From 6298c512bc1007c3ff5c9ce20e6996781651cc45 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 9 Apr 2009 12:28:22 +0200 Subject: x86, mce: make polling timer interval per CPU The polling timer while running per CPU still uses a global next_interval variable, which lead to some CPUs either polling too fast or too slow. This was not a serious problem because all errors get picked up eventually, but it's still better to avoid it. Turn next_interval into a per cpu variable. v2: Fix check_interval == 0 case (Hidetoshi Seto) [ Impact: minor bug fix ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mcheck/mce_64.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 863f89568b1a..82614f1b923a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -452,13 +452,14 @@ void mce_log_therm_throt_event(__u64 status) */ static int check_interval = 5 * 60; /* 5 minutes */ -static int next_interval; /* in jiffies */ +static DEFINE_PER_CPU(int, next_interval); /* in jiffies */ static void mcheck_timer(unsigned long); static DEFINE_PER_CPU(struct timer_list, mce_timer); static void mcheck_timer(unsigned long data) { struct timer_list *t = &per_cpu(mce_timer, data); + int *n; WARN_ON(smp_processor_id() != data); @@ -470,14 +471,14 @@ static void mcheck_timer(unsigned long data) * Alert userspace if needed. If we logged an MCE, reduce the * polling interval, otherwise increase the polling interval. */ + n = &__get_cpu_var(next_interval); if (mce_notify_user()) { - next_interval = max(next_interval/2, HZ/100); + *n = max(*n/2, HZ/100); } else { - next_interval = min(next_interval * 2, - (int)round_jiffies_relative(check_interval*HZ)); + *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ)); } - t->expires = jiffies + next_interval; + t->expires = jiffies + *n; add_timer(t); } @@ -632,14 +633,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c) static void mce_init_timer(void) { struct timer_list *t = &__get_cpu_var(mce_timer); + int *n = &__get_cpu_var(next_interval); - /* data race harmless because everyone sets to the same value */ - if (!next_interval) - next_interval = check_interval * HZ; - if (!next_interval) + *n = check_interval * HZ; + if (!*n) return; setup_timer(t, mcheck_timer, smp_processor_id()); - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + *n); add_timer(t); } @@ -907,7 +907,6 @@ static void mce_cpu_restart(void *data) /* Reinit MCEs after user configuration changes */ static void mce_restart(void) { - next_interval = check_interval * HZ; on_each_cpu(mce_cpu_restart, NULL, 1); } @@ -1110,7 +1109,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, break; case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - t->expires = round_jiffies(jiffies + next_interval); + t->expires = round_jiffies(jiffies + + __get_cpu_var(next_interval)); add_timer_on(t, cpu); smp_call_function_single(cpu, mce_reenable_cpu, &action, 1); break; -- cgit v1.2.3 From 5679af4c1625a1534a4321e1ecc3c48a1cf65eb8 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 7 Apr 2009 17:06:55 +0200 Subject: x86, mce: fix boot logging logic The earlier patch to change the poller to a separate function subtly broke the boot logging logic. This could lead to machine checks getting logged at boot even when disabled or defaulting to off on some systems. Fix that. [ Impact: bug fix - avoid spurious MCE in log ] Signed-off-by: Andi Kleen Reviewed-by: Hidetoshi Seto Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/mce.h | 1 + arch/x86/kernel/cpu/mcheck/mce_64.c | 9 +++++---- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 563933e06a35..4f8c199584e7 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); enum mcp_flags { MCP_TIMESTAMP = (1 << 0), /* log time stamp */ MCP_UC = (1 << 1), /* log uncorrected errors */ + MCP_DONTLOG = (1 << 2), /* only clear, don't log */ }; extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b); diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 82614f1b923a..6fb0b359d2a5 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b) * Don't get the IP here because it's unlikely to * have anything to do with the actual error location. */ - - mce_log(&m); - add_taint(TAINT_MACHINE_CHECK); + if (!(flags & MCP_DONTLOG)) { + mce_log(&m); + add_taint(TAINT_MACHINE_CHECK); + } /* * Clear state for this bank. @@ -585,7 +586,7 @@ static void mce_init(void *dummy) * Log the machine checks left over from the previous reset. */ bitmap_fill(all_banks, MAX_NR_BANKS); - machine_check_poll(MCP_UC, &all_banks); + machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks); set_in_cr4(X86_CR4_MCE); -- cgit v1.2.3 From 044cd80942e47b9de0915b627902adf05c52377f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 01:43:46 -0700 Subject: x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case e820_all_mapped need end is (addr + size) instead of (addr + size - 1) Cc: stable@kernel.org Acked-by: Ingo Molnar Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/pci/mmconfig-shared.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 905bb526b133..5fa10bb9604f 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end < (fixmem32->address + + (mcfg_res->end <= (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end < (address.minimum + address.address_length))) { + (mcfg_res->end <= (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -439,7 +439,7 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, u64 old_size = size; int valid = 0; - while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) { + while (!is_reserved(addr, addr + size, E820_RESERVED)) { size >>= 1; if (size < (16UL<<20)) break; -- cgit v1.2.3 From 0bb1be3e30bfc3e09fa0ff1e887ac7da4a16c3a2 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 16 Apr 2009 13:31:10 -0600 Subject: x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86 Commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029 introduced a new function to set the PCI bus resources. Unfortunately, neither the author, nor the committers seemed to know that we already have somewhere to do that -- pcibios_fixup_bus(). This patch moves the hook (used only by the K8 code) into x86-specific code where it should have been in the first place. Cc: Yinghai Lu Signed-off-by: Matthew Wilcox Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes --- arch/x86/pci/common.c | 7 ++++++- drivers/pci/probe.c | 6 ------ 2 files changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 8c362b96b644..f80ece51305d 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,15 +142,20 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } +void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) +{ +} + /* * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *b) +void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; + set_pci_bus_resources_arch_default(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 8eb50dffb78a..e3c3e081b834 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1118,10 +1118,6 @@ unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) return max; } -void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) -{ -} - struct pci_bus * pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { @@ -1180,8 +1176,6 @@ struct pci_bus * pci_create_bus(struct device *parent, b->resource[0] = &ioport_resource; b->resource[1] = &iomem_resource; - set_pci_bus_resources_arch_default(b); - return b; dev_create_file_err: -- cgit v1.2.3 From 0e94ecd098347874e776f7818728613a335880d1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 18 Apr 2009 10:11:25 -0700 Subject: x86/PCI: set_pci_bus_resources_arch_default cleanups Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move the weak version from common.c to i386.c, and before calling, make sure it's a root bus. Reviewed-by: Matthew Wilcox Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/include/asm/topology.h | 2 +- arch/x86/pci/amd_bus.c | 2 +- arch/x86/pci/common.c | 8 +++----- arch/x86/pci/i386.c | 4 ++++ 4 files changed, 9 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 892b119dba6f..f44b49abca49 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -200,7 +200,7 @@ static inline void arch_fix_phys_package_id(int num, u32 slot) } struct pci_bus; -void set_pci_bus_resources_arch_default(struct pci_bus *b); +void x86_pci_root_bus_res_quirks(struct pci_bus *b); #ifdef CONFIG_SMP #define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 9bb09823b362..e121ee050f7c 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -94,7 +94,7 @@ struct pci_root_info { static int pci_root_num; static struct pci_root_info pci_root_info[PCI_ROOT_NR]; -void set_pci_bus_resources_arch_default(struct pci_bus *b) +void x86_pci_root_bus_res_quirks(struct pci_bus *b) { int i; int j; diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index f80ece51305d..2202b6257b82 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -142,10 +142,6 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) } } -void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b) -{ -} - /* * Called after each bus is probed, but before its children * are examined. @@ -155,7 +151,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; - set_pci_bus_resources_arch_default(b); + /* root bus? */ + if (!b->parent) + x86_pci_root_bus_res_quirks(b); pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index f1817f71e009..a85bef20a3b9 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -238,6 +238,10 @@ void __init pcibios_resource_survey(void) */ fs_initcall(pcibios_assign_resources); +void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b) +{ +} + /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. -- cgit v1.2.3 From b10ceb5530df7ee6e81f92910589a34dd3e5690b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 20 Apr 2009 18:35:40 -0700 Subject: x86/PCI: don't bother with root quirks if _CRS is used It will be overwriten later if _CRS is used, so don't bother to set it. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- arch/x86/pci/amd_bus.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e121ee050f7c..f893d6a6e803 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -100,6 +100,10 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b) int j; struct pci_root_info *info; + /* don't go for it if _CRS is used */ + if (pci_probe & PCI_USE__CRS) + return; + /* if only one root bus, don't need to anything */ if (pci_root_num < 2) return; -- cgit v1.2.3 From c8088112fd96ad8b0f0bcd2f168fe6a17bf3cb41 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 22 Apr 2009 19:48:53 -0600 Subject: OMAP2xxx clock: pre-initialize struct clks early Commit 3f0a820c4c0b4670fb5f164baa5582e23c2ef118 breaks OMAP2xxx boot during initial propagate_rate() on osc_ck and sys_ck. Fix by pre-initializing all struct clks before running any other clock init code. Incorporates review comments from Russell King . Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 <1>pgd = c0004000 <1>[00000000] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #37) PC is at propagate_rate+0x10/0x60 LR is at omap2_clk_init+0x30/0x218 ... Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King --- arch/arm/mach-omap2/clock24xx.c | 6 +++--- arch/arm/plat-omap/clock.c | 7 +++++++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 1e839c5a28c5..984fb86349ba 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -720,14 +720,14 @@ int __init omap2_clk_init(void) clk_init(&omap2_clk_functions); + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_init_one(c->lk.clk); + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); propagate_rate(&osc_ck); sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_init_one(c->lk.clk); - cpu_mask = 0; if (cpu_is_omap2420()) cpu_mask |= CK_242X; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2e0614552ac8..29efc279287a 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -239,6 +239,13 @@ void recalculate_root_clocks(void) } } +/** + * clk_init_one - initialize any fields in the struct clk before clk init + * @clk: struct clk * to initialize + * + * Initialize any struct clk fields needed before normal clk initialization + * can run. No return value. + */ void clk_init_one(struct clk *clk) { INIT_LIST_HEAD(&clk->children); -- cgit v1.2.3 From 323d23aeac4918c7a540b597a26fa7a67645593a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 23 Apr 2009 08:51:22 -0500 Subject: Revert "powerpc: Add support for early tlbilx opcode" This reverts commit e9965577406a2148ade97b5e0ce7c448b4ba4ef6. Our HW guys were able to fix this so it never sees the light of day. Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/mmu.h | 6 ------ arch/powerpc/include/asm/ppc-opcode.h | 11 +---------- arch/powerpc/kernel/cputable.c | 2 +- arch/powerpc/mm/tlb_nohash_low.S | 14 +------------- 4 files changed, 3 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 86d2366ab6a1..cbf154387091 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -52,12 +52,6 @@ */ #define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) -/* This indicates that the processor uses the wrong opcode for tlbilx - * instructions. During the ISA 2.06 development the opcode for tlbilx - * changed and some early implementations used to old opcode - */ -#define MMU_FTR_TLBILX_EARLY_OPCODE ASM_CONST(0x00400000) - #ifndef __ASSEMBLY__ #include diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index ef4da37f3c10..640ccbbc0977 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -44,7 +44,6 @@ #define PPC_INST_STSWI 0x7c0005aa #define PPC_INST_STSWX 0x7c00052a #define PPC_INST_TLBILX 0x7c000024 -#define PPC_INST_TLBILX_EARLY 0x7c000626 #define PPC_INST_WAIT 0x7c00007c /* macros to insert fields into opcodes */ @@ -64,18 +63,10 @@ #define PPC_RFDI stringify_in_c(.long PPC_INST_RFDI) #define PPC_RFMCI stringify_in_c(.long PPC_INST_RFMCI) #define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_INST_TLBILX | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) + __PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b)) #define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) #define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) #define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) - -#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \ - __PPC_T_TLB(t) | \ - __PPC_RA(a) | __PPC_RB(b)) -#define PPC_TLBILX_ALL_EARLY(a, b) PPC_TLBILX_EARLY(0, a, b) -#define PPC_TLBILX_PID_EARLY(a, b) PPC_TLBILX_EARLY(1, a, b) -#define PPC_TLBILX_VA_EARLY(a, b) PPC_TLBILX_EARLY(3, a, b) #define PPC_WAIT(w) stringify_in_c(.long PPC_INST_WAIT | \ __PPC_WC(w)) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 57db50f40289..cd1b687544f3 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1766,7 +1766,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_features = CPU_FTRS_E500MC, .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | - MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE, + MMU_FTR_USE_TLBILX, .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 45fed3698349..788b87c36f77 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -138,11 +138,7 @@ BEGIN_MMU_FTR_SECTION andi. r3,r3,MMUCSR0_TLBFI@l bne 1b MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) - PPC_TLBILX_ALL(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_ALL_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) + PPC_TLBILX_ALL(0,0) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync @@ -155,11 +151,7 @@ BEGIN_MMU_FTR_SECTION wrteei 0 mfspr r4,SPRN_MAS6 /* save MAS6 */ mtspr SPRN_MAS6,r3 - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_PID(0,0) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_PID_EARLY(0,0) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) mtspr SPRN_MAS6,r4 /* restore MAS6 */ wrtee r10 MMU_FTR_SECTION_ELSE @@ -193,11 +185,7 @@ BEGIN_MMU_FTR_SECTION mtspr SPRN_MAS1,r4 tlbwe MMU_FTR_SECTION_ELSE - BEGIN_MMU_FTR_SECTION_NESTED(96) PPC_TLBILX_VA(0,r3) - MMU_FTR_SECTION_ELSE_NESTED(96) - PPC_TLBILX_VA_EARLY(0,r3) - ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96) ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) msync isync -- cgit v1.2.3 From b62c31ae401c6df25c61b206681a6e904ef97169 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 23 Apr 2009 22:56:11 +1000 Subject: powerpc: fix for long standing bug noticed by gcc 4.4.0 Previous gcc versions didn't notice this because one of the preceding #ifs always evaluated to true. gcc 4.4.0 produced this error: arch/powerpc/mm/tlb_nohash_low.S:206:6: error: #elif with no expression Signed-off-by: Stephen Rothwell Acked-by: Josh Boyer Signed-off-by: Kumar Gala --- arch/powerpc/mm/tlb_nohash_low.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 788b87c36f77..3037911279b1 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -191,6 +191,6 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX) isync 1: wrtee r10 blr -#elif +#else #error Unsupported processor type ! #endif -- cgit v1.2.3 From 9232fcc99948e39d5be04fc1c1025bd4f7998739 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Apr 2009 14:49:38 -0700 Subject: davinci: add default Kconfig, add HAVE_IDE Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + arch/arm/configs/davinci_all_defconfig | 1784 ++++++++++++++++++++++++++++++++ 2 files changed, 1785 insertions(+) create mode 100644 arch/arm/configs/davinci_all_defconfig (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..bb57f35e7683 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -585,6 +585,7 @@ config ARCH_DAVINCI select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select ZONE_DMA + select HAVE_IDE help Support for TI's DaVinci platform. diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig new file mode 100644 index 000000000000..eb2738b5be5f --- /dev/null +++ b/arch/arm/configs/davinci_all_defconfig @@ -0,0 +1,1784 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 15 08:16:53 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_DAVINCI=y +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI DaVinci Implementations +# + +# +# DaVinci Core Type +# +CONFIG_ARCH_DAVINCI_DM644x=y + +# +# DaVinci Board Type +# +CONFIG_MACH_DAVINCI_EVM=y +CONFIG_DAVINCI_MUX=y +CONFIG_DAVINCI_MUX_DEBUG=y +CONFIG_DAVINCI_MUX_WARNINGS=y +CONFIG_DAVINCI_RESET_CLOCKS=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=m +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_NAND_DAVINCI=m +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=m + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=m +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y +CONFIG_BLK_DEV_PALMCHIP_BK3710=m +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_LXT_PHY=y +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +CONFIG_LSI_ET1011C_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_XTKBD=m +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_DAVINCI=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +CONFIG_GPIO_PCF857X=m + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_DAVINCI_WATCHDOG=m + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_SOC=m +# CONFIG_SND_DAVINCI_SOC is not set +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=m +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# DaVinci 35x and 644x USB support +# +# CONFIG_USB_MUSB_HOST is not set +CONFIG_USB_MUSB_PERIPHERAL=y +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From e653034e66ec406f37427f588115badc6fc6af64 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:37:21 -0700 Subject: davinci: add runtime CPU detection support Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/id.c | 29 ++++++++++++++-- arch/arm/mach-davinci/include/mach/cputype.h | 49 ++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/cputype.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index bf067d604918..379f2baf66d6 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -17,6 +17,8 @@ #define JTAG_ID_BASE 0x01c40028 +static unsigned int davinci_revision; + struct davinci_id { u8 variant; /* JTAG ID bits 31:28 */ u16 part_no; /* JTAG ID bits 27:12 */ @@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = { .manufacturer = 0x017, .type = 0x64460000, }, + { + /* DM646X */ + .part_no = 0xb770, + .variant = 0x0, + .manufacturer = 0x017, + .type = 0x64670000, + }, + { + /* DM355 */ + .part_no = 0xb73b, + .variant = 0x0, + .manufacturer = 0x00f, + .type = 0x03550000, + }, }; /* @@ -63,6 +79,12 @@ static u8 __init davinci_get_variant(void) return variant; } +unsigned int davinci_rev(void) +{ + return davinci_revision >> 16; +} +EXPORT_SYMBOL(davinci_rev); + void __init davinci_check_revision(void) { int i; @@ -75,7 +97,7 @@ void __init davinci_check_revision(void) /* First check only the major version in a safe way */ for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == (davinci_ids[i].part_no)) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } @@ -84,10 +106,11 @@ void __init davinci_check_revision(void) for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { if (part_no == davinci_ids[i].part_no && variant == davinci_ids[i].variant) { - system_rev = davinci_ids[i].type; + davinci_revision = davinci_ids[i].type; break; } } - printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant); + printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", + davinci_rev(), variant); } diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h new file mode 100644 index 000000000000..27cfb1b3a662 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -0,0 +1,49 @@ +/* + * DaVinci CPU type detection + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * Defines the cpu_is_*() macros for runtime detection of DaVinci + * device type. In addtion, if support for a given device is not + * compiled in to the kernel, the macros return 0 so that + * resulting code can be optimized out. + * + * 2009 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _ASM_ARCH_CPU_H +#define _ASM_ARCH_CPU_H + +extern unsigned int davinci_rev(void); + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_dm ##type(void) \ +{ \ + return (davinci_rev() == (id)) ? 1 : 0; \ +} + +IS_DAVINCI_CPU(644x, 0x6446) +IS_DAVINCI_CPU(646x, 0x6467) +IS_DAVINCI_CPU(355, 0x355) + +#ifdef CONFIG_ARCH_DAVINCI_DM644x +#define cpu_is_davinci_dm644x() is_davinci_dm644x() +#else +#define cpu_is_davinci_dm644x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM646x +#define cpu_is_davinci_dm646x() is_davinci_dm646x() +#else +#define cpu_is_davinci_dm646x() 0 +#endif + +#ifdef CONFIG_ARCH_DAVINCI_DM355 +#define cpu_is_davinci_dm355() is_davinci_dm355() +#else +#define cpu_is_davinci_dm355() 0 +#endif + +#endif -- cgit v1.2.3 From c5b736d093217890245a33e9a98fe92d6f3529bf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 Mar 2009 17:29:01 -0700 Subject: davinci: major rework of clock, PLL, PSC infrastructure This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + arch/arm/mach-davinci/Kconfig | 12 + arch/arm/mach-davinci/board-evm.c | 2 - arch/arm/mach-davinci/clock.c | 385 ++++++++++++++++------------ arch/arm/mach-davinci/clock.h | 87 ++++++- arch/arm/mach-davinci/include/mach/clkdev.h | 13 + arch/arm/mach-davinci/include/mach/clock.h | 1 - arch/arm/mach-davinci/include/mach/psc.h | 53 +++- arch/arm/mach-davinci/io.c | 1 - arch/arm/mach-davinci/psc.c | 81 ++---- 10 files changed, 402 insertions(+), 234 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/clkdev.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bb57f35e7683..cfd99649ad85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -586,6 +586,7 @@ config ARCH_DAVINCI select HAVE_CLK select ZONE_DMA select HAVE_IDE + select COMMON_CLKDEV help Support for TI's DaVinci platform. diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index bac988e7a4c3..af886734c73b 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,18 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM +config DAVINCI_RESET_CLOCKS + bool "Reset unused clocks during boot" + depends on ARCH_DAVINCI + help + Say Y if you want to reset unused clocks during boot. + This option saves power, but assumes all drivers are + using the clock framework. Broken drivers that do not + yet use clock framework may not work with this option. + If you are booting from another operating system, you + probably do not want this option enabled until your + device drivers work properly. + endmenu endif diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 0b97a528902b..1b745c39d891 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -406,8 +406,6 @@ davinci_evm_map_io(void) static __init void davinci_evm_init(void) { - davinci_psc_init(); - #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) #if defined(CONFIG_MTD_PHYSMAP) || \ diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index abb92b7eca0c..f0baaa15a57e 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -1,7 +1,8 @@ /* - * TI DaVinci clock config file + * Clock and PLL control for DaVinci devices * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -13,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,98 +23,50 @@ #include #include +#include #include "clock.h" -/* PLL/Reset register offsets */ -#define PLLM 0x110 - static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); static DEFINE_SPINLOCK(clockfw_lock); -static unsigned int commonrate; -static unsigned int armrate; -static unsigned int fixedrate = 27000000; /* 27 MHZ */ - -extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable); - -/* - * Returns a clock. Note that we first try to use device id on the bus - * and clock name. If this fails, we try to use clock name only. - */ -struct clk *clk_get(struct device *dev, const char *id) +static unsigned psc_domain(struct clk *clk) { - struct clk *p, *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, node) { - if (p->id == idno && - strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - goto found; - } - } - - list_for_each_entry(p, &clocks, node) { - if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { - clk = p; - break; - } - } - -found: - mutex_unlock(&clocks_mutex); - - return clk; + return (clk->flags & PSC_DSP) + ? DAVINCI_GPSC_DSPDOMAIN + : DAVINCI_GPSC_ARMDOMAIN; } -EXPORT_SYMBOL(clk_get); -void clk_put(struct clk *clk) +static void __clk_enable(struct clk *clk) { - if (clk && !IS_ERR(clk)) - module_put(clk->owner); -} -EXPORT_SYMBOL(clk_put); - -static int __clk_enable(struct clk *clk) -{ - if (clk->flags & ALWAYS_ENABLED) - return 0; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1); - return 0; + if (clk->parent) + __clk_enable(clk->parent); + if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 1); } static void __clk_disable(struct clk *clk) { - if (clk->usecount) + if (WARN_ON(clk->usecount == 0)) return; - - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0); + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + if (clk->parent) + __clk_disable(clk->parent); } int clk_enable(struct clk *clk) { unsigned long flags; - int ret = 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; - if (clk->usecount++ == 0) { - spin_lock_irqsave(&clockfw_lock, flags); - ret = __clk_enable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); - return ret; + return 0; } EXPORT_SYMBOL(clk_enable); @@ -123,11 +77,9 @@ void clk_disable(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return; - if (clk->usecount > 0 && !(--clk->usecount)) { - spin_lock_irqsave(&clockfw_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clockfw_lock, flags); - } + spin_lock_irqsave(&clockfw_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clockfw_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return -EINVAL; - return *(clk->rate); + return clk->rate; } EXPORT_SYMBOL(clk_round_rate); @@ -164,10 +116,23 @@ int clk_register(struct clk *clk) if (clk == NULL || IS_ERR(clk)) return -EINVAL; + if (WARN(clk->parent && !clk->parent->rate, + "CLK: %s parent %s has no rate!\n", + clk->name, clk->parent->name)) + return -EINVAL; + mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); + list_add_tail(&clk->node, &clocks); mutex_unlock(&clocks_mutex); + /* If rate is already set, use it */ + if (clk->rate) + return 0; + + /* Otherwise, default to parent rate */ + if (clk->parent) + clk->rate = clk->parent->rate; + return 0; } EXPORT_SYMBOL(clk_register); @@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk) } EXPORT_SYMBOL(clk_unregister); -static struct clk davinci_clks[] = { - { - .name = "ARMCLK", - .rate = &armrate, - .lpsc = -1, - .flags = ALWAYS_ENABLED, - }, - { - .name = "UART", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_UART0, - }, - { - .name = "EMACCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, - }, - { - .name = "I2CCLK", - .rate = &fixedrate, - .lpsc = DAVINCI_LPSC_I2C, - }, - { - .name = "IDECLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_ATA, - }, - { - .name = "McBSPCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_McBSP, - }, - { - .name = "MMCSDCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_MMC_SD, - }, - { - .name = "SPICLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_SPI, - }, - { - .name = "gpio", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_GPIO, - }, - { - .name = "usb", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_USB, - }, - { - .name = "AEMIFCLK", - .rate = &commonrate, - .lpsc = DAVINCI_LPSC_AEMIF, - .usecount = 1, +#ifdef CONFIG_DAVINCI_RESET_CLOCKS +/* + * Disable any unused clocks left on by the bootloader + */ +static int __init clk_disable_unused(void) +{ + struct clk *ck; + + spin_lock_irq(&clockfw_lock); + list_for_each_entry(ck, &clocks, node) { + if (ck->usecount > 0) + continue; + if (!(ck->flags & CLK_PSC)) + continue; + + /* ignore if in Disabled or SwRstDisable states */ + if (!davinci_psc_is_clk_active(ck->lpsc)) + continue; + + pr_info("Clocks: disable unused %s\n", ck->name); + davinci_psc_config(psc_domain(ck), ck->lpsc, 0); } -}; + spin_unlock_irq(&clockfw_lock); + + return 0; +} +late_initcall(clk_disable_unused); +#endif -int __init davinci_clk_init(void) +static void clk_sysclk_recalc(struct clk *clk) { - struct clk *clkp; - int count = 0; - u32 pll_mult; - - pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM); - commonrate = ((pll_mult + 1) * 27000000) / 6; - armrate = ((pll_mult + 1) * 27000000) / 2; - - for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks); - count++, clkp++) { - clk_register(clkp); - - /* Turn on clocks that have been enabled in the - * table above */ - if (clkp->usecount) - clk_enable(clkp); + u32 v, plldiv; + struct pll_data *pll; + + /* If this is the PLL base clock, no more calculations needed */ + if (clk->pll_data) + return; + + if (WARN_ON(!clk->parent)) + return; + + clk->rate = clk->parent->rate; + + /* Otherwise, the parent must be a PLL */ + if (WARN_ON(!clk->parent->pll_data)) + return; + + pll = clk->parent->pll_data; + + /* If pre-PLL, source clock is before the multiplier and divider(s) */ + if (clk->flags & PRE_PLL) + clk->rate = pll->input_rate; + + if (!clk->div_reg) + return; + + v = __raw_readl(pll->base + clk->div_reg); + if (v & PLLDIV_EN) { + plldiv = (v & PLLDIV_RATIO_MASK) + 1; + if (plldiv) + clk->rate /= plldiv; + } +} + +static void __init clk_pll_init(struct clk *clk) +{ + u32 ctrl, mult = 1, prediv = 1, postdiv = 1; + u8 bypass; + struct pll_data *pll = clk->pll_data; + + pll->base = IO_ADDRESS(pll->phys_base); + ctrl = __raw_readl(pll->base + PLLCTL); + clk->rate = pll->input_rate = clk->parent->rate; + + if (ctrl & PLLCTL_PLLEN) { + bypass = 0; + mult = __raw_readl(pll->base + PLLM); + mult = (mult & PLLM_PLLM_MASK) + 1; + } else + bypass = 1; + + if (pll->flags & PLL_HAS_PREDIV) { + prediv = __raw_readl(pll->base + PREDIV); + if (prediv & PLLDIV_EN) + prediv = (prediv & PLLDIV_RATIO_MASK) + 1; + else + prediv = 1; + } + + /* pre-divider is fixed, but (some?) chips won't report that */ + if (cpu_is_davinci_dm355() && pll->num == 1) + prediv = 8; + + if (pll->flags & PLL_HAS_POSTDIV) { + postdiv = __raw_readl(pll->base + POSTDIV); + if (postdiv & PLLDIV_EN) + postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1; + else + postdiv = 1; + } + + if (!bypass) { + clk->rate /= prediv; + clk->rate *= mult; + clk->rate /= postdiv; + } + + pr_debug("PLL%d: input = %lu MHz [ ", + pll->num, clk->parent->rate / 1000000); + if (bypass) + pr_debug("bypass "); + if (prediv > 1) + pr_debug("/ %d ", prediv); + if (mult > 1) + pr_debug("* %d ", mult); + if (postdiv > 1) + pr_debug("/ %d ", postdiv); + pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000); +} + +int __init davinci_clk_init(struct davinci_clk *clocks) + { + struct davinci_clk *c; + struct clk *clk; + + for (c = clocks; c->lk.clk; c++) { + clk = c->lk.clk; + + if (clk->pll_data) + clk_pll_init(clk); + + /* Calculate rates for PLL-derived clocks */ + else if (clk->flags & CLK_PLL) + clk_sysclk_recalc(clk); + + if (clk->lpsc) + clk->flags |= CLK_PSC; + + clkdev_add(&c->lk); + clk_register(clk); + + /* Turn on clocks that Linux doesn't otherwise manage */ + if (clk->flags & ALWAYS_ENABLED) + clk_enable(clk); } return 0; @@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v) { } -static int davinci_ck_show(struct seq_file *m, void *v) +#define CLKNAME_MAX 10 /* longest clock name */ +#define NEST_DELTA 2 +#define NEST_MAX 4 + +static void +dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) { - struct clk *cp; + char *state; + char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX]; + struct clk *clk; + unsigned i; + + if (parent->flags & CLK_PLL) + state = "pll"; + else if (parent->flags & CLK_PSC) + state = "psc"; + else + state = ""; + + /* name */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(s, "%s users=%2d %-3s %9ld Hz\n", + buf, parent->usecount, state, clk_get_rate(parent)); + /* REVISIT show device associations too */ + + /* cost is now small, but not linear... */ + list_for_each_entry(clk, &clocks, node) { + if (clk->parent == parent) + dump_clock(s, nest + NEST_DELTA, clk); + } +} - list_for_each_entry(cp, &clocks, node) - seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount); +static int davinci_ck_show(struct seq_file *m, void *v) +{ + /* Show clock tree; we know the main oscillator is first. + * We trust nonzero usecounts equate to PSC enables... + */ + mutex_lock(&clocks_mutex); + if (!list_empty(&clocks)) + dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + mutex_unlock(&clocks_mutex); return 0; } @@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void) } __initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +#endif /* CONFIG_DEBUG_PROC_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index ed47079a52e4..35736ec202f8 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -1,7 +1,8 @@ /* * TI DaVinci clock definitions * - * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,23 +12,85 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H +#include +#include + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + struct clk { struct list_head node; struct module *owner; const char *name; - unsigned int *rate; - int id; - __s8 usecount; - __u8 flags; - __u8 lpsc; + unsigned long rate; + u8 usecount; + u8 flags; + u8 lpsc; + struct clk *parent; + struct pll_data *pll_data; + u32 div_reg; }; /* Clock flags */ -#define RATE_CKCTL 1 -#define RATE_FIXED 2 -#define RATE_PROPAGATES 4 -#define VIRTUAL_CLOCK 8 -#define ALWAYS_ENABLED 16 -#define ENABLE_REG_32BIT 32 +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */ +#define CLK_PLL BIT(4) /* PLL-derived clock */ +#define PRE_PLL BIT(5) /* source is before PLL mult/div */ + +struct davinci_clk { + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } +int davinci_clk_init(struct davinci_clk *clocks); #endif diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h new file mode 100644 index 000000000000..730c49d1ebd8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/clkdev.h @@ -0,0 +1,13 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +static inline int __clk_get(struct clk *clk) +{ + return 1; +} + +static inline void __clk_put(struct clk *clk) +{ +} + +#endif diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h index 38bdd49bc181..a3b040219876 100644 --- a/arch/arm/mach-davinci/include/mach/clock.h +++ b/arch/arm/mach-davinci/include/mach/clock.h @@ -17,6 +17,5 @@ struct clk; extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); #endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 4977aa071e1e..55a90d419fac 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -38,8 +38,6 @@ #define DAVINCI_LPSC_TPTC1 4 #define DAVINCI_LPSC_EMAC 5 #define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 #define DAVINCI_LPSC_USB 9 #define DAVINCI_LPSC_ATA 10 #define DAVINCI_LPSC_VLYNQ 11 @@ -47,7 +45,6 @@ #define DAVINCI_LPSC_DDR_EMIF 13 #define DAVINCI_LPSC_AEMIF 14 #define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 #define DAVINCI_LPSC_McBSP 17 #define DAVINCI_LPSC_I2C 18 #define DAVINCI_LPSC_UART0 19 @@ -73,4 +70,54 @@ #define DAVINCI_LPSC_GEM 39 #define DAVINCI_LPSC_IMCOP 40 +#define DM355_LPSC_TIMER3 5 +#define DM355_LPSC_SPI1 6 +#define DM355_LPSC_MMC_SD1 7 +#define DM355_LPSC_McBSP1 8 +#define DM355_LPSC_PWM3 10 +#define DM355_LPSC_SPI2 11 +#define DM355_LPSC_RTO 12 +#define DM355_LPSC_VPSS_DAC 41 + +/* + * LPSC Assignments + */ +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 + +extern int davinci_psc_is_clk_active(unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int id, + char enable); + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 299515f70b8b..71a7ae342b91 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -53,5 +53,4 @@ void __init davinci_map_common_io(void) void __init davinci_init_common_hw(void) { - davinci_clk_init(); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 58754f066d5b..c5098831741f 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -36,76 +37,57 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 -/* System control register offsets */ -#define VDD3P3V_PWDN 0x48 -static void davinci_psc_mux(unsigned int id) +/* Return nonzero iff the domain's clock is active */ +int __init davinci_psc_is_clk_active(unsigned int id) { - switch (id) { - case DAVINCI_LPSC_ATA: - davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1); - davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1); - break; - case DAVINCI_LPSC_MMC_SD: - /* VDD power manupulations are done in U-Boot for CPMAC - * so applies to MMC as well - */ - /*Set up the pull regiter for MMC */ - davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN); - davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0); - break; - case DAVINCI_LPSC_I2C: - davinci_mux_peripheral(DAVINCI_MUX_I2C, 1); - break; - case DAVINCI_LPSC_McBSP: - davinci_mux_peripheral(DAVINCI_MUX_ASP, 1); - break; - default: - break; - } + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + + /* if clocked, state can be "Enable" or "SyncReset" */ + return mdstat & BIT(12); } /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); if (enable) mdctl |= 0x00000003; /* Enable Module */ else - mdctl &= 0xFFFFFFF2; /* Disable Module */ - davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id); + mdctl &= 0xFFFFFFE2; /* Disable Module */ + __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT); if ((pdstat & 0x00000001) == 0) { - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - EPCPR); + epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x100; - davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1); + __raw_writel(pdctl1, psc_base + PDCTL1); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } else { ptcmd = 1 << domain; - davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD); + __raw_writel(ptcmd, psc_base + PTCMD); do { - ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - PTSTAT); + ptstat = __raw_readl(psc_base + PTSTAT); } while (!(((ptstat >> domain) & 1) == 0)); } @@ -115,23 +97,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) mdstat_mask = 0x2; do { - mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + - MDSTAT + 4 * id); + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); } while (!((mdstat & 0x0000001F) == mdstat_mask)); - - if (enable) - davinci_psc_mux(id); -} - -void __init davinci_psc_init(void) -{ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1); - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1); - - /* Turn on WatchDog timer LPSC. Needed for RESET to work */ - davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1); } -- cgit v1.2.3 From f5c122da543ebf98a5ccb3166768e38eea3120dd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:04:16 -0500 Subject: davinci: add arch_ioremap() which uses existing static mappings Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-evm.c | 4 +- arch/arm/mach-davinci/devices.c | 2 + arch/arm/mach-davinci/id.c | 6 +- arch/arm/mach-davinci/include/mach/gpio.h | 4 +- arch/arm/mach-davinci/include/mach/hardware.h | 51 +++++------------ arch/arm/mach-davinci/include/mach/io.h | 20 ++----- arch/arm/mach-davinci/io.c | 22 +++++++- arch/arm/mach-davinci/irq.c | 6 +- arch/arm/mach-davinci/mux.c | 5 +- arch/arm/mach-davinci/psc.c | 2 + arch/arm/mach-davinci/time.c | 79 +++++++++++++++------------ arch/arm/mach-davinci/usb.c | 2 + 12 files changed, 105 insertions(+), 98 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index 1b745c39d891..c2701d740a1d 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -36,6 +36,9 @@ #include #include +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + /* other misc. init functions */ void __init davinci_psc_init(void); void __init davinci_irq_init(void); @@ -422,7 +425,6 @@ static __init void davinci_evm_init(void) static __init void davinci_evm_irq_init(void) { - davinci_init_common_hw(); davinci_irq_init(); } diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 808633f9f03c..3ea6d477f06b 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -22,6 +22,8 @@ #include #include +#define DAVINCI_I2C_BASE 0x01C21000 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c index 379f2baf66d6..018b994cd794 100644 --- a/arch/arm/mach-davinci/id.c +++ b/arch/arm/mach-davinci/id.c @@ -15,7 +15,7 @@ #include #include -#define JTAG_ID_BASE 0x01c40028 +#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) static unsigned int davinci_revision; @@ -58,7 +58,7 @@ static u16 __init davinci_get_part_no(void) { u32 dev_id, part_no; - dev_id = davinci_readl(JTAG_ID_BASE); + dev_id = __raw_readl(JTAG_ID_BASE); part_no = ((dev_id >> 12) & 0xffff); @@ -72,7 +72,7 @@ static u8 __init davinci_get_variant(void) { u32 variant; - variant = davinci_readl(JTAG_ID_BASE); + variant = __raw_readl(JTAG_ID_BASE); variant = (variant >> 28) & 0xf; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index b456f079f43f..5e7c36b202f1 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -15,9 +15,11 @@ #include #include -#include + #include +#define DAVINCI_GPIO_BASE 0x01C67000 + /* * basic gpio routines * diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index a2e8969afaca..48c77934d519 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -1,9 +1,9 @@ /* - * Common hardware definitions + * Hardware definitions common to all DaVinci family processors * - * Author: Kevin Hilman, MontaVista Software, Inc. + * Author: Kevin Hilman, Deep Root Systems, LLC * - * 2007 (c) MontaVista Software, Inc. This file is licensed under + * 2007 (c) Deep Root Systems, LLC. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -12,41 +12,16 @@ #define __ASM_ARCH_HARDWARE_H /* - * Base register addresses + * Before you add anything to ths file: + * + * This header is for defines common to ALL DaVinci family chips. + * Anything that is chip specific should go in .h, + * and the chip/board init code should then explicitly include + * .h */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) +#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 + +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h index a48795fd2417..2479785405af 100644 --- a/arch/arm/mach-davinci/include/mach/io.h +++ b/arch/arm/mach-davinci/include/mach/io.h @@ -40,22 +40,12 @@ #else #define IOMEM(x) ((void __force __iomem *)(x)) -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) __raw_readb(IO_ADDRESS(a)) -#define davinci_readw(a) __raw_readw(IO_ADDRESS(a)) -#define davinci_readl(a) __raw_readl(IO_ADDRESS(a)) +#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t) +#define __arch_iounmap(v) davinci_iounmap(v) -#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a)) -#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a)) -#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a)) +void __iomem *davinci_ioremap(unsigned long phys, size_t size, + unsigned int type); +void davinci_iounmap(volatile void __iomem *addr); #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_IO_H */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 71a7ae342b91..a548abb513e2 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -51,6 +51,26 @@ void __init davinci_map_common_io(void) davinci_check_revision(); } -void __init davinci_init_common_hw(void) +#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) +#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) + +/* + * Intercept ioremap() requests for addresses in our fixed mapping regions. + */ +void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (BETWEEN(p, IO_PHYS, IO_SIZE)) + return XLATE(p, IO_PHYS, IO_VIRT); + + return __arm_ioremap(p, size, type); +} +EXPORT_SYMBOL(davinci_ioremap); + +void davinci_iounmap(volatile void __iomem *addr) { + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); } +EXPORT_SYMBOL(davinci_iounmap); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 38021af8359a..e76835cf1018 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -40,14 +40,16 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + static inline unsigned int davinci_irq_readl(int offset) { - return davinci_readl(DAVINCI_ARM_INTC_BASE + offset); + return __raw_readl(INTC_BASE + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset); + __raw_writel(value, INTC_BASE + offset); } /* Disable interrupt */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 8ff9d8aca60b..53734dee1f93 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -23,6 +23,7 @@ static DEFINE_SPINLOCK(mux_lock); void davinci_mux_peripheral(unsigned int mux, unsigned int enable) { + void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); u32 pinmux, muxreg = PINMUX0; if (mux >= DAVINCI_MUX_LEVEL2) { @@ -31,11 +32,11 @@ void davinci_mux_peripheral(unsigned int mux, unsigned int enable) } spin_lock(&mux_lock); - pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg); + pinmux = __raw_readl(base + muxreg); if (enable) pinmux |= (1 << mux); else pinmux &= ~(1 << mux); - davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg); + __raw_writel(pinmux, base + muxreg); spin_unlock(&mux_lock); } diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index c5098831741f..e44544ac2b16 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,6 +28,8 @@ #include #include +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 6c227d4ba998..88864ae067b8 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -16,6 +16,9 @@ #include #include #include +#include +#include +#include #include #include @@ -24,6 +27,8 @@ #include #include #include +#include +#include "clock.h" static struct clock_event_device clockevent_davinci; @@ -99,9 +104,9 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; - unsigned long reg_base; - unsigned long tim_reg; - unsigned long prd_reg; + void __iomem *base; + unsigned long tim_off; + unsigned long prd_off; unsigned long enamode_shift; struct irqaction irqaction; }; @@ -114,15 +119,15 @@ static struct timer_s timers[]; static int timer32_config(struct timer_s *t) { - u32 tcr = davinci_readl(t->reg_base + TCR); + u32 tcr = __raw_readl(t->base + TCR); /* disable timer */ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); /* reset counter to zero, set new period */ - davinci_writel(0, t->tim_reg); - davinci_writel(t->period, t->prd_reg); + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); /* Set enable mode */ if (t->opts & TIMER_OPTS_ONESHOT) { @@ -131,13 +136,13 @@ static int timer32_config(struct timer_s *t) tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; } - davinci_writel(tcr, t->reg_base + TCR); + __raw_writel(tcr, t->base + TCR); return 0; } static inline u32 timer32_read(struct timer_s *t) { - return davinci_readl(t->tim_reg); + return __raw_readl(t->base + t->tim_off); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -176,51 +181,54 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { - u32 tgcr, base = bases[i]; + u32 tgcr; + void __iomem *base = IO_ADDRESS(phys_bases[i]); /* Disabled, Internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset both timers, no pre-scaler for timer34 */ tgcr = 0; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Set both timers to unchained 32-bit */ tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT; - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Unreset timers */ tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TGCR); + __raw_writel(tgcr, base + TGCR); /* Init both counters to zero */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); } /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; + u32 phys_base; if (t->name) { t->id = i; - t->reg_base = (IS_TIMER1(t->id) ? + phys_base = (IS_TIMER1(t->id) ? DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); + t->base = IO_ADDRESS(phys_base); if (IS_TIMER_BOT(t->id)) { t->enamode_shift = 6; - t->tim_reg = t->reg_base + TIM12; - t->prd_reg = t->reg_base + PRD12; + t->tim_off = TIM12; + t->prd_off = PRD12; } else { t->enamode_shift = 22; - t->tim_reg = t->reg_base + TIM34; - t->prd_reg = t->reg_base + PRD34; + t->tim_off = TIM34; + t->prd_off = PRD34; } /* Register interrupt */ @@ -333,42 +341,43 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ void davinci_watchdog_reset(void) { - u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE; + u32 tgcr, wdtcr; + void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); /* disable, internal clock source */ - davinci_writel(0, base + TCR); + __raw_writel(0, base + TCR); /* reset timer, set mode to 64-bit watchdog, and unreset */ tgcr = 0; - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT; tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) | (TGCR_UNRESET << TGCR_TIM34RS_SHIFT); - davinci_writel(tgcr, base + TCR); + __raw_writel(tgcr, base + TCR); /* clear counter and period regs */ - davinci_writel(0, base + TIM12); - davinci_writel(0, base + TIM34); - davinci_writel(0, base + PRD12); - davinci_writel(0, base + PRD34); + __raw_writel(0, base + TIM12); + __raw_writel(0, base + TIM34); + __raw_writel(0, base + PRD12); + __raw_writel(0, base + PRD34); /* enable */ - wdtcr = davinci_readl(base + WDTCR); + wdtcr = __raw_readl(base + WDTCR); wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in pre-active state */ wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* put watchdog in active state */ wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) | (WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT); - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); /* write an invalid value to the WDKEY field to trigger * a watchdog reset */ wdtcr = 0x00004000; - davinci_writel(wdtcr, base + WDTCR); + __raw_writel(wdtcr, base + WDTCR); } diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2429b79f6da2..abedb6337182 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -14,6 +14,8 @@ #include #include +#define DAVINCI_USB_OTG_BASE 0x01C64000 + #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, -- cgit v1.2.3 From da1b94e6a68e1bdeb9cdda016cceb17228b37d25 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Fix for possible race condition in omap_free_dma() Fix the possible race condition in omap_free_dma(). Function omap_free_dma() sets the dev_id = -1 and then accesses the channel afterwards to clear it. But setting the dev_id=-1 makes the channel available for allocation again. So it is possible someone else can grab it and results are unpredictable. To avod this DMA channle is cleared first and then the dev_id = -1 is set. Thanks to McNeil, Sean for ointing out this issue. Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 21cc0142b97a..7fc8c045ad5d 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -760,19 +760,12 @@ void omap_free_dma(int lch) { unsigned long flags; - spin_lock_irqsave(&dma_chan_lock, flags); if (dma_chan[lch].dev_id == -1) { pr_err("omap_dma: trying to free unallocated DMA channel %d\n", lch); - spin_unlock_irqrestore(&dma_chan_lock, flags); return; } - dma_chan[lch].dev_id = -1; - dma_chan[lch].next_lch = -1; - dma_chan[lch].callback = NULL; - spin_unlock_irqrestore(&dma_chan_lock, flags); - if (cpu_class_is_omap1()) { /* Disable all DMA interrupts for the channel. */ dma_write(0, CICR(lch)); @@ -798,6 +791,12 @@ void omap_free_dma(int lch) dma_write(0, CCR(lch)); omap_clear_dma(lch); } + + spin_lock_irqsave(&dma_chan_lock, flags); + dma_chan[lch].dev_id = -1; + dma_chan[lch].next_lch = -1; + dma_chan[lch].callback = NULL; + spin_unlock_irqrestore(&dma_chan_lock, flags); } EXPORT_SYMBOL(omap_free_dma); -- cgit v1.2.3 From ba16ec7cabb3f1aa7bbcb7b9982c4402a2e8ec02 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 23 Apr 2009 11:10:40 -0700 Subject: ARM: OMAP: Remove old dead gpio expander code This should be done with GPIO calls. Patches against the mainline tree welcome to add the necessary working functionality back. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3.c | 101 ------------------------- arch/arm/mach-omap2/board-h4.c | 95 ----------------------- arch/arm/plat-omap/include/mach/gpioexpander.h | 35 --------- arch/arm/plat-omap/include/mach/irda.h | 4 - 4 files changed, 235 deletions(-) delete mode 100644 arch/arm/plat-omap/include/mach/gpioexpander.h (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 4695965114c4..f597968733b4 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -39,12 +39,10 @@ #include #include -#include #include #include #include #include -#include #include #include #include @@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = { .resource = h3_kp_resources, }; - -/* Select between the IrDA and aGPS module - */ -static int h3_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x26))) { - printk(KERN_ERR "Error reading from I/O EXPANDER \n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDA */ - if ((err = write_gpio_expa(expa | 0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { - printk(KERN_ERR "Error writing to I/O EXPANDER \n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x27)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x03; - - if (mode & IR_SIRMODE) { - expa |= 0x01; - } else { /* MIR/FIR */ - expa |= 0x03; - } - - if ((err = write_gpio_expa(expa, 0x27)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h3_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h3_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h3_transceiver_mode, - .select_irda = h3_select_irda, - .rx_channel = OMAP_DMA_UART3_RX, - .tx_channel = OMAP_DMA_UART3_TX, - .dest_start = UART3_THR, - .src_start = UART3_RHR, - .tx_trigger = 0, - .rx_trigger = 0, -}; - -static struct resource h3_irda_resources[] = { - [0] = { - .start = INT_UART3, - .end = INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device h3_irda_device = { - .name = "omapirda", - .id = 0, - .dev = { - .platform_data = &h3_irda_data, - .dma_mask = &irda_dmamask, - }, - .num_resources = ARRAY_SIZE(h3_irda_resources), - .resource = h3_irda_resources, -}; - static struct platform_device h3_lcd_device = { .name = "lcd_h3", .id = -1, @@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = { &nand_device, &smc91x_device, &intlat_device, - &h3_irda_device, &h3_kp_device, &h3_lcd_device, }; diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a0267a9ab466..e7d017cdc438 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -33,10 +33,8 @@ #include #include -#include #include #include -#include #include #include #include @@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -/* Select between the IrDA and aGPS module - */ -static int h4_select_irda(struct device *dev, int state) -{ - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x21))) { - printk(KERN_ERR "Error reading from I/O expander\n"); - return err; - } - - /* 'P6' enable/disable IRDA_TX and IRDA_RX */ - if (state & IR_SEL) { /* IrDa */ - if ((err = write_gpio_expa(expa | 0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } else { - if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { - printk(KERN_ERR "Error writing to I/O expander\n"); - return err; - } - } - return err; -} - -static void set_trans_mode(struct work_struct *work) -{ - struct omap_irda_config *irda_config = - container_of(work, struct omap_irda_config, gpio_expa.work); - int mode = irda_config->mode; - unsigned char expa; - int err = 0; - - if ((err = read_gpio_expa(&expa, 0x20)) != 0) { - printk(KERN_ERR "Error reading from I/O expander\n"); - } - - expa &= ~0x01; - - if (!(mode & IR_SIRMODE)) { /* MIR/FIR */ - expa |= 0x01; - } - - if ((err = write_gpio_expa(expa, 0x20)) != 0) { - printk(KERN_ERR "Error writing to I/O expander\n"); - } -} - -static int h4_transceiver_mode(struct device *dev, int mode) -{ - struct omap_irda_config *irda_config = dev->platform_data; - - irda_config->mode = mode; - cancel_delayed_work(&irda_config->gpio_expa); - PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode); - schedule_delayed_work(&irda_config->gpio_expa, 0); - - return 0; -} - -static struct omap_irda_config h4_irda_data = { - .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, - .transceiver_mode = h4_transceiver_mode, - .select_irda = h4_select_irda, - .rx_channel = OMAP24XX_DMA_UART3_RX, - .tx_channel = OMAP24XX_DMA_UART3_TX, - .dest_start = OMAP_UART3_BASE, - .src_start = OMAP_UART3_BASE, - .tx_trigger = OMAP24XX_DMA_UART3_TX, - .rx_trigger = OMAP24XX_DMA_UART3_RX, -}; - -static struct resource h4_irda_resources[] = { - [0] = { - .start = INT_24XX_UART3_IRQ, - .end = INT_24XX_UART3_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_irda_device = { - .name = "omapirda", - .id = -1, - .dev = { - .platform_data = &h4_irda_data, - }, - .num_resources = 1, - .resource = h4_irda_resources, -}; - static struct omap_kp_platform_data h4_kp_data = { .rows = 6, .cols = 7, @@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = { static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_irda_device, &h4_kp_device, &h4_lcd_device, }; diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h deleted file mode 100644 index 90444a0d6b1a..000000000000 --- a/arch/arm/plat-omap/include/mach/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h index 8372a00d8e0b..40f60339d1c6 100644 --- a/arch/arm/plat-omap/include/mach/irda.h +++ b/arch/arm/plat-omap/include/mach/irda.h @@ -21,10 +21,6 @@ struct omap_irda_config { int transceiver_cap; int (*transceiver_mode)(struct device *dev, int mode); int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; int rx_channel; int tx_channel; unsigned long dest_start; -- cgit v1.2.3 From 1748ae0e95760d62de501743f883af6833f33357 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:44 -0700 Subject: ARM: OMAP: MMC: Remove unused power_pin Remove unused power_pin Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/mmc.h | 1 - drivers/mmc/host/omap.c | 2 -- 2 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h index 4435bd434e17..81d5b36534b3 100644 --- a/arch/arm/plat-omap/include/mach/mmc.h +++ b/arch/arm/plat-omap/include/mach/mmc.h @@ -79,7 +79,6 @@ struct omap_mmc_platform_data { /* use the internal clock */ unsigned internal_clock:1; - s16 power_pin; int switch_pin; /* gpio (card detect) */ int gpio_wp; /* gpio (write protect) */ diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 5570849188cc..bfa25c01c872 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -157,8 +157,6 @@ struct mmc_omap_host { struct timer_list dma_timer; unsigned dma_len; - short power_pin; - struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS]; struct mmc_omap_slot *current_slot; spinlock_t slot_lock; -- cgit v1.2.3 From 6a3260755fc0d86adacd912e3acf40e9ac5bbe2e Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:47 -0700 Subject: ARM: OMAP1: Simplify board-h2 MMC setup Simplify board-h2 MMC setup Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2-mmc.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 44d4a966bed9..46098f546824 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -26,19 +26,13 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } static int mmc_late_init(struct device *dev) { - int ret; - - ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); + int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power"); if (ret < 0) return ret; @@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev) return ret; } -static void mmc_shutdown(struct device *dev) +static void mmc_cleanup(struct device *dev) { gpio_free(H2_TPS_GPIO_MMC_PWR_EN); } @@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev) static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 1, .init = mmc_late_init, - .shutdown = mmc_shutdown, + .cleanup = mmc_cleanup, .dma_mask = 0xffffffff, .slots[0] = { .set_power = mmc_set_power, -- cgit v1.2.3 From bac5b29fb9582df22b4c1386162ac31b62edf121 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP1: Fix mmc_set_power GPIO usage Simple simplification... Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h3-mmc.c | 6 +----- arch/arm/mach-omap1/board-nokia770.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 0d8a3c195e2e..5e8877ce35e0 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -26,11 +26,7 @@ static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1); - else - gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0); - + gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on); return 0; } diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7bc7a3cb9c51..d1ed1365319e 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { - if (power_on) - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1); - else - gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0); - + gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); return 0; } -- cgit v1.2.3 From 6b7bff3169192e2870f68f47fde25a22e136918e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 23 Apr 2009 11:10:48 -0700 Subject: ARM: OMAP2: Remove defines and resource init for OMAP24XX EAC There is no anymore legacy driver for OMAP24XX Enhanced Audio Controller in linux-omap and it was newer in mainline so cleanup these unneeded defines and initialization code. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 33 ----------- arch/arm/plat-omap/include/mach/eac.h | 100 ---------------------------------- 2 files changed, 133 deletions(-) delete mode 100644 arch/arm/plat-omap/include/mach/eac.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d6b4b2f8722f..496983ade97e 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) @@ -366,38 +365,6 @@ static void omap_init_mcspi(void) static inline void omap_init_mcspi(void) {} #endif -#ifdef CONFIG_SND_OMAP24XX_EAC - -#define OMAP2_EAC_BASE 0x48090000 - -static struct resource omap2_eac_resources[] = { - { - .start = OMAP2_EAC_BASE, - .end = OMAP2_EAC_BASE + 0x109, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap2_eac_device = { - .name = "omap24xx-eac", - .id = -1, - .num_resources = ARRAY_SIZE(omap2_eac_resources), - .resource = omap2_eac_resources, - .dev = { - .platform_data = NULL, - }, -}; - -void omap_init_eac(struct eac_platform_data *pdata) -{ - omap2_eac_device.dev.platform_data = pdata; - platform_device_register(&omap2_eac_device); -} - -#else -void omap_init_eac(struct eac_platform_data *pdata) {} -#endif - #ifdef CONFIG_OMAP_SHA1_MD5 static struct resource sha1_md5_resources[] = { { diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h deleted file mode 100644 index 9e62cf030270..000000000000 --- a/arch/arm/plat-omap/include/mach/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ -- cgit v1.2.3 From d94a2eddf50c4aa1553acf3025f45d03704a1f97 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2: possible division by 0 In linus' git tree the functions can be found at: vi arch/arm/mach-omap2/usb-tusb6010.c +200 - tusb6010_platform_retime() vi arch/arm/mach-omap2/gpmc.c +94 - gpmc_get_fclk_period() vi arch/arm/mach-omap2/usb-tusb6010.c +53 - tusb_set_async_mode() vi arch/arm/mach-omap2/usb-tusb6010.c +111 - tusb_set_sync_mode() is -ENODEV appropriate when sysclk_ps == 0? This was found by code analysis, please review. ------------------------------>8-------------8<--------------------------------- gpmc_get_fclk_period() may return 0 when gpmc_l3_clk is not enabled. This is not checked in tusb6010_platform_retime() nor in tusb_set_async_mode() it seems. In tusb_set_sync_mode() this may result in a division by zero. Signed-off-by: Roel Kluin Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 15e509013def..8df55f40f4c0 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec) + if (!refclk_psec || sysclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; -- cgit v1.2.3 From b3bb4f688c225d9455bbd59e98f634f98c1074d0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP2/3: GPIO: do not attempt to wake-enable The GPIO IRQ enable/disable path attempts to also enable IRQ wake support for the parent GPIO bank IRQ as well. However, since there is no 'set_wake' hook for the bank IRQs, these calls will always fail. Also, since the enable will fail on the suspend path, the disable on the resume path will trigger unbalanced enable/disable warnings. This was discovered in the suspend/resume path on OMAP3/Beagle using the gpio-keys driver which disables/re-enables GPIO IRQ wakeups in the suspend/resume path. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d3fa41e3d8c5..210a1c045554 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -921,13 +921,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) case METHOD_MPUIO: case METHOD_GPIO_1610: spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif @@ -940,13 +937,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) return -EINVAL; } spin_lock_irqsave(&bank->lock, flags); - if (enable) { + if (enable) bank->suspend_wakeup |= (1 << gpio); - enable_irq_wake(bank->irq); - } else { - disable_irq_wake(bank->irq); + else bank->suspend_wakeup &= ~(1 << gpio); - } spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -- cgit v1.2.3 From c485ab50dd90412d88e25ed30b4e0d5ff636ffe2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 23 Apr 2009 11:10:49 -0700 Subject: ARM: OMAP3: remove duplicated #include Removed duplicated #include in arch/arm/mach-omap2/board-rx51.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3a0daac6c839..374ff63c3eb2 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From bedfd15410a331e4183d3d926bb944682cad61f3 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Fixed spurious IRQ issue for GPIO interrupts Flush posted write to IRQSTATUS register in GPIO IRQ handler. This eliminates the below error for all peripherals that use GPIO interrupts. <4>Spurious irq 95: 0xffffffdf, please flush posted write for irq 31 Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 210a1c045554..17d7afe42b83 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; if (cpu_is_omap24xx() || cpu_is_omap34xx()) - __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); #endif } -- cgit v1.2.3 From 846c29f109fc27bd93817271689a752afc9168f8 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 23 Apr 2009 11:10:50 -0700 Subject: ARM: OMAP3: Clean up spurious interrupt check logic SPURIOUSIRQ is contained in bits 31:7 of INTC_SIR, so INTC_SIR must be right shifted by 7, not 6. No change in logic, only changes for better readability. Refer to register definition of INTCPS_SIR_IRQ in OMAP3 Manual. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 9ba20d985dda..998c5c45587e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq) u32 sir, spurious; sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR); - spurious = sir >> 6; + spurious = sir >> 7; - if (spurious > 1) { + if (spurious) { printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush " "posted write for irq %i\n", irq, sir, previous_irq); -- cgit v1.2.3 From 15ca78f7925899fee7bc265651a69ab51f449eea Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:06 -0600 Subject: OMAP2xxx clock: fix broken cpu_mask code Commit 8ad8ff6548f1c0bcbeaa02f274b3927c5015a921 breaks the OMAP2xxx cpu_mask code, which causes OMAP2xxx to panic on boot. Fix by removing the cpu_mask auto variable and by changing CK_242X and CK_243X to use RATE_IN_242X/RATE_IN_243X. Resolves <1>Unable to handle kernel NULL pointer dereference at virtual address 0000000c <1>pgd = c0004000 <1>[0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] Modules linked in: CPU: 0 Not tainted (2.6.29-omap1 #32) PC is at omap2_clk_set_parent+0x104/0x120 LR is at omap2_clk_set_parent+0x28/0x120 Signed-off-by: Paul Walmsley Tested-by: Jarkko Nikula Cc: Russell King --- arch/arm/mach-omap2/clock24xx.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 984fb86349ba..5ea418327e89 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -60,8 +60,8 @@ struct omap_clk { }, \ } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) +#define CK_243X RATE_IN_243X +#define CK_242X RATE_IN_242X static struct omap_clk omap24xx_clks[] = { /* external root sources */ @@ -711,7 +711,7 @@ int __init omap2_clk_init(void) { struct prcm_config *prcm; struct omap_clk *c; - u32 clkrate, cpu_mask; + u32 clkrate; if (cpu_is_omap242x()) cpu_mask = RATE_IN_242X; @@ -728,12 +728,6 @@ int __init omap2_clk_init(void) sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); propagate_rate(&sys_ck); - cpu_mask = 0; - if (cpu_is_omap2420()) - cpu_mask |= CK_242X; - if (cpu_is_omap2430()) - cpu_mask |= CK_243X; - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) if (c->cpu & cpu_mask) { clkdev_add(&c->lk); -- cgit v1.2.3 From 9e53dd7180a1fd59a785dbfb9c633f01c96c388f Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP3: clock: Camera module doesn't have IDLEST bit This patch avoids waiting for the camera module to become ready, since it doesn't have IDLEST bit. Based on a earlier hack done by Paul Walmsley on Sep 9 2008 on linux-omap tree. Signed-off-by: Sergio Aguirre Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock34xx.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 70ec10deb654..f0090175d597 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2052,7 +2052,7 @@ static struct clk dss_ick = { static struct clk cam_mclk = { .name = "cam_mclk", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll4_m5x2_ck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_CAM_SHIFT, @@ -2063,7 +2063,7 @@ static struct clk cam_mclk = { static struct clk cam_ick = { /* Handles both L3 and L4 clocks */ .name = "cam_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), @@ -2074,7 +2074,7 @@ static struct clk cam_ick = { static struct clk csi2_96m_fck = { .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &core_96m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), -- cgit v1.2.3 From d53eb73795c55101453ea6ca4f486ea2ff7b0496 Mon Sep 17 00:00:00 2001 From: Arun KS Date: Thu, 23 Apr 2009 21:11:07 -0600 Subject: OMAP1: clock: Typo fix for clock in omap1 Typo error when requesting for clock for dsp in omap1 Signed-off-by: Arun KS Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/mcbsp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d040c3f1027f..a2d7814896be 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id) */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { if (dsp_use++ == 0) { - api_clk = clk_get(NULL, "api_clk"); - dsp_clk = clk_get(NULL, "dsp_clk"); + api_clk = clk_get(NULL, "api_ck"); + dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { clk_enable(api_clk); clk_enable(dsp_clk); -- cgit v1.2.3 From 9198a40620fc69d577e854fb571e76af3313bc53 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP3 GPTIMER: fix GPTIMER12 IRQ GPTIMER12 IRQ is at IRQ 95 on OMAP3, unlike OMAP2. (ref: OMAP34xx Multimedia High Security (HS) Device Silicon Revision 3.0 Security Addendum Rev. B, SWPU119B) Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index bfd47570cc91..c99d611242a9 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = { { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, - { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, + { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ }, }; static const char *omap3_dm_source_names[] __initdata = { -- cgit v1.2.3 From 219c5b98d5eb86c75abc716087f494fe06c6b64e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 23 Apr 2009 21:11:08 -0600 Subject: OMAP: dmtimer: enable all timers to be wakeup events All GP timers on OMAP2/3 can generate wakeup events. The wakeup status is cleared in the PRCM interrupt handler. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/dmtimer.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index c99d611242a9..a05205c12f7b 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ /* - * Enable wake-up only for GPT1 on OMAP2 CPUs. - * FIXME: All timers should have wake-up enabled and clear - * PRCM status. + * Enable wake-up on OMAP2 CPUs. */ - if (cpu_class_is_omap2() && (timer == &dm_timers[0])) + if (cpu_class_is_omap2()) l |= 1 << 2; omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); -- cgit v1.2.3 From f248076c0dad45b7e50f27096e1aac6a617665db Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 23 Apr 2009 21:11:10 -0600 Subject: OMAP2/3 GPTIMER: allow system tick GPTIMER to be changed in board-*.c files Add a function omap2_gp_clockevent_set_gptimer() for board-*.c files to use in .init_irq functions to configure the system tick GPTIMER. Practical choices at this point are GPTIMER1 or GPTIMER12. Both of these timers are in the WKUP powerdomain, and so are unaffected by chip power management. GPTIMER1 can use sys_clk as a source, for applications where a high-resolution timer is more important than power management. GPTIMER12 has the special property that it has the secure 32kHz oscillator as its source clock, which may be less prone to glitches than the off-chip 32kHz oscillator. But on HS devices, it may not be available for Linux use. It appears that most boards are fine with GPTIMER1, but BeagleBoard should use GPTIMER12 when using a 32KiHz timer source, due to hardware bugs in revisions B4 and below. Modify board-omap3beagle.c to use GPTIMER12. This patch originally used a Kbuild config option to select the GPTIMER, but was changed to allow this to be specified in board-*.c files, per Tony's request. Kalle Vallo found a bug in an earlier version of this patch - thanks Kalle. Tested on Beagle rev B4 ES2.1, with and without CONFIG_OMAP_32K_TIMER, and 3430SDP. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Cc: Kalle Valo --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +++ arch/arm/mach-omap2/clock24xx.c | 1 + arch/arm/mach-omap2/clock24xx.h | 10 ++++++- arch/arm/mach-omap2/clock34xx.h | 1 - arch/arm/mach-omap2/timer-gp.c | 48 ++++++++++++++++++++++++++++-- arch/arm/plat-omap/dmtimer.c | 20 +++++++++---- arch/arm/plat-omap/include/mach/dmtimer.h | 2 +- arch/arm/plat-omap/include/mach/timer-gp.h | 17 +++++++++++ 8 files changed, 91 insertions(+), 12 deletions(-) create mode 100644 arch/arm/plat-omap/include/mach/timer-gp.h (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 744740ae1b9c..3a7a29d1f9a7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mmc-twl4030.h" @@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void) { omap2_init_common_hw(NULL); omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 5ea418327e89..efc59c49341b 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -66,6 +66,7 @@ struct omap_clk { static struct omap_clk omap24xx_clks[] = { /* external root sources */ CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 33c3e5b14323..88c5acb40fcf 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -625,6 +625,14 @@ static struct clk func_32k_ck = { .clkdm_name = "wkup_clkdm", }; +static struct clk secure_32k_ck = { + .name = "secure_32k_ck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, + .clkdm_name = "wkup_clkdm", +}; + /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ .name = "osc_ck", @@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = { static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_omap2_dflt_wait, - .parent = &func_32k_ck, + .parent = &secure_32k_ck, .clkdm_name = "core_l4_clkdm", .