From 72f2e2c763edc41f8eead042b6ff933acb0378e2 Mon Sep 17 00:00:00 2001 From: kishore kadiyala Date: Fri, 24 Sep 2010 17:13:20 +0000 Subject: mfd: Adding twl6030 mmc card detect support for MMC1 Adding card detect callback function and card detect configuration function for MMC1 Controller on OMAP4. Card detect configuration function does initial configuration of the MMC Control & PullUp-PullDown registers of Phoenix. For MMC1 Controller, card detect interrupt source is twl6030 which is non-gpio. The card detect call back function provides card present/absent status by reading MMC Control register present on twl6030. Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect, the suspend/resume initialization which was done in omap_hsmmc_gpio_init previously is moved to the probe thus making it generic for both OMAP3 & OMAP4. Cc: Tony Lindgren Cc: Andrew Morton Cc: Madhusudhan Chikkature Cc: Adrian Hunter Signed-off-by: Kishore Kadiyala Signed-off-by: Samuel Ortiz --- arch/arm/mach-omap2/board-4430sdp.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2/board-4430sdp.c') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 69a4ae971e41..df5a425a49d1 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -269,9 +269,14 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev) struct omap_mmc_platform_data *pdata = dev->platform_data; /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) + if (pdev->id == 0) { + ret = twl6030_mmc_card_detect_config(); + if (ret) + pr_err("Failed configuring MMC1 card detect\n"); pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET; + pdata->slots[0].card_detect = twl6030_mmc_card_detect; + } return ret; } -- cgit v1.2.3