From 326ed6a9bcf8d451a6d714d10c8b0f40941a3ed3 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 25 Jul 2011 11:02:11 +0000 Subject: powerpc: mtspr/mtmsr should take an unsigned long Add a cast in case the caller passes in a different type, as it would if mtspr/mtmsr were functions. Previously, if a 64-bit type was passed in on 32-bit, GCC would bind the constraint to a pair of registers, and would substitute the first register in the pair in the asm code. This corresponds to the upper half of the 64-bit register, which is generally not the desired behavior. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index e8aaf6fce38b..9561e6016ec6 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1024,13 +1024,16 @@ #define mtmsrd(v) __mtmsrd((v), 0) #define mtmsr(v) mtmsrd(v) #else -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v) : "memory") +#define mtmsr(v) asm volatile("mtmsr %0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") #endif #define mfspr(rn) ({unsigned long rval; \ asm volatile("mfspr %0," __stringify(rn) \ : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)\ +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ + : "r" ((unsigned long)(v)) \ : "memory") #ifdef __powerpc64__ -- cgit v1.2.3 From 26ee97672eaee9725bd7d66c3964579c4af7037d Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 25 Jul 2011 11:04:36 +0000 Subject: powerpc: Return the_cpu_ spec from identify_cpu Commit af9eef3c7b1ed004c378c89b87642f4937337d50 caused cpu_setup to see the_cpu_spec, rather than the source struct. However, on 32-bit, the return value of identify_cpu was being used for feature fixups, and identify_cpu was returning the source struct. So if cpu_setup patches the feature bits, the update won't affect the fixups. Signed-off-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9fb933248ab6..fa44ff538861 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -2051,7 +2051,8 @@ static struct cpu_spec __initdata cpu_specs[] = { static struct cpu_spec the_cpu_spec; -static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) +static struct cpu_spec * __init setup_cpu_spec(unsigned long offset, + struct cpu_spec *s) { struct cpu_spec *t = &the_cpu_spec; struct cpu_spec old; @@ -2114,6 +2115,8 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) t->cpu_setup(offset, t); } #endif /* CONFIG_PPC64 || CONFIG_BOOKE */ + + return t; } struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) @@ -2124,10 +2127,8 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) s = PTRRELOC(s); for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) { - if ((pvr & s->pvr_mask) == s->pvr_value) { - setup_cpu_spec(offset, s); - return s; - } + if ((pvr & s->pvr_mask) == s->pvr_value) + return setup_cpu_spec(offset, s); } BUG(); -- cgit v1.2.3 From 966728dd88b4026ec58fee169ccceaeaf56ef120 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 25 Jul 2011 20:47:07 +0000 Subject: powerpc: Fix device tree claim code I have a box that fails in OF during boot with: DEFAULT CATCH!, exception-handler=fff00400 at %SRR0: 49424d2c4c6f6768 %SRR1: 800000004000b002 ie "IBM,Logh". OF got corrupted with a device tree string. Looking at make_room and alloc_up, we claim the first chunk (1 MB) but we never claim any more. mem_end is always set to alloc_top which is the top of our available address space, guaranteeing we will never call alloc_up and claim more memory. Also alloc_up wasn't setting alloc_bottom to the bottom of the available address space. This doesn't help the box to boot, but we at least fail with an obvious error. We could relocate the device tree in a future patch. Signed-off-by: Anton Blanchard Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index c016033ba78d..3b22142c40df 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1020,7 +1020,7 @@ static unsigned long __init alloc_up(unsigned long size, unsigned long align) } if (addr == 0) return 0; - RELOC(alloc_bottom) = addr; + RELOC(alloc_bottom) = addr + size; prom_debug(" -> %x\n", addr); prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); @@ -1834,7 +1834,7 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, chunk = alloc_up(room, 0); if (chunk == 0) prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); + *mem_end = chunk + room; } ret = (void *)*mem_start; @@ -2053,7 +2053,7 @@ static void __init flatten_device_tree(void) mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); if (mem_start == 0) prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); + mem_end = mem_start + room; /* Get root of tree */ root = call_prom("peer", 1, 1, (phandle)0); -- cgit v1.2.3 From fbafd728151ccc8665584bde78deb03dbb9ef055 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 25 Jul 2011 20:47:51 +0000 Subject: powerpc: Clean up some panic messages in prom_init Add a newline to the panic messages in make_room. Also fix a comment that suggested our chunk size is 4Mb. It's 1MB. