From f2bd77c8f3b8c108bc460e779585854fbd2d8c59 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:55:48 +0800 Subject: ARM: tegra: enable Cortex-A15 erratum 798181 The commit 93dc688 (ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)) introduced a workaround for Cortex-A15 erratum 798181. Enable it for Tegra114. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index ef3a8da49b2d..add345e6a6bb 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -59,6 +59,7 @@ config ARCH_TEGRA_3x_SOC config ARCH_TEGRA_114_SOC bool "Enable support for Tegra114 family" select HAVE_ARM_ARCH_TIMER + select ARM_ERRATA_798181 select ARM_GIC select ARM_L1_CACHE_SHIFT_6 select CPU_V7 -- cgit v1.2.3 From a99d34b506f746e607c96767d616553a5cc14758 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 19 Jul 2013 17:25:23 +0800 Subject: Revert "ARM: tegra: add cpu_disable for hotplug" This reverts commit 510bb59 "ARM: tegra: add cpu_disable for hotplug". The Tegra114 support CPU0 hotplug function in HW physically, but it needs other software to make it work normally after we add CPU idle power down mode support. So remove them for now. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/common.h | 1 - arch/arm/mach-tegra/hotplug.c | 11 ----------- arch/arm/mach-tegra/platsmp.c | 1 - 3 files changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 32f8eb3fe344..5900cc44f780 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); -extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a52c10e0a857..d07f152b275f 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -46,17 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } -int tegra_cpu_disable(unsigned int cpu) -{ - switch (tegra_chip_id) { - case TEGRA20: - case TEGRA30: - return cpu == 0 ? -EPERM : 0; - default: - return 0; - } -} - void __init tegra_hotplug_init(void) { if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 24db4ac428ae..554aedc98c9f 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -196,6 +196,5 @@ struct smp_operations tegra_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, - .cpu_disable = tegra_cpu_disable, #endif }; -- cgit v1.2.3 From 7e8b15dbc392cf3097f2d2e6dfbbf2e97318c553 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 19 Jul 2013 17:25:24 +0800 Subject: ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/irq.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 0de4eed1493d..1a74d562dca1 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,10 +18,12 @@ */ #include +#include #include #include #include #include +#include #include #include @@ -65,6 +67,7 @@ static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +static void __iomem *tegra_gic_cpu_base; #endif bool tegra_pending_sgi(void) @@ -213,8 +216,43 @@ int tegra_legacy_irq_syscore_init(void) return 0; } + +static int tegra_gic_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_PM_ENTER: + writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block tegra_gic_notifier_block = { + .notifier_call = tegra_gic_notifier, +}; + +static const struct of_device_id tegra114_dt_gic_match[] __initconst = { + { .compatible = "arm,cortex-a15-gic" }, + { } +}; + +static void tegra114_gic_cpu_pm_registration(void) +{ + struct device_node *dn; + + dn = of_find_matching_node(NULL, tegra114_dt_gic_match); + if (!dn) + return; + + tegra_gic_cpu_base = of_iomap(dn, 1); + + cpu_pm_register_notifier(&tegra_gic_notifier_block); +} #else #define tegra_set_wake NULL +static void tegra114_gic_cpu_pm_registration(void) { } #endif void __init tegra_init_irq(void) @@ -252,4 +290,6 @@ void __init tegra_init_irq(void) if (!of_have_populated_dt()) gic_init(0, 29, distbase, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + + tegra114_gic_cpu_pm_registration(); } -- cgit v1.2.3 From 1b9e6b2745621984b4aad49b0386814815fb15e7 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 19 Jul 2013 17:25:25 +0800 Subject: ARM: tegra114: add low level support for CPU idle powered-down mode The flow controller would take care the power sequence when CPU idle in powered-down mode. It powered gate the CPU when CPU runs into WFI instruction. And wake up the CPU when event be triggered. The sequence is below. * setting wfi bitmap for the CPU as the halt event in the FLOW_CTRL_CPU_HALT_REG to monitor the CPU running into WFI,then power gate it * setting IRQ and FIQ as wake up event to wake up CPU when event triggered Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/flowctrl.h | 2 ++ arch/arm/mach-tegra/sleep-tegra30.S | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 7a29bae799a7..e56a950920f6 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -28,6 +28,8 @@ #define FLOW_CTRL_SCLK_RESUME (1 << 27) #define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) #define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) +#define FLOW_CTRL_HALT_GIC_IRQ (1 << 9) +#define FLOW_CTRL_HALT_GIC_FIQ (1 << 8) #define FLOW_CTRL_CPU0_CSR 0x8 #define FLOW_CTRL_CSR_INTR_FLAG (1 << 15) #define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index ada8821b48be..5877f268fa97 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -99,6 +99,8 @@ flow_ctrl_setting_for_lp2: cmp r10, #TEGRA30 moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 movne r3, #FLOW_CTRL_WAITEVENT + orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ + orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ flow_ctrl_done: cmp r10, #TEGRA30 str r3, [r2] -- cgit v1.2.3 From 3045cb33eb6081a937d9a2873f5fb88d9fcb7900 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 19 Jul 2013 17:25:26 +0800 Subject: ARM: tegra114: cpuidle: add powered-down state This supports CPU core power down on each CPU when CPU idle. When CPU go into this state, it saves it's context and needs a proper configuration in flow controller to power gate the CPU when CPU runs into WFI instruction. And the CPU also needs to set the IRQ as CPU power down idle wake up event in flow controller. Cc: Daniel Lezcano Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/cpuidle-tegra114.c | 51 +++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 1d1c6023f4a2..e0b87300243d 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -17,15 +17,64 @@ #include #include #include +#include +#include #include +#include +#include + +#include "pm.h" +#include "sleep.h" + +#ifdef CONFIG_PM_SLEEP +#define TEGRA114_MAX_STATES 2 +#else +#define TEGRA114_MAX_STATES 1 +#endif + +#ifdef CONFIG_PM_SLEEP +static int tegra114_idle_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + local_fiq_disable(); + + tegra_set_cpu_in_lp2(); + cpu_pm_enter(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(); + + local_fiq_enable(); + + return index; +} +#endif static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .state_count = 1, + .state_count = TEGRA114_MAX_STATES, .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra114_idle_power_down, + .exit_latency = 500, + .target_residency = 1000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif }, }; -- cgit v1.2.3 From c04c77540a4f996ee94d0240bbae3a7512febd37 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:37 +0800 Subject: ARM: tegra: do v7_invalidate_l1 only when CPU is Cortex-A9 The v7_invalidate_l1 was used for the L1 cache that come out from reset in a undefined state. This is no need for Cortex-A15. We do it for A9 only. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/headsmp.S | 3 ++- arch/arm/mach-tegra/reset-handler.S | 7 +++++-- 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 045c16f2dd51..2072e7322c39 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -6,6 +6,7 @@ .section ".text.head", "ax" ENTRY(tegra_secondary_startup) - bl v7_invalidate_l1 + check_cpu_part_num 0xc09, r8, r9 + bleq v7_invalidate_l1 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 39dc9e7834f3..75285a3b816e 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -40,9 +40,11 @@ * re-enabling sdram. * * r6: SoC ID + * r8: CPU part number */ ENTRY(tegra_resume) - bl v7_invalidate_l1 + check_cpu_part_num 0xc09, r8, r9 + bleq v7_invalidate_l1 cpu_id r0 tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 @@ -70,7 +72,8 @@ no_cpu0_chk: str r1, [r2] 1: - check_cpu_part_num 0xc09, r8, r9 + mov32 r9, 0xc09 + cmp r8, r9 bne not_ca9 #ifdef CONFIG_HAVE_ARM_SCU /* enable SCU */ -- cgit v1.2.3 From ac2527bfc21739b77d687df1bfc4e973103fef7b Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:38 +0800 Subject: ARM: tegra: add a flag for tegra_disable_clean_inv_dcache to do LoUIS or ALL Adding a flag for tegra_disable_clean_inv_dcache to flush cache as LoUIS or ALL. After this patch, the v7_flush_dcache_louis is used for CPU hotplug and CPU suspend in CPU power down (e.g. CPU idle power-down mode) case. And the v7_flush_dcache_all is used for CPU cluster power down (e.g. suspend to LP2 mode). Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/hotplug.c | 2 +- arch/arm/mach-tegra/sleep-tegra20.S | 1 + arch/arm/mach-tegra/sleep-tegra30.S | 1 + arch/arm/mach-tegra/sleep.S | 7 ++++++- arch/arm/mach-tegra/sleep.h | 6 +++++- 5 files changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index d07f152b275f..04de2e860923 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu) void __ref tegra_cpu_die(unsigned int cpu) { /* Clean L1 data cache */ - tegra_disable_clean_inv_dcache(); + tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); /* Shut down the current CPU. */ tegra_hotplug_shutdown(); diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index e3f2417c420e..f87721d6e50d 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -191,6 +191,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_LOUIS bl tegra_disable_clean_inv_dcache mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 5877f268fa97..6744161475b2 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -137,6 +137,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) mov r7, lr /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_LOUIS bl tegra_disable_clean_inv_dcache /* Powergate this CPU. */ diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 9daaef26b0f6..6d6600dcbfe2 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -56,7 +56,9 @@ ENTRY(tegra_disable_clean_inv_dcache) isb /* Flush the D-cache */ - bl v7_flush_dcache_louis + cmp r0, #TEGRA_FLUSH_CACHE_ALL + blne v7_flush_dcache_louis + bleq v7_flush_dcache_all /* Trun off coherency */ exit_smp r4, r5 @@ -73,9 +75,12 @@ ENDPROC(tegra_disable_clean_inv_dcache) * tegra?_tear_down_cpu */ ENTRY(tegra_sleep_cpu_finish) + mov r4, r0 /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 mov32 r6, tegra_tear_down_cpu ldr r1, [r6] add r1, r1, r0 diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 98b7da698f2b..e907e406d129 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -41,6 +41,10 @@ #define CPU_NOT_RESETTABLE 0 #endif +/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */ +#define TEGRA_FLUSH_CACHE_LOUIS 0 +#define TEGRA_FLUSH_CACHE_ALL 1 + #ifdef __ASSEMBLY__ /* returns the offset of the flow controller halt register for a cpu */ .macro cpu_to_halt_reg rd, rcpu @@ -144,7 +148,7 @@ void tegra_pen_lock(void); void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); -void tegra_disable_clean_inv_dcache(void); +void tegra_disable_clean_inv_dcache(u32 flag); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_shutdown(void); -- cgit v1.2.3 From 2f5aaa3d2703256d37ae75818c495783d4ad0543 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:39 +0800 Subject: ARM: tegra: set up the correct L2 data RAM latency for Cortex-A15 When there is a cluster power down cycle in suspend, we need to set up the correct L2 RAM data RAM latency to make L2 cache work correctly. This is only needed for cluster 0 and needs to be done in tegra_resume before the cache is enabled. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/reset-handler.S | 1 + arch/arm/mach-tegra/sleep.S | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 75285a3b816e..34614bdf3f5b 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -45,6 +45,7 @@ ENTRY(tegra_resume) check_cpu_part_num 0xc09, r8, r9 bleq v7_invalidate_l1 + blne tegra_init_l2_for_a15 cpu_id r0 tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 6d6600dcbfe2..8388113419fd 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -68,6 +68,28 @@ ENDPROC(tegra_disable_clean_inv_dcache) #endif #ifdef CONFIG_PM_SLEEP +/* + * tegra_init_l2_for_a15 + * + * set up the correct L2 cache data RAM latency + */ +ENTRY(tegra_init_l2_for_a15) + mrc p15, 0, r0, c0, c0, 5 + ubfx r0, r0, #8, #4 + tst r0, #1 @ only need for cluster 0 + bne _exit_init_l2_a15 + + mrc p15, 0x1, r0, c9, c0, 2 + and r0, r0, #7 + cmp r0, #2 + bicne r0, r0, #7 + orrne r0, r0, #2 + mcrne p15, 0x1, r0, c9, c0, 2 +_exit_init_l2_a15: + + mov pc, lr +ENDPROC(tegra_init_l2_for_a15) + /* * tegra_sleep_cpu_finish(unsigned long v2p) * -- cgit v1.2.3 From ccea4bc654a9d5330c4488acadc3abfa4ea7ebbf Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:40 +0800 Subject: ARM: tegra: add low level code for Tegra114 cluster power down When the CPU cluster power down, the vGIC is powered down too. The flow controller needs to monitor the legacy interrupt controller to wake up CPU. So setting up the appropriate wake up event in flow controller. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/flowctrl.h | 2 ++ arch/arm/mach-tegra/sleep-tegra30.S | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index e56a950920f6..de0acb9ee323 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -28,6 +28,8 @@ #define FLOW_CTRL_SCLK_RESUME (1 << 27) #define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) #define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) +#define FLOW_CTRL_HALT_LIC_IRQ (1 << 11) +#define FLOW_CTRL_HALT_LIC_FIQ (1 << 10) #define FLOW_CTRL_HALT_GIC_IRQ (1 << 9) #define FLOW_CTRL_HALT_GIC_FIQ (1 << 8) #define FLOW_CTRL_CPU0_CSR 0x8 diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 6744161475b2..ecad4eace941 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -175,8 +175,12 @@ tegra30_enter_sleep: orr r0, r0, #FLOW_CTRL_CSR_ENABLE str r0, [r6, r2] + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT - orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ + cpu_to_halt_reg r2, r1 str r0, [r6, r2] dsb -- cgit v1.2.3 From 3f1be81eef0de7193aae389663f50d38df3a3788 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:41 +0800 Subject: ARM: tegra: shut off the CPU rail when the last CPU in suspend When the last CPU core in suspend, the CPU power rail can be turned off by setting flags to flow controller. Then the flow controller will inform PMC to turn off the CPU rail when the last CPU goes into suspend. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/flowctrl.h | 5 +++++ arch/arm/mach-tegra/pmc.c | 16 +++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index de0acb9ee323..c89aac60a143 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -35,6 +35,11 @@ #define FLOW_CTRL_CPU0_CSR 0x8 #define FLOW_CTRL_CSR_INTR_FLAG (1 << 15) #define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14) +#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL (1 << 13) +#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU (1 << 12) +#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \ + FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \ + FLOW_CTRL_CSR_ENABLE_EXT_CRAIL) #define FLOW_CTRL_CSR_ENABLE (1 << 0) #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index eb3fa4aee0e4..8345fcdcc9d5 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -21,6 +21,7 @@ #include #include +#include "flowctrl.h" #include "fuse.h" #include "pm.h" #include "pmc.h" @@ -195,13 +196,26 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) void tegra_pmc_pm_set(enum tegra_suspend_mode mode) { - u32 reg; + u32 reg, csr_reg; unsigned long rate = 0; reg = tegra_pmc_readl(PMC_CTRL); reg |= TEGRA_POWER_CPU_PWRREQ_OE; reg &= ~TEGRA_POWER_EFFECT_LP0; + switch (tegra_chip_id) { + case TEGRA20: + case TEGRA30: + break; + default: + /* Turn off CRAIL */ + csr_reg = flowctrl_read_cpu_csr(0); + csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; + csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; + flowctrl_write_cpu_csr(0, csr_reg); + break; + } + switch (mode) { case TEGRA_SUSPEND_LP2: rate = clk_get_rate(tegra_pclk); -- cgit v1.2.3 From b573ad9f19ad56938a66c95fbc5122b77951cd5d Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:42 +0800 Subject: ARM: tegra: hook tegra_tear_down_cpu function Hooking tegra_tear_down_cpu for Tegra114 for supporting cluster power down when CPU cluster suspneded in LP2. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 94e69bee3da5..19cf360c7bdd 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -52,7 +52,9 @@ static void tegra_tear_down_cpu_init(void) tegra_tear_down_cpu = tegra20_tear_down_cpu; break; case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) tegra_tear_down_cpu = tegra30_tear_down_cpu; break; } -- cgit v1.2.3 From dd6fe9a927eaaa98f70b44464a810e6e4d33318c Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:43 +0800 Subject: ARM: tegra: flowctrl: add support for cpu_suspend_enter/exit The flow controller can help CPU to go into suspend mode (powered-down state). When CPU goes into powered-down state, it needs some careful settings before getting into and after leaving. The enter and exit functions do that by configuring appropriate mode for flow controller. For Tegra114, the setting is compatible with Tegra30. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/flowctrl.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index b477ef310dcd..5348543382bf 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -86,6 +86,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ @@ -123,6 +124,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ -- cgit v1.2.3 From 9c0c4b43b194521e2cbf7064fbe35b8ce9e42149 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Wed, 3 Jul 2013 17:50:45 +0800 Subject: ARM: tegra: remove the limitation that Tegra114 can't support suspend The Tegra114 can support suspend function now, removing the limitation. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/pm.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 19cf360c7bdd..11bfce9473c1 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -173,10 +173,6 @@ void tegra_idle_lp2_last(void) enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode) { - /* Tegra114 didn't support any suspending mode yet. */ - if (tegra_chip_id == TEGRA114) - return TEGRA_SUSPEND_NONE; - /* * The Tegra devices only support suspending to LP2 currently. */ -- cgit v1.2.3 From 20984c44b5a08620778ea14fa5807489170fd5ca Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 6 Aug 2013 14:38:51 -0600 Subject: ARM: tegra: unify Tegra's Kconfig a bit more Move all common select clauses from ARCH_TEGRA_*_SOC to ARCH_TEGRA to eliminate duplication. The USB-related selects all should have been common too, but were missing from Tegra114 previously. Move these to ARCH_TEGRA too. The latter fixes a build break when only Tegra114 support was enabled, but not Tegra20 or Tegra30 support. Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Kconfig | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index add345e6a6bb..e963db273339 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,18 +2,24 @@ config ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_GIC select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL select SOC_BUS select SPARSE_IRQ + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY select USE_OF help This enables support for NVIDIA Tegra based systems. @@ -27,15 +33,9 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_720789 select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA20 select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -44,14 +44,8 @@ config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -60,10 +54,7 @@ config ARCH_TEGRA_114_SOC bool "Enable support for Tegra114 family" select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 - select ARM_GIC select ARM_L1_CACHE_SHIFT_6 - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA114 help Support for NVIDIA Tegra T114 processor family, based on the -- cgit v1.2.3 From 4287d824f265451cd10f6d20266b27a207a6cdd7 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 9 Aug 2013 22:27:06 +0200 Subject: PCI: use weak functions for MSI arch-specific functions Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni Acked-by: Bjorn Helgaas Acked-by: Benjamin Herrenschmidt Tested-by: Daniel Price Tested-by: Thierry Reding Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner Cc: Ingo Molnar Cc: H. Peter Anvin Cc: x86@kernel.org Cc: Russell King Cc: Tony Luck Cc: Fenghua Yu Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: David S. Miller Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf Signed-off-by: Jason Cooper --- arch/mips/include/asm/pci.h | 5 ----- arch/powerpc/include/asm/pci.h | 5 ----- arch/s390/include/asm/pci.h | 4 ---- arch/x86/include/asm/pci.h | 30 -------------------------- arch/x86/kernel/x86_init.c | 24 +++++++++++++++++++++ drivers/pci/msi.c | 48 +++++++++++++++++++++--------------------- include/linux/msi.h | 8 ++++++- 7 files changed, 55 insertions(+), 69 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index fa8e0aa250ca..f194c08bd057 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -136,11 +136,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } -#ifdef CONFIG_CPU_CAVIUM_OCTEON -/* MSI arch hook for OCTEON */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#endif - extern char * (*pcibios_plat_setup)(char *str); #ifdef CONFIG_OF diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 6653f2743c4e..95145a15c708 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -113,11 +113,6 @@ extern int pci_domain_nr(struct pci_bus *bus); /* Decide whether to display the domain number in /proc */ extern int pci_proc_domain(struct pci_bus *bus); -/* MSI arch hooks */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#define arch_teardown_msi_irqs arch_teardown_msi_irqs -#define arch_msi_check_device arch_msi_check_device - struct vm_area_struct; /* Map a range of PCI memory or I/O space for a device into user space */ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 6e577ba0e5da..262b91bb8811 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -21,10 +21,6 @@ void pci_iounmap(struct pci_dev *, void __iomem *); int pci_domain_nr(struct pci_bus *); int pci_proc_domain(struct pci_bus *); -/* MSI arch hooks */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#define arch_teardown_msi_irqs arch_teardown_msi_irqs - #define ZPCI_BUS_NR 0 /* default bus number */ #define ZPCI_DEVFN 0 /* default device number */ diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index d9e9e6c7ed32..7d7443283a9d 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -100,29 +100,6 @@ static inline void early_quirks(void) { } extern void pci_iommu_alloc(void); #ifdef CONFIG_PCI_MSI -/* MSI arch specific hooks */ -static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - return x86_msi.setup_msi_irqs(dev, nvec, type); -} - -static inline void x86_teardown_msi_irqs(struct pci_dev *dev) -{ - x86_msi.teardown_msi_irqs(dev); -} - -static inline void x86_teardown_msi_irq(unsigned int irq) -{ - x86_msi.teardown_msi_irq(irq); -} -static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq) -{ - x86_msi.restore_msi_irqs(dev, irq); -} -#define arch_setup_msi_irqs x86_setup_msi_irqs -#define arch_teardown_msi_irqs x86_teardown_msi_irqs -#define arch_teardown_msi_irq x86_teardown_msi_irq -#define arch_restore_msi_irqs x86_restore_msi_irqs /* implemented in arch/x86/kernel/apic/io_apic. */ struct msi_desc; int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); @@ -130,16 +107,9 @@ void native_teardown_msi_irq(unsigned int irq); void native_restore_msi_irqs(struct pci_dev *dev, int irq); int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, unsigned int irq_base, unsigned int irq_offset); -/* default to the implementation in drivers/lib/msi.c */ -#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS -#define HAVE_DEFAULT_MSI_RESTORE_IRQS -void default_teardown_msi_irqs(struct pci_dev *dev); -void default_restore_msi_irqs(struct pci_dev *dev, int irq); #else #define native_setup_msi_irqs NULL #define native_teardown_msi_irq NULL -#define default_teardown_msi_irqs NULL -#define default_restore_msi_irqs NULL #endif #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 45a14dbbddaf..5587f991d111 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -107,6 +107,8 @@ struct x86_platform_ops x86_platform = { }; EXPORT_SYMBOL_GPL(x86_platform); + +#if defined(CONFIG_PCI_MSI) struct x86_msi_ops x86_msi = { .setup_msi_irqs = native_setup_msi_irqs, .compose_msi_msg = native_compose_msi_msg, @@ -116,6 +118,28 @@ struct x86_msi_ops x86_msi = { .setup_hpet_msi = default_setup_hpet_msi, }; +/* MSI arch specific hooks */ +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + return x86_msi.setup_msi_irqs(dev, nvec, type); +} + +void arch_teardown_msi_irqs(struct pci_dev *dev) +{ + x86_msi.teardown_msi_irqs(dev); +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + x86_msi.teardown_msi_irq(irq); +} + +void arch_restore_msi_irqs(struct pci_dev *dev, int irq) +{ + x86_msi.restore_msi_irqs(dev, irq); +} +#endif + struct x86_io_apic_ops x86_io_apic_ops = { .init = native_io_apic_init_mappings, .read = native_io_apic_read, diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index aca7578b05e5..823c3861c4d8 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -30,20 +30,21 @@ static int pci_msi_enable = 1; /* Arch hooks */ -#ifndef arch_msi_check_device -int arch_msi_check_device(struct pci_dev *dev, int nvec, int type) +int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) { - return 0; + return -EINVAL; } -#endif -#ifndef arch_setup_msi_irqs -# define arch_setup_msi_irqs default_setup_msi_irqs -# define HAVE_DEFAULT_MSI_SETUP_IRQS -#endif +void __weak arch_teardown_msi_irq(unsigned int irq) +{ +} -#ifdef HAVE_DEFAULT_MSI_SETUP_IRQS -int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type) +{ + return 0; +} + +int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { struct msi_desc *entry; int ret; @@ -65,14 +66,11 @@ int default_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return 0; } -#endif - -#ifndef arch_teardown_msi_irqs -# define arch_teardown_msi_irqs default_teardown_msi_irqs -# define HAVE_DEFAULT_MSI_TEARDOWN_IRQS -#endif -#ifdef HAVE_DEFAULT_MSI_TEARDOWN_IRQS +/* + * We have a default implementation available as a separate non-weak + * function, as it is used by the Xen x86 PCI code + */ void default_teardown_msi_irqs(struct pci_dev *dev) { struct msi_desc *entry; @@ -89,14 +87,12 @@ void default_teardown_msi_irqs(struct pci_dev *dev) arch_teardown_msi_irq(entry->irq + i); } } -#endif -#ifndef arch_restore_msi_irqs -# define arch_restore_msi_irqs default_restore_msi_irqs -# define HAVE_DEFAULT_MSI_RESTORE_IRQS -#endif +void __weak arch_teardown_msi_irqs(struct pci_dev *dev) +{ + return default_teardown_msi_irqs(dev); +} -#ifdef HAVE_DEFAULT_MSI_RESTORE_IRQS void default_restore_msi_irqs(struct pci_dev *dev, int irq) { struct msi_desc *entry; @@ -114,7 +110,11 @@ void default_restore_msi_irqs(struct pci_dev *dev, int irq) if (entry) write_msi_msg(irq, &entry->msg); } -#endif + +void __weak arch_restore_msi_irqs(struct pci_dev *dev, int irq) +{ + return default_restore_msi_irqs(dev, irq); +} static void msi_set_enable(struct pci_dev *dev, int enable) { diff --git a/include/linux/msi.h b/include/linux/msi.h index ee66f3a12fb6..271dfd14a05f 100644 --- a/include/linux/msi.h +++ b/include/linux/msi.h @@ -51,12 +51,18 @@ struct msi_desc { }; /* - * The arch hook for setup up msi irqs + * The arch hooks to setup up msi irqs. Those functions are + * implemented as weak symbols so that they /can/ be overriden by + * architecture specific code if needed. */ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc); void arch_teardown_msi_irq(unsigned int irq); int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); void arch_teardown_msi_irqs(struct pci_dev *dev); int arch_msi_check_device(struct pci_dev* dev, int nvec, int type); +void arch_restore_msi_irqs(struct pci_dev *dev, int irq); + +void default_teardown_msi_irqs(struct pci_dev *dev); +void default_restore_msi_irqs(struct pci_dev *dev, int irq); #endif /* LINUX_MSI_H */ -- cgit v1.2.3 From ebd97be635bff43239f391a49c78b98818c589fe Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 9 Aug 2013 22:27:07 +0200 Subject: PCI: remove ARCH_SUPPORTS_MSI kconfig option Now that we have weak versions for each of the PCI MSI architecture functions, we can actually build the MSI support for all platforms, regardless of whether they provide or not architecture-specific versions of those functions. For this reason, the ARCH_SUPPORTS_MSI hidden kconfig boolean becomes useless, and this patch gets rid of it. Signed-off-by: Thomas Petazzoni Acked-by: Bjorn Helgaas Acked-by: Benjamin Herrenschmidt Tested-by: Daniel Price Tested-by: Thierry Reding Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner Cc: Ingo Molnar Cc: H. Peter Anvin Cc: x86@kernel.org Cc: Russell King Cc: Tony Luck Cc: Fenghua Yu Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: David S. Miller Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf Signed-off-by: Jason Cooper --- arch/arm/Kconfig | 1 - arch/ia64/Kconfig | 1 - arch/mips/Kconfig | 2 -- arch/powerpc/Kconfig | 1 - arch/s390/Kconfig | 1 - arch/sparc/Kconfig | 1 - arch/tile/Kconfig | 1 - arch/x86/Kconfig | 1 - drivers/pci/Kconfig | 4 ---- 9 files changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ba412e02ec0c..b173c1d8721f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -441,7 +441,6 @@ config ARCH_NETX config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU - select ARCH_SUPPORTS_MSI select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 5a768ad8e893..098602b939a9 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -9,7 +9,6 @@ config IA64 select PCI if (!IA64_HP_SIM) select ACPI if (!IA64_HP_SIM) select PM if (!IA64_HP_SIM) - select ARCH_SUPPORTS_MSI select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4758a8fd3e99..00b26986cd05 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -726,7 +726,6 @@ config CAVIUM_OCTEON_SOC select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE select HW_HAS_PCI - select ARCH_SUPPORTS_MSI select ZONE_DMA32 select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI @@ -762,7 +761,6 @@ config NLM_XLR_BOARD select CEVT_R4K select CSRC_R4K select IRQ_CPU - select ARCH_SUPPORTS_MSI select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3bf72cd2c8fc..183a16509e8f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -727,7 +727,6 @@ config PCI default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON default PCI_QSPAN if !4xx && !CPM2 && 8xx - select ARCH_SUPPORTS_MSI select GENERIC_PCI_IOMAP help Find out whether your system includes a PCI bus. PCI is the name of diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 22f75b504f7f..e9982a353b55 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -428,7 +428,6 @@ menuconfig PCI bool "PCI support" default n depends on 64BIT - select ARCH_SUPPORTS_MSI select PCI_MSI help Enable PCI support. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index a00cbd356db5..1570ad2802b3 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -52,7 +52,6 @@ config SPARC32 config SPARC64 def_bool 64BIT - select ARCH_SUPPORTS_MSI select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_GRAPH_FP_TEST diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 24565a7ffe6d..74dff908a70f 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -380,7 +380,6 @@ config PCI select PCI_DOMAINS select GENERIC_PCI_IOMAP select TILE_GXIO_TRIO if TILEGX - select ARCH_SUPPORTS_MSI if TILEGX select PCI_MSI if TILEGX ---help--- Enable PCI root complex support, so PCIe endpoint devices can diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b32ebf92b0ce..5db62ef37804 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2014,7 +2014,6 @@ menu "Bus options (PCI etc.)" config PCI bool "PCI support" default y - select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) ---help--- Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 81944fb73116..b6a99f7a9b20 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -1,13 +1,9 @@ # # PCI configuration # -config ARCH_SUPPORTS_MSI - bool - config PCI_MSI bool "Message Signaled Interrupts (MSI and MSI-X)" depends on PCI - depends on ARCH_SUPPORTS_MSI help This allows device drivers to enable MSI (Message Signaled Interrupts). Message Signaled Interrupts enable a device to -- cgit v1.2.3 From 9d981ea5d43af79e1d7942d3d28e0f609db8b5d4 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 9 Aug 2013 22:27:12 +0200 Subject: ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci Some PCI drivers may need to adjust the pci_bus structure after it has been allocated by the Linux PCI core. The PCI core allows architectures to implement the pcibios_add_bus() and pcibios_remove_bus() for this purpose. This commit therefore extends the hw_pci and pci_sys_data structures of the ARM PCI core to allow PCI drivers to register ->add_bus() and ->remove_bus() in hw_pci, which will get called when a bus is added or removed from the system. This will be used for example by the Marvell PCIe driver to connect a particular PCI bus with its corresponding MSI chip to handle Message Signaled Interrupts. Signed-off-by: Thomas Petazzoni Reviewed-by: Thierry Reding Acked-by: Russell King Tested-by: Daniel Price Tested-by: Thierry Reding Signed-off-by: Jason Cooper --- arch/arm/include/asm/mach/pci.h | 4 ++++ arch/arm/kernel/bios32.c | 16 ++++++++++++++++ 2 files changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a1c90d7feb0e..454d642a4070 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -36,6 +36,8 @@ struct hw_pci { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); }; /* @@ -63,6 +65,8 @@ struct pci_sys_data { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 261fcc826169..1ec9c8701c26 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void pcibios_add_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->add_bus) + sys->add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->remove_bus) + sys->remove_bus(bus); +} + /* * Swizzle the device pin each time we cross a bridge. If a platform does * not provide a swizzle function, we perform the standard PCI swizzling. @@ -464,6 +478,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; sys->align_resource = hw->align_resource; + sys->add_bus = hw->add_bus; + sys->remove_bus = hw->remove_bus; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) -- cgit v1.2.3 From 5b795d051c61862cebf4f1d55edab6e9b3383b44 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:00 +0800 Subject: ARM: tegra: add common resume handling code for LP1 resuming Add support to the Tegra CPU reset vector to detect whether the CPU is resuming from LP1 suspend state. If it is, branch to the LP1-specific resume code. When Tegra enters the LP1 suspend state, the SDRAM controller is placed into a self-refresh state. For this reason, we must place the LP1 resume code into IRAM, so that it is accessible before SDRAM access has been re-enabled. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/iomap.h | 2 ++ arch/arm/mach-tegra/reset-handler.S | 13 +++++++++++++ arch/arm/mach-tegra/reset.c | 2 ++ 3 files changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 399fbca27102..f2bdcb4eac94 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -24,6 +24,8 @@ #define TEGRA_IRAM_BASE 0x40000000 #define TEGRA_IRAM_SIZE SZ_256K +#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) + #define TEGRA_HOST1X_BASE 0x50000000 #define TEGRA_HOST1X_SIZE 0x24000 diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 34614bdf3f5b..f527b2c2dea7 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -182,6 +182,19 @@ after_errata: 1: #endif + /* Waking up from LP1? */ + ldr r8, [r12, #RESET_DATA(MASK_LP1)] + tst r8, r11 @ if in_lp1 + beq __is_not_lp1 + cmp r10, #0 + bne __die @ only CPU0 can be here + ldr lr, [r12, #RESET_DATA(STARTUP_LP1)] + cmp lr, #0 + bleq __die @ no LP1 startup handler + THUMB( add lr, lr, #1 ) @ switch to Thumb mode + bx lr +__is_not_lp1: + /* Waking up from LP2? */ ldr r9, [r12, #RESET_DATA(MASK_LP2)] tst r9, r11 @ if in_lp2 diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 1ac434e0068f..fd0bbf8a6c94 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -81,6 +81,8 @@ void __init tegra_cpu_reset_handler_init(void) #endif #ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] = + TEGRA_IRAM_CODE_AREA; __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = virt_to_phys((void *)tegra_resume); #endif -- cgit v1.2.3 From 444f9a8030ecda8dedd374fc3efed03d9f20e9cb Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:01 +0800 Subject: ARM: tegra: config the polarity of the request of sys clock When suspending to LP1 mode, the SYSCLK will be clock gated. And different board may have different polarity of the request of SYSCLK, this patch configure the polarity from the DT for the board. Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/pmc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 8345fcdcc9d5..03e640512e3e 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -27,6 +27,8 @@ #include "pmc.h" #include "sleep.h" +#define TEGRA_POWER_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */ +#define TEGRA_POWER_SYSCLK_OE (1 << 11) /* system clock enable */ #define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ #define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ #define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ @@ -238,6 +240,20 @@ void tegra_pmc_suspend_init(void) reg = tegra_pmc_readl(PMC_CTRL); reg |= TEGRA_POWER_CPU_PWRREQ_OE; tegra_pmc_writel(reg, PMC_CTRL); + + reg = tegra_pmc_readl(PMC_CTRL); + + if (!pmc_pm_data.sysclkreq_high) + reg |= TEGRA_POWER_SYSCLK_POLARITY; + else + reg &= ~TEGRA_POWER_SYSCLK_POLARITY; + + /* configure the output polarity while the request is tristated */ + tegra_pmc_writel(reg, PMC_CTRL); + + /* now enable the request */ + reg |= TEGRA_POWER_SYSCLK_OE; + tegra_pmc_writel(reg, PMC_CTRL); } #endif -- cgit v1.2.3 From 95872f427eca73b19ac9466c25afd9bb876dc1aa Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:03 +0800 Subject: ARM: tegra: add common LP1 suspend support The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are clock gated and SDRAM in self-refresh mode. That means the low level LP1 suspending and resuming code couldn't be run on DRAM and the CPU must switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator. The LP1 low level handling code need to be moved to IRAM area first. And marking the LP1 mask for indicating the Tegra device is in LP1. The CPU power timer needs to be re-calculated based on 32KHz that was originally based on PCLK. When resuming from LP1, the LP1 reset handler will resume PLLs and then put DRAM to normal mode. Then jumping to the "tegra_resume" that will restore full context before back to kernel. The "tegra_resume" handler was expected to be found in PMC_SCRATCH41 register. This is common LP1 procedures for Tegra, so we do these jobs mainly in this patch: * moving LP1 low level handling code to IRAM * marking LP1 mask * copying the physical address of "tegra_resume" to PMC_SCRATCH41 * re-calculate the CPU power timer based on 32KHz Signed-off-by: Joseph Lo [swarren, replaced IRAM_CODE macro with IO_ADDRESS(TEGRA_IRAM_CODE_AREA)] Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/pm.c | 110 ++++++++++++++++++++++++++++++++++++++++++-- arch/arm/mach-tegra/pm.h | 7 +++ arch/arm/mach-tegra/pmc.c | 21 +++++++++ arch/arm/mach-tegra/pmc.h | 3 ++ arch/arm/mach-tegra/reset.h | 4 ++ 5 files changed, 140 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 11bfce9473c1..10689924a6a7 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -37,12 +37,18 @@ #include "reset.h" #include "flowctrl.h" #include "fuse.h" +#include "pm.h" #include "pmc.h" #include "sleep.h" #ifdef CONFIG_PM_SLEEP static DEFINE_SPINLOCK(tegra_lp2_lock); +static u32 iram_save_size; +static void *iram_save_addr; +struct tegra_lp1_iram tegra_lp1_iram; void (*tegra_tear_down_cpu)(void); +void (*tegra_sleep_core_finish)(unsigned long v2p); +static int (*tegra_sleep_func)(unsigned long v2p); static void tegra_tear_down_cpu_init(void) { @@ -174,14 +180,78 @@ enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode) { /* - * The Tegra devices only support suspending to LP2 currently. + * The Tegra devices support suspending to LP1 or lower currently. */ - if (mode > TEGRA_SUSPEND_LP2) - return TEGRA_SUSPEND_LP2; + if (mode > TEGRA_SUSPEND_LP1) + return TEGRA_SUSPEND_LP1; return mode; } +static int tegra_sleep_core(unsigned long v2p) +{ + setup_mm_for_reboot(); + tegra_sleep_core_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +/* + * tegra_lp1_iram_hook + * + * Hooking the address of LP1 reset vector and SDRAM self-refresh code in + * SDRAM. These codes not be copied to IRAM in this fuction. We need to + * copy these code to IRAM before LP0/LP1 suspend and restore the content + * of IRAM after resume. + */ +static bool tegra_lp1_iram_hook(void) +{ + if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr) + return false; + + iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr; + iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL); + if (!iram_save_addr) + return false; + + return true; +} + +static bool tegra_sleep_core_init(void) +{ + if (!tegra_sleep_core_finish) + return false; + + return true; +} + +static void tegra_suspend_enter_lp1(void) +{ + tegra_pmc_suspend(); + + /* copy the reset vector & SDRAM shutdown code into IRAM */ + memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA), + iram_save_size); + memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr, + iram_save_size); + + *((u32 *)tegra_cpu_lp1_mask) = 1; +} + +static void tegra_suspend_exit_lp1(void) +{ + tegra_pmc_resume(); + + /* restore IRAM */ + memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr, + iram_save_size); + + *(u32 *)tegra_cpu_lp1_mask = 0; +} + static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { [TEGRA_SUSPEND_NONE] = "none", [TEGRA_SUSPEND_LP2] = "LP2", @@ -205,6 +275,9 @@ static int __cpuinit tegra_suspend_enter(suspend_state_t state) suspend_cpu_complex(); switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_enter_lp1(); + break; case TEGRA_SUSPEND_LP2: tegra_set_cpu_in_lp2(); break; @@ -212,9 +285,12 @@ static int __cpuinit tegra_suspend_enter(suspend_state_t state) break; } - cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_exit_lp1(); + break; case TEGRA_SUSPEND_LP2: tegra_clear_cpu_in_lp2(); break; @@ -235,12 +311,36 @@ static const struct platform_suspend_ops tegra_suspend_ops = { void __init tegra_init_suspend(void) { - if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (mode == TEGRA_SUSPEND_NONE) return; tegra_tear_down_cpu_init(); tegra_pmc_suspend_init(); + if (mode >= TEGRA_SUSPEND_LP1) { + if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) { + pr_err("%s: unable to allocate memory for SDRAM" + "self-refresh -- LP0/LP1 unavailable\n", + __func__); + tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2); + mode = TEGRA_SUSPEND_LP2; + } + } + + /* set up sleep function for cpu_suspend */ + switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_sleep_func = tegra_sleep_core; + break; + case TEGRA_SUSPEND_LP2: + tegra_sleep_func = tegra_sleep_cpu; + break; + default: + break; + } + suspend_set_ops(&tegra_suspend_ops); } #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 94c4b9d9077c..478706edebbe 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -23,6 +23,13 @@ #include "pmc.h" +struct tegra_lp1_iram { + void *start_addr; + void *end_addr; +}; +extern struct tegra_lp1_iram tegra_lp1_iram; +extern void (*tegra_sleep_core_finish)(unsigned long v2p); + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index 03e640512e3e..8acb881f7cfe 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -196,6 +196,24 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) return pmc_pm_data.suspend_mode; } +void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode) +{ + if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE) + return; + + pmc_pm_data.suspend_mode = mode; +} + +void tegra_pmc_suspend(void) +{ + tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41); +} + +void tegra_pmc_resume(void) +{ + tegra_pmc_writel(0x0, PMC_SCRATCH41); +} + void tegra_pmc_pm_set(enum tegra_suspend_mode mode) { u32 reg, csr_reg; @@ -219,6 +237,9 @@ void tegra_pmc_pm_set(enum tegra_suspend_mode mode) } switch (mode) { + case TEGRA_SUSPEND_LP1: + rate = 32768; + break; case TEGRA_SUSPEND_LP2: rate = clk_get_rate(tegra_pclk); break; diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index e1c2df272f7d..549f8c7b762c 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -28,6 +28,9 @@ enum tegra_suspend_mode { #ifdef CONFIG_PM_SLEEP enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); +void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode); +void tegra_pmc_suspend(void); +void tegra_pmc_resume(void); void tegra_pmc_pm_set(enum tegra_suspend_mode mode); void tegra_pmc_suspend_init(void); #endif diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index c90d8e9c4ad2..76a93434c6ee 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -39,6 +39,10 @@ void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); #ifdef CONFIG_PM_SLEEP +#define tegra_cpu_lp1_mask \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \ + (u32)__tegra_cpu_reset_handler_start))) #define tegra_cpu_lp2_mask \ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ -- cgit v1.2.3 From e7a932b1961c3936c7ae5b8d1628f39dc50a746d Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:04 +0800 Subject: ARM: tegra: add LP1 suspend support for Tegra30 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLX. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Scott Williams Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/pm-tegra30.c | 34 +++ arch/arm/mach-tegra/pm.c | 18 ++ arch/arm/mach-tegra/pm.h | 3 + arch/arm/mach-tegra/sleep-tegra30.S | 492 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/sleep.S | 8 +- arch/arm/mach-tegra/sleep.h | 8 + 7 files changed, 560 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-tegra/pm-tegra30.c (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 98b184efc110..d341980d5ca9 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o endif obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c new file mode 100644 index 000000000000..8fa326d6ff1a --- /dev/null +++ b/arch/arm/mach-tegra/pm-tegra30.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include + +#include "pm.h" + +#ifdef CONFIG_PM_SLEEP +extern u32 tegra30_iram_start, tegra30_iram_end; +extern void tegra30_sleep_core_finish(unsigned long); + +void tegra30_lp1_iram_hook(void) +{ + tegra_lp1_iram.start_addr = &tegra30_iram_start; + tegra_lp1_iram.end_addr = &tegra30_iram_end; +} + +void tegra30_sleep_core_init(void) +{ + tegra_sleep_core_finish = tegra30_sleep_core_finish; +} +#endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 10689924a6a7..7739d5586cb7 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -209,6 +209,15 @@ static int tegra_sleep_core(unsigned long v2p) */ static bool tegra_lp1_iram_hook(void) { + switch (tegra_chip_id) { + case TEGRA30: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + tegra30_lp1_iram_hook(); + break; + default: + break; + } + if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr) return false; @@ -222,6 +231,15 @@ static bool tegra_lp1_iram_hook(void) static bool tegra_sleep_core_init(void) { + switch (tegra_chip_id) { + case TEGRA30: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + tegra30_sleep_core_init(); + break; + default: + break; + } + if (!tegra_sleep_core_finish) return false; diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 478706edebbe..803bd5382257 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -30,6 +30,9 @@ struct tegra_lp1_iram { extern struct tegra_lp1_iram tegra_lp1_iram; extern void (*tegra_sleep_core_finish)(unsigned long v2p); +void tegra30_lp1_iram_hook(void); +void tegra30_sleep_core_init(void); + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index ecad4eace941..2be7f70e19cb 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -18,13 +18,102 @@ #include #include +#include #include "fuse.h" #include "sleep.h" #include "flowctrl.h" +#define EMC_CFG 0xc +#define EMC_ADR_CFG 0x10 +#define EMC_TIMING_CONTROL 0x28 +#define EMC_REFRESH 0x70 +#define EMC_NOP 0xdc +#define EMC_SELF_REF 0xe0 +#define EMC_MRW 0xe8 +#define EMC_FBIO_CFG5 0x104 +#define EMC_AUTO_CAL_CONFIG 0x2a4 +#define EMC_AUTO_CAL_INTERVAL 0x2a8 +#define EMC_AUTO_CAL_STATUS 0x2ac +#define EMC_REQ_CTRL 0x2b0 +#define EMC_CFG_DIG_DLL 0x2bc +#define EMC_EMC_STATUS 0x2b4 +#define EMC_ZCAL_INTERVAL 0x2e0 +#define EMC_ZQ_CAL 0x2ec +#define EMC_XM2VTTGENPADCTRL 0x310 +#define EMC_XM2VTTGENPADCTRL2 0x314 + +#define PMC_CTRL 0x0 +#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */ + +#define PMC_PLLP_WB0_OVERRIDE 0xf8 +#define PMC_IO_DPD_REQ 0x1b8 +#define PMC_IO_DPD_STATUS 0x1bc + +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_SCLK_BURST 0x28 +#define CLK_RESET_SCLK_DIVIDER 0x2c + +#define CLK_RESET_PLLC_BASE 0x80 +#define CLK_RESET_PLLC_MISC 0x8c +#define CLK_RESET_PLLM_BASE 0x90 +#define CLK_RESET_PLLM_MISC 0x9c +#define CLK_RESET_PLLP_BASE 0xa0 +#define CLK_RESET_PLLP_MISC 0xac +#define CLK_RESET_PLLA_BASE 0xb0 +#define CLK_RESET_PLLA_MISC 0xbc +#define CLK_RESET_PLLX_BASE 0xe0 +#define CLK_RESET_PLLX_MISC 0xe4 + +#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4 + +#define MSELECT_CLKM (0x3 << 30) + +#define LOCK_DELAY 50 /* safety delay after lock is detected */ + #define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */ +.macro emc_device_mask, rd, base + ldr \rd, [\base, #EMC_ADR_CFG] + tst \rd, #0x1 + moveq \rd, #(0x1 << 8) @ just 1 device + movne \rd, #(0x3 << 8) @ 2 devices +.endm + +.macro emc_timing_update, rd, base + mov \rd, #1 + str \rd, [\base, #EMC_TIMING_CONTROL] +1001: + ldr \rd, [\base, #EMC_EMC_STATUS] + tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear + bne 1001b +.endm + +.macro pll_enable, rd, r_car_base, pll_base, pll_misc + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + orreq \rd, \rd, #(1 << 30) + streq \rd, [\r_car_base, #\pll_base] + /* Enable lock detector */ + .if \pll_misc + ldr \rd, [\r_car_base, #\pll_misc] + bic \rd, \rd, #(1 << 18) + str \rd, [\r_car_base, #\pll_misc] + ldr \rd, [\r_car_base, #\pll_misc] + ldr \rd, [\r_car_base, #\pll_misc] + orr \rd, \rd, #(1 << 18) + str \rd, [\r_car_base, #\pll_misc] + .endif +.endm + +.macro pll_locked, rd, r_car_base, pll_base +1: + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 27) + beq 1b +.endm + #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra30_hotplug_shutdown(void) @@ -128,6 +217,41 @@ ENDPROC(tegra30_cpu_shutdown) #endif #ifdef CONFIG_PM_SLEEP +/* + * tegra30_sleep_core_finish(unsigned long v2p) + * + * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to + * tegra30_tear_down_core in IRAM + */ +ENTRY(tegra30_sleep_core_finish) + /* Flush, disable the L1 data cache and exit SMP */ + bl tegra_disable_clean_inv_dcache + + /* + * Preload all the address literals that are needed for the + * CPU power-gating process, to avoid loading from SDRAM which + * are not supported once SDRAM is put into self-refresh. + * LP0 / LP1 use physical address, since the MMU needs to be + * disabled before putting SDRAM into self-refresh to avoid + * memory access due to page table walks. + */ + mov32 r4, TEGRA_PMC_BASE + mov32 r5, TEGRA_CLK_RESET_BASE + mov32 r6, TEGRA_FLOW_CTRL_BASE + mov32 r7, TEGRA_TMRUS_BASE + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + + mov32 r0, tegra30_tear_down_core + mov32 r1, tegra30_iram_start + sub r0, r0, r1 + mov32 r1, TEGRA_IRAM_CODE_AREA + add r0, r0, r1 + + mov pc, r3 +ENDPROC(tegra30_sleep_core_finish) + /* * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) * @@ -158,6 +282,273 @@ ENTRY(tegra30_tear_down_cpu) b tegra30_enter_sleep ENDPROC(tegra30_tear_down_cpu) +/* START OF ROUTINES COPIED TO IRAM */ + .align L1_CACHE_SHIFT + .globl tegra30_iram_start +tegra30_iram_start: + +/* + * tegra30_lp1_reset + * + * reset vector for LP1 restore; copied into IRAM during suspend. + * Brings the system back up to a safe staring point (SDRAM out of + * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX, + * system clock running on the same PLL that it suspended at), and + * jumps to tegra_resume to restore virtual addressing. + * The physical address of tegra_resume expected to be stored in + * PMC_SCRATCH41. + * + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + */ +ENTRY(tegra30_lp1_reset) + /* + * The CPU and system bus are running at 32KHz and executing from + * IRAM when this code is executed; immediately switch to CLKM and + * enable PLLP, PLLM, PLLC, PLLA and PLLX. + */ + mov32 r0, TEGRA_CLK_RESET_BASE + + mov r1, #(1 << 28) + str r1, [r0, #CLK_RESET_SCLK_BURST] + str r1, [r0, #CLK_RESET_CCLK_BURST] + mov r1, #0 + str r1, [r0, #CLK_RESET_CCLK_DIVIDER] + str r1, [r0, #CLK_RESET_SCLK_DIVIDER] + + /* enable PLLM via PMC */ + mov32 r2, TEGRA_PMC_BASE + ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + orr r1, r1, #(1 << 12) + str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC + pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC + pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC + pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC + pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC + + pll_locked r1, r0, CLK_RESET_PLLM_BASE + pll_locked r1, r0, CLK_RESET_PLLP_BASE + pll_locked r1, r0, CLK_RESET_PLLA_BASE + pll_locked r1, r0, CLK_RESET_PLLC_BASE + pll_locked r1, r0, CLK_RESET_PLLX_BASE + + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #LOCK_DELAY + wait_until r1, r7, r3 + + adr r5, tegra30_sdram_pad_save + + ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT + str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT] + + ldr r4, [r5, #0x1C] @ restore SCLK_BURST + str r4, [r0, #CLK_RESET_SCLK_BURST] + + mov32 r4, ((1 << 28) | (0x8)) @ burst policy is PLLX + str r4, [r0, #CLK_RESET_CCLK_BURST] + + /* Restore pad power state to normal */ + ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS + mvn r1, r1 + bic r1, r1, #(1 << 31) + orr r1, r1, #(1 << 30) + str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF + + mov32 r0, TEGRA_EMC_BASE @ r0 reserved for emc base + + ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL + str r1, [r0, #EMC_XM2VTTGENPADCTRL] + ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2 + str r1, [r0, #EMC_XM2VTTGENPADCTRL2] + ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL + str r1, [r0, #EMC_AUTO_CAL_INTERVAL] + + /* Relock DLL */ + ldr r1, [r0, #EMC_CFG_DIG_DLL] + orr r1, r1, #(1 << 30) @ set DLL_RESET + str r1, [r0, #EMC_CFG_DIG_DLL] + + emc_timing_update r1, r0 + + ldr r1, [r0, #EMC_AUTO_CAL_CONFIG] + orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE + str r1, [r0, #EMC_AUTO_CAL_CONFIG] + +emc_wait_auto_cal_onetime: + ldr r1, [r0, #EMC_AUTO_CAL_STATUS] + tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared + bne emc_wait_auto_cal_onetime + + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD + str r1, [r0, #EMC_CFG] + + mov r1, #0 + str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh + mov r1, #1 + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_REFRESH] + + emc_device_mask r1, r0 + +exit_selfrefresh_loop: + ldr r2, [r0, #EMC_EMC_STATUS] + ands r2, r2, r1 + bne exit_selfrefresh_loop + + lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1 + + mov32 r7, TEGRA_TMRUS_BASE + ldr r2, [r0, #EMC_FBIO_CFG5] + + and r2, r2, #3 @ check DRAM_TYPE + cmp r2, #2 + beq emc_lpddr2 + + /* Issue a ZQ_CAL for dev0 - DDR3 */ + mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1 + str r2, [r0, #EMC_ZQ_CAL] + ldr r2, [r7] + add r2, r2, #10 + wait_until r2, r7, r3 + + tst r1, #2 + beq zcal_done + + /* Issue a ZQ_CAL for dev1 - DDR3 */ + mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1 + str r2, [r0, #EMC_ZQ_CAL] + ldr r2, [r7] + add r2, r2, #10 + wait_until r2, r7, r3 + b zcal_done + +emc_lpddr2: + /* Issue a ZQ_CAL for dev0 - LPDDR2 */ + mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB + str r2, [r0, #EMC_MRW] + ldr r2, [r7] + add r2, r2, #1 + wait_until r2, r7, r3 + + tst r1, #2 + beq zcal_done + + /* Issue a ZQ_CAL for dev0 - LPDDR2 */ + mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB + str r2, [r0, #EMC_MRW] + ldr r2, [r7] + add r2, r2, #1 + wait_until r2, r7, r3 + +zcal_done: + mov r1, #0 @ unstall all transactions + str r1, [r0, #EMC_REQ_CTRL] + ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL + str r1, [r0, #EMC_ZCAL_INTERVAL] + ldr r1, [r5, #0x0] @ restore EMC_CFG + str r1, [r0, #EMC_CFG] + + mov32 r0, TEGRA_PMC_BASE + ldr r0, [r0, #PMC_SCRATCH41] + mov pc, r0 @ jump to tegra_resume +ENDPROC(tegra30_lp1_reset) + + .align L1_CACHE_SHIFT +tegra30_sdram_pad_address: + .word TEGRA_EMC_BASE + EMC_CFG @0x0 + .word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4 + .word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8 + .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc + .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10 + .