From a26302628ad164980493ab7768a05a7f3a8d8842 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 1 Mar 2013 13:07:00 +0000 Subject: iio:ad5064: Fix address of the second channel for ad5065/ad5045/ad5025 The ad5065, ad5045, ad5025 use address '3' for the second channel, so they need their own channel spec. Note that ad5064_sync_powerdown_mode() also needs to be slightly updated since it was relying on the fact that chan->address always equaled chan->channel. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5064.c | 49 ++++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 20 deletions(-) diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index 2fe1d4edcb2f..7b777083cb48 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -27,7 +27,6 @@ #define AD5064_ADDR(x) ((x) << 20) #define AD5064_CMD(x) ((x) << 24) -#define AD5064_ADDR_DAC(chan) (chan) #define AD5064_ADDR_ALL_DAC 0xF #define AD5064_CMD_WRITE_INPUT_N 0x0 @@ -131,15 +130,15 @@ static int ad5064_write(struct ad5064_state *st, unsigned int cmd, } static int ad5064_sync_powerdown_mode(struct ad5064_state *st, - unsigned int channel) + const struct iio_chan_spec *chan) { unsigned int val; int ret; - val = (0x1 << channel); + val = (0x1 << chan->address); - if (st->pwr_down[channel]) - val |= st->pwr_down_mode[channel] << 8; + if (st->pwr_down[chan->channel]) + val |= st->pwr_down_mode[chan->channel] << 8; ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0); @@ -169,7 +168,7 @@ static int ad5064_set_powerdown_mode(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); st->pwr_down_mode[chan->channel] = mode + 1; - ret = ad5064_sync_powerdown_mode(st, chan->channel); + ret = ad5064_sync_powerdown_mode(st, chan); mutex_unlock(&indio_dev->mlock); return ret; @@ -205,7 +204,7 @@ static ssize_t ad5064_write_dac_powerdown(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); st->pwr_down[chan->channel] = pwr_down; - ret = ad5064_sync_powerdown_mode(st, chan->channel); + ret = ad5064_sync_powerdown_mode(st, chan); mutex_unlock(&indio_dev->mlock); return ret ? ret : len; } @@ -292,34 +291,44 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = { { }, }; -#define AD5064_CHANNEL(chan, bits) { \ +#define AD5064_CHANNEL(chan, addr, bits) { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .output = 1, \ .channel = (chan), \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ - .address = AD5064_ADDR_DAC(chan), \ + .address = addr, \ .scan_type = IIO_ST('u', (bits), 16, 20 - (bits)), \ .ext_info = ad5064_ext_info, \ } #define DECLARE_AD5064_CHANNELS(name, bits) \ const struct iio_chan_spec name[] = { \ - AD5064_CHANNEL(0, bits), \ - AD5064_CHANNEL(1, bits), \ - AD5064_CHANNEL(2, bits), \ - AD5064_CHANNEL(3, bits), \ - AD5064_CHANNEL(4, bits), \ - AD5064_CHANNEL(5, bits), \ - AD5064_CHANNEL(6, bits), \ - AD5064_CHANNEL(7, bits), \ + AD5064_CHANNEL(0, 0, bits), \ + AD5064_CHANNEL(1, 1, bits), \ + AD5064_CHANNEL(2, 2, bits), \ + AD5064_CHANNEL(3, 3, bits), \ + AD5064_CHANNEL(4, 4, bits), \ + AD5064_CHANNEL(5, 5, bits), \ + AD5064_CHANNEL(6, 6, bits), \ + AD5064_CHANNEL(7, 7, bits), \ +} + +#define DECLARE_AD5065_CHANNELS(name, bits) \ +const struct iio_chan_spec name[] = { \ + AD5064_CHANNEL(0, 0, bits), \ + AD5064_CHANNEL(1, 3, bits), \ } static DECLARE_AD5064_CHANNELS(ad5024_channels, 12); static DECLARE_AD5064_CHANNELS(ad5044_channels, 14); static DECLARE_AD5064_CHANNELS(ad5064_channels, 16); +static DECLARE_AD5065_CHANNELS(ad5025_channels, 12); +static DECLARE_AD5065_CHANNELS(ad5045_channels, 14); +static DECLARE_AD5065_CHANNELS(ad5065_channels, 16); + static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { [ID_AD5024] = { .shared_vref = false, @@ -328,7 +337,7 @@ static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { }, [ID_AD5025] = { .shared_vref = false, - .channels = ad5024_channels, + .channels = ad5025_channels, .num_channels = 2, }, [ID_AD5044] = { @@ -338,7 +347,7 @@ static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { }, [ID_AD5045] = { .shared_vref = false, - .channels = ad5044_channels, + .channels = ad5045_channels, .num_channels = 2, }, [ID_AD5064] = { @@ -353,7 +362,7 @@ static const struct ad5064_chip_info ad5064_chip_info_tbl[] = { }, [ID_AD5065] = { .shared_vref = false, - .channels = ad5064_channels, + .channels = ad5065_channels, .num_channels = 2, }, [ID_AD5628_1] = { -- cgit v1.2.3 From c5ef717a774b326a6708e2e14ddf9957b619d5c4 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 1 Mar 2013 13:07:00 +0000 Subject: iio:ad5064: Fix off by one in DAC value range check The DAC value range check allows values one larger than the maximum value, which effectively results in setting the DAC value to 0. This patch fixes the issue. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5064.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index 7b777083cb48..f724a54bf334 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -257,7 +257,7 @@ static int ad5064_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - if (val > (1 << chan->scan_type.realbits) || val < 0) + if (val >= (1 << chan->scan_type.realbits) || val < 0) return -EINVAL; mutex_lock(&indio_dev->mlock); -- cgit v1.2.3 From f77ae9d8fd4b8ed984f33e996c62f2dfd9f73b37 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 1 Mar 2013 13:07:00 +0000 Subject: iio:ad5064: Initialize register cache correctly Initialize the register cache to the proper mid-scale value based on the resolution of the device. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5064.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c index f724a54bf334..74f2d52795f6 100644 --- a/drivers/iio/dac/ad5064.c +++ b/drivers/iio/dac/ad5064.c @@ -438,6 +438,7 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, { struct iio_dev *indio_dev; struct ad5064_state *st; + unsigned int midscale; unsigned int i; int ret; @@ -474,11 +475,6 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, goto error_free_reg; } - for (i = 0; i < st->chip_info->num_channels; ++i) { - st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K; - st->dac_cache[i] = 0x8000; - } - indio_dev->dev.parent = dev; indio_dev->name = name; indio_dev->info = &ad5064_info; @@ -486,6 +482,13 @@ static int ad5064_probe(struct device *dev, enum ad5064_type type, indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; + midscale = (1 << indio_dev->channels[0].scan_type.realbits) / 2; + + for (i = 0; i < st->chip_info->num_channels; ++i) { + st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K; + st->dac_cache[i] = midscale; + } + ret = iio_device_register(indio_dev); if (ret) goto error_disable_reg; -- cgit v1.2.3 From da0d4ef27ca1407e64b2ac9e75d2ca60bb83b618 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 1 Mar 2013 15:21:00 +0000 Subject: iio/imu: inv_mpu6050 depends on IIO_BUFFER MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix: drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c: In function ‘inv_mpu6050_read_fifo’: drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c:176:3: error: implicit declaration of function ‘iio_push_to_buffers’ [-Werror=implicit-function-declaration] Signed-off-by: Guenter Roeck Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index b5cfa3a354cf..361b2328453d 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -5,6 +5,7 @@ config INV_MPU6050_IIO tristate "Invensense MPU6050 devices" depends on I2C && SYSFS + select IIO_BUFFER select IIO_TRIGGERED_BUFFER help This driver supports the Invensense MPU6050 devices. -- cgit v1.2.3 From 5a4d729139b4e94f670288a3505657311f95c886 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 1 Mar 2013 15:57:00 +0000 Subject: iio: Fix build error seen if IIO_TRIGGER is defined but IIO_BUFFER is not MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If CONFIG_IIO_TRIGGER is defined but CONFIG_IIO_BUFFER is not, the following build error is seen. drivers/iio/common/st_sensors/st_sensors_trigger.c:21:5: error: redefinition of ‘st_sensors_allocate_trigger’ In file included from drivers/iio/common/st_sensors/st_sensors_trigger.c:18:0: