From 8bd26e3a7e49af2697449bbcb7187a39dc85d672 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 17 Jun 2013 15:43:14 -0400 Subject: arm: delete __cpuinit/__CPUINIT usage from all ARM users The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker --- arch/arm/common/mcpm_platsmp.c | 4 ++-- arch/arm/include/asm/arch_timer.h | 2 +- arch/arm/kernel/head-common.S | 1 - arch/arm/kernel/head-nommu.S | 1 - arch/arm/kernel/head.S | 1 - arch/arm/kernel/hw_breakpoint.c | 4 ++-- arch/arm/kernel/perf_event_cpu.c | 6 +++--- arch/arm/kernel/psci_smp.c | 3 +-- arch/arm/kernel/smp.c | 18 +++++++++--------- arch/arm/kernel/smp_twd.c | 6 +++--- arch/arm/lib/delay.c | 2 +- arch/arm/mach-exynos/headsmp.S | 2 -- arch/arm/mach-exynos/platsmp.c | 4 ++-- arch/arm/mach-highbank/platsmp.c | 2 +- arch/arm/mach-imx/platsmp.c | 2 +- arch/arm/mach-keystone/platsmp.c | 2 +- arch/arm/mach-msm/headsmp.S | 2 -- arch/arm/mach-msm/platsmp.c | 6 +++--- arch/arm/mach-msm/timer.c | 4 ++-- arch/arm/mach-mvebu/coherency.c | 2 +- arch/arm/mach-mvebu/headsmp.S | 2 -- arch/arm/mach-mvebu/platsmp.c | 5 ++--- arch/arm/mach-omap2/omap-headsmp.S | 2 -- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 2 +- arch/arm/mach-omap2/omap-smp.c | 4 ++-- arch/arm/mach-omap2/omap-wakeupgen.c | 4 ++-- arch/arm/mach-prima2/headsmp.S | 2 -- arch/arm/mach-prima2/platsmp.c | 4 ++-- arch/arm/mach-shmobile/headsmp-scu.S | 1 - arch/arm/mach-shmobile/headsmp.S | 2 -- arch/arm/mach-shmobile/smp-emev2.c | 2 +- arch/arm/mach-shmobile/smp-r8a7779.c | 2 +- arch/arm/mach-shmobile/smp-sh73a0.c | 2 +- arch/arm/mach-socfpga/headsmp.S | 1 - arch/arm/mach-socfpga/platsmp.c | 2 +- arch/arm/mach-spear/generic.h | 2 +- arch/arm/mach-spear/platsmp.c | 4 ++-- arch/arm/mach-sti/platsmp.c | 6 +++--- arch/arm/mach-tegra/platsmp.c | 4 ++-- arch/arm/mach-tegra/pm.c | 2 +- arch/arm/mach-ux500/platsmp.c | 4 ++-- arch/arm/mach-zynq/common.h | 2 +- arch/arm/mach-zynq/headsmp.S | 2 -- arch/arm/mach-zynq/platsmp.c | 6 +++--- arch/arm/mm/proc-arm1020.S | 2 -- arch/arm/mm/proc-arm1020e.S | 2 -- arch/arm/mm/proc-arm1022.S | 2 -- arch/arm/mm/proc-arm1026.S | 3 --- arch/arm/mm/proc-arm720.S | 2 -- arch/arm/mm/proc-arm740.S | 2 -- arch/arm/mm/proc-arm7tdmi.S | 2 -- arch/arm/mm/proc-arm920.S | 2 -- arch/arm/mm/proc-arm922.S | 2 -- arch/arm/mm/proc-arm925.S | 2 -- arch/arm/mm/proc-arm926.S | 2 -- arch/arm/mm/proc-arm940.S | 2 -- arch/arm/mm/proc-arm946.S | 2 -- arch/arm/mm/proc-arm9tdmi.S | 2 -- arch/arm/mm/proc-fa526.S | 2 -- arch/arm/mm/proc-feroceon.S | 2 -- arch/arm/mm/proc-mohawk.S | 2 -- arch/arm/mm/proc-sa110.S | 2 -- arch/arm/mm/proc-sa1100.S | 2 -- arch/arm/mm/proc-v6.S | 2 -- arch/arm/mm/proc-v7-2level.S | 4 ---- arch/arm/mm/proc-v7-3level.S | 4 ---- arch/arm/mm/proc-v7.S | 2 -- arch/arm/mm/proc-xsc3.S | 2 -- arch/arm/mm/proc-xscale.S | 2 -- arch/arm/plat-versatile/platsmp.c | 6 +++--- 70 files changed, 64 insertions(+), 140 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 510e5b13aa2e..1bc34c7567fd 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -19,7 +19,7 @@ #include #include -static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned int mpidr, pcpu, pcluster, ret; extern void secondary_startup(void); @@ -40,7 +40,7 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i return 0; } -static void __cpuinit mcpm_secondary_init(unsigned int cpu) +static void mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); } diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index accefe099182..e406d575c94f 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -89,7 +89,7 @@ static inline u64 arch_counter_get_cntvct(void) return cval; } -static inline void __cpuinit arch_counter_set_user_access(void) +static inline void arch_counter_set_user_access(void) { u32 cntkctl; diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 76ab5ca50610..47cd974e57ea 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -149,7 +149,6 @@ ENDPROC(lookup_processor_type) * r5 = proc_info pointer in physical address space * r9 = cpuid (preserved) */ - __CPUINIT __lookup_processor_type: adr r3, __lookup_processor_type_data ldmia r3, {r4 - r6} diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 75f14cc3e073..b361de143756 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -87,7 +87,6 @@ ENTRY(stext) ENDPROC(stext) #ifdef CONFIG_SMP - __CPUINIT ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 45e8935cae4e..9cf6063020ae 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -343,7 +343,6 @@ __turn_mmu_on_loc: .long __turn_mmu_on_end #if defined(CONFIG_SMP) - __CPUINIT ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 1fd749ee4a1b..7b95de601357 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -1020,7 +1020,7 @@ out_mdbgen: cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu)); } -static int __cpuinit dbg_reset_notify(struct notifier_block *self, +static int dbg_reset_notify(struct notifier_block *self, unsigned long action, void *cpu) { if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) @@ -1029,7 +1029,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata dbg_reset_nb = { +static struct notifier_block dbg_reset_nb = { .notifier_call = dbg_reset_notify, }; diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index 1f2740e3dbc0..aebe0e99c153 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -157,8 +157,8 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu) * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading * junk values out of them. */ -static int __cpuinit cpu_pmu_notify(struct notifier_block *b, - unsigned long action, void *hcpu) +static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, + void *hcpu) { if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) return NOTIFY_DONE; @@ -171,7 +171,7 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { +static struct notifier_block cpu_pmu_hotplug_notifier = { .notifier_call = cpu_pmu_notify, }; diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 219f1d73572a..70ded3fb42d9 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -46,8 +46,7 @@ extern void secondary_startup(void); -static int __cpuinit psci_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (psci_ops.cpu_on) return psci_ops.cpu_on(cpu_logical_map(cpu), diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c5fb5469054b..c2b4f8f0be9a 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -58,7 +58,7 @@ struct secondary_data secondary_data; * control for which core is the next to come out of the secondary * boot "holding pen" */ -volatile int __cpuinitdata pen_release = -1; +volatile int pen_release = -1; enum ipi_msg_type { IPI_WAKEUP, @@ -86,7 +86,7 @@ static unsigned long get_arch_pgd(pgd_t *pgd) return pgdir >> ARCH_PGD_SHIFT; } -int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) +int __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -138,7 +138,7 @@ void __init smp_init_cpus(void) smp_ops.smp_init_cpus(); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +int boot_secondary(unsigned int cpu, struct task_struct *idle) { if (smp_ops.smp_boot_secondary) return smp_ops.smp_boot_secondary(cpu, idle); @@ -170,7 +170,7 @@ static int platform_cpu_disable(unsigned int cpu) /* * __cpu_disable runs on the processor to be shutdown. */ -int __cpuinit __cpu_disable(void) +int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); int ret; @@ -216,7 +216,7 @@ static DECLARE_COMPLETION(cpu_died); * called on the thread which is asking for a CPU to be shutdown - * waits until shutdown has completed, or it is timed out. */ -void __cpuinit __cpu_die(unsigned int cpu) +void __cpu_die(unsigned int cpu) { if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) { pr_err("CPU%u: cpu didn't die\n", cpu); @@ -306,7 +306,7 @@ void __ref cpu_die(void) * Called by both boot and secondaries to move global data into * per-processor storage. */ -static void __cpuinit smp_store_cpu_info(unsigned int cpuid) +static void smp_store_cpu_info(unsigned int cpuid) { struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); @@ -322,7 +322,7 @@ static void percpu_timer_setup(void); * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. */ -asmlinkage void __cpuinit secondary_start_kernel(void) +asmlinkage void secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; unsigned int cpu; @@ -521,7 +521,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode, { } -static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt) +static void broadcast_timer_setup(struct clock_event_device *evt) { evt->name = "dummy_timer"; evt->features = CLOCK_EVT_FEAT_ONESHOT | @@ -550,7 +550,7 @@ int local_timer_register(struct local_timer_ops *ops) } #endif -static void __cpuinit percpu_timer_setup(void) +static void percpu_timer_setup(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index f6fd1d4398c6..25956204ef23 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -187,7 +187,7 @@ core_initcall(twd_cpufreq_init); #endif -static void __cpuinit twd_calibrate_rate(void) +static void twd_calibrate_rate(void) { unsigned long count; u64 waitjiffies; @@ -265,7 +265,7 @@ static void twd_get_clock(struct device_node *np) /* * Setup the local clock events for a CPU. */ -static int __cpuinit twd_timer_setup(struct clock_event_device *clk) +static int twd_timer_setup(struct clock_event_device *clk) { struct clock_event_device **this_cpu_clk; int cpu = smp_processor_id(); @@ -308,7 +308,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk) return 0; } -static struct local_timer_ops twd_lt_ops __cpuinitdata = { +static struct local_timer_ops twd_lt_ops = { .setup = twd_timer_setup, .stop = twd_timer_stop, }; diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 64dbfa57204a..5306de350133 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -86,7 +86,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer) } } -unsigned long __cpuinit calibrate_delay_is_known(void) +unsigned long calibrate_delay_is_known(void) { delay_calibrated = true; return lpj_fine; diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index 5364d4bfa8bc..cdd9d91e9933 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -13,8 +13,6 @@ #include #include - __CPUINIT - /* * exynos4 specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index deba1308ff16..58b43e6f9262 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -75,7 +75,7 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit exynos_secondary_init(unsigned int cpu) +static void exynos_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -90,7 +90,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index a984573e0d02..32d75cf55cbc 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -24,7 +24,7 @@ extern void secondary_startup(void); -static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { highbank_set_cpu_jump(cpu, secondary_startup); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index c6e1ab544882..1f24c1fdfea4 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -53,7 +53,7 @@ void imx_scu_standby_enable(void) writel_relaxed(val, scu_base); } -static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); imx_enable_cpu(cpu, true); diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 1d4181e1daf2..14378e3fef16 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -21,7 +21,7 @@ #include "keystone.h" -static int __cpuinit keystone_smp_boot_secondary(unsigned int cpu, +static int keystone_smp_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long start = virt_to_phys(&secondary_startup); diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S index bcd5af223dea..6c62c3f82fe6 100644 --- a/arch/arm/mach-msm/headsmp.S +++ b/arch/arm/mach-msm/headsmp.S @@ -11,8 +11,6 @@ #include #include - __CPUINIT - /* * MSM specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 00cdb0a5dac8..3f06edcdd0ce 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -38,7 +38,7 @@ static inline int get_core_count(void) return ((read_cpuid_id() >> 4) & 3) + 1; } -static void __cpuinit msm_secondary_init(unsigned int cpu) +static void msm_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -54,7 +54,7 @@ static void __cpuinit msm_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static __cpuinit void prepare_cold_cpu(unsigned int cpu) +static void prepare_cold_cpu(unsigned int cpu) { int ret; ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup), @@ -73,7 +73,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu) "address\n"); } -static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; static int cold_boot_done; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index b6418fd5fe0d..8697cfc0d0b6 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -139,7 +139,7 @@ static struct clocksource msm_clocksource = { }; #ifdef CONFIG_LOCAL_TIMERS -static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) +static int msm_local_timer_setup(struct clock_event_device *evt) { /* Use existing clock_event for cpu 0 */ if (!smp_processor_id()) @@ -164,7 +164,7 @@ static void msm_local_timer_stop(struct clock_event_device *evt) disable_percpu_irq(evt->irq); } -static struct local_timer_ops msm_local_timer_ops __cpuinitdata = { +static struct local_timer_ops msm_local_timer_ops = { .setup = msm_local_timer_setup, .stop = msm_local_timer_stop, }; diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index be117591f7f2..4c24303ec481 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -28,7 +28,7 @@ #include #include "armada-370-xp.h" -unsigned long __cpuinitdata coherency_phys_base; +unsigned long coherency_phys_base; static void __iomem *coherency_base; static void __iomem *coherency_cpu_base; diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 7147300c8af2..8a1b0c96e9ec 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -21,8 +21,6 @@ #include #include - __CPUINIT - /* * Armada XP specific entry point for secondary CPUs. * We add the CPU to the coherency fabric and then jump to secondary diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index 93f2f3ab45f1..ce81d3031405 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -71,13 +71,12 @@ void __init set_secondary_cpus_clock(void) } } -static void __cpuinit armada_xp_secondary_init(unsigned int cpu) +static void armada_xp_secondary_init(unsigned int cpu) { armada_xp_mpic_smp_cpu_init(); } -static int __cpuinit armada_xp_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { pr_info("Booting CPU %d\n", cpu); diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4ea308114165..75e92952c18e 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -20,8 +20,6 @@ #include "omap44xx.h" - __CPUINIT - /* Physical address needed since MMU not enabled yet on secondary core */ #define AUX_CORE_BOOT0_PA 0x48281800 diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index f993a4188701..f991016e2a6a 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -291,7 +291,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) * @cpu : CPU ID * @power_state: CPU low power state. */ -int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) +int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); unsigned int cpu_state = 0; diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 98a11463a843..8708b2a9da45 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -51,7 +51,7 @@ void __iomem *omap4_get_scu_base(void) return scu_base; } -static void __cpuinit omap4_secondary_init(unsigned int cpu) +static void omap4_secondary_init(unsigned int cpu) { /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. @@ -72,7 +72,7 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index f8bb3b9b6a76..813c61558a5f 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -323,8 +323,8 @@ static void irq_save_secure_context(void) #endif #ifdef CONFIG_HOTPLUG_CPU -static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self, - unsigned long action, void *hcpu) +static int irq_cpu_hotplug_notify(struct notifier_block *self, + unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)hcpu; diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S index 5b8a408d8921..d86fe33c5f53 100644 --- a/arch/arm/mach-prima2/headsmp.S +++ b/arch/arm/mach-prima2/headsmp.S @@ -9,8 +9,6 @@ #include #include - __CPUINIT - /* * SIRFSOC specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c index 1c3de7bed841..3dbcb1ab6e37 100644 --- a/arch/arm/mach-prima2/platsmp.c +++ b/arch/arm/mach-prima2/platsmp.c @@ -44,7 +44,7 @@ void __init sirfsoc_map_scu(void) scu_base = (void __iomem *)SIRFSOC_VA(base); } -static void __cpuinit sirfsoc_secondary_init(unsigned int cpu) +static void sirfsoc_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -65,7 +65,7 @@ static struct of_device_id rsc_ids[] = { {}, }; -static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; struct device_node *np; diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 6f9865467258..bfd920083a3b 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -23,7 +23,6 @@ #include #include - __CPUINIT /* * Boot code for secondary CPUs. * diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 559d1ce5f57e..a9d212498987 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -14,8 +14,6 @@ #include #include - __CPUINIT - ENTRY(shmobile_invalidate_start) bl v7_invalidate_l1 b secondary_startup diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 80991b35f4ac..22a05a869d25 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -30,7 +30,7 @@ #define EMEV2_SCU_BASE 0x1e000000 -static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle) { arch_send_wakeup_ipi_mask(cpumask_of(cpu_logical_map(cpu))); return 0; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 526cfaae81c1..9bdf810f2a87 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -81,7 +81,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu) return ret ? ret : 1; } -static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle) { struct r8a7779_pm_ch *ch = NULL; int ret = -EIO; diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index d613113a04bd..d5fc3ed4e315 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -48,7 +48,7 @@ void __init sh73a0_register_twd(void) } #endif -static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle) { cpu = cpu_logical_map(cpu); diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 9004bfb1756e..95c115d8b5ee 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -10,7 +10,6 @@ #include #include - __CPUINIT .arch armv7-a ENTRY(secondary_trampoline) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index b51ce8c7929d..5356a72bc8ce 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -29,7 +29,7 @@ #include "core.h" -static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 904f2c907b46..a99d90a4d09c 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -37,7 +37,7 @@ void __init spear13xx_l2x0_init(void); void spear_restart(enum reboot_mode, const char *); void spear13xx_secondary_startup(void); -void __cpuinit spear13xx_cpu_die(unsigned int cpu); +void spear13xx_cpu_die(unsigned int cpu); extern struct smp_operations spear13xx_smp_ops; diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c index 9c4c722c954e..5c4a19887b2b 100644 --- a/arch/arm/mach-spear/platsmp.c +++ b/arch/arm/mach-spear/platsmp.c @@ -24,7 +24,7 @@ static DEFINE_SPINLOCK(boot_lock); static void __iomem *scu_base = IOMEM(VA_SCU_BASE); -static void __cpuinit spear13xx_secondary_init(unsigned int cpu) +static void spear13xx_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -40,7 +40,7 @@ static void __cpuinit spear13xx_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int spear13xx_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index 977a863468fc..dce50d983a8e 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -27,7 +27,7 @@ #include "smp.h" -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); @@ -37,7 +37,7 @@ static void __cpuinit write_pen_release(int val) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit sti_secondary_init(unsigned int cpu) +void sti_secondary_init(unsigned int cpu) { trace_hardirqs_off(); @@ -54,7 +54,7 @@ void __cpuinit sti_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit sti_boot_secondary(unsigned int cpu, struct task_struct *idle) +int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 24db4ac428ae..97b33a2a2d75 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -35,7 +35,7 @@ static cpumask_t tegra_cpu_init_mask; -static void __cpuinit tegra_secondary_init(unsigned int cpu) +static void tegra_secondary_init(unsigned int cpu) { cpumask_set_cpu(cpu, &tegra_cpu_init_mask); } @@ -167,7 +167,7 @@ static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle) return ret; } -static int __cpuinit tegra_boot_secondary(unsigned int cpu, +static int tegra_boot_secondary(unsigned int cpu, struct task_struct *idle) { if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20) diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 94e69bee3da5..261fec140c06 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -191,7 +191,7 @@ static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { [TEGRA_SUSPEND_LP0] = "LP0", }; -static int __cpuinit tegra_suspend_enter(suspend_state_t state) +static int tegra_suspend_enter(suspend_state_t state) { enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 14d90469392f..1f296e796a4f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -54,7 +54,7 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -static void __cpuinit ux500_secondary_init(unsigned int cpu) +static void ux500_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -69,7 +69,7 @@ static void __cpuinit ux500_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index fbbd0e21c404..3040d219570f 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -27,7 +27,7 @@ extern void secondary_startup(void); extern char zynq_secondary_trampoline; extern char zynq_secondary_trampoline_jump; extern char zynq_secondary_trampoline_end; -extern int __cpuinit zynq_cpun_start(u32 address, int cpu); +extern int zynq_cpun_start(u32 address, int cpu); extern struct smp_operations zynq_smp_ops __initdata; #endif diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index d183cd234a9b..d4cd5f34fe5c 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -9,8 +9,6 @@ #include #include - __CPUINIT - ENTRY(zynq_secondary_trampoline) ldr r0, [pc] bx r0 diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index 023f225493f2..689fbbc3d9c8 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -30,11 +30,11 @@ /* * Store number of cores in the system * Because of scu_get_core_count() must be in __init section and can't - * be called