From 8ae81c25cfe962a788a28e023d9a78934d807f7d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 29 Jun 2015 22:58:46 +0100 Subject: arm: perf: Set affinity for PPI based PMUs For PPI based PMUs, we bail out early in of_pmu_irq_cfg() without setting the PMU's supported_cpus bitmap. This causes the smp_call_function_any() in armv7_probe_num_events() to fail. Set the bitmap to be all CPUs so that we properly probe PMUs that use PPIs. Fixes: cc88116da0d1 ("arm: perf: treat PMUs as CPU affine") Cc: Mark Rutland Signed-off-by: Stephen Boyd Signed-off-by: Will Deacon --- arch/arm/kernel/perf_event.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 54272e0be713..7d5379c1c443 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -795,8 +795,10 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) /* Don't bother with PPIs; they're already affine */ irq = platform_get_irq(pdev, 0); - if (irq >= 0 && irq_is_percpu(irq)) + if (irq >= 0 && irq_is_percpu(irq)) { + cpumask_setall(&pmu->supported_cpus); return 0; + } irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); if (!irqs) -- cgit v1.2.3 From b6c084d7aa8bca21920cbbe13ad58572fa85ece6 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 29 Jun 2015 13:59:01 +0100 Subject: ARM: perf: extend interrupt-affinity property for PPIs On systems containing multiple, heterogeneous clusters we need a way to associate a PMU "device" with the CPU(s) on which it exists. For PMUs that signal overflow with SPIs, this relationship is determined via the "interrupt-affinity" property, which contains a list of phandles to CPU nodes for the PMU. For PMUs using PPIs, the per-cpu nature of the interrupt isn't enough to determine the set of CPUs which actually contain the device. This patch allows the interrupt-affinity property to be specified on a PMU node irrespective of the interrupt type. For PPIs, it identifies the set of CPUs signalling the PPI in question. Tested-by: Stephen Boyd # Krait PMU Signed-off-by: Will Deacon --- Documentation/devicetree/bindings/arm/pmu.txt | 12 +++-- arch/arm/kernel/perf_event.c | 65 ++++++++++++++++++--------- 2 files changed, 53 insertions(+), 24 deletions(-) (limited to 'arch/arm') diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 3b5f5d1088c6..435251fa9ce0 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -26,13 +26,19 @@ Required properties: Optional properties: -- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles - to CPU nodes corresponding directly to the affinity of +- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU + nodes corresponding directly to the affinity of the SPIs listed in the interrupts property. - This property should be present when there is more than + When using a PPI, specifies a list of phandles to CPU + nodes corresponding to the set of CPUs which have + a PMU of this type signalling the PPI listed in the + interrupts property. + + This property should be present when there is more than a single SPI. + - qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd events. diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 7d5379c1c443..5a8f17bfcc60 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -790,32 +790,39 @@ static int probe_current_pmu(struct arm_pmu *pmu, static int of_pmu_irq_cfg(struct arm_pmu *pmu) { - int i, irq, *irqs; + int *irqs, i = 0; + bool using_spi = false; struct platform_device *pdev = pmu->plat_device; - /* Don't bother with PPIs; they're already affine */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0 && irq_is_percpu(irq)) { - cpumask_setall(&pmu->supported_cpus); - return 0; - } - irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); if (!irqs) return -ENOMEM; - for (i = 0; i < pdev->num_resources; ++i) { + do { struct device_node *dn; - int cpu; + int cpu, irq; - dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", - i); - if (!dn) { - pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", - of_node_full_name(pdev->dev.of_node), i); + /* See if we have an affinity entry */ + dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", i); + if (!dn) break; + + /* Check the IRQ type and prohibit a mix of PPIs and SPIs */ + irq = platform_get_irq(pdev, i); + if (irq >= 0) { + bool spi = !irq_is_percpu(irq); + + if (i > 0 && spi != using_spi) { + pr_err("PPI/SPI IRQ type mismatch for %s!\n", + dn->name); + kfree(irqs); + return -EINVAL; + } + + using_spi = spi; } + /* Now look up the logical CPU number */ for_each_possible_cpu(cpu) if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) break; @@ -824,20 +831,36 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) pr_warn("Failed to find logical CPU for %s\n", dn->name); of_node_put(dn); + cpumask_setall(&pmu->supported_cpus); break; } of_node_put(dn); - irqs[i] = cpu; + /* For SPIs, we need to track the affinity per IRQ */ + if (using_spi) { + if (i >= pdev->num_resources) { + of_node_put(dn); + break; + } + + irqs[i] = cpu; + } + + /* Keep track of the CPUs containing this PMU type */ cpumask_set_cpu(cpu, &pmu->supported_cpus); - } + of_node_put(dn); + i++; + } while (1); - if (i == pdev->num_resources) { + /* If we didn't manage to parse anything, claim to support all CPUs */ + if (cpumask_weight(&pmu->supported_cpus) == 0) + cpumask_setall(&pmu->supported_cpus); + + /* If we matched up the IRQ affinities, use them to route the SPIs */ + if (using_spi && i == pdev->num_resources) pmu->irq_affinity = irqs; - } else { + else kfree(irqs); - cpumask_setall(&pmu->supported_cpus); - } return 0; } -- cgit v1.2.3 From bc1e3c4687df62a1f2ba1b6be11efbeb76145366 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 30 Jun 2015 13:56:57 +0100 Subject: ARM: perf: replace arch_find_n_match_cpu_physical_id with of_cpu_device_node_get arch_find_n_match_cpu_physical_id parses the device tree to get the device node for a given logical cpu index. However, since ARM PMUs get probed after the CPU device nodes are stashed while registering the cpus, we can use of_cpu_device_node_get to avoid another DT parse. This patch replaces arch_find_n_match_cpu_physical_id with of_cpu_device_node_get to reuse the stashed value directly instead. Cc: Will Deacon Cc: Mark Rutland Signed-off-by: Sudeep Holla Signed-off-by: Will Deacon --- arch/arm/kernel/perf_event.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5a8f17bfcc60..1cb40651d783 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include #include @@ -824,7 +824,7 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) /* Now look up the logical CPU number */ for_each_possible_cpu(cpu) - if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) + if (dn == of_cpu_device_node_get(cpu)) break; if (cpu >= nr_cpu_ids) { -- cgit v1.2.3 From fa8ad7889d83bcf0a6cdbf6d3622f3ec019cde14 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Mon, 6 Jul 2015 12:23:53 +0100 Subject: arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo Cc: Greg Kroah-Hartman Cc: Ingo Molnar Cc: Linus Walleij Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Russell King Cc: Will Deacon Signed-off-by: Mark Rutland [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon --- MAINTAINERS | 6 +- arch/arm/Kconfig | 8 +- arch/arm/include/asm/pmu.h | 154 ------ arch/arm/kernel/Makefile | 3 +- arch/arm/kernel/perf_event.c | 921 ------------------------------------ arch/arm/kernel/perf_event_v6.c | 2 +- arch/arm/kernel/perf_event_v7.c | 2 +- arch/arm/kernel/perf_event_xscale.c | 2 +- arch/arm/mach-ux500/cpu-db8500.c | 2 +- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/perf/Kconfig | 15 + drivers/perf/Makefile | 1 + drivers/perf/arm_pmu.c | 921 ++++++++++++++++++++++++++++++++++++ include/linux/perf/arm_pmu.h | 154 ++++++ 15 files changed, 1105 insertions(+), 1089 deletions(-) delete mode 100644 arch/arm/include/asm/pmu.h delete mode 100644 arch/arm/kernel/perf_event.c create mode 100644 drivers/perf/Kconfig create mode 100644 drivers/perf/Makefile create mode 100644 drivers/perf/arm_pmu.c create mode 100644 include/linux/perf/arm_pmu.h (limited to 'arch/arm') diff --git a/MAINTAINERS b/MAINTAINERS index fd6078443083..485c92ced47d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -799,11 +799,13 @@ F: arch/arm/include/asm/floppy.h ARM PMU PROFILING AND DEBUGGING M: Will Deacon S: Maintained -F: arch/arm/kernel/perf_event* +F: arch/arm/kernel/perf_* F: arch/arm/oprofile/common.c -F: arch/arm/include/asm/pmu.h F: arch/arm/kernel/hw_breakpoint.c F: arch/arm/include/asm/hw_breakpoint.h +F: arch/arm/include/asm/perf_event.h +F: drivers/perf/arm_pmu.c +F: include/linux/perf/arm_pmu.h ARM PORT M: Russell King diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1c5021002fe4..4f7bc3d4b186 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1701,12 +1701,8 @@ config HIGHPTE user-space 2nd level page tables to reside in high memory. config HW_PERF_EVENTS - bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS - default y - help - Enable hardware performance counter support for perf events. If - disabled, perf events will use software events only. + def_bool y + depends on ARM_PMU config SYS_SUPPORTS_HUGETLBFS def_bool y diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h deleted file mode 100644 index 3fc87dfd77e6..000000000000 --- a/arch/arm/include/asm/pmu.