summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2012-02-08Merge tag 'asoc-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus A few small WM8994 updates to go on top of the previous lot of things that were sent. They collide with some -next work so I'd really like to get them into 3.3-rc3 if possible to merge back up into the -next code. All driver specific and unexciting in the grand scheme of things.
2012-02-08ASoC: wm8994: Disable line output discharge prior to ramping VMIDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-08ASoC: wm8994: Fix typo in VMID ramp settingMark Brown
The VMID ramp rate is supposed to be 0x3, not 11b. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-08ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputsClemens Ladisch
The driver accidentally exchanged the left/right fields for stereo AC'97 mixer registers. This affected only the aux and CD inputs because the line input bypasses the AC'97 codec and the mic input is mono; cards without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected. Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.31+ <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-08ALSA: usb-audio: add Edirol UM-3G supportClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-07ALSA: hda - add support for Uniwill ECS M31EI notebookJaroslav Kysela
This hardware requires same fixup for the node 0x0f like Asus A6Rp. More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-07ALSA: hda - Fix error handling in patch_ca0132.cTakashi Iwai
In patch_ca0132.c, the error returned from chipio_write() isn't checked always. Also, the power-up/down sequence isn't tracked properly in some error paths. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-07Merge tag 'asoc-3.3' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus The only particularly remarkable change here is the one for handling of the Android suspend ignore code for idle_bias_off CODECs. That one is actually a regression fix as some of the new power savings that have been introduced confused the suspend ignore code, making devices that are active for non-audio reasons look like they are idle causing them to be suspended instead of being kept active.
2012-02-06ASoC: wm8994: Enabling VMID should take a runtime PM referenceMark Brown
We can enable VMID independently of the bias in some use cases so we need to ensure that the core device is powered up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-06ALSA: hda/realtek - Fix a wrong conditionTakashi Iwai
sparse complains that "spec->multiout.dac_nids" is a pointer. sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>) sound/pci/hda/patch_realtek.c:2321:37: left side has type unsigned short const [usertype] *dac_nids sound/pci/hda/patch_realtek.c:2321:37: right side has type int It was meant to be num_dacs instead of dac_nids. Although the current code still works as expected (when num_dacs is zero, dac_nids should be NULL, too), better to fix now, of course. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-06ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.cJesper Juhl
The header 'linux/moduleparam.h' is included twice in 'sound/isa/sb/emu8000_patch.c'. Once is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-03ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slavesTakashi Iwai
The recent changes in Realtek auto-parser added the new "Bass Speaker" and "CLFE" mixer elements which should be tracked as vmaster slaves, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Disable dynamic-power control for VIA as defaultTakashi Iwai
Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Allow analog low-current mode when dynamic power-control is onTakashi Iwai
VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Fix the logic to detect VIA analog low-current modeTakashi Iwai
The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-02ALSA: hda - Check power-state before changing in patch_via.cTakashi Iwai
Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-01ASoC: wm_hubs: Correct line input to line output 2 pathsMark Brown
The second line output mixer has the controls for the line input bypasses in the opposite order. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ALSA: HDA: Fix duplicated output to more than one codecDavid Henningsson
This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/924320 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-01ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master modeAxel Lin
For master mode, set Output [X|A|V]SP_SCLK Sourcing Mode to MCLK Mode. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm8962: Fix word length configurationSusan Gao
Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-01ALSA: hda - Fix calling cs_automic twice for Cirrus codecs.Dylan Reid
If cs_automic is called twice (like it is during init) while the mic is present, it will over-write the last_input with the new one, causing it to switch back to the automic input when the mic is unplugged. This leaves the driver in a state (cur_input, last_input, and automix_idx the same) where the internal mic can not be selected until it is rebooted without the mic attached. Check that the mic hasn't already been switched to before setting last_input. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-31ASoC: core: Better support for idle_bias_off suspend ignoresMark Brown
If an idle_bias_off device is in any state other than off then it is still active for some reason (typically a low power function such as accessory detection). This wasn't an issue when the feature was implemented as we always went to _ON for any active function, subsequent power improvements have changed things. With the modern way of doing things we should overhaul the infrastructure to allow devices to explicitly take references for these functions but that's a much more invasive change and will require driver updates to deploy, this will bring the framework into line with the existing driver set before we do that work. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-31ASoC: wm8994: Remove ASoC level register cache syncMark Brown
