summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-09-29Bluetooth: hci_le_adv_report_evt code refactoringAndre Guedes
There is no reason to treat the first advertising entry differently from the potential other ones. Besides, the current implementation can easily leads to typos. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-29Bluetooth: Fix possible NULL pointer dereferenceWaldemar Rymarkiewicz
Checking conn->pending_sec_level if there is no connection leads to potential null pointer dereference. Don't process pin_code_request_event at all if no connection exists. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Mark not declared l2cap_core functions as staticSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: use recommended LE connection parametersAnderson Lizardo
The new connection parameters now match the recommended values for Proximity and Health Thermometer profiles. The previous values were ramdomly chosen, and are either too low or too high for most cases. New values: Scan Interval: 60 ms Scan Window: 30 ms Minimum Connection Interval: 50 ms Maximum Connection Interval: 70 ms Supervision Timeout: 420 ms See "Table 5.2: Recommended Scan Interval and Scan Window Values" and "Table 5.3: Recommended Connection Interval Values" for both profiles for details. Note that the "fast connection" parameters were chosen, because we do not support yet dynamically changing these parameters from initiator side. Additionally, the Proximity profile recommends (section "4.4 Alert on Link Loss"): "It is recommended that the Link Supervision Timeout (LSTO) is set to 6x the connection interval." Minimum_CE_Length and Maximum_CE_Length were also changed from 0x0001 to 0x0000 because they are informational and optional, and old value was not reflecting reality. Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Perform L2CAP SDU reassembly without copying dataMat Martineau
Use sk_buff fragment capabilities to link together incoming skbs instead of allocating a new skb for reassembly and copying. The new reassembly code works equally well for ERTM and streaming mode, so there is now one reassembly function instead of two. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Handle fragmented skbs in bt_sock_stream_recvmsg()Mat Martineau
ERTM reassembly will be more efficient when skbs are linked together rather than copying every incoming data byte. The existing stream recv function assumes skbs are linear, so it needs to know how to handle fragments before reassembly is changed. bt_sock_recvmsg() already handles fragmented skbs. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Linearize skbs for use in BNEP, CMTP, HIDP, and RFCOMMMat Martineau
Fragmented skbs are only encountered when receiving ERTM or streaming mode L2CAP data. BNEP, CMTP, HIDP, and RFCOMM generally use basic mode, but they need to handle fragments without crashing. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: mark l2cap_create_iframe_pdu as staticLuiz Augusto von Dentz
l2cap_create_iframe_pdu is only used in l2cap_core.c Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Check 'dev_class' in mgmt_device_found()Andre Guedes
The mgmt_device_found event will be used to report LE devices found during discovery procedure. Since LE advertising reports events doesn't have class of device information, we need to check if 'dev_class' is not NULL before copying it. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Reduce critical region.Andre Guedes
This patch reduces the critial region (protected by hdev->lock) in hci_cc_le_set_scan_enable(). This way, only really required code is synchronized. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix wrong memcpy size on LE start encryptionAnderson Briglia
This patch fixes wrong memcpy size when copying rand value to HCI_OP_LE_START_ENC command. The compiler pretends that the array parameter was declared as a pointer and sizeof reports the size of the pointer. [1] [1] http://www.c-faq.com/aryptr/aryparmsize.html Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Remove support for other SMP keys than the LTKVinicius Costa Gomes
For now, only the LTK is properly supported. We are able to receive and generate the other types of keys, but we are not able to use them. So it's better not request them to be distributed. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix not setting a pending security levelVinicius Costa Gomes
For slave initiated security, we should set a default security level, for now BT_SECURITY_MEDIUM. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Revert "Bluetooth: Add support for communicating keys with userspace"Vinicius Costa Gomes
This reverts commit 5a0a8b49746771fba79866fb9185ffa051a6a183. If we use separate messages and list for SMP specific keys we can simplify the code. Conflicts: net/bluetooth/mgmt.c Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Use the LTK after receiving a LE Security RequestVinicius Costa Gomes
When receiving a security request from the remote device we should find if there is already a LTK associated with the remote device, if found we should use it to encrypt the link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix sending wrong authentication requirementsVinicius Costa Gomes