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * linux/arch/arm/include/asm/pmu.h - * - * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ARM_PMU_H__ -#define __ARM_PMU_H__ - -#include -#include - -#include - -/* - * struct arm_pmu_platdata - ARM PMU platform data - * - * @handle_irq: an optional handler which will be called from the - * interrupt and passed the address of the low level handler, - * and can be used to implement any platform specific handling - * before or after calling it. - */ -struct arm_pmu_platdata { - irqreturn_t (*handle_irq)(int irq, void *dev, - irq_handler_t pmu_handler); -}; - -#ifdef CONFIG_HW_PERF_EVENTS - -/* - * The ARMv7 CPU PMU supports up to 32 event counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -#define HW_OP_UNSUPPORTED 0xFFFF -#define C(_x) PERF_COUNT_HW_CACHE_##_x -#define CACHE_OP_UNSUPPORTED 0xFFFF - -#define PERF_MAP_ALL_UNSUPPORTED \ - [0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED - -#define PERF_CACHE_MAP_ALL_UNSUPPORTED \ -[0 ... C(MAX) - 1] = { \ - [0 ... C(OP_MAX) - 1] = { \ - [0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \ - }, \ -} - -/* The events for a given PMU register set. */ -struct pmu_hw_events { - /* - * The events that are active on the PMU for the given index. - */ - struct perf_event *events[ARMPMU_MAX_HWEVENTS]; - - /* - * A 1 bit for an index indicates that the counter is being used for - * an event. A 0 means that the counter can be used. - */ - DECLARE_BITMAP(used_mask, ARMPMU_MAX_HWEVENTS); - - /* - * Hardware lock to serialize accesses to PMU registers. Needed for the - * read/modify/write sequences. - */ - raw_spinlock_t pmu_lock; - - /* - * When using percpu IRQs, we need a percpu dev_id. Place it here as we - * already have to allocate this struct per cpu. - */ - struct arm_pmu *percpu_pmu; -}; - -struct arm_pmu { - struct pmu pmu; - cpumask_t active_irqs; - cpumask_t supported_cpus; - int *irq_affinity; - char *name; - irqreturn_t (*handle_irq)(int irq_num, void *dev); - void (*enable)(struct perf_event *event); - void (*disable)(struct perf_event *event); - int (*get_event_idx)(struct pmu_hw_events *hw_events, - struct perf_event *event); - void (*clear_event_idx)(struct pmu_hw_events *hw_events, - struct perf_event *event); - int (*set_event_filter)(struct hw_perf_event *evt, - struct perf_event_attr *attr); - u32 (*read_counter)(struct perf_event *event); - void (*write_counter)(struct perf_event *event, u32 val); - void (*start)(struct arm_pmu *); - void (*stop)(struct arm_pmu *); - void (*reset)(void *); - int (*request_irq)(struct arm_pmu *, irq_handler_t handler); - void (*free_irq)(struct arm_pmu *); - int (*map_event)(struct perf_event *event); - int num_events; - atomic_t active_events; - struct mutex reserve_mutex; - u64 max_period; - struct platform_device *plat_device; - struct pmu_hw_events __percpu *hw_events; - struct notifier_block hotplug_nb; -}; - -#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) - -int armpmu_register(struct arm_pmu *armpmu, int type); - -u64 armpmu_event_update(struct perf_event *event); - -int armpmu_event_set_period(struct perf_event *event); - -int armpmu_map_event(struct perf_event *event, - const unsigned (*event_map)[PERF_COUNT_HW_MAX], - const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u32 raw_event_mask); - -struct pmu_probe_info { - unsigned int cpuid; - unsigned int mask; - int (*init)(struct arm_pmu *); -}; - -#define PMU_PROBE(_cpuid, _mask, _fn) \ -{ \ - .cpuid = (_cpuid), \ - .mask = (_mask), \ - .init = (_fn), \ -} - -#define ARM_PMU_PROBE(_cpuid, _fn) \ - PMU_PROBE(_cpuid, ARM_CPU_PART_MASK, _fn) - -#define ARM_PMU_XSCALE_MASK ((0xff << 24) | ARM_CPU_XSCALE_ARCH_MASK) - -#define XSCALE_PMU_PROBE(_version, _fn) \ - PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn) - -int arm_pmu_device_probe(struct platform_device *pdev, - const struct of_device_id *of_table, - const struct pmu_probe_info *probe_table); - -#endif /* CONFIG_HW_PERF_EVENTS */ - -#endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index e69f7a19735d..fcb25c1c5c21 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -71,8 +71,7 @@ obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o \ - perf_event_xscale.o perf_event_v6.o \ +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \ perf_event_v7.o CFLAGS_pj4-cp0.o := -marm AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c deleted file mode 100644 index 1cb40651d783..000000000000 --- a/arch/arm/kernel/perf_event.c +++ /dev/null @@ -1,921 +0,0 @@ -#undef DEBUG - -/* - * ARM performance counter support. - * - * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles - * Copyright (C) 2010 ARM Ltd., Will Deacon - * - * This code is based on the sparc64 perf event code, which is in turn based - * on the x86 code. - */ -#define pr_fmt(fmt) "hw perfevents: " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static int -armpmu_map_cache_event(const unsigned (*cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u64 config) -{ - unsigned int cache_type, cache_op, cache_result, ret; - - cache_type = (config >> 0) & 0xff; - if (cache_type >= PERF_COUNT_HW_CACHE_MAX) - return -EINVAL; - - cache_op = (config >> 8) & 0xff; - if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) - return -EINVAL; - - cache_result = (config >> 16) & 0xff; - if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) - return -EINVAL; - - ret = (int)(*cache_map)[cache_type][cache_op][cache_result]; - - if (ret == CACHE_OP_UNSUPPORTED) - return -ENOENT; - - return ret; -} - -static int -armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) -{ - int mapping; - - if (config >= PERF_COUNT_HW_MAX) - return -EINVAL; - - mapping = (*event_map)[config]; - return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; -} - -static int -armpmu_map_raw_event(u32 raw_event_mask, u64 config) -{ - return (int)(config & raw_event_mask); -} - -int -armpmu_map_event(struct perf_event *event, - const unsigned (*event_map)[PERF_COUNT_HW_MAX], - const unsigned (*cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u32 raw_event_mask) -{ - u64 config = event->attr.config; - int type = event->attr.type; - - if (type == event->pmu->type) - return armpmu_map_raw_event(raw_event_mask, config); - - switch (type) { - case PERF_TYPE_HARDWARE: - return armpmu_map_hw_event(event_map, config); - case PERF_TYPE_HW_CACHE: - return armpmu_map_cache_event(cache_map, config); - case PERF_TYPE_RAW: - return armpmu_map_raw_event(raw_event_mask, config); - } - - return -ENOENT; -} - -int armpmu_event_set_period(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - s64 left = local64_read(&hwc->period_left); - s64 period = hwc->sample_period; - int ret = 0; - - if (unlikely(left <= -period)) { - left = period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - if (unlikely(left <= 0)) { - left += period; - local64_set(&hwc->period_left, left); - hwc->last_period = period; - ret = 1; - } - - /* - * Limit the maximum period to prevent the counter value - * from overtaking the one we are about to program. In - * effect we are reducing max_period to account for - * interrupt latency (and we are being very conservative). - */ - if (left > (armpmu->max_period >> 1)) - left = armpmu->max_period >> 1; - - local64_set(&hwc->prev_count, (u64)-left); - - armpmu->write_counter(event, (u64)(-left) & 0xffffffff); - - perf_event_update_userpage(event); - - return ret; -} - -u64 armpmu_event_update(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - u64 delta, prev_raw_count, new_raw_count; - -again: - prev_raw_count = local64_read(&hwc->prev_count); - new_raw_count = armpmu->read_counter(event); - - if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, - new_raw_count) != prev_raw_count) - goto again; - - delta = (new_raw_count - prev_raw_count) & armpmu->max_period; - - local64_add(delta, &event->count); - local64_sub(delta, &hwc->period_left); - - return new_raw_count; -} - -static void -armpmu_read(struct perf_event *event) -{ - armpmu_event_update(event); -} - -static void -armpmu_stop(struct perf_event *event, int flags) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - - /* - * ARM pmu always has to update the counter, so ignore - * PERF_EF_UPDATE, see comments in armpmu_start(). - */ - if (!(hwc->state & PERF_HES_STOPPED)) { - armpmu->disable(event); - armpmu_event_update(event); - hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; - } -} - -static void armpmu_start(struct perf_event *event, int flags) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - - /* - * ARM pmu always has to reprogram the period, so ignore - * PERF_EF_RELOAD, see the comment below. - */ - if (flags & PERF_EF_RELOAD) - WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); - - hwc->state = 0; - /* - * Set the period again. Some counters can't be stopped, so when we - * were stopped we simply disabled the IRQ source and the counter - * may have been left counting. If we don't do this step then we may - * get an interrupt too soon or *way* too late if the overflow has - * happened since disabling. - */ - armpmu_event_set_period(event); - armpmu->enable(event); -} - -static void -armpmu_del(struct perf_event *event, int flags) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx = hwc->idx; - - armpmu_stop(event, PERF_EF_UPDATE); - hw_events->events[idx] = NULL; - clear_bit(idx, hw_events->used_mask); - if (armpmu->clear_event_idx) - armpmu->clear_event_idx(hw_events, event); - - perf_event_update_userpage(event); -} - -static int -armpmu_add(struct perf_event *event, int flags) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); - struct hw_perf_event *hwc = &event->hw; - int idx; - int err = 0; - - /* An event following a process won't be stopped earlier */ - if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) - return -ENOENT; - - perf_pmu_disable(event->pmu); - - /* If we don't have a space for the counter then