Now we've switched over to regmap the ASoC level cache sync will be ineffectual and potentially harmful as there is no longer an ASoC level cache. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31Merge branch 'fix/asoc' into for-linusTakashi Iwai
2012-01-31ALSA: HDA: Remove quirk for Toshiba Qosmio G50David Henningsson
The user reports that model=auto works better than current handling on a 3.2 based kernel (with jack detection patches backported). Since model=auto is what we prefer these days anyway, the quirk should be removed. Alsa-info for the relevant machine: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp BugLink: https://bugs.launchpad.net/bugs/923316 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-31ALSA: HDA: Fix jack creation for codecs with front and rear Line InDavid Henningsson
If a codec has both a front and a rear Line In, two controls both named "Line Jack" will be created, which causes parsing to fail. While a long term solution might be to name the jacks differently, this extra check is consistent with what is already being done in many auto-parsers, and will also protect against other cases when two inputs have the same label. BugLink: https://bugs.launchpad.net/bugs/923409 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-31ASoC: wm_hubs: Fix routing of input PGAs to line output mixerMark Brown
IN1L/R is routed to both line output mixers, we don't route IN1 to LINEOUT1 and IN2 to LINEOUT2. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-30ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660Takashi Iwai
It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-30ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machineDenis 'GNUtoo' Carikli
The Openmoko GTA01 machine has been removed from the machine ID database, so we need to remove references to it as well. Without that fix we have: sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’: sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixerUK KIM
Signed-off-by: UK KIM <w0806.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-27ALSA: HDA: Remove quirk for Asus N53JqDavid Henningsson
The user reports that he needs to add model=auto for audio to work properly. In fact, since node 0x15 is not even a pin node, the existing fixup is definitely wrong. Relevant information can be found in the buglink below. Cc: stable@kernel.org (3.2+) BugLink: https://bugs.launchpad.net/bugs/918254 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-26ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputsMark Brown
For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-26ALSA: hda - Fix silent output on Haier W18 laptopTakashi Iwai
The very same problem is seen on Haier W18 laptop with ALC861 as seen on ASUS A6Rp, which was fixed by the commit 3b25eb69. Now we just need to add a new SSID entry pointing to the same fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-25ASoC: wm5100: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8962: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm8996: Mark register cache as dirty when regulators are disabledMark Brown
Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ASoC: wm5100: Fix microphone configurationMark Brown
We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-01-25ASoC: wm5100: Make sure we switch to button reporting modeMark Brown
When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-25ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSIDGustavo Maciel Dias Vieira
HP laptop models with buggy BIOS are apparently frequent, including machines with different codecs. Set the polarity of the mute led based on the SSID and include an entry for the HP Mini 110-3100. Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org> Tested-by: Predrag Ivanovic <predivan@open.telekom.rs> Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-25ALSA: hda - Fix silent output on ASUS A6RpTakashi Iwai
The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-24ALSA: Fix memory leak on error in snd_compr_set_params()Jesper Juhl
If copy_from_user() does not return 0 we'll leak the memory we allocated for 'params' when that variable goes out of scope. Also a small CodingStyle cleanup: Use braces on both branches of if/else when one branch needs it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-24ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't supportRaymond Yau
- check SDAC bit of AC97 primary codec when create "rear" device 3, "4ch" device 2 and "4ch Duplication" switch as the card need a four channels AC97 codec to support surround40. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-24ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on errorJesper Juhl
In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: wm8958: Use correct format string in dev_err() callJesper Juhl
To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptopsTakashi Iwai
The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-23ALSA: HDA: Use model=auto for Thinkpad T510David Henningsson
The user reports that model=auto works fine for him. Using model=auto bring in new features such as jack detection notification to userspace. Alsa info is available at http://paste.ubuntu.com/805351/ Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-23ALSA: hda - Fix buffer-alignment regression with Nvidia HDMITakashi Iwai
The commit 2ae66c26550cd94b0e2606a9275eb0ab7070ad0e ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-22ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown
We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-20ASoC: mxs: Fix mxs-saif timeoutFabio Estevam
On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Disable register synchronisation for low frequency WM8996 SYSCLKMark Brown
With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 12:09:41 +0000