from zynq_cpun_start() because it is in __cpuinit section. + * be called from zynq_cpun_start() because it is not in __init section. */ static int ncores; -int __cpuinit zynq_cpun_start(u32 address, int cpu) +int zynq_cpun_start(u32 address, int cpu) { u32 trampoline_code_size = &zynq_secondary_trampoline_end - &zynq_secondary_trampoline; @@ -92,7 +92,7 @@ int __cpuinit zynq_cpun_start(u32 address, int cpu) } EXPORT_SYMBOL(zynq_cpun_start); -static int __cpuinit zynq_boot_secondary(unsigned int cpu, +static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle) { return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 2bb61e703d6c..d1a2d05971e0 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -443,8 +443,6 @@ ENTRY(cpu_arm1020_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020_setup, #function __arm1020_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 8f96aa40f510..9d89405c3d03 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm1020e_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1020e_setup, #function __arm1020e_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index 8ebe4a469a22..6f01a0ae3b30 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -407,8 +407,6 @@ ENTRY(cpu_arm1022_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm1022_setup, #function __arm1022_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 093fc7e520c3..4799a24b43e6 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -396,9 +396,6 @@ ENTRY(cpu_arm1026_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - - __CPUINIT - .type __arm1026_setup, #function __arm1026_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 0ac908c7ade1..d42c37f9f5bc 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -116,8 +116,6 @@ ENTRY(cpu_arm720_reset) ENDPROC(cpu_arm720_reset) .popsection - __CPUINIT - .type __arm710_setup, #function __arm710_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index fde2d2a794cf..9b0ae90cbf17 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -60,8 +60,6 @@ ENTRY(cpu_arm740_reset) ENDPROC(cpu_arm740_reset) .popsection - __CPUINIT - .type __arm740_setup, #function __arm740_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 6ddea3e464bd..f6cc3f63ce39 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm7tdmi_reset) ENDPROC(cpu_arm7tdmi_reset) .popsection - __CPUINIT - .type __arm7tdmi_setup, #function __arm7tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 2556cf1c2da1..549557df6d57 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -410,8 +410,6 @@ ENTRY(cpu_arm920_do_resume) ENDPROC(cpu_arm920_do_resume) #endif - __CPUINIT - .type __arm920_setup, #function __arm920_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 4464c49d7449..2a758b06c6f6 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -388,8 +388,6 @@ ENTRY(cpu_arm922_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm922_setup, #function __arm922_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 281eb9b9c1d6..97448c3acf38 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -438,8 +438,6 @@ ENTRY(cpu_arm925_set_pte_ext) #endif /* CONFIG_MMU */ mov pc, lr - __CPUINIT - .type __arm925_setup, #function __arm925_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 344c8a548cc0..0f098f407c9f 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -425,8 +425,6 @@ ENTRY(cpu_arm926_do_resume) ENDPROC(cpu_arm926_do_resume) #endif - __CPUINIT - .type __arm926_setup, #function __arm926_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 8da189d4a402..1c39a704ff6e 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -273,8 +273,6 @@ ENDPROC(arm940_dma_unmap_area) @ define struct cpu_cache_fns (see and proc-macros.S) define_cache_functions arm940 - __CPUINIT - .type __arm940_setup, #function __arm940_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index f666cf34075a..0289cd905e73 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -326,8 +326,6 @@ ENTRY(cpu_arm946_dcache_clean_area) mcr p15, 0, r0, c7, c10, 4 @ drain WB mov pc, lr - __CPUINIT - .type __arm946_setup, #function __arm946_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 8881391dfb9e..f51197ba754a 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -51,8 +51,6 @@ ENTRY(cpu_arm9tdmi_reset) ENDPROC(cpu_arm9tdmi_reset) .popsection - __CPUINIT - .type __arm9tdmi_setup, #function __arm9tdmi_setup: mov pc, lr diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index aaeb6c127c7a..2dfc0f1d3bfd 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -135,8 +135,6 @@ ENTRY(cpu_fa526_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __fa526_setup, #function __fa526_setup: /* On return of this routine, r0 must carry correct flags for CFG register */ diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 4106b09e0c29..d5146b98c8d1 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -514,8 +514,6 @@ ENTRY(cpu_feroceon_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __feroceon_setup, #function __feroceon_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 0b60dd3d742a..40acba595731 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -383,8 +383,6 @@ ENTRY(cpu_mohawk_do_resume) ENDPROC(cpu_mohawk_do_resume) #endif - __CPUINIT - .type __mohawk_setup, #function __mohawk_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 775d70fba937..c45319c8f1d9 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -159,8 +159,6 @@ ENTRY(cpu_sa110_set_pte_ext) #endif mov pc, lr - __CPUINIT - .type __sa110_setup, #function __sa110_setup: mov r10, #0 diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index d92dfd081429..09d241ae2dbe 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -198,8 +198,6 @@ ENTRY(cpu_sa1100_do_resume) ENDPROC(cpu_sa1100_do_resume) #endif - __CPUINIT - .type __sa1100_setup, #function __sa1100_setup: mov r0, #0 diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 2d1ef87328a1..1128064fddcb 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -180,8 +180,6 @@ ENDPROC(cpu_v6_do_resume) .align - __CPUINIT - /* * __v6_setup * diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 9704097c450e..f64afb9f1bd5 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -160,8 +160,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 .endm - __CPUINIT - /* AT * TFR EV X F I D LR S * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM @@ -172,5 +170,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x2120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index 5ffe1956c6d9..c36ac69488c8 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -140,8 +140,6 @@ ENDPROC(cpu_v7_set_pte_ext) mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0 .endm - __CPUINIT - /* * AT * TFR EV X F IHD LR S @@ -153,5 +151,3 @@ ENDPROC(cpu_v7_set_pte_ext) .type v7_crval, #object v7_crval: crval clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c - - .previous diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7ef3ad05df39..5c6d5a3050ea 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -167,8 +167,6 @@ ENDPROC(cpu_pj4b_do_idle) #endif - __CPUINIT - /* * __v7_setup * diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index e8efd83b6f25..dc1645890042 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -446,8 +446,6 @@ ENTRY(cpu_xsc3_do_resume) ENDPROC(cpu_xsc3_do_resume) #endif - __CPUINIT - .type __xsc3_setup, #function __xsc3_setup: mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index e766f889bfd6..d19b1cfcad91 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -558,8 +558,6 @@ ENTRY(cpu_xscale_do_resume) ENDPROC(cpu_xscale_do_resume) #endif - __CPUINIT - .type __xscale_setup, #function __xscale_setup: mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 1e1b2d769748..39895d892c3b 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -23,7 +23,7 @@ * observers, irrespective of whether they're taking part in coherency * or not. This is necessary for the hotplug code to work reliably. */ -static void __cpuinit write_pen_release(int val) +static void write_pen_release(int val) { pen_release = val; smp_wmb(); @@ -33,7 +33,7 @@ static void __cpuinit write_pen_release(int val) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit versatile_secondary_init(unsigned int cpu) +void versatile_secondary_init(unsigned int cpu) { /* * let the primary processor know we're out of the @@ -48,7 +48,7 @@ void __cpuinit versatile_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idle) +int versatile_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; -- cgit v1.2.3 From f5786b8e934e77f76f689c515baa582ff5a196ec Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 21 Jun 2013 15:36:11 +0200 Subject: ARM i.MX53: Fix UART pad configuration The current default pad configuration for UART RX and TX pads sets a 360k pull-down and writes 1 to a reserved bit (1 << 0). It doesn't seem right to me that in idle state, the UART has to keep the signal high against a pull-down resistor. This patch instead sets a 100k pull-up, which incidentally corresponds to the register reset value for all but one (MX53_PAD_KEY_ROW0__UART4_RXD_MUX) pad, and removes the write to the reserved bit. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 3895fbba8fce..569aa9f2c4ed 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -725,15 +725,15 @@ uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 >; }; pinctrl_uart1_2: uart1grp-2 { fsl,pins = < - MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 - MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 >; }; @@ -748,8 +748,8 @@ uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 >; }; @@ -766,17 +766,17 @@ uart3 { pinctrl_uart3_1: uart3grp-1 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 - MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 - MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_uart3_2: uart3grp-2 { fsl,pins = < - MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 - MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 >; }; @@ -785,8 +785,8 @@ uart4 { pinctrl_uart4_1: uart4grp-1 { fsl,pins = < - MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 >; }; }; @@ -794,8 +794,8 @@ uart5 { pinctrl_uart5_1: uart5grp-1 { fsl,pins = < - MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 - MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 >; }; }; -- cgit v1.2.3 From 0d5ca6d973b54f76eaccf86116dd0c66b073afc5 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 23 Jun 2013 17:40:35 +0400 Subject: ARM: i.MX27: Typo fix Signed-off-by: Alexander Shiyan Acked-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mx27.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index e074616d54ca..8a65f192e7f3 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -135,7 +135,7 @@ #define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) #define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) #define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) -#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_MSHC (NR_IRQS_LEGACY + 7) #define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) #define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) #define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) -- cgit v1.2.3 From 3b79cd15bfc5f1ddb5e387310fa3dbb09b81b552 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Wed, 3 Jul 2013 15:29:06 +0800 Subject: ARM: i.MX6Q: correct emi_sel clock muxing The correct muxing for emi_sel clock should be 2b'00 - 396M PFD 2b'01 - PLL3 2b'10 - AXI clk root 2b'11 - 352M PFD This patch corrects the muxing in the clock driver. Signed-off-by: Liu Ying Signed-off-by: Shawn Guo Acked-by: Dirk Behme --- arch/arm/mach-imx/clk-imx6q.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4282e99f5ca1..86567d980b07 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -199,7 +199,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", }; static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; +static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", @@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels)); - clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels)); + clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels)); clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); -- cgit v1.2.3 From 66acaf3f897c9245f5456d884e5ae401700cbc45 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 1 Jul 2013 15:46:05 +0800 Subject: ARM: mxs: saif0 is the clock provider to sgtl5000 These systems all use saif0 as the mclock provider to codec sgtl5000. Reflect that in device tree source, so that sgtl5000 can find the clock by calling clk_get(). Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-apx4devkit.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx28.dtsi | 1 + 4 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 43bf3c796cba..0e7fed47bd8d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -147,7 +147,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; pcf8563: rtc@51 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1f0d38d7b16f..e035f4664b97 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -195,7 +195,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; at24@51 { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 880df2f13be8..44d9da57736e 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -184,7 +184,7 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; - + clocks = <&saif0>; }; eeprom: eeprom@51 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 6a8acb01b1d3..9524a0571281 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -837,6 +837,7 @@ compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + #clock-cells = <0>; clocks = <&clks 53>; dmas = <&dma_apbx 4>; dma-names = "rx-tx"; -- cgit v1.2.3 From 4f71612ee3a1b2d15c8246d926a40c4f7d21cc3b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 10 Jul 2013 14:05:44 +0800 Subject: ARM: imx: fix vf610 enet module clock selection The fec/enet driver calculates MDC rate with the formula below. ref_freq / ((MII_SPEED + 1) x 2) The ref_freq here is the fec internal module clock, which is missing from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly supplies RMII clock (50 MHz) as the source to fec. This results in the situation that fec driver gets ref_freq as 50 MHz, while physically it runs at 66 MHz (fec module clock physically sources from ipg which runs at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041 keeps swithing between Full and Half mode as below. libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half Add the missing module clock for ENET0 and ENET1, and correct the clock supplying in device tree to fix above issue. Thanks to Alison Wang for debugging the issue. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 8 ++++---- arch/arm/mach-imx/clk-vf610.c | 2 ++ include/dt-bindings/clock/vf610-clock.h | 4 +++- 3 files changed, 9 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index e1eb7dadda80..67d929cf9804 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -442,8 +442,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; interrupts = <0 78 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; @@ -453,8 +453,8 @@ compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; interrupts = <0 79 0x04>; - clocks = <&clks VF610_CLK_ENET>, - <&clks VF610_CLK_ENET>, + clocks = <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index d617c0b7c809..b169a396d93b 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); + clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0)); + clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1)); clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index 15e997fa78f2..4aa2b48cd151 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -158,6 +158,8 @@ #define VF610_CLK_GPU_SEL 145 #define VF610_CLK_GPU_EN 146 #define VF610_CLK_GPU2D 147 -#define VF610_CLK_END 148 +#define VF610_CLK_ENET0 148 +#define VF610_CLK_ENET1 149 +#define VF610_CLK_END 150 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ -- cgit v1.2.3 From 15968f1bd4341cfa54023348a4e0b94798211742 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 11 Jul 2013 16:37:47 +0200 Subject: ARM i.MX53: mba53: Fix PWM backlight DT node The i.MX53 PWM controller uses two cells to describe the PWM specifier. Remove the extra unused values from the backlight DT node pwms property. Signed-off-by: Laurent Pinchart Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-mba53.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index aaa33bc99f78..a63090267941 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -27,7 +27,7 @@ backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000 0 0>; + pwms = <&pwm2 0 50000>; brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>; default-brightness-level = <10>; enable-gpios = <&gpio7 7 0>; -- cgit v1.2.3 From ae7cc03e435fe86d95a3fbef52161dbd9f97db77 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 15 Jul 2013 00:39:41 -0700 Subject: ARM: multi_v7: Enabled omap4430 sdp nfsroot By adding support for OCP2SCP, SPI and KS8851 I can also boot test multi_v7_defconfig easily. Note that if using an older u-boot, CONFIG_ARM_ATAG_DTB_COMPAT=y may also be needed for the appended DTB based booting. Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/configs/multi_v7_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index fe0bdc361d2c..120b08edb9a9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -53,6 +53,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_OMAP_OCP2SCP=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y @@ -61,6 +62,7 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y @@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y CONFIG_SPI_TEGRA114=y -- cgit v1.2.3 From 13782a7e2821f62efc747fd26605de4dc823ee29 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 7 Jun 2013 15:01:58 -0700 Subject: ARM: dts: Add missing vmmc2 regulator for twl For some reason vmmc2 regulator is missing for twl. Let's add it. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl4030.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index b3034da00a37..ae6a17aed9ee 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -47,6 +47,12 @@ regulator-max-microvolt = <3150000>; }; + vmmc2: regulator-vmmc2 { + compatible = "ti,twl4030-vmmc2"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <3150000>; + }; + vusb1v5: regulator-vusb1v5 { compatible = "ti,twl4030-vusb1v5"; }; -- cgit v1.2.3 From 84bb08472520882394fe16d7a3548793302563de Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 9 Jun 2013 22:07:47 -0300 Subject: ARM: dts: imx51-babbage: Pass a real clock to the codec On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6dd9486c755b..ad3471ca17c7 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -61,6 +61,16 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + clocks { + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 1>; + }; + }; }; &esdhc1 { @@ -229,6 +239,7 @@ MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; @@ -255,7 +266,7 @@ sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clock-frequency = <26000000>; + clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; -- cgit v1.2.3 From e085cad6c653e20e213a662ef32fb6191ae0197d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 26 Jun 2013 22:29:44 +0900 Subject: ARM: EXYNOS: skip pm support on exynos5440 EXYNOS5440 doesn't support PM and current single image for EXYNOS will be break without this patch. Actually, SSDK5440 cannot boot without this so this should be merged during rc. Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 41c20692a13f..c679db577269 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void) struct clk *pll_base; unsigned int tmp; + if (soc_is_exynos5440()) + return 0; + s3c_pm_init(); /* All wakeup disable */ @@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = { static __init int exynos_pm_syscore_init(void) { + if (soc_is_exynos5440()) + return 0; + register_syscore_ops(&exynos_pm_syscore_ops); return 0; } -- cgit v1.2.3 From ea2761763739619ca49602d891ec3ffb33ffc71b Mon Sep 17 00:00:00 2001 From: Subash Patel Date: Tue, 16 Jul 2013 12:42:13 +0900 Subject: ARM: EXYNOS: change the PHYSMEM_BITS and SECTION_SIZE On EXYNOS5440 there is DRAM on the 36-bit address range. Hence this patch converts the MAX_PHYSMEM_BITS macro to 36 if LPAE is enabled for the ARM architecture. The conventional section size on EXYNOS is 256M due to sparsemem. Since EXYNOS5440 has memory in multiples of 1G in 32-bit and 36-bit range, this has now been modified to 31. Signed-off-by: Subash Patel Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/memory.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h index 374ef2cf7152..2a4cdb7cb326 100644 --- a/arch/arm/mach-exynos/include/mach/memory.h +++ b/arch/arm/mach-exynos/include/mach/memory.h @@ -15,8 +15,13 @@ #define PLAT_PHYS_OFFSET UL(0x40000000) +#ifndef CONFIG_ARM_LPAE /* Maximum of 256MiB in one bank */ #define MAX_PHYSMEM_BITS 32 #define SECTION_SIZE_BITS 28 +#else +#define MAX_PHYSMEM_BITS 36 +#define SECTION_SIZE_BITS 31 +#endif #endif /* __ASM_ARCH_MEMORY_H */ -- cgit v1.2.3 From cfaf8ee2f91607c8955af68538ba849b125fb8d5 Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Tue, 16 Jul 2013 12:42:59 +0900 Subject: ARM: EXYNOS: Enable 64-bit DMA for EXYNOS5440 if LPAE is enabled Allow 64-bit DMA addresses if LPAE is enabled on EXYNOS5440. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 855d4a7b462d..5952e68c76c4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -92,6 +92,7 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 + select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR -- cgit v1.2.3 From 741532c4a995be11815cb72d4d7a48f442a22fea Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 18 Jun 2013 19:04:47 +0300 Subject: ARM: OMAP2+: Provide alias to USB PHY clock Till the OMAP clocks are correctly defined in device tree, use this temporary hack to provide clock alias to the USB PHY clocks. Without this, USB Host & Ethernet will not be functional with device tree boots on Panda and uEVM. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-generic.