summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-10-15radiotap: fix vendor namespace parsingJohannes Berg
There's a bug with radiotap vendor namespace parsing if you don't register for the given namespace extensions. Fix this by passing only the unknown vendor namespaces and the registered data to frontends, but not both. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: fix SMPS requestJohannes Berg
It looks like I submitted a different patch than I tested, because clearly the code in mac80211 is missing actually propagating the requested SMPS mode. Fix that! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13mac80211: add probe request filter flagJohannes Berg
Using the frame registration notification, we can see when probe requests are requested and notify the low-level driver via filtering. The flag is also set in AP and IBSS modes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-13cfg80211: notify drivers about frame registrationsJohannes Berg
Drivers may need to adjust their filters according to frame registrations, so notify them about them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-12wireless: Print wiphy name in sysfs.Ben Greear
The index cannot be used to reliably reconstruct a phy name, so explicitly add the phy name to sysfs so that scripts can figure out the parent phy device for a particular wireless interface. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: minstrel_ht A-MPDU fixBjörn Smedman
This patch fixes two problems with the minstrel_ht rate control algorithms handling of A-MPDU frames: 1. The ampdu_len field of the tx status is not always initialized for non-HT frames (and it would probably be unreasonable to require all drivers to do so). This could cause rate control statistics to be corrupted. We now trust the ampdu_len and ampdu_ack_len fields only when the frame is marked with the IEEE80211_TX_STAT_AMPDU flag. 2. Successful transmission attempts where only recognized when the A-MPDU subframe carrying the rate control status information was marked with the IEEE80211_TX_STAT_ACK flag. If this information happed to be carried on a frame that failed to be ACKed then the other subframes (which may have succeeded) where not correctly registered. We now update rate control statistics regardless of whether the subframe carrying the information was ACKed or not. Cc: <stable@kernel.org> Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: don't kmalloc 16 bytesJohannes Berg
Since this small buffer isn't used for DMA, we can simply allocate it on the stack, it just needs to be 16 bytes of which only 8 will be used for WEP40 keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11cfg80211: add channel utilization stats to the survey commandFelix Fietkau
Using these, user space can calculate a relative channel utilization with arbitrary intervals by regularly taking snapshots of the survey results. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: temporarily disable reorder release timerChristian Lamparter
Several serve threading problems in the current release reorder timer implementation have been discovered. A lengthy discussion - which lists some of the pitfalls and possible solutions - can be found at: http://marc.info/?t=128635927000001 But due to the complicated nature of the subject and the imminent advent of a new -rc cycle, it was decided to disable the feature for the time being. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: fix possible null-pointer de-referenceChristian Lamparter
This patch not only fixes a null-pointer de-reference that would be triggered by a PLINK_OPEN frame with mis- matching/incompatible mesh configuration, but also responds correctly to non-compatible PLINK_OPEN frames by generating a PLINK_CLOSE with the right reason code. The original bug was detected by smatch. ( http://repo.or.cz/w/smatch.git ) net/mac80211/mesh_plink.c +574 mesh_rx_plink_frame(168) error: we previously assumed 'sta' could be null. Cc: <stable@kernel.org> Reviewed-and-Tested-by: Steve deRosier <steve@cozybit.com> Reviewed-and-Tested-by: Javier Cardona <javier@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11wireless: Set some stats used by /proc/net/wireless (wext)Ben Greear
Some stats for /proc/net/wireless (and wext in general) are not being set. This patch addresses a few of those with values easily obtained from mac80211 core. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: Improve mlme probe response log messages.Ben Greear
Old messages didn't mention the device in question. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11Revert "wireless: Use first phyX name available when registering phy devices."Johannes Berg
This reverts commit 5a254ffe3ffdfa84fe076009bd8e88da412180d2. The commit failed to take into account that allocated wireless devices (wiphys) are not added into the device list upon allocation, but only when they are registered. Therefore, it opened up a race between allocating and registering a name, so that if two processes allocate and register concurrently ("alloc, alloc, register, register" rather than "alloc, register, alloc, register") the code will attempt to use the same name twice. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-10-07cfg80211: constify WDS addressJohannes Berg
There's no need for the WDS peer address to not be const, so make it const. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07nl80211: use new genl helpers for WDSJohannes Berg
Bill Jordan's patch to allow setting the WDS peer crossed with my patch removing all the boilerplate code in nl80211, and consequently he didn't make use of it yet. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07mac80211: fix sw scan lockingJohannes Berg
The recent scan overhaul broke locking because now we can jump to code that attempts to unlock, while we don't have the mutex held. Fix this by holding the mutex around all the relevant code. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-07Revert "mac80211: use netif_receive_skb in ieee80211_tx_status callpath"John W. Linville
This reverts commit 5ed3bc7288487bd4f891f420a07319e0b538b4fe. It turns-out that not all drivers are calling ieee80211_tx_status from a compatible context. Revert this for now and try again later... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: avoid uninitialized var warning in ieee80211_scan_cancelJohn W. Linville
