summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/powerpc
AgeCommit message (Collapse)Author
2021-07-20selftests/powerpc: Fix "no_handler" EBB selftestAthira Rajeev
[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ] The "no_handler_test" in ebb selftests attempts to read the PMU registers twice via helper function "dump_ebb_state". First dump is just before closing of event and the second invocation is done after closing of the event. The original intention of second dump_ebb_state was to dump the state of registers at the end of the test when the counters are frozen. But this will be achieved with the first call itself since sample period is set to low value and PMU will be frozen by then. Hence patch removes the dump which was done before closing of the event. Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-03selftests/powerpc: Purge extra count_pmc() calls of ebb selftestsDesnes A. Nunes do Rosario
[ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ] An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count. Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test): ========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004 >> [30]: register SPRN_PMC1 = 0x000000004000051e PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ========== Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-15selftests/powerpc: Kill child processes on SIGINTBreno Leitao
[ Upstream commit 7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ] There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailableMichael Ellerman
[ Upstream commit cd4a6f3ab4d80cb919d15897eb3cbc85c2009d4b ] The subpage_prot syscall is only functional when the system is using the Hash MMU. Since commit 5b2b80714796 ("powerpc/mm: Invalidate subpage_prot() system call on radix platforms") it returns ENOENT when the Radix MMU is active. Currently this just makes the test fail. Additionally the syscall is not available if the kernel is built with 4K pages, or if CONFIG_PPC_SUBPAGE_PROT=n, in which case it returns ENOSYS because the syscall is missing entirely. So check explicitly for ENOENT and ENOSYS and skip if we see either of those. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13selftests/powerpc: Fix TM resched DSCR test with some compilersMichael Ellerman
[ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ] The tm-resched-dscr test has started failing sometimes, depending on what compiler it's built with, eg: test: tm_resched_dscr Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed. !! child died by signal 6 When it fails we see that the compiler doesn't initialise rv to 1 before entering the inline asm block. Although that's counter intuitive, it is allowed because we tell the compiler that the inline asm will write to rv (using "=r"), meaning the original value is irrelevant. Marking it as a read/write parameter would presumably work, but it seems simpler to fix it by setting the initial value of rv in the inline asm. Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16selftest/powerpc: Fix false failures for skipped testsSachin Sant
[ Upstream commit a6d8a21596df041f36f4c2ccc260c459e3e851f1 ] Tests under alignment subdirectory are skipped when executed on previous generation hardware, but harness still marks them as failed. test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [FAIL] The MAGIC_SKIP_RETURN_VALUE value assigned to rc variable is retained till the program exit which causes the test to be marked as failed. This patch resets the value before returning to the main() routine. With this patch the test o/p is as follows: test: test_copy_unaligned tags: git_version:unknown [SKIP] Test skipped on line 26 skip: test_copy_unaligned selftests: copy_unaligned [PASS] Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26selftest/powerpc: Wrong PMC initialized in pmc56_overflow testMadhavan Srinivasan
commit df21d2fa733035e4d414379960f94b2516b41296 upstream. Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-05Merge tag 'powerpc-4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...