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e5fbfed69aa2..be5d005ebad2 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = { { } }; +/* + * Create alias for USB host PHY clock. + * Remove this when clock phandle can be provided via DT + */ +static void __init legacy_init_ehci_clk(char *clkname) +{ + int ret; + + ret = clk_add_alias("main_clk", NULL, clkname, NULL); + if (ret) { + pr_err("%s:Failed to add main_clk alias to %s :%d\n", + __func__, clkname, ret); + } +} + static void __init omap_generic_init(void) { omap_sdrc_init(NULL, NULL); @@ -45,10 +61,15 @@ static void __init omap_generic_init(void) * HACK: call display setup code for selected boards to enable omapdss. * This will be removed when omapdss supports DT. */ - if (of_machine_is_compatible("ti,omap4-panda")) + if (of_machine_is_compatible("ti,omap4-panda")) { omap4_panda_display_init_of(); + legacy_init_ehci_clk("auxclk3_ck"); + + } else if (of_machine_is_compatible("ti,omap4-sdp")) omap_4430sdp_display_init_of(); + else if (of_machine_is_compatible("ti,omap5-uevm")) + legacy_init_ehci_clk("auxclk1_ck"); } #ifdef CONFIG_SOC_OMAP2420 -- cgit v1.2.3 From 30f099cd88c8e92206c5e4ccf814ce0362db3d22 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 26 Jun 2013 09:58:16 +0800 Subject: ARM: edma: remove duplicated include from edma.c Remove duplicated include. Signed-off-by: Wei Yongjun Signed-off-by: Sekhar Nori --- arch/arm/common/edma.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index a432e6c1dac1..39ad030ac0c7 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 9c559708b6cda71d8fdabc3f98cb7e98edbd4f0b Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Fri, 12 Jul 2013 15:19:03 +0530 Subject: ARM: davinci: make file local variables static Make file local variables static in mach-davinci. This fixes sparse warnings of the form: arch/arm/mach-davinci/dm355.c:863:27: warning: symbol 'dm355_venc_pdata' was not declared. Should it be static? Cc: Prabhakar Lad Acked-by: Prabhakar Lad Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- arch/arm/mach-davinci/dm355.c | 2 +- arch/arm/mach-davinci/dm365.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index afbc439f11d4..4cdb61c54459 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = { /* * Amplifiers on the board */ -struct ths7303_platform_data ths7303_pdata = { +static struct ths7303_platform_data ths7303_pdata = { .ch_1 = 3, .ch_2 = 3, .ch_3 = 3, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 42ef53f62c6c..86100d179694 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = { }, }; -struct venc_platform_data dm355_venc_pdata = { +static struct venc_platform_data dm355_venc_pdata = { .setup_pinmux = dm355_vpbe_setup_pinmux, .setup_clock = dm355_venc_setup_clock, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index fa7af5eda52d..dad28029ba9b 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = { }, }; -struct venc_platform_data dm365_venc_pdata = { +static struct venc_platform_data dm365_venc_pdata = { .setup_pinmux = dm365_vpbe_setup_pinmux, .setup_clock = dm365_venc_setup_clock, }; -- cgit v1.2.3 From cf690331642010a837c026088588761f61528ddf Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Fri, 12 Jul 2013 19:19:59 +0530 Subject: ARM: davinci: defconfig: enable EDMA driver Enable EDMA dmaengine driver by default in DaVinci defconfig files as it is required for DMA support on MMC/SD, SPI etc. Signed-off-by: Sekhar Nori --- arch/arm/configs/da8xx_omapl_defconfig | 2 ++ arch/arm/configs/davinci_all_defconfig | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 7c868139bdb0..1571bea48bed 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -102,6 +102,8 @@ CONFIG_SND_SOC=m CONFIG_SND_DAVINCI_SOC=m # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index c86fd75e181a..ab2f7378352c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m -- cgit v1.2.3 From 3715534adf899bfc842868865f13a001b8aa4692 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 14 Jul 2013 14:02:19 +0200 Subject: cpufreq: s3c24xx: fix "depends on ARM_S3C24XX" in Kconfig Kconfig symbol S3C24XX_PLL depends on ARM_S3C24XX. But that symbol doesn't exist. Commit f023f8dd59bf ("cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq"), which added this issue, makes it clear that ARM_S3C24XX_CPUFREQ was intended here. Signed-off-by: Paul Bolle Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-s3c24xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 6d9252e081ce..7791ac76f945 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -208,7 +208,7 @@ config S3C24XX_GPIO_EXTRA128 config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" - depends on ARM_S3C24XX + depends on ARM_S3C24XX_CPUFREQ help Compile in support for changing the PLL frequency from the S3C24XX series CPUfreq driver. The PLL takes time to settle -- cgit v1.2.3 From a39a9f7b6608c83b89ae404cc39e6607ccdccdde Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Tue, 18 Jun 2013 18:53:31 -0700 Subject: ARM: msm: dts: Fix the gpio register address for msm8960 Fix the the gpio reg address for the device tree entry. Signed-off-by: Rohit Vaswani Signed-off-by: David Brown --- arch/arm/boot/dts/msm8960-cdp.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c46540..9c1167b0459b 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { -- cgit v1.2.3 From 9af588736f48401cca6a39a96a59fb994068237f Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Mon, 27 May 2013 15:16:06 +0200 Subject: ARM: nomadik: Update MMC defconfigs Enable MMC_UNSAFE_RESUME to accomplish a proper suspend/resume cycle for SD/SDIO/(e)MMC. ARMMMCI host driver supports clock gating through runtime PM, thus MMC_CLKGATE is not needed. Moreover ARMMMCI can do scatter-gather which means we can explicity disable MMC_BLOCK_BOUNCE, since it's default enabled, to skip unnecessary bounce buffer copying. Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/configs/nhk8815_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index 35f8cf299fa2..b605575f3225 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -95,7 +95,8 @@ CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set CONFIG_MMC=y -CONFIG_MMC_CLKGATE=y +CONFIG_MMC_UNSAFE_RESUME=y +# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y -- cgit v1.2.3 From 931f57378631c19545ec933d2df0f4fb46d16659 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 28 May 2013 16:40:29 +0200 Subject: ARM: nomadik: update defconfig base Update the Nomadik defconfig enabling: - GPIO keyboard input - Regulators - LED class driver - LED heartbeat trigger Signed-off-by: Linus Walleij --- arch/arm/configs/nhk8815_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index b605575f3225..e4cb5a420424 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -48,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND=y @@ -94,6 +93,7 @@ CONFIG_I2C_GPIO=y CONFIG_I2C_NOMADIK=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_REGULATOR=y CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_BLOCK_BOUNCE is not set -- cgit v1.2.3 From fec57e15527ab2e3d22cfbf04f2b98f823f294ff Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Jun 2013 13:48:16 +0200 Subject: ARM: nomadik: configure for NO_HZ and HRTIMERS This enables tickless idle (NO_HZ_IDLE) and high resolution timers for the Nomadik. Signed-off-by: Linus Walleij --- arch/arm/configs/nhk8815_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index e4cb5a420424..263ae3869e32 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -1,6 +1,8 @@ # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -- cgit v1.2.3 From d58e9a02e1435744d80a99742d1135a6921318eb Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 4 Jul 2013 15:55:26 +0800 Subject: pinctrl: sirf: add usp0_uart_nostreamctrl pin group for usp-uart without flowctrl this patch adds the lost pin group which supports to let USP0 to simulate a UART without hardware flow control. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Linus Walleij --- arch/arm/boot/dts/atlas6.dtsi | 6 ++++++ drivers/pinctrl/sirf/pinctrl-atlas6.c | 20 ++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 9866cd736dee..537041253db7 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -485,6 +485,12 @@ sirf,function = "usp0"; }; }; + usp0_uart_nostreamctrl_pins_a: usp0@1 { + usp0 { + sirf,pins = "usp0_uart_nostreamctrl_grp"; + sirf,function = "usp0_uart_nostreamctrl"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; diff --git a/drivers/pinctrl/sirf/pinctrl-atlas6.c b/drivers/pinctrl/sirf/pinctrl-atlas6.c index c641be9c5b80..867c9681763c 100644 --- a/drivers/pinctrl/sirf/pinctrl-atlas6.c +++ b/drivers/pinctrl/sirf/pinctrl-atlas6.c @@ -509,6 +509,19 @@ static const struct sirfsoc_padmux usp0_padmux = { static const unsigned usp0_pins[] = { 51, 52, 53, 54, 55 }; +static const struct sirfsoc_muxmask usp0_uart_nostreamctrl_muxmask[] = { + { + .group = 1, + .mask = BIT(20) | BIT(21), + }, +}; + +static const struct sirfsoc_padmux usp0_uart_nostreamctrl_padmux = { + .muxmask_counts = ARRAY_SIZE(usp0_uart_nostreamctrl_muxmask), + .muxmask = usp0_uart_nostreamctrl_muxmask, +}; + +static const unsigned usp0_uart_nostreamctrl_pins[] = { 52, 53 }; static const struct sirfsoc_muxmask usp1_muxmask[] = { { .group = 0, @@ -822,6 +835,8 @@ static const struct sirfsoc_pin_group sirfsoc_pin_groups[] = { SIRFSOC_PIN_GROUP("uart2grp", uart2_pins), SIRFSOC_PIN_GROUP("uart2_nostreamctrlgrp", uart2_nostreamctrl_pins), SIRFSOC_PIN_GROUP("usp0grp", usp0_pins), + SIRFSOC_PIN_GROUP("usp0_uart_nostreamctrl_grp", + usp0_uart_nostreamctrl_pins), SIRFSOC_PIN_GROUP("usp1grp", usp1_pins), SIRFSOC_PIN_GROUP("i2c0grp", i2c0_pins), SIRFSOC_PIN_GROUP("i2c1grp", i2c1_pins), @@ -862,6 +877,8 @@ static const char * const uart0grp[] = { "uart0grp" }; static const char * const uart1grp[] = { "uart1grp" }; static const char * const uart2grp[] = { "uart2grp" }; static const char * const uart2_nostreamctrlgrp[] = { "uart2_nostreamctrlgrp" }; +static const char * const usp0_uart_nostreamctrl_grp[] = { + "usp0_uart_nostreamctrl_grp" }; static const char * const usp0grp[] = { "usp0grp" }; static const char * const usp1grp[] = { "usp1grp" }; static const char * const i2c0grp[] = { "i2c0grp" }; @@ -904,6 +921,9 @@ static const struct sirfsoc_pmx_func sirfsoc_pmx_functions[] = { SIRFSOC_PMX_FUNCTION("uart2", uart2grp, uart2_padmux), SIRFSOC_PMX_FUNCTION("uart2_nostreamctrl", uart2_nostreamctrlgrp, uart2_nostreamctrl_padmux), SIRFSOC_PMX_FUNCTION("usp0", usp0grp, usp0_padmux), + SIRFSOC_PMX_FUNCTION("usp0_uart_nostreamctrl", + usp0_uart_nostreamctrl_grp, + usp0_uart_nostreamctrl_padmux), SIRFSOC_PMX_FUNCTION("usp1", usp1grp, usp1_padmux), SIRFSOC_PMX_FUNCTION("i2c0", i2c0grp, i2c0_padmux), SIRFSOC_PMX_FUNCTION("i2c1", i2c1grp, i2c1_padmux), -- cgit v1.2.3 From c8078de853d51e9b86a2f025ee281b5a81c80655 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 4 Jul 2013 15:55:27 +0800 Subject: arm/dts: sirf: fix the pingroup name mismatch between drivers and dts in drivers/pinctrl/sirf, pingroup name is cko0 and cko1, but in dts, they are cko0 and cko1_rst. this patch fixes the error in dts. Signed-off-by: Barry Song Signed-off-by: Linus Walleij --- arch/arm/boot/dts/atlas6.dtsi | 16 ++++++++-------- arch/arm/boot/dts/prima2.dtsi | 16 ++++++++-------- 2 files changed, 16 insertions(+), 16 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 537041253db7..a0f2721ea583 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -521,16 +521,16 @@ sirf,function = "pulse_count"; }; }; - cko0_rst_pins_a: cko0_rst@0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; + cko0_pins_a: cko0@0 { + cko0 { + sirf,pins = "cko0grp"; + sirf,function = "cko0"; }; }; - cko1_rst_pins_a: cko1_rst@0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; + cko1_pins_a: cko1@0 { + cko1 { + sirf,pins = "cko1grp"; + sirf,function = "cko1"; }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 05e9489cf95c..bbeb623fc2c6 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -515,16 +515,16 @@ sirf,function = "pulse_count"; }; }; - cko0_rst_pins_a: cko0_rst@0 { - cko0_rst { - sirf,pins = "cko0_rstgrp"; - sirf,function = "cko0_rst"; + cko0_pins_a: cko0@0 { + cko0 { + sirf,pins = "cko0grp"; + sirf,function = "cko0"; }; }; - cko1_rst_pins_a: cko1_rst@0 { - cko1_rst { - sirf,pins = "cko1_rstgrp"; - sirf,function = "cko1_rst"; + cko1_pins_a: cko1@0 { + cko1 { + sirf,pins = "cko1grp"; + sirf,function = "cko1"; }; }; }; -- cgit v1.2.3 From b6992fa9a74862c5addb62cde1657c7479615d86 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 17 Jul 2013 17:54:27 +0100 Subject: ARM: document DEBUG_UNCOMPRESS Kconfig option This non-user visible option lacked any kind of documentation. This is quite common for non-user visible options; certian people can't understand the point of documenting such options with help text. However, here we have a case in point: developers don't understand the option either, as they were thinking that when the option is not set, the decompressor should produce no output what so ever. This is incorrect, as the purpose of this option is to control whether a multiplatform kernel uses the kernel debugging macros to produce output or not. So let's document this via help rather than commentry to prevent others falling into this misunderstanding. Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e401a766c0bd..583f4a00ec32 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE config DEBUG_UNCOMPRESS bool - default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ - !DEBUG_OMAP2PLUS_UART && \ + depends on ARCH_MULTIPLATFORM + default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ !DEBUG_TEGRA_UART + help + This option influences the normal decompressor output for + multiplatform kernels. Normally, multiplatform kernels disable + decompressor output because it is not possible to know where to + send the decompressor output. + + When this option is set, the selected DEBUG_LL output method + will be re-used for normal decompressor output on multiplatform + kernels. + config UNCOMPRESS_INCLUDE string -- cgit v1.2.3 From bf3f0f332f76a85ff3a0b393aaded5a8533769c0 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 15 Jul 2013 14:26:19 +0100 Subject: ARM: 7784/1: mm: ensure SMP alternates assemble to exactly 4 bytes with Thumb-2 Commit ae8a8b9553bd ("ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead") added early function returns for page table cache flushing operations on ARMv7 SMP CPUs. Unfortunately, when targetting Thumb-2, these `mov pc, lr' sequences assemble to 2 bytes which can lead to corruption of the instruction stream after code patching. This patch fixes the alternates to use wide (32-bit) instructions for Thumb-2, therefore ensuring that the patching code works correctly. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/proc-v7-2level.S | 2 +- arch/arm/mm/proc-v7-3level.S | 2 +- arch/arm/mm/proc-v7.S | 11 ++++++----- 3 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index f64afb9f1bd5..bdd3be4be77a 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - ALT_SMP(mov pc,lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index c36ac69488c8..01a719e18bb0 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - ALT_SMP(mov pc, lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 5c6d5a3050ea..73398bcf9bd8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) - ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW - ALT_UP(W(nop)) - dcache_line_size r2, r3 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + ALT_SMP(W(nop)) @ MP extensions imply L1 PTW + ALT_UP_B(1f) + mov pc, lr +1: dcache_line_size r2, r3 +2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 - bhi 1b + bhi 2b dsb mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) -- cgit v1.2.3 From c65b7e98b4edce7faf534154b28eae8fb579144b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 17 Jul 2013 17:53:04 +0100 Subject: ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 43 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f56617a2392..b3fdb63783e3 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { + phys_addr_t memblock_limit = 0; int i, j, highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; @@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void) bank->size = size_limit; } #endif - if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit) - arm_lowmem_limit = bank->start + bank->size; + if (!bank->highmem) { + phys_addr_t bank_end = bank->start + bank->size; + if (bank_end > arm_lowmem_limit) + arm_lowmem_limit = bank_end; + + /* + * Find the first non-section-aligned page, and point + * memblock_limit at it. This relies on rounding the + * limit down to be section-aligned, which happens at + * the end of this function. + * + * With this algorithm, the start or end of almost any + * bank can be non-section-aligned. The only exception + * is that the start of the bank 0 must be section- + * aligned, since otherwise memory would need to be + * allocated when mapping the start of bank 0, which + * occurs before any free memory is mapped. + */ + if (!memblock_limit) { + if (!IS_ALIGNED(bank->start, SECTION_SIZE)) + memblock_limit = bank->start; + else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) + memblock_limit = bank_end; + } + } j++; } #ifdef CONFIG_HIGHMEM @@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void) #endif meminfo.nr_banks = j; high_memory = __va(arm_lowmem_limit - 1) + 1; - memblock_set_current_limit(arm_lowmem_limit); + + /* + * Round the memblock limit down to a section size. This + * helps to ensure that we will allocate memory from the + * last full section, which should be mapped. + */ + if (memblock_limit) + memblock_limit = round_down(memblock_limit, SECTION_SIZE); + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + + memblock_set_current_limit(memblock_limit); } static inline void prepare_page_table(void) @@ -1276,8 +1311,6 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; - memblock_set_current_limit(arm_lowmem_limit); - build_mem_type_table(); prepare_page_table(); map_lowmem(); -- cgit v1.2.3 From b60d5db690f72a7cfe5e39f191f0719a9ef3a096 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 18 Jul 2013 17:20:32 +0100 Subject: ARM: 7786/1: hyp: fix macro parameterisation Currently, compare_cpu_mode_with_primary uses a mixture of macro arguments and hardcoded registers, and does so incorrectly, as it stores (__boot_cpu_mode_offset | BOOT_CPU_MODE_MISMATCH) to (__boot_cpu_mode + &__boot_cpu_mode_offset), which could corrupt an arbitrary portion of memory. This patch fixes up compare_cpu_mode_with_primary to use the macro arguments, correctly updating __boot_cpu_mode. Signed-off-by: Mark Rutland Acked-by: Dave Martin Acked-by: Marc Zyngier Cc: Christoffer Dall Signed-off-by: Russell King --- arch/arm/kernel/hyp-stub.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 4910232c4833..797b1a6a4906 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode) ldr \reg3, [\reg2] ldr \reg1, [\reg2, \reg3] cmp \mode, \reg1 @ matches primary CPU boot mode? - orrne r7, r7, #BOOT_CPU_MODE_MISMATCH - strne r7, [r5, r6] @ record what happened and give up + orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH + strne \reg1, [\reg2, \reg3] @ record what happened and give up .endm #else /* ZIMAGE */ -- cgit v1.2.3 From ab8d46c0609843a83aef3f486365ca5e7c21d537 Mon Sep 17 00:00:00 2001 From: Tetsuyuki Kobayashi Date: Mon, 22 Jul 2013 14:58:17 +0100 Subject: ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo Commit a469abd0f868 ("ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions") added a new hwcap to identify LPAE on CPUs which support it. Whilst the hwcap data is correct, the string reported in /proc/cpuinfo actually matches on HWCAP_VFPD32, which was missing an entry in the string table. This patch fixes this problem by adding a "vfpd32" string at the correct offset, preventing us from falsely advertising LPAE on CPUs which do not support it. [will: added commit message] Acked-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 63af9a7ae512..96286cb383bd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -971,6 +971,7 @@ static const char *hwcap_str[] = { "vfpv4", "idiva", "idivt", + "vfpd32", "lpae", NULL }; -- cgit v1.2.3 From 334ab91d5818256befbf083755d0bb9e7dbd2325 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 9 Jul 2013 08:26:24 +0100 Subject: ARM: dts: STi: Fix pinconf setup for STiH416 serial2 This patch fixes a bug in pinctrl setup of serial2 device, Some of the pins in the pinctrl node of serial2 do not belong to that pin-controller. This patch divides them in the pins into there respective pin controller nodes. Without this patch serial on StiH416-B2000 Board will not work as it fails with: "st-pinctrl pin-controller-rear.3: failed to get pin(99) name st-pinctrl pin-controller-rear.3: maps: function serial2 group serial2-0 num 4 pinconfig core: failed to register map default (3): no group/pin given" Signed-off-by: Srinivas Kandagatla Signed-off-by: Olof Johansson --- arch/arm/boot/dts/stih416-pinctrl.dtsi | 10 +++++++++- arch/arm/boot/dts/stih416.dtsi | 2 +- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 957b21a71b4b..0f246c979262 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -166,6 +166,15 @@ reg = <0x9000 0x100>; st,bank-name = "PIO31"; }; + + serial2-oe { + pinctrl_serial2_oe: serial2-1 { + st,pins { + output-enable = <&PIO11 3 ALT2 OUT>; + }; + }; + }; + }; pin-controller-rear { @@ -218,7 +227,6 @@ st,pins { tx = <&PIO17 4 ALT2 OUT>; rx = <&PIO17 5 ALT2 IN>; - output-enable = <&PIO11 3 ALT2 OUT>; }; }; }; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 3cecd9689a49..1a0326ea7d07 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -79,7 +79,7 @@ interrupts = <0 197 0>; clocks = <&CLK_S_ICN_REG_0>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2>; + pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; /* SBC_UART1 */ -- cgit v1.2.3 From c9250073cdd54339a320b78719761d3ea33714fe Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 9 Jul 2013 08:26:33 +0100 Subject: ARM: STi: Set correct ARM ERRATAs. Some of the ARM_ERRATA selection is not done in the initial SOC support patches. This patch selects 2 new ARM_ERRATA's and removes one which was actually fixed. Signed-off-by: Srinivas Kandagatla [olof: reorder new errata entries] Signed-off-by: Olof Johansson --- arch/arm/mach-sti/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index d04e3bfe1918..835833e3c4f8 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -11,8 +11,9 @@ menuconfig ARCH_STI select HAVE_SMP select HAVE_ARM_SCU if SMP select ARCH_REQUIRE_GPIOLIB - select ARM_ERRATA_720789 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 + select ARM_ERRATA_775420 select PL310_ERRATA_753970 if CACHE_PL310 select PL310_ERRATA_769419 if CACHE_PL310 help -- cgit v1.2.3 From 6287e7319870ec949fb809e4eb4154c2b05b221f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 27 Jun 2013 22:42:36 -0400 Subject: ARM: footbridge: fix overlapping PCI mappings Commit 8ef6e6201b26cb9fde79c1baa08145af6aca2815 (ARM: footbridge: use fixed PCI i/o mapping) broke booting on my netwinder. Before that, everything boots fine. Since then, it crashes on boot. With earlyprintk, I see it BUG-ing like so: kernel BUG at lib/ioremap.c:27! Internal error: Oops - BUG: 0 [#1] ARM ... [] (ioremap_page_range+0x128/0x154) from [] (dc21285_setup+0xd0/0x114) [] (dc21285_setup+0xd0/0x114) from [] (pci_common_init+0xa0/0x298) [] (pci_common_init+0xa0/0x298) from [] (netwinder_pci_init+0xc/0x18) [] (netwinder_pci_init+0xc/0x18) from [] (do_one_initcall+0xb4/0x180) ... Russell points out it's because of overlapping PCI mappings that was added with the aforementioned commit. Rob thought the code would re-use the static mapping, but that turns out to not be the case and instead hits the BUG further down. After deleting this hunk as suggested by Russel, the system boots up fine again and all my PCI devices work (IDE, ethernet, the DC21285). Signed-off-by: Mike Frysinger Acked-by: Rob Herring Cc: stable@vger.kernel.org # v3.5+ Signed-off-by: Olof Johansson --- arch/arm/mach-footbridge/dc21285.