From dbccd791a3fbbdac12c33834b73beff3984988e9 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Tue, 11 Dec 2012 08:51:19 +0100 Subject: Bluetooth: Fix sending HCI commands after reset After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 705078a0cc39..81b44481d0d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2688,7 +2688,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); -- cgit v1.2.3 From eed307e290b96636def331375e065aca43f9069a Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Tue, 11 Dec 2012 11:41:20 +0800 Subject: Bluetooth: Add support for IMC Networks [13d3:3393] Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3393 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index b00000e8aef6..3418bf988d01 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -81,6 +81,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, + { USB_DEVICE(0x13d3, 0x3393) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -108,6 +109,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1d4ede5b892..acd5be40fc04 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -139,6 +139,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2c262b2a5235b7f5b18d4d58394511f76371d7cb Mon Sep 17 00:00:00 2001 From: Daniel Schaal Date: Sat, 29 Dec 2012 11:14:34 +0100 Subject: Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k. T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3006 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Schaal Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 3418bf988d01..afe9d8e8901d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -77,6 +77,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x04CA, 0x3006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -105,6 +106,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index acd5be40fc04..83ff97089e31 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 3a61eda81ebcfc006ebb1496764299d53e5bf67f Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:24:59 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04e Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index afe9d8e8901d..47fc6b5c6488 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -83,6 +83,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, + { USB_DEVICE(0x0489, 0xe04e) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 83ff97089e31..9a52f8b6bfd9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2582d529c44d12502a700f1c3db062b9f44679bc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:25:00 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e056 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 47fc6b5c6488..be178949bc8b 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -84,6 +84,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, + { USB_DEVICE(0x0489, 0xe056) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -114,6 +115,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9a52f8b6bfd9..3f6a993539e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -142,6 +142,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 0a9ab9bdb3e891762553f667066190c1d22ad62b Mon Sep 17 00:00:00 2001 From: Anderson Lizardo Date: Sun, 6 Jan 2013 18:28:53 -0400 Subject: Bluetooth: Fix incorrect strncpy() in hidp_setup_hid() The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index b2bcbe2dc328..a7352ff3fd1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -931,7 +931,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid->version = req->version; hid->country = req->country; - strncpy(hid->name, req->name, 128); + strncpy(hid->name, req->name, sizeof(req->name) - 1); snprintf(hid->phys, sizeof(hid->phys), "%pMR", &bt_sk(session->ctrl_sock->sk)->src); -- cgit v1.2.3 From f4d6f7dce71a5da93da50272ff1670bf2f1146b1 Mon Sep 17 00:00:00 2001 From: Sergio Cambra Date: Thu, 10 Jan 2013 01:06:55 +0100 Subject: Bluetooth device 04ca:3008 should use ath3k Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be178949bc8b..33c9a44a9678 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3f6a993539e8..7e351e345476 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -136,6 +136,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 7b064edae38d62d8587a8c574f93b53ce75ae749 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 10 Jan 2013 10:28:35 +0530 Subject: Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 8 -------- net/bluetooth/l2cap_core.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 596660d37c5e..0f78e34220c9 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2810,14 +2810,6 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb) if (conn) { hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF); - hci_dev_lock(hdev); - if (test_bit(HCI_MGMT, &hdev->dev_flags) && - !