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), .enable_bit = OMAP24XX_EN_GPT12_SHIFT, diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index f0090175d597..6763b8f73028 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = { /* SECURE_32K_FCK clocks */ -/* XXX This clock no longer exists in 3430 TRM rev F */ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 9fc13a2cc3f4..7835048041eb 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -3,6 +3,8 @@ * * OMAP2 GP timer support. * + * Copyright (C) 2009 Nokia Corporation + * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. @@ -36,8 +38,13 @@ #include #include +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + static struct omap_dm_timer *gptimer; static struct clock_event_device clockevent_gpt; +static u8 __initdata gptimer_id = 1; +static u8 __initdata inited; static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) { @@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = { .set_mode = omap2_gp_timer_set_mode, }; +/** + * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents + * @id: GPTIMER to use (1..MAX_GPTIMER_ID) + * + * Define the GPTIMER that the system should use for the tick timer. + * Meant to be called from board-*.c files in the event that GPTIMER1, the + * default, is unsuitable. Returns -EINVAL on error or 0 on success. + */ +int __init omap2_gp_clockevent_set_gptimer(u8 id) +{ + if (id < 1 || id > MAX_GPTIMER_ID) + return -EINVAL; + + BUG_ON(inited); + + gptimer_id = id; + + return 0; +} + static void __init omap2_gp_clockevent_init(void) { u32 tick_rate; + int src; + + inited = 1; - gptimer = omap_dm_timer_request_specific(1); + gptimer = omap_dm_timer_request_specific(gptimer_id); BUG_ON(gptimer == NULL); #if defined(CONFIG_OMAP_32K_TIMER) - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); + src = OMAP_TIMER_SRC_32_KHZ; #else - omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK); + src = OMAP_TIMER_SRC_SYS_CLK; + WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " + "secure 32KiHz clock source\n"); #endif + + if (gptimer_id != 12) + WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), + "timer-gp: omap_dm_timer_set_source() failed\n"); + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); + pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", + gptimer_id, tick_rate); + omap2_gp_timer_irq.dev_id = (void *)gptimer; setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); @@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void) clockevents_register_device(&clockevent_gpt); } +/* Clocksource code */ + #ifdef CONFIG_OMAP_32K_TIMER /* * When 32k-timer is enabled, don't use GPTimer for clocksource diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a05205c12f7b..55bb99631292 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -509,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop); #ifdef CONFIG_ARCH_OMAP1 -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; u32 l; @@ -517,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n); l |= source << n; omap_writel(l, MOD_CONF_CTRL_1); + + return 0; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); #else -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { + int ret = -EINVAL; + if (source < 0 || source >= 3) - return; + return -EINVAL; clk_disable(timer->fclk); - clk_set_parent(timer->fclk, dm_source_clocks[source]); + ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); clk_enable(timer->fclk); - /* When the functional clock disappears, too quick writes seem to - * cause an abort. */ + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ __delay(150000); + + return ret; } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h index 6dc703138210..20f1054c0a80 100644 --- a/arch/arm/plat-omap/include/mach/dmtimer.h +++ b/arch/arm/plat-omap/include/mach/dmtimer.h @@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer); void omap_dm_timer_start(struct omap_dm_timer *timer); void omap_dm_timer_stop(struct omap_dm_timer *timer); -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); +int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h new file mode 100644 index 000000000000..c88d346b59d9 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/timer-gp.h @@ -0,0 +1,17 @@ +/* + * OMAP2/3 GPTIMER support.headers + * + * Copyright (C) 2009 Nokia Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H + +int __init omap2_gp_clockevent_set_gptimer(u8 id); + +#endif + -- cgit v1.2.3 From 644e28f3426810710b176080cc906995ebc24b63 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 23 Apr 2009 10:55:06 +0000 Subject: powerpc/44x: Correct memory size calculation for denali-based boards Some U-Boot versions incorrectly set the number of chipselects to two for Sequoia/Rainier boards while they only have one chipselect hardwired. This patch adds a workaround for this, hardcoding the number of chipselects to one for sequioa/rainer board models and reading the actual value from the memory controller register DDR0_10 otherwise. It also fixes another error in the way ibm4xx_denali_fixup_memsize calculates memory size. When testing the DDR_REDUC bit, the polarity is backwards. A "1" implies 32-bit wide memory while a "0" implies 64-bit wide memory. Signed-off-by: Mikhail Zolotaryov Signed-off-by: Valentine Barshak Signed-off-by: Steven A. Falco Acked-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/4xx.c | 56 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 5c878436f348..325b310573b9 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -158,21 +158,33 @@ void ibm440spe_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -void ibm4xx_denali_fixup_memsize(void) +/* + * Some U-Boot versions set the number of chipselects to two + * for Sequoia/Rainier boards while they only have one chipselect + * hardwired. Hardcode the number of chipselects to one + * for sequioa/rainer board models or read the actual value + * from the memory controller register DDR0_10 otherwise. + */ +static inline u32 ibm4xx_denali_get_cs(void) { - u32 val, max_cs, max_col, max_row; - u32 cs, col, row, bank, dpath; - unsigned long memsize; + void *devp; + char model[64]; + u32 val, cs; - val = SDRAM0_READ(DDR0_02); - if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) - fatal("DDR controller is not initialized\n"); + devp = finddevice("/"); + if (!devp) + goto read_cs; - /* get maximum cs col and row values */ - max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); - max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); - max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + if (getprop(devp, "model", model, sizeof(model)) <= 0) + goto read_cs; + model[sizeof(model)-1] = 0; + + if (!strcmp(model, "amcc,sequoia") || + !strcmp(model, "amcc,rainier")) + return 1; + +read_cs: /* get CS value */ val = SDRAM0_READ(DDR0_10); @@ -183,7 +195,25 @@ void ibm4xx_denali_fixup_memsize(void) cs++; val = val >> 1; } + return cs; +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = SDRAM0_READ(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + cs = ibm4xx_denali_get_cs(); if (!cs) fatal("No memory installed\n"); if (cs > max_cs) @@ -193,9 +223,9 @@ void ibm4xx_denali_fixup_memsize(void) val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) - dpath = 8; /* 64 bits */ - else dpath = 4; /* 32 bits */ + else + dpath = 8; /* 64 bits */ /* get address pins (rows) */ val = SDRAM0_READ(DDR0_42); -- cgit v1.2.3 From 5876ee950f28612814cc4e01c5549718f8b79dce Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 26 Apr 2009 13:56:01 +0100 Subject: [ARM] lart: fix build error arch/arm/mach-sa1100/lart.c:36: error: 'PAGE_SHIFT' undeclared here (not in a function) Signed-off-by: Russell King --- arch/arm/mach-sa1100/lart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 0cd52692d2f7..1f940df0e5af 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From a8f6faebaf5b3f0f56b7c12a4f99d97c56938b37 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 21 Apr 2009 14:39:07 +0800 Subject: [ARM] pxa: fix issue of muxed GPIO irq_chip functions touching non-muxed GPIOs pxa_gpio_irq_type() and pxa_unmask_muxed_gpio() will touch non-muxed GPIOs (0 and 1 on PXA2xx/PXA3xx) bits in GRERx and GFERx, which is incorrect. Actually, only those bits should get updated if the corresponding bits are set in c->irq_mask as well. Fix this by updating only those relevant bits. Reported-and-tested-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/plat-pxa/gpio.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index af819bf21b63..abc79d44acaa 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end) return -ENOMEM; } + memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip)); + for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) { struct gpio_chip *c = &chips[i].chip; @@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end) return 0; } +/* Update only those GRERx and GFERx edge detection register bits if those + * bits are set in c->irq_mask + */ +static inline void update_edge_detect(struct pxa_gpio_chip *c) +{ + uint32_t grer, gfer; + + grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask; + gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask; + grer |= c->irq_edge_rise & c->irq_mask; + gfer |= c->irq_edge_fall & c->irq_mask; + __raw_writel(grer, c->regbase + GRER_OFFSET); + __raw_writel(gfer, c->regbase + GFER_OFFSET); +} + static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) { struct pxa_gpio_chip *c; @@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) else c->irq_edge_fall &= ~mask; - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""), @@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) struct pxa_gpio_chip *c = gpio_to_chip(gpio); c->irq_mask |= GPIO_bit(gpio); - __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET); - __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET); + update_edge_detect(c); } static struct irq_chip pxa_muxed_gpio_chip = { -- cgit v1.2.3 From fd87e081723089cba99df0b3d6f36ae2235c700a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 16 Apr 2009 11:23:08 +0200 Subject: [ARM] pxa: remove duplicate select statements from Kconfig ARCH_PXA selects HAVE_CLK and COMMON_CLKDEV twice in arch/arm/Kconfig. Remove the second entry. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/Kconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e02b893fb909..9909a93ec7fd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -486,8 +486,6 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT -- cgit v1.2.3 From 36b5437f33fb95196bef2345dede39fdcab3e431 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Apr 2009 11:37:10 +0200 Subject: [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as CPU_FREQ is enabled. Signed-off-by: Philipp Zabel Signed-off-by: Eric Miao --- arch/arm/Kconfig | 6 ------ arch/arm/configs/viper_defconfig | 1 - 2 files changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9909a93ec7fd..fb667cd43f70 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1169,12 +1169,6 @@ config CPU_FREQ_IMX If in doubt, say N. -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - endif source "drivers/cpuidle/Kconfig" diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 30f463d2fa8a..6ab5dd5868de 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PXA=y # # Floating point emulation -- cgit v1.2.3 From 3e36c0deea118e277f4ff9fa947bcde5f88426ca Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Feb 2009 16:49:23 +0800 Subject: [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC Signed-off-by: Eric Miao --- arch/arm/mach-pxa/corgi.c | 10 ++++++++++ arch/arm/mach-pxa/spitz.c | 10 ++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index cdf21dd135b4..930e364ccde9 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = { .num_chipselect = 3, }; +static void corgi_wait_for_hsync(void) +{ + while (gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(CORGI_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data corgi_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = CORGI_GPIO_TP_INT, + .wait_for_sync = corgi_wait_for_hsync, }; static void corgi_ads7846_cs(u32 command) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8c61ddac119e..c18e34acafcb 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = { .num_chipselect = 3, }; +static void spitz_wait_for_hsync(void) +{ + while (gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); + + while (!gpio_get_value(SPITZ_GPIO_HSYNC)) + cpu_relax(); +} + static struct ads7846_platform_data spitz_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, .x_plate_ohms = 419, .y_plate_ohms = 486, .gpio_pendown = SPITZ_GPIO_TP_INT, + .wait_for_sync = spitz_wait_for_hsync, }; static void spitz_ads7846_cs(u32 command) -- cgit v1.2.3 From 15fbc938576175eeb53798221f045d4ace52e5dc Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:34:36 +0800 Subject: [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd codec but unused on the board, yet they are initialized incorrectly by the bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to work. Fix this issue by configuring these pins as normal GPIO to avoid the noise from these pins being treated as signals from the 2nd codec. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zylonite_pxa300.c | 1 + arch/arm/mach-pxa/zylonite_pxa320.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index c1f73205d078..e99555b76a08 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { GPIO25_AC97_SDATA_IN_0, GPIO27_AC97_SDATA_OUT, GPIO28_AC97_SYNC, + GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO91_SSP3_SCLK, diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 4e1c488c6906..cc5a22833605 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = { GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET, + GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */ /* SSP3 */ GPIO89_SSP3_SCLK, -- cgit v1.2.3 From b49e385fc7cb4e6ed4206dfdab2b2579c5076120 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 22 Apr 2009 18:38:40 +0800 Subject: [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders Signed-off-by: Eric Miao --- arch/arm/mach-pxa/zylonite_pxa300.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index e99555b76a08..c256c57642c0 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -127,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = { /* Standard I2C */ GPIO21_I2C_SCL, GPIO22_I2C_SDA, + + /* GPIO */ + GPIO18_GPIO, /* GPIO Expander #0 INT_N */ + GPIO19_GPIO, /* GPIO Expander #1 INT_N */ }; static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { -- cgit v1.2.3 From fc76132b1e72efe45b5a5a693caadd54c3037f55 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 13 Apr 2009 11:06:49 +0800 Subject: [ARM] pxa/littleton: add missing da9034 touchscreen support Signed-off-by: Eric Miao --- arch/arm/mach-pxa/littleton.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e13f6a81c223..c872b9feb4d4 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = { }, }; +static struct da9034_touch_pdata littleton_da9034_touch = { + .x_inverted = 1, + .interval_ms = 20, +}; + static struct da903x_subdev_info littleton_da9034_subdevs[] = { { .name = "da903x-led", @@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = { }, { .name = "da903x-backlight", .id = DA9034_ID_WLED, + }, { + .name = "da9034-touch", + .id = DA9034_ID_TOUCH, + .platform_data = &littleton_da9034_touch, }, }; -- cgit v1.2.3 From e60990023cac11bc6185e7a7f1007fbbb8d30e4d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:06:37 -0500 Subject: davinci: timers: use clk_get_rate() Use clock framework instead of hard-coded CLOCK_TICK_RATE for determining timer tick frequencies. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/time.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 88864ae067b8..494e01bff5c3 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -31,6 +31,7 @@ #include "clock.h" static struct clock_event_device clockevent_davinci; +static unsigned int davinci_clock_tick_rate; #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) @@ -282,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - t->period = CLOCK_TICK_RATE / (HZ); + t->period = davinci_clock_tick_rate / (HZ); t->opts = TIMER_OPTS_PERIODIC; timer32_config(t); break; @@ -309,21 +310,29 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { + struct clk *timer_clk; + static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; /* init timer hw */ timer_init(); + timer_clk = clk_get(NULL, "timer0"); + BUG_ON(IS_ERR(timer_clk)); + clk_enable(timer_clk); + + davinci_clock_tick_rate = clk_get_rate(timer_clk); + /* setup clocksource */ clocksource_davinci.mult = - clocksource_khz2mult(CLOCK_TICK_RATE/1000, + clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); if (clocksource_register(&clocksource_davinci)) printk(err, clocksource_davinci.name); /* setup clockevent */ - clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, + clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); @@ -343,6 +352,15 @@ struct sys_timer davinci_timer = { void davinci_watchdog_reset(void) { u32 tgcr, wdtcr; void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct device dev; + struct clk *wd_clk; + char *name = "watchdog"; + + dev_set_name(&dev, name); + wd_clk = clk_get(&dev, NULL); + if (WARN_ON(IS_ERR(wd_clk))) + return; + clk_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); -- cgit v1.2.3 From a4768d2275cb7c0d2a665b9ad4de07834be0714b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 07:18:14 -0500 Subject: davinci: add EDMA driver Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov Cc: Sudhakar Rajashekhara Cc: Troy Kisky Cc: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/dma.c | 1135 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/edma.h | 228 ++++++ 3 files changed, 1364 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-davinci/dma.c create mode 100644 arch/arm/mach-davinci/include/mach/edma.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 4dc458597f40..3ee3d73d9566 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o usb.o + gpio.o mux.o devices.o dma.o usb.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c new file mode 100644 index 000000000000..15e9eb158bb7 --- /dev/null +++ b/arch/arm/mach-davinci/dma.c @@ -0,0 +1,1135 @@ +/* + * EDMA3 support for DaVinci + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + + +/* Offsets matching "struct edmacc_param" */ +#define PARM_OPT 0x00 +#define PARM_SRC 0x04 +#define PARM_A_B_CNT 0x08 +#define PARM_DST 0x0c +#define PARM_SRC_DST_BIDX 0x10 +#define PARM_LINK_BCNTRLD 0x14 +#define PARM_SRC_DST_CIDX 0x18 +#define PARM_CCNT 0x1c + +#define PARM_SIZE 0x20 + +/* Offsets for EDMA CC global channel registers and their shadows */ +#define SH_ER 0x00 /* 64 bits */ +#define SH_ECR 0x08 /* 64 bits */ +#define SH_ESR 0x10 /* 64 bits */ +#define SH_CER 0x18 /* 64 bits */ +#define SH_EER 0x20 /* 64 bits */ +#define SH_EECR 0x28 /* 64 bits */ +#define SH_EESR 0x30 /* 64 bits */ +#define SH_SER 0x38 /* 64 bits */ +#define SH_SECR 0x40 /* 64 bits */ +#define SH_IER 0x50 /* 64 bits */ +#define SH_IECR 0x58 /* 64 bits */ +#define SH_IESR 0x60 /* 64 bits */ +#define SH_IPR 0x68 /* 64 bits */ +#define SH_ICR 0x70 /* 64 bits */ +#define SH_IEVAL 0x78 +#define SH_QER 0x80 +#define SH_QEER 0x84 +#define SH_QEECR 0x88 +#define SH_QEESR 0x8c +#define SH_QSER 0x90 +#define SH_QSECR 0x94 +#define SH_SIZE 0x200 + +/* Offsets for EDMA CC global registers */ +#define EDMA_REV 0x0000 +#define EDMA_CCCFG 0x0004 +#define EDMA_QCHMAP 0x0200 /* 8 registers */ +#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */ +#define EDMA_QDMAQNUM 0x0260 +#define EDMA_QUETCMAP 0x0280 +#define EDMA_QUEPRI 0x0284 +#define EDMA_EMR 0x0300 /* 64 bits */ +#define EDMA_EMCR 0x0308 /* 64 bits */ +#define EDMA_QEMR 0x0310 +#define EDMA_QEMCR 0x0314 +#define EDMA_CCERR 0x0318 +#define EDMA_CCERRCLR 0x031c +#define EDMA_EEVAL 0x0320 +#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/ +#define EDMA_QRAE 0x0380 /* 4 registers */ +#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */ +#define EDMA_QSTAT 0x0600 /* 2 registers */ +#define EDMA_QWMTHRA 0x0620 +#define EDMA_QWMTHRB 0x0624 +#define EDMA_CCSTAT 0x0640 + +#define EDMA_M 0x1000 /* global channel registers */ +#define EDMA_ECR 0x1008 +#define EDMA_ECRH 0x100C +#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */ +#define EDMA_PARM 0x4000 /* 128 param entries */ + +#define DAVINCI_DMA_3PCC_BASE 0x01C00000 + +#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) + +#define EDMA_MAX_DMACH 64 +#define EDMA_MAX_PARAMENTRY 512 +#define EDMA_MAX_EVQUE 2 /* FIXME too small */ + + +/*****************************************************************************/ + +static void __iomem *edmacc_regs_base; + +static inline unsigned int edma_read(int offset) +{ + return (unsigned int)__raw_readl(edmacc_regs_base + offset); +} + +static inline void edma_write(int offset, int val) +{ + __raw_writel(val, edmacc_regs_base + offset); +} +static inline void edma_modify(int offset, unsigned and, unsigned or) +{ + unsigned val = edma_read(offset); + val &= and; + val |= or; + edma_write(offset, val); +} +static inline void edma_and(int offset, unsigned and) +{ + unsigned val = edma_read(offset); + val &= and; + edma_write(offset, val); +} +static inline void edma_or(int offset, unsigned or) +{ + unsigned val = edma_read(offset); + val |= or; + edma_write(offset, val); +} +static inline unsigned int edma_read_array(int offset, int i) +{ + return edma_read(offset + (i << 2)); +} +static inline void edma_write_array(int offset, int i, unsigned val) +{ + edma_write(offset + (i << 2), val); +} +static inline void edma_modify_array(int offset, int i, + unsigned and, unsigned or) +{ + edma_modify(offset + (i << 2), and, or); +} +static inline void edma_or_array(int offset, int i, unsigned or) +{ + edma_or(offset + (i << 2), or); +} +static inline void edma_or_array2(int offset, int i, int j, unsigned or) +{ + edma_or(offset + ((i*2 + j) << 2), or); +} +static inline void edma_write_array2(int offset, int i, int j, unsigned val) +{ + edma_write(offset + ((i*2 + j) << 2), val); +} +static inline unsigned int edma_shadow0_read(int offset) +{ + return edma_read(EDMA_SHADOW0 + offset); +} +static inline unsigned int edma_shadow0_read_array(int offset, int i) +{ + return edma_read(EDMA_SHADOW0 + offset + (i << 2)); +} +static inline void edma_shadow0_write(int offset, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset, val); +} +static inline void edma_shadow0_write_array(int offset, int i, unsigned val) +{ + edma_write(EDMA_SHADOW0 + offset + (i << 2), val); +} +static inline unsigned int edma_parm_read(int offset, int param_no) +{ + return edma_read(EDMA_PARM + offset + (param_no << 5)); +} +static inline void edma_parm_write(int offset, int param_no, unsigned val) +{ + edma_write(EDMA_PARM + offset + (param_no << 5), val); +} +static inline void edma_parm_modify(int offset, int param_no, + unsigned and, unsigned or) +{ + edma_modify(EDMA_PARM + offset + (param_no << 5), and, or); +} +static inline void edma_parm_and(int offset, int param_no, unsigned and) +{ + edma_and(EDMA_PARM + offset + (param_no << 5), and); +} +static inline void edma_parm_or(int offset, int param_no, unsigned or) +{ + edma_or(EDMA_PARM + offset + (param_no << 5), or); +} + +/*****************************************************************************/ + +/* actual number of DMA channels and slots on this silicon */ +static unsigned num_channels; +static unsigned num_slots; + +static struct dma_interrupt_data { + void (*callback)(unsigned channel, unsigned short ch_status, + void *data); + void *data; +} intr_data[EDMA_MAX_DMACH]; + +/* The edma_inuse bit for each PaRAM slot is clear unless the + * channel is in use ... by ARM or DSP, for QDMA, or whatever. + */ +static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); + +/* The edma_noevent bit for each channel is clear unless + * it doesn't trigger DMA events on this platform. It uses a + * bit of SOC-specific initialization code. + */ +static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + +/* dummy param set used to (re)initialize parameter RAM slots */ +static const struct edmacc_param dummy_paramset = { + .link_bcntrld = 0xffff, + .ccnt = 1, +}; + +static const int __initconst +queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = { +/* {event queue no, TC no} */ + {0, 0}, + {1, 1}, + {-1, -1} +}; + +static const int __initconst +queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {1, 7}, + {-1, -1} +}; + +/*****************************************************************************/ + +static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no) +{ + int bit = (ch_no & 0x7) * 4; + + /* default to low priority queue */ + if (queue_no == EVENTQ_DEFAULT) + queue_no = EVENTQ_1; + + queue_no &= 7; + edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3), + ~(0x7 << bit), queue_no << bit); +} + +static void __init map_queue_tc(int queue_no, int tc_no) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); +} + +static void __init assign_priority_to_queue(int queue_no, int priority) +{ + int bit = queue_no * 4; + edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit)); +} + +static inline void +setup_dma_interrupt(unsigned lch, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data) +{ + if (!callback) { + edma_shadow0_write_array(SH_IECR, lch >> 5, + (1 << (lch & 0x1f))); + } + + intr_data[lch].callback = callback; + intr_data[lch].data = data; + + if (callback) { + edma_shadow0_write_array(SH_ICR, lch >> 5, + (1 << (lch & 0x1f))); + edma_shadow0_write_array(SH_IESR, lch >> 5, + (1 << (lch & 0x1f))); + } +} + +/****************************************************************************** + * + * DMA interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_irq_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_irq_handler\n"); + + if ((edma_shadow0_read_array(SH_IPR, 0) == 0) + && (edma_shadow0_read_array(SH_IPR, 1) == 0)) + return IRQ_NONE; + + while (1) { + int j; + if (edma_shadow0_read_array(SH_IPR, 0)) + j = 0; + else if (edma_shadow0_read_array(SH_IPR, 1)) + j = 1; + else + break; + dev_dbg(data, "IPR%d %08x\n", j, + edma_shadow0_read_array(SH_IPR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_shadow0_write_array(SH_ICR, j, (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, DMA_COMPLETE, + intr_data[k].data); + } + } + } + cnt++; + if (cnt > 10) + break; + } + edma_shadow0_write(SH_IEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * DMA error interrupt handler + * + *****************************************************************************/ +static irqreturn_t dma_ccerr_handler(int irq, void *data) +{ + int i; + unsigned int cnt = 0; + + dev_dbg(data, "dma_ccerr_handler\n"); + + if ((edma_read_array(EDMA_EMR, 0) == 0) && + (edma_read_array(EDMA_EMR, 1) == 0) && + (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0)) + return IRQ_NONE; + + while (1) { + int j = -1; + if (edma_read_array(EDMA_EMR, 0)) + j = 0; + else if (edma_read_array(EDMA_EMR, 1)) + j = 1; + if (j >= 0) { + dev_dbg(data, "EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + for (i = 0; i < 32; i++) { + int k = (j << 5) + i; + if (edma_read_array(EDMA_EMR, j) & (1 << i)) { + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, 1 << i); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, + (1 << i)); + if (intr_data[k].callback) { + intr_data[k].callback(k, + DMA_CC_ERROR, + intr_data + [k].data); + } + } + } + } else if (edma_read(EDMA_QEMR)) { + dev_dbg(data, "QEMR %02x\n", + edma_read(EDMA_QEMR)); + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_QEMR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_QEMCR, 1 << i); + edma_shadow0_write(SH_QSECR, (1 << i)); + + /* NOTE: not reported!! */ + } + } + } else if (edma_read(EDMA_CCERR)) { + dev_dbg(data, "CCERR %08x\n", + edma_read(EDMA_CCERR)); + /* FIXME: CCERR.BIT(16) ignored! much better + * to just write CCERRCLR with CCERR value... + */ + for (i = 0; i < 8; i++) { + if (edma_read(EDMA_CCERR) & (1 << i)) { + /* Clear the corresponding IPR bits */ + edma_write(EDMA_CCERRCLR, 1 << i); + + /* NOTE: not reported!! */ + } + } + } + if ((edma_read_array(EDMA_EMR, 0) == 0) + && (edma_read_array(EDMA_EMR, 1) == 0) + && (edma_read(EDMA_QEMR) == 0) + && (edma_read(EDMA_CCERR) == 0)) { + break; + } + cnt++; + if (cnt > 10) + break; + } + edma_write(EDMA_EEVAL, 1); + return IRQ_HANDLED; +} + +/****************************************************************************** + * + * Transfer controller error interrupt handlers + * + *****************************************************************************/ + +#define tc_errs_handled false /* disabled as long as they're NOPs */ + +static irqreturn_t dma_tc0err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc0err_handler\n"); + return IRQ_HANDLED; +} + +static irqreturn_t dma_tc1err_handler(int irq, void *data) +{ + dev_dbg(data, "dma_tc1err_handler\n"); + return IRQ_HANDLED; +} + +/*-----------------------------------------------------------------------*/ + +/* Resource alloc/free: dma channels, parameter RAM slots */ + +/** + * edma_alloc_channel - allocate DMA channel and paired parameter RAM + * @channel: specific channel to allocate; negative for "any unmapped channel" + * @callback: optional; to be issued on DMA completion or errors + * @data: passed to callback + * @eventq_no: an EVENTQ_* constant, used to choose which Transfer + * Controller (TC) executes requests using this channel. Use + * EVENTQ_DEFAULT unless you really need a high priority queue. + * + * This allocates a DMA channel and its associated parameter RAM slot. + * The parameter RAM is initialized to hold a dummy transfer. + * + * Normal use is to pass a specific channel number as @channel, to make + * use of hardware events mapped to that channel. When the channel will + * be used only for software triggering or event chaining, channels not + * mapped to hardware events (or mapped to unused events) are preferable. + * + * DMA transfers start from a channel using edma_start(), or by + * chaining. When the transfer described in that channel's parameter RAM + * slot completes, that slot's data may be reloaded through a link. + * + * DMA errors are only reported to the @callback associated with the + * channel driving that transfer, but transfer completion callbacks can + * be sent to another channel under control of the TCC field in + * the option word of the transfer's parameter RAM set. Drivers must not + * use DMA transfer completion callbacks for channels they did not allocate. + * (The same applies to TCC codes used in transfer chaining.) + * + * Returns the number of the channel, else negative errno. + */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, + enum dma_event_q eventq_no) +{ + if (channel < 0) { + channel = 0; + for (;;) { + channel = find_next_bit(edma_noevent, + num_channels, channel); + if (channel == num_channels) + return -ENOMEM; + if (!test_and_set_bit(channel, edma_inuse)) + break; + channel++; + } + } else if (channel >= num_channels) { + return -EINVAL; + } else if (test_and_set_bit(channel, edma_inuse)) { + return -EBUSY; + } + + /* ensure access through shadow region 0 */ + edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f)); + + /* ensure no events are pending */ + edma_stop(channel); + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + + if (callback) + setup_dma_interrupt(channel, callback, data); + + map_dmach_queue(channel, eventq_no); + + return channel; +} +EXPORT_SYMBOL(edma_alloc_channel); + + +/** + * edma_free_channel - deallocate DMA channel + * @channel: dma channel returned from edma_alloc_channel() + * + * This deallocates the DMA channel and associated parameter RAM slot + * allocated by edma_alloc_channel(). + * + * Callers are responsible for ensuring the channel is inactive, and + * will not be reactivated by linking, chaining, or software calls to + * edma_start(). + */ +void edma_free_channel(unsigned channel) +{ + if (channel >= num_channels) + return; + + setup_dma_interrupt(channel, NULL, NULL); + /* REVISIT should probably take out of shadow region 0 */ + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel), + &dummy_paramset, PARM_SIZE); + clear_bit(channel, edma_inuse); +} +EXPORT_SYMBOL(edma_free_channel); + +/** + * edma_alloc_slot - allocate DMA parameter RAM + * @slot: specific slot to allocate; negative for "any unused slot" + * + * This allocates a parameter RAM slot, initializing it to hold a + * dummy transfer. Slots allocated using this routine have not been + * mapped to a hardware DMA channel, and will normally be used by + * linking to them from a slot associated with a DMA channel. + * + * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific + * slots may be allocated on behalf of DSP firmware. + * + * Returns the number of the slot, else negative errno. + */ +int edma_alloc_slot(int slot) +{ + if (slot < 0) { + slot = num_channels; + for (;;) { + slot = find_next_zero_bit(edma_inuse, + num_slots, slot); + if (slot == num_slots) + return -ENOMEM; + if (!test_and_set_bit(slot, edma_inuse)) + break; + } + } else if (slot < num_channels || slot >= num_slots) { + return -EINVAL; + } else if (test_and_set_bit(slot, edma_inuse)) { + return -EBUSY; + } + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + + return slot; +} +EXPORT_SYMBOL(edma_alloc_slot); + +/** + * edma_free_slot - deallocate DMA parameter RAM + * @slot: parameter RAM slot returned from edma_alloc_slot() + * + * This deallocates the parameter RAM slot allocated by edma_alloc_slot(). + * Callers are responsible for ensuring the slot is inactive, and will + * not be activated. + */ +void edma_free_slot(unsigned slot) +{ + if (slot < num_channels || slot >= num_slots) + return; + + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), + &dummy_paramset, PARM_SIZE); + clear_bit(slot, edma_inuse); +} +EXPORT_SYMBOL(edma_free_slot); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (i) -- read/write partial slots */ + +/** + * edma_set_src - set initial DMA source address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma_set_src_index(). + */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set SAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8)); + } else { + /* clear SAM */ + i &= ~SAM; + } + edma_parm_write(PARM_OPT, slot, i); + + /* set the source port address + in source register of param structure */ + edma_parm_write(PARM_SRC, slot, src_port); + } +} +EXPORT_SYMBOL(edma_set_src); + +/** + * edma_set_dest - set initial DMA destination address in parameter RAM slot + * @slot: parameter RAM slot being configured + * @dest_port: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma_set_dest_index(). + */ +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width width) +{ + if (slot < num_slots) { + unsigned int i = edma_parm_read(PARM_OPT, slot); + + if (mode) { + /* set DAM and program FWID */ + i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8)); + } else { + /* clear DAM */ + i &= ~DAM; + } + edma_parm_write(PARM_OPT, slot, i); + /* set the destination port address + in dest register of param structure */ + edma_parm_write(PARM_DST, slot, dest_port); + } +} +EXPORT_SYMBOL(edma_set_dest); + +/** + * edma_get_position - returns the current transfer points + * @slot: parameter RAM slot being examined + * @src: pointer to source port position + * @dst: pointer to destination port position + * + * Returns current source and destination addresses for a particular + * parameter RAM slot. Its channel should not be active when this is called. + */ +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +{ + struct edmacc_param temp; + + edma_read_slot(slot, &temp); + if (src != NULL) + *src = temp.src; + if (dst != NULL) + *dst = temp.dst; +} +EXPORT_SYMBOL(edma_get_position); + +/** + * edma_set_src_index - configure DMA source address indexing + * @slot: parameter RAM slot being configured + * @src_bidx: byte offset between source arrays in a frame + * @src_cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0xffff0000, src_bidx); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0xffff0000, src_cidx); + } +} +EXPORT_SYMBOL(edma_set_src_index); + +/** + * edma_set_dest_index - configure DMA destination address indexing + * @slot: parameter RAM slot being configured + * @dest_bidx: byte offset between destination arrays in a frame + * @dest_cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_SRC_DST_BIDX, slot, + 0x0000ffff, dest_bidx << 16); + edma_parm_modify(PARM_SRC_DST_CIDX, slot, + 0x0000ffff, dest_cidx << 16); + } +} +EXPORT_SYMBOL(edma_set_dest_index); + +/** + * edma_set_transfer_params - configure DMA transfer parameters + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma_set_transfer_params(unsigned slot, + u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode) +{ + if (slot < num_slots) { + edma_parm_modify(PARM_LINK_BCNTRLD, slot, + 0x0000ffff, bcnt_rld << 16); + if (sync_mode == ASYNC) + edma_parm_and(PARM_OPT, slot, ~SYNCDIM); + else + edma_parm_or(PARM_OPT, slot, SYNCDIM); + /* Set the acount, bcount, ccount registers */ + edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt); + edma_parm_write(PARM_CCNT, slot, ccnt); + } +} +EXPORT_SYMBOL(edma_set_transfer_params); + +/** + * edma_link - link one parameter RAM slot to another + * @from: parameter RAM slot originating the link + * @to: parameter RAM slot which is the link target + * + * The originating slot should not be part of any active DMA transfer. + */ +void edma_link(unsigned from, unsigned to) +{ + if (from >= num_slots) + return; + if (to >= num_slots) + return; + edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to)); +} +EXPORT_SYMBOL(edma_link); + +/** + * edma_unlink - cut link from one parameter RAM slot + * @from: parameter RAM slot originating the link + * + * The originating slot should not be part of any active DMA transfer. + * Its link is set to 0xffff. + */ +void edma_unlink(unsigned from) +{ + if (from >= num_slots) + return; + edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff); +} +EXPORT_SYMBOL(edma_unlink); + +/*-----------------------------------------------------------------------*/ + +/* Parameter RAM operations (ii) -- read/write whole parameter sets */ + +/** + * edma_write_slot - write parameter RAM data for slot + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma_write_slot(unsigned slot, const struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE); +} +EXPORT_SYMBOL(edma_write_slot); + +/** + * edma_read_slot - read parameter RAM data from slot + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma_read_slot(unsigned slot, struct edmacc_param *param) +{ + if (slot >= num_slots) + return; + memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE); +} +EXPORT_SYMBOL(edma_read_slot); + +/*-----------------------------------------------------------------------*/ + +/* Various EDMA channel control operations */ + +/** + * edma_pause - pause dma on a channel + * @channel: on which edma_start() has been called + * + * This temporarily disables EDMA hardware events on the specified channel, + * preventing them from triggering new transfers on its behalf + */ +void edma_pause(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_pause); + +/** + * edma_resume - resumes dma on a paused channel + * @channel: on which edma_pause() has been called + * + * This re-enables EDMA hardware events on the specified channel. + */ +void edma_resume(unsigned channel) +{ + if (channel < num_channels) { + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EESR, channel >> 5, mask); + } +} +EXPORT_SYMBOL(edma_resume); + +/** + * edma_start - start dma on a channel + * @channel: channel being activated + * + * Channels with event associations will be triggered by their hardware + * events, and channels without such associations will be triggered by + * software. (At this writing there is no interface for using software + * triggers except with channels that don't support hardware triggers.) + * + * Returns zero on success, else negative errno. + */ +int edma_start(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + /* EDMA channels without event association */ + if (test_bit(channel, edma_noevent)) { + pr_debug("EDMA: ESR%d %08x\n", j, + edma_shadow0_read_array(SH_ESR, j)); + edma_shadow0_write_array(SH_ESR, j, mask); + return 0; + } + + /* EDMA channel with event association */ + pr_debug("EDMA: ER%d %08x\n", j, + edma_shadow0_read_array(SH_ER, j)); + /* Clear any pending error */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_shadow0_write_array(SH_EESR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + return 0; + } + + return -EINVAL; +} +EXPORT_SYMBOL(edma_start); + +/** + * edma_stop - stops dma on the channel passed + * @channel: channel being deactivated + * + * When @lch is a channel, any active transfer is paused and + * all pending hardware events are cleared. The current transfer + * may not be resumed, and the channel's Parameter RAM should be + * reinitialized before being reused. + */ +void edma_stop(unsigned channel) +{ + if (channel < num_channels) { + int j = channel >> 5; + unsigned int mask = (1 << (channel & 0x1f)); + + edma_shadow0_write_array(SH_EECR, j, mask); + edma_shadow0_write_array(SH_ECR, j, mask); + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write_array(EDMA_EMCR, j, mask); + + pr_debug("EDMA: EER%d %08x\n", j, + edma_shadow0_read_array(SH_EER, j)); + + /* REVISIT: consider guarding against inappropriate event + * chaining by overwriting with dummy_paramset. + */ + } +} +EXPORT_SYMBOL(edma_stop); + +/****************************************************************************** + * + * It cleans ParamEntry qand bring back EDMA to initial state if media has + * been removed before EDMA has finished.It is usedful for removable media. + * Arguments: + * ch_no - channel no + * + * Return: zero on success, or corresponding error no on failure + * + * FIXME this should not be needed ... edma_stop() should suffice. + * + *****************************************************************************/ + +void edma_clean_channel(unsigned channel) +{ + if (channel < num_channels) { + int j = (channel >> 5); + unsigned int mask = 1 << (channel & 0x1f); + + pr_debug("EDMA: EMR%d %08x\n", j, + edma_read_array(EDMA_EMR, j)); + edma_shadow0_write_array(SH_ECR, j, mask); + /* Clear the corresponding EMR bits */ + edma_write_array(EDMA_EMCR, j, mask); + /* Clear any SER */ + edma_shadow0_write_array(SH_SECR, j, mask); + edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3); + } +} +EXPORT_SYMBOL(edma_clean_channel); + +/* + * edma_clear_event - clear an outstanding event on the DMA channel + * Arguments: + * channel - channel number + */ +void edma_clear_event(unsigned channel) +{ + if (channel >= num_channels) + return; + if (channel < 32) + edma_write(EDMA_ECR, 1 << channel); + else + edma_write(EDMA_ECRH, 1 << (channel - 32)); +} +EXPORT_SYMBOL(edma_clear_event); + +/*-----------------------------------------------------------------------*/ + +static int __init edma_probe(struct platform_device *pdev) +{ + struct edma_soc_info *info = pdev->dev.platform_data; + int i; + int status; + const s8 *noevent; + int irq = 0, err_irq = 0; + struct resource *r; + resource_size_t len; + + if (!info) + return -ENODEV; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc"); + if (!r) + return -ENODEV; + + len = r->end - r->start + 1; + + r = request_mem_region(r->start, len, r->name); + if (!r) + return -EBUSY; + + edmacc_regs_base = ioremap(r->start, len); + if (!edmacc_regs_base) { + status = -EBUSY; + goto fail1; + } + + num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH); + num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY); + + dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base); + + for (i = 0; i < num_slots; i++) + memcpy_toio(edmacc_regs_base + PARM_OFFSET(i), + &dummy_paramset, PARM_SIZE); + + noevent = info->noevent; + if (noevent) { + while (*noevent != -1) + set_bit(*noevent++, edma_noevent); + } + + irq = platform_get_irq(pdev, 0); + status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + irq, status); + goto fail; + } + + err_irq = platform_get_irq(pdev, 1); + status = request_irq(err_irq, dma_ccerr_handler, 0, + "edma_error", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + err_irq, status); + goto fail; + } + + if (tc_errs_handled) { + status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0, + "edma_tc0", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n", + IRQ_TCERRINT0, status); + return status; + } + status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0, + "edma_tc1", &pdev->dev); + if (status < 0) { + dev_dbg(&pdev->dev, "request_irq %d --> %d\n", + IRQ_TCERRINT, status); + return status; + } + } + + /* Everything lives on transfer controller 1 until otherwise specified. + * This way, long transfers on the low priority queue + * started by the codec engine will not cause audio defects. + */ + for (i = 0; i < num_channels; i++) + map_dmach_queue(i, EVENTQ_1); + + /* Event queue to TC mapping */ + for (i = 0; queue_tc_mapping[i][0] != -1; i++) + map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]); + + /* Event queue priority mapping */ + for (i = 0; queue_priority_mapping[i][0] != -1; i++) + assign_priority_to_queue(queue_priority_mapping[i][0], + queue_priority_mapping[i][1]); + + for (i = 0; i < info->n_region; i++) { + edma_write_array2(EDMA_DRAE, i, 0, 0x0); + edma_write_array2(EDMA_DRAE, i, 1, 0x0); + edma_write_array(EDMA_QRAE, i, 0x0); + } + + return 0; + +fail: + if (err_irq) + free_irq(err_irq, NULL); + if (irq) + free_irq(irq, NULL); + iounmap(edmacc_regs_base); +fail1: + release_mem_region(r->start, len); + return status; +} + + +static struct platform_driver edma_driver = { + .driver.name = "edma", +}; + +static int __init edma_init(void) +{ + return platform_driver_probe(&edma_driver, edma_probe); +} +arch_initcall(edma_init); + diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h new file mode 100644 index 000000000000..f6fc5396dafc --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -0,0 +1,228 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +#define CCINT0_INTERRUPT 16 +#define CCERRINT_INTERRUPT 17 +#define TCERRINT0_INTERRUPT 18 +#define TCERRINT1_INTERRUPT 19 + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +#define TRWORD (0x7<<2) +#define PAENTRY (0x1ff<<5) + +/* Drivers should avoid using these symbolic names for dm644x + * channels, and use platform_device IORESOURCE_DMA resources + * instead. (Other DaVinci chips have different peripherals + * and thus have different DMA channel mappings.) + */ +#define DAVINCI_DMA_MCBSP_TX 2 +#define DAVINCI_DMA_MCBSP_RX 3 +#define DAVINCI_DMA_VPSS_HIST 4 +#define DAVINCI_DMA_VPSS_H3A 5 +#define DAVINCI_DMA_VPSS_PRVU 6 +#define DAVINCI_DMA_VPSS_RSZ 7 +#define DAVINCI_DMA_IMCOP_IMXINT 8 +#define DAVINCI_DMA_IMCOP_VLCDINT 9 +#define DAVINCI_DMA_IMCO_PASQINT 10 +#define DAVINCI_DMA_IMCOP_DSQINT 11 +#define DAVINCI_DMA_SPI_SPIX 16 +#define DAVINCI_DMA_SPI_SPIR 17 +#define DAVINCI_DMA_UART0_URXEVT0 18 +#define DAVINCI_DMA_UART0_UTXEVT0 19 +#define DAVINCI_DMA_UART1_URXEVT1 20 +#define DAVINCI_DMA_UART1_UTXEVT1 21 +#define DAVINCI_DMA_UART2_URXEVT2 22 +#define DAVINCI_DMA_UART2_UTXEVT2 23 +#define DAVINCI_DMA_MEMSTK_MSEVT 24 +#define DAVINCI_DMA_MMCRXEVT 26 +#define DAVINCI_DMA_MMCTXEVT 27 +#define DAVINCI_DMA_I2C_ICREVT 28 +#define DAVINCI_DMA_I2C_ICXEVT 29 +#define DAVINCI_DMA_GPIO_GPINT0 32 +#define DAVINCI_DMA_GPIO_GPINT1 33 +#define DAVINCI_DMA_GPIO_GPINT2 34 +#define DAVINCI_DMA_GPIO_GPINT3 35 +#define DAVINCI_DMA_GPIO_GPINT4 36 +#define DAVINCI_DMA_GPIO_GPINT5 37 +#define DAVINCI_DMA_GPIO_GPINT6 38 +#define DAVINCI_DMA_GPIO_GPINT7 39 +#define DAVINCI_DMA_GPIO_GPBNKINT0 40 +#define DAVINCI_DMA_GPIO_GPBNKINT1 41 +#define DAVINCI_DMA_GPIO_GPBNKINT2 42 +#define DAVINCI_DMA_GPIO_GPBNKINT3 43 +#define DAVINCI_DMA_GPIO_GPBNKINT4 44 +#define DAVINCI_DMA_TIMER0_TINT0 48 +#define DAVINCI_DMA_TIMER1_TINT1 49 +#define DAVINCI_DMA_TIMER2_TINT2 50 +#define DAVINCI_DMA_TIMER3_TINT3 51 +#define DAVINCI_DMA_PWM0 52 +#define DAVINCI_DMA_PWM1 53 +#define DAVINCI_DMA_PWM2 54 + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(int slot); +void edma_free_slot(unsigned slot); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +/* UNRELATED TO DMA */ +int davinci_alloc_iram(unsigned size); +void davinci_free_iram(unsigned addr, unsigned size); + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + + /* list of channels with no even trigger; terminated by "-1" */ + const s8 *noevent; +}; + +#endif -- cgit v1.2.3 From 474dad54baee8f8abe63ac334357a37021147701 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 7 Dec 2008 11:46:23 -0800 Subject: davinci: gpio bugfixes Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/gpio.c | 82 ++++++++++++++++++++++--------- arch/arm/mach-davinci/include/mach/gpio.h | 23 ++++----- 2 files changed, 69 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index b49e9d092aab..1aba41c6351e 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -36,9 +37,10 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; +static unsigned __initdata ngpio; /* create a non-inlined version */ -static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio) +static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { return __gpio_to_controller(gpio); } @@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void) { int i, base; - for (i = 0, base = 0; - i < ARRAY_SIZE(chips); - i++, base += 32) { + /* The gpio banks conceptually expose a segmented bitmap, + * and "ngpio" is one more than the largest zero-based + * bit index that's valid. + */ + if (cpu_is_davinci_dm355()) { /* or dm335() */ + ngpio = 104; + } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ + ngpio = 71; + } else if (cpu_is_davinci_dm646x()) { + /* NOTE: each bank has several "reserved" bits, + * unusable as GPIOs. Only 33 of the GPIO numbers + * are usable, and we're not rejecting the others. + */ + ngpio = 43; + } else { + /* if cpu_is_davinci_dm643x() ngpio = 111 */ + pr_err("GPIO setup: how many GPIOs?\n"); + return -EINVAL; + } + + if (WARN_ON(DAVINCI_N_GPIO < ngpio)) + ngpio = DAVINCI_N_GPIO; + + for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; chips[i].chip.direction_input = davinci_direction_in; @@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void) chips[i].chip.set = davinci_gpio_set; chips[i].chip.base = base; - chips[i].chip.ngpio = DAVINCI_N_GPIO - base; + chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; @@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup); * We expect irqs will normally be set up as input pins, but they can also be * used as output pins ... which is convenient for testing. * - * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition - * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have - * a good way to hook those up ... + * NOTE: The first few GPIOs also have direct INTC hookups in addition + * to their GPIOBNK0 irq, with a bit less overhead but less flexibility + * on triggering (e.g. no edge options). We don't try to use those. * - * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also + * All those INTC hookups (direct, plus several IRQ banks) can also * serve as EDMA event triggers. */ @@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) } /* - * NOTE: for suspend/resume, probably best to make a sysdev (and class) - * with its suspend/resume calls hooking into the results of the set_wake() + * NOTE: for suspend/resume, probably best to make a platform_device with + * suspend_late/resume_resume calls hooking into results of the set_wake() * calls ... so if no gpios are wakeup events the clock can be disabled, * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 - * can be set appropriately for GPIOV33 pins. + * (dm6446) can be set appropriately for GPIOV33 pins. */ static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; + unsigned bank_irq; struct clk *clk; + u32 binten = 0; + + if (cpu_is_davinci_dm355()) { /* or dm335() */ + bank_irq = IRQ_DM355_GPIOBNK0; + } else if (cpu_is_davinci_dm644x()) { + bank_irq = IRQ_GPIOBNK0; + } else if (cpu_is_davinci_dm646x()) { + bank_irq = IRQ_DM646X_GPIOBNK0; + } else { + printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); + return -EINVAL; + } clk = clk_get(NULL, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); - return 0; + return PTR_ERR(clk); } - clk_enable(clk); - for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0; - gpio < DAVINCI_N_GPIO; bank++) { + for (gpio = 0, irq = gpio_to_irq(0), bank = 0; + gpio < ngpio; + bank++, bank_irq++) { struct gpio_controller *__iomem g = gpio2controller(gpio); unsigned i; @@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->clr_rising); /* set up all irqs in this bank */ - set_irq_chained_handler(bank, gpio_irq_handler); - set_irq_chip_data(bank, g); - set_irq_data(bank, (void *)irq); + set_irq_chained_handler(bank_irq, gpio_irq_handler); + set_irq_chip_data(bank_irq, g); + set_irq_data(bank_irq, (void *)irq); - for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO; - i++, irq++, gpio++) { + for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { set_irq_chip(irq, &gpio_irqchip); set_irq_chip_data(irq, g); set_irq_handler(irq, handle_simple_irq); set_irq_flags(irq, IRQF_VALID); } + + binten |= BIT(bank); } /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(0x1f, (void *__iomem) + __raw_writel(binten, (void *__iomem) IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } - arch_initcall(davinci_gpio_irq_setup); diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index 5e7c36b202f1..efe3281364e6 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -28,23 +28,18 @@ * go through boot loaders. * * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are + * need to pay attention to PINMUX registers to be sure those pins are * used as gpios, not with other peripherals. * * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) + * and maybe for later updates, code may write GPIO(N). These may be + * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip + * may not support all the GPIOs in that range. * * GPIOs can also be on external chips, numbered after the ones built-in * to the DaVinci chip. For now, they won't be usable as IRQ sources. */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ struct gpio_controller { u32 dir; @@ -73,12 +68,14 @@ __gpio_to_controller(unsigned gpio) { void *__iomem ptr; - if (gpio < 32) + if (gpio < 32 * 1) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) + else if (gpio < 32 * 2) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) + else if (gpio < 32 * 3) ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + else if (gpio < 32 * 4) + ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); else ptr = NULL; return ptr; -- cgit v1.2.3 From fe277d9bbba9c2851ec11edcd5701f82e034ddd4 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Thu, 26 Mar 2009 19:33:21 -0700 Subject: davinci: PSC: Clear bits in MDCTL reg before setting new bits Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/psc.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index e44544ac2b16..84171abf5f7b 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -39,6 +39,7 @@ #define MDSTAT 0x800 #define MDCTL 0xA00 +#define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int id) @@ -53,14 +54,13 @@ int __init davinci_psc_is_clk_active(unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ mdctl = __raw_readl(psc_base + MDCTL + 4 * id); - if (enable) - mdctl |= 0x00000003; /* Enable Module */ - else - mdctl &= 0xFFFFFFE2; /* Disable Module */ + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); @@ -93,12 +93,7 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable) } while (!(((ptstat >> domain) & 1) == 0)); } - if (enable) - mdstat_mask = 0x3; - else - mdstat_mask = 0x2; - do { mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); - } while (!((mdstat & 0x0000001F) == mdstat_mask)); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state)); } -- cgit v1.2.3 From 9e16469c83167d6869ad6cbe83312027ec529c64 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 14 Apr 2009 07:53:02 -0500 Subject: davinci: DM646x: add interrupt number and priorities Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/irqs.h | 52 ++++++++++++++++++- arch/arm/mach-davinci/irq.c | 83 +++++++++++++++++++++++++++++-- 2 files changed, 129 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index f4c5ca6da9f4..9b0e412ebc28 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -96,10 +96,60 @@ #define IRQ_EMUINT 63 #define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 +#define DAVINCI_N_GPIO 104 #define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 +/* DaVinci DM6467-specific Interrupts */ +#define IRQ_DM646X_VP_VERTINT0 0 +#define IRQ_DM646X_VP_VERTINT1 1 +#define IRQ_DM646X_VP_VERTINT2 2 +#define IRQ_DM646X_VP_VERTINT3 3 +#define IRQ_DM646X_VP_ERRINT 4 +#define IRQ_DM646X_RESERVED_1 5 +#define IRQ_DM646X_RESERVED_2 6 +#define IRQ_DM646X_WDINT 7 +#define IRQ_DM646X_CRGENINT0 8 +#define IRQ_DM646X_CRGENINT1 9 +#define IRQ_DM646X_TSIFINT0 10 +#define IRQ_DM646X_TSIFINT1 11 +#define IRQ_DM646X_VDCEINT 12 +#define IRQ_DM646X_USBINT 13 +#define IRQ_DM646X_USBDMAINT 14 +#define IRQ_DM646X_PCIINT 15 +#define IRQ_DM646X_TCERRINT2 20 +#define IRQ_DM646X_TCERRINT3 21 +#define IRQ_DM646X_IDE 22 +#define IRQ_DM646X_HPIINT 23 +#define IRQ_DM646X_EMACRXTHINT 24 +#define IRQ_DM646X_EMACRXINT 25 +#define IRQ_DM646X_EMACTXINT 26 +#define IRQ_DM646X_EMACMISCINT 27 +#define IRQ_DM646X_MCASP0TXINT 28 +#define IRQ_DM646X_MCASP0RXINT 29 +#define IRQ_DM646X_RESERVED_3 31 +#define IRQ_DM646X_MCASP1TXINT 32 +#define IRQ_DM646X_VLQINT 38 +#define IRQ_DM646X_UARTINT2 42 +#define IRQ_DM646X_SPINT0 43 +#define IRQ_DM646X_SPINT1 44 +#define IRQ_DM646X_DSP2ARMINT 45 +#define IRQ_DM646X_RESERVED_4 46 +#define IRQ_DM646X_PSCINT 47 +#define IRQ_DM646X_GPIO0 48 +#define IRQ_DM646X_GPIO1 49 +#define IRQ_DM646X_GPIO2 50 +#define IRQ_DM646X_GPIO3 51 +#define IRQ_DM646X_GPIO4 52 +#define IRQ_DM646X_GPIO5 53 +#define IRQ_DM646X_GPIO6 54 +#define IRQ_DM646X_GPIO7 55 +#define IRQ_DM646X_GPIOBNK0 56 +#define IRQ_DM646X_GPIOBNK1 57 +#define IRQ_DM646X_GPIOBNK2 58 +#define IRQ_DM646X_DDRINT 59 +#define IRQ_DM646X_AEMIFINT 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index e76835cf1018..cf08ef2945eb 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -25,6 +25,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -40,6 +41,8 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C +const u8 *davinci_def_priorities; + #define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) static inline unsigned int davinci_irq_readl(int offset) @@ -110,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; - /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { +static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_VDINT0] = 2, [IRQ_VDINT1] = 6, [IRQ_VDINT2] = 6, @@ -179,11 +181,82 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { [IRQ_EMUINT] = 7, }; +static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - const u8 *priority = default_priorities; + + if (cpu_is_davinci_dm644x()) + davinci_def_priorities = dm644x_default_priorities; + else if (cpu_is_davinci_dm646x()) + davinci_def_priorities = dm646x_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); @@ -211,8 +284,8 @@ void __init davinci_irq_init(void) unsigned j; u32 pri; - for (j = 0, pri = 0; j < 32; j += 4, priority++) - pri |= (*priority & 0x07) << j; + for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++) + pri |= (*davinci_def_priorities & 0x07) << j; davinci_irq_writel(pri, i); } -- cgit v1.2.3 From f9337405b21bafb1c1a24316b3e43b3d3d697925 Mon Sep 17 00:00:00 2001 From: "s-paulraj@ti.com" Date: Thu, 18 Sep 2008 15:35:00 -0400 Subject: davinci: DM355 IRQ Definitions Adding IRQ defintions for DaVinci DM355 and default interrupt priorities for DM355 Signed-off-by: Sandeep Paulraj Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/irqs.h | 51 +++++++++++++++++++++++ arch/arm/mach-davinci/irq.c | 67 +++++++++++++++++++++++++++++++ 2 files changed, 118 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 9b0e412ebc28..18066074c995 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -152,4 +152,55 @@ #define IRQ_DM646X_DDRINT 59 #define IRQ_DM646X_AEMIFINT 60 +/* DaVinci DM355-specific Interrupts */ +#define IRQ_DM355_CCDC_VDINT0 0 +#define IRQ_DM355_CCDC_VDINT1 1 +#define IRQ_DM355_CCDC_VDINT2 2 +#define IRQ_DM355_IPIPE_HST 3 +#define IRQ_DM355_H3AINT 4 +#define IRQ_DM355_IPIPE_SDR 5 +#define IRQ_DM355_IPIPEIFINT 6 +#define IRQ_DM355_OSDINT 7 +#define IRQ_DM355_VENCINT 8 +#define IRQ_DM355_IMCOPINT 11 +#define IRQ_DM355_RTOINT 13 +#define IRQ_DM355_TINT4 13 +#define IRQ_DM355_TINT2_TINT12 13 +#define IRQ_DM355_UARTINT2 14 +#define IRQ_DM355_TINT5 14 +#define IRQ_DM355_TINT2_TINT34 14 +#define IRQ_DM355_TINT6 15 +#define IRQ_DM355_TINT3_TINT12 15 +#define IRQ_DM355_SPINT1_0 17 +#define IRQ_DM355_SPINT1_1 18 +#define IRQ_DM355_SPINT2_0 19 +#define IRQ_DM355_SPINT2_1 21 +#define IRQ_DM355_TINT7 22 +#define IRQ_DM355_TINT3_TINT34 22 +#define IRQ_DM355_SDIOINT0 23 +#define IRQ_DM355_MMCINT0 26 +#define IRQ_DM355_MSINT 26 +#define IRQ_DM355_MMCINT1 27 +#define IRQ_DM355_PWMINT3 28 +#define IRQ_DM355_SDIOINT1 31 +#define IRQ_DM355_SPINT0_0 42 +#define IRQ_DM355_SPINT0_1 43 +#define IRQ_DM355_GPIO0 44 +#define IRQ_DM355_GPIO1 45 +#define IRQ_DM355_GPIO2 46 +#define IRQ_DM355_GPIO3 47 +#define IRQ_DM355_GPIO4 48 +#define IRQ_DM355_GPIO5 49 +#define IRQ_DM355_GPIO6 50 +#define IRQ_DM355_GPIO7 51 +#define IRQ_DM355_GPIO8 52 +#define IRQ_DM355_GPIO9 53 +#define IRQ_DM355_GPIOBNK0 54 +#define IRQ_DM355_GPIOBNK1 55 +#define IRQ_DM355_GPIOBNK2 56 +#define IRQ_DM355_GPIOBNK3 57 +#define IRQ_DM355_GPIOBNK4 58 +#define IRQ_DM355_GPIOBNK5 59 +#define IRQ_DM355_GPIOBNK6 60 + #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index cf08ef2945eb..5a324c90e291 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -248,6 +248,71 @@ static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_EMUINT] = 7, }; +static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { @@ -257,6 +322,8 @@ void __init davinci_irq_init(void) davinci_def_priorities = dm644x_default_priorities; else if (cpu_is_davinci_dm646x()) davinci_def_priorities = dm646x_default_priorities; + else if (cpu_is_davinci_dm355()) + davinci_def_priorities = dm355_default_priorities; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); -- cgit v1.2.3 From 617b925f94e0126841164ffd40dd3a8879502b57 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 08:04:26 -0500 Subject: davinci: serial: generalize for more SoCs Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/serial.h | 21 ++++++- arch/arm/mach-davinci/serial.c | 95 +++++++++++++++++++++++------ 2 files changed, 96 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index fb8cb229bfd2..632847d74a1c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -13,8 +13,23 @@ #include -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) +#define DAVINCI_MAX_NR_UARTS 3 +#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) +#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) +#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) + +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + +/* DaVinci UART register offsets */ +#define UART_DAVINCI_PWREMU 0x0c +#define UART_DM646X_SCR 0x10 +#define UART_DM646X_SCR_TX_WATERMARK 0x08 + +struct davinci_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +extern void davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 3010f9971255..695075796522 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -32,32 +32,47 @@ #include #include #include +#include +#include "clock.h" -#define UART_DAVINCI_PWREMU 0x0c - -static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up, - int offset) +static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, + int offset) { offset <<= up->regshift; - return (unsigned int)__raw_readb(up->membase + offset); + return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset); } -static inline void davinci_serial_outp(struct plat_serial8250_port *p, - int offset, int value) +static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, + int value) { offset <<= p->regshift; - __raw_writeb(value, p->membase + offset); + __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } static struct plat_serial8250_port serial_platform_data[] = { { - .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE), - .mapbase = (unsigned long)DAVINCI_UART0_BASE, + .mapbase = DAVINCI_UART0_BASE, .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 2, - .uartclk = 27000000, }, { .flags = 0 @@ -74,22 +89,68 @@ static struct platform_device serial_device = { static void __init davinci_serial_reset(struct plat_serial8250_port *p) { - /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ unsigned int pwremu = 0; - davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */ + serial_write_reg(p, UART_IER, 0); /* disable all interrupts */ - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */ + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); mdelay(10); pwremu |= (0x3 << 13); pwremu |= 0x1; - davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu); + serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu); + + if (cpu_is_davinci_dm646x()) + serial_write_reg(p, UART_DM646X_SCR, + UART_DM646X_SCR_TX_WATERMARK); +} + +void __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i; + char name[16]; + struct clk *uart_clk; + struct device *dev = &serial_device.dev; + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { + struct plat_serial8250_port *p = serial_platform_data + i; + + if (!(info->enabled_uarts & (1 << i))) { + p->flags = 0; + continue; + } + + if (cpu_is_davinci_dm646x()) + p->iotype = UPIO_MEM32; + + if (cpu_is_davinci_dm355()) { + if (i == 2) { + p->mapbase = (unsigned long)DM355_UART2_BASE; + p->irq = IRQ_DM355_UARTINT2; + } + } + + sprintf(name, "uart%d", i); + uart_clk = clk_get(dev, name); + if (IS_ERR(uart_clk)) + printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, i); + else { + clk_enable(uart_clk); + p->uartclk = clk_get_rate(uart_clk); + davinci_serial_reset(p); + } + } } static int __init davinci_init(void) { - davinci_serial_reset(&serial_platform_data[0]); return platform_device_register(&serial_device); } -- cgit v1.2.3 From 5526b3f7e3317bdd0dcc0483214935ae64236efb Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 09:50:37 -0500 Subject: davinci: update pin-multiplexing support Update MUX support to be more general and useful across multiple SoCs in the DaVinci family. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 26 ++++ arch/arm/mach-davinci/Makefile | 4 +- arch/arm/mach-davinci/devices.c | 5 + arch/arm/mach-davinci/include/mach/mux.h | 220 ++++++++++++++++++++++++------- arch/arm/mach-davinci/mux.c | 99 +++++++++++--- arch/arm/mach-davinci/mux.h | 51 +++++++ 6 files changed, 339 insertions(+), 66 deletions(-) create mode 100644 arch/arm/mach-davinci/mux.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index af886734c73b..f18090e78e30 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -18,6 +18,32 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DaVinci EVM + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + config DAVINCI_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 3ee3d73d9566..b27871af4fcf 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,9 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o mux.o devices.o dma.o usb.o + gpio.o devices.o dma.o usb.o + +obj-$(CONFIG_DAVINCI_MUX) += mux.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 3ea6d477f06b..a31370b93dd2 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #define DAVINCI_I2C_BASE 0x01C21000 @@ -45,6 +47,9 @@ static struct platform_device davinci_i2c_device = { void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) { + if (cpu_is_davinci_dm644x()) + davinci_cfg_reg(DM644X_I2C); + davinci_i2c_device.dev.platform_data = pdata; (void) platform_device_register(&davinci_i2c_device); } diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index c24b6782804d..bae22cb3e27b 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -1,55 +1,183 @@ /* - * DaVinci pin multiplexing defines + * Table of the DAVINCI register configurations for the PINMUX combinations * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/include/asm-arm/arch-omap/mux.h: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ + +#ifndef __INC_MACH_MUX_H +#define __INC_MACH_MUX_H + +/* System module registers */ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +/* dm355 only */ +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + +struct mux_config { + const char *name; + const char *mux_reg_name; + const unsigned char mux_reg; + const unsigned char mask_offset; + const unsigned char mask; + const unsigned char mode; + bool debug; +}; + +enum davinci_dm644x_index { + /* ATA and HDDIR functions */ + DM644X_HDIREN, + DM644X_ATAEN, + DM644X_ATAEN_DISABLE, + + /* HPI functions */ + DM644X_HPIEN_DISABLE, + + /* AEAW functions */ + DM644X_AEAW, + + /* Memory Stick */ + DM644X_MSTK, + + /* I2C */ + DM644X_I2C, + + /* ASP function */ + DM644X_MCBSP, + + /* UART1 */ + DM644X_UART1, + + /* UART2 */ + DM644X_UART2, + + /* PWM0 */ + DM644X_PWM0, + + /* PWM1 */ + DM644X_PWM1, + + /* PWM2 */ + DM644X_PWM2, + + /* VLYNQ function */ + DM644X_VLYNQEN, + DM644X_VLSCREN, + DM644X_VLYNQWD, + + /* EMAC and MDIO function */ + DM644X_EMACEN, + + /* GPIO3V[0:16] pins */ + DM644X_GPIO3V, + + /* GPIO pins */ + DM644X_GPIO0, + DM644X_GPIO3, + DM644X_GPIO43_44, + DM644X_GPIO46_47, + + /* VPBE */ + DM644X_RGB666, + + /* LCD */ + DM644X_LOEEN, + DM644X_LFLDEN, +}; + +enum davinci_dm646x_index { + /* ATA function */ + DM646X_ATAEN, + + /* AUDIO Clock */ + DM646X_AUDCK1, + DM646X_AUDCK0, + + /* CRGEN Control */ + DM646X_CRGMUX, + + /* VPIF Control */ + DM646X_STSOMUX_DISABLE, + DM646X_STSIMUX_DISABLE, + DM646X_PTSOMUX_DISABLE, + DM646X_PTSIMUX_DISABLE, + + /* TSIF Control */ + DM646X_STSOMUX, + DM646X_STSIMUX, + DM646X_PTSOMUX_PARALLEL, + DM646X_PTSIMUX_PARALLEL, + DM646X_PTSOMUX_SERIAL, + DM646X_PTSIMUX_SERIAL, +}; + +enum davinci_dm355_index { + /* MMC/SD 0 */ + DM355_MMCSD0, + + /* MMC/SD 1 */ + DM355_SD1_CLK, + DM355_SD1_CMD, + DM355_SD1_DATA3, + DM355_SD1_DATA2, + DM355_SD1_DATA1, + DM355_SD1_DATA0, + + /* I2C */ + DM355_I2C_SDA, + DM355_I2C_SCL, + + /* ASP0 function */ + DM355_MCBSP0_BDX, + DM355_MCBSP0_X, + DM355_MCBSP0_BFSX, + DM355_MCBSP0_BDR, + DM355_MCBSP0_R, + DM355_MCBSP0_BFSR, + + /* SPI0 */ + DM355_SPI0_SDI, + DM355_SPI0_SDENA0, + DM355_SPI0_SDENA1, + + /* IRQ muxing */ + DM355_INT_EDMA_CC, + DM355_INT_EDMA_TC0_ERR, + DM355_INT_EDMA_TC1_ERR, + + /* EDMA event muxing */ + DM355_EVT8_ASP1_TX, + DM355_EVT9_ASP1_RX, + DM355_EVT26_MMC0_RX, +}; + +#ifdef CONFIG_DAVINCI_MUX +/* setup pin muxing */ +extern void davinci_mux_init(void); +extern int davinci_mux_register(const struct mux_config *pins, + unsigned long size); +extern int davinci_cfg_reg(unsigned long reg_cfg); +#else +/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ +static inline void davinci_mux_init(void) {} +static inline int davinci_mux_register(const struct mux_config *pins, + unsigned long size) { return 0; } +static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif /* __INC_MACH_MUX_H */ diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index 53734dee1f93..bbba0b247a44 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -1,42 +1,103 @@ /* - * DaVinci pin multiplexing configurations + * Utility to set the DAVINCI MUX register from a table in mux.h * * Author: Vladimir Barinov, MontaVista Software, Inc. * + * Based on linux/arch/arm/plat-omap/mux.c: + * Copyright (C) 2003 - 2005 Nokia Corporation + * + * Written by Tony Lindgren + * * 2007 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. + * + * Copyright (C) 2008 Texas Instruments. */ #include +#include #include #include - #include -/* System control register offsets */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 +static const struct mux_config *mux_table; +static unsigned long pin_table_sz; + +int __init davinci_mux_register(const struct mux_config *pins, + unsigned long size) +{ + mux_table = pins; + pin_table_sz = size; -static DEFINE_SPINLOCK(mux_lock); + return 0; +} -void davinci_mux_peripheral(unsigned int mux, unsigned int enable) +/* + * Sets the DAVINCI MUX register based on the table + */ +int __init_or_module davinci_cfg_reg(const unsigned long index) { + static DEFINE_SPINLOCK(mux_spin_lock); void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); - u32 pinmux, muxreg = PINMUX0; + unsigned long flags; + const struct mux_config *cfg; + unsigned int reg_orig = 0, reg = 0; + unsigned int mask, warn = 0; + + if (!mux_table) + BUG(); + + if (index >= pin_table_sz) { + printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", + index, pin_table_sz); + dump_stack(); + return -ENODEV; + } + + cfg = &mux_table[index]; + + if (cfg->name == NULL) { + printk(KERN_ERR "No entry for the specified index\n"); + return -ENODEV; + } + + /* Update the mux register in question */ + if (cfg->mask) { + unsigned tmp1, tmp2; + + spin_lock_irqsave(&mux_spin_lock, flags); + reg_orig = __raw_readl(base + cfg->mux_reg); + + mask = (cfg->mask << cfg->mask_offset); + tmp1 = reg_orig & mask; + reg = reg_orig & ~mask; + + tmp2 = (cfg->mode << cfg->mask_offset); + reg |= tmp2; + + if (tmp1 != tmp2) + warn = 1; + + __raw_writel(reg, base + cfg->mux_reg); + spin_unlock_irqrestore(&mux_spin_lock, flags); + } + + if (warn) { +#ifdef CONFIG_DAVINCI_MUX_WARNINGS + printk(KERN_WARNING "MUX: initialized %s\n", cfg->name); +#endif + } - if (mux >= DAVINCI_MUX_LEVEL2) { - muxreg = PINMUX1; - mux -= DAVINCI_MUX_LEVEL2; +#ifdef CONFIG_DAVINCI_MUX_DEBUG + if (cfg->debug || warn) { + printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name); + printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n", + cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg); } +#endif - spin_lock(&mux_lock); - pinmux = __raw_readl(base + muxreg); - if (enable) - pinmux |= (1 << mux); - else - pinmux &= ~(1 << mux); - __raw_writel(pinmux, base + muxreg); - spin_unlock(&mux_lock); + return 0; } +EXPORT_SYMBOL(davinci_cfg_reg); diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h new file mode 100644 index 000000000000..adc869413371 --- /dev/null +++ b/arch/arm/mach-davinci/mux.h @@ -0,0 +1,51 @@ +/* + * Pin-multiplex helper macros for TI DaVinci family devices + * + * Author: Vladimir Barinov, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2008 Texas Instruments. + */ +#ifndef _MACH_DAVINCI_MUX_H_ +#define _MACH_DAVINCI_MUX_H_ + +#include + +#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "PINMUX"#muxreg, \ + .mux_reg = PINMUX##muxreg, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "INTMUX", \ + .mux_reg = INTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \ +[soc##_##desc] = { \ + .name = #desc, \ + .debug = dbg, \ + .mux_reg_name = "EVTMUX", \ + .mux_reg = EVTMUX, \ + .mask_offset = mode_offset, \ + .mask = mode_mask, \ + .mode = mux_mode, \ + }, + +#endif /* _MACH_DAVINCI_MUX_H */ -- cgit v1.2.3 From 73d3c68f09e608be983013dc8b3e49aebe89298c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 10:57:40 -0500 Subject: davinci: DM644x: rename board file Rename DM6446 EVM board file, no functional changes. Code is updated and reworked in following patch. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 440 +++++++++++++++++++++++++++++++ arch/arm/mach-davinci/board-evm.c | 440 ------------------------------- 2 files changed, 440 insertions(+), 440 deletions(-) create mode 100644 arch/arm/mach-davinci/board-dm644x-evm.c delete mode 100644 arch/arm/mach-davinci/board-evm.c (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c new file mode 100644 index 000000000000..c2701d740a1d --- /dev/null +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -0,0 +1,440 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include + +#define DAVINCI_CFC_ATA_BASE 0x01C66000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* other misc. init functions */ +void __init davinci_psc_init(void); +void __init davinci_irq_init(void); +void __init davinci_map_common_io(void); +void __init davinci_init_common_hw(void); + +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + +static struct mtd_partition davinci_evm_norflash_partitions[] = { + /* bootloader (U-Boot, etc) in first 4 sectors */ + { + .name = "bootloader", + .offset = 0, + .size = 4 * SZ_64K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next 1 sectors */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_64K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct physmap_flash_data davinci_evm_norflash_data = { + .width = 2, + .parts = davinci_evm_norflash_partitions, + .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), +}; + +/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF + * limits addresses to 16M, so using addresses past 16M will wrap */ +static struct resource davinci_evm_norflash_resource = { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device davinci_evm_norflash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &davinci_evm_norflash_data, + }, + .num_resources = 1, + .resource = &davinci_evm_norflash_resource, +}; + +#endif + +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + +static struct resource ide_resources[] = { + { + .start = DAVINCI_CFC_ATA_BASE, + .end = DAVINCI_CFC_ATA_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_IDE, + .end = IRQ_IDE, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ide_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ide_dev = { + .name = "palm_bk3710", + .id = -1, + .resource = ide_resources, + .num_resources = ARRAY_SIZE(ide_resources), + .dev = { + .dma_mask = &ide_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#endif + +/*----------------------------------------------------------------------*/ + +/* + * I2C GPIO expanders + */ + +#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) + + +/* U2 -- LEDs */ + +static struct gpio_led evm_leds[] = { + { .name = "DS8", .active_low = 1, + .default_trigger = "heartbeat", }, + { .name = "DS7", .active_low = 1, }, + { .name = "DS6", .active_low = 1, }, + { .name = "DS5", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS2", .active_low = 1, + .default_trigger = "mmc0", }, + { .name = "DS1", .active_low = 1, + .default_trigger = "ide-disk", }, +}; + +static const struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int +evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + } + + /* what an extremely annoying way to be forced to handle + * device unregistration ... + */ + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, + &evm_led_data, sizeof evm_led_data); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int +evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u2 = { + .gpio_base = PCF_Uxx_BASE(0), + .setup = evm_led_setup, + .teardown = evm_led_teardown, +}; + + +/* U18 - A/V clock generator and user switch */ + +static int sw_gpio; + +static ssize_t +sw_show(struct device *d, struct device_attribute *a, char *buf) +{ + char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; + + strcpy(buf, s); + return strlen(s); +} + +static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); + +static int +evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + int status; + + /* export dip switch option */ + sw_gpio = gpio + 7; + status = gpio_request(sw_gpio, "user_sw"); + if (status == 0) + status = gpio_direction_input(sw_gpio); + if (status == 0) + status = device_create_file(&client->dev, &dev_attr_user_sw); + else + gpio_free(sw_gpio); + if (status != 0) + sw_gpio = -EINVAL; + + /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ + gpio_request(gpio + 3, "pll_fs2"); + gpio_direction_output(gpio + 3, 0); + + gpio_request(gpio + 2, "pll_fs1"); + gpio_direction_output(gpio + 2, 0); + + gpio_request(gpio + 1, "pll_sr"); + gpio_direction_output(gpio + 1, 0); + + return 0; +} + +static int +evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 1); + gpio_free(gpio + 2); + gpio_free(gpio + 3); + + if (sw_gpio > 0) { + device_remove_file(&client->dev, &dev_attr_user_sw); + gpio_free(sw_gpio); + } + return 0; +} + +static struct pcf857x_platform_data pcf_data_u18 = { + .gpio_base = PCF_Uxx_BASE(1), + .n_latch = (1 << 3) | (1 << 2) | (1 << 1), + .setup = evm_u18_setup, + .teardown = evm_u18_teardown, +}; + + +/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ + +static int +evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + /* p0 = nDRV_VBUS (initial: don't supply it) */ + gpio_request(gpio + 0, "nDRV_VBUS"); + gpio_direction_output(gpio + 0, 1); + + /* p1 = VDDIMX_EN */ + gpio_request(gpio + 1, "VDDIMX_EN"); + gpio_direction_output(gpio + 1, 1); + + /* p2 = VLYNQ_EN */ + gpio_request(gpio + 2, "VLYNQ_EN"); + gpio_direction_output(gpio + 2, 1); + + /* p3 = n3V3_CF_RESET (initial: stay in reset) */ + gpio_request(gpio + 3, "nCF_RESET"); + gpio_direction_output(gpio + 3, 0); + + /* (p4 unused) */ + + /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ + gpio_request(gpio + 5, "WLAN_RESET"); + gpio_direction_output(gpio + 5, 1); + + /* p6 = nATA_SEL (initial: select) */ + gpio_request(gpio + 6, "nATA_SEL"); + gpio_direction_output(gpio + 6, 0); + + /* p7 = nCF_SEL (initial: deselect) */ + gpio_request(gpio + 7, "nCF_SEL"); + gpio_direction_output(gpio + 7, 1); + + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + + return 0; +} + +static int +evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) +{ + gpio_free(gpio + 7); + gpio_free(gpio + 6); + gpio_free(gpio + 5); + gpio_free(gpio + 3); + gpio_free(gpio + 2); + gpio_free(gpio + 1); + gpio_free(gpio + 0); + return 0; +} + +static struct pcf857x_platform_data pcf_data_u35 = { + .gpio_base = PCF_Uxx_BASE(2), + .setup = evm_u35_setup, + .teardown = evm_u35_teardown, +}; + +/*----------------------------------------------------------------------*/ + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) + * - ... newer boards may have more + */ +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("pcf8574", 0x38), + .platform_data = &pcf_data_u2, + }, + { + I2C_BOARD_INFO("pcf8574", 0x39), + .platform_data = &pcf_data_u18, + }, + { + I2C_BOARD_INFO("pcf8574", 0x3a), + .platform_data = &pcf_data_u35, + }, + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + /* ALSO: + * - tvl320aic33 audio codec (0x1b) + * - msp430 microcontroller (0x23) + * - tvp5146 video decoder (0x5d) + */ +}; + +/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), + * which requires 100 usec of idle bus after i2c writes sent to it. + */ +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_evm_devices[] __initdata = { +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + &davinci_evm_norflash_device, +#endif +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) + &ide_dev, +#endif +}; + +static void __init +davinci_evm_map_io(void) +{ + davinci_map_common_io(); +} + +static __init void davinci_evm_init(void) +{ +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#if defined(CONFIG_MTD_PHYSMAP) || \ + defined(CONFIG_MTD_PHYSMAP_MODULE) + printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " + "but share pins.