finish early. */ - idx = armpmu->get_event_idx(hw_events, event); - if (idx < 0) { - err = idx; - goto out; - } - - /* - * If there is an event in the counter we are going to use then make - * sure it is disabled. - */ - event->hw.idx = idx; - armpmu->disable(event); - hw_events->events[idx] = event; - - hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; - if (flags & PERF_EF_START) - armpmu_start(event, PERF_EF_RELOAD); - - /* Propagate our changes to the userspace mapping. */ - perf_event_update_userpage(event); - -out: - perf_pmu_enable(event->pmu); - return err; -} - -static int -validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events, - struct perf_event *event) -{ - struct arm_pmu *armpmu; - - if (is_software_event(event)) - return 1; - - /* - * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The - * core perf code won't check that the pmu->ctx == leader->ctx - * until after pmu->event_init(event). - */ - if (event->pmu != pmu) - return 0; - - if (event->state < PERF_EVENT_STATE_OFF) - return 1; - - if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) - return 1; - - armpmu = to_arm_pmu(event->pmu); - return armpmu->get_event_idx(hw_events, event) >= 0; -} - -static int -validate_group(struct perf_event *event) -{ - struct perf_event *sibling, *leader = event->group_leader; - struct pmu_hw_events fake_pmu; - - /* - * Initialise the fake PMU. We only need to populate the - * used_mask for the purposes of validation. - */ - memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask)); - - if (!validate_event(event->pmu, &fake_pmu, leader)) - return -EINVAL; - - list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(event->pmu, &fake_pmu, sibling)) - return -EINVAL; - } - - if (!validate_event(event->pmu, &fake_pmu, event)) - return -EINVAL; - - return 0; -} - -static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) -{ - struct arm_pmu *armpmu; - struct platform_device *plat_device; - struct arm_pmu_platdata *plat; - int ret; - u64 start_clock, finish_clock; - - /* - * we request the IRQ with a (possibly percpu) struct arm_pmu**, but - * the handlers expect a struct arm_pmu*. The percpu_irq framework will - * do any necessary shifting, we just need to perform the first - * dereference. - */ - armpmu = *(void **)dev; - plat_device = armpmu->plat_device; - plat = dev_get_platdata(&plat_device->dev); - - start_clock = sched_clock(); - if (plat && plat->handle_irq) - ret = plat->handle_irq(irq, armpmu, armpmu->handle_irq); - else - ret = armpmu->handle_irq(irq, armpmu); - finish_clock = sched_clock(); - - perf_sample_event_took(finish_clock - start_clock); - return ret; -} - -static void -armpmu_release_hardware(struct arm_pmu *armpmu) -{ - armpmu->free_irq(armpmu); -} - -static int -armpmu_reserve_hardware(struct arm_pmu *armpmu) -{ - int err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); - if (err) { - armpmu_release_hardware(armpmu); - return err; - } - - return 0; -} - -static void -hw_perf_event_destroy(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - atomic_t *active_events = &armpmu->active_events; - struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex; - - if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) { - armpmu_release_hardware(armpmu); - mutex_unlock(pmu_reserve_mutex); - } -} - -static int -event_requires_mode_exclusion(struct perf_event_attr *attr) -{ - return attr->exclude_idle || attr->exclude_user || - attr->exclude_kernel || attr->exclude_hv; -} - -static int -__hw_perf_event_init(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - struct hw_perf_event *hwc = &event->hw; - int mapping; - - mapping = armpmu->map_event(event); - - if (mapping < 0) { - pr_debug("event %x:%llx not supported\n", event->attr.type, - event->attr.config); - return mapping; - } - - /* - * We don't assign an index until we actually place the event onto - * hardware. Use -1 to signify that we haven't decided where to put it - * yet. For SMP systems, each core has it's own PMU so we can't do any - * clever allocation or constraints checking at this point. - */ - hwc->idx = -1; - hwc->config_base = 0; - hwc->config = 0; - hwc->event_base = 0; - - /* - * Check whether we need to exclude the counter from certain modes. - */ - if ((!armpmu->set_event_filter || - armpmu->set_event_filter(hwc, &event->attr)) && - event_requires_mode_exclusion(&event->attr)) { - pr_debug("ARM performance counters do not support " - "mode exclusion\n"); - return -EOPNOTSUPP; - } - - /* - * Store the event encoding into the config_base field. - */ - hwc->config_base |= (unsigned long)mapping; - - if (!is_sampling_event(event)) { - /* - * For non-sampling runs, limit the sample_period to half - * of the counter width. That way, the new counter value - * is far less likely to overtake the previous one unless - * you have some serious IRQ latency issues. - */ - hwc->sample_period = armpmu->max_period >> 1; - hwc->last_period = hwc->sample_period; - local64_set(&hwc->period_left, hwc->sample_period); - } - - if (event->group_leader != event) { - if (validate_group(event) != 0) - return -EINVAL; - } - - return 0; -} - -static int armpmu_event_init(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - int err = 0; - atomic_t *active_events = &armpmu->active_events; - - /* - * Reject CPU-affine events for CPUs that are of a different class to - * that which this PMU handles. Process-following events (where - * event->cpu == -1) can be migrated between CPUs, and thus we have to - * reject them later (in armpmu_add) if they're scheduled on a - * different class of CPU. - */ - if (event->cpu != -1 && - !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus)) - return -ENOENT; - - /* does not support taken branch sampling */ - if (has_branch_stack(event)) - return -EOPNOTSUPP; - - if (armpmu->map_event(event) == -ENOENT) - return -ENOENT; - - event->destroy = hw_perf_event_destroy; - - if (!atomic_inc_not_zero(active_events)) { - mutex_lock(&armpmu->reserve_mutex); - if (atomic_read(active_events) == 0) - err = armpmu_reserve_hardware(armpmu); - - if (!err) - atomic_inc(active_events); - mutex_unlock(&armpmu->reserve_mutex); - } - - if (err) - return err; - - err = __hw_perf_event_init(event); - if (err) - hw_perf_event_destroy(event); - - return err; -} - -static void armpmu_enable(struct pmu *pmu) -{ - struct arm_pmu *armpmu = to_arm_pmu(pmu); - struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); - int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); - - /* For task-bound events we may be called on other CPUs */ - if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) - return; - - if (enabled) - armpmu->start(armpmu); -} - -static void armpmu_disable(struct pmu *pmu) -{ - struct arm_pmu *armpmu = to_arm_pmu(pmu); - - /* For task-bound events we may be called on other CPUs */ - if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) - return; - - armpmu->stop(armpmu); -} - -/* - * In heterogeneous systems, events are specific to a particular - * microarchitecture, and aren't suitable for another. Thus, only match CPUs of - * the same microarchitecture. - */ -static int armpmu_filter_match(struct perf_event *event) -{ - struct arm_pmu *armpmu = to_arm_pmu(event->pmu); - unsigned int cpu = smp_processor_id(); - return cpumask_test_cpu(cpu, &armpmu->supported_cpus); -} - -static void armpmu_init(struct arm_pmu *armpmu) -{ - atomic_set(&armpmu->active_events, 0); - mutex_init(&armpmu->reserve_mutex); - - armpmu->pmu = (struct pmu) { - .pmu_enable = armpmu_enable, - .pmu_disable = armpmu_disable, - .event_init = armpmu_event_init, - .add = armpmu_add, - .del = armpmu_del, - .start = armpmu_start, - .stop = armpmu_stop, - .read = armpmu_read, - .filter_match = armpmu_filter_match, - }; -} - -int armpmu_register(struct arm_pmu *armpmu, int type) -{ - armpmu_init(armpmu); - pr_info("enabled with %s PMU driver, %d counters available\n", - armpmu->name, armpmu->num_events); - return perf_pmu_register(&armpmu->pmu, armpmu->name, type); -} - -/* Set at runtime when we know what CPU type we are. */ -static struct arm_pmu *__oprofile_cpu_pmu; - -/* - * Despite the names, these two functions are CPU-specific and are used - * by the OProfile/perf code. - */ -const char *perf_pmu_name(void) -{ - if (!