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) - mgmt_device_connected(hdev, &conn->dst, conn->type, - conn->dst_type, 0, NULL, 0, - conn->dev_class); - hci_dev_unlock(hdev); - /* Send to upper protocol */ l2cap_recv_acldata(conn, skb, flags); return; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2c78208d793e..22e658322845 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3727,6 +3727,17 @@ sendresp: static int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data) { + struct hci_dev *hdev = conn->hcon->hdev; + struct hci_conn *hcon = conn->hcon; + + hci_dev_lock(hdev); + if (test_bit(HCI_MGMT, &hdev->dev_flags) && + !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) + mgmt_device_connected(hdev, &hcon->dst, hcon->type, + hcon->dst_type, 0, NULL, 0, + hcon->dev_class); + hci_dev_unlock(hdev); + l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0); return 0; } -- cgit v1.2.3 From b7e98b5100aad9290d7f06fcb9d1e80f7f62f05f Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 3 Jan 2013 19:59:28 -0200 Subject: Bluetooth: Check if the hci connection exists in SCO shutdown Checking only for sco_conn seems to not be enough and lead to NULL dereferences in the code, check for hcon instead. <1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at 0000000 8 <4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0 <4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000 <4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c <0>[11340.226674] Stack: <4>[11340.226682] c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00 00000000 e0fdff5c <4>[11340.226718] c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852 d7813800 62262f10 <4>[11340.226752] e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac c175425c 00000041 <0>[11340.226793] Call Trace: <4>[11340.226813] [] ? sco_sock_clear_timer+0x27/0x60 <4>[11340.226831] [] ? local_bh_enable+0x68/0xd0 <4>[11340.226846] [] ? lock_sock_nested+0x4f/0x60 <4>[11340.226862] [] sco_sock_shutdown+0x67/0xb0 <4>[11340.226879] [] ? sockfd_lookup_light+0x22/0x80 <4>[11340.226897] [] sys_shutdown+0x30/0x60 <4>[11340.226912] [] sys_socketcall+0x1dc/0x2a0 <4>[11340.226929] [] ? trace_hardirqs_on_thunk+0xc/0x10 <4>[11340.226944] [] syscall_call+0x7/0xb <4>[11340.226960] [] ? restore_cur+0x5e/0xd7 <0>[11340.226969] Code: ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74 2f b8 0a 00 00 Reported-by: Chuansheng Liu Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 531a93d613d4..57f250c20e39 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -352,7 +352,7 @@ static void __sco_sock_close(struct sock *sk) case BT_CONNECTED: case BT_CONFIG: - if (sco_pi(sk)->conn) { + if (sco_pi(sk)->conn->hcon) { sk->sk_state = BT_DISCONN; sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT); hci_conn_put(sco_pi(sk)->conn->hcon); -- cgit v1.2.3 From d7b9c5204e9c6810a20d509ee47bc70419096e59 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:10 -0800 Subject: mwifiex: update config_bands during infra association Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 15 +-------------- drivers/net/wireless/mwifiex/sta_ioctl.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index efe525be27dd..e74e1b99419a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1459,7 +1459,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, struct cfg80211_ssid req_ssid; int ret, auth_type = 0; struct cfg80211_bss *bss = NULL; - u8 is_scanning_required = 0, config_bands = 0; + u8 is_scanning_required = 0; memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); @@ -1478,19 +1478,6 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, /* disconnect before try to associate */ mwifiex_deauthenticate(priv, NULL); - if (channel) { - if (mode == NL80211_IFTYPE_STATION) { - if (channel->band == IEEE80211_BAND_2GHZ) - config_bands = BAND_B | BAND_G | BAND_GN; - else - config_bands = BAND_A | BAND_AN; - - if (!((config_bands | priv->adapter->fw_bands) & - ~priv->adapter->fw_bands)) - priv->adapter->config_bands = config_bands; - } - } - /* As this is new association, clear locally stored * keys and security related flags */ priv->sec_info.wpa_enabled = false; diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 60e88b58039d..f542bb8ccbc8 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -283,6 +283,20 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (ret) goto done; + if (bss_desc) { + u8 config_bands = 0; + + if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band) + == HostCmd_SCAN_RADIO_TYPE_BG) + config_bands = BAND_B | BAND_G | BAND_GN; + else + config_bands = BAND_A | BAND_AN; + + if (!