From a8323a85377619afd0ca6240c90e3668940c247c Mon Sep 17 00:00:00 2001 From: Miao Zhong Date: Mon, 23 Jul 2018 20:56:58 +0800 Subject: iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register [ Upstream commit 0d535967ac658966c6ade8f82b5799092f7d5441 ] When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed. Cc: Will Deacon Cc: Robin Murphy Signed-off-by: Miao Zhong Signed-off-by: Will Deacon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/iommu/arm-smmu-v3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 347aaaa5a7ea..fc6eb752ab35 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1219,6 +1219,7 @@ static irqreturn_t arm_smmu_priq_thread(int irq, void *dev) /* Sync our overflow flag, as we believe we're up to speed */ q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons); + writel(q->cons, q->cons_reg); return IRQ_HANDLED; } -- cgit v1.2.3 From 5df13ba493746f4b4a4d8f8bbf7c6bc86c7a899b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:00:48 +0200 Subject: ALSA: msnd: Fix the default sample sizes [ Upstream commit 7c500f9ea139d0c9b80fdea5a9c911db3166ea54 ] The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/isa/msnd/msnd_pinnacle.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index a31ea6c22d19..2d7379dec1f0 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -82,10 +82,10 @@ static void set_default_audio_parameters(struct snd_msnd *chip) { - chip->play_sample_size = DEFSAMPLESIZE; + chip->play_sample_size = snd_pcm_format_width(DEFSAMPLESIZE); chip->play_sample_rate = DEFSAMPLERATE; chip->play_channels = DEFCHANNELS; - chip->capture_sample_size = DEFSAMPLESIZE; + chip->capture_sample_size = snd_pcm_format_width(DEFSAMPLESIZE); chip->capture_sample_rate = DEFSAMPLERATE; chip->capture_channels = DEFCHANNELS; } -- cgit v1.2.3 From 650ca59a640ba016d3a29555cdbc5c2623c753e9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:00:46 +0200 Subject: ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro [ Upstream commit bd1cd0eb2ce9141100628d476ead4de485501b29 ] AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/usb/quirks-table.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 69bf5cf1e91e..15cbe2565703 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -2875,7 +2875,8 @@ YAMAHA_DEVICE(0x7010, "UB99"), */ #define AU0828_DEVICE(vid, pid, vname, pname) { \ - USB_DEVICE_VENDOR_SPEC(vid, pid), \ + .idVendor = vid, \ + .idProduct = pid, \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ USB_DEVICE_ID_MATCH_INT_SUBCLASS, \ -- cgit v1.2.3 From 1e89472ff0635fc68c19e44ec552ed8a9d6e71e4 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 25 Jul 2018 16:54:33 +0800 Subject: xfrm: fix 'passing zero to ERR_PTR()' warning [ Upstream commit 934ffce1343f22ed5e2d0bd6da4440f4848074de ] Fix a static code checker warning: net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR' xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR. Fixes: d809ec895505 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by: YueHaibing Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- net/xfrm/xfrm_policy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index e9eecf6f0bff..48080f89ed25 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1845,7 +1845,10 @@ xfrm_resolve_and_create_bundle(struct xfrm_policy **pols, int num_pols, /* Try to instantiate a bundle */ err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family); if (err <= 0) { - if (err != 0 && err != -EAGAIN) + if (err == 0) + return NULL; + + if (err != -EAGAIN) XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR); return ERR_PTR(err); } -- cgit v1.2.3 From 9e8d585c52c5db4780c53f949cd3fdb9d6a50b54 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Wed, 25 Jul 2018 18:45:08 +0100 Subject: gfs2: Special-case rindex for gfs2_grow [ Upstream commit 776125785a87ff05d49938bd5b9f336f2a05bff6 ] To speed up the common case of appending to a file, gfs2_write_alloc_required presumes that writing beyond the end of a file will always require additional blocks to be allocated. This assumption is incorrect for preallocates files, but there are no negative consequences as long as *some* space is still left on the filesystem. One special file that always has some space preallocated beyond the end of the file is the rindex: when growing a filesystem, gfs2_grow adds one or more new resource groups and appends records describing those resource groups to the rindex; the preallocated space ensures that this is always possible. However, when a filesystem is completely full, gfs2_write_alloc_required will indicate that an additional allocation is required, and appending the next record to the rindex will fail even though space for that record has already been preallocated. To fix that, skip the incorrect optimization in gfs2_write_alloc_required, but for the rindex only. Other writes to preallocated space beyond the end of the file are still allowed to fail on completely full filesystems. Signed-off-by: Andreas Gruenbacher Reviewed-by: Bob Peterson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- fs/gfs2/bmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 61296ecbd0e2..09476bb8f6cd 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1476,7 +1476,7 @@ int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset, end_of_file = (i_size_read(&ip->i_inode) + sdp->sd_sb.sb_bsize - 1) >> shift; lblock = offset >> shift; lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift; - if (lblock_stop > end_of_file) + if (lblock_stop > end_of_file && ip != GFS2_I(sdp->sd_rindex)) return 1; size = (lblock_stop - lblock) << shift; -- cgit v1.2.3 From 210006efbb7a8dfd1c0356df939073f65e7d1ad8 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 13 Jul 2018 13:13:20 +0200 Subject: clk: imx6ul: fix missing of_node_put() [ Upstream commit 11177e7a7aaef95935592072985526ebf0a3df43 ] of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by: Nicholas Mc Guire Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support") Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/clk/imx/clk-imx6ul.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index 01718d05e952..9e8f0e255de2 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -120,6 +120,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-anatop"); base = of_iomap(np, 0); + of_node_put(np); WARN_ON(!base); clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); -- cgit v1.2.3 From d6ac46c7db364c3dd4b328a9e6616c9f26985f2b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 20 Jul 2018 16:46:33 +0900 Subject: kbuild: add .DELETE_ON_ERROR special target MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ] If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- scripts/Kbuild.include | 3 +++ 1 file changed, 3 insertions(+) diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 31a981d6229d..5897fc3857a0 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -359,3 +359,6 @@ endif endef # ############################################################################### + +# delete partially updated (i.e. corrupted) files on error +.DELETE_ON_ERROR: -- cgit v1.2.3 From 46c66ac938163769834ce38a298c65795ff9e0bc Mon Sep 17 00:00:00 2001 From: John Keeping Date: Tue, 17 Jul 2018 11:48:16 +0100 Subject: dmaengine: pl330: fix irq race with terminate_all [ Upstream commit e49756544a21f5625b379b3871d27d8500764670 ] In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by: John Keeping Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/dma/pl330.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 8db791ef2027..95619ee33112 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2132,13 +2132,14 @@ static int pl330_terminate_all(struct dma_chan *chan) pm_runtime_get_sync(pl330->ddma.dev); spin_lock_irqsave(&pch->lock, flags); + spin_lock(&pl330->lock); _stop(pch->thread); - spin_unlock(&pl330->lock); - pch->thread->req[0].desc = NULL; pch->thread->req[1].desc = NULL; pch->thread->req_running = -1; + spin_unlock(&pl330->lock); + power_down = pch->active; pch->active = false; -- cgit v1.2.3 From 9f6d6fb580c0f26cd7ae75dfe75063f4ccc6ccca Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 20 Jul 2018 13:58:22 +0200 Subject: MIPS: ath79: fix system restart [ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ] This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts. Signed-off-by: Felix Fietkau Signed-off-by: John Crispin Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19913/ Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/mips/ath79/setup.c | 1 + arch/mips/include/asm/mach-ath79/ath79.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 8755d618e116..961c393c0f55 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -44,6 +44,7 @@ static char ath79_sys_type[ATH79_SYS_TYPE_LEN]; static void ath79_restart(char *command) { + local_irq_disable(); ath79_device_reset_set(AR71XX_RESET_FULL_CHIP); for (;;) if (cpu_wait) diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 4eee221b0cf0..d2be8e4f7a35 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -133,6 +133,7 @@ static inline u32 ath79_pll_rr(unsigned reg) static inline void ath79_reset_wr(unsigned reg, u32 val) { __raw_writel(val, ath79_reset_base + reg); + (void) __raw_readl(ath79_reset_base + reg); /* flush */ } static inline u32 ath79_reset_rr(unsigned reg) -- cgit v1.2.3 From 0eda7472163dbda62a0ac27d3e89851f0e603eba Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 5 Jul 2018 04:25:19 -0400 Subject: media: videobuf2-core: check for q->error in vb2_core_qbuf() [ Upstream commit b509d733d337417bcb7fa4a35be3b9a49332b724 ] The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/media/v4l2-core/videobuf2-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c index 0c1a42bf27fd..1c37d5a78822 100644 --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -1366,6 +1366,11 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb) struct vb2_buffer *vb; int ret; + if (q->error) { + dprintk(1, "fatal error occurred on queue\n"); + return -EIO; + } + vb = q->bufs[index]; switch (vb->state) { -- cgit v1.2.3 From 66e32b788f4f3336cdff64ebed24c290a8ae8589 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 24 Jul 2018 11:29:01 -0700 Subject: mtd/maps: fix solutionengine.c printk format warnings [ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ] Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx". Fixes these build warnings: ../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x Cc: David Woodhouse Cc: Brian Norris Cc: Boris Brezillon Cc: Marek Vasut Cc: Richard Weinberger Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato Cc: Rich Felker Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov Signed-off-by: Randy Dunlap Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/maps/solutionengine.