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + +tegra30_sdram_pad_size: + .word tegra30_sdram_pad_size - tegra30_sdram_pad_address + + .type tegra30_sdram_pad_save, %object +tegra30_sdram_pad_save: + .rept (tegra30_sdram_pad_size - tegra30_sdram_pad_address) / 4 + .long 0 + .endr + +/* + * tegra30_tear_down_core + * + * copied into and executed from IRAM + * puts memory in self-refresh for LP0 and LP1 + */ +tegra30_tear_down_core: + bl tegra30_sdram_self_refresh + bl tegra30_switch_cpu_to_clk32k + b tegra30_enter_sleep + +/* + * tegra30_switch_cpu_to_clk32k + * + * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK + * to the 32KHz clock. + * r4 = TEGRA_PMC_BASE + * r5 = TEGRA_CLK_RESET_BASE + * r6 = TEGRA_FLOW_CTRL_BASE + * r7 = TEGRA_TMRUS_BASE + */ +tegra30_switch_cpu_to_clk32k: + /* + * start by jumping to CLKM to safely disable PLLs, then jump to + * CLKS. + */ + mov r0, #(1 << 28) + str r0, [r5, #CLK_RESET_SCLK_BURST] + /* 2uS delay delay between changing SCLK and CCLK */ + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + str r0, [r5, #CLK_RESET_CCLK_BURST] + mov r0, #0 + str r0, [r5, #CLK_RESET_CCLK_DIVIDER] + str r0, [r5, #CLK_RESET_SCLK_DIVIDER] + + /* switch the clock source of mselect to be CLK_M */ + ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT] + orr r0, r0, #MSELECT_CLKM + str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT] + + /* 2uS delay delay between changing SCLK and disabling PLLs */ + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + + /* disable PLLM via PMC in LP1 */ + ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE] + bic r0, r0, #(1 << 12) + str r0, [r4, #PMC_PLLP_WB0_OVERRIDE] + + /* disable PLLP, PLLA, PLLC and PLLX */ + ldr r0, [r5, #CLK_RESET_PLLP_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLP_BASE] + ldr r0, [r5, #CLK_RESET_PLLA_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLA_BASE] + ldr r0, [r5, #CLK_RESET_PLLC_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLC_BASE] + ldr r0, [r5, #CLK_RESET_PLLX_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLX_BASE] + + /* switch to CLKS */ + mov r0, #0 /* brust policy = 32KHz */ + str r0, [r5, #CLK_RESET_SCLK_BURST] + + mov pc, lr + /* * tegra30_enter_sleep * @@ -194,4 +585,105 @@ halted: /* !!!FIXME!!! Implement halt failure handler */ b halted +/* + * tegra30_sdram_self_refresh + * + * called with MMU off and caches disabled + * must be executed from IRAM + * r4 = TEGRA_PMC_BASE + * r5 = TEGRA_CLK_RESET_BASE + * r6 = TEGRA_FLOW_CTRL_BASE + * r7 = TEGRA_TMRUS_BASE + */ +tegra30_sdram_self_refresh: + + adr r2, tegra30_sdram_pad_address + adr r8, tegra30_sdram_pad_save + mov r9, #0 + + ldr r3, tegra30_sdram_pad_size +padsave: + ldr r0, [r2, r9] @ r0 is the addr in the pad_address + + ldr r1, [r0] + str r1, [r8, r9] @ save the content of the addr + + add r9, r9, #4 + cmp r3, r9 + bne padsave +padsave_done: + + dsb + + mov32 r0, TEGRA_EMC_BASE @ r0 reserved for emc base addr + + mov r1, #0 + str r1, [r0, #EMC_ZCAL_INTERVAL] + str r1, [r0, #EMC_AUTO_CAL_INTERVAL] + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 28) + str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF + + emc_timing_update r1, r0 + + ldr r1, [r7] + add r1, r1, #5 + wait_until r1, r7, r2 + +emc_wait_auto_cal: + ldr r1, [r0, #EMC_AUTO_CAL_STATUS] + tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared + bne emc_wait_auto_cal + + mov r1, #3 + str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests + +emcidle: + ldr r1, [r0, #EMC_EMC_STATUS] + tst r1, #4 + beq emcidle + + mov r1, #1 + str r1, [r0, #EMC_SELF_REF] + + emc_device_mask r1, r0 + +emcself: + ldr r2, [r0, #EMC_EMC_STATUS] + and r2, r2, r1 + cmp r2, r1 + bne emcself @ loop until DDR in self-refresh + + /* Put VTTGEN in the lowest power mode */ + ldr r1, [r0, #EMC_XM2VTTGENPADCTRL] + mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN + and r1, r1, r2 + str r1, [r0, #EMC_XM2VTTGENPADCTRL] + ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2] + orr r1, r1, #7 @ set E_NO_VTTGEN + str r1, [r0, #EMC_XM2VTTGENPADCTRL2] + + emc_timing_update r1, r0 + + ldr r1, [r4, #PMC_CTRL] + tst r1, #PMC_CTRL_SIDE_EFFECT_LP0 + bne pmc_io_dpd_skip + /* + * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK + * and COMP in the lowest power mode when LP1. + */ + mov32 r1, 0x8EC00000 + str r1, [r4, #PMC_IO_DPD_REQ] +pmc_io_dpd_skip: + + dsb + + mov pc, lr + + .ltorg +/* dummy symbol for end of IRAM */ + .align L1_CACHE_SHIFT + .global tegra30_iram_end +tegra30_iram_end: + b . #endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 8388113419fd..8d06213fbc47 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -134,10 +134,10 @@ ENTRY(tegra_shut_off_mmu) #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ check_cpu_part_num 0xc09, r9, r10 - movweq r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) - movteq r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) - moveq r5, #0 - streq r5, [r4, #L2X0_CTRL] + movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) + movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) + moveq r3, #0 + streq r3, [r2, #L2X0_CTRL] #endif mov pc, r0 ENDPROC(tegra_shut_off_mmu) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index e907e406d129..a4edbb3abd3d 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -46,6 +46,14 @@ #define TEGRA_FLUSH_CACHE_ALL 1 #ifdef __ASSEMBLY__ +/* waits until the microsecond counter (base) is > rn */ +.macro wait_until, rn, base, tmp + add \rn, \rn, #1 +1001: ldr \tmp, [\base] + cmp \tmp, \rn + bmi 1001b +.endm + /* returns the offset of the flow controller halt register for a cpu */ .macro cpu_to_halt_reg rd, rcpu cmp \rcpu, #0 -- cgit v1.2.3 From 731a9274382f8e6f4961df79fe12ebcc5431a5df Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:05 +0800 Subject: ARM: tegra: add LP1 suspend support for Tegra20 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * putting SDRAM into self-refresh * storing some EMC registers and SCLK burst policy * switching CPU to CLK_M (12MHz OSC) * switching SCLK to CLK_S (32KHz OSC) * tunning off PLLM, PLLP and PLLC * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, and PLLC * restoring some EMC registers and SCLK burst policy * setting up CCLK burst policy to PLLP * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored, CCLK burst policy be set in PLLP. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Colin Cross Gary King Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/pm-tegra20.c | 34 +++++ arch/arm/mach-tegra/pm.c | 8 + arch/arm/mach-tegra/pm.h | 2 + arch/arm/mach-tegra/sleep-tegra20.S | 296 ++++++++++++++++++++++++++++++++++++ 5 files changed, 341 insertions(+) create mode 100644 arch/arm/mach-tegra/pm-tegra20.c (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index d341980d5ca9..a3fe22d5b06a 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o endif diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c new file mode 100644 index 000000000000..d65e1d786400 --- /dev/null +++ b/arch/arm/mach-tegra/pm-tegra20.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include + +#include "pm.h" + +#ifdef CONFIG_PM_SLEEP +extern u32 tegra20_iram_start, tegra20_iram_end; +extern void tegra20_sleep_core_finish(unsigned long); + +void tegra20_lp1_iram_hook(void) +{ + tegra_lp1_iram.start_addr = &tegra20_iram_start; + tegra_lp1_iram.end_addr = &tegra20_iram_end; +} + +void tegra20_sleep_core_init(void) +{ + tegra_sleep_core_finish = tegra20_sleep_core_finish; +} +#endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 7739d5586cb7..e718350367e4 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -210,6 +210,10 @@ static int tegra_sleep_core(unsigned long v2p) static bool tegra_lp1_iram_hook(void) { switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_lp1_iram_hook(); + break; case TEGRA30: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) tegra30_lp1_iram_hook(); @@ -232,6 +236,10 @@ static bool tegra_lp1_iram_hook(void) static bool tegra_sleep_core_init(void) { switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_sleep_core_init(); + break; case TEGRA30: if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) tegra30_sleep_core_init(); diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 803bd5382257..fe204e5256e7 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -30,6 +30,8 @@ struct tegra_lp1_iram { extern struct tegra_lp1_iram tegra_lp1_iram; extern void (*tegra_sleep_core_finish)(unsigned long v2p); +void tegra20_lp1_iram_hook(void); +void tegra20_sleep_core_init(void); void tegra30_lp1_iram_hook(void); void tegra30_sleep_core_init(void); diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index f87721d6e50d..5c3bd11c9838 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -23,10 +23,49 @@ #include #include #include +#include #include "sleep.h" #include "flowctrl.h" +#define EMC_CFG 0xc +#define EMC_ADR_CFG 0x10 +#define EMC_REFRESH 0x70 +#define EMC_NOP 0xdc +#define EMC_SELF_REF 0xe0 +#define EMC_REQ_CTRL 0x2b0 +#define EMC_EMC_STATUS 0x2b4 + +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_SCLK_BURST 0x28 +#define CLK_RESET_SCLK_DIVIDER 0x2c +#define CLK_RESET_PLLC_BASE 0x80 +#define CLK_RESET_PLLM_BASE 0x90 +#define CLK_RESET_PLLP_BASE 0xa0 + +#define APB_MISC_XM2CFGCPADCTRL 0x8c8 +#define APB_MISC_XM2CFGDPADCTRL 0x8cc +#define APB_MISC_XM2CLKCFGPADCTRL 0x8d0 +#define APB_MISC_XM2COMPPADCTRL 0x8d4 +#define APB_MISC_XM2VTTGENPADCTRL 0x8d8 +#define APB_MISC_XM2CFGCPADCTRL2 0x8e4 +#define APB_MISC_XM2CFGDPADCTRL2 0x8e8 + +.macro pll_enable, rd, r_car_base, pll_base + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + orreq \rd, \rd, #(1 << 30) + streq \rd, [\r_car_base, #\pll_base] +.endm + +.macro emc_device_mask, rd, base + ldr \rd, [\base, #EMC_ADR_CFG] + tst \rd, #(0x3 << 24) + moveq \rd, #(0x1 << 8) @ just 1 device + movne \rd, #(0x3 << 8) @ 2 devices +.endm + #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra20_hotplug_shutdown(void) @@ -180,6 +219,28 @@ ENTRY(tegra20_cpu_is_resettable_soon) mov pc, lr ENDPROC(tegra20_cpu_is_resettable_soon) +/* + * tegra20_sleep_core_finish(unsigned long v2p) + * + * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to + * tegra20_tear_down_core in IRAM + */ +ENTRY(tegra20_sleep_core_finish) + /* Flush, disable the L1 data cache and exit SMP */ + bl tegra_disable_clean_inv_dcache + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + + mov32 r0, tegra20_tear_down_core + mov32 r1, tegra20_iram_start + sub r0, r0, r1 + mov32 r1, TEGRA_IRAM_CODE_AREA + add r0, r0, r1 + + mov pc, r3 +ENDPROC(tegra20_sleep_core_finish) + /* * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) * @@ -251,6 +312,150 @@ ENTRY(tegra20_tear_down_cpu) b tegra20_enter_sleep ENDPROC(tegra20_tear_down_cpu) +/* START OF ROUTINES COPIED TO IRAM */ + .align L1_CACHE_SHIFT + .globl tegra20_iram_start +tegra20_iram_start: + +/* + * tegra20_lp1_reset + * + * reset vector for LP1 restore; copied into IRAM during suspend. + * Brings the system back up to a safe staring point (SDRAM out of + * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP, + * system clock running on the same PLL that it suspended at), and + * jumps to tegra_resume to restore virtual addressing and PLLX. + * The physical address of tegra_resume expected to be stored in + * PMC_SCRATCH41. + * + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + */ +ENTRY(tegra20_lp1_reset) + /* + * The CPU and system bus are running at 32KHz and executing from + * IRAM when this code is executed; immediately switch to CLKM and + * enable PLLM, PLLP, PLLC. + */ + mov32 r0, TEGRA_CLK_RESET_BASE + + mov r1, #(1 << 28) + str r1, [r0, #CLK_RESET_SCLK_BURST] + str r1, [r0, #CLK_RESET_CCLK_BURST] + mov r1, #0 + str r1, [r0, #CLK_RESET_CCLK_DIVIDER] + str r1, [r0, #CLK_RESET_SCLK_DIVIDER] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE + pll_enable r1, r0, CLK_RESET_PLLP_BASE + pll_enable r1, r0, CLK_RESET_PLLC_BASE + + adr r2, tegra20_sdram_pad_address + adr r4, tegra20_sdram_pad_save + mov r5, #0 + + ldr r6, tegra20_sdram_pad_size +padload: + ldr r7, [r2, r5] @ r7 is the addr in the pad_address + + ldr r1, [r4, r5] + str r1, [r7] @ restore the value in pad_save + + add r5, r5, #4 + cmp r6, r5 + bne padload + +padload_done: + /* 255uS delay for PLL stabilization */ + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #0xff + wait_until r1, r7, r9 + + adr r4, tegra20_sclk_save + ldr r4, [r4] + str r4, [r0, #CLK_RESET_SCLK_BURST] + mov32 r4, ((1 << 28) | (4)) @ burst policy is PLLP + str r4, [r0, #CLK_RESET_CCLK_BURST] + + mov32 r0, TEGRA_EMC_BASE + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP + str r1, [r0, #EMC_CFG] + + mov r1, #0 + str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh + mov r1, #1 + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_REFRESH] + + emc_device_mask r1, r0 + +exit_selfrefresh_loop: + ldr r2, [r0, #EMC_EMC_STATUS] + ands r2, r2, r1 + bne exit_selfrefresh_loop + + mov r1, #0 @ unstall all transactions + str r1, [r0, #EMC_REQ_CTRL] + + mov32 r0, TEGRA_PMC_BASE + ldr r0, [r0, #PMC_SCRATCH41] + mov pc, r0 @ jump to tegra_resume +ENDPROC(tegra20_lp1_reset) + +/* + * tegra20_tear_down_core + * + * copied into and executed from IRAM + * puts memory in self-refresh for LP0 and LP1 + */ +tegra20_tear_down_core: + bl tegra20_sdram_self_refresh + bl tegra20_switch_cpu_to_clk32k + b tegra20_enter_sleep + +/* + * tegra20_switch_cpu_to_clk32k + * + * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock + * to the 32KHz clock. + */ +tegra20_switch_cpu_to_clk32k: + /* + * start by switching to CLKM to safely disable PLLs, then switch to + * CLKS. + */ + mov r0, #(1 << 28) + str r0, [r5, #CLK_RESET_SCLK_BURST] + str r0, [r5, #CLK_RESET_CCLK_BURST] + mov r0, #0 + str r0, [r5, #CLK_RESET_CCLK_DIVIDER] + str r0, [r5, #CLK_RESET_SCLK_DIVIDER] + + /* 2uS delay delay between changing SCLK and disabling PLLs */ + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + + /* disable PLLM, PLLP and PLLC */ + ldr r0, [r5, #CLK_RESET_PLLM_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLM_BASE] + ldr r0, [r5, #CLK_RESET_PLLP_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLP_BASE] + ldr r0, [r5, #CLK_RESET_PLLC_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLC_BASE] + + /* switch to CLKS */ + mov r0, #0 /* brust policy = 32KHz */ + str r0, [r5, #CLK_RESET_SCLK_BURST] + + mov pc, lr + /* * tegra20_enter_sleep * @@ -275,4 +480,95 @@ halted: isb b halted +/* + * tegra20_sdram_self_refresh + * + * called with MMU off and caches disabled + * puts sdram in self refresh + * must be executed from IRAM + */ +tegra20_sdram_self_refresh: + mov32 r1, TEGRA_EMC_BASE @ r1 reserved for emc base addr + + mov r2, #3 + str r2, [r1, #EMC_REQ_CTRL] @ stall incoming DRAM requests + +emcidle: + ldr r2, [r1, #EMC_EMC_STATUS] + tst r2, #4 + beq emcidle + + mov r2, #1 + str r2, [r1, #EMC_SELF_REF] + + emc_device_mask r2, r1 + +emcself: + ldr r3, [r1, #EMC_EMC_STATUS] + and r3, r3, r2 + cmp r3, r2 + bne emcself @ loop until DDR in self-refresh + + adr r2, tegra20_sdram_pad_address + adr r3, tegra20_sdram_pad_safe + adr r4, tegra20_sdram_pad_save + mov r5, #0 + + ldr r6, tegra20_sdram_pad_size +padsave: + ldr r0, [r2, r5] @ r0 is the addr in the pad_address + + ldr r1, [r0] + str r1, [r4, r5] @ save the content of the addr + + ldr r1, [r3, r5] + str r1, [r0] @ set the save val to the addr + + add r5, r5, #4 + cmp r6, r5 + bne padsave +padsave_done: + + mov32 r5, TEGRA_CLK_RESET_BASE + ldr r0, [r5, #CLK_RESET_SCLK_BURST] + adr r2, tegra20_sclk_save + str r0, [r2] + dsb + mov pc, lr + +tegra20_sdram_pad_address: + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2 + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2 + +tegra20_sdram_pad_size: + .word tegra20_sdram_pad_size - tegra20_sdram_pad_address + +tegra20_sdram_pad_safe: + .word 0x8 + .word 0x8 + .word 0x0 + .word 0x8 + .word 0x5500 + .word 0x08080040 + .word 0x0 + +tegra20_sclk_save: + .word 0x0 + +tegra20_sdram_pad_save: + .rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4 + .long 0 + .endr + + .ltorg +/* dummy symbol for end of IRAM */ + .align L1_CACHE_SHIFT + .globl tegra20_iram_end +tegra20_iram_end: + b . #endif -- cgit v1.2.3 From e9f624499cc84a625648ccfbd550b74d17d52fb2 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Mon, 12 Aug 2013 17:40:06 +0800 Subject: ARM: tegra: add LP1 suspend support for Tegra114 The LP1 suspend mode will power off the CPU, clock gated the PLLs and put SDRAM to self-refresh mode. Any interrupt can wake up device from LP1. The sequence when LP1 suspending: * tunning off L1 data cache and the MMU * storing some EMC registers, DPD (deep power down) status, clk source of mselect and SCLK burst policy * putting SDRAM into self-refresh * switching CPU to CLK_M (12MHz OSC) * tunning off PLLM, PLLP, PLLA, PLLC and PLLX * switching SCLK to CLK_S (32KHz OSC) * shutting off the CPU rail The sequence of LP1 resuming: * re-enabling PLLM, PLLP, PLLA, PLLC and PLLX * restoring the clk source of mselect and SCLK burst policy * setting up CCLK burst policy to PLLX * restoring DPD status and some EMC registers * resuming SDRAM to normal mode * jumping to the "tegra_resume" from PMC_SCRATCH41 Due to the SDRAM will be put into self-refresh mode, the low level procedures of LP1 suspending and resuming should be copied to TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) when suspending. Before restoring the CPU context when resuming, the SDRAM needs to be switched back to normal mode. And the PLLs need to be re-enabled, SCLK burst policy be restored. Then jumping to "tegra_resume" that was expected to be stored in PMC_SCRATCH41 to restore CPU context and back to kernel. Based on the work by: Bo Yan Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/Makefile | 1 + arch/arm/mach-tegra/iomap.h | 6 ++ arch/arm/mach-tegra/pm.c | 8 +- arch/arm/mach-tegra/sleep-tegra30.S | 141 ++++++++++++++++++++++++++++++++---- 4 files changed, 141 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index a3fe22d5b06a..f4e70631626f 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index f2bdcb4eac94..aba36291d98c 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -239,6 +239,12 @@ #define TEGRA_KFUSE_BASE 0x7000FC00 #define TEGRA_KFUSE_SIZE SZ_1K +#define TEGRA_EMC0_BASE 0x7001A000 +#define TEGRA_EMC0_SIZE SZ_2K + +#define TEGRA_EMC1_BASE 0x7001A800 +#define TEGRA_EMC1_SIZE SZ_2K + #define TEGRA_CSITE_BASE 0x70040000 #define TEGRA_CSITE_SIZE SZ_256K diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index e718350367e4..eaf6bd372ee1 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -215,7 +215,9 @@ static bool tegra_lp1_iram_hook(void) tegra20_lp1_iram_hook(); break; case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) tegra30_lp1_iram_hook(); break; default: @@ -241,7 +243,9 @@ static bool tegra_sleep_core_init(void) tegra20_sleep_core_init(); break; case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) tegra30_sleep_core_init(); break; default: diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 2be7f70e19cb..63fa91b5fafb 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -65,6 +65,10 @@ #define CLK_RESET_PLLA_MISC 0xbc #define CLK_RESET_PLLX_BASE 0xe0 #define CLK_RESET_PLLX_MISC 0xe4 +#define CLK_RESET_PLLX_MISC3 0x518 +#define CLK_RESET_PLLX_MISC3_IDDQ 3 +#define CLK_RESET_PLLM_MISC_IDDQ 5 +#define CLK_RESET_PLLC_MISC_IDDQ 26 #define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4 @@ -114,6 +118,18 @@ beq 1b .endm +.macro pll_iddq_exit, rd, car, iddq, iddq_bit + ldr \rd, [\car, #\iddq] + bic \rd, \rd, #(1<<\iddq_bit) + str \rd, [\car, #\iddq] +.endm + +.macro pll_iddq_entry, rd, car, iddq, iddq_bit + ldr \rd, [\car, #\iddq] + orr \rd, \rd, #(1<<\iddq_bit) + str \rd, [\car, #\iddq] +.endm + #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra30_hotplug_shutdown(void) @@ -315,6 +331,32 @@ ENTRY(tegra30_lp1_reset) str r1, [r0, #CLK_RESET_CCLK_DIVIDER] str r1, [r0, #CLK_RESET_SCLK_DIVIDER] + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 + beq _no_pll_iddq_exit + + pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ + pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ + pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ + + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r3 + + /* enable PLLM via PMC */ + mov32 r2, TEGRA_PMC_BASE + ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + orr r1, r1, #(1 << 12) + str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0 + pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0 + pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0 + + b _pll_m_c_x_done + +_no_pll_iddq_exit: /* enable PLLM via PMC */ mov32 r2, TEGRA_PMC_BASE ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] @@ -322,11 +364,13 @@ ENTRY(tegra30_lp1_reset) str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC - pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC - pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC +_pll_m_c_x_done: + pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC + pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC + pll_locked r1, r0, CLK_RESET_PLLM_BASE pll_locked r1, r0, CLK_RESET_PLLP_BASE pll_locked r1, r0, CLK_RESET_PLLA_BASE @@ -346,7 +390,11 @@ ENTRY(tegra30_lp1_reset) ldr r4, [r5, #0x1C] @ restore SCLK_BURST str r4, [r0, #CLK_RESET_SCLK_BURST] - mov32 r4, ((1 << 28) | (0x8)) @ burst policy is PLLX + cmp r10, #TEGRA30 + movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX + movteq r4, #:upper16:((1 << 28) | (0x8)) + movwne r4, #:lower16:((1 << 28) | (0xe)) + movtne r4, #:upper16:((1 << 28) | (0xe)) str r4, [r0, #CLK_RESET_CCLK_BURST] /* Restore pad power state to normal */ @@ -356,8 +404,13 @@ ENTRY(tegra30_lp1_reset) orr r1, r1, #(1 << 30) str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF - mov32 r0, TEGRA_EMC_BASE @ r0 reserved for emc base + cmp r10, #TEGRA30 + movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base + movteq r0, #:upper16:TEGRA_EMC_BASE + movwne r0, #:lower16:TEGRA_EMC0_BASE + movtne r0, #:upper16:TEGRA_EMC0_BASE +exit_self_refresh: ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL str r1, [r0, #EMC_XM2VTTGENPADCTRL] ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2 @@ -372,8 +425,14 @@ ENTRY(tegra30_lp1_reset) emc_timing_update r1, r0 + cmp r10, #TEGRA114 + movweq r1, #:lower16:TEGRA_EMC1_BASE + movteq r1, #:upper16:TEGRA_EMC1_BASE + cmpeq r0, r1 + ldr r1, [r0, #EMC_AUTO_CAL_CONFIG] orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE + orreq r1, r1, #(1 << 27) @ set slave mode for channel 1 str r1, [r0, #EMC_AUTO_CAL_CONFIG] emc_wait_auto_cal_onetime: @@ -388,9 +447,10 @@ emc_wait_auto_cal_onetime: mov r1, #0 str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh mov r1, #1 - str r1, [r0, #EMC_NOP] - str r1, [r0, #EMC_NOP] - str r1, [r0, #EMC_REFRESH] + cmp r10, #TEGRA30 + streq r1, [r0, #EMC_NOP] + streq r1, [r0, #EMC_NOP] + streq r1, [r0, #EMC_REFRESH] emc_device_mask r1, r0 @@ -452,6 +512,16 @@ zcal_done: ldr r1, [r5, #0x0] @ restore EMC_CFG str r1, [r0, #EMC_CFG] + /* Tegra114 had dual EMC channel, now config the other one */ + cmp r10, #TEGRA114 + bne __no_dual_emc_chanl + mov32 r1, TEGRA_EMC1_BASE + cmp r0, r1 + movne r0, r1 + addne r5, r5, #0x20 + bne exit_self_refresh +__no_dual_emc_chanl: + mov32 r0, TEGRA_PMC_BASE ldr r0, [r0, #PMC_SCRATCH41] mov pc, r0 @ jump to tegra_resume @@ -468,12 +538,30 @@ tegra30_sdram_pad_address: .