include/linux/iio/common/st_sensors.h:239:19: note: previous definition of ‘st_sensors_allocate_trigger’ was here drivers/iio/common/st_sensors/st_sensors_trigger.c:65:6: error: redefinition of ‘st_sensors_deallocate_trigger’ In file included from drivers/iio/common/st_sensors/st_sensors_trigger.c:18:0: include/linux/iio/common/st_sensors.h:244:20: note: previous definition of ‘st_sensors_deallocate_trigger’ was here This occurs because st_sensors_deallocate_trigger is built if CONFIG_IIO_TRIGGER is defined, but the dummy function is compiled if CONFIG_IIO_BUFFER is defined. Signed-off-by: Guenter Roeck Acked-by: Denis Ciocca Signed-off-by: Jonathan Cameron --- include/linux/iio/common/st_sensors.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 1f86a97ab2e2..8bd12be0b02f 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -227,14 +227,17 @@ struct st_sensor_data { }; #ifdef CONFIG_IIO_BUFFER +irqreturn_t st_sensors_trigger_handler(int irq, void *p); + +int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); +#endif + +#ifdef CONFIG_IIO_TRIGGER int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops); void st_sensors_deallocate_trigger(struct iio_dev *indio_dev); -irqreturn_t st_sensors_trigger_handler(int irq, void *p); - -int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf); #else static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) -- cgit v1.2.3 From 852afe99fc1c2d2b1376e49f128a3b929e811f2d Mon Sep 17 00:00:00 2001 From: Denis CIOCCA Date: Tue, 26 Feb 2013 10:43:00 +0000 Subject: iio:common:st_sensors fixed all warning messages about uninitialized variables Signed-off-by: Denis Ciocca Reported-by: Fengguang Wu Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 0198324a8b0c..bd33473f8e38 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -62,7 +62,7 @@ st_sensors_match_odr_error: int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr) { int err; - struct st_sensor_odr_avl odr_out; + struct st_sensor_odr_avl odr_out = {0, 0}; struct st_sensor_data *sdata = iio_priv(indio_dev); err = st_sensors_match_odr(sdata->sensor, odr, &odr_out); @@ -114,7 +114,7 @@ st_sensors_match_odr_error: static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs) { - int err, i; + int err, i = 0; struct st_sensor_data *sdata = iio_priv(indio_dev); err = st_sensors_match_fs(sdata->sensor, fs, &i); @@ -139,14 +139,13 @@ st_accel_set_fullscale_error: int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable) { - bool found; u8 tmp_value; int err = -EINVAL; - struct st_sensor_odr_avl odr_out; + bool found = false; + struct st_sensor_odr_avl odr_out = {0, 0}; struct st_sensor_data *sdata = iio_priv(indio_dev); if (enable) { - found = false; tmp_value = sdata->sensor->pw.value_on; if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) && (sdata->sensor->odr.mask == sdata->sensor->pw.mask)) { -- cgit v1.2.3 From 6987a6dabfc40222ef767f67b57212fe3a0225fb Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Mon, 18 Feb 2013 19:54:18 +0000 Subject: staging: vt6656: Fix oops on resume from suspend. Remove usb_put_dev from vt6656_suspend and usb_get_dev from vt6566_resume. These are not normally in suspend/resume functions. Signed-off-by: Malcolm Priestley Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/main_usb.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index d5f53e1a74a2..a5063a6f64d9 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -669,8 +669,6 @@ static int vt6656_suspend(struct usb_interface *intf, pm_message_t message) if (device->flags & DEVICE_FLAGS_OPENED) device_close(device->dev); - usb_put_dev(interface_to_usbdev(intf)); - return 0; } @@ -681,8 +679,6 @@ static int vt6656_resume(struct usb_interface *intf) if (!device || !device->dev) return -ENODEV; - usb_get_dev(interface_to_usbdev(intf)); - if (!