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 3b22142c40df..a909f4e9343b 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1830,10 +1830,12 @@ static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, if (room > DEVTREE_CHUNK_SIZE) room = DEVTREE_CHUNK_SIZE; if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); + prom_panic("No memory for flatten_device_tree " + "(no room)\n"); chunk = alloc_up(room, 0); if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); + prom_panic("No memory for flatten_device_tree " + "(claim failed)\n"); *mem_end = chunk + room; } @@ -2042,7 +2044,7 @@ static void __init flatten_device_tree(void) /* * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size + * few pages), crop to 1MB, as this is our "chunk" size */ room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; if (room > DEVTREE_CHUNK_SIZE) -- cgit v1.2.3 From c113a3aee2b68e311f2bc55f70fe56b64c3a476b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 26 Jul 2011 14:35:46 +0000 Subject: powerpc: Jump label misalignment causes oops at boot I hit an oops at boot on the first instruction of timer_cpu_notify: NIP [c000000000722f88] .timer_cpu_notify+0x0/0x388 The code should look like: c000000000722f78: eb e9 00 30 ld r31,48(r9) c000000000722f7c: 2f bf 00 00 cmpdi cr7,r31,0 c000000000722f80: 40 9e ff 44 bne+ cr7,c000000000722ec4 c000000000722f84: 4b ff ff 74 b c000000000722ef8 c000000000722f88 <.timer_cpu_notify>: c000000000722f88: 7c 08 02 a6 mflr r0 c000000000722f8c: 2f a4 00 07 cmpdi cr7,r4,7 c000000000722f90: fb c1 ff f0 std r30,-16(r1) c000000000722f94: fb 61 ff d8 std r27,-40(r1) But the oops output shows: eb61ffd8 eb81ffe0 eba1ffe8 ebc1fff0 7c0803a6 ebe1fff8 4e800020 00000000 ebe90030 c0000000 00ad0a28 00000000 2fa40007 fbc1fff0 fb61ffd8 So we scribbled over our instructions with c000000000ad0a28, which is an address inside the jump_table ELF section. It turns out the jump_table section is only aligned to 8 bytes but we are aligning our entries within the section to 16 bytes. This means our entries are offset from the table: c000000000acd4a8 <__start___jump_table>: ... c000000000ad0a10: c0 00 00 00 lfs f0,0(0) c000000000ad0a14: 00 70 cd 5c .long 0x70cd5c c000000000ad0a18: c0 00 00 00 lfs f0,0(0) c000000000ad0a1c: 00 70 cd 90 .long 0x70cd90 c000000000ad0a20: c0 00 00 00 lfs f0,0(0) c000000000ad0a24: 00 ac a4 20 .long 0xaca420 And the jump table sort code gets very confused and writes into the wrong spot. Remove the alignment, and also remove the padding since we it saves some space and we shouldn't need it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/jump_label.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h index 1f780b95c0f0..938986e412f1 100644 --- a/arch/powerpc/include/asm/jump_label.h +++ b/arch/powerpc/include/asm/jump_label.h @@ -22,7 +22,6 @@ static __always_inline bool arch_static_branch(struct jump_label_key *key) asm goto("1:\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" - ".align 4\n\t" JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" ".popsection \n\t" : : "i" (key) : : l_yes); @@ -41,7 +40,6 @@ struct jump_entry { jump_label_t code; jump_label_t target; jump_label_t key; - jump_label_t pad; }; #endif /* _ASM_POWERPC_JUMP_LABEL_H */ -- cgit v1.2.3 From bed9a31527af8ff3dfbad62a1a42815cef4baab7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 26 Jul 2011 18:15:03 +0000 Subject: powerpc: pseries: Fix kexec on machines with more than 4TB of RAM On a box with 8TB of RAM the MMU hashtable is 64GB in size. That means we have 4G PTEs. pSeries_lpar_hptab_clear was using a signed int to store the index which will overflow at 2G. Signed-off-by: Anton Blanchard Cc: Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/lpar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index f7205d344efd..225aecf7b425 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -204,7 +204,7 @@ static void pSeries_lpar_hptab_clear(void) unsigned long ptel; } ptes[4]; long lpar_rc; - int i, j; + unsigned long i, j; /* Read in batches of 4, * invalidate only valid entries not in the VRMA -- cgit v1.2.3 From 501d238633a3f9869f4e777b3b281ca7660b7156 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 27 Jul 2011 07:27:21 +0000 Subject: ppc: Remove duplicate definition of PV_POWER7 One definition of PV_POWER7 seems enough to me. Signed-off-by: Peter Zijlstra Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 9561e6016ec6..559da199edb5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1003,7 +1003,6 @@ #define PV_970 0x0039 #define PV_POWER5 0x003A #define PV_POWER5p 0x003B -#define PV_POWER7 0x003F #define PV_970FX 0x003C #define PV_POWER6 0x003E #define PV_POWER7 0x003F -- cgit v1.2.3 From b59a1bfcc2406ea75346977ad016cfe909a762ac Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sat, 30 Jul 2011 10:53:20 +0000 Subject: powerpc/perf: Disable pagefaults during callchain stack read Panic observed on an older kernel when collecting call chains for the context-switch software event: []rb_erase+0x1b4/0x3e8 []__dequeue_entity+0x50/0xe8 []set_next_entity+0x178/0x1bc []pick_next_task_fair+0xb0/0x118 []schedule+0x500/0x614 []rwsem_down_failed_common+0xf0/0x264 []rwsem_down_read_failed+0x34/0x54 []down_read+0x3c/0x54 []do_page_fault+0x114/0x5e8 []handle_page_fault+0xc/0x80 []perf_callchain+0x224/0x31c []perf_prepare_sample+0x240/0x2fc []__perf_event_overflow+0x280/0x398 []perf_swevent_overflow+0x9c/0x10c []perf_swevent_ctx_event+0x1d0/0x230 []do_perf_sw_event+0x84/0xe4 []perf_sw_event_context_switch+0x150/0x1b4 []perf_event_task_sched_out+0x44/0x2d4 []schedule+0x2c0/0x614 []__cond_resched+0x34/0x90 []_cond_resched+0x4c/0x68 []move_page_tables+0xb0/0x418 []setup_arg_pages+0x184/0x2a0 []load_elf_binary+0x394/0x1208 []search_binary_handler+0xe0/0x2c4 []do_execve+0x1bc/0x268 []sys_execve+0x84/0xc8 []ret_from_syscall+0x0/0x3c A page fault occurred walking the callchain while creating a perf sample for the context-switch event. To handle the page fault the mmap_sem is needed, but it is currently held by setup_arg_pages. (setup_arg_pages calls shift_arg_pages with the mmap_sem held. shift_arg_pages then calls move_page_tables which has a cond_resched at the top of its for loop - hitting that cond_resched is what caused the context switch.) This is an extension of Anton's proposed patch: https://lkml.org/lkml/2011/7/24/151 adding case for 32-bit ppc. Tested on the system that first generated the panic and then again with latest kernel using a PPC VM. I am not able to test the 64-bit path - I do not have H/W for it and 64-bit PPC VMs (qemu on Intel) is horribly slow. Signed-off-by: David Ahern Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/perf_callchain.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c index d05ae4204bbf..564c1d8bdb5c 100644 --- a/arch/powerpc/kernel/perf_callchain.c +++ b/arch/powerpc/kernel/perf_callchain.c @@ -154,8 +154,12 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret) ((unsigned long)ptr & 7)) return -EFAULT; - if (!__get_user_inatomic(*ret, ptr)) + pagefault_disable(); + if (!__get_user_inatomic(*ret, ptr)) { + pagefault_enable(); return 0; + } + pagefault_enable(); return read_user_stack_slow(ptr, ret, 8); } @@ -166,8 +170,12 @@ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) ((unsigned long)ptr & 3)) return -EFAULT; - if (!__get_user_inatomic(*ret, ptr)) + pagefault_disable(); + if (!__get_user_inatomic(*ret, ptr)) { + pagefault_enable(); return 0; + } + pagefault_enable(); return read_user_stack_slow(ptr, ret, 4); } @@ -294,11 +302,17 @@ static inline int current_is_64bit(void) */ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret) { + int rc; + if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) || ((unsigned long)ptr & 3)) return -EFAULT; - return __get_user_inatomic(*ret, ptr); + pagefault_disable(); + rc = __get_user_inatomic(*ret, ptr); + pagefault_enable(); + + return rc; } static inline void perf_callchain_user_64(struct perf_callchain_entry *entry, -- cgit v1.2.3 From 8aa6d359298ad284a202dc43f103e2f8100a6e82 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 31 Jul 2011 19:27:35 +0000 Subject: powerpc: Move kdump default base address to half RMO size on 64bit We are seeing boot failures on some very large boxes even with commit b5416ca9f824 (powerpc: Move kdump default base address to 64MB on 64bit). This patch halves the RMO so both kernels get about the same amount of RMO memory. On large machines this region will be at least 256MB, so each kernel will get 128MB. We cap it at 256MB (small SLB size) since some early allocations need to be in the bolted SLB region. We could relax this on machines with 1TB SLBs in a future patch. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/kdump.h | 10 ---------- arch/powerpc/kernel/machine_kexec.c | 10 +++++++--- 2 files changed, 7 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index 6857af58b02e..bffd062adf79 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -3,17 +3,7 @@ #include -/* - * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere. - * To keep enough space in the RMO for the first stage kernel on 64bit, we - * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place - * the second stage at 32MB. - */ -#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64) -#define KDUMP_KERNELBASE 0x4000000 -#else #define KDUMP_KERNELBASE 0x2000000 -#endif /* How many bytes to reserve at zero for kdump. The reserve limit should * be greater or equal to the trampoline's end address. diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 6658a1589955..9ce1672afb59 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -136,12 +136,16 @@ void __init reserve_crashkernel(void) crashk_res.start = KDUMP_KERNELBASE; #else if (!crashk_res.start) { +#ifdef CONFIG_PPC64 /* - * unspecified address, choose a region of specified size - * can overlap with initrd (ignoring corruption when retained) - * ppc64 requires kernel and some stacks to be in first segemnt + * On 64bit we split the RMO in half but cap it at half of + * a small SLB (128MB) since the crash kernel needs to place + * itself and some stacks to be in the first segment. */ + crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2)); +#else crashk_res.start = KDUMP_KERNELBASE; +#endif } crash_base = PAGE_ALIGN(crashk_res.start); -- cgit v1.2.3 From 53876e387d962f7f37747150f33f2aa920a7b20c Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 31 Jul 2011 19:30:04 +0000 Subject: powerpc: Lack of ibm,io-events not that important! The ibm,io-events code is a bit verbose with its error messages. Reverse the reporting so we only print when we successfully enable I/O event interrupts. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/io_event_irq.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/io_event_irq.c b/arch/powerpc/platforms/pseries/io_event_irq.c index c829e6067d54..2c4dd1fb8333 100644 --- a/arch/powerpc/platforms/pseries/io_event_irq.c +++ b/arch/powerpc/platforms/pseries/io_event_irq.c @@ -212,17 +212,15 @@ static int __init ioei_init(void) struct device_node *np; ioei_check_exception_token = rtas_token("check-exception"); - if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) { - pr_warning("IO Event IRQ not supported on this system !\n"); + if (ioei_check_exception_token == RTAS_UNKNOWN_SERVICE) return -ENODEV; - } + np = of_find_node_by_path("/event-sources/ibm,io-events"); if (np) { request_event_sources_irqs(np, ioei_interrupt, "IO_EVENT"); + pr_info("IBM I/O event interrupts enabled\n"); of_node_put(np); } else { - pr_err("io_event_irq: No ibm,io-events on system! " - "IO Event interrupt disabled.\n"); return -ENODEV; } return 0; -- cgit v1.2.3 From 2c740c5841ba69aed216fdf7180f06e693165a7b Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Wed, 3 Aug 2011 08:55:54 +0000 Subject: powerpc/kvm: Fix build errors with older toolchains On a box with gcc 4.3.2, I see errors like: arch/powerpc/kvm/book3s_hv_rmhandlers.S:1254: Error: Unrecognized opcode: stxvd2x arch/powerpc/kvm/book3s_hv_rmhandlers.S:1316: Error: Unrecognized opcode: lxvd2x Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 6dd33581a228..de2950135e6e 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1251,7 +1251,7 @@ BEGIN_FTR_SECTION reg = 0 .rept 32 li r6,reg*16+VCPU_VSRS - stxvd2x reg,r6,r3 + STXVD2X(reg,r6,r3) reg = reg + 1 .endr FTR_SECTION_ELSE @@ -1313,7 +1313,7 @@ BEGIN_FTR_SECTION reg = 0 .rept 32 li r7,reg*16+VCPU_VSRS - lxvd2x reg,r7,r4 + LXVD2X(reg,r7,r4) reg = reg + 1 .endr FTR_SECTION_ELSE -- cgit v1.2.3 From 643ba4e3077f8d1c6b1cd5cc9ea3406198a833ff Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 4 Aug 2011 17:23:58 +0000 Subject: powerpc: Make KVM_GUEST default to n KVM_GUEST adds a 1 MB array to the kernel (kvm_tmp) which grew my kernel enough to cause it to fail to boot. Dynamically allocating or reducing the size of this array is a good idea, but in the meantime I think it makes sense to make KVM_GUEST default to n in order to minimise surprises. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index d0af7fb2f344..b9ba86191aed 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -24,7 +24,7 @@ source "arch/powerpc/platforms/wsp/Kconfig" config KVM_GUEST bool "KVM Guest support" - default y + default n ---help--- This option enables various optimizations for running under the KVM hypervisor. Overhead for the kernel when not running inside KVM should -- cgit v1.2.3 From b1301797f30370c430244979671978fc232f4533 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 25 Jul 2011 01:46:32 +0000 Subject: powerpc/pseries: Fix kexec on recent firmware versions Recent versions of firmware will fail to unmap the virtual processor area if we have a dispatch trace log registered. This causes kexec to fail. If a trace log is registered this patch unregisters it before the SLB shadow and virtual processor areas, fixing the problem. The address argument is ignored by firmware on unregister so we may as well remove it. Signed-off-by: Anton Blanchard Cc: Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/dtl.c | 2 +- arch/powerpc/platforms/pseries/kexec.c | 11 +++++++++++ arch/powerpc/platforms/pseries/plpar_wrappers.h | 4 ++-- 3 files changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index e9190073bb97..0e8656370063 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -181,7 +181,7 @@ static void dtl_stop(struct dtl *dtl) lppaca_of(dtl->cpu).dtl_enable_mask = 0x0; - unregister_dtl(hwcpu, __pa(dtl->buf)); + unregister_dtl(hwcpu); } static u64 dtl_current_index(struct dtl *dtl) diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index 54cf3a4aa16b..1118cb79f9e3 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -26,6 +26,17 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) /* Don't risk a hypervisor call if we're crashing */ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { unsigned long addr; + int ret; + + if (get_lppaca()->dtl_enable_mask) { + ret = unregister_dtl(hard_smp_processor_id()); + if (ret) { + pr_err("WARNING: DTL deregistration for cpu " + "%d (hw %d) failed with %d\n", + smp_processor_id(), + hard_smp_processor_id(), ret); + } + } addr = __pa(get_slb_shadow()); if (unregister_slb_shadow(hard_smp_processor_id(), addr)) diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 4bf21207d7d3..a6921aec2d6f 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -73,9 +73,9 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) return vpa_call(0x3, cpu, vpa); } -static inline long unregister_dtl(unsigned long cpu, unsigned long vpa) +static inline long unregister_dtl(unsigned long cpu) { - return vpa_call(0x6, cpu, vpa); + return vpa_call(0x6, cpu, 0); } static inline long register_dtl(unsigned long cpu, unsigned long vpa) -- cgit v1.2.3 From 711ef84e80ec6f937ad59c7a00490421a5c92867 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 25 Jul 2011 01:46:33 +0000 Subject: powerpc/pseries: Cleanup VPA registration and deregistration errors Make the VPA, SLB shadow and DTL registration and deregistration functions print consistent messages on error. I needed the firmware error code while chasing a kexec bug but we weren't printing it. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/kexec.c | 19 +++++++++++-------- arch/powerpc/platforms/pseries/lpar.c | 17 ++++++++--------- arch/powerpc/platforms/pseries/setup.c | 5 +++-- 3 files changed, 22 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index 1118cb79f9e3..3bae8bd7db3b 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -39,17 +39,20 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) } addr = __pa(get_slb_shadow()); - if (unregister_slb_shadow(hard_smp_processor_id(), addr)) - printk("SLB shadow buffer deregistration of " - "cpu %u (hw_cpu_id %d) failed\n", + ret = unregister_slb_shadow(hard_smp_processor_id(), addr); + if (ret) { + pr_err("WARNING: SLB shadow buffer deregistration " + "for cpu %d (hw %d) failed with %d\n", smp_processor_id(), - hard_smp_processor_id()); + hard_smp_processor_id(), ret); + } addr = __pa(get_lppaca()); - if (unregister_vpa(hard_smp_processor_id(), addr)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); + ret = unregister_vpa(hard_smp_processor_id(), addr); + if (ret) { + pr_err("WARNING: VPA deregistration for cpu %d " + "(hw %d) failed with %d\n", smp_processor_id(), + hard_smp_processor_id(), ret); } } } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 225aecf7b425..c9a29dae8c05 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -67,9 +67,8 @@ void vpa_init(int cpu) ret = register_vpa(hwcpu, addr); if (ret) { - printk(KERN_ERR "WARNING: vpa_init: VPA registration for " - "cpu %d (hw %d) of area %lx returns %ld\n", - cpu, hwcpu, addr, ret); + pr_err("WARNING: VPA registration for cpu %d (hw %d) of area " + "%lx failed with %ld\n", cpu, hwcpu, addr, ret); return; } /* @@ -80,10 +79,9 @@ void vpa_init(int cpu) if (firmware_has_feature(FW_FEATURE_SPLPAR)) { ret = register_slb_shadow(hwcpu, addr); if (ret) - printk(KERN_ERR - "WARNING: vpa_init: SLB shadow buffer " - "registration for cpu %d (hw %d) of area %lx " - "returns %ld\n", cpu, hwcpu, addr, ret); + pr_err("WARNING: SLB shadow buffer registration for " + "cpu %d (hw %d) of area %lx failed with %ld\n", + cpu, hwcpu, addr, ret); } /* @@ -100,8 +98,9 @@ void vpa_init(int cpu) dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; ret = register_dtl(hwcpu, __pa(dtl)); if (ret) - pr_warn("DTL registration failed for cpu %d (%ld)\n", - cpu, ret); + pr_err("WARNING: DTL registration of cpu %d (hw %d) " + "failed with %ld\n", smp_processor_id(), + hwcpu, ret); lppaca_of(cpu).dtl_enable_mask = 2; } } diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index d00e52926b71..0969fd98c4fa 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -324,8 +324,9 @@ static int alloc_dispatch_logs(void) dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES; ret = register_dtl(hard_smp_processor_id(), __pa(dtl)); if (ret) - pr_warn("DTL registration failed for boot cpu %d (%d)\n", - smp_processor_id(), ret); + pr_err("WARNING: DTL registration of cpu %d (hw %d) failed " + "with %d\n", smp_processor_id(), + hard_smp_processor_id(), ret); get_paca()->lppaca_ptr->dtl_enable_mask = 2; return 0; -- cgit v1.2.3 From 598c8231ab54cfcc8ea6f52882cefee98b129bd1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 25 Jul 2011 01:46:34 +0000 Subject: powerpc/pseries: Simplify vpa deregistration functions The VPA, SLB shadow and DTL degistration functions do not need an address, so simplify things and remove it. Also cleanup pseries_kexec_cpu_down a bit by storing the cpu IDs in local variables. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/hotplug-cpu.c | 4 ++-- arch/powerpc/platforms/pseries/kexec.c | 20 ++++++++------------ arch/powerpc/platforms/pseries/plpar_wrappers.h | 8 ++++---- 3 files changed, 14 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index bc0288501f17..83a3ca2fd282 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -135,7 +135,7 @@ static void pseries_mach_cpu_die(void) get_lppaca()->idle = 0; if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { - unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + unregister_slb_shadow(hwcpu); /* * Call to start_secondary_resume() will not return. @@ -150,7 +150,7 @@ static void pseries_mach_cpu_die(void) WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE); set_cpu_current_state(cpu, CPU_STATE_OFFLINE); - unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + unregister_slb_shadow(hwcpu); rtas_stop_self(); /* Should never get here... */ diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index 3bae8bd7db3b..7d94bdc63d50 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -25,34 +25,30 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) { /* Don't risk a hypervisor call if we're crashing */ if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long addr; int ret; + int cpu = smp_processor_id(); + int hwcpu = hard_smp_processor_id(); if (get_lppaca()->dtl_enable_mask) { - ret = unregister_dtl(hard_smp_processor_id()); + ret = unregister_dtl(hwcpu); if (ret) { pr_err("WARNING: DTL deregistration for cpu " "%d (hw %d) failed with %d\n", - smp_processor_id(), - hard_smp_processor_id(), ret); + cpu, hwcpu, ret); } } - addr = __pa(get_slb_shadow()); - ret = unregister_slb_shadow(hard_smp_processor_id(), addr); + ret = unregister_slb_shadow(hwcpu); if (ret) { pr_err("WARNING: SLB shadow buffer deregistration " "for cpu %d (hw %d) failed with %d\n", - smp_processor_id(), - hard_smp_processor_id(), ret); + cpu, hwcpu, ret); } - addr = __pa(get_lppaca()); - ret = unregister_vpa(hard_smp_processor_id(), addr); + ret = unregister_vpa(hwcpu); if (ret) { pr_err("WARNING: VPA deregistration for cpu %d " - "(hw %d) failed with %d\n", smp_processor_id(), - hard_smp_processor_id(), ret); + "(hw %d) failed with %d\n", cpu, hwcpu, ret); } } } diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index a6921aec2d6f..41c24c146d6a 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -53,9 +53,9 @@ static inline long vpa_call(unsigned long flags, unsigned long cpu, return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); } -static inline long unregister_vpa(unsigned long cpu, unsigned long vpa) +static inline long unregister_vpa(unsigned long cpu) { - return vpa_call(0x5, cpu, vpa); + return vpa_call(0x5, cpu, 0); } static inline long register_vpa(unsigned long cpu, unsigned long vpa) @@ -63,9 +63,9 @@ static inline long register_vpa(unsigned long cpu, unsigned long vpa) return vpa_call(0x1, cpu, vpa); } -static inline long unregister_slb_shadow(unsigned long cpu, unsigned long vpa) +static inline long unregister_slb_shadow(unsigned long cpu) { - return vpa_call(0x7, cpu, vpa); + return vpa_call(0x7, cpu, 0); } static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) -- cgit v1.2.3 From 883a805d617baca1c01172dc1d35e37829ffed0c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 5 Aug 2011 15:59:40 +1000 Subject: powerpc/4xx: Fix build of PCI code on 405 Commit 112d1fe9f7715db423ffeec5ac1beccff6093dc4 "powerpc/4xx: Add check_link to struct ppc4xx_pciex_hwops" inadvertently broke 405 builds due to some functions being over protected by an ifdef CONFIG_44x. Move them back out. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/ppc4xx_pci.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index a59ba96d2c21..dbfe96bc878a 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -655,8 +655,6 @@ struct ppc4xx_pciex_hwops static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops; -#ifdef CONFIG_44x - static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, unsigned int sdr_offset, unsigned int mask, @@ -688,6 +686,7 @@ static int __init ppc4xx_pciex_port_reset_sdr(struct ppc4xx_pciex_port *port) return 0; } + static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) { printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); @@ -718,6 +717,8 @@ static void __init ppc4xx_pciex_check_link_sdr(struct ppc4xx_pciex_port *port) printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); } +#ifdef CONFIG_44x + /* Check various reset bits of the 440SPe PCIe core */ static int __init ppc440spe_pciex_check_reset(struct device_node *np) { -- cgit v1.2.3 From 81210c2062cf98bf625bcd487334c89b0fce5a82 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 5 Aug 2011 16:01:20 +1000 Subject: powerpc: Fix build without CONFIG_PCI Commit fea80311a939a746533a6d7e7c3183729d6a3faf "iomap: make IOPORT/PCI mapping functions conditional" Broke powerpc build without CONFIG_PCI as we would still define pci_iomap(), which overlaps with the new empty inline in the headers. Make our implementation conditional on CONFIG_PCI Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/iomap.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 1577434f4088..faca64accac1 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -117,6 +117,7 @@ void ioport_unmap(void __iomem *addr) EXPORT_SYMBOL(ioport_map); EXPORT_SYMBOL(ioport_unmap); +#ifdef CONFIG_PCI void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) { resource_size_t start = pci_resource_start(dev, bar); @@ -143,6 +144,7 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) return; iounmap(addr); } +#endif /* CONFIG_PCI */ EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); -- cgit v1.2.3 From a85fe3fce84335f83be17a7659bfbb3a71dc2fc4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 11 Aug 2011 01:15:44 +1000 Subject: powerpc: Really fix build without CONFIG_PCI Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/iomap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index faca64accac1..b25f6325fc70 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -144,7 +144,7 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) return; iounmap(addr); } -#endif /* CONFIG_PCI */ EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); +#endif /* CONFIG_PCI */ -- cgit v1.2.3