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c +tegra114_sdram_pad_address: + .word TEGRA_EMC0_BASE + EMC_CFG @0x0 + .word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4 + .word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8 + .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc + .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10 + .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + .word TEGRA_EMC1_BASE + EMC_CFG @0x20 + .word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24 + .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28 + .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c + .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30 + tegra30_sdram_pad_size: - .word tegra30_sdram_pad_size - tegra30_sdram_pad_address + .word tegra114_sdram_pad_address - tegra30_sdram_pad_address + +tegra114_sdram_pad_size: + .word tegra30_sdram_pad_size - tegra114_sdram_pad_address .type tegra30_sdram_pad_save, %object tegra30_sdram_pad_save: - .rept (tegra30_sdram_pad_size - tegra30_sdram_pad_address) / 4 + .rept (tegra30_sdram_pad_size - tegra114_sdram_pad_address) / 4 .long 0 .endr @@ -497,6 +585,7 @@ tegra30_tear_down_core: * r5 = TEGRA_CLK_RESET_BASE * r6 = TEGRA_FLOW_CTRL_BASE * r7 = TEGRA_TMRUS_BASE + * r10= SoC ID */ tegra30_switch_cpu_to_clk32k: /* @@ -543,6 +632,11 @@ tegra30_switch_cpu_to_clk32k: bic r0, r0, #(1 << 30) str r0, [r5, #CLK_RESET_PLLX_BASE] + cmp r10, #TEGRA30 + beq _no_pll_in_iddq + pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ +_no_pll_in_iddq: + /* switch to CLKS */ mov r0, #0 /* brust policy = 32KHz */ str r0, [r5, #CLK_RESET_SCLK_BURST] @@ -594,14 +688,19 @@ halted: * r5 = TEGRA_CLK_RESET_BASE * r6 = TEGRA_FLOW_CTRL_BASE * r7 = TEGRA_TMRUS_BASE + * r10= SoC ID */ tegra30_sdram_self_refresh: - adr r2, tegra30_sdram_pad_address adr r8, tegra30_sdram_pad_save + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 + adreq r2, tegra30_sdram_pad_address + ldreq r3, tegra30_sdram_pad_size + adrne r2, tegra114_sdram_pad_address + ldrne r3, tegra114_sdram_pad_size mov r9, #0 - ldr r3, tegra30_sdram_pad_size padsave: ldr r0, [r2, r9] @ r0 is the addr in the pad_address @@ -615,13 +714,18 @@ padsave_done: dsb - mov32 r0, TEGRA_EMC_BASE @ r0 reserved for emc base addr + cmp r10, #TEGRA30 + ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr + ldrne r0, =TEGRA_EMC0_BASE +enter_self_refresh: + cmp r10, #TEGRA30 mov r1, #0 str r1, [r0, #EMC_ZCAL_INTERVAL] str r1, [r0, #EMC_AUTO_CAL_INTERVAL] ldr r1, [r0, #EMC_CFG] bic r1, r1, #(1 << 28) + bicne r1, r1, #(1 << 29) str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF emc_timing_update r1, r0 @@ -660,11 +764,22 @@ emcself: and r1, r1, r2 str r1, [r0, #EMC_XM2VTTGENPADCTRL] ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2] - orr r1, r1, #7 @ set E_NO_VTTGEN + cmp r10, #TEGRA30 + orreq r1, r1, #7 @ set E_NO_VTTGEN + orrne r1, r1, #0x3f str r1, [r0, #EMC_XM2VTTGENPADCTRL2] emc_timing_update r1, r0 + /* Tegra114 had dual EMC channel, now config the other one */ + cmp r10, #TEGRA114 + bne no_dual_emc_chanl + mov32 r1, TEGRA_EMC1_BASE + cmp r0, r1 + movne r0, r1 + bne enter_self_refresh +no_dual_emc_chanl: + ldr r1, [r4, #PMC_CTRL] tst r1, #PMC_CTRL_SIDE_EFFECT_LP0 bne pmc_io_dpd_skip -- cgit v1.2.3 From d1523b52bff35ea709141abac87dd701559ef290 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 9 Aug 2013 16:49:19 +0200 Subject: PCI: tegra: Move PCIe driver to drivers/pci/host Move the PCIe driver from arch/arm/mach-tegra into the drivers/pci/host directory. The motivation is to collect various host controller drivers in the same location in order to facilitate refactoring. The Tegra PCIe driver has been largely rewritten, both in order to turn it into a proper platform driver and to add MSI (based on code by Krishna Kishore ) as well as device tree support. Signed-off-by: Thierry Reding Signed-off-by: Thierry Reding Acked-by: Bjorn Helgaas [swarren, split DT changes into a separate patch in another branch] Signed-off-by: Stephen Warren --- .../bindings/pci/nvidia,tegra20-pcie.txt | 161 ++ arch/arm/mach-tegra/Kconfig | 7 +- arch/arm/mach-tegra/Makefile | 3 - arch/arm/mach-tegra/board-harmony-pcie.c | 89 -- arch/arm/mach-tegra/board.h | 8 - arch/arm/mach-tegra/iomap.h | 3 - arch/arm/mach-tegra/pcie.c | 886 ----------- arch/arm/mach-tegra/tegra.c | 24 - drivers/pci/host/Kconfig | 4 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-tegra.c | 1535 ++++++++++++++++++++ 11 files changed, 1703 insertions(+), 1018 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt delete mode 100644 arch/arm/mach-tegra/board-harmony-pcie.c delete mode 100644 arch/arm/mach-tegra/pcie.c create mode 100644 drivers/pci/host/pci-tegra.c (limited to 'arch') diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt new file mode 100644 index 000000000000..90c112f671da --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -0,0 +1,161 @@ +NVIDIA Tegra PCIe controller + +Required properties: +- compatible: "nvidia,tegra20-pcie" +- device_type: Must be "pci" +- reg: A list of physical base address and length for each set of controller + registers. Must contain an entry for each entry in the reg-names property. +- reg-names: Must include the following entries: + "pads": PADS registers + "afi": AFI registers + "cs": configuration space region +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The Tegra interrupt that is asserted for controller interrupts + "msi": The Tegra interrupt that is asserted when an MSI is received +- pex-clk-supply: Supply voltage for internal reference clock +- vdd-supply: Power supply for controller (1.05V) +- bus-range: Range of bus numbers associated with this controller +- #address-cells: Address representation for root ports (must be 3) + - cell 0 specifies the bus and device numbers of the root port: + [23:16]: bus number + [15:11]: device number + - cell 1 denotes the upper 32 address bits and should be 0 + - cell 2 contains the lower 32 address bits and is used to translate to the + CPU address space +- #size-cells: Size representation for root ports (must be 2) +- ranges: Describes the translation of addresses for root ports and standard + PCI regions. The entries must be 6 cells each, where the first three cells + correspond to the address as described for the #address-cells property + above, the fourth cell is the physical CPU address to translate to and the + fifth and six cells are as described for the #size-cells property above. + - The first two entries are expected to translate the addresses for the root + port registers, which are referenced by the assigned-addresses property of + the root port nodes (see below). + - The remaining entries setup the mapping for the standard I/O, memory and + prefetchable PCI regions. The first cell determines the type of region + that is setup: + - 0x81000000: I/O memory region + - 0x82000000: non-prefetchable memory region + - 0xc2000000: prefetchable memory region + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: List of clock inputs of the controller. Must contain an entry for + each entry in the clock-names property. +- clock-names: Must include the following entries: + "pex": The Tegra clock of that name + "afi": The Tegra clock of that name + "pcie_xclk": The Tegra clock of that name + "pll_e": The Tegra clock of that name + +Root ports are defined as subnodes of the PCIe controller node. + +Required properties: +- device_type: Must be "pci" +- assigned-addresses: Address and size of the port configuration registers +- reg: PCI bus address of the root port +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations + are: + - Root port 0 uses 4 lanes, root port 1 is unused. + - Both root ports use 2 lanes. + +Example: + +SoC DTSI: + + pcie-controller { + compatible = "nvidia,tegra20-pcie"; + device_type = "pci"; + reg = <0x80003000 0x00000800 /* PADS registers */ + 0x80003800 0x00000200 /* AFI registers */ + 0x90000000 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <0 98 0x04 /* controller interrupt */ + 0 99 0x04>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ + 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ + 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */ + 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */ + + clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>, + <&tegra_car 118>; + clock-names = "pex", "afi", "pcie_xclk", "pll_e"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + + ranges; + + nvidia,num-lanes = <2>; + }; + }; + + +Board DTS: + + pcie-controller { + status = "okay"; + + vdd-supply = <&pci_vdd_reg>; + pex-clk-supply = <&pci_clk_reg>; + + /* root port 00:01.0 */ + pci@1,0 { + status = "okay"; + + /* bridge 01:00.0 (optional) */ + pci@0,0 { + reg = <0x010000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + + /* endpoint 02:00.0 */ + pci@0,0 { + reg = <0x020000 0 0 0 0>; + }; + }; + }; + }; + +Note that devices on the PCI bus are dynamically discovered using PCI's bus +enumeration and therefore don't need corresponding device nodes in DT. However +if a device on the PCI bus provides a non-probeable bus such as I2C or SPI, +device nodes need to be added in order to allow the bus' children to be +instantiated at the proper location in the operating system's device tree (as +illustrated by the optional nodes in the example above). diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index e963db273339..def056493260 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -21,6 +21,8 @@ config ARCH_TEGRA select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY select USE_OF + select MIGHT_HAVE_PCI + select ARCH_SUPPORTS_MSI help This enables support for NVIDIA Tegra based systems. @@ -60,11 +62,6 @@ config ARCH_TEGRA_114_SOC Support for NVIDIA Tegra T114 processor family, based on the ARM CortexA15MP CPU -config TEGRA_PCI - bool "PCI Express support" - depends on ARCH_TEGRA_2x_SOC - select PCI - config TEGRA_AHB bool "Enable AHB driver for NVIDIA Tegra SoCs" default y diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f4e70631626f..e7e5f45c6558 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o @@ -38,6 +37,4 @@ ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o - obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c deleted file mode 100644 index 035b240b9e15..000000000000 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-tegra/board-harmony-pcie.c - * - * Copyright (C) 2010 CompuLab, Ltd. - * Mike Rapoport - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include - -#include - -#include "board.h" - -#ifdef CONFIG_TEGRA_PCI - -int __init harmony_pcie_init(void) -{ - struct device_node *np; - int en_vdd_1v05; - struct regulator *regulator = NULL; - int err; - - np = of_find_node_by_path("/regulators/regulator@3"); - if (!np) { - pr_err("%s: of_find_node_by_path failed\n", __func__); - return -ENODEV; - } - - en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0); - if (en_vdd_1v05 < 0) { - pr_err("%s: of_get_named_gpio failed: %d\n", __func__, - en_vdd_1v05); - return en_vdd_1v05; - } - - err = gpio_request(en_vdd_1v05, "EN_VDD_1V05"); - if (err) { - pr_err("%s: gpio_request failed: %d\n", __func__, err); - return err; - } - - gpio_direction_output(en_vdd_1v05, 1); - - regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk"); - if (IS_ERR(regulator)) { - err = PTR_ERR(regulator); - pr_err("%s: regulator_get failed: %d\n", __func__, err); - goto err_reg; - } - - err = regulator_enable(regulator); - if (err) { - pr_err("%s: regulator_enable failed: %d\n", __func__, err); - goto err_en; - } - - err = tegra_pcie_init(true, true); - if (err) { - pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err); - goto err_pcie; - } - - return 0; - -err_pcie: - regulator_disable(regulator); -err_en: - regulator_put(regulator); -err_reg: - gpio_free(en_vdd_1v05); - - return err; -} - -#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 9a6659fe2dc2..db6810dc0b3d 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -31,7 +31,6 @@ void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); -int __init tegra_pcie_init(bool init_port0, bool init_port1); void tegra_init_late(void); @@ -48,13 +47,6 @@ int __init tegra_powergate_debugfs_init(void); static inline int tegra_powergate_debugfs_init(void) { return 0; } #endif -int __init harmony_regulator_init(void); -#ifdef CONFIG_TEGRA_PCI -int __init harmony_pcie_init(void); -#else -static inline int harmony_pcie_init(void) { return 0; } -#endif - void __init tegra_paz00_wifikill_init(void); #endif diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index aba36291d98c..3f5fa0749bde 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -286,9 +286,6 @@ #define IO_APB_VIRT IOMEM(0xFE300000) #define IO_APB_SIZE SZ_1M -#define TEGRA_PCIE_BASE 0x80000000 -#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M) - #define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c deleted file mode 100644 index 46144a19a7e7..000000000000 --- a/arch/arm/mach-tegra/pcie.c +++ /dev/null @@ -1,886 +0,0 @@ -/* - * arch/arm/mach-tegra/pci.c - * - * PCIe host controller driver for TEGRA(2) SOCs - * - * Copyright (c) 2010, CompuLab, Ltd. - * Author: Mike Rapoport - * - * Based on NVIDIA PCIe driver - * Copyright (c) 2008-2009, NVIDIA Corporation. - * - * Bits taken from arch/arm/mach-dove/pcie.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "board.h" -#include "iomap.h" - -/* Hack - need to parse this from DT */ -#define INT_PCIE_INTR 130 - -/* register definitions */ -#define AFI_OFFSET 0x3800 -#define PADS_OFFSET 0x3000 -#define RP0_OFFSET 0x0000 -#define RP1_OFFSET 0x1000 - -#define AFI_AXI_BAR0_SZ 0x00 -#define AFI_AXI_BAR1_SZ 0x04 -#define AFI_AXI_BAR2_SZ 0x08 -#define AFI_AXI_BAR3_SZ 0x0c -#define AFI_AXI_BAR4_SZ 0x10 -#define AFI_AXI_BAR5_SZ 0x14 - -#define AFI_AXI_BAR0_START 0x18 -#define AFI_AXI_BAR1_START 0x1c -#define AFI_AXI_BAR2_START 0x20 -#define AFI_AXI_BAR3_START 0x24 -#define AFI_AXI_BAR4_START 0x28 -#define AFI_AXI_BAR5_START 0x2c - -#define AFI_FPCI_BAR0 0x30 -#define AFI_FPCI_BAR1 0x34 -#define AFI_FPCI_BAR2 0x38 -#define AFI_FPCI_BAR3 0x3c -#define AFI_FPCI_BAR4 0x40 -#define AFI_FPCI_BAR5 0x44 - -#define AFI_CACHE_BAR0_SZ 0x48 -#define AFI_CACHE_BAR0_ST 0x4c -#define AFI_CACHE_BAR1_SZ 0x50 -#define AFI_CACHE_BAR1_ST 0x54 - -#define AFI_MSI_BAR_SZ 0x60 -#define AFI_MSI_FPCI_BAR_ST 0x64 -#define AFI_MSI_AXI_BAR_ST 0x68 - -#define AFI_CONFIGURATION 0xac -#define AFI_CONFIGURATION_EN_FPCI (1 << 0) - -#define AFI_FPCI_ERROR_MASKS 0xb0 - -#define AFI_INTR_MASK 0xb4 -#define AFI_INTR_MASK_INT_MASK (1 << 0) -#define AFI_INTR_MASK_MSI_MASK (1 << 8) - -#define AFI_INTR_CODE 0xb8 -#define AFI_INTR_CODE_MASK 0xf -#define AFI_INTR_MASTER_ABORT 4 -#define AFI_INTR_LEGACY 6 - -#define AFI_INTR_SIGNATURE 0xbc -#define AFI_SM_INTR_ENABLE 0xc4 - -#define AFI_AFI_INTR_ENABLE 0xc8 -#define AFI_INTR_EN_INI_SLVERR (1 << 0) -#define AFI_INTR_EN_INI_DECERR (1 << 1) -#define AFI_INTR_EN_TGT_SLVERR (1 << 2) -#define AFI_INTR_EN_TGT_DECERR (1 << 3) -#define AFI_INTR_EN_TGT_WRERR (1 << 4) -#define AFI_INTR_EN_DFPCI_DECERR (1 << 5) -#define AFI_INTR_EN_AXI_DECERR (1 << 6) -#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7) - -#define AFI_PCIE_CONFIG 0x0f8 -#define AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE (1 << 1) -#define AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE (1 << 2) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20) - -#define AFI_FUSE 0x104 -#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) - -#define AFI_PEX0_CTRL 0x110 -#define AFI_PEX1_CTRL 0x118 -#define AFI_PEX_CTRL_RST (1 << 0) -#define AFI_PEX_CTRL_REFCLK_EN (1 << 3) - -#define RP_VEND_XP 0x00000F00 -#define RP_VEND_XP_DL_UP (1 << 30) - -#define RP_LINK_CONTROL_STATUS 0x00000090 -#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000 - -#define PADS_CTL_SEL 0x0000009C - -#define PADS_CTL 0x000000A0 -#define PADS_CTL_IDDQ_1L (1 << 0) -#define PADS_CTL_TX_DATA_EN_1L (1 << 6) -#define PADS_CTL_RX_DATA_EN_1L (1 << 10) - -#define PADS_PLL_CTL 0x000000B8 -#define PADS_PLL_CTL_RST_B4SM (1 << 1) -#define PADS_PLL_CTL_LOCKDET (1 << 8) -#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16) -#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16) -#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16) -#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16) -#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20) -#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20) -#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20) - -/* PMC access is required for PCIE xclk (un)clamping */ -#define PMC_SCRATCH42 0x144 -#define PMC_SCRATCH42_PCX_CLAMP (1 << 0) - -static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); - -#define pmc_writel(value, reg) \ - __raw_writel(value, reg_pmc_base + (reg)) -#define pmc_readl(reg) \ - __raw_readl(reg_pmc_base + (reg)) - -/* - * Tegra2 defines 1GB in the AXI address map for PCIe. - * - * That address space is split into different regions, with sizes and - * offsets as follows: - * - * 0x80000000 - 0x80003fff - PCI controller registers - * 0x80004000 - 0x80103fff - PCI configuration space - * 0x80104000 - 0x80203fff - PCI extended configuration space - * 0x80203fff - 0x803fffff - unused - * 0x80400000 - 0x8040ffff - downstream IO - * 0x80410000 - 0x8fffffff - unused - * 0x90000000 - 0x9fffffff - non-prefetchable memory - * 0xa0000000 - 0xbfffffff - prefetchable memory - */ -#define PCIE_REGS_SZ SZ_16K -#define PCIE_CFG_OFF PCIE_REGS_SZ -#define PCIE_CFG_SZ SZ_1M -#define PCIE_EXT_CFG_OFF (PCIE_CFG_SZ + PCIE_CFG_OFF) -#define PCIE_EXT_CFG_SZ SZ_1M -#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ) - -#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M) -#define MEM_SIZE_0 SZ_128M -#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0) -#define MEM_SIZE_1 SZ_128M -#define PREFETCH_MEM_BASE_0 (MEM_BASE_1 + MEM_SIZE_1) -#define PREFETCH_MEM_SIZE_0 SZ_128M -#define PREFETCH_MEM_BASE_1 (PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0) -#define PREFETCH_MEM_SIZE_1 SZ_128M - -#define PCIE_CONF_BUS(b) ((b) << 16) -#define PCIE_CONF_DEV(d) ((d) << 11) -#define PCIE_CONF_FUNC(f) ((f) << 8) -#define PCIE_CONF_REG(r) \ - (((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF)) - -struct tegra_pcie_port { - int index; - u8 root_bus_nr; - void __iomem *base; - - bool link_up; - - char mem_space_name[16]; - char prefetch_space_name[20]; - struct resource res[2]; -}; - -struct tegra_pcie_info { - struct tegra_pcie_port port[2]; - int num_ports; - - void __iomem *regs; - struct resource res_mmio; - - struct clk *pex_clk; - struct clk *afi_clk; - struct clk *pcie_xclk; - struct clk *pll_e; -}; - -static struct tegra_pcie_info tegra_pcie; - -static inline void afi_writel(u32 value, unsigned long offset) -{ - writel(value, offset + AFI_OFFSET + tegra_pcie.regs); -} - -static inline u32 afi_readl(unsigned long offset) -{ - return readl(offset + AFI_OFFSET + tegra_pcie.regs); -} - -static inline void pads_writel(u32 value, unsigned long offset) -{ - writel(value, offset + PADS_OFFSET + tegra_pcie.regs); -} - -static inline u32 pads_readl(unsigned long offset) -{ - return readl(offset + PADS_OFFSET + tegra_pcie.regs); -} - -static struct tegra_pcie_port *bus_to_port(int bus) -{ - int i; - - for (i = tegra_pcie.num_ports - 1; i >= 0; i--) { - int rbus = tegra_pcie.port[i].root_bus_nr; - if (rbus != -1 && rbus == bus) - break; - } - - return i >= 0 ? tegra_pcie.port + i : NULL; -} - -static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - struct tegra_pcie_port *pp = bus_to_port(bus->number); - void __iomem *addr; - - if (pp) { - if (devfn != 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - addr = pp->base + (where & ~0x3); - } else { - addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + - PCIE_CONF_DEV(PCI_SLOT(devfn)) + - PCIE_CONF_FUNC(PCI_FUNC(devfn)) + - PCIE_CONF_REG(where)); - } - - *val = readl(addr); - - if (size == 1) - *val = (*val >> (8 * (where & 3))) & 0xff; - else if (size == 2) - *val = (*val >> (8 * (where & 3))) & 0xffff; - - return PCIBIOS_SUCCESSFUL; -} - -static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - struct tegra_pcie_port *pp = bus_to_port(bus->number); - void __iomem *addr; - - u32 mask; - u32 tmp; - - if (pp) { - if (devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = pp->base + (where & ~0x3); - } else { - addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + - PCIE_CONF_DEV(PCI_SLOT(devfn)) + - PCIE_CONF_FUNC(PCI_FUNC(devfn)) + - PCIE_CONF_REG(where)); - } - - if (size == 4) { - writel(val, addr); - return PCIBIOS_SUCCESSFUL; - } - - if (size == 2) - mask = ~(0xffff << ((where & 0x3) * 8)); - else if (size == 1) - mask = ~(0xff << ((where & 0x3) * 8)); - else - return PCIBIOS_BAD_REGISTER_NUMBER; - - tmp = readl(addr) & mask; - tmp |= val << ((where & 0x3) * 8); - writel(tmp, addr); - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops tegra_pcie_ops = { - .read = tegra_pcie_read_conf, - .write = tegra_pcie_write_conf, -}; - -static void tegra_pcie_fixup_bridge(struct pci_dev *dev) -{ - u16 reg; - - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - pci_read_config_word(dev, PCI_COMMAND, ®); - reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_SERR); - pci_write_config_word(dev, PCI_COMMAND, reg); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge); - -/* Tegra PCIE root complex wrongly reports device class */ -static void tegra_pcie_fixup_class(struct pci_dev *dev) -{ - dev->class = PCI_CLASS_BRIDGE_PCI << 8; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class); - -/* Tegra PCIE requires relaxed ordering */ -static void tegra_pcie_relax_enable(struct pci_dev *dev) -{ - pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN); -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); - -static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct tegra_pcie_port *pp; - - if (nr >= tegra_pcie.num_ports) - return 0; - - pp = tegra_pcie.port + nr; - pp->root_bus_nr = sys->busnr; - - pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE); - - /* - * IORESOURCE_MEM - */ - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), - "PCIe %d MEM", pp->index); - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[0].name = pp->mem_space_name; - if (pp->index == 0) { - pp->res[0].start = MEM_BASE_0; - pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1; - } else { - pp->res[0].start = MEM_BASE_1; - pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1; - } - pp->res[0].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[0])) - panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset); - - /* - * IORESOURCE_MEM | IORESOURCE_PREFETCH - */ - snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name), - "PCIe %d PREFETCH MEM", pp->index); - pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0; - pp->res[1].name = pp->prefetch_space_name; - if (pp->index == 0) { - pp->res[1].start = PREFETCH_MEM_BASE_0; - pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1; - } else { - pp->res[1].start = PREFETCH_MEM_BASE_1; - pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1; - } - pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - if (request_resource(&iomem_resource, &pp->res[1])) - panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); - - return 1; -} - -static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return INT_PCIE_INTR; -} - -static struct pci_bus __init *tegra_pcie_scan_bus(int nr, - struct pci_sys_data *sys) -{ - struct tegra_pcie_port *pp; - - if (nr >= tegra_pcie.num_ports) - return NULL; - - pp = tegra_pcie.port + nr; - pp->root_bus_nr = sys->busnr; - - return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys, - &sys->resources); -} - -static struct hw_pci tegra_pcie_hw __initdata = { - .nr_controllers = 2, - .setup = tegra_pcie_setup, - .scan = tegra_pcie_scan_bus, - .map_irq = tegra_pcie_map_irq, -}; - - -static irqreturn_t tegra_pcie_isr(int irq, void *arg) -{ - const char *err_msg[] = { - "Unknown", - "AXI slave error", - "AXI decode error", - "Target abort", - "Master abort", - "Invalid write", - "Response decoding error", - "AXI response decoding error", - "Transcation timeout", - }; - - u32 code, signature; - - code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK; - signature = afi_readl(AFI_INTR_SIGNATURE); - afi_writel(0, AFI_INTR_CODE); - - if (code == AFI_INTR_LEGACY) - return IRQ_NONE; - - if (code >= ARRAY_SIZE(err_msg)) - code = 0; - - /* - * do not pollute kernel log with master abort reports since they - * happen a lot during enumeration - */ - if (code == AFI_INTR_MASTER_ABORT) - pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature); - else - pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature); - - return IRQ_HANDLED; -} - -static void tegra_pcie_setup_translations(void) -{ - u32 fpci_bar; - u32 size; - u32 axi_address; - - /* Bar 0: config Bar */ - fpci_bar = ((u32)0xfdff << 16); - size = PCIE_CFG_SZ; - axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF; - afi_writel(axi_address, AFI_AXI_BAR0_START); - afi_writel(size >> 12, AFI_AXI_BAR0_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR0); - - /* Bar 1: extended config Bar */ - fpci_bar = ((u32)0xfe1 << 20); - size = PCIE_EXT_CFG_SZ; - axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF; - afi_writel(axi_address, AFI_AXI_BAR1_START); - afi_writel(size >> 12, AFI_AXI_BAR1_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR1); - - /* Bar 2: downstream IO bar */ - fpci_bar = ((__u32)0xfdfc << 16); - size = SZ_128K; - axi_address = TEGRA_PCIE_IO_BASE; - afi_writel(axi_address, AFI_AXI_BAR2_START); - afi_writel(size >> 12, AFI_AXI_BAR2_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR2); - - /* Bar 3: prefetchable memory BAR */ - fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1; - size = PREFETCH_MEM_SIZE_0 + PREFETCH_MEM_SIZE_1; - axi_address = PREFETCH_MEM_BASE_0; - afi_writel(axi_address, AFI_AXI_BAR3_START); - afi_writel(size >> 12, AFI_AXI_BAR3_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR3); - - /* Bar 4: non prefetchable memory BAR */ - fpci_bar = (((MEM_BASE_0 >> 12) & 0x0FFFFFFF) << 4) | 0x1; - size = MEM_SIZE_0 + MEM_SIZE_1; - axi_address = MEM_BASE_0; - afi_writel(axi_address, AFI_AXI_BAR4_START); - afi_writel(size >> 12, AFI_AXI_BAR4_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR4); - - /* Bar 5: NULL out the remaining BAR as it is not used */ - fpci_bar = 0; - size = 0; - axi_address = 0; - afi_writel(axi_address, AFI_AXI_BAR5_START); - afi_writel(size >> 12, AFI_AXI_BAR5_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR5); - - /* map all upstream transactions as uncached */ - afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST); - afi_writel(0, AFI_CACHE_BAR0_SZ); - afi_writel(0, AFI_CACHE_BAR1_ST); - afi_writel(0, AFI_CACHE_BAR1_SZ); - - /* No MSI */ - afi_writel(0, AFI_MSI_FPCI_BAR_ST); - afi_writel(0, AFI_MSI_BAR_SZ); - afi_writel(0, AFI_MSI_AXI_BAR_ST); - afi_writel(0, AFI_MSI_BAR_SZ); -} - -static int tegra_pcie_enable_controller(void) -{ - u32 val, reg; - int i, timeout; - - /* Enable slot clock and pulse the reset signals */ - for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) { - val = afi_readl(reg) | AFI_PEX_CTRL_REFCLK_EN; - afi_writel(val, reg); - val &= ~AFI_PEX_CTRL_RST; - afi_writel(val, reg); - - val = afi_readl(reg) | AFI_PEX_CTRL_RST; - afi_writel(val, reg); - } - - /* Enable dual controller and both ports */ - val = afi_readl(AFI_PCIE_CONFIG); - val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE | - AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE | - AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK); - val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; - afi_writel(val, AFI_PCIE_CONFIG); - - val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS; - afi_writel(val, AFI_FUSE); - - /* Initialze internal PHY, enable up to 16 PCIE lanes */ - pads_writel(0x0, PADS_CTL_SEL); - - /* override IDDQ to 1 on all 4 lanes */ - val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L; - pads_writel(val, PADS_CTL); - - /* - * set up PHY PLL inputs select PLLE output as refclock, - * set TX ref sel to div10 (not div5) - */ - val = pads_readl(PADS_PLL_CTL); - val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK); - val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10); - pads_writel(val, PADS_PLL_CTL); - - /* take PLL out of reset */ - val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM; - pads_writel(val, PADS_PLL_CTL); - - /* - * Hack, set the clock voltage to the DEFAULT provided by hw folks. - * This doesn't exist in the documentation - */ - pads_writel(0xfa5cfa5c, 0xc8); - - /* Wait for the PLL to lock */ - timeout = 300; - do { - val = pads_readl(PADS_PLL_CTL); - usleep_range(1000, 1000); - if (--timeout == 0) { - pr_err("Tegra PCIe error: timeout waiting for PLL\n"); - return -EBUSY; - } - } while (!(val & PADS_PLL_CTL_LOCKDET)); - - /* turn off IDDQ override */ - val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L; - pads_writel(val, PADS_CTL); - - /* enable TX/RX data */ - val = pads_readl(PADS_CTL); - val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L); - pads_writel(val, PADS_CTL); - - /* Take the PCIe interface module out of reset */ - tegra_periph_reset_deassert(tegra_pcie.pcie_xclk); - - /* Finally enable PCIe */ - val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI; - afi_writel(val, AFI_CONFIGURATION); - - val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR | - AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR | - AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR); - afi_writel(val, AFI_AFI_INTR_ENABLE); - afi_writel(0xffffffff, AFI_SM_INTR_ENABLE); - - /* FIXME: No MSI for now, only INT */ - afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK); - - /* Disable all execptions */ - afi_writel(0, AFI_FPCI_ERROR_MASKS); - - return 0; -} - -static void tegra_pcie_xclk_clamp(bool clamp) -{ - u32 reg; - - reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP; - - if (clamp) - reg |= PMC_SCRATCH42_PCX_CLAMP; - - pmc_writel(reg, PMC_SCRATCH42); -} - -static void tegra_pcie_power_off(void) -{ - tegra_periph_reset_assert(tegra_pcie.pcie_xclk); - tegra_periph_reset_assert(tegra_pcie.afi_clk); - tegra_periph_reset_assert(tegra_pcie.pex_clk); - - tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); - tegra_pcie_xclk_clamp(true); -} - -static int tegra_pcie_power_regate(void) -{ - int err; - - tegra_pcie_power_off(); - - tegra_pcie_xclk_clamp(true); - - tegra_periph_reset_assert(tegra_pcie.pcie_xclk); - tegra_periph_reset_assert(tegra_pcie.afi_clk); - - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, - tegra_pcie.pex_clk); - if (err) { - pr_err("PCIE: powerup sequence failed: %d\n", err); - return err; - } - - tegra_periph_reset_deassert(tegra_pcie.afi_clk); - - tegra_pcie_xclk_clamp(false); - - clk_prepare_enable(tegra_pcie.afi_clk); - clk_prepare_enable(tegra_pcie.pex_clk); - return clk_prepare_enable(tegra_pcie.pll_e); -} - -static int tegra_pcie_clocks_get(void) -{ - int err; - - tegra_pcie.pex_clk = clk_get(NULL, "pex"); - if (IS_ERR(tegra_pcie.pex_clk)) - return PTR_ERR(tegra_pcie.pex_clk); - - tegra_pcie.afi_clk = clk_get(NULL, "afi"); - if (IS_ERR(tegra_pcie.afi_clk)) { - err = PTR_ERR(tegra_pcie.afi_clk); - goto err_afi_clk; - } - - tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk"); - if (IS_ERR(tegra_pcie.pcie_xclk)) { - err = PTR_ERR(tegra_pcie.pcie_xclk); - goto err_pcie_xclk; - } - - tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e"); - if (IS_ERR(tegra_pcie.pll_e)) { - err = PTR_ERR(tegra_pcie.pll_e); - goto err_pll_e; - } - - return 0; - -err_pll_e: - clk_put(tegra_pcie.pcie_xclk); -err_pcie_xclk: - clk_put(tegra_pcie.afi_clk); -err_afi_clk: - clk_put(tegra_pcie.pex_clk); - - return err; -} - -static void tegra_pcie_clocks_put(void) -{ - clk_put(tegra_pcie.pll_e); - clk_put(tegra_pcie.pcie_xclk); - clk_put(tegra_pcie.afi_clk); - clk_put(tegra_pcie.pex_clk); -} - -static int __init tegra_pcie_get_resources(void) -{ - int err; - - err = tegra_pcie_clocks_get(); - if (err) { - pr_err("PCIE: failed to get clocks: %d\n", err); - return err; - } - - err = tegra_pcie_power_regate(); - if (err) { - pr_err("PCIE: failed to power up: %d\n", err); - goto err_pwr_on; - } - - tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ); - if (tegra_pcie.regs == NULL) { - pr_err("PCIE: Failed to map PCI/AFI registers\n"); - err = -ENOMEM; - goto err_map_reg; - } - - err = request_irq(INT_PCIE_INTR, tegra_pcie_isr, - IRQF_SHARED, "PCIE", &tegra_pcie); - if (err) { - pr_err("PCIE: Failed to register IRQ: %d\n", err); - goto err_req_io; - } - set_irq_flags(INT_PCIE_INTR, IRQF_VALID); - - return 0; - -err_req_io: - iounmap(tegra_pcie.regs); -err_map_reg: - tegra_pcie_power_off(); -err_pwr_on: - tegra_pcie_clocks_put(); - - return err; -} - -/* - * FIXME: If there are no PCIe cards attached, then calling this function - * can result in the increase of the bootup time as there are big timeout - * loops. - */ -#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */ -static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx, - u32 reset_reg) -{ - u32 reg; - int retries = 3; - int timeout; - - do { - timeout = TEGRA_PCIE_LINKUP_TIMEOUT; - while (timeout) { - reg = readl(pp->base + RP_VEND_XP); - - if (reg & RP_VEND_XP_DL_UP) - break; - - mdelay(1); - timeout--; - } - - if (!timeout) { - pr_err("PCIE: port %d: link down, retrying\n", idx); - goto retry; - } - - timeout = TEGRA_PCIE_LINKUP_TIMEOUT; - while (timeout) { - reg = readl(pp->base + RP_LINK_CONTROL_STATUS); - - if (reg & 0x20000000) - return true; - - mdelay(1); - timeout--; - } - -retry: - /* Pulse the PEX reset */ - reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST; - afi_writel(reg, reset_reg); - mdelay(1); - reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST; - afi_writel(reg, reset_reg); - - retries--; - } while (retries); - - return false; -} - -static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg) -{ - struct tegra_pcie_port *pp; - - pp = tegra_pcie.port + tegra_pcie.num_ports; - - pp->index = -1; - pp->base = tegra_pcie.regs + offset; - pp->link_up = tegra_pcie_check_link(pp, index, reset_reg); - - if (!pp->link_up) { - pp->base = NULL; - printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index); - return; - } - - tegra_pcie.num_ports++; - pp->index = index; - pp->root_bus_nr = -1; - memset(pp->res, 0, sizeof(pp->res)); -} - -int __init tegra_pcie_init(bool init_port0, bool init_port1) -{ - int err; - - if (!(init_port0 || init_port1)) - return -ENODEV; - - pcibios_min_mem = 0; - - err = tegra_pcie_get_resources(); - if (err) - return err; - - err = tegra_pcie_enable_controller(); - if (err) - return err; - - /* setup the AFI address translations */ - tegra_pcie_setup_translations(); - - if (init_port0) - tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL); - - if (init_port1) - tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL); - - pci_common_init(&tegra_pcie_hw); - - return 0; -} diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 0d1e4128d460..fe56fcafdf15 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -116,28 +116,6 @@ out: tegra20_auxdata_lookup, parent); } -static void __init trimslice_init(void) -{ -#ifdef CONFIG_TEGRA_PCI - int ret; - - ret = tegra_pcie_init(true, true); - if (ret) - pr_err("tegra_pci_init() failed: %d\n", ret); -#endif -} - -static void __init harmony_init(void) -{ -#ifdef CONFIG_TEGRA_PCI - int ret; - - ret = harmony_pcie_init(); - if (ret) - pr_err("harmony_pcie_init() failed: %d\n", ret); -#endif -} - static void __init paz00_init(void) { if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) @@ -148,8 +126,6 @@ static struct { char *machine; void (*init)(void); } board_init_funcs[] = { - { "compulab,trimslice", trimslice_init }, - { "nvidia,harmony", harmony_init }, { "compal,paz00", paz00_init }, }; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 1184ff6fe864..5f33746c925b 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -14,4 +14,8 @@ config PCI_EXYNOS select PCIEPORTBUS select PCIE_DW +config PCI_TEGRA + bool "NVIDIA Tegra PCIe controller" + depends on ARCH_TEGRA + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 086d8500e849..a733fb0f7856 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o obj-$(CONFIG_PCIE_DW) += pcie-designware.o +obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c new file mode 100644 index 000000000000..a54a01138927 --- /dev/null +++ b/drivers/pci/host/pci-tegra.c @@ -0,0 +1,1535 @@ +/* + * PCIe host controller driver for TEGRA(2) SOCs + * + * Copyright (c) 2010, CompuLab, Ltd. + * Author: Mike Rapoport + * + * Based on NVIDIA PCIe driver + * Copyright (c) 2008-2009, NVIDIA Corporation. + * + * Bits taken from arch/arm/mach-dove/pcie.