(device->flags & DEVICE_FLAGS_OPENED)) device_open(device->dev); -- cgit v1.2.3 From d49c3d61cfdb33165d2760817ec9601d277575d4 Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Fri, 22 Feb 2013 10:07:03 -0800 Subject: staging: comedi: drivers: usbdux.c: fix DMA buffers on stack fix for instances of DMA buffer on stack(being passed to usb_control_msg) for the USB-DUX-D Board driver. Signed-off-by: Kumar Amit Mehta Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 1a0062a04456..6aac1f60bc42 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -730,10 +730,14 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb) static int usbduxsub_start(struct usbduxsub *usbduxsub) { int errcode = 0; - uint8_t local_transfer_buffer[16]; + uint8_t *local_transfer_buffer; + + local_transfer_buffer = kmalloc(1, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to zero */ - local_transfer_buffer[0] = 0; + *local_transfer_buffer = 0; errcode = usb_control_msg(usbduxsub->usbdev, /* create a pipe for a control transfer */ usb_sndctrlpipe(usbduxsub->usbdev, 0), @@ -751,22 +755,25 @@ static int usbduxsub_start(struct usbduxsub *usbduxsub) 1, /* Timeout */ BULK_TIMEOUT); - if (errcode < 0) { + if (errcode < 0) dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (start)\n"); - return errcode; - } - return 0; + + kfree(local_transfer_buffer); + return errcode; } static int usbduxsub_stop(struct usbduxsub *usbduxsub) { int errcode = 0; + uint8_t *local_transfer_buffer; - uint8_t local_transfer_buffer[16]; + local_transfer_buffer = kmalloc(1, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to one */ - local_transfer_buffer[0] = 1; + *local_transfer_buffer = 1; errcode = usb_control_msg(usbduxsub->usbdev, usb_sndctrlpipe(usbduxsub->usbdev, 0), /* bRequest, "Firmware" */ @@ -781,12 +788,12 @@ static int usbduxsub_stop(struct usbduxsub *usbduxsub) 1, /* Timeout */ BULK_TIMEOUT); - if (errcode < 0) { + if (errcode < 0) dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (stop)\n"); - return errcode; - } - return 0; + + kfree(local_transfer_buffer); + return errcode; } static int usbduxsub_upload(struct usbduxsub *usbduxsub, -- cgit v1.2.3 From 161f440c8d915181b34f5a64f52a543beca6b1e9 Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Fri, 22 Feb 2013 10:07:30 -0800 Subject: staging: comedi: drivers: usbduxfast.c: fix for DMA buffers on stack fix for instances of DMA buffer on stack(being passed to usb_control_msg) for the USB-DUXfast Board driver. Signed-off-by: Kumar Amit Mehta Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxfast.c | 30 +++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index 4bf5dd094dc9..1ba0e3df492d 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -436,10 +436,14 @@ static void usbduxfastsub_ai_Irq(struct urb *urb) static int usbduxfastsub_start(struct usbduxfastsub_s *udfs) { int ret; - unsigned char local_transfer_buffer[16]; + unsigned char *local_transfer_buffer; + + local_transfer_buffer = kmalloc(1, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to zero */ - local_transfer_buffer[0] = 0; + *local_transfer_buffer = 0; /* bRequest, "Firmware" */ ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, @@ -450,22 +454,25 @@ static int usbduxfastsub_start(struct usbduxfastsub_s *udfs) local_transfer_buffer, 1, /* Length */ EZTIMEOUT); /* Timeout */ - if (ret < 0) { + if (ret < 0) dev_err(&udfs->interface->dev, "control msg failed (start)\n"); - return ret; - } - return 0; + kfree(local_transfer_buffer); + return ret; } static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs) { int ret; - unsigned char local_transfer_buffer[16]; + unsigned char *local_transfer_buffer; + + local_transfer_buffer = kmalloc(1, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to one */ - local_transfer_buffer[0] = 1; + *local_transfer_buffer = 1; /* bRequest, "Firmware" */ ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, @@ -474,13 +481,12 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs) 0x0000, /* Index */ local_transfer_buffer, 1, /* Length */ EZTIMEOUT); /* Timeout */ - if (ret < 0) { + if (ret < 0) dev_err(&udfs->interface->dev, "control msg failed (stop)\n"); - return ret; - } - return 