summaryrefslogtreecommitdiff
path: root/sound/pci/ice1712/ice1712.h
AgeCommit message (Collapse)Author
2014-07-04ALSA: ice1712: Correcting/completing #defines for REGSKonstantinos Tsimpoukas
This small patch completes #defines for Control/Status Register, adds comments for the missing ones there and on the Interrupt Mask Register and additionally corrects "#define ICE1712_SERR_LEVEL 0x04 -> 0x08", according to documentation. Signed-off-by: Konstantinos Tsimpoukas <kostaslinuxxx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-18ALSA: ice17xx: Fix inclusion of linux/io.hTakashi Iwai
Include linux/io.h in ice1712.h since inb() and outb() are used in inline functions there. Remove the redundant inclusion of that file in other places at the same time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-17ALSA: ice17xx: Constify strings and string arraysTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-17ALSA: ice1712: add chip_exit callbackOndrej Zary
Add chip_exit callback to allow card subdrivers to do cleanup work on module removal. Needed by Philips PSC724 subdriver to cancel delayed work. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai
Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-04Merge branch 'topic/hda' into for-linusTakashi Iwai
2009-11-16ALSA: ice1724 - make some bitfields unsignedDan Carpenter
This is a clean up and doesn't change the behavior. Bit fields should always be unsigned. Otherwise pm_suspend_enabled will be -1 when you want it to be 1. The other bad thing is that the sparse checker will complain 36 times if they aren't unsigned. The other bitfields in that struct are unsigned already. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - Support for multiple external clock typesPavel Hofman
* Support for customization of the external clock names * Adding hooks to playback_pro_open and capture_pro_open, allowing e.g. limiting available stream rates to a single value when the external clock rate is detected Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-21ALSA: ice1724 - adding GPIO routines for mask and directionPavel Hofman
* get/set routines for GPIO mask and direction Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-25ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2Igor Chernyshev
I've built a small HTPC and had to add suspend/resume support in ice1724 driver. There seem to be 3 existing bugs related to that: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4413 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3748 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2314 Due to hardware (un)availability, I only enabled the fix for Audiotrak Prodigy HD2 card, which is installed in my HTPC. However, most of my code should be reusable in the future on other ice1724-based cards as well (as long as people add card-specific peices of code). The fix is currently based on ALSA 1.0.20 and works on my MythBuntu 9.04 HTPC (using 2.6.28-11 kernel). Signed-off-by: Igor Chernyshev <igor.ch75+alsa at gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-06ALSA: ice1724 - Allow spec driver to create own routing controlsTakashi Iwai
Added a new flag, own_routing, to allow spec drivers to create own routing controls. Also, the basic get/put calls are changed to be external for later use by maya44 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-09-09ALSA: ice1712.c: fix coding styleAlexander Beregalov
before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-20[ALSA] ice1724: fix MIDIClemens Ladisch
The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Pavel Hofman <pavel.hofman@insite.cz>
2008-04-24[ALSA] Don't set gpio mask register in snd_ice1712_gpio_write_bits()Karsten Wiese
Some calls to snd_ice1712_gpio_write() go wrong, if snd_ice1712_gpio_write_bits() ran before and changed the gpio mask register. Read the actual gpio value and combine it with the to be set bits in the cpu instead. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24[ALSA] ice1724 - Improved the Juli rate settingPavel Hofman
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] ice1712, ice1724 - Code clean upTakashi Iwai
Clean up ice1712/ice1724 codes. The board-specific data is allocated locally in each code instead of having an ungly union in struct ice1712. Also, fix coding issues in prodigy_hifi.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules ↵Julian Scheel
Fortissimo IV See ALSA bug#2384 for more details. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] switching rate in STAC9460 codec of Prodigy192Pavel Hofman
* support for switching rate in STAC9460 - using set_rate_val of the akm infrastructure * listing all STAC9460 registers in proc * disabling mpu401 device for Prodigy192 - otherwise the currently flawed mpu401 code hangs kernel when opening the midi device * removing old unused commented-out code Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Add support of Onkyo SE-90PCI and SE-200PCIShin-ya Okada