\n\t Disable IDE for NOR support.\n"); +#endif +#endif + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); +} + +static __init void davinci_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_EVM, "DaVinci EVM") + /* Maintainer: MontaVista Software */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_evm_map_io, + .init_irq = davinci_evm_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c deleted file mode 100644 index c2701d740a1d..000000000000 --- a/arch/arm/mach-davinci/board-evm.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * TI DaVinci EVM board support - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include - -#define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 - -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - -static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ - { - .name = "bootloader", - .offset = 0, - .size = 4 * SZ_64K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next 1 sectors */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data davinci_evm_norflash_data = { - .width = 2, - .parts = davinci_evm_norflash_partitions, - .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions), -}; - -/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF - * limits addresses to 16M, so using addresses past 16M will wrap */ -static struct resource davinci_evm_norflash_resource = { - .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, - .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device davinci_evm_norflash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &davinci_evm_norflash_data, - }, - .num_resources = 1, - .resource = &davinci_evm_norflash_resource, -}; - -#endif - -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - -static struct resource ide_resources[] = { - { - .start = DAVINCI_CFC_ATA_BASE, - .end = DAVINCI_CFC_ATA_BASE + 0x7ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IDE, - .end = IRQ_IDE, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ide_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ide_dev = { - .name = "palm_bk3710", - .id = -1, - .resource = ide_resources, - .num_resources = ARRAY_SIZE(ide_resources), - .dev = { - .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif - -/*----------------------------------------------------------------------*/ - -/* - * I2C GPIO expanders - */ - -#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8)) - - -/* U2 -- LEDs */ - -static struct gpio_led evm_leds[] = { - { .name = "DS8", .active_low = 1, - .default_trigger = "heartbeat", }, - { .name = "DS7", .active_low = 1, }, - { .name = "DS6", .active_low = 1, }, - { .name = "DS5", .active_low = 1, }, - { .name = "DS4", .active_low = 1, }, - { .name = "DS3", .active_low = 1, }, - { .name = "DS2", .active_low = 1, - .default_trigger = "mmc0", }, - { .name = "DS1", .active_low = 1, - .default_trigger = "ide-disk", }, -}; - -static const struct gpio_led_platform_data evm_led_data = { - .num_leds = ARRAY_SIZE(evm_leds), - .leds = evm_leds, -}; - -static struct platform_device *evm_led_dev; - -static int -evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - struct gpio_led *leds = evm_leds; - int status; - - while (ngpio--) { - leds->gpio = gpio++; - leds++; - } - - /* what an extremely annoying way to be forced to handle - * device unregistration ... - */ - evm_led_dev = platform_device_alloc("leds-gpio", 0); - platform_device_add_data(evm_led_dev, - &evm_led_data, sizeof evm_led_data); - - evm_led_dev->dev.parent = &client->dev; - status = platform_device_add(evm_led_dev); - if (status < 0) { - platform_device_put(evm_led_dev); - evm_led_dev = NULL; - } - return status; -} - -static int -evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - if (evm_led_dev) { - platform_device_unregister(evm_led_dev); - evm_led_dev = NULL; - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u2 = { - .gpio_base = PCF_Uxx_BASE(0), - .setup = evm_led_setup, - .teardown = evm_led_teardown, -}; - - -/* U18 - A/V clock generator and user switch */ - -static int sw_gpio; - -static ssize_t -sw_show(struct device *d, struct device_attribute *a, char *buf) -{ - char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n"; - - strcpy(buf, s); - return strlen(s); -} - -static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL); - -static int -evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - int status; - - /* export dip switch option */ - sw_gpio = gpio + 7; - status = gpio_request(sw_gpio, "user_sw"); - if (status == 0) - status = gpio_direction_input(sw_gpio); - if (status == 0) - status = device_create_file(&client->dev, &dev_attr_user_sw); - else - gpio_free(sw_gpio); - if (status != 0) - sw_gpio = -EINVAL; - - /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */ - gpio_request(gpio + 3, "pll_fs2"); - gpio_direction_output(gpio + 3, 0); - - gpio_request(gpio + 2, "pll_fs1"); - gpio_direction_output(gpio + 2, 0); - - gpio_request(gpio + 1, "pll_sr"); - gpio_direction_output(gpio + 1, 0); - - return 0; -} - -static int -evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 1); - gpio_free(gpio + 2); - gpio_free(gpio + 3); - - if (sw_gpio > 0) { - device_remove_file(&client->dev, &dev_attr_user_sw); - gpio_free(sw_gpio); - } - return 0; -} - -static struct pcf857x_platform_data pcf_data_u18 = { - .gpio_base = PCF_Uxx_BASE(1), - .n_latch = (1 << 3) | (1 << 2) | (1 << 1), - .setup = evm_u18_setup, - .teardown = evm_u18_teardown, -}; - - -/* U35 - various I/O signals used to manage USB, CF, ATA, etc */ - -static int -evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - /* p0 = nDRV_VBUS (initial: don't supply it) */ - gpio_request(gpio + 0, "nDRV_VBUS"); - gpio_direction_output(gpio + 0, 1); - - /* p1 = VDDIMX_EN */ - gpio_request(gpio + 1, "VDDIMX_EN"); - gpio_direction_output(gpio + 1, 1); - - /* p2 = VLYNQ_EN */ - gpio_request(gpio + 2, "VLYNQ_EN"); - gpio_direction_output(gpio + 2, 1); - - /* p3 = n3V3_CF_RESET (initial: stay in reset) */ - gpio_request(gpio + 3, "nCF_RESET"); - gpio_direction_output(gpio + 3, 0); - - /* (p4 unused) */ - - /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */ - gpio_request(gpio + 5, "WLAN_RESET"); - gpio_direction_output(gpio + 5, 1); - - /* p6 = nATA_SEL (initial: select) */ - gpio_request(gpio + 6, "nATA_SEL"); - gpio_direction_output(gpio + 6, 0); - - /* p7 = nCF_SEL (initial: deselect) */ - gpio_request(gpio + 7, "nCF_SEL"); - gpio_direction_output(gpio + 7, 1); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); - - return 0; -} - -static int -evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c) -{ - gpio_free(gpio + 7); - gpio_free(gpio + 6); - gpio_free(gpio + 5); - gpio_free(gpio + 3); - gpio_free(gpio + 2); - gpio_free(gpio + 1); - gpio_free(gpio + 0); - return 0; -} - -static struct pcf857x_platform_data pcf_data_u35 = { - .gpio_base = PCF_Uxx_BASE(2), - .setup = evm_u35_setup, - .teardown = evm_u35_teardown, -}; - -/*----------------------------------------------------------------------*/ - -/* Most of this EEPROM is unused, but U-Boot uses some data: - * - 0x7f00, 6 bytes Ethernet Address - * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) - * - ... newer boards may have more - */ -static struct at24_platform_data eeprom_info = { - .byte_len = (256*1024) / 8, - .page_size = 64, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info __initdata i2c_info[] = { - { - I2C_BOARD_INFO("pcf8574", 0x38), - .platform_data = &pcf_data_u2, - }, - { - I2C_BOARD_INFO("pcf8574", 0x39), - .platform_data = &pcf_data_u18, - }, - { - I2C_BOARD_INFO("pcf8574", 0x3a), - .platform_data = &pcf_data_u35, - }, - { - I2C_BOARD_INFO("24c256", 0x50), - .platform_data = &eeprom_info, - }, - /* ALSO: - * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) - * - tvp5146 video decoder (0x5d) - */ -}; - -/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz), - * which requires 100 usec of idle bus after i2c writes sent to it. - */ -static struct davinci_i2c_platform_data i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static void __init evm_init_i2c(void) -{ - davinci_init_i2c(&i2c_pdata); - i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); -} - -static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif -}; - -static void __init -davinci_evm_map_io(void) -{ - davinci_map_common_io(); -} - -static __init void davinci_evm_init(void) -{ -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); -#endif -#endif - - platform_add_devices(davinci_evm_devices, - ARRAY_SIZE(davinci_evm_devices)); - evm_init_i2c(); -} - -static __init void davinci_evm_irq_init(void) -{ - davinci_irq_init(); -} - -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") - /* Maintainer: MontaVista Software */ - .phys_io = IO_PHYS, - .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, - .boot_params = (DAVINCI_DDR_BASE + 0x100), - .map_io = davinci_evm_map_io, - .init_irq = davinci_evm_irq_init, - .timer = &davinci_timer, - .init_machine = davinci_evm_init, -MACHINE_END -- cgit v1.2.3 From d0e47fba054a55e0066c6ae2c807d98d086af5a9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 14 Apr 2009 11:30:11 -0500 Subject: davinci: update DM644x support in preparation for more SoCs Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 9 +- arch/arm/mach-davinci/Makefile | 5 +- arch/arm/mach-davinci/board-dm644x-evm.c | 292 +++++++++++-- arch/arm/mach-davinci/dm644x.c | 461 +++++++++++++++++++++ .../mach-davinci/include/mach/board-dm6446evm.h | 20 + arch/arm/mach-davinci/include/mach/common.h | 6 + arch/arm/mach-davinci/include/mach/dm644x.h | 37 ++ 7 files changed, 791 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-davinci/dm644x.c create mode 100644 arch/arm/mach-davinci/include/mach/board-dm6446evm.h create mode 100644 arch/arm/mach-davinci/include/mach/dm644x.h (limited to 'arch') diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f18090e78e30..a9c78bc72b84 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,19 +4,18 @@ menu "TI DaVinci Implementations" comment "DaVinci Core Type" -config ARCH_DAVINCI644x - default y +config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" comment "DaVinci Board Type" config MACH_DAVINCI_EVM - bool "TI DaVinci EVM" + bool "TI DM644x EVM" default y - depends on ARCH_DAVINCI644x + depends on ARCH_DAVINCI_DM644x help Configure this option to specify the whether the board used - for development is a DaVinci EVM + for development is a DM644x EVM config DAVINCI_MUX diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index b27871af4fcf..1674661942f3 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -9,5 +9,8 @@ obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ obj-$(CONFIG_DAVINCI_MUX) += mux.o +# Chip specific +obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o + # Board specific -obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o +obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c2701d740a1d..5387e6b20405 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -15,15 +15,19 @@ #include #include #include +#include #include #include #include - +#include #include +#include #include #include #include +#include +#include #include #include @@ -32,28 +36,34 @@ #include #include -#include +#include #include #include +#include +#include +#include +#include + +#define DM644X_EVM_PHY_MASK (0x2) +#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ #define DAVINCI_CFC_ATA_BASE 0x01C66000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 -/* other misc. init functions */ -void __init davinci_psc_init(void); -void __init davinci_irq_init(void); -void __init davinci_map_common_io(void); -void __init davinci_init_common_hw(void); +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000 -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) +#define LXT971_PHY_ID (0x001378e2) +#define LXT971_PHY_MASK (0xfffffff0) static struct mtd_partition davinci_evm_norflash_partitions[] = { - /* bootloader (U-Boot, etc) in first 4 sectors */ + /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { .name = "bootloader", .offset = 0, - .size = 4 * SZ_64K, + .size = 5 * SZ_64K, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* bootloader params in the next 1 sectors */ @@ -103,10 +113,60 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; -#endif +struct mtd_partition davinci_evm_nandflash_partition[] = { + /* 5 MB space at the beginning for bootloader and kernel */ + { + .name = "NAND filesystem", + .offset = 5 * SZ_1M, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } +}; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +static struct davinci_nand_pdata davinci_evm_nandflash_data = { + .parts = davinci_evm_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), + .ecc_mode = NAND_ECC_HW, +}; + +static struct resource davinci_evm_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_evm_nandflash_device = { + .name = "davinci_nand", + .id = 0, + .dev = { + .platform_data = &davinci_evm_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource), + .resource = davinci_evm_nandflash_resource, +}; + +static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; + +static struct platform_device davinci_fb_device = { + .name = "davincifb", + .id = -1, + .dev = { + .dma_mask = &davinci_fb_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = 0, +}; + +static struct platform_device rtc_dev = { + .name = "rtc_davinci_evm", + .id = -1, +}; static struct resource ide_resources[] = { { @@ -121,7 +181,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_BIT_MASK(32); +static u64 ide_dma_mask = DMA_32BIT_MASK; static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -130,12 +190,10 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = DMA_32BIT_MASK, }, }; -#endif - /*----------------------------------------------------------------------*/ /* @@ -314,7 +372,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + /* irlml6401 switches over 1A, in under 8 msec; + * now it can be managed by nDRV_VBUS ... + */ setup_usb(500, 8); return 0; @@ -346,13 +406,119 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + DECLARE_MAC_BUF(mac_str); + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { + printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", + print_mac(mac_str, mac_addr)); + } +} + static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, +}; + +int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_read); + +int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm6446evm_eeprom_write); + +/* + * MSP430 supports RTC, card detection, input from IR remote, and + * a bit more. It triggers interrupts on GPIO(7) from pressing + * buttons on the IR remote, and for card detect switches. + */ +static struct i2c_client *dm6446evm_msp; + +static int dm6446evm_msp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dm6446evm_msp = client; + return 0; +} + +static int dm6446evm_msp_remove(struct i2c_client *client) +{ + dm6446evm_msp = NULL; + return 0; +} + +static const struct i2c_device_id dm6446evm_msp_ids[] = { + { "dm6446evm_msp", 0, }, + { /* end of list */ }, +}; + +static struct i2c_driver dm6446evm_msp_driver = { + .driver.name = "dm6446evm_msp", + .id_table = dm6446evm_msp_ids, + .probe = dm6446evm_msp_probe, + .remove = dm6446evm_msp_remove, }; +static int dm6444evm_msp430_get_pins(void) +{ + static const char txbuf[2] = { 2, 4, }; + char buf[4]; + struct i2c_msg msg[2] = { + { + .addr = dm6446evm_msp->addr, + .flags = 0, + .len = 2, + .buf = (void __force *)txbuf, + }, + { + .addr = dm6446evm_msp->addr, + .flags = I2C_M_RD, + .len = 4, + .buf = buf, + }, + }; + int status; + + if (!dm6446evm_msp) + return -ENXIO; + + /* Command 4 == get input state, returns port 2 and port3 data + * S Addr W [A] len=2 [A] cmd=4 [A] + * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P + */ + status = i2c_transfer(dm6446evm_msp->adapter, msg, 2); + if (status < 0) + return status; + + dev_dbg(&dm6446evm_msp->dev, + "PINS: %02x %02x %02x %02x\n", + buf[0], buf[1], buf[2], buf[3]); + + return (buf[3] << 8) | buf[2]; +} + static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("dm6446evm_msp", 0x23), + }, { I2C_BOARD_INFO("pcf8574", 0x38), .platform_data = &pcf_data_u2, @@ -371,7 +537,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, /* ALSO: * - tvl320aic33 audio codec (0x1b) - * - msp430 microcontroller (0x23) * - tvp5146 video decoder (0x5d) */ }; @@ -387,40 +552,101 @@ static struct davinci_i2c_platform_data i2c_pdata = { static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); + i2c_add_driver(&dm6446evm_msp_driver); i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); } static struct platform_device *davinci_evm_devices[] __initdata = { -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) - &davinci_evm_norflash_device, -#endif -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) - &ide_dev, -#endif + &davinci_fb_device, + &rtc_dev, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), }; static void __init davinci_evm_map_io(void) { davinci_map_common_io(); + dm644x_init(); } -static __init void davinci_evm_init(void) +static int davinci_phy_fixup(struct phy_device *phydev) { + unsigned int control; + /* CRITICAL: Fix for increasing PHY signal drive strength for + * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY + * signal strength was low causing TX to fail randomly. The + * fix is to Set bit 11 (Increased MII drive strength) of PHY + * register 26 (Digital Config register) on this phy. */ + control = phy_read(phydev, 26); + phy_write(phydev, 26, (control | 0x800)); + return 0; +} + #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + #if defined(CONFIG_MTD_PHYSMAP) || \ defined(CONFIG_MTD_PHYSMAP_MODULE) - printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, " - "but share pins.\n\t Disable IDE for NOR support.\n"); +#define HAS_NOR 1 +#else +#define HAS_NOR 0 #endif + +#if defined(CONFIG_MTD_NAND_DAVINCI) || \ + defined(CONFIG_MTD_NAND_DAVINCI_MODULE) +#define HAS_NAND 1 +#else +#define HAS_NAND 0 #endif +static __init void davinci_evm_init(void) +{ + struct clk *aemif_clk; + + aemif_clk = clk_get(NULL, "aemif"); + clk_enable(aemif_clk); + + if (HAS_ATA) { + if (HAS_NAND || HAS_NOR) + pr_warning("WARNING: both IDE and Flash are " + "enabled, but they share AEMIF pins.\n" + "\tDisable IDE for NAND/NOR support.\n"); + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN); + davinci_cfg_reg(DM644X_HDIREN); + platform_device_register(&ide_dev); + } else if (HAS_NAND || HAS_NOR) { + davinci_cfg_reg(DM644X_HPIEN_DISABLE); + davinci_cfg_reg(DM644X_ATAEN_DISABLE); + + /* only one device will be jumpered and detected */ + if (HAS_NAND) { + platform_device_register(&davinci_evm_nandflash_device); + evm_leds[7].default_trigger = "nand-disk"; + if (HAS_NOR) + pr_warning("WARNING: both NAND and NOR flash " + "are enabled; disable one of them.\n"); + } else if (HAS_NOR) + platform_device_register(&davinci_evm_norflash_device); + } + platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + + davinci_serial_init(&uart_config); + + /* Register the fixup for PHY on DaVinci */ + phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, + davinci_phy_fixup); + } static __init void davinci_evm_irq_init(void) @@ -428,7 +654,7 @@ static __init void davinci_evm_irq_init(void) davinci_irq_init(); } -MACHINE_START(DAVINCI_EVM, "DaVinci EVM") +MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") /* Maintainer: MontaVista Software */ .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c new file mode 100644 index 000000000000..d428ef192eac --- /dev/null +++ b/arch/arm/mach-davinci/dm644x.c @@ -0,0 +1,461 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM644X_REF_FREQ 27000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM644X_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclk2 = { + .name = "pll2_sysclk2", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_GEM, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vicp_clk = { + .name = "vicp", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_IMCOP, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk3, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_EMAC_WRAPPER, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk ide_clk = { + .name = "ide", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_ATA, +}; + +static struct clk asp_clk = { + .name = "asp0", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk mmcsd_clk = { + .name = "mmcsd", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk spi_clk = { + .name = "spi", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct clk vlynq_clk = { + .name = "vlynq", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_VLYNQ, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk5, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +struct davinci_clk dm644x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclk2", &pll2_sysclk2), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "vicp", &vicp_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("palm_bk3710", NULL, &ide_clk), + CLK("soc-audio.0", NULL, &asp_clk), + CLK("davinci_mmc.0", NULL, &mmcsd_clk), + CLK(NULL, "spi", &spi_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, "vlynq", &vlynq_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, NULL, NULL), +}; + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +static struct resource dm644x_emac_resources[] = { + { + .start = DM644X_EMAC_BASE, + .end = DM644X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EMACINT, + .end = IRQ_EMACINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm644x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm644x_emac_resources), + .resource = dm644x_emac_resources, +}; + +#endif + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm644x_pins[] = { +MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) +MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) +MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) + +MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true) + +MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true) + +MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false) + +MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false) + +MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false) + +MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true) +MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true) + +MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false) + +MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false) + +MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false) + +MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false) +MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false) +MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false) + +MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true) + +MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true) + +MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true) +MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false) +MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false) +MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true) + +MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) + +MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) +MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +}; + + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm644x_no_event[] = { + 0, 1, 12, 13, 14, + 15, 25, 30, 31, 45, + 46, 47, 55, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm644x_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm644x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm644x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm644x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ +void __init dm644x_init(void) +{ + davinci_clk_init(dm644x_clks); + davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); +} + +static int __init dm644x_init_devices(void) +{ + if (!cpu_is_davinci_dm644x()) + return 0; + + platform_device_register(&dm644x_edma_device); + return 0; +} +postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h new file mode 100644 index 000000000000..3216f21c1238 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h @@ -0,0 +1,20 @@ +/* + * DaVinci DM6446 EVM board specific headers + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or ifndef. + */ + +#ifndef _MACH_DAVINCI_DM6446EVM_H +#define _MACH_DAVINCI_DM6446EVM_H + +#include + +int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); +int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 4b522e5c70ec..191770976250 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -16,6 +16,12 @@ struct sys_timer; extern struct sys_timer davinci_timer; +extern void davinci_irq_init(void); +extern void davinci_map_common_io(void); + +/* parameters describe VBUS sourcing for host mode */ +extern void setup_usb(unsigned mA, unsigned potpgt_msec); + /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h new file mode 100644 index 000000000000..3dcb9f4e58b4 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -0,0 +1,37 @@ +/* + * This file contains the processor specific definitions + * of the TI DM644x. + * + * Copyright (C) 2008 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_DM644X_H +#define __ASM_ARCH_DM644X_H + +#include +#include + +#define DM644X_EMAC_BASE (0x01C80000) +#define DM644X_EMAC_CNTRL_OFFSET (0x0000) +#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM644X_EMAC_MDIO_OFFSET (0x4000) +#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) + +void __init dm644x_init(void); + +#endif /* __ASM_ARCH_DM644X_H */ -- cgit v1.2.3 From 3e9c18e1dc71b9a0fac302e2defe99d850ad3d79 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Apr 2009 14:19:21 -0500 Subject: davinci: DM644x: NAND: update partitioning Update NAND partitioning for the dm6446 evm, unmasking the hidden data at the beginning and letting the kernel be updated from Linux. - This is boot-compatible with TI's software (U-Boot 1.20 and both the 2.6.10 and 2.6.18 kernels), in terms of startup and loading kernels from flash. - In the same way, it's also boot-compatible with mainline U-Boot, which stores U-Boot params in block 0 not block 16. - It's not quite compatible with systems that previously used NAND partitions to hold (filesystem) data. The compatibilities are a bit different based on which kernel was used previously + Users of TI/MV kernels no longer see mtd2 "params" (mainline u-boot env is in a different place) * Filesystem is now mtd2 ... vs mtd3 + Users of GIT kernels now see mtd0 and mtd1 partitions * Filesystem partition starts 640 KBytes earlier * Filesystem is now mtd2 ... vs mtd0 * Linux now *uses* the flash-resident BBT * Removes annoying slowdown/hiccup during boot * Potentially ~64KB less space available with TI/MV kernels If you *used* NAND partitions from Linux, there is no solution that's fully compatible with all previous kernels in those respects ... ergo this "best compromise". It'd be good to back back up the filesystem data; or, carry your own backwards-compatibility patch for awhile. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 42 +++++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 5387e6b20405..c039674fe99e 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,11 +16,12 @@ #include #include #include +#include #include #include #include -#include + #include #include #include @@ -113,20 +114,49 @@ static struct platform_device davinci_evm_norflash_device = { .resource = &davinci_evm_norflash_resource, }; +/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks). + * It may used instead of the (default) NOR chip to boot, using TI's + * tools to install the secondary boot loader (UBL) and U-Boot. + */ struct mtd_partition davinci_evm_nandflash_partition[] = { - /* 5 MB space at the beginning for bootloader and kernel */ + /* Bootloader layout depends on whose u-boot is installed, but we + * can hide all the details. + * - block 0 for u-boot environment ... in mainline u-boot + * - block 1 for UBL (plus up to four backup copies in blocks 2..5) + * - blocks 6...? for u-boot + * - blocks 16..23 for u-boot environment ... in TI's u-boot + */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K + SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* Kernel */ { - .name = "NAND filesystem", - .offset = 5 * SZ_1M, + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, + /* File system (older GIT kernels started this on the 5MB mark) */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0, } + /* A few blocks at end hold a flash BBT ... created by TI's CCS + * using flashwriter_nand.out, but ignored by TI's versions of + * Linux and u-boot. We boot faster by using them. + */ }; static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .options = NAND_USE_FLASH_BBT, }; static struct resource davinci_evm_nandflash_resource[] = { @@ -151,14 +181,14 @@ static struct platform_device davinci_evm_nandflash_device = { .resource = davinci_evm_nandflash_resource, }; -static u64 davinci_fb_dma_mask = DMA_32BIT_MASK; +static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32); static struct platform_device davinci_fb_device = { .name = "davincifb", .id = -1, .dev = { .dma_mask = &davinci_fb_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .num_resources = 0, }; -- cgit v1.2.3 From 28853da20c840f0d147674ac850c539d3306109f Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 27 Apr 2009 17:24:28 +0100 Subject: powerpc/86xx: Add device_type entry to soc for ppc9a The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_ppc9a.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index d47ad0718759..53a7a6255909 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; + device_type = "soc"; compatible = "fsl,mpc8641-soc", "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M -- cgit v1.2.3 From b2ad5e1e709e404dd637097411f1853d37926a6a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:53 +0100 Subject: FRV: Remove unused header asm/init.h. It seems nothing has included the frv asm/init.h header for some time, and its actual contents are out of date with include/linux/init.h. So just delete it. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/include/asm/init.h | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 arch/frv/include/asm/init.h (limited to 'arch') diff --git a/arch/frv/include/asm/init.h b/arch/frv/include/asm/init.h deleted file mode 100644 index 8b15838de216..000000000000 --- a/arch/frv/include/asm/init.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_INIT_H -#define _ASM_INIT_H - -#define __init __attribute__ ((__section__ (".text.init"))) -#define __initdata __attribute__ ((__section__ (".data.init"))) -/* For assembly routines */ -#define __INIT .section ".text.init",#alloc,#execinstr -#define __FINIT .previous -#define __INITDATA .section ".data.init",#alloc,#write - -#endif - -- cgit v1.2.3 From df1f6d200c1e20788184251c49f349b38d90889c Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 00:37:58 +0100 Subject: FRV: Use __INIT macro instead of .text.init. FRV is placing some code in the .text.init section but does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Signed-off-by: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/kernel/head-mmu-fr451.S | 3 ++- arch/frv/kernel/head-uc-fr401.S | 3 ++- arch/frv/kernel/head-uc-fr451.S | 3 ++- arch/frv/kernel/head-uc-fr555.S | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S index c8f210d84ff5..98f87d586e59 100644 --- a/arch/frv/kernel/head-mmu-fr451.S +++ b/arch/frv/kernel/head-mmu-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -31,7 +32,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S index ee282be20fff..438643cfa38e 100644 --- a/arch/frv/kernel/head-uc-fr401.S +++ b/arch/frv/kernel/head-uc-fr401.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S index b10d9c8295d2..b2a76c4a1786 100644 --- a/arch/frv/kernel/head-uc-fr451.S +++ b/arch/frv/kernel/head-uc-fr451.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -30,7 +31,7 @@ #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S index 39937c19b460..5497aaf34f77 100644 --- a/arch/frv/kernel/head-uc-fr555.S +++ b/arch/frv/kernel/head-uc-fr555.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -29,7 +30,7 @@ #define __551_LCR 0xfeff1100 #define __551_LSBR 0xfeff1c00 - .section .text.init,"ax" + __INIT .balign 4 ############################################################################### -- cgit v1.2.3 From 991da17ec0b9f396154c8120ffd10e5d7d7aa361 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:22 -0400 Subject: arm: Use __INIT macro instead of .text.init. arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Russell King Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/arm/mm/proc-v6.S | 3 ++- arch/arm/mm/proc-v7.S | 3 ++- arch/arm/mm/tlb-v6.S | 3 ++- arch/arm/mm/tlb-v7.S | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index f0cc599facb7..087e239704df 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -10,6 +10,7 @@ * * This is the "shell" of the ARMv6 processor support. */ +#include #include #include #include @@ -132,7 +133,7 @@ cpu_v6_name: .asciz "ARMv6-compatible processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v6_setup diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec42521d..c221e26ac1d3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -9,6 +9,7 @@ * * This is the "shell" of the ARMv7 processor support. */ +#include #include #include #include @@ -153,7 +154,7 @@ cpu_v7_name: .ascii "ARMv7 Processor" .align - .section ".text.init", #alloc, #execinstr + __INIT /* * __v7_setup diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 20f84bbaa9bb..73d7d89b04c4 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -10,6 +10,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -87,7 +88,7 @@ ENTRY(v6wbi_flush_kern_tlb_range) mcr p15, 0, r2, c7, c5, 4 @ prefetch flush mov pc, lr - .section ".text.init", #alloc, #execinstr + __INIT .type v6wbi_tlb_fns, #object ENTRY(v6wbi_tlb_fns) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 24ba5109f2e7..b637e7380ab7 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -11,6 +11,7 @@ * ARM architecture version 6 TLB handling functions. * These assume a split I/D TLB. */ +#include #include #include #include @@ -80,7 +81,7 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov pc, lr ENDPROC(v7wbi_flush_kern_tlb_range) - .section ".text.init", #alloc, #execinstr + __INIT .type v7wbi_tlb_fns, #object ENTRY(v7wbi_tlb_fns) -- cgit v1.2.3 From edada399e81303e85a1090b3cf0f3c5b13ff5f53 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:23 -0400 Subject: powerpc: Use TEXT_TEXT macro in linker script. Rather than adding .ref.text to the powerpc linker script so that we can use __REF on the powerpc architecture, it seems simpler to switch to using the generic TEXT_TEXT macro. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vmlinux.lds.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index d7425fffbc1c..433ae118406d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,7 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) + TEXT_TEXT + *(.fixup __ftr_alt_*) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.3 From 9203fc9c1266ed21c327f679ad05e53509dfbee1 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:24 -0400 Subject: powerpc: Use __REF macro instead of old .text.init.refok. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the powerpc architecture. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/include/asm/ppc_asm.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f59a66684aed..384d90c9c272 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -4,6 +4,7 @@ #ifndef _ASM_POWERPC_PPC_ASM_H #define _ASM_POWERPC_PPC_ASM_H +#include #include #include #include @@ -189,7 +190,7 @@ name: \ GLUE(.,name): #define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .globl name; \ .globl GLUE(.,name); \ @@ -229,7 +230,7 @@ name: \ GLUE(.,name): #define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ + __REF; \ .align 2 ; \ .section ".opd","aw"; \ name: \ -- cgit v1.2.3 From 882016ff3659126f6da50cf7cb84a0a15d00a87b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:25 -0400 Subject: sh: Use __INIT macro instead of .text.init. The sh architecture has some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott Acked-by: Sam Ravnborg Acked-by: Paul Mundt Signed-off-by: Linus Torvalds --- arch/sh/kernel/cpu/sh5/entry.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index e640c63d5811..7e49cb812f8b 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -10,6 +10,7 @@ * for more details. */ #include +#include #include #include #include @@ -2058,10 +2059,10 @@ asm_uaccess_end: /* - * --- .text.init Section + * --- .init.text Section */ - .section .text.init, "ax" + __INIT /* * void trap_init (void) -- cgit v1.2.3 From a0871e8cb8c3f5ee2ecc560ae73a35cd420440f9 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:26 -0400 Subject: sparc: cleanup references to deprecated .text.init* sections. The section .text.init.refok is deprecated and __REF (.ref.text) should be used in assembly files instead. This patch cleans up a few uses of .text.init.refok in the sparc architecture. Also fix a reference to .text.init in a comment that wasn't updated to .init.text. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head_32.S | 2 +- arch/sparc/kernel/head_64.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index e91f01a57598..6b4d8acc4c83 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -735,7 +735,7 @@ go_to_highmem: nop /* The code above should be at beginning and we have to take care about - * short jumps, as branching to .text.init section from .text is usually + * short jumps, as branching to .init.text section from .text is usually * impossible */ __INIT /* Acquire boot time privileged register values, this will help debugging. diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 3a1b7bf03cff..91bf4c7f79b9 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -467,7 +467,7 @@ jump_to_sun4u_init: jmpl %g2 + %g0, %g0 nop - .section .text.init.refok + __REF sun4u_init: BRANCH_IF_SUN4V(g1, sun4v_init) -- cgit v1.2.3 From 2e8aead1b57ede7979bd4e24797c77e181775d9c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 17 Apr 2009 08:03:01 +0000 Subject: powerpc: ppc32 needs elf_read_implies_exec() On ppc64 we implemented elf_read_implies_exec() for 32-bit binaries because old toolchains had bugs where they didn't mark program segments executable that needed to be. For some reason we didn't do this on ppc32 builds. This hadn't been an issue until commit 8d30c14c ("powerpc/mm: Rework I$/D$ coherency (v3)"), which had as a side effect that we are now enforcing execute permissions to some extent on 32-bit 4xx and Book E processors. This fixes it by defining elf_read_implies_exec on 32-bit to turn on the read-implies-exec behaviour on programs that are sufficiently old that they don't have a PT_GNU_STACK program header. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/elf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 087c22f1d368..d6b4a12cdeff 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -260,6 +260,7 @@ do { \ #else # define SET_PERSONALITY(ex) \ set_personality(PER_LINUX | (current->personality & (~PER_MASK))) +# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v1.2.3 From ff61e5ccc35b7159a50741fc4b992817785acd5c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 22 Apr 2009 22:43:03 +0000 Subject: powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB Currently PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but does not select PCI. This can lead to a config with the former and the latter disabled, which does not build. To fix this PPC_CELL_NATIVE should select PCI. However, that would force PCI on for QPACE, which also selects PPC_CELL_NATIVE. So instead move the select of PPC_OF_PLATFORM_PCI and PCI under both IBM_CELL_BLADE and CELLEB. Signed-off-by: Michael Ellerman Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 40e24c39ad06..50f17bdd3c16 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -13,7 +13,6 @@ config PPC_CELL_COMMON config PPC_CELL_NATIVE bool select PPC_CELL_COMMON - select PPC_OF_PLATFORM_PCI select MPIC select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII @@ -25,6 +24,8 @@ config PPC_IBM_CELL_BLADE bool "IBM Cell Blade" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select MMIO_NVRAM select PPC_UDBG_16550 select UDBG_RTAS_CONSOLE @@ -33,6 +34,8 @@ config PPC_CELLEB bool "Toshiba's Cell Reference Set 'Celleb' Architecture" depends on PPC64 && PPC_BOOK3S select PPC_CELL_NATIVE + select PPC_OF_PLATFORM_PCI + select PCI select HAS_TXX9_SERIAL select PPC_UDBG_BEAT select USB_OHCI_BIG_ENDIAN_MMIO -- cgit v1.2.3 From d8f48457d5af6601abdecaad7a95c45bfeef90d5 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:37 +0000 Subject: powerpc/ps3: Fix build error on UP A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the PS3 smp.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of 'smp_send_stop' include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: Subrata Modak Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/setup.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index 66181821322a..1a7b5ae0c83e 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -45,10 +45,6 @@ DEFINE_MUTEX(ps3_gpu_mutex); EXPORT_SYMBOL_GPL(ps3_gpu_mutex); -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - static union ps3_firmware_version ps3_firmware_version; void ps3_get_firmware_version(union ps3_firmware_version *v) -- cgit v1.2.3 From 13beadd91f148933f47947a88ab2c97a1ca9768d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 28 Apr 2009 11:47:15 -0400 Subject: powerpc: Revert switch to TEXT_TEXT in linker script Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: Tim Abbott Requested-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/vmlinux.lds.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 433ae118406d..a047a6cfca4d 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -54,8 +54,8 @@ SECTIONS ALIGN_FUNCTION(); HEAD_TEXT _text = .; - TEXT_TEXT - *(.fixup __ftr_alt_*) + /* careful! __ftr_alt_* sections need to be close to .text */ + *(.text .fixup __ftr_alt_* .ref.text) SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.3 From 16752e2ead535c0e616c64d3fee8401ebd0c9f62 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 Apr 2009 21:20:11 +0200 Subject: m68k: arch/m68k/kernel/sun3-head.S needs Fix this: arch/m68k/kernel/sun3-head.S: Assembler messages: arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored Introduced by commit 6f335cab0431d5df4995bcd4fd952d4c746d5a86 ("m68k: convert to use __HEAD and HEAD_TEXT macros."), which started using __HEAD without adding the appropriate include. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/kernel/sun3-head.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index 9e5c3e57c598..43036bf4aeed 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -1,4 +1,5 @@ #include +#include #include #include -- cgit v1.2.3 From 33015c85995716d03f6293346cf05a1908b0fb9a Mon Sep 17 00:00:00 2001 From: Stuart Bennett Date: Tue, 28 Apr 2009 20:17:48 +0100 Subject: tracing: x86, mmiotrace: fix range test Matching on (addr == (p->addr + p->len)) causes problems when mappings are adjacent. [ Impact: fix mmiotrace confusion on adjacent iomaps ] Signed-off-by: Stuart Bennett Acked-by: Pekka Paalanen Cc: Steven Rostedt LKML-Reference: <1240946271-7083-2-git-send-email-stuart@freedesktop.org> Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 4f115e00486b..50dc802a1c46 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) + if (addr >= p->addr && addr < (p->addr + p->len)) return p; } return NULL; -- cgit v1.2.3 From 2f65dd475c6a8a997145ea83cc3d2d5e6dc55af1 Mon Sep 17 00:00:00 2001 From: John Wright Date: Wed, 29 Apr 2009 14:32:01 -0600 Subject: x86: gettimeofday() vDSO: fix segfault when tv == NULL According to the gettimeofday(2) manual: If either tv or tz is NULL, the corresponding structure is not set or returned. Since it is legal to give NULL as the tv argument, the code should make sure tv is not NULL before trying to dereference it. This issue manifests itself on x86_64 when vdso=0 is not on the kernel command-line and libc uses the vDSO for gettimeofday() (e.g. glibc >= 2.7). A simple reproducer: #include #include int main(void) { struct timezone tz; gettimeofday(NULL, &tz); return 0; } See http://bugs.debian.org/466491 for more details. [ Impact: fix gettimeofday(NULL, &tz) segfault ] Signed-off-by: John Wright Cc: Andi Kleen Cc: John Wright LKML-Reference: <1241037121-14805-1-git-send-email-john.wright@hp.com> Signed-off-by: Ingo Molnar --- arch/x86/vdso/vclock_gettime.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index d9d35824c56f..6a40b78b46aa 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { - BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != - offsetof(struct timespec, tv_nsec) || - sizeof(*tv) != sizeof(struct timespec)); - do_realtime((struct timespec *)tv); - tv->tv_usec /= 1000; + if (likely(tv != NULL)) { + BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != + offsetof(struct timespec, tv_nsec) || + sizeof(*tv) != sizeof(struct timespec)); + do_realtime((struct timespec *)tv); + tv->tv_usec /= 1000; + } if (unlikely(tz != NULL)) { /* Avoid memcpy. Some old compilers fail to inline it */ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; -- cgit v1.2.3 From 9cba3ccc8fe77b67aff2db8f5827d7cb752ce11f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:03 +0100 Subject: [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail This patch implements the recommended workaround for erratum 411920 (ARM1136, ARM1156, ARM1176). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 9 +++++++++ arch/arm/mm/cache-v6.S | 33 +++++++++++++++++++++++++++++++++ arch/arm/mm/flush.c | 23 +++++++++++++++++++++-- 3 files changed, 63 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 99875dd06f50..e28a76bd1793 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -740,6 +740,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_411920 + bool "ARM errata: Invalidation of the Instruction Cache operation can fail" + depends on CPU_V6 && !SMP + help + Invalidation of the Instruction Cache operation can + fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. + It does not affect the MPCore. This option enables the ARM Ltd. + recommended workaround. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 2c6c2a7c05a0..8f5c13f4c936 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -20,6 +20,31 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 +#ifdef CONFIG_ARM_ERRATA_411920 +/* + * Invalidate the entire I cache (this code is a workaround for the ARM1136 + * erratum 411920 - Invalidate Instruction Cache operation can fail. This + * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted + */ +ENTRY(v6_icache_inval_all) + mov r0, #0 + mrs r1, cpsr + cpsid ifa @ disable interrupts + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache + msr cpsr_cx, r1 @ restore interrupts + .rept 11 @ ARM Ltd recommends at least + nop @ 11 NOPs + .endr + mov pc, lr +#endif + /* * v6_flush_cache_all() * @@ -31,7 +56,11 @@ ENTRY(v6_flush_kern_cache_all) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate #endif @@ -103,7 +132,11 @@ ENTRY(v6_coherent_user_range) mov r0, #0 #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c10, 4 @ drain write buffer +#ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate +#else + b v6_icache_inval_all +#endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB #endif diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4e283481cee1..c07222eb5ce0 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,6 +18,10 @@ #include "mm.h" +#ifdef CONFIG_ARM_ERRATA_411920 +extern void v6_icache_inval_all(void); +#endif + #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) asm( "mcrr p15, 0, %1, %0, c14\n" " mcr p15, 0, %2, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %2, c7, c5, 0\n" +#endif : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } void flush_cache_mm(struct mm_struct *mm) @@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } @@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" + " mcr p15, 0, %0, c7, c10, 4\n" +#ifndef CONFIG_ARM_ERRATA_411920 " mcr p15, 0, %0, c7, c5, 0\n" - " mcr p15, 0, %0, c7, c10, 4" +#endif : : "r" (0) : "cc"); +#ifdef CONFIG_ARM_ERRATA_411920 + v6_icache_inval_all(); +#endif } } -- cgit v1.2.3 From 7ce236fcd6fd45b0441a2d49acb2ceb2de2e8a47 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:09 +0100 Subject: [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2) erratum. The BTAC/BTB is now flushed at every context switch. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 16 ++++++++++++++++ arch/arm/mm/proc-v7.S | 8 ++++++++ 2 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e28a76bd1793..84e4816362b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -749,6 +749,22 @@ config ARM_ERRATA_411920 It does not affect the MPCore. This option enables the ARM Ltd. recommended workaround. +config ARM_ERRATA_430973 + bool "ARM errata: Stale prediction on replaced interworking branch" + depends on CPU_V7 + help + This option enables the workaround for the 430973 Cortex-A8 + (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb + interworking branch is replaced with another code sequence at the + same virtual address, whether due to self-modifying code or virtual + to physical address re-mapping, Cortex-A8 does not recover from the + stale interworking branch prediction. This results in Cortex-A8 + executing the new code sequence in the incorrect ARM or Thumb state. + The workaround enables the BTB/BTAC operations by setting ACTLR.IBE + and also flushes the branch target cache at every context switch. + Note that setting specific bits in the ACTLR register may not be + available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index d1ebec42521d..fc81159596fe 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -95,6 +95,9 @@ ENTRY(cpu_v7_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id orr r0, r0, #TTB_FLAGS +#ifdef CONFIG_ARM_ERRATA_430973 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB +#endif mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID isb 1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -180,6 +183,11 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} +#ifdef CONFIG_ARM_ERRATA_430973 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 6) @ set IBE to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -- cgit v1.2.3 From 855c551f5b8cc3815d58e1056c1f1e7c461e2d24 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:15 +0100 Subject: [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created This patch adds a workaround for the 458693 Cortex-A8 (r2p0) erratum. It sets the corresponding bits in the auxiliary control register so that the PLD instruction becomes a NOP. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 13 +++++++++++++ arch/arm/mm/proc-v7.S | 6 ++++++ 2 files changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84e4816362b3..49f85664083d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -765,6 +765,19 @@ config ARM_ERRATA_430973 Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_458693 + bool "ARM errata: Processor deadlock when a false hazard is created" + depends on CPU_V7 + help + This option enables the workaround for the 458693 Cortex-A8 (r2p0) + erratum. For very specific sequences of memory operations, it is + possible for a hazard condition intended for a cache line to instead + be incorrectly associated with a different cache line. This false + hazard might then cause a processor deadlock. The workaround enables + the L1 caching of the NEON accesses and disables the PLD instruction + in the ACTLR register. Note that setting specific bits in the ACTLR + register may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index fc81159596fe..370baa7a0f08 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -187,6 +187,12 @@ __v7_setup: mrc p15, 0, r10, c1, c0, 1 @ read aux control register orr r10, r10, #(1 << 6) @ set IBE to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + mrc p15, 0, r10, c1, c0, 1 @ read aux control register + orr r10, r10, #(1 << 5) @ set L1NEON to 1 + orr r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcr p15, 0, r10, c1, c0, 1 @ write aux control register #endif mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.3 From 0516e4643cd22fc9f535aef02ad1de66c382c93b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Apr 2009 17:06:20 +0100 Subject: [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It configures the L2 cache auxiliary control register so that the Write Allocate mode for the L2 cache is disabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 12 ++++++++++++ arch/arm/mm/proc-v7.S | 5 +++++ 2 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49f85664083d..9faccc411c2a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -778,6 +778,18 @@ config ARM_ERRATA_458693 in the ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_460075 + bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" + depends on CPU_V7 + help + This option enables the workaround for the 460075 Cortex-A8 (r2p0) + erratum. Any asynchronous access to the L2 cache may encounter a + situation in which recent store transactions to the L2 cache are lost + and overwritten with stale memory contents from external memory. The + workaround disables the write-allocate mode for the L2 cache via the + ACTLR register. Note that setting specific bits in the ACTLR register + may not be available in non-secure mode. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 370baa7a0f08..f2305441e7d1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -193,6 +193,11 @@ __v7_setup: orr r10, r10, #(1 << 5) @ set L1NEON to 1 orr r10, r10, #(1 << 9) @ set PLDNOP to 1 mcr p15, 0, r10, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.3 From 79af6c49a93ea80952fd42dc180c8827cd8c984c Mon Sep 17 00:00:00 2001 From: Michael Wolf Date: Mon, 27 Apr 2009 06:17:54 +0000 Subject: powerpc adjust oprofile_cpu_type version 3 Oprofile is changing the naming it is using for the compatibility modes. Instead of having compat-power, oprofile will go to family naming convention and use ibm-compat-v. Currently only ibm-compat-v1 will be defined. The notion of compatibility events just started with POWER6. So there is no way that any other tool could exist that is using these oprofile_cpu_type strings we want to change. Signed-off-by: Mike Wolf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687544f3..5e925dbffbfb 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) + if (old.oprofile_cpu_type == NULL) { t->oprofile_cpu_type = s->oprofile_cpu_type; + t->oprofile_type = s->oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; -- cgit v1.2.3 From 0203d6ec4e88062f20558fbed3cdff2af758a53b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 29 Apr 2009 19:39:38 +0000 Subject: powerpc: Fix setting of oprofile cpu type commit 2657dd4e301d4841ed67a4fac7d145ad8f3e1b28 introduced a bug where we would now always override the "real" oprofile CPU type with the "compatible" one provided by a pseudo-PVR in the device-tree which is incorrect and breaks oprofile on all current configs since the "compatible" ones aren't yet recognized. This fixes it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 5e925dbffbfb..f9c40f869c6e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1837,8 +1837,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * oprofile_cpu_type. */ if (old.oprofile_cpu_type == NULL) { - t->oprofile_cpu_type = s->oprofile_cpu_type; - t->oprofile_type = s->oprofile_type; + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; } } -- cgit v1.2.3 From c520f72172814c202ee47c51a63a1b1dde7f22f2 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 20 Apr 2009 20:02:16 +0200 Subject: avr32: drop unused CLEAN_FILES Left over from before we used arch/avr32/include Signed-off-by: Sam Ravnborg Cc: Jesper Nilsson --- arch/avr32/Makefile | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 0b97e14f73f6..c21a3290d542 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -43,8 +43,6 @@ core-y += arch/avr32/mm/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ -CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch - BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install -- cgit v1.2.3 From 5ef316fbe7fd03802b8625833884587927161c14 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 3 Feb 2009 23:48:54 +0000 Subject: [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to Add the physical address of the two I2S channel register blocks. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/map.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5a..8199972ed5bd 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) -- cgit v1.2.3 From dc8fc7edef5fe799a1c38c916d2c64b1d0fcf81a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 28 Apr 2009 10:06:00 +0100 Subject: [ARM] S3C2412: Add missing cache flush in suspend code The alterations to the suspend code missed adding a call to the cache flushing routines during the suspend path of the S3C2412. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/pm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f6..a7417c479ffe 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); -- cgit v1.2.3 From 595e8fabea22c96f674102f33b4a759f4512dd9c Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 26 Apr 2009 14:18:25 +0200 Subject: microblaze: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo-static.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index cfe44effdb77..450ca6bb828d 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -14,8 +14,8 @@ #include #include -const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; -const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; +static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY; +static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER; #define err_printk(x) \ early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n"); -- cgit v1.2.3 From c71a7a3875b40d18a08c09f6c757bd7a9b6ce894 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 Apr 2009 09:35:53 +0200 Subject: microblaze: Fix return value for sys_ipc Signed-off-by: John Linn Signed-off-by: Michal Simek --- arch/microblaze/kernel/sys_microblaze.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index ba0568c2cc1c..31905ff590b7 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth) ret = sys_shmctl(first, second, (struct shmid_ds *) ptr); break; } - return -EINVAL; + return ret; } asmlinkage int sys_vfork(struct pt_regs *regs) -- cgit v1.2.3 From f9a196b8dceba3c1e5fe885b81e45043ad7c60fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 1 May 2009 20:59:25 +0200 Subject: x86: initialize io_bitmap_base on 32bit commit db949bba3c7cf2e664ac12e237c6d4c914f0c69d (x86-32: use non-lazy io bitmap context switching) broke ioperm for 32bit because it removed the lazy initialization of io_bitmap_base and did not set it to the real bitmap offset. [ Impact: fix non-working sys_ioperm() on 32-bit kernels ] Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f667896c28..c1caefc82e62 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void) load_TR_desc(); load_LDT(&init_mm.context); + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + #ifdef CONFIG_DOUBLEFAULT /* Set up doublefault TSS pointer in the GDT */ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); -- cgit v1.2.3 From 6f0aced639d346e5f54eea9fcb2784b633493d09 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Fri, 1 May 2009 23:54:25 +0400 Subject: x86, apic: use pr_ macro Replace recenly appeared printk with pr_ macro (the file already use a lot of them). [ Impact: cleanup ] Signed-off-by: Cyrill Gorcunov LKML-Reference: <20090501195425.GB4633@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 28f747d61d78..e258bedce7cb 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -2191,7 +2191,7 @@ static int __cpuinit set_multi(const struct dmi_system_id *d) { if (multi) return 0; - printk(KERN_INFO "APIC: %s detected, Multi Chassis\n", d->ident); + pr_info("APIC: %s detected, Multi Chassis\n", d->ident); multi = 1; return 0; } -- cgit v1.2.3 From 9c88b06dc7589fb0bccd617c4659066fb803cfda Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 20:29:00 +0900 Subject: m32r: build fix for __stringify macro This patch fixes the following build error of 2.6.30-rc3-git2: AS arch/m32r/kernel/head.o In file included from /include/linux/init.h:7, from /arch/m32r/kernel/head.S:11: /include/linux/stringify.h:9: error: syntax error in macro parameter list /include/linux/stringify.h:10: error: syntax error in macro parameter list This build error was caused at __HEAD macro in arch/m32r/kernel/head.S, which uses __stringify() macro. Remove -traditional option from EXTRA_AFLAGS for the m32r, because the __stringify() macro depends on the gcc's variadic macro extension function, due to commit: Make __stringify support variable argument macros too commit: 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Signed-off-by: Hirokazu Takata --- arch/m32r/boot/compressed/Makefile | 1 - arch/m32r/kernel/Makefile | 2 -- 2 files changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index d908e1d3c07f..560484ae35ec 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ piggy.o vmlinux.lds -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head.o $(obj)/misc.o diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index 09200d4886e3..b1a4b6036591 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_MODULES) += module.o - -EXTRA_AFLAGS := -traditional -- cgit v1.2.3 From 9cd67243de582c206758adff152c5fcc1b2aa069 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Sat, 2 May 2009 22:08:33 +0900 Subject: m32r: use __stringify() macro in assembler.h Replace #x with __stringify(x). Also, #ifndef __STR is removed and undefine __STR macro at the beginning. The __STR() macro is still remained, because the assembler.h might be included from assembly codes as well as C codes. Signed-off-by: Hirokazu Takata --- arch/m32r/include/asm/assembler.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h index 26351539b5ff..728799fc70aa 100644 --- a/arch/m32r/include/asm/assembler.h +++ b/arch/m32r/include/asm/assembler.h @@ -9,14 +9,15 @@ * This file contains M32R architecture specific macro definitions. */ +#include + +#undef __STR -#ifndef __STR #ifdef __ASSEMBLY__ #define __STR(x) x #else -#define __STR(x) #x +#define __STR(x) __stringify(x) #endif -#endif /* __STR */ #ifdef CONFIG_SMP #define M32R_LOCK __STR(lock) -- cgit v1.2.3 From 1ffb1c0c64b4a2b75eed1f63cc47f2beb711c92f Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:45 -0700 Subject: alpha: titan and marvel build fixes These platforms got broken after u64 => 'long long' conversion. Apparently that change was compile-tested with 'make allmodconfig', but it doesn't include systems that depend on !ALPHA_LEGACY_START_ADDRESS. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/kernel/err_ev6.c | 2 +- arch/alpha/kernel/err_ev7.c | 4 ++-- arch/alpha/kernel/err_impl.h | 10 +++++----- arch/alpha/kernel/err_marvel.c | 2 +- arch/alpha/kernel/err_titan.c | 4 ++-- arch/alpha/kernel/proto.h | 5 ++--- 6 files changed, 13 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c index 985e5c1681ac..8ca6345bf131 100644 --- a/arch/alpha/kernel/err_ev6.c +++ b/arch/alpha/kernel/err_ev6.c @@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print) } void -ev6_machine_check(u64 vector, u64 la_ptr) +ev6_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index 73770c6ca013..d738a67112d4 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr, } void -ev7_machine_check(u64 vector, u64 la_ptr) +ev7_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; char *saved_err_prefix = err_print_prefix; @@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) switch(header->type) { case EL_TYPE__PAL__LOGOUT_FRAME: - printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n", + printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n", err_print_prefix, packet->by_type.logout.whami, packet->by_type.logout.rbox_whami); diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h index 3c12258158e6..0c010ca4611e 100644 --- a/arch/alpha/kernel/err_impl.h +++ b/arch/alpha/kernel/err_impl.h @@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets * ev7_collect_logout_frame_subpackets(struct el_subpacket *, struct ev7_lf_subpackets *); extern void ev7_register_error_handlers(void); -extern void ev7_machine_check(u64, u64); +extern void ev7_machine_check(unsigned long, unsigned long); /* * err_ev6.c */ extern void ev6_register_error_handlers(void); extern int ev6_process_logout_frame(struct el_common *, int); -extern void ev6_machine_check(u64, u64); +extern void ev6_machine_check(unsigned long, unsigned long); /* * err_marvel.c */ -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_register_error_handlers(void); /* * err_titan.c */ extern int titan_process_logout_frame(struct el_common *, int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_register_error_handlers(void); extern int privateer_process_logout_frame(struct el_common *, int); -extern void privateer_machine_check(u64, u64); +extern void privateer_machine_check(unsigned long, unsigned long); diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 6bfd243efba3..52a79dfc13c6 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print) } void -marvel_machine_check(u64 vector, u64 la_ptr) +marvel_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr; int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL; diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index c7e28a88d6e3..f7ed97ce0dfd 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print) } void -titan_machine_check(u64 vector, u64 la_ptr) +titan_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = @@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print) } void -privateer_machine_check(u64 vector, u64 la_ptr) +privateer_machine_check(unsigned long vector, unsigned long la_ptr) { struct el_common *mchk_header = (struct el_common *)la_ptr; struct el_TITAN_sysdata_mcheck *tmchk = diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h index 567f2598d090..3d2627ec9860 100644 --- a/arch/alpha/kernel/proto.h +++ b/arch/alpha/kernel/proto.h @@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops irongate_pci_ops; extern int irongate_pci_clr_err(void); extern void irongate_init_arch(void); -extern void irongate_machine_check(u64, u64); #define irongate_pci_tbi ((void *)0) /* core_lca.c */ @@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops marvel_pci_ops; extern void marvel_init_arch(void); extern void marvel_kill_arch(int); -extern void marvel_machine_check(u64, u64); +extern void marvel_machine_check(unsigned long, unsigned long); extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern int marvel_pa_to_nid(unsigned long); extern int marvel_cpuid_to_nid(int); @@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct pci_ops titan_pci_ops; extern void titan_init_arch(void); extern void titan_kill_arch(int); -extern void titan_machine_check(u64, u64); +extern void titan_machine_check(unsigned long, unsigned long); extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t); extern struct _alpha_agp_info *titan_agp_info(void); -- cgit v1.2.3 From 08a42e86bce511b45ca3eee40f51674b02a777d1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:47 -0700 Subject: alpha: exception table sorting Exception fixups for sections other than .text (like one in futex_init()) break the natural ordering of fixup entries, so sorting is required. Without that the result of the exception table search depends on phase of the moon. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/uaccess.h | 2 ++ arch/alpha/mm/extable.c | 40 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index 163f3053001c..b49ec2f8d6e3 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -507,5 +507,7 @@ struct exception_table_entry (pc) + (_fixup)->fixup.bits.nextinsn; \ }) +#define ARCH_HAS_SORT_EXTABLE +#define ARCH_HAS_SEARCH_EXTABLE #endif /* __ALPHA_UACCESS_H */ diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c index dc7aeda15773..62dc379d301a 100644 --- a/arch/alpha/mm/extable.c +++ b/arch/alpha/mm/extable.c @@ -3,11 +3,49 @@ */ #include +#include #include +static inline unsigned long ex_to_addr(const struct exception_table_entry *x) +{ + return (unsigned long)&x->insn + x->insn; +} + +static void swap_ex(void *a, void *b, int size) +{ + struct exception_table_entry *ex_a = a, *ex_b = b; + unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b); + unsigned int t = ex_a->fixup.unit; + + ex_a->fixup.unit = ex_b->fixup.unit; + ex_b->fixup.unit = t; + ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn); + ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn); +} + +/* + * The exception table needs to be sorted so that the binary + * search that we use to find entries in it works properly. + * This is used both for the kernel exception table and for + * the exception tables of modules that get loaded. + */ +static int cmp_ex(const void *a, const void *b) +{ + const struct exception_table_entry *x = a, *y = b; + + /* avoid overflow */ + if (ex_to_addr(x) > ex_to_addr(y)) + return 1; + if (ex_to_addr(x) < ex_to_addr(y)) + return -1; + return 0; +} + void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish) { + sort(start, finish - start, sizeof(struct exception_table_entry), + cmp_ex, swap_ex); } const struct exception_table_entry * @@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first, unsigned long mid_value; mid = (last - first) / 2 + first; - mid_value = (unsigned long)&mid->insn + mid->insn; + mid_value = ex_to_addr(mid); if (mid_value == value) return mid; else if (mid_value < value) -- cgit v1.2.3 From 77b4cf5cb0c9d6010a18030a0e0a8d2aaf6b43ec Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:48 -0700 Subject: alpha: futex implementation Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/barrier.h | 2 + arch/alpha/include/asm/futex.h | 118 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 116 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h index ac78eba909bc..ce8860a0b32d 100644 --- a/arch/alpha/include/asm/barrier.h +++ b/arch/alpha/include/asm/barrier.h @@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory") __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP +#define __ASM_SMP_MB "\tmb\n" #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() #else +#define __ASM_SMP_MB #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h index 6a332a9f099c..945de222ab91 100644 --- a/arch/alpha/include/asm/futex.h +++ b/arch/alpha/include/asm/futex.h @@ -1,6 +1,116 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _ASM_ALPHA_FUTEX_H +#define _ASM_ALPHA_FUTEX_H -#include +#ifdef __KERNEL__ -#endif +#include +#include +#include +#include + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + __ASM_SMP_MB \ + "1: ldl_l %0,0(%2)\n" \ + insn \ + "2: stl_c %1,0(%2)\n" \ + " beq %1,4f\n" \ + " mov $31,%1\n" \ + "3: .subsection 2\n" \ + "4: br 1b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .long 1b-.\n" \ + " lda $31,3b-1b(%1)\n" \ + " .long 2b-.\n" \ + " lda $31,3b-2b(%1)\n" \ + " .previous\n" \ + : "=&r" (oldval), "=&r"(ret) \ + : "r" (uaddr), "r"(oparg) \ + : "memory") + +static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ( + __ASM_SMP_MB + "1: ldl_l %0,0(%2)\n" + " cmpeq %0,%3,%1\n" + " beq %1,3f\n" + " mov %4,%1\n" + "2: stl_c %1,0(%2)\n" + " beq %1,4f\n" + "3: .subsection 2\n" + "4: br 1b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .long 1b-.\n" + " lda $31,3b-1b(%0)\n" + " .long 2b-.\n" + " lda $31,3b-2b(%0)\n" + " .previous\n" + : "=&r"(prev), "=&r"(cmp) + : "r"(uaddr), "r"((long)oldval), "r"(newval) + : "memory"); + + return prev; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_ALPHA_FUTEX_H */ -- cgit v1.2.3 From 74641f584da8eccf30becfbb5507ab457187db22 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:49 -0700 Subject: alpha: binfmt_aout fix This fixes the problem introduced by commit 3bfacef412 (get rid of special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults when binfmt_aout built as module. That happens because aout binary handler gets on the top of the binfmt list due to late registration, and kernel attempts to execute the binary without preparatory work that must be done by binfmt_loader. Fixed by changing the registration order of the default binfmt handlers using list_add_tail() and introducing insert_binfmt() function which places new handler on the top of the binfmt list. This might be generally useful for installing arch-specific frontends for default handlers or just for overriding them. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- arch/alpha/kernel/Makefile | 6 +++++- arch/alpha/kernel/binfmt_loader.c | 2 +- fs/exec.c | 7 ++++--- include/linux/binfmts.h | 14 +++++++++++++- 4 files changed, 23 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile index a427538252f8..7739a62440a7 100644 --- a/arch/alpha/kernel/Makefile +++ b/arch/alpha/kernel/Makefile @@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \ irq_alpha.o signal.o setup.o ptrace.o time.o \ - alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o + alpha_ksyms.o systbls.o err_common.o io.o obj-$(CONFIG_VGA_HOSE) += console.o obj-$(CONFIG_SMP) += smp.o @@ -43,6 +43,10 @@ else # Misc support obj-$(CONFIG_ALPHA_SRM) += srmcons.o +ifdef CONFIG_BINFMT_AOUT +obj-y += binfmt_loader.o +endif + # Core logic support obj-$(CONFIG_ALPHA_APECS) += core_apecs.o obj-$(CONFIG_ALPHA_CIA) += core_cia.o diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c index 4a0af906b00a..3fcfad410130 100644 --- a/arch/alpha/kernel/binfmt_loader.c +++ b/arch/alpha/kernel/binfmt_loader.c @@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = { static int __init init_loader_binfmt(void) { - return register_binfmt(&loader_format); + return insert_binfmt(&loader_format); } arch_initcall(init_loader_binfmt); diff --git a/fs/exec.c b/fs/exec.c index a3a8ce83940f..639177b0eeac 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -69,17 +69,18 @@ int suid_dumpable = 0; static LIST_HEAD(formats); static DEFINE_RWLOCK(binfmt_lock); -int register_binfmt(struct linux_binfmt * fmt) +int __register_binfmt(struct linux_binfmt * fmt, int insert) { if (!fmt) return -EINVAL; write_lock(&binfmt_lock); - list_add(&fmt->lh, &formats); + insert ? list_add(&fmt->lh, &formats) : + list_add_tail(&fmt->lh, &formats); write_unlock(&binfmt_lock); return 0; } -EXPORT_SYMBOL(register_binfmt); +EXPORT_SYMBOL(__register_binfmt); void unregister_binfmt(struct linux_binfmt * fmt) { diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 6638b8148de7..61ee18c1bdb4 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -82,7 +82,19 @@ struct linux_binfmt { int hasvdso; }; -extern int register_binfmt(struct linux_binfmt *); +extern int __register_binfmt(struct linux_binfmt *fmt, int insert); + +/* Registration of default binfmt handlers */ +static inline int register_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 0); +} +/* Same as above, but adds a new binfmt at the top of the list */ +static inline int insert_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 1); +} + extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); -- cgit v1.2.3 From 0763ed2355198cdef2f6a2098e9d52eb1fe4365d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 30 Apr 2009 15:08:50 -0700 Subject: of: make of_(un)register_platform_driver common code Some drivers using of_register_platform_driver() wrapper break on sparc because the wrapper isn't in the header file. This patch moves it from Microblaze and PowerPC implementations and makes it common code. Fixes this sparc64 allmodconfig build error (at least): drivers/leds/leds-gpio.c: In function `gpio_led_init': drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver' drivers/leds/leds-gpio.c: In function `gpio_led_exit': drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver' Signed-off-by: Grant Likely Acked-by: David S. Miller Cc: Michal Simek Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/microblaze/include/asm/of_platform.h | 10 ---------- arch/powerpc/include/asm/of_platform.h | 10 ---------- include/linux/of_platform.h | 10 ++++++++++ 3 files changed, 10 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h index 187c0eedaece..37491276c6ca 100644 --- a/arch/microblaze/include/asm/of_platform.h +++ b/arch/microblaze/include/asm/of_platform.h @@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = { {}, }; -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h index 53b46507ffde..d4aaa3489440 100644 --- a/arch/powerpc/include/asm/of_platform.h +++ b/arch/powerpc/include/asm/of_platform.h @@ -11,16 +11,6 @@ * */ -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - /* Platform devices and busses creation */ extern struct of_device *of_platform_device_create(struct device_node *np, const char *bus_id, diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3d327b67d7e2..908406651330 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus); extern void of_unregister_driver(struct of_platform_driver *drv); +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + #include extern struct of_device *of_find_device_by_node(struct device_node *np); -- cgit v1.2.3 From 9fffb55f66127b52c937ede5196ebfa0c0d50bce Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 30 Apr 2009 15:25:53 +1000 Subject: Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc The powerpc kernel always requires an Open Firmware like device tree to supply device information. On systems without OF, this comes from a flattened device tree blob. This blob is usually generated by dtc, a tool which compiles a text description of the device tree into the flattened format used by the kernel. Sometimes, the bootwrapper makes small changes to the pre-compiled device tree blob (e.g. filling in the size of RAM). To do this it uses the libfdt library. Because these are only used on powerpc, the code for both these tools is included under arch/powerpc/boot (these were imported and are periodically updated from the upstream dtc tree). However, the microblaze architecture, currently being prepared for merging to mainline also uses dtc to produce device tree blobs. A few other archs have also mentioned some interest in using dtc. Therefore, this patch moves dtc and libfdt from arch/powerpc into scripts, where it can be used by any architecture. The vast bulk of this patch is a literal move, the rest is adjusting the various Makefiles to use dtc and libfdt correctly from their new locations. Signed-off-by: David Gibson Signed-off-by: Linus Torvalds --- arch/powerpc/Kconfig | 4 + arch/powerpc/boot/Makefile | 67 +- arch/powerpc/boot/dtc-src/Makefile.dtc | 9 - arch/powerpc/boot/dtc-src/checks.c | 587 ------ arch/powerpc/boot/dtc-src/data.c | 321 --- arch/powerpc/boot/dtc-src/dtc-lexer.l | 320 --- arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped | 2187 -------------------- arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped | 2040 ------------------ arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped | 113 - arch/powerpc/boot/dtc-src/dtc-parser.y | 379 ---- arch/powerpc/boot/dtc-src/dtc.c | 226 -- arch/powerpc/boot/dtc-src/dtc.h | 246 --- arch/powerpc/boot/dtc-src/flattree.c | 906 -------- arch/powerpc/boot/dtc-src/fstree.c | 92 - arch/powerpc/boot/dtc-src/libfdt_env.h | 23 - arch/powerpc/boot/dtc-src/livetree.c | 308 --- arch/powerpc/boot/dtc-src/srcpos.c | 116 -- arch/powerpc/boot/dtc-src/srcpos.h | 85 - arch/powerpc/boot/dtc-src/treesource.c | 278 --- arch/powerpc/boot/dtc-src/version_gen.h | 1 - arch/powerpc/boot/libfdt/Makefile.libfdt | 8 - arch/powerpc/boot/libfdt/fdt.c | 201 -- arch/powerpc/boot/libfdt/fdt.h | 60 - arch/powerpc/boot/libfdt/fdt_ro.c | 469 ----- arch/powerpc/boot/libfdt/fdt_rw.c | 463 ----- arch/powerpc/boot/libfdt/fdt_strerror.c | 96 - arch/powerpc/boot/libfdt/fdt_sw.c | 257 --- arch/powerpc/boot/libfdt/fdt_wip.c | 145 -- arch/powerpc/boot/libfdt/libfdt.h | 1076 ---------- arch/powerpc/boot/libfdt/libfdt_internal.h | 95 - arch/powerpc/boot/simpleboot.c | 2 +- scripts/Makefile | 1 + scripts/dtc/Makefile | 54 + scripts/dtc/Makefile.dtc | 9 + scripts/dtc/checks.c | 587 ++++++ scripts/dtc/data.c | 321 +++ scripts/dtc/dtc-lexer.l | 320 +++ scripts/dtc/dtc-lexer.lex.c_shipped | 2187 ++++++++++++++++++++ scripts/dtc/dtc-parser.tab.c_shipped | 2040 ++++++++++++++++++ scripts/dtc/dtc-parser.tab.h_shipped | 113 + scripts/dtc/dtc-parser.y | 379 ++++ scripts/dtc/dtc.c | 226 ++ scripts/dtc/dtc.h | 246 +++ scripts/dtc/flattree.c | 906 ++++++++ scripts/dtc/fstree.c | 92 + scripts/dtc/libfdt/Makefile.libfdt | 8 + scripts/dtc/libfdt/fdt.c | 201 ++ scripts/dtc/libfdt/fdt.h | 60 + scripts/dtc/libfdt/fdt_ro.c | 469 +++++ scripts/dtc/libfdt/fdt_rw.c | 463 +++++ scripts/dtc/libfdt/fdt_strerror.c | 96 + scripts/dtc/libfdt/fdt_sw.c | 257 +++ scripts/dtc/libfdt/fdt_wip.c | 145 ++ scripts/dtc/libfdt/libfdt.h | 1076 ++++++++++ scripts/dtc/libfdt/libfdt_env.h | 23 + scripts/dtc/libfdt/libfdt_internal.h | 95 + scripts/dtc/livetree.c | 308 +++ scripts/dtc/srcpos.c | 116 ++ scripts/dtc/srcpos.h | 85 + scripts/dtc/treesource.c | 278 +++ scripts/dtc/version_gen.h | 1 + 61 files changed, 11190 insertions(+), 11152 deletions(-) delete mode 100644 arch/powerpc/boot/dtc-src/Makefile.dtc delete mode 100644 arch/powerpc/boot/dtc-src/checks.c delete mode 100644 arch/powerpc/boot/dtc-src/data.c delete mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.l delete mode 100644 arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped delete mode 100644 arch/powerpc/boot/dtc-src/dtc-parser.y delete mode 100644 arch/powerpc/boot/dtc-src/dtc.c delete mode 100644 arch/powerpc/boot/dtc-src/dtc.h delete mode 100644 arch/powerpc/boot/dtc-src/flattree.c delete mode 100644 arch/powerpc/boot/dtc-src/fstree.c delete mode 100644 arch/powerpc/boot/dtc-src/libfdt_env.h delete mode 100644 arch/powerpc/boot/dtc-src/livetree.c delete mode 100644 arch/powerpc/boot/dtc-src/srcpos.c delete mode 100644 arch/powerpc/boot/dtc-src/srcpos.h delete mode 100644 arch/powerpc/boot/dtc-src/treesource.c delete mode 100644 arch/powerpc/boot/dtc-src/version_gen.h delete mode 100644 arch/powerpc/boot/libfdt/Makefile.libfdt delete mode 100644 arch/powerpc/boot/libfdt/fdt.c delete mode 100644 arch/powerpc/boot/libfdt/fdt.h delete mode 100644 arch/powerpc/boot/libfdt/fdt_ro.