0; + kfree(local_transfer_buffer); + return ret; } static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs, -- cgit v1.2.3 From 47b1be5c0f4ed4991f3d956dbd7ba69cb5bc521f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 20 Feb 2013 10:57:01 +0800 Subject: staging: imx/drm: request irq only after adding the crtc If the bootloader already enabled the display, the interrupt handler will be called as soon as it is registered. If the CRTC is not already added at this time, the call to imx_drm_handle_vblank will result in a NULL pointer dereference. The patch fixes a kernel panic [1], which has been on linux-next since Jan 8 [2]. [1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/218858 [2] http://thread.gmane.org/gmane.linux.ports.arm.kernel/208192 Signed-off-by: Philipp Zabel Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- drivers/staging/imx-drm/ipuv3-crtc.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index 4b3a019409b5..b028b0d1317b 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -483,17 +483,6 @@ static int ipu_get_resources(struct ipu_crtc *ipu_crtc, goto err_out; } - ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch, - IPU_IRQ_EOF); - ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0, - "imx_drm", ipu_crtc); - if (ret < 0) { - dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret); - goto err_out; - } - - disable_irq(ipu_crtc->irq); - return 0; err_out: ipu_put_resources(ipu_crtc); @@ -504,6 +493,7 @@ err_out: static int ipu_crtc_init(struct ipu_crtc *ipu_crtc, struct ipu_client_platformdata *pdata) { + struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent); int ret; ret = ipu_get_resources(ipu_crtc, pdata); @@ -522,6 +512,17 @@ static int ipu_crtc_init(struct ipu_crtc *ipu_crtc, goto err_put_resources; } + ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch, + IPU_IRQ_EOF); + ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0, + "imx_drm", ipu_crtc); + if (ret < 0) { + dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret); + goto err_put_resources; + } + + disable_irq(ipu_crtc->irq); + return 0; err_put_resources: -- cgit v1.2.3 From b5ae11463a67a5e468dd67482ab2308994da9b2b Mon Sep 17 00:00:00 2001 From: Kumar Amit Mehta Date: Thu, 21 Feb 2013 22:07:08 -0800 Subject: staging: comedi: drivers: usbduxsigma.c: fix DMA buffers on stack This patch fixes an instance of DMA buffer on stack(being passed to usb_control_msg)for the USB-DUXsigma Board driver. Found using smatch. Signed-off-by: Kumar Amit Mehta Reviewed-by: Dan Carpenter Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbduxsigma.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c index d066351a71b2..a728c8fc32a2 100644 --- a/drivers/staging/comedi/drivers/usbduxsigma.c +++ b/drivers/staging/comedi/drivers/usbduxsigma.c @@ -681,7 +681,11 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb) static int usbduxsub_start(struct usbduxsub *usbduxsub) { int errcode = 0; - uint8_t local_transfer_buffer[16]; + uint8_t *local_transfer_buffer; + + local_transfer_buffer = kmalloc(16, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to zero */ local_transfer_buffer[0] = 0; @@ -702,19 +706,22 @@ static int usbduxsub_start(struct usbduxsub *usbduxsub) 1, /* Timeout */ BULK_TIMEOUT); - if (errcode < 0) { + if (errcode < 0) dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (start)\n"); - return errcode; - } - return 0; + + kfree(local_transfer_buffer); + return errcode; } static int usbduxsub_stop(struct usbduxsub *usbduxsub) { int errcode = 0; + uint8_t *local_transfer_buffer; - uint8_t local_transfer_buffer[16]; + local_transfer_buffer = kmalloc(16, GFP_KERNEL); + if (!local_transfer_buffer) + return -ENOMEM; /* 7f92 to one */ local_transfer_buffer[0] = 1; @@ -732,12 +739,12 @@ static int usbduxsub_stop(struct usbduxsub *usbduxsub) 1, /* Timeout */ BULK_TIMEOUT); - if (errcode < 0) { + if (errcode < 0) dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (stop)\n"); - return errcode; - } - return 0; + + kfree(local_transfer_buffer); + return