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index a7cd2cf5e08d..3490a24f969e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_ioremap_io(0, DC21285_PCI_IO); - pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); -- cgit v1.2.3 From e64bf95e68bf92e7f6d906da4715b937cec5646c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 21 Jul 2013 14:53:37 -0500 Subject: ARM: highbank: Only touch common coherency control register fields Midway adds new register fields to the coherency control registers, so writing absolute values will break on Midway. Change the register accesses to only modify the necessary and common fields in order to support both Midway and Highbank. Signed-off-by: Rob Herring Signed-off-by: Olof Johansson --- arch/arm/mach-highbank/highbank.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index dc5d6becd8c7..88815795fe26 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb, { struct resource *res; int reg = -1; + u32 val; struct device *dev = __dev; if (event != BUS_NOTIFY_ADD_DEVICE) @@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb, return NOTIFY_DONE; if (of_property_read_bool(dev->of_node, "dma-coherent")) { - writel(0xff31, sregs_base + reg); + val = readl(sregs_base + reg); + writel(val | 0xff01, sregs_base + reg); set_dma_ops(dev, &arm_coherent_dma_ops); - } else - writel(0, sregs_base + reg); + } return NOTIFY_OK; } -- cgit v1.2.3 From 2451ade070ef9b0a0f118ac41896da856e72b5a1 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Sun, 21 Jul 2013 15:17:54 +0000 Subject: xen/arm,arm64: update xen_restart after ff701306cd49 and 7b6d864b48d9 Commit 7b6d864b48d9 (reboot: arm: change reboot_mode to use enum reboot_mode) and ff701306cd49 (arm64: use common reboot infrastructure) change the prototype of arm_pm_restart on arm and arm64. Update xen_restart accordingly. Signed-off-by: Stefano Stabellini --- arch/arm/xen/enlighten.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index f71c37edca26..c9770ba5c7df 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -172,7 +172,7 @@ static void __init xen_percpu_init(void *unused) enable_percpu_irq(xen_events_irq, 0); } -static void xen_restart(char str, const char *cmd) +static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) { struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; int rc; -- cgit v1.2.3 From ed882c3e72d6037589baa4328585c2b0450e673c Mon Sep 17 00:00:00 2001 From: Vincent Stehlé Date: Thu, 27 Jun 2013 14:49:27 +0200 Subject: ARM: keystone: fix compilation warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warning: arch/arm/mach-keystone/keystone.c:74:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-keystone/keystone.c:74:2: warning: (near initialization for ‘__mach_desc_KEYSTONE.restart’) [enabled by default] Signed-off-by: Vincent Stehlé Cc: Robin Holt Cc: Russell King Cc: trivial@kernel.org Signed-off-by: Olof Johansson --- arch/arm/mach-keystone/keystone.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index fe4d9ff93a7e..b661c5c2870a 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = { NULL, }; -void keystone_restart(char mode, const char *cmd) +void keystone_restart(enum reboot_mode mode, const char *cmd) { u32 val; -- cgit v1.2.3 From fe08bf9f46d6ae8e08de32d29234a2c928eebf8f Mon Sep 17 00:00:00 2001 From: Vincent Stehlé Date: Thu, 27 Jun 2013 14:42:41 +0200 Subject: ARM: zynq: fix compilation warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warning: arch/arm/mach-zynq/common.c:110:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-zynq/common.c:110:2: warning: (near initialization for ‘__mach_desc_XILINX_EP107.restart’) [enabled by default] Signed-off-by: Vincent Stehlé Cc: Robin Holt Cc: Michal Simek Cc: Russell King Cc: trivial@kernel.org Signed-off-by: Olof Johansson --- arch/arm/mach-zynq/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 5b799c29886e..5f252569c689 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -91,7 +91,7 @@ static void __init zynq_map_io(void) zynq_scu_map_io(); } -static void zynq_system_reset(char mode, const char *cmd) +static void zynq_system_reset(enum reboot_mode mode, const char *cmd) { zynq_slcr_system_reset(); } -- cgit v1.2.3 From a829abf8daa2dcf8223a9284b76d221e61130e13 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 5 Jul 2013 17:51:20 +0200 Subject: ARM: pxa: propagate errors from regulator_enable() to pxamci The em_x270_mci_setpower() and em_x270_usb_hub_init() functions call regulator_enable(), which may return an error that must be checked. This changes the em_x270_usb_hub_init() function to bail out if it fails, and changes the pxamci_platform_data->setpower callback so that the a failed em_x270_mci_setpower call can be propagated by the pxamci driver into the mmc core. Signed-off-by: Arnd Bergmann Cc: Mike Rapoport Cc: Paul Gortmaker Cc: Mark Brown Cc: Haojian Zhuang Acked-by: Chris Ball [olof: fixed order of regulator_enable() and test in em_x270_usb_hub_init] Signed-off-by: Olof Johansson --- arch/arm/mach-pxa/em-x270.c | 17 +++++++++++++---- arch/arm/mach-pxa/mainstone.c | 3 ++- arch/arm/mach-pxa/pcm990-baseboard.c | 3 ++- arch/arm/mach-pxa/poodle.c | 4 +++- arch/arm/mach-pxa/spitz.c | 4 +++- arch/arm/mach-pxa/stargate2.c | 3 ++- drivers/mmc/host/pxamci.c | 2 +- include/linux/platform_data/mmc-pxamci.h | 2 +- 8 files changed, 27 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f6726bb4eb95..3a3362fa793e 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void) /* USB Hub power-on and reset */ gpio_direction_output(usb_hub_reset, 1); gpio_direction_output(GPIO9_USB_VBUS_EN, 0); - regulator_enable(em_x270_usb_ldo); + err = regulator_enable(em_x270_usb_ldo); + if (err) + goto err_free_rst_gpio; + gpio_set_value(usb_hub_reset, 0); gpio_set_value(usb_hub_reset, 1); regulator_disable(em_x270_usb_ldo); - regulator_enable(em_x270_usb_ldo); + err = regulator_enable(em_x270_usb_ldo); + if (err) + goto err_free_rst_gpio; + gpio_set_value(usb_hub_reset, 0); gpio_set_value(GPIO9_USB_VBUS_EN, 1); return 0; +err_free_rst_gpio: + gpio_free(usb_hub_reset); err_free_vbus_gpio: gpio_free(GPIO9_USB_VBUS_EN); err_free_usb_ldo: @@ -592,7 +600,7 @@ err_irq: return err; } -static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) +static int em_x270_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000; regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV); - regulator_enable(em_x270_sdio_ldo); + return regulator_enable(em_x270_sdio_ldo); } else { regulator_disable(em_x270_sdio_ldo); } + return 0; } static void em_x270_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d2c652318376..dd70343c8708 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in return err; } -static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) +static int mainstone_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd) printk(KERN_DEBUG "%s: off\n", __func__); MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON; } + return 0; } static void mainstone_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index fb7f1d1627dc..13e5b00eae90 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int, return err; } -static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) +static int pcm990_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data *p_d = dev->platform_data; u8 val; @@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd) val &= ~PCM990_CTRL_MMC2PWR; pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5); + return 0; } static void pcm990_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 711d37e26bd8..aedf053a1de5 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -258,7 +258,7 @@ err_free_2: return err; } -static void poodle_mci_setpower(struct device *dev, unsigned int vdd) +static int poodle_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd) gpio_set_value(POODLE_GPIO_SD_PWR1, 0); gpio_set_value(POODLE_GPIO_SD_PWR, 0); } + + return 0; } static void poodle_mci_exit(struct device *dev, void *data) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 2125df0444e7..4c29173026e8 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {} * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to * give the card a chance to fully insert/eject. */ -static void spitz_mci_setpower(struct device *dev, unsigned int vdd) +static int spitz_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; @@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd) spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V); else spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0); + + return 0; } static struct pxamci_platform_data spitz_mci_platform_data = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 88fde43c948c..62aea3e835f3 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev, * * Very simple control. Either it is on or off and is controlled by * a gpio pin */ -static void stargate2_mci_setpower(struct device *dev, unsigned int vdd) +static int stargate2_mci_setpower(struct device *dev, unsigned int vdd) { gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd); + return 0; } static void stargate2_mci_exit(struct device *dev, void *data) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 847b1996ce8e..2c5a91bb8ec3 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -128,7 +128,7 @@ static inline int pxamci_set_power(struct pxamci_host *host, !!on ^ host->pdata->gpio_power_invert); } if (!host->vcc && host->pdata && host->pdata->setpower) - host->pdata->setpower(mmc_dev(host->mmc), vdd); + return host->pdata->setpower(mmc_dev(host->mmc), vdd); return 0; } diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h index 9eb515bb799d..1706b3597ce0 100644 --- a/include/linux/platform_data/mmc-pxamci.h +++ b/include/linux/platform_data/mmc-pxamci.h @@ -12,7 +12,7 @@ struct pxamci_platform_data { unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ int (*init)(struct device *, irq_handler_t , void *); int (*get_ro)(struct device *); - void (*setpower)(struct device *, unsigned int); + int (*setpower)(struct device *, unsigned int); void (*exit)(struct device *, void *); int gpio_card_detect; /* gpio detecting card insertion */ int gpio_card_ro; /* gpio detecting read only toggle */ -- cgit v1.2.3 From a520a9b7edc940fc735c526470313cf963fc72da Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 Jul 2013 14:02:06 -0300 Subject: ARM: multi_v7_defconfig: Select USB chipidea driver CONFIG_USB_EHCI_MXC selects the old i.mx USB driver, which does not support device tree. Select the USB chipidea driver instead, so that USB can be functional on i.mx. Signed-off-by: Fabio Estevam Signed-off-by: Olof Johansson --- arch/arm/configs/multi_v7_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 120b08edb9a9..6e572c64cf5a 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -114,11 +114,12 @@ CONFIG_FB_SIMPLE=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y CONFIG_AB8500_USB=y CONFIG_NOP_USB_XCEIV=y CONFIG_OMAP_USB2=y -- cgit v1.2.3 From d817468c4b2892b9468e2a0c92116e38a3a61370 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 24 Jul 2013 13:23:51 +0900 Subject: ARM: S3C24XX: Add missing clkdev entries for s3c2440 UART This patch restores serial port operation which has been broken since commit 60e93575476f ("serial: samsung: enable clock before clearing pending interrupts during init") That commit only uncovered the real issue which was missing clkdev entries for the "uart" clocks on S3C2440. It went unnoticed so far because return value of clk API calls were not being checked at all in the samsung serial port driver. This patch should be backported to at least 3.10 stable kernel, since the serial port has not been working on s3c2440 since 3.10-rc5. Cc: Chander Kashyap Signed-off-by: Sylwester Nawrocki [on S3C2440 SoC based Mini2440 board] Tested-by: Sylwester Nawrocki Reviewed-by: Tomasz Figa Tested-by: Juergen Beisert Cc: [3.10] Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/clock-s3c2410.c | 161 ++++++++++++++++++----------- arch/arm/mach-s3c24xx/clock-s3c2440.c | 3 + arch/arm/plat-samsung/include/plat/clock.h | 5 + 3 files changed, 106 insertions(+), 63 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c index 34fffdf6fc1d..564553694b54 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c @@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = { } }; -static struct clk init_clocks[] = { - { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - }, +static struct clk clk_lcd = { + .name = "lcd", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_LCDC, +}; + +static struct clk clk_gpio = { + .name = "gpio", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_GPIO, +}; + +static struct clk clk_usb_host = { + .name = "usb-host", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBH, +}; + +static struct clk clk_usb_device = { + .name = "usb-device", + .parent = &clk_h, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_USBD, +}; + +static struct clk clk_timers = { + .name = "timers", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_PWMT, +}; + +struct clk s3c24xx_clk_uart0 = { + .name = "uart", + .devname = "s3c2410-uart.0", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART0, +}; + +struct clk s3c24xx_clk_uart1 = { + .name = "uart", + .devname = "s3c2410-uart.1", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART1, +}; + +struct clk s3c24xx_clk_uart2 = { + .name = "uart", + .devname = "s3c2410-uart.2", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_UART2, +}; + +static struct clk clk_rtc = { + .name = "rtc", + .parent = &clk_p, + .enable = s3c2410_clkcon_enable, + .ctrlbit = S3C2410_CLKCON_RTC, +}; + +static struct clk clk_watchdog = { + .name = "watchdog", + .parent = &clk_p, + .ctrlbit = 0, +}; + +static struct clk clk_usb_bus_host = { + .name = "usb-bus-host", + .parent = &clk_usb_bus, +}; + +static struct clk clk_usb_bus_gadget = { + .name = "usb-bus-gadget", + .parent = &clk_usb_bus, +}; + +static struct clk *init_clocks[] = { + &clk_lcd, + &clk_gpio, + &clk_usb_host, + &clk_usb_device, + &clk_timers, + &s3c24xx_clk_uart0, + &s3c24xx_clk_uart1, + &s3c24xx_clk_uart2, + &clk_rtc, + &clk_watchdog, + &clk_usb_bus_host, + &clk_usb_bus_gadget, }; /* s3c2410_baseclk_add() @@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void) { unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *clkp; struct clk *xtal; int ret; int ptr; @@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void) /* register clocks from clock array */ - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { + struct clk *clkp = init_clocks[ptr]; + /* ensure that we note the clock state */ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 1069b5680826..aaf006d1d6dc 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), + CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), + CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), + CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), }; diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index a62753dc15ba..df45d6edc98d 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -83,6 +83,11 @@ extern struct clk clk_ext; extern struct clksrc_clk clk_epllref; extern struct clksrc_clk clk_esysclk; +/* S3C24XX UART clocks */ +extern struct clk s3c24xx_clk_uart0; +extern struct clk s3c24xx_clk_uart1; +extern struct clk s3c24xx_clk_uart2; + /* S3C64XX specific clocks */ extern struct clk clk_h2; extern struct clk clk_27m; -- cgit v1.2.3 From 89693016e372983d720c186c0d00b29414b58804 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Wed, 24 Jul 2013 14:06:13 +0900 Subject: ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm This patch enables the selection of samsung pm related stuffs when SAMSUNG_PM config is enabled and not just when generic PM config is enabled. Power management for s3c64XX and s3c24XX is enabled by default and for other platform depends on S5P_PM. This patch also fixes the following compilation error's when compiling a platform like exynos5440 which does not select pm stuffs. arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys': linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq': linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq': linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake': linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter': linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core' linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint' linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core' make: *** [vmlinux] Error 1 Signed-off-by: Amit Daniel Kachhap Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Makefile | 2 +- arch/arm/mach-exynos/common.h | 1 - arch/arm/mach-exynos/cpuidle.c | 1 + arch/arm/plat-samsung/Kconfig | 7 +++++++ arch/arm/plat-samsung/Makefile | 2 +- arch/arm/plat-samsung/include/plat/pm.h | 8 ++++---- 6 files changed, 14 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index e970a7a4e278..53696154aead 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_ARCH_EXYNOS) += common.o -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S5P_PM) += pm.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 3e156bcddcb4..972490fc09d6 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -97,6 +97,5 @@ struct exynos_pmu_conf { }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); -extern void s3c_cpu_resume(void); #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c index 17a18ff3d71e..225ee8431c72 100644 --- a/arch/arm/mach-exynos/cpuidle.c +++ b/arch/arm/mach-exynos/cpuidle.c @@ -25,6 +25,7 @@ #include #include +#include #include "common.h" diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 3dc5cbea86cc..a5b5ff6e68d2 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -29,6 +29,13 @@ config PLAT_S5P help Base platform code for Samsung's S5P series SoC. +config SAMSUNG_PM + bool + depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM) + default y + help + Base platform power management code for samsung code + if PLAT_SAMSUNG # boot configurations diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 98d07d8fc7a7..199bbe304d02 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support -obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_SAMSUNG_PM) += pm.o obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 5d47ca35cabd..6bc1a8f471e3 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -19,7 +19,7 @@ struct device; -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern __init int s3c_pm_init(void); extern __init int s3c64xx_pm_init(void); @@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern void s3c_cpu_resume(void); - extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ @@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); -#ifdef CONFIG_PM +#ifdef CONFIG_SAMSUNG_PM extern int s3c_irq_wake(struct irq_data *data, unsigned int state); extern int s3c_irqext_wake(struct irq_data *data, unsigned int state); +extern void s3c_cpu_resume(void); #else #define s3c_irq_wake NULL #define s3c_irqext_wake NULL +#define s3c_cpu_resume NULL #endif /* PM debug functions */ -- cgit v1.2.3 From 7bdc84fb82627f34d9e13c37926f70fcde38e4c4 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Wed, 24 Jul 2013 17:05:07 +0900 Subject: ARM: SAMSUNG: Save/restore only selected uart's registers Basically this code gets executed only during debugging i.e when DEBUG_LL & SAMSUNG_PM_DEBUG is on, so required only for UART used for debugging. Since we are removing static iodesc entries for UARTs, so now only the selected (CONFIG_DEBUG_S3C_UART) UART will be ioremapped by the debug_ll_io_init() for DEBUG_LL, so save/restore uart registers only for selected uart. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/pm.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ea3613642451..d0c23010b693 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -80,7 +80,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { @@ -101,11 +101,7 @@ static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_save_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_save_uart(uart, save); + s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) @@ -126,11 +122,7 @@ static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) static void s3c_pm_restore_uarts(void) { - struct pm_uart_save *save = uart_save; - unsigned int uart; - - for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) - s3c_pm_restore_uart(uart, save); + s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save); } #else static void s3c_pm_save_uarts(void) { } -- cgit v1.2.3 From 7ed76e089a645a12c53bc35936574f710aa11549 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Wed, 24 Jul 2013 17:05:32 +0900 Subject: ARM: EXYNOS: Fix low level debug support Presently, using exynos_defconfig with CONFIG_DEBUG_LL and CONFIG_EARLY_PRIN on, kernel is not booting, we are getting following: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at mm/vmalloc.c:1134! [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc1 #633 [ 0.000000] task: c052ec48 ti: c0524000 task.ti: c0524000 [ 0.000000] PC is at vm_area_add_early+0x54/0x94 [ 0.000000] LR is at add_static_vm_early+0xc/0x60 Its because exynos[4/5]_map_io() function ioremaps a single 512KB memory size for all the four uart ports which envelopes the mapping created by debug_ll_io_init(), called earlier in exynos_init_io(). This patch removes iodesc entries for UART controller for all Samsung SoC's, since now the Samsung uart driver does a ioremap during probe and any needed iomapping for earlyprintk will be handled by debug_ll_io_init(). Tested on smdk4412 and smdk5250. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 164685bd25c8..ba95e5db2501 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); static void exynos5_map_io(void); -static void exynos5440_map_io(void); static int exynos_init(void); static struct cpu_table cpu_ids[] __initdata = { @@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = { }, { .idcode = EXYNOS5440_SOC_ID, .idmask = EXYNOS5_SOC_MASK, - .map_io = exynos5440_map_io, .init = exynos_init, .name = name_exynos5440, }, @@ -149,11 +147,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), .length = SZ_64K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS4_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), @@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS5_PA_PMU), .length = SZ_64K, .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS5_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5440_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(EXYNOS5440_PA_UART0), - .length = SZ_512K, - .type = MT_DEVICE, }, }; @@ -388,11 +367,6 @@ static void __init exynos5_map_io(void) iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } -static void __init exynos5440_map_io(void) -{ - iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); -} - void __init exynos_init_time(void) { of_clk_init(NULL); -- cgit v1.2.3 From 53302bf60d2c95ee42118008499a5f5de544fcc1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 24 Jul 2013 18:55:27 +0900 Subject: ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos With the recent cleanup in Exynos platform code notably commits 17859bec ("ARM: EXYNOS: Do not select legacy Kconfig symbols any more") and b9222210 ("ARM: EXYNOS: Remove mach/gpio.h"), the definition of ARCH_NR_GPIOS got removed. This started causing problems on SoCs like Exynos4412 which have more than the default number of GPIOs. Thus define this number in KConfig file which takes care of current SoC requirements and provides scope for GPIO expanders. Without this patch we get the following errors during boot: gpiochip_add: gpios 251..258 (gpv0) failed to register samsung-pinctrl 106e0000.pinctrl: failed to register gpio_chip gpv0, error code: -22 samsung-pinctrl: probe of 106e0000.pinctrl failed with error -22 Signed-off-by: Sachin Kamat Cc: Tomasz Figa Signed-off-by: Kukjin Kim --- arch/arm/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba412e02ec0c..37c0f4e978d4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1600,8 +1600,7 @@ config LOCAL_TIMERS config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if SOC_OMAP5 - default 512 if ARCH_KEYSTONE + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 default 392 if ARCH_U8500 default 352 if ARCH_VT8500 default 288 if ARCH_SUNXI -- cgit v1.2.3 From f82a3133c0c5625d54f3dd1621815b1cf77c8463 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 24 Jul 2013 16:55:23 -0700 Subject: ARM: omap5: Only select errata 798181 if SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoids the following warning when SMP is off: warning: (ARCH_KEYSTONE && SOC_OMAP5) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP) Reported-by: Emilio López Cc: Tony Lindgren Cc: Santosh Shilimkar Signed-off-by: Olof Johansson --- arch/arm/mach-omap2/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 627fa7e41fba..3eed0006d189 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config SOC_OMAP5 select HAVE_SMP select COMMON_CLK select HAVE_ARM_ARCH_TIMER - select ARM_ERRATA_798181 + select ARM_ERRATA_798181 if SMP config SOC_AM33XX bool "AM33XX support" -- cgit v1.2.3 From 16b551dd22cc7edacb952f7a2e175f36c3aa4bdb Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 24 Jul 2013 17:50:50 -0700 Subject: ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code 89ae7b5bbd3e65bc6ab7a577ca5ec18569589c8c (ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTC) mistakenly requests GPIO 166 in board code, most probably due to a wrong merge conflict resolution. As the GPIO is passed to the st1232 driver through platform data and requested by the driver, there's no need to request it in board code. Fix it. Tested by: Cao Minh Hiep Acked-by: Laurent Pinchart Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..c5be60d85e4b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ -- cgit v1.2.3 From 8fbac214e5c594a0c2fe78c14adf2cdbb1febc92 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 18 Jul 2013 17:20:33 +0100 Subject: ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode Secondary CPUs write to __boot_cpu_mode with caches disabled, and thus a cached value of __boot_cpu_mode may be incoherent with that in memory. This could lead to a failure to detect mismatched boot modes. This patch adds flushing to ensure that writes by secondaries to __boot_cpu_mode are made visible before we test against it. Signed-off-by: Mark Rutland Acked-by: Dave Martin Acked-by: Marc Zyngier Cc: Christoffer Dall Signed-off-by: Russell King --- arch/arm/include/asm/virt.h | 12 ++++++++++++ arch/arm/kernel/setup.c | 2 ++ 2 files changed, 14 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 50af92bac737..4371f45c5784 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -29,6 +29,7 @@ #define BOOT_CPU_MODE_MISMATCH PSR_N_BIT #ifndef __ASSEMBLY__ +#include #ifdef CONFIG_ARM_VIRT_EXT /* @@ -41,10 +42,21 @@ */ extern int __boot_cpu_mode; +static inline void sync_boot_mode(void) +{ + /* + * As secondaries write to __boot_cpu_mode with caches disabled, we + * must flush the corresponding cache entries to ensure the visibility + * of their writes. + */ + sync_cache_r(&__boot_cpu_mode); +} + void __hyp_set_vectors(unsigned long phys_vector_base); unsigned long __hyp_get_vectors(void); #else #define __boot_cpu_mode (SVC_MODE) +#define sync_boot_mode() #endif #ifndef ZIMAGE diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 96286cb383bd..afc2489ee13b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b) void __init hyp_mode_check(void) { #ifdef CONFIG_ARM_VIRT_EXT + sync_boot_mode(); + if (is_hyp_mode_available()) { pr_info("CPU: All CPU(s) started in HYP mode.\n"); pr_info("CPU: Virtualization extensions available.\n"); -- cgit v1.2.3 From 1f49856bb029779d8f1b63517a3a3b34ffe672c7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 Jul 2013 15:13:06 +0100 Subject: ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15 Commit 93dc688 (ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)) causes the following undefined instruction error on a mx53 (Cortex-A8): Internal error: Oops - undefined instruction: 0 [#1] SMP ARM CPU: 0 PID: 275 Comm: modprobe Not tainted 3.11.0-rc2-next-20130722-00009-g9b0f371 #881 task: df46cc00 ti: df48e000 task.ti: df48e000 PC is at check_and_switch_context+0x17c/0x4d0 LR is at check_and_switch_context+0xdc/0x4d0 This problem happens because check_and_switch_context() calls dummy_flush_tlb_a15_erratum() without checking if we are really running on a Cortex-A15 or not. To avoid this issue, only call dummy_flush_tlb_a15_erratum() inside check_and_switch_context() if erratum_a15_798181() returns true, which means that we are really running on a Cortex-A15. Signed-off-by: Fabio Estevam Acked-by: Catalin Marinas Reviewed-by: Roger Quadros Signed-off-by: Russell King --- arch/arm/include/asm/tlbflush.h | 16 ++++++++++++++++ arch/arm/kernel/smp_tlb.c | 17 ----------------- arch/arm/mm/context.c | 3 ++- 3 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index fdbb9e369745..f467e9b3f8d5 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void) isb(); } +#include #ifdef CONFIG_ARM_ERRATA_798181 +static inline int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} + static inline void dummy_flush_tlb_a15_erratum(void) { /* @@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void) dsb(); } #else +static inline int erratum_a15_798181(void) +{ + return 0; +} + static inline void dummy_flush_tlb_a15_erratum(void) { } diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index a98b62dca2fa..c2edfff573c2 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } -#ifdef CONFIG_ARM_ERRATA_798181 -static int erratum_a15_798181(void) -{ - unsigned int midr = read_cpuid_id(); - - /* Cortex-A15 r0p0..r3p2 affected */ - if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) - return 0; - return 1; -} -#else -static int erratum_a15_798181(void) -{ - return 0; -} -#endif - static void ipi_flush_tlb_a15_erratum(void *arg) { dmb(); diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b55b1015724b..4a0544492f10 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); - dummy_flush_tlb_a15_erratum(); + if (erratum_a15_798181()) + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); -- cgit v1.2.3 From bdae73cd374e28db544fdd9b77de689a36e3c129 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 23 Jul 2013 16:15:36 +0100 Subject: ARM: 7790/1: Fix deferred mm switch on VIVT processors As of commit b9d4d42ad9 (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the finish_arch_post_lock_switch() function to avoid whole cache flushing with interrupts disabled. The need for deferred mm switch is stored as a thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can have another thread switch before finish_arch_post_lock_switch(). If the new thread has the same mm as the previous 'next' thread, the scheduler will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for the new thread. This patch moves the switch pending flag to the mm_context_t structure since this is specific to the mm rather than thread. Signed-off-by: Catalin Marinas Reported-by: Marc Kleine-Budde Tested-by: Marc Kleine-Budde Cc: # 3.5+ Signed-off-by: Russell King --- arch/arm/include/asm/mmu.h | 2 ++ arch/arm/include/asm/mmu_context.h | 20 ++++++++++++++++---- arch/arm/include/asm/thread_info.h | 1 - 3 files changed, 18 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index e3d55547e755..d1b4998e4f43 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -6,6 +6,8 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID atomic64_t id; +#else + int switch_pending; #endif unsigned int vmalloc_seq; } mm_context_t; diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index b5792b7fd8d3..9b32f76bb0dd 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm, * on non-ASID CPUs, the old mm will remain valid until the * finish_arch_post_lock_switch() call. */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); + mm->context.switch_pending = 1; else cpu_switch_mm(mm->pgd, mm); } @@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm, finish_arch_post_lock_switch static inline void finish_arch_post_lock_switch(void) { - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) { - struct mm_struct *mm = current->mm; - cpu_switch_mm(mm->pgd, mm); + struct mm_struct *mm = current->mm; + + if (mm && mm->context.switch_pending) { + /* + * Preemption must be disabled during cpu_switch_mm() as we + * have some stateful cache flush implementations. Check + * switch_pending again in case we were preempted and the + * switch to this mm was already done. + */ + preempt_disable(); + if (mm->context.switch_pending) { + mm->context.switch_pending = 0; + cpu_switch_mm(mm->pgd, mm); + } + preempt_enable_no_resched(); } } diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 214d4158089a..2b8114fcba09 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -- cgit v1.2.3 From acfdd4b1f7590d02e9bae3b73bdbbc4a31b05d38 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 25 Jul 2013 11:44:48 +0100 Subject: ARM: 7791/1: a.out: remove partial a.out support a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Cc: Cc: Ashish Sangwan Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - arch/arm/include/asm/a.out-core.h | 45 --------------------------------------- arch/arm/include/asm/processor.h | 4 ---- arch/arm/include/uapi/asm/Kbuild | 1 - arch/arm/include/uapi/asm/a.out.h | 34 ----------------------------- 5 files changed, 85 deletions(-) delete mode 100644 arch/arm/include/asm/a.out-core.h delete mode 100644 arch/arm/include/uapi/asm/a.out.h (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba412e02ec0c..82f069829ac0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -20,7 +20,6 @@ config ARM select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND - select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h deleted file mode 100644 index 92f10cb5c70c..000000000000 --- a/arch/arm/include/asm/a.out-core.h +++ /dev/null @@ -1,45 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct task_struct *tsk = current; - - dump->magic = CMAGIC; - dump->start_code = tsk->mm->start_code; - dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); - - dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; - dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; - dump->u_ssize = 0; - - memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg)); - - if (dump->start_stack < 0x04000000) - dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; - - dump->regs = *regs; - dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 06e7d509eaac..413f3876341c 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -54,7 +54,6 @@ struct thread_struct { #define start_thread(regs,pc,sp) \ ({ \ - unsigned long *stack = (unsigned long *)sp; \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ @@ -65,9 +64,6 @@ struct thread_struct { regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ - regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ - regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ - regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ nommu_start_thread(regs); \ }) diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 47bcb2d254af..18d76fd5a2af 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,7 +1,6 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -header-y += a.out.h header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h diff --git a/arch/arm/include/uapi/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h deleted file mode 100644 index 083894b2e3bc..000000000000 --- a/arch/arm/include/uapi/asm/a.out.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ARM_A_OUT_H__ -#define __ARM_A_OUT_H__ - -#include -#include - -struct exec -{ - __u32 a_info; /* Use macros N_MAGIC, etc for access */ - __u32 a_text; /* length of text, in bytes */ - __u32 a_data; /* length of data, in bytes */ - __u32 a_bss; /* length of uninitialized data area for file, in bytes */ - __u32 a_syms; /* length of symbol table data in file, in bytes */ - __u32 a_entry; /* start address */ - __u32 a_trsize; /* length of relocation info for text, in bytes */ - __u32 a_drsize; /* length of relocation info for data, in bytes */ -}; - -/* - * This is always the same - */ -#define N_TXTADDR(a) (0x00008000) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#define M_ARM 103 - -#ifndef LIBRARY_START_TEXT -#define LIBRARY_START_TEXT (0x00c00000) -#endif - -#endif /* __A_OUT_GNU_H__ */ -- cgit v1.2.3 From 8fd62389a778c902c7e8532594ea924bbaf465e8 Mon Sep 17 00:00:00 2001 From: Rohit Vaswani Date: Tue, 18 Jun 2013 18:53:33 -0700 Subject: ARM: msm: Consolidate gpiomux for older architectures Msm gpiomux can be used only for 7x30 and 8x50. Prevent compilation and fix build issues on 7X00, 8X60 and 8960. Signed-off-by: Rohit Vaswani Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 3 +-- arch/arm/mach-msm/gpiomux-v1.c | 33 --------------------------------- arch/arm/mach-msm/gpiomux.h | 10 ---------- 3 files changed, 1 insertion(+), 45 deletions(-) delete mode 100644 arch/arm/mach-msm/gpiomux-v1.c (limited to 'arch/arm') diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e7881b..905efc8cac79 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2abd7144..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41a8923..4410d7766f93 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, -- cgit v1.2.3 From 6eddacae385052c7a1f4f60ffdf0eeec88088ad0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Jul 2013 00:45:45 +0100 Subject: ARM: Fix sorting of machine- initializers So, there's a comment I put at the top of this, which people seem to fail to read. So let's fix it for them instead. Signed-off-by: Russell King --- arch/arm/Makefile | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c0ac0f5e5e5c..6fd2ceae305a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx +machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator @@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX) += iop13xx machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx +machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 +machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MXS) += mxs -machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NSPIRE) += nspire @@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell -machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip @@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 -machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_SIRF) += prima2 +machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_STI) += sti +machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress +machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 +machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_FOOTBRIDGE) += footbridge -machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_PLAT_SPEAR) += spear -machine-$(CONFIG_ARCH_STI) += sti -machine-$(CONFIG_ARCH_VIRT) += virt -machine-$(CONFIG_ARCH_ZYNQ) += zynq -machine-$(CONFIG_ARCH_SUNXI) += sunxi -machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -- cgit v1.2.3 From 3709d323085853dc537711154004ba8704cefb9c Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 29 Jul 2013 12:03:01 -0500 Subject: ARM: dts: omap5-uevm: document regulator signals used on the actual board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, currently we use the Palmas regulator names which is used for different purposes on uEVM. Document the same based on 750-2628-XXX boards - which is meant to be supported by this dts. Reported-by: Marc Jüttner Signed-off-by: Nishanth Menon Acked-by: J Keerthy Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b72678abff..b430b8f884b8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,6 +327,7 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; @@ -331,6 +337,7 @@ }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,6 +346,7 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -347,6 +355,7 @@ }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; @@ -355,6 +364,7 @@ }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -363,6 +373,7 @@ }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; @@ -371,6 +382,7 @@ }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,6 +391,7 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -387,6 +400,7 @@ }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -395,6 +409,7 @@ }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -403,6 +418,7 @@ }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -411,6 +427,7 @@ }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,6 +436,7 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; -- cgit v1.2.3 From e18235a62a7ea737d0a3f73c76eacaaec6df3dfe Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 29 Jul 2013 12:03:02 -0500 Subject: ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. The following fixes are hence mandatory to ensure right voltage is supplied to key OMAP5 SoC voltage rails: - LDO1 supplies VDDAPHY_CAM which is OMAP5's vdda_csiporta/b/c. This can only be supplied at 1.5V or 1.8V and we currently supply 2.8V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. - LDO3 supplies Low Latency Interface(LLI) hardware module which is a special hardware to communicate with Modem. However since uEVM is not setup by default for this communication, this should be disabled by default. Further, vdda_lli is supposed to be 1.5V and not 3V. - LDO4 supplies VDDAPHY_DISP which is vdda_dsiporta/c/vdda_hdmi This can only be supplied at 1.5V or 1.8V and we currently supply 2.2V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. - LDO6 supplies the board specified VDDS_1V2_WKUP supply going to ldo_emu_wkup/vdds_hsic. To stay within the SoC specification supply 1.2V instead of 1.5V. - LDO7 supplies VDD_VPP which is vpp1. This is currently configured for 1.5V which as per data manual "A pulse width of 1000 ns and an amplitude of 2V is required to program each eFuse bit. Otherwise, VPP1 must not be supplied". So, fix the voltage to 2V. and disable the supply since we have no plans of programming efuse bits - it can only be done once - in factory. Further it is not enabled by default by PMIC so, 'boot-on' must be removed, and the 'always-on' needs to be removed to achieve pulsing if efuse needs to be programmed. - LDO9 supplies the board specified vdds_sdcard supply going within SoC specification of 1.8V or 3.0V. Further the supply is controlled by switch enabled by REGEN3. So, introduce REGEN3 and map sdcard slot to be powered by LDO9. Remove 'always-on' allowing the LDO to be disabled on need basis. Reported-by: Marc Jüttner Signed-off-by: Nishanth Menon Acked-by: J Keerthy Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 43 +++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 20 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index b430b8f884b8..247c03c0d734 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -348,10 +348,8 @@ ldo1_reg: ldo1 { /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { @@ -366,19 +364,18 @@ ldo3_reg: ldo3 { /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { @@ -393,8 +390,8 @@ ldo6_reg: ldo6 { /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; @@ -402,10 +399,10 @@ ldo7_reg: ldo7 { /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { @@ -421,8 +418,7 @@ /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; @@ -443,6 +439,13 @@ regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; -- cgit v1.2.3 From bd3c5544a1e98a25d2d24c98779092e0f84373f7 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 29 Jul 2013 12:03:03 -0500 Subject: ARM: dts: omap5-uevm: update optional/unused regulator configurations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. The following optional/unused regulators can be updated: - SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be enabled only when audio is active. Since it does not come active by default, it does not require "always-on" or "boot-on". - LDO2 and LDO8 do not go to any peripheral or connector on the board. Further, these unused regulators should have been 2.8V for LDO2 and 3.0V for LDO8. Mark these LDOs as disabled in the dts until needed. Reported-by: Marc Jüttner Signed-off-by: Nishanth Menon Acked-by: J Keerthy Acked-by: Benoit Cousson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 247c03c0d734..65d7b601651c 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -331,8 +331,6 @@ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; @@ -355,10 +353,10 @@ ldo2_reg: ldo2 { /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { @@ -408,10 +406,11 @@ ldo8_reg: ldo8 { /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { -- cgit v1.2.3 From 7dedd346941d317b6b313de4746ad0354006e68b Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sun, 28 Jul 2013 23:01:48 -0600 Subject: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL With commit '82702ea11ddfe0e43382e1fa5b66d807d8114916' "ARM: OMAP2+: Fix serial init for device tree based booting" stubbing out omap_serial_early_init() for Device tree based booting, there was a crash observed on AM335x based devices when hwmod does a _setup_reset() early at boot. This was rootcaused to hwmod trying to reset console uart while earlycon was using it. The way to tell hwmod not to do this is to specify the HWMOD_INIT_NO_RESET flag, which were infact set by the omap_serial_early_init() function by parsing the cmdline to identify the console device. Parsing the cmdline to identify the uart used by earlycon itself seems broken as there is nothing preventing earlycon to use a different one. This patch, instead, attempts to populate the requiste flags for hwmod based on the CONFIG_DEBUG_OMAPxUARTy FLAGS. This gets rid of the need for cmdline parsing in the DT as well as non-DT cases to identify the uart used by earlycon. Signed-off-by: Rajendra Nayak Reported-by: Mark Jackson Reported-by: Vaibhav Bedia Tested-by: Mark Jackson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.h | 48 ++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 6 +-- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 9 ++-- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 5 +-- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 3 +- arch/arm/mach-omap2/serial.c | 11 ----- 7 files changed, 61 insertions(+), 23 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c0..8440a21fc60a 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b54567..56cebb05509e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a9..d4114a919df7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -1512,7 +1512,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb579..0c3a427da544 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdbe..9c3b504477d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a1..3c70f5c1860f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb63..a388f8c1bcb3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); -- cgit v1.2.3 From f66e329d889fce165074f677509d449fc92ff7b9 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sun, 28 Jul 2013 23:01:50 -0600 Subject: ARM: OMAP2+: Avoid idling memory controllers with no drivers Memory controllers in OMAP (like GPMC and EMIF) have the hwmods marked with HWMOD_INIT_NO_IDLE and are left in enabled state post initial setup. Even if they have drivers missing, avoid idling them as part of omap_device_late_idle() Signed-off-by: Rajendra Nayak Tested-by: Mark Jackson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_device.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..1c82cdedd358 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -842,6 +842,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +851,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", -- cgit v1.2.3 From 7268032dfb1180fca6e91a738380b7ac53684247 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Sun, 28 Jul 2013 23:01:51 -0600 Subject: ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state Some hwmods which are marked with HWMOD_INIT_NO_IDLE are left in enabled state post setup(). When a omap_device gets created for such hwmods make sure the omap_device and pm_runtime states are also in sync for such hwmods by doing a omap_device_enable() and pm_runtime_set_active() for the device. Signed-off-by: Rajendra Nayak Tested-by: Mark Jackson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_device.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 1c82cdedd358..f99f68e1e85b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: -- cgit v1.2.3 From 130142d91467e8a07f3a863db369225a89e84d75 Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Fri, 5 Jul 2013 20:43:00 +0530 Subject: ARM: OMAP2+: hwmod: rt address space index for DT Address space is being removed from hwmod database and DT information in property is being used. Currently the 0th index of device address space is used to map for register target address. This is not always true, eg. cpgmac has it's sysconfig in second address space. Handle it by specifying index of device address space to be used for register target. As default value of this field would be zero with static initialization, existing behaviour of using first address space for register target while using DT would be kept as such. Signed-off-by: Afzal Mohammed Tested-by: Mugunthan V N [paul@pwsan.com: use u8 rather than int to save memory] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_hwmod.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f56..7f4db12b1459 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8440a21fc60a..e1482a9b3bc2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -616,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -665,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; -- cgit v1.2.3 From 50c2a3a1518befe992f868fc1fd867bdad9776ad Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Fri, 5 Jul 2013 20:43:17 +0530 Subject: ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space Register target address to be used for cpgmac is the second device address space. By default, hwmod picks first address space (0th index) for register target. With removal of address space from hwmod and using DT instead, cpgmac is getting wrong address space for register target. Fix it by indicating the address space to be used for register target. Signed-off-by: Afzal Mohammed Tested-by: Mugunthan V N Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index d4114a919df7..eb2f3b93b51c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, -- cgit v1.2.3 From fa3e0cee12fbdd9e0b03470b2b8cf968f537c161 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 27 Jul 2013 03:46:33 +0400 Subject: ARM: shmobile: BOCK-W: fix SDHI0 PFC settings The following message is printed on the BOCK-W kernel bootup: sh-pfc pfc-r8a7778: invalid group "sdhi0" for function "sdhi0" In addition, SD card cannot be detected. The reason is apparently that commit ca7bb309485e4ec89a9addd47bea (ARM: shmobile: bockw: add SDHI0 support) matched the previous version of commit 564617d2f92473031d035deb273da5 (sh-pfc: r8a7778: add SDHI support). Add the missing pin groups according to the BOCK-W board schematics. Signed-off-by: Sergei Shtylyov Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-bockw.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d5554646916c..3354a85c90f7 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 -- cgit v1.2.3 From a601469386b543df2a4d97ad7d524716945278a3 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 26 Jul 2013 17:53:42 +0900 Subject: ARM: shmobile: lager: do not annotate gpio_buttons as __initdata When the gpio-keys device is registered using platform_device_register_data() the platform data argument, lager_keys_pdata is duplicated and thus should be marked as __initdata to avoid wasting memory. However, this is not true of gpio_buttons, a reference to it rather than its value is duplicated when lager_keys_pdata is duplicated. This avoids accessing freed memory if gpio-key events occur after unused kernel memory is freed late in the kernel's boot. This but was added when support for gpio-keys was added to lager in c3842e4fcbb7664276443b79187b7808c2e80a35 ("ARM: shmobile: lager: support GPIO switches") which was included in v3.11-rc1. Tested-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..8d6bd5c5efb9 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), -- cgit v1.2.3 From bed859c1eea89feaba2acbb57d967a6d6f68af09 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 30 Jul 2013 11:33:00 +0100 Subject: ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The name changed in response to review comments for the nvic irqchip driver when the original name was already accepted into Russell King's tree. Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/kernel/entry-v7m.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index e00621f1403f..52b26432c9a9 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -49,7 +49,7 @@ __irq_entry: mov r1, sp stmdb sp!, {lr} @ routine called with r0 = irq number, r1 = struct pt_regs * - bl nvic_do_IRQ + bl nvic_handle_irq pop {lr} @ -- cgit v1.2.3 From 067e710b9a982a92cc8294d7fa0f1e924c65bba1 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 30 Jul 2013 12:38:45 +0100 Subject: ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test Commit 621a0147d5c921f4cc33636ccd0602ad5d7cbfbc ("ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting") breaks the boot on OMAP2430SDP with omap2plus_defconfig. Tracked to an undefined instruction abort from the CP15 read in cache_ops_need_broadcast(). It turns out that gcc 4.5 reorders the extended CP15 read above the is_smp() test. This breaks ARM1136 r0 cores, since they don't support several CP15 registers that later ARM cores do. ARM1136JF-S TRM section 3.2.1 "Register allocation" has the details. So mark the extended CP15 read as clobbering memory, which prevents the compiler from reordering it before the is_smp() test. Russell states that the code generated from this approach is preferable to marking the inline asm as volatile. Remove the existing condition code clobber as it's obsolete, per Nico's post: http://www.spinics.net/lists/arm-kernel/msg261208.html This patch is a collaboration with Will Deacon and Russell King. Comments from Paul Walmsley: Russell, if you accept this one, might you also add Will's ack from the lists: Comments from Paul Walmsley: I'd also be obliged if you could add a Cc: line for Jonathan Austin, since he helped test: Signed-off-by: Paul Walmsley Cc: Will Deacon Cc: Nicolas Pitre Cc: Tony Lindgren Acked-by: Will Deacon Cc: Jonathan Austin Signed-off-by: Russell King --- arch/arm/include/asm/cputype.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 8c25dc4e9851..9672e978d50d 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -89,13 +89,18 @@ extern unsigned int processor_id; __val; \ }) +/* + * The memory clobber prevents gcc 4.5 from reordering the mrc before + * any is_smp() tests, which can cause undefined instruction aborts on + * ARM1136 r0 due to the missing extended CP15 registers. + */ #define read_cpuid_ext(ext_reg) \ ({ \ unsigned int __val; \ asm("mrc p15, 0, %0, c0, " ext_reg \ : "=r" (__val) \ : \ - : "cc"); \ + : "memory"); \ __val; \ }) -- cgit v1.2.3 From f928d4f2a86f46b030fa0850385b4391fc2b5918 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Jul 2013 11:00:23 +0100 Subject: ARM: poison the vectors page Fill the empty regions of the vectors page with an exception generating instruction. This ensures that any inappropriate branch to the vector page is appropriately trapped, rather than just encountering some code to execute. (The vectors page was filled with zero before, which corresponds with the "andeq r0, r0, r0" instruction - a no-op.) Cc: Acked-by Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cab094c234ee..9433e8a12b5e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -818,9 +818,19 @@ void __init early_trap_init(void *vectors_base) extern char __vectors_start[], __vectors_end[]; extern char __kuser_helper_start[], __kuser_helper_end[]; int kuser_sz = __kuser_helper_end - __kuser_helper_start; + unsigned i; vectors_page = vectors_base; + /* + * Poison the vectors page with an undefined instruction. This + * instruction is chosen to be undefined for both ARM and Thumb + * ISAs. The Thumb version is an undefined instruction with a + * branch back to the undefined instruction. + */ + for (i = 0; i < PAGE_SIZE / sizeof(u32); i++) + ((u32 *)vectors_base)[i] = 0xe7fddef1; + /* * Copy the vectors, stubs and kuser helpers (in entry-armv.S) * into the vector page, mapped at 0xffff0000, and ensure these -- cgit v1.2.3 From 5b43e7a383d69381ffe53423e46dd0fafae07da3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Jul 2013 11:32:04 +0100 Subject: ARM: poison memory between kuser helpers Poison the memory between each kuser helper. This ensures that any branch between the kuser helpers will be appropriately trapped. Cc: Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a39cfc2a1f90..02437345289a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -742,6 +742,17 @@ ENDPROC(__switch_to) #endif .endm + .macro kuser_pad, sym, size + .if (. - \sym) & 3 + .rept 4 - (. - \sym) & 3 + .byte 0 + .endr + .endif + .rept (\size - (. - \sym)) / 4 + .word 0xe7fddef1 + .endr + .endm + .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -832,18 +843,13 @@ kuser_cmpxchg64_fixup: #error "incoherent kernel configuration" #endif - /* pad to next slot */ - .rept (16 - (. - __kuser_cmpxchg64)/4) - .word 0 - .endr - - .align 5 + kuser_pad __kuser_cmpxchg64, 64 __kuser_memory_barrier: @ 0xffff0fa0 smp_dmb arm usr_ret lr - .align 5 + kuser_pad __kuser_memory_barrier, 32 __kuser_cmpxchg: @ 0xffff0fc0 @@ -916,13 +922,14 @@ kuser_cmpxchg32_fixup: #endif - .align 5 + kuser_pad __kuser_cmpxchg, 32 __kuser_get_tls: @ 0xffff0fe0 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code - .rep 4 + kuser_pad __kuser_get_tls, 16 + .rep 3 .word 0 @ 0xffff0ff0 software TLS value, then .endr @ pad up to __kuser_helper_version -- cgit v1.2.3 From 19accfd373847ac3d10623c5d20f948846299741 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Jul 2013 11:40:32 +0100 Subject: ARM: move vector stubs Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Cc: Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig | 3 ++- arch/arm/kernel/entry-armv.S | 50 +++++++++++++++++++++----------------------- arch/arm/kernel/traps.c | 4 ++-- arch/arm/mm/mmu.c | 10 ++++++++- 4 files changed, 37 insertions(+), 30 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba412e02ec0c..123b7924904f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -218,7 +218,8 @@ config VECTORS_BASE default DRAM_BASE if REMAP_VECTORS_TO_RAM default 0x00000000 help - The base address of exception vectors. + The base address of exception vectors. This must be two pages + in size. config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 02437345289a..79a41fa978f5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -944,9 +944,9 @@ __kuser_helper_end: /* * Vector stubs. * - * This code is copied to 0xffff0200 so we can use branches in the - * vectors, rather than ldr's. Note that this code must not - * exceed 0x300 bytes. + * This code is copied to 0xffff1000 so we can use branches in the + * vectors, rather than ldr's. Note that this code must not exceed + * a page size. * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC @@ -995,6 +995,15 @@ ENDPROC(vector_\name) .globl __stubs_start __stubs_start: + @ This must be the first word + .word vector_swi + +vector_rst: + ARM( swi SYS_ERROR0 ) + THUMB( svc #0 ) + THUMB( nop ) + b vector_und + /* * Interrupt dispatcher */ @@ -1088,6 +1097,16 @@ __stubs_start: .align 5 +/*============================================================================= + * Address exception handler + *----------------------------------------------------------------------------- + * These aren't too critical. + * (they're not supposed to happen, and won't happen in 32-bit data mode). + */ + +vector_addrexcptn: + b vector_addrexcptn + /*============================================================================= * Undefined FIQs *----------------------------------------------------------------------------- @@ -1101,35 +1120,14 @@ __stubs_start: vector_fiq: subs pc, lr, #4 -/*============================================================================= - * Address exception handler - *----------------------------------------------------------------------------- - * These aren't too critical. - * (they're not supposed to happen, and won't happen in 32-bit data mode). - */ - -vector_addrexcptn: - b vector_addrexcptn - -/* - * We group all the following data together to optimise - * for CPUs with separate I & D caches. - */ - .align 5 - -.LCvswi: - .word vector_swi - .globl __stubs_end __stubs_end: - .equ stubs_offset, __vectors_start + 0x200 - __stubs_start + .equ stubs_offset, __vectors_start + 0x1000 - __stubs_start .globl __vectors_start __vectors_start: - ARM( swi SYS_ERROR0 ) - THUMB( svc #0 ) - THUMB( nop ) + W(b) vector_rst + stubs_offset W(b) vector_und + stubs_offset W(ldr) pc, .LCvswi + stubs_offset W(b) vector_pabt + stubs_offset diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 9433e8a12b5e..2c8c7fa78b8c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -837,7 +837,7 @@ void __init early_trap_init(void *vectors_base) * are visible to the instruction stream. */ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start); + memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); /* @@ -852,7 +852,7 @@ void __init early_trap_init(void *vectors_base) memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); - flush_icache_range(vectors, vectors + PAGE_SIZE); + flush_icache_range(vectors, vectors + PAGE_SIZE * 2); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); #else /* ifndef CONFIG_CPU_V7M */ /* diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f56617a2392..9ea274d1af69 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1160,7 +1160,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE * 2); early_trap_init(vectors); @@ -1210,10 +1210,18 @@ static void __init devicemaps_init(struct machine_desc *mdesc) if (!vectors_high()) { map.virtual = 0; + map.length = PAGE_SIZE * 2; map.type = MT_LOW_VECTORS; create_mapping(&map); } + /* Now create a kernel read-only mapping */ + map.pfn += 1; + map.virtual = 0xffff0000 + PAGE_SIZE; + map.length = PAGE_SIZE; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + /* * Ask the machine support to map in the statically mapped devices. */ -- cgit v1.2.3 From b9b32bf70f2fb710b07c94e13afbc729afe221da Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 4 Jul 2013 12:03:31 +0100 Subject: ARM: use linker magic for vectors and vector stubs Use linker magic to create the vectors and vector stubs: we can tell the linker to place them at an appropriate VMA, but keep the LMA within the kernel. This gets rid of some unnecessary symbol manipulation, and have the linker calculate the relocations appropriately. Cc: Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 28 ++++++++++------------------ arch/arm/kernel/vmlinux.lds.S | 17 +++++++++++++++++ 2 files changed, 27 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 79a41fa978f5..7e1ae91e5b1a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -993,7 +993,7 @@ ENDPROC(vector_\name) 1: .endm - .globl __stubs_start + .section .stubs, "ax", %progbits __stubs_start: @ This must be the first word .word vector_swi @@ -1120,24 +1120,16 @@ vector_addrexcptn: vector_fiq: subs pc, lr, #4 - .globl __stubs_end -__stubs_end: - - .equ stubs_offset, __vectors_start + 0x1000 - __stubs_start - - .globl __vectors_start + .section .vectors, "ax", %progbits __vectors_start: - W(b) vector_rst + stubs_offset - W(b) vector_und + stubs_offset - W(ldr) pc, .LCvswi + stubs_offset - W(b) vector_pabt + stubs_offset - W(b) vector_dabt + stubs_offset - W(b) vector_addrexcptn + stubs_offset - W(b) vector_irq + stubs_offset - W(b) vector_fiq + stubs_offset - - .globl __vectors_end -__vectors_end: + W(b) vector_rst + W(b) vector_und + W(ldr) pc, __vectors_start + 0x1000 + W(b) vector_pabt + W(b) vector_dabt + W(b) vector_addrexcptn + W(b) vector_irq + W(b) vector_fiq .data diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index fa25e4e425f6..7bcee5c9b604 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -148,6 +148,23 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; #endif + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; INIT_TEXT_SECTION(8) .exit.text : { -- cgit v1.2.3 From e39e3f3ebfef03450cf7bfa7a974a8c61f7980c8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 9 Jul 2013 01:03:17 +0100 Subject: ARM: update FIQ support for relocation of vectors FIQ should no longer copy the FIQ code into the user visible vector page. Instead, it should use the hidden page. This change makes that happen. Cc: Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 3 +++ arch/arm/kernel/fiq.c | 19 ++++++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7e1ae91e5b1a..94caefb550bf 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -1120,6 +1120,9 @@ vector_addrexcptn: vector_fiq: subs pc, lr, #4 + .globl vector_fiq_offset + .equ vector_fiq_offset, vector_fiq + .section .vectors, "ax", %progbits __vectors_start: W(b) vector_rst diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 2adda11f712f..25442f451148 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -47,6 +47,11 @@ #include #include +#define FIQ_OFFSET ({ \ + extern void *vector_fiq_offset; \ + (unsigned)&vector_fiq_offset; \ + }) + static unsigned long no_fiq_insn; /* Default reacquire function @@ -80,13 +85,16 @@ int show_fiq_list(struct seq_file *p, int prec) void set_fiq_handler(void *start, unsigned int length) { #if defined(CONFIG_CPU_USE_DOMAINS) - memcpy((void *)0xffff001c, start, length); + void *base = (void *)0xffff0000; #else - memcpy(vectors_page + 0x1c, start, length); + void *base = vectors_page; #endif - flush_icache_range(0xffff001c, 0xffff001c + length); + unsigned offset = FIQ_OFFSET; + + memcpy(base + offset, start, length); + flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); if (!vectors_high()) - flush_icache_range(0x1c, 0x1c + length); + flush_icache_range(offset, offset + length); } int claim_fiq(struct fiq_handler *f) @@ -144,6 +152,7 @@ EXPORT_SYMBOL(disable_fiq); void __init init_FIQ(int start) { - no_fiq_insn = *(unsigned long *)0xffff001c; + unsigned offset = FIQ_OFFSET; + no_fiq_insn = *(unsigned long *)(0xffff0000 + offset); fiq_start = start; } -- cgit v1.2.3 From f6f91b0d9fd971c630cef908dde8fe8795aefbf8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 23 Jul 2013 18:37:00 +0100 Subject: ARM: allow kuser helpers to be removed from the vector page Provide a kernel configuration option to allow the kernel user helpers to be removed from the vector page, thereby preventing their use with ROP (return orientated programming) attacks. This option is only visible for CPU architectures which natively support all the operations which kernel user helpers would normally provide, and must be enabled with caution. Cc: Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 3 +++ arch/arm/kernel/traps.c | 23 ++++++++++++++--------- arch/arm/mm/Kconfig | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 94caefb550bf..d40d0ef389db 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -753,6 +753,7 @@ ENDPROC(__switch_to) .endr .endm +#ifdef CONFIG_KUSER_HELPERS .