From 930cd6e46eadce8b8ed2a232ee536e5fd286c152 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 21 Jan 2014 11:22:05 +0100 Subject: batman-adv: fix soft-interface MTU computation The current MTU computation always returns a value smaller than 1500bytes even if the real interfaces have an MTU large enough to compensate the batman-adv overhead. Fix the computation by properly returning the highest admitted value. Introduced by a19d3d85e1b854e4a483a55d740a42458085560d ("batman-adv: limit local translation table max size") Reported-by: Russell Senior Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/hard-interface.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index 3d417d3641c6..b851cc580853 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -241,7 +241,7 @@ int batadv_hardif_min_mtu(struct net_device *soft_iface) { struct batadv_priv *bat_priv = netdev_priv(soft_iface); const struct batadv_hard_iface *hard_iface; - int min_mtu = ETH_DATA_LEN; + int min_mtu = INT_MAX; rcu_read_lock(); list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) { @@ -256,8 +256,6 @@ int batadv_hardif_min_mtu(struct net_device *soft_iface) } rcu_read_unlock(); - atomic_set(&bat_priv->packet_size_max, min_mtu); - if (atomic_read(&bat_priv->fragmentation) == 0) goto out; @@ -268,13 +266,21 @@ int batadv_hardif_min_mtu(struct net_device *soft_iface) min_mtu = min_t(int, min_mtu, BATADV_FRAG_MAX_FRAG_SIZE); min_mtu -= sizeof(struct batadv_frag_packet); min_mtu *= BATADV_FRAG_MAX_FRAGMENTS; - atomic_set(&bat_priv->packet_size_max, min_mtu); - - /* with fragmentation enabled we can fragment external packets easily */ - min_mtu = min_t(int, min_mtu, ETH_DATA_LEN); out: - return min_mtu - batadv_max_header_len(); + /* report to the other components the maximum amount of bytes that + * batman-adv can send over the wire (without considering the payload + * overhead). For example, this value is used by TT to compute the + * maximum local table table size + */ + atomic_set(&bat_priv->packet_size_max, min_mtu); + + /* the real soft-interface MTU is computed by removing the payload + * overhead from the maximum amount of bytes that was just computed. + * + * However batman-adv does not support MTUs bigger than ETH_DATA_LEN + */ + return min_t(int, min_mtu - batadv_max_header_len(), ETH_DATA_LEN); } /* adjusts the MTU if a new interface with a smaller MTU appeared. */ -- cgit v1.2.3 From e889241f45f9cecbc84a6ffed577083ab52e62ee Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Mon, 27 Jan 2014 12:23:28 +0100 Subject: batman-adv: fix TT-TVLV parsing on OGM reception When accessing a TT-TVLV container in the OGM RX path the variable pointing to the list of changes to apply is altered by mistake. This makes the TT component read data at the wrong position in the OGM packet buffer. Fix it by removing the bogus pointer alteration. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/translation-table.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index b6071f675a3e..beba13fbd10a 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -3218,7 +3218,6 @@ static void batadv_tt_update_orig(struct batadv_priv *bat_priv, spin_lock_bh(&orig_node->tt_lock); - tt_change = (struct batadv_tvlv_tt_change *)tt_buff; batadv_tt_update_changes(bat_priv, orig_node, tt_num_changes, ttvn, tt_change); -- cgit v1.2.3 From 91c2b1a9f680ff105369d49abc7e19ca7efb33e1 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 28 Jan 2014 02:06:47 +0100 Subject: batman-adv: release vlan object after checking the CRC There is a refcounter unbalance in the CRC checking routine invoked on OGM reception. A vlan object is retrieved (thus its refcounter is increased by one) but it is never properly released. This leads to a memleak because the vlan object will never be free'd. Fix this by releasing the vlan object after having read the CRC. Reported-by: Russell Senior Reported-by: Daniel Reported-by: cmsv Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/translation-table.