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_rw.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_strerror.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_sw.c delete mode 100644 arch/powerpc/boot/libfdt/fdt_wip.c delete mode 100644 arch/powerpc/boot/libfdt/libfdt.h delete mode 100644 arch/powerpc/boot/libfdt/libfdt_internal.h create mode 100644 scripts/dtc/Makefile create mode 100644 scripts/dtc/Makefile.dtc create mode 100644 scripts/dtc/checks.c create mode 100644 scripts/dtc/data.c create mode 100644 scripts/dtc/dtc-lexer.l create mode 100644 scripts/dtc/dtc-lexer.lex.c_shipped create mode 100644 scripts/dtc/dtc-parser.tab.c_shipped create mode 100644 scripts/dtc/dtc-parser.tab.h_shipped create mode 100644 scripts/dtc/dtc-parser.y create mode 100644 scripts/dtc/dtc.c create mode 100644 scripts/dtc/dtc.h create mode 100644 scripts/dtc/flattree.c create mode 100644 scripts/dtc/fstree.c create mode 100644 scripts/dtc/libfdt/Makefile.libfdt create mode 100644 scripts/dtc/libfdt/fdt.c create mode 100644 scripts/dtc/libfdt/fdt.h create mode 100644 scripts/dtc/libfdt/fdt_ro.c create mode 100644 scripts/dtc/libfdt/fdt_rw.c create mode 100644 scripts/dtc/libfdt/fdt_strerror.c create mode 100644 scripts/dtc/libfdt/fdt_sw.c create mode 100644 scripts/dtc/libfdt/fdt_wip.c create mode 100644 scripts/dtc/libfdt/libfdt.h create mode 100644 scripts/dtc/libfdt/libfdt_env.h create mode 100644 scripts/dtc/libfdt/libfdt_internal.h create mode 100644 scripts/dtc/livetree.c create mode 100644 scripts/dtc/srcpos.c create mode 100644 scripts/dtc/srcpos.h create mode 100644 scripts/dtc/treesource.c create mode 100644 scripts/dtc/version_gen.h (limited to 'arch') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 4c7804551362..a0d1146a0578 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION default y if PMAC_APM_EMU bool +config DTC + bool + default y + config DEFAULT_UIMAGE bool help diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb67c51..8da2bf963b57 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) DTS_FLAGS ?= -p 1024 @@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +libfdtheader := fdt.h libfdt.h libfdt_internal.h + +$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \ + $(addprefix $(obj)/,$(libfdtheader)) + src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ - $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ + $(libfdt) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ @@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% $(call cmd,copy_zliblinuxheader) +quiet_cmd_copy_libfdt = COPY $@ + cmd_copy_libfdt = cp $< $@ + +$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% + $(call cmd,copy_libfdt) + $(obj)/empty.c: @touch $@ @@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ + $(libfdt) $(libfdtheader) \ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ @@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@ quiet_cmd_bootar = BOOTAR $@ cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ +$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE + $(call if_changed_dep,bootcc) $(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,bootcc) @@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote addRamDisk hack-coff mktree dtc +hostprogs-y := addnote addRamDisk hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ @@ -133,46 +147,9 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ dtstree := $(srctree)/$(src)/dts wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE -############# -# Bits for building dtc -# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output - -dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o -dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o -dtc-objs := $(addprefix dtc-src/, $(dtc-objs)) - -# prerequisites on generated files needs to be explicit -$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h -$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h - -HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/ - -targets += dtc-src/dtc-parser.tab.c -targets += dtc-src/dtc-lexer.lex.c - -clean-files += dtc-src/dtc-parser.tab.h - -ifdef DTC_GENPARSER -BISON = bison -FLEX = flex - -quiet_cmd_bison = BISON $@ - cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped -quiet_cmd_flex = FLEX $@ - cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped - -$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE - $(call if_changed,bison) - -$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c - -$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE - $(call if_changed,flex) -endif - ############# # Bits for building various flavours of zImage @@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc - $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +DTC = $(objtree)/scripts/dtc/dtc + +$(obj)/%.dtb: $(dtstree)/%.dts + $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/arch/powerpc/boot/dtc-src/Makefile.dtc deleted file mode 100644 index 6ddf9ecac669..000000000000 --- a/arch/powerpc/boot/dtc-src/Makefile.dtc +++ /dev/null @@ -1,9 +0,0 @@ -# Makefile.dtc -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ - checks.c -DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c -DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/dtc-src/checks.c b/arch/powerpc/boot/dtc-src/checks.c deleted file mode 100644 index 95485796f253..000000000000 --- a/arch/powerpc/boot/dtc-src/checks.c +++ /dev/null @@ -1,587 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2007. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#ifdef TRACE_CHECKS -#define TRACE(c, ...) \ - do { \ - fprintf(stderr, "=== %s: ", (c)->name); \ - fprintf(stderr, __VA_ARGS__); \ - fprintf(stderr, "\n"); \ - } while (0) -#else -#define TRACE(c, fmt, ...) do { } while (0) -#endif - -enum checklevel { - IGNORE = 0, - WARN = 1, - ERROR = 2, -}; - -enum checkstatus { - UNCHECKED = 0, - PREREQ, - PASSED, - FAILED, -}; - -struct check; - -typedef void (*tree_check_fn)(struct check *c, struct node *dt); -typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); -typedef void (*prop_check_fn)(struct check *c, struct node *dt, - struct node *node, struct property *prop); - -struct check { - const char *name; - tree_check_fn tree_fn; - node_check_fn node_fn; - prop_check_fn prop_fn; - void *data; - enum checklevel level; - enum checkstatus status; - int inprogress; - int num_prereqs; - struct check **prereq; -}; - -#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ - static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ - static struct check nm = { \ - .name = #nm, \ - .tree_fn = (tfn), \ - .node_fn = (nfn), \ - .prop_fn = (pfn), \ - .data = (d), \ - .level = (lvl), \ - .status = UNCHECKED, \ - .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ - .prereq = nm##_prereqs, \ - }; - -#define TREE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) -#define NODE_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) -#define PROP_CHECK(nm, d, lvl, ...) \ - CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) -#define BATCH_CHECK(nm, lvl, ...) \ - CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) - -#ifdef __GNUC__ -static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); -#endif -static inline void check_msg(struct check *c, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - - if ((c->level < WARN) || (c->level <= quiet)) - return; /* Suppress message */ - - fprintf(stderr, "%s (%s): ", - (c->level == ERROR) ? "ERROR" : "Warning", c->name); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); -} - -#define FAIL(c, ...) \ - do { \ - TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ - (c)->status = FAILED; \ - check_msg((c), __VA_ARGS__); \ - } while (0) - -static void check_nodes_props(struct check *c, struct node *dt, struct node *node) -{ - struct node *child; - struct property *prop; - - TRACE(c, "%s", node->fullpath); - if (c->node_fn) - c->node_fn(c, dt, node); - - if (c->prop_fn) - for_each_property(node, prop) { - TRACE(c, "%s\t'%s'", node->fullpath, prop->name); - c->prop_fn(c, dt, node, prop); - } - - for_each_child(node, child) - check_nodes_props(c, dt, child); -} - -static int run_check(struct check *c, struct node *dt) -{ - int error = 0; - int i; - - assert(!c->inprogress); - - if (c->status != UNCHECKED) - goto out; - - c->inprogress = 1; - - for (i = 0; i < c->num_prereqs; i++) { - struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); - if (prq->status != PASSED) { - c->status = PREREQ; - check_msg(c, "Failed prerequisite '%s'", - c->prereq[i]->name); - } - } - - if (c->status != UNCHECKED) - goto out; - - if (c->node_fn || c->prop_fn) - check_nodes_props(c, dt, dt); - - if (c->tree_fn) - c->tree_fn(c, dt); - if (c->status == UNCHECKED) - c->status = PASSED; - - TRACE(c, "\tCompleted, status %d", c->status); - -out: - c->inprogress = 0; - if ((c->status != PASSED) && (c->level == ERROR)) - error = 1; - return error; -} - -/* - * Utility check functions - */ - -static void check_is_string(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (!data_is_one_string(prop->val)) - FAIL(c, "\"%s\" property in %s is not a string", - propname, node->fullpath); -} -#define CHECK_IS_STRING(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) - -static void check_is_cell(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - char *propname = c->data; - - prop = get_property(node, propname); - if (!prop) - return; /* Not present, assumed ok */ - - if (prop->val.len != sizeof(cell_t)) - FAIL(c, "\"%s\" property in %s is not a single cell", - propname, node->fullpath); -} -#define CHECK_IS_CELL(nm, propname, lvl) \ - CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) - -/* - * Structural check functions - */ - -static void check_duplicate_node_names(struct check *c, struct node *dt, - struct node *node) -{ - struct node *child, *child2; - - for_each_child(node, child) - for (child2 = child->next_sibling; - child2; - child2 = child2->next_sibling) - if (streq(child->name, child2->name)) - FAIL(c, "Duplicate node name %s", - child->fullpath); -} -NODE_CHECK(duplicate_node_names, NULL, ERROR); - -static void check_duplicate_property_names(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop, *prop2; - - for_each_property(node, prop) - for (prop2 = prop->next; prop2; prop2 = prop2->next) - if (streq(prop->name, prop2->name)) - FAIL(c, "Duplicate property name %s in %s", - prop->name, node->fullpath); -} -NODE_CHECK(duplicate_property_names, NULL, ERROR); - -#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" -#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" -#define DIGITS "0123456789" -#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" - -static void check_node_name_chars(struct check *c, struct node *dt, - struct node *node) -{ - int n = strspn(node->name, c->data); - - if (n < strlen(node->name)) - FAIL(c, "Bad character '%c' in node %s", - node->name[n], node->fullpath); -} -NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); - -static void check_node_name_format(struct check *c, struct node *dt, - struct node *node) -{ - if (strchr(get_unitname(node), '@')) - FAIL(c, "Node %s has multiple '@' characters in name", - node->fullpath); -} -NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); - -static void check_property_name_chars(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - int n = strspn(prop->name, c->data); - - if (n < strlen(prop->name)) - FAIL(c, "Bad character '%c' in property name \"%s\", node %s", - prop->name[n], prop->name, node->fullpath); -} -PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); - -static void check_explicit_phandles(struct check *c, struct node *root, - struct node *node) -{ - struct property *prop; - struct node *other; - cell_t phandle; - - prop = get_property(node, "linux,phandle"); - if (! prop) - return; /* No phandle, that's fine */ - - if (prop->val.len != sizeof(cell_t)) { - FAIL(c, "%s has bad length (%d) linux,phandle property", - node->fullpath, prop->val.len); - return; - } - - phandle = propval_cell(prop); - if ((phandle == 0) || (phandle == -1)) { - FAIL(c, "%s has invalid linux,phandle value 0x%x", - node->fullpath, phandle); - return; - } - - other = get_node_by_phandle(root, phandle); - if (other) { - FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", - node->fullpath, phandle, other->fullpath); - return; - } - - node->phandle = phandle; -} -NODE_CHECK(explicit_phandles, NULL, ERROR); - -static void check_name_properties(struct check *c, struct node *root, - struct node *node) -{ - struct property **pp, *prop = NULL; - - for (pp = &node->proplist; *pp; pp = &((*pp)->next)) - if (streq((*pp)->name, "name")) { - prop = *pp; - break; - } - - if (!prop) - return; /* No name property, that's fine */ - - if ((prop->val.len != node->basenamelen+1) - || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { - FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" - " of base node name)", node->fullpath, prop->val.val); - } else { - /* The name property is correct, and therefore redundant. - * Delete it */ - *pp = prop->next; - free(prop->name); - data_free(prop->val); - free(prop); - } -} -CHECK_IS_STRING(name_is_string, "name", ERROR); -NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); - -/* - * Reference fixup functions - */ - -static void fixup_phandle_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - cell_t phandle; - - for_each_marker_of_type(m, REF_PHANDLE) { - assert(m->offset + sizeof(cell_t) <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - phandle = get_node_phandle(dt, refnode); - *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); - } -} -CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, - &duplicate_node_names, &explicit_phandles); - -static void fixup_path_references(struct check *c, struct node *dt, - struct node *node, struct property *prop) -{ - struct marker *m = prop->val.markers; - struct node *refnode; - char *path; - - for_each_marker_of_type(m, REF_PATH) { - assert(m->offset <= prop->val.len); - - refnode = get_node_by_ref(dt, m->ref); - if (!refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); - continue; - } - - path = refnode->fullpath; - prop->val = data_insert_at_marker(prop->val, m, path, - strlen(path) + 1); - } -} -CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, - &duplicate_node_names); - -/* - * Semantic checks - */ -CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); -CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); -CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); - -CHECK_IS_STRING(device_type_is_string, "device_type", WARN); -CHECK_IS_STRING(model_is_string, "model", WARN); -CHECK_IS_STRING(status_is_string, "status", WARN); - -static void fixup_addr_size_cells(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - - node->addr_cells = -1; - node->size_cells = -1; - - prop = get_property(node, "#address-cells"); - if (prop) - node->addr_cells = propval_cell(prop); - - prop = get_property(node, "#size-cells"); - if (prop) - node->size_cells = propval_cell(prop); -} -CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, - &address_cells_is_cell, &size_cells_is_cell); - -#define node_addr_cells(n) \ - (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) -#define node_size_cells(n) \ - (((n)->size_cells == -1) ? 1 : (n)->size_cells) - -static void check_reg_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int addr_cells, size_cells, entrylen; - - prop = get_property(node, "reg"); - if (!prop) - return; /* No "reg", that's fine */ - - if (!node->parent) { - FAIL(c, "Root node has a \"reg\" property"); - return; - } - - if (prop->val.len == 0) - FAIL(c, "\"reg\" property in %s is empty", node->fullpath); - - addr_cells = node_addr_cells(node->parent); - size_cells = node_size_cells(node->parent); - entrylen = (addr_cells + size_cells) * sizeof(cell_t); - - if ((prop->val.len % entrylen) != 0) - FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " - "(#address-cells == %d, #size-cells == %d)", - node->fullpath, prop->val.len, addr_cells, size_cells); -} -NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); - -static void check_ranges_format(struct check *c, struct node *dt, - struct node *node) -{ - struct property *prop; - int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; - - prop = get_property(node, "ranges"); - if (!prop) - return; - - if (!node->parent) { - FAIL(c, "Root node has a \"ranges\" property"); - return; - } - - p_addr_cells = node_addr_cells(node->parent); - p_size_cells = node_size_cells(node->parent); - c_addr_cells = node_addr_cells(node); - c_size_cells = node_size_cells(node); - entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); - - if (prop->val.len == 0) { - if (p_addr_cells != c_addr_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#address-cells (%d) differs from %s (%d)", - node->fullpath, c_addr_cells, node->parent->fullpath, - p_addr_cells); - if (p_size_cells != c_size_cells) - FAIL(c, "%s has empty \"ranges\" property but its " - "#size-cells (%d) differs from %s (%d)", - node->fullpath, c_size_cells, node->parent->fullpath, - p_size_cells); - } else if ((prop->val.len % entrylen) != 0) { - FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " - "(parent #address-cells == %d, child #address-cells == %d, " - "#size-cells == %d)", node->fullpath, prop->val.len, - p_addr_cells, c_addr_cells, c_size_cells); - } -} -NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); - -/* - * Style checks - */ -static void check_avoid_default_addr_size(struct check *c, struct node *dt, - struct node *node) -{ - struct property *reg, *ranges; - - if (!node->parent) - return; /* Ignore root node */ - - reg = get_property(node, "reg"); - ranges = get_property(node, "ranges"); - - if (!reg && !ranges) - return; - - if ((node->parent->addr_cells == -1)) - FAIL(c, "Relying on default #address-cells value for %s", - node->fullpath); - - if ((node->parent->size_cells == -1)) - FAIL(c, "Relying on default #size-cells value for %s", - node->fullpath); -} -NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); - -static void check_obsolete_chosen_interrupt_controller(struct check *c, - struct node *dt) -{ - struct node *chosen; - struct property *prop; - - chosen = get_node_by_path(dt, "/chosen"); - if (!chosen) - return; - - prop = get_property(chosen, "interrupt-controller"); - if (prop) - FAIL(c, "/chosen has obsolete \"interrupt-controller\" " - "property"); -} -TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); - -static struct check *check_table[] = { - &duplicate_node_names, &duplicate_property_names, - &node_name_chars, &node_name_format, &property_name_chars, - &name_is_string, &name_properties, - &explicit_phandles, - &phandle_references, &path_references, - - &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, - &device_type_is_string, &model_is_string, &status_is_string, - - &addr_size_cells, ®_format, &ranges_format, - - &avoid_default_addr_size, - &obsolete_chosen_interrupt_controller, -}; - -void process_checks(int force, struct boot_info *bi) -{ - struct node *dt = bi->dt; - int i; - int error = 0; - - for (i = 0; i < ARRAY_SIZE(check_table); i++) { - struct check *c = check_table[i]; - - if (c->level != IGNORE) - error = error || run_check(c, dt); - } - - if (error) { - if (!force) { - fprintf(stderr, "ERROR: Input tree has errors, aborting " - "(use -f to force output)\n"); - exit(2); - } else if (quiet < 3) { - fprintf(stderr, "Warning: Input tree has errors, " - "output forced\n"); - } - } -} diff --git a/arch/powerpc/boot/dtc-src/data.c b/arch/powerpc/boot/dtc-src/data.c deleted file mode 100644 index dd2e3d39d4c1..000000000000 --- a/arch/powerpc/boot/dtc-src/data.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -void data_free(struct data d) -{ - struct marker *m, *nm; - - m = d.markers; - while (m) { - nm = m->next; - free(m->ref); - free(m); - m = nm; - } - - if (d.val) - free(d.val); -} - -struct data data_grow_for(struct data d, int xlen) -{ - struct data nd; - int newsize; - - if (xlen == 0) - return d; - - nd = d; - - newsize = xlen; - - while ((d.len + xlen) > newsize) - newsize *= 2; - - nd.val = xrealloc(d.val, newsize); - - return nd; -} - -struct data data_copy_mem(const char *mem, int len) -{ - struct data d; - - d = data_grow_for(empty_data, len); - - d.len = len; - memcpy(d.val, mem, len); - - return d; -} - -static char get_oct_char(const char *s, int *i) -{ - char x[4]; - char *endx; - long val; - - x[3] = '\0'; - strncpy(x, s + *i, 3); - - val = strtol(x, &endx, 8); - - assert(endx > x); - - (*i) += endx - x; - return val; -} - -static char get_hex_char(const char *s, int *i) -{ - char x[3]; - char *endx; - long val; - - x[2] = '\0'; - strncpy(x, s + *i, 2); - - val = strtol(x, &endx, 16); - if (!(endx > x)) - die("\\x used with no following hex digits\n"); - - (*i) += endx - x; - return val; -} - -struct data data_copy_escape_string(const char *s, int len) -{ - int i = 0; - struct data d; - char *q; - - d = data_grow_for(empty_data, strlen(s)+1); - - q = d.val; - while (i < len) { - char c = s[i++]; - - if (c != '\\') { - q[d.len++] = c; - continue; - } - - c = s[i++]; - assert(c); - switch (c) { - case 'a': - q[d.len++] = '\a'; - break; - case 'b': - q[d.len++] = '\b'; - break; - case 't': - q[d.len++] = '\t'; - break; - case 'n': - q[d.len++] = '\n'; - break; - case 'v': - q[d.len++] = '\v'; - break; - case 'f': - q[d.len++] = '\f'; - break; - case 'r': - q[d.len++] = '\r'; - break; - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - i--; /* need to re-read the first digit as - * part of the octal value */ - q[d.len++] = get_oct_char(s, &i); - break; - case 'x': - q[d.len++] = get_hex_char(s, &i); - break; - default: - q[d.len++] = c; - } - } - - q[d.len++] = '\0'; - return d; -} - -struct data data_copy_file(FILE *f, size_t maxlen) -{ - struct data d = empty_data; - - while (!feof(f) && (d.len < maxlen)) { - size_t chunksize, ret; - - if (maxlen == -1) - chunksize = 4096; - else - chunksize = maxlen - d.len; - - d = data_grow_for(d, chunksize); - ret = fread(d.val + d.len, 1, chunksize, f); - - if (ferror(f)) - die("Error reading file into data: %s", strerror(errno)); - - if (d.len + ret < d.len) - die("Overflow reading file into data\n"); - - d.len += ret; - } - - return d; -} - -struct data data_append_data(struct data d, const void *p, int len) -{ - d = data_grow_for(d, len); - memcpy(d.val + d.len, p, len); - d.len += len; - return d; -} - -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len) -{ - d = data_grow_for(d, len); - memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); - memcpy(d.val + m->offset, p, len); - d.len += len; - - /* Adjust all markers after the one we're inserting at */ - m = m->next; - for_each_marker(m) - m->offset += len; - return d; -} - -struct data data_append_markers(struct data d, struct marker *m) -{ - struct marker **mp = &d.markers; - - /* Find the end of the markerlist */ - while (*mp) - mp = &((*mp)->next); - *mp = m; - return d; -} - -struct data data_merge(struct data d1, struct data d2) -{ - struct data d; - struct marker *m2 = d2.markers; - - d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); - - /* Adjust for the length of d1 */ - for_each_marker(m2) - m2->offset += d1.len; - - d2.markers = NULL; /* So data_free() doesn't clobber them */ - data_free(d2); - - return d; -} - -struct data data_append_cell(struct data d, cell_t word) -{ - cell_t beword = cpu_to_fdt32(word); - - return data_append_data(d, &beword, sizeof(beword)); -} - -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) -{ - struct fdt_reserve_entry bere; - - bere.address = cpu_to_fdt64(re->address); - bere.size = cpu_to_fdt64(re->size); - - return data_append_data(d, &bere, sizeof(bere)); -} - -struct data data_append_addr(struct data d, uint64_t addr) -{ - uint64_t beaddr = cpu_to_fdt64(addr); - - return data_append_data(d, &beaddr, sizeof(beaddr)); -} - -struct data data_append_byte(struct data d, uint8_t byte) -{ - return data_append_data(d, &byte, 1); -} - -struct data data_append_zeroes(struct data d, int len) -{ - d = data_grow_for(d, len); - - memset(d.val + d.len, 0, len); - d.len += len; - return d; -} - -struct data data_append_align(struct data d, int align) -{ - int newlen = ALIGN(d.len, align); - return data_append_zeroes(d, newlen - d.len); -} - -struct data data_add_marker(struct data d, enum markertype type, char *ref) -{ - struct marker *m; - - m = xmalloc(sizeof(*m)); - m->offset = d.len; - m->type = type; - m->ref = ref; - m->next = NULL; - - return data_append_markers(d, m); -} - -int data_is_one_string(struct data d) -{ - int i; - int len = d.len; - - if (len == 0) - return 0; - - for (i = 0; i < len-1; i++) - if (d.val[i] == '\0') - return 0; - - if (d.val[len-1] != '\0') - return 0; - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/arch/powerpc/boot/dtc-src/dtc-lexer.l deleted file mode 100644 index 44dbfd3f0976..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.l +++ /dev/null @@ -1,320 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%option noyywrap nounput yylineno - -%x INCLUDE -%x BYTESTRING -%x PROPNODENAME -%s V1 - -PROPNODECHAR [a-zA-Z0-9,._+*#?@-] -PATHCHAR ({PROPNODECHAR}|[/]) -LABEL [a-zA-Z_][a-zA-Z0-9_]* -STRING \"([^\\"]|\\.)*\" -WS [[:space:]] -COMMENT "/*"([^*]|\*+[^*/])*\*+"/" -LINECOMMENT "//".*\n - -%{ -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -%} - -%% -<*>"/include/"{WS}*{STRING} { - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - -<*><> { - if (!pop_input_file()) { - yyterminate(); - } - } - -<*>{STRING} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - -<*>"/dts-v1/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - -<*>"/memreserve/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - -<*>{LABEL}: { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - -[bodh]# { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - -[0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - -[0-9]+|0[xX][0-9a-fA-F]+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - -\&{LABEL} { /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -"&{/"{PATHCHAR}+\} { /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - -"&/"{PATHCHAR}+ { /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - -[0-9a-fA-F]{2} { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - -"]" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - -{PROPNODECHAR}+ { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - -"/incbin/" { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - -<*>{WS}+ /* eat whitespace */ -<*>{COMMENT}+ /* eat C-style comments */ -<*>{LINECOMMENT}+ /* eat C++-style comments */ - -<*>. { - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - -%% - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped deleted file mode 100644 index ac392cb040f6..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped +++ /dev/null @@ -1,2187 +0,0 @@ -#line 2 "dtc-lexer.lex.c" - -#line 4 "dtc-lexer.lex.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include -#include -#include -#include - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have . Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart(yyin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int yyleng; - -extern FILE *yyin, *yyout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires - * access to the local variable yy_act. Since yyless() is a macro, it would break - * existing scanners that call yyless() from OUTSIDE yylex. - * One obvious solution it to make yy_act a global. I tried that, and saw - * a 5% performance hit in a non-yylineno scanner, because yy_act is - * normally declared as a register variable-- so it is not worth it. - */ - #define YY_LESS_LINENO(n) \ - do { \ - int yyl;\ - for ( yyl = n; yyl < yyleng; ++yyl )\ - if ( yytext[yyl] == '\n' )\ - --yylineno;\ - }while(0) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void yyrestart (FILE *input_file ); -void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); -void yy_delete_buffer (YY_BUFFER_STATE b ); -void yy_flush_buffer (YY_BUFFER_STATE b ); -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); -void yypop_buffer_state (void ); - -static void yyensure_buffer_stack (void ); -static void yy_load_buffer_state (void ); -static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); - -void *yyalloc (yy_size_t ); -void *yyrealloc (void *,yy_size_t ); -void yyfree (void * ); - -#define yy_new_buffer yy_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define yywrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; - -typedef int yy_state_type; - -extern int yylineno; - -int yylineno = 1; - -extern char *yytext; -#define yytext_ptr yytext - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - yyleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 20 -#define YY_END_OF_BUFFER 21 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[104] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, - 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, - 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, - 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, - 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, - 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, - 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, - 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, - - 0, 4, 0 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, - 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, - 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, - 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, - 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, - - 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, - 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, - 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -static yyconst flex_int32_t yy_meta[36] = - { 0, - 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, - 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, - 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 8, 1 - } ; - -static yyconst flex_int16_t yy_base[117] = - { 0, - 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, - 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, - 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, - 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, - 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, - 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, - 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, - 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, - 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, - 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, - - 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, - 250, 257, 265, 270, 275, 282 - } ; - -static yyconst flex_int16_t yy_def[117] = - { 0, - 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, - 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, - 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, - 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, - 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, - 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, - 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, - - 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_nxt[339] = - { 0, - 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, - 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, - 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, - 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, - 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, - 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, - 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, - 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, - 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, - 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, - - 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, - 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, - 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, - 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, - 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, - 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, - 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, - 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, - 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, - 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, - - 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, - 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, - 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, - 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, - 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, - 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, - 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, - 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, - 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, - 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, - - 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -static yyconst flex_int16_t yy_chk[339] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, - 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, - 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, - 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, - 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, - 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, - 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, - 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, - 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, - 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, - 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, - 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, - 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, - - 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, - 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, - 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, - 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, - 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, - 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, - 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, - 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, - 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, - 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, - - 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, - 103, 103, 103, 103, 103, 103, 103, 103 - } ; - -/* Table of booleans, true if rule could match eol. */ -static yyconst flex_int32_t yy_rule_can_match_eol[21] = - { 0, -1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, - 0, }; - -static yy_state_type yy_last_accepting_state; -static char *yy_last_accepting_cpos; - -extern int yy_flex_debug; -int yy_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *yytext; -#line 1 "dtc-lexer.l" -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - - - - -#line 37 "dtc-lexer.l" -#include "dtc.h" -#include "srcpos.h" -#include "dtc-parser.tab.h" - - -/*#define LEXDEBUG 1*/ - -#ifdef LEXDEBUG -#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) -#else -#define DPRINT(fmt, ...) do { } while (0) -#endif - -static int dts_version; /* = 0 */ - -#define BEGIN_DEFAULT() if (dts_version == 0) { \ - DPRINT("\n"); \ - BEGIN(INITIAL); \ - } else { \ - DPRINT("\n"); \ - BEGIN(V1); \ - } - -static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" - -#define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap (void ); -#else -extern int yywrap (void ); -#endif -#endif - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ - { \ - int c = '*'; \ - int n; \ - for ( n = 0; n < max_size && \ - (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ - buf[n] = (char) c; \ - if ( c == '\n' ) \ - buf[n++] = (char) c; \ - if ( c == EOF && ferror( yyin ) ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - result = n; \ - } \ - else \ - { \ - errno=0; \ - while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(yyin); \ - } \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int yylex (void); - -#define YY_DECL int yylex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - -#line 64 "dtc-lexer.l" - -#line 795 "dtc-lexer.lex.c" - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! yyin ) - yyin = stdin; - - if ( ! yyout ) - yyout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - do - { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - ++yy_cp; - } - while ( yy_base[yy_current_state] != 303 ); - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - if ( yy_act == 0 ) - { /* have to back up */ - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - yy_act = yy_accept[yy_current_state]; - } - - YY_DO_BEFORE_ACTION; - - if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) - { - int yyl; - for ( yyl = 0; yyl < yyleng; ++yyl ) - if ( yytext[yyl] == '\n' ) - - yylineno++; -; - } - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ - case 0: /* must back up */ - /* undo the effects of YY_DO_BEFORE_ACTION */ - *yy_cp = (yy_hold_char); - yy_cp = (yy_last_accepting_cpos); - yy_current_state = (yy_last_accepting_state); - goto yy_find_action; - -case 1: -/* rule 1 can match eol */ -YY_RULE_SETUP -#line 65 "dtc-lexer.l" -{ - char *name = strchr(yytext, '\"') + 1; - yytext[yyleng-1] = '\0'; - push_input_file(name); - } - YY_BREAK -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): -case YY_STATE_EOF(BYTESTRING): -case YY_STATE_EOF(PROPNODENAME): -case YY_STATE_EOF(V1): -#line 71 "dtc-lexer.l" -{ - if (!pop_input_file()) { - yyterminate(); - } - } - YY_BREAK -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -#line 77 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("String: %s\n", yytext); - yylval.data = data_copy_escape_string(yytext+1, - yyleng-2); - yylloc.first_line = yylineno; - return DT_STRING; - } - YY_BREAK -case 3: -YY_RULE_SETUP -#line 87 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /dts-v1/\n"); - dts_version = 1; - BEGIN_DEFAULT(); - return DT_V1; - } - YY_BREAK -case 4: -YY_RULE_SETUP -#line 96 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Keyword: /memreserve/\n"); - BEGIN_DEFAULT(); - return DT_MEMRESERVE; - } - YY_BREAK -case 5: -YY_RULE_SETUP -#line 104 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Label: %s\n", yytext); - yylval.labelref = strdup(yytext); - yylval.labelref[yyleng-1] = '\0'; - return DT_LABEL; - } - YY_BREAK -case 6: -YY_RULE_SETUP -#line 113 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - if (*yytext == 'b') - yylval.cbase = 2; - else if (*yytext == 'o') - yylval.cbase = 8; - else if (*yytext == 'd') - yylval.cbase = 10; - else - yylval.cbase = 16; - DPRINT("Base: %d\n", yylval.cbase); - return DT_BASE; - } - YY_BREAK -case 7: -YY_RULE_SETUP -#line 128 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LEGACYLITERAL; - } - YY_BREAK -case 8: -YY_RULE_SETUP -#line 136 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.literal = strdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); - return DT_LITERAL; - } - YY_BREAK -case 9: -YY_RULE_SETUP -#line 144 "dtc-lexer.l" -{ /* label reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 10: -YY_RULE_SETUP -#line 152 "dtc-lexer.l" -{ /* new-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yytext[yyleng-1] = '\0'; - DPRINT("Ref: %s\n", yytext+2); - yylval.labelref = strdup(yytext+2); - return DT_REF; - } - YY_BREAK -case 11: -YY_RULE_SETUP -#line 161 "dtc-lexer.l" -{ /* old-style path reference */ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Ref: %s\n", yytext+1); - yylval.labelref = strdup(yytext+1); - return DT_REF; - } - YY_BREAK -case 12: -YY_RULE_SETUP -#line 169 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - yylval.byte = strtol(yytext, NULL, 16); - DPRINT("Byte: %02x\n", (int)yylval.byte); - return DT_BYTE; - } - YY_BREAK -case 13: -YY_RULE_SETUP -#line 177 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("/BYTESTRING\n"); - BEGIN_DEFAULT(); - return ']'; - } - YY_BREAK -case 14: -YY_RULE_SETUP -#line 185 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("PropNodeName: %s\n", yytext); - yylval.propnodename = strdup(yytext); - BEGIN_DEFAULT(); - return DT_PROPNODENAME; - } - YY_BREAK -case 15: -YY_RULE_SETUP -#line 194 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Binary Include\n"); - return DT_INCBIN; - } - YY_BREAK -case 16: -/* rule 16 can match eol */ -YY_RULE_SETUP -#line 201 "dtc-lexer.l" -/* eat whitespace */ - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -#line 202 "dtc-lexer.l" -/* eat C-style comments */ - YY_BREAK -case 18: -/* rule 18 can match eol */ -YY_RULE_SETUP -#line 203 "dtc-lexer.l" -/* eat C++-style comments */ - YY_BREAK -case 19: -YY_RULE_SETUP -#line 205 "dtc-lexer.l" -{ - yylloc.file = srcpos_file; - yylloc.first_line = yylineno; - DPRINT("Char: %c (\\x%02x)\n", yytext[0], - (unsigned)yytext[0]); - if (yytext[0] == '[') { - DPRINT("\n"); - BEGIN(BYTESTRING); - } - if ((yytext[0] == '{') - || (yytext[0] == ';')) { - DPRINT("\n"); - BEGIN(PROPNODENAME); - } - return yytext[0]; - } - YY_BREAK -case 20: -YY_RULE_SETUP -#line 222 "dtc-lexer.l" -ECHO; - YY_BREAK -#line 1120 "dtc-lexer.lex.c" - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of yylex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart(yyin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - register char *yy_cp = (yy_c_buf_p); - - register YY_CHAR yy_c = 1; - if ( yy_accept[yy_current_state] ) - { - (yy_last_accepting_state) = yy_current_state; - (yy_last_accepting_cpos) = yy_cp; - } - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 104 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 103); - - return yy_is_jam ? 0 : yy_current_state; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart(yyin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve yytext */ - (yy_hold_char) = *++(yy_c_buf_p); - - if ( c == '\n' ) - - yylineno++; -; - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void yyrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_init_buffer(YY_CURRENT_BUFFER,input_file ); - yy_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void yy_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * - */ - void yy_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree((void *) b->yy_ch_buf ); - - yyfree((void *) b ); -} - -#ifndef __cplusplus -extern int isatty (int ); -#endif /* __cplusplus */ - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ - static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - yy_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void yy_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void yypop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void yyensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) -{ - - return yy_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) yyalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = (yy_hold_char); \ - (yy_c_buf_p) = yytext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int yyget_lineno (void) -{ - - return yylineno; -} - -/** Get the input stream. - * - */ -FILE *yyget_in (void) -{ - return yyin; -} - -/** Get the output stream. - * - */ -FILE *yyget_out (void) -{ - return yyout; -} - -/** Get the length of the current token. - * - */ -int yyget_leng (void) -{ - return yyleng; -} - -/** Get the current token. - * - */ - -char *yyget_text (void) -{ - return yytext; -} - -/** Set the current line number. - * @param line_number - * - */ -void yyset_lineno (int line_number ) -{ - - yylineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see yy_switch_to_buffer - */ -void yyset_in (FILE * in_str ) -{ - yyin = in_str ; -} - -void yyset_out (FILE * out_str ) -{ - yyout = out_str ; -} - -int yyget_debug (void) -{ - return yy_flex_debug; -} - -void yyset_debug (int bdebug ) -{ - yy_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - - /* We do not touch yylineno unless the option is enabled. */ - yylineno = 1; - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = (FILE *) 0; - yyout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} - -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(); - } - - /* Destroy the stack itself. */ - yyfree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *yyalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *yyrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void yyfree (void * ptr ) -{ - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -#line 222 "dtc-lexer.l" - - - - -/* - * Stack of nested include file contexts. - */ - -struct incl_file { - struct dtc_file *file; - YY_BUFFER_STATE yy_prev_buf; - int yy_prev_lineno; - struct incl_file *prev; -}; - -static struct incl_file *incl_file_stack; - - -/* - * Detect infinite include recursion. - */ -#define MAX_INCLUDE_DEPTH (100) - -static int incl_depth = 0; - - -static void push_input_file(const char *filename) -{ - struct incl_file *incl_file; - struct dtc_file *newfile; - struct search_path search, *searchptr = NULL; - - assert(filename); - - if (incl_depth++ >= MAX_INCLUDE_DEPTH) - die("Includes nested too deeply"); - - if (srcpos_file) { - search.dir = srcpos_file->dir; - search.next = NULL; - search.prev = NULL; - searchptr = &search; - } - - newfile = dtc_open_file(filename, searchptr); - - incl_file = xmalloc(sizeof(struct incl_file)); - - /* - * Save current context. - */ - incl_file->yy_prev_buf = YY_CURRENT_BUFFER; - incl_file->yy_prev_lineno = yylineno; - incl_file->file = srcpos_file; - incl_file->prev = incl_file_stack; - - incl_file_stack = incl_file; - - /* - * Establish new context. - */ - srcpos_file = newfile; - yylineno = 1; - yyin = newfile->file; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); -} - - -static int pop_input_file(void) -{ - struct incl_file *incl_file; - - if (incl_file_stack == 0) - return 0; - - dtc_close_file(srcpos_file); - - /* - * Pop. - */ - --incl_depth; - incl_file = incl_file_stack; - incl_file_stack = incl_file->prev; - - /* - * Recover old context. - */ - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(incl_file->yy_prev_buf); - yylineno = incl_file->yy_prev_lineno; - srcpos_file = incl_file->file; - yyin = incl_file->file ? incl_file->file->file : NULL; - - /* - * Free old state. - */ - free(incl_file); - - return 1; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped deleted file mode 100644 index 27129377e5d2..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped +++ /dev/null @@ -1,2040 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton implementation for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* C LALR(1) parser skeleton written by Richard Stallman, by - simplifying the original so-called "semantic" parser. */ - -/* All symbols defined below should begin with yy or YY, to avoid - infringing on user name space. This should be done even for local - variables, as they might otherwise be expanded by user macros. - There are some unavoidable exceptions within include files to - define necessary library symbols; they are noted "INFRINGES ON - USER NAME SPACE" below. */ - -/* Identify Bison output. */ -#define YYBISON 1 - -/* Bison version. */ -#define YYBISON_VERSION "2.3" - -/* Skeleton name. */ -#define YYSKELETON_NAME "yacc.c" - -/* Pure parsers. */ -#define YYPURE 0 - -/* Using locations. */ -#define YYLSP_NEEDED 1 - - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -/* Copy the first part of user declarations. */ -#line 23 "dtc-parser.y" - -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 0 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 187 of yacc.c. */ -#line 153 "dtc-parser.tab.c" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - - -/* Copy the second part of user declarations. */ - - -/* Line 216 of yacc.c. */ -#line 178 "dtc-parser.tab.c" - -#ifdef short -# undef short -#endif - -#ifdef YYTYPE_UINT8 -typedef YYTYPE_UINT8 yytype_uint8; -#else -typedef unsigned char yytype_uint8; -#endif - -#ifdef YYTYPE_INT8 -typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; -#else -typedef short int yytype_int8; -#endif - -#ifdef YYTYPE_UINT16 -typedef YYTYPE_UINT16 yytype_uint16; -#else -typedef unsigned short int yytype_uint16; -#endif - -#ifdef YYTYPE_INT16 -typedef YYTYPE_INT16 yytype_int16; -#else -typedef short int yytype_int16; -#endif - -#ifndef YYSIZE_T -# ifdef __SIZE_TYPE__ -# define YYSIZE_T __SIZE_TYPE__ -# elif defined size_t -# define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# define YYSIZE_T size_t -# else -# define YYSIZE_T unsigned int -# endif -#endif - -#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) - -#ifndef YY_ -# if YYENABLE_NLS -# if ENABLE_NLS -# include /* INFRINGES ON USER NAME SPACE */ -# define YY_(msgid) dgettext ("bison-runtime", msgid) -# endif -# endif -# ifndef YY_ -# define YY_(msgid) msgid -# endif -#endif - -/* Suppress unused-variable warnings by "using" E. */ -#if ! defined lint || defined __GNUC__ -# define YYUSE(e) ((void) (e)) -#else -# define YYUSE(e) /* empty */ -#endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(n) (n) -#else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int i) -#else -static int -YYID (i) - int i; -#endif -{ - return i; -} -#endif - -#if ! defined yyoverflow || YYERROR_VERBOSE - -/* The parser invokes alloca or malloc; define the necessary symbols. */ - -# ifdef YYSTACK_USE_ALLOCA -# if YYSTACK_USE_ALLOCA -# ifdef __GNUC__ -# define YYSTACK_ALLOC __builtin_alloca -# elif defined __BUILTIN_VA_ARG_INCR -# include /* INFRINGES ON USER NAME SPACE */ -# elif defined _AIX -# define YYSTACK_ALLOC __alloca -# elif defined _MSC_VER -# include /* INFRINGES ON USER NAME SPACE */ -# define alloca _alloca -# else -# define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# endif -# endif -# endif - -# ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) -# ifndef YYSTACK_ALLOC_MAXIMUM - /* The OS might guarantee only one guard page at the bottom of the stack, - and a page size can be as small as 4096 bytes. So we cannot safely - invoke alloca (N) if N exceeds 4096. Use a slightly smaller number - to allow for a few compiler-allocated temporary stack slots. */ -# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ -# endif -# else -# define YYSTACK_ALLOC YYMALLOC -# define YYSTACK_FREE YYFREE -# ifndef YYSTACK_ALLOC_MAXIMUM -# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM -# endif -# if (defined __cplusplus && ! defined _STDLIB_H \ - && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) -# include /* INFRINGES ON USER NAME SPACE */ -# ifndef _STDLIB_H -# define _STDLIB_H 1 -# endif -# endif -# ifndef YYMALLOC -# define YYMALLOC malloc -# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# ifndef YYFREE -# define YYFREE free -# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void free (void *); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# endif -#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ - - -#if (! defined yyoverflow \ - && (! defined __cplusplus \ - || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ - && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) - -/* A type that is properly aligned for any stack member. */ -union yyalloc -{ - yytype_int16 yyss; - YYSTYPE yyvs; - YYLTYPE yyls; -}; - -/* The size of the maximum gap between one aligned stack and the next. */ -# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) - -/* The size of an array large to enough to hold all stacks, each with - N elements. */ -# define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ - + 2 * YYSTACK_GAP_MAXIMUM) - -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif - -/* Relocate STACK from its old location to the new one. The - local variables YYSIZE and YYSTACKSIZE give the old and new number of - elements in the stack, and YYPTR gives the new location of the - stack. Advance YYPTR to a properly aligned location for the next - stack. */ -# define YYSTACK_RELOCATE(Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) - -#endif - -/* YYFINAL -- State number of the termination state. */ -#define YYFINAL 9 -/* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 73 - -/* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 27 -/* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 20 -/* YYNRULES -- Number of rules. */ -#define YYNRULES 45 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 76 - -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ -#define YYUNDEFTOK 2 -#define YYMAXUTOK 268 - -#define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) - -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ -static const yytype_uint8 yytranslate[] = -{ - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, - 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13 -}; - -#if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint8 yyprhs[] = -{ - 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, - 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, - 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, - 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, - 128, 129, 132, 135, 139, 140 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, - -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, - -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, - 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, - -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, - -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, - -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, - 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, - 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, - 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, - 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, - 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, - -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, - 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, - 11, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ -static const yytype_uint16 yyrline[] = -{ - 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, - 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, - 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, - 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, - 308, 311, 315, 323, 331, 334 -}; -#endif - -#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE -/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ -static const char *const yytname[] = -{ - "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", - "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", - "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", - "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", - "')'", "$accept", "sourcefile", "memreserves", "memreserve", - "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", - "proplist", "propdef", "propdata", "propdataprefix", "celllist", - "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 -}; -#endif - -# ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ -static const yytype_uint16 yytoknum[] = -{ - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, - 60, 62, 91, 93, 40, 44, 41 -}; -# endif - -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, - 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, - 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, - 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, - 44, 44, 44, 45, 46, 46 -}; - -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = -{ - 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, - 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, - 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, - 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, - 0, 2, 2, 3, 0, 1 -}; - -/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state - STATE-NUM when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ -static const yytype_uint8 yydefact[] = -{ - 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, - 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, - 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, - 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, - 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, - 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, - 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, - 24, 36, 0, 0, 0, 23 -}; - -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int8 yydefgoto[] = -{ - -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, - 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 -}; - -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -14 -static const yytype_int8 yypact[] = -{ - 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, - 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, - -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, - 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, - -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, - -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, - -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, - -14, -14, 33, 40, 36, -14 -}; - -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int8 yypgoto[] = -{ - -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, - 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 -}; - -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If zero, do what YYDEFACT says. - If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -45 -static const yytype_int8 yytable[] = -{ - 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, - 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, - 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, - 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, - 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, - 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, - 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, - 0, 0, 43, 37 -}; - -static const yytype_int8 yycheck[] = -{ - 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, - 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, - 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, - 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, - 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, - 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, - 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, - -1, -1, 38, 31 -}; - -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = -{ - 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, - 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, - 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, - 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, - 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, - 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, - 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, - 26, 7, 33, 25, 33, 26 -}; - -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. */ - -#define YYFAIL goto yyerrlab - -#define YYRECOVERING() (!!yyerrstatus) - -#define YYBACKUP(Token, Value) \ -do \ - if (yychar == YYEMPTY && yylen == 1) \ - { \ - yychar = (Token); \ - yylval = (Value); \ - yytoken = YYTRANSLATE (yychar); \ - YYPOPSTACK (1); \ - goto yybackup; \ - } \ - else \ - { \ - yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) - - -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. - If N is 0, then set CURRENT to the empty location which ends - the previous symbol: RHS[0] (always defined). */ - -#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -#ifndef YYLLOC_DEFAULT -# define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - } \ - while (YYID (0)) -#endif - - -/* YY_LOCATION_PRINT -- Print the location on the stream. - This macro was not mandated originally: define only if we know - we won't break user code: when these are the locations we know. */ - -#ifndef YY_LOCATION_PRINT -# if YYLTYPE_IS_TRIVIAL -# define YY_LOCATION_PRINT(File, Loc) \ - fprintf (File, "%d.%d-%d.%d", \ - (Loc).first_line, (Loc).first_column, \ - (Loc).last_line, (Loc).last_column) -# else -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -# endif -#endif - - -/* YYLEX -- calling `yylex' with the right arguments. */ - -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif - -/* Enable debugging if requested. */ -#if YYDEBUG - -# ifndef YYFPRINTF -# include /* INFRINGES ON USER NAME SPACE */ -# define YYFPRINTF fprintf -# endif - -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) - -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value, Location); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (!yyvaluep) - return; - YYUSE (yylocationp); -# ifdef YYPRINT - if (yytype < YYNTOKENS) - YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); -# endif - switch (yytype) - { - default: - break; - } -} - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; - YYLTYPE const * const yylocationp; -#endif -{ - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); - - YY_LOCATION_PRINT (yyoutput, *yylocationp); - YYFPRINTF (yyoutput, ": "); - yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); - YYFPRINTF (yyoutput, ")"); -} - -/*------------------------------------------------------------------. -| yy_stack_print -- Print the state stack from its BOTTOM up to its | -| TOP (included). | -`------------------------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) -#else -static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; -#endif -{ - YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); - YYFPRINTF (stderr, "\n"); -} - -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) - - -/*------------------------------------------------. -| Report that the YYRULE is going to be reduced. | -`------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) -#else -static void -yy_reduce_print (yyvsp, yylsp, yyrule) - YYSTYPE *yyvsp; - YYLTYPE *yylsp; - int yyrule; -#endif -{ - int yynrhs = yyr2[yyrule]; - int yyi; - unsigned long int yylno = yyrline[yyrule]; - YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); - /* The symbols being reduced. */ - for (yyi = 0; yyi < yynrhs; yyi++) - { - fprintf (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - , &(yylsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); - } -} - -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, yylsp, Rule); \ -} while (YYID (0)) - -/* Nonzero means print parse trace. It is left uninitialized so that - multiple parsers can coexist. */ -int yydebug; -#else /* !YYDEBUG */ -# define YYDPRINTF(Args) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) -# define YY_STACK_PRINT(Bottom, Top) -# define YY_REDUCE_PRINT(Rule) -#endif /* !YYDEBUG */ - - -/* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH -# define YYINITDEPTH 200 -#endif - -/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only - if the built-in stack extension method is used). - - Do not make this value too large; the results are undefined if - YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) - evaluated with infinite-precision integer arithmetic. */ - -#ifndef YYMAXDEPTH -# define YYMAXDEPTH 10000 -#endif - - - -#if YYERROR_VERBOSE - -# ifndef yystrlen -# if defined __GLIBC__ && defined _STRING_H -# define yystrlen strlen -# else -/* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static YYSIZE_T -yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif -{ - YYSIZE_T yylen; - for (yylen = 0; yystr[yylen]; yylen++) - continue; - return yylen; -} -# endif -# endif - -# ifndef yystpcpy -# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE -# define yystpcpy stpcpy -# else -/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in - YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static char * -yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif -{ - char *yyd = yydest; - const char *yys = yysrc; - - while ((*yyd++ = *yys++) != '\0') - continue; - - return yyd - 1; -} -# endif -# endif - -# ifndef yytnamerr -/* Copy to YYRES the contents of YYSTR after stripping away unnecessary - quotes and backslashes, so that it's suitable for yyerror. The - heuristic is that double-quoting is unnecessary unless the string - contains an apostrophe, a comma, or backslash (other than - backslash-backslash). YYSTR is taken from yytname. If YYRES is - null, do not copy; instead, return the length of what the result - would have been. */ -static YYSIZE_T -yytnamerr (char *yyres, const char *yystr) -{ - if (*yystr == '"') - { - YYSIZE_T yyn = 0; - char const *yyp = yystr; - - for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } - do_not_strip_quotes: ; - } - - if (! yyres) - return yystrlen (yystr); - - return yystpcpy (yyres, yystr) - yyres; -} -# endif - -/* Copy into YYRESULT an error message about the unexpected token - YYCHAR while in state YYSTATE. Return the number of bytes copied, - including the terminating null byte. If YYRESULT is null, do not - copy anything; just return the number of bytes that would be - copied. As a special case, return 0 if an ordinary "syntax error" - message will do. Return YYSIZE_MAXIMUM if overflow occurs during - size calculation. */ -static YYSIZE_T -yysyntax_error (char *yyresult, int yystate, int yychar) -{ - int yyn = yypact[yystate]; - - if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) - return 0; - else - { - int yytype = YYTRANSLATE (yychar); - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - int yysize_overflow = 0; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - int yyx; - -# if 0 - /* This is so xgettext sees the translatable formats that are - constructed on the fly. */ - YY_("syntax error, unexpected %s"); - YY_("syntax error, unexpected %s, expecting %s"); - YY_("syntax error, unexpected %s, expecting %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s"); - YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); -# endif - char *yyfmt; - char const *yyf; - static char const yyunexpected[] = "syntax error, unexpected %s"; - static char const yyexpecting[] = ", expecting %s"; - static char const yyor[] = " or %s"; - char yyformat[sizeof yyunexpected - + sizeof yyexpecting - 1 - + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) - * (sizeof yyor - 1))]; - char const *yyprefix = yyexpecting; - - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yycount = 1; - - yyarg[0] = yytname[yytype]; - yyfmt = yystpcpy (yyformat, yyunexpected); - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - yyformat[sizeof yyunexpected - 1] = '\0'; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - yyfmt = yystpcpy (yyfmt, yyprefix); - yyprefix = yyor; - } - - yyf = YY_(yyformat); - yysize1 = yysize + yystrlen (yyf); - yysize_overflow |= (yysize1 < yysize); - yysize = yysize1; - - if (yysize_overflow) - return YYSIZE_MAXIMUM; - - if (yyresult) - { - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - char *yyp = yyresult; - int yyi = 0; - while ((*yyp = *yyf) != '\0') - { - if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyf += 2; - } - else - { - yyp++; - yyf++; - } - } - } - return yysize; - } -} -#endif /* YYERROR_VERBOSE */ - - -/*-----------------------------------------------. -| Release the memory associated to this symbol. | -`-----------------------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) -#else -static void -yydestruct (yymsg, yytype, yyvaluep, yylocationp) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; - YYLTYPE *yylocationp; -#endif -{ - YYUSE (yyvaluep); - YYUSE (yylocationp); - - if (!yymsg) - yymsg = "Deleting"; - YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); - - switch (yytype) - { - - default: - break; - } -} - - -/* Prevent warnings from -Wmissing-prototypes. */ - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); -#endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus -int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ - - - -/* The look-ahead symbol. */ -int yychar; - -/* The semantic value of the look-ahead symbol. */ -YYSTYPE yylval; - -/* Number of syntax errors so far. */ -int yynerrs; -/* Location data for the look-ahead symbol. */ -YYLTYPE yylloc; - - - -/*----------. -| yyparse. | -`----------*/ - -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void) -#else -int -yyparse () - -#endif -#endif -{ - - int yystate; - int yyn; - int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; - - /* The location stack. */ - YYLTYPE yylsa[YYINITDEPTH]; - YYLTYPE *yyls = yylsa; - YYLTYPE *yylsp; - /* The locations where the error started and ended. */ - YYLTYPE yyerror_range[2]; - -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) - - YYSIZE_T yystacksize = YYINITDEPTH; - - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - YYLTYPE yyloc; - - /* The number of symbols on the RHS of the reduced rule. - Keep to zero when no symbol should be popped. */ - int yylen = 0; - - YYDPRINTF ((stderr, "Starting parse\n")); - - yystate = 0; - yyerrstatus = 0; - yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ - - /* Initialize stack pointers. - Waste one element of value and location stack - so that they stay on the same level as the state stack. - The wasted elements are never initialized. */ - - yyssp = yyss; - yyvsp = yyvs; - yylsp = yyls; -#if YYLTYPE_IS_TRIVIAL - /* Initialize the default location before parsing starts. */ - yylloc.first_line = yylloc.last_line = 1; - yylloc.first_column = yylloc.last_column = 0; -#endif - - goto yysetstate; - -/*------------------------------------------------------------. -| yynewstate -- Push a new state, which is found in yystate. | -`------------------------------------------------------------*/ - yynewstate: - /* In all cases, when you get here, the value and location stacks - have just been pushed. So pushing a state here evens the stacks. */ - yyssp++; - - yysetstate: - *yyssp = yystate; - - if (yyss + yystacksize - 1 <= yyssp) - { - /* Get the current used size of the three stacks, in elements. */ - YYSIZE_T yysize = yyssp - yyss + 1; - -#ifdef yyoverflow - { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - YYLTYPE *yyls1 = yyls; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yyls1, yysize * sizeof (*yylsp), - &yystacksize); - yyls = yyls1; - yyss = yyss1; - yyvs = yyvs1; - } -#else /* no yyoverflow */ -# ifndef YYSTACK_RELOCATE - goto yyexhaustedlab; -# else - /* Extend the stack our own way. */ - if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; - yystacksize *= 2; - if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; - - { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - YYSTACK_RELOCATE (yyls); -# undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); - } -# endif -#endif /* no yyoverflow */ - - yyssp = yyss + yysize - 1; - yyvsp = yyvs + yysize - 1; - yylsp = yyls + yysize - 1; - - YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); - - if (yyss + yystacksize - 1 <= yyssp) - YYABORT; - } - - YYDPRINTF ((stderr, "Entering state %d\n", yystate)); - - goto yybackup; - -/*-----------. -| yybackup. | -`-----------*/ -yybackup: - - /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ - - /* First try to decide what to do without reference to look-ahead token. */ - yyn = yypact[yystate]; - if (yyn == YYPACT_NINF) - goto yydefault; - - /* Not known => get a look-ahead token if don't already have one. */ - - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ - if (yychar == YYEMPTY) - { - YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; - } - - if (yychar <= YYEOF) - { - yychar = yytoken = YYEOF; - YYDPRINTF ((stderr, "Now at end of input.