2015-10-19selftests/powerpc: Run EBB tests only on POWER8Denis Kirjanov
EBB (Event Based Branches) are currently only available on POWER8, so we should skip them on other CPUs. I've found that at least one test loops forever on 970MP (cycles_with_freeze_test). Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> [mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Allow the tm-syscall test to build with old headersMichael Ellerman
When building against older kernel headers, currently the tm-syscall test fails to build because PPC_FEATURE2_HTM_NOSC is not defined. Tweak the test so that if PPC_FEATURE2_HTM_NOSC is not defined it still builds, but prints a warning at run time and marks the test as skipped. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Sort the list of SUB_DIRS to buildMichael Ellerman
This list has gotten too long. Split it into individual lines and sort them, so in future we can add new entries more cleanly. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Add tests of unmuxed IPC callsMichael Ellerman
This is just a simple test which confirms that the individual IPC syscalls are all available. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-13selftests/powerpc: Fix build failure of load_unaligned_zeropad testMichael Ellerman
Commit 7a5692e6e533 ("arch/powerpc: provide zero_bytemask() for big-endian") added a call to __fls() in our word-at-a-time.h. That was fine for the kernel build but missed the fact that we also use word-at-a-time.h in a userspace test. Pulling in the kernel version of __fls() gets messy, so just define our own, it's unlikely to change often. Fixes: 7a5692e6e533 ("arch/powerpc: provide zero_bytemask() for big-endian") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/selftest: Add gettimeofday() benchmarkMichael Neuling
This adds a benchmark directory to the powerpc selftests and adds a gettimeofday() benchmark to it. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-17selftests/powerpc: Install tempfile so the subpage_prot_file test worksMichael Ellerman
We forgot to install the tempfile, so when the selftests are installed and then run the subpage_prot_file test fails. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-19powerpc/tm: Abort syscalls in active transactionsSam bobroff
This patch changes the syscall handler to doom (tabort) active transactions when a syscall is made and return very early without performing the syscall and keeping side effects to a minimum (no CPU accounting or system call tracing is performed). Also included is a new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this behaviour to userspace. Currently, the system call instruction automatically suspends an active transaction which causes side effects to persist when an active transaction fails. This does change the kernel's behaviour, but in a way that was documented as unsupported. It doesn't reduce functionality as syscalls will still be performed after tsuspend; it just requires that the transaction be explicitly suspended. It also provides a consistent interface and makes the behaviour of user code substantially the same across powerpc and platforms that do not support suspended transactions (e.g. x86 and s390). Performance measurements using http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of a normal (non-aborted) system call increases by about 0.25%. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add gitignore file for the new DSCR testsAnshuman Khandual
This patch adds .gitignore for all the newly added DSCR tests. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add thread based stress test for DSCR sysfs interfacesMichael Ellerman
This patch adds a test to update the system wide DSCR value repeatedly and then verifies that any thread on any given CPU on the system must be able to see the same DSCR value whether its is being read through the problem state based SPR or the privilege state based SPR. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for all DSCR sysfs interfacesAnshuman Khandual
This test continuously updates the system wide DSCR default value in the sysfs interface and makes sure that the same is reflected across all the sysfs interfaces for each individual CPUs present on the system. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR inheritence across fork & execAnshuman Khandual
This patch adds a test case to verify that the changed DSCR value inside any process would be inherited to it's child across the fork and exec system call. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR value inheritence across forkAnshuman Khandual
This patch adds a test to verify that the changed DSCR value inside any process would be inherited to it's child process across the fork system call. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR SPR numbersAnshuman Khandual
This patch adds a test which verifies that the DSCR privilege and problem state SPR read & write accesses while making sure that the results are always the same irrespective of which SPR number is being used. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for explicitly changing DSCR valueAnshuman Khandual
This patch adds a test which modifies the DSCR using mtspr instruction and verifies the change using mfspr instruction. It uses both the privilege state SPR as well as the problem state SPR for the purpose. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for system wide DSCR defaultAnshuman Khandual
This patch adds a test case for the system wide DSCR default value, which when changed through it's sysfs interface must be visible to all threads reading DSCR either through the privilege state SPR or the problem state SPR. The DSCR value change should be immediate as well. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-02selftests/powerpc: Add install support to more powerpc testsMichael Ellerman
These tests were merged in parallel to the install support, update them now to use it. This also adds cross compile support for the VPHN test which was missing it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-01selftests/powerpc: Fix the pmu install ruleMichael Ellerman
My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea44b84 ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-30Revert "powerpc/tm: Abort syscalls in active transactions"Michael Ellerman
This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-16Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-15mm, selftests: test return value of munmap for MAP_HUGETLB memoryDavid Rientjes