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index bb580bc16445..c07f21b20463 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -59,9 +59,9 @@ static int __init init_soleng_maps(void) return -ENXIO; } } - printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", - soleng_flash_map.phys & 0x1fffffff, - soleng_eprom_map.phys & 0x1fffffff); + printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n", + &soleng_flash_map.phys, + &soleng_eprom_map.phys); flash_mtd->owner = THIS_MODULE; eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map); -- cgit v1.2.3 From 98c059565202926a5ede0c3c04df4c152abd17a1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 24 Jul 2018 19:11:28 +0200 Subject: fbdev: omapfb: off by one in omapfb_register_client() [ Upstream commit 5ec1ec35b2979b59d0b33381e7c9aac17e159d16 ] The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver") Signed-off-by: Dan Carpenter Cc: Imre Deak Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/omap/omapfb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c index 393ae1bc07e8..a8a6f072fb78 100644 --- a/drivers/video/fbdev/omap/omapfb_main.c +++ b/drivers/video/fbdev/omap/omapfb_main.c @@ -977,7 +977,7 @@ int omapfb_register_client(struct omapfb_notifier_block *omapfb_nb, { int r; - if ((unsigned)omapfb_nb->plane_idx > OMAPFB_PLANE_NUM) + if ((unsigned)omapfb_nb->plane_idx >= OMAPFB_PLANE_NUM) return -EINVAL; if (!notifier_inited) { -- cgit v1.2.3 From 1401b76dfbccc4c8bd6718e2437e112593995b7d Mon Sep 17 00:00:00 2001 From: Anton Vasilyev Date: Tue, 24 Jul 2018 19:11:27 +0200 Subject: video: goldfishfb: fix memory leak on driver remove [ Upstream commit 5958fde72d04e7b8c6de3669d1f794a90997e3eb ] goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev Cc: Aleksandar Markovic Cc: Miodrag Dinic Cc: Goran Ferenc Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/goldfishfb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/fbdev/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c index 7f6c9e6cfc6c..14a93cb21310 100644 --- a/drivers/video/fbdev/goldfishfb.c +++ b/drivers/video/fbdev/goldfishfb.c @@ -301,6 +301,7 @@ static int goldfish_fb_remove(struct platform_device *pdev) dma_free_coherent(&pdev->dev, framesize, (void *)fb->fb.screen_base, fb->fb.fix.smem_start); iounmap(fb->reg_base); + kfree(fb); return 0; } -- cgit v1.2.3 From 5a85c8d629cbd5731c9eda6cc1a7c041d027683f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 24 Jul 2018 19:11:27 +0200 Subject: fbdev/via: fix defined but not used warning [ Upstream commit b6566b47a67e07fdca44cf51abb14e2fbe17d3eb ] Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap Cc: Florian Tobias Schandinat Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/via/viafbdev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c index badee04ef496..71b5dca95bdb 100644 --- a/drivers/video/fbdev/via/viafbdev.c +++ b/drivers/video/fbdev/via/viafbdev.c @@ -19,6 +19,7 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include #include #include #include @@ -1468,7 +1469,7 @@ static const struct file_operations viafb_vt1636_proc_fops = { #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */ -static int viafb_sup_odev_proc_show(struct seq_file *m, void *v) +static int __maybe_unused viafb_sup_odev_proc_show(struct seq_file *m, void *v) { via_odev_to_seq(m, supported_odev_map[ viaparinfo->shared->chip_info.gfx_chip_name]); -- cgit v1.2.3 From e71975f0d7d5821d384af9fac2c06a67619a962f Mon Sep 17 00:00:00 2001 From: Sandipan Das Date: Tue, 10 Jul 2018 19:28:14 +0530 Subject: perf powerpc: Fix callchain ip filtering when return address is in a register [ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ] For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 : 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by: Ravi Bangoria Signed-off-by: Sandipan Das Cc: Jiri Olsa Cc: Maynard Johnson Cc: Naveen N. Rao Cc: Ravi Bangoria Cc: Sukadev Bhattiprolu Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index bd630c222e65..9d1f6e976a5a 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -58,9 +58,13 @@ static int check_return_reg(int ra_regno, Dwarf_Frame *frame) } /* - * Check if return address is on the stack. + * Check if return address is on the stack. If return address + * is in a register (typically R0), it is yet to be saved on + * the stack. */ - if (nops != 0 || ops != NULL) + if ((nops != 0 || ops != NULL) && + !(nops == 1 && ops[0].atom == DW_OP_regx && + ops[0].number2 == 0 && ops[0].offset == 0)) return 0; /* -- cgit v1.2.3 From 57a1dd74441dc0c0ff5f0968138f4d82e556c80f Mon Sep 17 00:00:00 2001 From: Fredrik Noring Date: Tue, 24 Jul 2018 19:11:24 +0200 Subject: fbdev: Distinguish between interlaced and progressive modes [ Upstream commit 1ba0a59cea41ea05fda92daaf2a2958a2246b9cf ] I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c: }, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED }, In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account. In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match. Signed-off-by: Fredrik Noring Cc: "Maciej W. Rozycki" [b.zolnierkie: updated patch description] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/modedb.c | 41 ++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c index 2510fa728d77..de119f11b78f 100644 --- a/drivers/video/fbdev/core/modedb.c +++ b/drivers/video/fbdev/core/modedb.c @@ -644,7 +644,7 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info, * * Valid mode specifiers for @mode_option: * - * x[M][R][-][@][i][m] or + * x[M][R][-][@][i][p][m] or * [-][@] * * with , , and decimal numbers and @@ -653,10 +653,10 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info, * If 'M' is present after yres (and before refresh/bpp if present), * the function will compute the timings using VESA(tm) Coordinated * Video Timings (CVT). If 'R' is present after 'M', will compute with - * reduced blanking (for flatpanels). If 'i' is present, compute - * interlaced mode. If 'm' is present, add margins equal to 1.8% - * of xres rounded down to 8 pixels, and 1.8% of yres. The char - * 'i' and 'm' must be after 'M' and 'R'. Example: + * reduced blanking (for flatpanels). If 'i' or 'p' are present, compute + * interlaced or progressive mode. If 'm' is present, add margins equal + * to 1.8% of xres rounded down to 8 pixels, and 1.8% of yres. The chars + * 'i', 'p' and 'm' must be after 'M' and 'R'. Example: * * 1024x768MR-8@60m - Reduced blank with margins at 60Hz. * @@ -697,7 +697,8 @@ int fb_find_mode(struct fb_var_screeninfo *var, unsigned int namelen = strlen(name); int res_specified = 0, bpp_specified = 0, refresh_specified = 0; unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0; - int yres_specified = 0, cvt = 0, rb = 0, interlace = 0; + int yres_specified = 0, cvt = 0, rb = 0; + int interlace_specified = 0, interlace = 0; int margins = 0; u32 best, diff, tdiff; @@ -748,9 +749,17 @@ int fb_find_mode(struct fb_var_screeninfo *var, if (!cvt) margins = 1; break; + case 'p': + if (!cvt) { + interlace = 0; + interlace_specified = 1; + } + break; case 'i': - if (!cvt) + if (!cvt) { interlace = 1; + interlace_specified = 1; + } break; default: goto done; @@ -819,11 +828,21 @@ done: if ((name_matches(db[i], name, namelen) || (res_specified && res_matches(db[i], xres, yres))) && !fb_try_mode(var, info, &db[i], bpp)) { - if (refresh_specified && db[i].refresh == refresh) - return 1; + const int db_interlace = (db[i].vmode & + FB_VMODE_INTERLACED ? 1 : 0); + int score = abs(db[i].refresh - refresh); + + if (interlace_specified) + score += abs(db_interlace - interlace); + + if (!interlace_specified || + db_interlace == interlace) + if (refresh_specified && + db[i].refresh == refresh) + return 1; - if (abs(db[i].refresh - refresh) < diff) { - diff = abs(db[i].refresh - refresh); + if (score < diff) { + diff = score; best = i; } } -- cgit v1.2.3 From 016353ef55c98bf9d743007e4ffedf5949ef175b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 24 Jul 2018 18:48:14 +0200 Subject: ARM: exynos: Clear global variable on init error path [ Upstream commit cd4806911cee3901bc2b5eb95603cf1958720b57 ] For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region). Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-exynos/suspend.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index c169cc3049aa..e8adb428dddb 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -260,6 +260,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node, NULL); if (!domain) { iounmap(pmu_base_addr); + pmu_base_addr = NULL; return -ENOMEM; } -- cgit v1.2.3 From d4aa4e4f77646293ad74d35f28fe4c48bea3ec9e Mon Sep 17 00:00:00 2001 From: Sandipan Das Date: Tue, 10 Jul 2018 19:28:13 +0530 Subject: perf powerpc: Fix callchain ip filtering [ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ] For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 : ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 ... 0000000000110450 : ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 : 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 : ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by: Sandipan Das Cc: Jiri Olsa Cc: Maynard Johnson Cc: Naveen N. Rao Cc: Ravi Bangoria Cc: Sukadev Bhattiprolu Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- tools/perf/arch/powerpc/util/skip-callchain-idx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c index 9d1f6e976a5a..9a53f6e9ef43 100644 --- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c +++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c @@ -250,7 +250,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain) if (!chain || chain->nr < 3) return skip_slot; - ip = chain->ips[2]; + ip = chain->ips[1]; thread__find_addr_location(thread, PERF_RECORD_MISC_USER, MAP__FUNCTION, ip, &al); -- cgit v1.2.3 From 8e8c3ba5add95a2f841b149162b928b138412f36 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 1 May 2018 00:55:44 +1000 Subject: powerpc/powernv: opal_put_chars partial write fix [ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/powernv/opal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index e48826aa314c..b40606051efe 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -371,7 +371,7 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) /* Closed or other error drop */ if (rc != OPAL_SUCCESS && rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT) { - written = total_len; + written += total_len; break; } if (rc == OPAL_SUCCESS) { -- cgit v1.2.3 From 2ca7b66d826dcf33fec1fff6567f07c460a42955 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sun, 8 Jul 2018 17:07:12 +0200 Subject: MIPS: jz4740: Bump zload address [ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ] Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000. This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly. To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000. This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header. Signed-off-by: Paul Cercueil Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/mips/jz4740/Platform | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform index 28448d358c10..a2a5a85ea1f9 100644 --- a/arch/mips/jz4740/Platform +++ b/arch/mips/jz4740/Platform @@ -1,4 +1,4 @@ platform-$(CONFIG_MACH_INGENIC) += jz4740/ cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000 -zload-$(CONFIG_MACH_INGENIC) += 0xffffffff80600000 +zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000 -- cgit v1.2.3 From 773320786c568693fe809c43cb46851d6f723419 Mon Sep 17 00:00:00 2001 From: Manikanta Pubbisetty Date: Tue, 10 Jul 2018 16:48:27 +0530 Subject: mac80211: restrict delayed tailroom needed decrement [ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by: Manikanta Pubbisetty Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- net/mac80211/cfg.c | 2 +- net/mac80211/key.c | 24 +++++++++++++++--------- 2 files changed, 16 insertions(+), 10 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 00a8cc572a22..1f930032253a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -286,7 +286,7 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, goto out_unlock; } - ieee80211_key_free(key, true); + ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION); ret = 0; out_unlock: diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 4a72c0d1e56f..91a4e606edcd 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -647,11 +647,15 @@ int ieee80211_key_link(struct ieee80211_key *key, { struct ieee80211_local *local = sdata->local; struct ieee80211_key *old_key; - int idx, ret; - bool pairwise; - - pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; - idx = key->conf.keyidx; + int idx = key->conf.keyidx; + bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE; + /* + * We want to delay tailroom updates only for station - in that + * case it helps roaming speed, but in other cases it hurts and + * can cause warnings to appear. + */ + bool delay_tailroom = sdata->vif.type == NL80211_IFTYPE_STATION; + int ret; mutex_lock(&sdata->local->key_mtx); @@ -679,14 +683,14 @@ int ieee80211_key_link(struct ieee80211_key *key, increment_tailroom_need_count(sdata); ieee80211_key_replace(sdata, sta, pairwise, old_key, key); - ieee80211_key_destroy(old_key, true); + ieee80211_key_destroy(old_key, delay_tailroom); ieee80211_debugfs_key_add(key); if (!local->wowlan) { ret = ieee80211_key_enable_hw_accel(key); if (ret) - ieee80211_key_free(key, true); + ieee80211_key_free(key, delay_tailroom); } else { ret = 0; } @@ -874,7 +878,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local, ieee80211_key_replace(key->sdata, key->sta, key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE, key, NULL); - __ieee80211_key_destroy(key, true); + __ieee80211_key_destroy(key, key->sdata->vif.type == + NL80211_IFTYPE_STATION); } for (i = 0; i < NUM_DEFAULT_KEYS; i++) { @@ -884,7 +889,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local, ieee80211_key_replace(key->sdata, key->sta, key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE, key, NULL); - __ieee80211_key_destroy(key, true); + __ieee80211_key_destroy(key, key->sdata->vif.type == + NL80211_IFTYPE_STATION); } mutex_unlock(&local->key_mtx); -- cgit v1.2.3 From 2e0c018c0c60ab5053cccfa2f3f5f6641d703754 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Fri, 20 Jul 2018 18:33:59 +0200 Subject: xen-netfront: fix queue name setting [ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ] Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and open") changed the initialization order: xennet_create_queues() now happens before we do register_netdev() so using netdev->name in xennet_init_queue() is incorrect, we end up with the following in /proc/interrupts: 60: 139 0 xen-dyn -event eth%d-q0-tx 61: 265 0 xen-dyn -event eth%d-q0-rx 62: 234 0 xen-dyn -event eth%d-q1-tx 63: 1 0 xen-dyn -event eth%d-q1-rx and this looks ugly. Actually, using early netdev name (even when it's already set) is also not ideal: nowadays we tend to rename eth devices and queue name may end up not corresponding to the netdev name. Use nodename from xenbus device for queue naming: this can't change in VM's lifetime. Now /proc/interrupts looks like 62: 202 0 xen-dyn -event device/vif/0-q0-tx 63: 317 0 xen-dyn -event device/vif/0-q0-rx 64: 262 0 xen-dyn -event device/vif/0-q1-tx 65: 17 0 xen-dyn -event device/vif/0-q1-rx Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open") Signed-off-by: Vitaly Kuznetsov Reviewed-by: Ross Lagerwall Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 68d0a5c9d437..2c0db518fe14 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1616,7 +1616,7 @@ static int xennet_init_queue(struct netfront_queue *queue) (unsigned long)queue); snprintf(queue->name, sizeof(queue->name), "%s-q%u", - queue->info->netdev->name, queue->id); + queue->info->xbdev->nodename, queue->id); /* Initialise tx_skbs as a free chain containing every entry. */ queue->tx_skb_freelist = 0; -- cgit v1.2.3 From 4f3381ab8af23acc958828795477c7f8929e8925 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Wed, 11 Jul 2018 14:18:23 +0200 Subject: arm64: dts: qcom: db410c: Fix Bluetooth LED trigger [ Upstream commit e53db018315b7660bb7000a29e79faff2496c2c2 ] Current LED trigger, 'bt', is not known/used by any existing driver. Fix this by renaming it to 'bluetooth-power' trigger which is controlled by the Bluetooth subsystem. Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes") Signed-off-by: Loic Poulain Signed-off-by: Andy Gross Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6b8abbe68746..3011c88bd2f3 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -105,7 +105,7 @@ led@6 { label = "apq8016-sbc:blue:bt"; gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "bt"; + linux,default-trigger = "bluetooth-power"; default-state = "off"; }; }; -- cgit v1.2.3 From 29162495129d39080d21069364f3eb9919509a9a Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Thu, 19 Jul 2018 12:43:48 +0200 Subject: s390/qeth: fix race in used-buffer accounting [ Upstream commit a702349a4099cd5a7bab0904689d8e0bf8dcd622 ] By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 95c631125a20..09ac56317f1b 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3505,13 +3505,14 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, qdio_flags = QDIO_FLAG_SYNC_OUTPUT; if (atomic_read(&queue->set_pci_flags_count)) qdio_flags |= QDIO_FLAG_PCI_OUT; + atomic_add(count, &queue->used_buffers); + rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, queue->queue_no, index, count); if (queue->card->options.performance_stats) queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() - queue->card->perf_stats.outbound_do_qdio_start_time; - atomic_add(count, &queue->used_buffers); if (rc) { queue->card->stats.tx_errors += count; /* ignore temporary SIGA errors without busy condition */ -- cgit v1.2.3 From a4b8132c86c9c5a94e151cd9832ef17aef625963 Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Thu, 19 Jul 2018 12:43:49 +0200 Subject: s390/qeth: reset layer2 attribute on layer switch [ Upstream commit 70551dc46ffa3555a0b5f3545b0cd87ab67fd002 ] After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field. If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/s390/net/qeth_core_sys.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index fa844b0ff847..7bcf0dae3a65 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -419,6 +419,7 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, if (card->discipline) { card->discipline->remove(card->gdev); qeth_core_free_discipline(card); + card->options.layer2 = -1; } rc = qeth_core_load_discipline(card, newdis); -- cgit v1.2.3 From da189ebd788cf139303868fe51257b3d25ffbf62 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Jul 2018 20:53:09 -0700 Subject: platform/x86: toshiba_acpi: Fix defined but not used build warnings [ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ] Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function] Signed-off-by: Randy Dunlap Cc: Azael Avalos Cc: platform-driver-x86@vger.kernel.org Cc: Andy Shevchenko Signed-off-by: Darren Hart (VMware) Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/platform/x86/toshiba_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index f774cb576ffa..1ff95b5a429d 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -34,6 +34,7 @@ #define TOSHIBA_ACPI_VERSION "0.23" #define PROC_INTERFACE_VERSION 1 +#include #include #include #include @@ -1472,7 +1473,7 @@ static const struct file_operations keys_proc_fops = { .write = keys_proc_write, }; -static int version_proc_show(struct seq_file *m, void *v) +static int __maybe_unused version_proc_show(struct seq_file *m, void *v) { seq_printf(m, "driver: %s\n", TOSHIBA_ACPI_VERSION); seq_printf(m, "proc_interface: %d\n", PROC_INTERFACE_VERSION); -- cgit v1.2.3 From 7150120104483994c464e55c985afa930f5e2a73 Mon Sep 17 00:00:00 2001 From: Michael Müller Date: Sun, 15 Jul 2018 00:27:06 +0200 Subject: crypto: sharah - Unregister correct algorithms for SAHARA 3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 0e7d4d932ffc23f75efb31a8c2ac2396c1b81c55 ] This patch fixes two typos related to unregistering algorithms supported by SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered in case of an error. In sahara_unregister_algs the wrong array is used to determine the iteration count. Signed-off-by: Michael Müller Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/crypto/sahara.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index f68c24a98277..dedfc96acc66 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -1363,7 +1363,7 @@ err_sha_v4_algs: err_sha_v3_algs: for (j = 0; j < k; j++) - crypto_unregister_ahash(&sha_v4_algs[j]); + crypto_unregister_ahash(&sha_v3_algs[j]); err_aes_algs: for (j = 0; j < i; j++) @@ -1379,7 +1379,7 @@ static void sahara_unregister_algs(struct sahara_dev *dev) for (i = 0; i < ARRAY_SIZE(aes_algs); i++) crypto_unregister_alg(&aes_algs[i]); - for (i = 0; i < ARRAY_SIZE(sha_v4_algs); i++) + for (i = 0; i < ARRAY_SIZE(sha_v3_algs); i++) crypto_unregister_ahash(&sha_v3_algs[i]); if (dev->version > SAHARA_VERSION_3) -- cgit v1.2.3 From 12c3ba18e3f11cb573589d14c2d82646b1981d29 Mon Sep 17 00:00:00 2001 From: Xiao Liang Date: Tue, 14 Aug 2018 23:21:28 +0800 Subject: xen-netfront: fix warn message as irq device name has '/' [ Upstream commit 21f2706b20100bb3db378461ab9b8e2035309b5b ] There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9( xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found under /proc/irq/xx/. This patch only picks up device type and id as its name. With the patch, now /proc/interrupts looks like below and the warning message gone: 70: 21 0 0 0 xen-dyn -event vif0-q0-tx 71: 15 0 0 0 xen-dyn -event vif0-q0-rx 72: 14 0 0 0 xen-dyn -event vif0-q1-tx 73: 33 0 0 0 xen-dyn -event vif0-q1-rx 74: 12 0 0 0 xen-dyn -event vif0-q2-tx 75: 24 0 0 0 xen-dyn -event vif0-q2-rx 76: 19 0 0 0 xen-dyn -event vif0-q3-tx 77: 21 0 0 0 xen-dyn -event vif0-q3-rx Below is call trace information without this patch: name 'device/vif/0-q0-tx' WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 RIP: 0010:__xlate_proc_name+0x85/0xa0 RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 Call Trace: __proc_create+0x45/0x230 ? snprintf+0x49/0x60 proc_mkdir_data+0x35/0x90 register_handler_proc+0xef/0x110 ? proc_register+0xfc/0x110 ? proc_create_data+0x70/0xb0 __setup_irq+0x39b/0x660 ? request_threaded_irq+0xad/0x160 request_threaded_irq+0xf5/0x160 ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] bind_evtchn_to_irqhandler+0x3d/0x70 ? xenbus_alloc_evtchn+0x41/0xa0 netback_changed+0xa46/0xcda [xen_netfront] ? find_watch+0x40/0x40 xenwatch_thread+0xc5/0x160 ? finish_wait+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f ---[ end trace 650e5561b0caab3a ]--- Signed-off-by: Xiao Liang Reviewed-by: Juergen Gross Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/xen-netfront.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 2c0db518fe14..c48665eae9ee 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1608,6 +1608,7 @@ static int xennet_init_queue(struct netfront_queue *queue) { unsigned short i; int err = 0; + char *devid; spin_lock_init(&queue->tx_lock); spin_lock_init(&queue->rx_lock); @@ -1615,8 +1616,9 @@ static int xennet_init_queue(struct netfront_queue *queue) setup_timer(&queue->rx_refill_timer, rx_refill_timeout, (unsigned long)queue); - snprintf(queue->name, sizeof(queue->name), "%s-q%u", - queue->info->xbdev->nodename, queue->id); + devid = strrchr(queue->info->xbdev->nodename, '/') + 1; + snprintf(queue->name, sizeof(queue->name), "vif%s-q%u", + devid, queue->id); /* Initialise tx_skbs as a free chain containing every entry. */ queue->tx_skb_freelist = 0; -- cgit v1.2.3 From 07c63fd028418528d9f58f8f8fab33ad20432ce2 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Thu, 30 Aug 2018 08:35:19 +0300 Subject: RDMA/cma: Protect cma dev list with lock commit 954a8e3aea87e896e320cf648c1a5bbe47de443e upstream. When AF_IB addresses are used during rdma_resolve_addr() a lock is not held. A cma device can get removed while list traversal is in progress which may lead to crash. ie CPU0 CPU1 ==== ==== rdma_resolve_addr() cma_resolve_ib_dev() list_for_each() cma_remove_one() cur_dev->device mutex_lock(&lock) list_del(); mutex_unlock(&lock); cma_process_remove(); Therefore, hold a lock while traversing the list which avoids such situation. Cc: # 3.10 Fixes: f17df3b0dede ("RDMA/cma: Add support for AF_IB to rdma_resolve_addr()") Signed-off-by: Parav Pandit Reviewed-by: Daniel Jurgens Signed-off-by: Leon Romanovsky Reviewed-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/core/cma.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 0f42411d6a79..1454290078de 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -544,6 +544,7 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv) dgid = (union ib_gid *) &addr->sib_addr; pkey = ntohs(addr->sib_pkey); + mutex_lock(&lock); list_for_each_entry(cur_dev, &dev_list, list) { for (p = 1; p <= cur_dev->device->phys_port_cnt; ++p) { if (!rdma_cap_af_ib(cur_dev->device, p)) @@ -567,18 +568,19 @@ static int cma_resolve_ib_dev(struct rdma_id_private *id_priv) cma_dev = cur_dev; sgid = gid; id_priv->id.port_num = p; + goto found; } } } } - - if (!cma_dev) - return -ENODEV; + mutex_unlock(&lock); + return -ENODEV; found: cma_attach_to_dev(id_priv, cma_dev); - addr = (struct sockaddr_ib *) cma_src_addr(id_priv); - memcpy(&addr->sib_addr, &sgid, sizeof sgid); + mutex_unlock(&lock); + addr = (struct sockaddr_ib *)cma_src_addr(id_priv); + memcpy(&addr->sib_addr, &sgid, sizeof(sgid)); cma_translate_ib(addr, &id_priv->id.route.addr.dev_addr); return 0; } -- cgit v1.2.3 From 1cd01dba1355e291f636555b1920625ed58c1623 Mon Sep 17 00:00:00 2001 From: Bin Yang Date: Wed, 12 Sep 2018 03:36:34 +0000 Subject: pstore: Fix incorrect persistent ram buffer mapping commit 831b624df1b420c8f9281ed1307a8db23afb72df upstream. persistent_ram_vmap() returns the page start vaddr. persistent_ram_iomap() supports non-page-aligned mapping. persistent_ram_buffer_map() always adds offset-in-page to the vaddr returned from these two functions, which causes incorrect mapping of non-page-aligned persistent ram buffer. By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which might not be page aligned. If the offset-in-page > 2048, the vaddr will be in next page. If the next page is not mapped, it will cause kernel panic: [ 0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000 ... [ 0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f ... [ 0.075000] Call Trace: [ 0.075000] ramoops_init_przs.part.10.constprop.15+0x105/0x260 [ 0.075000] ramoops_probe+0x232/0x3a0 [ 0.075000] platform_drv_probe+0x3e/0xa0 [ 0.075000] driver_probe_device+0x2cd/0x400 [ 0.075000] __driver_attach+0xe4/0x110 [ 0.075000] ? driver_probe_device+0x400/0x400 [ 0.075000] bus_for_each_dev+0x70/0xa0 [ 0.075000] driver_attach+0x1e/0x20 [ 0.075000] bus_add_driver+0x159/0x230 [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] driver_register+0x70/0xc0 [ 0.075000] ? init_pstore_fs+0x4d/0x4d [ 0.075000] __platform_driver_register+0x36/0x40 [ 0.075000] ramoops_init+0x12f/0x131 [ 0.075000] do_one_initcall+0x4d/0x12c [ 0.075000] ? do_early_param+0x95/0x95 [ 0.075000] kernel_init_freeable+0x19b/0x222 [ 0.075000] ? rest_init+0xbb/0xbb [ 0.075000] kernel_init+0xe/0xfc [ 0.075000] ret_from_fork+0x3a/0x50 Signed-off-by: Bin Yang [kees: add comments describing the mapping differences, updated commit log] Fixes: 24c3d2f342ed ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- fs/pstore/ram_core.