From d75a40e90e9eb08c2159e719a90a7922dab231d3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 19 Aug 2008 22:55:14 +0900 Subject: MIPS: TXx9: Make spi_eeprom.c more generic Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c --- arch/mips/txx9/generic/Makefile | 1 + arch/mips/txx9/generic/spi_eeprom.c | 103 +++++++++++++++++++++++++++++++++++ arch/mips/txx9/rbtx4938/Makefile | 2 +- arch/mips/txx9/rbtx4938/setup.c | 11 ++-- arch/mips/txx9/rbtx4938/spi_eeprom.c | 99 --------------------------------- 5 files changed, 111 insertions(+), 105 deletions(-) create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c (limited to 'arch') diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9bb34af26b73..986852cc774c 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -8,5 +8,6 @@ obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o +obj-$(CONFIG_SPI) += spi_eeprom.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/spi_eeprom.c b/arch/mips/txx9/generic/spi_eeprom.c new file mode 100644 index 000000000000..75c347238f47 --- /dev/null +++ b/arch/mips/txx9/generic/spi_eeprom.c @@ -0,0 +1,103 @@ +/* + * spi_eeprom.c + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +#define AT250X0_PAGE_SIZE 8 + +/* register board information for at25 driver */ +int __init spi_eeprom_register(int busid, int chipid, int size) +{ + struct spi_board_info info = { + .modalias = "at25", + .max_speed_hz = 1500000, /* 1.5Mbps */ + .bus_num = busid, + .chip_select = chipid, + /* Mode 0: High-Active, Sample-Then-Shift */ + }; + struct spi_eeprom *eeprom; + eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL); + if (!eeprom) + return -ENOMEM; + strcpy(eeprom->name, "at250x0"); + eeprom->byte_len = size; + eeprom->page_size = AT250X0_PAGE_SIZE; + eeprom->flags = EE_ADDR1; + info.platform_data = eeprom; + return spi_register_board_info(&info, 1); +} + +/* simple temporary spi driver to provide early access to seeprom. */ + +static struct read_param { + int busid; + int chipid; + int address; + unsigned char *buf; + int len; +} *read_param; + +static int __init early_seeprom_probe(struct spi_device *spi) +{ + int stat = 0; + u8 cmd[2]; + int len = read_param->len; + char *buf = read_param->buf; + int address = read_param->address; + + dev_info(&spi->dev, "spiclk %u KHz.\n", + (spi->max_speed_hz + 500) / 1000); + if (read_param->busid != spi->master->bus_num || + read_param->chipid != spi->chip_select) + return -ENODEV; + while (len > 0) { + /* spi_write_then_read can only work with small chunk */ + int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; + cmd[0] = 0x03; /* AT25_READ */ + cmd[1] = address; + stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); + buf += c; + len -= c; + address += c; + } + return stat; +} + +static struct spi_driver early_seeprom_driver __initdata = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = early_seeprom_probe, +}; + +int __init spi_eeprom_read(int busid, int chipid, int address, + unsigned char *buf, int len) +{ + int ret; + struct read_param param = { + .busid = busid, + .chipid = chipid, + .address = address, + .buf = buf, + .len = len + }; + + read_param = ¶m; + ret = spi_register_driver(&early_seeprom_driver); + if (!ret) + spi_unregister_driver(&early_seeprom_driver); + return ret; +} diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile index 9dcc52ae5b9d..f3e1f597b4f1 100644 --- a/arch/mips/txx9/rbtx4938/Makefile +++ b/arch/mips/txx9/rbtx4938/Makefile @@ -1,3 +1,3 @@ -obj-y += prom.o setup.o irq.o spi_eeprom.o +obj-y += prom.o setup.o irq.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 7aba92a12399..ec6e81258f73 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -111,6 +111,7 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM2_CS 0 /* IOC */ #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ +#define SPI_BUSNO 0 static int __init rbtx4938_ethaddr_init(void) { @@ -120,7 +121,7 @@ static int __init rbtx4938_ethaddr_init(void) int i; /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) { printk(KERN_ERR "seeprom: read error.\n"); return -ENODEV; } else { @@ -287,9 +288,9 @@ static int __init rbtx4938_spi_init(void) .mode = SPI_MODE_1 | SPI_CS_HIGH, }; spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); + spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128); + spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128); gpio_request(16 + SRTC_CS, "rtc-rs5c348"); gpio_direction_output(16 + SRTC_CS, 0); gpio_request(SEEPROM1_CS, "seeprom1"); @@ -298,7 +299,7 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - tx4938_spi_init(0); + tx4938_spi_init(SPI_BUSNO); return 0; } diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c deleted file mode 100644 index a7ea8b041c1d..000000000000 --- a/arch/mips/txx9/rbtx4938/spi_eeprom.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * spi_eeprom.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#define AT250X0_PAGE_SIZE 8 - -/* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) -{ - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; - struct spi_board_info info = { - .modalias = "at25", - .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, - .chip_select = chipid, - .platform_data = &eeprom, - /* Mode 0: High-Active, Sample-Then-Shift */ - }; - - return spi_register_board_info(&info, 1); -} - -/* simple temporary spi driver to provide early access to seeprom. */ - -static struct read_param { - int chipid; - int address; - unsigned char *buf; - int len; -} *read_param; - -static int __init early_seeprom_probe(struct spi_device *spi) -{ - int stat = 0; - u8 cmd[2]; - int len = read_param->len; - char *buf = read_param->buf; - int address = read_param->address; - - dev_info(&spi->dev, "spiclk %u KHz.\n", - (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) - return -ENODEV; - while (len > 0) { - /* spi_write_then_read can only work with small chunk */ - int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; - cmd[0] = 0x03; /* AT25_READ */ - cmd[1] = address; - stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); - buf += c; - len -= c; - address += c; - } - return stat; -} - -static struct spi_driver early_seeprom_driver __initdata = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = early_seeprom_probe, -}; - -int __init spi_eeprom_read(int chipid, int address, - unsigned char *buf, int len) -{ - int ret; - struct read_param param = { - .chipid = chipid, - .address = address, - .buf = buf, - .len = len - }; - - read_param = ¶m; - ret = spi_register_driver(&early_seeprom_driver); - if (!ret) - spi_unregister_driver(&early_seeprom_driver); - return ret; -} -- cgit v1.2.3