summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-05-09tipc: don't directly overwrite node action_flagsYing Xue
Each node action flag should be set or cleared separately, instead we now set the whole flags variable in one shot, and it's turned out to be hard to see which other flags are affected. Therefore, for instance, we explicitly clear TIPC_WAIT_OWN_LINKS_DOWN bit in node_lost_contact(). Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-09tipc: rename enum names of node flagsYing Xue
Rename node flags to action_flags as well as its enum names so that they can reflect its real meanings. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08l2tp: Remove UDP checksum verificationTom Herbert
Validating the UDP checksum is now done in UDP before handing packets to the encapsulation layer. Note that this also eliminates the "feature" where L2TP can ignore a non-zero UDP checksum (doing this was contrary to RFC 1122). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08net: Verify UDP checksum before handoff to encapTom Herbert
Moving validation of UDP checksum to be done in UDP not encap layer. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08icmp6: Call skb_checksum_validateTom Herbert
Use skb_checksum_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08icmp: Call skb_checksum_simple_validateTom Herbert
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08igmp: Call skb_checksum_simple_validateTom Herbert
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08gre6: Call skb_checksum_simple_validateTom Herbert
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08gre: Call skb_checksum_simple_validateTom Herbert
Use skb_checksum_simple_validate to verify checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-08ipv4: remove inet_addr_hash_lock in devinet.cWANG Cong
All the callers hold RTNL lock, so there is no need to use inet_addr_hash_lock to protect the hash list. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07net: clean up snmp stats codeWANG Cong
commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05ipv6: Need to sock_put on csum errorTom Herbert
Commit 4068579e1e098fa81d48db9ba4432ab664c58561 ("net: Implmement RFC 6936 (zero RX csums for UDP/IPv6)") introduced zero checksums being allowed for IPv6, but in the case that a socket disallows a zero checksum on RX we need to sock_put. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: purge signal handler infrastructureYing Xue
In the previous commits of this series, we removed all asynchronous actions which were based on the tasklet handler - "tipc_k_signal()". So the moment has now come when we can completely remove the tasklet handler infrastructure. That is done with this commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: avoid to asynchronously reset all linksYing Xue
Postpone the actions of resetting all links until after bclink lock is released, avoiding to asynchronously reset all links. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: convert allocations of global variables associated with bclinkYing Xue
Convert allocations of global variables associated with bclink from static way to dynamical way for the convenience of bclink instance initialisation. Meanwhile, this also helps TIPC support name space in the future easily. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: define new functions to operate bc_lockYing Xue
As we are going to do more jobs when bc_lock is released, the two operations of holding/releasing the lock should be encapsulated with functions. In addition, we move bc_lock spin lock into tipc_bclink structure avoiding to define the global variable. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: avoid to asynchronously deliver name tables to peer nodeYing Xue
Postpone the actions of delivering name tables until after node lock is released, avoiding to do it under asynchronous context. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: remove TIPC_NAMES_GONE node flagYing Xue
Since previously what all publications pertaining to the lost node were removed from name table was finished in tasklet context asynchronously, we need to TIPC_NAMES_GONE flag indicating whether the node cleanup work is finished or not. But now as the cleanup work has been finished when node lock is released, the flag becomes meaningless for us. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: avoid to asynchronously notify subscriptionsYing Xue
Postpone the actions of notifying subscriptions until after node lock is released, avoiding to asynchronously execute registered handlers when node is lost. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: rename setup_blocked variable of node struct to flagsYing Xue