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index 27300533c2dd..bd21795ce657 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -378,7 +378,12 @@ static void *persistent_ram_vmap(phys_addr_t start, size_t size, vaddr = vmap(pages, page_count, VM_MAP, prot); kfree(pages); - return vaddr; + /* + * Since vmap() uses page granularity, we must add the offset + * into the page here, to get the byte granularity address + * into the mapping to represent the actual "start" location. + */ + return vaddr + offset_in_page(start); } static void *persistent_ram_iomap(phys_addr_t start, size_t size, @@ -397,6 +402,11 @@ static void *persistent_ram_iomap(phys_addr_t start, size_t size, else va = ioremap_wc(start, size); + /* + * Since request_mem_region() and ioremap() are byte-granularity + * there is no need handle anything special like we do when the + * vmap() case in persistent_ram_vmap() above. + */ return va; } @@ -417,7 +427,7 @@ static int persistent_ram_buffer_map(phys_addr_t start, phys_addr_t size, return -ENOMEM; } - prz->buffer = prz->vaddr + offset_in_page(start); + prz->buffer = prz->vaddr; prz->buffer_size = size - sizeof(struct persistent_ram_buffer); return 0; @@ -464,7 +474,8 @@ void persistent_ram_free(struct persistent_ram_zone *prz) if (prz->vaddr) { if (pfn_valid(prz->paddr >> PAGE_SHIFT)) { - vunmap(prz->vaddr); + /* We must vunmap() at page-granularity. */ + vunmap(prz->vaddr - offset_in_page(prz->paddr)); } else { iounmap(prz->vaddr); release_mem_region(prz->paddr, prz->size); -- cgit v1.2.3 From a739cb3e04a2f87bf29119a61cb2f77483ae228b Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 7 Sep 2018 14:21:30 +0200 Subject: xen/netfront: fix waiting for xenbus state change commit 8edfe2e992b75aee3da9316e9697c531194c2f53 upstream. Commit 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") added a new wait queue to wait on for a state change when the module is loaded manually. Unfortunately there is no wakeup anywhere to stop that waiting. Instead of introducing a new wait queue rename the existing module_unload_q to module_wq and use it for both purposes (loading and unloading). As any state change of the backend might be intended to stop waiting do the wake_up_all() in any case when netback_changed() is called. Fixes: 822fb18a82aba ("xen-netfront: wait xenbus state change when load module manually") Cc: #4.18 Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/net/xen-netfront.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index c48665eae9ee..3270b4333668 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -86,8 +86,7 @@ struct netfront_cb { /* IRQ name is queue name with "-tx" or "-rx" appended */ #define IRQ_NAME_SIZE (QUEUE_NAME_SIZE + 3) -static DECLARE_WAIT_QUEUE_HEAD(module_load_q); -static DECLARE_WAIT_QUEUE_HEAD(module_unload_q); +static DECLARE_WAIT_QUEUE_HEAD(module_wq); struct netfront_stats { u64 packets; @@ -1336,11 +1335,11 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev) netif_carrier_off(netdev); xenbus_switch_state(dev, XenbusStateInitialising); - wait_event(module_load_q, - xenbus_read_driver_state(dev->otherend) != - XenbusStateClosed && - xenbus_read_driver_state(dev->otherend) != - XenbusStateUnknown); + wait_event(module_wq, + xenbus_read_driver_state(dev->otherend) != + XenbusStateClosed && + xenbus_read_driver_state(dev->otherend) != + XenbusStateUnknown); return netdev; exit: @@ -2025,15 +2024,14 @@ static void netback_changed(struct xenbus_device *dev, dev_dbg(&dev->dev, "%s\n", xenbus_strstate(backend_state)); + wake_up_all(&module_wq); + switch (backend_state) { case XenbusStateInitialising: case XenbusStateInitialised: case XenbusStateReconfiguring: case XenbusStateReconfigured: - break; - case XenbusStateUnknown: - wake_up_all(&module_unload_q); break; case XenbusStateInitWait: @@ -2049,12 +2047,10 @@ static void netback_changed(struct xenbus_device *dev, break; case XenbusStateClosed: - wake_up_all(&module_unload_q); if (dev->state == XenbusStateClosed) break; /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: - wake_up_all(&module_unload_q); xenbus_frontend_closed(dev); break; } @@ -2162,14 +2158,14 @@ static int xennet_remove(struct xenbus_device *dev) if (xenbus_read_driver_state(dev->otherend) != XenbusStateClosed) { xenbus_switch_state(dev, XenbusStateClosing); - wait_event(module_unload_q, + wait_event(module_wq, xenbus_read_driver_state(dev->otherend) == XenbusStateClosing || xenbus_read_driver_state(dev->otherend) == XenbusStateUnknown); xenbus_switch_state(dev, XenbusStateClosed); - wait_event(module_unload_q, + wait_event(module_wq, xenbus_read_driver_state(dev->otherend) == XenbusStateClosed || xenbus_read_driver_state(dev->otherend) == -- cgit v1.2.3 From ee4d1a30a4dd851aa31488ac77bfdd9ae6ae2556 Mon Sep 17 00:00:00 2001 From: Aaron Knister Date: Fri, 24 Aug 2018 08:42:46 -0400 Subject: IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler commit 816e846c2eb9129a3e0afa5f920c8bbc71efecaa upstream. Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by: Aaron Knister Tested-by: Ira Weiny Reviewed-by: Ira Weiny Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index f74b11542603..a338e60836ee 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -992,12 +992,14 @@ static int ipoib_cm_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_event *even skb_queue_head_init(&skqueue); + netif_tx_lock_bh(p->dev); spin_lock_irq(&priv->lock); set_bit(IPOIB_FLAG_OPER_UP, &p->flags); if (p->neigh) while ((skb = __skb_dequeue(&p->neigh->queue))) __skb_queue_tail(&skqueue, skb); spin_unlock_irq(&priv->lock); + netif_tx_unlock_bh(p->dev); while ((skb = __skb_dequeue(&skqueue))) { skb->dev = p->dev; -- cgit v1.2.3 From c527796fdb64c982d80b0b1f63bd53d7e0c594d5 Mon Sep 17 00:00:00 2001 From: "K. Y. Srinivasan" Date: Fri, 10 Aug 2018 23:06:07 +0000 Subject: Tools: hv: Fix a bug in the key delete code commit 86503bd35dec0ce363e9fdbf5299927422ed3899 upstream. Fix a bug in the key delete code - the num_records range from 0 to num_records-1. Signed-off-by: K. Y. Srinivasan Reported-by: David Binderman Cc: Reviewed-by: Michael Kelley Signed-off-by: Greg Kroah-Hartman --- tools/hv/hv_kvp_daemon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index 60a94b3e532e..177480066816 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -286,7 +286,7 @@ static int kvp_key_delete(int pool, const __u8 *key, int key_size) * Found a match; just move the remaining * entries up. */ - if (i == num_records) { + if (i == (num_records - 1)) { kvp_file_info[pool].num_records--; kvp_update_file(pool); return 0; -- cgit v1.2.3 From 68fe884e7b98351684849a78d2bb099a7b389b64 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 15 Aug 2018 10:50:41 -0500 Subject: misc: hmc6352: fix potential Spectre v1 commit de916736aaaadddbd6061472969f667b14204aa9 upstream. val is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue 'map' [r] Fix this by sanitizing val before using it to index map Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hmc6352.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c index 90520d76633f..9cde4c5bfba4 100644 --- a/drivers/misc/hmc6352.c +++ b/drivers/misc/hmc6352.c @@ -27,6 +27,7 @@ #include #include #include +#include static DEFINE_MUTEX(compass_mutex); @@ -50,6 +51,7 @@ static int compass_store(struct device *dev, const char *buf, size_t count, return ret; if (val >= strlen(map)) return -EINVAL; + val = array_index_nospec(val, strlen(map)); mutex_lock(&compass_mutex); ret = compass_command(c, map[val]); mutex_unlock(&compass_mutex); -- cgit v1.2.3 From c343fc8035cb31357bd7d575590bb51c4e16563c Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 4 Sep 2018 17:35:16 +0300 Subject: usb: Don't die twice if PCI xhci host is not responding in resume commit f3dc41c5d22b2ca14a0802a65d8cdc33a3882d4e upstream. usb_hc_died() should only be called once, and with the primary HCD as parameter. It will mark both primary and secondary hcd's dead. Remove the extra call to usb_cd_died with the shared hcd as parameter. Fixes: ff9d78b36f76 ("USB: Set usb_hcd->state and flags for shared roothubs") Signed-off-by: Mathias Nyman Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 40378487e023..a5e3e410db4e 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -529,8 +529,6 @@ static int resume_common(struct device *dev, int event) event == PM_EVENT_RESTORE); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); - if (hcd->shared_hcd) - usb_hc_died(hcd->shared_hcd); usb_hc_died(hcd); } } -- cgit v1.2.3 From 49c05a0000dd72be965287f00650a81d67770063 Mon Sep 17 00:00:00 2001 From: Tim Anderson Date: Thu, 9 Aug 2018 14:55:34 -0700 Subject: USB: Add quirk to support DJI CineSSD commit f45681f9becaa65111ed0a691ccf080a0cd5feb8 upstream. This device does not correctly handle the LPM operations. Also, the device cannot handle ATA pass-through commands and locks up when attempted while running in super speed. This patch adds the equivalent quirk logic as found in uas. Signed-off-by: Tim Anderson Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ drivers/usb/storage/scsiglue.c | 9 +++++++++ drivers/usb/storage/unusual_devs.h | 7 +++++++ 3 files changed, 19 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 99f67764765f..deab9935c1af 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -259,6 +259,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* DJI CineSSD */ + { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index dba51362d2e2..6c186b4df94a 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -341,6 +341,15 @@ static int queuecommand_lck(struct scsi_cmnd *srb, return 0; } + if ((us->fflags & US_FL_NO_ATA_1X) && + (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) { + memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB, + sizeof(usb_stor_sense_invalidCDB)); + srb->result = SAM_STAT_CHECK_CONDITION; + done(srb); + return 0; + } + /* enqueue the command and wake up the control thread */ srb->scsi_done = done; us->srb = srb; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1a34d2a89de6..898215cad351 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2213,6 +2213,13 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* Reported-by: Tim Anderson */ +UNUSUAL_DEV( 0x2ca3, 0x0031, 0x0000, 0x9999, + "DJI", + "CineSSD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* * Nick Bowler * SCSI stack spams (otherwise harmless) error messages. -- cgit v1.2.3 From 35bcdf481ce4811fd326ac64f547e372f49aca3d Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 3 Sep 2018 15:44:16 +0300 Subject: usb: Avoid use-after-free by flushing endpoints early in usb_set_interface() commit f9a5b4f58b280c1d26255376713c132f93837621 upstream. The steps taken by usb core to set a new interface is very different from what is done on the xHC host side. xHC hardware will do everything in one go. One command is used to set up new endpoints, free old endpoints, check bandwidth, and run the new endpoints. All this is done by xHC when usb core asks the hcd to check for available bandwidth. At this point usb core has not yet flushed the old endpoints, which will cause use-after-free issues in xhci driver as queued URBs are cancelled on a re-allocated endpoint. To resolve this add a call to usb_disable_interface() which will flush the endpoints before calling usb_hcd_alloc_bandwidth() Additional checks in xhci driver will also be implemented to gracefully handle stale URB cancel on freed and re-allocated endpoints Cc: Reported-by: Sudip Mukherjee Signed-off-by: Mathias Nyman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 29adabdb305f..08cba309eb78 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1282,6 +1282,11 @@ void usb_enable_interface(struct usb_device *dev, * is submitted that needs that bandwidth. Some other operating systems * allocate bandwidth early, when a configuration is chosen. * + * xHCI reserves bandwidth and configures the