\n")); - } - else - { - yytoken = YYTRANSLATE (yychar); - YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); - } - - /* If the proper action on seeing token YYTOKEN is to reduce or to - detect an error, take that action. */ - yyn += yytoken; - if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) - goto yydefault; - yyn = yytable[yyn]; - if (yyn <= 0) - { - if (yyn == 0 || yyn == YYTABLE_NINF) - goto yyerrlab; - yyn = -yyn; - goto yyreduce; - } - - if (yyn == YYFINAL) - YYACCEPT; - - /* Count tokens shifted since error; after three, turn off error - status. */ - if (yyerrstatus) - yyerrstatus--; - - /* Shift the look-ahead token. */ - YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; - - yystate = yyn; - *++yyvsp = yylval; - *++yylsp = yylloc; - goto yynewstate; - - -/*-----------------------------------------------------------. -| yydefault -- do the default action for the current state. | -`-----------------------------------------------------------*/ -yydefault: - yyn = yydefact[yystate]; - if (yyn == 0) - goto yyerrlab; - goto yyreduce; - - -/*-----------------------------. -| yyreduce -- Do a reduction. | -`-----------------------------*/ -yyreduce: - /* yyn is the number of a rule to reduce with. */ - yylen = yyr2[yyn]; - - /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. - - Otherwise, the following line sets YYVAL to garbage. - This behavior is undocumented and Bison - users should not rely upon it. Assigning to YYVAL - unconditionally makes the parser a bit smaller, and it avoids a - GCC warning that YYVAL may be used uninitialized. */ - yyval = yyvsp[1-yylen]; - - /* Default location. */ - YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); - YY_REDUCE_PRINT (yyn); - switch (yyn) - { - case 2: -#line 90 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); - ;} - break; - - case 3: -#line 94 "dtc-parser.y" - { - the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); - ;} - break; - - case 4: -#line 101 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 5: -#line 105 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 6: -#line 112 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 7: -#line 119 "dtc-parser.y" - { - (yyval.re) = NULL; - ;} - break; - - case 8: -#line 123 "dtc-parser.y" - { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); - ;} - break; - - case 9: -#line 130 "dtc-parser.y" - { - (yyval.re) = (yyvsp[(1) - (1)].re); - ;} - break; - - case 10: -#line 134 "dtc-parser.y" - { - (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); - ;} - break; - - case 11: -#line 141 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - ;} - break; - - case 12: -#line 145 "dtc-parser.y" - { - (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); - ;} - break; - - case 13: -#line 152 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); - ;} - break; - - case 14: -#line 159 "dtc-parser.y" - { - (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); - ;} - break; - - case 15: -#line 166 "dtc-parser.y" - { - (yyval.proplist) = NULL; - ;} - break; - - case 16: -#line 170 "dtc-parser.y" - { - (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); - ;} - break; - - case 17: -#line 177 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); - ;} - break; - - case 18: -#line 181 "dtc-parser.y" - { - (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 19: -#line 188 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); - ;} - break; - - case 20: -#line 192 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 21: -#line 196 "dtc-parser.y" - { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); - ;} - break; - - case 22: -#line 200 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 23: -#line 204 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); - struct data d = empty_data; - - if ((yyvsp[(6) - (9)].addr) != 0) - if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)(yyvsp[(6) - (9)].addr), - (yyvsp[(4) - (9)].data).val, strerror(errno)); - - d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); - - (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); - dtc_close_file(file); - ;} - break; - - case 24: -#line 221 "dtc-parser.y" - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); - dtc_close_file(file); - ;} - break; - - case 25: -#line 232 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 26: -#line 239 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 27: -#line 243 "dtc-parser.y" - { - (yyval.data) = (yyvsp[(1) - (2)].data); - ;} - break; - - case 28: -#line 247 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 29: -#line 254 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 30: -#line 258 "dtc-parser.y" - { - (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); - ;} - break; - - case 31: -#line 262 "dtc-parser.y" - { - (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, - (yyvsp[(2) - (2)].labelref)), -1); - ;} - break; - - case 32: -#line 267 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 33: -#line 274 "dtc-parser.y" - { - (yyval.cbase) = 16; - ;} - break; - - case 35: -#line 282 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); - ;} - break; - - case 36: -#line 286 "dtc-parser.y" - { - (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); - ;} - break; - - case 37: -#line 293 "dtc-parser.y" - { - (yyval.data) = empty_data; - ;} - break; - - case 38: -#line 297 "dtc-parser.y" - { - (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); - ;} - break; - - case 39: -#line 301 "dtc-parser.y" - { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); - ;} - break; - - case 40: -#line 308 "dtc-parser.y" - { - (yyval.nodelist) = NULL; - ;} - break; - - case 41: -#line 312 "dtc-parser.y" - { - (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); - ;} - break; - - case 42: -#line 316 "dtc-parser.y" - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - ;} - break; - - case 43: -#line 324 "dtc-parser.y" - { - (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); - ;} - break; - - case 44: -#line 331 "dtc-parser.y" - { - (yyval.labelref) = NULL; - ;} - break; - - case 45: -#line 335 "dtc-parser.y" - { - (yyval.labelref) = (yyvsp[(1) - (1)].labelref); - ;} - break; - - -/* Line 1267 of yacc.c. */ -#line 1780 "dtc-parser.tab.c" - default: break; - } - YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); - - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - - *++yyvsp = yyval; - *++yylsp = yyloc; - - /* Now `shift' the result of the reduction. Determine what state - that goes to, based on the state we popped back to and the rule - number reduced by. */ - - yyn = yyr1[yyn]; - - yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; - if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) - yystate = yytable[yystate]; - else - yystate = yydefgoto[yyn - YYNTOKENS]; - - goto yynewstate; - - -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ -yyerrlab: - /* If not already recovering from an error, report this error. */ - if (!yyerrstatus) - { - ++yynerrs; -#if ! YYERROR_VERBOSE - yyerror (YY_("syntax error")); -#else - { - YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); - if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) - { - YYSIZE_T yyalloc = 2 * yysize; - if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) - yyalloc = YYSTACK_ALLOC_MAXIMUM; - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yyalloc); - if (yymsg) - yymsg_alloc = yyalloc; - else - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - } - } - - if (0 < yysize && yysize <= yymsg_alloc) - { - (void) yysyntax_error (yymsg, yystate, yychar); - yyerror (yymsg); - } - else - { - yyerror (YY_("syntax error")); - if (yysize != 0) - goto yyexhaustedlab; - } - } -#endif - } - - yyerror_range[0] = yylloc; - - if (yyerrstatus == 3) - { - /* If just tried and failed to reuse look-ahead token after an - error, discard it. */ - - if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } - else - { - yydestruct ("Error: discarding", - yytoken, &yylval, &yylloc); - yychar = YYEMPTY; - } - } - - /* Else will try to reuse look-ahead token after shifting the error - token. */ - goto yyerrlab1; - - -/*---------------------------------------------------. -| yyerrorlab -- error raised explicitly by YYERROR. | -`---------------------------------------------------*/ -yyerrorlab: - - /* Pacify compilers like GCC when the user code never invokes - YYERROR and the label yyerrorlab therefore never appears in user - code. */ - if (/*CONSTCOND*/ 0) - goto yyerrorlab; - - yyerror_range[0] = yylsp[1-yylen]; - /* Do not reclaim the symbols of the rule which action triggered - this YYERROR. */ - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - yystate = *yyssp; - goto yyerrlab1; - - -/*-------------------------------------------------------------. -| yyerrlab1 -- common code for both syntax error and YYERROR. | -`-------------------------------------------------------------*/ -yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ - - for (;;) - { - yyn = yypact[yystate]; - if (yyn != YYPACT_NINF) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } - - /* Pop the current state because it cannot handle the error token. */ - if (yyssp == yyss) - YYABORT; - - yyerror_range[0] = *yylsp; - yydestruct ("Error: popping", - yystos[yystate], yyvsp, yylsp); - YYPOPSTACK (1); - yystate = *yyssp; - YY_STACK_PRINT (yyss, yyssp); - } - - if (yyn == YYFINAL) - YYACCEPT; - - *++yyvsp = yylval; - - yyerror_range[1] = yylloc; - /* Using YYLLOC is tempting, but would change the location of - the look-ahead. YYLOC is available though. */ - YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); - *++yylsp = yyloc; - - /* Shift the error token. */ - YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); - - yystate = yyn; - goto yynewstate; - - -/*-------------------------------------. -| yyacceptlab -- YYACCEPT comes here. | -`-------------------------------------*/ -yyacceptlab: - yyresult = 0; - goto yyreturn; - -/*-----------------------------------. -| yyabortlab -- YYABORT comes here. | -`-----------------------------------*/ -yyabortlab: - yyresult = 1; - goto yyreturn; - -#ifndef yyoverflow -/*-------------------------------------------------. -| yyexhaustedlab -- memory exhaustion comes here. | -`-------------------------------------------------*/ -yyexhaustedlab: - yyerror (YY_("memory exhausted")); - yyresult = 2; - /* Fall through. */ -#endif - -yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval, &yylloc); - /* Do not reclaim the symbols of the rule which action triggered - this YYABORT or YYACCEPT. */ - YYPOPSTACK (yylen); - YY_STACK_PRINT (yyss, yyssp); - while (yyssp != yyss) - { - yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp, yylsp); - YYPOPSTACK (1); - } -#ifndef yyoverflow - if (yyss != yyssa) - YYSTACK_FREE (yyss); -#endif -#if YYERROR_VERBOSE - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); -#endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - -#line 340 "dtc-parser.y" - - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} - diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped deleted file mode 100644 index ba99100d55c9..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped +++ /dev/null @@ -1,113 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.3. */ - -/* Skeleton interface for Bison's Yacc-like parsers in C - - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 - Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_PROPNODENAME = 260, - DT_LITERAL = 261, - DT_LEGACYLITERAL = 262, - DT_BASE = 263, - DT_BYTE = 264, - DT_STRING = 265, - DT_LABEL = 266, - DT_REF = 267, - DT_INCBIN = 268 - }; -#endif -/* Tokens. */ -#define DT_V1 258 -#define DT_MEMRESERVE 259 -#define DT_PROPNODENAME 260 -#define DT_LITERAL 261 -#define DT_LEGACYLITERAL 262 -#define DT_BASE 263 -#define DT_BYTE 264 -#define DT_STRING 265 -#define DT_LABEL 266 -#define DT_REF 267 -#define DT_INCBIN 268 - - - - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -#line 37 "dtc-parser.y" -{ - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} -/* Line 1489 of yacc.c. */ -#line 92 "dtc-parser.tab.h" - YYSTYPE; -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 -#endif - -extern YYSTYPE yylval; - -#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED -typedef struct YYLTYPE -{ - int first_line; - int first_column; - int last_line; - int last_column; -} YYLTYPE; -# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ -# define YYLTYPE_IS_DECLARED 1 -# define YYLTYPE_IS_TRIVIAL 1 -#endif - -extern YYLTYPE yylloc; diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/arch/powerpc/boot/dtc-src/dtc-parser.y deleted file mode 100644 index b2ab562420ea..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc-parser.y +++ /dev/null @@ -1,379 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -%locations - -%{ -#include - -#include "dtc.h" -#include "srcpos.h" - -extern int yylex(void); - -extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -%} - -%union { - char *propnodename; - char *literal; - char *labelref; - unsigned int cbase; - uint8_t byte; - struct data data; - - uint64_t addr; - cell_t cell; - struct property *prop; - struct property *proplist; - struct node *node; - struct node *nodelist; - struct reserve_info *re; -} - -%token DT_V1 -%token DT_MEMRESERVE -%token DT_PROPNODENAME -%token DT_LITERAL -%token DT_LEGACYLITERAL -%token DT_BASE -%token DT_BYTE -%token DT_STRING -%token DT_LABEL -%token DT_REF -%token DT_INCBIN - -%type propdata -%type propdataprefix -%type memreserve -%type memreserves -%type v0_memreserve -%type v0_memreserves -%type addr -%type celllist -%type cellbase -%type cellval -%type bytestring -%type propdef -%type proplist - -%type devicetree -%type nodedef -%type subnode -%type subnodes -%type label - -%% - -sourcefile: - DT_V1 ';' memreserves devicetree - { - the_boot_info = build_boot_info($3, $4, 0); - } - | v0_memreserves devicetree - { - the_boot_info = build_boot_info($1, $2, 0); - } - ; - -memreserves: - /* empty */ - { - $$ = NULL; - } - | memreserve memreserves - { - $$ = chain_reserve_entry($1, $2); - } - ; - -memreserve: - label DT_MEMRESERVE addr addr ';' - { - $$ = build_reserve_entry($3, $4, $1); - } - ; - -v0_memreserves: - /* empty */ - { - $$ = NULL; - } - | v0_memreserve v0_memreserves - { - $$ = chain_reserve_entry($1, $2); - }; - ; - -v0_memreserve: - memreserve - { - $$ = $1; - } - | label DT_MEMRESERVE addr '-' addr ';' - { - $$ = build_reserve_entry($3, $5 - $3 + 1, $1); - } - ; - -addr: - DT_LITERAL - { - $$ = eval_literal($1, 0, 64); - } - | DT_LEGACYLITERAL - { - $$ = eval_literal($1, 16, 64); - } - ; - -devicetree: - '/' nodedef - { - $$ = name_node($2, "", NULL); - } - ; - -nodedef: - '{' proplist subnodes '}' ';' - { - $$ = build_node($2, $3); - } - ; - -proplist: - /* empty */ - { - $$ = NULL; - } - | proplist propdef - { - $$ = chain_property($2, $1); - } - ; - -propdef: - label DT_PROPNODENAME '=' propdata ';' - { - $$ = build_property($2, $4, $1); - } - | label DT_PROPNODENAME ';' - { - $$ = build_property($2, empty_data, $1); - } - ; - -propdata: - propdataprefix DT_STRING - { - $$ = data_merge($1, $2); - } - | propdataprefix '<' celllist '>' - { - $$ = data_merge($1, $3); - } - | propdataprefix '[' bytestring ']' - { - $$ = data_merge($1, $3); - } - | propdataprefix DT_REF - { - $$ = data_add_marker($1, REF_PATH, $2); - } - | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - if ($6 != 0) - if (fseek(file->file, $6, SEEK_SET) != 0) - yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)$6, - $4.val, strerror(errno)); - - d = data_copy_file(file->file, $8); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdataprefix DT_INCBIN '(' DT_STRING ')' - { - struct search_path path = { srcpos_file->dir, NULL, NULL }; - struct dtc_file *file = dtc_open_file($4.val, &path); - struct data d = empty_data; - - d = data_copy_file(file->file, -1); - - $$ = data_merge($1, d); - dtc_close_file(file); - } - | propdata DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -propdataprefix: - /* empty */ - { - $$ = empty_data; - } - | propdata ',' - { - $$ = $1; - } - | propdataprefix DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -celllist: - /* empty */ - { - $$ = empty_data; - } - | celllist cellval - { - $$ = data_append_cell($1, $2); - } - | celllist DT_REF - { - $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, - $2), -1); - } - | celllist DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -cellbase: - /* empty */ - { - $$ = 16; - } - | DT_BASE - ; - -cellval: - DT_LITERAL - { - $$ = eval_literal($1, 0, 32); - } - | cellbase DT_LEGACYLITERAL - { - $$ = eval_literal($2, $1, 32); - } - ; - -bytestring: - /* empty */ - { - $$ = empty_data; - } - | bytestring DT_BYTE - { - $$ = data_append_byte($1, $2); - } - | bytestring DT_LABEL - { - $$ = data_add_marker($1, LABEL, $2); - } - ; - -subnodes: - /* empty */ - { - $$ = NULL; - } - | subnode subnodes - { - $$ = chain_node($1, $2); - } - | subnode propdef - { - yyerror("syntax error: properties must precede subnodes"); - YYERROR; - } - ; - -subnode: - label DT_PROPNODENAME nodedef - { - $$ = name_node($3, $2, $1); - } - ; - -label: - /* empty */ - { - $$ = NULL; - } - | DT_LABEL - { - $$ = $1; - } - ; - -%% - -void yyerrorf(char const *s, ...) -{ - const char *fname = srcpos_file ? srcpos_file->name : ""; - va_list va; - va_start(va, s); - - if (strcmp(fname, "-") == 0) - fname = "stdin"; - - fprintf(stderr, "%s:%d ", fname, yylloc.first_line); - vfprintf(stderr, s, va); - fprintf(stderr, "\n"); - - treesource_error = 1; - va_end(va); -} - -void yyerror (char const *s) -{ - yyerrorf("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) - yyerror("bad characters in literal"); - else if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - yyerror("literal out of range"); - else if (errno != 0) - yyerror("bad literal"); - return val; -} diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/arch/powerpc/boot/dtc-src/dtc.c deleted file mode 100644 index d8fd43b4ac1a..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#include "version_gen.h" - -/* - * Command line options - */ -int quiet; /* Level of quietness */ -int reservenum; /* Number of memory reservation slots */ -int minsize; /* Minimum blob size */ -int padsize; /* Additional padding to blob */ - -char *join_path(const char *path, const char *name) -{ - int lenp = strlen(path); - int lenn = strlen(name); - int len; - int needslash = 1; - char *str; - - len = lenp + lenn + 2; - if ((lenp > 0) && (path[lenp-1] == '/')) { - needslash = 0; - len--; - } - - str = xmalloc(len); - memcpy(str, path, lenp); - if (needslash) { - str[lenp] = '/'; - lenp++; - } - memcpy(str+lenp, name, lenn+1); - return str; -} - -static void fill_fullpaths(struct node *tree, const char *prefix) -{ - struct node *child; - const char *unit; - - tree->fullpath = join_path(prefix, tree->name); - - unit = strchr(tree->name, '@'); - if (unit) - tree->basenamelen = unit - tree->name; - else - tree->basenamelen = strlen(tree->name); - - for_each_child(tree, child) - fill_fullpaths(child, tree->fullpath); -} - -static void __attribute__ ((noreturn)) usage(void) -{ - fprintf(stderr, "Usage:\n"); - fprintf(stderr, "\tdtc [options] \n"); - fprintf(stderr, "\nOptions:\n"); - fprintf(stderr, "\t-h\n"); - fprintf(stderr, "\t\tThis help text\n"); - fprintf(stderr, "\t-q\n"); - fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); - fprintf(stderr, "\t-I \n"); - fprintf(stderr, "\t\tInput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); - fprintf(stderr, "\t-o \n"); - fprintf(stderr, "\t-O \n"); - fprintf(stderr, "\t\tOutput formats are:\n"); - fprintf(stderr, "\t\t\tdts - device tree source text\n"); - fprintf(stderr, "\t\t\tdtb - device tree blob\n"); - fprintf(stderr, "\t\t\tasm - assembler source\n"); - fprintf(stderr, "\t-V \n"); - fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); - fprintf(stderr, "\t-R \n"); - fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); - fprintf(stderr, "\t-S \n"); - fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); - fprintf(stderr, "\t-p \n"); - fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); - fprintf(stderr, "\t-b \n"); - fprintf(stderr, "\t\tSet the physical boot cpu\n"); - fprintf(stderr, "\t-f\n"); - fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); - fprintf(stderr, "\t-v\n"); - fprintf(stderr, "\t\tPrint DTC version and exit\n"); - exit(3); -} - -int main(int argc, char *argv[]) -{ - struct boot_info *bi; - const char *inform = "dts"; - const char *outform = "dts"; - const char *outname = "-"; - int force = 0, check = 0; - const char *arg; - int opt; - FILE *outf = NULL; - int outversion = DEFAULT_FDT_VERSION; - long long cmdline_boot_cpuid = -1; - - quiet = 0; - reservenum = 0; - minsize = 0; - padsize = 0; - - while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { - switch (opt) { - case 'I': - inform = optarg; - break; - case 'O': - outform = optarg; - break; - case 'o': - outname = optarg; - break; - case 'V': - outversion = strtol(optarg, NULL, 0); - break; - case 'R': - reservenum = strtol(optarg, NULL, 0); - break; - case 'S': - minsize = strtol(optarg, NULL, 0); - break; - case 'p': - padsize = strtol(optarg, NULL, 0); - break; - case 'f': - force = 1; - break; - case 'c': - check = 1; - break; - case 'q': - quiet++; - break; - case 'b': - cmdline_boot_cpuid = strtoll(optarg, NULL, 0); - break; - case 'v': - printf("Version: %s\n", DTC_VERSION); - exit(0); - case 'h': - default: - usage(); - } - } - - if (argc > (optind+1)) - usage(); - else if (argc < (optind+1)) - arg = "-"; - else - arg = argv[optind]; - - /* minsize and padsize are mutually exclusive */ - if (minsize && padsize) - die("Can't set both -p and -S\n"); - - fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", - inform, outform, arg); - - if (streq(inform, "dts")) - bi = dt_from_source(arg); - else if (streq(inform, "fs")) - bi = dt_from_fs(arg); - else if(streq(inform, "dtb")) - bi = dt_from_blob(arg); - else - die("Unknown input format \"%s\"\n", inform); - - if (cmdline_boot_cpuid != -1) - bi->boot_cpuid_phys = cmdline_boot_cpuid; - - fill_fullpaths(bi->dt, ""); - process_checks(force, bi); - - - if (streq(outname, "-")) { - outf = stdout; - } else { - outf = fopen(outname, "w"); - if (! outf) - die("Couldn't open output file %s: %s\n", - outname, strerror(errno)); - } - - if (streq(outform, "dts")) { - dt_to_source(outf, bi); - } else if (streq(outform, "dtb")) { - dt_to_blob(outf, bi, outversion); - } else if (streq(outform, "asm")) { - dt_to_asm(outf, bi, outversion); - } else if (streq(outform, "null")) { - /* do nothing */ - } else { - die("Unknown output format \"%s\"\n", outform); - } - - exit(0); -} diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/arch/powerpc/boot/dtc-src/dtc.h deleted file mode 100644 index 08d54c870086..000000000000 --- a/arch/powerpc/boot/dtc-src/dtc.h +++ /dev/null @@ -1,246 +0,0 @@ -#ifndef _DTC_H -#define _DTC_H - -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEFAULT_FDT_VERSION 17 -/* - * Command line options - */ -extern int quiet; /* Level of quietness */ -extern int reservenum; /* Number of memory reservation slots */ -extern int minsize; /* Minimum blob size */ -extern int padsize; /* Additional padding to blob */ - -static inline void __attribute__((noreturn)) die(char * str, ...) -{ - va_list ap; - - va_start(ap, str); - fprintf(stderr, "FATAL ERROR: "); - vfprintf(stderr, str, ap); - exit(1); -} - -static inline void *xmalloc(size_t len) -{ - void *new = malloc(len); - - if (! new) - die("malloc() failed\n"); - - return new; -} - -static inline void *xrealloc(void *p, size_t len) -{ - void *new = realloc(p, len); - - if (! new) - die("realloc() failed (len=%d)\n", len); - - return new; -} - -typedef uint32_t cell_t; - - -#define streq(a, b) (strcmp((a), (b)) == 0) -#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) - -#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) - -/* Data blobs */ -enum markertype { - REF_PHANDLE, - REF_PATH, - LABEL, -}; - -struct marker { - enum markertype type; - int offset; - char *ref; - struct marker *next; -}; - -struct data { - int len; - char *val; - struct marker *markers; -}; - - -#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) - -#define for_each_marker(m) \ - for (; (m); (m) = (m)->next) -#define for_each_marker_of_type(m, t) \ - for_each_marker(m) \ - if ((m)->type == (t)) - -void data_free(struct data d); - -struct data data_grow_for(struct data d, int xlen); - -struct data data_copy_mem(const char *mem, int len); -struct data data_copy_escape_string(const char *s, int len); -struct data data_copy_file(FILE *f, size_t len); - -struct data data_append_data(struct data d, const void *p, int len); -struct data data_insert_at_marker(struct data d, struct marker *m, - const void *p, int len); -struct data data_merge(struct data d1, struct data d2); -struct data data_append_cell(struct data d, cell_t word); -struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); -struct data data_append_addr(struct data d, uint64_t addr); -struct data data_append_byte(struct data d, uint8_t byte); -struct data data_append_zeroes(struct data d, int len); -struct data data_append_align(struct data d, int align); - -struct data data_add_marker(struct data d, enum markertype type, char *ref); - -int data_is_one_string(struct data d); - -/* DT constraints */ - -#define MAX_PROPNAME_LEN 31 -#define MAX_NODENAME_LEN 31 - -/* Live trees */ -struct property { - char *name; - struct data val; - - struct property *next; - - char *label; -}; - -struct node { - char *name; - struct property *proplist; - struct node *children; - - struct node *parent; - struct node *next_sibling; - - char *fullpath; - int basenamelen; - - cell_t phandle; - int addr_cells, size_cells; - - char *label; -}; - -#define for_each_property(n, p) \ - for ((p) = (n)->proplist; (p); (p) = (p)->next) - -#define for_each_child(n, c) \ - for ((c) = (n)->children; (c); (c) = (c)->next_sibling) - -struct property *build_property(char *name, struct data val, char *label); -struct property *chain_property(struct property *first, struct property *list); -struct property *reverse_properties(struct property *first); - -struct node *build_node(struct property *proplist, struct node *children); -struct node *name_node(struct node *node, char *name, char *label); -struct node *chain_node(struct node *first, struct node *list); - -void add_property(struct node *node, struct property *prop); -void add_child(struct node *parent, struct node *child); - -const char *get_unitname(struct node *node); -struct property *get_property(struct node *node, const char *propname); -cell_t propval_cell(struct property *prop); -struct node *get_subnode(struct node *node, const char *nodename); -struct node *get_node_by_path(struct node *tree, const char *path); -struct node *get_node_by_label(struct node *tree, const char *label); -struct node *get_node_by_phandle(struct node *tree, cell_t phandle); -struct node *get_node_by_ref(struct node *tree, const char *ref); -cell_t get_node_phandle(struct node *root, struct node *node); - -/* Boot info (tree plus memreserve information */ - -struct reserve_info { - struct fdt_reserve_entry re; - - struct reserve_info *next; - - char *label; -}; - -struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list); -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new); - - -struct boot_info { - struct reserve_info *reservelist; - struct node *dt; /* the device tree */ - uint32_t boot_cpuid_phys; -}; - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys); - -/* Checks */ - -void process_checks(int force, struct boot_info *bi); - -/* Flattened trees */ - -void dt_to_blob(FILE *f, struct boot_info *bi, int version); -void dt_to_asm(FILE *f, struct boot_info *bi, int version); - -struct boot_info *dt_from_blob(const char *fname); - -/* Tree source */ - -void dt_to_source(FILE *f, struct boot_info *bi); -struct boot_info *dt_from_source(const char *f); - -/* FS trees */ - -struct boot_info *dt_from_fs(const char *dirname); - -/* misc */ - -char *join_path(const char *path, const char *name); - -#endif /* _DTC_H */ diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/arch/powerpc/boot/dtc-src/flattree.c deleted file mode 100644 index 76acd28c068d..000000000000 --- a/arch/powerpc/boot/dtc-src/flattree.c +++ /dev/null @@ -1,906 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -#define FTF_FULLPATH 0x1 -#define FTF_VARALIGN 0x2 -#define FTF_NAMEPROPS 0x4 -#define FTF_BOOTCPUID 0x8 -#define FTF_STRTABSIZE 0x10 -#define FTF_STRUCTSIZE 0x20 -#define FTF_NOPS 0x40 - -static struct version_info { - int version; - int last_comp_version; - int hdr_size; - int flags; -} version_table[] = { - {1, 1, FDT_V1_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, - {2, 1, FDT_V2_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, - {3, 1, FDT_V3_SIZE, - FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, - {16, 16, FDT_V3_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, - {17, 16, FDT_V17_SIZE, - FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, -}; - -struct emitter { - void (*cell)(void *, cell_t); - void (*string)(void *, char *, int); - void (*align)(void *, int); - void (*data)(void *, struct data); - void (*beginnode)(void *, const char *); - void (*endnode)(void *, const char *); - void (*property)(void *, const char *); -}; - -static void bin_emit_cell(void *e, cell_t val) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_cell(*dtbuf, val); -} - -static void bin_emit_string(void *e, char *str, int len) -{ - struct data *dtbuf = e; - - if (len == 0) - len = strlen(str); - - *dtbuf = data_append_data(*dtbuf, str, len); - *dtbuf = data_append_byte(*dtbuf, '\0'); -} - -static void bin_emit_align(void *e, int a) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_align(*dtbuf, a); -} - -static void bin_emit_data(void *e, struct data d) -{ - struct data *dtbuf = e; - - *dtbuf = data_append_data(*dtbuf, d.val, d.len); -} - -static void bin_emit_beginnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_BEGIN_NODE); -} - -static void bin_emit_endnode(void *e, const char *label) -{ - bin_emit_cell(e, FDT_END_NODE); -} - -static void bin_emit_property(void *e, const char *label) -{ - bin_emit_cell(e, FDT_PROP); -} - -static struct emitter bin_emitter = { - .cell = bin_emit_cell, - .string = bin_emit_string, - .align = bin_emit_align, - .data = bin_emit_data, - .beginnode = bin_emit_beginnode, - .endnode = bin_emit_endnode, - .property = bin_emit_property, -}; - -static void emit_label(FILE *f, const char *prefix, const char *label) -{ - fprintf(f, "\t.globl\t%s_%s\n", prefix, label); - fprintf(f, "%s_%s:\n", prefix, label); - fprintf(f, "_%s_%s:\n", prefix, label); -} - -static void emit_offset_label(FILE *f, const char *label, int offset) -{ - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s\t= . + %d\n", label, offset); -} - -static void asm_emit_cell(void *e, cell_t val) -{ - FILE *f = e; - - fprintf(f, "\t.long\t0x%x\n", val); -} - -static void asm_emit_string(void *e, char *str, int len) -{ - FILE *f = e; - char c = 0; - - if (len != 0) { - /* XXX: ewww */ - c = str[len]; - str[len] = '\0'; - } - - fprintf(f, "\t.string\t\"%s\"\n", str); - - if (len != 0) { - str[len] = c; - } -} - -static void asm_emit_align(void *e, int a) -{ - FILE *f = e; - - fprintf(f, "\t.balign\t%d\n", a); -} - -static void asm_emit_data(void *e, struct data d) -{ - FILE *f = e; - int off = 0; - struct marker *m = d.markers; - - for_each_marker_of_type(m, LABEL) - emit_offset_label(f, m->ref, m->offset); - - while ((d.len - off) >= sizeof(uint32_t)) { - fprintf(f, "\t.long\t0x%x\n", - fdt32_to_cpu(*((uint32_t *)(d.val+off)))); - off += sizeof(uint32_t); - } - - while ((d.len - off) >= 1) { - fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); - off += 1; - } - - assert(off == d.len); -} - -static void asm_emit_beginnode(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); -} - -static void asm_emit_endnode(void *e, const char *label) -{ - FILE *f = e; - - fprintf(f, "\t.long\tFDT_END_NODE\n"); - if (label) { - fprintf(f, "\t.globl\t%s_end\n", label); - fprintf(f, "%s_end:\n", label); - } -} - -static void asm_emit_property(void *e, const char *label) -{ - FILE *f = e; - - if (label) { - fprintf(f, "\t.globl\t%s\n", label); - fprintf(f, "%s:\n", label); - } - fprintf(f, "\t.long\tFDT_PROP\n"); -} - -static struct emitter asm_emitter = { - .cell = asm_emit_cell, - .string = asm_emit_string, - .align = asm_emit_align, - .data = asm_emit_data, - .beginnode = asm_emit_beginnode, - .endnode = asm_emit_endnode, - .property = asm_emit_property, -}; - -static int stringtable_insert(struct data *d, const char *str) -{ - int i; - - /* FIXME: do this more efficiently? */ - - for (i = 0; i < d->len; i++) { - if (streq(str, d->val + i)) - return i; - } - - *d = data_append_data(*d, str, strlen(str)+1); - return i; -} - -static void flatten_tree(struct node *tree, struct emitter *emit, - void *etarget, struct data *strbuf, - struct version_info *vi) -{ - struct property *prop; - struct node *child; - int seen_name_prop = 0; - - emit->beginnode(etarget, tree->label); - - if (vi->flags & FTF_FULLPATH) - emit->string(etarget, tree->fullpath, 0); - else - emit->string(etarget, tree->name, 0); - - emit->align(etarget, sizeof(cell_t)); - - for_each_property(tree, prop) { - int nameoff; - - if (streq(prop->name, "name")) - seen_name_prop = 1; - - nameoff = stringtable_insert(strbuf, prop->name); - - emit->property(etarget, prop->label); - emit->cell(etarget, prop->val.len); - emit->cell(etarget, nameoff); - - if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) - emit->align(etarget, 8); - - emit->data(etarget, prop->val); - emit->align(etarget, sizeof(cell_t)); - } - - if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { - emit->property(etarget, NULL); - emit->cell(etarget, tree->basenamelen+1); - emit->cell(etarget, stringtable_insert(strbuf, "name")); - - if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) - emit->align(etarget, 8); - - emit->string(etarget, tree->name, tree->basenamelen); - emit->align(etarget, sizeof(cell_t)); - } - - for_each_child(tree, child) { - flatten_tree(child, emit, etarget, strbuf, vi); - } - - emit->endnode(etarget, tree->label); -} - -static struct data flatten_reserve_list(struct reserve_info *reservelist, - struct version_info *vi) -{ - struct reserve_info *re; - struct data d = empty_data; - static struct fdt_reserve_entry null_re = {0,0}; - int j; - - for (re = reservelist; re; re = re->next) { - d = data_append_re(d, &re->re); - } - /* - * Add additional reserved slots if the user asked for them. - */ - for (j = 0; j < reservenum; j++) { - d = data_append_re(d, &null_re); - } - - return d; -} - -static void make_fdt_header(struct fdt_header *fdt, - struct version_info *vi, - int reservesize, int dtsize, int strsize, - int boot_cpuid_phys) -{ - int reserve_off; - - reservesize += sizeof(struct fdt_reserve_entry); - - memset(fdt, 0xff, sizeof(*fdt)); - - fdt->magic = cpu_to_fdt32(FDT_MAGIC); - fdt->version = cpu_to_fdt32(vi->version); - fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); - - /* Reserve map should be doubleword aligned */ - reserve_off = ALIGN(vi->hdr_size, 8); - - fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); - fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); - fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize - + dtsize); - fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); - - if (vi->flags & FTF_BOOTCPUID) - fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); - if (vi->flags & FTF_STRTABSIZE) - fdt->size_dt_strings = cpu_to_fdt32(strsize); - if (vi->flags & FTF_STRUCTSIZE) - fdt->size_dt_struct = cpu_to_fdt32(dtsize); -} - -void dt_to_blob(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data blob = empty_data; - struct data reservebuf = empty_data; - struct data dtbuf = empty_data; - struct data strbuf = empty_data; - struct fdt_header fdt; - int padlen = 0; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); - bin_emit_cell(&dtbuf, FDT_END); - - reservebuf = flatten_reserve_list(bi->reservelist, vi); - - /* Make header */ - make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, - bi->boot_cpuid_phys); - - /* - * If the user asked for more space than is used, adjust the totalsize. - */ - if (minsize > 0) { - padlen = minsize - fdt32_to_cpu(fdt.totalsize); - if ((padlen < 0) && (quiet < 1)) - fprintf(stderr, - "Warning: blob size %d >= minimum size %d\n", - fdt32_to_cpu(fdt.totalsize), minsize); - } - - if (padsize > 0) - padlen = padsize; - - if (padlen > 0) { - int tsize = fdt32_to_cpu(fdt.totalsize); - tsize += padlen; - fdt.totalsize = cpu_to_fdt32(tsize); - } - - /* - * Assemble the blob: start with the header, add with alignment - * the reserve buffer, add the reserve map terminating zeroes, - * the device tree itself, and finally the strings. - */ - blob = data_append_data(blob, &fdt, vi->hdr_size); - blob = data_append_align(blob, 8); - blob = data_merge(blob, reservebuf); - blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); - blob = data_merge(blob, dtbuf); - blob = data_merge(blob, strbuf); - - /* - * If the user asked for more space than is used, pad out the blob. - */ - if (padlen > 0) - blob = data_append_zeroes(blob, padlen); - - fwrite(blob.val, blob.len, 1, f); - - if (ferror(f)) - die("Error writing device tree blob: %s\n", strerror(errno)); - - /* - * data_merge() frees the right-hand element so only the blob - * remains to be freed. - */ - data_free(blob); -} - -static void dump_stringtable_asm(FILE *f, struct data strbuf) -{ - const char *p; - int len; - - p = strbuf.val; - - while (p < (strbuf.val + strbuf.len)) { - len = strlen(p); - fprintf(f, "\t.string \"%s\"\n", p); - p += len+1; - } -} - -void dt_to_asm(FILE *f, struct boot_info *bi, int version) -{ - struct version_info *vi = NULL; - int i; - struct data strbuf = empty_data; - struct reserve_info *re; - const char *symprefix = "dt"; - - for (i = 0; i < ARRAY_SIZE(version_table); i++) { - if (version_table[i].version == version) - vi = &version_table[i]; - } - if (!vi) - die("Unknown device tree blob version %d\n", version); - - fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); - fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); - fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); - fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); - fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); - fprintf(f, "#define FDT_END 0x%x\n", FDT_END); - fprintf(f, "\n"); - - emit_label(f, symprefix, "blob_start"); - emit_label(f, symprefix, "header"); - fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); - fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", - symprefix, symprefix); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); - fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", - vi->last_comp_version); - - if (vi->flags & FTF_BOOTCPUID) - fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", - bi->boot_cpuid_phys); - - if (vi->flags & FTF_STRTABSIZE) - fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", - symprefix, symprefix); - - if (vi->flags & FTF_STRUCTSIZE) - fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", - symprefix, symprefix); - - /* - * Reserve map entries. - * Align the reserve map to a doubleword boundary. - * Each entry is an (address, size) pair of u64 values. - * Always supply a zero-sized temination entry. - */ - asm_emit_align(f, 8); - emit_label(f, symprefix, "reserve_map"); - - fprintf(f, "/* Memory reserve map from source file */\n"); - - /* - * Use .long on high and low halfs of u64s to avoid .quad - * as it appears .quad isn't available in some assemblers. - */ - for (re = bi->reservelist; re; re = re->next) { - if (re->label) { - fprintf(f, "\t.globl\t%s\n", re->label); - fprintf(f, "%s:\n", re->label); - } - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.address >> 32), - (unsigned int)(re->re.address & 0xffffffff)); - fprintf(f, "\t.long\t0x%08x, 0x%08x\n", - (unsigned int)(re->re.size >> 32), - (unsigned int)(re->re.size & 0xffffffff)); - } - for (i = 0; i < reservenum; i++) { - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - } - - fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); - - emit_label(f, symprefix, "struct_start"); - flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); - fprintf(f, "\t.long\tFDT_END\n"); - emit_label(f, symprefix, "struct_end"); - - emit_label(f, symprefix, "strings_start"); - dump_stringtable_asm(f, strbuf); - emit_label(f, symprefix, "strings_end"); - - emit_label(f, symprefix, "blob_end"); - - /* - * If the user asked for more space than is used, pad it out. - */ - if (minsize > 0) { - fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", - minsize, symprefix, symprefix); - } - if (padsize > 0) { - fprintf(f, "\t.space\t%d, 0\n", padsize); - } - emit_label(f, symprefix, "blob_abs_end"); - - data_free(strbuf); -} - -struct inbuf { - char *base, *limit, *ptr; -}; - -static void inbuf_init(struct inbuf *inb, void *base, void *limit) -{ - inb->base = base; - inb->limit = limit; - inb->ptr = inb->base; -} - -static void flat_read_chunk(struct inbuf *inb, void *p, int len) -{ - if ((inb->ptr + len) > inb->limit) - die("Premature end of data parsing flat device tree\n"); - - memcpy(p, inb->ptr, len); - - inb->ptr += len; -} - -static uint32_t flat_read_word(struct inbuf *inb) -{ - uint32_t val; - - assert(((inb->ptr - inb->base) % sizeof(val)) == 0); - - flat_read_chunk(inb, &val, sizeof(val)); - - return fdt32_to_cpu(val); -} - -static void flat_realign(struct inbuf *inb, int align) -{ - int off = inb->ptr - inb->base; - - inb->ptr = inb->base + ALIGN(off, align); - if (inb->ptr > inb->limit) - die("Premature end of data parsing flat device tree\n"); -} - -static char *flat_read_string(struct inbuf *inb) -{ - int len = 0; - const char *p = inb->ptr; - char *str; - - do { - if (p >= inb->limit) - die("Premature end of data parsing flat device tree\n"); - len++; - } while ((*p++) != '\0'); - - str = strdup(inb->ptr); - - inb->ptr += len; - - flat_realign(inb, sizeof(uint32_t)); - - return str; -} - -static struct data flat_read_data(struct inbuf *inb, int len) -{ - struct data d = empty_data; - - if (len == 0) - return empty_data; - - d = data_grow_for(d, len); - d.len = len; - - flat_read_chunk(inb, d.val, len); - - flat_realign(inb, sizeof(uint32_t)); - - return d; -} - -static char *flat_read_stringtable(struct inbuf *inb, int offset) -{ - const char *p; - - p = inb->base + offset; - while (1) { - if (p >= inb->limit || p < inb->base) - die("String offset %d overruns string table\n", - offset); - - if (*p == '\0') - break; - - p++; - } - - return strdup(inb->base + offset); -} - -static struct property *flat_read_property(struct inbuf *dtbuf, - struct inbuf *strbuf, int flags) -{ - uint32_t proplen, stroff; - char *name; - struct data val; - - proplen = flat_read_word(dtbuf); - stroff = flat_read_word(dtbuf); - - name = flat_read_stringtable(strbuf, stroff); - - if ((flags & FTF_VARALIGN) && (proplen >= 8)) - flat_realign(dtbuf, 8); - - val = flat_read_data(dtbuf, proplen); - - return build_property(name, val, NULL); -} - - -static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) -{ - struct reserve_info *reservelist = NULL; - struct reserve_info *new; - const char *p; - struct fdt_reserve_entry re; - - /* - * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. - * List terminates at an entry with size equal to zero. - * - * First pass, count entries. - */ - p = inb->ptr; - while (1) { - flat_read_chunk(inb, &re, sizeof(re)); - re.address = fdt64_to_cpu(re.address); - re.size = fdt64_to_cpu(re.size); - if (re.size == 0) - break; - - new = build_reserve_entry(re.address, re.size, NULL); - reservelist = add_reserve_entry(reservelist, new); - } - - return reservelist; -} - - -static char *nodename_from_path(const char *ppath, const char *cpath) -{ - int plen; - - plen = strlen(ppath); - - if (!strneq(ppath, cpath, plen)) - die("Path \"%s\" is not valid as a child of \"%s\"\n", - cpath, ppath); - - /* root node is a special case */ - if (!streq(ppath, "/")) - plen++; - - return strdup(cpath + plen); -} - -static struct node *unflatten_tree(struct inbuf *dtbuf, - struct inbuf *strbuf, - const char *parent_flatname, int flags) -{ - struct node *node; - char *flatname; - uint32_t val; - - node = build_node(NULL, NULL); - - flatname = flat_read_string(dtbuf); - - if (flags & FTF_FULLPATH) - node->name = nodename_from_path(parent_flatname, flatname); - else - node->name = flatname; - - do { - struct property *prop; - struct node *child; - - val = flat_read_word(dtbuf); - switch (val) { - case FDT_PROP: - if (node->children) - fprintf(stderr, "Warning: Flat tree input has " - "subnodes preceding a property.\n"); - prop = flat_read_property(dtbuf, strbuf, flags); - add_property(node, prop); - break; - - case FDT_BEGIN_NODE: - child = unflatten_tree(dtbuf,strbuf, flatname, flags); - add_child(node, child); - break; - - case FDT_END_NODE: - break; - - case FDT_END: - die("Premature FDT_END in device tree blob\n"); - break; - - case FDT_NOP: - if (!(flags & FTF_NOPS)) - fprintf(stderr, "Warning: NOP tag found in flat tree" - " version <16\n"); - - /* Ignore */ - break; - - default: - die("Invalid opcode word %08x in device tree blob\n", - val); - } - } while (val != FDT_END_NODE); - - return node; -} - - -struct boot_info *dt_from_blob(const char *fname) -{ - struct dtc_file *dtcf; - uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; - uint32_t off_dt, off_str, off_mem_rsvmap; - int rc; - char *blob; - struct fdt_header *fdt; - char *p; - struct inbuf dtbuf, strbuf; - struct inbuf memresvbuf; - int sizeleft; - struct reserve_info *reservelist; - struct node *tree; - uint32_t val; - int flags = 0; - - dtcf = dtc_open_file(fname, NULL); - - rc = fread(&magic, sizeof(magic), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob magic number: %s\n", - strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob magic number\n"); - else - die("Mysterious short read reading magic number\n"); - } - - magic = fdt32_to_cpu(magic); - if (magic != FDT_MAGIC) - die("Blob has incorrect magic number\n"); - - rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob size: %s\n", strerror(errno)); - if (rc < 1) { - if (feof(dtcf->file)) - die("EOF reading DT blob size\n"); - else - die("Mysterious short read reading blob size\n"); - } - - totalsize = fdt32_to_cpu(totalsize); - if (totalsize < FDT_V1_SIZE) - die("DT blob size (%d) is too small\n", totalsize); - - blob = xmalloc(totalsize); - - fdt = (struct fdt_header *)blob; - fdt->magic = cpu_to_fdt32(magic); - fdt->totalsize = cpu_to_fdt32(totalsize); - - sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); - p = blob + sizeof(magic) + sizeof(totalsize); - - while (sizeleft) { - if (feof(dtcf->file)) - die("EOF before reading %d bytes of DT blob\n", - totalsize); - - rc = fread(p, 1, sizeleft, dtcf->file); - if (ferror(dtcf->file)) - die("Error reading DT blob: %s\n", - strerror(errno)); - - sizeleft -= rc; - p += rc; - } - - off_dt = fdt32_to_cpu(fdt->off_dt_struct); - off_str = fdt32_to_cpu(fdt->off_dt_strings); - off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); - version = fdt32_to_cpu(fdt->version); - boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); - - if (off_mem_rsvmap >= totalsize) - die("Mem Reserve structure offset exceeds total size\n"); - - if (off_dt >= totalsize) - die("DT structure offset exceeds total size\n"); - - if (off_str > totalsize) - die("String table offset exceeds total size\n"); - - if (version >= 3) { - uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); - if (off_str+size_str > totalsize) - die("String table extends past total size\n"); - inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); - } else { - inbuf_init(&strbuf, blob + off_str, blob + totalsize); - } - - if (version >= 17) { - size_dt = fdt32_to_cpu(fdt->size_dt_struct); - if (off_dt+size_dt > totalsize) - die("Structure block extends past total size\n"); - } - - if (version < 16) { - flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; - } else { - flags |= FTF_NOPS; - } - - inbuf_init(&memresvbuf, - blob + off_mem_rsvmap, blob + totalsize); - inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); - - reservelist = flat_read_mem_reserve(&memresvbuf); - - val = flat_read_word(&dtbuf); - - if (val != FDT_BEGIN_NODE) - die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); - - tree = unflatten_tree(&dtbuf, &strbuf, "", flags); - - val = flat_read_word(&dtbuf); - if (val != FDT_END) - die("Device tree blob doesn't end with FDT_END\n"); - - free(blob); - - dtc_close_file(dtcf); - - return build_boot_info(reservelist, tree, boot_cpuid_phys); -} diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/arch/powerpc/boot/dtc-src/fstree.c deleted file mode 100644 index 766b2694d935..000000000000 --- a/arch/powerpc/boot/dtc-src/fstree.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -#include -#include - -static struct node *read_fstree(const char *dirname) -{ - DIR *d; - struct dirent *de; - struct stat st; - struct node *tree; - - d = opendir(dirname); - if (!d) - die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); - - tree = build_node(NULL, NULL); - - while ((de = readdir(d)) != NULL) { - char *tmpnam; - - if (streq(de->d_name, ".") - || streq(de->d_name, "..")) - continue; - - tmpnam = join_path(dirname, de->d_name); - - if (lstat(tmpnam, &st) < 0) - die("stat(%s): %s\n", tmpnam, strerror(errno)); - - if (S_ISREG(st.st_mode)) { - struct property *prop; - FILE *pfile; - - pfile = fopen(tmpnam, "r"); - if (! pfile) { - fprintf(stderr, - "WARNING: Cannot open %s: %s\n", - tmpnam, strerror(errno)); - } else { - prop = build_property(strdup(de->d_name), - data_copy_file(pfile, - st.st_size), - NULL); - add_property(tree, prop); - fclose(pfile); - } - } else if (S_ISDIR(st.st_mode)) { - struct node *newchild; - - newchild = read_fstree(tmpnam); - newchild = name_node(newchild, strdup(de->d_name), - NULL); - add_child(tree, newchild); - } - - free(tmpnam); - } - - return tree; -} - -struct boot_info *dt_from_fs(const char *dirname) -{ - struct node *tree; - - tree = read_fstree(dirname); - tree = name_node(tree, "", NULL); - - return build_boot_info(NULL, tree, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/arch/powerpc/boot/dtc-src/libfdt_env.h deleted file mode 100644 index 449bf602daf1..000000000000 --- a/arch/powerpc/boot/dtc-src/libfdt_env.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _LIBFDT_ENV_H -#define _LIBFDT_ENV_H - -#include -#include -#include - -#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) -static inline uint32_t fdt32_to_cpu(uint32_t x) -{ - return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); -} -#define cpu_to_fdt32(x) fdt32_to_cpu(x) - -static inline uint64_t fdt64_to_cpu(uint64_t x) -{ - return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) - | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); -} -#define cpu_to_fdt64(x) fdt64_to_cpu(x) -#undef _B - -#endif /* _LIBFDT_ENV_H */ diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/arch/powerpc/boot/dtc-src/livetree.c deleted file mode 100644 index 0ca3de550b3f..000000000000 --- a/arch/powerpc/boot/dtc-src/livetree.c +++ /dev/null @@ -1,308 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" - -/* - * Tree building functions - */ - -struct property *build_property(char *name, struct data val, char *label) -{ - struct property *new = xmalloc(sizeof(*new)); - - new->name = name; - new->val = val; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct property *chain_property(struct property *first, struct property *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct property *reverse_properties(struct property *first) -{ - struct property *p = first; - struct property *head = NULL; - struct property *next; - - while (p) { - next = p->next; - p->next = head; - head = p; - p = next; - } - return head; -} - -struct node *build_node(struct property *proplist, struct node *children) -{ - struct node *new = xmalloc(sizeof(*new)); - struct node *child; - - memset(new, 0, sizeof(*new)); - - new->proplist = reverse_properties(proplist); - new->children = children; - - for_each_child(new, child) { - child->parent = new; - } - - return new; -} - -struct node *name_node(struct node *node, char *name, char * label) -{ - assert(node->name == NULL); - - node->name = name; - - node->label = label; - - return node; -} - -struct node *chain_node(struct node *first, struct node *list) -{ - assert(first->next_sibling == NULL); - - first->next_sibling = list; - return first; -} - -void add_property(struct node *node, struct property *prop) -{ - struct property **p; - - prop->next = NULL; - - p = &node->proplist; - while (*p) - p = &((*p)->next); - - *p = prop; -} - -void add_child(struct node *parent, struct node *child) -{ - struct node **p; - - child->next_sibling = NULL; - child->parent = parent; - - p = &parent->children; - while (*p) - p = &((*p)->next_sibling); - - *p = child; -} - -struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, - char *label) -{ - struct reserve_info *new = xmalloc(sizeof(*new)); - - new->re.address = address; - new->re.size = size; - - new->next = NULL; - - new->label = label; - - return new; -} - -struct reserve_info *chain_reserve_entry(struct reserve_info *first, - struct reserve_info *list) -{ - assert(first->next == NULL); - - first->next = list; - return first; -} - -struct reserve_info *add_reserve_entry(struct reserve_info *list, - struct reserve_info *new) -{ - struct reserve_info *last; - - new->next = NULL; - - if (! list) - return new; - - for (last = list; last->next; last = last->next) - ; - - last->next = new; - - return list; -} - -struct boot_info *build_boot_info(struct reserve_info *reservelist, - struct node *tree, uint32_t boot_cpuid_phys) -{ - struct boot_info *bi; - - bi = xmalloc(sizeof(*bi)); - bi->reservelist = reservelist; - bi->dt = tree; - bi->boot_cpuid_phys = boot_cpuid_phys; - - return bi; -} - -/* - * Tree accessor functions - */ - -const char *get_unitname(struct node *node) -{ - if (node->name[node->basenamelen] == '\0') - return ""; - else - return node->name + node->basenamelen + 1; -} - -struct property *get_property(struct node *node, const char *propname) -{ - struct property *prop; - - for_each_property(node, prop) - if (streq(prop->name, propname)) - return prop; - - return NULL; -} - -cell_t propval_cell(struct property *prop) -{ - assert(prop->val.len == sizeof(cell_t)); - return fdt32_to_cpu(*((cell_t *)prop->val.val)); -} - -struct node *get_subnode(struct node *node, const char *nodename) -{ - struct node *child; - - for_each_child(node, child) - if (streq(child->name, nodename)) - return child; - - return NULL; -} - -struct node *get_node_by_path(struct node *tree, const char *path) -{ - const char *p; - struct node *child; - - if (!path || ! (*path)) - return tree; - - while (path[0] == '/') - path++; - - p = strchr(path, '/'); - - for_each_child(tree, child) { - if (p && strneq(path, child->name, p-path)) - return get_node_by_path(child, p+1); - else if (!p && streq(path, child->name)) - return child; - } - - return NULL; -} - -struct node *get_node_by_label(struct node *tree, const char *label) -{ - struct node *child, *node; - - assert(label && (strlen(label) > 0)); - - if (tree->label && streq(tree->label, label)) - return tree; - - for_each_child(tree, child) { - node = get_node_by_label(child, label); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_phandle(struct node *tree, cell_t phandle) -{ - struct node *child, *node; - - assert((phandle != 0) && (phandle != -1)); - - if (tree->phandle == phandle) - return tree; - - for_each_child(tree, child) { - node = get_node_by_phandle(child, phandle); - if (node) - return node; - } - - return NULL; -} - -struct node *get_node_by_ref(struct node *tree, const char *ref) -{ - if (ref[0] == '/') - return get_node_by_path(tree, ref); - else - return get_node_by_label(tree, ref); -} - -cell_t get_node_phandle(struct node *root, struct node *node) -{ - static cell_t phandle = 1; /* FIXME: ick, static local */ - - if ((node->phandle != 0) && (node->phandle != -1)) - return node->phandle; - - assert(! get_property(node, "linux,phandle")); - - while (get_node_by_phandle(root, phandle)) - phandle++; - - node->phandle = phandle; - add_property(node, - build_property("linux,phandle", - data_append_cell(empty_data, phandle), - NULL)); - - return node->phandle; -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/arch/powerpc/boot/dtc-src/srcpos.c deleted file mode 100644 index 9641b7628b4d..000000000000 --- a/arch/powerpc/boot/dtc-src/srcpos.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -/* - * Like yylineno, this is the current open file pos. - */ - -struct dtc_file *srcpos_file; - -static int dtc_open_one(struct dtc_file *file, - const char *search, - const char *fname) -{ - char *fullname; - - if (search) { - fullname = xmalloc(strlen(search) + strlen(fname) + 2); - - strcpy(fullname, search); - strcat(fullname, "/"); - strcat(fullname, fname); - } else { - fullname = strdup(fname); - } - - file->file = fopen(fullname, "r"); - if (!file->file) { - free(fullname); - return 0; - } - - file->name = fullname; - return 1; -} - - -struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search) -{ - static const struct search_path default_search = { NULL, NULL, NULL }; - - struct dtc_file *file; - const char *slash; - - file = xmalloc(sizeof(struct dtc_file)); - - slash = strrchr(fname, '/'); - if (slash) { - char *dir = xmalloc(slash - fname + 1); - - memcpy(dir, fname, slash - fname); - dir[slash - fname] = 0; - file->dir = dir; - } else { - file->dir = NULL; - } - - if (streq(fname, "-")) { - file->name = "stdin"; - file->file = stdin; - return file; - } - - if (fname[0] == '/') { - file->file = fopen(fname, "r"); - if (!file->file) - goto fail; - - file->name = strdup(fname); - return file; - } - - if (!search) - search = &default_search; - - while (search) { - if (dtc_open_one(file, search->dir, fname)) - return file; - - if (errno != ENOENT) - goto fail; - - search = search->next; - } - -fail: - die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); -} - -void dtc_close_file(struct dtc_file *file) -{ - if (fclose(file->file)) - die("Error closing \"%s\": %s\n", file->name, strerror(errno)); - - free(file->dir); - free(file); -} diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/arch/powerpc/boot/dtc-src/srcpos.h deleted file mode 100644 index e17c7c04db8e..000000000000 --- a/arch/powerpc/boot/dtc-src/srcpos.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -/* - * Augment the standard YYLTYPE with a filenum index into an - * array of all opened filenames. - */ - -#include - -struct dtc_file { - char *dir; - const char *name; - FILE *file; -}; - -#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) -typedef struct YYLTYPE { - int first_line; - int first_column; - int last_line; - int last_column; - struct dtc_file *file; -} YYLTYPE; - -#define YYLTYPE_IS_DECLARED 1 -#define YYLTYPE_IS_TRIVIAL 1 -#endif - -/* Cater to old parser templates. */ -#ifndef YYID -#define YYID(n) (n) -#endif - -#define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - (Current).file = YYRHSLOC (Rhs, N).file; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - (Current).file = YYRHSLOC (Rhs, 0).file; \ - } \ - while (YYID (0)) - - - -extern void yyerror(char const *); -extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); - -extern struct dtc_file *srcpos_file; - -struct search_path { - const char *dir; /* NULL for current directory */ - struct search_path *prev, *next; -}; - -extern struct dtc_file *dtc_open_file(const char *fname, - const struct search_path *search); -extern void dtc_close_file(struct dtc_file *file); diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/arch/powerpc/boot/dtc-src/treesource.c deleted file mode 100644 index ebeb6eb27907..000000000000 --- a/arch/powerpc/boot/dtc-src/treesource.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * (C) Copyright David Gibson , IBM Corporation. 2005. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ - -#include "dtc.h" -#include "srcpos.h" - -extern FILE *yyin; -extern int yyparse(void); - -struct boot_info *the_boot_info; -int treesource_error; - -struct boot_info *dt_from_source(const char *fname) -{ - the_boot_info = NULL; - treesource_error = 0; - - srcpos_file = dtc_open_file(fname, NULL); - yyin = srcpos_file->file; - - if (yyparse() != 0) - die("Unable to parse input tree\n"); - - if (treesource_error) - die("Syntax error parsing input tree\n"); - - return the_boot_info; -} - -static void write_prefix(FILE *f, int level) -{ - int i; - - for (i = 0; i < level; i++) - fputc('\t', f); -} - -int isstring(char c) -{ - return (isprint(c) - || (c == '\0') - || strchr("\a\b\t\n\v\f\r", c)); -} - -static void write_propval_string(FILE *f, struct data val) -{ - const char *str = val.val; - int i; - int newchunk = 1; - struct marker *m = val.markers; - - assert(str[val.len-1] == '\0'); - - for (i = 0; i < (val.len-1); i++) { - char c = str[i]; - - if (newchunk) { - while (m && (m->offset <= i)) { - if (m->type == LABEL) { - assert(m->offset == i); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - fprintf(f, "\""); - newchunk = 0; - } - - switch (c) { - case '\a': - fprintf(f, "\\a"); - break; - case '\b': - fprintf(f, "\\b"); - break; - case '\t': - fprintf(f, "\\t"); - break; - case '\n': - fprintf(f, "\\n"); - break; - case '\v': - fprintf(f, "\\v"); - break; - case '\f': - fprintf(f, "\\f"); - break; - case '\r': - fprintf(f, "\\r"); - break; - case '\\': - fprintf(f, "\\\\"); - break; - case '\"': - fprintf(f, "\\\""); - break; - case '\0': - fprintf(f, "\", "); - newchunk = 1; - break; - default: - if (isprint(c)) - fprintf(f, "%c", c); - else - fprintf(f, "\\x%02hhx", c); - } - } - fprintf(f, "\""); - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } -} - -static void write_propval_cells(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - cell_t *cp = (cell_t *)val.val; - struct marker *m = val.markers; - - fprintf(f, "<"); - for (;;) { - while (m && (m->offset <= ((char *)cp - val.val))) { - if (m->type == LABEL) { - assert(m->offset == ((char *)cp - val.val)); - fprintf(f, "%s: ", m->ref); - } - m = m->next; - } - - fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); - if ((void *)cp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, ">"); -} - -static void write_propval_bytes(FILE *f, struct data val) -{ - void *propend = val.val + val.len; - const char *bp = val.val; - struct marker *m = val.markers; - - fprintf(f, "["); - for (;;) { - while (m && (m->offset == (bp-val.val))) { - if (m->type == LABEL) - fprintf(f, "%s: ", m->ref); - m = m->next; - } - - fprintf(f, "%02hhx", *bp++); - if ((const void *)bp >= propend) - break; - fprintf(f, " "); - } - - /* Wrap up any labels at the end of the value */ - for_each_marker_of_type(m, LABEL) { - assert (m->offset == val.len); - fprintf(f, " %s:", m->ref); - } - fprintf(f, "]"); -} - -static void write_propval(FILE *f, struct property *prop) -{ - int len = prop->val.len; - const char *p = prop->val.val; - struct marker *m = prop->val.markers; - int nnotstring = 0, nnul = 0; - int nnotstringlbl = 0, nnotcelllbl = 0; - int i; - - if (len == 0) { - fprintf(f, ";\n"); - return; - } - - for (i = 0; i < len; i++) { - if (! isstring(p[i])) - nnotstring++; - if (p[i] == '\0') - nnul++; - } - - for_each_marker_of_type(m, LABEL) { - if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) - nnotstringlbl++; - if ((m->offset % sizeof(cell_t)) != 0) - nnotcelllbl++; - } - - fprintf(f, " = "); - if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) - && (nnotstringlbl == 0)) { - write_propval_string(f, prop->val); - } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { - write_propval_cells(f, prop->val); - } else { - write_propval_bytes(f, prop->val); - } - - fprintf(f, ";\n"); -} - -static void write_tree_source_node(FILE *f, struct node *tree, int level) -{ - struct property *prop; - struct node *child; - - write_prefix(f, level); - if (tree->label) - fprintf(f, "%s: ", tree->label); - if (tree->name && (*tree->name)) - fprintf(f, "%s {\n", tree->name); - else - fprintf(f, "/ {\n"); - - for_each_property(tree, prop) { - write_prefix(f, level+1); - if (prop->label) - fprintf(f, "%s: ", prop->label); - fprintf(f, "%s", prop->name); - write_propval(f, prop); - } - for_each_child(tree, child) { - fprintf(f, "\n"); - write_tree_source_node(f, child, level+1); - } - write_prefix(f, level); - fprintf(f, "};\n"); -} - - -void dt_to_source(FILE *f, struct boot_info *bi) -{ - struct reserve_info *re; - - fprintf(f, "/dts-v1/;\n\n"); - - for (re = bi->reservelist; re; re = re->next) { - if (re->label) - fprintf(f, "%s: ", re->label); - fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", - (unsigned long long)re->re.address, - (unsigned long long)re->re.size); - } - - write_tree_source_node(f, bi->dt, 0); -} - diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/arch/powerpc/boot/dtc-src/version_gen.h deleted file mode 100644 index 658ff42429d6..000000000000 --- a/arch/powerpc/boot/dtc-src/version_gen.h +++ /dev/null @@ -1 +0,0 @@ -#define DTC_VERSION "DTC 1.2.0" diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/arch/powerpc/boot/libfdt/Makefile.libfdt deleted file mode 100644 index 6c42acfa21ec..000000000000 --- a/arch/powerpc/boot/libfdt/Makefile.libfdt +++ /dev/null @@ -1,8 +0,0 @@ -# Makefile.libfdt -# -# This is not a complete Makefile of itself. Instead, it is designed to -# be easily embeddable into other systems of Makefiles. -# -LIBFDT_INCLUDES = fdt.h libfdt.h -LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff --git a/arch/powerpc/boot/libfdt/fdt.c b/arch/powerpc/boot/libfdt/fdt.c deleted file mode 100644 index 2acaec5923ae..000000000000 --- a/arch/powerpc/boot/libfdt/fdt.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_check_header(const void *fdt) -{ - if (fdt_magic(fdt) == FDT_MAGIC) { - /* Complete tree */ - if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) - return -FDT_ERR_BADVERSION; - } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { - /* Unfinished sequential-write blob */ - if (fdt_size_dt_struct(fdt) == 0) - return -FDT_ERR_BADSTATE; - } else { - return -FDT_ERR_BADMAGIC; - } - - return 0; -} - -const void *fdt_offset_ptr(const void *fdt, int offset, int len) -{ - const char *p; - - if (fdt_version(fdt) >= 0x11) - if (((offset + len) < offset) - || ((offset + len) > fdt_size_dt_struct(fdt))) - return NULL; - - p = _fdt_offset_ptr(fdt, offset); - - if (p + len < p) - return NULL; - return p; -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) -{ - const uint32_t *tagp, *lenp; - uint32_t tag; - const char *p; - - if (offset % FDT_TAGSIZE) - return -1; - - tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); - if (! tagp) - return FDT_END; /* premature end */ - tag = fdt32_to_cpu(*tagp); - offset += FDT_TAGSIZE; - - switch (tag) { - case FDT_BEGIN_NODE: - /* skip name */ - do { - p = fdt_offset_ptr(fdt, offset++, 1); - } while (p && (*p != '\0')); - if (! p) - return FDT_END; - break; - case FDT_PROP: - lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); - if (! lenp) - return FDT_END; - /* skip name offset, length and value */ - offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); - break; - } - - if (nextoffset) - *nextoffset = FDT_TAGALIGN(offset); - - return tag; -} - -int _fdt_check_node_offset(const void *fdt, int offset) -{ - if ((offset < 0) || (offset % FDT_TAGSIZE) - || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) - return -FDT_ERR_BADOFFSET; - - return offset; -} - -int fdt_next_node(const void *fdt, int offset, int *depth) -{ - int nextoffset = 0; - uint32_t tag; - - if (offset >= 0) - if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) - return nextoffset; - - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_PROP: - case FDT_NOP: - break; - - case FDT_BEGIN_NODE: - if (depth) - (*depth)++; - break; - - case FDT_END_NODE: - if (depth) - (*depth)--; - break; - - case FDT_END: - return -FDT_ERR_NOTFOUND; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (tag != FDT_BEGIN_NODE); - - return offset; -} - -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) -{ - int len = strlen(s) + 1; - const char *last = strtab + tabsize - len; - const char *p; - - for (p = strtab; p <= last; p++) - if (memcmp(p, s, len) == 0) - return p; - return NULL; -} - -int fdt_move(const void *fdt, void *buf, int bufsize) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_totalsize(fdt) > bufsize) - return -FDT_ERR_NOSPACE; - - memmove(buf, fdt, fdt_totalsize(fdt)); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt.h b/arch/powerpc/boot/libfdt/fdt.h deleted file mode 100644 index 48ccfd910000..000000000000 --- a/arch/powerpc/boot/libfdt/fdt.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _FDT_H -#define _FDT_H - -#ifndef __ASSEMBLY__ - -struct fdt_header { - uint32_t magic; /* magic word FDT_MAGIC */ - uint32_t totalsize; /* total size of DT block */ - uint32_t off_dt_struct; /* offset to structure */ - uint32_t off_dt_strings; /* offset to strings */ - uint32_t off_mem_rsvmap; /* offset to memory reserve map */ - uint32_t version; /* format version */ - uint32_t last_comp_version; /* last compatible version */ - - /* version 2 fields below */ - uint32_t boot_cpuid_phys; /* Which physical CPU id we're - booting on */ - /* version 3 fields below */ - uint32_t size_dt_strings; /* size of the strings block */ - - /* version 17 fields below */ - uint32_t size_dt_struct; /* size of the structure block */ -}; - -struct fdt_reserve_entry { - uint64_t address; - uint64_t size; -}; - -struct fdt_node_header { - uint32_t tag; - char name[0]; -}; - -struct fdt_property { - uint32_t tag; - uint32_t len; - uint32_t nameoff; - char data[0]; -}; - -#endif /* !__ASSEMBLY */ - -#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ -#define FDT_TAGSIZE sizeof(uint32_t) - -#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ -#define FDT_END_NODE 0x2 /* End node */ -#define FDT_PROP 0x3 /* Property: name off, - size, content */ -#define FDT_NOP 0x4 /* nop */ -#define FDT_END 0x9 - -#define FDT_V1_SIZE (7*sizeof(uint32_t)) -#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) -#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) -#define FDT_V16_SIZE FDT_V3_SIZE -#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) - -#endif /* _FDT_H */ diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/arch/powerpc/boot/libfdt/fdt_ro.c deleted file mode 100644 index fbbba44fcd0d..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_ro.c +++ /dev/null @@ -1,469 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_nodename_eq(const void *fdt, int offset, - const char *s, int len) -{ - const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); - - if (! p) - /* short match */ - return 0; - - if (memcmp(p, s, len) != 0) - return 0; - - if (p[len] == '\0') - return 1; - else if (!memchr(s, '@', len) && (p[len] == '@')) - return 1; - else - return 0; -} - -const char *fdt_string(const void *fdt, int stroffset) -{ - return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; -} - -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) -{ - FDT_CHECK_HEADER(fdt); - *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); - *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); - return 0; -} - -int fdt_num_mem_rsv(const void *fdt) -{ - int i = 0; - - while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) - i++; - return i; -} - -int fdt_subnode_offset_namelen(const void *fdt, int offset, - const char *name, int namelen) -{ - int depth; - - FDT_CHECK_HEADER(fdt); - - for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); - (offset >= 0) && (depth > 0); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth < 0) - return -FDT_ERR_NOTFOUND; - else if ((depth == 1) - && _fdt_nodename_eq(fdt, offset, name, namelen)) - return offset; - } - - if (offset < 0) - return offset; /* error */ - else - return -FDT_ERR_NOTFOUND; -} - -int fdt_subnode_offset(const void *fdt, int parentoffset, - const char *name) -{ - return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_path_offset(const void *fdt, const char *path) -{ - const char *end = path + strlen(path); - const char *p = path; - int offset = 0; - - FDT_CHECK_HEADER(fdt); - - if (*path != '/') - return -FDT_ERR_BADPATH; - - while (*p) { - const char *q; - - while (*p == '/') - p++; - if (! *p) - return offset; - q = strchr(p, '/'); - if (! q) - q = end; - - offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); - if (offset < 0) - return offset; - - p = q; - } - - return offset; -} - -const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) -{ - const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - if (len) - *len = strlen(nh->name); - - return nh->name; - - fail: - if (len) - *len = err; - return NULL; -} - -const struct fdt_property *fdt_get_property(const void *fdt, - int nodeoffset, - const char *name, int *lenp) -{ - uint32_t tag; - const struct fdt_property *prop; - int namestroff; - int offset, nextoffset; - int err; - - if (((err = fdt_check_header(fdt)) != 0) - || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) - goto fail; - - nextoffset = err; - do { - offset = nextoffset; - - tag = fdt_next_tag(fdt, offset, &nextoffset); - switch (tag) { - case FDT_END: - err = -FDT_ERR_TRUNCATED; - goto fail; - - case FDT_BEGIN_NODE: - case FDT_END_NODE: - case FDT_NOP: - break; - - case FDT_PROP: - err = -FDT_ERR_BADSTRUCTURE; - prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); - if (! prop) - goto fail; - namestroff = fdt32_to_cpu(prop->nameoff); - if (strcmp(fdt_string(fdt, namestroff), name) == 0) { - /* Found it! */ - int len = fdt32_to_cpu(prop->len); - prop = fdt_offset_ptr(fdt, offset, - sizeof(*prop)+len); - if (! prop) - goto fail; - - if (lenp) - *lenp = len; - - return prop; - } - break; - - default: - err = -FDT_ERR_BADSTRUCTURE; - goto fail; - } - } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); - - err = -FDT_ERR_NOTFOUND; - fail: - if (lenp) - *lenp = err; - return NULL; -} - -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - const struct fdt_property *prop; - - prop = fdt_get_property(fdt, nodeoffset, name, lenp); - if (! prop) - return NULL; - - return prop->data; -} - -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) -{ - const uint32_t *php; - int len; - - php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); - if (!php || (len != sizeof(*php))) - return 0; - - return fdt32_to_cpu(*php); -} - -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) -{ - int pdepth = 0, p = 0; - int offset, depth, namelen; - const char *name; - - FDT_CHECK_HEADER(fdt); - - if (buflen < 2) - return -FDT_ERR_NOSPACE; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (pdepth < depth) - continue; /* overflowed buffer */ - - while (pdepth > depth) { - do { - p--; - } while (buf[p-1] != '/'); - pdepth--; - } - - name = fdt_get_name(fdt, offset, &namelen); - if (!name) - return namelen; - if ((p + namelen + 1) <= buflen) { - memcpy(buf + p, name, namelen); - p += namelen; - buf[p++] = '/'; - pdepth++; - } - - if (offset == nodeoffset) { - if (pdepth < (depth + 1)) - return -FDT_ERR_NOSPACE; - - if (p > 1) /* special case so that root path is "/", not "" */ - p--; - buf[p] = '\0'; - return p; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth) -{ - int offset, depth; - int supernodeoffset = -FDT_ERR_INTERNAL; - - FDT_CHECK_HEADER(fdt); - - if (supernodedepth < 0) - return -FDT_ERR_NOTFOUND; - - for (offset = 0, depth = 0; - (offset >= 0) && (offset <= nodeoffset); - offset = fdt_next_node(fdt, offset, &depth)) { - if (depth == supernodedepth) - supernodeoffset = offset; - - if (offset == nodeoffset) { - if (nodedepth) - *nodedepth = depth; - - if (supernodedepth > depth) - return -FDT_ERR_NOTFOUND; - else - return supernodeoffset; - } - } - - if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) - return -FDT_ERR_BADOFFSET; - else if (offset == -FDT_ERR_BADOFFSET) - return -FDT_ERR_BADSTRUCTURE; - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_depth(const void *fdt, int nodeoffset) -{ - int nodedepth; - int err; - - err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); - if (err) - return (err < 0) ? err : -FDT_ERR_INTERNAL; - return nodedepth; -} - -int fdt_parent_offset(const void *fdt, int nodeoffset) -{ - int nodedepth = fdt_node_depth(fdt, nodeoffset); - - if (nodedepth < 0) - return nodedepth; - return fdt_supernode_atdepth_offset(fdt, nodeoffset, - nodedepth - 1, NULL); -} - -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen) -{ - int offset; - const void *val; - int len; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_getprop(), then if that didn't - * find what we want, we scan over them again making our way - * to the next node. Still it's the easiest to implement - * approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - val = fdt_getprop(fdt, offset, propname, &len); - if (val && (len == proplen) - && (memcmp(val, propval, len) == 0)) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} - -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) -{ - if ((phandle == 0) || (phandle == -1)) - return -FDT_ERR_BADPHANDLE; - phandle = cpu_to_fdt32(phandle); - return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", - &phandle, sizeof(phandle)); -} - -int _stringlist_contains(const char *strlist, int listlen, const char *str) -{ - int len = strlen(str); - const char *p; - - while (listlen >= len) { - if (memcmp(str, strlist, len+1) == 0) - return 1; - p = memchr(strlist, '\0', listlen); - if (!p) - return 0; /* malformed strlist.. */ - listlen -= (p-strlist) + 1; - strlist = p + 1; - } - return 0; -} - -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible) -{ - const void *prop; - int len; - - prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); - if (!prop) - return len; - if (_stringlist_contains(prop, len, compatible)) - return 0; - else - return 1; -} - -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible) -{ - int offset, err; - - FDT_CHECK_HEADER(fdt); - - /* FIXME: The algorithm here is pretty horrible: we scan each - * property of a node in fdt_node_check_compatible(), then if - * that didn't find what we want, we scan over them again - * making our way to the next node. Still it's the easiest to - * implement approach; performance can come later. */ - for (offset = fdt_next_node(fdt, startoffset, NULL); - offset >= 0; - offset = fdt_next_node(fdt, offset, NULL)) { - err = fdt_node_check_compatible(fdt, offset, compatible); - if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) - return err; - else if (err == 0) - return offset; - } - - return offset; /* error from fdt_next_node() */ -} diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/arch/powerpc/boot/libfdt/fdt_rw.c deleted file mode 100644 index 8e7ec4cb7bcd..