From 9f75e9b74a45d7d3c343c8979f49d5e6b92bbce3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 12 Oct 2007 23:04:23 +0200 Subject: x86_64: remove now unused code Remove the unused code after the switch to clock events. Signed-off-by: Thomas Gleixner Signed-off-by: Chris Wright Signed-off-by: Ingo Molnar Signed-off-by: Arjan van de Ven --- arch/x86/kernel/Makefile_32 | 4 +- arch/x86/kernel/Makefile_64 | 4 +- arch/x86/kernel/apic_64.c | 106 +------- arch/x86/kernel/hpet.c | 618 ++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/hpet_32.c | 618 -------------------------------------------- arch/x86/kernel/hpet_64.c | 444 ------------------------------- arch/x86/kernel/i8253.c | 208 +++++++++++++++ arch/x86/kernel/i8253_32.c | 208 --------------- arch/x86/kernel/time_64.c | 42 --- include/asm-x86/apic_64.h | 6 - include/asm-x86/proto.h | 7 - 11 files changed, 831 insertions(+), 1434 deletions(-) create mode 100644 arch/x86/kernel/hpet.c delete mode 100644 arch/x86/kernel/hpet_32.c delete mode 100644 arch/x86/kernel/hpet_64.c create mode 100644 arch/x86/kernel/i8253.c delete mode 100644 arch/x86/kernel/i8253_32.c diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32 index 10356443998e..7ff02063b858 100644 --- a/arch/x86/kernel/Makefile_32 +++ b/arch/x86/kernel/Makefile_32 @@ -7,7 +7,7 @@ extra-y := head_32.o init_task_32.o vmlinux.lds obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \ ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \ pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\ - quirks.o i8237.o topology.o alternative.o i8253_32.o tsc_32.o + quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += cpu/ @@ -37,7 +37,7 @@ obj-$(CONFIG_EFI) += efi_32.o efi_stub_32.o obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_HPET_TIMER) += hpet_32.o +obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64 index 080154e31502..43da66213a47 100644 --- a/arch/x86/kernel/Makefile_64 +++ b/arch/x86/kernel/Makefile_64 @@ -8,8 +8,8 @@ obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \ ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \ x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \ setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \ - pci-dma_64.o pci-nommu_64.o alternative.o hpet_32.o tsc_64.o bugs_64.o \ - perfctr-watchdog.o i8253_32.o + pci-dma_64.o pci-nommu_64.o alternative.o hpet.o tsc_64.o bugs_64.o \ + perfctr-watchdog.o i8253.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_X86_MCE) += mce_64.o therm_throt.o diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 118830cba1ae..1231365404c4 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -41,7 +41,6 @@ #include int apic_verbosity; -int apic_runs_main_timer; int apic_calibrate_pmtmr __initdata; int disable_apic_timer __cpuinitdata; @@ -129,15 +128,6 @@ static void lapic_timer_broadcast(cpumask_t mask) #endif } -/* - * cpu_mask that denotes the CPUs that needs timer interrupt coming in as - * IPIs in place of local APIC timers - */ -static cpumask_t timer_interrupt_broadcast_ipi_mask; - -/* Using APIC to generate smp_local_timer_interrupt? */ -int using_apic_timer __read_mostly = 0; - static void apic_pm_activate(void); void apic_wait_icr_idle(void) @@ -973,84 +963,6 @@ void __cpuinit setup_secondary_APIC_clock(void) setup_APIC_timer(); } -void disable_APIC_timer(void) -{ - if (using_apic_timer) { - unsigned long v; - - v = apic_read(APIC_LVTT); - /* - * When an illegal vector value (0-15) is written to an LVT - * entry and delivery mode is Fixed, the APIC may signal an - * illegal vector error, with out regard to whether the mask - * bit is set or whether an interrupt is actually seen on input. - * - * Boot sequence might call this function when the LVTT has - * '0' vector value. So make sure vector field is set to - * valid value. - */ - v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, v); - } -} - -void enable_APIC_timer(void) -{ - int cpu = smp_processor_id(); - - if (using_apic_timer && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - unsigned long v; - - v = apic_read(APIC_LVTT); - apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED); - } -} - -void switch_APIC_timer_to_ipi(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - disable_APIC_timer(); - cpu_set(cpu, timer_interrupt_broadcast_ipi_mask); - } -} -EXPORT_SYMBOL(switch_APIC_timer_to_ipi); - -void smp_send_timer_broadcast_ipi(void) -{ - int cpu = smp_processor_id(); - cpumask_t mask; - - cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask); - - if (cpu_isset(cpu, mask)) { - cpu_clear(cpu, mask); - add_pda(apic_timer_irqs, 1); - smp_local_timer_interrupt(); - } - - if (!cpus_empty(mask)) { - send_IPI_mask(mask, LOCAL_TIMER_VECTOR); - } -} - -void switch_ipi_to_APIC_timer(void *cpumask) -{ - cpumask_t mask = *(cpumask_t *)cpumask; - int cpu = smp_processor_id(); - - if (cpu_isset(cpu, mask) && - cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) { - cpu_clear(cpu, timer_interrupt_broadcast_ipi_mask); - enable_APIC_timer(); - } -} -EXPORT_SYMBOL(switch_ipi_to_APIC_timer); - int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; @@ -1297,21 +1209,7 @@ static __init int setup_noapictimer(char *str) disable_apic_timer = 1; return 1; } - -static __init int setup_apicmaintimer(char *str) -{ - apic_runs_main_timer = 1; - - return 1; -} -__setup("apicmaintimer", setup_apicmaintimer); - -static __init int setup_noapicmaintimer(char *str) -{ - apic_runs_main_timer = -1; - return 1; -} -__setup("noapicmaintimer", setup_noapicmaintimer); +__setup("noapictimer", setup_noapictimer); static __init int setup_apicpmtimer(char *s) { @@ -1321,5 +1219,3 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); -__setup("noapictimer", setup_noapictimer); - diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c new file mode 100644 index 000000000000..dbe0e1d44113 --- /dev/null +++ b/arch/x86/kernel/hpet.c @@ -0,0 +1,618 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define HPET_MASK CLOCKSOURCE_MASK(32) +#define HPET_SHIFT 22 + +/* FSEC = 10^-15 NSEC = 10^-9 */ +#define FSEC_PER_NSEC 1000000 + +/* + * HPET address is set in acpi/boot.c, when an ACPI entry exists + */ +unsigned long hpet_address; +static void __iomem *hpet_virt_address; + +/* Temporary hack. Cleanup after x86_64 clock events conversion */ +#undef hpet_readl +#undef hpet_writel + +static inline unsigned long hpet_readl(unsigned long a) +{ + return readl(hpet_virt_address + a); +} + +static inline void hpet_writel(unsigned long d, unsigned long a) +{ + writel(d, hpet_virt_address + a); +} + +#ifdef CONFIG_X86_64 + +#include + +static inline void hpet_set_mapping(void) +{ + set_fixmap_nocache(FIX_HPET_BASE, hpet_address); + __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); + hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); +} + +static inline void hpet_clear_mapping(void) +{ + hpet_virt_address = NULL; +} + +#else + +static inline void hpet_set_mapping(void) +{ + hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); +} + +static inline void hpet_clear_mapping(void) +{ + iounmap(hpet_virt_address); + hpet_virt_address = NULL; +} +#endif + +/* + * HPET command line enable / disable + */ +static int boot_hpet_disable; + +static int __init hpet_setup(char* str) +{ + if (str) { + if (!strncmp("disable", str, 7)) + boot_hpet_disable = 1; + } + return 1; +} +__setup("hpet=", hpet_setup); + +static int __init disable_hpet(char *str) +{ + boot_hpet_disable = 1; + return 1; +} +__setup("nohpet", disable_hpet); + +static inline int is_hpet_capable(void) +{ + return (!boot_hpet_disable && hpet_address); +} + +/* + * HPET timer interrupt enable / disable + */ +static int hpet_legacy_int_enabled; + +/** + * is_hpet_enabled - check whether the hpet timer interrupt is enabled + */ +int is_hpet_enabled(void) +{ + return is_hpet_capable() && hpet_legacy_int_enabled; +} + +/* + * When the hpet driver (/dev/hpet) is enabled, we need to reserve + * timer 0 and timer 1 in case of RTC emulation. + */ +#ifdef CONFIG_HPET +static void hpet_reserve_platform_timers(unsigned long id) +{ + struct hpet __iomem *hpet = hpet_virt_address; + struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; + unsigned int nrtimers, i; + struct hpet_data hd; + + nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + + memset(&hd, 0, sizeof (hd)); + hd.hd_phys_address = hpet_address; + hd.hd_address = hpet; + hd.hd_nirqs = nrtimers; + hd.hd_flags = HPET_DATA_PLATFORM; + hpet_reserve_timer(&hd, 0); + +#ifdef CONFIG_HPET_EMULATE_RTC + hpet_reserve_timer(&hd, 1); +#endif + + hd.hd_irq[0] = HPET_LEGACY_8254; + hd.hd_irq[1] = HPET_LEGACY_RTC; + + for (i = 2; i < nrtimers; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + + hpet_alloc(&hd); + +} +#else +static void hpet_reserve_platform_timers(unsigned long id) { } +#endif + +/* + * Common hpet info + */ +static unsigned long hpet_period; + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt); + +/* + * The hpet clock event device + */ +static struct clock_event_device hpet_clockevent = { + .name = "hpet", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = hpet_set_mode, + .set_next_event = hpet_next_event, + .shift = 32, + .irq = 0, +}; + +static void hpet_start_counter(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg &= ~HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); + hpet_writel(0, HPET_COUNTER); + hpet_writel(0, HPET_COUNTER + 4); + cfg |= HPET_CFG_ENABLE; + hpet_writel(cfg, HPET_CFG); +} + +static void hpet_enable_int(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); + + cfg |= HPET_CFG_LEGACY; + hpet_writel(cfg, HPET_CFG); + hpet_legacy_int_enabled = 1; +} + +static void hpet_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long cfg, cmp, now; + uint64_t delta; + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; + delta >>= hpet_clockevent.shift; + now = hpet_readl(HPET_COUNTER); + cmp = now + (unsigned long) delta; + cfg = hpet_readl(HPET_T0_CFG); + cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | + HPET_TN_SETVAL | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + /* + * The first write after writing TN_SETVAL to the + * config register sets the counter value, the second + * write sets the period. + */ + hpet_writel(cmp, HPET_T0_CMP); + udelay(1); + hpet_writel((unsigned long) delta, HPET_T0_CMP); + break; + + case CLOCK_EVT_MODE_ONESHOT: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + cfg = hpet_readl(HPET_T0_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T0_CFG); + break; + + case CLOCK_EVT_MODE_RESUME: + hpet_enable_int(); + break; + } +} + +static int hpet_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long cnt; + + cnt = hpet_readl(HPET_COUNTER); + cnt += delta; + hpet_writel(cnt, HPET_T0_CMP); + + return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; +} + +/* + * Clock source related code + */ +static cycle_t read_hpet(void) +{ + return (cycle_t)hpet_readl(HPET_COUNTER); +} + +#ifdef CONFIG_X86_64 +static cycle_t __vsyscall_fn vread_hpet(void) +{ + return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); +} +#endif + +static struct clocksource clocksource_hpet = { + .name = "hpet", + .rating = 250, + .read = read_hpet, + .mask = HPET_MASK, + .shift = HPET_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = hpet_start_counter, +#ifdef CONFIG_X86_64 + .vread = vread_hpet, +#endif +}; + +/* + * Try to setup the HPET timer + */ +int __init hpet_enable(void) +{ + unsigned long id; + uint64_t hpet_freq; + u64 tmp, start, now; + cycle_t t1; + + if (!is_hpet_capable()) + return 0; + + hpet_set_mapping(); + + /* + * Read the period and check for a sane value: + */ + hpet_period = hpet_readl(HPET_PERIOD); + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) + goto out_nohpet; + + /* + * The period is a femto seconds value. We need to calculate the + * scaled math multiplication factor for nanosecond to hpet tick + * conversion. + */ + hpet_freq = 1000000000000000ULL; + do_div(hpet_freq, hpet_period); + hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, + NSEC_PER_SEC, 32); + /* Calculate the min / max delta */ + hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &hpet_clockevent); + hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, + &hpet_clockevent); + + /* + * Read the HPET ID register to retrieve the IRQ routing + * information and the number of channels + */ + id = hpet_readl(HPET_ID); + +#ifdef CONFIG_HPET_EMULATE_RTC + /* + * The legacy routing mode needs at least two channels, tick timer + * and the rtc emulation channel. + */ + if (!