net/mac80211/scan.c: In function ‘ieee80211_scan_cancel’: net/mac80211/scan.c:794: warning: ‘finish’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211: fix BSS double-unlinkingJohannes Berg
When multiple interfaces are actively trying to associate with the same BSS, they may both find that the BSS isn't there and then try to unlink it. This can cause errors since the unlinking code can't currently deal with items that have already been unlinked. Normally this doesn't happen as most people don't try to use multiple station interfaces that associate at the same time too. Fix this by using the list entry as a flag to see if the item is still on a list. Cc: stable@kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Hun-Kyi Wynn <hkwynn@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06nl80211/mac80211: Add retry and failed transmission count to station infoBruno Randolf
This information is already available in mac80211, we just need to export it via cfg80211 and nl80211. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: compete scan to cfg80211 if deferred scan fail to startStanislaw Gruszka
We nulify local->scan_req on failure in __ieee80211_start_scan, so __ieee80211_scan_completed will not call cfg80211_scan_done. Fix that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: do not requeue scan work when not neededStanislaw Gruszka
When performing hw scan and not abort it, __ieee80211_scan_completed() is currently called from scan work, so does not need to reschedule work to call drv_hw_scan(). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: assure we also cancel deferred scan requestStanislaw Gruszka
This is partial revert and fix for commit 85f72bc839705294b32b6c16b491c0422f0a71b3 "mac80211: only cancel software-based scans on suspend" When cfg80211 request the scan and mac80211 perform some management work, we defer the scan request. We do not canceling such requests when calling ieee80211_scan_cancel(), because of SCAN_SW_SCANNING bit check just before the call. So fix that problem. Another problem, which commit 85f72bc839705294b32b6c16b491c0422f0a71b3 tries to solve, is we can not cancel HW scan. Hence patch make ieee80211_scan_cancel() ignore HW scan (see code comments). Keeping local->mtx lock assures that the deferred scan will not become "working" HW scan. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: keep lock when calling __ieee80211_scan_completed()Stanislaw Gruszka
We are taking local->mtx inside __ieee80211_scan_completed(), but just before call to that function we drop the lock. Dropping/taking lock is not good, because can lead to hard to understand race conditions. Patch split scan_completed() code into two functions, first must be called with local->mtx taken and second without it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: reduce number of __ieee80211_scan_completed callsStanislaw Gruszka
Use goto instruction to call __ieee80211_scan_completed only ones in ieee80211_scan_work. This is prepare for the next patch. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06nl80211: fix error in generic netif_running checkJohannes Berg
Yikes! The error return keeps a netdev reference and the rdev mutex locked, fix that! Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06mac80211: avoid transmitting delBA to old APJohannes Berg
When roaming while we have active BA session, we can end up transmitting delBA frames to the old AP while we're already on the new AP's channel, which can cause warnings. Simply avoid sending those frames, but still tear down the internal session state, since they are not really necessary anyway as we will implicitly disassociate when sending the association to the new AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-06mac80211: delete AddBA response timerJohannes Berg
We never delete the addBA response timer, which is typically fine, but if the station it belongs to is deleted very quickly after starting the BA session, before the peer had a chance to reply, the timer may fire after the station struct has been freed already. Therefore, we need to delete the timer in a suitable spot -- best when the session is being stopped (which will happen even then) in which case the delete will be a no-op most of the time. I've reproduced the scenario and tested the fix. This fixes the crash reported at http://mid.gmane.org/4CAB6F96.6090701@candelatech.com Cc: stable@kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: fix channel assumption for association done workLuis R. Rodriguez
Be consistent and use the wk->chan instead of the local->hw.conf.channel for the association done work. This prevents any possible races against channel changes while we run this work. In the case that the race did happen we would be initializing the bit rates for the new AP under the assumption of a wrong channel and in the worst case, wrong band. This could lead to trying to assuming we could use CCK frames on 5 GHz, for example. This patch has a fix for kernels >= v2.6.34 Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: fix deadlock with multiple interfacesJohannes Berg
The locking around ieee80211_recalc_smps is buggy -- it cannot acquire another interface's mutex while the iflist mutex is held because another code path could be holding the iface mutex and trying to acquire the iflist mutex. But the locking is also unnecessary, we only check "ifmgd->associated" as a bool, and don't use the pointer (in check_mgd_smps). Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05nl80211: reduce dumping boilerplateJohannes Berg
Consolidate boilerplate code needed for .dumpit calls operating on netdevs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05nl80211: use generic check for netif_runningJohannes Berg
Use a new flag that requires the netdev to be UP and use it to check instead of coding the check into all functions that require it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05nl80211: use the new genetlink pre/post_doit hooksJohannes Berg
This makes nl80211 use the new genetlink pre_doit/post_doit hooks for locking and checking the interface/wiphy index. This significantly reduces the code size and the likelihood of locking errors. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05genetlink: introduce pre_doit/post_doit hooksJohannes Berg