__oprofile_cpu_pmu) - return NULL; - - return __oprofile_cpu_pmu->name; -} -EXPORT_SYMBOL_GPL(perf_pmu_name); - -int perf_num_counters(void) -{ - int max_events = 0; - - if (__oprofile_cpu_pmu != NULL) - max_events = __oprofile_cpu_pmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -static void cpu_pmu_enable_percpu_irq(void *data) -{ - int irq = *(int *)data; - - enable_percpu_irq(irq, IRQ_TYPE_NONE); -} - -static void cpu_pmu_disable_percpu_irq(void *data) -{ - int irq = *(int *)data; - - disable_percpu_irq(irq); -} - -static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) -{ - int i, irq, irqs; - struct platform_device *pmu_device = cpu_pmu->plat_device; - struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - - irq = platform_get_irq(pmu_device, 0); - if (irq >= 0 && irq_is_percpu(irq)) { - on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); - free_percpu_irq(irq, &hw_events->percpu_pmu); - } else { - for (i = 0; i < irqs; ++i) { - int cpu = i; - - if (cpu_pmu->irq_affinity) - cpu = cpu_pmu->irq_affinity[i]; - - if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) - continue; - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); - } - } -} - -static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) -{ - int i, err, irq, irqs; - struct platform_device *pmu_device = cpu_pmu->plat_device; - struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; - - if (!pmu_device) - return -ENODEV; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - if (irqs < 1) { - pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n"); - return 0; - } - - irq = platform_get_irq(pmu_device, 0); - if (irq >= 0 && irq_is_percpu(irq)) { - err = request_percpu_irq(irq, handler, "arm-pmu", - &hw_events->percpu_pmu); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - return err; - } - on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); - } else { - for (i = 0; i < irqs; ++i) { - int cpu = i; - - err = 0; - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - if (cpu_pmu->irq_affinity) - cpu = cpu_pmu->irq_affinity[i]; - - /* - * If we have a single PMU interrupt that we can't shift, - * assume that we're running on a uniprocessor machine and - * continue. Otherwise, continue without this interrupt. - */ - if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { - pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, cpu); - continue; - } - - err = request_irq(irq, handler, - IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", - per_cpu_ptr(&hw_events->percpu_pmu, cpu)); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - return err; - } - - cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); - } - } - - return 0; -} - -/* - * PMU hardware loses all context when a CPU goes offline. - * When a CPU is hotplugged back in, since some hardware registers are - * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading - * junk values out of them. - */ -static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, - void *hcpu) -{ - int cpu = (unsigned long)hcpu; - struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb); - - if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) - return NOTIFY_DONE; - - if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) - return NOTIFY_DONE; - - if (pmu->reset) - pmu->reset(pmu); - else - return NOTIFY_DONE; - - return NOTIFY_OK; -} - -static int cpu_pmu_init(struct arm_pmu *cpu_pmu) -{ - int err; - int cpu; - struct pmu_hw_events __percpu *cpu_hw_events; - - cpu_hw_events = alloc_percpu(struct pmu_hw_events); - if (!cpu_hw_events) - return -ENOMEM; - - cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify; - err = register_cpu_notifier(&cpu_pmu->hotplug_nb); - if (err) - goto out_hw_events; - - for_each_possible_cpu(cpu) { - struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu); - raw_spin_lock_init(&events->pmu_lock); - events->percpu_pmu = cpu_pmu; - } - - cpu_pmu->hw_events = cpu_hw_events; - cpu_pmu->request_irq = cpu_pmu_request_irq; - cpu_pmu->free_irq = cpu_pmu_free_irq; - - /* Ensure the PMU has sane values out of reset. */ - if (cpu_pmu->reset) - on_each_cpu_mask(&cpu_pmu->supported_cpus, cpu_pmu->reset, - cpu_pmu, 1); - - /* If no interrupts available, set the corresponding capability flag */ - if (!platform_get_irq(cpu_pmu->plat_device, 0)) - cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; - - return 0; - -out_hw_events: - free_percpu(cpu_hw_events); - return err; -} - -static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) -{ - unregister_cpu_notifier(&cpu_pmu->hotplug_nb); - free_percpu(cpu_pmu->hw_events); -} - -/* - * CPU PMU identification and probing. - */ -static int probe_current_pmu(struct arm_pmu *pmu, - const struct pmu_probe_info *info) -{ - int cpu = get_cpu(); - unsigned int cpuid = read_cpuid_id(); - int ret = -ENODEV; - - pr_info("probing PMU on CPU %d\n", cpu); - - for (; info->init != NULL; info++) { - if ((cpuid & info->mask) != info->cpuid) - continue; - ret = info->init(pmu); - break; - } - - put_cpu(); - return ret; -} - -static int of_pmu_irq_cfg(struct arm_pmu *pmu) -{ - int *irqs, i = 0; - bool using_spi = false; - struct platform_device *pdev = pmu->plat_device; - - irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); - if (!irqs) - return -ENOMEM; - - do { - struct device_node *dn; - int cpu, irq; - - /* See if we have an affinity entry */ - dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", i); - if (!dn) - break; - - /* Check the IRQ type and prohibit a mix of PPIs and SPIs */ - irq = platform_get_irq(pdev, i); - if (irq >= 0) { - bool spi = !irq_is_percpu(irq); - - if (i > 0 && spi != using_spi) { - pr_err("PPI/SPI IRQ type mismatch for %s!\n", - dn->name); - kfree(irqs); - return -EINVAL; - } - - using_spi = spi; - } - - /* Now look up the logical CPU number */ - for_each_possible_cpu(cpu) - if (dn == of_cpu_device_node_get(cpu)) - break; - - if (cpu >= nr_cpu_ids) { - pr_warn("Failed to find logical CPU for %s\n", - dn->name); - of_node_put(dn); - cpumask_setall(&pmu->supported_cpus); - break; - } - of_node_put(dn); - - /* For SPIs, we need to track the affinity per IRQ */ - if (using_spi) { - if (i >= pdev->num_resources) { - of_node_put(dn); - break; - } - - irqs[i] = cpu; - } - - /* Keep track of the CPUs containing this PMU type */ - cpumask_set_cpu(cpu, &pmu->supported_cpus); - of_node_put(dn); - i++; - } while (1); - - /* If we didn't manage to parse anything, claim to support all CPUs */ - if (cpumask_weight(&pmu->supported_cpus) == 0) - cpumask_setall(&pmu->supported_cpus); - - /* If we matched up the IRQ affinities, use them to route the SPIs */ - if (using_spi && i == pdev->num_resources) - pmu->irq_affinity = irqs; - else - kfree(irqs); - - return 0; -} - -int arm_pmu_device_probe(struct platform_device *pdev, - const struct of_device_id *of_table, - const struct pmu_probe_info *probe_table) -{ - const struct of_device_id *of_id; - const int (*init_fn)(struct arm_pmu *); - struct device_node *node = pdev->dev.of_node; - struct arm_pmu *pmu; - int ret = -ENODEV; - - pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); - if (!pmu) { - pr_info("failed to allocate PMU device!\n"); - return -ENOMEM; - } - - if (!__oprofile_cpu_pmu) - __oprofile_cpu_pmu = pmu; - - pmu->plat_device = pdev; - - if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) { - init_fn = of_id->data; - - ret = of_pmu_irq_cfg(pmu); - if (!ret) - ret = init_fn(pmu); - } else { - ret = probe_current_pmu(pmu, probe_table); - cpumask_setall(&pmu->supported_cpus); - } - - if (ret) { - pr_info("failed to probe PMU!\n"); - goto out_free; - } - - ret = cpu_pmu_init(pmu); - if (ret) - goto out_free; - - ret = armpmu_register(pmu, -1); - if (ret) - goto out_destroy; - - return 0; - -out_destroy: - cpu_pmu_destroy(pmu); -out_free: - pr_info("failed to register PMU devices!\n"); - kfree(pmu); - return ret; -} diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 09f83e414a72..09413e7b49aa 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -34,9 +34,9 @@ #include #include -#include #include +#include #include enum armv6_perf_types { diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f9b37f876e20..126dc679b230 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -21,11 +21,11 @@ #include #include #include -#include #include #include "../vfp/vfpinstr.h" #include +#include #include /* diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 304d056d5b25..aa0499e2eef7 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -16,9 +16,9 @@ #include #include -#include #include +#include #include enum xscale_perf_types { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 16913800bbf9..5578dc1ab52b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -20,10 +20,10 @@ #include #include #include +#include #include #include -#include #include #include "setup.h" diff --git a/drivers/Kconfig b/drivers/Kconfig index 6e973b8e3a3b..3497485f5eab 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -176,6 +176,8 @@ source "drivers/powercap/Kconfig" source "drivers/mcb/Kconfig" +source "drivers/perf/Kconfig" + source "drivers/ras/Kconfig" source "drivers/thunderbolt/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index b64b49f6e01b..f245f2291b8a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -161,6 +161,7 @@ obj-$(CONFIG_NTB) += ntb/ obj-$(CONFIG_FMC) += fmc/ obj-$(CONFIG_POWERCAP) += powercap/ obj-$(CONFIG_MCB) += mcb/ +obj-$(CONFIG_PERF_EVENTS) += perf/ obj-$(CONFIG_RAS) += ras/ obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig new file mode 100644 index 000000000000..d9de36ee165d --- /dev/null +++ b/drivers/perf/Kconfig @@ -0,0 +1,15 @@ +# +# Performance Monitor Drivers +# + +menu "Performance monitor support" + +config ARM_PMU + depends on PERF_EVENTS && ARM + bool "ARM PMU framework" + default y + help + Say y if you want to use CPU performance monitors on ARM-based + systems. + +endmenu diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile new file mode 100644 index 000000000000..acd2397ded94 --- /dev/null +++ b/drivers/perf/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARM_PMU) += arm_pmu.o diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c new file mode 100644 index 000000000000..2365a32a595e --- /dev/null +++ b/drivers/perf/arm_pmu.c @@ -0,0 +1,921 @@ +#undef DEBUG + +/* + * ARM performance counter support. + * + * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles + * Copyright (C) 2010 ARM Ltd., Will Deacon + * + * This code is based on the sparc64 perf event code, which is in turn based + * on the x86 code. + */ +#define pr_fmt(fmt) "hw perfevents: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static int +armpmu_map_cache_event(const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u64 config) +{ + unsigned int cache_type, cache_op, cache_result, ret; + + cache_type = (config >> 0) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return -EINVAL; + + cache_op = (config >> 8) & 0xff; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return -EINVAL; + + cache_result = (config >> 16) & 0xff; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ret = (int)(*cache_map)[cache_type][cache_op][cache_result]; + + if (ret == CACHE_OP_UNSUPPORTED) + return -ENOENT; + + return ret; +} + +static int +armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) +{ + int mapping; + + if (config >= PERF_COUNT_HW_MAX) + return -EINVAL; + + mapping = (*event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; +} + +static int +armpmu_map_raw_event(u32 raw_event_mask, u64 config) +{ + return (int)(config & raw_event_mask); +} + +int +armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) +{ + u64 config = event->attr.config; + int type = event->attr.type; + + if (type == event->pmu->type) + return armpmu_map_raw_event(raw_event_mask, config); + + switch (type) { + case PERF_TYPE_HARDWARE: + return armpmu_map_hw_event(event_map, config); + case PERF_TYPE_HW_CACHE: + return armpmu_map_cache_event(cache_map, config); + case PERF_TYPE_RAW: + return armpmu_map_raw_event(raw_event_mask, config); + } + + return -ENOENT; +} + +int armpmu_event_set_period(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + s64 left = local64_read(&hwc->period_left); + s64 period = hwc->sample_period; + int ret = 0; + + if (unlikely(left <= -period)) { + left = period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + if (unlikely(left <= 0)) { + left += period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + /* + * Limit the maximum period to prevent the counter value + * from overtaking the one we are about to program. In + * effect we are reducing max_period to account for + * interrupt latency (and we are being very conservative). + */ + if (left > (armpmu->max_period >> 1)) + left = armpmu->max_period >> 1; + + local64_set(&hwc->prev_count, (u64)-left); + + armpmu->write_counter(event, (u64)(-left) & 0xffffffff); + + perf_event_update_userpage(event); + + return ret; +} + +u64 armpmu_event_update(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + u64 delta, prev_raw_count, new_raw_count; + +again: + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = armpmu->read_counter(event); + + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = (new_raw_count - prev_raw_count) & armpmu->max_period; + + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); + + return new_raw_count; +} + +static void +armpmu_read(struct perf_event *event) +{ + armpmu_event_update(event); +} + +static void +armpmu_stop(struct perf_event *event, int flags) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + /* + * ARM pmu always has to update the counter, so ignore + * PERF_EF_UPDATE, see comments in armpmu_start(). + */ + if (!(hwc->state & PERF_HES_STOPPED)) { + armpmu->disable(event); + armpmu_event_update(event); + hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; + } +} + +static void armpmu_start(struct perf_event *event, int flags) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + + /* + * ARM pmu always has to reprogram the period, so ignore + * PERF_EF_RELOAD, see the comment below. + */ + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); + + hwc->state = 0; + /* + * Set the period again. Some counters can't be stopped, so when we + * were stopped we simply disabled the IRQ source and the counter + * may have been left counting. If we don't do this step then we may + * get an interrupt too soon or *way* too late if the overflow has + * happened since disabling. + */ + armpmu_event_set_period(event); + armpmu->enable(event); +} + +static void +armpmu_del(struct perf_event *event, int flags) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + armpmu_stop(event, PERF_EF_UPDATE); + hw_events->events[idx] = NULL; + clear_bit(idx, hw_events->used_mask); + if (armpmu->clear_event_idx) + armpmu->clear_event_idx(hw_events, event); + + perf_event_update_userpage(event); +} + +static int +armpmu_add(struct perf_event *event, int flags) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx; + int err = 0; + + /* An event following a process won't be stopped earlier */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return -ENOENT; + + perf_pmu_disable(event->pmu); + + /* If we don't have a space for the counter then finish early. */ + idx = armpmu->get_event_idx(hw_events, event); + if (idx < 0) { + err = idx; + goto out; + } + + /* + * If there is an event in the counter we are going to use then make + * sure it is disabled. + */ + event->hw.idx = idx; + armpmu->disable(event); + hw_events->events[idx] = event; + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + if (flags & PERF_EF_START) + armpmu_start(event, PERF_EF_RELOAD); + + /* Propagate our changes to the userspace mapping. */ + perf_event_update_userpage(event); + +out: + perf_pmu_enable(event->pmu); + return err; +} + +static int +validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events, + struct perf_event *event) +{ + struct arm_pmu *armpmu; + + if (is_software_event(event)) + return 1; + + /* + * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The + * core perf code won't check that the pmu->ctx == leader->ctx + * until after pmu->event_init(event). + */ + if (event->pmu != pmu) + return 0; + + if (event->state < PERF_EVENT_STATE_OFF) + return 1; + + if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) + return 1; + + armpmu = to_arm_pmu(event->pmu); + return armpmu->get_event_idx(hw_events, event) >= 0; +} + +static int +validate_group(struct perf_event *event) +{ + struct perf_event *sibling, *leader = event->group_leader; + struct pmu_hw_events fake_pmu; + + /* + * Initialise the fake PMU. We only need to populate the + * used_mask for the purposes of validation. + */ + memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask)); + + if (!validate_event(event->pmu, &fake_pmu, leader)) + return -EINVAL; + + list_for_each_entry(sibling, &leader->sibling_list, group_entry) { + if (!validate_event(event->pmu, &fake_pmu, sibling)) + return -EINVAL; + } + + if (!validate_event(event->pmu, &fake_pmu, event)) + return -EINVAL; + + return 0; +} + +static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) +{ + struct arm_pmu *armpmu; + struct platform_device *plat_device; + struct arm_pmu_platdata *plat; + int ret; + u64 start_clock, finish_clock; + + /* + * we request the IRQ with a (possibly percpu) struct arm_pmu**, but + * the handlers expect a struct arm_pmu*. The percpu_irq framework will + * do any necessary shifting, we just need to perform the first + * dereference. + */ + armpmu = *(void **)dev; + plat_device = armpmu->plat_device; + plat = dev_get_platdata(&plat_device->dev); + + start_clock = sched_clock(); + if (plat && plat->handle_irq) + ret = plat->handle_irq(irq, armpmu, armpmu->handle_irq); + else + ret = armpmu->handle_irq(irq, armpmu); + finish_clock = sched_clock(); + + perf_sample_event_took(finish_clock - start_clock); + return ret; +} + +static void +armpmu_release_hardware(struct arm_pmu *armpmu) +{ + armpmu->free_irq(armpmu); +} + +static int +armpmu_reserve_hardware(struct arm_pmu *armpmu) +{ + int err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); + if (err) { + armpmu_release_hardware(armpmu); + return err; + } + + return 0; +} + +static void +hw_perf_event_destroy(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + atomic_t *active_events = &armpmu->active_events; + struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex; + + if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) { + armpmu_release_hardware(armpmu); + mutex_unlock(pmu_reserve_mutex); + } +} + +static int +event_requires_mode_exclusion(struct perf_event_attr *attr) +{ + return attr->exclude_idle || attr->exclude_user || + attr->exclude_kernel || attr->exclude_hv; +} + +static int +__hw_perf_event_init(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hwc = &event->hw; + int mapping; + + mapping = armpmu->map_event(event); + + if (mapping < 0) { + pr_debug("event %x:%llx not supported\n", event->attr.type, + event->attr.config); + return mapping; + } + + /* + * We don't assign an index until we actually place the event onto + * hardware. Use -1 to signify that we haven't decided where to put it + * yet. For SMP systems, each core has it's own PMU so we can't do any + * clever allocation or constraints checking at this point. + */ + hwc->idx = -1; + hwc->config_base = 0; + hwc->config = 0; + hwc->event_base = 0; + + /* + * Check whether we need to exclude the counter from certain modes. + */ + if ((!armpmu->set_event_filter || + armpmu->set_event_filter(hwc, &event->attr)) && + event_requires_mode_exclusion(&event->attr)) { + pr_debug("ARM performance counters do not support " + "mode exclusion\n"); + return -EOPNOTSUPP; + } + + /* + * Store the event encoding into the config_base field. + */ + hwc->config_base |= (unsigned long)mapping; + + if (!is_sampling_event(event)) { + /* + * For non-sampling runs, limit the sample_period to half + * of the counter width. That way, the new counter value + * is far less likely to overtake the previous one unless + * you have some serious IRQ latency issues. + */ + hwc->sample_period = armpmu->max_period >> 1; + hwc->last_period = hwc->sample_period; + local64_set(&hwc->period_left, hwc->sample_period); + } + + if (event->group_leader != event) { + if (validate_group(event) != 0) + return -EINVAL; + } + + return 0; +} + +static int armpmu_event_init(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + int err = 0; + atomic_t *active_events = &armpmu->active_events; + + /* + * Reject CPU-affine events for CPUs that are of a different class to + * that which this PMU handles. Process-following events (where + * event->cpu == -1) can be migrated between CPUs, and thus we have to + * reject them later (in armpmu_add) if they're scheduled on a + * different class of CPU. + */ + if (event->cpu != -1 && + !