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_rw.c +++ /dev/null @@ -1,463 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_blocks_misordered(const void *fdt, - int mem_rsv_size, int struct_size) -{ - return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) - || (fdt_off_dt_struct(fdt) < - (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) - || (fdt_off_dt_strings(fdt) < - (fdt_off_dt_struct(fdt) + struct_size)) - || (fdt_totalsize(fdt) < - (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); -} - -static int _fdt_rw_check_header(void *fdt) -{ - FDT_CHECK_HEADER(fdt); - - if (fdt_version(fdt) < 17) - return -FDT_ERR_BADVERSION; - if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), - fdt_size_dt_struct(fdt))) - return -FDT_ERR_BADLAYOUT; - if (fdt_version(fdt) > 17) - fdt_set_version(fdt, 17); - - return 0; -} - -#define FDT_RW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_rw_check_header(fdt)) != 0) \ - return err; \ - } - -static inline int _fdt_data_size(void *fdt) -{ - return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); -} - -static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) -{ - char *p = splicepoint; - char *end = (char *)fdt + _fdt_data_size(fdt); - - if (((p + oldlen) < p) || ((p + oldlen) > end)) - return -FDT_ERR_BADOFFSET; - if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) - return -FDT_ERR_NOSPACE; - memmove(p + newlen, p + oldlen, end - p - oldlen); - return 0; -} - -static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, - int oldn, int newn) -{ - int delta = (newn - oldn) * sizeof(*p); - int err; - err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); - if (err) - return err; - fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_struct(void *fdt, void *p, - int oldlen, int newlen) -{ - int delta = newlen - oldlen; - int err; - - if ((err = _fdt_splice(fdt, p, oldlen, newlen))) - return err; - - fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); - fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); - return 0; -} - -static int _fdt_splice_string(void *fdt, int newlen) -{ - void *p = (char *)fdt - + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); - int err; - - if ((err = _fdt_splice(fdt, p, 0, newlen))) - return err; - - fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); - const char *p; - char *new; - int len = strlen(s) + 1; - int err; - - p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); - if (p) - /* found it */ - return (p - strtab); - - new = strtab + fdt_size_dt_strings(fdt); - err = _fdt_splice_string(fdt, len); - if (err) - return err; - - memcpy(new, s, len); - return (new - strtab); -} - -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) -{ - struct fdt_reserve_entry *re; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); - err = _fdt_splice_mem_rsv(fdt, re, 0, 1); - if (err) - return err; - - re->address = cpu_to_fdt64(address); - re->size = cpu_to_fdt64(size); - return 0; -} - -int fdt_del_mem_rsv(void *fdt, int n) -{ - struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); - int err; - - FDT_RW_CHECK_HEADER(fdt); - - if (n >= fdt_num_mem_rsv(fdt)) - return -FDT_ERR_NOTFOUND; - - err = _fdt_splice_mem_rsv(fdt, re, 1, 0); - if (err) - return err; - return 0; -} - -static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int oldlen; - int err; - - *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); - if (! (*prop)) - return oldlen; - - if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), - FDT_TAGALIGN(len)))) - return err; - - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, - int len, struct fdt_property **prop) -{ - int proplen; - int nextoffset; - int namestroff; - int err; - - if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) - return nextoffset; - - namestroff = _fdt_find_add_string(fdt, name); - if (namestroff < 0) - return namestroff; - - *prop = _fdt_offset_ptr_w(fdt, nextoffset); - proplen = sizeof(**prop) + FDT_TAGALIGN(len); - - err = _fdt_splice_struct(fdt, *prop, 0, proplen); - if (err) - return err; - - (*prop)->tag = cpu_to_fdt32(FDT_PROP); - (*prop)->nameoff = cpu_to_fdt32(namestroff); - (*prop)->len = cpu_to_fdt32(len); - return 0; -} - -int fdt_set_name(void *fdt, int nodeoffset, const char *name) -{ - char *namep; - int oldlen, newlen; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); - if (!namep) - return oldlen; - - newlen = strlen(name); - - err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), - FDT_TAGALIGN(newlen+1)); - if (err) - return err; - - memcpy(namep, name, newlen+1); - return 0; -} - -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - struct fdt_property *prop; - int err; - - FDT_RW_CHECK_HEADER(fdt); - - err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); - if (err == -FDT_ERR_NOTFOUND) - err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); - if (err) - return err; - - memcpy(prop->data, val, len); - return 0; -} - -int fdt_delprop(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len, proplen; - - FDT_RW_CHECK_HEADER(fdt); - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - proplen = sizeof(*prop) + FDT_TAGALIGN(len); - return _fdt_splice_struct(fdt, prop, proplen, 0); -} - -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen) -{ - struct fdt_node_header *nh; - int offset, nextoffset; - int nodelen; - int err; - uint32_t tag; - uint32_t *endtag; - - FDT_RW_CHECK_HEADER(fdt); - - offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); - if (offset >= 0) - return -FDT_ERR_EXISTS; - else if (offset != -FDT_ERR_NOTFOUND) - return offset; - - /* Try to place the new node after the parent's properties */ - fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - } while ((tag == FDT_PROP) || (tag == FDT_NOP)); - - nh = _fdt_offset_ptr_w(fdt, offset); - nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; - - err = _fdt_splice_struct(fdt, nh, 0, nodelen); - if (err) - return err; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); - memcpy(nh->name, name, namelen); - endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); - *endtag = cpu_to_fdt32(FDT_END_NODE); - - return offset; -} - -int fdt_add_subnode(void *fdt, int parentoffset, const char *name) -{ - return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); -} - -int fdt_del_node(void *fdt, int nodeoffset) -{ - int endoffset; - - FDT_RW_CHECK_HEADER(fdt); - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), - endoffset - nodeoffset, 0); -} - -static void _fdt_packblocks(const char *old, char *new, - int mem_rsv_size, int struct_size) -{ - int mem_rsv_off, struct_off, strings_off; - - mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); - struct_off = mem_rsv_off + mem_rsv_size; - strings_off = struct_off + struct_size; - - memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); - fdt_set_off_mem_rsvmap(new, mem_rsv_off); - - memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); - fdt_set_off_dt_struct(new, struct_off); - fdt_set_size_dt_struct(new, struct_size); - - memmove(new + strings_off, old + fdt_off_dt_strings(old), - fdt_size_dt_strings(old)); - fdt_set_off_dt_strings(new, strings_off); - fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); -} - -int fdt_open_into(const void *fdt, void *buf, int bufsize) -{ - int err; - int mem_rsv_size, struct_size; - int newsize; - const char *fdtstart = fdt; - const char *fdtend = fdtstart + fdt_totalsize(fdt); - char *tmp; - - FDT_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - - if (fdt_version(fdt) >= 17) { - struct_size = fdt_size_dt_struct(fdt); - } else { - struct_size = 0; - while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) - ; - } - - if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { - /* no further work necessary */ - err = fdt_move(fdt, buf, bufsize); - if (err) - return err; - fdt_set_version(buf, 17); - fdt_set_size_dt_struct(buf, struct_size); - fdt_set_totalsize(buf, bufsize); - return 0; - } - - /* Need to reorder */ - newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size - + struct_size + fdt_size_dt_strings(fdt); - - if (bufsize < newsize) - return -FDT_ERR_NOSPACE; - - /* First attempt to build converted tree at beginning of buffer */ - tmp = buf; - /* But if that overlaps with the old tree... */ - if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { - /* Try right after the old tree instead */ - tmp = (char *)(uintptr_t)fdtend; - if ((tmp + newsize) > ((char *)buf + bufsize)) - return -FDT_ERR_NOSPACE; - } - - _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); - memmove(buf, tmp, newsize); - - fdt_set_magic(buf, FDT_MAGIC); - fdt_set_totalsize(buf, bufsize); - fdt_set_version(buf, 17); - fdt_set_last_comp_version(buf, 16); - fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); - - return 0; -} - -int fdt_pack(void *fdt) -{ - int mem_rsv_size; - - FDT_RW_CHECK_HEADER(fdt); - - mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) - * sizeof(struct fdt_reserve_entry); - _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); - fdt_set_totalsize(fdt, _fdt_data_size(fdt)); - - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/arch/powerpc/boot/libfdt/fdt_strerror.c deleted file mode 100644 index e6c3ceee8c58..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_strerror.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -struct fdt_errtabent { - const char *str; -}; - -#define FDT_ERRTABENT(val) \ - [(val)] = { .str = #val, } - -static struct fdt_errtabent fdt_errtable[] = { - FDT_ERRTABENT(FDT_ERR_NOTFOUND), - FDT_ERRTABENT(FDT_ERR_EXISTS), - FDT_ERRTABENT(FDT_ERR_NOSPACE), - - FDT_ERRTABENT(FDT_ERR_BADOFFSET), - FDT_ERRTABENT(FDT_ERR_BADPATH), - FDT_ERRTABENT(FDT_ERR_BADSTATE), - - FDT_ERRTABENT(FDT_ERR_TRUNCATED), - FDT_ERRTABENT(FDT_ERR_BADMAGIC), - FDT_ERRTABENT(FDT_ERR_BADVERSION), - FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), - FDT_ERRTABENT(FDT_ERR_BADLAYOUT), -}; -#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) - -const char *fdt_strerror(int errval) -{ - if (errval > 0) - return ""; - else if (errval == 0) - return ""; - else if (errval > -FDT_ERRTABSIZE) { - const char *s = fdt_errtable[-errval].str; - - if (s) - return s; - } - - return ""; -} diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/arch/powerpc/boot/libfdt/fdt_sw.c deleted file mode 100644 index 698329e0ccaf..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_sw.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -static int _fdt_sw_check_header(void *fdt) -{ - if (fdt_magic(fdt) != FDT_SW_MAGIC) - return -FDT_ERR_BADMAGIC; - /* FIXME: should check more details about the header state */ - return 0; -} - -#define FDT_SW_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = _fdt_sw_check_header(fdt)) != 0) \ - return err; \ - } - -static void *_fdt_grab_space(void *fdt, int len) -{ - int offset = fdt_size_dt_struct(fdt); - int spaceleft; - - spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) - - fdt_size_dt_strings(fdt); - - if ((offset + len < offset) || (offset + len > spaceleft)) - return NULL; - - fdt_set_size_dt_struct(fdt, offset + len); - return fdt_offset_ptr_w(fdt, offset, len); -} - -int fdt_create(void *buf, int bufsize) -{ - void *fdt = buf; - - if (bufsize < sizeof(struct fdt_header)) - return -FDT_ERR_NOSPACE; - - memset(buf, 0, bufsize); - - fdt_set_magic(fdt, FDT_SW_MAGIC); - fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); - fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); - fdt_set_totalsize(fdt, bufsize); - - fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), - sizeof(struct fdt_reserve_entry))); - fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); - fdt_set_off_dt_strings(fdt, bufsize); - - return 0; -} - -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) -{ - struct fdt_reserve_entry *re; - int offset; - - FDT_SW_CHECK_HEADER(fdt); - - if (fdt_size_dt_struct(fdt)) - return -FDT_ERR_BADSTATE; - - offset = fdt_off_dt_struct(fdt); - if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) - return -FDT_ERR_NOSPACE; - - re = (struct fdt_reserve_entry *)((char *)fdt + offset); - re->address = cpu_to_fdt64(addr); - re->size = cpu_to_fdt64(size); - - fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); - - return 0; -} - -int fdt_finish_reservemap(void *fdt) -{ - return fdt_add_reservemap_entry(fdt, 0, 0); -} - -int fdt_begin_node(void *fdt, const char *name) -{ - struct fdt_node_header *nh; - int namelen = strlen(name) + 1; - - FDT_SW_CHECK_HEADER(fdt); - - nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); - if (! nh) - return -FDT_ERR_NOSPACE; - - nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); - memcpy(nh->name, name, namelen); - return 0; -} - -int fdt_end_node(void *fdt) -{ - uint32_t *en; - - FDT_SW_CHECK_HEADER(fdt); - - en = _fdt_grab_space(fdt, FDT_TAGSIZE); - if (! en) - return -FDT_ERR_NOSPACE; - - *en = cpu_to_fdt32(FDT_END_NODE); - return 0; -} - -static int _fdt_find_add_string(void *fdt, const char *s) -{ - char *strtab = (char *)fdt + fdt_totalsize(fdt); - const char *p; - int strtabsize = fdt_size_dt_strings(fdt); - int len = strlen(s) + 1; - int struct_top, offset; - - p = _fdt_find_string(strtab - strtabsize, strtabsize, s); - if (p) - return p - strtab; - - /* Add it */ - offset = -strtabsize - len; - struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - if (fdt_totalsize(fdt) + offset < struct_top) - return 0; /* no more room :( */ - - memcpy(strtab + offset, s, len); - fdt_set_size_dt_strings(fdt, strtabsize + len); - return offset; -} - -int fdt_property(void *fdt, const char *name, const void *val, int len) -{ - struct fdt_property *prop; - int nameoff; - - FDT_SW_CHECK_HEADER(fdt); - - nameoff = _fdt_find_add_string(fdt, name); - if (nameoff == 0) - return -FDT_ERR_NOSPACE; - - prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); - if (! prop) - return -FDT_ERR_NOSPACE; - - prop->tag = cpu_to_fdt32(FDT_PROP); - prop->nameoff = cpu_to_fdt32(nameoff); - prop->len = cpu_to_fdt32(len); - memcpy(prop->data, val, len); - return 0; -} - -int fdt_finish(void *fdt) -{ - char *p = (char *)fdt; - uint32_t *end; - int oldstroffset, newstroffset; - uint32_t tag; - int offset, nextoffset; - - FDT_SW_CHECK_HEADER(fdt); - - /* Add terminator */ - end = _fdt_grab_space(fdt, sizeof(*end)); - if (! end) - return -FDT_ERR_NOSPACE; - *end = cpu_to_fdt32(FDT_END); - - /* Relocate the string table */ - oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); - newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); - memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); - fdt_set_off_dt_strings(fdt, newstroffset); - - /* Walk the structure, correcting string offsets */ - offset = 0; - while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { - if (tag == FDT_PROP) { - struct fdt_property *prop = - fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); - int nameoff; - - if (! prop) - return -FDT_ERR_BADSTRUCTURE; - - nameoff = fdt32_to_cpu(prop->nameoff); - nameoff += fdt_size_dt_strings(fdt); - prop->nameoff = cpu_to_fdt32(nameoff); - } - offset = nextoffset; - } - - /* Finally, adjust the header */ - fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); - fdt_set_magic(fdt, FDT_MAGIC); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/arch/powerpc/boot/libfdt/fdt_wip.c deleted file mode 100644 index a4652c6e787e..000000000000 --- a/arch/powerpc/boot/libfdt/fdt_wip.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include "libfdt_env.h" - -#include -#include - -#include "libfdt_internal.h" - -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len) -{ - void *propval; - int proplen; - - propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); - if (! propval) - return proplen; - - if (proplen != len) - return -FDT_ERR_NOSPACE; - - memcpy(propval, val, len); - return 0; -} - -static void _fdt_nop_region(void *start, int len) -{ - uint32_t *p; - - for (p = start; (char *)p < ((char *)start + len); p++) - *p = cpu_to_fdt32(FDT_NOP); -} - -int fdt_nop_property(void *fdt, int nodeoffset, const char *name) -{ - struct fdt_property *prop; - int len; - - prop = fdt_get_property_w(fdt, nodeoffset, name, &len); - if (! prop) - return len; - - _fdt_nop_region(prop, len + sizeof(*prop)); - - return 0; -} - -int _fdt_node_end_offset(void *fdt, int nodeoffset) -{ - int level = 0; - uint32_t tag; - int offset, nextoffset; - - tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); - if (tag != FDT_BEGIN_NODE) - return -FDT_ERR_BADOFFSET; - do { - offset = nextoffset; - tag = fdt_next_tag(fdt, offset, &nextoffset); - - switch (tag) { - case FDT_END: - return offset; - - case FDT_BEGIN_NODE: - level++; - break; - - case FDT_END_NODE: - level--; - break; - - case FDT_PROP: - case FDT_NOP: - break; - - default: - return -FDT_ERR_BADSTRUCTURE; - } - } while (level >= 0); - - return nextoffset; -} - -int fdt_nop_node(void *fdt, int nodeoffset) -{ - int endoffset; - - endoffset = _fdt_node_end_offset(fdt, nodeoffset); - if (endoffset < 0) - return endoffset; - - _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), - endoffset - nodeoffset); - return 0; -} diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/arch/powerpc/boot/libfdt/libfdt.h deleted file mode 100644 index ce80e4fb41b2..000000000000 --- a/arch/powerpc/boot/libfdt/libfdt.h +++ /dev/null @@ -1,1076 +0,0 @@ -#ifndef _LIBFDT_H -#define _LIBFDT_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include - -#define FDT_FIRST_SUPPORTED_VERSION 0x10 -#define FDT_LAST_SUPPORTED_VERSION 0x11 - -/* Error codes: informative error codes */ -#define FDT_ERR_NOTFOUND 1 - /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ -#define FDT_ERR_EXISTS 2 - /* FDT_ERR_EXISTS: Attemped to create a node or property which - * already exists */ -#define FDT_ERR_NOSPACE 3 - /* FDT_ERR_NOSPACE: Operation needed to expand the device - * tree, but its buffer did not have sufficient space to - * contain the expanded tree. Use fdt_open_into() to move the - * device tree to a buffer with more space. */ - -/* Error codes: codes for bad parameters */ -#define FDT_ERR_BADOFFSET 4 - /* FDT_ERR_BADOFFSET: Function was passed a structure block - * offset which is out-of-bounds, or which points to an - * unsuitable part of the structure for the operation. */ -#define FDT_ERR_BADPATH 5 - /* FDT_ERR_BADPATH: Function was passed a badly formatted path - * (e.g. missing a leading / for a function which requires an - * absolute path) */ -#define FDT_ERR_BADPHANDLE 6 - /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle - * value. phandle values of 0 and -1 are not permitted. */ -#define FDT_ERR_BADSTATE 7 - /* FDT_ERR_BADSTATE: Function was passed an incomplete device - * tree created by the sequential-write functions, which is - * not sufficiently complete for the requested operation. */ - -/* Error codes: codes for bad device tree blobs */ -#define FDT_ERR_TRUNCATED 8 - /* FDT_ERR_TRUNCATED: Structure block of the given device tree - * ends without an FDT_END tag. */ -#define FDT_ERR_BADMAGIC 9 - /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a - * device tree at all - it is missing the flattened device - * tree magic number. */ -#define FDT_ERR_BADVERSION 10 - /* FDT_ERR_BADVERSION: Given device tree has a version which - * can't be handled by the requested operation. For - * read-write functions, this may mean that fdt_open_into() is - * required to convert the tree to the expected version. */ -#define FDT_ERR_BADSTRUCTURE 11 - /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt - * structure block or other serious error (e.g. misnested - * nodes, or subnodes preceding properties). */ -#define FDT_ERR_BADLAYOUT 12 - /* FDT_ERR_BADLAYOUT: For read-write functions, the given - * device tree has it's sub-blocks in an order that the - * function can't handle (memory reserve map, then structure, - * then strings). Use fdt_open_into() to reorganize the tree - * into a form suitable for the read-write operations. */ - -/* "Can't happen" error indicating a bug in libfdt */ -#define FDT_ERR_INTERNAL 13 - /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. - * Should never be returned, if it is, it indicates a bug in - * libfdt itself. */ - -#define FDT_ERR_MAX 13 - -/**********************************************************************/ -/* Low-level functions (you probably don't need these) */ -/**********************************************************************/ - -const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); -static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) -{ - return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); -} - -uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); - -/**********************************************************************/ -/* Traversal functions */ -/**********************************************************************/ - -int fdt_next_node(const void *fdt, int offset, int *depth); - -/**********************************************************************/ -/* General functions */ -/**********************************************************************/ - -#define fdt_get_header(fdt, field) \ - (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) -#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) -#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) -#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) -#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) -#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) -#define fdt_version(fdt) (fdt_get_header(fdt, version)) -#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) -#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) -#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) -#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) - -#define __fdt_set_hdr(name) \ - static inline void fdt_set_##name(void *fdt, uint32_t val) \ - { \ - struct fdt_header *fdth = fdt; \ - fdth->name = cpu_to_fdt32(val); \ - } -__fdt_set_hdr(magic); -__fdt_set_hdr(totalsize); -__fdt_set_hdr(off_dt_struct); -__fdt_set_hdr(off_dt_strings); -__fdt_set_hdr(off_mem_rsvmap); -__fdt_set_hdr(version); -__fdt_set_hdr(last_comp_version); -__fdt_set_hdr(boot_cpuid_phys); -__fdt_set_hdr(size_dt_strings); -__fdt_set_hdr(size_dt_struct); -#undef __fdt_set_hdr - -/** - * fdt_check_header - sanity check a device tree or possible device tree - * @fdt: pointer to data which might be a flattened device tree - * - * fdt_check_header() checks that the given buffer contains what - * appears to be a flattened device tree with sane information in its - * header. - * - * returns: - * 0, if the buffer appears to contain a valid device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings, as above - */ -int fdt_check_header(const void *fdt); - -/** - * fdt_move - move a device tree around in memory - * @fdt: pointer to the device tree to move - * @buf: pointer to memory where the device is to be moved - * @bufsize: size of the memory space at buf - * - * fdt_move() relocates, if possible, the device tree blob located at - * fdt to the buffer at buf of size bufsize. The buffer may overlap - * with the existing device tree blob at fdt. Therefore, - * fdt_move(fdt, fdt, fdt_totalsize(fdt)) - * should always succeed. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_move(const void *fdt, void *buf, int bufsize); - -/**********************************************************************/ -/* Read-only functions */ -/**********************************************************************/ - -/** - * fdt_string - retrieve a string from the strings block of a device tree - * @fdt: pointer to the device tree blob - * @stroffset: offset of the string within the strings block (native endian) - * - * fdt_string() retrieves a pointer to a single string from the - * strings block of the device tree blob at fdt. - * - * returns: - * a pointer to the string, on success - * NULL, if stroffset is out of bounds - */ -const char *fdt_string(const void *fdt, int stroffset); - -/** - * fdt_num_mem_rsv - retrieve the number of memory reserve map entries - * @fdt: pointer to the device tree blob - * - * Returns the number of entries in the device tree blob's memory - * reservation map. This does not include the terminating 0,0 entry - * or any other (0,0) entries reserved for expansion. - * - * returns: - * the number of entries - */ -int fdt_num_mem_rsv(const void *fdt); - -/** - * fdt_get_mem_rsv - retrieve one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: pointers to 64-bit variables - * - * On success, *address and *size will contain the address and size of - * the n-th reserve map entry from the device tree blob, in - * native-endian format. - * - * returns: - * 0, on success - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); - -/** - * fdt_subnode_offset_namelen - find a subnode based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_subnode_offset(), but only examine the first - * namelen characters of name for matching the subnode name. This is - * useful for finding subnodes based on a portion of a larger string, - * such as a full path. - */ -int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, - const char *name, int namelen); -/** - * fdt_subnode_offset - find a subnode of a given node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_subnode_offset() finds a subnode of the node at structure block - * offset parentoffset with the given name. name may include a unit - * address, in which case fdt_subnode_offset() will find the subnode - * with that unit address, or the unit address may be omitted, in - * which case fdt_subnode_offset() will find an arbitrary subnode - * whose name excluding unit address matches the given name. - * - * returns: - * structure block offset of the requested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); - -/** - * fdt_path_offset - find a tree node by its full path - * @fdt: pointer to the device tree blob - * @path: full path of the node to locate - * - * fdt_path_offset() finds a node of a given path in the device tree. - * Each path component may omit the unit address portion, but the - * results of this are undefined if any such path component is - * ambiguous (that is if there are multiple nodes at the relevant - * level matching the given component, differentiated only by unit - * address). - * - * returns: - * structure block offset of the node with the requested path (>=0), on success - * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid - * -FDT_ERR_NOTFOUND, if the requested node does not exist - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_path_offset(const void *fdt, const char *path); - -/** - * fdt_get_name - retrieve the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the starting node - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_name() retrieves the name (including unit address) of the - * device tree node at structure block offset nodeoffset. If lenp is - * non-NULL, the length of this name is also returned, in the integer - * pointed to by lenp. - * - * returns: - * pointer to the node's name, on success - * If lenp is non-NULL, *lenp contains the length of that name (>=0) - * NULL, on error - * if lenp is non-NULL *lenp contains an error code (<0): - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); - -/** - * fdt_get_property - find a given property in a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_get_property() retrieves a pointer to the fdt_property - * structure within the device tree blob corresponding to the property - * named 'name' of the node at offset nodeoffset. If lenp is - * non-NULL, the length of the property value is also returned, in the - * integer pointed to by lenp. - * - * returns: - * pointer to the structure representing the property - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, - const char *name, - int *lenp) -{ - return (struct fdt_property *)(uintptr_t) - fdt_get_property(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_getprop - retrieve the value of a given property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to find - * @name: name of the property to find - * @lenp: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_getprop() retrieves a pointer to the value of the property - * named 'name' of the node at offset nodeoffset (this will be a - * pointer to within the device blob itself, not a copy of the value). - * If lenp is non-NULL, the length of the property value is also - * returned, in the integer pointed to by lenp. - * - * returns: - * pointer to the property's value - * if lenp is non-NULL, *lenp contains the length of the property - * value (>=0) - * NULL, on error - * if lenp is non-NULL, *lenp contains an error code (<0): - * -FDT_ERR_NOTFOUND, node does not have named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -const void *fdt_getprop(const void *fdt, int nodeoffset, - const char *name, int *lenp); -static inline void *fdt_getprop_w(void *fdt, int nodeoffset, - const char *name, int *lenp) -{ - return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); -} - -/** - * fdt_get_phandle - retrieve the phandle of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of the node - * - * fdt_get_phandle() retrieves the phandle of the device tree node at - * structure block offset nodeoffset. - * - * returns: - * the phandle of the node at nodeoffset, on success (!= 0, != -1) - * 0, if the node has no phandle, or another error occurs - */ -uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); - -/** - * fdt_get_path - determine the full path of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose path to find - * @buf: character buffer to contain the returned path (will be overwritten) - * @buflen: size of the character buffer at buf - * - * fdt_get_path() computes the full path of the node at offset - * nodeoffset, and records that path in the buffer at buf. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * 0, on success - * buf contains the absolute path of the node at - * nodeoffset, as a NUL-terminated string. - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) - * characters and will not fit in the given buffer. - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); - -/** - * fdt_supernode_atdepth_offset - find a specific ancestor of a node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * @supernodedepth: depth of the ancestor to find - * @nodedepth: pointer to an integer variable (will be overwritten) or NULL - * - * fdt_supernode_atdepth_offset() finds an ancestor of the given node - * at a specific depth from the root (where the root itself has depth - * 0, its immediate subnodes depth 1 and so forth). So - * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); - * will always return 0, the offset of the root node. If the node at - * nodeoffset has depth D, then: - * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); - * will return nodeoffset itself. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - - * structure block offset of the node at node offset's ancestor - * of depth supernodedepth (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag -* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, - int supernodedepth, int *nodedepth); - -/** - * fdt_node_depth - find the depth of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_node_depth() finds the depth of a given node. The root node - * has depth 0, its immediate subnodes depth 1 and so forth. - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset. - * - * returns: - * depth of the node at nodeoffset (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_depth(const void *fdt, int nodeoffset); - -/** - * fdt_parent_offset - find the parent of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose parent to find - * - * fdt_parent_offset() locates the parent node of a given node (that - * is, it finds the offset of the node which contains the node at - * nodeoffset as a subnode). - * - * NOTE: This function is expensive, as it must scan the device tree - * structure from the start to nodeoffset, *twice*. - * - * returns: - * structure block offset of the parent of the node at nodeoffset - * (>=0), on success - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_parent_offset(const void *fdt, int nodeoffset); - -/** - * fdt_node_offset_by_prop_value - find nodes with a given property value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @propname: property name to check - * @propval: property value to search for - * @proplen: length of the value in propval - * - * fdt_node_offset_by_prop_value() returns the offset of the first - * node after startoffset, which has a property named propname whose - * value is of length proplen and has value equal to propval; or if - * startoffset is -1, the very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, - * propval, proplen); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, - * propval, proplen); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, - const char *propname, - const void *propval, int proplen); - -/** - * fdt_node_offset_by_phandle - find the node with a given phandle - * @fdt: pointer to the device tree blob - * @phandle: phandle value - * - * fdt_node_offset_by_phandle() returns the offset of the node - * which has the given phandle value. If there is more than one node - * in the tree with the given phandle (an invalid tree), results are - * undefined. - * - * returns: - * structure block offset of the located node (>= 0), on success - * -FDT_ERR_NOTFOUND, no node with that phandle exists - * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); - -/** - * fdt_node_check_compatible: check a node's compatible property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of a tree node - * @compatible: string to match against - * - * - * fdt_node_check_compatible() returns 0 if the given node contains a - * 'compatible' property with the given string as one of its elements, - * it returns non-zero otherwise, or on error. - * - * returns: - * 0, if the node has a 'compatible' property listing the given string - * 1, if the node has a 'compatible' property, but it does not list - * the given string - * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property - * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_check_compatible(const void *fdt, int nodeoffset, - const char *compatible); - -/** - * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value - * @fdt: pointer to the device tree blob - * @startoffset: only find nodes after this offset - * @compatible: 'compatible' string to match against - * - * fdt_node_offset_by_compatible() returns the offset of the first - * node after startoffset, which has a 'compatible' property which - * lists the given compatible string; or if startoffset is -1, the - * very first such node in the tree. - * - * To iterate through all nodes matching the criterion, the following - * idiom can be used: - * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); - * while (offset != -FDT_ERR_NOTFOUND) { - * // other code here - * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); - * } - * - * Note the -1 in the first call to the function, if 0 is used here - * instead, the function will never locate the root node, even if it - * matches the criterion. - * - * returns: - * structure block offset of the located node (>= 0, >startoffset), - * on success - * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the - * tree after startoffset - * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, standard meanings - */ -int fdt_node_offset_by_compatible(const void *fdt, int startoffset, - const char *compatible); - -/**********************************************************************/ -/* Write-in-place functions */ -/**********************************************************************/ - -/** - * fdt_setprop_inplace - change a property's value, but not its size - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to replace the property value with - * @len: length of the property value - * - * fdt_setprop_inplace() replaces the value of a given property with - * the data in val, of length len. This function cannot change the - * size of a property, and so will only work if len is equal to the - * current length of the property. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if len is not equal to the property's current length - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_inplace_cell - change the value of a single-cell property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with - * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. - * - * This function will alter only the bytes in the blob which contain - * the given property value, and will not alter or move any other part - * of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_nop_property - replace a property with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_nop_property() will replace a given property's representation - * in the blob with FDT_NOP tags, effectively removing it from the - * tree. - * - * This function will alter only the bytes in the blob which contain - * the property, and will not alter or move any other part of the - * tree. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_property(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_nop_node - replace a node (subtree) with nop tags - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_nop_node() will replace a given node's representation in the - * blob, including all its subnodes, if any, with FDT_NOP tags, - * effectively removing it from the tree. - * - * This function will alter only the bytes in the blob which contain - * the node and its properties and subnodes, and will not alter or - * move any other part of the tree. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_nop_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Sequential write functions */ -/**********************************************************************/ - -int fdt_create(void *buf, int bufsize); -int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); -int fdt_finish_reservemap(void *fdt); -int fdt_begin_node(void *fdt, const char *name); -int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_property(fdt, name, &val, sizeof(val)); -} -#define fdt_property_string(fdt, name, str) \ - fdt_property(fdt, name, str, strlen(str)+1) -int fdt_end_node(void *fdt); -int fdt_finish(void *fdt); - -/**********************************************************************/ -/* Read-write functions */ -/**********************************************************************/ - -int fdt_open_into(const void *fdt, void *buf, int bufsize); -int fdt_pack(void *fdt); - -/** - * fdt_add_mem_rsv - add one memory reserve map entry - * @fdt: pointer to the device tree blob - * @address, @size: 64-bit values (native endian) - * - * Adds a reserve map entry to the given blob reserving a region at - * address address of length size. - * - * This function will insert data into the reserve map and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new reservation entry - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); - -/** - * fdt_del_mem_rsv - remove a memory reserve map entry - * @fdt: pointer to the device tree blob - * @n: entry to remove - * - * fdt_del_mem_rsv() removes the n-th memory reserve map entry from - * the blob. - * - * This function will delete data from the reservation table and will - * therefore change the indexes of some entries in the table. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there - * are less than n+1 reserve map entries) - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_mem_rsv(void *fdt, int n); - -/** - * fdt_set_name - change the name of a given node - * @fdt: pointer to the device tree blob - * @nodeoffset: structure block offset of a node - * @name: name to give the node - * - * fdt_set_name() replaces the name (including unit address, if any) - * of the given node with the given string. NOTE: this function can't - * efficiently check if the new name is unique amongst the given - * node's siblings; results are undefined if this function is invoked - * with a name equal to one of the given node's siblings. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob - * to contain the new name - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, standard meanings - */ -int fdt_set_name(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_setprop - create or change a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: pointer to data to set the property value to - * @len: length of the property value - * - * fdt_setprop() sets the value of the named property in the given - * node to the given value and length, creating the property if it - * does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_setprop(void *fdt, int nodeoffset, const char *name, - const void *val, int len); - -/** - * fdt_setprop_cell - set a property to a single cell value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @val: 32-bit integer value for the property (native endian) - * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if - * necessary), or creates a new property with that value if it does - * not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) -{ - val = cpu_to_fdt32(val); - return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); -} - -/** - * fdt_setprop_string - set a property to a string value - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to change - * @name: name of the property to change - * @str: string value for the property - * - * fdt_setprop_string() sets the value of the named property in the - * given node to the given string value (using the length of the - * string to determine the new length of the property), or creates a - * new property with that value if it does not already exist. - * - * This function may insert or delete data from the blob, and will - * therefore change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to - * contain the new property value - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_TRUNCATED, standard meanings - */ -#define fdt_setprop_string(fdt, nodeoffset, name, str) \ - fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) - -/** - * fdt_delprop - delete a property - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node whose property to nop - * @name: name of the property to nop - * - * fdt_del_property() will delete the given property. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_NOTFOUND, node does not have the named property - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_delprop(void *fdt, int nodeoffset, const char *name); - -/** - * fdt_add_subnode_namelen - creates a new node based on substring - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * @namelen: number of characters of name to consider - * - * Identical to fdt_add_subnode(), but use only the first namelen - * characters of name as the name of the new node. This is useful for - * creating subnodes based on a portion of a larger string, such as a - * full path. - */ -int fdt_add_subnode_namelen(void *fdt, int parentoffset, - const char *name, int namelen); - -/** - * fdt_add_subnode - creates a new node - * @fdt: pointer to the device tree blob - * @parentoffset: structure block offset of a node - * @name: name of the subnode to locate - * - * fdt_add_subnode() creates a new node as a subnode of the node at - * structure block offset parentoffset, with the given name (which - * should include the unit address, if any). - * - * This function will insert data into the blob, and will therefore - * change the offsets of some existing nodes. - - * returns: - * structure block offset of the created nodeequested subnode (>=0), on success - * -FDT_ERR_NOTFOUND, if the requested subnode does not exist - * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag - * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of - * the given name - * -FDT_ERR_NOSPACE, if there is insufficient free space in the - * blob to contain the new node - * -FDT_ERR_NOSPACE - * -FDT_ERR_BADLAYOUT - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings. - */ -int fdt_add_subnode(void *fdt, int parentoffset, const char *name); - -/** - * fdt_del_node - delete a node (subtree) - * @fdt: pointer to the device tree blob - * @nodeoffset: offset of the node to nop - * - * fdt_del_node() will remove the given node, including all its - * subnodes if any, from the blob. - * - * This function will delete data from the blob, and will therefore - * change the offsets of some existing nodes. - * - * returns: - * 0, on success - * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag - * -FDT_ERR_BADLAYOUT, - * -FDT_ERR_BADMAGIC, - * -FDT_ERR_BADVERSION, - * -FDT_ERR_BADSTATE, - * -FDT_ERR_BADSTRUCTURE, - * -FDT_ERR_TRUNCATED, standard meanings - */ -int fdt_del_node(void *fdt, int nodeoffset); - -/**********************************************************************/ -/* Debugging / informational functions */ -/**********************************************************************/ - -const char *fdt_strerror(int errval); - -#endif /* _LIBFDT_H */ diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/arch/powerpc/boot/libfdt/libfdt_internal.h deleted file mode 100644 index 46eb93e4af5c..000000000000 --- a/arch/powerpc/boot/libfdt/libfdt_internal.h +++ /dev/null @@ -1,95 +0,0 @@ -#ifndef _LIBFDT_INTERNAL_H -#define _LIBFDT_INTERNAL_H -/* - * libfdt - Flat Device Tree manipulation - * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include - -#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) -#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) - -#define FDT_CHECK_HEADER(fdt) \ - { \ - int err; \ - if ((err = fdt_check_header(fdt)) != 0) \ - return err; \ - } - -uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); -int _fdt_check_node_offset(const void *fdt, int offset); -const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); -int _fdt_node_end_offset(void *fdt, int nodeoffset); - -static inline const void *_fdt_offset_ptr(const void *fdt, int offset) -{ - return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; -} - -static inline void *_fdt_offset_ptr_w(void *fdt, int offset) -{ - return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); -} - -static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) -{ - const struct fdt_reserve_entry *rsv_table = - (const struct fdt_reserve_entry *) - ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); - - return rsv_table + n; -} -static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) -{ - return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); -} - -#define FDT_SW_MAGIC (~FDT_MAGIC) - -#endif /* _LIBFDT_INTERNAL_H */ diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c index c58a0dada992..21cd48074ec8 100644 --- a/arch/powerpc/boot/simpleboot.c +++ b/arch/powerpc/boot/simpleboot.c @@ -19,7 +19,7 @@ #include "types.h" #include "io.h" #include "stdio.h" -#include "libfdt/libfdt.h" +#include BSS_STACK(4*1024); diff --git a/scripts/Makefile b/scripts/Makefile index aafdf064feef..9dd5b25a1d53 100644 --- a/scripts/Makefile +++ b/scripts/Makefile @@ -21,6 +21,7 @@ hostprogs-y += unifdef subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux +subdir-$(CONFIG_DTC) += dtc # Let clean descend into subdirs subdir- += basic kconfig package selinux diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile new file mode 100644 index 000000000000..01cdb36fc583 --- /dev/null +++ b/scripts/dtc/Makefile @@ -0,0 +1,54 @@ +# scripts/dtc makefile + +hostprogs-y := dtc +always := $(hostprogs-y) + +dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ + srcpos.o checks.o +dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o + +# Source files need to get at the userspace version of libfdt_env.h to compile + +HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt + +HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC) + +HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC) +HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC) + +# dependencies on generated files need to be listed explicitly +$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h +$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h + +targets += dtc-parser.tab.c dtc-lexer.lex.c + +clean-files += dtc-parser.tab.h + +# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output + +ifdef GENERATE_PARSER + +BISON = bison +FLEX = flex + +quiet_cmd_bison = BISON $@ + cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped +quiet_cmd_flex = FLEX $@ + cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped + +$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE + $(call if_changed,bison) + +$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c + +$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE + $(call if_changed,flex) + +endif diff --git a/scripts/dtc/Makefile.dtc b/scripts/dtc/Makefile.dtc new file mode 100644 index 000000000000..6ddf9ecac669 --- /dev/null +++ b/scripts/dtc/Makefile.dtc @@ -0,0 +1,9 @@ +# Makefile.dtc +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \ + checks.c +DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c +DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o) diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c new file mode 100644 index 000000000000..95485796f253 --- /dev/null +++ b/scripts/dtc/checks.c @@ -0,0 +1,587 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2007. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#ifdef TRACE_CHECKS +#define TRACE(c, ...) \ + do { \ + fprintf(stderr, "=== %s: ", (c)->name); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + } while (0) +#else +#define TRACE(c, fmt, ...) do { } while (0) +#endif + +enum checklevel { + IGNORE = 0, + WARN = 1, + ERROR = 2, +}; + +enum checkstatus { + UNCHECKED = 0, + PREREQ, + PASSED, + FAILED, +}; + +struct check; + +typedef void (*tree_check_fn)(struct check *c, struct node *dt); +typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node); +typedef void (*prop_check_fn)(struct check *c, struct node *dt, + struct node *node, struct property *prop); + +struct check { + const char *name; + tree_check_fn tree_fn; + node_check_fn node_fn; + prop_check_fn prop_fn; + void *data; + enum checklevel level; + enum checkstatus status; + int inprogress; + int num_prereqs; + struct check **prereq; +}; + +#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \ + static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \ + static struct check nm = { \ + .name = #nm, \ + .tree_fn = (tfn), \ + .node_fn = (nfn), \ + .prop_fn = (pfn), \ + .data = (d), \ + .level = (lvl), \ + .status = UNCHECKED, \ + .num_prereqs = ARRAY_SIZE(nm##_prereqs), \ + .prereq = nm##_prereqs, \ + }; + +#define TREE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__) +#define NODE_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__) +#define PROP_CHECK(nm, d, lvl, ...) \ + CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__) +#define BATCH_CHECK(nm, lvl, ...) \ + CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__) + +#ifdef __GNUC__ +static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3))); +#endif +static inline void check_msg(struct check *c, const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + if ((c->level < WARN) || (c->level <= quiet)) + return; /* Suppress message */ + + fprintf(stderr, "%s (%s): ", + (c->level == ERROR) ? "ERROR" : "Warning", c->name); + vfprintf(stderr, fmt, ap); + fprintf(stderr, "\n"); +} + +#define FAIL(c, ...) \ + do { \ + TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \ + (c)->status = FAILED; \ + check_msg((c), __VA_ARGS__); \ + } while (0) + +static void check_nodes_props(struct check *c, struct node *dt, struct node *node) +{ + struct node *child; + struct property *prop; + + TRACE(c, "%s", node->fullpath); + if (c->node_fn) + c->node_fn(c, dt, node); + + if (c->prop_fn) + for_each_property(node, prop) { + TRACE(c, "%s\t'%s'", node->fullpath, prop->name); + c->prop_fn(c, dt, node, prop); + } + + for_each_child(node, child) + check_nodes_props(c, dt, child); +} + +static int run_check(struct check *c, struct node *dt) +{ + int error = 0; + int i; + + assert(!c->inprogress); + + if (c->status != UNCHECKED) + goto out; + + c->inprogress = 1; + + for (i = 0; i < c->num_prereqs; i++) { + struct check *prq = c->prereq[i]; + error |= run_check(prq, dt); + if (prq->status != PASSED) { + c->status = PREREQ; + check_msg(c, "Failed prerequisite '%s'", + c->prereq[i]->name); + } + } + + if (c->status != UNCHECKED) + goto out; + + if (c->node_fn || c->prop_fn) + check_nodes_props(c, dt, dt); + + if (c->tree_fn) + c->tree_fn(c, dt); + if (c->status == UNCHECKED) + c->status = PASSED; + + TRACE(c, "\tCompleted, status %d", c->status); + +out: + c->inprogress = 0; + if ((c->status != PASSED) && (c->level == ERROR)) + error = 1; + return error; +} + +/* + * Utility check functions + */ + +static void check_is_string(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (!data_is_one_string(prop->val)) + FAIL(c, "\"%s\" property in %s is not a string", + propname, node->fullpath); +} +#define CHECK_IS_STRING(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl)) + +static void check_is_cell(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + char *propname = c->data; + + prop = get_property(node, propname); + if (!prop) + return; /* Not present, assumed ok */ + + if (prop->val.len != sizeof(cell_t)) + FAIL(c, "\"%s\" property in %s is not a single cell", + propname, node->fullpath); +} +#define CHECK_IS_CELL(nm, propname, lvl) \ + CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl)) + +/* + * Structural check functions + */ + +static void check_duplicate_node_names(struct check *c, struct node *dt, + struct node *node) +{ + struct node *child, *child2; + + for_each_child(node, child) + for (child2 = child->next_sibling; + child2; + child2 = child2->next_sibling) + if (streq(child->name, child2->name)) + FAIL(c, "Duplicate node name %s", + child->fullpath); +} +NODE_CHECK(duplicate_node_names, NULL, ERROR); + +static void check_duplicate_property_names(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop, *prop2; + + for_each_property(node, prop) + for (prop2 = prop->next; prop2; prop2 = prop2->next) + if (streq(prop->name, prop2->name)) + FAIL(c, "Duplicate property name %s in %s", + prop->name, node->fullpath); +} +NODE_CHECK(duplicate_property_names, NULL, ERROR); + +#define LOWERCASE "abcdefghijklmnopqrstuvwxyz" +#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ" +#define DIGITS "0123456789" +#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-" + +static void check_node_name_chars(struct check *c, struct node *dt, + struct node *node) +{ + int n = strspn(node->name, c->data); + + if (n < strlen(node->name)) + FAIL(c, "Bad character '%c' in node %s", + node->name[n], node->fullpath); +} +NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR); + +static void check_node_name_format(struct check *c, struct node *dt, + struct node *node) +{ + if (strchr(get_unitname(node), '@')) + FAIL(c, "Node %s has multiple '@' characters in name", + node->fullpath); +} +NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars); + +static void check_property_name_chars(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + int n = strspn(prop->name, c->data); + + if (n < strlen(prop->name)) + FAIL(c, "Bad character '%c' in property name \"%s\", node %s", + prop->name[n], prop->name, node->fullpath); +} +PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR); + +static void check_explicit_phandles(struct check *c, struct node *root, + struct node *node) +{ + struct property *prop; + struct node *other; + cell_t phandle; + + prop = get_property(node, "linux,phandle"); + if (! prop) + return; /* No phandle, that's fine */ + + if (prop->val.len != sizeof(cell_t)) { + FAIL(c, "%s has bad length (%d) linux,phandle property", + node->fullpath, prop->val.len); + return; + } + + phandle = propval_cell(prop); + if ((phandle == 0) || (phandle == -1)) { + FAIL(c, "%s has invalid linux,phandle value 0x%x", + node->fullpath, phandle); + return; + } + + other = get_node_by_phandle(root, phandle); + if (other) { + FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)", + node->fullpath, phandle, other->fullpath); + return; + } + + node->phandle = phandle; +} +NODE_CHECK(explicit_phandles, NULL, ERROR); + +static void check_name_properties(struct check *c, struct node *root, + struct node *node) +{ + struct property **pp, *prop = NULL; + + for (pp = &node->proplist; *pp; pp = &((*pp)->next)) + if (streq((*pp)->name, "name")) { + prop = *pp; + break; + } + + if (!prop) + return; /* No name property, that's fine */ + + if ((prop->val.len != node->basenamelen+1) + || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) { + FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead" + " of base node name)", node->fullpath, prop->val.val); + } else { + /* The name property is correct, and therefore redundant. + * Delete it */ + *pp = prop->next; + free(prop->name); + data_free(prop->val); + free(prop); + } +} +CHECK_IS_STRING(name_is_string, "name", ERROR); +NODE_CHECK(name_properties, NULL, ERROR, &name_is_string); + +/* + * Reference fixup functions + */ + +static void fixup_phandle_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + cell_t phandle; + + for_each_marker_of_type(m, REF_PHANDLE) { + assert(m->offset + sizeof(cell_t) <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (! refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + phandle = get_node_phandle(dt, refnode); + *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); + } +} +CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR, + &duplicate_node_names, &explicit_phandles); + +static void fixup_path_references(struct check *c, struct node *dt, + struct node *node, struct property *prop) +{ + struct marker *m = prop->val.markers; + struct node *refnode; + char *path; + + for_each_marker_of_type(m, REF_PATH) { + assert(m->offset <= prop->val.len); + + refnode = get_node_by_ref(dt, m->ref); + if (!refnode) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + path = refnode->fullpath; + prop->val = data_insert_at_marker(prop->val, m, path, + strlen(path) + 1); + } +} +CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR, + &duplicate_node_names); + +/* + * Semantic checks + */ +CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN); +CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN); +CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN); + +CHECK_IS_STRING(device_type_is_string, "device_type", WARN); +CHECK_IS_STRING(model_is_string, "model", WARN); +CHECK_IS_STRING(status_is_string, "status", WARN); + +static void fixup_addr_size_cells(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + + node->addr_cells = -1; + node->size_cells = -1; + + prop = get_property(node, "#address-cells"); + if (prop) + node->addr_cells = propval_cell(prop); + + prop = get_property(node, "#size-cells"); + if (prop) + node->size_cells = propval_cell(prop); +} +CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN, + &address_cells_is_cell, &size_cells_is_cell); + +#define node_addr_cells(n) \ + (((n)->addr_cells == -1) ? 2 : (n)->addr_cells) +#define node_size_cells(n) \ + (((n)->size_cells == -1) ? 1 : (n)->size_cells) + +static void check_reg_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int addr_cells, size_cells, entrylen; + + prop = get_property(node, "reg"); + if (!prop) + return; /* No "reg", that's fine */ + + if (!node->parent) { + FAIL(c, "Root node has a \"reg\" property"); + return; + } + + if (prop->val.len == 0) + FAIL(c, "\"reg\" property in %s is empty", node->fullpath); + + addr_cells = node_addr_cells(node->parent); + size_cells = node_size_cells(node->parent); + entrylen = (addr_cells + size_cells) * sizeof(cell_t); + + if ((prop->val.len % entrylen) != 0) + FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " + "(#address-cells == %d, #size-cells == %d)", + node->fullpath, prop->val.len, addr_cells, size_cells); +} +NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells); + +static void check_ranges_format(struct check *c, struct node *dt, + struct node *node) +{ + struct property *prop; + int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen; + + prop = get_property(node, "ranges"); + if (!prop) + return; + + if (!node->parent) { + FAIL(c, "Root node has a \"ranges\" property"); + return; + } + + p_addr_cells = node_addr_cells(node->parent); + p_size_cells = node_size_cells(node->parent); + c_addr_cells = node_addr_cells(node); + c_size_cells = node_size_cells(node); + entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t); + + if (prop->val.len == 0) { + if (p_addr_cells != c_addr_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#address-cells (%d) differs from %s (%d)", + node->fullpath, c_addr_cells, node->parent->fullpath, + p_addr_cells); + if (p_size_cells != c_size_cells) + FAIL(c, "%s has empty \"ranges\" property but its " + "#size-cells (%d) differs from %s (%d)", + node->fullpath, c_size_cells, node->parent->fullpath, + p_size_cells); + } else if ((prop->val.len % entrylen) != 0) { + FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) " + "(parent #address-cells == %d, child #address-cells == %d, " + "#size-cells == %d)", node->fullpath, prop->val.len, + p_addr_cells, c_addr_cells, c_size_cells); + } +} +NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells); + +/* + * Style checks + */ +static void check_avoid_default_addr_size(struct check *c, struct node *dt, + struct node *node) +{ + struct property *reg, *ranges; + + if (!node->parent) + return; /* Ignore root node */ + + reg = get_property(node, "reg"); + ranges = get_property(node, "ranges"); + + if (!reg && !ranges) + return; + + if ((node->parent->addr_cells == -1)) + FAIL(c, "Relying on default #address-cells value for %s", + node->fullpath); + + if ((node->parent->size_cells == -1)) + FAIL(c, "Relying on default #size-cells value for %s", + node->fullpath); +} +NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells); + +static void check_obsolete_chosen_interrupt_controller(struct check *c, + struct node *dt) +{ + struct node *chosen; + struct property *prop; + + chosen = get_node_by_path(dt, "/chosen"); + if (!chosen) + return; + + prop = get_property(chosen, "interrupt-controller"); + if (prop) + FAIL(c, "/chosen has obsolete \"interrupt-controller\" " + "property"); +} +TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN); + +static struct check *check_table[] = { + &duplicate_node_names, &duplicate_property_names, + &node_name_chars, &node_name_format, &property_name_chars, + &name_is_string, &name_properties, + &explicit_phandles, + &phandle_references, &path_references, + + &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell, + &device_type_is_string, &model_is_string, &status_is_string, + + &addr_size_cells, ®_format, &ranges_format, + + &avoid_default_addr_size, + &obsolete_chosen_interrupt_controller, +}; + +void process_checks(int force, struct boot_info *bi) +{ + struct node *dt = bi->dt; + int i; + int error = 0; + + for (i = 0; i < ARRAY_SIZE(check_table); i++) { + struct check *c = check_table[i]; + + if (c->level != IGNORE) + error = error || run_check(c, dt); + } + + if (error) { + if (!force) { + fprintf(stderr, "ERROR: Input tree has errors, aborting " + "(use -f to force output)\n"); + exit(2); + } else if (quiet < 3) { + fprintf(stderr, "Warning: Input tree has errors, " + "output forced\n"); + } + } +} diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c new file mode 100644 index 000000000000..dd2e3d39d4c1 --- /dev/null +++ b/scripts/dtc/data.c @@ -0,0 +1,321 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +void data_free(struct data d) +{ + struct marker *m, *nm; + + m = d.markers; + while (m) { + nm = m->next; + free(m->ref); + free(m); + m = nm; + } + + if (d.val) + free(d.val); +} + +struct data data_grow_for(struct data d, int xlen) +{ + struct data nd; + int newsize; + + if (xlen == 0) + return d; + + nd = d; + + newsize = xlen; + + while ((d.len + xlen) > newsize) + newsize *= 2; + + nd.val = xrealloc(d.val, newsize); + + return nd; +} + +struct data data_copy_mem(const char *mem, int len) +{ + struct data d; + + d = data_grow_for(empty_data, len); + + d.len = len; + memcpy(d.val, mem, len); + + return d; +} + +static char get_oct_char(const char *s, int *i) +{ + char x[4]; + char *endx; + long val; + + x[3] = '\0'; + strncpy(x, s + *i, 3); + + val = strtol(x, &endx, 8); + + assert(endx > x); + + (*i) += endx - x; + return val; +} + +static char get_hex_char(const char *s, int *i) +{ + char x[3]; + char *endx; + long val; + + x[2] = '\0'; + strncpy(x, s + *i, 2); + + val = strtol(x, &endx, 16); + if (!(endx > x)) + die("\\x used with no following hex digits\n"); + + (*i) += endx - x; + return val; +} + +struct data data_copy_escape_string(const char *s, int len) +{ + int i = 0; + struct data d; + char *q; + + d = data_grow_for(empty_data, strlen(s)+1); + + q = d.val; + while (i < len) { + char c = s[i++]; + + if (c != '\\') { + q[d.len++] = c; + continue; + } + + c = s[i++]; + assert(c); + switch (c) { + case 'a': + q[d.len++] = '\a'; + break; + case 'b': + q[d.len++] = '\b'; + break; + case 't': + q[d.len++] = '\t'; + break; + case 'n': + q[d.len++] = '\n'; + break; + case 'v': + q[d.len++] = '\v'; + break; + case 'f': + q[d.len++] = '\f'; + break; + case 'r': + q[d.len++] = '\r'; + break; + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + i--; /* need to re-read the first digit as + * part of the octal value */ + q[d.len++] = get_oct_char(s, &i); + break; + case 'x': + q[d.len++] = get_hex_char(s, &i); + break; + default: + q[d.len++] = c; + } + } + + q[d.len++] = '\0'; + return d; +} + +struct data data_copy_file(FILE *f, size_t maxlen) +{ + struct data d = empty_data; + + while (!feof(f) && (d.len < maxlen)) { + size_t chunksize, ret; + + if (maxlen == -1) + chunksize = 4096; + else + chunksize = maxlen - d.len; + + d = data_grow_for(d, chunksize); + ret = fread(d.val + d.len, 1, chunksize, f); + + if (ferror(f)) + die("Error reading file into data: %s", strerror(errno)); + + if (d.len + ret < d.len) + die("Overflow reading file into data\n"); + + d.len += ret; + } + + return d; +} + +struct data data_append_data(struct data d, const void *p, int len) +{ + d = data_grow_for(d, len); + memcpy(d.val + d.len, p, len); + d.len += len; + return d; +} + +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len) +{ + d = data_grow_for(d, len); + memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset); + memcpy(d.val + m->offset, p, len); + d.len += len; + + /* Adjust all markers after the one we're inserting at */ + m = m->next; + for_each_marker(m) + m->offset += len; + return d; +} + +struct data data_append_markers(struct data d, struct marker *m) +{ + struct marker **mp = &d.markers; + + /* Find the end of the markerlist */ + while (*mp) + mp = &((*mp)->next); + *mp = m; + return d; +} + +struct data data_merge(struct data d1, struct data d2) +{ + struct data d; + struct marker *m2 = d2.markers; + + d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2); + + /* Adjust for the length of d1 */ + for_each_marker(m2) + m2->offset += d1.len; + + d2.markers = NULL; /* So data_free() doesn't clobber them */ + data_free(d2); + + return d; +} + +struct data data_append_cell(struct data d, cell_t word) +{ + cell_t beword = cpu_to_fdt32(word); + + return data_append_data(d, &beword, sizeof(beword)); +} + +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re) +{ + struct fdt_reserve_entry bere; + + bere.address = cpu_to_fdt64(re->address); + bere.size = cpu_to_fdt64(re->size); + + return data_append_data(d, &bere, sizeof(bere)); +} + +struct data data_append_addr(struct data d, uint64_t addr) +{ + uint64_t beaddr = cpu_to_fdt64(addr); + + return data_append_data(d, &beaddr, sizeof(beaddr)); +} + +struct data data_append_byte(struct data d, uint8_t byte) +{ + return data_append_data(d, &byte, 1); +} + +struct data data_append_zeroes(struct data d, int len) +{ + d = data_grow_for(d, len); + + memset(d.val + d.len, 0, len); + d.len += len; + return d; +} + +struct data data_append_align(struct data d, int align) +{ + int newlen = ALIGN(d.len, align); + return data_append_zeroes(d, newlen - d.len); +} + +struct data data_add_marker(struct data d, enum markertype type, char *ref) +{ + struct marker *m; + + m = xmalloc(sizeof(*m)); + m->offset = d.len; + m->type = type; + m->ref = ref; + m->next = NULL; + + return data_append_markers(d, m); +} + +int data_is_one_string(struct data d) +{ + int i; + int len = d.len; + + if (len == 0) + return 0; + + for (i = 0; i < len-1; i++) + if (d.val[i] == '\0') + return 0; + + if (d.val[len-1] != '\0') + return 0; + + return 1; +} diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l new file mode 100644 index 000000000000..44dbfd3f0976 --- /dev/null +++ b/scripts/dtc/dtc-lexer.l @@ -0,0 +1,320 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%option noyywrap nounput yylineno + +%x INCLUDE +%x BYTESTRING +%x PROPNODENAME +%s V1 + +PROPNODECHAR [a-zA-Z0-9,._+*#?@-] +PATHCHAR ({PROPNODECHAR}|[/]) +LABEL [a-zA-Z_][a-zA-Z0-9_]* +STRING \"([^\\"]|\\.)*\" +WS [[:space:]] +COMMENT "/*"([^*]|\*+[^*/])*\*+"/" +LINECOMMENT "//".*\n + +%{ +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +%} + +%% +<*>"/include/"{WS}*{STRING} { + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + +<*><> { + if (!pop_input_file()) { + yyterminate(); + } + } + +<*>{STRING} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + +<*>"/dts-v1/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + +<*>"/memreserve/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + +<*>{LABEL}: { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + +[bodh]# { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + +[0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + +[0-9]+|0[xX][0-9a-fA-F]+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + +\&{LABEL} { /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +"&{/"{PATHCHAR}+\} { /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + +"&/"{PATHCHAR}+ { /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + +[0-9a-fA-F]{2} { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + +"]" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + +{PROPNODECHAR}+ { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + +"/incbin/" { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + +<*>{WS}+ /* eat whitespace */ +<*>{COMMENT}+ /* eat C-style comments */ +<*>{LINECOMMENT}+ /* eat C++-style comments */ + +<*>. { + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + +%% + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped new file mode 100644 index 000000000000..ac392cb040f6 --- /dev/null +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -0,0 +1,2187 @@ +#line 2 "dtc-lexer.lex.c" + +#line 4 "dtc-lexer.lex.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 34 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include +#include +#include +#include + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have . Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; +#endif /* ! C99 */ + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +extern int yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires + * access to the local variable yy_act. Since yyless() is a macro, it would break + * existing scanners that call yyless() from OUTSIDE yylex. + * One obvious solution it to make yy_act a global. I tried that, and saw + * a 5% performance hit in a non-yylineno scanner, because yy_act is + * normally declared as a register variable-- so it is not worth it. + */ + #define YY_LESS_LINENO(n) \ + do { \ + int yyl;\ + for ( yyl = n; yyl < yyleng; ++yyl )\ + if ( yytext[yyl] == '\n' )\ + --yylineno;\ + }while(0) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +/* The following is because we cannot portably get our hands on size_t + * (without autoconf's help, which isn't available because we want + * flex-generated scanners to compile on their own). + * Given that the standard has decreed that size_t exists since 1989, + * I guess we can afford to depend on it. Manoj. + */ + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + int yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static int yy_n_chars; /* number of characters read into yy_ch_buf */ +int yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +#define yywrap(n) 1 +#define YY_SKIP_YYWRAP + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 20 +#define YY_END_OF_BUFFER 21 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_accept[104] = + { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 21, 19, 16, 16, 19, 19, 19, 7, 7, 19, + 7, 19, 19, 19, 19, 13, 14, 14, 19, 8, + 8, 16, 0, 2, 0, 0, 9, 0, 0, 0, + 0, 0, 0, 7, 7, 5, 0, 6, 0, 12, + 12, 14, 14, 8, 0, 11, 9, 0, 0, 0, + 0, 18, 0, 0, 0, 0, 8, 0, 17, 0, + 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 3, 15, + 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, + + 0, 4, 0 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, 1, 4, 5, 1, 1, 6, 1, 1, + 1, 7, 8, 8, 9, 8, 10, 11, 12, 13, + 13, 13, 13, 13, 13, 13, 13, 14, 1, 1, + 1, 1, 8, 8, 15, 15, 15, 15, 15, 15, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 17, 16, 16, + 1, 18, 19, 1, 16, 1, 15, 20, 21, 22, + + 23, 15, 16, 24, 25, 16, 16, 26, 27, 28, + 24, 16, 16, 29, 30, 31, 32, 33, 16, 17, + 16, 16, 34, 1, 35, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[36] = + { 0, + 1, 1, 1, 1, 2, 1, 2, 2, 2, 3, + 4, 4, 4, 5, 6, 7, 7, 1, 1, 6, + 6, 6, 6, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 8, 1 + } ; + +static yyconst flex_int16_t yy_base[117] = + { 0, + 0, 0, 30, 0, 44, 0, 67, 0, 97, 105, + 302, 303, 35, 44, 40, 94, 112, 0, 129, 152, + 296, 295, 159, 0, 176, 303, 0, 116, 95, 165, + 49, 46, 102, 303, 296, 0, 0, 288, 290, 293, + 264, 266, 270, 0, 0, 303, 0, 303, 264, 303, + 0, 0, 195, 101, 0, 0, 0, 0, 284, 125, + 277, 265, 225, 230, 216, 218, 0, 202, 224, 221, + 217, 107, 196, 188, 303, 206, 179, 186, 178, 185, + 183, 162, 161, 150, 169, 160, 145, 125, 303, 303, + 137, 109, 190, 103, 203, 167, 108, 197, 303, 123, + + 29, 303, 303, 215, 221, 226, 229, 234, 240, 246, + 250, 257, 265, 270, 275, 282 + } ; + +static yyconst flex_int16_t yy_def[117] = + { 0, + 103, 1, 1, 3, 3, 5, 103, 7, 3, 3, + 103, 103, 103, 103, 104, 105, 103, 106, 103, 19, + 19, 20, 103, 107, 20, 103, 108, 109, 105, 103, + 103, 103, 104, 103, 104, 110, 111, 103, 112, 113, + 103, 103, 103, 106, 19, 103, 20, 103, 103, 103, + 20, 108, 109, 103, 114, 110, 111, 115, 112, 112, + 113, 103, 103, 103, 103, 103, 114, 115, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 116, 103, 116, 103, 116, + + 103, 103, 0, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_nxt[339] = + { 0, + 12, 13, 14, 15, 12, 16, 12, 12, 12, 17, + 18, 18, 18, 12, 19, 20, 20, 12, 12, 21, + 19, 21, 19, 22, 20, 20, 20, 20, 20, 20, + 20, 20, 20, 12, 12, 12, 32, 32, 102, 23, + 12, 12, 12, 34, 20, 32, 32, 32, 32, 20, + 20, 20, 20, 20, 24, 24, 24, 35, 25, 54, + 54, 54, 26, 25, 25, 25, 25, 12, 13, 14, + 15, 27, 12, 27, 27, 27, 23, 27, 27, 27, + 12, 28, 28, 28, 12, 12, 28, 28, 28, 28, + 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, + + 12, 12, 29, 36, 103, 34, 17, 30, 31, 31, + 29, 54, 54, 54, 17, 30, 31, 31, 39, 35, + 52, 40, 52, 52, 52, 103, 78, 38, 38, 46, + 101, 60, 79, 41, 69, 97, 42, 94, 43, 45, + 45, 45, 46, 45, 47, 47, 93, 92, 45, 45, + 45, 45, 47, 47, 47, 47, 47, 47, 47, 47, + 47, 47, 47, 47, 47, 39, 47, 91, 40, 90, + 99, 47, 47, 47, 47, 54, 54, 54, 89, 88, + 41, 55, 87, 49, 100, 43, 51, 51, 51, 86, + 51, 95, 95, 96, 85, 51, 51, 51, 51, 52, + + 99, 52, 52, 52, 95, 95, 96, 84, 46, 83, + 82, 81, 39, 79, 100, 33, 33, 33, 33, 33, + 33, 33, 33, 37, 80, 77, 37, 37, 37, 44, + 40, 44, 50, 76, 50, 52, 75, 52, 74, 52, + 52, 53, 73, 53, 53, 53, 53, 56, 56, 56, + 72, 56, 56, 57, 71, 57, 57, 59, 59, 59, + 59, 59, 59, 59, 59, 61, 61, 61, 61, 61, + 61, 61, 61, 67, 70, 67, 68, 68, 68, 62, + 68, 68, 98, 98, 98, 98, 98, 98, 98, 98, + 60, 66, 65, 64, 63, 62, 60, 58, 103, 48, + + 48, 103, 11, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +static yyconst flex_int16_t yy_chk[339] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 3, 13, 13, 101, 3, + 3, 3, 3, 15, 3, 14, 14, 32, 32, 3, + 3, 3, 3, 3, 5, 5, 5, 15, 5, 31, + 31, 31, 5, 5, 5, 5, 5, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + + 7, 7, 9, 16, 29, 33, 9, 9, 9, 9, + 10, 54, 54, 54, 10, 10, 10, 10, 17, 33, + 28, 17, 28, 28, 28, 100, 72, 16, 29, 28, + 97, 60, 72, 17, 60, 94, 17, 92, 17, 19, + 19, 19, 19, 19, 19, 19, 91, 88, 19, 19, + 19, 19, 19, 19, 19, 19, 19, 19, 19, 19, + 19, 19, 20, 20, 20, 23, 20, 87, 23, 86, + 96, 20, 20, 20, 20, 30, 30, 30, 85, 84, + 23, 30, 83, 23, 96, 23, 25, 25, 25, 82, + 25, 93, 93, 93, 81, 25, 25, 25, 25, 53, + + 98, 53, 53, 53, 95, 95, 95, 80, 53, 79, + 78, 77, 76, 74, 98, 104, 104, 104, 104, 104, + 104, 104, 104, 105, 73, 71, 105, 105, 105, 106, + 70, 106, 107, 69, 107, 108, 68, 108, 66, 108, + 108, 109, 65, 109, 109, 109, 109, 110, 110, 110, + 64, 110, 110, 111, 63, 111, 111, 112, 112, 112, + 112, 112, 112, 112, 112, 113, 113, 113, 113, 113, + 113, 113, 113, 114, 62, 114, 115, 115, 115, 61, + 115, 115, 116, 116, 116, 116, 116, 116, 116, 116, + 59, 49, 43, 42, 41, 40, 39, 38, 35, 22, + + 21, 11, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103, 103, 103, + 103, 103, 103, 103, 103, 103, 103, 103 + } ; + +/* Table of booleans, true if rule could match eol. */ +static yyconst flex_int32_t yy_rule_can_match_eol[21] = + { 0, +1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, + 0, }; + +static yy_state_type yy_last_accepting_state; +static char *yy_last_accepting_cpos; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +/* The intent behind this definition is that it'll catch + * any uses of REJECT which flex missed. + */ +#define REJECT reject_used_but_not_detected +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "dtc-lexer.l" +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + + + + +#line 37 "dtc-lexer.l" +#include "dtc.h" +#include "srcpos.h" +#include "dtc-parser.tab.h" + + +/*#define LEXDEBUG 1*/ + +#ifdef LEXDEBUG +#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__) +#else +#define DPRINT(fmt, ...) do { } while (0) +#endif + +static int dts_version; /* = 0 */ + +#define BEGIN_DEFAULT() if (dts_version == 0) { \ + DPRINT("\n"); \ + BEGIN(INITIAL); \ + } else { \ + DPRINT("\n"); \ + BEGIN(V1); \ + } + +static void push_input_file(const char *filename); +static int pop_input_file(void); +#line 638 "dtc-lexer.lex.c" + +#define INITIAL 0 +#define INCLUDE 1 +#define BYTESTRING 2 +#define PROPNODENAME 3 +#define V1 4 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + int n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + +#line 64 "dtc-lexer.l" + +#line 795 "dtc-lexer.lex.c" + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + ++yy_cp; + } + while ( yy_base[yy_current_state] != 303 ); + +yy_find_action: + yy_act = yy_accept[yy_current_state]; + if ( yy_act == 0 ) + { /* have to back up */ + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + yy_act = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + + if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] ) + { + int yyl; + for ( yyl = 0; yyl < yyleng; ++yyl ) + if ( yytext[yyl] == '\n' ) + + yylineno++; +; + } + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ + case 0: /* must back up */ + /* undo the effects of YY_DO_BEFORE_ACTION */ + *yy_cp = (yy_hold_char); + yy_cp = (yy_last_accepting_cpos); + yy_current_state = (yy_last_accepting_state); + goto yy_find_action; + +case 1: +/* rule 1 can match eol */ +YY_RULE_SETUP +#line 65 "dtc-lexer.l" +{ + char *name = strchr(yytext, '\"') + 1; + yytext[yyleng-1] = '\0'; + push_input_file(name); + } + YY_BREAK +case YY_STATE_EOF(INITIAL): +case YY_STATE_EOF(INCLUDE): +case YY_STATE_EOF(BYTESTRING): +case YY_STATE_EOF(PROPNODENAME): +case YY_STATE_EOF(V1): +#line 71 "dtc-lexer.l" +{ + if (!pop_input_file()) { + yyterminate(); + } + } + YY_BREAK +case 2: +/* rule 2 can match eol */ +YY_RULE_SETUP +#line 77 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("String: %s\n", yytext); + yylval.data = data_copy_escape_string(yytext+1, + yyleng-2); + yylloc.first_line = yylineno; + return DT_STRING; + } + YY_BREAK +case 3: +YY_RULE_SETUP +#line 87 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /dts-v1/\n"); + dts_version = 1; + BEGIN_DEFAULT(); + return DT_V1; + } + YY_BREAK +case 4: +YY_RULE_SETUP +#line 96 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Keyword: /memreserve/\n"); + BEGIN_DEFAULT(); + return DT_MEMRESERVE; + } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 104 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Label: %s\n", yytext); + yylval.labelref = strdup(yytext); + yylval.labelref[yyleng-1] = '\0'; + return DT_LABEL; + } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 113 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + if (*yytext == 'b') + yylval.cbase = 2; + else if (*yytext == 'o') + yylval.cbase = 8; + else if (*yytext == 'd') + yylval.cbase = 10; + else + yylval.cbase = 16; + DPRINT("Base: %d\n", yylval.cbase); + return DT_BASE; + } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 128 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LEGACYLITERAL; + } + YY_BREAK +case 8: +YY_RULE_SETUP +#line 136 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.literal = strdup(yytext); + DPRINT("Literal: '%s'\n", yylval.literal); + return DT_LITERAL; + } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 144 "dtc-lexer.l" +{ /* label reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 10: +YY_RULE_SETUP +#line 152 "dtc-lexer.l" +{ /* new-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yytext[yyleng-1] = '\0'; + DPRINT("Ref: %s\n", yytext+2); + yylval.labelref = strdup(yytext+2); + return DT_REF; + } + YY_BREAK +case 11: +YY_RULE_SETUP +#line 161 "dtc-lexer.l" +{ /* old-style path reference */ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Ref: %s\n", yytext+1); + yylval.labelref = strdup(yytext+1); + return DT_REF; + } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 169 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + yylval.byte = strtol(yytext, NULL, 16); + DPRINT("Byte: %02x\n", (int)yylval.byte); + return DT_BYTE; + } + YY_BREAK +case 13: +YY_RULE_SETUP +#line 177 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("/BYTESTRING\n"); + BEGIN_DEFAULT(); + return ']'; + } + YY_BREAK +case 14: +YY_RULE_SETUP +#line 185 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("PropNodeName: %s\n", yytext); + yylval.propnodename = strdup(yytext); + BEGIN_DEFAULT(); + return DT_PROPNODENAME; + } + YY_BREAK +case 15: +YY_RULE_SETUP +#line 194 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Binary Include\n"); + return DT_INCBIN; + } + YY_BREAK +case 16: +/* rule 16 can match eol */ +YY_RULE_SETUP +#line 201 "dtc-lexer.l" +/* eat whitespace */ + YY_BREAK +case 17: +/* rule 17 can match eol */ +YY_RULE_SETUP +#line 202 "dtc-lexer.l" +/* eat C-style comments */ + YY_BREAK +case 18: +/* rule 18 can match eol */ +YY_RULE_SETUP +#line 203 "dtc-lexer.l" +/* eat C++-style comments */ + YY_BREAK +case 19: +YY_RULE_SETUP +#line 205 "dtc-lexer.l" +{ + yylloc.file = srcpos_file; + yylloc.first_line = yylineno; + DPRINT("Char: %c (\\x%02x)\n", yytext[0], + (unsigned)yytext[0]); + if (yytext[0] == '[') { + DPRINT("\n"); + BEGIN(BYTESTRING); + } + if ((yytext[0] == '{') + || (yytext[0] == ';')) { + DPRINT("\n"); + BEGIN(PROPNODENAME); + } + return yytext[0]; + } + YY_BREAK +case 20: +YY_RULE_SETUP +#line 222 "dtc-lexer.l" +ECHO; + YY_BREAK +#line 1120 "dtc-lexer.lex.c" + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + int num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + /* just a shorter name for the current buffer */ + YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + + int yy_c_buf_p_offset = + (int) ((yy_c_buf_p) - b->yy_ch_buf); + + if ( b->yy_is_our_buffer ) + { + int new_size = b->yy_buf_size * 2; + + if ( new_size <= 0 ) + b->yy_buf_size += b->yy_buf_size / 8; + else + b->yy_buf_size *= 2; + + b->yy_ch_buf = (char *) + /* Include room in for 2 EOB chars. */ + yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); + } + else + /* Can't grow it, we don't own it. */ + b->yy_ch_buf = 0; + + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( + "fatal error - scanner input buffer overflow" ); + + (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; + + num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - + number_to_move - 1; + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), (size_t) num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + register char *yy_cp = (yy_c_buf_p); + + register YY_CHAR yy_c = 1; + if ( yy_accept[yy_current_state] ) + { + (yy_last_accepting_state) = yy_current_state; + (yy_last_accepting_cpos) = yy_cp; + } + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 104 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 103); + + return yy_is_jam ? 