From bbd7b275dbc24cc712b6bbc0f5211e9a9791dd89 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 7 May 2013 01:36:08 +0200 Subject: pinctrl: dove: add PMU functions to pinctrl Dove power management unit can mux some special functions to mpp0-15. This patch adds support to set/get the current PMU function mapped to the corresponding mpp pins. The device tree documentation is also updated accordingly. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: Linus Walleij --- .../bindings/pinctrl/marvell,dove-pinctrl.txt | 49 +++++++++++++++------- 1 file changed, 33 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt index a648aaad6110..50ec3512a292 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt @@ -10,29 +10,31 @@ Required properties: Available mpp pins/groups and functions: Note: brackets (x) are not part of the mpp name for marvell,function and given only for more detailed description in this document. +Note: pmu* also allows for Power Management functions listed below name pins functions ================================================================================ -mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm) -mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm) +mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu* +mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu* mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt), - uart1(rts) + uart1(rts), pmu* mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act), - uart1(cts), lcd-spi(cs1) -mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso) -mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs) -mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi) -mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck) -mpp8 8 gpio, pmu, watchdog(rstout) -mpp9 9 gpio, pmu, pex1(clkreq) -mpp10 10 gpio, pmu, ssp(sclk) + uart1(cts), lcd-spi(cs1), pmu* +mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso), pmu* +mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs), pmu* +mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi), pmu* +mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck), pmu* +mpp8 8 gpio, pmu, watchdog(rstout), pmu* +mpp9 9 gpio, pmu, pex1(clkreq), pmu* +mpp10 10 gpio, pmu, ssp(sclk), pmu* mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl), - sdio1(ledctrl), pex0(clkreq) -mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act) + sdio1(ledctrl), pex0(clkreq), pmu* +mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), + sata(act), pmu* mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp), - ssp(extclk) -mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd) -mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm) + ssp(extclk), pmu* +mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu* +mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu* mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1) mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda), ac97-1(sysclko) @@ -57,6 +59,21 @@ mpp_nand 64-71 gpo, nand audio0 - i2s, ac97 twsi - none, opt1, opt2, opt3 +Power Management functions (pmu*): +pmu-nc Pin not driven by any PM function +pmu-low Pin driven low (0) +pmu-high Pin driven high (1) +pmic(sdi) Pin is used for PMIC SDI +cpu-pwr-down Pin is used for CPU_PWRDWN +standby-pwr-down Pin is used for STBY_PWRDWN +core-pwr-good Pin is used for CORE_PWR_GOOD (Pins 0-7 only) +cpu-pwr-good Pin is used for CPU_PWR_GOOD (Pins 8-15 only) +bat-fault Pin is used for BATTERY_FAULT +ext0-wakeup Pin is used for EXT0_WU +ext1-wakeup Pin is used for EXT0_WU +ext2-wakeup Pin is used for EXT0_WU +pmu-blink Pin is used for blink function + Notes: * group "mpp_audio1" allows the following functions and gpio pins: - gpio : gpio on pins 52-57 -- cgit v1.2.3 From 7bbc87b801fcaa817d828fdaa0ca8c6d223a1347 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 28 May 2013 10:31:48 +0100 Subject: Documentation/pinctrl.txt: fix typo "with with" Fix typo in "communicate directly with with the pinctrl subsystem". Signed-off-by: James Hogan Cc: Linus Walleij Acked-by: Rob Landley Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 447fd4cd54ec..f6e664b6e36b 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -1226,8 +1226,8 @@ setting up the config and muxing for the pins right before the device is probing, nevertheless orthogonal to the GPIO subsystem. But there are also situations where it makes sense for the GPIO subsystem -to communicate directly with with the pinctrl subsystem, using the latter -as a back-end. This is when the GPIO driver may call out to the functions +to communicate directly with the pinctrl subsystem, using the latter as a +back-end. This is when the GPIO driver may call out to the functions described in the section "Pin control interaction with the GPIO subsystem" above. This only involves per-pin multiplexing, and will be completely hidden behind the gpio_*() function namespace. In this case, the driver -- cgit v1.2.3 From 78bafc66180d42f972b443b0b573a1b6ff9aa522 Mon Sep 17 00:00:00 2001 From: Jingchang Lu Date: Tue, 28 May 2013 17:32:08 +0800 Subject: pinctrl: add VF610 pinctrl driver Adds Freescale Vybrid VF610 pin controller driver to IMX common pinctrl driver framework. Signed-off-by: Jingchang Lu Acked-by: Shawn Guo Signed-off-by: Linus Walleij --- .../bindings/pinctrl/fsl,vf610-pinctrl.txt | 41 +++ drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-vf610.c | 338 +++++++++++++++++++++ 4 files changed, 388 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-vf610.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt new file mode 100644 index 000000000000..ddcdeb697c29 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt @@ -0,0 +1,41 @@ +Freescale Vybrid VF610 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,vf610-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = , PIN_FUNC_ID is + a pin working on a specific function, CONFIG is the pad setting value + such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610 + datasheet for the valid pad config settings. + +CONFIG bits definition: +PAD_CTL_SPEED_LOW (1 << 12) +PAD_CTL_SPEED_MED (2 << 12) +PAD_CTL_SPEED_HIGH (3 << 12) +PAD_CTL_SRE_FAST (1 << 11) +PAD_CTL_SRE_SLOW (0 << 11) +PAD_CTL_ODE (1 << 10) +PAD_CTL_HYS (1 << 9) +PAD_CTL_DSE_DISABLE (0 << 6) +PAD_CTL_DSE_150ohm (1 << 6) +PAD_CTL_DSE_75ohm (2 << 6) +PAD_CTL_DSE_50ohm (3 << 6) +PAD_CTL_DSE_37ohm (4 << 6) +PAD_CTL_DSE_30ohm (5 << 6) +PAD_CTL_DSE_25ohm (6 << 6) +PAD_CTL_DSE_20ohm (7 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_PKE (1 << 3) +PAD_CTL_PUE (1 << 2) +PAD_CTL_OBE_ENABLE (1 << 1) +PAD_CTL_IBE_ENABLE (1 << 0) +PAD_CTL_OBE_IBE_ENABLE (3 << 0) + +Please refer to vf610-pinfunc.h in device tree source folder +for all available PIN_FUNC_ID for Vybrid VF610. diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8f6692438149..47cb923cd2df 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -108,6 +108,14 @@ config PINCTRL_IMX6SL help Say Y here to enable the imx6sl pinctrl driver +config PINCTRL_VF610 + bool "Freescale Vybrid VF610 pinctrl driver" + depends on OF + depends on SOC_VF610 + select PINCTRL_IMX + help + Say Y here to enable the Freescale Vybrid VF610 pinctrl driver + config PINCTRL_LANTIQ bool depends on LANTIQ diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 0348c0f8856d..08f2b3e02d42 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o +obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ diff --git a/drivers/pinctrl/pinctrl-vf610.c b/drivers/pinctrl/pinctrl-vf610.c new file mode 100644 index 000000000000..68a970b1dbcf --- /dev/null +++ b/drivers/pinctrl/pinctrl-vf610.c @@ -0,0 +1,338 @@ +/* + * VF610 pinctrl driver based on imx pinmux and pinconf core + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "pinctrl-imx.h" + +enum vf610_pads { + VF610_PAD_PTA6 = 0, + VF610_PAD_PTA8 = 1, + VF610_PAD_PTA9 = 2, + VF610_PAD_PTA10 = 3, + VF610_PAD_PTA11 = 4, + VF610_PAD_PTA12 = 5, + VF610_PAD_PTA16 = 6, + VF610_PAD_PTA17 = 7, + VF610_PAD_PTA18 = 8, + VF610_PAD_PTA19 = 9, + VF610_PAD_PTA20 = 10, + VF610_PAD_PTA21 = 11, + VF610_PAD_PTA22 = 12, + VF610_PAD_PTA23 = 13, + VF610_PAD_PTA24 = 14, + VF610_PAD_PTA25 = 15, + VF610_PAD_PTA26 = 16, + VF610_PAD_PTA27 = 17, + VF610_PAD_PTA28 = 18, + VF610_PAD_PTA29 = 19, + VF610_PAD_PTA30 = 20, + VF610_PAD_PTA31 = 21, + VF610_PAD_PTB0 = 22, + VF610_PAD_PTB1 = 23, + VF610_PAD_PTB2 = 24, + VF610_PAD_PTB3 = 25, + VF610_PAD_PTB4 = 26, + VF610_PAD_PTB5 = 27, + VF610_PAD_PTB6 = 28, + VF610_PAD_PTB7 = 29, + VF610_PAD_PTB8 = 30, + VF610_PAD_PTB9 = 31, + VF610_PAD_PTB10 = 32, + VF610_PAD_PTB11 = 33, + VF610_PAD_PTB12 = 34, + VF610_PAD_PTB13 = 35, + VF610_PAD_PTB14 = 36, + VF610_PAD_PTB15 = 37, + VF610_PAD_PTB16 = 38, + VF610_PAD_PTB17 = 39, + VF610_PAD_PTB18 = 40, + VF610_PAD_PTB19 = 41, + VF610_PAD_PTB20 = 42, + VF610_PAD_PTB21 = 43, + VF610_PAD_PTB22 = 44, + VF610_PAD_PTC0 = 45, + VF610_PAD_PTC1 = 46, + VF610_PAD_PTC2 = 47, + VF610_PAD_PTC3 = 48, + VF610_PAD_PTC4 = 49, + VF610_PAD_PTC5 = 50, + VF610_PAD_PTC6 = 51, + VF610_PAD_PTC7 = 52, + VF610_PAD_PTC8 = 53, + VF610_PAD_PTC9 = 54, + VF610_PAD_PTC10 = 55, + VF610_PAD_PTC11 = 56, + VF610_PAD_PTC12 = 57, + VF610_PAD_PTC13 = 58, + VF610_PAD_PTC14 = 59, + VF610_PAD_PTC15 = 60, + VF610_PAD_PTC16 = 61, + VF610_PAD_PTC17 = 62, + VF610_PAD_PTD31 = 63, + VF610_PAD_PTD30 = 64, + VF610_PAD_PTD29 = 65, + VF610_PAD_PTD28 = 66, + VF610_PAD_PTD27 = 67, + VF610_PAD_PTD26 = 68, + VF610_PAD_PTD25 = 69, + VF610_PAD_PTD24 = 70, + VF610_PAD_PTD23 = 71, + VF610_PAD_PTD22 = 72, + VF610_PAD_PTD21 = 73, + VF610_PAD_PTD20 = 74, + VF610_PAD_PTD19 = 75, + VF610_PAD_PTD18 = 76, + VF610_PAD_PTD17 = 77, + VF610_PAD_PTD16 = 78, + VF610_PAD_PTD0 = 79, + VF610_PAD_PTD1 = 80, + VF610_PAD_PTD2 = 81, + VF610_PAD_PTD3 = 82, + VF610_PAD_PTD4 = 83, + VF610_PAD_PTD5 = 84, + VF610_PAD_PTD6 = 85, + VF610_PAD_PTD7 = 86, + VF610_PAD_PTD8 = 87, + VF610_PAD_PTD9 = 88, + VF610_PAD_PTD10 = 89, + VF610_PAD_PTD11 = 90, + VF610_PAD_PTD12 = 91, + VF610_PAD_PTD13 = 92, + VF610_PAD_PTB23 = 93, + VF610_PAD_PTB24 = 94, + VF610_PAD_PTB25 = 95, + VF610_PAD_PTB26 = 96, + VF610_PAD_PTB27 = 97, + VF610_PAD_PTB28 = 98, + VF610_PAD_PTC26 = 99, + VF610_PAD_PTC27 = 100, + VF610_PAD_PTC28 = 101, + VF610_PAD_PTC29 = 102, + VF610_PAD_PTC30 = 103, + VF610_PAD_PTC31 = 104, + VF610_PAD_PTE0 = 105, + VF610_PAD_PTE1 = 106, + VF610_PAD_PTE2 = 107, + VF610_PAD_PTE3 = 108, + VF610_PAD_PTE4 = 109, + VF610_PAD_PTE5 = 110, + VF610_PAD_PTE6 = 111, + VF610_PAD_PTE7 = 112, + VF610_PAD_PTE8 = 113, + VF610_PAD_PTE9 = 114, + VF610_PAD_PTE10 = 115, + VF610_PAD_PTE11 = 116, + VF610_PAD_PTE12 = 117, + VF610_PAD_PTE13 = 118, + VF610_PAD_PTE14 = 119, + VF610_PAD_PTE15 = 120, + VF610_PAD_PTE16 = 121, + VF610_PAD_PTE17 = 122, + VF610_PAD_PTE18 = 123, + VF610_PAD_PTE19 = 124, + VF610_PAD_PTE20 = 125, + VF610_PAD_PTE21 = 126, + VF610_PAD_PTE22 = 127, + VF610_PAD_PTE23 = 128, + VF610_PAD_PTE24 = 129, + VF610_PAD_PTE25 = 130, + VF610_PAD_PTE26 = 131, + VF610_PAD_PTE27 = 132, + VF610_PAD_PTE28 = 133, + VF610_PAD_PTA7 = 134, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = { + IMX_PINCTRL_PIN(VF610_PAD_PTA6), + IMX_PINCTRL_PIN(VF610_PAD_PTA8), + IMX_PINCTRL_PIN(VF610_PAD_PTA9), + IMX_PINCTRL_PIN(VF610_PAD_PTA10), + IMX_PINCTRL_PIN(VF610_PAD_PTA11), + IMX_PINCTRL_PIN(VF610_PAD_PTA12), + IMX_PINCTRL_PIN(VF610_PAD_PTA16), + IMX_PINCTRL_PIN(VF610_PAD_PTA17), + IMX_PINCTRL_PIN(VF610_PAD_PTA18), + IMX_PINCTRL_PIN(VF610_PAD_PTA19), + IMX_PINCTRL_PIN(VF610_PAD_PTA20), + IMX_PINCTRL_PIN(VF610_PAD_PTA21), + IMX_PINCTRL_PIN(VF610_PAD_PTA22), + IMX_PINCTRL_PIN(VF610_PAD_PTA23), + IMX_PINCTRL_PIN(VF610_PAD_PTA24), + IMX_PINCTRL_PIN(VF610_PAD_PTA25), + IMX_PINCTRL_PIN(VF610_PAD_PTA26), + IMX_PINCTRL_PIN(VF610_PAD_PTA27), + IMX_PINCTRL_PIN(VF610_PAD_PTA28), + IMX_PINCTRL_PIN(VF610_PAD_PTA29), + IMX_PINCTRL_PIN(VF610_PAD_PTA30), + IMX_PINCTRL_PIN(VF610_PAD_PTA31), + IMX_PINCTRL_PIN(VF610_PAD_PTB0), + IMX_PINCTRL_PIN(VF610_PAD_PTB1), + IMX_PINCTRL_PIN(VF610_PAD_PTB2), + IMX_PINCTRL_PIN(VF610_PAD_PTB3), + IMX_PINCTRL_PIN(VF610_PAD_PTB4), + IMX_PINCTRL_PIN(VF610_PAD_PTB5), + IMX_PINCTRL_PIN(VF610_PAD_PTB6), + IMX_PINCTRL_PIN(VF610_PAD_PTB7), + IMX_PINCTRL_PIN(VF610_PAD_PTB8), + IMX_PINCTRL_PIN(VF610_PAD_PTB9), + IMX_PINCTRL_PIN(VF610_PAD_PTB10), + IMX_PINCTRL_PIN(VF610_PAD_PTB11), + IMX_PINCTRL_PIN(VF610_PAD_PTB12), + IMX_PINCTRL_PIN(VF610_PAD_PTB13), + IMX_PINCTRL_PIN(VF610_PAD_PTB14), + IMX_PINCTRL_PIN(VF610_PAD_PTB15), + IMX_PINCTRL_PIN(VF610_PAD_PTB16), + IMX_PINCTRL_PIN(VF610_PAD_PTB17), + IMX_PINCTRL_PIN(VF610_PAD_PTB18), + IMX_PINCTRL_PIN(VF610_PAD_PTB19), + IMX_PINCTRL_PIN(VF610_PAD_PTB20), + IMX_PINCTRL_PIN(VF610_PAD_PTB21), + IMX_PINCTRL_PIN(VF610_PAD_PTB22), + IMX_PINCTRL_PIN(VF610_PAD_PTC0), + IMX_PINCTRL_PIN(VF610_PAD_PTC1), + IMX_PINCTRL_PIN(VF610_PAD_PTC2), + IMX_PINCTRL_PIN(VF610_PAD_PTC3), + IMX_PINCTRL_PIN(VF610_PAD_PTC4), + IMX_PINCTRL_PIN(VF610_PAD_PTC5), + IMX_PINCTRL_PIN(VF610_PAD_PTC6), + IMX_PINCTRL_PIN(VF610_PAD_PTC7), + IMX_PINCTRL_PIN(VF610_PAD_PTC8), + IMX_PINCTRL_PIN(VF610_PAD_PTC9), + IMX_PINCTRL_PIN(VF610_PAD_PTC10), + IMX_PINCTRL_PIN(VF610_PAD_PTC11), + IMX_PINCTRL_PIN(VF610_PAD_PTC12), + IMX_PINCTRL_PIN(VF610_PAD_PTC13), + IMX_PINCTRL_PIN(VF610_PAD_PTC14), + IMX_PINCTRL_PIN(VF610_PAD_PTC15), + IMX_PINCTRL_PIN(VF610_PAD_PTC16), + IMX_PINCTRL_PIN(VF610_PAD_PTC17), + IMX_PINCTRL_PIN(VF610_PAD_PTD31), + IMX_PINCTRL_PIN(VF610_PAD_PTD30), + IMX_PINCTRL_PIN(VF610_PAD_PTD29), + IMX_PINCTRL_PIN(VF610_PAD_PTD28), + IMX_PINCTRL_PIN(VF610_PAD_PTD27), + IMX_PINCTRL_PIN(VF610_PAD_PTD26), + IMX_PINCTRL_PIN(VF610_PAD_PTD25), + IMX_PINCTRL_PIN(VF610_PAD_PTD24), + IMX_PINCTRL_PIN(VF610_PAD_PTD23), + IMX_PINCTRL_PIN(VF610_PAD_PTD22), + IMX_PINCTRL_PIN(VF610_PAD_PTD21), + IMX_PINCTRL_PIN(VF610_PAD_PTD20), + IMX_PINCTRL_PIN(VF610_PAD_PTD19), + IMX_PINCTRL_PIN(VF610_PAD_PTD18), + IMX_PINCTRL_PIN(VF610_PAD_PTD17), + IMX_PINCTRL_PIN(VF610_PAD_PTD16), + IMX_PINCTRL_PIN(VF610_PAD_PTD0), + IMX_PINCTRL_PIN(VF610_PAD_PTD1), + IMX_PINCTRL_PIN(VF610_PAD_PTD2), + IMX_PINCTRL_PIN(VF610_PAD_PTD3), + IMX_PINCTRL_PIN(VF610_PAD_PTD4), + IMX_PINCTRL_PIN(VF610_PAD_PTD5), + IMX_PINCTRL_PIN(VF610_PAD_PTD6), + IMX_PINCTRL_PIN(VF610_PAD_PTD7), + IMX_PINCTRL_PIN(VF610_PAD_PTD8), + IMX_PINCTRL_PIN(VF610_PAD_PTD9), + IMX_PINCTRL_PIN(VF610_PAD_PTD10), + IMX_PINCTRL_PIN(VF610_PAD_PTD11), + IMX_PINCTRL_PIN(VF610_PAD_PTD12), + IMX_PINCTRL_PIN(VF610_PAD_PTD13), + IMX_PINCTRL_PIN(VF610_PAD_PTB23), + IMX_PINCTRL_PIN(VF610_PAD_PTB24), + IMX_PINCTRL_PIN(VF610_PAD_PTB25), + IMX_PINCTRL_PIN(VF610_PAD_PTB26), + IMX_PINCTRL_PIN(VF610_PAD_PTB27), + IMX_PINCTRL_PIN(VF610_PAD_PTB28), + IMX_PINCTRL_PIN(VF610_PAD_PTC26), + IMX_PINCTRL_PIN(VF610_PAD_PTC27), + IMX_PINCTRL_PIN(VF610_PAD_PTC28), + IMX_PINCTRL_PIN(VF610_PAD_PTC29), + IMX_PINCTRL_PIN(VF610_PAD_PTC30), + IMX_PINCTRL_PIN(VF610_PAD_PTC31), + IMX_PINCTRL_PIN(VF610_PAD_PTE0), + IMX_PINCTRL_PIN(VF610_PAD_PTE1), + IMX_PINCTRL_PIN(VF610_PAD_PTE2), + IMX_PINCTRL_PIN(VF610_PAD_PTE3), + IMX_PINCTRL_PIN(VF610_PAD_PTE4), + IMX_PINCTRL_PIN(VF610_PAD_PTE5), + IMX_PINCTRL_PIN(VF610_PAD_PTE6), + IMX_PINCTRL_PIN(VF610_PAD_PTE7), + IMX_PINCTRL_PIN(VF610_PAD_PTE8), + IMX_PINCTRL_PIN(VF610_PAD_PTE9), + IMX_PINCTRL_PIN(VF610_PAD_PTE10), + IMX_PINCTRL_PIN(VF610_PAD_PTE11), + IMX_PINCTRL_PIN(VF610_PAD_PTE12), + IMX_PINCTRL_PIN(VF610_PAD_PTE13), + IMX_PINCTRL_PIN(VF610_PAD_PTE14), + IMX_PINCTRL_PIN(VF610_PAD_PTE15), + IMX_PINCTRL_PIN(VF610_PAD_PTE16), + IMX_PINCTRL_PIN(VF610_PAD_PTE17), + IMX_PINCTRL_PIN(VF610_PAD_PTE18), + IMX_PINCTRL_PIN(VF610_PAD_PTE19), + IMX_PINCTRL_PIN(VF610_PAD_PTE20), + IMX_PINCTRL_PIN(VF610_PAD_PTE21), + IMX_PINCTRL_PIN(VF610_PAD_PTE22), + IMX_PINCTRL_PIN(VF610_PAD_PTE23), + IMX_PINCTRL_PIN(VF610_PAD_PTE24), + IMX_PINCTRL_PIN(VF610_PAD_PTE25), + IMX_PINCTRL_PIN(VF610_PAD_PTE26), + IMX_PINCTRL_PIN(VF610_PAD_PTE27), + IMX_PINCTRL_PIN(VF610_PAD_PTE28), + IMX_PINCTRL_PIN(VF610_PAD_PTA7), +}; + +static struct imx_pinctrl_soc_info vf610_pinctrl_info = { + .pins = vf610_pinctrl_pads, + .npins = ARRAY_SIZE(vf610_pinctrl_pads), + .flags = ZERO_OFFSET_VALID | SHARE_MUX_CONF_REG, +}; + +static struct of_device_id vf610_pinctrl_of_match[] = { + { .compatible = "fsl,vf610-iomuxc", }, + { /* sentinel */ } +}; + +static int vf610_pinctrl_probe(struct platform_device *pdev) +{ + return imx_pinctrl_probe(pdev, &vf610_pinctrl_info); +} + +static struct platform_driver vf610_pinctrl_driver = { + .driver = { + .name = "vf610-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(vf610_pinctrl_of_match), + }, + .probe = vf610_pinctrl_probe, + .remove = imx_pinctrl_remove, +}; + +static int __init vf610_pinctrl_init(void) +{ + return platform_driver_register(&vf610_pinctrl_driver); +} +arch_initcall(vf610_pinctrl_init); + +static void __exit vf610_pinctrl_exit(void) +{ + platform_driver_unregister(&vf610_pinctrl_driver); +} +module_exit(vf610_pinctrl_exit); + +MODULE_DESCRIPTION("Freescale VF610 pinctrl driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 4e7e8017a80e1810100c9b416b86e3baef900285 Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Tue, 21 May 2013 19:38:00 +0530 Subject: pinctrl: pinctrl-single: enhance to configure multiple pins of different modules Add support to configure multiple pins in each register, existing implementation added by [1] does not support full fledge multiple pin configuration in single register, reports a pin clash when different modules configure different bits of same register. The issue reported and discussed here http://www.spinics.net/lists/arm-kernel/msg235213.html With pinctrl-single,bits-per-mux property specified, use function-mask property to find out number pins to configure. Allocate and register pin control functions based sub mask. Tested on da850/omap-l138 EVM. does not support variable submask for pins. does not support pinconf. [1] "pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux" (9e605cb68a21d5704839a192a46ebcf387773704), Signed-off-by: Manjunathappa, Prakash Reported-by: Lad, Prabhakar Tested-by: Lad, Prabhakar Acked-by: Haojian Zhuang Acked-by: Tony Lindgren Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/pinctrl-single.txt | 3 +- drivers/pinctrl/pinctrl-single.c | 198 +++++++++++++++++---- 2 files changed, 167 insertions(+), 34 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 08f0c3d01575..5a02e30dd262 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -18,7 +18,8 @@ Optional properties: pin functions is ignored - pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin + more than one pin, for which "pinctrl-single,function-mask" property specifies + position mask of pin. - pinctrl-single,drive-strength : array of value that are used to configure drive strength in the pinmux register. They're value of drive strength diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index b9fa04618601..9a1ea65014d7 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -163,6 +163,7 @@ struct pcs_name { * @foff: value to turn mux off * @fmax: max number of functions in fmask * @is_pinconf: whether supports pinconf + * @bits_per_pin:number of bits per pin * @names: array of register names for pins * @pins: physical pins on the SoC * @pgtree: pingroup index radix tree @@ -190,6 +191,7 @@ struct pcs_device { unsigned fmax; bool bits_per_mux; bool is_pinconf; + unsigned bits_per_pin; struct pcs_name *names; struct pcs_data pins; struct radix_tree_root pgtree; @@ -431,10 +433,11 @@ static int pcs_enable(struct pinctrl_dev *pctldev, unsigned fselector, vals = &func->vals[i]; val = pcs->read(vals->reg); - if (!vals->mask) - mask = pcs->fmask; + + if (pcs->bits_per_mux) + mask = vals->mask; else - mask = pcs->fmask & vals->mask; + mask = pcs->fmask; val &= ~mask; val |= (vals->val & mask); @@ -779,7 +782,13 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs) int mux_bytes, nr_pins, i; mux_bytes = pcs->width / BITS_PER_BYTE; - nr_pins = pcs->size / mux_bytes; + + if (pcs->bits_per_mux) { + pcs->bits_per_pin = fls(pcs->fmask); + nr_pins = (pcs->size * BITS_PER_BYTE) / pcs->bits_per_pin; + } else { + nr_pins = pcs->size / mux_bytes; + } dev_dbg(pcs->dev, "allocating %i pins\n", nr_pins); pcs->pins.pa = devm_kzalloc(pcs->dev, @@ -800,8 +809,14 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs) for (i = 0; i < pcs->desc.npins; i++) { unsigned offset; int res; + int byte_num; - offset = i * mux_bytes; + if (pcs->bits_per_mux) { + byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE; + offset = (byte_num / mux_bytes) * mux_bytes; + } else { + offset = i * mux_bytes; + } res = pcs_add_pin(pcs, offset); if (res < 0) { dev_err(pcs->dev, "error adding pins: %i\n", res); @@ -919,7 +934,10 @@ static int pcs_get_pin_by_offset(struct pcs_device *pcs, unsigned offset) return -EINVAL; } - index = offset / (pcs->width / BITS_PER_BYTE); + if (pcs->bits_per_mux) + index = (offset * BITS_PER_BYTE) / pcs->bits_per_pin; + else + index = offset / (pcs->width / BITS_PER_BYTE); return index; } @@ -1097,29 +1115,18 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, { struct pcs_func_vals *vals; const __be32 *mux; - int size, params, rows, *pins, index = 0, found = 0, res = -ENOMEM; + int size, rows, *pins, index = 0, found = 0, res = -ENOMEM; struct pcs_function *function; - if (pcs->bits_per_mux) { - params = 3; - mux = of_get_property(np, PCS_MUX_BITS_NAME, &size); - } else { - params = 2; - mux = of_get_property(np, PCS_MUX_PINS_NAME, &size); - } - - if (!mux) { - dev_err(pcs->dev, "no valid property for %s\n", np->name); - return -EINVAL; - } - - if (size < (sizeof(*mux) * params)) { - dev_err(pcs->dev, "bad data for %s\n", np->name); + mux = of_get_property(np, PCS_MUX_PINS_NAME, &size); + if ((!mux) || (size < sizeof(*mux) * 2)) { + dev_err(pcs->dev, "bad data for mux %s\n", + np->name); return -EINVAL; } size /= sizeof(*mux); /* Number of elements in array */ - rows = size / params; + rows = size / 2; vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows, GFP_KERNEL); if (!vals) @@ -1137,10 +1144,6 @@ static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, val = be32_to_cpup(mux + index++); vals[found].reg = pcs->base + offset; vals[found].val = val; - if (params == 3) { - val = be32_to_cpup(mux + index++); - vals[found].mask = val; - } pin = pcs_get_pin_by_offset(pcs, offset); if (pin < 0) { @@ -1184,6 +1187,125 @@ free_function: free_pins: devm_kfree(pcs->dev, pins); +free_vals: + devm_kfree(pcs->dev, vals); + + return res; +} + +#define PARAMS_FOR_BITS_PER_MUX 3 + +static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, + struct device_node *np, + struct pinctrl_map **map, + unsigned *num_maps, + const char **pgnames) +{ + struct pcs_func_vals *vals; + const __be32 *mux; + int size, rows, *pins, index = 0, found = 0, res = -ENOMEM; + int npins_in_row; + struct pcs_function *function; + + mux = of_get_property(np, PCS_MUX_BITS_NAME, &size); + + if (!mux) { + dev_err(pcs->dev, "no valid property for %s\n", np->name); + return -EINVAL; + } + + if (size < (sizeof(*mux) * PARAMS_FOR_BITS_PER_MUX)) { + dev_err(pcs->dev, "bad data for %s\n", np->name); + return -EINVAL; + } + + /* Number of elements in array */ + size /= sizeof(*mux); + + rows = size / PARAMS_FOR_BITS_PER_MUX; + npins_in_row = pcs->width / pcs->bits_per_pin; + + vals = devm_kzalloc(pcs->dev, sizeof(*vals) * rows * npins_in_row, + GFP_KERNEL); + if (!vals) + return -ENOMEM; + + pins = devm_kzalloc(pcs->dev, sizeof(*pins) * rows * npins_in_row, + GFP_KERNEL); + if (!pins) + goto free_vals; + + while (index < size) { + unsigned offset, val; + unsigned mask, bit_pos, val_pos, mask_pos, submask; + unsigned pin_num_from_lsb; + int pin; + + offset = be32_to_cpup(mux + index++); + val = be32_to_cpup(mux + index++); + mask = be32_to_cpup(mux + index++); + + /* Parse pins in each row from LSB */ + while (mask) { + bit_pos = ffs(mask); + pin_num_from_lsb = bit_pos / pcs->bits_per_pin; + mask_pos = ((pcs->fmask) << (bit_pos - 1)); + val_pos = val & mask_pos; + submask = mask & mask_pos; + mask &= ~mask_pos; + + if (submask != mask_pos) { + dev_warn(pcs->dev, + "Invalid submask 0x%x for %s at 0x%x\n", + submask, np->name, offset); + continue; + } + + vals[found].mask = submask; + vals[found].reg = pcs->base + offset; + vals[found].val = val_pos; + + pin = pcs_get_pin_by_offset(pcs, offset); + if (pin < 0) { + dev_err(pcs->dev, + "could not add functions for %s %ux\n", + np->name, offset); + break; + } + pins[found++] = pin + pin_num_from_lsb; + } + } + + pgnames[0] = np->name; + function = pcs_add_function(pcs, np, np->name, vals, found, pgnames, 1); + if (!function) + goto free_pins; + + res = pcs_add_pingroup(pcs, np, np->name, pins, found); + if (res < 0) + goto free_function; + + (*map)->type = PIN_MAP_TYPE_MUX_GROUP; + (*map)->data.mux.group = np->name; + (*map)->data.mux.function = np->name; + + if (pcs->is_pinconf) { + dev_err(pcs->dev, "pinconf not supported\n"); + goto free_pingroups; + } + + *num_maps = 1; + return 0; + +free_pingroups: + pcs_free_pingroups(pcs); + *num_maps = 1; +free_function: + pcs_remove_function(pcs, function); + +free_pins: + devm_kfree(pcs->dev, pins); + free_vals: devm_kfree(pcs->dev, vals); @@ -1219,12 +1341,22 @@ static int pcs_dt_node_to_map(struct pinctrl_dev *pctldev, goto free_map; } - ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map, num_maps, - pgnames); - if (ret < 0) { - dev_err(pcs->dev, "no pins entries for %s\n", - np_config->name); - goto free_pgnames; + if (pcs->bits_per_mux) { + ret = pcs_parse_bits_in_pinctrl_entry(pcs, np_config, map, + num_maps, pgnames); + if (ret < 0) { + dev_err(pcs->dev, "no pins entries for %s\n", + np_config->name); + goto free_pgnames; + } + } else { + ret = pcs_parse_one_pinctrl_entry(pcs, np_config, map, + num_maps, pgnames); + if (ret < 0) { + dev_err(pcs->dev, "no pins entries for %s\n", + np_config->name); + goto free_pgnames; + } } return 0; -- cgit v1.2.3 From 7db9af4b6e41be599e0fcd50d687138a5add428c Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Mon, 10 Jun 2013 21:40:29 +0200 Subject: pinctrl: add function to parse generic pinconfig properties from a dt node pinconf_generic_parse_dt_config() takes a node as input and generates an array of generic pinconfig values from the properties of this node. As I couldn't find a mechanism to count the number of