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus)) + return -ENOENT; + + /* does not support taken branch sampling */ + if (has_branch_stack(event)) + return -EOPNOTSUPP; + + if (armpmu->map_event(event) == -ENOENT) + return -ENOENT; + + event->destroy = hw_perf_event_destroy; + + if (!atomic_inc_not_zero(active_events)) { + mutex_lock(&armpmu->reserve_mutex); + if (atomic_read(active_events) == 0) + err = armpmu_reserve_hardware(armpmu); + + if (!err) + atomic_inc(active_events); + mutex_unlock(&armpmu->reserve_mutex); + } + + if (err) + return err; + + err = __hw_perf_event_init(event); + if (err) + hw_perf_event_destroy(event); + + return err; +} + +static void armpmu_enable(struct pmu *pmu) +{ + struct arm_pmu *armpmu = to_arm_pmu(pmu); + struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); + int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); + + /* For task-bound events we may be called on other CPUs */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return; + + if (enabled) + armpmu->start(armpmu); +} + +static void armpmu_disable(struct pmu *pmu) +{ + struct arm_pmu *armpmu = to_arm_pmu(pmu); + + /* For task-bound events we may be called on other CPUs */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return; + + armpmu->stop(armpmu); +} + +/* + * In heterogeneous systems, events are specific to a particular + * microarchitecture, and aren't suitable for another. Thus, only match CPUs of + * the same microarchitecture. + */ +static int armpmu_filter_match(struct perf_event *event) +{ + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + unsigned int cpu = smp_processor_id(); + return cpumask_test_cpu(cpu, &armpmu->supported_cpus); +} + +static void armpmu_init(struct arm_pmu *armpmu) +{ + atomic_set(&armpmu->active_events, 0); + mutex_init(&armpmu->reserve_mutex); + + armpmu->pmu = (struct pmu) { + .pmu_enable = armpmu_enable, + .pmu_disable = armpmu_disable, + .event_init = armpmu_event_init, + .add = armpmu_add, + .del = armpmu_del, + .start = armpmu_start, + .stop = armpmu_stop, + .read = armpmu_read, + .filter_match = armpmu_filter_match, + }; +} + +int armpmu_register(struct arm_pmu *armpmu, int type) +{ + armpmu_init(armpmu); + pr_info("enabled with %s PMU driver, %d counters available\n", + armpmu->name, armpmu->num_events); + return perf_pmu_register(&armpmu->pmu, armpmu->name, type); +} + +/* Set at runtime when we know what CPU type we are. */ +static struct arm_pmu *__oprofile_cpu_pmu; + +/* + * Despite the names, these two functions are CPU-specific and are used + * by the OProfile/perf code. + */ +const char *perf_pmu_name(void) +{ + if (!__oprofile_cpu_pmu) + return NULL; + + return __oprofile_cpu_pmu->name; +} +EXPORT_SYMBOL_GPL(perf_pmu_name); + +int perf_num_counters(void) +{ + int max_events = 0; + + if (__oprofile_cpu_pmu != NULL) + max_events = __oprofile_cpu_pmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +static void cpu_pmu_enable_percpu_irq(void *data) +{ + int irq = *(int *)data; + + enable_percpu_irq(irq, IRQ_TYPE_NONE); +} + +static void cpu_pmu_disable_percpu_irq(void *data) +{ + int irq = *(int *)data; + + disable_percpu_irq(irq); +} + +static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) +{ + int i, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + irq = platform_get_irq(pmu_device, 0); + if (irq >= 0 && irq_is_percpu(irq)) { + on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); + free_percpu_irq(irq, &hw_events->percpu_pmu); + } else { + for (i = 0; i < irqs; ++i) { + int cpu = i; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); + } + } +} + +static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) +{ + int i, err, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; + + if (!pmu_device) + return -ENODEV; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { + pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n"); + return 0; + } + + irq = platform_get_irq(pmu_device, 0); + if (irq >= 0 && irq_is_percpu(irq)) { + err = request_percpu_irq(irq, handler, "arm-pmu", + &hw_events->percpu_pmu); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); + } else { + for (i = 0; i < irqs; ++i) { + int cpu = i; + + err = 0; + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { + pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, cpu); + continue; + } + + err = request_irq(irq, handler, + IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", + per_cpu_ptr(&hw_events->percpu_pmu, cpu)); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + + cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); + } + } + + return 0; +} + +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, + void *hcpu) +{ + int cpu = (unsigned long)hcpu; + struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb); + + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) + return NOTIFY_DONE; + + if (pmu->reset) + pmu->reset(pmu); + else + return NOTIFY_DONE; + + return NOTIFY_OK; +} + +static int cpu_pmu_init(struct arm_pmu *cpu_pmu) +{ + int err; + int cpu; + struct pmu_hw_events __percpu *cpu_hw_events; + + cpu_hw_events = alloc_percpu(struct pmu_hw_events); + if (!cpu_hw_events) + return -ENOMEM; + + cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify; + err = register_cpu_notifier(&cpu_pmu->hotplug_nb); + if (err) + goto out_hw_events; + + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu); + raw_spin_lock_init(&events->pmu_lock); + events->percpu_pmu = cpu_pmu; + } + + cpu_pmu->hw_events = cpu_hw_events; + cpu_pmu->request_irq = cpu_pmu_request_irq; + cpu_pmu->free_irq = cpu_pmu_free_irq; + + /* Ensure the PMU has sane values out of reset. */ + if (cpu_pmu->reset) + on_each_cpu_mask(&cpu_pmu->supported_cpus, cpu_pmu->reset, + cpu_pmu, 1); + + /* If no interrupts available, set the corresponding capability flag */ + if (!platform_get_irq(cpu_pmu->plat_device, 0)) + cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; + + return 0; + +out_hw_events: + free_percpu(cpu_hw_events); + return err; +} + +static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) +{ + unregister_cpu_notifier(&cpu_pmu->hotplug_nb); + free_percpu(cpu_pmu->hw_events); +} + +/* + * CPU PMU identification and probing. + */ +static int probe_current_pmu(struct arm_pmu *pmu, + const struct pmu_probe_info *info) +{ + int cpu = get_cpu(); + unsigned int cpuid = read_cpuid_id(); + int ret = -ENODEV; + + pr_info("probing PMU on CPU %d\n", cpu); + + for (; info->init != NULL; info++) { + if ((cpuid & info->mask) != info->cpuid) + continue; + ret = info->init(pmu); + break; + } + + put_cpu(); + return ret; +} + +static int of_pmu_irq_cfg(struct arm_pmu *pmu) +{ + int *irqs, i = 0; + bool using_spi = false; + struct platform_device *pdev = pmu->plat_device; + + irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + if (!irqs) + return -ENOMEM; + + do { + struct device_node *dn; + int cpu, irq; + + /* See if we have an affinity entry */ + dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", i); + if (!dn) + break; + + /* Check the IRQ type and prohibit a mix of PPIs and SPIs */ + irq = platform_get_irq(pdev, i); + if (irq >= 0) { + bool spi = !irq_is_percpu(irq); + + if (i > 0 && spi != using_spi) { + pr_err("PPI/SPI IRQ type mismatch for %s!\n", + dn->name); + kfree(irqs); + return -EINVAL; + } + + using_spi = spi; + } + + /* Now look up the logical CPU number */ + for_each_possible_cpu(cpu) + if (dn == of_cpu_device_node_get(cpu)) + break; + + if (cpu >= nr_cpu_ids) { + pr_warn("Failed to find logical CPU for %s\n", + dn->name); + of_node_put(dn); + cpumask_setall(&pmu->supported_cpus); + break; + } + of_node_put(dn); + + /* For SPIs, we need to track the affinity per IRQ */ + if (using_spi) { + if (i >= pdev->num_resources) { + of_node_put(dn); + break; + } + + irqs[i] = cpu; + } + + /* Keep track of the CPUs containing this PMU type */ + cpumask_set_cpu(cpu, &pmu->supported_cpus); + of_node_put(dn); + i++; + } while (1); + + /* If we didn't manage to parse anything, claim to support all CPUs */ + if (cpumask_weight(&pmu->supported_cpus) == 0) + cpumask_setall(&pmu->supported_cpus); + + /* If we matched up the IRQ affinities, use them to route the SPIs */ + if (using_spi && i == pdev->num_resources) + pmu->irq_affinity = irqs; + else + kfree(irqs); + + return 0; +} + +int arm_pmu_device_probe(struct platform_device *pdev, + const struct of_device_id *of_table, + const struct pmu_probe_info *probe_table) +{ + const struct of_device_id *of_id; + const int (*init_fn)(struct arm_pmu *); + struct device_node *node = pdev->dev.of_node; + struct arm_pmu *pmu; + int ret = -ENODEV; + + pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); + if (!pmu) { + pr_info("failed to allocate PMU device!\n"); + return -ENOMEM; + } + + if (!__oprofile_cpu_pmu) + __oprofile_cpu_pmu = pmu; + + pmu->plat_device = pdev; + + if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) { + init_fn = of_id->data; + + ret = of_pmu_irq_cfg(pmu); + if (!ret) + ret = init_fn(pmu); + } else { + ret = probe_current_pmu(pmu, probe_table); + cpumask_setall(&pmu->supported_cpus); + } + + if (ret) { + pr_info("failed to probe PMU!