From 58602c1681bdfa1a0deaa5574b8a72d6e30c0e97 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 9 Sep 2008 16:40:36 -0700 Subject: x86: make intel_64.c the same as intel.c No change in functionality intended - this only adds the 32-bit side. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/intel_64.c | 301 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 284 insertions(+), 17 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c index aef4f2826313..365a008080c2 100644 --- a/arch/x86/kernel/cpu/intel_64.c +++ b/arch/x86/kernel/cpu/intel_64.c @@ -1,42 +1,108 @@ #include +#include + +#include +#include #include +#include +#include + #include +#include +#include +#include #include +#include +#include + +#ifdef CONFIG_X86_64 #include #include +#endif #include "cpu.h" +#ifdef CONFIG_X86_LOCAL_APIC +#include +#include +#include +#endif + static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) + (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +#ifdef CONFIG_X86_64 set_cpu_cap(c, X86_FEATURE_SYSENTER32); +#else + /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ + if (c->x86 == 15 && c->x86_cache_alignment == 64) + c->x86_cache_alignment = 128; +#endif } +#ifdef CONFIG_X86_32 /* - * find out the number of processor cores on the die + * Early probe support logic for ppro memory erratum #50 + * + * This is called before we do cpu ident work */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - if (c->cpuid_level < 4) +int __cpuinit ppro_with_ram_bug(void) +{ + /* Uses data from early_cpu_detect now */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model == 1 && + boot_cpu_data.x86_mask < 8) { + printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n"); return 1; + } + return 0; +} - cpuid_count(4, 0, &eax, &t, &t, &t); - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; +/* + * P4 Xeon errata 037 workaround. + * Hardware prefetcher may cause stale data to be loaded into the cache. + */ +static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) +{ + unsigned long lo, hi; + + if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { + rdmsr(MSR_IA32_MISC_ENABLE, lo, hi); + if ((lo & (1<<9)) == 0) { + printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n"); + printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n"); + lo |= (1<<9); /* Disable hw prefetching */ + wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); + } + } +} + + + +#ifdef CONFIG_X86_F00F_BUG +static void __cpuinit trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); + + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + load_idt(&idt_descr); } +#endif +#endif static void __cpuinit srat_detect_node(void) { -#ifdef CONFIG_NUMA +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) unsigned node; int cpu = smp_processor_id(); int apicid = hard_smp_processor_id(); @@ -52,11 +118,51 @@ static void __cpuinit srat_detect_node(void) #endif } +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, ebx, ecx, edx; + + if (c->cpuid_level < 4) + return 1; + + /* Intel has a non-standard dependency on %ecx for this CPUID level. */ + cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + static void __cpuinit init_intel(struct cpuinfo_x86 *c) { + unsigned int l2 = 0; + char *p = NULL; + early_init_intel(c); - init_intel_cacheinfo(c); +#ifdef CONFIG_X86_F00F_BUG + /* + * All current models of Pentium and Pentium with MMX technology CPUs + * have the F0 0F bug, which lets nonprivileged users lock up the system. + * Note that the workaround only should be initialized once... + */ + c->f00f_bug = 0; + if (!paravirt_enabled() && c->x86 == 5) { + static int f00f_workaround_enabled; + + c->f00f_bug = 1; + if (!f00f_workaround_enabled) { + trap_init_f00f_bug(); + printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); + f00f_workaround_enabled = 1; + } + } +#endif + + l2 = init_intel_cacheinfo(c); if (c->cpuid_level > 9) { unsigned eax = cpuid_eax(10); /* Check for version and the number of counters */ @@ -64,8 +170,70 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); } +#ifdef CONFIG_X86_32 + /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ + if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + clear_cpu_cap(c, X86_FEATURE_SEP); + + /* + * Names for the Pentium II/Celeron processors + * detectable only by