(id & HPET_ID_NUMBER)) + goto out_nohpet; +#endif + + /* Start the counter */ + hpet_start_counter(); + + /* Verify whether hpet counter works */ + t1 = read_hpet(); + rdtscll(start); + + /* + * We don't know the TSC frequency yet, but waiting for + * 200000 TSC cycles is safe: + * 4 GHz == 50us + * 1 GHz == 200us + */ + do { + rep_nop(); + rdtscll(now); + } while ((now - start) < 200000UL); + + if (t1 == read_hpet()) { + printk(KERN_WARNING + "HPET counter not counting. HPET disabled\n"); + goto out_nohpet; + } + + /* Initialize and register HPET clocksource + * + * hpet period is in femto seconds per cycle + * so we need to convert this to ns/cyc units + * aproximated by mult/2^shift + * + * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift + * fsec/cyc * 1ns/1000000fsec * 2^shift = mult + * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult + * (fsec/cyc << shift)/1000000 = mult + * (hpet_period << shift)/FSEC_PER_NSEC = mult + */ + tmp = (u64)hpet_period << HPET_SHIFT; + do_div(tmp, FSEC_PER_NSEC); + clocksource_hpet.mult = (u32)tmp; + + clocksource_register(&clocksource_hpet); + + if (id & HPET_ID_LEGSUP) { + hpet_enable_int(); + /* + * Start hpet with the boot cpu mask and make it + * global after the IO_APIC has been initialized. + */ + hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); + clockevents_register_device(&hpet_clockevent); + global_clock_event = &hpet_clockevent; + return 1; + } + return 0; + +out_nohpet: + hpet_clear_mapping(); + boot_hpet_disable = 1; + return 0; +} + +/* + * Needs to be late, as the reserve_timer code calls kalloc ! + * + * Not a problem on i386 as hpet_enable is called from late_time_init, + * but on x86_64 it is necessary ! + */ +static __init int hpet_late_init(void) +{ + if (!is_hpet_capable()) + return -ENODEV; + + hpet_reserve_platform_timers(hpet_readl(HPET_ID)); + return 0; +} +fs_initcall(hpet_late_init); + +#ifdef CONFIG_HPET_EMULATE_RTC + +/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET + * is enabled, we support RTC interrupt functionality in software. + * RTC has 3 kinds of interrupts: + * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock + * is updated + * 2) Alarm Interrupt - generate an interrupt at a specific time of day + * 3) Periodic Interrupt - generate periodic interrupt, with frequencies + * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) + * (1) and (2) above are implemented using polling at a frequency of + * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt + * overhead. (DEFAULT_RTC_INT_FREQ) + * For (3), we use interrupts at 64Hz or user specified periodic + * frequency, whichever is higher. + */ +#include +#include + +#define DEFAULT_RTC_INT_FREQ 64 +#define DEFAULT_RTC_SHIFT 6 +#define RTC_NUM_INTS 1 + +static unsigned long hpet_rtc_flags; +static unsigned long hpet_prev_update_sec; +static struct rtc_time hpet_alarm_time; +static unsigned long hpet_pie_count; +static unsigned long hpet_t1_cmp; +static unsigned long hpet_default_delta; +static unsigned long hpet_pie_delta; +static unsigned long hpet_pie_limit; + +/* + * Timer 1 for RTC emulation. We use one shot mode, as periodic mode + * is not supported by all HPET implementations for timer 1. + * + * hpet_rtc_timer_init() is called when the rtc is initialized. + */ +int hpet_rtc_timer_init(void) +{ + unsigned long cfg, cnt, delta, flags; + + if (!is_hpet_enabled()) + return 0; + + if (!hpet_default_delta) { + uint64_t clc; + + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; + hpet_default_delta = (unsigned long) clc; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + local_irq_save(flags); + + cnt = delta + hpet_readl(HPET_COUNTER); + hpet_writel(cnt, HPET_T1_CMP); + hpet_t1_cmp = cnt; + + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_PERIODIC; + cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; + hpet_writel(cfg, HPET_T1_CFG); + + local_irq_restore(flags); + + return 1; +} + +/* + * The functions below are called from rtc driver. + * Return 0 if HPET is not being used. + * Otherwise do the necessary changes and return 1. + */ +int hpet_mask_rtc_irq_bit(unsigned long bit_mask) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags &= ~bit_mask; + return 1; +} + +int hpet_set_rtc_irq_bit(unsigned long bit_mask) +{ + unsigned long oldbits = hpet_rtc_flags; + + if (!is_hpet_enabled()) + return 0; + + hpet_rtc_flags |= bit_mask; + + if (!oldbits) + hpet_rtc_timer_init(); + + return 1; +} + +int hpet_set_alarm_time(unsigned char hrs, unsigned char min, + unsigned char sec) +{ + if (!is_hpet_enabled()) + return 0; + + hpet_alarm_time.tm_hour = hrs; + hpet_alarm_time.tm_min = min; + hpet_alarm_time.tm_sec = sec; + + return 1; +} + +int hpet_set_periodic_freq(unsigned long freq) +{ + uint64_t clc; + + if (!is_hpet_enabled()) + return 0; + + if (freq <= DEFAULT_RTC_INT_FREQ) + hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; + else { + clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; + do_div(clc, freq); + clc >>= hpet_clockevent.shift; + hpet_pie_delta = (unsigned long) clc; + } + return 1; +} + +int hpet_rtc_dropped_irq(void) +{ + return is_hpet_enabled(); +} + +static void hpet_rtc_timer_reinit(void) +{ + unsigned long cfg, delta; + int lost_ints = -1; + + if (unlikely(!hpet_rtc_flags)) { + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); + return; + } + + if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) + delta = hpet_default_delta; + else + delta = hpet_pie_delta; + + /* + * Increment the comparator value until we are ahead of the + * current count. + */ + do { + hpet_t1_cmp += delta; + hpet_writel(hpet_t1_cmp, HPET_T1_CMP); + lost_ints++; + } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); + + if (lost_ints) { + if (hpet_rtc_flags & RTC_PIE) + hpet_pie_count += lost_ints; + if (printk_ratelimit()) + printk(KERN_WARNING "rtc: lost %d interrupts\n", + lost_ints); + } +} + +irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) +{ + struct rtc_time curr_time; + unsigned long rtc_int_flag = 0; + + hpet_rtc_timer_reinit(); + + if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) + rtc_get_rtc_time(&curr_time); + + if (hpet_rtc_flags & RTC_UIE && + curr_time.tm_sec != hpet_prev_update_sec) { + rtc_int_flag = RTC_UF; + hpet_prev_update_sec = curr_time.tm_sec; + } + + if (hpet_rtc_flags & RTC_PIE && + ++hpet_pie_count >= hpet_pie_limit) { + rtc_int_flag |= RTC_PF; + hpet_pie_count = 0; + } + + if (hpet_rtc_flags & RTC_PIE && + (curr_time.tm_sec == hpet_alarm_time.tm_sec) && + (curr_time.tm_min == hpet_alarm_time.tm_min) && + (curr_time.tm_hour == hpet_alarm_time.tm_hour)) + rtc_int_flag |= RTC_AF; + + if (rtc_int_flag) { + rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); + rtc_interrupt(rtc_int_flag, dev_id); + } + return IRQ_HANDLED; +} +#endif diff --git a/arch/x86/kernel/hpet_32.c b/arch/x86/kernel/hpet_32.c deleted file mode 100644 index dbe0e1d44113..000000000000 --- a/arch/x86/kernel/hpet_32.c +++ /dev/null @@ -1,618 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define HPET_MASK