\n"); + goto out_free; + } + + ret = cpu_pmu_init(pmu); + if (ret) + goto out_free; + + ret = armpmu_register(pmu, -1); + if (ret) + goto out_destroy; + + return 0; + +out_destroy: + cpu_pmu_destroy(pmu); +out_free: + pr_info("failed to register PMU devices!\n"); + kfree(pmu); + return ret; +} diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h new file mode 100644 index 000000000000..bfa673bb822d --- /dev/null +++ b/include/linux/perf/arm_pmu.h @@ -0,0 +1,154 @@ +/* + * linux/arch/arm/include/asm/pmu.h + * + * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ARM_PMU_H__ +#define __ARM_PMU_H__ + +#include +#include + +#include + +/* + * struct arm_pmu_platdata - ARM PMU platform data + * + * @handle_irq: an optional handler which will be called from the + * interrupt and passed the address of the low level handler, + * and can be used to implement any platform specific handling + * before or after calling it. + */ +struct arm_pmu_platdata { + irqreturn_t (*handle_irq)(int irq, void *dev, + irq_handler_t pmu_handler); +}; + +#ifdef CONFIG_ARM_PMU + +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF + +#define PERF_MAP_ALL_UNSUPPORTED \ + [0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED + +#define PERF_CACHE_MAP_ALL_UNSUPPORTED \ +[0 ... C(MAX) - 1] = { \ + [0 ... C(OP_MAX) - 1] = { \ + [0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \ + }, \ +} + +/* The events for a given PMU register set. */ +struct pmu_hw_events { + /* + * The events that are active on the PMU for the given index. + */ + struct perf_event *events[ARMPMU_MAX_HWEVENTS]; + + /* + * A 1 bit for an index indicates that the counter is being used for + * an event. A 0 means that the counter can be used. + */ + DECLARE_BITMAP(used_mask, ARMPMU_MAX_HWEVENTS); + + /* + * Hardware lock to serialize accesses to PMU registers. Needed for the + * read/modify/write sequences. + */ + raw_spinlock_t pmu_lock; + + /* + * When using percpu IRQs, we need a percpu dev_id. Place it here as we + * already have to allocate this struct per cpu. + */ + struct arm_pmu *percpu_pmu; +}; + +struct arm_pmu { + struct pmu pmu; + cpumask_t active_irqs; + cpumask_t supported_cpus; + int *irq_affinity; + char *name; + irqreturn_t (*handle_irq)(int irq_num, void *dev); + void (*enable)(struct perf_event *event); + void (*disable)(struct perf_event *event); + int (*get_event_idx)(struct pmu_hw_events *hw_events, + struct perf_event *event); + void (*clear_event_idx)(struct pmu_hw_events *hw_events, + struct perf_event *event); + int (*set_event_filter)(struct hw_perf_event *evt, + struct perf_event_attr *attr); + u32 (*read_counter)(struct perf_event *event); + void (*write_counter)(struct perf_event *event, u32 val); + void (*start)(struct arm_pmu *); + void (*stop)(struct arm_pmu *); + void (*reset)(void *); + int (*request_irq)(struct arm_pmu *, irq_handler_t handler); + void (*free_irq)(struct arm_pmu *); + int (*map_event)(struct perf_event *event); + int num_events; + atomic_t active_events; + struct mutex reserve_mutex; + u64 max_period; + struct platform_device *plat_device; + struct pmu_hw_events __percpu *hw_events; + struct notifier_block hotplug_nb; +}; + +#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) + +int armpmu_register(struct arm_pmu *armpmu, int type); + +u64 armpmu_event_update(struct perf_event *event); + +int armpmu_event_set_period(struct perf_event *event); + +int armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask); + +struct pmu_probe_info { + unsigned int cpuid; + unsigned int mask; + int (*init)(struct arm_pmu *); +}; + +#define PMU_PROBE(_cpuid, _mask, _fn) \ +{ \ + .cpuid = (_cpuid), \ + .mask = (_mask), \ + .init = (_fn), \ +} + +#define ARM_PMU_PROBE(_cpuid, _fn) \ + PMU_PROBE(_cpuid, ARM_CPU_PART_MASK, _fn) + +#define ARM_PMU_XSCALE_MASK ((0xff << 24) | ARM_CPU_XSCALE_ARCH_MASK) + +#define XSCALE_PMU_PROBE(_version, _fn) \ + PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn) + +int arm_pmu_device_probe(struct platform_device *pdev, + const struct of_device_id *of_table, + const struct pmu_probe_info *probe_table); + +#endif /* CONFIG_ARM_PMU */ + +#endif /* __ARM_PMU_H__ */ -- cgit v1.2.3 From 37cf524f9360f9165d67459b7bf795c01824df98 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 31 Jul 2015 15:46:18 +0100 Subject: ARM: psci: boot_secondary: replace __pa with virt_to_idmap On some PAE systems (e.g. TI Keystone), memory is above the 32-bit addressable limit, and the interconnect provides an aliased view of parts of physical memory in the 32-bit addressable space. This alias is strictly for boot time usage, and is not otherwise usable because of coherency limitations. In this case, virt_to_phys(secondary_startup) would return the physical address of the secondary CPU boot entry point, but on such systems, this would be above the 4GB limit. A separate function, virt_to_idmap(), has been provided to return a usable physical address for functions in the identity mapping, and this must be used in preference to virt_to_phys() or __pa() to find the physical entry point for functions in the identity mapping range. For other systems, virt_to_idmap() and virt_to_phys() return identical physical addresses. Acked-by: Santosh Shilimkar Acked-by: Nicolas Pitre Tested-by Vitaly Andrianov Signed-off-by: Grygorii Strashko [Mark: apply rmk's suggested rewording] Signed-off-by: Mark Rutland Cc: Russell King Signed-off-by: Will Deacon --- arch/arm/kernel/psci_smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 28a1db4da704..244aaddfbfda 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -51,7 +51,7 @@ static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (psci_ops.cpu_on) return psci_ops.cpu_on(cpu_logical_map(cpu), - __pa(secondary_startup)); + virt_to_idmap(&secondary_startup)); return -ENODEV; } -- cgit v1.2.3 From be120397e7709d9d5ed88317a385ce864a2603bc Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 31 Jul 2015 15:46:19 +0100 Subject: ARM: migrate to common PSCI client code Now that the common PSCI client code has been factored out to drivers/firmware, and made safe for 32-bit use, move the 32-bit ARM code over to it. This results in a moderate reduction of duplicated lines, and will prevent further duplication as the PSCI client code is updated for PSCI 1.0 and beyond. The two legacy platform users of the PSCI invocation code are updated to account for interface changes. In both cases the power state parameter (which is constant) is now generated using macros, so that the pack/unpack logic can be killed in preparation for PSCI 1.0 power state changes. Signed-off-by: Mark Rutland Acked-by: Rob Herring Cc: Catalin Marinas Cc: Ashwin Chaugule Cc: Lorenzo Pieralisi Cc: Russell King Cc: Will Deacon Signed-off-by: Will Deacon --- arch/arm/Kconfig | 1 + arch/arm/include/asm/psci.h | 23 --- arch/arm/kernel/Makefile | 2 +- arch/arm/kernel/psci.c | 299 -------------------------------------- arch/arm/kernel/psci_smp.c | 29 +++- arch/arm/kernel/setup.c | 3 +- arch/arm/mach-highbank/highbank.c | 2 +- arch/arm/mach-highbank/pm.c | 16 +- drivers/cpuidle/cpuidle-calxeda.c | 15 +- 9 files changed, 46 insertions(+), 344 deletions(-) delete mode 100644 arch/arm/kernel/psci.c (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1c5021002fe4..f5cd68425d8d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1496,6 +1496,7 @@ config HOTPLUG_CPU config ARM_PSCI bool "Support for the ARM Power State Coordination Interface (PSCI)" depends on CPU_V7 + select ARM_PSCI_FW help Say Y here if you want Linux to communicate with system firmware implementing the PSCI specification for CPU-centric power diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index c25ef3ec6d1f..68ee3ce17b82 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -14,34 +14,11 @@ #ifndef __ASM_ARM_PSCI_H #define __ASM_ARM_PSCI_H -#define PSCI_POWER_STATE_TYPE_STANDBY 0 -#define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 - -struct psci_power_state { - u16 id; - u8 type; - u8 affinity_level; -}; - -struct psci_operations { - int (*cpu_suspend)(struct psci_power_state state, - unsigned long entry_point); - int (*cpu_off)(struct psci_power_state state); - int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); - int (*migrate)(unsigned long cpuid); - int (*affinity_info)(unsigned long target_affinity, - unsigned long lowest_affinity_level); - int (*migrate_info_type)(void); -}; - -extern struct psci_operations psci_ops; extern struct smp_operations psci_smp_ops; #ifdef CONFIG_ARM_PSCI -int psci_init(void); bool psci_smp_available(void); #else -static inline int psci_init(void) { return 0; } static inline bool psci_smp_available(void) { return false; } #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index e69f7a19735d..3b995f5c524d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -89,7 +89,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o ifeq ($(CONFIG_ARM_PSCI),y) -obj-y += psci.o psci-call.o +obj-y += psci-call.o obj-$(CONFIG_SMP) += psci_smp.o endif diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c deleted file mode 100644 index f90fdf4ce7c7..000000000000 --- a/arch/arm/kernel/psci.