alternate setting in + * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting + * may be disabled. Drivers cannot rely on any particular alternate + * setting being in effect after a failure. + * * This call is synchronous, and may not be used in an interrupt context. * Also, drivers must not change altsettings while urbs are scheduled for * endpoints in that interface; all such urbs must first be completed @@ -1317,6 +1322,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) alternate); return -EINVAL; } + /* + * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth, + * including freeing dropped endpoint ring buffers. + * Make sure the interface endpoints are flushed before that + */ + usb_disable_interface(dev, iface, false); /* Make sure we have enough bandwidth for this alternate interface. * Remove the current alt setting and add the new alt setting. -- cgit v1.2.3 From 637acc7bdebc53500f13d7da1b37825e21b2e588 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sat, 1 Sep 2018 17:23:47 +0800 Subject: usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame() commit 6d4f268fa132742fe96dad22307c68d237356d88 upstream. i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function for the USB driver. So it should not sleep, but it is can sleep according to the function call paths (from bottom to top) in Linux-4.16. [FUNC] msleep drivers/usb/host/u132-hcd.c, 2558: msleep in u132_get_frame drivers/usb/core/hcd.c, 2231: [FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number drivers/usb/core/usb.c, 822: usb_hcd_get_frame_number in usb_get_current_frame_number sound/usb/usx2y/usbusx2yaudio.c, 303: usb_get_current_frame_number in i_usX2Y_urb_complete sound/usb/usx2y/usbusx2yaudio.c, 366: i_usX2Y_urb_complete in i_usX2Y_subs_startup Note that [FUNC_PTR] means a function pointer call is used. To fix this bug, msleep() is replaced with mdelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/u132-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 692ccc69345e..d5434e7a3b2e 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2565,7 +2565,7 @@ static int u132_get_frame(struct usb_hcd *hcd) } else { int frame = 0; dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n"); - msleep(100); + mdelay(100); return frame; } } -- cgit v1.2.3 From 34f1df0ff035c4e14decea8d439b785f4f913bc4 Mon Sep 17 00:00:00 2001 From: Maxence Duprès Date: Wed, 8 Aug 2018 23:56:33 +0000 Subject: USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller commit 9b83a1c301ad6d24988a128c69b42cbaaf537d82 upstream. WORLDE Controller KS49 or Prodipe MIDI 49C USB controller cause a -EPROTO error, a communication restart and loop again. This issue has already been fixed for KS25. https://lore.kernel.org/patchwork/patch/753077/ I just add device 201 for KS49 in quirks.c to get it works. Signed-off-by: Laurent Roux Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index deab9935c1af..37a5e07b3488 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */ + { USB_DEVICE(0x0218, 0x0201), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* WORLDE easy key (easykey.25) MIDI controller */ { USB_DEVICE(0x0218, 0x0401), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, -- cgit v1.2.3 From f409f34070299081b243aab0405b151cce28f6db Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 8 Aug 2018 11:20:39 -0400 Subject: USB: net2280: Fix erroneous synchronization change commit dec3c23c9aa1815f07d98ae0375b4cbc10971e13 upstream. Commit f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") was based on a serious misunderstanding. It introduced regressions into both the dummy-hcd and net2280 drivers. The problem in dummy-hcd was fixed by commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), but the problem in net2280 remains. Namely: the ->disconnect(), ->suspend(), ->resume(), and ->reset() callbacks must be invoked without the private lock held; otherwise a deadlock will occur when the callback routine tries to interact with the UDC driver. This patch largely is a reversion of the relevant parts of f16443a034c7. It also drops the private lock around the calls to ->suspend() and ->resume() (something the earlier patch forgot to do). This is safe from races with device interrupts because it occurs within the interrupt handler. Finally, the patch changes where the ->disconnect() callback is invoked when net2280_pullup() turns the pullup off. Rather than making the callback from within stop_activity() at a time when dropping the private lock could be unsafe, the callback is moved to a point after the lock has already been dropped. Signed-off-by: Alan Stern Fixes: f16443a034c7 ("USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks") Reported-by: D. Ziesche Tested-by: D. Ziesche CC: Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/net2280.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index a47de8c31ce9..8efeadf30b4d 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -1542,11 +1542,14 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) writel(tmp | BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); } else { writel(tmp & ~BIT(USB_DETECT_ENABLE), &dev->usb->usbctl); - stop_activity(dev, dev->driver); + stop_activity(dev, NULL); } spin_unlock_irqrestore(&dev->lock, flags); + if (!is_on && dev->driver) + dev->driver->disconnect(&dev->gadget); + return 0; } @@ -2425,8 +2428,11 @@ static void stop_activity(struct net2280 *dev, struct usb_gadget_driver *driver) nuke(&dev->ep[i]); /* report disconnect; the driver is already quiesced */ - if (driver) + if (driver) { + spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); + spin_lock(&dev->lock); + } usb_reinit(dev); } @@ -3272,6 +3278,8 @@ next_endpoints: BIT(PCI_RETRY_ABORT_INTERRUPT)) static void handle_stat1_irqs(struct net2280 *dev, u32 stat) +__releases(dev->lock) +__acquires(dev->lock) { struct net2280_ep *ep; u32 tmp, num, mask, scratch; @@ -3312,12 +3320,14 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) if (disconnect || reset) { stop_activity(dev, dev->driver); ep0_start(dev); + spin_unlock(&dev->lock); if (reset) usb_gadget_udc_reset (&dev->gadget, dev->driver); else (dev->driver->disconnect) (&dev->gadget); + spin_lock(&dev->lock); return; } } @@ -3336,6 +3346,7 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) tmp = BIT(SUSPEND_REQUEST_CHANGE_INTERRUPT); if (stat & tmp) { writel(tmp, &dev->regs->irqstat1); + spin_unlock(&dev->lock); if (stat & BIT(SUSPEND_REQUEST_INTERRUPT)) { if (dev->driver->suspend) dev->driver->suspend(&dev->gadget); @@ -3346,6 +3357,7 @@ static void handle_stat1_irqs(struct net2280 *dev, u32 stat) dev->driver->resume(&dev->gadget); /* at high speed, note erratum 0133 */ } + spin_lock(&dev->lock); stat &= ~tmp; } -- cgit v1.2.3 From 403c5c2377ca18f99dbd38006b31705fd0e93ddf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 21 Aug 2018 11:59:52 +0200 Subject: USB: serial: io_ti: fix array underflow in completion handler commit 691a03cfe8ca483f9c48153b869d354e4ae3abef upstream. As reported by Dan Carpenter, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reported-by: Dan Carpenter Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h index 1bd67b24f916..bc9ff5ebd67c 100644 --- a/drivers/usb/serial/io_ti.h +++ b/drivers/usb/serial/io_ti.h @@ -178,7 +178,7 @@ struct ump_interrupt { } __attribute__((packed)); -#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01) #define TIUMP_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) #define TIUMP_INTERRUPT_CODE_LSR 0x03 #define TIUMP_INTERRUPT_CODE_MSR 0x04 -- cgit v1.2.3 From b214cde70484a04e816fae671af146d346cddc88 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sat, 1 Sep 2018 16:25:08 +0800 Subject: usb: misc: uss720: Fix two sleep-in-atomic-context bugs commit bc8acc214d3f1cafebcbcd101a695bbac716595d upstream. async_complete() in uss720.c is a completion handler function for the USB driver. So it should not sleep, but it is can sleep according to the function call paths (from bottom to top) in Linux-4.16. [FUNC] set_1284_register(GFP_KERNEL) drivers/usb/misc/uss720.c, 372: set_1284_register in parport_uss720_frob_control drivers/parport/ieee1284.c, 560: [FUNC_PTR]parport_uss720_frob_control in parport_ieee1284_ack_data_avail drivers/parport/ieee1284.c, 577: parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt ./include/linux/parport.h, 474: parport_ieee1284_interrupt in parport_generic_irq drivers/usb/misc/uss720.c, 116: parport_generic_irq in async_complete [FUNC] get_1284_register(GFP_KERNEL) drivers/usb/misc/uss720.c, 382: get_1284_register in parport_uss720_read_status drivers/parport/ieee1284.c, 555: [FUNC_PTR]parport_uss720_read_status in parport_ieee1284_ack_data_avail drivers/parport/ieee1284.c, 577: parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt ./include/linux/parport.h, 474: parport_ieee1284_interrupt in parport_generic_irq drivers/usb/misc/uss720.c, 116: parport_generic_irq in async_complete Note that [FUNC_PTR] means a function pointer call is used. To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC. These bugs are found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/uss720.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 442b6631162e..3d750671b85a 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -388,7 +388,7 @@ static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned ch mask &= 0x0f; val &= 0x0f; d = (priv->reg[1] & (~mask)) ^ val; - if (set_1284_register(pp, 2, d, GFP_KERNEL)) + if (set_1284_register(pp, 2, d, GFP_ATOMIC)) return 0; priv->reg[1] = d; return d & 0xf; @@ -398,7 +398,7 @@ static unsigned char parport_uss720_read_status(struct parport *pp) { unsigned char ret; - if (get_1284_register(pp, 1, &ret, GFP_KERNEL)) + if (get_1284_register(pp, 1, &ret, GFP_ATOMIC)) return 0; return ret & 0xf8; } -- cgit v1.2.3 From 4be36bccc6c59b7482398a9db4c4df84f0a944af Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 15 Aug 2018 21:44:25 +0100 Subject: USB: yurex: Fix buffer over-read in yurex_write() commit 7e10f14ebface44a48275c8d6dc1caae3668d5a9 upstream. If the written data starts with a digit, yurex_write() tries to parse it as an integer using simple_strtoull(). This requires a null- terminator, and currently there's no guarantee that there is one. (The sample program at https://github.com/NeoCat/YUREX-driver-for-Linux/blob/master/sample/yurex_clock.pl writes an integer without a null terminator. It seems like it must have worked by chance!) Always add a null byte after the written data. Enlarge the buffer to allow for this. Cc: stable@vger.kernel.org Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 512c84adcace..e8e8702d5adf 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -439,13 +439,13 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, { struct usb_yurex *dev; int i, set = 0, retval = 0; - char buffer[16]; + char buffer[16 + 1]; char *data = buffer; unsigned long long c, c2 = 0; signed long timeout = 0; DEFINE_WAIT(wait); - count = min(sizeof(buffer), count); + count = min(sizeof(buffer) - 1, count); dev = file->private_data; /* verify that we actually have some data to write */ @@ -464,6 +464,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, retval = -EFAULT; goto error; } + buffer[count] = 0; memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE); switch (buffer[0]) { -- cgit v1.2.3 From b8b53adeca0e3ce18663338deb632b41c43a5176 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Sat, 1 Sep 2018 16:12:10 +0800 Subject: usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt() commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream. wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 61ea87917433..4380e4f600ab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -453,7 +453,7 @@ static int clear_wdm_read_flag(struct wdm_device *desc) set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); - rv = usb_submit_urb(desc->response, GFP_KERNEL); + rv = usb_submit_urb(desc->response, GFP_ATOMIC); spin_lock_irq(&desc->iuspin); if (rv) { dev_err(&desc->intf->dev, -- cgit v1.2.3 From 2d3631960dd329d2dfb547645851feb774de781e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 6 Sep 2018 12:47:51 +0300 Subject: cifs: prevent integer overflow in nxt_dir_entry() commit 8ad8aa353524d89fa2e09522f3078166ff78ec42 upstream. The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap around so I have added a check for integer overflow. Reported-by: Dr Silvio Cesare of InfoSect Reviewed-by: Ronnie Sahlberg Reviewed-by: Aurelien Aptel Signed-off-by: Dan Carpenter Signed-off-by: Steve French CC: Stable Signed-off-by: Greg Kroah-Hartman --- fs/cifs/readdir.