errcode; } static int usbduxsub_upload(struct usbduxsub *usbduxsub, -- cgit v1.2.3 From aa1e1234826e21197f818ca0abf519775ad4eb5c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 4 Mar 2013 20:42:00 +0100 Subject: staging/vt6656: Fix too large integer constant warning on 32-bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/staging/vt6656/card.c: In function ‘CARDqGetNextTBTT’: drivers/staging/vt6656/card.c:793: warning: integer constant is too large for ‘unsigned long’ type Commit c7b7cad0d8df823ea063c86a54316bbcbfa04a7c ("staging/vt6656: Fix sparse warning constant 0xffffffff00000000U is so big it is unsigned long") changed the constant to "0xffffffff00000000UL", but that only works on 64-bit. Change it "0xffffffff00000000ULL" to fix it for 32-bit, too. Signed-off-by: Geert Uytterhoeven Reviewed-by: Peter Huewe Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c index 22918a106d73..d2479b766450 100644 --- a/drivers/staging/vt6656/card.c +++ b/drivers/staging/vt6656/card.c @@ -790,7 +790,7 @@ u64 CARDqGetNextTBTT(u64 qwTSF, WORD wBeaconInterval) if ((~uLowNextTBTT) < uLowRemain) qwTSF = ((qwTSF >> 32) + 1) << 32; - qwTSF = (qwTSF & 0xffffffff00000000UL) | + qwTSF = (qwTSF & 0xffffffff00000000ULL) | (u64)(uLowNextTBTT + uLowRemain); return (qwTSF); -- cgit v1.2.3 From 564c526a1bed5e42b5cd52cfe1752c4296ef17a6 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 5 Mar 2013 13:13:44 +0000 Subject: staging: comedi: dt9812: use CR_CHAN() for channel number As pointed out by Dan Carpenper in , the dt9812 comedi driver's use of the `chanspec` member of `struct comedi_insn` as a channel number is incorrect. Change it to use `CR_CHAN(insn->chanspec)` as the channel number (where `insn` is a pointer to the `struct comedi_insn` being processed). Reported-by: Dan Carpenter Cc: stable # 3.8 onwards Cc: Anders Blomdell Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt9812.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index 192cf088f834..57b451904791 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -947,12 +947,13 @@ static int dt9812_di_rinsn(struct comedi_device *dev, unsigned int *data) { struct comedi_dt9812 *devpriv = dev->private; + unsigned int channel = CR_CHAN(insn->chanspec); int n; u8 bits = 0; dt9812_digital_in(devpriv->slot, &bits); for (n = 0; n < insn->n; n++) - data[n] = ((1 << insn->chanspec) & bits) != 0; + data[n] = ((1 << channel) & bits) != 0; return n; } @@ -961,12 +962,13 @@ static int dt9812_do_winsn(struct comedi_device *dev, unsigned int *data) { struct comedi_dt9812 *devpriv = dev->private; + unsigned int channel = CR_CHAN(insn->chanspec); int n; u8 bits = 0; dt9812_digital_out_shadow(devpriv->slot, &bits); for (n = 0; n < insn->n; n++) { - u8 mask = 1 << insn->chanspec; + u8 mask = 1 << channel; bits &= ~mask; if (data[n]) @@ -981,13 +983,13 @@ static int dt9812_ai_rinsn(struct comedi_device *dev, unsigned int *data) { struct comedi_dt9812 *devpriv = dev->private; + unsigned int channel = CR_CHAN(insn->chanspec); int n; for (n = 0; n < insn->n; n++) { u16 value = 0; - dt9812_analog_in(devpriv->slot, insn->chanspec, &value, - DT9812_GAIN_1); + dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1); data[n] = value; } return n; @@ -998,12 +1000,13 @@ static int dt9812_ao_rinsn(struct comedi_device *dev, unsigned int *data) { struct comedi_dt9812 *devpriv = dev->private; + unsigned int channel = CR_CHAN(insn->chanspec); int n; u16 value; for (n = 0; n < insn->n; n++) { value = 0; - dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value); + dt9812_analog_out_shadow(devpriv->slot, channel, &value); data[n] = value; } return n; @@ -1014,10 +1017,11 @@ static int dt9812_ao_winsn(struct comedi_device *dev, unsigned int *data) { struct comedi_dt9812 *devpriv = dev->private; + unsigned int channel = CR_CHAN(insn->chanspec); int n; for (n = 0; n < insn->n; n++) - dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]); + dt9812_analog_out(devpriv->slot, channel, data[n]); return n; } -- cgit v1.2.3