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define INT_PCI_MSI_NR (8 * 32) +#define TEGRA_MAX_PORTS 2 + +/* register definitions */ + +#define AFI_AXI_BAR0_SZ 0x00 +#define AFI_AXI_BAR1_SZ 0x04 +#define AFI_AXI_BAR2_SZ 0x08 +#define AFI_AXI_BAR3_SZ 0x0c +#define AFI_AXI_BAR4_SZ 0x10 +#define AFI_AXI_BAR5_SZ 0x14 + +#define AFI_AXI_BAR0_START 0x18 +#define AFI_AXI_BAR1_START 0x1c +#define AFI_AXI_BAR2_START 0x20 +#define AFI_AXI_BAR3_START 0x24 +#define AFI_AXI_BAR4_START 0x28 +#define AFI_AXI_BAR5_START 0x2c + +#define AFI_FPCI_BAR0 0x30 +#define AFI_FPCI_BAR1 0x34 +#define AFI_FPCI_BAR2 0x38 +#define AFI_FPCI_BAR3 0x3c +#define AFI_FPCI_BAR4 0x40 +#define AFI_FPCI_BAR5 0x44 + +#define AFI_CACHE_BAR0_SZ 0x48 +#define AFI_CACHE_BAR0_ST 0x4c +#define AFI_CACHE_BAR1_SZ 0x50 +#define AFI_CACHE_BAR1_ST 0x54 + +#define AFI_MSI_BAR_SZ 0x60 +#define AFI_MSI_FPCI_BAR_ST 0x64 +#define AFI_MSI_AXI_BAR_ST 0x68 + +#define AFI_MSI_VEC0 0x6c +#define AFI_MSI_VEC1 0x70 +#define AFI_MSI_VEC2 0x74 +#define AFI_MSI_VEC3 0x78 +#define AFI_MSI_VEC4 0x7c +#define AFI_MSI_VEC5 0x80 +#define AFI_MSI_VEC6 0x84 +#define AFI_MSI_VEC7 0x88 + +#define AFI_MSI_EN_VEC0 0x8c +#define AFI_MSI_EN_VEC1 0x90 +#define AFI_MSI_EN_VEC2 0x94 +#define AFI_MSI_EN_VEC3 0x98 +#define AFI_MSI_EN_VEC4 0x9c +#define AFI_MSI_EN_VEC5 0xa0 +#define AFI_MSI_EN_VEC6 0xa4 +#define AFI_MSI_EN_VEC7 0xa8 + +#define AFI_CONFIGURATION 0xac +#define AFI_CONFIGURATION_EN_FPCI (1 << 0) + +#define AFI_FPCI_ERROR_MASKS 0xb0 + +#define AFI_INTR_MASK 0xb4 +#define AFI_INTR_MASK_INT_MASK (1 << 0) +#define AFI_INTR_MASK_MSI_MASK (1 << 8) + +#define AFI_INTR_CODE 0xb8 +#define AFI_INTR_CODE_MASK 0xf +#define AFI_INTR_AXI_SLAVE_ERROR 1 +#define AFI_INTR_AXI_DECODE_ERROR 2 +#define AFI_INTR_TARGET_ABORT 3 +#define AFI_INTR_MASTER_ABORT 4 +#define AFI_INTR_INVALID_WRITE 5 +#define AFI_INTR_LEGACY 6 +#define AFI_INTR_FPCI_DECODE_ERROR 7 + +#define AFI_INTR_SIGNATURE 0xbc +#define AFI_UPPER_FPCI_ADDRESS 0xc0 +#define AFI_SM_INTR_ENABLE 0xc4 +#define AFI_SM_INTR_INTA_ASSERT (1 << 0) +#define AFI_SM_INTR_INTB_ASSERT (1 << 1) +#define AFI_SM_INTR_INTC_ASSERT (1 << 2) +#define AFI_SM_INTR_INTD_ASSERT (1 << 3) +#define AFI_SM_INTR_INTA_DEASSERT (1 << 4) +#define AFI_SM_INTR_INTB_DEASSERT (1 << 5) +#define AFI_SM_INTR_INTC_DEASSERT (1 << 6) +#define AFI_SM_INTR_INTD_DEASSERT (1 << 7) + +#define AFI_AFI_INTR_ENABLE 0xc8 +#define AFI_INTR_EN_INI_SLVERR (1 << 0) +#define AFI_INTR_EN_INI_DECERR (1 << 1) +#define AFI_INTR_EN_TGT_SLVERR (1 << 2) +#define AFI_INTR_EN_TGT_DECERR (1 << 3) +#define AFI_INTR_EN_TGT_WRERR (1 << 4) +#define AFI_INTR_EN_DFPCI_DECERR (1 << 5) +#define AFI_INTR_EN_AXI_DECERR (1 << 6) +#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7) + +#define AFI_PCIE_CONFIG 0x0f8 +#define AFI_PCIE_CONFIG_PCIE_DISABLE(x) (1 << ((x) + 1)) +#define AFI_PCIE_CONFIG_PCIE_DISABLE_ALL 0xe +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20) +#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20) + +#define AFI_FUSE 0x104 +#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) + +#define AFI_PEX0_CTRL 0x110 +#define AFI_PEX1_CTRL 0x118 +#define AFI_PEX_CTRL_RST (1 << 0) +#define AFI_PEX_CTRL_REFCLK_EN (1 << 3) + +#define RP_VEND_XP 0x00000F00 +#define RP_VEND_XP_DL_UP (1 << 30) + +#define RP_LINK_CONTROL_STATUS 0x00000090 +#define RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE 0x20000000 +#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000 + +#define PADS_CTL_SEL 0x0000009C + +#define PADS_CTL 0x000000A0 +#define PADS_CTL_IDDQ_1L (1 << 0) +#define PADS_CTL_TX_DATA_EN_1L (1 << 6) +#define PADS_CTL_RX_DATA_EN_1L (1 << 10) + +#define PADS_PLL_CTL 0x000000B8 +#define PADS_PLL_CTL_RST_B4SM (1 << 1) +#define PADS_PLL_CTL_LOCKDET (1 << 8) +#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16) +#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16) +#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16) +#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16) +#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20) +#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20) +#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20) + +struct tegra_msi { + struct msi_chip chip; + DECLARE_BITMAP(used, INT_PCI_MSI_NR); + struct irq_domain *domain; + unsigned long pages; + struct mutex lock; + int irq; +}; + +static inline struct tegra_msi *to_tegra_msi(struct msi_chip *chip) +{ + return container_of(chip, struct tegra_msi, chip); +} + +struct tegra_pcie { + struct device *dev; + + void __iomem *pads; + void __iomem *afi; + int irq; + + struct list_head busses; + struct resource *cs; + + struct resource io; + struct resource mem; + struct resource prefetch; + struct resource busn; + + struct clk *pex_clk; + struct clk *afi_clk; + struct clk *pcie_xclk; + struct clk *pll_e; + + struct tegra_msi msi; + + struct list_head ports; + unsigned int num_ports; + u32 xbar_config; + + struct regulator *pex_clk_supply; + struct regulator *vdd_supply; +}; + +struct tegra_pcie_port { + struct tegra_pcie *pcie; + struct list_head list; + struct resource regs; + void __iomem *base; + unsigned int index; + unsigned int lanes; +}; + +struct tegra_pcie_bus { + struct vm_struct *area; + struct list_head list; + unsigned int nr; +}; + +static inline struct tegra_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + +static inline void afi_writel(struct tegra_pcie *pcie, u32 value, + unsigned long offset) +{ + writel(value, pcie->afi + offset); +} + +static inline u32 afi_readl(struct tegra_pcie *pcie, unsigned long offset) +{ + return readl(pcie->afi + offset); +} + +static inline void pads_writel(struct tegra_pcie *pcie, u32 value, + unsigned long offset) +{ + writel(value, pcie->pads + offset); +} + +static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset) +{ + return readl(pcie->pads + offset); +} + +/* + * The configuration space mapping on Tegra is somewhat similar to the ECAM + * defined by PCIe. However it deviates a bit in how the 4 bits for extended + * register accesses are mapped: + * + * [27:24] extended register number + * [23:16] bus number + * [15:11] device number + * [10: 8] function number + * [ 7: 0] register number + * + * Mapping the whole extended configuration space would require 256 MiB of + * virtual address space, only a small part of which will actually be used. + * To work around this, a 1 MiB of virtual addresses are allocated per bus + * when the bus is first accessed. When the physical range is mapped, the + * the bus number bits are hidden so that the extended register number bits + * appear as bits [19:16]. Therefore the virtual mapping looks like this: + * + * [19:16] extended register number + * [15:11] device number + * [10: 8] function number + * [ 7: 0] register number + * + * This is achieved by stitching together 16 chunks of 64 KiB of physical + * address space via the MMU. + */ +static unsigned long tegra_pcie_conf_offset(unsigned int devfn, int where) +{ + return ((where & 0xf00) << 8) | (PCI_SLOT(devfn) << 11) | + (PCI_FUNC(devfn) << 8) | (where & 0xfc); +} + +static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie, + unsigned int busnr) +{ + pgprot_t prot = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_XN | + L_PTE_MT_DEV_SHARED | L_PTE_SHARED; + phys_addr_t cs = pcie->cs->start; + struct tegra_pcie_bus *bus; + unsigned int i; + int err; + + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&bus->list); + bus->nr = busnr; + + /* allocate 1 MiB of virtual addresses */ + bus->area = get_vm_area(SZ_1M, VM_IOREMAP); + if (!bus->area) { + err = -ENOMEM; + goto free; + } + + /* map each of the 16 chunks of 64 KiB each */ + for (i = 0; i < 16; i++) { + unsigned long virt = (unsigned long)bus->area->addr + + i * SZ_64K; + phys_addr_t phys = cs + i * SZ_1M + busnr * SZ_64K; + + err = ioremap_page_range(virt, virt + SZ_64K, phys, prot); + if (err < 0) { + dev_err(pcie->dev, "ioremap_page_range() failed: %d\n", + err); + goto unmap; + } + } + + return bus; + +unmap: + vunmap(bus->area->addr); +free: + kfree(bus); + return ERR_PTR(err); +} + +/* + * Look up a virtual address mapping for the specified bus number. If no such + * mapping existis, try to create one. + */ +static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie, + unsigned int busnr) +{ + struct tegra_pcie_bus *bus; + + list_for_each_entry(bus, &pcie->busses, list) + if (bus->nr == busnr) + return bus->area->addr; + + bus = tegra_pcie_bus_alloc(pcie, busnr); + if (IS_ERR(bus)) + return NULL; + + list_add_tail(&bus->list, &pcie->busses); + + return bus->area->addr; +} + +static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata); + void __iomem *addr = NULL; + + if (bus->number == 0) { + unsigned int slot = PCI_SLOT(devfn); + struct tegra_pcie_port *port; + + list_for_each_entry(port, &pcie->ports, list) { + if (port->index + 1 == slot) { + addr = port->base + (where & ~3); + break; + } + } + } else { + addr = tegra_pcie_bus_map(pcie, bus->number); + if (!addr) { + dev_err(pcie->dev, + "failed to map cfg. space for bus %u\n", + bus->number); + return NULL; + } + + addr += tegra_pcie_conf_offset(devfn, where); + } + + return addr; +} + +static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + void __iomem *addr; + + addr = tegra_pcie_conf_address(bus, devfn, where); + if (!addr) { + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + *value = readl(addr); + + if (size == 1) + *value = (*value >> (8 * (where & 3))) & 0xff; + else if (size == 2) + *value = (*value >> (8 * (where & 3))) & 0xffff; + + return PCIBIOS_SUCCESSFUL; +} + +static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + void __iomem *addr; + u32 mask, tmp; + + addr = tegra_pcie_conf_address(bus, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 4) { + writel(value, addr); + return PCIBIOS_SUCCESSFUL; + } + + if (size == 2) + mask = ~(0xffff << ((where & 0x3) * 8)); + else if (size == 1) + mask = ~(0xff << ((where & 0x3) * 8)); + else + return PCIBIOS_BAD_REGISTER_NUMBER; + + tmp = readl(addr) & mask; + tmp |= value << ((where & 0x3) * 8); + writel(tmp, addr); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops tegra_pcie_ops = { + .read = tegra_pcie_read_conf, + .write = tegra_pcie_write_conf, +}; + +static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port) +{ + unsigned long ret = 0; + + switch (port->index) { + case 0: + ret = AFI_PEX0_CTRL; + break; + + case 1: + ret = AFI_PEX1_CTRL; + break; + } + + return ret; +} + +static void tegra_pcie_port_reset(struct tegra_pcie_port *port) +{ + unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); + unsigned long value; + + /* pulse reset signal */ + value = afi_readl(port->pcie, ctrl); + value &= ~AFI_PEX_CTRL_RST; + afi_writel(port->pcie, value, ctrl); + + usleep_range(1000, 2000); + + value = afi_readl(port->pcie, ctrl); + value |= AFI_PEX_CTRL_RST; + afi_writel(port->pcie, value, ctrl); +} + +static void tegra_pcie_port_enable(struct tegra_pcie_port *port) +{ + unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); + unsigned long value; + + /* enable reference clock */ + value = afi_readl(port->pcie, ctrl); + value |= AFI_PEX_CTRL_REFCLK_EN; + afi_writel(port->pcie, value, ctrl); + + tegra_pcie_port_reset(port); +} + +static void tegra_pcie_port_disable(struct tegra_pcie_port *port) +{ + unsigned long ctrl = tegra_pcie_port_get_pex_ctrl(port); + unsigned long value; + + /* assert port reset */ + value = afi_readl(port->pcie, ctrl); + value &= ~AFI_PEX_CTRL_RST; + afi_writel(port->pcie, value, ctrl); + + /* disable reference clock */ + value = afi_readl(port->pcie, ctrl); + value &= ~AFI_PEX_CTRL_REFCLK_EN; + afi_writel(port->pcie, value, ctrl); +} + +static void tegra_pcie_port_free(struct tegra_pcie_port *port) +{ + struct tegra_pcie *pcie = port->pcie; + + devm_iounmap(pcie->dev, port->base); + devm_release_mem_region(pcie->dev, port->regs.start, + resource_size(&port->regs)); + list_del(&port->list); + devm_kfree(pcie->dev, port); +} + +static void tegra_pcie_fixup_bridge(struct pci_dev *dev) +{ + u16 reg; + + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { + pci_read_config_word(dev, PCI_COMMAND, ®); + reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + pci_write_config_word(dev, PCI_COMMAND, reg); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge); + +/* Tegra PCIE root complex wrongly reports device class */ +static void tegra_pcie_fixup_class(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class); + +/* Tegra PCIE requires relaxed ordering */ +static void tegra_pcie_relax_enable(struct pci_dev *dev) +{ + pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN); +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); + +static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct tegra_pcie *pcie = sys_to_pcie(sys); + + pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pcie->prefetch, + sys->mem_offset); + pci_add_resource(&sys->resources, &pcie->busn); + + pci_ioremap_io(nr * SZ_64K, pcie->io.start); + + return 1; +} + +static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin) +{ + struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata); + + return pcie->irq; +} + +static void tegra_pcie_add_bus(struct pci_bus *bus) +{ + if (IS_ENABLED(CONFIG_PCI_MSI)) { + struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata); + + bus->msi = &pcie->msi.chip; + } +} + +static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys) +{ + struct tegra_pcie *pcie = sys_to_pcie(sys); + struct pci_bus *bus; + + bus = pci_create_root_bus(pcie->dev, sys->busnr, &tegra_pcie_ops, sys, + &sys->resources); + if (!bus) + return NULL; + + pci_scan_child_bus(bus); + + return bus; +} + +static irqreturn_t tegra_pcie_isr(int irq, void *arg) +{ + const char *err_msg[] = { + "Unknown", + "AXI slave error", + "AXI decode error", + "Target abort", + "Master abort", + "Invalid write", + "Response decoding error", + "AXI response decoding error", + "Transaction timeout", + }; + struct tegra_pcie *pcie = arg; + u32 code, signature; + + code = afi_readl(pcie, AFI_INTR_CODE) & AFI_INTR_CODE_MASK; + signature = afi_readl(pcie, AFI_INTR_SIGNATURE); + afi_writel(pcie, 0, AFI_INTR_CODE); + + if (code == AFI_INTR_LEGACY) + return IRQ_NONE; + + if (code >= ARRAY_SIZE(err_msg)) + code = 0; + + /* + * do not pollute kernel log with master abort reports since they + * happen a lot during enumeration + */ + if (code == AFI_INTR_MASTER_ABORT) + dev_dbg(pcie->dev, "%s, signature: %08x\n", err_msg[code], + signature); + else + dev_err(pcie->dev, "%s, signature: %08x\n", err_msg[code], + signature); + + if (code == AFI_INTR_TARGET_ABORT || code == AFI_INTR_MASTER_ABORT || + code == AFI_INTR_FPCI_DECODE_ERROR) { + u32 fpci = afi_readl(pcie, AFI_UPPER_FPCI_ADDRESS) & 0xff; + u64 address = (u64)fpci << 32 | (signature & 0xfffffffc); + + if (code == AFI_INTR_MASTER_ABORT) + dev_dbg(pcie->dev, " FPCI address: %10llx\n", address); + else + dev_err(pcie->dev, " FPCI address: %10llx\n", address); + } + + return IRQ_HANDLED; +} + +/* + * FPCI map is as follows: + * - 0xfdfc000000: I/O space + * - 0xfdfe000000: type 0 configuration space + * - 0xfdff000000: type 1 configuration space + * - 0xfe00000000: type 0 extended configuration space + * - 0xfe10000000: type 1 extended configuration space + */ +static void tegra_pcie_setup_translations(struct tegra_pcie *pcie) +{ + u32 fpci_bar, size, axi_address; + + /* Bar 0: type 1 extended configuration space */ + fpci_bar = 0xfe100000; + size = resource_size(pcie->cs); + axi_address = pcie->cs->start; + afi_writel(pcie, axi_address, AFI_AXI_BAR0_START); + afi_writel(pcie, size >> 12, AFI_AXI_BAR0_SZ); + afi_writel(pcie, fpci_bar, AFI_FPCI_BAR0); + + /* Bar 1: downstream IO bar */ + fpci_bar = 0xfdfc0000; + size = resource_size(&pcie->io); + axi_address = pcie->io.start; + afi_writel(pcie, axi_address, AFI_AXI_BAR1_START); + afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ); + afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1); + + /* Bar 2: prefetchable memory BAR */ + fpci_bar = (((pcie->prefetch.start >> 12) & 0x0fffffff) << 4) | 0x1; + size = resource_size(&pcie->prefetch); + axi_address = pcie->prefetch.start; + afi_writel(pcie, axi_address, AFI_AXI_BAR2_START); + afi_writel(pcie, size >> 12, AFI_AXI_BAR2_SZ); + afi_writel(pcie, fpci_bar, AFI_FPCI_BAR2); + + /* Bar 3: non prefetchable memory BAR */ + fpci_bar = (((pcie->mem.start >> 12) & 0x0fffffff) << 4) | 0x1; + size = resource_size(&pcie->mem); + axi_address = pcie->mem.start; + afi_writel(pcie, axi_address, AFI_AXI_BAR3_START); + afi_writel(pcie, size >> 12, AFI_AXI_BAR3_SZ); + afi_writel(pcie, fpci_bar, AFI_FPCI_BAR3); + + /* NULL out the remaining BARs as they are not used */ + afi_writel(pcie, 0, AFI_AXI_BAR4_START); + afi_writel(pcie, 0, AFI_AXI_BAR4_SZ); + afi_writel(pcie, 0, AFI_FPCI_BAR4); + + afi_writel(pcie, 0, AFI_AXI_BAR5_START); + afi_writel(pcie, 0, AFI_AXI_BAR5_SZ); + afi_writel(pcie, 0, AFI_FPCI_BAR5); + + /* map all upstream transactions as uncached */ + afi_writel(pcie, PHYS_OFFSET, AFI_CACHE_BAR0_ST); + afi_writel(pcie, 0, AFI_CACHE_BAR0_SZ); + afi_writel(pcie, 0, AFI_CACHE_BAR1_ST); + afi_writel(pcie, 0, AFI_CACHE_BAR1_SZ); + + /* MSI translations are setup only when needed */ + afi_writel(pcie, 0, AFI_MSI_FPCI_BAR_ST); + afi_writel(pcie, 0, AFI_MSI_BAR_SZ); + afi_writel(pcie, 0, AFI_MSI_AXI_BAR_ST); + afi_writel(pcie, 0, AFI_MSI_BAR_SZ); +} + +static int tegra_pcie_enable_controller(struct tegra_pcie *pcie) +{ + struct tegra_pcie_port *port; + unsigned int timeout; + unsigned long value; + + /* configure mode and disable all ports */ + value = afi_readl(pcie, AFI_PCIE_CONFIG); + value &= ~AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK; + value |= AFI_PCIE_CONFIG_PCIE_DISABLE_ALL | pcie->xbar_config; + + list_for_each_entry(port, &pcie->ports, list) + value &= ~AFI_PCIE_CONFIG_PCIE_DISABLE(port->index); + + afi_writel(pcie, value, AFI_PCIE_CONFIG); + + value = afi_readl(pcie, AFI_FUSE); + value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS; + afi_writel(pcie, value, AFI_FUSE); + + /* initialze internal PHY, enable up to 16 PCIE lanes */ + pads_writel(pcie, 0x0, PADS_CTL_SEL); + + /* override IDDQ to 1 on all 4 lanes */ + value = pads_readl(pcie, PADS_CTL); + value |= PADS_CTL_IDDQ_1L; + pads_writel(pcie, value, PADS_CTL); + + /* + * Set up PHY PLL inputs select PLLE output as refclock, + * set TX ref sel to div10 (not div5). + */ + value = pads_readl(pcie, PADS_PLL_CTL); + value &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK); + value |= PADS_PLL_CTL_REFCLK_INTERNAL_CML | + PADS_PLL_CTL_TXCLKREF_DIV10; + pads_writel(pcie, value, PADS_PLL_CTL); + + /* take PLL out of reset */ + value = pads_readl(pcie, PADS_PLL_CTL); + value |= PADS_PLL_CTL_RST_B4SM; + pads_writel(pcie, value, PADS_PLL_CTL); + + /* + * Hack, set the clock voltage to the DEFAULT provided by hw folks. + * This doesn't exist in the documentation. + */ + pads_writel(pcie, 0xfa5cfa5c, 0xc8); + + /* wait for the PLL to lock */ + timeout = 300; + do { + value = pads_readl(pcie, PADS_PLL_CTL); + usleep_range(1000, 2000); + if (--timeout == 0) { + pr_err("Tegra PCIe error: timeout waiting for PLL\n"); + return -EBUSY; + } + } while (!