Until we support any pairing method (Passkey Entry, OOB) that gives MITM protection we shouldn't send that we have MITM protection. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add mgmt events for blacklistingAntti Julku
Add management interface events for blocking/unblocking a device. Sender of the block device command gets cmd complete and other mgmt sockets get the event. Event is also sent to mgmt sockets when blocking is done with ioctl, e.g when blocking a device with hciconfig. This makes it possible for bluetoothd to track status of blocked devices when a third party block or unblocks a device. Event sending is handled in mgmt_device_blocked function which gets called from hci_blacklist_add in hci_core.c. A pending command is added in mgmt_block_device, so that it can found when sending the event - the event is not sent to the socket from which the pending command came. Locks were moved out from hci_core.c to hci_sock.c and mgmt.c, because locking is needed also for mgmt_pending_add in mgmt.c. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Use the MEDIUM security level for pairingsVinicius Costa Gomes
This lifts the requirement of 16 digits pin codes when pairing with devices that do not support SSP when using the mgmt interface. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Require authentication if MITM protection is requestedVinicius Costa Gomes
The HIGH security level requires a 16 digit pin code for non-SSP bondings. Sometimes this requirement is not acceptable and we still want protection againts MITM attacks (which is something that the MEDIUM security level doesn't provide), for that we should allow another way to request authentication without using the HIGH security level. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Move SMP crypto functions to a workqueueVinicius Costa Gomes
The function crypto_blkcipher_setkey() called by smp_e() can sleep, so all the crypto work has to be moved to hci_dev workqueue. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Move SMP fields to a separate structureVinicius Costa Gomes
The objective is to make the core to have as little as possible information about SMP procedures and logic. Now, all the SMP specific information is hidden from the core. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: hidp: Add support for NO_INIT_REPORTS quirkDavid Herrmann
During setup the host initializes all HID reports. Some devices do not support this. If this quirk is set, we skip the initialization. See also usbhid_init_reports() for this quirk. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add LE link type for debugfs outputPeter Hurley
Add LE link type as known connection type for debugfs stringizing output. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add mgmt command for fast connectable modeAntti Julku
Add command to management interface for enabling/disabling the fast connectable mode. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add link_type information to the mgmt Connected eventVinicius Costa Gomes
One piece of information that was lost when using the mgmt interface, was the type of the connection. Using HCI events we used to know the type of the connection based on the type of the event, e.g. HCI_LE_Connection_Complete for LE links. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add support for running SMP without a socketVinicius Costa Gomes
When doing the pairing procedure we won't have an associated socket, but we still have to do the SMP negotiation. This adds support for encrypting the link and exchanging keys. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add support for pairing via mgmt over LEVinicius Costa Gomes
Using the advertising cache we are able to infer the type of the remote device, and so trigger pairing over the correct link type. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add a flag to indicate that SMP is going onVinicius Costa Gomes
Add HCI_CONN_LE_SMP_PEND flag to indicate that SMP is pending for that connection. This allows to have information that an SMP procedure is going on for that connection. We use the HCI_CONN_ENCRYPT_PEND to indicate that encryption (HCI_LE_Start_Encryption) is pending for that connection. While a SMP procedure is going on we hold an reference to the connection, to avoid disconnections. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Reset the security timer when a command is queuedVinicius Costa Gomes
Each time a SMP command is enqueued, we reset the SMP timer, this way we follow exactly what the spec mandates: "The Security Manager Timer shall be reset when an L2CAP SMP command is queued for transmission." Vol. 3, Part H, Section 3.4 Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: make use of connection number to optimize the schedulerLuiz Augusto von Dentz
This checks if there is any existing connection according to its type before start iterating in the list and immediately stop iterating when reaching the number of connections. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-20NFC: basic NCI protocol implementationIlan Elias