properties of a node the function uses internally an array to accept one of parameter and copies the real present options to a smaller variable at its end. Signed-off-by: Heiko Stuebner Signed-off-by: Linus Walleij --- .../bindings/pinctrl/pinctrl-bindings.txt | 38 ++++++++++ drivers/pinctrl/pinconf-generic.c | 81 ++++++++++++++++++++++ drivers/pinctrl/pinconf.h | 6 ++ 3 files changed, 125 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index c95ea8278f87..ef7cd572214c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -126,3 +126,41 @@ device; they may be grandchildren, for example. Whether this is legal, and whether there is any interaction between the child and intermediate parent nodes, is again defined entirely by the binding for the individual pin controller device. + +== Using generic pinconfig options == + +Generic pinconfig parameters can be used by defining a separate node containing +the applicable parameters (and optional values), like: + +pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + drive-strength = <20>; +}; + +This node should then be referenced in the appropriate pinctrl node as a phandle +and parsed in the driver using the pinconf_generic_parse_dt_config function. + +Supported configuration parameters are: + +bias-disable - disable any pin bias +bias-high-impedance - high impedance mode ("third-state", "floating") +bias-bus-hold - latch weakly +bias-pull-up - pull up the pin +bias-pull-down - pull down the pin +bias-pull-pin-default - use pin-default pull state +drive-push-pull - drive actively high and low +drive-open-drain - drive with open drain +drive-open-source - drive with open source +drive-strength - sink or source at most X mA +input-schmitt-enable - enable schmitt-trigger mode +input-schmitt-disable - disable schmitt-trigger mode +input-schmitt - run in schmitt-trigger mode with hysteresis X +input-debounce - debounce mode with debound time X +power-source - select power source X +slew-rate - use slew-rate X +low-power-mode - low power mode +output-low - set the pin to output mode with low level +output-high - set the pin to output mode with high level + +More in-depth documentation on these parameters can be found in + diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 9a6812b50a32..d3c693c0c250 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "core.h" #include "pinconf.h" @@ -139,3 +140,83 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev, } EXPORT_SYMBOL_GPL(pinconf_generic_dump_config); #endif + +#ifdef CONFIG_OF +struct pinconf_generic_dt_params { + const char * const property; + enum pin_config_param param; + u32 default_value; +}; + +static struct pinconf_generic_dt_params dt_params[] = { + { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, + { "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 }, + { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, + { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 0 }, + { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 0 }, + { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 0 }, + { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 }, + { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 }, + { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 }, + { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, + { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, + { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, + { "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 }, + { "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 }, + { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, + { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, + { "low-power-mode", PIN_CONFIG_LOW_POWER_MODE, 0 }, + { "output-low", PIN_CONFIG_OUTPUT, 0, }, + { "output-high", PIN_CONFIG_OUTPUT, 1, }, +}; + +/** + * pinconf_generic_parse_dt_config() + * parse the config properties into generic pinconfig values. + * @np: node containing the pinconfig properties + * @configs: array with nconfigs entries containing the generic pinconf values + * @nconfigs: umber of configurations + */ +int pinconf_generic_parse_dt_config(struct device_node *np, + unsigned long **configs, + unsigned int *nconfigs) +{ + unsigned long cfg[ARRAY_SIZE(dt_params)]; + unsigned int ncfg = 0; + int ret; + int i; + u32 val; + + if (!np) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(dt_params); i++) { + struct pinconf_generic_dt_params *par = &dt_params[i]; + ret = of_property_read_u32(np, par->property, &val); + + /* property not found */ + if (ret == -EINVAL) + continue; + + /* use default value, when no value is specified */ + if (ret) + val = par->default_value; + + pr_debug("found %s with value %u\n", par->property, val); + cfg[ncfg] = pinconf_to_config_packed(par->param, val); + ncfg++; + } + + /* + * Now limit the number of configs to the real number of + * found properties. + */ + *configs = kzalloc(ncfg * sizeof(unsigned long), GFP_KERNEL); + if (!*configs) + return -ENOMEM; + + memcpy(*configs, &cfg, ncfg * sizeof(unsigned long)); + *nconfigs = ncfg; + return 0; +} +#endif diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index 92c7267244d2..a4a5417e1413 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -123,3 +123,9 @@ static inline void pinconf_generic_dump_config(struct pinctrl_dev *pctldev, return; } #endif + +#if defined(CONFIG_GENERIC_PINCONF) && defined(CONFIG_OF) +int pinconf_generic_parse_dt_config(struct device_node *np, + unsigned long **configs, + unsigned int *nconfigs); +#endif -- cgit v1.2.3 From d3e5116119bd02ea7716bbe04b39c21bba4bcf42 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Mon, 10 Jun 2013 22:16:22 +0200 Subject: pinctrl: add pinctrl driver for Rockchip SoCs This driver adds support the Cortex-A9 based SoCs from Rockchip, so at least the RK2928, RK3066 (a and b) and RK3188. Earlier Rockchip SoCs seem to use similar mechanics for gpio handling so should be supportable with relative small changes. Pull handling on the rk3188 is currently a stub, due to it being a bit different to the earlier SoCs. Pinmuxing as well as gpio (and interrupt-) handling tested on a rk3066a based machine. Signed-off-by: Heiko Stuebner Signed-off-by: Linus Walleij --- .../bindings/pinctrl/rockchip,pinctrl.txt | 97 ++ drivers/pinctrl/Kconfig | 6 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-rockchip.c | 1360 ++++++++++++++++++++ include/dt-bindings/pinctrl/rockchip.h | 32 + 5 files changed, 1496 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-rockchip.c create mode 100644 include/dt-bindings/pinctrl/rockchip.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt new file mode 100644 index 000000000000..b0fb1018d7ad --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -0,0 +1,97 @@ +* Rockchip Pinmux Controller + +The Rockchip Pinmux Controller, enables the IC +to share one PAD to several functional blocks. The sharing is done by +multiplexing the PAD input/output signals. For each PAD there are up to +4 muxing options with option 0 being the use as a GPIO. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The Rockchip pin configuration node is a node of a group of pins which can be +used for a specific device or function. This node represents both mux and +config of the pins in that group. The 'pins' selects the function mode(also +named pin mode) this pin can work on and the 'config' configures various pad +settings such as pull-up, etc. + +The pins are grouped into up to 5 individual pin banks which need to be +defined as gpio sub-nodes of the pinmux controller. + +Required properties for iomux controller: + - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" + "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" + +Required properties for gpio sub nodes: + - compatible: "rockchip,gpio-bank" + - reg: register of the gpio bank (different than the iomux registerset) + - interrupts: base interrupt of the gpio bank in the interrupt controller + - clocks: clock that drives this bank + - gpio-controller: identifies the node as a gpio controller and pin bank. + - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See generic + GPIO binding documentation for description of particular cells. + - interrupt-controller: identifies the controller node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2 and the interrupt + cells should use the standard two-cell scheme described in + bindings/interrupt-controller/interrupts.txt + +Required properties for pin configuration node: + - rockchip,pins: 3 integers array, represents a group of pins mux and config + setting. The format is rockchip,pins = . + The MUX 0 means gpio and MUX 1 to 3 mean the specific device function. + The phandle of a node containing the generic pinconfig options + to use, as described in pinctrl-bindings.txt in this directory. + +Examples: + +#include + +... + +pinctrl@20008000 { + compatible = "rockchip,rk3066a-pinctrl"; + reg = <0x20008000 0x150>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = ; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ... + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = , + ; + }; + }; +}; + +uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&mux_uart2>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; +}; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 47cb923cd2df..269c0406dce4 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -158,6 +158,12 @@ config PINCTRL_DB8540 bool "DB8540 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_U8500 +config PINCTRL_ROCKCHIP + bool + select PINMUX + select GENERIC_PINCONF + select GENERIC_IRQ_CHIP + config PINCTRL_SINGLE tristate "One-register-per-pin type device tree based pinctrl driver" depends on OF diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 08f2b3e02d42..ff38aca65689 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o +obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += sirf/ obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c new file mode 100644 index 000000000000..c605b63b5a6b --- /dev/null +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -0,0 +1,1360 @@ +/* + * Pinctrl driver for Rockchip SoCs + * + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner + * + * With some ideas taken from pinctrl-samsung: + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2012 Linaro Ltd + * http://www.linaro.org + * + * and pinctrl-at91: + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinconf.h" + +/* GPIO control registers */ +#define GPIO_SWPORT_DR 0x00 +#define GPIO_SWPORT_DDR 0x04 +#define GPIO_INTEN 0x30 +#define GPIO_INTMASK 0x34 +#define GPIO_INTTYPE_LEVEL 0x38 +#define GPIO_INT_POLARITY 0x3c +#define GPIO_INT_STATUS 0x40 +#define GPIO_INT_RAWSTATUS 0x44 +#define GPIO_DEBOUNCE 0x48 +#define GPIO_PORTS_EOI 0x4c +#define GPIO_EXT_PORT 0x50 +#define GPIO_LS_SYNC 0x60 + +/** + * @reg_base: register base of the gpio bank + * @clk: clock of the gpio bank + * @irq: interrupt of the gpio bank + * @pin_base: first pin number + * @nr_pins: number of pins in this bank + * @name: name of the bank + * @bank_num: number of the bank, to account for holes + * @valid: are all necessary informations present + * @of_node: dt node of this bank + * @drvdata: common pinctrl basedata + * @domain: irqdomain of the gpio bank + * @gpio_chip: gpiolib chip + * @grange: gpio range + * @slock: spinlock for the gpio bank + */ +struct rockchip_pin_bank { + void __iomem *reg_base; + struct clk *clk; + int irq; + u32 pin_base; + u8 nr_pins; + char *name; + u8 bank_num; + bool valid; + struct device_node *of_node; + struct rockchip_pinctrl *drvdata; + struct irq_domain *domain; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range grange; + spinlock_t slock; + +}; + +#define PIN_BANK(id, pins, label) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + } + +/** + * @pull_auto: some SoCs don't allow pulls to be specified as up or down, but + * instead decide this automatically based on the pad-type. + */ +struct rockchip_pin_ctrl { + struct rockchip_pin_bank *pin_banks; + u32 nr_banks; + u32 nr_pins; + char *label; + int mux_offset; + int pull_offset; + bool pull_auto; + int pull_bank_stride; +}; + +struct rockchip_pin_config { + unsigned int func; + unsigned long *configs; + unsigned int nconfigs; +}; + +/** + * struct rockchip_pin_group: represent group of pins of a pinmux function. + * @name: name of the pin group, used to lookup the group. + * @pins: the pins included in this group. + * @npins: number of pins included in this group. + * @func: the mux function number to be programmed when selected. + * @configs: the config values to be set for each pin + * @nconfigs: number of configs for each pin + */ +struct rockchip_pin_group { + const char *name; + unsigned int npins; + unsigned int *pins; + struct rockchip_pin_config *data; +}; + +/** + * struct rockchip_pmx_func: represent a pin function. + * @name: name of the pin function, used to lookup the function. + * @groups: one or more names of pin groups that provide this function. + * @num_groups: number of groups included in @groups. + */ +struct rockchip_pmx_func { + const char *name; + const char **groups; + u8 ngroups; +}; + +struct rockchip_pinctrl { + void __iomem *reg_base; + struct device *dev; + struct rockchip_pin_ctrl *ctrl; + struct pinctrl_desc pctl; + struct pinctrl_dev *pctl_dev; + struct rockchip_pin_group *groups; + unsigned int ngroups; + struct rockchip_pmx_func *functions; + unsigned int nfunctions; +}; + +static inline struct rockchip_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) +{ + return container_of(gc, struct rockchip_pin_bank, gpio_chip); +} + +static const inline struct rockchip_pin_group *pinctrl_name_to_group( + const struct rockchip_pinctrl *info, + const char *name) +{ + const struct rockchip_pin_group *grp = NULL; + int i; + + for (i = 0; i < info->ngroups; i++) { + if (strcmp(info->groups[i].name, name)) + continue; + + grp = &info->groups[i]; + break; + } + + return grp; +} + +/* + * given a pin number that is local to a pin controller, find out the pin bank + * and the register base of the pin bank. + */ +static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info, + unsigned pin) +{ + struct rockchip_pin_bank *b = info->ctrl->pin_banks; + + while ((pin >= b->pin_base) && + ((b->pin_base + b->nr_pins - 1) < pin)) + b++; + + return b; +} + +static struct rockchip_pin_bank *bank_num_to_bank( + struct rockchip_pinctrl *info, + unsigned num) +{ + struct rockchip_pin_bank *b = info->ctrl->pin_banks; + int i; + + for (i = 0; i < info->ctrl->nr_banks; i++) { + if (b->bank_num == num) + break; + + b++; + } + + if (b->bank_num != num) + return ERR_PTR(-EINVAL); + + return b; +} + +/* + * Pinctrl_ops handling + */ + +static int rockchip_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->ngroups; +} + +static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->groups[selector].name; +} + +static int rockchip_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, const unsigned **pins, + unsigned *npins) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + if (selector >= info->ngroups) + return -EINVAL; + + *pins = info->groups[selector].pins; + *npins = info->groups[selector].npins; + + return 0; +} + +static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const struct rockchip_pin_group *grp; + struct pinctrl_map *new_map; + struct device_node *parent; + int map_num = 1; + int i; + + /* + * first find the group of this node and check if we need to create + * config maps for pins + */ + grp = pinctrl_name_to_group(info, np->name); + if (!grp) { + dev_err(info->dev, "unable to find group for node %s\n", + np->name); + return -EINVAL; + } + + map_num += grp->npins; + new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num, + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + *map = new_map; + *num_maps = map_num; + + /* create mux map */ + parent = of_get_parent(np); + if (!parent) { + devm_kfree(pctldev->dev, new_map); + return -EINVAL; + } + new_map[0].type = PIN_MAP_TYPE_MUX_GROUP; + new_map[0].data.mux.function = parent->name; + new_map[0].data.mux.group = np->name; + of_node_put(parent); + + /* create config map */ + new_map++; + for (i = 0; i < grp->npins; i++) { + new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN; + new_map[i].data.configs.group_or_pin = + pin_get_name(pctldev, grp->pins[i]); + new_map[i].data.configs.configs = grp->data[i].configs; + new_map[i].data.configs.num_configs = grp->data[i].nconfigs; + } + + dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n", + (*map)->data.mux.function, (*map)->data.mux.group, map_num); + + return 0; +} + +static void rockchip_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ +} + +static const struct pinctrl_ops rockchip_pctrl_ops = { + .get_groups_count = rockchip_get_groups_count, + .get_group_name = rockchip_get_group_name, + .get_group_pins = rockchip_get_group_pins, + .dt_node_to_map = rockchip_dt_node_to_map, + .dt_free_map = rockchip_dt_free_map, +}; + +/* + * Hardware access + */ + +/* + * Set a new mux function for a pin. + * + * The register is divided into the upper and lower 16 bit. When changing + * a value, the previous register value is not read and changed. Instead + * it seems the changed bits are marked in the upper 16 bit, while the + * changed value gets set in the same offset in the lower 16 bit. + * All pin settings seem to be 2 bit wide in both the upper and lower + * parts. + * @bank: pin bank to change + * @pin: pin to change + * @mux: new mux function to set + */ +static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) +{ + struct rockchip_pinctrl *info = bank->drvdata; + void __iomem *reg = info->reg_base + info->ctrl->mux_offset; + unsigned long flags; + u8 bit; + u32 data; + + dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n", + bank->bank_num, pin, mux); + + /* get basic quadrupel of mux registers and the correct reg inside */ + reg += bank->bank_num * 0x10; + reg += (pin / 8) * 4; + bit = (pin % 8) * 2; + + spin_lock_irqsave(&bank->slock, flags); + + data = (3 << (bit + 16)); + data |= (mux & 3) << bit; + writel(data, reg); + + spin_unlock_irqrestore(&bank->slock, flags); +} + +static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + void __iomem *reg; + u8 bit; + + /* rk3066b does support any pulls */ + if (!ctrl->pull_offset) + return PIN_CONFIG_BIAS_DISABLE; + + reg = info->reg_base + ctrl->pull_offset; + + if (ctrl->pull_auto) { + reg += bank->bank_num * ctrl->pull_bank_stride; + reg += (pin_num / 16) * 4; + bit = pin_num % 16; + + return !(readl_relaxed(reg) & BIT(bit)) + ? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT + : PIN_CONFIG_BIAS_DISABLE; + } else { + dev_err(info->dev, "pull support for rk31xx not implemented\n"); + return -EIO; + } +} + +static int rockchip_set_pull(struct rockchip_pin_bank *bank, + int pin_num, int pull) +{ + struct rockchip_pinctrl *info = bank->drvdata; + struct rockchip_pin_ctrl *ctrl = info->ctrl; + void __iomem *reg; + unsigned long flags; + u8 bit; + u32 data; + + dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n", + bank->bank_num, pin_num, pull); + + /* rk3066b does support any pulls */ + if (!ctrl->pull_offset) + return pull ? -EINVAL : 0; + + reg = info->reg_base + ctrl->pull_offset; + + if (ctrl->pull_auto) { + if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT && + pull != PIN_CONFIG_BIAS_DISABLE) { + dev_err(info->dev, "only PIN_DEFAULT and DISABLE allowed\n"); + return -EINVAL; + } + + reg += bank->bank_num * ctrl->pull_bank_stride; + reg += (pin_num / 16) * 4; + bit = pin_num % 16; + + spin_lock_irqsave(&bank->slock, flags); + + data = BIT(bit + 16); + if (pull == PIN_CONFIG_BIAS_DISABLE) + data |= BIT(bit); + writel(data, reg); + + spin_unlock_irqrestore(&bank->slock, flags); + } else { + if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) { + dev_err(info->dev, "pull direction (up/down) needs to be specified\n"); + return -EINVAL; + } + + dev_err(info->dev, "pull support for rk31xx not implemented\n"); + return -EIO; + } + + return 0; +} + +/* + * Pinmux_ops handling + */ + +static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->nfunctions; +} + +static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + return info->functions[selector].name; +} + +static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev, + unsigned selector, const char * const **groups, + unsigned * const num_groups) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + + *groups = info->functions[selector].groups; + *num_groups = info->functions[selector].ngroups; + + return 0; +} + +static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const unsigned int *pins = info->groups[group].pins; + const struct rockchip_pin_config *data = info->groups[group].data; + struct rockchip_pin_bank *bank; + int cnt; + + dev_dbg(info->dev, "enable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + /* + * for each pin in the pin group selected, program the correspoding pin + * pin function number in the config register. + */ + for (cnt = 0; cnt < info->groups[group].npins; cnt++) { + bank = pin_to_bank(info, pins[cnt]); + rockchip_set_mux(bank, pins[cnt] - bank->pin_base, + data[cnt].func); + } + + return 0; +} + +static void rockchip_pmx_disable(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + const unsigned int *pins = info->groups[group].pins; + struct rockchip_pin_bank *bank; + int cnt; + + dev_dbg(info->dev, "disable function %s group %s\n", + info->functions[selector].name, info->groups[group].name); + + for (cnt = 0; cnt < info->groups[group].npins; cnt++) { + bank = pin_to_bank(info, pins[cnt]); + rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0); + } +} + +/* + * The calls to gpio_direction_output() and gpio_direction_input() + * leads to this function call (via the pinctrl_gpio_direction_{input|output}() + * function called from the gpiolib interface). + */ +static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, bool input) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct rockchip_pin_bank *bank; + struct gpio_chip *chip; + int pin; + u32 data; + + chip = range->gc; + bank = gc_to_pin_bank(chip); + pin = offset - chip->base; + + dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n", + offset, range->name, pin, input ? "input" : "output"); + + rockchip_set_mux(bank, pin, RK_FUNC_GPIO); + + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); + /* set bit to 1 for output, 0 for input */ + if (!input) + data |= BIT(pin); + else + data &= ~BIT(pin); + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); + + return 0; +} + +static const struct pinmux_ops rockchip_pmx_ops = { + .get_functions_count = rockchip_pmx_get_funcs_count, + .get_function_name = rockchip_pmx_get_func_name, + .get_function_groups = rockchip_pmx_get_groups, + .enable = rockchip_pmx_enable, + .disable = rockchip_pmx_disable, + .gpio_set_direction = rockchip_pmx_gpio_set_direction, +}; + +/* + * Pinconf_ops handling + */ + +/* set the pin config settings for a specified pin */ +static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long config) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); + enum pin_config_param param = pinconf_to_config_param(config); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + return rockchip_set_pull(bank, pin - bank->pin_base, param); + break; + default: + return -ENOTSUPP; + break; + } + + return 0; +} + +/* get the pin config settings for a specified pin */ +static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); + struct rockchip_pin_bank *bank = pin_to_bank(info, pin); + enum pin_config_param param = pinconf_to_config_param(*config); + unsigned int pull; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + pull = rockchip_get_pull(bank, pin - bank->pin_base); + + if (pull != param) + return -EINVAL; + + *config = 0; + break; + default: + return -ENOTSUPP; + break; + } + + return 0; +} + +static const struct pinconf_ops rockchip_pinconf_ops = { + .pin_config_get = rockchip_pinconf_get, + .pin_config_set = rockchip_pinconf_set, +}; + +static const char *gpio_compat = "rockchip,gpio-bank"; + +static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info, + struct device_node *np) +{ + struct device_node *child; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) + continue; + + info->nfunctions++; + info->ngroups += of_get_child_count(child); + } +} + +static int rockchip_pinctrl_parse_groups(struct device_node *np, + struct rockchip_pin_group *grp, + struct rockchip_pinctrl *info, + u32 index) +{ + struct rockchip_pin_bank *bank; + int size; + const __be32 *list; + int num; + int i, j; + int ret; + + dev_dbg(info->dev, "group(%d): %s\n", index, np->name); + + /* Initialise group */ + grp->name = np->name; + + /* + * the binding format is rockchip,pins = , + * do sanity check and calculate pins number + */ + list = of_get_property(np, "rockchip,pins", &size); + /* we do not check return since it's safe node passed down */ + size /= sizeof(*list); + if (!size || size % 4) { + dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n"); + return -EINVAL; + } + + grp->npins = size / 4; + + grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int), + GFP_KERNEL); + grp->data = devm_kzalloc(info->dev, grp->npins * + sizeof(struct rockchip_pin_config), + GFP_KERNEL); + if (!grp->pins || !grp->data) + return -ENOMEM; + + for (i = 0, j = 0; i < size; i += 4, j++) { + const __be32 *phandle; + struct device_node *np_config; + + num = be32_to_cpu(*list++); + bank = bank_num_to_bank(info, num); + if (IS_ERR(bank)) + return PTR_ERR(bank); + + grp->pins[j] = bank->pin_base + be32_to_cpu(*list++); + grp->data[j].func = be32_to_cpu(*list++); + + phandle = list++; + if (!phandle) + return -EINVAL; + + np_config = of_find_node_by_phandle(be32_to_cpup(phandle)); + ret = pinconf_generic_parse_dt_config(np_config, + &grp->data[j].configs, &grp->data[j].nconfigs); + if (ret) + return ret; + } + + return 0; +} + +static int rockchip_pinctrl_parse_functions(struct device_node *np, + struct rockchip_pinctrl *info, + u32 index) +{ + struct device_node *child; + struct rockchip_pmx_func *func; + struct rockchip_pin_group *grp; + int ret; + static u32 grp_index; + u32 i = 0; + + dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name); + + func = &info->functions[index]; + + /* Initialise function */ + func->name = np->name; + func->ngroups = of_get_child_count(np); + if (func->ngroups <= 0) + return 0; + + func->groups = devm_kzalloc(info->dev, + func->ngroups * sizeof(char *), GFP_KERNEL); + if (!func->groups) + return -ENOMEM; + + for_each_child_of_node(np, child) { + func->groups[i] = child->name; + grp = &info->groups[grp_index++]; + ret = rockchip_pinctrl_parse_groups(child, grp, info, i++); + if (ret) + return ret; + } + + return 0; +} + +static int rockchip_pinctrl_parse_dt(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child; + int ret; + int i; + + rockchip_pinctrl_child_count(info, np); + + dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions); + dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups); + + info->functions = devm_kzalloc(dev, info->nfunctions * + sizeof(struct rockchip_pmx_func), + GFP_KERNEL); + if (!info->functions) { + dev_err(dev, "failed to allocate memory for function list\n"); + return -EINVAL; + } + + info->groups = devm_kzalloc(dev, info->ngroups * + sizeof(struct rockchip_pin_group), + GFP_KERNEL); + if (!info->groups) { + dev_err(dev, "failed allocate memory for ping group list\n"); + return -EINVAL; + } + + i = 0; + + for_each_child_of_node(np, child) { + if (of_device_is_compatible(child, gpio_compat)) + continue; + ret = rockchip_pinctrl_parse_functions(child, info, i++); + if (ret) { + dev_err(&pdev->dev, "failed to parse function\n"); + return ret; + } + } + + return 0; +} + +static int rockchip_pinctrl_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct pinctrl_desc *ctrldesc = &info->pctl; + struct pinctrl_pin_desc *pindesc, *pdesc; + struct rockchip_pin_bank *pin_bank; + int pin, bank, ret; + int k; + + ctrldesc->name = "rockchip-pinctrl"; + ctrldesc->owner = THIS_MODULE; + ctrldesc->pctlops = &rockchip_pctrl_ops; + ctrldesc->pmxops = &rockchip_pmx_ops; + ctrldesc->confops = &rockchip_pinconf_ops; + + pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) * + info->ctrl->nr_pins, GFP_KERNEL); + if (!pindesc) { + dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n"); + return -ENOMEM; + } + ctrldesc->pins = pindesc; + ctrldesc->npins = info->ctrl->nr_pins; + + pdesc = pindesc; + for (bank = 0 , k = 0; bank < info->ctrl->nr_banks; bank++) { + pin_bank = &info->ctrl->pin_banks[bank]; + for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) { + pdesc->number = k; + pdesc->name = kasprintf(GFP_KERNEL, "%s-%d", + pin_bank->name, pin); + pdesc++; + } + } + + info->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, info); + if (!info->pctl_dev) { + dev_err(&pdev->dev, "could not register pinctrl driver\n"); + return -EINVAL; + } + + for (bank = 0; bank < info->ctrl->nr_banks; ++bank) { + pin_bank = &info->ctrl->pin_banks[bank]; + pin_bank->grange.name = pin_bank->name; + pin_bank->grange.id = bank; + pin_bank->grange.pin_base = pin_bank->pin_base; + pin_bank->grange.base = pin_bank->gpio_chip.base; + pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.gc = &pin_bank->gpio_chip; + pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange); + } + + ret = rockchip_pinctrl_parse_dt(pdev, info); + if (ret) { + pinctrl_unregister(info->pctl_dev); + return ret; + } + + return 0; +} + +/* + * GPIO handling + */ + +static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct rockchip_pin_bank *bank = gc_to_pin_bank(gc); + void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR; + unsigned long flags; + u32 data; + + spin_lock_irqsave(&bank->slock, flags); + + data = readl(reg); + data &= ~BIT(offset); + if (value) + data |= BIT(offset); + writel(data, reg); + + spin_unlock_irqrestore(&bank->slock, flags); +} + +/* + * Returns the level of the pin for input direction and setting of the DR + * register for output gpios. + */ +static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct rockchip_pin_bank *bank = gc_to_pin_bank(gc); + u32 data; + + data = readl(bank->reg_base + GPIO_EXT_PORT); + data >>= offset; + data &= 1; + return data; +} + +/* + * gpiolib gpio_direction_input callback function. The setting of the pin + * mux function as 'gpio input' will be handled by the pinctrl susbsystem + * interface. + */ +static int rockchip_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + return pinctrl_gpio_direction_input(gc->base + offset); +} + +/* + * gpiolib gpio_direction_output callback function. The setting of the pin + * mux function as 'gpio output' will be handled by the pinctrl susbsystem + * interface. + */ +static int rockchip_gpio_direction_output(struct gpio_chip *gc, + unsigned offset, int value) +{ + rockchip_gpio_set(gc, offset, value); + return pinctrl_gpio_direction_output(gc->base + offset); +} + +/* + * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin + * and a virtual IRQ, if not already present. + */ +static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct rockchip_pin_bank *bank = gc_to_pin_bank(gc); + unsigned int virq; + + if (!bank->domain) + return -ENXIO; + + virq = irq_create_mapping(bank->domain, offset); + + return (virq) ? : -ENXIO; +} + +static const struct gpio_chip rockchip_gpiolib_chip = { + .set = rockchip_gpio_set, + .get = rockchip_gpio_get, + .direction_input = rockchip_gpio_direction_input, + .direction_output = rockchip_gpio_direction_output, + .to_irq = rockchip_gpio_to_irq, + .owner = THIS_MODULE, +}; + +/* + * Interrupt handling + */ + +static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_get_chip(irq); + struct rockchip_pin_bank *bank = irq_get_handler_data(irq); + u32 pend; + + dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name); + + chained_irq_enter(chip, desc); + + pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS); + + while (pend) { + unsigned int virq; + + irq = __ffs(pend); + pend &= ~BIT(irq); + virq = irq_linear_revmap(bank->domain, irq); + + if (!virq) { + dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq); + continue; + } + + dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq); + + generic_handle_irq(virq); + } + + chained_irq_exit(chip, desc); +} + +static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct rockchip_pin_bank *bank = gc->private; + u32 mask = BIT(d->hwirq); + u32 polarity; + u32 level; + u32 data; + + if (type & IRQ_TYPE_EDGE_BOTH) + __irq_set_handler_locked(d->irq, handle_edge_irq); + else + __irq_set_handler_locked(d->irq, handle_level_irq); + + irq_gc_lock(gc); + + level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL); + polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY); + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + level |= mask; + polarity |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + level |= mask; + polarity &= ~mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + level &= ~mask; + polarity |= mask; + break; + case IRQ_TYPE_LEVEL_LOW: + level &= ~mask; + polarity &= ~mask; + break; + default: + return -EINVAL; + } + + writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL); + writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY); + + irq_gc_unlock(gc); + + /* make sure the pin is configured as gpio input */ + rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO); + data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR); + data &= ~mask; + writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR); + + return 0; +} + +static int rockchip_interrupts_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_pin_bank *bank = ctrl->pin_banks; + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; + struct irq_chip_generic *gc; + int ret; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!bank->valid) { + dev_warn(&pdev->dev, "bank %s is not valid\n", + bank->name); + continue; + } + + bank->domain = irq_domain_add_linear(bank->of_node, 32, + &irq_generic_chip_ops, NULL); + if (!bank->domain) { + dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n", + bank->name); + continue; + } + + ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1, + "rockchip_gpio_irq", handle_level_irq, + clr, 0, IRQ_GC_INIT_MASK_CACHE); + if (ret) { + dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n", + bank->name); + irq_domain_remove(bank->domain); + continue; + } + + gc = irq_get_domain_generic_chip(bank->domain, 0); + gc->reg_base = bank->reg_base; + gc->private = bank; + gc->chip_types[0].regs.mask = GPIO_INTEN; + gc->chip_types[0].regs.ack = GPIO_PORTS_EOI; + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; + gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; + + irq_set_handler_data(bank->irq, bank); + irq_set_chained_handler(bank->irq, rockchip_irq_demux); + } + + return 0; +} + +static int rockchip_gpiolib_register(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_pin_bank *bank = ctrl->pin_banks; + struct gpio_chip *gc; + int ret; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!bank->valid) { + dev_warn(&pdev->dev, "bank %s is not valid\n", + bank->name); + continue; + } + + bank->gpio_chip = rockchip_gpiolib_chip; + + gc = &bank->gpio_chip; + gc->base = bank->pin_base; + gc->ngpio = bank->nr_pins; + gc->dev = &pdev->dev; + gc->of_node = bank->of_node; + gc->label = bank->name; + + ret = gpiochip_add(gc); + if (ret) { + dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", + gc->label, ret); + goto fail; + } + } + + rockchip_interrupts_register(pdev, info); + + return 0; + +fail: + for (--i, --bank; i >= 0; --i, --bank) { + if (!bank->valid) + continue; + + if (gpiochip_remove(&bank->gpio_chip)) + dev_err(&pdev->dev, "gpio chip %s remove failed\n", + bank->gpio_chip.label); + } + return ret; +} + +static int rockchip_gpiolib_unregister(struct platform_device *pdev, + struct rockchip_pinctrl *info) +{ + struct rockchip_pin_ctrl *ctrl = info->ctrl; + struct rockchip_pin_bank *bank = ctrl->pin_banks; + int ret = 0; + int i; + + for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) { + if (!bank->valid) + continue; + + ret = gpiochip_remove(&bank->gpio_chip); + } + + if (ret) + dev_err(&pdev->dev, "gpio chip remove failed\n"); + + return ret; +} + +static int rockchip_get_bank_data(struct rockchip_pin_bank *bank, + struct device *dev) +{ + struct resource res; + + if (of_address_to_resource(bank->of_node, 0, &res)) { + dev_err(dev, "cannot find IO resource for bank\n"); + return -ENOENT; + } + + bank->reg_base = devm_ioremap_resource(dev, &res); + if (IS_ERR(bank->reg_base)) + return PTR_ERR(bank->reg_base); + + bank->irq = irq_of_parse_and_map(bank->of_node, 0); + + bank->clk = of_clk_get(bank->of_node, 0); + if (IS_ERR(bank->clk)) + return PTR_ERR(bank->clk); + + return clk_prepare_enable(bank->clk); +} + +static const struct of_device_id rockchip_pinctrl_dt_match[]; + +/* retrieve the soc specific data */ +static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data( + struct rockchip_pinctrl *d, + struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device_node *node = pdev->dev.of_node; + struct device_node *np; + struct rockchip_pin_ctrl *ctrl; + struct rockchip_pin_bank *bank; + int i; + + match = of_match_node(rockchip_pinctrl_dt_match, node); + ctrl = (struct rockchip_pin_ctrl *)match->data; + + for_each_child_of_node(node, np) { + if (!of_find_property(np, "gpio-controller", NULL)) + continue; + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + if (!strcmp(bank->name, np->name)) { + bank->of_node = np; + + if (!rockchip_get_bank_data(bank, &pdev->dev)) + bank->valid = true; + + break; + } + } + } + + bank = ctrl->pin_banks; + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + spin_lock_init(&bank->slock); + bank->drvdata = d; + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + } + + return ctrl; +} + +static int rockchip_pinctrl_probe(struct platform_device *pdev) +{ + struct rockchip_pinctrl *info; + struct device *dev = &pdev->dev; + struct rockchip_pin_ctrl *ctrl; + struct resource *res; + int ret; + + if (!dev->of_node) { + dev_err(dev, "device tree node not found\n"); + return -ENODEV; + } + + info = devm_kzalloc(dev, sizeof(struct rockchip_pinctrl), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ctrl = rockchip_pinctrl_get_soc_data(info, pdev); + if (!ctrl) { + dev_err(dev, "driver data not available\n"); + return -EINVAL; + } + info->ctrl = ctrl; + info->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "cannot find IO resource\n"); + return -ENOENT; + } + + info->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(info->reg_base)) + return PTR_ERR(info->reg_base); + + ret = rockchip_gpiolib_register(pdev, info); + if (ret) + return ret; + + ret = rockchip_pinctrl_register(pdev, info); + if (ret) { + rockchip_gpiolib_unregister(pdev, info); + return ret; + } + + platform_set_drvdata(pdev, info); + + return 0; +} + +static struct rockchip_pin_bank rk2928_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk2928_pin_ctrl = { + .pin_banks = rk2928_pin_banks, + .nr_banks = ARRAY_SIZE(rk2928_pin_banks), + .label = "RK2928-GPIO", + .mux_offset = 0xa8, + .pull_offset = 0x118, + .pull_auto = 1, + .pull_bank_stride = 8, +}; + +static struct rockchip_pin_bank rk3066a_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), + PIN_BANK(4, 32, "gpio4"), + PIN_BANK(6, 16, "gpio6"), +}; + +static struct rockchip_pin_ctrl rk3066a_pin_ctrl = { + .pin_banks = rk3066a_pin_banks, + .nr_banks = ARRAY_SIZE(rk3066a_pin_banks), + .label = "RK3066a-GPIO", + .mux_offset = 0xa8, + .pull_offset = 0x118, + .pull_auto = 1, + .pull_bank_stride = 8, +}; + +static struct rockchip_pin_bank rk3066b_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3066b_pin_ctrl = { + .pin_banks = rk3066b_pin_banks, + .nr_banks = ARRAY_SIZE(rk3066b_pin_banks), + .label = "RK3066b-GPIO", + .mux_offset = 0x60, + .pull_offset = -EINVAL, +}; + +static struct rockchip_pin_bank rk3188_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3188_pin_ctrl = { + .pin_banks = rk3188_pin_banks, + .nr_banks = ARRAY_SIZE(rk3188_pin_banks), + .label = "RK3188-GPIO", + .mux_offset = 0x68, + .pull_offset = 0x164, + .pull_bank_stride = 16, +}; + +static const struct of_device_id rockchip_pinctrl_dt_match[] = { + { .compatible = "rockchip,rk2928-pinctrl", + .data = (void *)&rk2928_pin_ctrl }, + { .compatible = "rockchip,rk3066a-pinctrl", + .data = (void *)&rk3066a_pin_ctrl }, + { .compatible = "rockchip,rk3066b-pinctrl", + .data = (void *)&rk3066b_pin_ctrl }, + { .compatible = "rockchip,rk3188-pinctrl", + .data = (void *)&rk3188_pin_ctrl }, + {}, +}; +MODULE_DEVICE_TABLE(of, rockchip_pinctrl_dt_match); + +static struct platform_driver rockchip_pinctrl_driver = { + .probe = rockchip_pinctrl_probe, + .driver = { + .name = "rockchip-pinctrl", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rockchip_pinctrl_dt_match), + }, +}; + +static int __init rockchip_pinctrl_drv_register(void) +{ + return platform_driver_register(&rockchip_pinctrl_driver); +} +postcore_initcall(rockchip_pinctrl_drv_register); + +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("Rockchip pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h new file mode 100644 index 000000000000..cd5788be82ce --- /dev/null +++ b/include/dt-bindings/pinctrl/rockchip.h @@ -0,0 +1,32 @@ +/* + * Header providing constants for Rockchip pinctrl bindings. + * + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__ +#define __DT_BINDINGS_ROCKCHIP_PINCTRL_H__ + +#define RK_GPIO0 0 +#define RK_GPIO1 1 +#define RK_GPIO2 2 +#define RK_GPIO3 3 +#define RK_GPIO4 4 +#define RK_GPIO6 6 + +#define RK_FUNC_GPIO 0 +#define RK_FUNC_1 1 +#define RK_FUNC_2 2 + +#endif -- cgit v1.2.3 From 30cf821ea807018898c7c37a8168a705d49b333f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 16 Jun 2013 12:15:36 +0200 Subject: pinctrl: update GPIO range doc This updates the GPIO range documentation with the API changes for sparse/random/arbitrary pin-to-GPIO mappings. Reviewed-by: Christian Ruppert Acked-by: Rob Landley Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index f6e664b6e36b..3ee24759be0f 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -350,6 +350,23 @@ chip b: - GPIO range : [48 .. 55] - pin range : [64 .. 71] +The above examples assume the mapping between the GPIOs and pins is +linear. If the mapping is sparse or haphazard, an array of arbitrary pin +numbers can be encoded in the range like this: + +static const unsigned range_pins[] = { 14, 1, 22, 17, 10, 8, 6, 2 }; + +static struct pinctrl_gpio_range gpio_range = { + .name = "chip", + .id = 0, + .base = 32, + .pins = &range_pins, + .npins = ARRAY_SIZE(range_pins), + .gc = &chip; +}; + +In this case the pin_base property will be ignored. + When GPIO-specific functions in the pin control subsystem are called, these ranges will be used to look up the appropriate pin controller by inspecting and matching the pin to the pin ranges across all controllers. When a @@ -357,9 +374,9 @@ pin controller handling the matching range is found, GPIO-specific functions will be called on that specific pin controller. For all functionalities dealing with pin biasing, pin muxing etc, the pin -controller subsystem will subtract the range's .base offset from the passed -in gpio number, and add the ranges's .pin_base offset to retrive a pin number. -After that, the subsystem passes it on to the pin control driver, so the driver +controller subsystem will look up the corresponding pin number from the passed +in gpio number, and use the range's internals to retrive a pin number. After +that, the subsystem passes it on to the pin control driver, so the driver will get an pin number into its handled number range. Further it is also passed the range ID value, so that the pin controller knows which range it should deal with. @@ -368,6 +385,7 @@ Calling pinctrl_add_gpio_range from pinctrl driver is DEPRECATED. Please see section 2.1 of Documentation/devicetree/bindings/gpio/gpio.txt on how to bind pinctrl and gpio drivers. + PINMUX interfaces ================= -- cgit v1.2.3 From 9ee1f7d266aa1e2bfeb20cb5d4ac299c8e8ef8c7 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Fri, 14 Jun 2013 17:42:49 +0200 Subject: pinctrl: clarify some dt pinconfig options The bias-pull-* options use values > 0 to indicate that the pull should be activated and optionally also indicate the strength of the pull. Therefore use an default value of 1 for these options. Split the low-power-mode option into low-power-enable and -disable. Update the documentation to describe the param arguments better. Reported-by: James Hogan Signed-off-by: Heiko Stuebner Signed-off-by: Linus Walleij --- .../bindings/pinctrl/pinctrl-bindings.txt | 22 +++++++++++++++++++++- drivers/pinctrl/pinconf-generic.c | 9 +++++---- 2 files changed, 26 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index ef7cd572214c..2d730e3dd496 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -158,9 +158,29 @@ input-schmitt - run in schmitt-trigger mode with hysteresis X input-debounce - debounce mode with debound time X power-source - select power source X slew-rate - use slew-rate X -low-power-mode - low power mode +low-power-enable - enable low power mode +low-power-disable - disable low power mode output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +Arguments for parameters: + +- bias-pull-up, -down and -pin-default take as optional argument 0 to disable + the pull, on hardware supporting it the pull strength in Ohm. bias-disable + will also disable any active pull. + +- drive-strength takes as argument the target strength in mA. + +- input-schmitt takes as argument the adjustable hysteresis in a + driver-specific format + +- input-debounce takes the debounce time as argument or 0 to disable debouncing + +- power-source argument is the custom value describing the source to select + +- slew-rate takes as argument the target rate in a driver-specific format + +All parameters not listed here, do not take an argument. + More in-depth documentation on these parameters can be found in diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index d3c693c0c250..dcf03714de90 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -152,9 +152,9 @@ static struct pinconf_generic_dt_params dt_params[] = { { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, { "bias-high-impedance", PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 }, { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, - { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 0 }, - { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 0 }, - { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 0 }, + { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, + { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, + { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, { "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 }, { "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 }, { "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 }, @@ -165,7 +165,8 @@ static struct pinconf_generic_dt_params dt_params[] = { { "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, - { "low-power-mode", PIN_CONFIG_LOW_POWER_MODE, 0 }, + { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, + { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "output-high", PIN_CONFIG_OUTPUT, 1, }, }; -- cgit v1.2.3 From fe1c9a822ce72c6ec8476a2501c412265ee2172c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 17 Jun 2013 20:50:02 +0200 Subject: sh-pfc: Add DT support Support device instantiation through the device tree. The compatible property is used to select the SoC pinmux information. Set the gpio_chip device field to the PFC device to enable automatic GPIO OF support. Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Laurent Pinchart Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- .../bindings/pinctrl/renesas,pfc-pinctrl.txt | 135 +++++++++++++++++++++ drivers/pinctrl/sh-pfc/core.c | 64 +++++++++- drivers/pinctrl/sh-pfc/pinctrl.c | 116 ++++++++++++++++++ 3 files changed, 314 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt new file mode 100644 index 000000000000..8264cbcdd418 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -0,0 +1,135 @@ +* Renesas Pin Function Controller (GPIO and Pin Mux/Config) + +The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH7372, +SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller. + + +Pin Control +----------- + +Required Properties: + + - compatible: should be one of the following. + - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller. + - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller. + - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller. + - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. + - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. + - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller. + - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. + + - reg: Base address and length of each memory resource used by the pin + controller hardware module. + +Optional properties: + + - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden + otherwise. Should be 3. + +The PFC node also acts as a container for pin configuration nodes. Please refer +to pinctrl-bindings.txt in this directory for the definition of the term "pin +configuration node" and for the common pinctrl bindings used by client devices. + +Each pin configuration node represents desired functions to select on a pin +group or a list of pin groups. The functions and pin groups can be specified +directly in the pin configuration node, or grouped in child subnodes. Several +functions can thus be referenced as a single pin configuration node by client +devices. + +A configuration node or subnode must contain a function and reference at least +one pin group. + +All pin configuration nodes and subnodes names are ignored. All of those nodes +are parsed through phandles and processed purely based on their content. + +Pin Configuration Node Properties: + +- renesas,groups : An array of strings, each string containing the name of a pin + group. + +- renesas,function: A string containing the name of the function to mux to the + pin group(s) specified by the renesas,groups property + + Valid values for pin, group and function names can be found in the group and + function arrays of the PFC data file corresponding to the SoC + (drivers/pinctrl/sh-pfc/pfc-*.c) + + +GPIO +---- + +On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller +node. + +Required Properties: + + - gpio-controller: Marks the device node as a gpio controller. + + - #gpio-cells: Should be 2. The first cell is the GPIO number and the second + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + +The syntax of the gpio specifier used by client nodes should be the following +with values derived from the SoC user manual. + + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [flags]> + +On other mach-shmobile platforms GPIO is handled by the gpio-rcar driver. +Please refer to Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +for documentation of the GPIO device tree bindings on those platforms. + + +Examples +-------- + +Example 1: SH73A0 (SH-Mobile AG5) pin controller node + + pfc: pfc@e6050000 { + compatible = "renesas,pfc-sh73a0"; + reg = <0xe6050000 0x8000>, + <0xe605801c 0x1c>; + gpio-controller; + #gpio-cells = <2>; + }; + +Example 2: A GPIO LED node that references a GPIO + + #include + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&pfc 20 GPIO_ACTIVE_LOW>; + }; + }; + +Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps + for the MMCIF and SCIFA4 devices + + &pfc { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + mmcif_pins: mmcif { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + + scifa4_pins: scifa4 { + renesas,groups = "scifa4_data", "scifa4_ctrl"; + renesas,function = "scifa4"; + }; + }; + +Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device + + &mmcif { + pinctrl-0 = <&mmcif_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; + }; diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c index 13f40c59ebfb..4eea849a1ad8 100644 --- a/drivers/pinctrl/sh-pfc/core.c +++ b/drivers/pinctrl/sh-pfc/core.