Each family may have some amount of boilerplate locking code that applies to most, or even all, commands. This allows a family to handle such things in a more generic way, by allowing it to a) include private flags in each operation b) specify a pre_doit hook that is called, before an operation's doit() callback and may return an error directly, c) specify a post_doit hook that can undo locking or similar things done by pre_doit, and finally d) include two private pointers in each info struct passed between all these operations including doit(). (It's two because I'll need two in nl80211 -- can be extended.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: Add WME information element for IBSSBruno Randolf
Enable WME QoS in IBSS mode by adding a WME information element to beacons and probe respones and by checking for it and marking stations as WME capable if it is present. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: distinct between max rates and the number of rates the hw can reportHelmut Schaa
Some drivers cannot handle multiple retry rates specified by the rc algorithm but instead use their own retry table (for example rt2800). However, if such a device registers itself with a max_rates value of 1 the rc algorithm cannot make use of the extended information the device can provide about retried rates. On the other hand, if a device registers itself with a max_rates value > 1 the rc algorithm assumes that the device can handle multi rate retries. Fix this issue by introducing another hw parameter max_report_rates that can be set to a different value then max_rates to indicate if a device is capable of reporting more rates then specified in max_rates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: fix for WDS interfacesBill Jordan
Initialize the rate table for WDS interfaces, and add cases to allow WDS packets to pass the xmit and receive tests. Signed-off-by: Bill Jordan <bjordan@rajant.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05cfg80211: patches to allow setting the WDS peerBill Jordan
Added a nl interface to set the peer bssid of a WDS interface. Signed-off-by: Bill Jordan <bjordan@rajant.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: Add validity check for beacon_crc valueJuuso Oikarinen
On association to an AP, after receiving beacons, the beacon_crc value is set. The beacon_crc value is not reset in disassociation, but the BSS data may be expired at a later point. When associating again, it's possible that a beacon for the AP is not received, resulting in the beacon_ies to remain NULL. After association, further beacons will not update the beacon data, as the crc value of the beacon has not changed, and the beacon_crc still holds a value matching the beacon. The beacon_ies will remain forever null. One of the results of this is that WLAN power save cannot be entered, the STA will remain foreven in active mode. Fix this by adding a validation flag for the beacon_crc, which is cleared on association. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: perform scan cancel in hw reset workStanislaw Gruszka
Move ieee80211_scan_cancel() and all other related code to ieee80211_restart_work() as ieee80211_restart_hw() is intended to be callable from any context. Fix a bug that RTNL lock is not taken during ieee80211_cancel_scan(). Take local->mtx before WARN(test_bit(SCAN_HW_SCANNING, &local->scanning) to prevent the race condition with __ieee80211_start_scan() described here: http://marc.info/?l=linux-wireless&m=128516716810537&w=2 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05cfg80211: fix lockingJohannes Berg
Add missing unlocking of the wiphy in set_channel, and don't try to unlock a non-existing wiphy in set_cqm. Cc: stable@kernel.org [2.6.35+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05cfg80211/mac80211: allow management frame TX in AP modeJohannes Berg
Enable management frame transmission and subscribing to management frames through nl80211 in both cfg80211 and mac80211. Also update a few places that I forgot to update for P2P-client mode previously, and fix a small bug with non-action frames in this API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05nl80211: allow drivers to indicate whether the survey data channel is in useFelix Fietkau
Some user space applications only want to display survey data for the operating channel, however there is no API to get that yet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05mac80211: fix rx monitor filter refcountersChristian Lamparter
This patch fixes an refcounting bug. Previously it was possible to corrupt the per-device recv. filter and monitor management counters when: iw dev wlanX set monitor [new flags] was issued on an active monitor interface. Acked-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05wireless: Use first phyX name available when registering phy devices.Ben Greear
Choose first available phyX name when creating phy devices. This means that reloading a wifi driver will not cause a change in the name of it's phy device. Also, allow users to rename a phy to any un-used name, including phy%d. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28mac80211: Fix WMM driver queue configurationJuuso Oikarinen
The WMM parameter configuration function (ieee80211_sta_wmm_params) only configures the WMM parameters to the driver is the wmm_last_param_set counter value is changed by the AP. The wmm_last_param_set is initialized to -1 on association in order to ensure the configuration is made to the driver at least once on association, but currently this initialization is done *after* the WMM parameter configuration function was called. This leads to unreliability in the driver getting properly configured on first association (depending on what counter value the AP happens to use.) When disassociating (the wmm default parameters are configured to the driver) and then reassociating, due to the above the WMM configuration is not set to the driver at all. On drivers without beacon filtering the problem is corrected by later beacons, but on drivers with beacon filtering the WMM will remain permanently incorrectly configured. Fix this by moving the initialization of wmm_last_param_set to -1 before ieee80211_sta_wmm_params is called on association. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-28cfg80211: always set IBSS basic ratesJohannes Berg
IBSS started from wireless extensions is currently missing basic rate configuration, fix this by moving the code to generate the default to the common code that gets invoked for both nl80211 and wext. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-24 23:25:02 +0000