also checking the cache size. + * Dixon is NOT a Celeron. + */ + if (c->x86 == 6) { + switch (c->x86_model) { + case 5: + if (c->x86_mask == 0) { + if (l2 == 0) + p = "Celeron (Covington)"; + else if (l2 == 256) + p = "Mobile Pentium II (Dixon)"; + } + break; + + case 6: + if (l2 == 128) + p = "Celeron (Mendocino)"; + else if (c->x86_mask == 0 || c->x86_mask == 5) + p = "Celeron-A"; + break; + + case 8: + if (l2 == 128) + p = "Celeron (Coppermine)"; + break; + } + } + + if (p) + strcpy(c->x86_model_id, p); + + Intel_errata_workarounds(c); + +#ifdef CONFIG_X86_INTEL_USERCOPY + /* + * Set up the preferred alignment for movsl bulk memory moves + */ + switch (c->x86) { + case 4: /* 486: untested */ + break; + case 5: /* Old Pentia: untested */ + break; + case 6: /* PII/PIII only like movsl with 8-byte alignment */ + movsl_mask.mask = 7; + break; + case 15: /* P4 is OK down to 8-byte alignment */ + movsl_mask.mask = 7; + break; + } +#endif + +#endif + + if (cpu_has_xmm2) + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); if (cpu_has_ds) { - unsigned int l1, l2; + unsigned int l1; rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); if (!(l1 & (1<<11))) set_cpu_cap(c, X86_FEATURE_BTS); @@ -74,26 +242,125 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) ds_init_intel(c); } +#ifdef CONFIG_X86_64 if (c->x86 == 15) c->x86_cache_alignment = c->x86_clflush_size * 2; if (c->x86 == 6) set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (cpu_has_xmm2) - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +#else + if (c->x86 == 15) + set_cpu_cap(c, X86_FEATURE_P4); + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_P3); + + if (cpu_has_bts) + ptrace_bts_init_intel(c); + + /* + * See if we have a good local APIC by checking for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ + if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && + (c->x86_mask < 0x6 || c->x86_mask == 0xb)) + set_cpu_cap(c, X86_FEATURE_11AP); + +#ifdef CONFIG_X86_NUMAQ + numaq_tsc_disable(); +#endif +#endif detect_extended_topology(c); - if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) + if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) { + /* + * let's use the legacy cpuid vector 0x1 and 0x4 for topology + * detection. + */ c->x86_max_cores = intel_num_cpu_cores(c); +#ifdef CONFIG_X86_32 + detect_ht(c); +#endif + } + /* Work around errata */ srat_detect_node(); } +#ifdef CONFIG_X86_32 +static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) +{ + /* + * Intel PIII Tualatin. This comes in two flavours. + * One has 256kb of cache, the other 512. We have no way + * to determine which, so we use a boottime override + * for the 512kb model, and assume 256 otherwise. + */ + if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0)) + size = 256; + return size; +} +#endif + static struct cpu_dev intel_cpu_dev __cpuinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, +#ifdef CONFIG_X86_32 + .c_models = { + { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = + { + [0] = "486 DX-25/33", + [1] = "486 DX-50", + [2] = "486 SX", + [3] = "486 DX/2", + [4] = "486 SL", + [5] = "486 SX/2", + [7] = "486 DX/2-WB", + [8] = "486 DX/4", + [9] = "486 DX/4-WB" + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 5, .model_names = + { + [0] = "Pentium 60/66 A-step", + [1] = "Pentium 60/66", + [2] = "Pentium 75 - 200", + [3] = "OverDrive PODP5V83", + [4] = "Pentium MMX", + [7] = "Mobile Pentium 75 - 200", + [8] = "Mobile Pentium MMX" + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 6, .model_names = + { + [0] = "Pentium Pro A-step", + [1] = "Pentium Pro", + [3] = "Pentium II (Klamath)", + [4] = "Pentium II (Deschutes)", + [5] = "Pentium II (Deschutes)", + [6] = "Mobile Pentium II", + [7] = "Pentium III (Katmai)", + [8] = "Pentium III (Coppermine)", + [10] = "Pentium III (Cascades)", + [11] = "Pentium III (Tualatin)", + } + }, + { .vendor = X86_VENDOR_INTEL, .family = 15, .model_names = + { + [0] = "Pentium 4 (Unknown)", + [1] = "Pentium 4 (Willamette)", + [2] = "Pentium 4 (Northwood)", + [4] = "Pentium 4 (Foster)", + [5] = "Pentium 4 (Foster)", + } + }, + }, + .c_size_cache = intel_size_cache, +#endif .c_early_init = early_init_intel, .c_init = init_intel, .c_x86_vendor = X86_VENDOR_INTEL, }; cpu_dev_register(intel_cpu_dev); + -- cgit v1.2.3