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include @@ -348,13 +350,72 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id sh_pfc_of_table[] = { +#ifdef CONFIG_PINCTRL_PFC_R8A73A4 + { + .compatible = "renesas,pfc-r8a73a4", + .data = &r8a73a4_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_R8A7740 + { + .compatible = "renesas,pfc-r8a7740", + .data = &r8a7740_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_R8A7778 + { + .compatible = "renesas,pfc-r8a7778", + .data = &r8a7778_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_R8A7779 + { + .compatible = "renesas,pfc-r8a7779", + .data = &r8a7779_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_R8A7790 + { + .compatible = "renesas,pfc-r8a7790", + .data = &r8a7790_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_SH7372 + { + .compatible = "renesas,pfc-sh7372", + .data = &sh7372_pinmux_info, + }, +#endif +#ifdef CONFIG_PINCTRL_PFC_SH73A0 + { + .compatible = "renesas,pfc-sh73a0", + .data = &sh73a0_pinmux_info, + }, +#endif + { }, +}; +MODULE_DEVICE_TABLE(of, sh_pfc_of_table); +#endif + static int sh_pfc_probe(struct platform_device *pdev) { + const struct platform_device_id *platid = platform_get_device_id(pdev); +#ifdef CONFIG_OF + struct device_node *np = pdev->dev.of_node; +#endif const struct sh_pfc_soc_info *info; struct sh_pfc *pfc; int ret; - info = (void *)pdev->id_entry->driver_data; +#ifdef CONFIG_OF + if (np) + info = of_match_device(sh_pfc_of_table, &pdev->dev)->data; + else +#endif + info = platid ? (const void *)platid->driver_data : NULL; + if (info == NULL) return -ENODEV; @@ -480,6 +541,7 @@ static struct platform_driver sh_pfc_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sh_pfc_of_table), }, }; diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c index 3492ec9a33b7..7e32bb8c08dd 100644 --- a/drivers/pinctrl/sh-pfc/pinctrl.c +++ b/drivers/pinctrl/sh-pfc/pinctrl.c @@ -14,7 +14,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -72,11 +74,125 @@ static void sh_pfc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, seq_printf(s, "%s", DRV_NAME); } +static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps, unsigned int *index) +{ + struct pinctrl_map *maps = *map; + unsigned int nmaps = *num_maps; + unsigned int idx = *index; + const char *function = NULL; + struct property *prop; + const char *group; + int ret; + + /* Parse the function and configuration properties. At least a function + * or one configuration must be specified. + */ + ret = of_property_read_string(np, "renesas,function", &function); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "Invalid function in DT\n"); + return ret; + } + + if (!function) { + dev_err(dev, "DT node must contain at least one function\n"); + goto done; + } + + /* Count the number of groups and reallocate mappings. */ + ret = of_property_count_strings(np, "renesas,groups"); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "Invalid pin groups list in DT\n"); + goto done; + } + + if (!ret) { + dev_err(dev, "No group provided in DT node\n"); + ret = -ENODEV; + goto done; + } + + nmaps += ret; + + maps = krealloc(maps, sizeof(*maps) * nmaps, GFP_KERNEL); + if (maps == NULL) { + ret = -ENOMEM; + goto done; + } + + *map = maps; + *num_maps = nmaps; + + /* Iterate over pins and groups and create the mappings. */ + of_property_for_each_string(np, "renesas,groups", prop, group) { + maps[idx].type = PIN_MAP_TYPE_MUX_GROUP; + maps[idx].data.mux.group = group; + maps[idx].data.mux.function = function; + idx++; + } + + ret = 0; + +done: + *index = idx; + return ret; +} + +static void sh_pfc_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + kfree(map); +} + +static int sh_pfc_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); + struct device *dev = pmx->pfc->dev; + struct device_node *child; + unsigned int index; + int ret; + + *map = NULL; + *num_maps = 0; + index = 0; + + for_each_child_of_node(np, child) { + ret = sh_pfc_dt_subnode_to_map(dev, child, map, num_maps, + &index); + if (ret < 0) + goto done; + } + + /* If no mapping has been found in child nodes try the config node. */ + if (*num_maps == 0) { + ret = sh_pfc_dt_subnode_to_map(dev, np, map, num_maps, &index); + if (ret < 0) + goto done; + } + + if (*num_maps) + return 0; + + dev_err(dev, "no mapping found in node %s\n", np->full_name); + ret = -EINVAL; + +done: + if (ret < 0) + sh_pfc_dt_free_map(pctldev, *map, *num_maps); + + return ret; +} + static const struct pinctrl_ops sh_pfc_pinctrl_ops = { .get_groups_count = sh_pfc_get_groups_count, .get_group_name = sh_pfc_get_group_name, .get_group_pins = sh_pfc_get_group_pins, .pin_dbg_show = sh_pfc_pin_dbg_show, + .dt_node_to_map = sh_pfc_dt_node_to_map, + .dt_free_map = sh_pfc_dt_free_map, }; static int sh_pfc_get_functions_count(struct pinctrl_dev *pctldev) -- cgit v1.2.3 From 12f3ad8df7f58c61ff16ea851541583693d965e1 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 17 Jun 2013 20:50:03 +0200 Subject: sh-pfc: Add pinconf support to DT bindings Signed-off-by: Laurent Pinchart Acked-by: Heiko Stuebner Signed-off-by: Linus Walleij --- .../bindings/pinctrl/renesas,pfc-pinctrl.txt | 36 +++++-- drivers/pinctrl/sh-pfc/pinctrl.c | 109 ++++++++++++++++++--- 2 files changed, 124 insertions(+), 21 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 8264cbcdd418..d5dac7b843a9 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -30,20 +30,27 @@ The PFC node also acts as a container for pin configuration nodes. Please refer to pinctrl-bindings.txt in this directory for the definition of the term "pin configuration node" and for the common pinctrl bindings used by client devices. -Each pin configuration node represents desired functions to select on a pin -group or a list of pin groups. The functions and pin groups can be specified -directly in the pin configuration node, or grouped in child subnodes. Several -functions can thus be referenced as a single pin configuration node by client -devices. +Each pin configuration node represents a desired configuration for a pin, a +pin group, or a list of pins or pin groups. The configuration can include the +function to select on those pin(s) and pin configuration parameters (such as +pull-up and pull-down). -A configuration node or subnode must contain a function and reference at least -one pin group. +Pin configuration nodes contain pin configuration properties, either directly +or grouped in child subnodes. Both pin muxing and configuration parameters can +be grouped in that way and referenced as a single pin configuration node by +client devices. + +A configuration node or subnode must reference at least one pin (through the +pins or pin groups properties) and contain at least a function or one +configuration parameter. When the function is present only pin groups can be +used to reference pins. All pin configuration nodes and subnodes names are ignored. All of those nodes are parsed through phandles and processed purely based on their content. Pin Configuration Node Properties: +- renesas,pins : An array of strings, each string containing the name of a pin. - renesas,groups : An array of strings, each string containing the name of a pin group. @@ -54,6 +61,10 @@ Pin Configuration Node Properties: function arrays of the PFC data file corresponding to the SoC (drivers/pinctrl/sh-pfc/pfc-*.c) +The pin configuration parameters use the generic pinconf bindings defined in +pinctrl-bindings.txt in this directory. The supported parameters are +bias-disable, bias-pull-up and bias-pull-down. + GPIO ---- @@ -113,8 +124,15 @@ Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps pinctrl-names = "default"; mmcif_pins: mmcif { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; + mux { + renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; + renesas,function = "mmc0"; + }; + cfg { + renesas,groups = "mmc0_data8_0"; + renesas,pins = "PORT279"; + bias-pull-up; + }; }; scifa4_pins: scifa4 { diff --git a/drivers/pinctrl/sh-pfc/pinctrl.c b/drivers/pinctrl/sh-pfc/pinctrl.c index 7e32bb8c08dd..2cf23476adf8 100644 --- a/drivers/pinctrl/sh-pfc/pinctrl.c +++ b/drivers/pinctrl/sh-pfc/pinctrl.c @@ -74,6 +74,27 @@ static void sh_pfc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, seq_printf(s, "%s", DRV_NAME); } +static int sh_pfc_map_add_config(struct pinctrl_map *map, + const char *group_or_pin, + enum pinctrl_map_type type, + unsigned long *configs, + unsigned int num_configs) +{ + unsigned long *cfgs; + + cfgs = kmemdup(configs, num_configs * sizeof(*cfgs), + GFP_KERNEL); + if (cfgs == NULL) + return -ENOMEM; + + map->type = type; + map->data.configs.group_or_pin = group_or_pin; + map->data.configs.configs = cfgs; + map->data.configs.num_configs = num_configs; + + return 0; +} + static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np, struct pinctrl_map **map, unsigned int *num_maps, unsigned int *index) @@ -81,9 +102,14 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np, struct pinctrl_map *maps = *map; unsigned int nmaps = *num_maps; unsigned int idx = *index; + unsigned int num_configs; const char *function = NULL; + unsigned long *configs; struct property *prop; + unsigned int num_groups; + unsigned int num_pins; const char *group; + const char *pin; int ret; /* Parse the function and configuration properties. At least a function @@ -95,25 +121,47 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np, return ret; } - if (!function) { - dev_err(dev, "DT node must contain at least one function\n"); + ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs); + if (ret < 0) + return ret; + + if (!function && num_configs == 0) { + dev_err(dev, + "DT node must contain at least a function or config\n"); goto done; } - /* Count the number of groups and reallocate mappings. */ + /* Count the number of pins and groups and reallocate mappings. */ + ret = of_property_count_strings(np, "renesas,pins"); + if (ret == -EINVAL) { + num_pins = 0; + } else if (ret < 0) { + dev_err(dev, "Invalid pins list in DT\n"); + goto done; + } else { + num_pins = ret; + } + ret = of_property_count_strings(np, "renesas,groups"); - if (ret < 0 && ret != -EINVAL) { + if (ret == -EINVAL) { + num_groups = 0; + } else if (ret < 0) { dev_err(dev, "Invalid pin groups list in DT\n"); goto done; + } else { + num_groups = ret; } - if (!ret) { - dev_err(dev, "No group provided in DT node\n"); + if (!num_pins && !num_groups) { + dev_err(dev, "No pin or group provided in DT node\n"); ret = -ENODEV; goto done; } - nmaps += ret; + if (function) + nmaps += num_groups; + if (configs) + nmaps += num_pins + num_groups; maps = krealloc(maps, sizeof(*maps) * nmaps, GFP_KERNEL); if (maps == NULL) { @@ -126,22 +174,59 @@ static int sh_pfc_dt_subnode_to_map(struct device *dev, struct device_node *np, /* Iterate over pins and groups and create the mappings. */ of_property_for_each_string(np, "renesas,groups", prop, group) { - maps[idx].type = PIN_MAP_TYPE_MUX_GROUP; - maps[idx].data.mux.group = group; - maps[idx].data.mux.function = function; - idx++; + if (function) { + maps[idx].type = PIN_MAP_TYPE_MUX_GROUP; + maps[idx].data.mux.group = group; + maps[idx].data.mux.function = function; + idx++; + } + + if (configs) { + ret = sh_pfc_map_add_config(&maps[idx], group, + PIN_MAP_TYPE_CONFIGS_GROUP, + configs, num_configs); + if (ret < 0) + goto done; + + idx++; + } } - ret = 0; + if (!configs) { + ret = 0; + goto done; + } + + of_property_for_each_string(np, "renesas,pins", prop, pin) { + ret = sh_pfc_map_add_config(&maps[idx], pin, + PIN_MAP_TYPE_CONFIGS_PIN, + configs, num_configs); + if (ret < 0) + goto done; + + idx++; + } done: *index = idx; + kfree(configs); return ret; } static void sh_pfc_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps) { + unsigned int i; + + if (map == NULL) + return; + + for (i = 0; i < num_maps; ++i) { + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP || + map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + } + kfree(map); } -- cgit v1.2.3 From 64a45c986349a00f0d4c96c0daeecdea76e31a96 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Thu, 20 Jun 2013 16:04:59 +0200 Subject: pinctrl: abx500: Add device tree support We use the same way to define pin muxing and pin configuration than for nomadik. So pickup code from pinctrl_nomadik.c to be able to implement pin multiplexing and pin configuration using the device tree. Pin configuration uses generic parsing code. Signed-off-by: Gabriel Fernandez Signed-off-by: Patrice Chotard Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/ste,abx500.txt | 352 +++++++++++++++++++++ drivers/pinctrl/pinctrl-abx500.c | 184 +++++++++++ 2 files changed, 536 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/ste,abx500.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt new file mode 100644 index 000000000000..e3865e136067 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt @@ -0,0 +1,352 @@ +ST Ericsson abx500 pinmux controller + +Required properties: +- compatible: "stericsson,ab8500-gpio", "stericsson,ab8540-gpio", + "stericsson,ab8505-gpio", "stericsson,ab9540-gpio", + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +ST Ericsson's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as input, output, pull up, pull down... + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Required subnode-properties: +- ste,pins : An array of strings. Each string contains the name of a pin or + group. + +Optional subnode-properties: +- ste,function: A string containing the name of the function to mux to the + pin or group. + +- generic pin configuration option to use. Example : + + default_cfg { + ste,pins = "GPIO1"; + bias-disable; + }; + +- ste,config: Handle of pin configuration node containing the generic + pinconfig options to use, as described in pinctrl-bindings.txt in + this directory. Example : + + pcfg_bias_disable: pcfg_bias_disable { + bias-disable; + }; + + default_cfg { + ste,pins = "GPIO1"; + ste.config = <&pcfg_bias_disable>; + }; + +Example board file extract: + +&pinctrl_abx500 { + pinctrl-names = "default"; + pinctrl-0 = <&sysclkreq2_default_mode>, <&sysclkreq3_default_mode>, <&gpio3_default_mode>, <&sysclkreq6_default_mode>, <&pwmout1_default_mode>, <&pwmout2_default_mode>, <&pwmout3_default_mode>, <&adi1_default_mode>, <&dmic12_default_mode>, <&dmic34_default_mode>, <&dmic56_default_mode>, <&sysclkreq5_default_mode>, <&batremn_default_mode>, <&service_default_mode>, <&pwrctrl0_default_mode>, <&pwrctrl1_default_mode>, <&pwmextvibra1_default_mode>, <&pwmextvibra2_default_mode>, <&gpio51_default_mode>, <&gpio52_default_mode>, <&gpio53_default_mode>, <&gpio54_default_mode>, <&pdmclkdat_default_mode>; + + sysclkreq2 { + sysclkreq2_default_mode: sysclkreq2_default { + default_mux { + ste,function = "sysclkreq"; + ste,pins = "sysclkreq2_d_1"; + }; + default_cfg { + ste,pins = "GPIO1"; + bias-disable; + }; + }; + }; + sysclkreq3 { + sysclkreq3_default_mode: sysclkreq3_default { + default_mux { + ste,function = "sysclkreq"; + ste,pins = "sysclkreq3_d_1"; + }; + default_cfg { + ste,pins = "GPIO2"; + output-low; + }; + }; + }; + gpio3 { + gpio3_default_mode: gpio3_default { + default_mux { + ste,function = "gpio"; + ste,pins = "gpio3_a_1"; + }; + default_cfg { + ste,pins = "GPIO3"; + output-low; + }; + }; + }; + sysclkreq6 { + sysclkreq6_default_mode: sysclkreq6_default { + default_mux { + ste,function = "sysclkreq"; + ste,pins = "sysclkreq6_d_1"; + }; + default_cfg { + ste,pins = "GPIO4"; + bias-disable; + }; + }; + }; + pwmout1 { + pwmout1_default_mode: pwmout1_default { + default_mux { + ste,function = "pwmout"; + ste,pins = "pwmout1_d_1"; + }; + default_cfg { + ste,pins = "GPIO14"; + output-low; + }; + }; + }; + pwmout2 { + pwmout2_default_mode: pwmout2_default { + pwmout2_default_mux { + ste,function = "pwmout"; + ste,pins = "pwmout2_d_1"; + }; + pwmout2_default_cfg { + ste,pins = "GPIO15"; + output-low; + }; + }; + }; + pwmout3 { + pwmout3_default_mode: pwmout3_default { + pwmout3_default_mux { + ste,function = "pwmout"; + ste,pins = "pwmout3_d_1"; + }; + pwmout3_default_cfg { + ste,pins = "GPIO16"; + output-low; + }; + }; + }; + adi1 { + + adi1_default_mode: adi1_default { + adi1_default_mux { + ste,function = "adi1"; + ste,pins = "adi1_d_1"; + }; + adi1_default_cfg1 { + ste,pins = "GPIO17","GPIO19","GPIO20"; + bias-disable; + }; + adi1_default_cfg2 { + ste,pins = "GPIO18"; + output-low; + }; + }; + }; + dmic12 { + dmic12_default_mode: dmic12_default { + dmic12_default_mux { + ste,function = "dmic"; + ste,pins = "dmic12_d_1"; + }; + dmic12_default_cfg1 { + ste,pins = "GPIO27"; + output-low; + }; + dmic12_default_cfg2 { + ste,pins = "GPIO28"; + bias-disable; + }; + }; + }; + dmic34 { + dmic34_default_mode: dmic34_default { + dmic34_default_mux { + ste,function = "dmic"; + ste,pins = "dmic34_d_1"; + }; + dmic34_default_cfg1 { + ste,pins = "GPIO29"; + output-low; + }; + dmic34_default_cfg2 { + ste,pins = "GPIO30"; + bias-disable;{ + + }; + }; + }; + dmic56 { + dmic56_default_mode: dmic56_default { + dmic56_default_mux { + ste,function = "dmic"; + ste,pins = "dmic56_d_1"; + }; + dmic56_default_cfg1 { + ste,pins = "GPIO31"; + output-low; + }; + dmic56_default_cfg2 { + ste,pins = "GPIO32"; + bias-disable; + }; + }; + }; + sysclkreq5 { + sysclkreq5_default_mode: sysclkreq5_default { + sysclkreq5_default_mux { + ste,function = "sysclkreq"; + ste,pins = "sysclkreq5_d_1"; + }; + sysclkreq5_default_cfg { + ste,pins = "GPIO42"; + output-low; + }; + }; + }; + batremn { + batremn_default_mode: batremn_default { + batremn_default_mux { + ste,function = "batremn"; + ste,pins = "batremn_d_1"; + }; + batremn_default_cfg { + ste,pins = "GPIO43"; + bias-disable; + }; + }; + }; + service { + service_default_mode: service_default { + service_default_mux { + ste,function = "service"; + ste,pins = "service_d_1"; + }; + service_default_cfg { + ste,pins = "GPIO44"; + bias-disable; + }; + }; + }; + pwrctrl0 { + pwrctrl0_default_mux: pwrctrl0_mux { + pwrctrl0_default_mux { + ste,function = "pwrctrl"; + ste,pins = "pwrctrl0_d_1"; + }; + }; + pwrctrl0_default_mode: pwrctrl0_default { + pwrctrl0_default_cfg { + ste,pins = "GPIO45"; + bias-disable; + }; + }; + }; + pwrctrl1 { + pwrctrl1_default_mux: pwrctrl1_mux { + pwrctrl1_default_mux { + ste,function = "pwrctrl"; + ste,pins = "pwrctrl1_d_1"; + }; + }; + pwrctrl1_default_mode: pwrctrl1_default { + pwrctrl1_default_cfg { + ste,pins = "GPIO46"; + bias-disable; + }; + }; + }; + pwmextvibra1 { + pwmextvibra1_default_mode: pwmextvibra1_default { + pwmextvibra1_default_mux { + ste,function = "pwmextvibra"; + ste,pins = "pwmextvibra1_d_1"; + }; + pwmextvibra1_default_cfg { + ste,pins = "GPIO47"; + bias-disable; + }; + }; + }; + pwmextvibra2 { + pwmextvibra2_default_mode: pwmextvibra2_default { + pwmextvibra2_default_mux { + ste,function = "pwmextvibra"; + ste,pins = "pwmextvibra2_d_1"; + }; + pwmextvibra1_default_cfg { + ste,pins = "GPIO48"; + bias-disable; + }; + }; + }; + gpio51 { + gpio51_default_mode: gpio51_default { + gpio51_default_mux { + ste,function = "gpio"; + ste,pins = "gpio51_a_1"; + }; + gpio51_default_cfg { + ste,pins = "GPIO51"; + output-low; + }; + }; + }; + gpio52 { + gpio52_default_mode: gpio52_default { + gpio52_default_mux { + ste,function = "gpio"; + ste,pins = "gpio52_a_1"; + }; + gpio52_default_cfg { + ste,pins = "GPIO52"; + bias-pull-down; + }; + }; + }; + gpio53 { + gpio53_default_mode: gpio53_default { + gpio53_default_mux { + ste,function = "gpio"; + ste,pins = "gpio53_a_1"; + }; + gpio53_default_cfg { + ste,pins = "GPIO53"; + bias-pull-down; + }; + }; + }; + gpio54 { + gpio54_default_mode: gpio54_default { + gpio54_default_mux { + ste,function = "gpio"; + ste,pins = "gpio54_a_1"; + }; + gpio54_default_cfg { + ste,pins = "GPIO54"; + output-low; + }; + }; + }; + pdmclkdat { + pdmclkdat_default_mode: pdmclkdat_default { + pdmclkdat_default_mux { + ste,function = "pdm"; + ste,pins = "pdmclkdat_d_1"; + }; + pdmclkdat_default_cfg { + ste,pins = "GPIO55", "GPIO56"; + bias-disable; + }; + }; + }; +}; diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c index 84b40f77b944..f13a57b13b05 100644 --- a/drivers/pinctrl/pinctrl-abx500.c +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -30,8 +30,10 @@ #include #include #include +#include #include "pinctrl-abx500.h" +#include "pinconf.h" /* * The AB9540 and AB8540 GPIO support are extended versions @@ -757,11 +759,193 @@ static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev, chip->base + offset - 1); } +static void abx500_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + kfree(map); +} + +static int abx500_dt_reserve_map(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, + unsigned reserve) +{ + unsigned old_num = *reserved_maps; + unsigned new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int abx500_dt_add_map_mux(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, const char *group, + const char *function) +{ + if (*num_maps == *reserved_maps) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int abx500_dt_add_map_configs(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, const char *group, + unsigned long *configs, unsigned num_configs) +{ + unsigned long *dup_configs; + + if (*num_maps == *reserved_maps) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) + return -ENOMEM; + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN; + + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev, + const char *pin_name) +{ + int i, pin_number; + struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1) + for (i = 0; i < npct->soc->npins; i++) + if (npct->soc->pins[i].number == pin_number) + return npct->soc->pins[i].name; + return NULL; +} + +static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps) +{ + int ret; + const char *function = NULL; + unsigned long *configs; + unsigned int nconfigs = 0; + bool has_config = 0; + unsigned reserve = 0; + struct property *prop; + const char *group, *gpio_name; + struct device_node *np_config; + + ret = of_property_read_string(np, "ste,function", &function); + if (ret >= 0) + reserve = 1; + + ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs); + if (nconfigs) + has_config = 1; + + np_config = of_parse_phandle(np, "ste,config", 0); + if (np_config) { + ret = pinconf_generic_parse_dt_config(np_config, &configs, + &nconfigs); + if (ret) + goto exit; + has_config |= nconfigs; + } + + ret = of_property_count_strings(np, "ste,pins"); + if (ret < 0) + goto exit; + + if (has_config) + reserve++; + + reserve *= ret; + + ret = abx500_dt_reserve_map(map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "ste,pins", prop, group) { + if (function) { + ret = abx500_dt_add_map_mux(map, reserved_maps, + num_maps, group, function); + if (ret < 0) + goto exit; + } + if (has_config) { + gpio_name = abx500_find_pin_name(pctldev, group); + + ret = abx500_dt_add_map_configs(map, reserved_maps, + num_maps, gpio_name, configs, 1); + if (ret < 0) + goto exit; + } + + } +exit: + return ret; +} + +static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + unsigned reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = abx500_dt_subnode_to_map(pctldev, np, map, + &reserved_maps, num_maps); + if (ret < 0) { + abx500_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + static const struct pinctrl_ops abx500_pinctrl_ops = { .get_groups_count = abx500_get_groups_cnt, .get_group_name = abx500_get_group_name, .get_group_pins = abx500_get_group_pins, .pin_dbg_show = abx500_pin_dbg_show, + .dt_node_to_map = abx500_dt_node_to_map, + .dt_free_map = abx500_dt_free_map, }; static int abx500_pin_config_get(struct pinctrl_dev *pctldev, -- cgit v1.2.3 From d5025f9f535108ba44c7f00573a2a34c18a3ea2b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 20 Jun 2013 10:26:27 +0100 Subject: pinctrl-tz1090: add TZ1090 pinctrl driver Add a pin control driver for the main pins on the TZ1090 SoC. This doesn't include the low-power pins as they're controlled separately via the Powerdown Controller (PDC) registers. Signed-off-by: James Hogan Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Linus Walleij Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij --- .../bindings/pinctrl/img,tz1090-pinctrl.txt | 232 +++ drivers/pinctrl/Kconfig | 6 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-tz1090.c | 2077 ++++++++++++++++++++ 4 files changed, 2316 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-tz1090.