From cd8c50532a42065339be1fe550e66b89d7ffd14f Mon Sep 17 00:00:00 2001 From: Rahul Bedarkar Date: Thu, 2 Jan 2014 19:29:24 +0530 Subject: USB: serial: correct spelling mistakes in comments Signed-off-by: Rahul Bedarkar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/aircable.c | 10 +++++----- drivers/usb/serial/ark3116.c | 4 ++-- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/garmin_gps.c | 4 ++-- drivers/usb/serial/iuu_phoenix.c | 2 +- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/serial/keyspan_usa26msg.h | 2 +- drivers/usb/serial/mos7720.c | 8 ++++---- drivers/usb/serial/opticon.c | 4 ++-- drivers/usb/serial/visor.h | 2 +- drivers/usb/serial/zte_ev.c | 20 ++++++++++---------- 12 files changed, 31 insertions(+), 31 deletions(-) diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 6e320cec397d..80a9845cd93f 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -10,9 +10,9 @@ * * The device works as an standard CDC device, it has 2 interfaces, the first * one is for firmware access and the second is the serial one. - * The protocol is very simply, there are two posibilities reading or writing. + * The protocol is very simply, there are two possibilities reading or writing. * When writing the first urb must have a Header that starts with 0x20 0x29 the - * next two bytes must say how much data will be sended. + * next two bytes must say how much data will be sent. * When reading the process is almost equal except that the header starts with * 0x00 0x20. * @@ -31,15 +31,15 @@ * * The driver registers himself with the USB-serial core and the USB Core. I had * to implement a probe function against USB-serial, because other way, the - * driver was attaching himself to both interfaces. I have tryed with different + * driver was attaching himself to both interfaces. I have tried with different * configurations of usb_serial_driver with out exit, only the probe function * could handle this correctly. * * I have taken some info from a Greg Kroah-Hartman article: * http://www.linuxjournal.com/article/6573 * And from Linux Device Driver Kit CD, which is a great work, the authors taken - * the work to recompile lots of information an knowladge in drivers development - * and made it all avaible inside a cd. + * the work to recompile lots of information an knowledge in drivers development + * and made it all available inside a cd. * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/ * */ diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index bc77e955cbef..9d909266babc 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -71,7 +71,7 @@ struct ark3116_private { __u32 lcr; /* line control register value */ __u32 hcr; /* handshake control register (0x8) * value */ - __u32 mcr; /* modem contol register value */ + __u32 mcr; /* modem control register value */ /* protects the status values below */ spinlock_t status_lock; @@ -609,7 +609,7 @@ static void ark3116_read_int_callback(struct urb *urb) } -/* Data comes in via the bulk (data) URB, erors/interrupts via the int URB. +/* Data comes in via the bulk (data) URB, errors/interrupts via the int URB. * This means that we cannot be sure which data byte has an associated error * condition, so we report an error for all data in the next bulk read. * diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 84217e78ded4..336a10566f90 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -18,7 +18,7 @@ * driver * * TODO: - * -- Add true modem contol line query capability. Currently we track the + * -- Add true modem control line query capability. Currently we track the * states reported by the interrupt and the states we request. * -- Add support for flush commands */ diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 6e1b69d0f5f5..1a71363b95bd 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -285,7 +285,7 @@ static void cyberjack_read_int_callback(struct urb *urb) goto resubmit; } - /* "+=" is probably more fault tollerant than "=" */ + /* "+=" is probably more fault tolerant than "=" */ priv->rdtodo += size; dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo); diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index f4ee74da44e8..fac8f09640a4 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -275,7 +275,7 @@ static int pkt_add(struct garmin_data *garmin_data_p, unsigned long flags; struct garmin_packet *pkt; - /* process only packets containg data ... */ + /* process only packets containing data ... */ if (data_length) { pkt = kmalloc(sizeof(struct garmin_packet)+data_length, GFP_ATOMIC); @@ -1144,7 +1144,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p, unsigned long flags; if (garmin_data_p->flags & FLAGS_DROP_DATA) { - /* abort-transfer cmd is actice */ + /* abort-transfer cmd is active */ dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__); } else if (garmin_data_p->state != STATE_DISCONNECTED && garmin_data_p->state != STATE_RESET) { diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 57c439a24b5a..fa0c3c14f8df 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -770,7 +770,7 @@ uart_enable_failed: return status; } -/* Diables the IUU UART (a.k.a. the Phoenix voiderface) */ +/* Disables the IUU UART (a.k.a. the Phoenix voiderface) */ static int iuu_uart_off(struct usb_serial_port *port) { int status; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 6125fce7d0f6..b0f6f5eda2cd 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -165,7 +165,7 @@ static void