC32 capable CPU reduces the lookup for 1000 flows, 100 masks from ~10,100us to ~6,700us, for example. Thus, simply use the newly introduced arch_fast_hash2() as a drop-in replacement. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Thomas Graf <tgraf@redhat.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-19genetlink: make multicast groups const, prevent abuseJohannes Berg
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: pass family to functions using groupsJohannes Berg
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: add and use genl_set_err()Johannes Berg
Add a static inline to generic netlink to wrap netlink_set_err() to make it easier to use here - use it in openvswitch (the only generic netlink user of netlink_set_err()). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: only pass array to genl_register_family_with_ops()Johannes Berg
As suggested by David Miller, make genl_register_family_with_ops() a macro and pass only the array, evaluating ARRAY_SIZE() in the macro, this is a little safer. The openvswitch has some indirection, assing ops/n_ops directly in that code. This might ultimately just assign the pointers in the family initializations, saving the struct genl_family_and_ops and code (once mcast groups are handled differently.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14genetlink: make all genl_ops users constJohannes Berg
Now that genl_ops are no longer modified in place when registering, they can be made const. This patch was done mostly with spatch: @@ identifier ops; @@ +const struct genl_ops ops[] = { ... }; (except the struct thing in net/openvswitch/datapath.c) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
2013-11-06net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-04Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== Open vSwitch A set of updates for net-next/3.13. Major changes are: * Restructure flow handling code to be more logically organized and easier to read. * Rehashing of the flow table is moved from a workqueue to flow installation time. Before, heavy load could block the workqueue for excessive periods of time. * Additional debugging information is provided to help diagnose megaflows. * It's now possible to match on TCP flags. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/netconsole.c net/bridge/br_private.h Three mostly trivial conflicts. The net/bridge/br_private.h conflict was a function signature (argument addition) change overlapping with the extern removals from Joe Perches. In drivers/net/netconsole.c we had one change adjusting a printk message whilst another changed "printk(KERN_INFO" into "pr_info(". Lastly, the emulex change was a new inline function addition overlapping with Joe Perches's extern removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-01openvswitch: Use flow hash during flow lookup operation.Pravin B Shelar
Flow->hash can be used to detect hash collisions and avoid flow key compare in flow lookup. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01openvswitch: TCP flags matching support.Jarno Rajahalme
tcp_flags=flags/mask Bitwise match on TCP flags. The flags and mask are 16-bit num‐ bers written in decimal or in hexadecimal prefixed by 0x. Each 1-bit in mask requires that the corresponding bit in port must match. Each 0-bit in mask causes the corresponding bit to be ignored. TCP protocol currently defines 9 flag bits, and additional 3 bits are reserved (must be transmitted as zero), see RFCs 793, 3168, and 3540. The flag bits are, numbering from the least significant bit: 0: FIN No more data from sender. 1: SYN Synchronize sequence numbers. 2: RST Reset the connection. 3: PSH Push function. 4: ACK Acknowledgement field significant. 5: URG Urgent pointer field significant. 6: ECE ECN Echo. 7: CWR Congestion Windows Reduced. 8: NS Nonce Sum. 9-11: Reserved. 12-15: Not matchable, must be zero. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-11-01openvswitch: Widen TCP flags handling.Jarno Rajahalme
Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t). The kernel interface remains at 8 bits, which makes no functional difference now, as none of the higher bits is currently of interest to the userspace. Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>