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index beba13fbd10a..c21c5572c860 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -2262,6 +2262,7 @@ static bool batadv_tt_global_check_crc(struct batadv_orig_node *orig_node, { struct batadv_tvlv_tt_vlan_data *tt_vlan_tmp; struct batadv_orig_node_vlan *vlan; + uint32_t crc; int i; /* check if each received CRC matches the locally stored one */ @@ -2281,7 +2282,10 @@ static bool batadv_tt_global_check_crc(struct batadv_orig_node *orig_node, if (!vlan) return false; - if (vlan->tt.crc != ntohl(tt_vlan_tmp->crc)) + crc = vlan->tt.crc; + batadv_orig_node_vlan_free_ref(vlan); + + if (crc != ntohl(tt_vlan_tmp->crc)) return false; } -- cgit v1.2.3 From f1791425cf0bcda43ab9a9a37df1ad3ccb1f6654 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Thu, 30 Jan 2014 00:12:24 +0100 Subject: batman-adv: properly check pskb_may_pull return value pskb_may_pull() returns 1 on success and 0 in case of failure, therefore checking for the return value being negative does not make sense at all. This way if the function fails we will probably read beyond the current skb data buffer. Fix this by doing the proper check. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/routing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index 1ed9f7c9ecea..c26f07368849 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -688,7 +688,7 @@ static int batadv_check_unicast_ttvn(struct batadv_priv *bat_priv, int is_old_ttvn; /* check if there is enough data before accessing it */ - if (pskb_may_pull(skb, hdr_len + ETH_HLEN) < 0) + if (!pskb_may_pull(skb, hdr_len + ETH_HLEN)) return 0; /* create a copy of the skb (in case of for re-routing) to modify it. */ -- cgit v1.2.3 From 08bf0ed29c7ded45c477d08618220dd200c3524a Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Wed, 29 Jan 2014 11:25:12 +0100 Subject: batman-adv: avoid potential race condition when adding a new neighbour When adding a new neighbour it is important to atomically perform the following: - check if the neighbour already exists - append the neighbour to the proper list If the two operations are not performed in an atomic context it is possible that two concurrent insertions add the same neighbour twice. Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/bat_iv_ogm.c | 22 ++++++++++++++++------ net/batman-adv/originator.c | 36 ++++++++++++++++++++++++++++++++++++ net/batman-adv/originator.h | 4 ++++ 3 files changed, 56 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 512159bf607f..094ae7ca50a0 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -266,7 +266,7 @@ batadv_iv_ogm_neigh_new(struct batadv_hard_iface *hard_iface, struct batadv_orig_node *orig_neigh) { struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface); - struct batadv_neigh_node *neigh_node; + struct batadv_neigh_node *neigh_node, *tmp_neigh_node; neigh_node = batadv_neigh_node_new(hard_iface, neigh_addr, orig_node); if (!neigh_node) @@ -281,14 +281,24 @@ batadv_iv_ogm_neigh_new(struct batadv_hard_iface *hard_iface, neigh_node->orig_node = orig_neigh; neigh_node->if_incoming = hard_iface; - batadv_dbg(BATADV_DBG_BATMAN, bat_priv, - "Creating new neighbor %pM for orig_node %pM on interface %s\n", - neigh_addr, orig_node->orig, hard_iface->net_dev->name); - spin_lock_bh(&orig_node->neigh_list_lock); - hlist_add_head_rcu(&neigh_node->list, &orig_node->neigh_list); + tmp_neigh_node = batadv_neigh_node_get(orig_node, hard_iface, + neigh_addr); + if (!tmp_neigh_node) { + hlist_add_head_rcu(&neigh_node->list, &orig_node->neigh_list); + } else { + kfree(neigh_node); + batadv_hardif_free_ref(hard_iface); + neigh_node = tmp_neigh_node; + } spin_unlock_bh(&orig_node->neigh_list_lock); + if (!tmp_neigh_node) + batadv_dbg(BATADV_DBG_BATMAN, bat_priv, + "Creating new neighbor %pM for orig_node %pM on interface %s\n", + neigh_addr, orig_node->orig, + hard_iface->net_dev->name); + out: return neigh_node; } diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index 6df12a2e3605..853941629dc1 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -457,6 +457,42 @@ out: return neigh_node; } +/** + * batadv_neigh_node_get - retrieve a neighbour from the list + * @orig_node: originator which the neighbour belongs to + * @hard_iface: the interface where this neighbour is connected to + * @addr: the address of the neighbour + * + * Looks for and possibly returns a neighbour belonging to this originator list + * which is connected through the provided hard interface. + * Returns NULL if the neighbour is not found. + */ +struct batadv_neigh_node * +batadv_neigh_node_get(const struct batadv_orig_node *orig_node, + const struct batadv_hard_iface *hard_iface, + const uint8_t *addr) +{ + struct batadv_neigh_node *tmp_neigh_node, *res = NULL; + + rcu_read_lock(); + hlist_for_each_entry_rcu(tmp_neigh_node, &orig_node->neigh_list, list) { + if (!batadv_compare_eth(tmp_neigh_node->addr, addr)) + continue; + + if (tmp_neigh_node->if_incoming != hard_iface) + continue; + + if (!atomic_inc_not_zero(&tmp_neigh_node->refcount)) + continue; + + res = tmp_neigh_node; + break; + } + rcu_read_unlock(); + + return res; +} + /** * batadv_orig_ifinfo_free_rcu - free the orig_ifinfo object * @rcu: rcu pointer of the orig_ifinfo object diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h index 37be290f63f6..db3a9ed734cb 100644 --- a/net/batman-adv/originator.h +++ b/net/batman-adv/originator.h @@ -29,6 +29,10 @@ void batadv_orig_node_free_ref_now(struct batadv_orig_node *orig_node); struct batadv_orig_node *batadv_orig_node_new(struct batadv_priv *bat_priv, const uint8_t *addr); struct batadv_neigh_node * +batadv_neigh_node_get(const struct batadv_orig_node *orig_node, + const struct batadv_hard_iface *hard_iface, + const uint8_t *addr); +struct batadv_neigh_node * batadv_neigh_node_new(struct batadv_hard_iface *hard_iface, const uint8_t *neigh_addr, struct batadv_orig_node *orig_node); -- cgit v1.2.3 From b2262df7fcf2c395eca564df83238e931d88d7bf Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Sat, 8 Feb 2014 16:45:06 +0100 Subject: batman-adv: fix potential orig_node reference leak Since batadv_orig_node_new() sets the refcount to two, assuming that the calling function will use a reference for putting the orig_node into a hash or similar, both references must be freed if initialization of the orig_node fails. Otherwise that object may be leaked in that error case. Reported-by: Antonio Quartulli Signed-off-by: Simon Wunderlich Signed-off-by: Marek Lindner Signed-off-by: Antonio Quartulli --- net/batman-adv/bat_iv_ogm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 094ae7ca50a0..42cbc0a68941 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -254,6 +254,8 @@ batadv_iv_ogm_orig_get(struct batadv_priv *bat_priv, const uint8_t *addr) free_bcast_own: kfree(orig_node->bat_iv.bcast_own); free_orig_node: + /* free twice, as batadv_orig_node_new sets refcount to 2 */ + batadv_orig_node_free_ref(orig_node); batadv_orig_node_free_ref(orig_node); return NULL; -- cgit v1.2.3 From a30e22ca8464c2dc573e0144a972221c2f06c2cd Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 11 Feb 2014 17:05:06 +0100 Subject: batman-adv: fix TT CRC computation by ensuring byte order When computing the CRC on a 2byte variable the order of the bytes obviously alters the final result. This means that computing the CRC over the same value on two archs having different endianess leads to different numbers. The global and local translation table CRC computation routine makes this mistake while processing the clients VIDs. The result is a continuous CRC mismatching between nodes having different endianess. Fix this by converting the VID to Network Order before processing it. This guarantees that every node uses the same byte order. Introduced by 7ea7b4a142758deaf46c1af0ca9ceca6dd55138b ("batman-adv: make the TT CRC logic VLAN specific") Reported-by: Russel Senior Signed-off-by: Antonio Quartulli Tested-by: Russell Senior Signed-off-by: Marek Lindner --- net/batman-adv/translation-table.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index c21c5572c860..959dde721c46 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1975,6 +1975,7 @@ static uint32_t batadv_tt_global_crc(struct batadv_priv *bat_priv, struct hlist_head *head; uint32_t i, crc_tmp, crc = 0; uint8_t flags; + __be16 tmp_vid; for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -2011,8 +2012,11 @@ static uint32_t batadv_tt_global_crc(struct batadv_priv *bat_priv, orig_node)) continue; - crc_tmp = crc32c(0, &tt_common->vid, - sizeof(tt_common->vid)); + /* use network order to read the VID: this ensures that + * every node reads the bytes in the same order. + */ + tmp_vid = htons(tt_common->vid); + crc_tmp = crc32c(0, &tmp_vid, sizeof(tmp_vid)); /* compute the CRC on flags that have to be kept in sync * among nodes @@ -2046,6 +2050,7 @@ static uint32_t batadv_tt_local_crc(struct batadv_priv *bat_priv, struct hlist_head *head; uint32_t i, crc_tmp, crc = 0; uint8_t flags; + __be16 tmp_vid; for (i = 0; i < hash->size; i++) { head = &hash->table[i]; @@ -2064,8 +2069,11 @@ static uint32_t batadv_tt_local_crc(struct batadv_priv *bat_priv, if (tt_common->flags & BATADV_TT_CLIENT_NEW) continue; - crc_tmp = crc32c(0, &tt_common->vid, - sizeof(tt_common->vid)); + /* use