0 : yy_current_state; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + int offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return EOF; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + if ( c == '\n' ) + + yylineno++; +; + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +#ifndef __cplusplus +extern int isatty (int ); +#endif /* __cplusplus */ + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + int num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param bytes the byte buffer to scan + * @param len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + int i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +int yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + /* We do not touch yylineno unless the option is enabled. */ + yylineno = 1; + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 222 "dtc-lexer.l" + + + + +/* + * Stack of nested include file contexts. + */ + +struct incl_file { + struct dtc_file *file; + YY_BUFFER_STATE yy_prev_buf; + int yy_prev_lineno; + struct incl_file *prev; +}; + +static struct incl_file *incl_file_stack; + + +/* + * Detect infinite include recursion. + */ +#define MAX_INCLUDE_DEPTH (100) + +static int incl_depth = 0; + + +static void push_input_file(const char *filename) +{ + struct incl_file *incl_file; + struct dtc_file *newfile; + struct search_path search, *searchptr = NULL; + + assert(filename); + + if (incl_depth++ >= MAX_INCLUDE_DEPTH) + die("Includes nested too deeply"); + + if (srcpos_file) { + search.dir = srcpos_file->dir; + search.next = NULL; + search.prev = NULL; + searchptr = &search; + } + + newfile = dtc_open_file(filename, searchptr); + + incl_file = xmalloc(sizeof(struct incl_file)); + + /* + * Save current context. + */ + incl_file->yy_prev_buf = YY_CURRENT_BUFFER; + incl_file->yy_prev_lineno = yylineno; + incl_file->file = srcpos_file; + incl_file->prev = incl_file_stack; + + incl_file_stack = incl_file; + + /* + * Establish new context. + */ + srcpos_file = newfile; + yylineno = 1; + yyin = newfile->file; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); +} + + +static int pop_input_file(void) +{ + struct incl_file *incl_file; + + if (incl_file_stack == 0) + return 0; + + dtc_close_file(srcpos_file); + + /* + * Pop. + */ + --incl_depth; + incl_file = incl_file_stack; + incl_file_stack = incl_file->prev; + + /* + * Recover old context. + */ + yy_delete_buffer(YY_CURRENT_BUFFER); + yy_switch_to_buffer(incl_file->yy_prev_buf); + yylineno = incl_file->yy_prev_lineno; + srcpos_file = incl_file->file; + yyin = incl_file->file ? incl_file->file->file : NULL; + + /* + * Free old state. + */ + free(incl_file); + + return 1; +} + diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped new file mode 100644 index 000000000000..27129377e5d2 --- /dev/null +++ b/scripts/dtc/dtc-parser.tab.c_shipped @@ -0,0 +1,2040 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* C LALR(1) parser skeleton written by Richard Stallman, by + simplifying the original so-called "semantic" parser. */ + +/* All symbols defined below should begin with yy or YY, to avoid + infringing on user name space. This should be done even for local + variables, as they might otherwise be expanded by user macros. + There are some unavoidable exceptions within include files to + define necessary library symbols; they are noted "INFRINGES ON + USER NAME SPACE" below. */ + +/* Identify Bison output. */ +#define YYBISON 1 + +/* Bison version. */ +#define YYBISON_VERSION "2.3" + +/* Skeleton name. */ +#define YYSKELETON_NAME "yacc.c" + +/* Pure parsers. */ +#define YYPURE 0 + +/* Using locations. */ +#define YYLSP_NEEDED 1 + + + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +/* Copy the first part of user declarations. */ +#line 23 "dtc-parser.y" + +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); + + +/* Enabling traces. */ +#ifndef YYDEBUG +# define YYDEBUG 0 +#endif + +/* Enabling verbose error messages. */ +#ifdef YYERROR_VERBOSE +# undef YYERROR_VERBOSE +# define YYERROR_VERBOSE 1 +#else +# define YYERROR_VERBOSE 0 +#endif + +/* Enabling the token table. */ +#ifndef YYTOKEN_TABLE +# define YYTOKEN_TABLE 0 +#endif + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 187 of yacc.c. */ +#line 153 "dtc-parser.tab.c" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + + +/* Copy the second part of user declarations. */ + + +/* Line 216 of yacc.c. */ +#line 178 "dtc-parser.tab.c" + +#ifdef short +# undef short +#endif + +#ifdef YYTYPE_UINT8 +typedef YYTYPE_UINT8 yytype_uint8; +#else +typedef unsigned char yytype_uint8; +#endif + +#ifdef YYTYPE_INT8 +typedef YYTYPE_INT8 yytype_int8; +#elif (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +typedef signed char yytype_int8; +#else +typedef short int yytype_int8; +#endif + +#ifdef YYTYPE_UINT16 +typedef YYTYPE_UINT16 yytype_uint16; +#else +typedef unsigned short int yytype_uint16; +#endif + +#ifdef YYTYPE_INT16 +typedef YYTYPE_INT16 yytype_int16; +#else +typedef short int yytype_int16; +#endif + +#ifndef YYSIZE_T +# ifdef __SIZE_TYPE__ +# define YYSIZE_T __SIZE_TYPE__ +# elif defined size_t +# define YYSIZE_T size_t +# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# define YYSIZE_T size_t +# else +# define YYSIZE_T unsigned int +# endif +#endif + +#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) + +#ifndef YY_ +# if YYENABLE_NLS +# if ENABLE_NLS +# include /* INFRINGES ON USER NAME SPACE */ +# define YY_(msgid) dgettext ("bison-runtime", msgid) +# endif +# endif +# ifndef YY_ +# define YY_(msgid) msgid +# endif +#endif + +/* Suppress unused-variable warnings by "using" E. */ +#if ! defined lint || defined __GNUC__ +# define YYUSE(e) ((void) (e)) +#else +# define YYUSE(e) /* empty */ +#endif + +/* Identity function, used to suppress warnings about constant conditions. */ +#ifndef lint +# define YYID(n) (n) +#else +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static int +YYID (int i) +#else +static int +YYID (i) + int i; +#endif +{ + return i; +} +#endif + +#if ! defined yyoverflow || YYERROR_VERBOSE + +/* The parser invokes alloca or malloc; define the necessary symbols. */ + +# ifdef YYSTACK_USE_ALLOCA +# if YYSTACK_USE_ALLOCA +# ifdef __GNUC__ +# define YYSTACK_ALLOC __builtin_alloca +# elif defined __BUILTIN_VA_ARG_INCR +# include /* INFRINGES ON USER NAME SPACE */ +# elif defined _AIX +# define YYSTACK_ALLOC __alloca +# elif defined _MSC_VER +# include /* INFRINGES ON USER NAME SPACE */ +# define alloca _alloca +# else +# define YYSTACK_ALLOC alloca +# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# endif +# endif +# endif + +# ifdef YYSTACK_ALLOC + /* Pacify GCC's `empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) +# ifndef YYSTACK_ALLOC_MAXIMUM + /* The OS might guarantee only one guard page at the bottom of the stack, + and a page size can be as small as 4096 bytes. So we cannot safely + invoke alloca (N) if N exceeds 4096. Use a slightly smaller number + to allow for a few compiler-allocated temporary stack slots. */ +# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ +# endif +# else +# define YYSTACK_ALLOC YYMALLOC +# define YYSTACK_FREE YYFREE +# ifndef YYSTACK_ALLOC_MAXIMUM +# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM +# endif +# if (defined __cplusplus && ! defined _STDLIB_H \ + && ! ((defined YYMALLOC || defined malloc) \ + && (defined YYFREE || defined free))) +# include /* INFRINGES ON USER NAME SPACE */ +# ifndef _STDLIB_H +# define _STDLIB_H 1 +# endif +# endif +# ifndef YYMALLOC +# define YYMALLOC malloc +# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# ifndef YYFREE +# define YYFREE free +# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +void free (void *); /* INFRINGES ON USER NAME SPACE */ +# endif +# endif +# endif +#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ + + +#if (! defined yyoverflow \ + && (! defined __cplusplus \ + || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ + && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + +/* A type that is properly aligned for any stack member. */ +union yyalloc +{ + yytype_int16 yyss; + YYSTYPE yyvs; + YYLTYPE yyls; +}; + +/* The size of the maximum gap between one aligned stack and the next. */ +# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) + +/* The size of an array large to enough to hold all stacks, each with + N elements. */ +# define YYSTACK_BYTES(N) \ + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + + 2 * YYSTACK_GAP_MAXIMUM) + +/* Copy COUNT objects from FROM to TO. The source and destination do + not overlap. */ +# ifndef YYCOPY +# if defined __GNUC__ && 1 < __GNUC__ +# define YYCOPY(To, From, Count) \ + __builtin_memcpy (To, From, (Count) * sizeof (*(From))) +# else +# define YYCOPY(To, From, Count) \ + do \ + { \ + YYSIZE_T yyi; \ + for (yyi = 0; yyi < (Count); yyi++) \ + (To)[yyi] = (From)[yyi]; \ + } \ + while (YYID (0)) +# endif +# endif + +/* Relocate STACK from its old location to the new one. The + local variables YYSIZE and YYSTACKSIZE give the old and new number of + elements in the stack, and YYPTR gives the new location of the + stack. Advance YYPTR to a properly aligned location for the next + stack. */ +# define YYSTACK_RELOCATE(Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack, Stack, yysize); \ + Stack = &yyptr->Stack; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (YYID (0)) + +#endif + +/* YYFINAL -- State number of the termination state. */ +#define YYFINAL 9 +/* YYLAST -- Last index in YYTABLE. */ +#define YYLAST 73 + +/* YYNTOKENS -- Number of terminals. */ +#define YYNTOKENS 27 +/* YYNNTS -- Number of nonterminals. */ +#define YYNNTS 20 +/* YYNRULES -- Number of rules. */ +#define YYNRULES 45 +/* YYNRULES -- Number of states. */ +#define YYNSTATES 76 + +/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +#define YYUNDEFTOK 2 +#define YYMAXUTOK 268 + +#define YYTRANSLATE(YYX) \ + ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) + +/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +static const yytype_uint8 yytranslate[] = +{ + 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 24, 26, 2, 2, 25, 15, 2, 16, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 14, + 20, 19, 21, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 22, 2, 23, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 17, 2, 18, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, + 5, 6, 7, 8, 9, 10, 11, 12, 13 +}; + +#if YYDEBUG +/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in + YYRHS. */ +static const yytype_uint8 yyprhs[] = +{ + 0, 0, 3, 8, 11, 12, 15, 21, 22, 25, + 27, 34, 36, 38, 41, 47, 48, 51, 57, 61, + 64, 69, 74, 77, 87, 93, 96, 97, 100, 103, + 104, 107, 110, 113, 114, 116, 118, 121, 122, 125, + 128, 129, 132, 135, 139, 140 +}; + +/* YYRHS -- A `-1'-separated list of the rules' RHS. */ +static const yytype_int8 yyrhs[] = +{ + 28, 0, -1, 3, 14, 29, 34, -1, 31, 34, + -1, -1, 30, 29, -1, 46, 4, 33, 33, 14, + -1, -1, 32, 31, -1, 30, -1, 46, 4, 33, + 15, 33, 14, -1, 6, -1, 7, -1, 16, 35, + -1, 17, 36, 44, 18, 14, -1, -1, 36, 37, + -1, 46, 5, 19, 38, 14, -1, 46, 5, 14, + -1, 39, 10, -1, 39, 20, 40, 21, -1, 39, + 22, 43, 23, -1, 39, 12, -1, 39, 13, 24, + 10, 25, 33, 25, 33, 26, -1, 39, 13, 24, + 10, 26, -1, 38, 11, -1, -1, 38, 25, -1, + 39, 11, -1, -1, 40, 42, -1, 40, 12, -1, + 40, 11, -1, -1, 8, -1, 6, -1, 41, 7, + -1, -1, 43, 9, -1, 43, 11, -1, -1, 45, + 44, -1, 45, 37, -1, 46, 5, 35, -1, -1, + 11, -1 +}; + +/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ +static const yytype_uint16 yyrline[] = +{ + 0, 89, 89, 93, 101, 104, 111, 119, 122, 129, + 133, 140, 144, 151, 158, 166, 169, 176, 180, 187, + 191, 195, 199, 203, 220, 231, 239, 242, 246, 254, + 257, 261, 266, 274, 277, 281, 285, 293, 296, 300, + 308, 311, 315, 323, 331, 334 +}; +#endif + +#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE +/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. + First, the terminals, then, starting at YYNTOKENS, nonterminals. */ +static const char *const yytname[] = +{ + "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", + "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE", + "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'", + "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','", + "')'", "$accept", "sourcefile", "memreserves", "memreserve", + "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef", + "proplist", "propdef", "propdata", "propdataprefix", "celllist", + "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0 +}; +#endif + +# ifdef YYPRINT +/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to + token YYLEX-NUM. */ +static const yytype_uint16 yytoknum[] = +{ + 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, + 265, 266, 267, 268, 59, 45, 47, 123, 125, 61, + 60, 62, 91, 93, 40, 44, 41 +}; +# endif + +/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = +{ + 0, 27, 28, 28, 29, 29, 30, 31, 31, 32, + 32, 33, 33, 34, 35, 36, 36, 37, 37, 38, + 38, 38, 38, 38, 38, 38, 39, 39, 39, 40, + 40, 40, 40, 41, 41, 42, 42, 43, 43, 43, + 44, 44, 44, 45, 46, 46 +}; + +/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = +{ + 0, 2, 4, 2, 0, 2, 5, 0, 2, 1, + 6, 1, 1, 2, 5, 0, 2, 5, 3, 2, + 4, 4, 2, 9, 5, 2, 0, 2, 2, 0, + 2, 2, 2, 0, 1, 1, 2, 0, 2, 2, + 0, 2, 2, 3, 0, 1 +}; + +/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state + STATE-NUM when YYTABLE doesn't specify something else to do. Zero + means the default is an error. */ +static const yytype_uint8 yydefact[] = +{ + 7, 0, 45, 0, 9, 0, 7, 0, 4, 1, + 0, 3, 8, 0, 0, 4, 0, 15, 13, 11, + 12, 0, 2, 5, 0, 40, 0, 0, 0, 16, + 0, 40, 0, 0, 6, 0, 42, 41, 0, 10, + 14, 18, 26, 43, 0, 0, 25, 17, 27, 19, + 28, 22, 0, 29, 37, 0, 33, 0, 0, 35, + 34, 32, 31, 20, 0, 30, 38, 39, 21, 0, + 24, 36, 0, 0, 0, 23 +}; + +/* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int8 yydefgoto[] = +{ + -1, 3, 14, 4, 5, 6, 27, 11, 18, 25, + 29, 44, 45, 56, 64, 65, 57, 30, 31, 7 +}; + +/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +#define YYPACT_NINF -14 +static const yytype_int8 yypact[] = +{ + 30, -11, -14, 7, -14, -1, 27, 13, 27, -14, + 8, -14, -14, 40, -1, 27, 35, -14, -14, -14, + -14, 21, -14, -14, 40, 24, 40, 28, 40, -14, + 32, 24, 46, 38, -14, 39, -14, -14, 26, -14, + -14, -14, -14, -14, -9, 10, -14, -14, -14, -14, + -14, -14, 31, -14, -14, 44, -2, 3, 23, -14, + -14, -14, -14, -14, 50, -14, -14, -14, -14, 40, + -14, -14, 33, 40, 36, -14 +}; + +/* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = +{ + -14, -14, 48, 29, 53, -14, -13, 47, 34, -14, + 37, -14, -14, -14, -14, -14, -14, 42, -14, -7 +}; + +/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule which + number is the opposite. If zero, do what YYDEFACT says. + If YYTABLE_NINF, syntax error. */ +#define YYTABLE_NINF -45 +static const yytype_int8 yytable[] = +{ + 21, 16, 46, 8, 59, 47, 60, 9, 16, 61, + 62, 28, 66, 33, 67, 10, 48, 13, 32, 63, + 49, 50, 51, 52, 32, 17, 68, 19, 20, -44, + 53, -44, 54, 1, -44, 2, 26, 15, 2, 24, + 41, 2, 34, 17, 15, 42, 19, 20, 69, 70, + 35, 38, 39, 40, 58, 55, 72, 71, 73, 12, + 74, 22, 75, 23, 0, 0, 0, 0, 36, 0, + 0, 0, 43, 37 +}; + +static const yytype_int8 yycheck[] = +{ + 13, 8, 11, 14, 6, 14, 8, 0, 15, 11, + 12, 24, 9, 26, 11, 16, 25, 4, 25, 21, + 10, 11, 12, 13, 31, 17, 23, 6, 7, 5, + 20, 4, 22, 3, 4, 11, 15, 8, 11, 4, + 14, 11, 14, 17, 15, 19, 6, 7, 25, 26, + 18, 5, 14, 14, 10, 24, 69, 7, 25, 6, + 73, 14, 26, 15, -1, -1, -1, -1, 31, -1, + -1, -1, 38, 31 +}; + +/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 11, 28, 30, 31, 32, 46, 14, 0, + 16, 34, 31, 4, 29, 30, 46, 17, 35, 6, + 7, 33, 34, 29, 4, 36, 15, 33, 33, 37, + 44, 45, 46, 33, 14, 18, 37, 44, 5, 14, + 14, 14, 19, 35, 38, 39, 11, 14, 25, 10, + 11, 12, 13, 20, 22, 24, 40, 43, 10, 6, + 8, 11, 12, 21, 41, 42, 9, 11, 23, 25, + 26, 7, 33, 25, 33, 26 +}; + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + + +/* Like YYERROR except do call yyerror. This remains here temporarily + to ease the transition to the new meaning of YYERROR, for GCC. + Once GCC version 2 has supplanted version 1, this can go. */ + +#define YYFAIL goto yyerrlab + +#define YYRECOVERING() (!!yyerrstatus) + +#define YYBACKUP(Token, Value) \ +do \ + if (yychar == YYEMPTY && yylen == 1) \ + { \ + yychar = (Token); \ + yylval = (Value); \ + yytoken = YYTRANSLATE (yychar); \ + YYPOPSTACK (1); \ + goto yybackup; \ + } \ + else \ + { \ + yyerror (YY_("syntax error: cannot back up")); \ + YYERROR; \ + } \ +while (YYID (0)) + + +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (YYID (0)) +#endif + + +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ + +#ifndef YY_LOCATION_PRINT +# if YYLTYPE_IS_TRIVIAL +# define YY_LOCATION_PRINT(File, Loc) \ + fprintf (File, "%d.%d-%d.%d", \ + (Loc).first_line, (Loc).first_column, \ + (Loc).last_line, (Loc).last_column) +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif +#endif + + +/* YYLEX -- calling `yylex' with the right arguments. */ + +#ifdef YYLEX_PARAM +# define YYLEX yylex (YYLEX_PARAM) +#else +# define YYLEX yylex () +#endif + +/* Enable debugging if requested. */ +#if YYDEBUG + +# ifndef YYFPRINTF +# include /* INFRINGES ON USER NAME SPACE */ +# define YYFPRINTF fprintf +# endif + +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (YYID (0)) + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value, Location); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (YYID (0)) + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (!yyvaluep) + return; + YYUSE (yylocationp); +# ifdef YYPRINT + if (yytype < YYNTOKENS) + YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); +# else + YYUSE (yyoutput); +# endif + switch (yytype) + { + default: + break; + } +} + + +/*--------------------------------. +| Print this symbol on YYOUTPUT. | +`--------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) +#else +static void +yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp) + FILE *yyoutput; + int yytype; + YYSTYPE const * const yyvaluep; + YYLTYPE const * const yylocationp; +#endif +{ + if (yytype < YYNTOKENS) + YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); + else + YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + + YY_LOCATION_PRINT (yyoutput, *yylocationp); + YYFPRINTF (yyoutput, ": "); + yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); + YYFPRINTF (yyoutput, ")"); +} + +/*------------------------------------------------------------------. +| yy_stack_print -- Print the state stack from its BOTTOM up to its | +| TOP (included). | +`------------------------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +#else +static void +yy_stack_print (bottom, top) + yytype_int16 *bottom; + yytype_int16 *top; +#endif +{ + YYFPRINTF (stderr, "Stack now"); + for (; bottom <= top; ++bottom) + YYFPRINTF (stderr, " %d", *bottom); + YYFPRINTF (stderr, "\n"); +} + +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (YYID (0)) + + +/*------------------------------------------------. +| Report that the YYRULE is going to be reduced. | +`------------------------------------------------*/ + +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) +#else +static void +yy_reduce_print (yyvsp, yylsp, yyrule) + YYSTYPE *yyvsp; + YYLTYPE *yylsp; + int yyrule; +#endif +{ + int yynrhs = yyr2[yyrule]; + int yyi; + unsigned long int yylno = yyrline[yyrule]; + YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", + yyrule - 1, yylno); + /* The symbols being reduced. */ + for (yyi = 0; yyi < yynrhs; yyi++) + { + fprintf (stderr, " $%d = ", yyi + 1); + yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], + &(yyvsp[(yyi + 1) - (yynrhs)]) + , &(yylsp[(yyi + 1) - (yynrhs)]) ); + fprintf (stderr, "\n"); + } +} + +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyvsp, yylsp, Rule); \ +} while (YYID (0)) + +/* Nonzero means print parse trace. It is left uninitialized so that + multiple parsers can coexist. */ +int yydebug; +#else /* !YYDEBUG */ +# define YYDPRINTF(Args) +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) +# define YY_STACK_PRINT(Bottom, Top) +# define YY_REDUCE_PRINT(Rule) +#endif /* !YYDEBUG */ + + +/* YYINITDEPTH -- initial size of the parser's stacks. */ +#ifndef YYINITDEPTH +# define YYINITDEPTH 200 +#endif + +/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only + if the built-in stack extension method is used). + + Do not make this value too large; the results are undefined if + YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) + evaluated with infinite-precision integer arithmetic. */ + +#ifndef YYMAXDEPTH +# define YYMAXDEPTH 10000 +#endif + + + +#if YYERROR_VERBOSE + +# ifndef yystrlen +# if defined __GLIBC__ && defined _STRING_H +# define yystrlen strlen +# else +/* Return the length of YYSTR. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static YYSIZE_T +yystrlen (const char *yystr) +#else +static YYSIZE_T +yystrlen (yystr) + const char *yystr; +#endif +{ + YYSIZE_T yylen; + for (yylen = 0; yystr[yylen]; yylen++) + continue; + return yylen; +} +# endif +# endif + +# ifndef yystpcpy +# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE +# define yystpcpy stpcpy +# else +/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in + YYDEST. */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static char * +yystpcpy (char *yydest, const char *yysrc) +#else +static char * +yystpcpy (yydest, yysrc) + char *yydest; + const char *yysrc; +#endif +{ + char *yyd = yydest; + const char *yys = yysrc; + + while ((*yyd++ = *yys++) != '\0') + continue; + + return yyd - 1; +} +# endif +# endif + +# ifndef yytnamerr +/* Copy to YYRES the contents of YYSTR after stripping away unnecessary + quotes and backslashes, so that it's suitable for yyerror. The + heuristic is that double-quoting is unnecessary unless the string + contains an apostrophe, a comma, or backslash (other than + backslash-backslash). YYSTR is taken from yytname. If YYRES is + null, do not copy; instead, return the length of what the result + would have been. */ +static YYSIZE_T +yytnamerr (char *yyres, const char *yystr) +{ + if (*yystr == '"') + { + YYSIZE_T yyn = 0; + char const *yyp = yystr; + + for (;;) + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } + do_not_strip_quotes: ; + } + + if (! yyres) + return yystrlen (yystr); + + return yystpcpy (yyres, yystr) - yyres; +} +# endif + +/* Copy into YYRESULT an error message about the unexpected token + YYCHAR while in state YYSTATE. Return the number of bytes copied, + including the terminating null byte. If YYRESULT is null, do not + copy anything; just return the number of bytes that would be + copied. As a special case, return 0 if an ordinary "syntax error" + message will do. Return YYSIZE_MAXIMUM if overflow occurs during + size calculation. */ +static YYSIZE_T +yysyntax_error (char *yyresult, int yystate, int yychar) +{ + int yyn = yypact[yystate]; + + if (! (YYPACT_NINF < yyn && yyn <= YYLAST)) + return 0; + else + { + int yytype = YYTRANSLATE (yychar); + YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]); + YYSIZE_T yysize = yysize0; + YYSIZE_T yysize1; + int yysize_overflow = 0; + enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; + char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; + int yyx; + +# if 0 + /* This is so xgettext sees the translatable formats that are + constructed on the fly. */ + YY_("syntax error, unexpected %s"); + YY_("syntax error, unexpected %s, expecting %s"); + YY_("syntax error, unexpected %s, expecting %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s"); + YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s"); +# endif + char *yyfmt; + char const *yyf; + static char const yyunexpected[] = "syntax error, unexpected %s"; + static char const yyexpecting[] = ", expecting %s"; + static char const yyor[] = " or %s"; + char yyformat[sizeof yyunexpected + + sizeof yyexpecting - 1 + + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2) + * (sizeof yyor - 1))]; + char const *yyprefix = yyexpecting; + + /* Start YYX at -YYN if negative to avoid negative indexes in + YYCHECK. */ + int yyxbegin = yyn < 0 ? -yyn : 0; + + /* Stay within bounds of both yycheck and yytname. */ + int yychecklim = YYLAST - yyn + 1; + int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; + int yycount = 1; + + yyarg[0] = yytname[yytype]; + yyfmt = yystpcpy (yyformat, yyunexpected); + + for (yyx = yyxbegin; yyx < yyxend; ++yyx) + if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR) + { + if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) + { + yycount = 1; + yysize = yysize0; + yyformat[sizeof yyunexpected - 1] = '\0'; + break; + } + yyarg[yycount++] = yytname[yyx]; + yysize1 = yysize + yytnamerr (0, yytname[yyx]); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + yyfmt = yystpcpy (yyfmt, yyprefix); + yyprefix = yyor; + } + + yyf = YY_(yyformat); + yysize1 = yysize + yystrlen (yyf); + yysize_overflow |= (yysize1 < yysize); + yysize = yysize1; + + if (yysize_overflow) + return YYSIZE_MAXIMUM; + + if (yyresult) + { + /* Avoid sprintf, as that infringes on the user's name space. + Don't have undefined behavior even if the translation + produced a string with the wrong number of "%s"s. */ + char *yyp = yyresult; + int yyi = 0; + while ((*yyp = *yyf) != '\0') + { + if (*yyp == '%' && yyf[1] == 's' && yyi < yycount) + { + yyp += yytnamerr (yyp, yyarg[yyi++]); + yyf += 2; + } + else + { + yyp++; + yyf++; + } + } + } + return yysize; + } +} +#endif /* YYERROR_VERBOSE */ + + +/*-----------------------------------------------. +| Release the memory associated to this symbol. | +`-----------------------------------------------*/ + +/*ARGSUSED*/ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +static void +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) +#else +static void +yydestruct (yymsg, yytype, yyvaluep, yylocationp) + const char *yymsg; + int yytype; + YYSTYPE *yyvaluep; + YYLTYPE *yylocationp; +#endif +{ + YYUSE (yyvaluep); + YYUSE (yylocationp); + + if (!yymsg) + yymsg = "Deleting"; + YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + + switch (yytype) + { + + default: + break; + } +} + + +/* Prevent warnings from -Wmissing-prototypes. */ + +#ifdef YYPARSE_PARAM +#if defined __STDC__ || defined __cplusplus +int yyparse (void *YYPARSE_PARAM); +#else +int yyparse (); +#endif +#else /* ! YYPARSE_PARAM */ +#if defined __STDC__ || defined __cplusplus +int yyparse (void); +#else +int yyparse (); +#endif +#endif /* ! YYPARSE_PARAM */ + + + +/* The look-ahead symbol. */ +int yychar; + +/* The semantic value of the look-ahead symbol. */ +YYSTYPE yylval; + +/* Number of syntax errors so far. */ +int yynerrs; +/* Location data for the look-ahead symbol. */ +YYLTYPE yylloc; + + + +/*----------. +| yyparse. | +`----------*/ + +#ifdef YYPARSE_PARAM +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void *YYPARSE_PARAM) +#else +int +yyparse (YYPARSE_PARAM) + void *YYPARSE_PARAM; +#endif +#else /* ! YYPARSE_PARAM */ +#if (defined __STDC__ || defined __C99__FUNC__ \ + || defined __cplusplus || defined _MSC_VER) +int +yyparse (void) +#else +int +yyparse () + +#endif +#endif +{ + + int yystate; + int yyn; + int yyresult; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; + /* Look-ahead token as an internal (translated) token number. */ + int yytoken = 0; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + + /* Three stacks and their tools: + `yyss': related to states, + `yyvs': related to semantic values, + `yyls': related to locations. + + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss = yyssa; + yytype_int16 *yyssp; + + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs = yyvsa; + YYSTYPE *yyvsp; + + /* The location stack. */ + YYLTYPE yylsa[YYINITDEPTH]; + YYLTYPE *yyls = yylsa; + YYLTYPE *yylsp; + /* The locations where the error started and ended. */ + YYLTYPE yyerror_range[2]; + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) + + YYSIZE_T yystacksize = YYINITDEPTH; + + /* The variables used to return semantic value and location from the + action routines. */ + YYSTYPE yyval; + YYLTYPE yyloc; + + /* The number of symbols on the RHS of the reduced rule. + Keep to zero when no symbol should be popped. */ + int yylen = 0; + + YYDPRINTF ((stderr, "Starting parse\n")); + + yystate = 0; + yyerrstatus = 0; + yynerrs = 0; + yychar = YYEMPTY; /* Cause a token to be read. */ + + /* Initialize stack pointers. + Waste one element of value and location stack + so that they stay on the same level as the state stack. + The wasted elements are never initialized. */ + + yyssp = yyss; + yyvsp = yyvs; + yylsp = yyls; +#if YYLTYPE_IS_TRIVIAL + /* Initialize the default location before parsing starts. */ + yylloc.first_line = yylloc.last_line = 1; + yylloc.first_column = yylloc.last_column = 0; +#endif + + goto yysetstate; + +/*------------------------------------------------------------. +| yynewstate -- Push a new state, which is found in yystate. | +`------------------------------------------------------------*/ + yynewstate: + /* In all cases, when you get here, the value and location stacks + have just been pushed. So pushing a state here evens the stacks. */ + yyssp++; + + yysetstate: + *yyssp = yystate; + + if (yyss + yystacksize - 1 <= yyssp) + { + /* Get the current used size of the three stacks, in elements. */ + YYSIZE_T yysize = yyssp - yyss + 1; + +#ifdef yyoverflow + { + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + YYLTYPE *yyls1 = yyls; + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + &yyls1, yysize * sizeof (*yylsp), + &yystacksize); + yyls = yyls1; + yyss = yyss1; + yyvs = yyvs1; + } +#else /* no yyoverflow */ +# ifndef YYSTACK_RELOCATE + goto yyexhaustedlab; +# else + /* Extend the stack our own way. */ + if (YYMAXDEPTH <= yystacksize) + goto yyexhaustedlab; + yystacksize *= 2; + if (YYMAXDEPTH < yystacksize) + yystacksize = YYMAXDEPTH; + + { + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss); + YYSTACK_RELOCATE (yyvs); + YYSTACK_RELOCATE (yyls); +# undef YYSTACK_RELOCATE + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); + } +# endif +#endif /* no yyoverflow */ + + yyssp = yyss + yysize - 1; + yyvsp = yyvs + yysize - 1; + yylsp = yyls + yysize - 1; + + YYDPRINTF ((stderr, "Stack size increased to %lu\n", + (unsigned long int) yystacksize)); + + if (yyss + yystacksize - 1 <= yyssp) + YYABORT; + } + + YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + + goto yybackup; + +/*-----------. +| yybackup. | +`-----------*/ +yybackup: + + /* Do appropriate processing given the current state. Read a + look-ahead token if we need one and don't already have one. */ + + /* First try to decide what to do without reference to look-ahead token. */ + yyn = yypact[yystate]; + if (yyn == YYPACT_NINF) + goto yydefault; + + /* Not known => get a look-ahead token if don't already have one. */ + + /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + if (yychar == YYEMPTY) + { + YYDPRINTF ((stderr, "Reading a token: ")); + yychar = YYLEX; + } + + if (yychar <= YYEOF) + { + yychar = yytoken = YYEOF; + YYDPRINTF ((stderr, "Now at end of input.\n")); + } + else + { + yytoken = YYTRANSLATE (yychar); + YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); + } + + /* If the proper action on seeing token YYTOKEN is to reduce or to + detect an error, take that action. */ + yyn += yytoken; + if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) + goto yydefault; + yyn = yytable[yyn]; + if (yyn <= 0) + { + if (yyn == 0 || yyn == YYTABLE_NINF) + goto yyerrlab; + yyn = -yyn; + goto yyreduce; + } + + if (yyn == YYFINAL) + YYACCEPT; + + /* Count tokens shifted since error; after three, turn off error + status. */ + if (yyerrstatus) + yyerrstatus--; + + /* Shift the look-ahead token. */ + YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); + + /* Discard the shifted token unless it is eof. */ + if (yychar != YYEOF) + yychar = YYEMPTY; + + yystate = yyn; + *++yyvsp = yylval; + *++yylsp = yylloc; + goto yynewstate; + + +/*-----------------------------------------------------------. +| yydefault -- do the default action for the current state. | +`-----------------------------------------------------------*/ +yydefault: + yyn = yydefact[yystate]; + if (yyn == 0) + goto yyerrlab; + goto yyreduce; + + +/*-----------------------------. +| yyreduce -- Do a reduction. | +`-----------------------------*/ +yyreduce: + /* yyn is the number of a rule to reduce with. */ + yylen = yyr2[yyn]; + + /* If YYLEN is nonzero, implement the default value of the action: + `$$ = $1'. + + Otherwise, the following line sets YYVAL to garbage. + This behavior is undocumented and Bison + users should not rely upon it. Assigning to YYVAL + unconditionally makes the parser a bit smaller, and it avoids a + GCC warning that YYVAL may be used uninitialized. */ + yyval = yyvsp[1-yylen]; + + /* Default location. */ + YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); + YY_REDUCE_PRINT (yyn); + switch (yyn) + { + case 2: +#line 90 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0); + ;} + break; + + case 3: +#line 94 "dtc-parser.y" + { + the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0); + ;} + break; + + case 4: +#line 101 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 5: +#line 105 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 6: +#line 112 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 7: +#line 119 "dtc-parser.y" + { + (yyval.re) = NULL; + ;} + break; + + case 8: +#line 123 "dtc-parser.y" + { + (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + ;} + break; + + case 9: +#line 130 "dtc-parser.y" + { + (yyval.re) = (yyvsp[(1) - (1)].re); + ;} + break; + + case 10: +#line 134 "dtc-parser.y" + { + (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref)); + ;} + break; + + case 11: +#line 141 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); + ;} + break; + + case 12: +#line 145 "dtc-parser.y" + { + (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64); + ;} + break; + + case 13: +#line 152 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL); + ;} + break; + + case 14: +#line 159 "dtc-parser.y" + { + (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); + ;} + break; + + case 15: +#line 166 "dtc-parser.y" + { + (yyval.proplist) = NULL; + ;} + break; + + case 16: +#line 170 "dtc-parser.y" + { + (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); + ;} + break; + + case 17: +#line 177 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref)); + ;} + break; + + case 18: +#line 181 "dtc-parser.y" + { + (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 19: +#line 188 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); + ;} + break; + + case 20: +#line 192 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 21: +#line 196 "dtc-parser.y" + { + (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + ;} + break; + + case 22: +#line 200 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 23: +#line 204 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path); + struct data d = empty_data; + + if ((yyvsp[(6) - (9)].addr) != 0) + if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)(yyvsp[(6) - (9)].addr), + (yyvsp[(4) - (9)].data).val, strerror(errno)); + + d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr)); + + (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); + dtc_close_file(file); + ;} + break; + + case 24: +#line 221 "dtc-parser.y" + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); + dtc_close_file(file); + ;} + break; + + case 25: +#line 232 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 26: +#line 239 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 27: +#line 243 "dtc-parser.y" + { + (yyval.data) = (yyvsp[(1) - (2)].data); + ;} + break; + + case 28: +#line 247 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 29: +#line 254 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 30: +#line 258 "dtc-parser.y" + { + (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell)); + ;} + break; + + case 31: +#line 262 "dtc-parser.y" + { + (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE, + (yyvsp[(2) - (2)].labelref)), -1); + ;} + break; + + case 32: +#line 267 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 33: +#line 274 "dtc-parser.y" + { + (yyval.cbase) = 16; + ;} + break; + + case 35: +#line 282 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32); + ;} + break; + + case 36: +#line 286 "dtc-parser.y" + { + (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32); + ;} + break; + + case 37: +#line 293 "dtc-parser.y" + { + (yyval.data) = empty_data; + ;} + break; + + case 38: +#line 297 "dtc-parser.y" + { + (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); + ;} + break; + + case 39: +#line 301 "dtc-parser.y" + { + (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + ;} + break; + + case 40: +#line 308 "dtc-parser.y" + { + (yyval.nodelist) = NULL; + ;} + break; + + case 41: +#line 312 "dtc-parser.y" + { + (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); + ;} + break; + + case 42: +#line 316 "dtc-parser.y" + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + ;} + break; + + case 43: +#line 324 "dtc-parser.y" + { + (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref)); + ;} + break; + + case 44: +#line 331 "dtc-parser.y" + { + (yyval.labelref) = NULL; + ;} + break; + + case 45: +#line 335 "dtc-parser.y" + { + (yyval.labelref) = (yyvsp[(1) - (1)].labelref); + ;} + break; + + +/* Line 1267 of yacc.c. */ +#line 1780 "dtc-parser.tab.c" + default: break; + } + YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); + + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + + *++yyvsp = yyval; + *++yylsp = yyloc; + + /* Now `shift' the result of the reduction. Determine what state + that goes to, based on the state we popped back to and the rule + number reduced by. */ + + yyn = yyr1[yyn]; + + yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; + if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) + yystate = yytable[yystate]; + else + yystate = yydefgoto[yyn - YYNTOKENS]; + + goto yynewstate; + + +/*------------------------------------. +| yyerrlab -- here on detecting error | +`------------------------------------*/ +yyerrlab: + /* If not already recovering from an error, report this error. */ + if (!yyerrstatus) + { + ++yynerrs; +#if ! YYERROR_VERBOSE + yyerror (YY_("syntax error")); +#else + { + YYSIZE_T yysize = yysyntax_error (0, yystate, yychar); + if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM) + { + YYSIZE_T yyalloc = 2 * yysize; + if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM)) + yyalloc = YYSTACK_ALLOC_MAXIMUM; + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); + yymsg = (char *) YYSTACK_ALLOC (yyalloc); + if (yymsg) + yymsg_alloc = yyalloc; + else + { + yymsg = yymsgbuf; + yymsg_alloc = sizeof yymsgbuf; + } + } + + if (0 < yysize && yysize <= yymsg_alloc) + { + (void) yysyntax_error (yymsg, yystate, yychar); + yyerror (yymsg); + } + else + { + yyerror (YY_("syntax error")); + if (yysize != 0) + goto yyexhaustedlab; + } + } +#endif + } + + yyerror_range[0] = yylloc; + + if (yyerrstatus == 3) + { + /* If just tried and failed to reuse look-ahead token after an + error, discard it. */ + + if (yychar <= YYEOF) + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } + else + { + yydestruct ("Error: discarding", + yytoken, &yylval, &yylloc); + yychar = YYEMPTY; + } + } + + /* Else will try to reuse look-ahead token after shifting the error + token. */ + goto yyerrlab1; + + +/*---------------------------------------------------. +| yyerrorlab -- error raised explicitly by YYERROR. | +`---------------------------------------------------*/ +yyerrorlab: + + /* Pacify compilers like GCC when the user code never invokes + YYERROR and the label yyerrorlab therefore never appears in user + code. */ + if (/*CONSTCOND*/ 0) + goto yyerrorlab; + + yyerror_range[0] = yylsp[1-yylen]; + /* Do not reclaim the symbols of the rule which action triggered + this YYERROR. */ + YYPOPSTACK (yylen); + yylen = 0; + YY_STACK_PRINT (yyss, yyssp); + yystate = *yyssp; + goto yyerrlab1; + + +/*-------------------------------------------------------------. +| yyerrlab1 -- common code for both syntax error and YYERROR. | +`-------------------------------------------------------------*/ +yyerrlab1: + yyerrstatus = 3; /* Each real token shifted decrements this. */ + + for (;;) + { + yyn = yypact[yystate]; + if (yyn != YYPACT_NINF) + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } + + /* Pop the current state because it cannot handle the error token. */ + if (yyssp == yyss) + YYABORT; + + yyerror_range[0] = *yylsp; + yydestruct ("Error: popping", + yystos[yystate], yyvsp, yylsp); + YYPOPSTACK (1); + yystate = *yyssp; + YY_STACK_PRINT (yyss, yyssp); + } + + if (yyn == YYFINAL) + YYACCEPT; + + *++yyvsp = yylval; + + yyerror_range[1] = yylloc; + /* Using YYLLOC is tempting, but would change the location of + the look-ahead. YYLOC is available though. */ + YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2); + *++yylsp = yyloc; + + /* Shift the error token. */ + YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); + + yystate = yyn; + goto yynewstate; + + +/*-------------------------------------. +| yyacceptlab -- YYACCEPT comes here. | +`-------------------------------------*/ +yyacceptlab: + yyresult = 0; + goto yyreturn; + +/*-----------------------------------. +| yyabortlab -- YYABORT comes here. | +`-----------------------------------*/ +yyabortlab: + yyresult = 1; + goto yyreturn; + +#ifndef yyoverflow +/*-------------------------------------------------. +| yyexhaustedlab -- memory exhaustion comes here. | +`-------------------------------------------------*/ +yyexhaustedlab: + yyerror (YY_("memory exhausted")); + yyresult = 2; + /* Fall through. */ +#endif + +yyreturn: + if (yychar != YYEOF && yychar != YYEMPTY) + yydestruct ("Cleanup: discarding lookahead", + yytoken, &yylval, &yylloc); + /* Do not reclaim the symbols of the rule which action triggered + this YYABORT or YYACCEPT. */ + YYPOPSTACK (yylen); + YY_STACK_PRINT (yyss, yyssp); + while (yyssp != yyss) + { + yydestruct ("Cleanup: popping", + yystos[*yyssp], yyvsp, yylsp); + YYPOPSTACK (1); + } +#ifndef yyoverflow + if (yyss != yyssa) + YYSTACK_FREE (yyss); +#endif +#if YYERROR_VERBOSE + if (yymsg != yymsgbuf) + YYSTACK_FREE (yymsg); +#endif + /* Make sure YYID is used. */ + return YYID (yyresult); +} + + +#line 340 "dtc-parser.y" + + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} + diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped new file mode 100644 index 000000000000..ba99100d55c9 --- /dev/null +++ b/scripts/dtc/dtc-parser.tab.h_shipped @@ -0,0 +1,113 @@ +/* A Bison parser, made by GNU Bison 2.3. */ + +/* Skeleton interface for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 + Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +/* As a special exception, you may create a larger work that contains + part or all of the Bison parser skeleton and distribute that work + under terms of your choice, so long as that work isn't itself a + parser generator using the skeleton or a modified version thereof + as a parser skeleton. Alternatively, if you modify or redistribute + the parser skeleton itself, you may (at your option) remove this + special exception, which will cause the skeleton and the resulting + Bison output files to be licensed under the GNU General Public + License without this special exception. + + This special exception was added by the Free Software Foundation in + version 2.2 of Bison. */ + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + DT_V1 = 258, + DT_MEMRESERVE = 259, + DT_PROPNODENAME = 260, + DT_LITERAL = 261, + DT_LEGACYLITERAL = 262, + DT_BASE = 263, + DT_BYTE = 264, + DT_STRING = 265, + DT_LABEL = 266, + DT_REF = 267, + DT_INCBIN = 268 + }; +#endif +/* Tokens. */ +#define DT_V1 258 +#define DT_MEMRESERVE 259 +#define DT_PROPNODENAME 260 +#define DT_LITERAL 261 +#define DT_LEGACYLITERAL 262 +#define DT_BASE 263 +#define DT_BYTE 264 +#define DT_STRING 265 +#define DT_LABEL 266 +#define DT_REF 267 +#define DT_INCBIN 268 + + + + +#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED +typedef union YYSTYPE +#line 37 "dtc-parser.y" +{ + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} +/* Line 1489 of yacc.c. */ +#line 92 "dtc-parser.tab.h" + YYSTYPE; +# define yystype YYSTYPE /* obsolescent; will be withdrawn */ +# define YYSTYPE_IS_DECLARED 1 +# define YYSTYPE_IS_TRIVIAL 1 +#endif + +extern YYSTYPE yylval; + +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +} YYLTYPE; +# define yyltype YYLTYPE /* obsolescent; will be withdrawn */ +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 +#endif + +extern YYLTYPE yylloc; diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y new file mode 100644 index 000000000000..b2ab562420ea --- /dev/null +++ b/scripts/dtc/dtc-parser.y @@ -0,0 +1,379 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +%locations + +%{ +#include + +#include "dtc.h" +#include "srcpos.h" + +extern int yylex(void); + +extern struct boot_info *the_boot_info; +extern int treesource_error; + +static unsigned long long eval_literal(const char *s, int base, int bits); +%} + +%union { + char *propnodename; + char *literal; + char *labelref; + unsigned int cbase; + uint8_t byte; + struct data data; + + uint64_t addr; + cell_t cell; + struct property *prop; + struct property *proplist; + struct node *node; + struct node *nodelist; + struct reserve_info *re; +} + +%token DT_V1 +%token DT_MEMRESERVE +%token DT_PROPNODENAME +%token DT_LITERAL +%token DT_LEGACYLITERAL +%token DT_BASE +%token DT_BYTE +%token DT_STRING +%token DT_LABEL +%token DT_REF +%token DT_INCBIN + +%type propdata +%type propdataprefix +%type memreserve +%type memreserves +%type v0_memreserve +%type v0_memreserves +%type addr +%type celllist +%type cellbase +%type cellval +%type bytestring +%type propdef +%type proplist + +%type devicetree +%type nodedef +%type subnode +%type subnodes +%type label + +%% + +sourcefile: + DT_V1 ';' memreserves devicetree + { + the_boot_info = build_boot_info($3, $4, 0); + } + | v0_memreserves devicetree + { + the_boot_info = build_boot_info($1, $2, 0); + } + ; + +memreserves: + /* empty */ + { + $$ = NULL; + } + | memreserve memreserves + { + $$ = chain_reserve_entry($1, $2); + } + ; + +memreserve: + label DT_MEMRESERVE addr addr ';' + { + $$ = build_reserve_entry($3, $4, $1); + } + ; + +v0_memreserves: + /* empty */ + { + $$ = NULL; + } + | v0_memreserve v0_memreserves + { + $$ = chain_reserve_entry($1, $2); + }; + ; + +v0_memreserve: + memreserve + { + $$ = $1; + } + | label DT_MEMRESERVE addr '-' addr ';' + { + $$ = build_reserve_entry($3, $5 - $3 + 1, $1); + } + ; + +addr: + DT_LITERAL + { + $$ = eval_literal($1, 0, 64); + } + | DT_LEGACYLITERAL + { + $$ = eval_literal($1, 16, 64); + } + ; + +devicetree: + '/' nodedef + { + $$ = name_node($2, "", NULL); + } + ; + +nodedef: + '{' proplist subnodes '}' ';' + { + $$ = build_node($2, $3); + } + ; + +proplist: + /* empty */ + { + $$ = NULL; + } + | proplist propdef + { + $$ = chain_property($2, $1); + } + ; + +propdef: + label DT_PROPNODENAME '=' propdata ';' + { + $$ = build_property($2, $4, $1); + } + | label DT_PROPNODENAME ';' + { + $$ = build_property($2, empty_data, $1); + } + ; + +propdata: + propdataprefix DT_STRING + { + $$ = data_merge($1, $2); + } + | propdataprefix '<' celllist '>' + { + $$ = data_merge($1, $3); + } + | propdataprefix '[' bytestring ']' + { + $$ = data_merge($1, $3); + } + | propdataprefix DT_REF + { + $$ = data_add_marker($1, REF_PATH, $2); + } + | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + if ($6 != 0) + if (fseek(file->file, $6, SEEK_SET) != 0) + yyerrorf("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)$6, + $4.val, strerror(errno)); + + d = data_copy_file(file->file, $8); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdataprefix DT_INCBIN '(' DT_STRING ')' + { + struct search_path path = { srcpos_file->dir, NULL, NULL }; + struct dtc_file *file = dtc_open_file($4.val, &path); + struct data d = empty_data; + + d = data_copy_file(file->file, -1); + + $$ = data_merge($1, d); + dtc_close_file(file); + } + | propdata DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +propdataprefix: + /* empty */ + { + $$ = empty_data; + } + | propdata ',' + { + $$ = $1; + } + | propdataprefix DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +celllist: + /* empty */ + { + $$ = empty_data; + } + | celllist cellval + { + $$ = data_append_cell($1, $2); + } + | celllist DT_REF + { + $$ = data_append_cell(data_add_marker($1, REF_PHANDLE, + $2), -1); + } + | celllist DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +cellbase: + /* empty */ + { + $$ = 16; + } + | DT_BASE + ; + +cellval: + DT_LITERAL + { + $$ = eval_literal($1, 0, 32); + } + | cellbase DT_LEGACYLITERAL + { + $$ = eval_literal($2, $1, 32); + } + ; + +bytestring: + /* empty */ + { + $$ = empty_data; + } + | bytestring DT_BYTE + { + $$ = data_append_byte($1, $2); + } + | bytestring DT_LABEL + { + $$ = data_add_marker($1, LABEL, $2); + } + ; + +subnodes: + /* empty */ + { + $$ = NULL; + } + | subnode subnodes + { + $$ = chain_node($1, $2); + } + | subnode propdef + { + yyerror("syntax error: properties must precede subnodes"); + YYERROR; + } + ; + +subnode: + label DT_PROPNODENAME nodedef + { + $$ = name_node($3, $2, $1); + } + ; + +label: + /* empty */ + { + $$ = NULL; + } + | DT_LABEL + { + $$ = $1; + } + ; + +%% + +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_file ? srcpos_file->name : ""; + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + treesource_error = 1; + va_end(va); +} + +void yyerror (char const *s) +{ + yyerrorf("%s", s); +} + +static unsigned long long eval_literal(const char *s, int base, int bits) +{ + unsigned long long val; + char *e; + + errno = 0; + val = strtoull(s, &e, base); + if (*e) + yyerror("bad characters in literal"); + else if ((errno == ERANGE) + || ((bits < 64) && (val >= (1ULL << bits)))) + yyerror("literal out of range"); + else if (errno != 0) + yyerror("bad literal"); + return val; +} diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c new file mode 100644 index 000000000000..d8fd43b4ac1a --- /dev/null +++ b/scripts/dtc/dtc.c @@ -0,0 +1,226 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#include "version_gen.h" + +/* + * Command line options + */ +int quiet; /* Level of quietness */ +int reservenum; /* Number of memory reservation slots */ +int minsize; /* Minimum blob size */ +int padsize; /* Additional padding to blob */ + +char *join_path(const char *path, const char *name) +{ + int lenp = strlen(path); + int lenn = strlen(name); + int len; + int needslash = 1; + char *str; + + len = lenp + lenn + 2; + if ((lenp > 0) && (path[lenp-1] == '/')) { + needslash = 0; + len--; + } + + str = xmalloc(len); + memcpy(str, path, lenp); + if (needslash) { + str[lenp] = '/'; + lenp++; + } + memcpy(str+lenp, name, lenn+1); + return str; +} + +static void fill_fullpaths(struct node *tree, const char *prefix) +{ + struct node *child; + const char *unit; + + tree->fullpath = join_path(prefix, tree->name); + + unit = strchr(tree->name, '@'); + if (unit) + tree->basenamelen = unit - tree->name; + else + tree->basenamelen = strlen(tree->name); + + for_each_child(tree, child) + fill_fullpaths(child, tree->fullpath); +} + +static void __attribute__ ((noreturn)) usage(void) +{ + fprintf(stderr, "Usage:\n"); + fprintf(stderr, "\tdtc [options] \n"); + fprintf(stderr, "\nOptions:\n"); + fprintf(stderr, "\t-h\n"); + fprintf(stderr, "\t\tThis help text\n"); + fprintf(stderr, "\t-q\n"); + fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n"); + fprintf(stderr, "\t-I \n"); + fprintf(stderr, "\t\tInput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n"); + fprintf(stderr, "\t-o \n"); + fprintf(stderr, "\t-O \n"); + fprintf(stderr, "\t\tOutput formats are:\n"); + fprintf(stderr, "\t\t\tdts - device tree source text\n"); + fprintf(stderr, "\t\t\tdtb - device tree blob\n"); + fprintf(stderr, "\t\t\tasm - assembler source\n"); + fprintf(stderr, "\t-V \n"); + fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION); + fprintf(stderr, "\t-R \n"); + fprintf(stderr, "\t\tMake space for reserve map entries (relevant for \n\t\tdtb and asm output only)\n"); + fprintf(stderr, "\t-S \n"); + fprintf(stderr, "\t\tMake the blob at least long (extra space)\n"); + fprintf(stderr, "\t-p \n"); + fprintf(stderr, "\t\tAdd padding to the blob of long (extra space)\n"); + fprintf(stderr, "\t-b \n"); + fprintf(stderr, "\t\tSet the physical boot cpu\n"); + fprintf(stderr, "\t-f\n"); + fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n"); + fprintf(stderr, "\t-v\n"); + fprintf(stderr, "\t\tPrint DTC version and exit\n"); + exit(3); +} + +int main(int argc, char *argv[]) +{ + struct boot_info *bi; + const char *inform = "dts"; + const char *outform = "dts"; + const char *outname = "-"; + int force = 0, check = 0; + const char *arg; + int opt; + FILE *outf = NULL; + int outversion = DEFAULT_FDT_VERSION; + long long cmdline_boot_cpuid = -1; + + quiet = 0; + reservenum = 0; + minsize = 0; + padsize = 0; + + while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) { + switch (opt) { + case 'I': + inform = optarg; + break; + case 'O': + outform = optarg; + break; + case 'o': + outname = optarg; + break; + case 'V': + outversion = strtol(optarg, NULL, 0); + break; + case 'R': + reservenum = strtol(optarg, NULL, 0); + break; + case 'S': + minsize = strtol(optarg, NULL, 0); + break; + case 'p': + padsize = strtol(optarg, NULL, 0); + break; + case 'f': + force = 1; + break; + case 'c': + check = 1; + break; + case 'q': + quiet++; + break; + case 'b': + cmdline_boot_cpuid = strtoll(optarg, NULL, 0); + break; + case 'v': + printf("Version: %s\n", DTC_VERSION); + exit(0); + case 'h': + default: + usage(); + } + } + + if (argc > (optind+1)) + usage(); + else if (argc < (optind+1)) + arg = "-"; + else + arg = argv[optind]; + + /* minsize and padsize are mutually exclusive */ + if (minsize && padsize) + die("Can't set both -p and -S\n"); + + fprintf(stderr, "DTC: %s->%s on file \"%s\"\n", + inform, outform, arg); + + if (streq(inform, "dts")) + bi = dt_from_source(arg); + else if (streq(inform, "fs")) + bi = dt_from_fs(arg); + else if(streq(inform, "dtb")) + bi = dt_from_blob(arg); + else + die("Unknown input format \"%s\"\n", inform); + + if (cmdline_boot_cpuid != -1) + bi->boot_cpuid_phys = cmdline_boot_cpuid; + + fill_fullpaths(bi->dt, ""); + process_checks(force, bi); + + + if (streq(outname, "-")) { + outf = stdout; + } else { + outf = fopen(outname, "w"); + if (! outf) + die("Couldn't open output file %s: %s\n", + outname, strerror(errno)); + } + + if (streq(outform, "dts")) { + dt_to_source(outf, bi); + } else if (streq(outform, "dtb")) { + dt_to_blob(outf, bi, outversion); + } else if (streq(outform, "asm")) { + dt_to_asm(outf, bi, outversion); + } else if (streq(outform, "null")) { + /* do nothing */ + } else { + die("Unknown output format \"%s\"\n", outform); + } + + exit(0); +} diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h new file mode 100644 index 000000000000..08d54c870086 --- /dev/null +++ b/scripts/dtc/dtc.h @@ -0,0 +1,246 @@ +#ifndef _DTC_H +#define _DTC_H + +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEFAULT_FDT_VERSION 17 +/* + * Command line options + */ +extern int quiet; /* Level of quietness */ +extern int reservenum; /* Number of memory reservation slots */ +extern int minsize; /* Minimum blob size */ +extern int padsize; /* Additional padding to blob */ + +static inline void __attribute__((noreturn)) die(char * str, ...) +{ + va_list ap; + + va_start(ap, str); + fprintf(stderr, "FATAL ERROR: "); + vfprintf(stderr, str, ap); + exit(1); +} + +static inline void *xmalloc(size_t len) +{ + void *new = malloc(len); + + if (! new) + die("malloc() failed\n"); + + return new; +} + +static inline void *xrealloc(void *p, size_t len) +{ + void *new = realloc(p, len); + + if (! new) + die("realloc() failed (len=%d)\n", len); + + return new; +} + +typedef uint32_t cell_t; + + +#define streq(a, b) (strcmp((a), (b)) == 0) +#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0) + +#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +/* Data blobs */ +enum markertype { + REF_PHANDLE, + REF_PATH, + LABEL, +}; + +struct marker { + enum markertype type; + int offset; + char *ref; + struct marker *next; +}; + +struct data { + int len; + char *val; + struct marker *markers; +}; + + +#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) + +#define for_each_marker(m) \ + for (; (m); (m) = (m)->next) +#define for_each_marker_of_type(m, t) \ + for_each_marker(m) \ + if ((m)->type == (t)) + +void data_free(struct data d); + +struct data data_grow_for(struct data d, int xlen); + +struct data data_copy_mem(const char *mem, int len); +struct data data_copy_escape_string(const char *s, int len); +struct data data_copy_file(FILE *f, size_t len); + +struct data data_append_data(struct data d, const void *p, int len); +struct data data_insert_at_marker(struct data d, struct marker *m, + const void *p, int len); +struct data data_merge(struct data d1, struct data d2); +struct data data_append_cell(struct data d, cell_t word); +struct data data_append_re(struct data d, const struct fdt_reserve_entry *re); +struct data data_append_addr(struct data d, uint64_t addr); +struct data data_append_byte(struct data d, uint8_t byte); +struct data data_append_zeroes(struct data d, int len); +struct data data_append_align(struct data d, int align); + +struct data data_add_marker(struct data d, enum markertype type, char *ref); + +int data_is_one_string(struct data d); + +/* DT constraints */ + +#define MAX_PROPNAME_LEN 31 +#define MAX_NODENAME_LEN 31 + +/* Live trees */ +struct property { + char *name; + struct data val; + + struct property *next; + + char *label; +}; + +struct node { + char *name; + struct property *proplist; + struct node *children; + + struct node *parent; + struct node *next_sibling; + + char *fullpath; + int basenamelen; + + cell_t phandle; + int addr_cells, size_cells; + + char *label; +}; + +#define for_each_property(n, p) \ + for ((p) = (n)->proplist; (p); (p) = (p)->next) + +#define for_each_child(n, c) \ + for ((c) = (n)->children; (c); (c) = (c)->next_sibling) + +struct property *build_property(char *name, struct data val, char *label); +struct property *chain_property(struct property *first, struct property *list); +struct property *reverse_properties(struct property *first); + +struct node *build_node(struct property *proplist, struct node *children); +struct node *name_node(struct node *node, char *name, char *label); +struct node *chain_node(struct node *first, struct node *list); + +void add_property(struct node *node, struct property *prop); +void add_child(struct node *parent, struct node *child); + +const char *get_unitname(struct node *node); +struct property *get_property(struct node *node, const char *propname); +cell_t propval_cell(struct property *prop); +struct node *get_subnode(struct node *node, const char *nodename); +struct node *get_node_by_path(struct node *tree, const char *path); +struct node *get_node_by_label(struct node *tree, const char *label); +struct node *get_node_by_phandle(struct node *tree, cell_t phandle); +struct node *get_node_by_ref(struct node *tree, const char *ref); +cell_t get_node_phandle(struct node *root, struct node *node); + +/* Boot info (tree plus memreserve information */ + +struct reserve_info { + struct fdt_reserve_entry re; + + struct reserve_info *next; + + char *label; +}; + +struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label); +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list); +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new); + + +struct boot_info { + struct reserve_info *reservelist; + struct node *dt; /* the device tree */ + uint32_t boot_cpuid_phys; +}; + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys); + +/* Checks */ + +void process_checks(int force, struct boot_info *bi); + +/* Flattened trees */ + +void dt_to_blob(FILE *f, struct boot_info *bi, int version); +void dt_to_asm(FILE *f, struct boot_info *bi, int version); + +struct boot_info *dt_from_blob(const char *fname); + +/* Tree source */ + +void dt_to_source(FILE *f, struct boot_info *bi); +struct boot_info *dt_from_source(const char *f); + +/* FS trees */ + +struct boot_info *dt_from_fs(const char *dirname); + +/* misc */ + +char *join_path(const char *path, const char *name); + +#endif /* _DTC_H */ diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c new file mode 100644 index 000000000000..76acd28c068d --- /dev/null +++ b/scripts/dtc/flattree.c @@ -0,0 +1,906 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +#define FTF_FULLPATH 0x1 +#define FTF_VARALIGN 0x2 +#define FTF_NAMEPROPS 0x4 +#define FTF_BOOTCPUID 0x8 +#define FTF_STRTABSIZE 0x10 +#define FTF_STRUCTSIZE 0x20 +#define FTF_NOPS 0x40 + +static struct version_info { + int version; + int last_comp_version; + int hdr_size; + int flags; +} version_table[] = { + {1, 1, FDT_V1_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS}, + {2, 1, FDT_V2_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID}, + {3, 1, FDT_V3_SIZE, + FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE}, + {16, 16, FDT_V3_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS}, + {17, 16, FDT_V17_SIZE, + FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS}, +}; + +struct emitter { + void (*cell)(void *, cell_t); + void (*string)(void *, char *, int); + void (*align)(void *, int); + void (*data)(void *, struct data); + void (*beginnode)(void *, const char *); + void (*endnode)(void *, const char *); + void (*property)(void *, const char *); +}; + +static void bin_emit_cell(void *e, cell_t val) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_cell(*dtbuf, val); +} + +static void bin_emit_string(void *e, char *str, int len) +{ + struct data *dtbuf = e; + + if (len == 0) + len = strlen(str); + + *dtbuf = data_append_data(*dtbuf, str, len); + *dtbuf = data_append_byte(*dtbuf, '\0'); +} + +static void bin_emit_align(void *e, int a) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_align(*dtbuf, a); +} + +static void bin_emit_data(void *e, struct data d) +{ + struct data *dtbuf = e; + + *dtbuf = data_append_data(*dtbuf, d.val, d.len); +} + +static void bin_emit_beginnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_BEGIN_NODE); +} + +static void bin_emit_endnode(void *e, const char *label) +{ + bin_emit_cell(e, FDT_END_NODE); +} + +static void bin_emit_property(void *e, const char *label) +{ + bin_emit_cell(e, FDT_PROP); +} + +static struct emitter bin_emitter = { + .cell = bin_emit_cell, + .string = bin_emit_string, + .align = bin_emit_align, + .data = bin_emit_data, + .beginnode = bin_emit_beginnode, + .endnode = bin_emit_endnode, + .property = bin_emit_property, +}; + +static void emit_label(FILE *f, const char *prefix, const char *label) +{ + fprintf(f, "\t.globl\t%s_%s\n", prefix, label); + fprintf(f, "%s_%s:\n", prefix, label); + fprintf(f, "_%s_%s:\n", prefix, label); +} + +static void emit_offset_label(FILE *f, const char *label, int offset) +{ + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s\t= . + %d\n", label, offset); +} + +static void asm_emit_cell(void *e, cell_t val) +{ + FILE *f = e; + + fprintf(f, "\t.long\t0x%x\n", val); +} + +static void asm_emit_string(void *e, char *str, int len) +{ + FILE *f = e; + char c = 0; + + if (len != 0) { + /* XXX: ewww */ + c = str[len]; + str[len] = '\0'; + } + + fprintf(f, "\t.string\t\"%s\"\n", str); + + if (len != 0) { + str[len] = c; + } +} + +static void asm_emit_align(void *e, int a) +{ + FILE *f = e; + + fprintf(f, "\t.balign\t%d\n", a); +} + +static void asm_emit_data(void *e, struct data d) +{ + FILE *f = e; + int off = 0; + struct marker *m = d.markers; + + for_each_marker_of_type(m, LABEL) + emit_offset_label(f, m->ref, m->offset); + + while ((d.len - off) >= sizeof(uint32_t)) { + fprintf(f, "\t.long\t0x%x\n", + fdt32_to_cpu(*((uint32_t *)(d.val+off)))); + off += sizeof(uint32_t); + } + + while ((d.len - off) >= 1) { + fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]); + off += 1; + } + + assert(off == d.len); +} + +static void asm_emit_beginnode(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_BEGIN_NODE\n"); +} + +static void asm_emit_endnode(void *e, const char *label) +{ + FILE *f = e; + + fprintf(f, "\t.long\tFDT_END_NODE\n"); + if (label) { + fprintf(f, "\t.globl\t%s_end\n", label); + fprintf(f, "%s_end:\n", label); + } +} + +static void asm_emit_property(void *e, const char *label) +{ + FILE *f = e; + + if (label) { + fprintf(f, "\t.globl\t%s\n", label); + fprintf(f, "%s:\n", label); + } + fprintf(f, "\t.long\tFDT_PROP\n"); +} + +static struct emitter asm_emitter = { + .cell = asm_emit_cell, + .string = asm_emit_string, + .align = asm_emit_align, + .data = asm_emit_data, + .beginnode = asm_emit_beginnode, + .endnode = asm_emit_endnode, + .property = asm_emit_property, +}; + +static int stringtable_insert(struct data *d, const char *str) +{ + int i; + + /* FIXME: do this more efficiently? */ + + for (i = 0; i < d->len; i++) { + if (streq(str, d->val + i)) + return i; + } + + *d = data_append_data(*d, str, strlen(str)+1); + return i; +} + +static void flatten_tree(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct property *prop; + struct node *child; + int seen_name_prop = 0; + + emit->beginnode(etarget, tree->label); + + if (vi->flags & FTF_FULLPATH) + emit->string(etarget, tree->fullpath, 0); + else + emit->string(etarget, tree->name, 0); + + emit->align(etarget, sizeof(cell_t)); + + for_each_property(tree, prop) { + int nameoff; + + if (streq(prop->name, "name")) + seen_name_prop = 1; + + nameoff = stringtable_insert(strbuf, prop->name); + + emit->property(etarget, prop->label); + emit->cell(etarget, prop->val.len); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8)) + emit->align(etarget, 8); + + emit->data(etarget, prop->val); + emit->align(etarget, sizeof(cell_t)); + } + + if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) { + emit->property(etarget, NULL); + emit->cell(etarget, tree->basenamelen+1); + emit->cell(etarget, stringtable_insert(strbuf, "name")); + + if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8)) + emit->align(etarget, 8); + + emit->string(etarget, tree->name, tree->basenamelen); + emit->align(etarget, sizeof(cell_t)); + } + + for_each_child(tree, child) { + flatten_tree(child, emit, etarget, strbuf, vi); + } + + emit->endnode(etarget, tree->label); +} + +static struct data flatten_reserve_list(struct reserve_info *reservelist, + struct version_info *vi) +{ + struct reserve_info *re; + struct data d = empty_data; + static struct fdt_reserve_entry null_re = {0,0}; + int j; + + for (re = reservelist; re; re = re->next) { + d = data_append_re(d, &re->re); + } + /* + * Add additional reserved slots if the user asked for them. + */ + for (j = 0; j < reservenum; j++) { + d = data_append_re(d, &null_re); + } + + return d; +} + +static void make_fdt_header(struct fdt_header *fdt, + struct version_info *vi, + int reservesize, int dtsize, int strsize, + int boot_cpuid_phys) +{ + int reserve_off; + + reservesize += sizeof(struct fdt_reserve_entry); + + memset(fdt, 0xff, sizeof(*fdt)); + + fdt->magic = cpu_to_fdt32(FDT_MAGIC); + fdt->version = cpu_to_fdt32(vi->version); + fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version); + + /* Reserve map should be doubleword aligned */ + reserve_off = ALIGN(vi->hdr_size, 8); + + fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off); + fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize); + fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize + + dtsize); + fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize); + + if (vi->flags & FTF_BOOTCPUID) + fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys); + if (vi->flags & FTF_STRTABSIZE) + fdt->size_dt_strings = cpu_to_fdt32(strsize); + if (vi->flags & FTF_STRUCTSIZE) + fdt->size_dt_struct = cpu_to_fdt32(dtsize); +} + +void dt_to_blob(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data blob = empty_data; + struct data reservebuf = empty_data; + struct data dtbuf = empty_data; + struct data strbuf = empty_data; + struct fdt_header fdt; + int padlen = 0; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi); + bin_emit_cell(&dtbuf, FDT_END); + + reservebuf = flatten_reserve_list(bi->reservelist, vi); + + /* Make header */ + make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len, + bi->boot_cpuid_phys); + + /* + * If the user asked for more space than is used, adjust the totalsize. + */ + if (minsize > 0) { + padlen = minsize - fdt32_to_cpu(fdt.totalsize); + if ((padlen < 0) && (quiet < 1)) + fprintf(stderr, + "Warning: blob size %d >= minimum size %d\n", + fdt32_to_cpu(fdt.totalsize), minsize); + } + + if (padsize > 0) + padlen = padsize; + + if (padlen > 0) { + int tsize = fdt32_to_cpu(fdt.totalsize); + tsize += padlen; + fdt.totalsize = cpu_to_fdt32(tsize); + } + + /* + * Assemble the blob: start with the header, add with alignment + * the reserve buffer, add the reserve map terminating zeroes, + * the device tree itself, and finally the strings. + */ + blob = data_append_data(blob, &fdt, vi->hdr_size); + blob = data_append_align(blob, 8); + blob = data_merge(blob, reservebuf); + blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry)); + blob = data_merge(blob, dtbuf); + blob = data_merge(blob, strbuf); + + /* + * If the user asked for more space than is used, pad out the blob. + */ + if (padlen > 0) + blob = data_append_zeroes(blob, padlen); + + fwrite(blob.val, blob.len, 1, f); + + if (ferror(f)) + die("Error writing device tree blob: %s\n", strerror(errno)); + + /* + * data_merge() frees the right-hand element so only the blob + * remains to be freed. + */ + data_free(blob); +} + +static void dump_stringtable_asm(FILE *f, struct data strbuf) +{ + const char *p; + int len; + + p = strbuf.val; + + while (p < (strbuf.val + strbuf.len)) { + len = strlen(p); + fprintf(f, "\t.string \"%s\"\n", p); + p += len+1; + } +} + +void dt_to_asm(FILE *f, struct boot_info *bi, int version) +{ + struct version_info *vi = NULL; + int i; + struct data strbuf = empty_data; + struct reserve_info *re; + const char *symprefix = "dt"; + + for (i = 0; i < ARRAY_SIZE(version_table); i++) { + if (version_table[i].version == version) + vi = &version_table[i]; + } + if (!vi) + die("Unknown device tree blob version %d\n", version); + + fprintf(f, "/* autogenerated by dtc, do not edit */\n\n"); + fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC); + fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE); + fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE); + fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP); + fprintf(f, "#define FDT_END 0x%x\n", FDT_END); + fprintf(f, "\n"); + + emit_label(f, symprefix, "blob_start"); + emit_label(f, symprefix, "header"); + fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n"); + fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n", + symprefix, symprefix); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version); + fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n", + vi->last_comp_version); + + if (vi->flags & FTF_BOOTCPUID) + fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n", + bi->boot_cpuid_phys); + + if (vi->flags & FTF_STRTABSIZE) + fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n", + symprefix, symprefix); + + if (vi->flags & FTF_STRUCTSIZE) + fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n", + symprefix, symprefix); + + /* + * Reserve map entries. + * Align the reserve map to a doubleword boundary. + * Each entry is an (address, size) pair of u64 values. + * Always supply a zero-sized temination entry. + */ + asm_emit_align(f, 8); + emit_label(f, symprefix, "reserve_map"); + + fprintf(f, "/* Memory reserve map from source file */\n"); + + /* + * Use .long on high and low halfs of u64s to avoid .quad + * as it appears .quad isn't available in some assemblers. + */ + for (re = bi->reservelist; re; re = re->next) { + if (re->label) { + fprintf(f, "\t.globl\t%s\n", re->label); + fprintf(f, "%s:\n", re->label); + } + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.address >> 32), + (unsigned int)(re->re.address & 0xffffffff)); + fprintf(f, "\t.long\t0x%08x, 0x%08x\n", + (unsigned int)(re->re.size >> 32), + (unsigned int)(re->re.size & 0xffffffff)); + } + for (i = 0; i < reservenum; i++) { + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + } + + fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n"); + + emit_label(f, symprefix, "struct_start"); + flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi); + fprintf(f, "\t.long\tFDT_END\n"); + emit_label(f, symprefix, "struct_end"); + + emit_label(f, symprefix, "strings_start"); + dump_stringtable_asm(f, strbuf); + emit_label(f, symprefix, "strings_end"); + + emit_label(f, symprefix, "blob_end"); + + /* + * If the user asked for more space than is used, pad it out. + */ + if (minsize > 0) { + fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n", + minsize, symprefix, symprefix); + } + if (padsize > 0) { + fprintf(f, "\t.space\t%d, 0\n", padsize); + } + emit_label(f, symprefix, "blob_abs_end"); + + data_free(strbuf); +} + +struct inbuf { + char *base, *limit, *ptr; +}; + +static void inbuf_init(struct inbuf *inb, void *base, void *limit) +{ + inb->base = base; + inb->limit = limit; + inb->ptr = inb->base; +} + +static void flat_read_chunk(struct inbuf *inb, void *p, int len) +{ + if ((inb->ptr + len) > inb->limit) + die("Premature end of data parsing flat device tree\n"); + + memcpy(p, inb->ptr, len); + + inb->ptr += len; +} + +static uint32_t flat_read_word(struct inbuf *inb) +{ + uint32_t val; + + assert(((inb->ptr - inb->base) % sizeof(val)) == 0); + + flat_read_chunk(inb, &val, sizeof(val)); + + return fdt32_to_cpu(val); +} + +static void flat_realign(struct inbuf *inb, int align) +{ + int off = inb->ptr - inb->base; + + inb->ptr = inb->base + ALIGN(off, align); + if (inb->ptr > inb->limit) + die("Premature end of data parsing flat device tree\n"); +} + +static char *flat_read_string(struct inbuf *inb) +{ + int len = 0; + const char *p = inb->ptr; + char *str; + + do { + if (p >= inb->limit) + die("Premature end of data parsing flat device tree\n"); + len++; + } while ((*p++) != '\0'); + + str = strdup(inb->ptr); + + inb->ptr += len; + + flat_realign(inb, sizeof(uint32_t)); + + return str; +} + +static struct data flat_read_data(struct inbuf *inb, int len) +{ + struct data d = empty_data; + + if (len == 0) + return empty_data; + + d = data_grow_for(d, len); + d.len = len; + + flat_read_chunk(inb, d.val, len); + + flat_realign(inb, sizeof(uint32_t)); + + return d; +} + +static char *flat_read_stringtable(struct inbuf *inb, int offset) +{ + const char *p; + + p = inb->base + offset; + while (1) { + if (p >= inb->limit || p < inb->base) + die("String offset %d overruns string table\n", + offset); + + if (*p == '\0') + break; + + p++; + } + + return strdup(inb->base + offset); +} + +static struct property *flat_read_property(struct inbuf *dtbuf, + struct inbuf *strbuf, int flags) +{ + uint32_t proplen, stroff; + char *name; + struct data val; + + proplen = flat_read_word(dtbuf); + stroff = flat_read_word(dtbuf); + + name = flat_read_stringtable(strbuf, stroff); + + if ((flags & FTF_VARALIGN) && (proplen >= 8)) + flat_realign(dtbuf, 8); + + val = flat_read_data(dtbuf, proplen); + + return build_property(name, val, NULL); +} + + +static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb) +{ + struct reserve_info *reservelist = NULL; + struct reserve_info *new; + const char *p; + struct fdt_reserve_entry re; + + /* + * Each entry is a pair of u64 (addr, size) values for 4 cell_t's. + * List terminates at an entry with size equal to zero. + * + * First pass, count entries. + */ + p = inb->ptr; + while (1) { + flat_read_chunk(inb, &re, sizeof(re)); + re.address = fdt64_to_cpu(re.address); + re.size = fdt64_to_cpu(re.size); + if (re.size == 0) + break; + + new = build_reserve_entry(re.address, re.size, NULL); + reservelist = add_reserve_entry(reservelist, new); + } + + return reservelist; +} + + +static char *nodename_from_path(const char *ppath, const char *cpath) +{ + int plen; + + plen = strlen(ppath); + + if (!strneq(ppath, cpath, plen)) + die("Path \"%s\" is not valid as a child of \"%s\"\n", + cpath, ppath); + + /* root node is a special case */ + if (!streq(ppath, "/")) + plen++; + + return strdup(cpath + plen); +} + +static struct node *unflatten_tree(struct inbuf *dtbuf, + struct inbuf *strbuf, + const char *parent_flatname, int flags) +{ + struct node *node; + char *flatname; + uint32_t val; + + node = build_node(NULL, NULL); + + flatname = flat_read_string(dtbuf); + + if (flags & FTF_FULLPATH) + node->name = nodename_from_path(parent_flatname, flatname); + else + node->name = flatname; + + do { + struct property *prop; + struct node *child; + + val = flat_read_word(dtbuf); + switch (val) { + case FDT_PROP: + if (node->children) + fprintf(stderr, "Warning: Flat tree input has " + "subnodes preceding a property.\n"); + prop = flat_read_property(dtbuf, strbuf, flags); + add_property(node, prop); + break; + + case FDT_BEGIN_NODE: + child = unflatten_tree(dtbuf,strbuf, flatname, flags); + add_child(node, child); + break; + + case FDT_END_NODE: + break; + + case FDT_END: + die("Premature FDT_END in device tree blob\n"); + break; + + case FDT_NOP: + if (!