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -939,6 +940,8 @@ __kuser_helper_version: @ 0xffff0ffc .globl __kuser_helper_end __kuser_helper_end: +#endif + THUMB( .thumb ) /* diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 2c8c7fa78b8c..e3ca35ccd38e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -800,15 +800,26 @@ void __init trap_init(void) return; } -static void __init kuser_get_tls_init(unsigned long vectors) +#ifdef CONFIG_KUSER_HELPERS +static void __init kuser_init(void *vectors) { + extern char __kuser_helper_start[], __kuser_helper_end[]; + int kuser_sz = __kuser_helper_end - __kuser_helper_start; + + memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); + /* * vectors + 0xfe0 = __kuser_get_tls * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8 */ if (tls_emu || has_tls_reg) - memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); + memcpy(vectors + 0xfe0, vectors + 0xfe8, 4); +} +#else +static void __init kuser_init(void *vectors) +{ } +#endif void __init early_trap_init(void *vectors_base) { @@ -816,8 +827,6 @@ void __init early_trap_init(void *vectors_base) unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; - extern char __kuser_helper_start[], __kuser_helper_end[]; - int kuser_sz = __kuser_helper_end - __kuser_helper_start; unsigned i; vectors_page = vectors_base; @@ -838,12 +847,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); - memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); - /* - * Do processor specific fixups for the kuser helpers - */ - kuser_get_tls_init(vectors); + kuser_init(vectors_base); /* * Copy signal return handlers into the vector page, and diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 6cacdc8dd654..db5c2cab8fda 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -421,24 +421,28 @@ config CPU_32v3 select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v6 bool @@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool + select NEED_KUSER_HELPERS help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -783,11 +788,40 @@ config TLS_REG_EMUL config NEEDS_SYSCALL_FOR_CMPXCHG bool + select NEED_KUSER_HELPERS help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. It is just not possible. +config NEED_KUSER_HELPERS + bool + +config KUSER_HELPERS + bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS + default y + help + Warning: disabling this option may break user programs. + + Provide kuser helpers in the vector page. The kernel provides + helper code to userspace in read only form at a fixed location + in the high vector page to allow userspace to be independent of + the CPU type fitted to the system. This permits binaries to be + run on ARMv4 through to ARMv7 without modification. + + However, the fixed address nature of these helpers can be used + by ROP (return orientated programming) authors when creating + exploits. + + If all of the binaries and libraries which run on your platform + are built specifically for your platform, and make no use of + these helpers, then you can turn this option off. However, + when such an binary or library is run, it will receive a SIGILL + signal, which will terminate the program. + + Say N here only if you are absolutely certain that you do not + need these helpers; otherwise, the safe option is to say Y. + config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" depends on CPU_V6K && SMP -- cgit v1.2.3 From 48be69a026b2c17350a5ef18a1959a919f60be7d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 24 Jul 2013 00:29:18 +0100 Subject: ARM: move signal handlers into a vdso-like page Move the signal handlers into a VDSO page rather than keeping them in the vectors page. This allows us to place them randomly within this page, and also map the page at a random location within userspace further protecting these code fragments from ROP attacks. The new VDSO page is also poisoned in the same way as the vector page. Signed-off-by: Russell King --- arch/arm/include/asm/elf.h | 4 ++++ arch/arm/include/asm/mmu.h | 1 + arch/arm/kernel/process.c | 40 ++++++++++++++++++++++++++++++++--- arch/arm/kernel/signal.c | 52 +++++++++++++++++++++++++++++++++++++++------- arch/arm/kernel/signal.h | 12 ----------- arch/arm/kernel/traps.c | 9 -------- 6 files changed, 87 insertions(+), 31 deletions(-) delete mode 100644 arch/arm/kernel/signal.h (limited to 'arch/arm') diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 38050b1c4800..9c9b30717fda 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -130,4 +130,8 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 +struct linux_binprm; +int arch_setup_additional_pages(struct linux_binprm *, int); + #endif diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index e3d55547e755..7345e37155d5 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -8,6 +8,7 @@ typedef struct { atomic64_t id; #endif unsigned int vmalloc_seq; + unsigned long sigpage; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3ca4f6915af..566d0d71a1e7 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -428,8 +428,8 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) #ifdef CONFIG_MMU /* * The vectors page is always readable from user space for the - * atomic helpers and the signal restart code. Insert it into the - * gate_vma so that it is visible through ptrace and /proc//mem. + * atomic helpers. Insert it into the gate_vma so that it is visible + * through ptrace and /proc//mem. */ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, @@ -461,6 +461,40 @@ int in_gate_area_no_mm(unsigned long addr) const char *arch_vma_name(struct vm_area_struct *vma) { - return (vma == &gate_vma) ? "[vectors]" : NULL; + return (vma == &gate_vma) ? "[vectors]" : + (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ? + "[sigpage]" : NULL; +} + +extern struct page *get_signal_page(void); + +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) +{ + struct mm_struct *mm = current->mm; + struct page *page; + unsigned long addr; + int ret; + + page = get_signal_page(); + if (!page) + return -ENOMEM; + + down_write(&mm->mmap_sem); + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &page); + + if (ret == 0) + mm->context.sigpage = addr; + + up_fail: + up_write(&mm->mmap_sem); + return ret; } #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1c16c35c271a..0f17e06d51e6 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include +#include #include #include #include @@ -15,12 +16,11 @@ #include #include +#include #include #include #include -#include "signal.h" - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -40,11 +40,13 @@ #define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) #define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) -const unsigned long sigreturn_codes[7] = { +static const unsigned long sigreturn_codes[7] = { MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +static unsigned long signal_return_offset; + #ifdef CONFIG_CRUNCH static int preserve_crunch_context(struct crunch_sigframe __user *frame) { @@ -401,12 +403,15 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, return 1; if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) { + struct mm_struct *mm = current->mm; + /* - * 32-bit code can use the new high-page - * signal return code support except when the MPU has - * protected the vectors page from PL0 + * 32-bit code can use the signal return page + * except when the MPU has protected the vectors + * page from PL0 */ - retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; + retcode = mm->context.sigpage + signal_return_offset + + (idx << 2) + thumb; } else { /* * Ensure that the instruction cache sees @@ -608,3 +613,36 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) } while (thread_flags & _TIF_WORK_MASK); return 0; } + +static struct page *signal_page; + +struct page *get_signal_page(void) +{ + if (!signal_page) { + unsigned long ptr; + unsigned offset; + void *addr; + + signal_page = alloc_pages(GFP_KERNEL, 0); + + if (!signal_page) + return NULL; + + addr = page_address(signal_page); + + /* Give the signal return code some randomness */ + offset = 0x200 + (get_random_int() & 0x7fc); + signal_return_offset = offset; + + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); + + ptr = (unsigned long)addr + offset; + flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + } + + return signal_page; +} diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h deleted file mode 100644 index 5ff067b7c752..000000000000 --- a/arch/arm/kernel/signal.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * linux/arch/arm/kernel/signal.h - * - * Copyright (C) 2005-2009 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) - -extern const unsigned long sigreturn_codes[7]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index e3ca35ccd38e..ab517fcce21b 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -35,8 +35,6 @@ #include #include -#include "signal.h" - static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; void *vectors_page; @@ -850,13 +848,6 @@ void __init early_trap_init(void *vectors_base) kuser_init(vectors_base); - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ - memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), - sigreturn_codes, sizeof(sigreturn_codes)); - flush_icache_range(vectors, vectors + PAGE_SIZE * 2); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); #else /* ifndef CONFIG_CPU_V7M */ -- cgit v1.2.3 From a5463cd3435475386cbbe7b06e01292ac169d36f Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Jul 2013 21:58:56 +0100 Subject: ARM: make vectors page inaccessible from userspace If kuser helpers are not provided by the kernel, disable user access to the vectors page. With the kuser helpers gone, there is no reason for this page to be visible to userspace. Signed-off-by: Russell King --- arch/arm/include/asm/page.h | 2 ++ arch/arm/kernel/process.c | 7 ++++++- arch/arm/mm/mmu.c | 4 ++++ 3 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 6363f3d1d505..4355f0ec44d6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); +#ifdef CONFIG_KUSER_HELPERS #define __HAVE_ARCH_GATE_AREA 1 +#endif #ifdef CONFIG_ARM_LPAE #include diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 566d0d71a1e7..1e6c33d01c05 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -426,6 +426,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) } #ifdef CONFIG_MMU +#ifdef CONFIG_KUSER_HELPERS /* * The vectors page is always readable from user space for the * atomic helpers. Insert it into the gate_vma so that it is visible @@ -458,10 +459,14 @@ int in_gate_area_no_mm(unsigned long addr) { return in_gate_area(NULL, addr); } +#define is_gate_vma(vma) ((vma) = &gate_vma) +#else +#define is_gate_vma(vma) 0 +#endif const char *arch_vma_name(struct vm_area_struct *vma) { - return (vma == &gate_vma) ? "[vectors]" : + return is_gate_vma(vma) ? "[vectors]" : (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ? "[sigpage]" : NULL; } diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9ea274d1af69..ca46f413d867 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1205,7 +1205,11 @@ static void __init devicemaps_init(struct machine_desc *mdesc) map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; +#ifdef CONFIG_KUSER_HELPERS map.type = MT_HIGH_VECTORS; +#else + map.type = MT_LOW_VECTORS; +#endif create_mapping(&map); if (!vectors_high()) { -- cgit v1.2.3 From 44424c34049f41123a3a8b4853822f47f4ff03a2 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 30 Jul 2013 23:09:46 +0100 Subject: ARM: 7803/1: Fix deadlock scenario with smp_send_stop() If one process calls sys_reboot and that process then stops other CPUs while those CPUs are within a spin_lock() region we can potentially encounter a deadlock scenario like below. CPU 0 CPU 1 ----- ----- spin_lock(my_lock) smp_send_stop() handle_IPI() disable_preemption/irqs while(1); spin_lock(my_lock) <--- Waits forever We shouldn't attempt to run any other tasks after we send a stop IPI to a CPU so disable preemption so that this task runs to completion. We use local_irq_disable() here for cross-arch consistency with x86. Reported-by: Sundarajan Srinivasan Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/process.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3ca4f6915af..08b47ebd3144 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -197,6 +197,7 @@ void machine_shutdown(void) */ void machine_halt(void) { + local_irq_disable(); smp_send_stop(); local_irq_disable(); @@ -211,6 +212,7 @@ void machine_halt(void) */ void machine_power_off(void) { + local_irq_disable(); smp_send_stop(); if (pm_power_off) @@ -230,6 +232,7 @@ void machine_power_off(void) */ void machine_restart(char *cmd) { + local_irq_disable(); smp_send_stop(); arm_pm_restart(reboot_mode, cmd); -- cgit v1.2.3 From 2449189bb7c73b5fe55a18bc0d289e39bdcd4998 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Jul 2013 11:37:17 +0100 Subject: ARM: Add .text annotations where required after __CPUINIT removal Commit 8bd26e3a7 (arm: delete __cpuinit/__CPUINIT usage from all ARM users) caused some code to leak into sections which are discarded through the removal of __CPUINIT annotations. Add appropriate .text annotations to bring these back into the kernel text. Signed-off-by: Russell King --- arch/arm/kernel/head-nommu.S | 1 + arch/arm/kernel/head.S | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index b361de143756..14235ba64a90 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -87,6 +87,7 @@ ENTRY(stext) ENDPROC(stext) #ifdef CONFIG_SMP + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 9cf6063020ae..2c7cc1e03473 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -343,6 +343,7 @@ __turn_mmu_on_loc: .long __turn_mmu_on_end #if defined(CONFIG_SMP) + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. -- cgit v1.2.3 From 70a0f6032985f156bd7e957cfec99c3dd3d592a2 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 23 Jul 2013 10:57:47 +0300 Subject: ARM: OMAP: dss-common: fix Panda's DVI DDC channel Panda's DVI connector's DDC pins are connected to OMAP's third i2c bus. With non-DT, the bus number was 3, and that is what is used in the dss-common.c which contains the platform data for Panda's DVI. However, with DT, the bus number is 2. As we now only have DT boot for Panda, we have to change the bus number to make DVI EDID read operational. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/dss-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeefaebb0..043e5705f2a6 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -42,7 +42,7 @@ /* Using generic display panel */ static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, + .i2c_bus_num = 2, .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; -- cgit v1.2.3 From e0d407564b532d978b03ceccebd224a05d02f111 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 3 Aug 2013 10:30:05 +0100 Subject: ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page) Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson Tested-by: Olof Johansson Signed-off-by: Russell King --- arch/arm/kernel/process.c | 9 +++++---- arch/arm/kernel/signal.c | 41 +++++++++++++++++++---------------------- 2 files changed, 24 insertions(+), 26 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 1e6c33d01c05..d03b5bd889c5 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -471,17 +471,18 @@ const char *arch_vma_name(struct vm_area_struct *vma) "[sigpage]" : NULL; } +static struct page *signal_page; extern struct page *get_signal_page(void); int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; - struct page *page; unsigned long addr; int ret; - page = get_signal_page(); - if (!page) + if (!signal_page) + signal_page = get_signal_page(); + if (!signal_page) return -ENOMEM; down_write(&mm->mmap_sem); @@ -493,7 +494,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) ret = install_special_mapping(mm, addr, PAGE_SIZE, VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, - &page); + &signal_page); if (ret == 0) mm->context.sigpage = addr; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 0f17e06d51e6..39e7105a9b70 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -614,35 +614,32 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) return 0; } -static struct page *signal_page; - struct page *get_signal_page(void) { - if (!signal_page) { - unsigned long ptr; - unsigned offset; - void *addr; + unsigned long ptr; + unsigned offset; + struct page *page; + void *addr; - signal_page = alloc_pages(GFP_KERNEL, 0); + page = alloc_pages(GFP_KERNEL, 0); - if (!signal_page) - return NULL; + if (!page) + return NULL; - addr = page_address(signal_page); + addr = page_address(page); - /* Give the signal return code some randomness */ - offset = 0x200 + (get_random_int() & 0x7fc); - signal_return_offset = offset; + /* Give the signal return code some randomness */ + offset = 0x200 + (get_random_int() & 0x7fc); + signal_return_offset = offset; - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ - memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); - ptr = (unsigned long)addr + offset; - flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); - } + ptr = (unsigned long)addr + offset; + flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); - return signal_page; + return page; } -- cgit v1.2.3 From 8c0cc8a5d90bc7373a7a9e7f7a40eb41f51e03fc Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 3 Aug 2013 10:39:51 +0100 Subject: ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: Olof Johansson Signed-off-by: Russell King --- arch/arm/include/asm/elf.h | 2 ++ arch/arm/kernel/signal.c | 7 +++++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 9c9b30717fda..56211f2084ef 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -130,8 +130,10 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +#ifdef CONFIG_MMU #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 struct linux_binprm; int arch_setup_additional_pages(struct linux_binprm *, int); +#endif #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 39e7105a9b70..ab3304225272 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -402,7 +402,8 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, __put_user(sigreturn_codes[idx+1], rc+1)) return 1; - if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) { +#ifdef CONFIG_MMU + if (cpsr & MODE32_BIT) { struct mm_struct *mm = current->mm; /* @@ -412,7 +413,9 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, */ retcode = mm->context.sigpage + signal_return_offset + (idx << 2) + thumb; - } else { + } else +#endif + { /* * Ensure that the instruction cache sees * the return code written onto the stack. -- cgit v1.2.3 From 95e8ce69a043bc501b45508cc31f1dc9a3f64d3e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 1 Aug 2013 13:13:31 +0100 Subject: ARM: STi: Fix cpu nodes with correct device_type. This patch fixes cpu nodes with device_type = "cpu". This change was not necessary before 3.10-rc7. Without this patch STi SOCs does not boot as SMP. Signed-off-by: Srinivas Kandagatla Signed-off-by: Olof Johansson --- arch/arm/boot/dts/stih41x.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403cab8a..f5b9898d9c6e 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; -- cgit v1.2.3 From d6f67eb787cd9a5d7af2aaac403ea117578af6c9 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 1 Aug 2013 13:13:41 +0100 Subject: ARM: STi: remove sti_secondary_start from INIT section. This patch removes sti_secondary_start from _INIT section, there are 2 reason for this removal. 1. discarding such a small code does not save much, given the RAM sizes. 2. Having this code discarded, creates corruption issue when we boot smp-kernel with nrcpus=1 or with single cpu node in DT. Signed-off-by: Srinivas Kandagatla Signed-off-by: Olof Johansson --- arch/arm/mach-sti/headsmp.S | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc7559f53..4c09bae86edf 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include #include - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're -- cgit v1.2.3 From a1632ad35c37a8bd7bd22dd601906bfef90ad3a6 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 23 Jul 2013 11:11:45 -0700 Subject: ARM: tegra: enable ULPI phy on Colibri T20 This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra20-colibri-512.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2ca160..5592be6f2f7a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; -- cgit v1.2.3 From 1d0bbf428924f94867542d49d436cf254b9dbd06 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 6 Aug 2013 09:49:14 +0100 Subject: ARM: Fix the world famous typo with is_gate_vma() Signed-off-by: Russell King --- arch/arm/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d03b5bd889c5..e28d43f74dbf 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -459,7 +459,7 @@ int in_gate_area_no_mm(unsigned long addr) { return in_gate_area(NULL, addr); } -#define is_gate_vma(vma) ((vma) = &gate_vma) +#define is_gate_vma(vma) ((vma) == &gate_vma) #else #define is_gate_vma(vma) 0 #endif -- cgit v1.2.3 From 1b16c4bcf80e319b2226a886b72b8466179c8e3a Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 6 Aug 2013 09:48:42 +0100 Subject: ARM: Fix !kuser helpers case Fix yet another build failure caused by a weird set of configuration settings: LD init/built-in.o arch/arm/kernel/built-in.o: In function `__dabt_usr': /home/tom3q/kernel/arch/arm/kernel/entry-armv.S:377: undefined reference to `kuser_cmpxchg64_fixup' arch/arm/kernel/built-in.o: In function `__irq_usr': /home/tom3q/kernel/arch/arm/kernel/entry-armv.S:387: undefined reference to `kuser_cmpxchg64_fixup' caused by: CONFIG_KUSER_HELPERS=n CONFIG_CPU_32v6K=n CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG=n Reported-by: Tomasz Figa Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d40d0ef389db..9cbe70c8b0ef 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -357,7 +357,8 @@ ENDPROC(__pabt_svc) .endm .macro kuser_cmpxchg_check -#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \ + !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else -- cgit v1.2.3 From 2ba85e7af4c639d933c9a87a6d7363f2983d5ada Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 8 Aug 2013 11:51:21 +0100 Subject: ARM: Fix FIQ code on VIVT CPUs Aaro Koskinen reports the following oops: Installing fiq handler from c001b110, length 0x164 Unable to handle kernel paging request at virtual address ffff1224 pgd = c0004000 [ffff1224] *pgd=00000000, *pte=11fff0cb, *ppte=11fff00a ... [] (set_fiq_handler+0x0/0x6c) from [] (ams_delta_init_fiq+0xa8/0x160) r6:00000164 r5:c001b110 r4:00000000 r3:fefecb4c [] (ams_delta_init_fiq+0x0/0x160) from [] (ams_delta_init+0xd4/0x114) r6:00000000 r5:fffece10 r4:c037a9e0 [] (ams_delta_init+0x0/0x114) from [] (customize_machine+0x24/0x30) This is because the vectors page is now write-protected, and to change code in there we must write to its original alias. Make that change, and adjust the cache flushing such that the code will become visible to the instruction stream on VIVT CPUs. Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Russell King --- arch/arm/kernel/fiq.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 25442f451148..fc7920288a3d 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -84,17 +84,13 @@ int show_fiq_list(struct seq_file *p, int prec) void set_fiq_handler(void *start, unsigned int length) { -#if defined(CONFIG_CPU_USE_DOMAINS) - void *base = (void *)0xffff0000; -#else void *base = vectors_page; -#endif unsigned offset = FIQ_OFFSET; memcpy(base + offset, start, length); + if (!cache_is_vipt_nonaliasing()) + flush_icache_range(base + offset, offset + length); flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); - if (!vectors_high()) - flush_icache_range(offset, offset + length); } int claim_fiq(struct fiq_handler *f) -- cgit v1.2.3 From c95eb3184ea1a3a2551df57190c81da695e2144b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 7 Aug 2013 23:39:41 +0100 Subject: ARM: 7809/1: perf: fix event validation for software group leaders It is possible to construct an event group with a software event as a group leader and then subsequently add a hardware event to the group. This results in the event group being validated by adding all members of the group to a fake PMU and attempting to allocate each event on their respective PMU. Unfortunately, for software events wthout a corresponding arm_pmu, this results in a kernel crash attempting to dereference the ->get_event_idx function pointer. This patch fixes the problem by checking explicitly for software events and ignoring those in event validation (since they can always be scheduled). We will probably want to revisit this for 3.12, since the validation checks don't appear to work correctly when dealing with multiple hardware PMUs anyway. Cc: Reported-by: Vince Weaver Tested-by: Vince Weaver Tested-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d9f5cd4e533f..0500f10b5041 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -253,6 +253,9 @@ validate_event(struct pmu_hw_events *hw_events, struct arm_pmu *armpmu = to_arm_pmu(event->pmu); struct pmu *leader_pmu = event->group_leader->pmu; + if (is_software_event(event)) + return 1; + if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF) return 1; -- cgit v1.2.3 From d9f966357b14e356dbd83b8f4a197a287ab4ff83 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 8 Aug 2013 18:41:59 +0100 Subject: ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event() Vince Weaver reports an oops in the ARM perf event code while running his perf_fuzzer tool on a pandaboard running v3.11-rc4. Unable to handle kernel paging request at virtual address 73fd14cc pgd = eca6c000 [73fd14cc] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_omap_hdmi omapdss snd_soc_omap_abe_twl6040 snd_soc_twl6040 snd_soc_omap snd_soc_omap_hdmi_card snd_soc_omap_mcpdm snd_soc_omap_mcbsp snd_soc_core snd_compress regmap_spi snd_pcm snd_page_alloc snd_timer snd soundcore CPU: 1 PID: 2790 Comm: perf_fuzzer Not tainted 3.11.0-rc4 #6 task: eddcab80 ti: ed892000 task.ti: ed892000 PC is at armpmu_map_event+0x20/0x88 LR is at armpmu_event_init+0x38/0x280 pc : [] lr : [] psr: 60000013 sp : ed893e40 ip : ecececec fp : edfaec00 r10: 00000000 r9 : 00000000 r8 : ed8c3ac0 r7 : ed8c3b5c r6 : edfaec00 r5 : 00000000 r4 : 00000000 r3 : 000000ff r2 : c0496144 r1 : c049611c r0 : edfaec00 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: aca6c04a DAC: 00000015 Process perf_fuzzer (pid: 2790, stack limit = 0xed892240) Stack: (0xed893e40 to 0xed894000) 3e40: 00000800 c001c17c 00000002 c008a748 00000001 00000000 00000000 c00bf078 3e60: 00000000 edfaee50 00000000 00000000 00000000 edfaec00 ed8c3ac0 edfaec00 3e80: 00000000 c073ffac ed893f20 c00bf180 00000001 00000000 c00bf078 ed893f20 3ea0: 00000000 ed8c3ac0 00000000 00000000 00000000 c0cb0818 eddcab80 c00bf440 3ec0: ed893f20 00000000 eddcab80 eca76800 00000000 eca76800 00000000 00000000 3ee0: 00000000 ec984c80 eddcab80 c00bfe68 00000000 00000000 00000000 00000080 3f00: 00000000 ed892000 00000000 ed892030 00000004 ecc7e3c8 ecc7e3c8 00000000 3f20: 00000000 00000048 ecececec 00000000 00000000 00000000 00000000 00000000 3f40: 00000000 00000000 00297810 00000000 00000000 00000000 00000000 00000000 3f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3f80: 00000002 00000002 000103a4 00000002 0000016c c00128e8 ed892000 00000000 3fa0: 00090998 c0012700 00000002 000103a4 00090ab8 00000000 00000000 0000000f 3fc0: 00000002 000103a4 00000002 0000016c 00090ab0 00090ab8 000107a0 00090998 3fe0: bed92be0 bed92bd0 0000b785 b6e8f6d0 40000010 00090ab8 00000000 00000000 [] (armpmu_map_event+0x20/0x88) from [] (armpmu_event_init+0x38/0x280) [] (armpmu_event_init+0x38/0x280) from [] (perf_init_event+0x108/0x180) [] (perf_init_event+0x108/0x180) from [] (perf_event_alloc+0x248/0x40c) [] (perf_event_alloc+0x248/0x40c) from [] (SyS_perf_event_open+0x4f4/0x8fc) [] (SyS_perf_event_open+0x4f4/0x8fc) from [] (ret_fast_syscall+0x0/0x48) Code: 0a000005 e3540004 0a000016 e3540000 (0791010c) This is because event->attr.config in armpmu_event_init() contains a very large number copied directly from userspace and is never checked against the size of the array indexed in armpmu_map_hw_event(). Fix the problem by checking the value of config before indexing the array and rejecting invalid config values. Reported-by: Vince Weaver Tested-by: Vince Weaver Acked-by: Will Deacon Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 0500f10b5041..e186ee1e63f6 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map) static int armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*event_map)[config]; + int mapping; + + if (config >= PERF_COUNT_HW_MAX) + return -EINVAL; + + mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } -- cgit v1.2.3 From afa31d8eb86fc2f25083e675d57ac8173a98f999 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 12 Aug 2013 18:03:26 +0100 Subject: ARM: 7811/1: locks: use early clobber in arch_spin_trylock The res variable is written before we've finished with the input operands (namely the lock address), so ensure that we mark it as `early clobber' to avoid unintended register sharing. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/spinlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index f8b8965666e9..7ed43f68e044 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -107,7 +107,7 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) " subs %1, %0, %0, ror #16\n" " addeq %0, %0, %4\n" " strexeq %2, %0, [%3]" - : "=&r" (slock), "=&r" (contended), "=r" (res) + : "=&r" (slock), "=&r" (contended), "=&r" (res) : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) : "cc"); } while (res); -- cgit v1.2.3 From 00efaa0250939dc148e2d3104fb3c18395d24a2d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 12 Aug 2013 18:04:05 +0100 Subject: ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock Commit 15e7e5c1ebf5 ("ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock") modifying our arch_spin_trylock to retry the acquisition if the lock appeared uncontended, but the strex failed. This patch does the same for rwlocks, which were missed by the original patch. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/spinlock.h | 49 +++++++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 19 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 7ed43f68e044..b07c09e5a0ac 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -168,17 +168,20 @@ static inline void arch_write_lock(arch_rwlock_t *rw) static inline int arch_write_trylock(arch_rwlock_t *rw) { - unsigned long tmp; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%1]\n" -" teq %0, #0\n" -" strexeq %0, %2, [%1]" - : "=&r" (tmp) - : "r" (&rw->lock), "r" (0x80000000) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " teq %0, #0\n" + " strexeq %1, %3, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock), "r" (0x80000000) + : "cc"); + } while (res); - if (tmp == 0) { + if (!contended) { smp_mb(); return 1; } else { @@ -254,18 +257,26 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) static inline int arch_read_trylock(arch_rwlock_t *rw) { - unsigned long tmp, tmp2 = 1; + unsigned long contended, res; - __asm__ __volatile__( -" ldrex %0, [%2]\n" -" adds %0, %0, #1\n" -" strexpl %1, %0, [%2]\n" - : "=&r" (tmp), "+r" (tmp2) - : "r" (&rw->lock) - : "cc"); + do { + __asm__ __volatile__( + " ldrex %0, [%2]\n" + " mov %1, #0\n" + " adds %0, %0, #1\n" + " strexpl %1, %0, [%2]" + : "=&r" (contended), "=&r" (res) + : "r" (&rw->lock) + : "cc"); + } while (res); - smp_mb(); - return tmp2 == 0; + /* If the lock is negative, then it is already held for write. */ + if (contended < 0x80000000) { + smp_mb(); + return 1; + } else { + return 0; + } } /* read_can_lock - would read_trylock() succeed? */ -- cgit v1.2.3 From 2103f6cba61a8b8bea3fc1b63661d830a2125e76 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 2 Aug 2013 20:52:49 +0100 Subject: ARM: 7807/1: kexec: validate CPU hotplug support Architectures should fully validate whether kexec is possible as part of machine_kexec_prepare(), so that user-space's kexec_load() operation can report any problems. Performing validation in machine_kexec() itself is too late, since it is not allowed to return. Prior to this patch, ARM's machine_kexec() was testing after-the-fact whether machine_kexec_prepare() was able to disable all but one CPU. Instead, modify machine_kexec_prepare() to validate all conditions necessary for machine_kexec_prepare()'s to succeed. BUG if the validation succeeded, yet disabling the CPUs didn't actually work. Signed-off-by: Stephen Warren Acked-by: "Eric W. Biederman" Signed-off-by: Russell King --- arch/arm/include/asm/smp_plat.h | 3 +++ arch/arm/kernel/machine_kexec.c | 20 ++++++++++++++++---- arch/arm/kernel/smp.c | 10 ++++++++++ 3 files changed, 29 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index 6462a721ebd4..a252c0bfacf5 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -88,4 +88,7 @@ static inline u32 mpidr_hash_size(void) { return 1 << mpidr_hash.bits; } + +extern int platform_can_cpu_hotplug(void); + #endif diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 4fb074c446bf..d7c82df69243 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -15,6 +15,7 @@ #include #include #include +#include #include extern const unsigned char relocate_new_kernel[]; @@ -38,6 +39,14 @@ int machine_kexec_prepare(struct kimage *image) __be32 header; int i, err; + /* + * Validate that if the current HW supports SMP, then the SW supports + * and implements CPU hotplug for the current HW. If not, we won't be + * able to kexec reliably, so fail the prepare operation. + */ + if (num_possible_cpus() > 1 && !platform_can_cpu_hotplug()) + return -EINVAL; + /* * No segment at default ATAGs address. try to locate * a dtb using magic. @@ -134,10 +143,13 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; - if (num_online_cpus() > 1) { - pr_err("kexec: error: multiple CPUs still online\n"); - return; - } + /* + * This can only happen if machine_shutdown() failed to disable some + * CPU, and that can only happen if the checks in + * machine_kexec_prepare() were not correct. If this fails, we can't + * reliably kexec anyway, so BUG_ON is appropriate. + */ + BUG_ON(num_online_cpus() > 1); page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index c2b4f8f0be9a..2dc19349eb19 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -145,6 +145,16 @@ int boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENOSYS; } +int platform_can_cpu_hotplug(void) +{ +#ifdef CONFIG_HOTPLUG_CPU + if (smp_ops.cpu_kill) + return 1; +#endif + + return 0; +} + #ifdef CONFIG_HOTPLUG_CPU static void percpu_timer_stop(void); -- cgit v1.2.3 From b88a2595b6d8aedbd275c07dfa784657b4f757eb Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 7 Aug 2013 16:18:08 -0700 Subject: perf/arm: Fix armpmu_map_hw_event() Fix constraint check in armpmu_map_hw_event(). Reported-and-tested-by: Vince Weaver Cc: Signed-off-by: Ingo Molnar Signed-off-by: Linus Torvalds --- arch/arm/kernel/perf_event.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d9f5cd4e533f..21f77906602c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -53,7 +53,12 @@ armpmu_map_cache_event(const unsigned (*cache_map) static int armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { - int mapping = (*event_map)[config]; + int mapping; + + if (config >= PERF_COUNT_HW_MAX) + return -ENOENT; + + mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; } -- cgit v1.2.3 From 2b047252d087be7f2ba088b4933cd904f92e6fce Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 15 Aug 2013 11:42:25 -0700 Subject: Fix TLB gather virtual address range invalidation corner cases Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin Build-testing-by: Stephen Rothwell Build-testing-by: Richard Weinberger Reviewed-by: Michal Hocko Acked-by: Peter Zijlstra Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- arch/arm/include/asm/tlb.h | 7 +++++-- arch/arm64/include/asm/tlb.h | 7 +++++-- arch/ia64/include/asm/tlb.h | 9 ++++++--- arch/s390/include/asm/tlb.h | 8 ++++++-- arch/sh/include/asm/tlb.h | 6 ++++-- arch/um/include/asm/tlb.h | 6 ++++-- fs/exec.c | 4 ++-- include/asm-generic/tlb.h | 2 +- mm/hugetlb.c | 2 +- mm/memory.c | 36 +++++++++++++++++++++--------------- mm/mmap.c | 4 ++-- 11 files changed, 57 insertions(+), 34 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 46e7cfb3e721..0baf7f0d9394 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -43,6 +43,7 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; struct vm_area_struct *vma; + unsigned long start, end; unsigned long range_start; unsigned long range_end; unsigned int nr; @@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = fullmm; + tlb->fullmm = !(start | (end+1)); + tlb->start = start; + tlb->end = end; tlb->vma = NULL; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 46b3beb4b773..717031a762c2 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -35,6 +35,7 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; struct vm_area_struct *vma; + unsigned long start, end; unsigned long range_start; unsigned long range_end; unsigned int nr; @@ -97,10 +98,12 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = fullmm; + tlb->fullmm = !(start | (end+1)); + tlb->start = start; + tlb->end = end; tlb->vma = NULL; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index ef3a9de01954..bc5efc7c3f3f 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -22,7 +22,7 @@ * unmapping a portion of the virtual address space, these hooks are called according to * the following template: * - * tlb <- tlb_gather_mmu(mm, full_mm_flush); // start unmap for address space MM + * tlb <- tlb_gather_mmu(mm, start, end); // start unmap for address space MM * { * for each vma that needs a shootdown do { * tlb_start_vma(tlb, vma); @@ -58,6 +58,7 @@ struct mmu_gather { unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ + unsigned long start, end; unsigned long start_addr; unsigned long end_addr; struct page **pages; @@ -155,13 +156,15 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; tlb->nr = 0; - tlb->fullmm = full_mm_flush; + tlb->fullmm = !(start | (end+1)); + tlb->start = start; + tlb->end = end; tlb->start_addr = ~0UL; } diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index b75d7d686684..23a64d25f2b1 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -32,6 +32,7 @@ struct mmu_gather { struct mm_struct *mm; struct mmu_table_batch *batch; unsigned int fullmm; + unsigned long start, unsigned long end; }; struct mmu_table_batch { @@ -48,10 +49,13 @@ extern void tlb_remove_table(struct mmu_gather *tlb, void *table); static inline void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, - unsigned int full_mm_flush) + unsigned long start, + unsigned long end) { tlb->mm = mm; - tlb->fullmm = full_mm_flush; + tlb->start = start; + tlb->end = end; + tlb->fullmm = !(start | (end+1)); tlb->batch = NULL; if (tlb->fullmm) __tlb_flush_mm(mm); diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index e61d43d9f689..362192ed12fe 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -36,10 +36,12 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = full_mm_flush; + tlb->start = start; + tlb->end = end; + tlb->fullmm = !(start | (end+1)); init_tlb_gather(tlb); } diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 4febacd1a8a1..29b0301c18aa 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -45,10 +45,12 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = full_mm_flush; + tlb->start = start; + tlb->end = end; + tlb->fullmm = !(start | (end+1)); init_tlb_gather(tlb); } diff --git a/fs/exec.c b/fs/exec.c index 9c73def87642..fd774c7cb483 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -608,7 +608,7 @@ static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) return -ENOMEM; lru_add_drain(); - tlb_gather_mmu(&tlb, mm, 0); + tlb_gather_mmu(&tlb, mm, old_start, old_end); if (new_end > old_start) { /* * when the old and new regions overlap clear from new_end. @@ -625,7 +625,7 @@ static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) free_pgd_range(&tlb, old_start, old_end, new_end, vma->vm_next ? vma->vm_next->vm_start : USER_PGTABLES_CEILING); } - tlb_finish_mmu(&tlb, new_end, old_end); + tlb_finish_mmu(&tlb, old_start, old_end); /* * Shrink the vma to just the new range. Always succeeds. diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 13821c339a41..5672d7ea1fa0 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -112,7 +112,7 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); +void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 83aff0a4d093..b60f33080a28 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -2490,7 +2490,7 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, mm = vma->vm_mm; - tlb_gather_mmu(&tlb, mm, 0); + tlb_gather_mmu(&tlb, mm, start, end); __unmap_hugepage_range(&tlb, vma, start, end, ref_page); tlb_finish_mmu(&tlb, start, end); } diff --git a/mm/memory.c b/mm/memory.c index 40268410732a..af84bc0ec17c 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -209,14 +209,15 @@ static int tlb_next_batch(struct mmu_gather *tlb) * tear-down from @mm. The @fullmm argument is used when @mm is without * users and we're going to destroy the full address space (exit/execve). */ -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) +void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { tlb->mm = mm; - tlb->fullmm = fullmm; + /* Is it from 0 to ~0? */ + tlb->fullmm = !(start | (end+1)); tlb->need_flush_all = 0; - tlb->start = -1UL; - tlb->end = 0; + tlb->start = start; + tlb->end = end; tlb->need_flush = 0; tlb->local.next = NULL; tlb->local.nr = 0; @@ -256,8 +257,6 @@ void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long e { struct mmu_gather_batch *batch, *next; - tlb->start = start; - tlb->end = end; tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ @@ -1099,7 +1098,6 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb, spinlock_t *ptl; pte_t *start_pte; pte_t *pte; - unsigned long range_start = addr; again: init_rss_vec(rss); @@ -1205,17 +1203,25 @@ again: * and page-free while holding it. */ if (force_flush) { + unsigned long old_end; + force_flush = 0; -#ifdef HAVE_GENERIC_MMU_GATHER - tlb->start = range_start; + /* + * Flush the TLB just for the previous segment, + * then update the range to be the remaining + * TLB range. + */ + old_end = tlb->end; tlb->end = addr; -#endif + tlb_flush_mmu(tlb); - if (addr != end) { - range_start = addr; + + tlb->start = addr; + tlb->end = old_end; + + if (addr != end) goto again; - } } return addr; @@ -1400,7 +1406,7 @@ void zap_page_range(struct vm_area_struct *vma, unsigned long start, unsigned long end = start + size; lru_add_drain(); - tlb_gather_mmu(&tlb, mm, 0); + tlb_gather_mmu(&tlb, mm, start, end); update_hiwater_rss(mm); mmu_notifier_invalidate_range_start(mm, start, end); for ( ; vma && vma->vm_start < end; vma = vma->vm_next) @@ -1426,7 +1432,7 @@ static void zap_page_range_single(struct vm_area_struct *vma, unsigned long addr unsigned long end = address + size; lru_add_drain(); - tlb_gather_mmu(&tlb, mm, 0); + tlb_gather_mmu(&tlb, mm, address, end); update_hiwater_rss(mm); mmu_notifier_invalidate_range_start(mm, address, end); unmap_single_vma(&tlb, vma, address, end, details); diff --git a/mm/mmap.c b/mm/mmap.c index 1edbaa3136c3..f9c97d10b873 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2336,7 +2336,7 @@ static void unmap_region(struct mm_struct *mm, struct mmu_gather tlb; lru_add_drain(); - tlb_gather_mmu(&tlb, mm, 0); + tlb_gather_mmu(&tlb, mm, start, end); update_hiwater_rss(mm); unmap_vmas(&tlb, vma, start, end); free_pgtables(&tlb, vma, prev ? prev->vm_end : FIRST_USER_ADDRESS, @@ -2709,7 +2709,7 @@ void exit_mmap(struct mm_struct *mm) lru_add_drain(); flush_cache_mm(mm); - tlb_gather_mmu(&tlb, mm, 1); + tlb_gather_mmu(&tlb, mm, 0, -1); /* update_hiwater_rss(mm) here? but nobody should be looking */ /* Use -1 here to ensure all VMAs in the mm are unmapped */ unmap_vmas(&tlb, vma, 0, -1); -- cgit v1.2.3