network order to read the VID: this ensures that + * every node reads the bytes in the same order. + */ + tmp_vid = htons(tt_common->vid); + crc_tmp = crc32c(0, &tmp_vid, sizeof(tmp_vid)); /* compute the CRC on flags that have to be kept in sync * among nodes -- cgit v1.2.3 From 05c3c8a636aa9ee35ce13f65afc5b665615cc786 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 11 Feb 2014 17:05:07 +0100 Subject: batman-adv: free skb on TVLV parsing success When the TVLV parsing routine succeed the skb is left untouched thus leading to a memory leak. Fix this by consuming the skb in case of success. Introduced by ef26157747d42254453f6b3ac2bd8bd3c53339c3 ("batman-adv: tvlv - basic infrastructure") Reported-by: Russel Senior Signed-off-by: Antonio Quartulli Tested-by: Russell Senior Signed-off-by: Marek Lindner --- net/batman-adv/routing.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c index c26f07368849..a953d5b196a3 100644 --- a/net/batman-adv/routing.c +++ b/net/batman-adv/routing.c @@ -918,6 +918,8 @@ int batadv_recv_unicast_tvlv(struct sk_buff *skb, if (ret != NET_RX_SUCCESS) ret = batadv_route_unicast_packet(skb, recv_if); + else + consume_skb(skb); return ret; } -- cgit v1.2.3 From a5a5cb8cab526af2f6cbe9715f8ca843192f0d81 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sat, 15 Feb 2014 02:17:20 +0100 Subject: batman-adv: avoid double free when orig_node initialization fails In the failure path of the orig_node initialization routine the orig_node->bat_iv.bcast_own field is free'd twice: first in batadv_iv_ogm_orig_get() and then later in batadv_orig_node_free_rcu(). Fix it by removing the kfree in batadv_iv_ogm_orig_get(). Signed-off-by: Antonio Quartulli Signed-off-by: Marek Lindner --- net/batman-adv/bat_iv_ogm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 42cbc0a68941..8323bced8e5b 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -241,18 +241,16 @@ batadv_iv_ogm_orig_get(struct batadv_priv *bat_priv, const uint8_t *addr) size = bat_priv->num_ifaces * sizeof(uint8_t); orig_node->bat_iv.bcast_own_sum = kzalloc(size, GFP_ATOMIC); if (!orig_node->bat_iv.bcast_own_sum) - goto free_bcast_own; + goto free_orig_node; hash_added = batadv_hash_add(bat_priv->orig_hash, batadv_compare_orig, batadv_choose_orig, orig_node, &orig_node->hash_entry); if (hash_added != 0) - goto free_bcast_own; + goto free_orig_node; return orig_node; -free_bcast_own: - kfree(orig_node->bat_iv.bcast_own); free_orig_node: /* free twice, as batadv_orig_node_new sets refcount to 2 */ batadv_orig_node_free_ref(orig_node); -- cgit v1.2.3 From 70b271a78beba787155d6696aacd7c4d4a251c50 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sat, 15 Feb 2014 21:50:37 +0100 Subject: batman-adv: fix potential kernel paging error for unicast transmissions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit batadv_send_skb_prepare_unicast(_4addr) might reallocate the skb's data. If it does then our ethhdr pointer is not valid anymore in batadv_send_skb_unicast(), resulting in a kernel paging error. Fixing this by refetching the ethhdr pointer after the potential reallocation. Signed-off-by: Linus Lüssing Signed-off-by: Antonio Quartulli --- net/batman-adv/send.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c index 579f5f00a385..843febd1e519 100644 --- a/net/batman-adv/send.c +++ b/net/batman-adv/send.c @@ -254,9 +254,9 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node, unsigned short vid) { - struct ethhdr *ethhdr = (struct ethhdr *)skb->data; + struct ethhdr *ethhdr; struct batadv_unicast_packet *unicast_packet; - int ret = NET_XMIT_DROP; + int ret = NET_XMIT_DROP, hdr_size; if (!orig_node) goto out; @@ -265,12 +265,16 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv, case BATADV_UNICAST: if (!batadv_send_skb_prepare_unicast(skb, orig_node)) goto out; + + hdr_size = sizeof(*unicast_packet); break; case BATADV_UNICAST_4ADDR: if (!batadv_send_skb_prepare_unicast_4addr(bat_priv, skb, orig_node, packet_subtype)) goto out; + + hdr_size = sizeof(struct batadv_unicast_4addr_packet); break; default: /* this function supports UNICAST and UNICAST_4ADDR only. It @@ -279,6 +283,7 @@ static int batadv_send_skb_unicast(struct batadv_priv *bat_priv, goto out; } + ethhdr = (struct ethhdr *)(skb->data + hdr_size); unicast_packet = (struct batadv_unicast_packet *)skb->data; /* inform the destination node that we are still missing a correct route -- cgit v1.2.3