Rename setup_blocked variable of node struct to a more common name called "flags", which will be used to represent kinds of node states. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: adjust order of variables in tipc_node structureYing Xue
Move more frequently used variables up to the head of tipc_node structure, hopefully improving a bit performance. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05tipc: always use tipc_node_lock() to hold node lockYing Xue
Although we obtain node lock with tipc_node_lock() in most time, there are still places where we directly use native spin lock interface to grab node lock. But as we will do more jobs in the future when node lock is released, we should ensure that tipc_node_lock() is always called when node lock is taken. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05ipv6: remove unused function ipv6_inherit_linklocal()WANG Cong
It is no longer used after commit e837735ec406a347756e (ip6_tunnel: ensure to always have a link local address). Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Implmement RFC 6936 (zero RX csums for UDP/IPv6)Tom Herbert
RFC 6936 relaxes the requirement of RFC 2460 that UDP/IPv6 packets which are received with a zero UDP checksum value must be dropped. RFC 6936 allows zero checksums to support tunnels over UDP. When sk_no_check is set we allow on a socket we allow a zero IPv6 UDP checksum. This is for both sending zero checksum and accepting a zero checksum on receive. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Call skb_checksum_init in IPv6Tom Herbert
Call skb_checksum_init instead of private functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05net: Call skb_checksum_init in IPv4Tom Herbert
Call skb_checksum_init instead of private functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-05-02 Please pull this batch of updates intended for the 3.16 stream... For the mac80211 bits, Johannes says: "In this round we have a large number of small features and improvements from people too numerous to list here. The only really bit thing is Michał and Luca's CSA work (including changing how interface combination verification is done)." For the Bluetooth bits, Gustavo says: "Here goes some patches for the -next release. There is nothing really special for this pull request, just a bunch of refactors, fixes and clean ups." For the ath10k/ath6kl bits, Kalle says: "For ath6kl Kalle fixed a bunch of checkpatch warnings. In ath10k we had more changes, major ones being: * fix memory allocation failures after a firmware crash (Michal) * some rework of DFS configuration to enable it correctly in all cases (Michal) * add a new firmware crash option to make it possible to crash 10.1 firmware for testing purposes (Marek P) * fix RTS/CTS protection in certain cases (Marek K) * fix wrong RSSI and rate reporting in some cases (Janusz) * fix firmware stats reporting (Chun, Ben & Bartosz)" For the iwlwifi bits, Emmanuel says: "I have here a bunch of unrelated things. I disabled support for -7.ucode which means that I can removed a lot of code. Eliad has a brand new feature: we reduce the Tx power when the link allows - this reduces our power consumption. The regular changes in power and scan area. One interesting thing though is the patches from Johannes, we have now GRO which allows to increase our throughput in TCP Rx. The main advantage is that it reduces the number of TCP Acks - these TCP Acks are completely useless when we are using A-MPDU since the first packet of the A-MPDU generates a TCP Ack which is made obsolete by the next packets." Along with that, there are a variety of updates to b43, mwifiex, rtl8180 and wil6210 drivers and a handful of other updates here and there. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05unregister_netdevice : move RTM_DELLINK to until after ndo_uninitRoopa Prabhu
This patch fixes ordering of rtnl notifications during unregister_netdevice by moving RTM_DELLINK notification to until after ndo_uninit. The problem was seen with unregistering bond netdevices. bond ndo_uninit callback generates a few RTM_NEWLINK notifications for NETDEV_CHANGEADDR and NETDEV_FEAT_CHANGE. This is seen mostly when the bond is deleted with slaves still enslaved to the bond. During unregister netdevice (rollback_registered_many to be specific) bond ndo_uninit is called after RTM_DELLINK notification goes out. This results in userspace seeing RTM_DELLINK followed by a couple of RTM_NEWLINK's. In userspace problem was seen with libnl. libnl cache deletes the bond when it sees RTM_DELLINK and re-adds the bond with the following RTM_NEWLINK. Resulting in a stale bond entry in libnl cache when the kernel has already deleted the bond. This patch has been tested for bond, bridges and vlan devices. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04net: filter: misc/various cleanupsDaniel Borkmann