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 97d1a15873c5..57b039ebfb1f 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -373,8 +373,15 @@ static char *nxt_dir_entry(char *old_entry, char *end_of_smb, int level) new_entry = old_entry + sizeof(FIND_FILE_STANDARD_INFO) + pfData->FileNameLength; - } else - new_entry = old_entry + le32_to_cpu(pDirInfo->NextEntryOffset); + } else { + u32 next_offset = le32_to_cpu(pDirInfo->NextEntryOffset); + + if (old_entry + next_offset < old_entry) { + cifs_dbg(VFS, "invalid offset %u\n", next_offset); + return NULL; + } + new_entry = old_entry + next_offset; + } cifs_dbg(FYI, "new entry %p old entry %p\n", new_entry, old_entry); /* validate that new_entry is not past end of SMB */ if (new_entry >= end_of_smb) { -- cgit v1.2.3 From 74fb46864fcbb9b42eb03b10adeeece6f6dc6970 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 6 Sep 2018 12:48:22 +0300 Subject: CIFS: fix wrapping bugs in num_entries() commit 56446f218af1133c802dad8e9e116f07f381846c upstream. The problem is that "entryptr + next_offset" and "entryptr + len + size" can wrap. I ended up changing the type of "entryptr" because it makes the math easier when we don't have to do so much casting. Signed-off-by: Dan Carpenter Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Reviewed-by: Pavel Shilovsky CC: Stable Signed-off-by: Greg Kroah-Hartman --- fs/cifs/smb2pdu.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 52d79fb04115..f7111bb88ec1 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2402,33 +2402,38 @@ num_entries(char *bufstart, char *end_of_buf, char **lastentry, size_t size) int len; unsigned int entrycount = 0; unsigned int next_offset = 0; - FILE_DIRECTORY_INFO *entryptr; + char *entryptr; + FILE_DIRECTORY_INFO *dir_info; if (bufstart == NULL) return 0; - entryptr = (FILE_DIRECTORY_INFO *)bufstart; + entryptr = bufstart; while (1) { - entryptr = (FILE_DIRECTORY_INFO *) - ((char *)entryptr + next_offset); - - if ((char *)entryptr + size > end_of_buf) { + if (entryptr + next_offset < entryptr || + entryptr + next_offset > end_of_buf || + entryptr + next_offset + size > end_of_buf) { cifs_dbg(VFS, "malformed search entry would overflow\n"); break; } - len = le32_to_cpu(entryptr->FileNameLength); - if ((char *)entryptr + len + size > end_of_buf) { + entryptr = entryptr + next_offset; + dir_info = (FILE_DIRECTORY_INFO *)entryptr; + + len = le32_to_cpu(dir_info->FileNameLength); + if (entryptr + len < entryptr || + entryptr + len > end_of_buf || + entryptr + len + size > end_of_buf) { cifs_dbg(VFS, "directory entry name would overflow frame end of buf %p\n", end_of_buf); break; } - *lastentry = (char *)entryptr; + *lastentry = entryptr; entrycount++; - next_offset = le32_to_cpu(entryptr->NextEntryOffset); + next_offset = le32_to_cpu(dir_info->NextEntryOffset); if (!next_offset) break; } -- cgit v1.2.3 From 0b726a48b9854576b518d0a1c58575078fdf3811 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 15 May 2018 23:32:45 +0100 Subject: binfmt_elf: Respect error return from `regset->active' [ Upstream commit 2f819db565e82e5f73cd42b39925098986693378 ] The regset API documented in defines -ENODEV as the result of the `->active' handler to be used where the feature requested is not available on the hardware found. However code handling core file note generation in `fill_thread_core_info' interpretes any non-zero result from the `->active' handler as the regset requested being active. Consequently processing continues (and hopefully gracefully fails later on) rather than being abandoned right away for the regset requested. Fix the problem then by making the code proceed only if a positive result is returned from the `->active' handler. Signed-off-by: Maciej W. Rozycki Signed-off-by: Paul Burton Fixes: 4206d3aa1978 ("elf core dump: notes user_regset") Patchwork: https://patchwork.linux-mips.org/patch/19332/ Cc: Alexander Viro Cc: James Hogan Cc: Ralf Baechle Cc: linux-fsdevel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index f44e93d2650d..62bc72001fce 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1707,7 +1707,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t, const struct user_regset *regset = &view->regsets[i]; do_thread_regset_writeback(t->task, regset); if (regset->core_note_type && regset->get && - (!regset->active || regset->active(t->task, regset))) { + (!regset->active || regset->active(t->task, regset) > 0)) { int ret; size_t size = regset->n * regset->size; void *data = kmalloc(size, GFP_KERNEL); -- cgit v1.2.3 From 20d6cff3fc059ac32d92fc737a8b9e80bb01ee4e Mon Sep 17 00:00:00 2001 From: Ronny Chevalier Date: Wed, 11 Jul 2018 14:39:37 +0200 Subject: audit: fix use-after-free in audit_add_watch [ Upstream commit baa2a4fdd525c8c4b0f704d20457195b29437839 ] audit_add_watch stores locally krule->watch without taking a reference on watch. Then, it calls audit_add_to_parent, and uses the watch stored locally. Unfortunately, it is possible that audit_add_to_parent updates krule->watch. When it happens, it also drops a reference of watch which could free the watch. How to reproduce (with KASAN enabled): auditctl -w /etc/passwd -F success=0 -k test_passwd auditctl -w /etc/passwd -F success=1 -k test_passwd2 The second call to auditctl triggers the use-after-free, because audit_to_parent updates krule->watch to use a previous existing watch and drops the reference to the newly created watch. To fix the issue, we grab a reference of watch and we release it at the end of the function. Signed-off-by: Ronny Chevalier Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- kernel/audit_watch.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c index a162661c9d60..f45a9a5d3e47 100644 --- a/kernel/audit_watch.c +++ b/kernel/audit_watch.c @@ -419,6 +419,13 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list) struct path parent_path; int h, ret = 0; + /* + * When we will be calling audit_add_to_parent, krule->watch might have + * been updated and watch might have been freed. + * So we need to keep a reference of watch. + */ + audit_get_watch(watch); + mutex_unlock(&audit_filter_mutex); /* Avoid calling path_lookup under audit_filter_mutex. */ @@ -427,8 +434,10 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list) /* caller expects mutex locked */ mutex_lock(&audit_filter_mutex); - if (ret) + if (ret) { + audit_put_watch(watch); return ret; + } /* either find an old parent or attach a new one */ parent = audit_find_parent(d_backing_inode(parent_path.dentry)); @@ -446,6 +455,7 @@ int audit_add_watch(struct audit_krule *krule, struct list_head **list) *list = &audit_inode_hash[h]; error: path_put(&parent_path); + audit_put_watch(watch); return ret; } -- cgit v1.2.3 From 1533250294cf5fe0b5ea3be4b58732b6d758fc69 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sat, 7 Jul 2018 05:37:22 +0200 Subject: mtdchar: fix overflows in adjustment of `count` [ Upstream commit 6c6bc9ea84d0008024606bf5ba10519e20d851bf ] The first checks in mtdchar_read() and mtdchar_write() attempt to limit `count` such that `*ppos + count <= mtd->size`. However, they ignore the possibility of `*ppos > mtd->size`, allowing the calculation of `count` to wrap around. `mtdchar_lseek()` prevents seeking beyond mtd->size, but the pread/pwrite syscalls bypass this. I haven't found any codepath on which this actually causes dangerous behavior, but it seems like a sensible change anyway. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Signed-off-by: Boris Brezillon Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/mtdchar.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 6d19835b80a9..0d244dac1ccb 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -160,8 +160,12 @@ static ssize_t mtdchar_read(struct file *file, char __user *buf, size_t count, pr_debug("MTD_read\n"); - if (*ppos + count > mtd->size) - count = mtd->size - *ppos; + if (*ppos + count > mtd->size) { + if (*ppos < mtd->size) + count = mtd->size - *ppos; + else + count = 0; + } if (!count) return 0; @@ -246,7 +250,7 @@ static ssize_t mtdchar_write(struct file *file, const char __user *buf, size_t c pr_debug("MTD_write\n"); - if (*ppos == mtd->size) + if (*ppos >= mtd->size) return -ENOSPC; if (*ppos + count > mtd->size) -- cgit v1.2.3 From f13ad779213b8345f55ea5e896df259c063d7898 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 16 Jul 2018 08:26:36 -0700 Subject: MIPS: loongson64: cs5536: Fix PCI_OHCI_INT_REG reads [ Upstream commit cd87668d601f622e0ebcfea4f78d116d5f572f4d ] The PCI_OHCI_INT_REG case in pci_ohci_read_reg() contains the following if statement: if ((lo & 0x00000f00) == CS5536_USB_INTR) CS5536_USB_INTR expands to the constant 11, which gives us the following condition which can never evaluate true: if ((lo & 0xf00) == 11) At least when using GCC 8.1.0 this falls foul of the tautoligcal-compare warning, and since the code is built with the -Werror flag the build fails. Fix this by shifting lo right by 8 bits in order to match the corresponding PCI_OHCI_INT_REG case in pci_ohci_write_reg(). Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19861/ Cc: Huacai Chen Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/mips/loongson64/common/cs5536/cs5536_ohci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c index f7c905e50dc4..92dc6bafc127 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c +++ b/arch/mips/loongson64/common/cs5536/cs5536_ohci.c @@ -138,7 +138,7 @@ u32 pci_ohci_read_reg(int reg) break; case PCI_OHCI_INT_REG: _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); - if ((lo & 0x00000f00) == CS5536_USB_INTR) + if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR) conf_data = 1; break; default: -- cgit v1.2.3 From 96d4584f786f1809ba6cd092fb4bfdff15e81d9b Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Thu, 12 Jul 2018 11:28:24 +0200 Subject: ARM: hisi: handle of_iomap and fix missing of_node_put [ Upstream commit d396cb185c0337aae5664b250cdd9a73f6eb1503 ] Relying on an unchecked of_iomap() which can return NULL is problematic here, an explicit check seems mandatory. Also the call to of_find_compatible_node() returns a device node with refcount incremented therefor an explicit of_node_put() is needed here. Signed-off-by: Nicholas Mc Guire Fixes: commit 22bae4290457 ("ARM: hi3xxx: add hotplug support") Signed-off-by: Wei Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-hisi/hotplug.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index a129aae72602..3f28c9141b48 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -148,13 +148,20 @@ static int hi3xxx_hotplug_init(void) struct device_node *node; node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); - if (node) { - ctrl_base = of_iomap(node, 0); - id = HI3620_CTRL; - return 0; + if (!node) { + id = ERROR_CTRL; + return -ENOENT; } - id = ERROR_CTRL; - return -ENOENT; + + ctrl_base = of_iomap(node, 0); + of_node_put(node); + if (!ctrl_base) { + id = ERROR_CTRL; + return -ENOMEM; + } + + id = HI3620_CTRL; + return 0; } void hi3xxx_set_cpu(int cpu, bool enable) -- cgit v1.2.3 From eafee0717962080c0ff2f26cecb17525d8d7091e Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Thu, 12 Jul 2018 11:28:22 +0200 Subject: ARM: hisi: fix error handling and missing of_node_put [ Upstream commit 9f30b5ae0585ca5234fe979294b8f897299dec99 ] of_iomap() can return NULL which seems critical here and thus should be explicitly flagged so that the cause of system halting can be understood. As of_find_compatible_node() is returning a device node with refcount incremented it must be explicitly decremented here. Signed-off-by: Nicholas Mc Guire Fixes: commit 7fda91e73155 ("ARM: hisi: enable smp for HiP01") Signed-off-by: Wei Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-hisi/hotplug.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 3f28c9141b48..32870560b280 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -226,10 +226,10 @@ void hip01_set_cpu(int cpu, bool enable) if (!ctrl_base) { np = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); - if (np) - ctrl_base = of_iomap(np, 0); - else - BUG(); + BUG_ON(!np); + ctrl_base = of_iomap(np, 0); + of_node_put(np); + BUG_ON(!ctrl_base); } if (enable) { -- cgit v1.2.3 From f615d18bab766af99814ae5ab90e33f481cde4a9 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Thu, 12 Jul 2018 11:28:23 +0200 Subject: ARM: hisi: check of_iomap and fix missing of_node_put [ Upstream commit 81646a3d39ef14749301374a3a0b8311384cd412 ] of_find_compatible_node() returns a device node with refcount incremented and thus needs an explicit of_node_put(). Further relying on an unchecked of_iomap() which can return NULL is problematic here, after all ctrl_base is critical enough for hix5hd2_set_cpu() to call BUG() if not available so a check seems mandated here. Signed-off-by: Nicholas Mc Guire 0002 Fixes: commit 06cc5c1d4d73 ("ARM: hisi: enable hix5hd2 SoC") Signed-off-by: Wei Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-hisi/hotplug.