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Copyright (C) 2012 ARM Limited - * - * Author: Will Deacon - */ - -#define pr_fmt(fmt) "psci: " fmt - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -struct psci_operations psci_ops; - -static int (*invoke_psci_fn)(u32, u32, u32, u32); -typedef int (*psci_initcall_t)(const struct device_node *); - -asmlinkage int __invoke_psci_fn_hvc(u32, u32, u32, u32); -asmlinkage int __invoke_psci_fn_smc(u32, u32, u32, u32); - -enum psci_function { - PSCI_FN_CPU_SUSPEND, - PSCI_FN_CPU_ON, - PSCI_FN_CPU_OFF, - PSCI_FN_MIGRATE, - PSCI_FN_AFFINITY_INFO, - PSCI_FN_MIGRATE_INFO_TYPE, - PSCI_FN_MAX, -}; - -static u32 psci_function_id[PSCI_FN_MAX]; - -static int psci_to_linux_errno(int errno) -{ - switch (errno) { - case PSCI_RET_SUCCESS: - return 0; - case PSCI_RET_NOT_SUPPORTED: - return -EOPNOTSUPP; - case PSCI_RET_INVALID_PARAMS: - return -EINVAL; - case PSCI_RET_DENIED: - return -EPERM; - }; - - return -EINVAL; -} - -static u32 psci_power_state_pack(struct psci_power_state state) -{ - return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT) - & PSCI_0_2_POWER_STATE_ID_MASK) | - ((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT) - & PSCI_0_2_POWER_STATE_TYPE_MASK) | - ((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT) - & PSCI_0_2_POWER_STATE_AFFL_MASK); -} - -static int psci_get_version(void) -{ - int err; - - err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0); - return err; -} - -static int psci_cpu_suspend(struct psci_power_state state, - unsigned long entry_point) -{ - int err; - u32 fn, power_state; - - fn = psci_function_id[PSCI_FN_CPU_SUSPEND]; - power_state = psci_power_state_pack(state); - err = invoke_psci_fn(fn, power_state, entry_point, 0); - return psci_to_linux_errno(err); -} - -static int psci_cpu_off(struct psci_power_state state) -{ - int err; - u32 fn, power_state; - - fn = psci_function_id[PSCI_FN_CPU_OFF]; - power_state = psci_power_state_pack(state); - err = invoke_psci_fn(fn, power_state, 0, 0); - return psci_to_linux_errno(err); -} - -static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point) -{ - int err; - u32 fn; - - fn = psci_function_id[PSCI_FN_CPU_ON]; - err = invoke_psci_fn(fn, cpuid, entry_point, 0); - return psci_to_linux_errno(err); -} - -static int psci_migrate(unsigned long cpuid) -{ - int err; - u32 fn; - - fn = psci_function_id[PSCI_FN_MIGRATE]; - err = invoke_psci_fn(fn, cpuid, 0, 0); - return psci_to_linux_errno(err); -} - -static int psci_affinity_info(unsigned long target_affinity, - unsigned long lowest_affinity_level) -{ - int err; - u32 fn; - - fn = psci_function_id[PSCI_FN_AFFINITY_INFO]; - err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0); - return err; -} - -static int psci_migrate_info_type(void) -{ - int err; - u32 fn; - - fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE]; - err = invoke_psci_fn(fn, 0, 0, 0); - return err; -} - -static int get_set_conduit_method(struct device_node *np) -{ - const char *method; - - pr_info("probing for conduit method from DT.\n"); - - if (of_property_read_string(np, "method", &method)) { - pr_warn("missing \"method\" property\n"); - return -ENXIO; - } - - if (!strcmp("hvc", method)) { - invoke_psci_fn = __invoke_psci_fn_hvc; - } else if (!strcmp("smc", method)) { - invoke_psci_fn = __invoke_psci_fn_smc; - } else { - pr_warn("invalid \"method\" property: %s\n", method); - return -EINVAL; - } - return 0; -} - -static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd) -{ - invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0); -} - -static void psci_sys_poweroff(void) -{ - invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0); -} - -/* - * PSCI Function IDs for v0.2+ are well defined so use - * standard values. - */ -static int psci_0_2_init(struct device_node *np) -{ - int err, ver; - - err = get_set_conduit_method(np); - - if (err) - goto out_put_node; - - ver = psci_get_version(); - - if (ver == PSCI_RET_NOT_SUPPORTED) { - /* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */ - pr_err("PSCI firmware does not comply with the v0.2 spec.\n"); - err = -EOPNOTSUPP; - goto out_put_node; - } else { - pr_info("PSCIv%d.%d detected in firmware.\n", - PSCI_VERSION_MAJOR(ver), - PSCI_VERSION_MINOR(ver)); - - if (PSCI_VERSION_MAJOR(ver) == 0 && - PSCI_VERSION_MINOR(ver) < 2) { - err = -EINVAL; - pr_err("Conflicting PSCI version detected.\n"); - goto out_put_node; - } - } - - pr_info("Using standard PSCI v0.2 function IDs\n"); - psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_CPU_SUSPEND; - psci_ops.cpu_suspend = psci_cpu_suspend; - - psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF; - psci_ops.cpu_off = psci_cpu_off; - - psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_CPU_ON; - psci_ops.cpu_on = psci_cpu_on; - - psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_MIGRATE; - psci_ops.migrate = psci_migrate; - - psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN_AFFINITY_INFO; - psci_ops.affinity_info = psci_affinity_info; - - psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] = - PSCI_0_2_FN_MIGRATE_INFO_TYPE; - psci_ops.migrate_info_type = psci_migrate_info_type; - - arm_pm_restart = psci_sys_reset; - - pm_power_off = psci_sys_poweroff; - -out_put_node: - of_node_put(np); - return err; -} - -/* - * PSCI < v0.2 get PSCI Function IDs via DT. - */ -static int psci_0_1_init(struct device_node *np) -{ - u32 id; - int err; - - err = get_set_conduit_method(np); - - if (err) - goto out_put_node; - - pr_info("Using PSCI v0.1 Function IDs from DT\n"); - - if (!of_property_read_u32(np, "cpu_suspend", &id)) { - psci_function_id[PSCI_FN_CPU_SUSPEND] = id; - psci_ops.cpu_suspend = psci_cpu_suspend; - } - - if (!of_property_read_u32(np, "cpu_off", &id)) { - psci_function_id[PSCI_FN_CPU_OFF] = id; - psci_ops.cpu_off = psci_cpu_off; - } - - if (!of_property_read_u32(np, "cpu_on", &id)) { - psci_function_id[PSCI_FN_CPU_ON] = id; - psci_ops.cpu_on = psci_cpu_on; - } - - if (!of_property_read_u32(np, "migrate", &id)) { - psci_function_id[PSCI_FN_MIGRATE] = id; - psci_ops.migrate = psci_migrate; - } - -out_put_node: - of_node_put(np); - return err; -} - -static const struct of_device_id psci_of_match[] __initconst = { - { .compatible = "arm,psci", .data = psci_0_1_init}, - { .compatible = "arm,psci-0.2", .data = psci_0_2_init}, - {}, -}; - -int __init psci_init(void) -{ - struct device_node *np; - const struct of_device_id *matched_np; - psci_initcall_t init_fn; - - np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np); - if (!np) - return -ENODEV; - - init_fn = (psci_initcall_t)matched_np->data; - return init_fn(np); -} diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 244aaddfbfda..61c04b02faeb 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -17,6 +17,8 @@ #include #include #include +#include + #include #include @@ -56,17 +58,29 @@ static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) } #ifdef CONFIG_HOTPLUG_CPU +int psci_cpu_disable(unsigned int cpu) +{ + /* Fail early if we don't have CPU_OFF support */ + if (!psci_ops.cpu_off) + return -EOPNOTSUPP; + + /* Trusted OS will deny CPU_OFF */ + if (psci_tos_resident_on(cpu)) + return -EPERM; + + return 0; +} + void __ref psci_cpu_die(unsigned int cpu) { - const struct psci_power_state ps = { - .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, - }; + u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN << + PSCI_0_2_POWER_STATE_TYPE_SHIFT; - if (psci_ops.cpu_off) - psci_ops.cpu_off(ps); + if (psci_ops.cpu_off) + psci_ops.cpu_off(state); - /* We should never return */ - panic("psci: cpu %d failed to shutdown\n", cpu); + /* We should never return */ + panic("psci: cpu %d failed to shutdown\n", cpu); } int __ref psci_cpu_kill(unsigned int cpu) @@ -109,6 +123,7 @@ bool __init psci_smp_available(void) struct smp_operations __initdata psci_smp_ops = { .smp_boot_secondary = psci_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = psci_cpu_disable, .cpu_die = psci_cpu_die, .cpu_kill = psci_cpu_kill, #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 36c18b73c1f4..9c38bd42f04b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -972,7 +973,7 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); arm_dt_init_cpu_maps(); - psci_init(); + psci_dt_init(); xen_early_init(); #ifdef CONFIG_SMP if (is_smp()) { diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 231fba0d03e5..6050a14faee6 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -28,8 +28,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 7f2bd85eb935..400311695548 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -16,19 +16,21 @@ #include #include +#include #include #include -#include + +#include + +#define HIGHBANK_SUSPEND_PARAM \ + ((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \ + (1 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \ + (PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT)) static int highbank_suspend_finish(unsigned long val) { - const struct psci_power_state ps = { - .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, - .affinity_level = 1, - }; - - return psci_ops.cpu_suspend(ps, __pa(cpu_resume)); + return psci_ops.cpu_suspend(HIGHBANK_SUSPEND_PARAM, __pa(cpu_resume)); } static int highbank_pm_enter(suspend_state_t state) diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c index c13feec89ea1..ea9728fde9b3 100644 --- a/drivers/cpuidle/cpuidle-calxeda.c +++ b/drivers/cpuidle/cpuidle-calxeda.c @@ -25,16 +25,21 @@ #include #include #include +#include + #include #include -#include + +#include + +#define CALXEDA_IDLE_PARAM \ + ((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \ + (0 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \ + (PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT)) static int calxeda_idle_finish(unsigned long val) { - const struct psci_power_state ps = { - .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, - }; - return psci_ops.cpu_suspend(ps, __pa(cpu_resume)); + return psci_ops.cpu_suspend(CALXEDA_IDLE_PARAM, __pa(cpu_resume)); } static int calxeda_pwrdown_idle(struct cpuidle_device *dev, -- cgit v1.2.3