(value & PADS_PLL_CTL_LOCKDET)); + + /* turn off IDDQ override */ + value = pads_readl(pcie, PADS_CTL); + value &= ~PADS_CTL_IDDQ_1L; + pads_writel(pcie, value, PADS_CTL); + + /* enable TX/RX data */ + value = pads_readl(pcie, PADS_CTL); + value |= PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L; + pads_writel(pcie, value, PADS_CTL); + + /* take the PCIe interface module out of reset */ + tegra_periph_reset_deassert(pcie->pcie_xclk); + + /* finally enable PCIe */ + value = afi_readl(pcie, AFI_CONFIGURATION); + value |= AFI_CONFIGURATION_EN_FPCI; + afi_writel(pcie, value, AFI_CONFIGURATION); + + value = AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR | + AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR | + AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR; + afi_writel(pcie, value, AFI_AFI_INTR_ENABLE); + afi_writel(pcie, 0xffffffff, AFI_SM_INTR_ENABLE); + + /* don't enable MSI for now, only when needed */ + afi_writel(pcie, AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK); + + /* disable all exceptions */ + afi_writel(pcie, 0, AFI_FPCI_ERROR_MASKS); + + return 0; +} + +static void tegra_pcie_power_off(struct tegra_pcie *pcie) +{ + int err; + + /* TODO: disable and unprepare clocks? */ + + tegra_periph_reset_assert(pcie->pcie_xclk); + tegra_periph_reset_assert(pcie->afi_clk); + tegra_periph_reset_assert(pcie->pex_clk); + + tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); + + err = regulator_disable(pcie->pex_clk_supply); + if (err < 0) + dev_err(pcie->dev, "failed to disable pex-clk regulator: %d\n", + err); + + err = regulator_disable(pcie->vdd_supply); + if (err < 0) + dev_err(pcie->dev, "failed to disable VDD regulator: %d\n", + err); +} + +static int tegra_pcie_power_on(struct tegra_pcie *pcie) +{ + int err; + + tegra_periph_reset_assert(pcie->pcie_xclk); + tegra_periph_reset_assert(pcie->afi_clk); + tegra_periph_reset_assert(pcie->pex_clk); + + tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); + + /* enable regulators */ + err = regulator_enable(pcie->vdd_supply); + if (err < 0) { + dev_err(pcie->dev, "failed to enable VDD regulator: %d\n", err); + return err; + } + + err = regulator_enable(pcie->pex_clk_supply); + if (err < 0) { + dev_err(pcie->dev, "failed to enable pex-clk regulator: %d\n", + err); + return err; + } + + err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, + pcie->pex_clk); + if (err) { + dev_err(pcie->dev, "powerup sequence failed: %d\n", err); + return err; + } + + tegra_periph_reset_deassert(pcie->afi_clk); + + err = clk_prepare_enable(pcie->afi_clk); + if (err < 0) { + dev_err(pcie->dev, "failed to enable AFI clock: %d\n", err); + return err; + } + + err = clk_prepare_enable(pcie->pll_e); + if (err < 0) { + dev_err(pcie->dev, "failed to enable PLLE clock: %d\n", err); + return err; + } + + return 0; +} + +static int tegra_pcie_clocks_get(struct tegra_pcie *pcie) +{ + pcie->pex_clk = devm_clk_get(pcie->dev, "pex"); + if (IS_ERR(pcie->pex_clk)) + return PTR_ERR(pcie->pex_clk); + + pcie->afi_clk = devm_clk_get(pcie->dev, "afi"); + if (IS_ERR(pcie->afi_clk)) + return PTR_ERR(pcie->afi_clk); + + pcie->pcie_xclk = devm_clk_get(pcie->dev, "pcie_xclk"); + if (IS_ERR(pcie->pcie_xclk)) + return PTR_ERR(pcie->pcie_xclk); + + pcie->pll_e = devm_clk_get(pcie->dev, "pll_e"); + if (IS_ERR(pcie->pll_e)) + return PTR_ERR(pcie->pll_e); + + return 0; +} + +static int tegra_pcie_get_resources(struct tegra_pcie *pcie) +{ + struct platform_device *pdev = to_platform_device(pcie->dev); + struct resource *pads, *afi, *res; + int err; + + err = tegra_pcie_clocks_get(pcie); + if (err) { + dev_err(&pdev->dev, "failed to get clocks: %d\n", err); + return err; + } + + err = tegra_pcie_power_on(pcie); + if (err) { + dev_err(&pdev->dev, "failed to power up: %d\n", err); + return err; + } + + /* request and remap controller registers */ + pads = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pads"); + if (!pads) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + afi = platform_get_resource_byname(pdev, IORESOURCE_MEM, "afi"); + if (!afi) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + pcie->pads = devm_request_and_ioremap(&pdev->dev, pads); + if (!pcie->pads) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + pcie->afi = devm_request_and_ioremap(&pdev->dev, afi); + if (!pcie->afi) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + /* request and remap configuration space */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs"); + if (!res) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + pcie->cs = devm_request_mem_region(pcie->dev, res->start, + resource_size(res), res->name); + if (!pcie->cs) { + err = -EADDRNOTAVAIL; + goto poweroff; + } + + /* request interrupt */ + err = platform_get_irq_byname(pdev, "intr"); + if (err < 0) { + dev_err(&pdev->dev, "failed to get IRQ: %d\n", err); + goto poweroff; + } + + pcie->irq = err; + + err = request_irq(pcie->irq, tegra_pcie_isr, IRQF_SHARED, "PCIE", pcie); + if (err) { + dev_err(&pdev->dev, "failed to register IRQ: %d\n", err); + goto poweroff; + } + + return 0; + +poweroff: + tegra_pcie_power_off(pcie); + return err; +} + +static int tegra_pcie_put_resources(struct tegra_pcie *pcie) +{ + if (pcie->irq > 0) + free_irq(pcie->irq, pcie); + + tegra_pcie_power_off(pcie); + return 0; +} + +static int tegra_msi_alloc(struct tegra_msi *chip) +{ + int msi; + + mutex_lock(&chip->lock); + + msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR); + if (msi < INT_PCI_MSI_NR) + set_bit(msi, chip->used); + else + msi = -ENOSPC; + + mutex_unlock(&chip->lock); + + return msi; +} + +static void tegra_msi_free(struct tegra_msi *chip, unsigned long irq) +{ + struct device *dev = chip->chip.dev; + + mutex_lock(&chip->lock); + + if (!test_bit(irq, chip->used)) + dev_err(dev, "trying to free unused MSI#%lu\n", irq); + else + clear_bit(irq, chip->used); + + mutex_unlock(&chip->lock); +} + +static irqreturn_t tegra_pcie_msi_irq(int irq, void *data) +{ + struct tegra_pcie *pcie = data; + struct tegra_msi *msi = &pcie->msi; + unsigned int i, processed = 0; + + for (i = 0; i < 8; i++) { + unsigned long reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4); + + while (reg) { + unsigned int offset = find_first_bit(®, 32); + unsigned int index = i * 32 + offset; + unsigned int irq; + + /* clear the interrupt */ + afi_writel(pcie, 1 << offset, AFI_MSI_VEC0 + i * 4); + + irq = irq_find_mapping(msi->domain, index); + if (irq) { + if (test_bit(index, msi->used)) + generic_handle_irq(irq); + else + dev_info(pcie->dev, "unhandled MSI\n"); + } else { + /* + * that's weird who triggered this? + * just clear it + */ + dev_info(pcie->dev, "unexpected MSI\n"); + } + + /* see if there's any more pending in this vector */ + reg = afi_readl(pcie, AFI_MSI_VEC0 + i * 4); + + processed++; + } + } + + return processed > 0 ? IRQ_HANDLED : IRQ_NONE; +} + +static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct tegra_msi *msi = to_tegra_msi(chip); + struct msi_msg msg; + unsigned int irq; + int hwirq; + + hwirq = tegra_msi_alloc(msi); + if (hwirq < 0) + return hwirq; + + irq = irq_create_mapping(msi->domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg.address_lo = virt_to_phys((void *)msi->pages); + /* 32 bit address only */ + msg.address_hi = 0; + msg.data = hwirq; + + write_msi_msg(irq, &msg); + + return 0; +} + +static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq) +{ + struct tegra_msi *msi = to_tegra_msi(chip); + struct irq_data *d = irq_get_irq_data(irq); + + tegra_msi_free(msi, d->hwirq); +} + +static struct irq_chip tegra_msi_irq_chip = { + .name = "Tegra PCIe MSI", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + +static int tegra_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &tegra_msi_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + +static const struct irq_domain_ops msi_domain_ops = { + .map = tegra_msi_map, +}; + +static int tegra_pcie_enable_msi(struct tegra_pcie *pcie) +{ + struct platform_device *pdev = to_platform_device(pcie->dev); + struct tegra_msi *msi = &pcie->msi; + unsigned long base; + int err; + u32 reg; + + mutex_init(&msi->lock); + + msi->chip.dev = pcie->dev; + msi->chip.setup_irq = tegra_msi_setup_irq; + msi->chip.teardown_irq = tegra_msi_teardown_irq; + + msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR, + &msi_domain_ops, &msi->chip); + if (!msi->domain) { + dev_err(&pdev->dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + err = platform_get_irq_byname(pdev, "msi"); + if (err < 0) { + dev_err(&pdev->dev, "failed to get IRQ: %d\n", err); + goto err; + } + + msi->irq = err; + + err = request_irq(msi->irq, tegra_pcie_msi_irq, 0, + tegra_msi_irq_chip.name, pcie); + if (err < 0) { + dev_err(&pdev->dev, "failed to request IRQ: %d\n", err); + goto err; + } + + /* setup AFI/FPCI range */ + msi->pages = __get_free_pages(GFP_KERNEL, 0); + base = virt_to_phys((void *)msi->pages); + + afi_writel(pcie, base, AFI_MSI_FPCI_BAR_ST); + afi_writel(pcie, base, AFI_MSI_AXI_BAR_ST); + /* this register is in 4K increments */ + afi_writel(pcie, 1, AFI_MSI_BAR_SZ); + + /* enable all MSI vectors */ + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC0); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC1); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC2); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC3); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC4); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC5); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC6); + afi_writel(pcie, 0xffffffff, AFI_MSI_EN_VEC7); + + /* and unmask the MSI interrupt */ + reg = afi_readl(pcie, AFI_INTR_MASK); + reg |= AFI_INTR_MASK_MSI_MASK; + afi_writel(pcie, reg, AFI_INTR_MASK); + + return 0; + +err: + irq_domain_remove(msi->domain); + return err; +} + +static int tegra_pcie_disable_msi(struct tegra_pcie *pcie) +{ + struct tegra_msi *msi = &pcie->msi; + unsigned int i, irq; + u32 value; + + /* mask the MSI interrupt */ + value = afi_readl(pcie, AFI_INTR_MASK); + value &= ~AFI_INTR_MASK_MSI_MASK; + afi_writel(pcie, value, AFI_INTR_MASK); + + /* disable all MSI vectors */ + afi_writel(pcie, 0, AFI_MSI_EN_VEC0); + afi_writel(pcie, 0, AFI_MSI_EN_VEC1); + afi_writel(pcie, 0, AFI_MSI_EN_VEC2); + afi_writel(pcie, 0, AFI_MSI_EN_VEC3); + afi_writel(pcie, 0, AFI_MSI_EN_VEC4); + afi_writel(pcie, 0, AFI_MSI_EN_VEC5); + afi_writel(pcie, 0, AFI_MSI_EN_VEC6); + afi_writel(pcie, 0, AFI_MSI_EN_VEC7); + + free_pages(msi->pages, 0); + + if (msi->irq > 0) + free_irq(msi->irq, pcie); + + for (i = 0; i < INT_PCI_MSI_NR; i++) { + irq = irq_find_mapping(msi->domain, i); + if (irq > 0) + irq_dispose_mapping(irq); + } + + irq_domain_remove(msi->domain); + + return 0; +} + +static int tegra_pcie_get_xbar_config(struct tegra_pcie *pcie, u32 lanes, + u32 *xbar) +{ + struct device_node *np = pcie->dev->of_node; + + switch (lanes) { + case 0x00000004: + dev_info(pcie->dev, "single-mode configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE; + return 0; + + case 0x00000202: + dev_info(pcie->dev, "dual-mode configuration\n"); + *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; + return 0; + } + + return -EINVAL; +} + +static int tegra_pcie_parse_dt(struct tegra_pcie *pcie) +{ + struct device_node *np = pcie->dev->of_node, *port; + struct of_pci_range_parser parser; + struct of_pci_range range; + struct resource res; + u32 lanes = 0; + int err; + + if (of_pci_range_parser_init(&parser, np)) { + dev_err(pcie->dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + pcie->vdd_supply = devm_regulator_get(pcie->dev, "vdd"); + if (IS_ERR(pcie->vdd_supply)) + return PTR_ERR(pcie->vdd_supply); + + pcie->pex_clk_supply = devm_regulator_get(pcie->dev, "pex-clk"); + if (IS_ERR(pcie->pex_clk_supply)) + return PTR_ERR(pcie->pex_clk_supply); + + for_each_of_pci_range(&parser, &range) { + of_pci_range_to_resource(&range, np, &res); + + switch (res.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: + memcpy(&pcie->io, &res, sizeof(res)); + pcie->io.name = "I/O"; + break; + + case IORESOURCE_MEM: + if (res.flags & IORESOURCE_PREFETCH) { + memcpy(&pcie->prefetch, &res, sizeof(res)); + pcie->prefetch.name = "PREFETCH"; + } else { + memcpy(&pcie->mem, &res, sizeof(res)); + pcie->mem.name = "MEM"; + } + break; + } + } + + err = of_pci_parse_bus_range(np, &pcie->busn); + if (err < 0) { + dev_err(pcie->dev, "failed to parse ranges property: %d\n", + err); + pcie->busn.name = np->name; + pcie->busn.start = 0; + pcie->busn.end = 0xff; + pcie->busn.flags = IORESOURCE_BUS; + } + + /* parse root ports */ + for_each_child_of_node(np, port) { + struct tegra_pcie_port *rp; + unsigned int index; + u32 value; + + err = of_pci_get_devfn(port); + if (err < 0) { + dev_err(pcie->dev, "failed to parse address: %d\n", + err); + return err; + } + + index = PCI_SLOT(err); + + if (index < 1 || index > TEGRA_MAX_PORTS) { + dev_err(pcie->dev, "invalid port number: %d\n", index); + return -EINVAL; + } + + index--; + + err = of_property_read_u32(port, "nvidia,num-lanes", &value); + if (err < 0) { + dev_err(pcie->dev, "failed to parse # of lanes: %d\n", + err); + return err; + } + + if (value > 16) { + dev_err(pcie->dev, "invalid # of lanes: %u\n", value); + return -EINVAL; + } + + lanes |= value << (index << 3); + + if (!of_device_is_available(port)) + continue; + + rp = devm_kzalloc(pcie->dev, sizeof(*rp), GFP_KERNEL); + if (!rp) + return -ENOMEM; + + err = of_address_to_resource(port, 0, &rp->regs); + if (err < 0) { + dev_err(pcie->dev, "failed to parse address: %d\n", + err); + return err; + } + + INIT_LIST_HEAD(&rp->list); + rp->index = index; + rp->lanes = value; + rp->pcie = pcie; + + rp->base = devm_request_and_ioremap(pcie->dev, &rp->regs); + if (!rp->base) + return -EADDRNOTAVAIL; + + list_add_tail(&rp->list, &pcie->ports); + } + + err = tegra_pcie_get_xbar_config(pcie, lanes, &pcie->xbar_config); + if (err < 0) { + dev_err(pcie->dev, "invalid lane configuration\n"); + return err; + } + + return 0; +} + +/* + * FIXME: If there are no PCIe cards attached, then calling this function + * can result in the increase of the bootup time as there are big timeout + * loops. + */ +#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */ +static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port) +{ + unsigned int retries = 3; + unsigned long value; + + do { + unsigned int timeout = TEGRA_PCIE_LINKUP_TIMEOUT; + + do { + value = readl(port->base + RP_VEND_XP); + + if (value & RP_VEND_XP_DL_UP) + break; + + usleep_range(1000, 2000); + } while (--timeout); + + if (!timeout) { + dev_err(port->pcie->dev, "link %u down, retrying\n", + port->index); + goto retry; + } + + timeout = TEGRA_PCIE_LINKUP_TIMEOUT; + + do { + value = readl(port->base + RP_LINK_CONTROL_STATUS); + + if (value & RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE) + return true; + + usleep_range(1000, 2000); + } while (--timeout); + +retry: + tegra_pcie_port_reset(port); + } while (--retries); + + return false; +} + +static int tegra_pcie_enable(struct tegra_pcie *pcie) +{ + struct tegra_pcie_port *port, *tmp; + struct hw_pci hw; + + list_for_each_entry_safe(port, tmp, &pcie->ports, list) { + dev_info(pcie->dev, "probing port %u, using %u lanes\n", + port->index, port->lanes); + + tegra_pcie_port_enable(port); + + if (tegra_pcie_port_check_link(port)) + continue; + + dev_info(pcie->dev, "link %u down, ignoring\n", port->index); + + tegra_pcie_port_disable(port); + tegra_pcie_port_free(port); + } + + memset(&hw, 0, sizeof(hw)); + + hw.nr_controllers = 1; + hw.private_data = (void **)&pcie; + hw.setup = tegra_pcie_setup; + hw.map_irq = tegra_pcie_map_irq; + hw.add_bus = tegra_pcie_add_bus; + hw.scan = tegra_pcie_scan_bus; + hw.ops = &tegra_pcie_ops; + + pci_common_init_dev(pcie->dev, &hw); + + return 0; +} + +static int tegra_pcie_probe(struct platform_device *pdev) +{ + struct tegra_pcie *pcie; + int err; + + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + INIT_LIST_HEAD(&pcie->busses); + INIT_LIST_HEAD(&pcie->ports); + pcie->dev = &pdev->dev; + + err = tegra_pcie_parse_dt(pcie); + if (err < 0) + return err; + + pcibios_min_mem = 0; + + err = tegra_pcie_get_resources(pcie); + if (err < 0) { + dev_err(&pdev->dev, "failed to request resources: %d\n", err); + return err; + } + + err = tegra_pcie_enable_controller(pcie); + if (err) + goto put_resources; + + /* setup the AFI address translations */ + tegra_pcie_setup_translations(pcie); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + err = tegra_pcie_enable_msi(pcie); + if (err < 0) { + dev_err(&pdev->dev, + "failed to enable MSI support: %d\n", + err); + goto put_resources; + } + } + + err = tegra_pcie_enable(pcie); + if (err < 0) { + dev_err(&pdev->dev, "failed to enable PCIe ports: %d\n", err); + goto disable_msi; + } + + platform_set_drvdata(pdev, pcie); + return 0; + +disable_msi: + if (IS_ENABLED(CONFIG_PCI_MSI)) + tegra_pcie_disable_msi(pcie); +put_resources: + tegra_pcie_put_resources(pcie); + return err; +} + +static const struct of_device_id tegra_pcie_of_match[] = { + { .compatible = "nvidia,tegra20-pcie", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_pcie_of_match); + +static struct platform_driver tegra_pcie_driver = { + .driver = { + .name = "tegra-pcie", + .owner = THIS_MODULE, + .of_match_table = tegra_pcie_of_match, + .suppress_bind_attrs = true, + }, + .probe = tegra_pcie_probe, +}; +module_platform_driver(tegra_pcie_driver); + +MODULE_AUTHOR("Thierry Reding "); +MODULE_DESCRIPTION("NVIDIA Tegra PCIe driver"); +MODULE_LICENSE("GPLv2"); -- cgit v1.2.3 From b4f173752a56187bd55752b0474429202f2ab1d3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 6 May 2013 14:19:19 -0600 Subject: ARM: tegra: disable LP2 cpuidle state if PCIe is enabled Tegra20 HW appears to have a bug such that PCIe device interrupts, whether they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around this, simply disable LP2 if any PCIe devices with interrupts are present. Detect this via the IRQ domain map operation. This is slightly over-conservative; if a device with an interrupt is present but the driver does not actually use them, LP2 will still be disabled. However, this is a reasonable trade-off which enables a simpler workaround. Signed-off-by: Stephen Warren Tested-by: Thierry Reding Acked-by: Thierry Reding --- arch/arm/mach-tegra/cpuidle-tegra20.c | 12 ++++++++++++ arch/arm/mach-tegra/cpuidle.c | 10 ++++++++++ arch/arm/mach-tegra/cpuidle.h | 1 + drivers/pci/host/pci-tegra.c | 5 +++++ include/linux/tegra-cpuidle.h | 19 +++++++++++++++++++ 5 files changed, 47 insertions(+) create mode 100644 include/linux/tegra-cpuidle.h (limited to 'arch') diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 706aa4215c36..b82dcaee2ef4 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -211,6 +211,18 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, } #endif +/* + * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether + * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around + * this, simply disable LP2 if the PCI driver and DT node are both enabled. + */ +void tegra20_cpuidle_pcie_irqs_in_use(void) +{ + pr_info_once( + "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); + tegra_idle_driver.states[1].disabled = true; +} + int __init tegra20_cpuidle_init(void) { return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index e85973cef037..0961dfcf83a4 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -44,3 +44,13 @@ void __init tegra_cpuidle_init(void) break; } } + +void tegra_cpuidle_pcie_irqs_in_use(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_cpuidle_pcie_irqs_in_use(); + break; + } +} diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index 9ec2c1ab0fa4..c017dab60ffa 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -19,6 +19,7 @@ #ifdef CONFIG_CPU_IDLE int tegra20_cpuidle_init(void); +void tegra20_cpuidle_pcie_irqs_in_use(void); int tegra30_cpuidle_init(void); int tegra114_cpuidle_init(void); void tegra_cpuidle_init(void); diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index ad95c406a6d0..7356741de36b 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -636,6 +637,8 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin) { struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata); + tegra_cpuidle_pcie_irqs_in_use(); + return pcie->irq; } @@ -1221,6 +1224,8 @@ static int tegra_msi_map(struct irq_domain *domain, unsigned int irq, irq_set_chip_data(irq, domain->host_data); set_irq_flags(irq, IRQF_VALID); + tegra_cpuidle_pcie_irqs_in_use(); + return 0; } diff --git a/include/linux/tegra-cpuidle.h b/include/linux/tegra-cpuidle.h new file mode 100644 index 000000000000..dda3647242a4 --- /dev/null +++ b/include/linux/tegra-cpuidle.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_TEGRA_CPUIDLE_H__ +#define __LINUX_TEGRA_CPUIDLE_H__ + +void tegra_cpuidle_pcie_irqs_in_use(void); + +#endif -- cgit v1.2.3