CLOCKSOURCE_MASK(32) -#define HPET_SHIFT 22 - -/* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 - -/* - * HPET address is set in acpi/boot.c, when an ACPI entry exists - */ -unsigned long hpet_address; -static void __iomem *hpet_virt_address; - -/* Temporary hack. Cleanup after x86_64 clock events conversion */ -#undef hpet_readl -#undef hpet_writel - -static inline unsigned long hpet_readl(unsigned long a) -{ - return readl(hpet_virt_address + a); -} - -static inline void hpet_writel(unsigned long d, unsigned long a) -{ - writel(d, hpet_virt_address + a); -} - -#ifdef CONFIG_X86_64 - -#include - -static inline void hpet_set_mapping(void) -{ - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - hpet_virt_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); -} - -static inline void hpet_clear_mapping(void) -{ - hpet_virt_address = NULL; -} - -#else - -static inline void hpet_set_mapping(void) -{ - hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); -} - -static inline void hpet_clear_mapping(void) -{ - iounmap(hpet_virt_address); - hpet_virt_address = NULL; -} -#endif - -/* - * HPET command line enable / disable - */ -static int boot_hpet_disable; - -static int __init hpet_setup(char* str) -{ - if (str) { - if (!strncmp("disable", str, 7)) - boot_hpet_disable = 1; - } - return 1; -} -__setup("hpet=", hpet_setup); - -static int __init disable_hpet(char *str) -{ - boot_hpet_disable = 1; - return 1; -} -__setup("nohpet", disable_hpet); - -static inline int is_hpet_capable(void) -{ - return (!boot_hpet_disable && hpet_address); -} - -/* - * HPET timer interrupt enable / disable - */ -static int hpet_legacy_int_enabled; - -/** - * is_hpet_enabled - check whether the hpet timer interrupt is enabled - */ -int is_hpet_enabled(void) -{ - return is_hpet_capable() && hpet_legacy_int_enabled; -} - -/* - * When the hpet driver (/dev/hpet) is enabled, we need to reserve - * timer 0 and timer 1 in case of RTC emulation. - */ -#ifdef CONFIG_HPET -static void hpet_reserve_platform_timers(unsigned long id) -{ - struct hpet __iomem *hpet = hpet_virt_address; - struct hpet_timer __iomem *timer = &hpet->hpet_timers[2]; - unsigned int nrtimers, i; - struct hpet_data hd; - - nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; - - memset(&hd, 0, sizeof (hd)); - hd.hd_phys_address = hpet_address; - hd.hd_address = hpet; - hd.hd_nirqs = nrtimers; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); - -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - - for (i = 2; i < nrtimers; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - hpet_alloc(&hd); - -} -#else -static void hpet_reserve_platform_timers(unsigned long id) { } -#endif - -/* - * Common hpet info - */ -static unsigned long hpet_period; - -static void hpet_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt); -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt); - -/* - * The hpet clock event device - */ -static struct clock_event_device hpet_clockevent = { - .name = "hpet", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = hpet_set_mode, - .set_next_event = hpet_next_event, - .shift = 32, - .irq = 0, -}; - -static void hpet_start_counter(void) -{ - unsigned long cfg = hpet_readl(HPET_CFG); - - cfg &= ~HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); -} - -static void hpet_enable_int(void) -{ - unsigned long cfg = hpet_readl(HPET_CFG); - - cfg |= HPET_CFG_LEGACY; - hpet_writel(cfg, HPET_CFG); - hpet_legacy_int_enabled = 1; -} - -static void hpet_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long cfg, cmp, now; - uint64_t delta; - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * hpet_clockevent.mult; - delta >>= hpet_clockevent.shift; - now = hpet_readl(HPET_COUNTER); - cmp = now + (unsigned long) delta; - cfg = hpet_readl(HPET_T0_CFG); - cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | - HPET_TN_SETVAL | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - /* - * The first write after writing TN_SETVAL to the - * config register sets the counter value, the second - * write sets the period. - */ - hpet_writel(cmp, HPET_T0_CMP); - udelay(1); - hpet_writel((unsigned long) delta, HPET_T0_CMP); - break; - - case CLOCK_EVT_MODE_ONESHOT: - cfg = hpet_readl(HPET_T0_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T0_CFG); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - cfg = hpet_readl(HPET_T0_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T0_CFG); - break; - - case CLOCK_EVT_MODE_RESUME: - hpet_enable_int(); - break; - } -} - -static int hpet_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - unsigned long cnt; - - cnt = hpet_readl(HPET_COUNTER); - cnt += delta; - hpet_writel(cnt, HPET_T0_CMP); - - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; -} - -/* - * Clock source related code - */ -static cycle_t read_hpet(void) -{ - return (cycle_t)hpet_readl(HPET_COUNTER); -} - -#ifdef CONFIG_X86_64 -static cycle_t __vsyscall_fn vread_hpet(void) -{ - return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); -} -#endif - -static struct clocksource clocksource_hpet = { - .name = "hpet", - .rating = 250, - .read = read_hpet, - .mask = HPET_MASK, - .shift = HPET_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = hpet_start_counter, -#ifdef CONFIG_X86_64 - .vread = vread_hpet, -#endif -}; - -/* - * Try to setup the HPET timer - */ -int __init hpet_enable(void) -{ - unsigned long id; - uint64_t hpet_freq; - u64 tmp, start, now; - cycle_t t1; - - if (!is_hpet_capable()) - return 0; - - hpet_set_mapping(); - - /* - * Read the period and check for a sane value: - */ - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) - goto out_nohpet; - - /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. - */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, 32); - /* Calculate the min / max delta */ - hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, - &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); - - /* - * Read the HPET ID register to retrieve the IRQ routing - * information and the number of channels - */ - id = hpet_readl(HPET_ID); - -#ifdef CONFIG_HPET_EMULATE_RTC - /* - * The legacy routing mode needs at least two channels, tick timer - * and the rtc emulation channel. - */ - if (!