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 32870560b280..909bb2493781 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -180,11 +180,15 @@ static bool hix5hd2_hotplug_init(void) struct device_node *np; np = of_find_compatible_node(NULL, NULL, "hisilicon,cpuctrl"); - if (np) { - ctrl_base = of_iomap(np, 0); - return true; - } - return false; + if (!np) + return false; + + ctrl_base = of_iomap(np, 0); + of_node_put(np); + if (!ctrl_base) + return false; + + return true; } void hix5hd2_set_cpu(int cpu, bool enable) -- cgit v1.2.3 From eddbab9022ecbef7e00679f362449a49ddf3d323 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 30 May 2018 16:06:25 +0200 Subject: drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping [ Upstream commit b59fb482b52269977ee5de205308e5b236a03917 ] Depending on the kernel configuration, early ARM architecture setup code may have attached the GPU to a DMA/IOMMU mapping that transparently uses the IOMMU to back the DMA API. Tegra requires special handling for IOMMU backed buffers (a special bit in the GPU's MMU page tables indicates the memory path to take: via the SMMU or directly to the memory controller). Transparently backing DMA memory with an IOMMU prevents Nouveau from properly handling such memory accesses and causes memory access faults. As a side-note: buffers other than those allocated in instance memory don't need to be physically contiguous from the GPU's perspective since the GPU can map them into contiguous buffers using its own MMU. Mapping these buffers through the IOMMU is unnecessary and will even lead to performance degradation because of the additional translation. One exception to this are compressible buffers which need large pages. In order to enable these large pages, multiple small pages will have to be combined into one large (I/O virtually contiguous) mapping via the IOMMU. However, that is a topic outside the scope of this fix and isn't currently supported. An implementation will want to explicitly create these large pages in the Nouveau driver, so detaching from a DMA/IOMMU mapping would still be required. Signed-off-by: Thierry Reding Acked-by: Christoph Hellwig Reviewed-by: Robin Murphy Tested-by: Nicolas Chauvet Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c index e7e581d6a8ff..1bfc4807ce5b 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c @@ -23,6 +23,10 @@ #ifdef CONFIG_NOUVEAU_PLATFORM_DRIVER #include "priv.h" +#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU) +#include +#endif + static int nvkm_device_tegra_power_up(struct nvkm_device_tegra *tdev) { @@ -85,6 +89,15 @@ nvkm_device_tegra_probe_iommu(struct nvkm_device_tegra *tdev) unsigned long pgsize_bitmap; int ret; +#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU) + if (dev->archdata.mapping) { + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + + arm_iommu_detach_device(dev); + arm_iommu_release_mapping(mapping); + } +#endif + if (!tdev->func->iommu_bit) return; -- cgit v1.2.3 From 05925d75714070f511dfd247f4b0f387f856b253 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jul 2018 22:29:55 +0100 Subject: parport: sunbpp: fix error return code [ Upstream commit faa1a47388b33623e4d504c23569188907b039a0 ] Return an error code on failure. Change leading spaces to tab on the first if. Problem found using Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_sunbpp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c index 01cf1c1a841a..8de329546b82 100644 --- a/drivers/parport/parport_sunbpp.c +++ b/drivers/parport/parport_sunbpp.c @@ -286,12 +286,16 @@ static int bpp_probe(struct platform_device *op) ops = kmemdup(&parport_sunbpp_ops, sizeof(struct parport_operations), GFP_KERNEL); - if (!ops) + if (!ops) { + err = -ENOMEM; goto out_unmap; + } dprintk(("register_port\n")); - if (!(p = parport_register_port((unsigned long)base, irq, dma, ops))) + if (!(p = parport_register_port((unsigned long)base, irq, dma, ops))) { + err = -ENOMEM; goto out_free_ops; + } p->size = size; p->dev = &op->dev; -- cgit v1.2.3 From bfb2cbf2aaeafa2f24c31965cfbb079c79767c92 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Wed, 11 Jul 2018 13:40:28 -0600 Subject: coresight: Handle errors in finding input/output ports [ Upstream commit fe470f5f7f684ed15bc49b6183a64237547910ff ] If we fail to find the input / output port for a LINK component while enabling a path, we should fail gracefully rather than assuming port "0". Cc: Mathieu Poirier Signed-off-by: Suzuki K Poulose Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index 93738dfbf631..902ee6efd09c 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -86,7 +86,7 @@ static int coresight_find_link_inport(struct coresight_device *csdev) dev_err(&csdev->dev, "couldn't find inport, parent: %s, child: %s\n", dev_name(&parent->dev), dev_name(&csdev->dev)); - return 0; + return -ENODEV; } static int coresight_find_link_outport(struct coresight_device *csdev) @@ -107,7 +107,7 @@ static int coresight_find_link_outport(struct coresight_device *csdev) dev_err(&csdev->dev, "couldn't find outport, parent: %s, child: %s\n", dev_name(&csdev->dev), dev_name(&child->dev)); - return 0; + return -ENODEV; } static int coresight_enable_sink(struct coresight_device *csdev) @@ -155,6 +155,9 @@ static int coresight_enable_link(struct coresight_device *csdev) else refport = 0; + if (refport < 0) + return refport; + if (atomic_inc_return(&csdev->refcnt[refport]) == 1) { if (link_ops(csdev)->enable) { ret = link_ops(csdev)->enable(csdev, inport, outport); -- cgit v1.2.3 From 2e1c096da6402915919917a2a6dffef1ec1e0fba Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 11 Jul 2018 13:40:35 -0600 Subject: coresight: tpiu: Fix disabling timeouts [ Upstream commit ccff2dfaceaca4517432f5c149594215fe9098cc ] Probing the TPIU driver under UBSan triggers an out-of-bounds shift warning in coresight_timeout(): ... [ 5.677530] UBSAN: Undefined behaviour in drivers/hwtracing/coresight/coresight.c:929:16 [ 5.685542] shift exponent 64 is too large for 64-bit type 'long unsigned int' ... On closer inspection things are exponentially out of whack because we're passing a bitmask where a bit number should be. Amusingly, it seems that both calls will find their expected values by sheer luck and appear to succeed: 1 << FFCR_FON_MAN ends up at bit 64 which whilst undefined evaluates as zero in practice, while 1 << FFSR_FT_STOPPED finds bit 2 (TCPresent) which apparently is usually tied high. Following the examples of other drivers, define separate FOO and FOO_BIT macros for masks vs. indices, and put things right. CC: Robert Walker CC: Mike Leach CC: Mathieu Poirier Fixes: 11595db8e17f ("coresight: Fix disabling of CoreSight TPIU") Signed-off-by: Robin Murphy Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-tpiu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index 22e10b7d505d..fe3a2b19a5db 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -46,8 +46,9 @@ /** register definition **/ /* FFSR - 0x300 */ -#define FFSR_FT_STOPPED BIT(1) +#define FFSR_FT_STOPPED_BIT 1 /* FFCR - 0x304 */ +#define FFCR_FON_MAN_BIT 6 #define FFCR_FON_MAN BIT(6) #define FFCR_STOP_FI BIT(12) @@ -93,9 +94,9 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata) /* Generate manual flush */ writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR); /* Wait for flush to complete */ - coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0); + coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN_BIT, 0); /* Wait for formatter to stop */ - coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1); + coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED_BIT, 1); CS_LOCK(drvdata->base); } -- cgit v1.2.3 From 785cb2b02ff7c3000caa4eec977279f0fdba54c9 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 9 Jul 2018 21:47:27 +0300 Subject: gpiolib: Mark gpio_suffixes array with __maybe_unused MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit b23ec59926faf05b0c43680d05671c484e810ac4 ] Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Mark gpio_suffixes array with __maybe_unused to hide a compiler warning: In file included from drivers/gpio/gpiolib-legacy.c:6:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ In file included from drivers/gpio/gpiolib-devprop.c:17:0: drivers/gpio/gpiolib.h:95:27: warning: ‘gpio_suffixes’ defined but not used [-Wunused-const-variable=] static const char * const gpio_suffixes[] = { "gpios", "gpio" }; ^~~~~~~~~~~~~ Signed-off-by: Andy Shevchenko Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpio/gpiolib.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h index 98ab08c0aa2d..07541c5670e6 100644 --- a/drivers/gpio/gpiolib.h +++ b/drivers/gpio/gpiolib.h @@ -30,7 +30,7 @@ struct acpi_gpio_info { }; /* gpio suffixes used for ACPI and device tree lookup */ -static const char * const gpio_suffixes[] = { "gpios", "gpio" }; +static __maybe_unused const char * const gpio_suffixes[] = { "gpios", "gpio" }; #ifdef CONFIG_ACPI void acpi_gpiochip_add(struct gpio_chip *chip); -- cgit v1.2.3 From c862b3823509195cc72a2168019ffcc765a8a0d2 Mon Sep 17 00:00:00 2001 From: Wei Lu Date: Wed, 11 Jul 2018 22:32:47 -0400 Subject: drm/amdkfd: Fix error codes in kfd_get_process MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit e47cb828eb3fca3e8999a0b9aa053dda18552071 ] Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process. This fixes kernel oopses when a child process calls KFD ioctls with a file descriptor inherited from the parent process. Signed-off-by: Wei Lu Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Acked-by: Christian König Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index eb1da83c9902..8cdd505784ed 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -125,6 +125,8 @@ struct kfd_process *kfd_get_process(const struct task_struct *thread) return ERR_PTR(-EINVAL); process = find_process(thread); + if (!process) + return ERR_PTR(-EINVAL); return process; } -- cgit v1.2.3 From 5e1924779a64aab97efa4e49e7fd9e9d8809008a Mon Sep 17 00:00:00 2001 From: Zhouyang Jia Date: Tue, 12 Jun 2018 12:40:03 +0800 Subject: rtc: bq4802: add error handling for devm_ioremap [ Upstream commit 7874b919866ba91bac253fa219d3d4c82bb944df ] When devm_ioremap fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling devm_ioremap. Signed-off-by: Zhouyang Jia Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/rtc/rtc-bq4802.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/rtc/rtc-bq4802.c b/drivers/rtc/rtc-bq4802.c index bd170cb3361c..5747a54cbd42 100644 --- a/drivers/rtc/rtc-bq4802.c +++ b/drivers/rtc/rtc-bq4802.c @@ -164,6 +164,10 @@ static int bq4802_probe(struct platform_device *pdev) } else if (p->r->flags & IORESOURCE_MEM) { p->regs = devm_ioremap(&pdev->dev, p->r->start, resource_size(p->r)); + if (!p->regs){ + err = -ENOMEM; + goto out; + } p->read = bq4802_read_mem; p->write = bq4802_write_mem; } else { -- cgit v1.2.3 From e573a9830c52d16f4dcbbd5fa04ce2fbaa007467 Mon Sep 17 00:00:00 2001 From: Timo Wischer Date: Tue, 10 Jul 2018 17:28:45 +0200 Subject: ALSA: pcm: Fix snd_interval_refine first/last with open min/max [ Upstream commit ff2d6acdf6f13d9f8fdcd890844c6d7535ac1f10 ] Without this commit the following intervals [x y), (x y) were be replaced to (y-1 y) by snd_interval_refine_last(). This was also done if y-1 is part of the previous interval. With this changes it will be replaced with [y-1 y) in case of y-1 is part of the previous interval. A similar behavior will be used for snd_interval_refine_first(). This commit adapts the changes for alsa-lib of commit 9bb985c ("pcm: snd_interval_refine_first/last: exclude value only if also excluded before") Signed-off-by: Timo Wischer Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/core/pcm_lib.