((config_bands | adapter->fw_bands) & + ~adapter->fw_bands)) + adapter->config_bands = config_bands; + } + ret = mwifiex_check_network_compatibility(priv, bss_desc); if (ret) goto done; -- cgit v1.2.3 From 3b86acb8088d0c7c4cddc340a13dec5cef110e30 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:11 -0800 Subject: mwifiex: correct config_bands handling for ibss network BAND_G is implicit when BAND_GN is present. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index e74e1b99419a..cdb11b3964e2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1694,7 +1694,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv, if (cfg80211_get_chandef_type(¶ms->chandef) != NL80211_CHAN_NO_HT) - config_bands |= BAND_GN; + config_bands |= BAND_G | BAND_GN; } else { if (cfg80211_get_chandef_type(¶ms->chandef) == NL80211_CHAN_NO_HT) -- cgit v1.2.3 From 0981c3b24ef664f5611008a6e6d0622fac6d892b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 9 Jan 2013 16:07:48 +0530 Subject: ath9k_htc: Fix memory leak SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Cc: Reported-by: Larry Finger Signed-off-by: Sujith Manoharan Tested-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index 4a9570dfba72..aac4a406a513 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -344,6 +344,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, endpoint->ep_callbacks.tx(endpoint->ep_callbacks.priv, skb, htc_hdr->endpoint_id, txok); + } else { + kfree_skb(skb); } } -- cgit v1.2.3 From a3dc48e82bb146ef11cf75676c8410c1df29b0c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:52 +0100 Subject: ath9k: do not link receive buffers during flush On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a938bf..01c3ba47a5b9 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -744,6 +744,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } + list_del(&bf->list); if (!bf->bf_mpdu) return bf; @@ -1254,14 +1255,15 @@ requeue_drop_frag: sc->rx.frag = NULL; } requeue: + list_add_tail(&bf->list, &sc->rx.rxbuf); + if (flush) + continue; + if (edma) { - list_add_tail(&bf->list, &sc->rx.rxbuf); ath_rx_edma_buf_link(sc, qtype); } else { - list_move_tail(&bf->list, &sc->rx.rxbuf); ath_rx_buf_link(sc, bf); - if (!flush) - ath9k_hw_rxena(ah); + ath9k_hw_rxena(ah); } } while (1); -- cgit v1.2.3 From 1adb2e2b5f85023d17eb4f95386a57029df27c88 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:53 +0100 Subject: ath9k: fix double-free bug on beacon generate failure When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd801a3..4eb269d6b974 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -147,6 +147,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(skb); bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; } skb = ieee80211_beacon_get(hw, vif); -- cgit v1.2.3 From 3adcf20afb585993ffee24de36d1975f6b26b120 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:54 +0100 Subject: ath9k: remove the WARN_ON that triggers if generating a beacon fails During teardown, mac80211 will not return a new beacon. This is normal and handled properly in the driver, so there's no need to spam the user with a kernel warning here. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 4eb269d6b974..2ca355e94da6 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -360,7 +360,6 @@ void ath9k_beacon_tasklet(unsigned long data) return; bf = ath9k_beacon_generate(sc->hw, vif); - WARN_ON(!bf); if (sc->beacon.bmisscnt != 0) { ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n", -- cgit v1.2.3 From 7fc00a3054b70b1794c2d64db703eb467ad0365c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:55 +0100 Subject: ath9k: add a better fix for the rx tasklet vs rx flush race Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug.c | 1 - drivers/net/wireless/ath/ath9k/debug.h | 2 -- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ drivers/net/wireless/ath/ath9k/recv.c | 15 --------------- 5 files changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a19efda..7335e9ef0249 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -646,7 +646,6 @@ void ath_ant_comb_update(struct ath_softc *sc); enum sc_op_flags { SC_OP_INVALID, SC_OP_BEACONS, - SC_OP_RXFLUSH, SC_OP_ANI_RUN, SC_OP_PRIM_STA_VIF, SC_OP_HW_RESET, diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9edc2401..e585fc827c50 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -861,7 +861,6 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, RXS_ERR("RX-LENGTH-ERR", rx_len_err); RXS_ERR("RX-OOM-ERR", rx_oom_err); RXS_ERR("RX-RATE-ERR", rx_rate_err); - RXS_ERR("RX-DROP-RXFLUSH", rx_drop_rxflush); RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err); PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b46411e..6df2ab62dcb7 