(id & HPET_ID_NUMBER)) - goto out_nohpet; -#endif - - /* Start the counter */ - hpet_start_counter(); - - /* Verify whether hpet counter works */ - t1 = read_hpet(); - rdtscll(start); - - /* - * We don't know the TSC frequency yet, but waiting for - * 200000 TSC cycles is safe: - * 4 GHz == 50us - * 1 GHz == 200us - */ - do { - rep_nop(); - rdtscll(now); - } while ((now - start) < 200000UL); - - if (t1 == read_hpet()) { - printk(KERN_WARNING - "HPET counter not counting. HPET disabled\n"); - goto out_nohpet; - } - - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult - */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; - - clocksource_register(&clocksource_hpet); - - if (id & HPET_ID_LEGSUP) { - hpet_enable_int(); - /* - * Start hpet with the boot cpu mask and make it - * global after the IO_APIC has been initialized. - */ - hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); - clockevents_register_device(&hpet_clockevent); - global_clock_event = &hpet_clockevent; - return 1; - } - return 0; - -out_nohpet: - hpet_clear_mapping(); - boot_hpet_disable = 1; - return 0; -} - -/* - * Needs to be late, as the reserve_timer code calls kalloc ! - * - * Not a problem on i386 as hpet_enable is called from late_time_init, - * but on x86_64 it is necessary ! - */ -static __init int hpet_late_init(void) -{ - if (!is_hpet_capable()) - return -ENODEV; - - hpet_reserve_platform_timers(hpet_readl(HPET_ID)); - return 0; -} -fs_initcall(hpet_late_init); - -#ifdef CONFIG_HPET_EMULATE_RTC - -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include -#include - -#define DEFAULT_RTC_INT_FREQ 64 -#define DEFAULT_RTC_SHIFT 6 -#define RTC_NUM_INTS 1 - -static unsigned long hpet_rtc_flags; -static unsigned long hpet_prev_update_sec; -static struct rtc_time hpet_alarm_time; -static unsigned long hpet_pie_count; -static unsigned long hpet_t1_cmp; -static unsigned long hpet_default_delta; -static unsigned long hpet_pie_delta; -static unsigned long hpet_pie_limit; - -/* - * Timer 1 for RTC emulation. We use one shot mode, as periodic mode - * is not supported by all HPET implementations for timer 1. - * - * hpet_rtc_timer_init() is called when the rtc is initialized. - */ -int hpet_rtc_timer_init(void) -{ - unsigned long cfg, cnt, delta, flags; - - if (!is_hpet_enabled()) - return 0; - - if (!hpet_default_delta) { - uint64_t clc; - - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; - clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT; - hpet_default_delta = (unsigned long) clc; - } - - if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) - delta = hpet_default_delta; - else - delta = hpet_pie_delta; - - local_irq_save(flags); - - cnt = delta + hpet_readl(HPET_COUNTER); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - hpet_rtc_flags &= ~bit_mask; - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - unsigned long oldbits = hpet_rtc_flags; - - if (!is_hpet_enabled()) - return 0; - - hpet_rtc_flags |= bit_mask; - - if (!oldbits) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, - unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - hpet_alarm_time.tm_hour = hrs; - hpet_alarm_time.tm_min = min; - hpet_alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - uint64_t clc; - - if (!is_hpet_enabled()) - return 0; - - if (freq <= DEFAULT_RTC_INT_FREQ) - hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq; - else { - clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC; - do_div(clc, freq); - clc >>= hpet_clockevent.shift; - hpet_pie_delta = (unsigned long) clc; - } - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - return is_hpet_enabled(); -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned long cfg, delta; - int lost_ints = -1; - - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) - delta = hpet_default_delta; - else - delta = hpet_pie_delta; - - /* - * Increment the comparator value until we are ahead of the - * current count. - */ - do { - hpet_t1_cmp += delta; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - lost_ints++; - } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0); - - if (lost_ints) { - if (hpet_rtc_flags & RTC_PIE) - hpet_pie_count += lost_ints; - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost %d interrupts\n", - lost_ints); - } -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - - hpet_rtc_timer_reinit(); - - if (hpet_rtc_flags & (RTC_UIE | RTC_AIE)) - rtc_get_rtc_time(&curr_time); - - if (hpet_rtc_flags & RTC_UIE && - curr_time.tm_sec != hpet_prev_update_sec) { - rtc_int_flag = RTC_UF; - hpet_prev_update_sec = curr_time.tm_sec; - } - - if (hpet_rtc_flags & RTC_PIE && - ++hpet_pie_count >= hpet_pie_limit) { - rtc_int_flag |= RTC_PF; - hpet_pie_count = 0; - } - - if (hpet_rtc_flags & RTC_PIE && - (curr_time.tm_sec == hpet_alarm_time.tm_sec) && - (curr_time.tm_min == hpet_alarm_time.tm_min) && - (curr_time.tm_hour == hpet_alarm_time.tm_hour)) - rtc_int_flag |= RTC_AF; - - if (rtc_int_flag) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif diff --git a/arch/x86/kernel/hpet_64.c b/arch/x86/kernel/hpet_64.c deleted file mode 100644 index 1ebce2ec7eaf..000000000000 --- a/arch/x86/kernel/hpet_64.c +++ /dev/null @@ -1,444 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define HPET_MASK 0xFFFFFFFF -#define HPET_SHIFT 22 - -/* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 - -int nohpet __initdata; - -unsigned long hpet_address; -unsigned long hpet_period; /* fsecs / HPET clock */ -unsigned long hpet_tick; /* HPET clocks / interrupt */ - -int hpet_use_timer; /* Use counter of hpet for time keeping, - * otherwise PIT - */ - -#ifdef CONFIG_HPET -static __init int late_hpet_init(void) -{ - struct hpet_data hd; - unsigned int ntimer; - - if (!hpet_address) - return 0; - - memset(&hd, 0, sizeof(hd)); - - ntimer = hpet_readl(HPET_ID); - ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT; - ntimer++; - - /* - * Register with driver. - * Timer0 and Timer1 is used by platform. - */ - hd.hd_phys_address = hpet_address; - hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE); - hd.hd_nirqs = ntimer; - hd.hd_flags = HPET_DATA_PLATFORM; - hpet_reserve_timer(&hd, 0); -#ifdef CONFIG_HPET_EMULATE_RTC - hpet_reserve_timer(&hd, 1); -#endif - hd.hd_irq[0] = HPET_LEGACY_8254; - hd.hd_irq[1] = HPET_LEGACY_RTC; - if (ntimer > 2) { - struct hpet *hpet; - struct hpet_timer *timer; - int i; - - hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE); - timer = &hpet->hpet_timers[2]; - for (i = 2; i < ntimer; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & - Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; - - } - - hpet_alloc(&hd); - return 0; -} -fs_initcall(late_hpet_init); -#endif - -int hpet_timer_stop_set_go(unsigned long tick) -{ - unsigned int cfg; - -/* - * Stop the timers and reset the main counter. - */ - - cfg = hpet_readl(HPET_CFG); - cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY); - hpet_writel(cfg, HPET_CFG); - hpet_writel(0, HPET_COUNTER); - hpet_writel(0, HPET_COUNTER + 4); - -/* - * Set up timer 0, as periodic with first interrupt to happen at hpet_tick, - * and period also hpet_tick. - */ - if (hpet_use_timer) { - hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | - HPET_TN_32BIT, HPET_T0_CFG); - hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */ - hpet_writel(hpet_tick, HPET_T0_CMP); /* period */ - cfg |= HPET_CFG_LEGACY; - } -/* - * Go! - */ - - cfg |= HPET_CFG_ENABLE; - hpet_writel(cfg, HPET_CFG); - - return 0; -} - -static cycle_t read_hpet(void) -{ - return (cycle_t)hpet_readl(HPET_COUNTER); -} - -static cycle_t __vsyscall_fn vread_hpet(void) -{ - return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0); -} - -struct clocksource clocksource_hpet = { - .name = "hpet", - .rating = 250, - .read = read_hpet, - .mask = (cycle_t)HPET_MASK, - .mult = 0, /* set below */ - .shift = HPET_SHIFT, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .vread = vread_hpet, -}; - -int __init hpet_arch_init(void) -{ - unsigned int id; - u64 tmp; - - if (!hpet_address) - return -1; - set_fixmap_nocache(FIX_HPET_BASE, hpet_address); - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE); - -/* - * Read the period, compute tick and quotient. - */ - - id = hpet_readl(HPET_ID); - - if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER)) - return -1; - - hpet_period = hpet_readl(HPET_PERIOD); - if (hpet_period < 100000 || hpet_period > 100000000) - return -1; - - hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period; - - hpet_use_timer = (id & HPET_ID_LEGSUP); - - /* - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * aproximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult - */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; - clocksource_register(&clocksource_hpet); - - return hpet_timer_stop_set_go(hpet_tick); -} - -int hpet_reenable(void) -{ - return hpet_timer_stop_set_go(hpet_tick); -} - -#ifdef CONFIG_HPET_EMULATE_RTC -/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET - * is enabled, we support RTC interrupt functionality in software. - * RTC has 3 kinds of interrupts: - * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock - * is updated - * 2) Alarm Interrupt - generate an interrupt at a specific time of day - * 3) Periodic Interrupt - generate periodic interrupt, with frequencies - * 2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2) - * (1) and (2) above are implemented using polling at a frequency of - * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt - * overhead. (DEFAULT_RTC_INT_FREQ) - * For (3), we use interrupts at 64Hz or user specified periodic - * frequency, whichever is higher. - */ -#include - -#define DEFAULT_RTC_INT_FREQ 64 -#define RTC_NUM_INTS 1 - -static unsigned long UIE_on; -static unsigned long prev_update_sec; - -static unsigned long AIE_on; -static struct rtc_time alarm_time; - -static unsigned long PIE_on; -static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ; -static unsigned long PIE_count; - -static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */ -static unsigned int hpet_t1_cmp; /* cached comparator register */ - -int is_hpet_enabled(void) -{ - return hpet_address != 0; -} - -/* - * Timer 1 for RTC, we do not use periodic interrupt feature, - * even if HPET supports periodic interrupts on Timer 1. - * The reason being, to set up a periodic interrupt in HPET, we need to - * stop the main counter. And if we do that everytime someone diables/enables - * RTC, we will have adverse effect on main kernel timer running on Timer 0. - * So, for the time being, simulate the periodic interrupt in software. - * - * hpet_rtc_timer_init() is called for the first time and during subsequent - * interuppts reinit happens through hpet_rtc_timer_reinit(). - */ -int hpet_rtc_timer_init(void) -{ - unsigned int cfg, cnt; - unsigned long flags; - - if (!is_hpet_enabled()) - return 0; - /* - * Set the counter 1 and enable the interrupts. - */ - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - local_irq_save(flags); - - cnt = hpet_readl(HPET_COUNTER); - cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq); - hpet_writel(cnt, HPET_T1_CMP); - hpet_t1_cmp = cnt; - - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_PERIODIC; - cfg |= HPET_TN_ENABLE | HPET_TN_32BIT; - hpet_writel(cfg, HPET_T1_CFG); - - local_irq_restore(flags); - - return 1; -} - -static void hpet_rtc_timer_reinit(void) -{ - unsigned int cfg, cnt, ticks_per_int, lost_ints; - - if (unlikely(!(PIE_on | AIE_on | UIE_on))) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } - - if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ)) - hpet_rtc_int_freq = PIE_freq; - else - hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ; - - /* It is more accurate to use the comparator value than current count.*/ - ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq; - hpet_t1_cmp += ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - /* - * If the interrupt handler was delayed too long, the write above tries - * to schedule the next interrupt in the past and the hardware would - * not interrupt until the counter had wrapped around. - * So we have to check that the comparator wasn't set to a past time. - */ - cnt = hpet_readl(HPET_COUNTER); - if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) { - lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1; - /* Make sure that, even with the time needed to execute - * this code, the next scheduled interrupt has been moved - * back to the future: */ - lost_ints++; - - hpet_t1_cmp += lost_ints * ticks_per_int; - hpet_writel(hpet_t1_cmp, HPET_T1_CMP); - - if (PIE_on) - PIE_count += lost_ints; - - if (printk_ratelimit()) - printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n", - hpet_rtc_int_freq); - } -} - -/* - * The functions below are called from rtc driver. - * Return 0 if HPET is not being used. - * Otherwise do the necessary changes and return 1. - */ -int hpet_mask_rtc_irq_bit(unsigned long bit_mask) -{ - if (!is_hpet_enabled()) - return 0; - - if (bit_mask & RTC_UIE) - UIE_on = 0; - if (bit_mask & RTC_PIE) - PIE_on = 0; - if (bit_mask & RTC_AIE) - AIE_on = 0; - - return 1; -} - -int hpet_set_rtc_irq_bit(unsigned long bit_mask) -{ - int timer_init_reqd = 0; - - if (!is_hpet_enabled()) - return 0; - - if (!