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 4c145d6bccd4..5bc7ddf8fc70 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -648,27 +648,33 @@ EXPORT_SYMBOL(snd_interval_refine); static int snd_interval_refine_first(struct snd_interval *i) { + const unsigned int last_max = i->max; + if (snd_BUG_ON(snd_interval_empty(i))) return -EINVAL; if (snd_interval_single(i)) return 0; i->max = i->min; - i->openmax = i->openmin; - if (i->openmax) + if (i->openmin) i->max++; + /* only exclude max value if also excluded before refine */ + i->openmax = (i->openmax && i->max >= last_max); return 1; } static int snd_interval_refine_last(struct snd_interval *i) { + const unsigned int last_min = i->min; + if (snd_BUG_ON(snd_interval_empty(i))) return -EINVAL; if (snd_interval_single(i)) return 0; i->min = i->max; - i->openmin = i->openmax; - if (i->openmin) + if (i->openmax) i->min--; + /* only exclude min value if also excluded before refine */ + i->openmin = (i->openmin && i->min <= last_min); return 1; } -- cgit v1.2.3 From 5f5ea78ba60cf330bb884e56125ee49c5b30730f Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 29 May 2018 19:12:18 -0700 Subject: selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress [ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ] In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect. Thus, this patch checks to see if the clock was being adjusted when we fail so that we don't cause false negatives. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Miroslav Lichvar Cc: Richard Cochran Cc: Prarit Bhargava Cc: Stephen Boyd Cc: Shuah Khan Cc: linux-kselftest@vger.kernel.org Suggested-by: Miroslav Lichvar Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman --- tools/testing/selftests/timers/raw_skew.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c index 30906bfd9c1b..0ab937a17ebb 100644 --- a/tools/testing/selftests/timers/raw_skew.c +++ b/tools/testing/selftests/timers/raw_skew.c @@ -146,6 +146,11 @@ int main(int argv, char **argc) printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000))); if (llabs(eppm - ppm) > 1000) { + if (tx1.offset || tx2.offset || + tx1.freq != tx2.freq || tx1.tick != tx2.tick) { + printf(" [SKIP]\n"); + return ksft_exit_skip("The clock was adjusted externally. Shutdown NTPd or other time sync daemons\n"); + } printf(" [FAILED]\n"); return ksft_exit_fail(); } -- cgit v1.2.3 From 4951eb4bb6d665ff817333a1db79d8eff4def6fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:38:09 +0300 Subject: drm/panel: type promotion bug in s6e8aa0_read_mtp_id() [ Upstream commit cd0e0ca69109d025b1a1b6609f70682db62138b0 ] The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca06371 ("drm/panel: add S6E8AA0 driver") Signed-off-by: Dan Carpenter Reviewed-by: Andrzej Hajda Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c index a188a3959f1a..6ad827b93ae1 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c @@ -823,7 +823,7 @@ static void s6e8aa0_read_mtp_id(struct s6e8aa0 *ctx) int ret, i; ret = s6e8aa0_dcs_read(ctx, 0xd1, id, ARRAY_SIZE(id)); - if (ret < ARRAY_SIZE(id) || id[0] == 0x00) { + if (ret < 0 || ret < ARRAY_SIZE(id) || id[0] == 0x00) { dev_err(ctx->dev, "read id failed\n"); ctx->error = -EIO; return; -- cgit v1.2.3 From 86312d58a9defcc840c8f68ff36d82130cb84c28 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 2 Jul 2018 15:59:39 -0700 Subject: pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant [ Upstream commit 1cf86bc21257a330e3af51f2a4e885f1a705f6a5 ] If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. >From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by: Douglas Anderson Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 6c42ca14d2fd..4ea810cafaac 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -291,31 +291,47 @@ static int pmic_gpio_config_get(struct pinctrl_dev *pctldev, switch (param) { case PIN_CONFIG_DRIVE_PUSH_PULL: - arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_CMOS; + if (pad->buffer_type != PMIC_GPIO_OUT_BUF_CMOS) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: - arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS; + if (pad->buffer_type != PMIC_GPIO_OUT_BUF_OPEN_DRAIN_NMOS) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_DRIVE_OPEN_SOURCE: - arg = pad->buffer_type == PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS; + if (pad->buffer_type != PMIC_GPIO_OUT_BUF_OPEN_DRAIN_PMOS) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_BIAS_PULL_DOWN: - arg = pad->pullup == PMIC_GPIO_PULL_DOWN; + if (pad->pullup != PMIC_GPIO_PULL_DOWN) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_BIAS_DISABLE: - arg = pad->pullup = PMIC_GPIO_PULL_DISABLE; + if (pad->pullup != PMIC_GPIO_PULL_DISABLE) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_BIAS_PULL_UP: - arg = pad->pullup == PMIC_GPIO_PULL_UP_30; + if (pad->pullup != PMIC_GPIO_PULL_UP_30) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: - arg = !pad->is_enabled; + if (pad->is_enabled) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_POWER_SOURCE: arg = pad->power_source; break; case PIN_CONFIG_INPUT_ENABLE: - arg = pad->input_enabled; + if (!pad->input_enabled) + return -EINVAL; + arg = 1; break; case PIN_CONFIG_OUTPUT: arg = pad->out_value; -- cgit v1.2.3 From 8b97b2ec3672471fa2b0a6242001280b9854ad8a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 21 Aug 2018 11:59:53 +0200 Subject: USB: serial: ti_usb_3410_5052: fix array underflow in completion handler commit 5dfdd24eb3d39d815bc952ae98128e967c9bba49 upstream. Similarly to a recently reported bug in io_ti, a malicious USB device could set port_number to a negative value and we would underflow the port array in the interrupt completion handler. As these devices only have one or two ports, fix this by making sure we only consider the seventh bit when determining the port number (and ignore bits 0xb0 which are typically set to 0x30). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 98f35c656c02..0cd247f75b8b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -227,7 +227,7 @@ struct ti_interrupt { } __attribute__((packed)); /* Interrupt codes */ -#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TI_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01) #define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) #define TI_CODE_HARDWARE_ERROR 0xFF #define TI_CODE_DATA_ERROR 0x03 -- cgit v1.2.3 From 24328b80de178d4ece8175481349ae33ba3ca65f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Jul 2018 15:29:31 +0300 Subject: mei: bus: type promotion bug in mei_nfc_if_version() commit b40b3e9358fbafff6a4ba0f4b9658f6617146f9c upstream. We accidentally removed the check for negative returns without considering the issue of type promotion. The "if_version_length" variable is type size_t so if __mei_cl_recv() returns a negative then "bytes_recv" is type promoted to a high positive value and treated as success. Cc: Fixes: 582ab27a063a ("mei: bus: fix received data size check in NFC fixup") Signed-off-by: Dan Carpenter Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index bdc7fcd80eca..9dcdc6f41ceb 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -151,7 +151,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); - if (bytes_recv < if_version_length) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err; -- cgit v1.2.3 From 30eee1c68c52a02ec54730bfbe3ba4e3ff3a7d6e Mon Sep 17 00:00:00 2001 From: David Rivshin Date: Wed, 27 Apr 2016 21:32:31 -0400 Subject: drivers: net: cpsw: fix segfault in case of bad phy-handle MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit d733f7542ad47cf73e033c90cf55158587e1d060 upstream. If an emac node has a phy-handle property that points to something which is not a phy, then a segmentation fault will occur when the interface is brought up. This is because while phy_connect() will return ERR_PTR() on failure, of_phy_connect() will return NULL. The common error check uses IS_ERR(), and so missed when of_phy_connect() fails. The NULL pointer is then dereferenced. Also, the common error message referenced slave->data->phy_id, which would be empty in the case of phy-handle. Instead, use the name of the device_node as a useful identifier. And in the phy_id case add the error code for completeness. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Signed-off-by: David Rivshin Signed-off-by: David S. Miller [SZ Lin (林上智): Tweak the patch to use original print function of dev_info()] Signed-off-by: SZ Lin (林上智) Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/ti/cpsw.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index c2e110b2549b..c1217a87d535 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1164,25 +1164,34 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast, 1 << slave_port, 0, 0, ALE_MCAST_FWD_2); - if (slave->data->phy_node) + if (slave->data->phy_node) { slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node, &cpsw_adjust_link, 0, slave->data->phy_if); - else + if (!slave->phy) { + dev_err(priv->dev, "phy \"%s\" not found on slave %d\n", + slave->data->phy_node->full_name, + slave->slave_num); + return; + } + } else { slave->phy = phy_connect(priv->ndev, slave->data->phy_id, &cpsw_adjust_link, slave->data->phy_if); - if (IS_ERR(slave->phy)) { - dev_err(priv->dev, "phy %s not found on slave %d\n", - slave->data->phy_id, slave->slave_num); - slave->phy = NULL; - } else { - dev_info(priv->dev, "phy found : id is : 0x%x\n", - slave->phy->phy_id); - phy_start(slave->phy); - - /* Configure GMII_SEL register */ - cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, - slave->slave_num); + if (IS_ERR(slave->phy)) { + dev_err(priv->dev, + "phy \"%s\" not found on slave %d, err %ld\n", + slave->data->phy_id, slave->slave_num, + PTR_ERR(slave->phy)); + slave->phy = NULL; + return; + } } + + dev_info(priv->dev, "phy found : id is : 0x%x\n", slave->phy->phy_id); + + phy_start(slave->phy); + + /* Configure GMII_SEL register */ + cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num); } static inline void cpsw_add_default_vlan(struct cpsw_priv *priv) -- cgit v1.2.3 From 262ea6c0c422da1c5c8243cfde148fa9fdad7a26 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 30 Aug 2018 11:01:21 -0700 Subject: MIPS: VDSO: Match data page cache colouring when D$ aliases commit 0f02cfbc3d9e413d450d8d0fd660077c23f67eff upstream. When a system suffers from dcache aliasing a user program may observe stale VDSO data from an aliased cache line. Notably this can break the expectation that clock_gettime(CLOCK_MONOTONIC, ...) is, as its name suggests, monotonic. In order to ensure that users observe updates to the VDSO data page as intended, align the user mappings of the VDSO data page such that their cache colouring matches that of the virtual address range which the kernel will use to update the data page - typically its unmapped address within kseg0. This ensures that we don't introduce aliasing cache lines for the VDSO data page, and therefore that userland will observe updates without requiring cache invalidation. Signed-off-by: Paul Burton Reported-by: Hauke Mehrtens Reported-by: Rene Nielsen Reported-by: Alexandre Belloni Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Patchwork: https://patchwork.linux-mips.org/patch/20344/ Tested-by: Alexandre Belloni Tested-by: Hauke Mehrtens Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman --- arch/mips/kernel/vdso.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c index 5649a9e429e0..aca06b18c43e 100644 --- a/arch/mips/kernel/vdso.c +++ b/arch/mips/kernel/vdso.c @@ -14,12 +14,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include /* Kernel-provided data used by the VDSO. */ @@ -118,12 +120,30 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) vvar_size = gic_size + PAGE_SIZE; size = vvar_size + image->size; + /* + * Find a region that's large enough for us to perform the + * colour-matching alignment below. + */ + if (cpu_has_dc_aliases) + size += shm_align_mask + 1; + base = get_unmapped_area(NULL, 0, size, 0, 0); if (IS_ERR_VALUE(base)) { ret = base; goto out; } + /* + * If we suffer from dcache aliasing, ensure that the VDSO data page + * mapping is coloured the same as the kernel's mapping of that memory. + * This ensures that when the kernel updates the VDSO data userland + * will observe it without requiring cache invalidations. + */ + if (cpu_has_dc_aliases) { + base = __ALIGN_MASK(base, shm_align_mask); + base += ((unsigned long)&vdso_data - gic_size) & shm_align_mask; + } + data_addr = base + gic_size; vdso_addr = data_addr + PAGE_SIZE; -- cgit v1.2.3 From 9fbcdd1319b481591803d29a458add4cf79e5431 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 26 Sep 2018 08:35:10 +0200 Subject: Linux 4.4.158 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2d55f88e6a08..d07a6283b67e 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 157 +SUBLEVEL = 158 EXTRAVERSION = NAME = Blurry Fish Butt -- cgit v1.2.3