(flags & FTF_NOPS)) + fprintf(stderr, "Warning: NOP tag found in flat tree" + " version <16\n"); + + /* Ignore */ + break; + + default: + die("Invalid opcode word %08x in device tree blob\n", + val); + } + } while (val != FDT_END_NODE); + + return node; +} + + +struct boot_info *dt_from_blob(const char *fname) +{ + struct dtc_file *dtcf; + uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys; + uint32_t off_dt, off_str, off_mem_rsvmap; + int rc; + char *blob; + struct fdt_header *fdt; + char *p; + struct inbuf dtbuf, strbuf; + struct inbuf memresvbuf; + int sizeleft; + struct reserve_info *reservelist; + struct node *tree; + uint32_t val; + int flags = 0; + + dtcf = dtc_open_file(fname, NULL); + + rc = fread(&magic, sizeof(magic), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob magic number: %s\n", + strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob magic number\n"); + else + die("Mysterious short read reading magic number\n"); + } + + magic = fdt32_to_cpu(magic); + if (magic != FDT_MAGIC) + die("Blob has incorrect magic number\n"); + + rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob size: %s\n", strerror(errno)); + if (rc < 1) { + if (feof(dtcf->file)) + die("EOF reading DT blob size\n"); + else + die("Mysterious short read reading blob size\n"); + } + + totalsize = fdt32_to_cpu(totalsize); + if (totalsize < FDT_V1_SIZE) + die("DT blob size (%d) is too small\n", totalsize); + + blob = xmalloc(totalsize); + + fdt = (struct fdt_header *)blob; + fdt->magic = cpu_to_fdt32(magic); + fdt->totalsize = cpu_to_fdt32(totalsize); + + sizeleft = totalsize - sizeof(magic) - sizeof(totalsize); + p = blob + sizeof(magic) + sizeof(totalsize); + + while (sizeleft) { + if (feof(dtcf->file)) + die("EOF before reading %d bytes of DT blob\n", + totalsize); + + rc = fread(p, 1, sizeleft, dtcf->file); + if (ferror(dtcf->file)) + die("Error reading DT blob: %s\n", + strerror(errno)); + + sizeleft -= rc; + p += rc; + } + + off_dt = fdt32_to_cpu(fdt->off_dt_struct); + off_str = fdt32_to_cpu(fdt->off_dt_strings); + off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap); + version = fdt32_to_cpu(fdt->version); + boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys); + + if (off_mem_rsvmap >= totalsize) + die("Mem Reserve structure offset exceeds total size\n"); + + if (off_dt >= totalsize) + die("DT structure offset exceeds total size\n"); + + if (off_str > totalsize) + die("String table offset exceeds total size\n"); + + if (version >= 3) { + uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings); + if (off_str+size_str > totalsize) + die("String table extends past total size\n"); + inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str); + } else { + inbuf_init(&strbuf, blob + off_str, blob + totalsize); + } + + if (version >= 17) { + size_dt = fdt32_to_cpu(fdt->size_dt_struct); + if (off_dt+size_dt > totalsize) + die("Structure block extends past total size\n"); + } + + if (version < 16) { + flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN; + } else { + flags |= FTF_NOPS; + } + + inbuf_init(&memresvbuf, + blob + off_mem_rsvmap, blob + totalsize); + inbuf_init(&dtbuf, blob + off_dt, blob + totalsize); + + reservelist = flat_read_mem_reserve(&memresvbuf); + + val = flat_read_word(&dtbuf); + + if (val != FDT_BEGIN_NODE) + die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val); + + tree = unflatten_tree(&dtbuf, &strbuf, "", flags); + + val = flat_read_word(&dtbuf); + if (val != FDT_END) + die("Device tree blob doesn't end with FDT_END\n"); + + free(blob); + + dtc_close_file(dtcf); + + return build_boot_info(reservelist, tree, boot_cpuid_phys); +} diff --git a/scripts/dtc/fstree.c b/scripts/dtc/fstree.c new file mode 100644 index 000000000000..766b2694d935 --- /dev/null +++ b/scripts/dtc/fstree.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +#include +#include + +static struct node *read_fstree(const char *dirname) +{ + DIR *d; + struct dirent *de; + struct stat st; + struct node *tree; + + d = opendir(dirname); + if (!d) + die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno)); + + tree = build_node(NULL, NULL); + + while ((de = readdir(d)) != NULL) { + char *tmpnam; + + if (streq(de->d_name, ".") + || streq(de->d_name, "..")) + continue; + + tmpnam = join_path(dirname, de->d_name); + + if (lstat(tmpnam, &st) < 0) + die("stat(%s): %s\n", tmpnam, strerror(errno)); + + if (S_ISREG(st.st_mode)) { + struct property *prop; + FILE *pfile; + + pfile = fopen(tmpnam, "r"); + if (! pfile) { + fprintf(stderr, + "WARNING: Cannot open %s: %s\n", + tmpnam, strerror(errno)); + } else { + prop = build_property(strdup(de->d_name), + data_copy_file(pfile, + st.st_size), + NULL); + add_property(tree, prop); + fclose(pfile); + } + } else if (S_ISDIR(st.st_mode)) { + struct node *newchild; + + newchild = read_fstree(tmpnam); + newchild = name_node(newchild, strdup(de->d_name), + NULL); + add_child(tree, newchild); + } + + free(tmpnam); + } + + return tree; +} + +struct boot_info *dt_from_fs(const char *dirname) +{ + struct node *tree; + + tree = read_fstree(dirname); + tree = name_node(tree, "", NULL); + + return build_boot_info(NULL, tree, 0); +} + diff --git a/scripts/dtc/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt new file mode 100644 index 000000000000..6c42acfa21ec --- /dev/null +++ b/scripts/dtc/libfdt/Makefile.libfdt @@ -0,0 +1,8 @@ +# Makefile.libfdt +# +# This is not a complete Makefile of itself. Instead, it is designed to +# be easily embeddable into other systems of Makefiles. +# +LIBFDT_INCLUDES = fdt.h libfdt.h +LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c +LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o) diff --git a/scripts/dtc/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c new file mode 100644 index 000000000000..2acaec5923ae --- /dev/null +++ b/scripts/dtc/libfdt/fdt.c @@ -0,0 +1,201 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_check_header(const void *fdt) +{ + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +const void *fdt_offset_ptr(const void *fdt, int offset, int len) +{ + const char *p; + + if (fdt_version(fdt) >= 0x11) + if (((offset + len) < offset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + p = _fdt_offset_ptr(fdt, offset); + + if (p + len < p) + return NULL; + return p; +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset) +{ + const uint32_t *tagp, *lenp; + uint32_t tag; + const char *p; + + if (offset % FDT_TAGSIZE) + return -1; + + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (! tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + switch (tag) { + case FDT_BEGIN_NODE: + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (! p) + return FDT_END; + break; + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (! lenp) + return FDT_END; + /* skip name offset, length and value */ + offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp); + break; + } + + if (nextoffset) + *nextoffset = FDT_TAGALIGN(offset); + + return tag; +} + +int _fdt_check_node_offset(const void *fdt, int offset) +{ + if ((offset < 0) || (offset % FDT_TAGSIZE) + || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE)) + return -FDT_ERR_BADOFFSET; + + return offset; +} + +int fdt_next_node(const void *fdt, int offset, int *depth) +{ + int nextoffset = 0; + uint32_t tag; + + if (offset >= 0) + if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0) + return nextoffset; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_PROP: + case FDT_NOP: + break; + + case FDT_BEGIN_NODE: + if (depth) + (*depth)++; + break; + + case FDT_END_NODE: + if (depth) + (*depth)--; + break; + + case FDT_END: + return -FDT_ERR_NOTFOUND; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (tag != FDT_BEGIN_NODE); + + return offset; +} + +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memcmp(p, s, len) == 0) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_totalsize(fdt) > bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff --git a/scripts/dtc/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h new file mode 100644 index 000000000000..48ccfd910000 --- /dev/null +++ b/scripts/dtc/libfdt/fdt.h @@ -0,0 +1,60 @@ +#ifndef _FDT_H +#define _FDT_H + +#ifndef __ASSEMBLY__ + +struct fdt_header { + uint32_t magic; /* magic word FDT_MAGIC */ + uint32_t totalsize; /* total size of DT block */ + uint32_t off_dt_struct; /* offset to structure */ + uint32_t off_dt_strings; /* offset to strings */ + uint32_t off_mem_rsvmap; /* offset to memory reserve map */ + uint32_t version; /* format version */ + uint32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + uint32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + uint32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + uint32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + uint64_t address; + uint64_t size; +}; + +struct fdt_node_header { + uint32_t tag; + char name[0]; +}; + +struct fdt_property { + uint32_t tag; + uint32_t len; + uint32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(uint32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(uint32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t)) + +#endif /* _FDT_H */ diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c new file mode 100644 index 000000000000..fbbba44fcd0d --- /dev/null +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -0,0 +1,469 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_nodename_eq(const void *fdt, int offset, + const char *s, int len) +{ + const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1); + + if (! p) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else if (!memchr(s, '@', len) && (p[len] == '@')) + return 1; + else + return 0; +} + +const char *fdt_string(const void *fdt, int stroffset) +{ + return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; +} + +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) +{ + FDT_CHECK_HEADER(fdt); + *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address); + *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size); + return 0; +} + +int fdt_num_mem_rsv(const void *fdt) +{ + int i = 0; + + while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0) + i++; + return i; +} + +int fdt_subnode_offset_namelen(const void *fdt, int offset, + const char *name, int namelen) +{ + int depth; + + FDT_CHECK_HEADER(fdt); + + for (depth = 0, offset = fdt_next_node(fdt, offset, &depth); + (offset >= 0) && (depth > 0); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth < 0) + return -FDT_ERR_NOTFOUND; + else if ((depth == 1) + && _fdt_nodename_eq(fdt, offset, name, namelen)) + return offset; + } + + if (offset < 0) + return offset; /* error */ + else + return -FDT_ERR_NOTFOUND; +} + +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_path_offset(const void *fdt, const char *path) +{ + const char *end = path + strlen(path); + const char *p = path; + int offset = 0; + + FDT_CHECK_HEADER(fdt); + + if (*path != '/') + return -FDT_ERR_BADPATH; + + while (*p) { + const char *q; + + while (*p == '/') + p++; + if (! *p) + return offset; + q = strchr(p, '/'); + if (! q) + q = end; + + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) +{ + const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset); + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + if (len) + *len = strlen(nh->name); + + return nh->name; + + fail: + if (len) + *len = err; + return NULL; +} + +const struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + uint32_t tag; + const struct fdt_property *prop; + int namestroff; + int offset, nextoffset; + int err; + + if (((err = fdt_check_header(fdt)) != 0) + || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0)) + goto fail; + + nextoffset = err; + do { + offset = nextoffset; + + tag = fdt_next_tag(fdt, offset, &nextoffset); + switch (tag) { + case FDT_END: + err = -FDT_ERR_TRUNCATED; + goto fail; + + case FDT_BEGIN_NODE: + case FDT_END_NODE: + case FDT_NOP: + break; + + case FDT_PROP: + err = -FDT_ERR_BADSTRUCTURE; + prop = fdt_offset_ptr(fdt, offset, sizeof(*prop)); + if (! prop) + goto fail; + namestroff = fdt32_to_cpu(prop->nameoff); + if (strcmp(fdt_string(fdt, namestroff), name) == 0) { + /* Found it! */ + int len = fdt32_to_cpu(prop->len); + prop = fdt_offset_ptr(fdt, offset, + sizeof(*prop)+len); + if (! prop) + goto fail; + + if (lenp) + *lenp = len; + + return prop; + } + break; + + default: + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE)); + + err = -FDT_ERR_NOTFOUND; + fail: + if (lenp) + *lenp = err; + return NULL; +} + +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property(fdt, nodeoffset, name, lenp); + if (! prop) + return NULL; + + return prop->data; +} + +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) +{ + const uint32_t *php; + int len; + + php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); + if (!php || (len != sizeof(*php))) + return 0; + + return fdt32_to_cpu(*php); +} + +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) +{ + int pdepth = 0, p = 0; + int offset, depth, namelen; + const char *name; + + FDT_CHECK_HEADER(fdt); + + if (buflen < 2) + return -FDT_ERR_NOSPACE; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (pdepth < depth) + continue; /* overflowed buffer */ + + while (pdepth > depth) { + do { + p--; + } while (buf[p-1] != '/'); + pdepth--; + } + + name = fdt_get_name(fdt, offset, &namelen); + if (!name) + return namelen; + if ((p + namelen + 1) <= buflen) { + memcpy(buf + p, name, namelen); + p += namelen; + buf[p++] = '/'; + pdepth++; + } + + if (offset == nodeoffset) { + if (pdepth < (depth + 1)) + return -FDT_ERR_NOSPACE; + + if (p > 1) /* special case so that root path is "/", not "" */ + p--; + buf[p] = '\0'; + return p; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth) +{ + int offset, depth; + int supernodeoffset = -FDT_ERR_INTERNAL; + + FDT_CHECK_HEADER(fdt); + + if (supernodedepth < 0) + return -FDT_ERR_NOTFOUND; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth == supernodedepth) + supernodeoffset = offset; + + if (offset == nodeoffset) { + if (nodedepth) + *nodedepth = depth; + + if (supernodedepth > depth) + return -FDT_ERR_NOTFOUND; + else + return supernodeoffset; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_depth(const void *fdt, int nodeoffset) +{ + int nodedepth; + int err; + + err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); + if (err) + return (err < 0) ? err : -FDT_ERR_INTERNAL; + return nodedepth; +} + +int fdt_parent_offset(const void *fdt, int nodeoffset) +{ + int nodedepth = fdt_node_depth(fdt, nodeoffset); + + if (nodedepth < 0) + return nodedepth; + return fdt_supernode_atdepth_offset(fdt, nodeoffset, + nodedepth - 1, NULL); +} + +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen) +{ + int offset; + const void *val; + int len; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_getprop(), then if that didn't + * find what we want, we scan over them again making our way + * to the next node. Still it's the easiest to implement + * approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + val = fdt_getprop(fdt, offset, propname, &len); + if (val && (len == proplen) + && (memcmp(val, propval, len) == 0)) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) +{ + if ((phandle == 0) || (phandle == -1)) + return -FDT_ERR_BADPHANDLE; + phandle = cpu_to_fdt32(phandle); + return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle", + &phandle, sizeof(phandle)); +} + +int _stringlist_contains(const char *strlist, int listlen, const char *str) +{ + int len = strlen(str); + const char *p; + + while (listlen >= len) { + if (memcmp(str, strlist, len+1) == 0) + return 1; + p = memchr(strlist, '\0', listlen); + if (!p) + return 0; /* malformed strlist.. */ + listlen -= (p-strlist) + 1; + strlist = p + 1; + } + return 0; +} + +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible) +{ + const void *prop; + int len; + + prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); + if (!prop) + return len; + if (_stringlist_contains(prop, len, compatible)) + return 0; + else + return 1; +} + +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible) +{ + int offset, err; + + FDT_CHECK_HEADER(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_node_check_compatible(), then if + * that didn't find what we want, we scan over them again + * making our way to the next node. Still it's the easiest to + * implement approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + err = fdt_node_check_compatible(fdt, offset, compatible); + if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) + return err; + else if (err == 0) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c new file mode 100644 index 000000000000..8e7ec4cb7bcd --- /dev/null +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -0,0 +1,463 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_blocks_misordered(const void *fdt, + int mem_rsv_size, int struct_size) +{ + return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) + || (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) + || (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + struct_size)) + || (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); +} + +static int _fdt_rw_check_header(void *fdt) +{ + FDT_CHECK_HEADER(fdt); + + if (fdt_version(fdt) < 17) + return -FDT_ERR_BADVERSION; + if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (fdt_version(fdt) > 17) + fdt_set_version(fdt, 17); + + return 0; +} + +#define FDT_RW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_rw_check_header(fdt)) != 0) \ + return err; \ + } + +static inline int _fdt_data_size(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen) +{ + char *p = splicepoint; + char *end = (char *)fdt + _fdt_data_size(fdt); + + if (((p + oldlen) < p) || ((p + oldlen) > end)) + return -FDT_ERR_BADOFFSET; + if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt))) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, end - p - oldlen); + return 0; +} + +static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p, + int oldn, int newn) +{ + int delta = (newn - oldn) * sizeof(*p); + int err; + err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); + if (err) + return err; + fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_struct(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = _fdt_splice(fdt, p, oldlen, newlen))) + return err; + + fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int _fdt_splice_string(void *fdt, int newlen) +{ + void *p = (char *)fdt + + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = _fdt_splice(fdt, p, 0, newlen))) + return err; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = _fdt_splice_string(fdt, len); + if (err) + return err; + + memcpy(new, s, len); + return (new - strtab); +} + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt)); + err = _fdt_splice_mem_rsv(fdt, re, 0, 1); + if (err) + return err; + + re->address = cpu_to_fdt64(address); + re->size = cpu_to_fdt64(size); + return 0; +} + +int fdt_del_mem_rsv(void *fdt, int n) +{ + struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n); + int err; + + FDT_RW_CHECK_HEADER(fdt); + + if (n >= fdt_num_mem_rsv(fdt)) + return -FDT_ERR_NOTFOUND; + + err = _fdt_splice_mem_rsv(fdt, re, 1, 0); + if (err) + return err; + return 0; +} + +static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (! (*prop)) + return oldlen; + + if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(len)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int _fdt_add_property(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int proplen; + int nextoffset; + int namestroff; + int err; + + if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0) + return nextoffset; + + namestroff = _fdt_find_add_string(fdt, name); + if (namestroff < 0) + return namestroff; + + *prop = _fdt_offset_ptr_w(fdt, nextoffset); + proplen = sizeof(**prop) + FDT_TAGALIGN(len); + + err = _fdt_splice_struct(fdt, *prop, 0, proplen); + if (err) + return err; + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_set_name(void *fdt, int nodeoffset, const char *name) +{ + char *namep; + int oldlen, newlen; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); + if (!namep) + return oldlen; + + newlen = strlen(name); + + err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1), + FDT_TAGALIGN(newlen+1)); + if (err) + return err; + + memcpy(namep, name, newlen+1); + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err; + + FDT_RW_CHECK_HEADER(fdt); + + err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + memcpy(prop->data, val, len); + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + FDT_RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + proplen = sizeof(*prop) + FDT_TAGALIGN(len); + return _fdt_splice_struct(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + uint32_t *endtag; + + FDT_RW_CHECK_HEADER(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + } while ((tag == FDT_PROP) || (tag == FDT_NOP)); + + nh = _fdt_offset_ptr_w(fdt, offset); + nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; + + err = _fdt_splice_struct(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); + memcpy(nh->name, name, namelen); + endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + FDT_RW_CHECK_HEADER(fdt); + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +static void _fdt_packblocks(const char *old, char *new, + int mem_rsv_size, int struct_size) +{ + int mem_rsv_off, struct_off, strings_off; + + mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); + struct_off = mem_rsv_off + mem_rsv_size; + strings_off = struct_off + struct_size; + + memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); + fdt_set_off_mem_rsvmap(new, mem_rsv_off); + + memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); + fdt_set_off_dt_struct(new, struct_off); + fdt_set_size_dt_struct(new, struct_size); + + memmove(new + strings_off, old + fdt_off_dt_strings(old), + fdt_size_dt_strings(old)); + fdt_set_off_dt_strings(new, strings_off); + fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); +} + +int fdt_open_into(const void *fdt, void *buf, int bufsize) +{ + int err; + int mem_rsv_size, struct_size; + int newsize; + const char *fdtstart = fdt; + const char *fdtend = fdtstart + fdt_totalsize(fdt); + char *tmp; + + FDT_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + + if (fdt_version(fdt) >= 17) { + struct_size = fdt_size_dt_struct(fdt); + } else { + struct_size = 0; + while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) + ; + } + + if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) { + /* no further work necessary */ + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + fdt_set_version(buf, 17); + fdt_set_size_dt_struct(buf, struct_size); + fdt_set_totalsize(buf, bufsize); + return 0; + } + + /* Need to reorder */ + newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size + + struct_size + fdt_size_dt_strings(fdt); + + if (bufsize < newsize) + return -FDT_ERR_NOSPACE; + + /* First attempt to build converted tree at beginning of buffer */ + tmp = buf; + /* But if that overlaps with the old tree... */ + if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { + /* Try right after the old tree instead */ + tmp = (char *)(uintptr_t)fdtend; + if ((tmp + newsize) > ((char *)buf + bufsize)) + return -FDT_ERR_NOSPACE; + } + + _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size); + memmove(buf, tmp, newsize); + + fdt_set_magic(buf, FDT_MAGIC); + fdt_set_totalsize(buf, bufsize); + fdt_set_version(buf, 17); + fdt_set_last_comp_version(buf, 16); + fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); + + return 0; +} + +int fdt_pack(void *fdt) +{ + int mem_rsv_size; + + FDT_RW_CHECK_HEADER(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); + fdt_set_totalsize(fdt, _fdt_data_size(fdt)); + + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c new file mode 100644 index 000000000000..e6c3ceee8c58 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_strerror.c @@ -0,0 +1,96 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +struct fdt_errtabent { + const char *str; +}; + +#define FDT_ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct fdt_errtabent fdt_errtable[] = { + FDT_ERRTABENT(FDT_ERR_NOTFOUND), + FDT_ERRTABENT(FDT_ERR_EXISTS), + FDT_ERRTABENT(FDT_ERR_NOSPACE), + + FDT_ERRTABENT(FDT_ERR_BADOFFSET), + FDT_ERRTABENT(FDT_ERR_BADPATH), + FDT_ERRTABENT(FDT_ERR_BADSTATE), + + FDT_ERRTABENT(FDT_ERR_TRUNCATED), + FDT_ERRTABENT(FDT_ERR_BADMAGIC), + FDT_ERRTABENT(FDT_ERR_BADVERSION), + FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), + FDT_ERRTABENT(FDT_ERR_BADLAYOUT), +}; +#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0])) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return ""; + else if (errval == 0) + return ""; + else if (errval > -FDT_ERRTABSIZE) { + const char *s = fdt_errtable[-errval].str; + + if (s) + return s; + } + + return ""; +} diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c new file mode 100644 index 000000000000..698329e0ccaf --- /dev/null +++ b/scripts/dtc/libfdt/fdt_sw.c @@ -0,0 +1,257 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +static int _fdt_sw_check_header(void *fdt) +{ + if (fdt_magic(fdt) != FDT_SW_MAGIC) + return -FDT_ERR_BADMAGIC; + /* FIXME: should check more details about the header state */ + return 0; +} + +#define FDT_SW_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = _fdt_sw_check_header(fdt)) != 0) \ + return err; \ + } + +static void *_fdt_grab_space(void *fdt, int len) +{ + int offset = fdt_size_dt_struct(fdt); + int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_size_dt_struct(fdt, offset + len); + return fdt_offset_ptr_w(fdt, offset, len); +} + +int fdt_create(void *buf, int bufsize) +{ + void *fdt = buf; + + if (bufsize < sizeof(struct fdt_header)) + return -FDT_ERR_NOSPACE; + + memset(buf, 0, bufsize); + + fdt_set_magic(fdt, FDT_SW_MAGIC); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_totalsize(fdt, bufsize); + + fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry))); + fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); + fdt_set_off_dt_strings(fdt, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int offset; + + FDT_SW_CHECK_HEADER(fdt); + + if (fdt_size_dt_struct(fdt)) + return -FDT_ERR_BADSTATE; + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)((char *)fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + return fdt_add_reservemap_entry(fdt, 0, 0); +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int namelen = strlen(name) + 1; + + FDT_SW_CHECK_HEADER(fdt); + + nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + uint32_t *en; + + FDT_SW_CHECK_HEADER(fdt); + + en = _fdt_grab_space(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int _fdt_find_add_string(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + const char *p; + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + int struct_top, offset; + + p = _fdt_find_string(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + /* Add it */ + offset = -strtabsize - len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) + offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab + offset, s, len); + fdt_set_size_dt_strings(fdt, strtabsize + len); + return offset; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + struct fdt_property *prop; + int nameoff; + + FDT_SW_CHECK_HEADER(fdt); + + nameoff = _fdt_find_add_string(fdt, name); + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); + if (! prop) + return -FDT_ERR_NOSPACE; + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + memcpy(prop->data, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + char *p = (char *)fdt; + uint32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + FDT_SW_CHECK_HEADER(fdt); + + /* Add terminator */ + end = _fdt_grab_space(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(fdt, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = + fdt_offset_ptr_w(fdt, offset, sizeof(*prop)); + int nameoff; + + if (! prop) + return -FDT_ERR_BADSTRUCTURE; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + + /* Finally, adjust the header */ + fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); + fdt_set_magic(fdt, FDT_MAGIC); + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c new file mode 100644 index 000000000000..a4652c6e787e --- /dev/null +++ b/scripts/dtc/libfdt/fdt_wip.c @@ -0,0 +1,145 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include +#include + +#include "libfdt_internal.h" + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen); + if (! propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + memcpy(propval, val, len); + return 0; +} + +static void _fdt_nop_region(void *start, int len) +{ + uint32_t *p; + + for (p = start; (char *)p < ((char *)start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (! prop) + return len; + + _fdt_nop_region(prop, len + sizeof(*prop)); + + return 0; +} + +int _fdt_node_end_offset(void *fdt, int nodeoffset) +{ + int level = 0; + uint32_t tag; + int offset, nextoffset; + + tag = fdt_next_tag(fdt, nodeoffset, &nextoffset); + if (tag != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + return offset; + + case FDT_BEGIN_NODE: + level++; + break; + + case FDT_END_NODE: + level--; + break; + + case FDT_PROP: + case FDT_NOP: + break; + + default: + return -FDT_ERR_BADSTRUCTURE; + } + } while (level >= 0); + + return nextoffset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = _fdt_node_end_offset(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0), + endoffset - nodeoffset); + return 0; +} diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h new file mode 100644 index 000000000000..ce80e4fb41b2 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt.h @@ -0,0 +1,1076 @@ +#ifndef _LIBFDT_H +#define _LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +#define FDT_FIRST_SUPPORTED_VERSION 0x10 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attemped to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle + * value. phandle values of 0 and -1 are not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: Structure block of the given device tree + * ends without an FDT_END tag. */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +#define FDT_ERR_MAX 13 + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +const void *fdt_offset_ptr(const void *fdt, int offset, int checklen); +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ + +#define fdt_get_header(fdt, field) \ + (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define __fdt_set_hdr(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +__fdt_set_hdr(magic); +__fdt_set_hdr(totalsize); +__fdt_set_hdr(off_dt_struct); +__fdt_set_hdr(off_dt_strings); +__fdt_set_hdr(off_mem_rsvmap); +__fdt_set_hdr(version); +__fdt_set_hdr(last_comp_version); +__fdt_set_hdr(boot_cpuid_phys); +__fdt_set_hdr(size_dt_strings); +__fdt_set_hdr(size_dt_struct); +#undef __fdt_set_hdr + +/** + * fdt_check_header - sanity check a device tree or possible device tree + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree with sane information in its + * header. + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag +* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: cell (32-bit integer) value to replace the property with + * + * fdt_setprop_inplace_cell() replaces the value of a given property + * with the 32-bit integer cell value in val, converting val to + * big-endian if necessary. This function cannot change the size of a + * property, and so will only work if the property already exists and + * has length 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +int fdt_create(void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_cell - set a property to a single cell value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_cell() sets the value of the named property in the + * given node to the given cell value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#endif /* _LIBFDT_H */ diff --git a/scripts/dtc/libfdt/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h new file mode 100644 index 000000000000..449bf602daf1 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_env.h @@ -0,0 +1,23 @@ +#ifndef _LIBFDT_ENV_H +#define _LIBFDT_ENV_H + +#include +#include +#include + +#define _B(n) ((unsigned long long)((uint8_t *)&x)[n]) +static inline uint32_t fdt32_to_cpu(uint32_t x) +{ + return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3); +} +#define cpu_to_fdt32(x) fdt32_to_cpu(x) + +static inline uint64_t fdt64_to_cpu(uint64_t x) +{ + return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32) + | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7); +} +#define cpu_to_fdt64(x) fdt64_to_cpu(x) +#undef _B + +#endif /* _LIBFDT_ENV_H */ diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h new file mode 100644 index 000000000000..46eb93e4af5c --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_internal.h @@ -0,0 +1,95 @@ +#ifndef _LIBFDT_INTERNAL_H +#define _LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include + +#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) + +#define FDT_CHECK_HEADER(fdt) \ + { \ + int err; \ + if ((err = fdt_check_header(fdt)) != 0) \ + return err; \ + } + +uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset); +int _fdt_check_node_offset(const void *fdt, int offset); +const char *_fdt_find_string(const char *strtab, int tabsize, const char *s); +int _fdt_node_end_offset(void *fdt, int nodeoffset); + +static inline const void *_fdt_offset_ptr(const void *fdt, int offset) +{ + return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; +} + +static inline void *_fdt_offset_ptr_w(void *fdt, int offset) +{ + return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset); +} + +static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n) +{ + const struct fdt_reserve_entry *rsv_table = + (const struct fdt_reserve_entry *) + ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); + + return rsv_table + n; +} +static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n) +{ + return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n); +} + +#define FDT_SW_MAGIC (~FDT_MAGIC) + +#endif /* _LIBFDT_INTERNAL_H */ diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c new file mode 100644 index 000000000000..0ca3de550b3f --- /dev/null +++ b/scripts/dtc/livetree.c @@ -0,0 +1,308 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" + +/* + * Tree building functions + */ + +struct property *build_property(char *name, struct data val, char *label) +{ + struct property *new = xmalloc(sizeof(*new)); + + new->name = name; + new->val = val; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct property *chain_property(struct property *first, struct property *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct property *reverse_properties(struct property *first) +{ + struct property *p = first; + struct property *head = NULL; + struct property *next; + + while (p) { + next = p->next; + p->next = head; + head = p; + p = next; + } + return head; +} + +struct node *build_node(struct property *proplist, struct node *children) +{ + struct node *new = xmalloc(sizeof(*new)); + struct node *child; + + memset(new, 0, sizeof(*new)); + + new->proplist = reverse_properties(proplist); + new->children = children; + + for_each_child(new, child) { + child->parent = new; + } + + return new; +} + +struct node *name_node(struct node *node, char *name, char * label) +{ + assert(node->name == NULL); + + node->name = name; + + node->label = label; + + return node; +} + +struct node *chain_node(struct node *first, struct node *list) +{ + assert(first->next_sibling == NULL); + + first->next_sibling = list; + return first; +} + +void add_property(struct node *node, struct property *prop) +{ + struct property **p; + + prop->next = NULL; + + p = &node->proplist; + while (*p) + p = &((*p)->next); + + *p = prop; +} + +void add_child(struct node *parent, struct node *child) +{ + struct node **p; + + child->next_sibling = NULL; + child->parent = parent; + + p = &parent->children; + while (*p) + p = &((*p)->next_sibling); + + *p = child; +} + +struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size, + char *label) +{ + struct reserve_info *new = xmalloc(sizeof(*new)); + + new->re.address = address; + new->re.size = size; + + new->next = NULL; + + new->label = label; + + return new; +} + +struct reserve_info *chain_reserve_entry(struct reserve_info *first, + struct reserve_info *list) +{ + assert(first->next == NULL); + + first->next = list; + return first; +} + +struct reserve_info *add_reserve_entry(struct reserve_info *list, + struct reserve_info *new) +{ + struct reserve_info *last; + + new->next = NULL; + + if (! list) + return new; + + for (last = list; last->next; last = last->next) + ; + + last->next = new; + + return list; +} + +struct boot_info *build_boot_info(struct reserve_info *reservelist, + struct node *tree, uint32_t boot_cpuid_phys) +{ + struct boot_info *bi; + + bi = xmalloc(sizeof(*bi)); + bi->reservelist = reservelist; + bi->dt = tree; + bi->boot_cpuid_phys = boot_cpuid_phys; + + return bi; +} + +/* + * Tree accessor functions + */ + +const char *get_unitname(struct node *node) +{ + if (node->name[node->basenamelen] == '\0') + return ""; + else + return node->name + node->basenamelen + 1; +} + +struct property *get_property(struct node *node, const char *propname) +{ + struct property *prop; + + for_each_property(node, prop) + if (streq(prop->name, propname)) + return prop; + + return NULL; +} + +cell_t propval_cell(struct property *prop) +{ + assert(prop->val.len == sizeof(cell_t)); + return fdt32_to_cpu(*((cell_t *)prop->val.val)); +} + +struct node *get_subnode(struct node *node, const char *nodename) +{ + struct node *child; + + for_each_child(node, child) + if (streq(child->name, nodename)) + return child; + + return NULL; +} + +struct node *get_node_by_path(struct node *tree, const char *path) +{ + const char *p; + struct node *child; + + if (!path || ! (*path)) + return tree; + + while (path[0] == '/') + path++; + + p = strchr(path, '/'); + + for_each_child(tree, child) { + if (p && strneq(path, child->name, p-path)) + return get_node_by_path(child, p+1); + else if (!p && streq(path, child->name)) + return child; + } + + return NULL; +} + +struct node *get_node_by_label(struct node *tree, const char *label) +{ + struct node *child, *node; + + assert(label && (strlen(label) > 0)); + + if (tree->label && streq(tree->label, label)) + return tree; + + for_each_child(tree, child) { + node = get_node_by_label(child, label); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_phandle(struct node *tree, cell_t phandle) +{ + struct node *child, *node; + + assert((phandle != 0) && (phandle != -1)); + + if (tree->phandle == phandle) + return tree; + + for_each_child(tree, child) { + node = get_node_by_phandle(child, phandle); + if (node) + return node; + } + + return NULL; +} + +struct node *get_node_by_ref(struct node *tree, const char *ref) +{ + if (ref[0] == '/') + return get_node_by_path(tree, ref); + else + return get_node_by_label(tree, ref); +} + +cell_t get_node_phandle(struct node *root, struct node *node) +{ + static cell_t phandle = 1; /* FIXME: ick, static local */ + + if ((node->phandle != 0) && (node->phandle != -1)) + return node->phandle; + + assert(! get_property(node, "linux,phandle")); + + while (get_node_by_phandle(root, phandle)) + phandle++; + + node->phandle = phandle; + add_property(node, + build_property("linux,phandle", + data_append_cell(empty_data, phandle), + NULL)); + + return node->phandle; +} diff --git a/scripts/dtc/srcpos.c b/scripts/dtc/srcpos.c new file mode 100644 index 000000000000..9641b7628b4d --- /dev/null +++ b/scripts/dtc/srcpos.c @@ -0,0 +1,116 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +/* + * Like yylineno, this is the current open file pos. + */ + +struct dtc_file *srcpos_file; + +static int dtc_open_one(struct dtc_file *file, + const char *search, + const char *fname) +{ + char *fullname; + + if (search) { + fullname = xmalloc(strlen(search) + strlen(fname) + 2); + + strcpy(fullname, search); + strcat(fullname, "/"); + strcat(fullname, fname); + } else { + fullname = strdup(fname); + } + + file->file = fopen(fullname, "r"); + if (!file->file) { + free(fullname); + return 0; + } + + file->name = fullname; + return 1; +} + + +struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search) +{ + static const struct search_path default_search = { NULL, NULL, NULL }; + + struct dtc_file *file; + const char *slash; + + file = xmalloc(sizeof(struct dtc_file)); + + slash = strrchr(fname, '/'); + if (slash) { + char *dir = xmalloc(slash - fname + 1); + + memcpy(dir, fname, slash - fname); + dir[slash - fname] = 0; + file->dir = dir; + } else { + file->dir = NULL; + } + + if (streq(fname, "-")) { + file->name = "stdin"; + file->file = stdin; + return file; + } + + if (fname[0] == '/') { + file->file = fopen(fname, "r"); + if (!file->file) + goto fail; + + file->name = strdup(fname); + return file; + } + + if (!search) + search = &default_search; + + while (search) { + if (dtc_open_one(file, search->dir, fname)) + return file; + + if (errno != ENOENT) + goto fail; + + search = search->next; + } + +fail: + die("Couldn't open \"%s\": %s\n", fname, strerror(errno)); +} + +void dtc_close_file(struct dtc_file *file) +{ + if (fclose(file->file)) + die("Error closing \"%s\": %s\n", file->name, strerror(errno)); + + free(file->dir); + free(file); +} diff --git a/scripts/dtc/srcpos.h b/scripts/dtc/srcpos.h new file mode 100644 index 000000000000..e17c7c04db8e --- /dev/null +++ b/scripts/dtc/srcpos.h @@ -0,0 +1,85 @@ +/* + * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +/* + * Augment the standard YYLTYPE with a filenum index into an + * array of all opened filenames. + */ + +#include + +struct dtc_file { + char *dir; + const char *name; + FILE *file; +}; + +#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED) +typedef struct YYLTYPE { + int first_line; + int first_column; + int last_line; + int last_column; + struct dtc_file *file; +} YYLTYPE; + +#define YYLTYPE_IS_DECLARED 1 +#define YYLTYPE_IS_TRIVIAL 1 +#endif + +/* Cater to old parser templates. */ +#ifndef YYID +#define YYID(n) (n) +#endif + +#define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (YYID (N)) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + (Current).file = YYRHSLOC (Rhs, N).file; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + (Current).file = YYRHSLOC (Rhs, 0).file; \ + } \ + while (YYID (0)) + + + +extern void yyerror(char const *); +extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); + +extern struct dtc_file *srcpos_file; + +struct search_path { + const char *dir; /* NULL for current directory */ + struct search_path *prev, *next; +}; + +extern struct dtc_file *dtc_open_file(const char *fname, + const struct search_path *search); +extern void dtc_close_file(struct dtc_file *file); diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c new file mode 100644 index 000000000000..ebeb6eb27907 --- /dev/null +++ b/scripts/dtc/treesource.c @@ -0,0 +1,278 @@ +/* + * (C) Copyright David Gibson , IBM Corporation. 2005. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include "dtc.h" +#include "srcpos.h" + +extern FILE *yyin; +extern int yyparse(void); + +struct boot_info *the_boot_info; +int treesource_error; + +struct boot_info *dt_from_source(const char *fname) +{ + the_boot_info = NULL; + treesource_error = 0; + + srcpos_file = dtc_open_file(fname, NULL); + yyin = srcpos_file->file; + + if (yyparse() != 0) + die("Unable to parse input tree\n"); + + if (treesource_error) + die("Syntax error parsing input tree\n"); + + return the_boot_info; +} + +static void write_prefix(FILE *f, int level) +{ + int i; + + for (i = 0; i < level; i++) + fputc('\t', f); +} + +int isstring(char c) +{ + return (isprint(c) + || (c == '\0') + || strchr("\a\b\t\n\v\f\r", c)); +} + +static void write_propval_string(FILE *f, struct data val) +{ + const char *str = val.val; + int i; + int newchunk = 1; + struct marker *m = val.markers; + + assert(str[val.len-1] == '\0'); + + for (i = 0; i < (val.len-1); i++) { + char c = str[i]; + + if (newchunk) { + while (m && (m->offset <= i)) { + if (m->type == LABEL) { + assert(m->offset == i); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + fprintf(f, "\""); + newchunk = 0; + } + + switch (c) { + case '\a': + fprintf(f, "\\a"); + break; + case '\b': + fprintf(f, "\\b"); + break; + case '\t': + fprintf(f, "\\t"); + break; + case '\n': + fprintf(f, "\\n"); + break; + case '\v': + fprintf(f, "\\v"); + break; + case '\f': + fprintf(f, "\\f"); + break; + case '\r': + fprintf(f, "\\r"); + break; + case '\\': + fprintf(f, "\\\\"); + break; + case '\"': + fprintf(f, "\\\""); + break; + case '\0': + fprintf(f, "\", "); + newchunk = 1; + break; + default: + if (isprint(c)) + fprintf(f, "%c", c); + else + fprintf(f, "\\x%02hhx", c); + } + } + fprintf(f, "\""); + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } +} + +static void write_propval_cells(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + cell_t *cp = (cell_t *)val.val; + struct marker *m = val.markers; + + fprintf(f, "<"); + for (;;) { + while (m && (m->offset <= ((char *)cp - val.val))) { + if (m->type == LABEL) { + assert(m->offset == ((char *)cp - val.val)); + fprintf(f, "%s: ", m->ref); + } + m = m->next; + } + + fprintf(f, "0x%x", fdt32_to_cpu(*cp++)); + if ((void *)cp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, ">"); +} + +static void write_propval_bytes(FILE *f, struct data val) +{ + void *propend = val.val + val.len; + const char *bp = val.val; + struct marker *m = val.markers; + + fprintf(f, "["); + for (;;) { + while (m && (m->offset == (bp-val.val))) { + if (m->type == LABEL) + fprintf(f, "%s: ", m->ref); + m = m->next; + } + + fprintf(f, "%02hhx", *bp++); + if ((const void *)bp >= propend) + break; + fprintf(f, " "); + } + + /* Wrap up any labels at the end of the value */ + for_each_marker_of_type(m, LABEL) { + assert (m->offset == val.len); + fprintf(f, " %s:", m->ref); + } + fprintf(f, "]"); +} + +static void write_propval(FILE *f, struct property *prop) +{ + int len = prop->val.len; + const char *p = prop->val.val; + struct marker *m = prop->val.markers; + int nnotstring = 0, nnul = 0; + int nnotstringlbl = 0, nnotcelllbl = 0; + int i; + + if (len == 0) { + fprintf(f, ";\n"); + return; + } + + for (i = 0; i < len; i++) { + if (! isstring(p[i])) + nnotstring++; + if (p[i] == '\0') + nnul++; + } + + for_each_marker_of_type(m, LABEL) { + if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0')) + nnotstringlbl++; + if ((m->offset % sizeof(cell_t)) != 0) + nnotcelllbl++; + } + + fprintf(f, " = "); + if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul)) + && (nnotstringlbl == 0)) { + write_propval_string(f, prop->val); + } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) { + write_propval_cells(f, prop->val); + } else { + write_propval_bytes(f, prop->val); + } + + fprintf(f, ";\n"); +} + +static void write_tree_source_node(FILE *f, struct node *tree, int level) +{ + struct property *prop; + struct node *child; + + write_prefix(f, level); + if (tree->label) + fprintf(f, "%s: ", tree->label); + if (tree->name && (*tree->name)) + fprintf(f, "%s {\n", tree->name); + else + fprintf(f, "/ {\n"); + + for_each_property(tree, prop) { + write_prefix(f, level+1); + if (prop->label) + fprintf(f, "%s: ", prop->label); + fprintf(f, "%s", prop->name); + write_propval(f, prop); + } + for_each_child(tree, child) { + fprintf(f, "\n"); + write_tree_source_node(f, child, level+1); + } + write_prefix(f, level); + fprintf(f, "};\n"); +} + + +void dt_to_source(FILE *f, struct boot_info *bi) +{ + struct reserve_info *re; + + fprintf(f, "/dts-v1/;\n\n"); + + for (re = bi->reservelist; re; re = re->next) { + if (re->label) + fprintf(f, "%s: ", re->label); + fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n", + (unsigned long long)re->re.address, + (unsigned long long)re->re.size); + } + + write_tree_source_node(f, bi->dt, 0); +} + diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h new file mode 100644 index 000000000000..658ff42429d6 --- /dev/null +++ b/scripts/dtc/version_gen.h @@ -0,0 +1 @@ +#define DTC_VERSION "DTC 1.2.0" -- cgit v1.2.3 From 1cbac972ba28e706fa9ce4d4c81830040bc811ee Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 2 May 2009 13:39:56 +0400 Subject: x86: uv io-apic - use BUILD_BUG_ON instead of BUG_ON The expression is known to be true/false at compilation time so we're allowed to use build-time instead of run-time check. Also align 'entry' items assignment. [ Impact: shrink kernel a bit, cleanup ] Signed-off-by: Cyrill Gorcunov Cc: Jack Steiner LKML-Reference: <20090502093956.GB4791@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 8aef5f9d9479..a80335ba12cc 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3749,6 +3749,8 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, unsigned long flags; int err; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + cfg = irq_cfg(irq); err = assign_irq_vector(irq, cfg, eligible_cpu); @@ -3762,15 +3764,13 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade, mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - - entry->vector = cfg->vector; - entry->delivery_mode = apic->irq_delivery_mode; - entry->dest_mode = apic->irq_dest_mode; - entry->polarity = 0; - entry->trigger = 0; - entry->mask = 0; - entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); + entry->vector = cfg->vector; + entry->delivery_mode = apic->irq_delivery_mode; + entry->dest_mode = apic->irq_dest_mode; + entry->polarity = 0; + entry->trigger = 0; + entry->mask = 0; + entry->dest = apic->cpu_mask_to_apicid(eligible_cpu); mmr_pnode = uv_blade_to_pnode(mmr_blade); uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value); @@ -3788,10 +3788,10 @@ void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset) struct uv_IO_APIC_route_entry *entry; int mmr_pnode; + BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); + mmr_value = 0; entry = (struct uv_IO_APIC_route_entry *)&mmr_value; - BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long)); - entry->mask = 1; mmr_pnode = uv_blade_to_pnode(mmr_blade); -- cgit v1.2.3 From 9a8709d44139748fe2e0ab56d20d8c384c8b65ad Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 2 May 2009 00:25:11 +0400 Subject: x86: uv - prevent NULL dereference in uv_system_init() We may reach NULL dereference oops if kmalloc failed. Prevent it with explicit BUG_ON. [ Impact: more controlled assert in 'impossible' scenario ] Signed-off-by: Cyrill Gorcunov Acked-by: Jack Steiner LKML-Reference: <20090501202511.GE4633@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 873bf7121e89..9d9e2281a829 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -569,15 +569,18 @@ void __init uv_system_init(void) bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_blade_info); get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_node_to_blade); memset(uv_node_to_blade, 255, bytes); bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus(); uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL); + BUG_ON(!uv_cpu_to_blade); memset(uv_cpu_to_blade, 255, bytes); blade = 0; -- cgit v1.2.3 From 283a5d250e5315b76e7bfd7498c581324c922bfe Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 2 May 2009 10:14:15 -0400 Subject: [ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930". Signed-off-by: Robert P. J. Day Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e66d9099eab..17d3fbd368a3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" -- cgit v1.2.3 From 6da7342ff1c5274c51ada084974668d10f769c16 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 4 May 2009 11:44:38 +0200 Subject: amd-iommu: fix iommu flag masks The feature bits should be set via bitmasks, not via feature IDs. [ Impact: fix feature enabling in newer IOMMU versions ] Signed-off-by: Joerg Roedel LKML-Reference: <20090504102028.GA30307@amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 42c33cebf00f..8c0be0902dac 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -49,10 +49,10 @@ #define IVHD_DEV_EXT_SELECT 0x46 #define IVHD_DEV_EXT_SELECT_RANGE 0x47 -#define IVHD_FLAG_HT_TUN_EN 0x00 -#define IVHD_FLAG_PASSPW_EN 0x01 -#define IVHD_FLAG_RESPASSPW_EN 0x02 -#define IVHD_FLAG_ISOC_EN 0x03 +#define IVHD_FLAG_HT_TUN_EN_MASK 0x01 +#define IVHD_FLAG_PASSPW_EN_MASK 0x02 +#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04 +#define IVHD_FLAG_ISOC_EN_MASK 0x08 #define IVMD_FLAG_EXCL_RANGE 0x08 #define IVMD_FLAG_UNITY_MAP 0x01 @@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, * First set the recommended feature enable bits from ACPI * into the IOMMU control registers */ - h->flags & IVHD_FLAG_HT_TUN_EN ? + h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - h->flags & IVHD_FLAG_PASSPW_EN ? + h->flags & IVHD_FLAG_PASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - h->flags & IVHD_FLAG_RESPASSPW_EN ? + h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - h->flags & IVHD_FLAG_ISOC_EN ? + h->flags & IVHD_FLAG_ISOC_EN_MASK ? iommu_feature_enable(iommu, CONTROL_ISOC_EN) : iommu_feature_disable(iommu, CONTROL_ISOC_EN); -- cgit v1.2.3 From 35d11680a9d82c93eb92f08f9702b72877427b4a Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 4 May 2009 20:28:59 +0200 Subject: x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo Commit 7ad728f98162cb1af06a85b2a5fc422dddd4fb78 (cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t) changed the output of /proc/cpuinfo for siblings: Example on an AMD Phenom: physical id : 0 siblings : 1 core id : 3 cpu cores : 4 Before that commit it was: physical id : 0 siblings : 4 core id : 3 cpu cores : 4 Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings. This is due to the following hunk of above commit: | --- a/arch/x86/kernel/cpu/proc.c | +++ b/arch/x86/kernel/cpu/proc.c | @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf | if (c->x86_max_cores * smp_num_siblings > 1) { | seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); | seq_printf(m, "siblings\t: %d\n", | - cpus_weight(per_cpu(cpu_core_map, cpu))); | + cpumask_weight(cpu_sibling_mask(cpu))); | seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); | seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); | seq_printf(m, "apicid\t\t: %d\n", c->apicid); This was a mistake, because the impact line shows that this side-effect was not anticipated: Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y So revert the respective hunk to restore the old behavior. [ Impact: fix sibling-info regression in /proc/cpuinfo ] Signed-off-by: Andreas Herrmann Cc: Rusty Russell LKML-Reference: <20090504182859.GA29045@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index f93047fed791..d5e30397246b 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", - cpumask_weight(cpu_sibling_mask(cpu))); + cpumask_weight(cpu_core_mask(cpu))); seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); seq_printf(m, "apicid\t\t: %d\n", c->apicid); -- cgit v1.2.3 From f2d41ecb0f096e4fc58d1456c9d54560f6e2b955 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 12:02:23 -0400 Subject: [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 92 +++++++++++++++++++++++++++---------- 1 file changed, 69 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae44012e..dcf8153a947d 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 7e14acb44021132e66801066e9e7527300c5fc10 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 14:09:33 -0400 Subject: [ARM] orion5x: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 363 ++++++++++++++++++++++++++++--------- 1 file changed, 279 insertions(+), 84 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5c..5b98f7645119 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -269,6 +275,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 3a5df4bf2a1829a342f3a416c217049e8caa0a1b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 4 May 2009 14:28:59 -0400 Subject: [ARM] mv78xx0: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/mv78xx0_defconfig | 429 +++++++++++++++++++++++++++++-------- 1 file changed, 335 insertions(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b0698722e0cb..398274b0771a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -247,6 +260,11 @@ CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + # # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -465,6 +481,11 @@ CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1150,6 +1327,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From de0096d80980e26fab16ac3eff57f47fadad92cb Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 26 Mar 2009 22:21:16 +0100 Subject: mxc : Clean up properly when imx_dma_free() used without imx_dma_disable() The sequence imx_dma_request() imx_dma_enable() imx_dma_free() left the dma channel in_use mode and did not release the timer. Signed-off-by: Martin Fuzzey Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/dma-mx1-mx2.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f1..a9126ed7935a 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -737,10 +737,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 -- cgit v1.2.3 From f2292532a5f0cf6359adca349cdd2a0150581937 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 26 Mar 2009 22:27:52 +0100 Subject: mxc : BUG in imx_dma_request On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by: Martin Fuzzey Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/dma-mx1-mx2.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index a9126ed7935a..77646436c00e 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); -- cgit v1.2.3 From 9abf137c6dbf6eabb3add98fcd8352c3dd520568 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 16 Apr 2009 14:12:54 +0200 Subject: ARM: ARCH_MXC should select HAVE_CLK All i.MX platforms support calls and should select HAVE_CLK. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9faccc411c2a..e60ec54df334 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -454,6 +454,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors -- cgit v1.2.3 From f1fd4c64af58ec28d29bced9e94ecf6d5177c2b0 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 17 Apr 2009 15:20:26 +0200 Subject: mx31: remove mx31moboard_defconfig We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/configs/mx31moboard_defconfig | 790 --------------------------------- 1 file changed, 790 deletions(-) delete mode 100644 arch/arm/configs/mx31moboard_defconfig (limited to 'arch') diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig deleted file mode 100644 index e90f86d6deef..000000000000 --- a/arch/arm/configs/mx31moboard_defconfig +++ /dev/null @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -- cgit v1.2.3 From e2c97e7fdc9d71637840dea8f76eb3782c3b2023 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 21 Apr 2009 12:39:59 +0200 Subject: MXC: remove BUG_ON in interrupt handler On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483bad8a26..89e95798cc3b 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif -- cgit v1.2.3 From 7b9020badf78327b3fcb567b466a1dd4d33710ce Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 21 Apr 2009 22:56:14 +0200 Subject: mx27ads: move PBC mapping out of vmalloc space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/board-mx27ads.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135cd..d42f4e6116f8 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) -- cgit v1.2.3 From 25971dfe3a9d14c3b91fc51de96d7f48da394c99 Mon Sep 17 00:00:00 2001 From: Magnus Lilja Date: Sat, 18 Apr 2009 18:20:50 +0200 Subject: i.MX31: Disable CPU_32v6K in mx3_defconfig. The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by: Magnus Lilja Signed-off-by: Sascha Hauer --- arch/arm/configs/mx3_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 72a8201a5370..20ada526f6de 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y -- cgit v1.2.3 From 0692698cb7369ea1ce74f3f87f70baf5072f8a37 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 5 May 2009 13:57:52 +0100 Subject: [IA64] xen_domu_defconfig: fix build issues/warnings - drivers/xen/events.c did not compile - xen_setup_hook caused a modpost section warning - the use of u64 (instead of unsigned long long) together with a %llu in drivers/xen/balloon.c caused a compiler warning Signed-off-by: Jan Beulich Signed-off-by: Tony Luck --- arch/ia64/include/asm/idle.h | 7 +++++++ arch/ia64/include/asm/xen/events.h | 7 +------ arch/ia64/xen/xensetup.S | 2 -- drivers/xen/balloon.c | 3 ++- 4 files changed, 10 insertions(+), 9 deletions(-) create mode 100644 arch/ia64/include/asm/idle.h (limited to 'arch') diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h new file mode 100644 index 000000000000..b7685015a8ba --- /dev/null +++ b/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h index 73248781fba8..b8370c8b6198 100644 --- a/arch/ia64/include/asm/xen/events.h +++ b/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S index 28fed1fcc079..aff8346ea193 100644 --- a/arch/ia64/xen/xensetup.S +++ b/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index efa4b363ce72..f5bbd9e83416 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr char *buf) { return sprintf(buf, "%llu\n", - (u64)balloon_stats.target_pages << PAGE_SHIFT); + (unsigned long long)balloon_stats.target_pages + << PAGE_SHIFT); } static ssize_t store_target(struct sys_device *dev, -- cgit v1.2.3 From 7eccf7b227b6d3b1745b937ce35efc9c27f9b0e5 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 5 May 2009 12:50:02 -0700 Subject: x86, srat: do not register nodes beyond e820 map The mem= option will truncate the memory map at a specified address so it's not possible to register nodes with memory beyond the e820 upper bound. unparse_node() is only called when then node had memory associated with it, although with the mem= option it is no longer addressable. [ Impact: fix boot hang on certain (large) systems ] Reported-by: "Zhang, Yanmin" Signed-off-by: David Rientjes Acked-by: Jack Steiner LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 33c5fa57e43d..01765955baaf 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -361,6 +361,7 @@ static void __init unparse_node(int node) { int i; node_clear(node, nodes_parsed); + node_clear(node, cpu_nodes_parsed); for (i = 0; i < MAX_LOCAL_APIC; i++) { if (apicid_to_node[i] == node) apicid_to_node[i] = NUMA_NO_NODE; -- cgit v1.2.3 From e0e5ea3268db428d19e1c5fa00e6f583861cbdbd Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 4 May 2009 09:08:26 +0530 Subject: x86: Fix a typo in a printk message [ Impact: printk message cleanup ] Signed-off-by: Nikanth Karthikesan LKML-Reference: <200905040908.27299.knikanth@suse.de> Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 16ae70fc57e7..29a0e37114f8 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void) if (num_memory_chunks == 0) { printk(KERN_WARNING - "could not finy any ACPI SRAT memory areas.\n"); + "could not find any ACPI SRAT memory areas.\n"); goto out_fail; } -- cgit v1.2.3 From a029b706d3b2d3a139bdeae84131d9a0f35f6478 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 7 May 2009 14:25:48 +0100 Subject: [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) As per commit 284901a90a9e0b812ca3f5f852cbbfb60d10249d, use DMA_BIT_MASK(n) Signed-off-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c039674fe99e..b2e7f9c63bc5 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -211,7 +211,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_32BIT_MASK; +static u64 ide_dma_mask = DMA_BIT_MASK(32); static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -220,7 +220,7 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; -- cgit v1.2.3 From ae51e609843f7d0aaeb1c2ad9f89d252a4899885 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 7 May 2009 16:18:40 +0100 Subject: [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types From: Bruce Ashfield To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman Signed-off-by: Bruce Ashfield Signed-off-by: Paul Gortmaker Signed-off-by: Russell King --- arch/arm/include/asm/elf.h | 16 +++++++++------- arch/arm/kernel/module.c | 15 +++++++++++++++ 2 files changed, 24 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19bcf928..c207504de84d 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e39b496..bac03c81489d 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); -- cgit v1.2.3 From 61438766514a2d7f191ce1b3cf6812eabbef4ef7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:02:19 +0100 Subject: x86: fix boot hang in early_reserve_e820() If the first non-reserved (sub-)range doesn't fit the size requested, an endless loop will be entered. If a range returned from find_e820_area_size() turns out insufficient in size, the range must be skipped before calling the function again. [ Impact: fixes boot hang on some platforms ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/kernel/e820.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ef2c3563357d..006281302925 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 addr; u64 start; - start = startt; - while (size < sizet && (start + 1)) + for (start = startt; ; start += size) { start = find_e820_area_size(start, &size, align); - - if (size < sizet) - return 0; + if (!(start + 1)) + return 0; + if (size >= sizet) + break; + } #ifdef CONFIG_X86_32 if (start >= MAXMEM) -- cgit v1.2.3 From 498343967613183611ac37dccb2846496d954c06 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 6 May 2009 13:06:47 +0100 Subject: x86-64: finish cleanup_highmaps()'s job wrt. _brk_end With the introduction of the .brk section, special care must be taken that no unused page table entries remain if _brk_end and _end are separated by a 2M page boundary. cleanup_highmap() runs very early and hence cannot take care of that, hence potential entries needing to be removed past _brk_end must be cleared once the brk allocator has done its job. [ Impact: avoids undesirable TLB aliases ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/mm/init.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index fd3da1dda1c9..ae4f7b5d7104 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, #endif #ifdef CONFIG_X86_64 - if (!after_bootmem) + if (!after_bootmem && !start) { + pud_t *pud; + pmd_t *pmd; + mmu_cr4_features = read_cr4(); + + /* + * _brk_end cannot change anymore, but it and _end may be + * located on different 2M pages. cleanup_highmap(), however, + * can only consider _end when it runs, so destroy any + * mappings beyond _brk_end here. + */ + pud = pud_offset(pgd_offset_k(_brk_end), _brk_end); + pmd = pmd_offset(pud, _brk_end - 1); + while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1)) + pmd_clear(pmd); + } #endif __flush_tlb_all(); -- cgit v1.2.3 From 6407df5ca54a511054200a1eb23f78f723ca1de4 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Fri, 8 May 2009 10:51:41 +0800 Subject: x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP Tim Starling reported that crashdump will panic with kernel compiled with CONFIG_KEXEC_JUMP due to null pointer deference in machine_kexec_32.c: machine_kexec(), when deferencing kexec_image. Refering to: http://bugzilla.kernel.org/show_bug.cgi?id=13265 This patch fixes the BUG via replacing global variable reference: kexec_image in machine_kexec() with local variable reference: image, which is more appropriate, and will not be null. Same BUG is in machine_kexec_64.c too, so fixed too in the same way. [ Impact: fix crash on kexec ] Reported-by: Tim Starling Signed-off-by: Huang Ying LKML-Reference: <1241751101.6259.85.camel@yhuang-dev.sh.intel.com> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/machine_kexec_32.c | 4 ++-- arch/x86/kernel/machine_kexec_64.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index e7368c1da01d..c1c429d00130 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image) unsigned int preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 89cea4d44679..84c3bf209e98 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image) int save_ftrace_enabled; #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) save_processor_state(); #endif @@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image) image->preserve_context); #ifdef CONFIG_KEXEC_JUMP - if (kexec_image->preserve_context) + if (image->preserve_context) restore_processor_state(); #endif -- cgit v1.2.3 From 33df4db04a79660150e1948e3296eeb451ac121b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 7 May 2009 11:56:44 -0700 Subject: x86: xen, i386: reserve Xen pagetables The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: Bryan Donlan Signed-off-by: Jeremy Fitzhardinge Cc: Xen-devel Cc: Linus Torvalds LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 9842b1212407..e25a78e1113a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1794,6 +1794,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir))); + reserve_early(__pa(xen_start_info->pt_base), + __pa(xen_start_info->pt_base + + xen_start_info->nr_pt_frames * PAGE_SIZE), + "XEN PAGETABLES"); + return swapper_pg_dir; } #endif /* CONFIG_X86_64 */ -- cgit v1.2.3 From e5299926d7459d9fa7c7f856983147817aedb10e Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Fri, 8 May 2009 17:28:40 +0900 Subject: x86: MCE: make cmci_discover_lock irq-safe Lockdep reports the warning below when Li tries to offline one cpu: [ 110.835487] ================================= [ 110.835616] [ INFO: inconsistent lock state ] [ 110.835688] 2.6.30-rc4-00336-g8c9ed89 #52 [ 110.835757] --------------------------------- [ 110.835828] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 110.835908] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 110.835982] (cmci_discover_lock){?.+...}, at: [] cmci_clear+0x30/0x9b cmci_clear() can be called via smp_call_function_single(). It is better to disable interrupt while holding cmci_discover_lock, to turn it into an irq-safe lock - we can deadlock otherwise. [ Impact: fix possible deadlock in the MCE code ] Reported-by: Shaohua Li Signed-off-by: Hidetoshi Seto Cc: Andi Kleen Cc: Andrew Morton LKML-Reference: <4A03ED38.8000700@jp.fujitsu.com> Signed-off-by: Ingo Molnar Reported-by: Shaohua Li --- arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index d6b72df89d69..cef3ee30744b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -151,10 +151,11 @@ static void print_update(char *type, int *hdr, int num) static void cmci_discover(int banks, int boot) { unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned); + unsigned long flags; int hdr = 0; int i; - spin_lock(&cmci_discover_lock); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { u64 val; @@ -184,7 +185,7 @@ static void cmci_discover(int banks, int boot) WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); } } - spin_unlock(&cmci_discover_lock); + spin_unlock_irqrestore(&cmci_discover_lock, flags); if (hdr) printk(KERN_CONT "\n"); } @@ -211,13 +212,14 @@ void cmci_recheck(void) */ void cmci_clear(void) { + unsigned long flags; int i; int banks; u64 val; if (!cmci_supported(&banks)) return; - spin_lock(&cmci_discover_lock); + spin_lock_irqsave(&cmci_discover_lock, flags); for (i = 0; i < banks; i++) { if (!test_bit(i, __get_cpu_var(mce_banks_owned))) continue; @@ -227,7 +229,7 @@ void cmci_clear(void) wrmsrl(MSR_IA32_MC0_CTL2 + i, val); __clear_bit(i, __get_cpu_var(mce_banks_owned)); } - spin_unlock(&cmci_discover_lock); + spin_unlock_irqrestore(&cmci_discover_lock, flags); } /* -- cgit v1.2.3 From 61fe91e1319556f32bebfd7ed2c68ef02e2c17f7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 9 May 2009 23:47:42 -0700 Subject: x86: apic: Check rev 3 fadt correctly for physical_apic bit Impact: fix fadt version checking FADT2_REVISION_ID has value 3 aka rev 3 FADT. So need to use >= instead of >, as other places in the code do. [ Impact: extend scope of APIC boot quirk ] Signed-off-by: Yinghai Lu LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic_flat_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c index 306e5e88fb6f..744e6d8af27b 100644 --- a/arch/x86/kernel/apic/apic_flat_64.c +++ b/arch/x86/kernel/apic/apic_flat_64.c @@ -235,7 +235,7 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) * regardless of how many processors are present (x86_64 ES7000 * is an example). */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) { printk(KERN_DEBUG "system APIC only can use physical flat"); return 1; -- cgit v1.2.3 From 4401da6111ac58f94234417427d06a72c4048c74 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 2 May 2009 10:40:57 -0700 Subject: x86: read apic ID in the !acpi_lapic case Ed found that on 32-bit, boot_cpu_physical_apicid is not read right, when the mptable is broken. Interestingly, actually three paths use/set it: 1. acpi: at that time that is already read from reg 2. mptable: only read from mptable 3. no madt, and no mptable, that use default apic id 0 for 64-bit, -1 for 32-bit so we could read the apic id for the 2/3 path. We trust the hardware register more than we trust a BIOS data structure (the mptable). We can also avoid the double set_fixmap() when acpi_lapic is used, and also need to move cpu_has_apic earlier and call apic_disable(). Also when need to update the apic id, we'd better read and set the apic version as well - so that quirks are applied precisely. v2: make path 3 with 64bit, use -1 as apic id, so could read it later. v3: fix whitespace problem pointed out by Ed Swierk [ Impact: get correct apic id for bsp other than acpi path ] Reported-by: Ed Swierk Signed-off-by: Yinghai Lu Acked-by: Cyrill Gorcunov LKML-Reference: <49FC85A9.2070702@kernel.org> [ v4: sanity-check in the ACPI case too ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e258bedce7cb..1ee966f4ae95 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1456,7 +1456,6 @@ static int __init detect_init_APIC(void) } mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - boot_cpu_physical_apicid = 0; return 0; } #else @@ -1570,6 +1569,8 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + unsigned int new_apicid; + if (x2apic_mode) { boot_cpu_physical_apicid = read_apic_id(); return; @@ -1586,21 +1587,31 @@ void __init init_apic_mappings(void) } else apic_phys = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + /* lets check if we may NOP'ify apic operations */ + if (!cpu_has_apic) { + pr_info("APIC: disable apic facility\n"); + apic_disable(); + return; + } + + /* + * acpi lapic path already maps that address in + * acpi_register_lapic_address() + */ + if (!acpi_lapic) + set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", APIC_BASE, apic_phys); - /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); - - /* lets check if we may to NOP'ify apic operations */ - if (!cpu_has_apic) { - pr_info("APIC: disable apic facility\n"); - apic_disable(); + new_apicid = read_apic_id(); + if (boot_cpu_physical_apicid != new_apicid) { + boot_cpu_physical_apicid = new_apicid; + apic_version[new_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); } } -- cgit v1.2.3 From 97a52714658cd959a3cfa35c5b6f489859f0204b Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 8 May 2009 18:23:50 +0200 Subject: x86: display extended apic registers with print_local_APIC and cpu_debug code Both print_local_APIC (used when apic=debug kernel param is set) and cpu_debug code missed support for some extended APIC registers that I'd like to see. This adds support to show: - extended APIC feature register - extended APIC control register - extended LVT registers [ Impact: print more debug info ] Signed-off-by: Andreas Herrmann Cc: Jaswinder Singh Rajput Cc: Cyrill Gorcunov LKML-Reference: <20090508162350.GO29045@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apicdef.h | 8 ++++---- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apic/io_apic.c | 14 +++++++++++++- arch/x86/kernel/cpu/cpu_debug.c | 14 +++++++++++++- 4 files changed, 31 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index bc9514fb3b13..7ddb36ab933b 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -22,6 +22,7 @@ # define APIC_INTEGRATED(x) (1) #endif #define APIC_XAPIC(x) ((x) >= 0x14) +#define APIC_EXT_SPACE(x) ((x) & 0x80000000) #define APIC_TASKPRI 0x80 #define APIC_TPRI_MASK 0xFFu #define APIC_ARBPRI 0x90 @@ -116,7 +117,9 @@ #define APIC_TDR_DIV_32 0x8 #define APIC_TDR_DIV_64 0x9 #define APIC_TDR_DIV_128 0xA -#define APIC_EILVT0 0x500 +#define APIC_EFEAT 0x400 +#define APIC_ECTRL 0x410 +#define APIC_EILVTn(n) (0x500 + 0x10 * n) #define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */ #define APIC_EILVT_NR_AMD_10H 4 #define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF) @@ -125,9 +128,6 @@ #define APIC_EILVT_MSG_NMI 0x4 #define APIC_EILVT_MSG_EXT 0x7 #define APIC_EILVT_MASKED (1 << 16) -#define APIC_EILVT1 0x510 -#define APIC_EILVT2 0x520 -#define APIC_EILVT3 0x530 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) #define APIC_BASE_MSR 0x800 diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 1ee966f4ae95..0e6543fafb50 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -395,7 +395,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) { - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0); unsigned int v = (mask << 16) | (msg_type << 8) | vector; apic_write(reg, v); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 2afe145d277f..65b824c9c4fc 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1739,7 +1739,7 @@ __apicdebuginit(void) print_APIC_bitfield(int base) __apicdebuginit(void) print_local_APIC(void *dummy) { - unsigned int v, ver, maxlvt; + unsigned int i, v, ver, maxlvt; u64 icr; if (apic_verbosity == APIC_QUIET) @@ -1827,6 +1827,18 @@ __apicdebuginit(void) print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); v = apic_read(APIC_TDCR); printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); + + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + v = apic_read(APIC_EFEAT); + maxlvt = (v >> 16) & 0xff; + printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v); + v = apic_read(APIC_ECTRL); + printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v); + for (i = 0; i < maxlvt; i++) { + v = apic_read(APIC_EILVTn(i)); + printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v); + } + } printk("\n"); } diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 46e29ab96c6a..2fc4f6bb9ca5 100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -588,8 +588,20 @@ static void print_apic(void *arg) seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT)); seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT)); seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR)); -#endif /* CONFIG_X86_LOCAL_APIC */ + if (boot_cpu_has(X86_FEATURE_EXTAPIC)) { + unsigned int i, v, maxeilvt; + + v = apic_read(APIC_EFEAT); + maxeilvt = (v >> 16) & 0xff; + seq_printf(seq, " EFEAT\t\t: %08x\n", v); + seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL)); + for (i = 0; i < maxeilvt; i++) { + v = apic_read(APIC_EILVTn(i)); + seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v); + } + } +#endif /* CONFIG_X86_LOCAL_APIC */ seq_printf(seq, "\n MSR\t:\n"); } -- cgit v1.2.3 From cec6be6d1069d697beb490bbb40a290d5ff554a2 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 11 May 2009 17:41:40 +0400 Subject: x86: apic: Fixmap apic address even if apic disabled In case if apic were disabled by boot option we still need read_apic operation. So fixmap a fake apic area if needed. [ Impact: fix boot crash ] Signed-off-by: Cyrill Gorcunov Cc: yinghai@kernel.org Cc: eswierk@aristanetworks.com LKML-Reference: <20090511134140.GH4624@lenovo> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 0e6543fafb50..07cffc1214cb 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1587,13 +1587,6 @@ void __init init_apic_mappings(void) } else apic_phys = mp_lapic_addr; - /* lets check if we may NOP'ify apic operations */ - if (!cpu_has_apic) { - pr_info("APIC: disable apic facility\n"); - apic_disable(); - return; - } - /* * acpi lapic path already maps that address in * acpi_register_lapic_address() @@ -1602,7 +1595,15 @@ void __init init_apic_mappings(void) set_fixmap_nocache(FIX_APIC_BASE, apic_phys); apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, apic_phys); + + /* lets check if we may NOP'ify apic operations */ + if (!cpu_has_apic) { + pr_info("APIC: disable apic facility\n"); + apic_disable(); + return; + } + /* * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). -- cgit v1.2.3