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] ice1712 - Fix missing replacement to snd_ctl_boolean_mono_infoTakashi Iwai
There were some places I forgot to replace with snd_ctl_boolean_mono_info. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11[ALSA] ice1724 - Functioning support for Prodigy 192Pavel Hofman
Fixes: -------- * correct card specific ice1724 initialization * working IEC958 output of the card * renamed capture controls New features: ------------------ * analog input switch (line-in/mic) * optional ak4114 based MI/ODI/O card detection & support: IEC958 input, digital input switch (toslink/coax) Unresolved issues ----------------------- * Analog and digital input enums are listed on playback panel of alsamixer, I do not know how to push them onto the capture one. Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Add 'const' to files in pci/ice1712/Takashi Iwai
Mark a lot of data as 'const' Signed-of-by: Philipp Matthias Hahn <pmhahn@pmhahn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-02-09[ALSA] Enable the analog loopback of the Revolution 5.1Jochen Voss
Enable the analog loopback of the Revolution 5.1 card. This patch adds support for the PT2258 volume controller and modifies the Revolution 5.1 driver to make use of this facility. This allows to control the analog loopback of the card. Signed-off-by: Jochen Voss <voss@seehuhn.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-06-22[ALSA] ice1712 - Set mpu401 info flags from _card_infoAlan Horstmann
To permit use, in ice1712, of the mpu401 info flags recently added to mpu401_uart, adds info_flags in snd_ice1712_card_info so that additional flags can be set, if desired.  'MPU401_INFO_INTEGRATED' is always set with the ice1712.  The flags are passed on to snd_mpu401_uart_new(). _INFO_OUTPUT is set for DMX6fire mpu2. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22[ALSA] ice1712 - Provides specified midi port names instead of defaultsAlan Horstmann
Patch provides for the ice1712 card driver to overwrite the midi port name string given by default in mpu401_uart, with one specified in snd_ice1712_card_info. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-31[ALSA] Add Aux input switch control for Aureon UniverseMaximilian Rehkopf
This patch adds a mixer control which allows the user to switch the Aux playback between the internal Aux jack, Wavetable, and Rear Line-In on Aureon Universe cards. For switching, a PCA9554 (8-line GPIO with I2C interface) and a 74HC4052 (dual 4-way mux/demux) are used. Output 0 and 1 of the PCA9554 are connected to the select pins of the 74HC4052. The I2C interface of the PCA9554 is connected to the card's internal SPI bus which is also used to control the WM8770 and CS8415. SPI and I2C on the same lines... To communicate with the PCA9554 the WM8770 and CS8415 are disabled and an I2C Stop Condition is generated before the Start Condition (needed for synchronisation because other SPI traffic appear to confuse the PCA9554). Then a normal I2C data transfer takes place. Programming must be done ridiculously slow; in theory, 4.7us is the minimum delay time for normal-speed I2C according to the datasheet, but even with 10us switching was unreliable. The Windows driver from Terratec does the programming very slowly, too (checked with an oscilloscope). PCA9554 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9554_9554A_6.pdf 74HC4052 datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/74HC_HCT4052_4.pdf Signed-off-by: Maximilian Rehkopf <otakon@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ice1712 - disable unused ADCs & DACs on DMX6fireAlan Horstmann
Modules: ICE1712 driver Change the value written to hardware configuration register of envy24 chip in the case of Terratec DMX6fire to restrict the active ADCs & DACs to 6. Also add the dxr_enable module option to eventually leave the old behaviour when user requests. Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-03-22[ALSA] semaphore -> mutex (PCI part)Ingo Molnar
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03[ALSA] Remove xxx_t typedefs: PCI ICE1712Takashi Iwai
Modules: ICE1712 driver Remove xxx_t typedefs from the PCI ICE1712 driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29[ALSA] Provides preliminary support for the Terratec Phase 28 cardSimone Zinanni
ICE1712 driver Provides preliminary support for the Terratec Phase 28 card. Not extensively tested and probably buggy, but it seems to work. Signed-off-by: Simone Zinanni <simone@develer.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 07:35:33 +0000