This contains only some minor misc cleanpus. We can spare us the extra variable declaration in __skb_get_pay_offset(), the cast in __get_random_u32() is rather unnecessary and in __sk_migrate_realloc() we can remove the memcpy() and do a direct assignment of the structs. Latter was suggested by Fengguang Wu found with coccinelle. Also, remaining pointer casts of long should be unsigned long instead. Suggested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04net: filter: make register naming more comprehensibleDaniel Borkmann
The current code is a bit hard to parse on which registers can be used, how they are mapped and all play together. It makes much more sense to define this a bit more clearly so that the code is a bit more intuitive. This patch cleans this up, and makes naming a bit more consistent among the code. This also allows for moving some of the defines into the header file. Clearing of A and X registers in __sk_run_filter() do not get a particular register name assigned as they have not an 'official' function, but rather just result from the concrete initial mapping of old BPF programs. Since for BPF helper functions for BPF_CALL we already use small letters, so be consistent here as well. No functional changes. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04net: filter: simplify label names from jump-tableDaniel Borkmann
This patch simplifies label naming for the BPF jump-table. When we define labels via DL(), we just concatenate/textify the combination of instruction opcode which consists of the class, subclass, word size, target register and so on. Each time we leave BPF_ prefix intact, so that e.g. the preprocessor generates a label BPF_ALU_BPF_ADD_BPF_X for DL(BPF_ALU, BPF_ADD, BPF_X) whereas a label name of ALU_ADD_X is much more easy to grasp. Pure cleanup only. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03tcp: remove in_flight parameter from cong_avoid() methodsEric Dumazet
Commit e114a710aa505 ("tcp: fix cwnd limited checking to improve congestion control") obsoleted in_flight parameter from tcp_is_cwnd_limited() and its callers. This patch does the removal as promised. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02tcp: fix cwnd limited checking to improve congestion controlEric Dumazet
Yuchung discovered tcp_is_cwnd_limited() was returning false in slow start phase even if the application filled the socket write queue. All congestion modules take into account tcp_is_cwnd_limited() before increasing cwnd, so this behavior limits slow start from probing the bandwidth at full speed. The problem is that even if write queue is full (aka we are _not_ application limited), cwnd can be under utilized if TSO should auto defer or TCP Small queues decided to hold packets. So the in_flight can be kept to smaller value, and we can get to the point tcp_is_cwnd_limited() returns false. With TCP Small Queues and FQ/pacing, this issue is more visible. We fix this by having tcp_cwnd_validate(), which is supposed to track such things, take into account unsent_segs, the number of segs that we are not sending at the moment due to TSO or TSQ, but intend to send real soon. Then when we are cwnd-limited, remember this fact while we are processing the window of ACKs that comes back. For example, suppose we have a brand new connection with cwnd=10; we are in slow start, and we send a flight of 9 packets. By the time we have received ACKs for all 9 packets we want our cwnd to be 18. We implement this by setting tp->lsnd_pending to 9, and considering ourselves to be cwnd-limited while cwnd is less than twice tp->lsnd_pending (2*9 -> 18). This makes tcp_is_cwnd_limited() more understandable, by removing the GSO/TSO kludge, that tried to work around the issue. Note the in_flight parameter can be removed in a followup cleanup patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02net: Allow tc changes in user namespacesStéphane Graber
This switches a few remaining capable(CAP_NET_ADMIN) to ns_capable so that root in a user namespace may set tc rules inside that namespace. Signed-off-by: Stéphane Graber <stgraber@ubuntu.com> Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2014-04-30tipc: fix memory leak of publicationsYing Xue
Commit 1bb8dce57f4d15233688c68990852a10eb1cd79f ("tipc: fix memory leak during module removal") introduced a memory leak issue: when name table is stopped, it's forgotten that publication instances are freed properly. Additionally the useless "continue" statement in tipc_nametbl_stop() is removed as well. Reported-by: Jason <huzhijiang@gmail.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30net: ipv6: Introduce ip6_sk_dst_hoplimit.Lorenzo Colitti
This replaces 6 identical code snippets with a call to a new static inline function. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/mac80211/chan.c