keyspan_set_termios(struct tty_struct *tty, if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ - /* FIXME - calcuate exact rate from divisor ? */ + /* FIXME - calculate exact rate from divisor ? */ p_priv->baud = baud_rate; } else baud_rate = tty_termios_baud_rate(old_termios); diff --git a/drivers/usb/serial/keyspan_usa26msg.h b/drivers/usb/serial/keyspan_usa26msg.h index 3808727db65a..09e21e84fc4e 100644 --- a/drivers/usb/serial/keyspan_usa26msg.h +++ b/drivers/usb/serial/keyspan_usa26msg.h @@ -62,7 +62,7 @@ or: (b) 0x80 bit set - indiates that the bytes following alternate data and + indicates that the bytes following alternate data and status bytes: STAT DATA STAT DATA STAT DATA STAT DATA ... diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index ee68191e87c6..5646fa587ffd 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1,6 +1,6 @@ /* * mos7720.c - * Controls the Moschip 7720 usb to dual port serial convertor + * Controls the Moschip 7720 usb to dual port serial converter * * Copyright 2006 Moschip Semiconductor Tech. Ltd. * @@ -46,7 +46,7 @@ #define MOS_WRITE 0x0E #define MOS_READ 0x0D -/* Interrupt Rotinue Defines */ +/* Interrupt Routines Defines */ #define SERIAL_IIR_RLS 0x06 #define SERIAL_IIR_RDA 0x04 #define SERIAL_IIR_CTI 0x0c @@ -438,7 +438,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, * not called the release function yet because someone has a serial port open. * The shared release_lock prevents the first, and the mutex and disconnected * flag maintained by usbserial covers the second. We also use the msg_pending - * flag to ensure that all synchronous usb messgage calls have completed before + * flag to ensure that all synchronous usb message calls have completed before * our release function can return. */ static int parport_prologue(struct parport *pp) @@ -469,7 +469,7 @@ static int parport_prologue(struct parport *pp) } /* - * This is the the common bottom part of all parallel port functions that send + * This is the common bottom part of all parallel port functions that send * synchronous messages to the device. */ static inline void parport_epilogue(struct parport *pp) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 90c77b20c883..e403bda0af4d 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -139,7 +139,7 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) /* Clear RTS line */ send_control_msg(port, CONTROL_RTS, 0); - /* clear the halt status of the enpoint */ + /* clear the halt status of the endpoint */ usb_clear_halt(port->serial->dev, port->read_urb->pipe); res = usb_serial_generic_open(tty, port); @@ -214,7 +214,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, usb_serial_debug_data(&port->dev, __func__, count, buffer); - /* The conncected devices do not have a bulk write endpoint, + /* The connected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); if (!dr) { diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index 88db4d06aefb..4c456dd69ce5 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -136,7 +136,7 @@ struct visor_connection_info { * connections.end_point_info is non-zero. If value is 0, then * connections.port contains the endpoint number, which is the same for in * and out. - * @port_function_id: contains the creator id of the applicaton that opened + * @port_function_id: contains the creator id of the application that opened * this connection. * @port: contains the in/out endpoint number. Is 0 if in and out endpoint * numbers are different. diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index eae2c873b39f..288d26565c59 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -53,7 +53,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); - /* send 2st cmd and recieve data */ + /* send 2st cmd and receive data */ /* * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5) * 16.0 DI 00 96 00 00 00 00 08 @@ -65,7 +65,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 3 cmd */ + /* send 3rd cmd */ /* * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0 @@ -84,7 +84,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 4 cmd */ + /* send 4th cmd */ /* * 16.0 CTL 21 22 03 00 00 00 00 00 */ @@ -95,7 +95,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); - /* send 5 cmd */ + /* send 5th cmd */ /* * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 * 16.0 DI 80 25 00 00 00 00 08 @@ -107,7 +107,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 6 cmd */ + /* send 6th cmd */ /* * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0 * 16.0 DO 80 25 00 00 00 00 08 @@ -195,7 +195,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 4 cmd */ + /* send 4th cmd */ /* * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0 * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0 @@ -214,7 +214,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 5 cmd */ + /* send 5th cmd */ /* * 16.0 CTL 21 22 03 00 00 00 00 00 */ @@ -225,7 +225,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); - /* send 6 cmd */ + /* send 6th cmd */ /* * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0 * 16.0 DI 00 c2 01 00 00 00 08 @@ -237,7 +237,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 7 cmd */ + /* send 7th cmd */ /* * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0 * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0 @@ -256,7 +256,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); - /* send 8 cmd */ + /* send 8th cmd */ /* * 16.0 CTL 21 22 03 00 00 00 00 00 */ -- cgit v1.2.3