The NFC Controller Interface (NCI) is a standard communication protocol between an NFC Controller (NFCC) and a Device Host (DH), defined by the NFC Forum. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: move nfc.h from include/net to include/net/nfcIlan Elias
The file nfc.h was moved from include/net to include/net/nfc, since new NFC header files will be added to include/net/nfc. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: Add dev_up and dev_down control operationsIlan Elias
Add 2 new nfc control operations: dev_up to turn on the nfc device dev_down to turn off the nfc device Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20mac80211: fix indentationAlexander Simon
Signed-off-by: Alexander Simon <an.alexsimon@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20wireless: Do not allow disabled channel in scan requestRajkumar Manoharan
cfg80211_conn_scan allows disabled channels at scan request. Hence probe request was seen at the disabled one. This patch ensures that disabled channel never be added into the scan request's channel list. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20Merge branch 'master' of git://git.infradead.org/users/linville/wirelessJohn W. Linville
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-19cfg80211/nl80211: Add PMKSA caching candidate eventJouni Malinen
When the driver (or most likely firmware) decides which AP to use for roaming based on internal scan result processing, user space needs to be notified of PMKSA caching candidates to allow RSN pre-authentication to be used. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19rfkill: properly assign a boolean typeMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19cfg80211: validate IBSS BSSIDJohannes Berg
The IBSS BSSID is never validated, so an invalid one might end up being used. Fix this by rejecting invalid configuration. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19mac80211: Fix regression on queue stop during 2040 bss changeRajkumar Manoharan
The commit "mac80211: stop tx before doing hw config and rate update" stops the tx queue and call drv_flush so frequently whenever a beacon got received with 11n htcap. This leads to massive "Failed to stop TX DMA" logspam on embedded hw. So the queue stop and flush should be called if and only if there is a change in the channel type. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19cfg80211: add cfg80211_find_vendor_ie() functionEliad Peller
Add function to find vendor-specific ie (along with vendor-specific ie struct definition and P2P OUI values) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19Merge branch 'for-3.1' of git://github.com/padovan/bluetooth-nextJohn W. Linville
2011-09-16mac80211: fix endian issues and comments for BAR failure handlingFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16wireless: Fix rate mask for scan requestRajkumar Manoharan
The scan request received from cfg80211_connect do not have proper rate mast. So the probe request sent on each channel do not have proper the supported rates ie. Cc: stable@kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-16wireless: Reset beacon_found while updating regulatoryRajkumar Manoharan
During the association, the regulatory is updated by country IE that reaps the previously found beacons. The impact is that after a STA disconnects *or* when for any reason a regulatory domain change happens the beacon hint flag is not cleared therefore preventing future beacon hints to be learned. This is important as a regulatory domain change or a restore of regulatory settings would set back the passive scan and no-ibss flags on the channel. This is the right place to do this given that it covers any regulatory domain change. Cc: stable@kernel.org Reviewed-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-15Bluetooth: Fix timeout on scanning for the second timeOliver Neukum
The checks for HCI_INQUIRY and HCI_MGMT were in the wrong order, so that second scans always failed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-14mac80211: Update device channel in case of HW channel switch supportedShahar Levi
The hw.conf.channel value is not updated properly for drivers that support HW channel switch. Since the switch is done entirely by the driver and we don't call ieee80211_hw_config(), this value remains untouched. This patch fixes that by setting the new channel directly in ieee80211_chswitch_work(). Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: Mark all mesh stations as QoS capableJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: Mesh data frames must have the QoS headerJavier Cardona
Per sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the presence of the mesh control header in their QoS header. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14mac80211: Start implementing QoS support for mesh interfacesJavier Cardona
In order to support QoS in mesh, we need to assign queue mapping only after the next hop has been resolved, both for forwarded and locally originated frames. Also, now that this is fixed, remove the XXX comment in ieee80211_select_queue(). Also, V-Shy Ho reported that the queue mapping was not being applied to the forwarded frame (fwd_skb instead of skb). Fixed that as well. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 21:05:04 +0000