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -216,7 +216,6 @@ struct ath_tx_stats { * @rx_oom_err: No. of frames dropped due to OOM issues. * @rx_rate_err: No. of frames dropped due to rate errors. * @rx_too_many_frags_err: Frames dropped due to too-many-frags received. - * @rx_drop_rxflush: No. of frames dropped due to RX-FLUSH. * @rx_beacons: No. of beacons received. * @rx_frags: No. of rx-fragements received. */ @@ -235,7 +234,6 @@ struct ath_rx_stats { u32 rx_oom_err; u32 rx_rate_err; u32 rx_too_many_frags_err; - u32 rx_drop_rxflush; u32 rx_beacons; u32 rx_frags; }; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9af1528..d3cf01ec2d15 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,6 +196,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); + tasklet_disable(&sc->intr_tq); + if (!ath_stoprecv(sc)) ret = false; @@ -210,6 +212,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath_flushrecv(sc); } + tasklet_enable(&sc->intr_tq); + return ret; } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 01c3ba47a5b9..6b83b3bbfe8c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -286,7 +286,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) spin_lock_init(&sc->sc_pcu_lock); spin_lock_init(&sc->rx.rxbuflock); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -501,11 +500,9 @@ bool ath_stoprecv(struct ath_softc *sc) void ath_flushrecv(struct ath_softc *sc) { - set_bit(SC_OP_RXFLUSH, &sc->sc_flags); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_rx_tasklet(sc, 1, true); ath_rx_tasklet(sc, 1, false); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); } static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) @@ -1067,9 +1064,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) do { bool decrypt_error = false; - /* If handling rx interrupt and flush is in progress => exit */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) - break; memset(&rs, 0, sizeof(rs)); if (edma) @@ -1112,15 +1106,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_debug_stat_rx(sc, &rs); - /* - * If we're asked to flush receive queue, directly - * chain it back at the queue without processing it. - */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags)) { - RX_STAT_INC(rx_drop_rxflush); - goto requeue_drop_frag; - } - memset(rxs, 0, sizeof(struct ieee80211_rx_status)); rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; -- cgit v1.2.3 From 4b883f021b9ccf2df3d14425e6e610281fb6a35e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:56 +0100 Subject: ath9k: fix rx flush handling Right now the rx flush is not doing anything useful on AR9003+, as it only works if the buffers in the rx FIFO have not been purged yet, as is done by ath_stoprecv. To fix this, always call ath_flushrecv from within ath_stoprecv before the FIFO is emptied, but still after the hw receive path has been stopped. This ensures that frames received (and ACKed by the hardware) shortly before a reset will be seen by the software, which should improve A-MPDU session stability. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 16 +++------------- drivers/net/wireless/ath/ath9k/recv.c | 16 +++++++++------- 3 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7335e9ef0249..32b2d5cd9a5a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -328,7 +328,6 @@ struct ath_rx { int ath_startrecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc); -void ath_flushrecv(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc); int ath_rx_init(struct ath_softc *sc, int nbufs); void ath_rx_cleanup(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index d3cf01ec2d15..9844b758f81d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -204,14 +204,6 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!flush) { - if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); - } else { - ath_flushrecv(sc); - } - tasklet_enable(&sc->intr_tq); return ret; @@ -266,7 +258,6 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = NULL; bool fastcc = true; - bool flush = false; int r; __ath_cancel_work(sc); @@ -280,11 +271,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, if (!hchan) { fastcc = false; - flush = true; hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, retry_tx)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -808,7 +798,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, false); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6b83b3bbfe8c..67f58d4bb10e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -472,6 +472,13 @@ start_recv: return 0; } +static void ath_flushrecv(struct ath_softc *sc) +{ + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_rx_tasklet(sc, 1, true); + ath_rx_tasklet(sc, 1, false); +} + bool ath_stoprecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -482,6 +489,8 @@ bool ath_stoprecv(struct ath_softc *sc) ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); + ath_flushrecv(sc); + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_edma_stop_recv(sc); else @@ -498,13 +507,6 @@ bool ath_stoprecv(struct ath_softc *sc) return stopped && !reset; } -void ath_flushrecv(struct ath_softc *sc) -{ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); -} - static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) { /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ -- cgit v1.2.3 From a1fe52801a992e590cdaee2fb47a94bac9b5da90 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 10 Jan 2013 11:20:48 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Cc: stable@vger.kernel.org Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ecbe2ea..0f71d1d4339d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1407,9 +1407,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit v1.2.3 From 463e3ed3eacc8f47866e5d612bd8ee0bcee5e2f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 10:50:15 +0100 Subject: ath9k: remove sc->rx.rxbuflock to fix a deadlock The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/recv.c | 13 ------------- 2 files changed, 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 32b2d5cd9a5a..42794c546a40 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -317,7 +317,6 @@ struct ath_rx { u32 *rxlink; u32 num_pkts; unsigned int rxfilter; - spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; struct ath_buf *rx_bufptr; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 67f58d4bb10e..90752f246970 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -254,8 +254,6 @@ rx_init_fail: static void ath_edma_start_recv(struct ath_softc *sc) { - spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_rxena(sc->sc_ah); ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP, @@ -267,8 +265,6 @@ static void ath_edma_start_recv(struct ath_softc *sc) ath_opmode_init(sc); ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - - spin_unlock_bh(&sc->rx.rxbuflock); } static void ath_edma_stop_recv(struct ath_softc *sc) @@ -285,7 +281,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) int error = 0; spin_lock_init(&sc->sc_pcu_lock); - spin_lock_init(&sc->rx.rxbuflock); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -446,7 +441,6 @@ int ath_startrecv(struct ath_softc *sc) return 0; } - spin_lock_bh(&sc->rx.rxbuflock); if (list_empty(&sc->rx.rxbuf)) goto start_recv; @@ -467,8 +461,6 @@ start_recv: ath_opmode_init(sc); ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - spin_unlock_bh(&sc->rx.rxbuflock); - return 0; } @@ -484,7 +476,6 @@ bool ath_stoprecv(struct ath_softc *sc) struct ath_hw *ah = sc->sc_ah; bool stopped, reset = false; - spin_lock_bh(&sc->rx.rxbuflock); ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); @@ -495,7 +486,6 @@ bool ath_stoprecv(struct ath_softc *sc) ath_edma_stop_recv(sc); else sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.rxbuflock); if (!(ah->ah_flags & AH_UNPLUGGED) && unlikely(!stopped)) { @@ -1059,7 +1049,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) dma_type = DMA_FROM_DEVICE; qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; - spin_lock_bh(&sc->rx.rxbuflock); tsf = ath9k_hw_gettsf64(ah); tsf_lower = tsf & 0xffffffff; @@ -1254,8 +1243,6 @@ requeue: } } while (1); - spin_unlock_bh(&sc->rx.rxbuflock); - if (!(ah->imask & ATH9K_INT_RXEOL)) { ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN); ath9k_hw_set_interrupts(ah); -- cgit v1.2.3 From 4668cce527acb3bd048c5e6c99b157a14b214671 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 16:56:46 +0100 Subject: ath9k: disable the tasklet before taking the PCU lock Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9844b758f81d..3796e65c26f1 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,16 +196,12 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - tasklet_disable(&sc->intr_tq); - if (!ath_stoprecv(sc)) ret = false; if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - tasklet_enable(&sc->intr_tq); - return ret; } @@ -262,6 +258,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, __ath_cancel_work(sc); + tasklet_disable(&sc->intr_tq); spin_lock_bh(&sc->sc_pcu_lock); if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) { @@ -296,6 +293,8 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, out: spin_unlock_bh(&sc->sc_pcu_lock); + tasklet_enable(&sc->intr_tq); + return r; } -- cgit v1.2.3