(PIE_on | AIE_on | UIE_on)) - timer_init_reqd = 1; - - if (bit_mask & RTC_UIE) { - UIE_on = 1; - } - if (bit_mask & RTC_PIE) { - PIE_on = 1; - PIE_count = 0; - } - if (bit_mask & RTC_AIE) { - AIE_on = 1; - } - - if (timer_init_reqd) - hpet_rtc_timer_init(); - - return 1; -} - -int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) -{ - if (!is_hpet_enabled()) - return 0; - - alarm_time.tm_hour = hrs; - alarm_time.tm_min = min; - alarm_time.tm_sec = sec; - - return 1; -} - -int hpet_set_periodic_freq(unsigned long freq) -{ - if (!is_hpet_enabled()) - return 0; - - PIE_freq = freq; - PIE_count = 0; - - return 1; -} - -int hpet_rtc_dropped_irq(void) -{ - if (!is_hpet_enabled()) - return 0; - - return 1; -} - -irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) -{ - struct rtc_time curr_time; - unsigned long rtc_int_flag = 0; - int call_rtc_interrupt = 0; - - hpet_rtc_timer_reinit(); - - if (UIE_on | AIE_on) { - rtc_get_rtc_time(&curr_time); - } - if (UIE_on) { - if (curr_time.tm_sec != prev_update_sec) { - /* Set update int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag = RTC_UF; - prev_update_sec = curr_time.tm_sec; - } - } - if (PIE_on) { - PIE_count++; - if (PIE_count >= hpet_rtc_int_freq/PIE_freq) { - /* Set periodic int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_PF; - PIE_count = 0; - } - } - if (AIE_on) { - if ((curr_time.tm_sec == alarm_time.tm_sec) && - (curr_time.tm_min == alarm_time.tm_min) && - (curr_time.tm_hour == alarm_time.tm_hour)) { - /* Set alarm int info, call real rtc int routine */ - call_rtc_interrupt = 1; - rtc_int_flag |= RTC_AF; - } - } - if (call_rtc_interrupt) { - rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8)); - rtc_interrupt(rtc_int_flag, dev_id); - } - return IRQ_HANDLED; -} -#endif - -static int __init nohpet_setup(char *s) -{ - nohpet = 1; - return 1; -} - -__setup("nohpet", nohpet_setup); diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c new file mode 100644 index 000000000000..ac15e4cbd9c1 --- /dev/null +++ b/arch/x86/kernel/i8253.c @@ -0,0 +1,208 @@ +/* + * i8253.c 8253/PIT functions + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +DEFINE_SPINLOCK(i8253_lock); +EXPORT_SYMBOL(i8253_lock); + +/* + * HPET replaces the PIT, when enabled. So we need to know, which of + * the two timers is used + */ +struct clock_event_device *global_clock_event; + +/* + * Initialize the PIT timer. + * + * This is also called after resume to bring the PIT into operation again. + */ +static void init_pit_timer(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + + switch(mode) { + case CLOCK_EVT_MODE_PERIODIC: + /* binary, mode 2, LSB/MSB, ch 0 */ + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ + outb(LATCH >> 8 , PIT_CH0); /* MSB */ + break; + + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (evt->mode == CLOCK_EVT_MODE_PERIODIC || + evt->mode == CLOCK_EVT_MODE_ONESHOT) { + outb_p(0x30, PIT_MODE); + outb_p(0, PIT_CH0); + outb_p(0, PIT_CH0); + } + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* One shot setup */ + outb_p(0x38, PIT_MODE); + break; + + case CLOCK_EVT_MODE_RESUME: + /* Nothing to do here */ + break; + } + spin_unlock_irqrestore(&i8253_lock, flags); +} + +/* + * Program the next event in oneshot mode + * + * Delta is given in PIT ticks + */ +static int pit_next_event(unsigned long delta, struct clock_event_device *evt) +{ + unsigned long flags; + + spin_lock_irqsave(&i8253_lock, flags); + outb_p(delta & 0xff , PIT_CH0); /* LSB */ + outb(delta >> 8 , PIT_CH0); /* MSB */ + spin_unlock_irqrestore(&i8253_lock, flags); + + return 0; +} + +/* + * On UP the PIT can serve all of the possible timer functions. On SMP systems + * it can be solely used for the global tick. + * + * The profiling and update capabilites are switched off once the local apic is + * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - + * !using_apic_timer decisions in do_timer_interrupt_hook() + */ +struct clock_event_device pit_clockevent = { + .name = "pit", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = init_pit_timer, + .set_next_event = pit_next_event, + .shift = 32, + .irq = 0, +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_pit_timer(void) +{ + /* + * Start pit with the boot cpu mask and make it global after the + * IO_APIC has been initialized. + */ + pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); + pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); + pit_clockevent.max_delta_ns = + clockevent_delta2ns(0x7FFF, &pit_clockevent); + pit_clockevent.min_delta_ns = + clockevent_delta2ns(0xF, &pit_clockevent); + clockevents_register_device(&pit_clockevent); + global_clock_event = &pit_clockevent; +} + +#ifndef CONFIG_X86_64 +/* + * Since the PIT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static cycle_t pit_read(void) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + spin_lock_irqsave(&i8253_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + outb_p(0x00, PIT_MODE); /* latch the count ASAP */ + count = inb_p(PIT_CH0); /* read the latched count */ + count |= inb_p(PIT_CH0) << 8; + + /* VIA686a test code... reset the latch if count > max + 1 */ + if (count > LATCH) { + outb_p(0x34, PIT_MODE); + outb_p(LATCH & 0xff, PIT_CH0); + outb(LATCH >> 8, PIT_CH0); + count = LATCH - 1; + } + + /* + * It's possible for count to appear to go the wrong way for a + * couple of reasons: + * + * 1. The timer counter underflows, but we haven't handled the + * resulting interrupt and incremented jiffies yet. + * 2. Hardware problem with the timer, not giving us continuous time, + * the counter does small "jumps" upwards on some Pentium systems, + * (see c't 95/10 page 335 for Neptun bug.) + * + * Previous attempts to handle these cases intelligently were + * buggy, so we just do the simple thing now. + */ + if (count > old_count && jifs == old_jifs) { + count = old_count; + } + old_count = count; + old_jifs = jifs; + + spin_unlock_irqrestore(&i8253_lock, flags); + + count = (LATCH - 1) - count; + + return (cycle_t)(jifs * LATCH) + count; +} + +static struct clocksource clocksource_pit = { + .name = "pit", + .rating = 110, + .read = pit_read, + .mask = CLOCKSOURCE_MASK(32), + .mult = 0, + .shift = 20, +}; + +static int __init init_pit_clocksource(void) +{ + if (num_possible_cpus() > 1) /* PIT does not scale! */ + return 0; + + clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); + return clocksource_register(&clocksource_pit); +} +arch_initcall(init_pit_clocksource); + +#endif diff --git a/arch/x86/kernel/i8253_32.c b/arch/x86/kernel/i8253_32.c deleted file mode 100644 index ac15e4cbd9c1..000000000000 --- a/arch/x86/kernel/i8253_32.