2014-04-30Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-04-28tipc: move the delivery of named messages out of nametbl lockYing Xue
Commit a89778d8baf19cd7e728d81121a294a06cedaad1 ("tipc: add support for link state subscriptions") introduced below possible deadlock scenario: CPU0 CPU1 T0: tipc_publish() link_timeout() T1: tipc_nametbl_publish() [grab node lock]* T2: [grab nametbl write lock]* link_state_event() T3: named_cluster_distribute() link_activate() T4: [grab node lock]* tipc_node_link_up() T5: tipc_nametbl_publish() T6: [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the delivery of named messages via link out of name nametbl lock, the reverse order of holding locks will be eliminated, as a result, the deadlock will be killed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28tipc: fix out of bounds indexingErik Hugne
Commit 78acb1f9b898e85fa2c1e28e700b54b66b288e8d ("tipc: add ioctl to fetch link names") introduced a buffer overflow bug where specially crafted ioctl requests could cause out-of-bounds indexing of the node->links array. This was caused by an incorrect check vs MAX_BEARERS, and the static code checker complaint is: net/tipc/node.c:459 tipc_node_get_linkname() error: buffer overflow 'node->links' 2 <= 2 Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28ipv4: Use predefined value for readabilityHisao Tanabe
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28ethtool: exit the loop when invalid index occursJean Sacren
The commit 3de0b592394d ("ethtool: Support for configurable RSS hash key") introduced a new function ethtool_copy_validate_indir() with full iteration of the loop to validate the ring indices, which could be an overkill. To minimize the impact, we ought to exit the loop as soon as the invalid index occurs for the very first time. The remaining loop simply doesn't serve any more purpose. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Venkata Duvvuru <VenkatKumar.Duvvuru@Emulex.Com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-28mac80211: Support dynamic AP mode channel width changesJouni Malinen
Implement the new cfg80211 capability to enable mac80211-based drivers to support for dynamic channel bandwidth changes (e.g., HT 20/40 MHz changes). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28cfg80211: Dynamic channel bandwidth changes in AP modeJouni Malinen
This extends NL80211_CMD_SET_CHANNEL to allow dynamic channel bandwidth changes in AP mode (including P2P GO) during a lifetime of the BSS. This can be used to implement, e.g., HT 20/40 MHz co-existence rules on the 2.4 GHz band. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28mac80211: remove unnecessary assignmentZhao, Gang
P2P_DEVICE doesn't support ieee80211_bss_info_change_notify() for now, so it's not needed to set changed flags for P2P_DEVICE. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-28mac80211: avoid calling useless channel context codeZhao, Gang
ieee80211_assign_chanctx() checks if local->use_chanctx is true, so the two code block related to ieee80211_assign_chanctx() can be moved into above if clause, emphasize that these code are executed only if local->use_chanctx is true. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [change subject] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-27sched, act: allow to clear all actions as wellCong Wang
When we change the list of action on a given filter, currently we don't change it to empty. This is a bug, we should allow to change to whatever users given. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27sched, cls: check if we could overwrite actions when changing a filterCong Wang
When actions are attached to a filter, they are a part of the filter itself, so when changing a filter we should allow to overwrite the actions inside as well. In my specific case, when I tried to _append_ a new action to an existing filter which already has an action, I got EEXIST since kernel refused to overwrite the existing one in kernel. This patch checks if we are changing the filter checking NLM_F_CREATE flag (Sigh, filters don't use NLM_F_REPLACE...) and then passes the boolean down to actions. This fixes the problem above. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-27tipc: fix a possible memory leakYing Xue
The commit a8b9b96e959f3c035af20b1bd2ba67b0b7269b19 ("tipc: fix race in disc create/delete") leads to the following static checker warning: net/tipc/discover.c:352 tipc_disc_create() warn: possible memory leak of 'req' The risk of memory leak really exists in practice. Especially when it's failed to allocate memory for "req->buf", tipc_disc_create() doesn't free its allocated memory, instead just directly returns with ENOMEM error code. In this situation, memory leak, of course, happens. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 22:32:06 +0000