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt new file mode 100644 index 000000000000..39bfd9cd6bba --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -0,0 +1,232 @@ +ImgTec TZ1090 pin controller + +Required properties: +- compatible: "img,tz1090-pinctrl" +- reg: Should contain the register physical address and length of the pad + configuration registers (CR_PADS_* and CR_IF_CTL0). + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +TZ1090's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. For this reason, even seemingly boolean +values are actually tristates in this binding: unspecified, off, or on. +Unspecified is represented as an absent property, and off/on are represented as +integer values 0 and 1. + +Required subnode-properties: +- tz1090,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- tz1090,function: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below, including + which pingroups can be muxed to them. +- supported generic pinconfig properties (for further details see + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt): + - bias-disable + - bias-high-impedance + - bias-bus-hold + - bias-pull-up + - bias-pull-down + - input-schmitt-enable + - input-schmitt-disable + - slew-rate: Integer, control slew rate of pins. + 0: slow (half frequency) + 1: fast + - drive-strength: Integer, control drive strength of pins in mA. + 2: 2mA + 4: 4mA + 8: 8mA + 12: 12mA + + +Note that many of these properties are only valid for certain specific pins +or groups. See the TZ1090 TRM for complete details regarding which groups +support which functionality. The Linux pinctrl driver may also be a useful +reference. + +Valid values for pin and group names are: + + gpio pins: + + These all support bias-high-impediance, bias-pull-up, bias-pull-down, and + bias-bus-hold (which can also be provided to any of the groups below to set + it for all pins in that group). + + They also all support the some form of muxing. Any pins which are contained + in one of the mux groups (see below) can be muxed only to the functions + supported by the mux group. All other pins can be muxed to the "perip" + function which which enables them with their intended peripheral. + + Different pins in the same mux group cannot be muxed to different functions, + however it is possible to mux only a subset of the pins in a mux group to a + particular function and leave the remaining pins unmuxed. This is useful if + the board connects certain pins in a group to other devices to be controlled + by GPIO, and you don't want the usual peripheral to have any control of the + pin. + + ant_sel0, ant_sel1, gain0, gain1, gain2, gain3, gain4, gain5, gain6, gain7, + i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, i2s_lrclk_out, + i2s_mclk, pa_on, pdm_a, pdm_b, pdm_c, pdm_d, pll_on, rx_hp, rx_on, + scb0_sclk, scb0_sdat, scb1_sclk, scb1_sdat, scb2_sclk, scb2_sdat, sdh_cd, + sdh_clk_in, sdh_wp, sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3, + spi0_cs0, spi0_cs1, spi0_cs2, spi0_din, spi0_dout, spi0_mclk, spi1_cs0, + spi1_cs1, spi1_cs2, spi1_din, spi1_dout, spi1_mclk, tft_blank_ls, tft_blue0, + tft_blue1, tft_blue2, tft_blue3, tft_blue4, tft_blue5, tft_blue6, tft_blue7, + tft_green0, tft_green1, tft_green2, tft_green3, tft_green4, tft_green5, + tft_green6, tft_green7, tft_hsync_nr, tft_panelclk, tft_pwrsave, tft_red0, + tft_red1, tft_red2, tft_red3, tft_red4, tft_red5, tft_red6, tft_red7, + tft_vd12acb, tft_vdden_gd, tft_vsync_ns, tx_on, uart0_cts, uart0_rts, + uart0_rxd, uart0_txd, uart1_rxd, uart1_txd. + + bias-high-impediance: supported. + bias-pull-up: supported. + bias-pull-down: supported. + bias-bus-hold: supported. + function: perip or those supported by pin's mux group. + + other pins: + + These other pins are part of various pin groups below, but can't be + controlled as GPIOs. They do however support bias-high-impediance, + bias-pull-up, bias-pull-down, and bias-bus-hold (which can also be provided + to any of the groups below to set it for all pins in that group). + + clk_out0, clk_out1, tck, tdi, tdo, tms, trst. + + bias-high-impediance: supported. + bias-pull-up: supported. + bias-pull-down: supported. + bias-bus-hold: supported. + + mux groups: + + These all support function, and some support drive configs. + + afe + pins: tx_on, rx_on, pll_on, pa_on, rx_hp, ant_sel0, + ant_sel1, gain0, gain1, gain2, gain3, gain4, + gain5, gain6, gain7. + function: afe, ts_out_0. + input-schmitt-enable: supported. + input-schmitt-disable: supported. + slew-rate: supported. + drive-strength: supported. + pdm_d + pins: pdm_d. + function: pdm_dac, usb_vbus. + sdh + pins: sdh_cd, sdh_wp, sdh_clk_in. + function: sdh, sdio. + sdio + pins: sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, + sdio_d3. + function: sdio, sdh. + spi1_cs2 + pins: spi1_cs2. + function: spi1_cs2, usb_vbus. + tft + pins: tft_red0, tft_red1, tft_red2, tft_red3, + tft_red4, tft_red5, tft_red6, tft_red7, + tft_green0, tft_green1, tft_green2, tft_green3, + tft_green4, tft_green5, tft_green6, tft_green7, + tft_blue0, tft_blue1, tft_blue2, tft_blue3, + tft_blue4, tft_blue5, tft_blue6, tft_blue7, + tft_vdden_gd, tft_panelclk, tft_blank_ls, + tft_vsync_ns, tft_hsync_nr, tft_vd12acb, + tft_pwrsave. + function: tft, ext_dac, not_iqadc_stb, iqdac_stb, ts_out_1, + lcd_trace, phy_ringosc. + input-schmitt-enable: supported. + input-schmitt-disable: supported. + slew-rate: supported. + drive-strength: supported. + + drive groups: + + These all support input-schmitt-enable, input-schmitt-disable, slew-rate, + and drive-strength. + + jtag + pins: tck, trst, tdi, tdo, tms. + scb1 + pins: scb1_sdat, scb1_sclk. + scb2 + pins: scb2_sdat, scb2_sclk. + spi0 + pins: spi0_mclk, spi0_cs0, spi0_cs1, spi0_cs2, spi0_dout, spi0_din. + spi1 + pins: spi1_mclk, spi1_cs0, spi1_cs1, spi1_cs2, spi1_dout, spi1_din. + uart + pins: uart0_txd, uart0_rxd, uart0_rts, uart0_cts, + uart1_txd, uart1_rxd. + drive_i2s + pins: clk_out1, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, + i2s_lrclk_out, i2s_bclk_out, i2s_mclk. + drive_pdm + pins: clk_out0, pdm_b, pdm_a. + drive_scb0 + pins: scb0_sclk, scb0_sdat, pdm_d, pdm_c. + drive_sdio + pins: sdio_clk, sdio_cmd, sdio_d0, sdio_d1, sdio_d2, sdio_d3, + sdh_wp, sdh_cd, sdh_clk_in. + + convenience groups: + + These are just convenient groupings of pins and don't support any drive + configs. + + uart0 + pins: uart0_cts, uart0_rts, uart0_rxd, uart0_txd. + uart1 + pins: uart1_rxd, uart1_txd. + scb0 + pins: scb0_sclk, scb0_sdat. + i2s + pins: i2s_bclk_out, i2s_din, i2s_dout0, i2s_dout1, i2s_dout2, + i2s_lrclk_out, i2s_mclk. + +Example: + + pinctrl: pinctrl@02005800 { + #gpio-range-cells = <3>; + compatible = "img,tz1090-pinctrl"; + reg = <0x02005800 0xe4>; + }; + +Example board file extract: + + &pinctrl { + uart0_default: uart0 { + uart0_cfg { + tz1090,pins = "uart0_rxd", + "uart0_txd"; + tz1090,function = "perip"; + }; + }; + tft_default: tft { + tft_cfg { + tz1090,pins = "tft"; + tz1090,function = "tft"; + }; + }; + }; + + uart@02004b00 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_default>; + }; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index e01976fb1175..acdaa08b325c 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -212,6 +212,12 @@ config PINCTRL_TEGRA114 bool select PINCTRL_TEGRA +config PINCTRL_TZ1090 + bool "Toumaz Xenif TZ1090 pin control driver" + depends on SOC_TZ1090 + select PINMUX + select GENERIC_PINCONF + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 9031afddb9ad..37ff29e1bba3 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o +obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c new file mode 100644 index 000000000000..02ff3a238168 --- /dev/null +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -0,0 +1,2077 @@ +/* + * Pinctrl driver for the Toumaz Xenif TZ1090 SoC + * + * Copyright (c) 2013, Imagination Technologies Ltd. + * + * Derived from Tegra code: + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * + * Derived from code: + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010 NVIDIA Corporation + * Copyright (C) 2009-2011 ST-Ericsson AB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The registers may be shared with other threads/cores, so we need to use the + * metag global lock2 for atomicity. + */ +#include + +#include "core.h" +#include "pinconf.h" + +/* Register offsets from bank base address */ +#define REG_PINCTRL_SELECT 0x10 +#define REG_PINCTRL_SCHMITT 0x90 +#define REG_PINCTRL_PU_PD 0xa0 +#define REG_PINCTRL_SR 0xc0 +#define REG_PINCTRL_DR 0xd0 +#define REG_PINCTRL_IF_CTL 0xe0 + +/* REG_PINCTRL_PU_PD field values */ +#define REG_PU_PD_TRISTATE 0 +#define REG_PU_PD_UP 1 +#define REG_PU_PD_DOWN 2 +#define REG_PU_PD_REPEATER 3 + +/* REG_PINCTRL_DR field values */ +#define REG_DR_2mA 0 +#define REG_DR_4mA 1 +#define REG_DR_8mA 2 +#define REG_DR_12mA 3 + +/** + * struct tz1090_function - TZ1090 pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct tz1090_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +/** + * struct tz1090_muxdesc - TZ1090 individual mux description + * @funcs: Function for each mux value. + * @reg: Mux register offset. 0 if unsupported. + * @bit: Mux register bit. 0 if unsupported. + * @width: Mux field width. 0 if unsupported. + * + * A representation of a group of signals (possibly just one signal) in the + * TZ1090 which can be muxed to a set of functions or sub muxes. + */ +struct tz1090_muxdesc { + int funcs[5]; + u16 reg; + u8 bit; + u8 width; +}; + +/** + * struct tz1090_pingroup - TZ1090 pin group + * @name: Name of pin group. + * @pins: Array of pin numbers in this pin group. + * @npins: Number of pins in this pin group. + * @mux: Top level mux. + * @drv: Drive control supported, 0 if unsupported. + * This means Schmitt, Slew, and Drive strength. + * @slw_bit: Slew register bit. 0 if unsupported. + * The same bit is used for Schmitt, and Drive (*2). + * @func: Currently muxed function. + * @func_count: Number of pins using current mux function. + * + * A representation of a group of pins (possibly just one pin) in the TZ1090 + * pin controller. Each group allows some parameter or parameters to be + * configured. The most common is mux function selection. + */ +struct tz1090_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + struct tz1090_muxdesc mux; + + bool drv; + u8 slw_bit; + + int func; + unsigned int func_count; +}; + +/* + * Most pins affected by the pinmux can also be GPIOs. Define these first. + * These must match how the GPIO driver names/numbers its pins. + */ + +enum tz1090_pin { + /* GPIO pins */ + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SPI0_MCLK, + TZ1090_PIN_SPI0_CS0, + TZ1090_PIN_SPI0_CS1, + TZ1090_PIN_SPI0_CS2, + TZ1090_PIN_SPI0_DOUT, + TZ1090_PIN_SPI0_DIN, + TZ1090_PIN_SPI1_MCLK, + TZ1090_PIN_SPI1_CS0, + TZ1090_PIN_SPI1_CS1, + TZ1090_PIN_SPI1_CS2, + TZ1090_PIN_SPI1_DOUT, + TZ1090_PIN_SPI1_DIN, + TZ1090_PIN_UART0_RXD, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART1_RXD, + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_SCB0_SCLK, + TZ1090_PIN_SCB1_SDAT, + TZ1090_PIN_SCB1_SCLK, + TZ1090_PIN_SCB2_SDAT, + TZ1090_PIN_SCB2_SCLK, + TZ1090_PIN_I2S_MCLK, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_DIN, + TZ1090_PIN_PDM_A, + TZ1090_PIN_PDM_B, + TZ1090_PIN_PDM_C, + TZ1090_PIN_PDM_D, + TZ1090_PIN_TFT_RED0, + TZ1090_PIN_TFT_RED1, + TZ1090_PIN_TFT_RED2, + TZ1090_PIN_TFT_RED3, + TZ1090_PIN_TFT_RED4, + TZ1090_PIN_TFT_RED5, + TZ1090_PIN_TFT_RED6, + TZ1090_PIN_TFT_RED7, + TZ1090_PIN_TFT_GREEN0, + TZ1090_PIN_TFT_GREEN1, + TZ1090_PIN_TFT_GREEN2, + TZ1090_PIN_TFT_GREEN3, + TZ1090_PIN_TFT_GREEN4, + TZ1090_PIN_TFT_GREEN5, + TZ1090_PIN_TFT_GREEN6, + TZ1090_PIN_TFT_GREEN7, + TZ1090_PIN_TFT_BLUE0, + TZ1090_PIN_TFT_BLUE1, + TZ1090_PIN_TFT_BLUE2, + TZ1090_PIN_TFT_BLUE3, + TZ1090_PIN_TFT_BLUE4, + TZ1090_PIN_TFT_BLUE5, + TZ1090_PIN_TFT_BLUE6, + TZ1090_PIN_TFT_BLUE7, + TZ1090_PIN_TFT_VDDEN_GD, + TZ1090_PIN_TFT_PANELCLK, + TZ1090_PIN_TFT_BLANK_LS, + TZ1090_PIN_TFT_VSYNC_NS, + TZ1090_PIN_TFT_HSYNC_NR, + TZ1090_PIN_TFT_VD12ACB, + TZ1090_PIN_TFT_PWRSAVE, + TZ1090_PIN_TX_ON, + TZ1090_PIN_RX_ON, + TZ1090_PIN_PLL_ON, + TZ1090_PIN_PA_ON, + TZ1090_PIN_RX_HP, + TZ1090_PIN_GAIN0, + TZ1090_PIN_GAIN1, + TZ1090_PIN_GAIN2, + TZ1090_PIN_GAIN3, + TZ1090_PIN_GAIN4, + TZ1090_PIN_GAIN5, + TZ1090_PIN_GAIN6, + TZ1090_PIN_GAIN7, + TZ1090_PIN_ANT_SEL0, + TZ1090_PIN_ANT_SEL1, + TZ1090_PIN_SDH_CLK_IN, + + /* Non-GPIO pins */ + TZ1090_PIN_TCK, + TZ1090_PIN_TRST, + TZ1090_PIN_TDI, + TZ1090_PIN_TDO, + TZ1090_PIN_TMS, + TZ1090_PIN_CLK_OUT0, + TZ1090_PIN_CLK_OUT1, + + NUM_GPIOS = TZ1090_PIN_TCK, +}; + +/* Pin names */ + +static const struct pinctrl_pin_desc tz1090_pins[] = { + /* GPIO pins */ + PINCTRL_PIN(TZ1090_PIN_SDIO_CLK, "sdio_clk"), + PINCTRL_PIN(TZ1090_PIN_SDIO_CMD, "sdio_cmd"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D0, "sdio_d0"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D1, "sdio_d1"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D2, "sdio_d2"), + PINCTRL_PIN(TZ1090_PIN_SDIO_D3, "sdio_d3"), + PINCTRL_PIN(TZ1090_PIN_SDH_CD, "sdh_cd"), + PINCTRL_PIN(TZ1090_PIN_SDH_WP, "sdh_wp"), + PINCTRL_PIN(TZ1090_PIN_SPI0_MCLK, "spi0_mclk"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS0, "spi0_cs0"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS1, "spi0_cs1"), + PINCTRL_PIN(TZ1090_PIN_SPI0_CS2, "spi0_cs2"), + PINCTRL_PIN(TZ1090_PIN_SPI0_DOUT, "spi0_dout"), + PINCTRL_PIN(TZ1090_PIN_SPI0_DIN, "spi0_din"), + PINCTRL_PIN(TZ1090_PIN_SPI1_MCLK, "spi1_mclk"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS0, "spi1_cs0"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS1, "spi1_cs1"), + PINCTRL_PIN(TZ1090_PIN_SPI1_CS2, "spi1_cs2"), + PINCTRL_PIN(TZ1090_PIN_SPI1_DOUT, "spi1_dout"), + PINCTRL_PIN(TZ1090_PIN_SPI1_DIN, "spi1_din"), + PINCTRL_PIN(TZ1090_PIN_UART0_RXD, "uart0_rxd"), + PINCTRL_PIN(TZ1090_PIN_UART0_TXD, "uart0_txd"), + PINCTRL_PIN(TZ1090_PIN_UART0_CTS, "uart0_cts"), + PINCTRL_PIN(TZ1090_PIN_UART0_RTS, "uart0_rts"), + PINCTRL_PIN(TZ1090_PIN_UART1_RXD, "uart1_rxd"), + PINCTRL_PIN(TZ1090_PIN_UART1_TXD, "uart1_txd"), + PINCTRL_PIN(TZ1090_PIN_SCB0_SDAT, "scb0_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB0_SCLK, "scb0_sclk"), + PINCTRL_PIN(TZ1090_PIN_SCB1_SDAT, "scb1_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB1_SCLK, "scb1_sclk"), + PINCTRL_PIN(TZ1090_PIN_SCB2_SDAT, "scb2_sdat"), + PINCTRL_PIN(TZ1090_PIN_SCB2_SCLK, "scb2_sclk"), + PINCTRL_PIN(TZ1090_PIN_I2S_MCLK, "i2s_mclk"), + PINCTRL_PIN(TZ1090_PIN_I2S_BCLK_OUT, "i2s_bclk_out"), + PINCTRL_PIN(TZ1090_PIN_I2S_LRCLK_OUT, "i2s_lrclk_out"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT0, "i2s_dout0"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT1, "i2s_dout1"), + PINCTRL_PIN(TZ1090_PIN_I2S_DOUT2, "i2s_dout2"), + PINCTRL_PIN(TZ1090_PIN_I2S_DIN, "i2s_din"), + PINCTRL_PIN(TZ1090_PIN_PDM_A, "pdm_a"), + PINCTRL_PIN(TZ1090_PIN_PDM_B, "pdm_b"), + PINCTRL_PIN(TZ1090_PIN_PDM_C, "pdm_c"), + PINCTRL_PIN(TZ1090_PIN_PDM_D, "pdm_d"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED0, "tft_red0"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED1, "tft_red1"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED2, "tft_red2"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED3, "tft_red3"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED4, "tft_red4"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED5, "tft_red5"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED6, "tft_red6"), + PINCTRL_PIN(TZ1090_PIN_TFT_RED7, "tft_red7"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN0, "tft_green0"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN1, "tft_green1"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN2, "tft_green2"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN3, "tft_green3"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN4, "tft_green4"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN5, "tft_green5"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN6, "tft_green6"), + PINCTRL_PIN(TZ1090_PIN_TFT_GREEN7, "tft_green7"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE0, "tft_blue0"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE1, "tft_blue1"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE2, "tft_blue2"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE3, "tft_blue3"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE4, "tft_blue4"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE5, "tft_blue5"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE6, "tft_blue6"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLUE7, "tft_blue7"), + PINCTRL_PIN(TZ1090_PIN_TFT_VDDEN_GD, "tft_vdden_gd"), + PINCTRL_PIN(TZ1090_PIN_TFT_PANELCLK, "tft_panelclk"), + PINCTRL_PIN(TZ1090_PIN_TFT_BLANK_LS, "tft_blank_ls"), + PINCTRL_PIN(TZ1090_PIN_TFT_VSYNC_NS, "tft_vsync_ns"), + PINCTRL_PIN(TZ1090_PIN_TFT_HSYNC_NR, "tft_hsync_nr"), + PINCTRL_PIN(TZ1090_PIN_TFT_VD12ACB, "tft_vd12acb"), + PINCTRL_PIN(TZ1090_PIN_TFT_PWRSAVE, "tft_pwrsave"), + PINCTRL_PIN(TZ1090_PIN_TX_ON, "tx_on"), + PINCTRL_PIN(TZ1090_PIN_RX_ON, "rx_on"), + PINCTRL_PIN(TZ1090_PIN_PLL_ON, "pll_on"), + PINCTRL_PIN(TZ1090_PIN_PA_ON, "pa_on"), + PINCTRL_PIN(TZ1090_PIN_RX_HP, "rx_hp"), + PINCTRL_PIN(TZ1090_PIN_GAIN0, "gain0"), + PINCTRL_PIN(TZ1090_PIN_GAIN1, "gain1"), + PINCTRL_PIN(TZ1090_PIN_GAIN2, "gain2"), + PINCTRL_PIN(TZ1090_PIN_GAIN3, "gain3"), + PINCTRL_PIN(TZ1090_PIN_GAIN4, "gain4"), + PINCTRL_PIN(TZ1090_PIN_GAIN5, "gain5"), + PINCTRL_PIN(TZ1090_PIN_GAIN6, "gain6"), + PINCTRL_PIN(TZ1090_PIN_GAIN7, "gain7"), + PINCTRL_PIN(TZ1090_PIN_ANT_SEL0, "ant_sel0"), + PINCTRL_PIN(TZ1090_PIN_ANT_SEL1, "ant_sel1"), + PINCTRL_PIN(TZ1090_PIN_SDH_CLK_IN, "sdh_clk_in"), + + /* Non-GPIO pins */ + PINCTRL_PIN(TZ1090_PIN_TCK, "tck"), + PINCTRL_PIN(TZ1090_PIN_TRST, "trst"), + PINCTRL_PIN(TZ1090_PIN_TDI, "tdi"), + PINCTRL_PIN(TZ1090_PIN_TDO, "tdo"), + PINCTRL_PIN(TZ1090_PIN_TMS, "tms"), + PINCTRL_PIN(TZ1090_PIN_CLK_OUT0, "clk_out0"), + PINCTRL_PIN(TZ1090_PIN_CLK_OUT1, "clk_out1"), +}; + +/* Pins in each pin group */ + +static const unsigned int spi1_cs2_pins[] = { + TZ1090_PIN_SPI1_CS2, +}; + +static const unsigned int pdm_d_pins[] = { + TZ1090_PIN_PDM_D, +}; + +static const unsigned int tft_pins[] = { + TZ1090_PIN_TFT_RED0, + TZ1090_PIN_TFT_RED1, + TZ1090_PIN_TFT_RED2, + TZ1090_PIN_TFT_RED3, + TZ1090_PIN_TFT_RED4, + TZ1090_PIN_TFT_RED5, + TZ1090_PIN_TFT_RED6, + TZ1090_PIN_TFT_RED7, + TZ1090_PIN_TFT_GREEN0, + TZ1090_PIN_TFT_GREEN1, + TZ1090_PIN_TFT_GREEN2, + TZ1090_PIN_TFT_GREEN3, + TZ1090_PIN_TFT_GREEN4, + TZ1090_PIN_TFT_GREEN5, + TZ1090_PIN_TFT_GREEN6, + TZ1090_PIN_TFT_GREEN7, + TZ1090_PIN_TFT_BLUE0, + TZ1090_PIN_TFT_BLUE1, + TZ1090_PIN_TFT_BLUE2, + TZ1090_PIN_TFT_BLUE3, + TZ1090_PIN_TFT_BLUE4, + TZ1090_PIN_TFT_BLUE5, + TZ1090_PIN_TFT_BLUE6, + TZ1090_PIN_TFT_BLUE7, + TZ1090_PIN_TFT_VDDEN_GD, + TZ1090_PIN_TFT_PANELCLK, + TZ1090_PIN_TFT_BLANK_LS, + TZ1090_PIN_TFT_VSYNC_NS, + TZ1090_PIN_TFT_HSYNC_NR, + TZ1090_PIN_TFT_VD12ACB, + TZ1090_PIN_TFT_PWRSAVE, +}; + +static const unsigned int afe_pins[] = { + TZ1090_PIN_TX_ON, + TZ1090_PIN_RX_ON, + TZ1090_PIN_PLL_ON, + TZ1090_PIN_PA_ON, + TZ1090_PIN_RX_HP, + TZ1090_PIN_ANT_SEL0, + TZ1090_PIN_ANT_SEL1, + TZ1090_PIN_GAIN0, + TZ1090_PIN_GAIN1, + TZ1090_PIN_GAIN2, + TZ1090_PIN_GAIN3, + TZ1090_PIN_GAIN4, + TZ1090_PIN_GAIN5, + TZ1090_PIN_GAIN6, + TZ1090_PIN_GAIN7, +}; + +static const unsigned int sdio_pins[] = { + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, +}; + +static const unsigned int sdh_pins[] = { + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SDH_CLK_IN, +}; + +static const unsigned int spi0_pins[] = { + TZ1090_PIN_SPI0_MCLK, + TZ1090_PIN_SPI0_CS0, + TZ1090_PIN_SPI0_CS1, + TZ1090_PIN_SPI0_CS2, + TZ1090_PIN_SPI0_DOUT, + TZ1090_PIN_SPI0_DIN, +}; + +static const unsigned int spi1_pins[] = { + TZ1090_PIN_SPI1_MCLK, + TZ1090_PIN_SPI1_CS0, + TZ1090_PIN_SPI1_CS1, + TZ1090_PIN_SPI1_CS2, + TZ1090_PIN_SPI1_DOUT, + TZ1090_PIN_SPI1_DIN, +}; + +static const unsigned int uart0_pins[] = { + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_RXD, +}; + +static const unsigned int uart1_pins[] = { + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_UART1_RXD, +}; + +static const unsigned int uart_pins[] = { + TZ1090_PIN_UART1_TXD, + TZ1090_PIN_UART1_RXD, + TZ1090_PIN_UART0_RTS, + TZ1090_PIN_UART0_CTS, + TZ1090_PIN_UART0_TXD, + TZ1090_PIN_UART0_RXD, +}; + +static const unsigned int scb0_pins[] = { + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_SCB0_SCLK, +}; + +static const unsigned int scb1_pins[] = { + TZ1090_PIN_SCB1_SDAT, + TZ1090_PIN_SCB1_SCLK, +}; + +static const unsigned int scb2_pins[] = { + TZ1090_PIN_SCB2_SDAT, + TZ1090_PIN_SCB2_SCLK, +}; + +static const unsigned int i2s_pins[] = { + TZ1090_PIN_I2S_MCLK, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_DIN, +}; + +static const unsigned int jtag_pins[] = { + TZ1090_PIN_TCK, + TZ1090_PIN_TRST, + TZ1090_PIN_TDI, + TZ1090_PIN_TDO, + TZ1090_PIN_TMS, +}; + +/* Pins in each drive pin group */ + +static const unsigned int drive_sdio_pins[] = { + TZ1090_PIN_SDIO_CLK, + TZ1090_PIN_SDIO_CMD, + TZ1090_PIN_SDIO_D0, + TZ1090_PIN_SDIO_D1, + TZ1090_PIN_SDIO_D2, + TZ1090_PIN_SDIO_D3, + TZ1090_PIN_SDH_WP, + TZ1090_PIN_SDH_CD, + TZ1090_PIN_SDH_CLK_IN, +}; + +static const unsigned int drive_i2s_pins[] = { + TZ1090_PIN_CLK_OUT1, + TZ1090_PIN_I2S_DIN, + TZ1090_PIN_I2S_DOUT0, + TZ1090_PIN_I2S_DOUT1, + TZ1090_PIN_I2S_DOUT2, + TZ1090_PIN_I2S_LRCLK_OUT, + TZ1090_PIN_I2S_BCLK_OUT, + TZ1090_PIN_I2S_MCLK, +}; + +static const unsigned int drive_scb0_pins[] = { + TZ1090_PIN_SCB0_SCLK, + TZ1090_PIN_SCB0_SDAT, + TZ1090_PIN_PDM_D, + TZ1090_PIN_PDM_C, +}; + +static const unsigned int drive_pdm_pins[] = { + TZ1090_PIN_CLK_OUT0, + TZ1090_PIN_PDM_B, + TZ1090_PIN_PDM_A, +}; + +/* Pin groups each function can be muxed to */ + +/* + * The magic "perip" function allows otherwise non-muxing pins to be enabled in + * peripheral mode. + */ +static const char * const perip_groups[] = { + /* non-muxing convenient gpio pingroups */ + "uart", + "uart0", + "uart1", + "spi0", + "spi1", + "scb0", + "scb1", + "scb2", + "i2s", + /* individual pins not part of a pin mux group */ + "spi0_mclk", + "spi0_cs0", + "spi0_cs1", + "spi0_cs2", + "spi0_dout", + "spi0_din", + "spi1_mclk", + "spi1_cs0", + "spi1_cs1", + "spi1_dout", + "spi1_din", + "uart0_rxd", + "uart0_txd", + "uart0_cts", + "uart0_rts", + "uart1_rxd", + "uart1_txd", + "scb0_sdat", + "scb0_sclk", + "scb1_sdat", + "scb1_sclk", + "scb2_sdat", + "scb2_sclk", + "i2s_mclk", + "i2s_bclk_out", + "i2s_lrclk_out", + "i2s_dout0", + "i2s_dout1", + "i2s_dout2", + "i2s_din", + "pdm_a", + "pdm_b", + "pdm_c", +}; + +static const char * const sdh_sdio_groups[] = { + "sdh", + "sdio", + /* sdh pins */ + "sdh_cd", + "sdh_wp", + "sdh_clk_in", + /* sdio pins */ + "sdio_clk", + "sdio_cmd", + "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", +}; + +static const char * const spi1_cs2_groups[] = { + "spi1_cs2", +}; + +static const char * const pdm_dac_groups[] = { + "pdm_d", +}; + +static const char * const usb_vbus_groups[] = { + "spi1_cs2", + "pdm_d", +}; + +static const char * const afe_groups[] = { + "afe", + /* afe pins */ + "tx_on", + "rx_on", + "pll_on", + "pa_on", + "rx_hp", + "ant_sel0", + "ant_sel1", + "gain0", + "gain1", + "gain2", + "gain3", + "gain4", + "gain5", + "gain6", + "gain7", +}; + +static const char * const tft_groups[] = { + "tft", + /* tft pins */ + "tft_red0", + "tft_red1", + "tft_red2", + "tft_red3", + "tft_red4", + "tft_red5", + "tft_red6", + "tft_red7", + "tft_green0", + "tft_green1", + "tft_green2", + "tft_green3", + "tft_green4", + "tft_green5", + "tft_green6", + "tft_green7", + "tft_blue0", + "tft_blue1", + "tft_blue2", + "tft_blue3", + "tft_blue4", + "tft_blue5", + "tft_blue6", + "tft_blue7", + "tft_vdden_gd", + "tft_panelclk", + "tft_blank_ls", + "tft_vsync_ns", + "tft_hsync_nr", + "tft_vd12acb", + "tft_pwrsave", +}; + +/* Mux functions that can be used by a mux */ + +enum tz1090_mux { + /* internal placeholder */ + TZ1090_MUX_NA = -1, + /* magic per-non-muxing-GPIO-pin peripheral mode mux */ + TZ1090_MUX_PERIP, + /* SDH/SDIO mux */ + TZ1090_MUX_SDH, + TZ1090_MUX_SDIO, + /* USB_VBUS muxes */ + TZ1090_MUX_SPI1_CS2, + TZ1090_MUX_PDM_DAC, + TZ1090_MUX_USB_VBUS, + /* AFE mux */ + TZ1090_MUX_AFE, + TZ1090_MUX_TS_OUT_0, + /* EXT_DAC mux */ + TZ1090_MUX_DAC, + TZ1090_MUX_NOT_IQADC_STB, + TZ1090_MUX_IQDAC_STB, + /* TFT mux */ + TZ1090_MUX_TFT, + TZ1090_MUX_EXT_DAC, + TZ1090_MUX_TS_OUT_1, + TZ1090_MUX_LCD_TRACE, + TZ1090_MUX_PHY_RINGOSC, +}; + +#define FUNCTION(mux, fname, group) \ + [(TZ1090_MUX_ ## mux)] = { \ + .name = #fname, \ + .groups = group##_groups, \ + .ngroups = ARRAY_SIZE(group##_groups), \ + } +/* For intermediate functions with submuxes */ +#define NULL_FUNCTION(mux, fname) \ + [(TZ1090_MUX_ ## mux)] = { \ + .name = #fname, \ + } + +/* Must correlate with enum tz1090_mux */ +static const struct tz1090_function tz1090_functions[] = { + /* FUNCTION function name pingroups */ + FUNCTION(PERIP, perip, perip), + FUNCTION(SDH, sdh, sdh_sdio), + FUNCTION(SDIO, sdio, sdh_sdio), + FUNCTION(SPI1_CS2, spi1_cs2, spi1_cs2), + FUNCTION(PDM_DAC, pdm_dac, pdm_dac), + FUNCTION(USB_VBUS, usb_vbus, usb_vbus), + FUNCTION(AFE, afe, afe), + FUNCTION(TS_OUT_0, ts_out_0, afe), + FUNCTION(DAC, ext_dac, tft), + FUNCTION(NOT_IQADC_STB, not_iqadc_stb, tft), + FUNCTION(IQDAC_STB, iqdac_stb, tft), + FUNCTION(TFT, tft, tft), + NULL_FUNCTION(EXT_DAC, _ext_dac), + FUNCTION(TS_OUT_1, ts_out_1, tft), + FUNCTION(LCD_TRACE, lcd_trace, tft), + FUNCTION(PHY_RINGOSC, phy_ringosc, tft), +}; + +/* Sub muxes */ + +/** + * MUX() - Initialise a mux description. + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + */ +#define MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) \ + { \ + .funcs = { \ + TZ1090_MUX_ ## f0, \ + TZ1090_MUX_ ## f1, \ + TZ1090_MUX_ ## f2, \ + TZ1090_MUX_ ## f3, \ + TZ1090_MUX_ ## f4, \ + }, \ + .reg = (REG_PINCTRL_ ## mux_r), \ + .bit = (mux_b), \ + .width = (mux_w), \ + } + +/** + * DEFINE_SUBMUX() - Defines a submux description separate from a pin group. + * @mux: Mux name (_submux is appended) + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + * + * A sub mux is a nested mux that can be bound to a magic function number used + * by another mux description. For example value 4 of the top level mux might + * correspond to a function which has a submux pointed to in tz1090_submux[]. + * The outer mux can then take on any function in the top level mux or the + * submux, and if a submux function is chosen both muxes are updated to route + * the signal from the submux. + * + * The submux can be defined with DEFINE_SUBMUX and pointed to from + * tz1090_submux[] using SUBMUX. + */ +#define DEFINE_SUBMUX(mux, f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) \ + static struct tz1090_muxdesc mux ## _submux = \ + MUX(f0, f1, f2, f3, f4, mux_r, mux_b, mux_w) + +/** + * SUBMUX() - Link a submux to a function number. + * @f: Function name (TZ1090_MUX_ is prepended) + * @submux: Submux name (_submux is appended) + * + * For use in tz1090_submux[] initialisation to link an intermediate function + * number to a particular submux description. It indicates that when the + * function is chosen the signal is connected to the submux. + */ +#define SUBMUX(f, submux) [(TZ1090_MUX_ ## f)] = &(submux ## _submux) + +/** + * MUX_PG() - Initialise a pin group with mux control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * @f0: Function 0 (TZ1090_MUX_ is prepended, NA for none) + * @f1: Function 1 (TZ1090_MUX_ is prepended, NA for none) + * @f2: Function 2 (TZ1090_MUX_ is prepended, NA for none) + * @f3: Function 3 (TZ1090_MUX_ is prepended, NA for none) + * @f4: Function 4 (TZ1090_MUX_ is prepended, NA for none) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register that the mux field begins + * @mux_w: Width of mux field in register + */ +#define MUX_PG(pg_name, f0, f1, f2, f3, f4, \ + mux_r, mux_b, mux_w) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .mux = MUX(f0, f1, f2, f3, f4, \ + mux_r, mux_b, mux_w), \ + } + +/** + * SIMPLE_PG() - Initialise a simple convenience pin group + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * + * A simple pin group is simply used for binding pins together so they can be + * referred to by a single name instead of having to list every pin + * individually. + */ +#define SIMPLE_PG(pg_name) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + } + +/** + * DRV_PG() - Initialise a pin group with drive control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * @slw_b: Slew register bit. + * The same bit is used for Schmitt, and Drive (*2). + */ +#define DRV_PG(pg_name, slw_b) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .drv = true, \ + .slw_bit = (slw_b), \ + } + +/* + * Define main muxing pin groups + */ + +/* submuxes */ + +/* name f0, f1, f2, f3, f4, mux r/b/w */ +DEFINE_SUBMUX(ext_dac, DAC, NOT_IQADC_STB, IQDAC_STB, NA, NA, IF_CTL, 6, 2); + +/* bind submuxes to internal functions */ +static struct tz1090_muxdesc *tz1090_submux[] = { + SUBMUX(EXT_DAC, ext_dac), +}; + +/* + * These are the pin mux groups. Pin muxing can be enabled and disabled for each + * pin individually so these groups are internal. The mapping of pins to pin mux + * group is below (tz1090_mux_pins). + */ +static struct tz1090_pingroup tz1090_mux_groups[] = { + /* Muxing pin groups */ + /* pg_name, f0, f1, f2, f3, f4, mux r/b/w */ + MUX_PG(sdh, SDH, SDIO, NA, NA, NA, IF_CTL, 20, 2), + MUX_PG(sdio, SDIO, SDH, NA, NA, NA, IF_CTL, 16, 2), + MUX_PG(spi1_cs2, SPI1_CS2, USB_VBUS, NA, NA, NA, IF_CTL, 10, 2), + MUX_PG(pdm_d, PDM_DAC, USB_VBUS, NA, NA, NA, IF_CTL, 8, 2), + MUX_PG(afe, AFE, TS_OUT_0, NA, NA, NA, IF_CTL, 4, 2), + MUX_PG(tft, TFT, EXT_DAC, TS_OUT_1, LCD_TRACE, PHY_RINGOSC, IF_CTL, 0, 3), +}; + +/* + * This is the mapping from GPIO pins to pin mux groups in tz1090_mux_groups[]. + * Pins which aren't muxable to multiple peripherals are set to + * TZ1090_MUX_GROUP_MAX to enable the "perip" function to enable/disable + * peripheral control of the pin. + * + * This array is initialised in tz1090_init_mux_pins(). + */ +static u8 tz1090_mux_pins[NUM_GPIOS]; + +/* TZ1090_MUX_GROUP_MAX is used in tz1090_mux_pins[] for non-muxing pins */ +#define TZ1090_MUX_GROUP_MAX ARRAY_SIZE(tz1090_mux_groups) + +/** + * tz1090_init_mux_pins() - Initialise GPIO pin to mux group mapping. + * + * Initialises the tz1090_mux_pins[] array to be the inverse of the pin lists in + * each pin mux group in tz1090_mux_groups[]. + * + * It is assumed that no pin mux groups overlap (share pins). + */ +static void __init tz1090_init_mux_pins(void) +{ + unsigned int g, p; + const struct tz1090_pingroup *grp; + const unsigned int *pin; + + for (p = 0; p < NUM_GPIOS; ++p) + tz1090_mux_pins[p] = TZ1090_MUX_GROUP_MAX; + + grp = tz1090_mux_groups; + for (g = 0, grp = tz1090_mux_groups; + g < ARRAY_SIZE(tz1090_mux_groups); ++g, ++grp) + for (pin = grp->pins, p = 0; p < grp->npins; ++p, ++pin) + tz1090_mux_pins[*pin] = g; +} + +/* + * These are the externally visible pin groups. Some of them allow group control + * of drive configuration. Some are just simple convenience pingroups. All the + * internal pin mux groups in tz1090_mux_groups[] are mirrored here with the + * same pins. + * Pseudo pin groups follow in the group numbers after this array for each GPIO + * pin. Any group used for muxing must have all pins belonging to the same pin + * mux group. + */ +static struct tz1090_pingroup tz1090_groups[] = { + /* Pin groups with drive control (with no out of place pins) */ + /* pg_name, slw/schmitt/drv b */ + DRV_PG(jtag, 11 /* 11, 22 */), + DRV_PG(tft, 10 /* 10, 20 */), + DRV_PG(scb2, 9 /* 9, 18 */), + DRV_PG(spi0, 7 /* 7, 14 */), + DRV_PG(uart, 5 /* 5, 10 */), + DRV_PG(scb1, 4 /* 4, 8 */), + DRV_PG(spi1, 3 /* 3, 6 */), + DRV_PG(afe, 0 /* 0, 0 */), + + /* + * Drive specific pin groups (with odd combinations of pins which makes + * the pin group naming somewhat arbitrary) + */ + /* pg_name, slw/schmitt/drv b */ + DRV_PG(drive_sdio, 8 /* 8, 16 */), /* sdio_* + sdh_* */ + DRV_PG(drive_i2s, 6 /* 6, 12 */), /* i2s_* + clk_out1 */ + DRV_PG(drive_scb0, 2 /* 2, 4 */), /* scb0_* + pdm_{c,d} */ + DRV_PG(drive_pdm, 1 /* 1, 2 */), /* pdm_{a,b} + clk_out0 */ + + /* Convenience pin groups */ + /* pg_name */ + SIMPLE_PG(uart0), + SIMPLE_PG(uart1), + SIMPLE_PG(scb0), + SIMPLE_PG(i2s), + SIMPLE_PG(sdh), + SIMPLE_PG(sdio), + + /* pseudo-pingroups for each GPIO pin follow */ +}; + +/** + * struct tz1090_pmx - Private pinctrl data + * @dev: Platform device + * @pctl: Pin control device + * @regs: Register region + * @lock: Lock protecting coherency of pin_en, gpio_en, and SELECT regs + * @pin_en: Pins that have been enabled (32 pins packed into each element) + * @gpio_en: GPIOs that have been enabled (32 pins packed into each element) + */ +struct tz1090_pmx { + struct device *dev; + struct pinctrl_dev *pctl; + void __iomem *regs; + spinlock_t lock; + u32 pin_en[3]; + u32 gpio_en[3]; +}; + +static inline u32 pmx_read(struct tz1090_pmx *pmx, u32 reg) +{ + return ioread32(pmx->regs + reg); +} + +static inline void pmx_write(struct tz1090_pmx *pmx, u32 val, u32 reg) +{ + iowrite32(val, pmx->regs + reg); +} + +/* + * Pin control operations + */ + +/* each GPIO pin has it's own pseudo pingroup containing only itself */ + +static int tz1090_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_groups) + NUM_GPIOS; +} + +static const char *tz1090_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int group) +{ + if (group < ARRAY_SIZE(tz1090_groups)) { + /* normal pingroup */ + return tz1090_groups[group].name; + } else { + /* individual gpio pin pseudo-pingroup */ + unsigned int pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pins[pin].name; + } +} + +static int tz1090_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group, + const unsigned int **pins, + unsigned int *num_pins) +{ + if (group < ARRAY_SIZE(tz1090_groups)) { + /* normal pingroup */ + *pins = tz1090_groups[group].pins; + *num_pins = tz1090_groups[group].npins; + } else { + /* individual gpio pin pseudo-pingroup */ + unsigned int pin = group - ARRAY_SIZE(tz1090_groups); + *pins = &tz1090_pins[pin].number; + *num_pins = 1; + } + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static void tz1090_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned int offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} +#endif + +static int reserve_map(struct device *dev, struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + unsigned int reserve) +{ + unsigned int old_num = *reserved_maps; + unsigned int new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) { + dev_err(dev, "krealloc(map) failed\n"); + return -ENOMEM; + } + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int add_map_mux(struct pinctrl_map **map, unsigned int *reserved_maps, + unsigned int *num_maps, const char *group, + const char *function) +{ + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int add_map_configs(struct device *dev, + struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + const char *group, unsigned long *configs, + unsigned int num_configs) +{ + unsigned long *dup_configs; + + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) { + dev_err(dev, "kmemdup(configs) failed\n"); + return -ENOMEM; + } + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static void tz1090_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned int num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + + kfree(map); +} + +static int tz1090_pinctrl_dt_subnode_to_map(struct device *dev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *reserved_maps, + unsigned int *num_maps) +{ + int ret; + const char *function; + unsigned long *configs = NULL; + unsigned int num_configs = 0; + unsigned int reserve; + struct property *prop; + const char *group; + + ret = of_property_read_string(np, "tz1090,function", &function); + if (ret < 0) { + /* EINVAL=missing, which is fine since it's optional */ + if (ret != -EINVAL) + dev_err(dev, "could not parse property function\n"); + function = NULL; + } + + ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs); + if (ret) + return ret; + + reserve = 0; + if (function != NULL) + reserve++; + if (num_configs) + reserve++; + ret = of_property_count_strings(np, "tz1090,pins"); + if (ret < 0) { + dev_err(dev, "could not parse property pins\n"); + goto exit; + } + reserve *= ret; + + ret = reserve_map(dev, map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "tz1090,pins", prop, group) { + if (function) { + ret = add_map_mux(map, reserved_maps, num_maps, + group, function); + if (ret < 0) + goto exit; + } + + if (num_configs) { + ret = add_map_configs(dev, map, reserved_maps, + num_maps, group, configs, + num_configs); + if (ret < 0) + goto exit; + } + } + + ret = 0; + +exit: + kfree(configs); + return ret; +} + +static int tz1090_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + unsigned int reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = tz1090_pinctrl_dt_subnode_to_map(pctldev->dev, np, map, + &reserved_maps, + num_maps); + if (ret < 0) { + tz1090_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + +static struct pinctrl_ops tz1090_pinctrl_ops = { + .get_groups_count = tz1090_pinctrl_get_groups_count, + .get_group_name = tz1090_pinctrl_get_group_name, + .get_group_pins = tz1090_pinctrl_get_group_pins, +#ifdef CONFIG_DEBUG_FS + .pin_dbg_show = tz1090_pinctrl_pin_dbg_show, +#endif + .dt_node_to_map = tz1090_pinctrl_dt_node_to_map, + .dt_free_map = tz1090_pinctrl_dt_free_map, +}; + +/* + * Pin mux operations + */ + +static int tz1090_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_functions); +} + +static const char *tz1090_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned int function) +{ + return tz1090_functions[function].name; +} + +static int tz1090_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, + unsigned int function, + const char * const **groups, + unsigned int * const num_groups) +{ + /* pingroup functions */ + *groups = tz1090_functions[function].groups; + *num_groups = tz1090_functions[function].ngroups; + return 0; +} + +/** + * tz1090_pinctrl_select() - update bit in SELECT register + * @pmx: Pinmux data + * @pin: Pin number (must be within GPIO range) + */ +static void tz1090_pinctrl_select(struct tz1090_pmx *pmx, + unsigned int pin) +{ + u32 reg, reg_shift, select, val; + unsigned int pmx_index, pmx_shift; + unsigned long flags; + + /* uses base 32 instead of base 30 */ + pmx_index = pin >> 5; + pmx_shift = pin & 0x1f; + + /* select = !perip || gpio */ + select = ((~pmx->pin_en[pmx_index] | + pmx->gpio_en[pmx_index]) >> pmx_shift) & 1; + + /* find register and bit offset (base 30) */ + reg = REG_PINCTRL_SELECT + 4*(pin / 30); + reg_shift = pin % 30; + + /* modify gpio select bit */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~BIT(reg_shift); + val |= select << reg_shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); +} + +/** + * tz1090_pinctrl_gpio_select() - enable/disable GPIO usage for a pin + * @pmx: Pinmux data + * @pin: Pin number + * @gpio_select: true to enable pin as GPIO, + * false to leave control to whatever function is enabled + * + * Records that GPIO usage is enabled/disabled so that enabling a function + * doesn't override the SELECT register bit. + */ +static void tz1090_pinctrl_gpio_select(struct tz1090_pmx *pmx, + unsigned int pin, + bool gpio_select) +{ + unsigned int index, shift; + u32 gpio_en; + + if (pin >= NUM_GPIOS) + return; + + /* uses base 32 instead of base 30 */ + index = pin >> 5; + shift = pin & 0x1f; + + spin_lock(&pmx->lock); + + /* keep a record whether gpio is selected */ + gpio_en = pmx->gpio_en[index]; + gpio_en &= ~BIT(shift); + if (gpio_select) + gpio_en |= BIT(shift); + pmx->gpio_en[index] = gpio_en; + + /* update the select bit */ + tz1090_pinctrl_select(pmx, pin); + + spin_unlock(&pmx->lock); +} + +/** + * tz1090_pinctrl_perip_select() - enable/disable peripheral interface for a pin + * @pmx: Pinmux data + * @pin: Pin number + * @perip_select: true to enable peripheral interface when not GPIO, + * false to leave pin in GPIO mode + * + * Records that peripheral usage is enabled/disabled so that SELECT register can + * be set appropriately when GPIO is disabled. + */ +static void tz1090_pinctrl_perip_select(struct tz1090_pmx *pmx, + unsigned int pin, + bool perip_select) +{ + unsigned int index, shift; + u32 pin_en; + + if (pin >= NUM_GPIOS) + return; + + /* uses base 32 instead of base 30 */ + index = pin >> 5; + shift = pin & 0x1f; + + spin_lock(&pmx->lock); + + /* keep a record whether peripheral is selected */ + pin_en = pmx->pin_en[index]; + pin_en &= ~BIT(shift); + if (perip_select) + pin_en |= BIT(shift); + pmx->pin_en[index] = pin_en; + + /* update the select bit */ + tz1090_pinctrl_select(pmx, pin); + + spin_unlock(&pmx->lock); +} + +/** + * tz1090_pinctrl_enable_mux() - Switch a pin mux group to a function. + * @pmx: Pinmux data + * @desc: Pinmux description + * @function: Function to switch to + * + * Enable a particular function on a pin mux group. Since pin mux descriptions + * are nested this function is recursive. + */ +static int tz1090_pinctrl_enable_mux(struct tz1090_pmx *pmx, + const struct tz1090_muxdesc *desc, + unsigned int function) +{ + const int *fit; + unsigned long flags; + int mux; + unsigned int func, ret; + u32 reg, mask; + + /* find the mux value for this function, searching recursively */ + for (mux = 0, fit = desc->funcs; + mux < ARRAY_SIZE(desc->funcs); ++mux, ++fit) { + func = *fit; + if (func == function) + goto found_mux; + + /* maybe it's a sub-mux */ + if (func < ARRAY_SIZE(tz1090_submux) && tz1090_submux[func]) { + ret = tz1090_pinctrl_enable_mux(pmx, + tz1090_submux[func], + function); + if (!ret) + goto found_mux; + } + } + + return -EINVAL; +found_mux: + + /* Set up the mux */ + if (desc->width) { + mask = (BIT(desc->width) - 1) << desc->bit; + __global_lock2(flags); + reg = pmx_read(pmx, desc->reg); + reg &= ~mask; + reg |= (mux << desc->bit) & mask; + pmx_write(pmx, reg, desc->reg); + __global_unlock2(flags); + } + + return 0; +} + +/** + * tz1090_pinctrl_enable() - Enable a function on a pin group. + * @pctldev: Pin control data + * @function: Function index to enable + * @group: Group index to enable + * + * Enable a particular function on a group of pins. The per GPIO pin pseudo pin + * groups can be used (in which case the pin will be enabled in peripheral mode + * and if it belongs to a pin mux group the mux will be switched if it isn't + * already in use. Some convenience pin groups can also be used in which case + * the effect is the same as enabling the function on each individual pin in the + * group. + */ +static int tz1090_pinctrl_enable(struct pinctrl_dev *pctldev, + unsigned int function, unsigned int group) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + struct tz1090_pingroup *grp; + int ret; + unsigned int pin_num, mux_group, i, npins; + const unsigned int *pins; + + /* group of pins? */ + if (group < ARRAY_SIZE(tz1090_groups)) { + grp = &tz1090_groups[group]; + npins = grp->npins; + pins = grp->pins; + /* + * All pins in the group must belong to the same mux group, + * which allows us to just use the mux group of the first pin. + * By explicitly listing permitted pingroups for each function + * the pinmux core should ensure this is always the case. + */ + } else { + pin_num = group - ARRAY_SIZE(tz1090_groups); + npins = 1; + pins = &pin_num; + } + mux_group = tz1090_mux_pins[*pins]; + + /* no mux group, but can still be individually muxed to peripheral */ + if (mux_group >= TZ1090_MUX_GROUP_MAX) { + if (function == TZ1090_MUX_PERIP) + goto mux_pins; + return -EINVAL; + } + + /* mux group already set to a different function? */ + grp = &tz1090_mux_groups[mux_group]; + if (grp->func_count && grp->func != function) { + dev_err(pctldev->dev, + "%s: can't mux pin(s) to '%s', group already muxed to '%s'\n", + __func__, tz1090_functions[function].name, + tz1090_functions[grp->func].name); + return -EBUSY; + } + + dev_dbg(pctldev->dev, "%s: muxing %u pin(s) in '%s' to '%s'\n", + __func__, npins, grp->name, tz1090_functions[function].name); + + /* if first pin in mux group to be enabled, enable the group mux */ + if (!grp->func_count) { + grp->func = function; + ret = tz1090_pinctrl_enable_mux(pmx, &grp->mux, function); + if (ret) + return ret; + } + /* add pins to ref count and mux individually to peripheral */ + grp->func_count += npins; +mux_pins: + for (i = 0; i < npins; ++i) + tz1090_pinctrl_perip_select(pmx, pins[i], true); + + return 0; +} + +/** + * tz1090_pinctrl_disable() - Disable a function on a pin group. + * @pctldev: Pin control data + * @function: Function index to disable + * @group: Group index to disable + * + * Disable a particular function on a group of pins. The per GPIO pin pseudo pin + * groups can be used (in which case the pin will be taken out of peripheral + * mode. Some convenience pin groups can also be used in which case the effect + * is the same as enabling the function on each individual pin in the group. + */ +static void tz1090_pinctrl_disable(struct pinctrl_dev *pctldev, + unsigned int function, unsigned int group) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + struct tz1090_pingroup *grp; + unsigned int pin_num, mux_group, i, npins; + const unsigned int *pins; + + /* group of pins? */ + if (group < ARRAY_SIZE(tz1090_groups)) { + grp = &tz1090_groups[group]; + npins = grp->npins; + pins = grp->pins; + /* + * All pins in the group must belong to the same mux group, + * which allows us to just use the mux group of the first pin. + * By explicitly listing permitted pingroups for each function + * the pinmux core should ensure this is always the case. + */ + } else { + pin_num = group - ARRAY_SIZE(tz1090_groups); + npins = 1; + pins = &pin_num; + } + mux_group = tz1090_mux_pins[*pins]; + + /* no mux group, but can still be individually muxed to peripheral */ + if (mux_group >= TZ1090_MUX_GROUP_MAX) { + if (function == TZ1090_MUX_PERIP) + goto unmux_pins; + return; + } + + /* mux group already set to a different function? */ + grp = &tz1090_mux_groups[mux_group]; + dev_dbg(pctldev->dev, "%s: unmuxing %u pin(s) in '%s' from '%s'\n", + __func__, npins, grp->name, tz1090_functions[function].name); + + /* subtract pins from ref count and unmux individually */ + WARN_ON(grp->func_count < npins); + grp->func_count -= npins; +unmux_pins: + for (i = 0; i < npins; ++i) + tz1090_pinctrl_perip_select(pmx, pins[i], false); +} + +/** + * tz1090_pinctrl_gpio_request_enable() - Put pin in GPIO mode. + * @pctldev: Pin control data + * @range: GPIO range + * @pin: Pin number + * + * Puts a particular pin into GPIO mode, disabling peripheral control until it's + * disabled again. + */ +static int tz1090_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + tz1090_pinctrl_gpio_select(pmx, pin, true); + return 0; +} + +/** + * tz1090_pinctrl_gpio_disable_free() - Take pin out of GPIO mode. + * @pctldev: Pin control data + * @range: GPIO range + * @pin: Pin number + * + * Take a particular pin out of GPIO mode. If the pin is enabled for a + * peripheral it will return to peripheral mode. + */ +static void tz1090_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + tz1090_pinctrl_gpio_select(pmx, pin, false); +} + +static struct pinmux_ops tz1090_pinmux_ops = { + .get_functions_count = tz1090_pinctrl_get_funcs_count, + .get_function_name = tz1090_pinctrl_get_func_name, + .get_function_groups = tz1090_pinctrl_get_func_groups, + .enable = tz1090_pinctrl_enable, + .disable = tz1090_pinctrl_disable, + .gpio_request_enable = tz1090_pinctrl_gpio_request_enable, + .gpio_disable_free = tz1090_pinctrl_gpio_disable_free, +}; + +/* + * Pin config operations + */ + +struct tz1090_pinconf_pullup { + unsigned char index; + unsigned char shift; +}; + +/* The mapping of pin to pull up/down register index and shift */ +static struct tz1090_pinconf_pullup tz1090_pinconf_pullup[] = { + {5, 22}, /* 0 - TZ1090_PIN_SDIO_CLK */ + {0, 14}, /* 1 - TZ1090_PIN_SDIO_CMD */ + {0, 6}, /* 2 - TZ1090_PIN_SDIO_D0 */ + {0, 8}, /* 3 - TZ1090_PIN_SDIO_D1 */ + {0, 10}, /* 4 - TZ1090_PIN_SDIO_D2 */ + {0, 12}, /* 5 - TZ1090_PIN_SDIO_D3 */ + {0, 2}, /* 6 - TZ1090_PIN_SDH_CD */ + {0, 4}, /* 7 - TZ1090_PIN_SDH_WP */ + {0, 16}, /* 8 - TZ1090_PIN_SPI0_MCLK */ + {0, 18}, /* 9 - TZ1090_PIN_SPI0_CS0 */ + {0, 20}, /* 10 - TZ1090_PIN_SPI0_CS1 */ + {0, 22}, /* 11 - TZ1090_PIN_SPI0_CS2 */ + {0, 24}, /* 12 - TZ1090_PIN_SPI0_DOUT */ + {0, 26}, /* 13 - TZ1090_PIN_SPI0_DIN */ + {0, 28}, /* 14 - TZ1090_PIN_SPI1_MCLK */ + {0, 30}, /* 15 - TZ1090_PIN_SPI1_CS0 */ + {1, 0}, /* 16 - TZ1090_PIN_SPI1_CS1 */ + {1, 2}, /* 17 - TZ1090_PIN_SPI1_CS2 */ + {1, 4}, /* 18 - TZ1090_PIN_SPI1_DOUT */ + {1, 6}, /* 19 - TZ1090_PIN_SPI1_DIN */ + {1, 8}, /* 20 - TZ1090_PIN_UART0_RXD */ + {1, 10}, /* 21 - TZ1090_PIN_UART0_TXD */ + {1, 12}, /* 22 - TZ1090_PIN_UART0_CTS */ + {1, 14}, /* 23 - TZ1090_PIN_UART0_RTS */ + {1, 16}, /* 24 - TZ1090_PIN_UART1_RXD */ + {1, 18}, /* 25 - TZ1090_PIN_UART1_TXD */ + {1, 20}, /* 26 - TZ1090_PIN_SCB0_SDAT */ + {1, 22}, /* 27 - TZ1090_PIN_SCB0_SCLK */ + {1, 24}, /* 28 - TZ1090_PIN_SCB1_SDAT */ + {1, 26}, /* 29 - TZ1090_PIN_SCB1_SCLK */ + + {1, 28}, /* 30 - TZ1090_PIN_SCB2_SDAT */ + {1, 30}, /* 31 - TZ1090_PIN_SCB2_SCLK */ + {2, 0}, /* 32 - TZ1090_PIN_I2S_MCLK */ + {2, 2}, /* 33 - TZ1090_PIN_I2S_BCLK_OUT */ + {2, 4}, /* 34 - TZ1090_PIN_I2S_LRCLK_OUT */ + {2, 6}, /* 35 - TZ1090_PIN_I2S_DOUT0 */ + {2, 8}, /* 36 - TZ1090_PIN_I2S_DOUT1 */ + {2, 10}, /* 37 - TZ1090_PIN_I2S_DOUT2 */ + {2, 12}, /* 38 - TZ1090_PIN_I2S_DIN */ + {4, 12}, /* 39 - TZ1090_PIN_PDM_A */ + {4, 14}, /* 40 - TZ1090_PIN_PDM_B */ + {4, 18}, /* 41 - TZ1090_PIN_PDM_C */ + {4, 20}, /* 42 - TZ1090_PIN_PDM_D */ + {2, 14}, /* 43 - TZ1090_PIN_TFT_RED0 */ + {2, 16}, /* 44 - TZ1090_PIN_TFT_RED1 */ + {2, 18}, /* 45 - TZ1090_PIN_TFT_RED2 */ + {2, 20}, /* 46 - TZ1090_PIN_TFT_RED3 */ + {2, 22}, /* 47 - TZ1090_PIN_TFT_RED4 */ + {2, 24}, /* 48 - TZ1090_PIN_TFT_RED5 */ + {2, 26}, /* 49 - TZ1090_PIN_TFT_RED6 */ + {2, 28}, /* 50 - TZ1090_PIN_TFT_RED7 */ + {2, 30}, /* 51 - TZ1090_PIN_TFT_GREEN0 */ + {3, 0}, /* 52 - TZ1090_PIN_TFT_GREEN1 */ + {3, 2}, /* 53 - TZ1090_PIN_TFT_GREEN2 */ + {3, 4}, /* 54 - TZ1090_PIN_TFT_GREEN3 */ + {3, 6}, /* 55 - TZ1090_PIN_TFT_GREEN4 */ + {3, 8}, /* 56 - TZ1090_PIN_TFT_GREEN5 */ + {3, 10}, /* 57 - TZ1090_PIN_TFT_GREEN6 */ + {3, 12}, /* 58 - TZ1090_PIN_TFT_GREEN7 */ + {3, 14}, /* 59 - TZ1090_PIN_TFT_BLUE0 */ + + {3, 16}, /* 60 - TZ1090_PIN_TFT_BLUE1 */ + {3, 18}, /* 61 - TZ1090_PIN_TFT_BLUE2 */ + {3, 20}, /* 62 - TZ1090_PIN_TFT_BLUE3 */ + {3, 22}, /* 63 - TZ1090_PIN_TFT_BLUE4 */ + {3, 24}, /* 64 - TZ1090_PIN_TFT_BLUE5 */ + {3, 26}, /* 65 - TZ1090_PIN_TFT_BLUE6 */ + {3, 28}, /* 66 - TZ1090_PIN_TFT_BLUE7 */ + {3, 30}, /* 67 - TZ1090_PIN_TFT_VDDEN_GD */ + {4, 0}, /* 68 - TZ1090_PIN_TFT_PANELCLK */ + {4, 2}, /* 69 - TZ1090_PIN_TFT_BLANK_LS */ + {4, 4}, /* 70 - TZ1090_PIN_TFT_VSYNC_NS */ + {4, 6}, /* 71 - TZ1090_PIN_TFT_HSYNC_NR */ + {4, 8}, /* 72 - TZ1090_PIN_TFT_VD12ACB */ + {4, 10}, /* 73 - TZ1090_PIN_TFT_PWRSAVE */ + {4, 24}, /* 74 - TZ1090_PIN_TX_ON */ + {4, 26}, /* 75 - TZ1090_PIN_RX_ON */ + {4, 28}, /* 76 - TZ1090_PIN_PLL_ON */ + {4, 30}, /* 77 - TZ1090_PIN_PA_ON */ + {5, 0}, /* 78 - TZ1090_PIN_RX_HP */ + {5, 6}, /* 79 - TZ1090_PIN_GAIN0 */ + {5, 8}, /* 80 - TZ1090_PIN_GAIN1 */ + {5, 10}, /* 81 - TZ1090_PIN_GAIN2 */ + {5, 12}, /* 82 - TZ1090_PIN_GAIN3 */ + {5, 14}, /* 83 - TZ1090_PIN_GAIN4 */ + {5, 16}, /* 84 - TZ1090_PIN_GAIN5 */ + {5, 18}, /* 85 - TZ1090_PIN_GAIN6 */ + {5, 20}, /* 86 - TZ1090_PIN_GAIN7 */ + {5, 2}, /* 87 - TZ1090_PIN_ANT_SEL0 */ + {5, 4}, /* 88 - TZ1090_PIN_ANT_SEL1 */ + {0, 0}, /* 89 - TZ1090_PIN_SDH_CLK_IN */ + + {5, 24}, /* 90 - TZ1090_PIN_TCK */ + {5, 26}, /* 91 - TZ1090_PIN_TRST */ + {5, 28}, /* 92 - TZ1090_PIN_TDI */ + {5, 30}, /* 93 - TZ1090_PIN_TDO */ + {6, 0}, /* 94 - TZ1090_PIN_TMS */ + {4, 16}, /* 95 - TZ1090_PIN_CLK_OUT0 */ + {4, 22}, /* 96 - TZ1090_PIN_CLK_OUT1 */ +}; + +static int tz1090_pinconf_reg(struct pinctrl_dev *pctldev, + unsigned int pin, + enum pin_config_param param, + bool report_err, + u32 *reg, u32 *width, u32 *mask, u32 *shift, + u32 *val) +{ + struct tz1090_pinconf_pullup *pu; + + /* All supported pins have controllable input bias */ + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + *val = REG_PU_PD_TRISTATE; + break; + case PIN_CONFIG_BIAS_PULL_UP: + *val = REG_PU_PD_UP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + *val = REG_PU_PD_DOWN; + break; + case PIN_CONFIG_BIAS_BUS_HOLD: + *val = REG_PU_PD_REPEATER; + break; + default: + return -ENOTSUPP; + }; + + /* Only input bias parameters supported */ + pu = &tz1090_pinconf_pullup[pin]; + *reg = REG_PINCTRL_PU_PD + 4*pu->index; + *shift = pu->shift; + *width = 2; + + /* Calculate field information */ + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + int ret; + u32 reg, width, mask, shift, val, tmp, arg; + + /* Get register information */ + ret = tz1090_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Extract field from register */ + tmp = pmx_read(pmx, reg); + arg = ((tmp & mask) >> shift) == val; + + /* Config not active */ + if (!arg) + return -EINVAL; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pinconf_set(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(config); + unsigned int arg = pinconf_to_config_argument(config); + int ret; + u32 reg, width, mask, shift, val, tmp; + unsigned long flags; + + dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", + __func__, tz1090_pins[pin].name, config); + + /* Get register information */ + ret = tz1090_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Unpack argument and range check it */ + if (arg > 1) { + dev_dbg(pctldev->dev, "%s: arg %u out of range\n", + __func__, arg); + return -EINVAL; + } + + /* Write register field */ + __global_lock2(flags); + tmp = pmx_read(pmx, reg); + tmp &= ~mask; + if (arg) + tmp |= val << shift; + pmx_write(pmx, tmp, reg); + __global_unlock2(flags); + + return 0; +} + +static const int tz1090_boolean_map[] = { + [0] = -EINVAL, + [1] = 1, +}; + +static const int tz1090_dr_map[] = { + [REG_DR_2mA] = 2, + [REG_DR_4mA] = 4, + [REG_DR_8mA] = 8, + [REG_DR_12mA] = 12, +}; + +static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev, + const struct tz1090_pingroup *g, + enum pin_config_param param, + bool report_err, + u32 *reg, u32 *width, u32 *mask, u32 *shift, + const int **map) +{ + /* Drive configuration applies in groups, but not to all groups. */ + if (!g->drv) { + if (report_err) + dev_dbg(pctldev->dev, + "%s: group %s has no drive control\n", + __func__, g->name); + return -ENOTSUPP; + } + + /* Find information about drive parameter's register */ + switch (param) { + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + *reg = REG_PINCTRL_SCHMITT; + *width = 1; + *map = tz1090_boolean_map; + break; + case PIN_CONFIG_SLEW_RATE: + *reg = REG_PINCTRL_SR; + *width = 1; + *map = tz1090_boolean_map; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + *reg = REG_PINCTRL_DR; + *width = 2; + *map = tz1090_dr_map; + break; + default: + return -ENOTSUPP; + }; + + /* Calculate field information */ + *shift = g->slw_bit * *width; + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long *config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pingroup *g; + enum pin_config_param param = pinconf_to_config_param(*config); + int ret, arg; + unsigned int pin; + u32 reg, width, mask, shift, val; + const int *map; + + if (group >= ARRAY_SIZE(tz1090_groups)) { + pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pinconf_get(pctldev, pin, config); + } + + g = &tz1090_groups[group]; + if (g->npins == 1) { + pin = g->pins[0]; + ret = tz1090_pinconf_get(pctldev, pin, config); + if (ret != -ENOTSUPP) + return ret; + } + + /* Get register information */ + ret = tz1090_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) + return ret; + + /* Extract field from register */ + val = pmx_read(pmx, reg); + arg = map[(val & mask) >> shift]; + if (arg < 0) + return arg; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int group, unsigned long config) +{ + struct tz1090_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pingroup *g; + enum pin_config_param param = pinconf_to_config_param(config); + unsigned int arg, pin, i; + const unsigned int *pit; + int ret; + u32 reg, width, mask, shift, val; + unsigned long flags; + const int *map; + + if (group >= ARRAY_SIZE(tz1090_groups)) { + pin = group - ARRAY_SIZE(tz1090_groups); + return tz1090_pinconf_set(pctldev, pin, config); + } + + g = &tz1090_groups[group]; + if (g->npins == 1) { + pin = g->pins[0]; + ret = tz1090_pinconf_set(pctldev, pin, config); + if (ret != -ENOTSUPP) + return ret; + } + + dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", + __func__, g->name, config); + + /* Get register information */ + ret = tz1090_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) { + /* + * Maybe we're trying to set a per-pin configuration of a group, + * so do the pins one by one. This is mainly as a convenience. + */ + for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { + ret = tz1090_pinconf_set(pctldev, *pit, config); + if (ret) + return ret; + } + return 0; + } + + /* Unpack argument and map it to register value */ + arg = pinconf_to_config_argument(config); + for (i = 0; i < BIT(width); ++i) { + if (map[i] == arg || (map[i] == -EINVAL && !arg)) { + /* Write register field */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~mask; + val |= i << shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); + return 0; + } + } + + dev_dbg(pctldev->dev, "%s: arg %u not supported\n", + __func__, arg); + return -EINVAL; +} + +static struct pinconf_ops tz1090_pinconf_ops = { + .is_generic = true, + .pin_config_get = tz1090_pinconf_get, + .pin_config_set = tz1090_pinconf_set, + .pin_config_group_get = tz1090_pinconf_group_get, + .pin_config_group_set = tz1090_pinconf_group_set, + .pin_config_config_dbg_show = pinconf_generic_dump_config, +}; + +/* + * Pin control driver setup + */ + +static struct pinctrl_desc tz1090_pinctrl_desc = { + .pctlops = &tz1090_pinctrl_ops, + .pmxops = &tz1090_pinmux_ops, + .confops = &tz1090_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int tz1090_pinctrl_probe(struct platform_device *pdev) +{ + struct tz1090_pmx *pmx; + struct resource *res; + + pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL); + if (!pmx) { + dev_err(&pdev->dev, "Can't alloc tz1090_pmx\n"); + return -ENOMEM; + } + pmx->dev = &pdev->dev; + spin_lock_init(&pmx->lock); + + tz1090_pinctrl_desc.name = dev_name(&pdev->dev); + tz1090_pinctrl_desc.pins = tz1090_pins; + tz1090_pinctrl_desc.npins = ARRAY_SIZE(tz1090_pins); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing MEM resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, + "Couldn't request MEM resource\n"); + return -ENODEV; + } + + pmx->regs = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!pmx->regs) { + dev_err(&pdev->dev, "Couldn't ioremap regs\n"); + return -ENODEV; + } + + pmx->pctl = pinctrl_register(&tz1090_pinctrl_desc, &pdev->dev, pmx); + if (!pmx->pctl) { + dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, pmx); + + dev_info(&pdev->dev, "TZ1090 pinctrl driver initialised\n"); + + return 0; +} + +static int tz1090_pinctrl_remove(struct platform_device *pdev) +{ + struct tz1090_pmx *pmx = platform_get_drvdata(pdev); + + pinctrl_unregister(pmx->pctl); + + return 0; +} + +static struct of_device_id tz1090_pinctrl_of_match[] = { + { .compatible = "img,tz1090-pinctrl", }, + { }, +}; + +static struct platform_driver tz1090_pinctrl_driver = { + .driver = { + .name = "tz1090-pinctrl", + .owner = THIS_MODULE, + .of_match_table = tz1090_pinctrl_of_match, + }, + .probe = tz1090_pinctrl_probe, + .remove = tz1090_pinctrl_remove, +}; + +static int __init tz1090_pinctrl_init(void) +{ + tz1090_init_mux_pins(); + return platform_driver_register(&tz1090_pinctrl_driver); +} +arch_initcall(tz1090_pinctrl_init); + +static void __exit tz1090_pinctrl_exit(void) +{ + platform_driver_unregister(&tz1090_pinctrl_driver); +} +module_exit(tz1090_pinctrl_exit); + +MODULE_AUTHOR("Imagination Technologies Ltd."); +MODULE_DESCRIPTION("Toumaz Xenif TZ1090 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, tz1090_pinctrl_of_match); -- cgit v1.2.3 From b58f0273f0858214da2ee4e1675221e56f7712ec Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 20 Jun 2013 10:26:29 +0100 Subject: pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver Add a pin control driver for the TZ1090's low power pins via the powerdown controller SOC_GPIO_CONTROL registers. These pins have individually controlled pull-up, and group controlled schmitt, slew-rate, drive-strength, and power-on-start (pos). The pdc_gpio0 and pdc_gpio1 pins can also be muxed onto the ir_mod_stable_out and ir_mod_power_out functions respectively. If no function is set they remain in GPIO mode. These muxes can be overridden by requesting them as GPIOs. Signed-off-by: James Hogan Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Linus Walleij Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij --- .../bindings/pinctrl/img,tz1090-pdc-pinctrl.txt | 130 +++ drivers/pinctrl/Kconfig | 6 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-tz1090-pdc.c | 1029 ++++++++++++++++++++ 4 files changed, 1166 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-tz1090-pdc.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt new file mode 100644 index 000000000000..9f7a85bb8fca --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -0,0 +1,130 @@ +ImgTec TZ1090 PDC pin controller + +Required properties: +- compatible: "img,tz1090-pdc-pinctrl" +- reg: Should contain the register physical address and length of the + SOC_GPIO_CONTROL registers in the PDC register region. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +TZ1090-PDC's pin configuration nodes act as a container for an abitrary number +of subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. For this reason, even seemingly boolean +values are actually tristates in this binding: unspecified, off, or on. +Unspecified is represented as an absent property, and off/on are represented as +integer values 0 and 1. + +Required subnode-properties: +- tz1090,pins : An array of strings. Each string contains the name of a pin or + group. Valid values for these names are listed below. + +Optional subnode-properties: +- tz1090,function: A string containing the name of the function to mux to the + pin or group. Valid values for function names are listed below, including + which pingroups can be muxed to them. +- supported generic pinconfig properties (for further details see + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt): + - bias-disable + - bias-high-impedance + - bias-bus-hold + - bias-pull-up + - bias-pull-down + - input-schmitt-enable + - input-schmitt-disable + - slew-rate: Integer, control slew rate of pins. + 0: slow (half frequency) + 1: fast + - drive-strength: Integer, control drive strength of pins in mA. + 2: 2mA + 4: 4mA + 8: 8mA + 12: 12mA + - low-power-enable: Flag, power-on-start weak pull-down for invalid power. + - low-power-disable: Flag, power-on-start weak pull-down disabled. + +Note that many of these properties are only valid for certain specific pins +or groups. See the TZ1090 TRM for complete details regarding which groups +support which functionality. The Linux pinctrl driver may also be a useful +reference. + +Valid values for pin and group names are: + + pins: + + These all support bias-high-impediance, bias-pull-up, bias-pull-down, and + bias-bus-hold (which can also be provided to any of the groups below to set + it for all gpio pins in that group). + + gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data, ext_power. + + mux groups: + + These all support function. + + gpio0 + pins: gpio0. + function: ir_mod_stable_out. + gpio1 + pins: gpio1. + function: ir_mod_power_out. + + drive groups: + + These support input-schmitt-enable, input-schmitt-disable, slew-rate, + drive-strength, low-power-enable, and low-power-disable. + + pdc + pins: gpio0, gpio1, sys_wake0, sys_wake1, sys_wake2, ir_data, + ext_power. + +Example: + + pinctrl_pdc: pinctrl@02006500 { + #gpio-range-cells = <3>; + compatible = "img,tz1090-pdc-pinctrl"; + reg = <0x02006500 0x100>; + }; + +Example board file extracts: + + &pinctrl_pdc { + pinctrl-names = "default"; + pinctrl-0 = <&syswake_default>; + + syswake_default: syswakes { + syswake_cfg { + tz1090,pins = "sys_wake0", + "sys_wake1", + "sys_wake2"; + pull-up; + }; + }; + irmod_default: irmod { + gpio0_cfg { + tz1090,pins = "gpio0"; + tz1090,function = "ir_mod_stable_out"; + }; + gpio1_cfg { + tz1090,pins = "gpio1"; + tz1090,function = "ir_mod_power_out"; + }; + }; + }; + + ir: ir@02006200 { + pinctrl-names = "default"; + pinctrl-0 = <&irmod_default>; + }; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index acdaa08b325c..74ec8348eed6 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -218,6 +218,12 @@ config PINCTRL_TZ1090 select PINMUX select GENERIC_PINCONF +config PINCTRL_TZ1090_PDC + bool "Toumaz Xenif TZ1090 PDC pin control driver" + depends on SOC_TZ1090 + select PINMUX + select PINCONF + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 37ff29e1bba3..cf699a519e9a 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o +obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c new file mode 100644 index 000000000000..12e480869468 --- /dev/null +++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c @@ -0,0 +1,1029 @@ +/* + * Pinctrl driver for the Toumaz Xenif TZ1090 PowerDown Controller pins + * + * Copyright (c) 2013, Imagination Technologies Ltd. + * + * Derived from Tegra code: + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * + * Derived from code: + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010 NVIDIA Corporation + * Copyright (C) 2009-2011 ST-Ericsson AB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The registers may be shared with other threads/cores, so we need to use the + * metag global lock2 for atomicity. + */ +#include + +#include "core.h" +#include "pinconf.h" + +/* Register offsets from bank base address */ +#define REG_GPIO_CONTROL0 0x00 +#define REG_GPIO_CONTROL2 0x08 + +/* Register field information */ +#define REG_GPIO_CONTROL2_PU_PD_S 16 +#define REG_GPIO_CONTROL2_PDC_POS_S 4 +#define REG_GPIO_CONTROL2_PDC_DR_S 2 +#define REG_GPIO_CONTROL2_PDC_SR_S 1 +#define REG_GPIO_CONTROL2_PDC_SCHMITT_S 0 + +/* PU_PD field values */ +#define REG_PU_PD_TRISTATE 0 +#define REG_PU_PD_UP 1 +#define REG_PU_PD_DOWN 2 +#define REG_PU_PD_REPEATER 3 + +/* DR field values */ +#define REG_DR_2mA 0 +#define REG_DR_4mA 1 +#define REG_DR_8mA 2 +#define REG_DR_12mA 3 + +/** + * struct tz1090_pdc_function - TZ1090 PDC pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct tz1090_pdc_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +/** + * struct tz1090_pdc_pingroup - TZ1090 PDC pin group + * @name: Name of pin group. + * @pins: Array of pin numbers in this pin group. + * @npins: Number of pins in this pin group. + * @func: Function enabled by the mux. + * @reg: Mux register offset. + * @bit: Mux register bit. + * @drv: Drive control supported, otherwise it's a mux. + * This means Schmitt, Slew, and Drive strength. + * + * A representation of a group of pins (possibly just one pin) in the TZ1090 + * PDC pin controller. Each group allows some parameter or parameters to be + * configured. The most common is mux function selection. + */ +struct tz1090_pdc_pingroup { + const char *name; + const unsigned int *pins; + unsigned int npins; + int func; + u16 reg; + u8 bit; + bool drv; +}; + +/* + * All PDC pins can be GPIOs. Define these first to match how the GPIO driver + * names/numbers its pins. + */ + +enum tz1090_pdc_pin { + TZ1090_PDC_PIN_GPIO0, + TZ1090_PDC_PIN_GPIO1, + TZ1090_PDC_PIN_SYS_WAKE0, + TZ1090_PDC_PIN_SYS_WAKE1, + TZ1090_PDC_PIN_SYS_WAKE2, + TZ1090_PDC_PIN_IR_DATA, + TZ1090_PDC_PIN_EXT_POWER, +}; + +/* Pin names */ + +static const struct pinctrl_pin_desc tz1090_pdc_pins[] = { + /* PDC GPIOs */ + PINCTRL_PIN(TZ1090_PDC_PIN_GPIO0, "gpio0"), + PINCTRL_PIN(TZ1090_PDC_PIN_GPIO1, "gpio1"), + PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE0, "sys_wake0"), + PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE1, "sys_wake1"), + PINCTRL_PIN(TZ1090_PDC_PIN_SYS_WAKE2, "sys_wake2"), + PINCTRL_PIN(TZ1090_PDC_PIN_IR_DATA, "ir_data"), + PINCTRL_PIN(TZ1090_PDC_PIN_EXT_POWER, "ext_power"), +}; + +/* Pin group pins */ + +static const unsigned int gpio0_pins[] = { + TZ1090_PDC_PIN_GPIO0, +}; + +static const unsigned int gpio1_pins[] = { + TZ1090_PDC_PIN_GPIO1, +}; + +static const unsigned int pdc_pins[] = { + TZ1090_PDC_PIN_GPIO0, + TZ1090_PDC_PIN_GPIO1, + TZ1090_PDC_PIN_SYS_WAKE0, + TZ1090_PDC_PIN_SYS_WAKE1, + TZ1090_PDC_PIN_SYS_WAKE2, + TZ1090_PDC_PIN_IR_DATA, + TZ1090_PDC_PIN_EXT_POWER, +}; + +/* Mux functions */ + +enum tz1090_pdc_mux { + /* PDC_GPIO0 mux */ + TZ1090_PDC_MUX_IR_MOD_STABLE_OUT, + /* PDC_GPIO1 mux */ + TZ1090_PDC_MUX_IR_MOD_POWER_OUT, +}; + +/* Pin groups a function can be muxed to */ + +static const char * const gpio0_groups[] = { + "gpio0", +}; + +static const char * const gpio1_groups[] = { + "gpio1", +}; + +#define FUNCTION(mux, fname, group) \ + [(TZ1090_PDC_MUX_ ## mux)] = { \ + .name = #fname, \ + .groups = group##_groups, \ + .ngroups = ARRAY_SIZE(group##_groups), \ + } + +/* Must correlate with enum tz1090_pdc_mux */ +static const struct tz1090_pdc_function tz1090_pdc_functions[] = { + /* MUX fn pingroups */ + FUNCTION(IR_MOD_STABLE_OUT, ir_mod_stable_out, gpio0), + FUNCTION(IR_MOD_POWER_OUT, ir_mod_power_out, gpio1), +}; + +/** + * MUX_PG() - Initialise a pin group with mux control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + * @f0: Function 0 (TZ1090_PDC_MUX_ is prepended) + * @mux_r: Mux register (REG_PINCTRL_ is prepended) + * @mux_b: Bit number in register of mux field + */ +#define MUX_PG(pg_name, f0, mux_r, mux_b) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .func = TZ1090_PDC_MUX_ ## f0, \ + .reg = (REG_ ## mux_r), \ + .bit = (mux_b), \ + } + +/** + * DRV_PG() - Initialise a pin group with drive control + * @pg_name: Pin group name (stringified, _pins appended to get pins array) + */ +#define DRV_PG(pg_name) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .drv = true, \ + } + +static const struct tz1090_pdc_pingroup tz1090_pdc_groups[] = { + /* Muxing pin groups */ + /* pg_name, f0, mux register, mux bit */ + MUX_PG(gpio0, IR_MOD_STABLE_OUT, GPIO_CONTROL0, 7), + MUX_PG(gpio1, IR_MOD_POWER_OUT, GPIO_CONTROL0, 6), + + /* Drive pin groups */ + /* pg_name */ + DRV_PG(pdc), +}; + +/** + * struct tz1090_pdc_pmx - Private pinctrl data + * @dev: Platform device + * @pctl: Pin control device + * @regs: Register region + * @lock: Lock protecting coherency of mux_en and gpio_en + * @mux_en: Muxes that have been enabled + * @gpio_en: Muxable GPIOs that have been enabled + */ +struct tz1090_pdc_pmx { + struct device *dev; + struct pinctrl_dev *pctl; + void __iomem *regs; + spinlock_t lock; + u32 mux_en; + u32 gpio_en; +}; + +static inline u32 pmx_read(struct tz1090_pdc_pmx *pmx, u32 reg) +{ + return ioread32(pmx->regs + reg); +} + +static inline void pmx_write(struct tz1090_pdc_pmx *pmx, u32 val, u32 reg) +{ + iowrite32(val, pmx->regs + reg); +} + +/* + * Pin control operations + */ + +static int tz1090_pdc_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_pdc_groups); +} + +static const char *tz1090_pdc_pinctrl_get_group_name(struct pinctrl_dev *pctl, + unsigned int group) +{ + return tz1090_pdc_groups[group].name; +} + +static int tz1090_pdc_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int group, + const unsigned int **pins, + unsigned int *num_pins) +{ + *pins = tz1090_pdc_groups[group].pins; + *num_pins = tz1090_pdc_groups[group].npins; + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static void tz1090_pdc_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned int offset) +{ + seq_printf(s, " %s", dev_name(pctldev->dev)); +} +#endif + +static int reserve_map(struct device *dev, struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + unsigned int reserve) +{ + unsigned int old_num = *reserved_maps; + unsigned int new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) { + dev_err(dev, "krealloc(map) failed\n"); + return -ENOMEM; + } + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int add_map_mux(struct pinctrl_map **map, unsigned int *reserved_maps, + unsigned int *num_maps, const char *group, + const char *function) +{ + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +/** + * get_group_selector() - returns the group selector for a group + * @pin_group: the pin group to look up + * + * This is the same as pinctrl_get_group_selector except it doesn't produce an + * error message if the group isn't found or debug messages. + */ +static int get_group_selector(const char *pin_group) +{ + unsigned int group; + + for (group = 0; group < ARRAY_SIZE(tz1090_pdc_groups); ++group) + if (!strcmp(tz1090_pdc_groups[group].name, pin_group)) + return group; + + return -EINVAL; +} + +static int add_map_configs(struct device *dev, + struct pinctrl_map **map, + unsigned int *reserved_maps, unsigned int *num_maps, + const char *group, unsigned long *configs, + unsigned int num_configs) +{ + unsigned long *dup_configs; + enum pinctrl_map_type type; + + if (WARN_ON(*num_maps == *reserved_maps)) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) { + dev_err(dev, "kmemdup(configs) failed\n"); + return -ENOMEM; + } + + /* + * We support both pins and pin groups, but we need to figure out which + * one we have. + */ + if (get_group_selector(group) >= 0) + type = PIN_MAP_TYPE_CONFIGS_GROUP; + else + type = PIN_MAP_TYPE_CONFIGS_PIN; + (*map)[*num_maps].type = type; + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +static void tz1090_pdc_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned int num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + + kfree(map); +} + +static int tz1090_pdc_pinctrl_dt_subnode_to_map(struct device *dev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *reserved_maps, + unsigned int *num_maps) +{ + int ret; + const char *function; + unsigned long *configs = NULL; + unsigned int num_configs = 0; + unsigned int reserve; + struct property *prop; + const char *group; + + ret = of_property_read_string(np, "tz1090,function", &function); + if (ret < 0) { + /* EINVAL=missing, which is fine since it's optional */ + if (ret != -EINVAL) + dev_err(dev, + "could not parse property function\n"); + function = NULL; + } + + ret = pinconf_generic_parse_dt_config(np, &configs, &num_configs); + if (ret) + return ret; + + reserve = 0; + if (function != NULL) + reserve++; + if (num_configs) + reserve++; + ret = of_property_count_strings(np, "tz1090,pins"); + if (ret < 0) { + dev_err(dev, "could not parse property pins\n"); + goto exit; + } + reserve *= ret; + + ret = reserve_map(dev, map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "tz1090,pins", prop, group) { + if (function) { + ret = add_map_mux(map, reserved_maps, num_maps, + group, function); + if (ret < 0) + goto exit; + } + + if (num_configs) { + ret = add_map_configs(dev, map, reserved_maps, + num_maps, group, configs, + num_configs); + if (ret < 0) + goto exit; + } + } + + ret = 0; + +exit: + kfree(configs); + return ret; +} + +static int tz1090_pdc_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + unsigned int reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = tz1090_pdc_pinctrl_dt_subnode_to_map(pctldev->dev, np, + map, &reserved_maps, + num_maps); + if (ret < 0) { + tz1090_pdc_pinctrl_dt_free_map(pctldev, *map, + *num_maps); + return ret; + } + } + + return 0; +} + +static struct pinctrl_ops tz1090_pdc_pinctrl_ops = { + .get_groups_count = tz1090_pdc_pinctrl_get_groups_count, + .get_group_name = tz1090_pdc_pinctrl_get_group_name, + .get_group_pins = tz1090_pdc_pinctrl_get_group_pins, +#ifdef CONFIG_DEBUG_FS + .pin_dbg_show = tz1090_pdc_pinctrl_pin_dbg_show, +#endif + .dt_node_to_map = tz1090_pdc_pinctrl_dt_node_to_map, + .dt_free_map = tz1090_pdc_pinctrl_dt_free_map, +}; + +/* + * Pin mux operations + */ + +static int tz1090_pdc_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(tz1090_pdc_functions); +} + +static const char *tz1090_pdc_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned int function) +{ + return tz1090_pdc_functions[function].name; +} + +static int tz1090_pdc_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, + unsigned int function, + const char * const **groups, + unsigned int * const num_groups) +{ + *groups = tz1090_pdc_functions[function].groups; + *num_groups = tz1090_pdc_functions[function].ngroups; + + return 0; +} + +/** + * tz1090_pdc_pinctrl_mux() - update mux bit + * @pmx: Pinmux data + * @grp: Pin mux group + */ +static void tz1090_pdc_pinctrl_mux(struct tz1090_pdc_pmx *pmx, + const struct tz1090_pdc_pingroup *grp) +{ + u32 reg, select; + unsigned int pin_shift = grp->pins[0]; + unsigned long flags; + + /* select = mux && !gpio */ + select = ((pmx->mux_en & ~pmx->gpio_en) >> pin_shift) & 1; + + /* set up the mux */ + __global_lock2(flags); + reg = pmx_read(pmx, grp->reg); + reg &= ~BIT(grp->bit); + reg |= select << grp->bit; + pmx_write(pmx, reg, grp->reg); + __global_unlock2(flags); +} + +static int tz1090_pdc_pinctrl_enable(struct pinctrl_dev *pctldev, + unsigned int function, unsigned int group) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *grp = &tz1090_pdc_groups[group]; + + dev_dbg(pctldev->dev, "%s(func=%u (%s), group=%u (%s))\n", + __func__, + function, tz1090_pdc_functions[function].name, + group, tz1090_pdc_groups[group].name); + + /* is it even a mux? */ + if (grp->drv) + return -EINVAL; + + /* does this group even control the function? */ + if (function != grp->func) + return -EINVAL; + + /* record the pin being muxed and update mux bit */ + spin_lock(&pmx->lock); + pmx->mux_en |= BIT(grp->pins[0]); + tz1090_pdc_pinctrl_mux(pmx, grp); + spin_unlock(&pmx->lock); + return 0; +} + +static void tz1090_pdc_pinctrl_disable(struct pinctrl_dev *pctldev, + unsigned int function, + unsigned int group) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *grp = &tz1090_pdc_groups[group]; + + dev_dbg(pctldev->dev, "%s(func=%u (%s), group=%u (%s))\n", + __func__, + function, tz1090_pdc_functions[function].name, + group, tz1090_pdc_groups[group].name); + + /* is it even a mux? */ + if (grp->drv) + return; + + /* does this group even control the function? */ + if (function != grp->func) + return; + + /* record the pin being unmuxed and update mux bit */ + spin_lock(&pmx->lock); + pmx->mux_en &= ~BIT(grp->pins[0]); + tz1090_pdc_pinctrl_mux(pmx, grp); + spin_unlock(&pmx->lock); +} + +static const struct tz1090_pdc_pingroup *find_mux_group( + struct tz1090_pdc_pmx *pmx, + unsigned int pin) +{ + const struct tz1090_pdc_pingroup *grp; + unsigned int group; + + grp = tz1090_pdc_groups; + for (group = 0; group < ARRAY_SIZE(tz1090_pdc_groups); ++group, ++grp) { + /* only match muxes */ + if (grp->drv) + continue; + + /* with a matching pin */ + if (grp->pins[0] == pin) + return grp; + } + + return NULL; +} + +static int tz1090_pdc_pinctrl_gpio_request_enable( + struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *grp = find_mux_group(pmx, pin); + + if (grp) { + /* record the pin in GPIO use and update mux bit */ + spin_lock(&pmx->lock); + pmx->gpio_en |= BIT(pin); + tz1090_pdc_pinctrl_mux(pmx, grp); + spin_unlock(&pmx->lock); + } + return 0; +} + +static void tz1090_pdc_pinctrl_gpio_disable_free( + struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *grp = find_mux_group(pmx, pin); + + if (grp) { + /* record the pin not in GPIO use and update mux bit */ + spin_lock(&pmx->lock); + pmx->gpio_en &= ~BIT(pin); + tz1090_pdc_pinctrl_mux(pmx, grp); + spin_unlock(&pmx->lock); + } +} + +static struct pinmux_ops tz1090_pdc_pinmux_ops = { + .get_functions_count = tz1090_pdc_pinctrl_get_funcs_count, + .get_function_name = tz1090_pdc_pinctrl_get_func_name, + .get_function_groups = tz1090_pdc_pinctrl_get_func_groups, + .enable = tz1090_pdc_pinctrl_enable, + .disable = tz1090_pdc_pinctrl_disable, + .gpio_request_enable = tz1090_pdc_pinctrl_gpio_request_enable, + .gpio_disable_free = tz1090_pdc_pinctrl_gpio_disable_free, +}; + +/* + * Pin config operations + */ + +static int tz1090_pdc_pinconf_reg(struct pinctrl_dev *pctldev, + unsigned int pin, + enum pin_config_param param, + bool report_err, + u32 *reg, u32 *width, u32 *mask, u32 *shift, + u32 *val) +{ + /* Find information about parameter's register */ + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + *val = REG_PU_PD_TRISTATE; + break; + case PIN_CONFIG_BIAS_PULL_UP: + *val = REG_PU_PD_UP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + *val = REG_PU_PD_DOWN; + break; + case PIN_CONFIG_BIAS_BUS_HOLD: + *val = REG_PU_PD_REPEATER; + break; + default: + return -ENOTSUPP; + }; + + /* Only input bias parameters supported */ + *reg = REG_GPIO_CONTROL2; + *shift = REG_GPIO_CONTROL2_PU_PD_S + pin*2; + *width = 2; + + /* Calculate field information */ + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pdc_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long *config) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + int ret; + u32 reg, width, mask, shift, val, tmp, arg; + + /* Get register information */ + ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Extract field from register */ + tmp = pmx_read(pmx, reg); + arg = ((tmp & mask) >> shift) == val; + + /* Config not active */ + if (!arg) + return -EINVAL; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pdc_pinconf_set(struct pinctrl_dev *pctldev, + unsigned int pin, unsigned long config) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(config); + unsigned int arg = pinconf_to_config_argument(config); + int ret; + u32 reg, width, mask, shift, val, tmp; + unsigned long flags; + + dev_dbg(pctldev->dev, "%s(pin=%s, config=%#lx)\n", + __func__, tz1090_pdc_pins[pin].name, config); + + /* Get register information */ + ret = tz1090_pdc_pinconf_reg(pctldev, pin, param, true, + ®, &width, &mask, &shift, &val); + if (ret < 0) + return ret; + + /* Unpack argument and range check it */ + if (arg > 1) { + dev_dbg(pctldev->dev, "%s: arg %u out of range\n", + __func__, arg); + return -EINVAL; + } + + /* Write register field */ + __global_lock2(flags); + tmp = pmx_read(pmx, reg); + tmp &= ~mask; + if (arg) + tmp |= val << shift; + pmx_write(pmx, tmp, reg); + __global_unlock2(flags); + + return 0; +} + +static const int tz1090_pdc_boolean_map[] = { + [0] = -EINVAL, + [1] = 1, +}; + +static const int tz1090_pdc_dr_map[] = { + [REG_DR_2mA] = 2, + [REG_DR_4mA] = 4, + [REG_DR_8mA] = 8, + [REG_DR_12mA] = 12, +}; + +static int tz1090_pdc_pinconf_group_reg(struct pinctrl_dev *pctldev, + const struct tz1090_pdc_pingroup *g, + enum pin_config_param param, + bool report_err, u32 *reg, u32 *width, + u32 *mask, u32 *shift, const int **map) +{ + /* Drive configuration applies in groups, but not to all groups. */ + if (!g->drv) { + if (report_err) + dev_dbg(pctldev->dev, + "%s: group %s has no drive control\n", + __func__, g->name); + return -ENOTSUPP; + } + + /* Find information about drive parameter's register */ + *reg = REG_GPIO_CONTROL2; + switch (param) { + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + *shift = REG_GPIO_CONTROL2_PDC_SCHMITT_S; + *width = 1; + *map = tz1090_pdc_boolean_map; + break; + case PIN_CONFIG_SLEW_RATE: + *shift = REG_GPIO_CONTROL2_PDC_SR_S; + *width = 1; + *map = tz1090_pdc_boolean_map; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + *shift = REG_GPIO_CONTROL2_PDC_DR_S; + *width = 2; + *map = tz1090_pdc_dr_map; + break; + case PIN_CONFIG_LOW_POWER_MODE: + *shift = REG_GPIO_CONTROL2_PDC_POS_S; + *width = 1; + *map = tz1090_pdc_boolean_map; + break; + default: + return -ENOTSUPP; + }; + + /* Calculate field information */ + *mask = (BIT(*width) - 1) << *shift; + + return 0; +} + +static int tz1090_pdc_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long *config) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group]; + enum pin_config_param param = pinconf_to_config_param(*config); + int ret, arg; + u32 reg, width, mask, shift, val; + const int *map; + + /* Get register information */ + ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) + return ret; + + /* Extract field from register */ + val = pmx_read(pmx, reg); + arg = map[(val & mask) >> shift]; + if (arg < 0) + return arg; + + /* And pack config */ + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int tz1090_pdc_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long config) +{ + struct tz1090_pdc_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); + const struct tz1090_pdc_pingroup *g = &tz1090_pdc_groups[group]; + enum pin_config_param param = pinconf_to_config_param(config); + const unsigned int *pit; + unsigned int i; + int ret, arg; + u32 reg, width, mask, shift, val; + unsigned long flags; + const int *map; + + dev_dbg(pctldev->dev, "%s(group=%s, config=%#lx)\n", + __func__, g->name, config); + + /* Get register information */ + ret = tz1090_pdc_pinconf_group_reg(pctldev, g, param, true, + ®, &width, &mask, &shift, &map); + if (ret < 0) { + /* + * Maybe we're trying to set a per-pin configuration of a group, + * so do the pins one by one. This is mainly as a convenience. + */ + for (i = 0, pit = g->pins; i < g->npins; ++i, ++pit) { + ret = tz1090_pdc_pinconf_set(pctldev, *pit, config); + if (ret) + return ret; + } + return 0; + } + + /* Unpack argument and map it to register value */ + arg = pinconf_to_config_argument(config); + for (i = 0; i < BIT(width); ++i) { + if (map[i] == arg || (map[i] == -EINVAL && !arg)) { + /* Write register field */ + __global_lock2(flags); + val = pmx_read(pmx, reg); + val &= ~mask; + val |= i << shift; + pmx_write(pmx, val, reg); + __global_unlock2(flags); + return 0; + } + } + + dev_dbg(pctldev->dev, "%s: arg %u not supported\n", + __func__, arg); + return 0; +} + +static struct pinconf_ops tz1090_pdc_pinconf_ops = { + .is_generic = true, + .pin_config_get = tz1090_pdc_pinconf_get, + .pin_config_set = tz1090_pdc_pinconf_set, + .pin_config_group_get = tz1090_pdc_pinconf_group_get, + .pin_config_group_set = tz1090_pdc_pinconf_group_set, + .pin_config_config_dbg_show = pinconf_generic_dump_config, +}; + +/* + * Pin control driver setup + */ + +static struct pinctrl_desc tz1090_pdc_pinctrl_desc = { + .pctlops = &tz1090_pdc_pinctrl_ops, + .pmxops = &tz1090_pdc_pinmux_ops, + .confops = &tz1090_pdc_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int tz1090_pdc_pinctrl_probe(struct platform_device *pdev) +{ + struct tz1090_pdc_pmx *pmx; + struct resource *res; + + pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL); + if (!pmx) { + dev_err(&pdev->dev, "Can't alloc tz1090_pdc_pmx\n"); + return -ENOMEM; + } + pmx->dev = &pdev->dev; + spin_lock_init(&pmx->lock); + + tz1090_pdc_pinctrl_desc.name = dev_name(&pdev->dev); + tz1090_pdc_pinctrl_desc.pins = tz1090_pdc_pins; + tz1090_pdc_pinctrl_desc.npins = ARRAY_SIZE(tz1090_pdc_pins); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing MEM resource\n"); + return -ENODEV; + } + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, + "Couldn't request MEM resource\n"); + return -ENODEV; + } + + pmx->regs = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!pmx->regs) { + dev_err(&pdev->dev, "Couldn't ioremap regs\n"); + return -ENODEV; + } + + pmx->pctl = pinctrl_register(&tz1090_pdc_pinctrl_desc, &pdev->dev, pmx); + if (!pmx->pctl) { + dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); + return -ENODEV; + } + + platform_set_drvdata(pdev, pmx); + + dev_info(&pdev->dev, "TZ1090 PDC pinctrl driver initialised\n"); + + return 0; +} + +static int tz1090_pdc_pinctrl_remove(struct platform_device *pdev) +{ + struct tz1090_pdc_pmx *pmx = platform_get_drvdata(pdev); + + pinctrl_unregister(pmx->pctl); + + return 0; +} + +static struct of_device_id tz1090_pdc_pinctrl_of_match[] = { + { .compatible = "img,tz1090-pdc-pinctrl", }, + { }, +}; + +static struct platform_driver tz1090_pdc_pinctrl_driver = { + .driver = { + .name = "tz1090-pdc-pinctrl", + .owner = THIS_MODULE, + .of_match_table = tz1090_pdc_pinctrl_of_match, + }, + .probe = tz1090_pdc_pinctrl_probe, + .remove = tz1090_pdc_pinctrl_remove, +}; + +static int __init tz1090_pdc_pinctrl_init(void) +{ + return platform_driver_register(&tz1090_pdc_pinctrl_driver); +} +arch_initcall(tz1090_pdc_pinctrl_init); + +static void __exit tz1090_pdc_pinctrl_exit(void) +{ + platform_driver_unregister(&tz1090_pdc_pinctrl_driver); +} +module_exit(tz1090_pdc_pinctrl_exit); + +MODULE_AUTHOR("Imagination Technologies Ltd."); +MODULE_DESCRIPTION("Toumaz Xenif TZ1090 PDC pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, tz1090_pdc_pinctrl_of_match); -- cgit v1.2.3 From ad42fc6c84795d19972e7f7dee70fe74bec4c2d8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 24 Jun 2013 15:06:19 +0200 Subject: pinctrl: rip out the direct pinconf API From the inception ot the pin config API there has been the possibility to get a handle at a pin directly and configure its electrical characteristics. For this reason we had: int pin_config_get(const char *dev_name, const char *name, unsigned long *config); int pin_config_set(const char *dev_name, const char *name, unsigned long config); int pin_config_group_get(const char *dev_name, const char *pin_group, unsigned long *config); int pin_config_group_set(const char *dev_name, const char *pin_group, unsigned long config); After the introduction of the pin control states that will control pins associated with devices, and its subsequent introduction to the device core, as well as the introduction of pin control hogs that can set up states on boot and optionally also at sleep, this direct pin control API is a thing of the past. As could be expected, it has zero in-kernel users. Let's delete this API and make our world simpler. Reported-by: Tony Lindgren Reviewed-by: Stephen Warren Acked-by: Tony Lindgren Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 11 +-- drivers/pinctrl/pinconf.c | 174 --------------------------------------- include/linux/pinctrl/consumer.h | 43 ---------- 3 files changed, 2 insertions(+), 226 deletions(-) (limited to 'Documentation') diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 3ee24759be0f..c5948c7d662a 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -203,15 +203,8 @@ using a certain resistor value - pull up and pull down - so that the pin has a stable value when nothing is driving the rail it is connected to, or when it's unconnected. -Pin configuration can be programmed either using the explicit APIs described -immediately below, or by adding configuration entries into the mapping table; -see section "Board/machine configuration" below. - -For example, a platform may do the following to pull up a pin to VDD: - -#include - -ret = pin_config_set("foo-dev", "FOO_GPIO_PIN", PLATFORM_X_PULL_UP); +Pin configuration can be programmed by adding configuration entries into the +mapping table; see section "Board/machine configuration" below. The format and meaning of the configuration parameter, PLATFORM_X_PULL_UP above, is entirely defined by the pin controller driver. diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 694c3ace4520..e875f21a5908 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -75,98 +75,6 @@ int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, return ops->pin_config_get(pctldev, pin, config); } -/** - * pin_config_get() - get the configuration of a single pin parameter - * @dev_name: name of the pin controller device for this pin - * @name: name of the pin to get the config for - * @config: the config pointed to by this argument will be filled in with the - * current pin state, it can be used directly by drivers as a numeral, or - * it can be dereferenced to any struct. - */ -int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - struct pinctrl_dev *pctldev; - int pin; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - pin = -EINVAL; - return pin; - } - - mutex_lock(&pctldev->mutex); - - pin = pin_get_from_name(pctldev, name); - if (pin < 0) - goto unlock; - - pin = pin_config_get_for_pin(pctldev, pin, config); - -unlock: - mutex_unlock(&pctldev->mutex); - return pin; -} -EXPORT_SYMBOL(pin_config_get); - -static int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin, - unsigned long config) -{ - const struct pinconf_ops *ops = pctldev->desc->confops; - int ret; - - if (!ops || !ops->pin_config_set) { - dev_err(pctldev->dev, "cannot configure pin, missing " - "config function in driver\n"); - return -EINVAL; - } - - ret = ops->pin_config_set(pctldev, pin, config); - if (ret) { - dev_err(pctldev->dev, - "unable to set pin configuration on pin %d\n", pin); - return ret; - } - - return 0; -} - -/** - * pin_config_set() - set the configuration of a single pin parameter - * @dev_name: name of pin controller device for this pin - * @name: name of the pin to set the config for - * @config: the config in this argument will contain the desired pin state, it - * can be used directly by drivers as a numeral, or it can be dereferenced - * to any struct. - */ -int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - struct pinctrl_dev *pctldev; - int pin, ret; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - ret = -EINVAL; - return ret; - } - - mutex_lock(&pctldev->mutex); - - pin = pin_get_from_name(pctldev, name); - if (pin < 0) { - ret = pin; - goto unlock; - } - - ret = pin_config_set_for_pin(pctldev, pin, config); - -unlock: - mutex_unlock(&pctldev->mutex); - return ret; -} -EXPORT_SYMBOL(pin_config_set); - int pin_config_group_get(const char *dev_name, const char *pin_group, unsigned long *config) { @@ -204,88 +112,6 @@ unlock: mutex_unlock(&pctldev->mutex); return ret; } -EXPORT_SYMBOL(pin_config_group_get); - -int pin_config_group_set(const char *dev_name, const char *pin_group, - unsigned long config) -{ - struct pinctrl_dev *pctldev; - const struct pinconf_ops *ops; - const struct pinctrl_ops *pctlops; - int selector; - const unsigned *pins; - unsigned num_pins; - int ret; - int i; - - pctldev = get_pinctrl_dev_from_devname(dev_name); - if (!pctldev) { - ret = -EINVAL; - return ret; - } - - mutex_lock(&pctldev->mutex); - - ops = pctldev->desc->confops; - pctlops = pctldev->desc->pctlops; - - if (!ops || (!ops->pin_config_group_set && !ops->pin_config_set)) { - dev_err(pctldev->dev, "cannot configure pin group, missing " - "config function in driver\n"); - ret = -EINVAL; - goto unlock; - } - - selector = pinctrl_get_group_selector(pctldev, pin_group); - if (selector < 0) { - ret = selector; - goto unlock; - } - - ret = pctlops->get_group_pins(pctldev, selector, &pins, &num_pins); - if (ret) { - dev_err(pctldev->dev, "cannot configure pin group, error " - "getting pins\n"); - goto unlock; - } - - /* - * If the pin controller supports handling entire groups we use that - * capability. - */ - if (ops->pin_config_group_set) { - ret = ops->pin_config_group_set(pctldev, selector, config); - /* - * If the pin controller prefer that a certain group be handled - * pin-by-pin as well, it returns -EAGAIN. - */ - if (ret != -EAGAIN) - goto unlock; - } - - /* - * If the controller cannot handle entire groups, we configure each pin - * individually. - */ - if (!ops->pin_config_set) { - ret = 0; - goto unlock; - } - - for (i = 0; i < num_pins; i++) { - ret = ops->pin_config_set(pctldev, pins[i], config); - if (ret < 0) - goto unlock; - } - - ret = 0; - -unlock: - mutex_unlock(&pctldev->mutex); - - return ret; -} -EXPORT_SYMBOL(pin_config_group_set); int pinconf_map_to_setting(struct pinctrl_map const *map, struct pinctrl_setting *setting) diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index d071d850d1de..18eccefea06e 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -192,47 +192,4 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select_default( return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); } -#ifdef CONFIG_PINCONF - -extern int pin_config_get(const char *dev_name, const char *name, - unsigned long *config); -extern int pin_config_set(const char *dev_name, const char *name, - unsigned long config); -extern int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config); -extern int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config); - -#else - -static inline int pin_config_get(const char *dev_name, const char *name, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_set(const char *dev_name, const char *name, - unsigned long config) -{ - return 0; -} - -static inline int pin_config_group_get(const char *dev_name, - const char *pin_group, - unsigned long *config) -{ - return 0; -} - -static inline int pin_config_group_set(const char *dev_name, - const char *pin_group, - unsigned long config) -{ - return 0; -} - -#endif - #endif /* __LINUX_PINCTRL_CONSUMER_H */ -- cgit v1.2.3 From 70637a6dcaa6e4cb707d0d50a7ea448f13438786 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 25 Jun 2013 14:55:42 +0200 Subject: pinctrl: more clarifications for generic pull configs PULL_PIN_DEFAULT is meant for hardware completely hiding any pull settings from the driver, so that it's really only possible to turn the pull on or off, but it not being possible to determine any pull settings from software. Also the binding-documentation for the pull arguments did not match the changes to the expected values. Signed-off-by: Heiko Stuebner Reviewed-by: James Hogan Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 5 ++--- include/linux/pinctrl/pinconf-generic.h | 5 ++++- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 2d730e3dd496..7498bdc00e19 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -165,9 +165,8 @@ output-high - set the pin to output mode with high level Arguments for parameters: -- bias-pull-up, -down and -pin-default take as optional argument 0 to disable - the pull, on hardware supporting it the pull strength in Ohm. bias-disable - will also disable any active pull. +- bias-pull-up, -down and -pin-default take as optional argument on hardware + supporting it the pull strength in Ohm. bias-disable will disable the pull. - drive-strength takes as argument the target strength in mA. diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 10ad996afee4..48aa4ba7b089 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -41,7 +41,10 @@ * impedance to GROUND). If the argument is != 0 pull-down is enabled, * if it is 0, pull-down is total, i.e. the pin is connected to GROUND. * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based - * on embedded knowledge of the controller, like current mux function. + * on embedded knowledge of the controller hardware, like current mux + * function. The pull direction and possibly strength too will normally + * be decided completely inside the hardware block and not be readable + * from the kernel side. * If the argument is != 0 pull up/down is enabled, if it is 0, the * configuration is ignored. The proper way to disable it is to use * @PIN_CONFIG_BIAS_DISABLE. -- cgit v1.2.3 From 256aeb648741bf095e884793862d3dfa6b1c1fb5 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 25 Jun 2013 14:56:11 +0200 Subject: pinctrl: set unit for debounce time pinconfig to usec Currently the debounce time pinconfig option uses an unspecified "time units" unit. As pinconfig options should use SI units and a real unit is also necessary for generic dt bindings, change it to usec. Currently no driver is using the generic pinconfig option for this, so the unit change is safe to do. Signed-off-by: Heiko Stuebner Reviewed-by: James Hogan Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 3 ++- drivers/pinctrl/pinconf-generic.c | 2 +- include/linux/pinctrl/pinconf-generic.h | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 7498bdc00e19..788ab09e4c1c 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -173,7 +173,8 @@ Arguments for parameters: - input-schmitt takes as argument the adjustable hysteresis in a driver-specific format -- input-debounce takes the debounce time as argument or 0 to disable debouncing +- input-debounce takes the debounce time in usec as argument + or 0 to disable debouncing - power-source argument is the custom value describing the source to select diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 794dad7d68d8..2b271d5d90bf 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -49,7 +49,7 @@ static struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength", "mA"), PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL), PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL), - PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"), + PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "usec"), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL), PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"), diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 48aa4ba7b089..bf7e989abcb5 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -70,7 +70,7 @@ * setting pins to this mode. * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, * which means it will wait for signals to settle when reading inputs. The - * argument gives the debounce time on a custom format. Setting the + * argument gives the debounce time in usecs. Setting the * argument to zero turns debouncing off. * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells -- cgit v1.2.3 From a7b3bf55e7435ad38cd17b9da257dc7314d862f6 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 25 Jun 2013 14:56:36 +0200 Subject: pinctrl: remove slew-rate parameter from tz1090 As the binding for slew-rate is under discussion and seems to need more tought it will get removed for now, so it doesn't get an offical release. Therefore remove it again from the only current user, tz1090. Signed-off-by: Heiko Stuebner Reviewed-by: James Hogan Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt | 5 +---- Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt | 7 +------ drivers/pinctrl/pinctrl-tz1090-pdc.c | 5 ----- drivers/pinctrl/pinctrl-tz1090.c | 5 ----- 4 files changed, 2 insertions(+), 20 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index 9f7a85bb8fca..a186181c402b 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -83,7 +80,7 @@ Valid values for pin and group names are: drive groups: - These support input-schmitt-enable, input-schmitt-disable, slew-rate, + These support input-schmitt-enable, input-schmitt-disable, drive-strength, low-power-enable, and low-power-disable. pdc diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 39bfd9cd6bba..4b27c99f7f9d 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -44,9 +44,6 @@ Optional subnode-properties: - bias-pull-down - input-schmitt-enable - input-schmitt-disable - - slew-rate: Integer, control slew rate of pins. - 0: slow (half frequency) - 1: fast - drive-strength: Integer, control drive strength of pins in mA. 2: 2mA 4: 4mA @@ -124,7 +121,6 @@ Valid values for pin and group names are: function: afe, ts_out_0. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. pdm_d pins: pdm_d. @@ -153,12 +149,11 @@ Valid values for pin and group names are: lcd_trace, phy_ringosc. input-schmitt-enable: supported. input-schmitt-disable: supported. - slew-rate: supported. drive-strength: supported. drive groups: - These all support input-schmitt-enable, input-schmitt-disable, slew-rate, + These all support input-schmitt-enable, input-schmitt-disable, and drive-strength. jtag diff --git a/drivers/pinctrl/pinctrl-tz1090-pdc.c b/drivers/pinctrl/pinctrl-tz1090-pdc.c index 12e480869468..d4f12cc556b4 100644 --- a/drivers/pinctrl/pinctrl-tz1090-pdc.c +++ b/drivers/pinctrl/pinctrl-tz1090-pdc.c @@ -809,11 +809,6 @@ static int tz1090_pdc_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_pdc_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *shift = REG_GPIO_CONTROL2_PDC_SR_S; - *width = 1; - *map = tz1090_pdc_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *shift = REG_GPIO_CONTROL2_PDC_DR_S; *width = 2; diff --git a/drivers/pinctrl/pinctrl-tz1090.c b/drivers/pinctrl/pinctrl-tz1090.c index 02ff3a238168..4edae08a0a61 100644 --- a/drivers/pinctrl/pinctrl-tz1090.c +++ b/drivers/pinctrl/pinctrl-tz1090.c @@ -1834,11 +1834,6 @@ static int tz1090_pinconf_group_reg(struct pinctrl_dev *pctldev, *width = 1; *map = tz1090_boolean_map; break; - case PIN_CONFIG_SLEW_RATE: - *reg = REG_PINCTRL_SR; - *width = 1; - *map = tz1090_boolean_map; - break; case PIN_CONFIG_DRIVE_STRENGTH: *reg = REG_PINCTRL_DR; *width = 2; -- cgit v1.2.3 From 5b81d55c4ccf23b9de398f819571dfc8941c7b04 Mon Sep 17 00:00:00 2001 From: Heiko Stübner Date: Tue, 25 Jun 2013 14:57:10 +0200 Subject: pinctrl: remove bindings for pinconf options needing more thought Some options currently take arguments in unspecified driver-specific units. As pointed out by Stephen Warren, driver specific values should not be part of generic devicetree bindings describing the hardware. Therefore remove the critical bindings again, before they become part of an official release. Signed-off-by: Heiko Stuebner Reviewed-by: James Hogan Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 10 ---------- drivers/pinctrl/pinconf-generic.c | 3 --- 2 files changed, 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 788ab09e4c1c..aeb3c995cc04 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -154,10 +154,7 @@ drive-open-source - drive with open source drive-strength - sink or source at most X mA input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode -input-schmitt - run in schmitt-trigger mode with hysteresis X input-debounce - debounce mode with debound time X -power-source - select power source X -slew-rate - use slew-rate X low-power-enable - enable low power mode low-power-disable - disable low power mode output-low - set the pin to output mode with low level @@ -170,16 +167,9 @@ Arguments for parameters: - drive-strength takes as argument the target strength in mA. -- input-schmitt takes as argument the adjustable hysteresis in a - driver-specific format - - input-debounce takes the debounce time in usec as argument or 0 to disable debouncing -- power-source argument is the custom value describing the source to select - -- slew-rate takes as argument the target rate in a driver-specific format - All parameters not listed here, do not take an argument. More in-depth documentation on these parameters can be found in diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 2b271d5d90bf..8594f033ac21 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -161,10 +161,7 @@ static struct pinconf_generic_dt_params dt_params[] = { { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, - { "input-schmitt", PIN_CONFIG_INPUT_SCHMITT, 0 }, { "input-debounce", PIN_CONFIG_INPUT_DEBOUNCE, 0 }, - { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, - { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, -- cgit v1.2.3