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * i8253.c 8253/PIT functions - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -DEFINE_SPINLOCK(i8253_lock); -EXPORT_SYMBOL(i8253_lock); - -/* - * HPET replaces the PIT, when enabled. So we need to know, which of - * the two timers is used - */ -struct clock_event_device *global_clock_event; - -/* - * Initialize the PIT timer. - * - * This is also called after resume to bring the PIT into operation again. - */ -static void init_pit_timer(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - - switch(mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* binary, mode 2, LSB/MSB, ch 0 */ - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff , PIT_CH0); /* LSB */ - outb(LATCH >> 8 , PIT_CH0); /* MSB */ - break; - - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - if (evt->mode == CLOCK_EVT_MODE_PERIODIC || - evt->mode == CLOCK_EVT_MODE_ONESHOT) { - outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); - } - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* One shot setup */ - outb_p(0x38, PIT_MODE); - break; - - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do here */ - break; - } - spin_unlock_irqrestore(&i8253_lock, flags); -} - -/* - * Program the next event in oneshot mode - * - * Delta is given in PIT ticks - */ -static int pit_next_event(unsigned long delta, struct clock_event_device *evt) -{ - unsigned long flags; - - spin_lock_irqsave(&i8253_lock, flags); - outb_p(delta & 0xff , PIT_CH0); /* LSB */ - outb(delta >> 8 , PIT_CH0); /* MSB */ - spin_unlock_irqrestore(&i8253_lock, flags); - - return 0; -} - -/* - * On UP the PIT can serve all of the possible timer functions. On SMP systems - * it can be solely used for the global tick. - * - * The profiling and update capabilites are switched off once the local apic is - * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - - * !using_apic_timer decisions in do_timer_interrupt_hook() - */ -struct clock_event_device pit_clockevent = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = init_pit_timer, - .set_next_event = pit_next_event, - .shift = 32, - .irq = 0, -}; - -/* - * Initialize the conversion factor and the min/max deltas of the clock event - * structure and register the clock event source with the framework. - */ -void __init setup_pit_timer(void) -{ - /* - * Start pit with the boot cpu mask and make it global after the - * IO_APIC has been initialized. - */ - pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id()); - pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32); - pit_clockevent.max_delta_ns = - clockevent_delta2ns(0x7FFF, &pit_clockevent); - pit_clockevent.min_delta_ns = - clockevent_delta2ns(0xF, &pit_clockevent); - clockevents_register_device(&pit_clockevent); - global_clock_event = &pit_clockevent; -} - -#ifndef CONFIG_X86_64 -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(void) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) { - count = old_count; - } - old_count = count; - old_jifs = jifs; - - spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource clocksource_pit = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - -static int __init init_pit_clocksource(void) -{ - if (num_possible_cpus() > 1) /* PIT does not scale! */ - return 0; - - clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); - return clocksource_register(&clocksource_pit); -} -arch_initcall(init_pit_clocksource); - -#endif diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c index aca081c37884..e0134d6c88da 100644 --- a/arch/x86/kernel/time_64.c +++ b/arch/x86/kernel/time_64.c @@ -150,48 +150,6 @@ int update_persistent_clock(struct timespec now) return set_rtc_mmss(now.tv_sec); } -void main_timer_handler(void) -{ -/* - * Here we are in the timer irq handler. We have irqs locally disabled (so we - * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running - * on the other CPU, so we need a lock. We also need to lock the vsyscall - * variables, because both do_timer() and us change them -arca+vojtech - */ - - write_seqlock(&xtime_lock); - -/* - * Do the timer stuff. - */ - - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - -/* - * In the SMP case we use the local APIC timer interrupt to do the profiling, - * except when we simulate SMP mode on a uniprocessor system, in that case we - * have to call the local interrupt handler. - */ - - if (!using_apic_timer) - smp_local_timer_interrupt(); - - write_sequnlock(&xtime_lock); -} - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - if (apic_runs_main_timer > 1) - return IRQ_HANDLED; - main_timer_handler(); - if (using_apic_timer) - smp_send_timer_broadcast_ipi(); - return IRQ_HANDLED; -} - static irqreturn_t timer_event_interrupt(int irq, void *dev_id) { add_pda(irq0_irqs, 1); diff --git a/include/asm-x86/apic_64.h b/include/asm-x86/apic_64.h index f32f654d1f96..3c8f21eef0be 100644 --- a/include/asm-x86/apic_64.h +++ b/include/asm-x86/apic_64.h @@ -79,8 +79,6 @@ extern void smp_local_timer_interrupt (void); extern void setup_boot_APIC_clock (void); extern void setup_secondary_APIC_clock (void); extern int APIC_init_uniprocessor (void); -extern void disable_APIC_timer(void); -extern void enable_APIC_timer(void); extern void setup_apic_routing(void); extern void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector, @@ -95,10 +93,6 @@ extern int apic_is_clustered_box(void); #define K8_APIC_EXT_INT_MSG_EXT 0x7 #define K8_APIC_EXT_LVT_ENTRY_THRESHOLD 0 -void smp_send_timer_broadcast_ipi(void); -void switch_APIC_timer_to_ipi(void *cpumask); -void switch_ipi_to_APIC_timer(void *cpumask); - #define ARCH_APICTIMER_STOPS_ON_C3 1 extern unsigned boot_cpu_id; diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h index 31f20ad65876..c44a3a93b5a4 100644 --- a/include/asm-x86/proto.h +++ b/include/asm-x86/proto.h @@ -51,9 +51,6 @@ extern void reserve_bootmem_generic(unsigned long phys, unsigned len); extern void load_gs_index(unsigned gs); -extern void stop_timer_interrupt(void); -extern void main_timer_handler(void); - extern unsigned long end_pfn_map; extern void show_trace(struct task_struct *, struct pt_regs *, unsigned long * rsp); @@ -90,14 +87,10 @@ extern int timer_over_8254; extern int gsi_irq_sharing(int gsi); -extern void smp_local_timer_interrupt(void); - extern int force_mwait; long do_arch_prctl(struct task_struct *task, int code, unsigned long addr); -void i8254_timer_resume(void); - #define round_up(x,y) (((x) + (y) - 1) & ~((y)-1)) #define round_down(x,y) ((x) & ~((y)-1)) -- cgit v1.2.3