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned, otherwise it fails with -EINVAL. All tests currently behave correctly, but it's better to explcitly test the return value for completeness and document the requirement, especially if users copy map_hugetlb.c as a sample implementation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joern Engel <joern@logfs.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Eric B Munson <emunson@akamai.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-11selftests/powerpc: Add transactional syscall testSam bobroff
Check that a syscall made during an active transaction will fail with the correct failure code and that one made during a suspended transaction will succeed. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11selftests/powerpc: Move get_auxv_entry() to harness.cSam bobroff
Move get_auxv_entry() from pmu/lib.c up to harness.c in order to make it available to other tests. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-28selftests/powerpc: Add a test of the switch_endian() syscallMichael Ellerman
This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-19selftests: Set CC using CROSS_COMPILE once in lib.mkMichael Ellerman
This avoids repeating the logic in every Makefile. We mimic the top-level Makefile and use $(CROSS_COMPILE)gcc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19selftests: Add install support for the powerpc testsMichael Ellerman
The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-18selftests/powerpc: Rename TARGETS in powerpc selftests makefileMichael Ellerman
This patch changes the name of the make variable TARGETS, to prevent it from colliding with a value set by the user on the command line (as they are recommended to do by tools/testing/selftests/README.txt). Without this patch, "make -C tools/testing/selftests TARGETS=powerpc" will fail. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-18selftests/powerpc: Add test for VPHNGreg Kurz
The goal is to verify vphn_unpack_associativity() parses VPHN numbers correctly. We feed it with a variety of input values and compare with expected results. PAPR+ does not say much about VPHN parsing: I came up with a list of tests that check many simple cases and some corner ones. I wouldn't dare to say the list is exhaustive though. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [mpe: Rework harness logic, rename to test-vphn, add -m64] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-03-17selftests/powerpc: Build the copyloops with -maltivecMichael Ellerman
The recent change to remove the vrX defines exposed the fact that we are building the copyloops tests without altivec enabled. It depends on the toolchain as to whether altivec is on by default or not, so it only breaks on some toolchains. But we should always enable it. Fixes: c2ce6f9f3dc0 ("powerpc: Change vrX register defines to vX to match gcc and glibc") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16powerpc: Change vrX register defines to vX to match gcc and glibcAnton Blanchard
As our various loops (copy, string, crypto etc) get more complicated, we want to share implementations between userspace (eg glibc) and the kernel. We also want to write userspace test harnesses to put in tools/testing/selftest. One gratuitous difference between userspace and the kernel is the VMX register definitions - the kernel uses vrX whereas both gcc and glibc use vX. Change the kernel to match userspace. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Add memcmp testcaseAnton Blanchard
Add a testcase for the new ppc64 memcmp. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Add subpage protection self test.Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> mpe: Fix compile errors and formatting. Add tempfile logic to Makefile. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Make git ignore all binaries in powerpc test suiteAnshuman Khandual
This patch includes all of the powerpc test binaries into the .gitignore file listing in their respective directories. This will make sure that git ignores all of these test binaries when displaying status. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30selftests/powerpc: Add test of load_unaligned_zero_pad()Michael Ellerman
It is a rarely exercised case, so we want to have a test to ensure it works as required. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-07-28selftests/powerpc: Add test of per-event excludesMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Add a routine for retrieving an AUXV entryMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Add cycles test with MMCR2 handlingMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Dump MMCR2 as part of the EBB HW stateMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Count more instructions & use decimalMichael Ellerman
Although we expect some small discrepancies for very large counts, we seem to be able to count up to 64 billion instructions without too much skew, so do so. Also switch to using decimals for the instruction counts. This just makes it easier to visually compare the expected vs actual values, as well as the raw result from instructions. Before: instructions: result 68719476753 running/enabled 13101961654 cycles: result 38077343785 running/enabled 13101725752 Looped for 68719476736 instructions, overhead 17 Expected 68719476753 Actual 68719476753 Delta 0, 0.000000% success: count_instructions After: instructions: result 64000000016 running/enabled 12197599964 cycles: result 35412471674 running/enabled 12197534110 Looped for 64000000000 instructions, overhead 16 Expected 64000000016 Actual 64000000016 Delta 0, 0.000000% success: count_instructions Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Count instructions under scheduler pressureMichael Ellerman
Have a task eat some cpu while we are counting instructions to create some scheduler pressure. The idea being to try and unearth any bugs we have in counting that only appear when context switching is happening. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Add test of L3 bank handlingMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-28selftests/powerpc: Move core_busy_loop() into asmMichael Ellerman
There is at least one bug in core_busy_loop(), we use r0, but it's not in the clobber list. We were getting away with this it seems but that was luck. It's also fishy to be touching the stack, even if we do it below the stack pointer. It seems we get away with it, but looking at the generated code that may just be luck. So move it into assembler, do all the stack handling by hand. We create a stack frame to save the non-volatiles in, so we can muck around with them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 11:00:24 +0000