From 8349304d12cf1313bdbd6eb2083701d86809be24 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 31 Oct 2007 03:42:07 -0400 Subject: [ISDN] Hisax: eliminate many unnecessary references to CardType[] For the vast majority of CardType[card->typ] uses (but not all!), the string is constant for each driver. Therefore, we may replace CardType[card->typ] with the actual string describing the driver, making each printk() a bit more simple. This also has the nice, intended side effect of greatly reducing external references to hisax global CardType[]. This will be of value once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs. Signed-off-by: Jeff Garzik --- drivers/isdn/hisax/asuscom.c | 5 +---- drivers/isdn/hisax/avm_a1.c | 27 +++++++++------------------ drivers/isdn/hisax/bkm_a4t.c | 19 ++++++++++--------- drivers/isdn/hisax/bkm_a8.c | 31 +++++++++++++------------------ drivers/isdn/hisax/gazel.c | 5 ++--- drivers/isdn/hisax/hfc_pci.c | 2 -- drivers/isdn/hisax/hfc_sx.c | 2 -- drivers/isdn/hisax/isurf.c | 13 ++++--------- drivers/isdn/hisax/ix1_micro.c | 9 ++++----- drivers/isdn/hisax/mic.c | 5 +---- drivers/isdn/hisax/netjet.h | 2 -- drivers/isdn/hisax/niccy.c | 19 ++++++++----------- drivers/isdn/hisax/nj_s.c | 3 +-- drivers/isdn/hisax/nj_u.c | 4 ++-- drivers/isdn/hisax/s0box.c | 13 ++++--------- drivers/isdn/hisax/saphir.c | 8 +++----- drivers/isdn/hisax/sportster.c | 11 +++++------ drivers/isdn/hisax/teleint.c | 5 +---- drivers/isdn/hisax/telespci.c | 5 ++--- drivers/isdn/hisax/w6692.c | 2 -- 20 files changed, 70 insertions(+), 120 deletions(-) (limited to 'drivers/isdn') diff --git a/drivers/isdn/hisax/asuscom.c b/drivers/isdn/hisax/asuscom.c index 61e69e9c4aa9..b96f3184c2e5 100644 --- a/drivers/isdn/hisax/asuscom.c +++ b/drivers/isdn/hisax/asuscom.c @@ -20,8 +20,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; - static const char *Asuscom_revision = "$Revision: 1.14.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -376,8 +374,7 @@ setup_asuscom(struct IsdnCard *card) cs->irq = card->para[0]; if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: ISDNLink config port %x-%x already in use\n", cs->hw.asus.cfg_reg, cs->hw.asus.cfg_reg + bytecnt); return (0); diff --git a/drivers/isdn/hisax/avm_a1.c b/drivers/isdn/hisax/avm_a1.c index d9028e9b9b8f..eb6b432e261f 100644 --- a/drivers/isdn/hisax/avm_a1.c +++ b/drivers/isdn/hisax/avm_a1.c @@ -16,7 +16,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; static const char *avm_revision = "$Revision: 2.15.2.4 $"; #define AVM_A1_STAT_ISAC 0x01 @@ -200,16 +199,14 @@ setup_avm_a1(struct IsdnCard *card) cs->irq = card->para[0]; if (!request_region(cs->hw.avm.cfg_reg, 8, "avm cfg")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: AVM A1 config port %x-%x already in use\n", cs->hw.avm.cfg_reg, cs->hw.avm.cfg_reg + 8); return (0); } if (!request_region(cs->hw.avm.isac + 32, 32, "HiSax isac")) { printk(KERN_WARNING - "HiSax: %s isac ports %x-%x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 isac ports %x-%x already in use\n", cs->hw.avm.isac + 32, cs->hw.avm.isac + 64); release_ioregs(cs, 0); @@ -217,16 +214,14 @@ setup_avm_a1(struct IsdnCard *card) } if (!request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo")) { printk(KERN_WARNING - "HiSax: %s isac fifo port %x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 isac fifo port %x already in use\n", cs->hw.avm.isacfifo); release_ioregs(cs, 1); return (0); } if (!request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A")) { printk(KERN_WARNING - "HiSax: %s hscx A ports %x-%x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 hscx A ports %x-%x already in use\n", cs->hw.avm.hscx[0] + 32, cs->hw.avm.hscx[0] + 64); release_ioregs(cs, 3); @@ -234,16 +229,14 @@ setup_avm_a1(struct IsdnCard *card) } if (!request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo")) { printk(KERN_WARNING - "HiSax: %s hscx A fifo port %x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 hscx A fifo port %x already in use\n", cs->hw.avm.hscxfifo[0]); release_ioregs(cs, 7); return (0); } if (!request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B")) { printk(KERN_WARNING - "HiSax: %s hscx B ports %x-%x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 hscx B ports %x-%x already in use\n", cs->hw.avm.hscx[1] + 32, cs->hw.avm.hscx[1] + 64); release_ioregs(cs, 0xf); @@ -251,8 +244,7 @@ setup_avm_a1(struct IsdnCard *card) } if (!request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo")) { printk(KERN_WARNING - "HiSax: %s hscx B fifo port %x already in use\n", - CardType[cs->typ], + "HiSax: AVM A1 hscx B fifo port %x already in use\n", cs->hw.avm.hscxfifo[1]); release_ioregs(cs, 0x1f); return (0); @@ -284,9 +276,8 @@ setup_avm_a1(struct IsdnCard *card) printk(KERN_INFO "AVM A1: Byte at %x is %x\n", cs->hw.avm.cfg_reg, val); - printk(KERN_INFO - "HiSax: %s config irq:%d cfg:0x%X\n", - CardType[cs->typ], cs->irq, + printk(KERN_INFO "HiSax: AVM A1 config irq:%d cfg:0x%X\n", + cs->irq, cs->hw.avm.cfg_reg); printk(KERN_INFO "HiSax: isac:0x%X/0x%X\n", diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c index 3d1bdc8431ad..9ca2ee54cc94 100644 --- a/drivers/isdn/hisax/bkm_a4t.c +++ b/drivers/isdn/hisax/bkm_a4t.c @@ -20,8 +20,6 @@ #include #include "bkm_ax.h" -extern const char *CardType[]; - static const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $"; @@ -284,15 +282,16 @@ static int __devinit a4t_cs_init(struct IsdnCard *card, I20_REGISTER_FILE *pI20_Regs; if (!cs->irq) { /* IRQ range check ?? */ - printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]); + printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n"); return (0); } cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096); /* Check suspecious address */ pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base); if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) { - printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n", - CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096); + printk(KERN_WARNING "HiSax: Telekom A4T address " + "%lx-%lx suspicious\n", + cs->hw.ax.base, cs->hw.ax.base + 4096); iounmap((void *) cs->hw.ax.base); cs->hw.ax.base = 0; return (0); @@ -302,8 +301,9 @@ static int __devinit a4t_cs_init(struct IsdnCard *card, cs->hw.ax.isac_ale = GCS_1; cs->hw.ax.jade_ale = GCS_3; - printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n", - CardType[card->typ], cs->hw.ax.base, cs->irq); + printk(KERN_INFO "HiSax: Telekom A4T: Card configured at " + "0x%lX IRQ %d\n", + cs->hw.ax.base, cs->irq); setup_isac(cs); cs->readisac = &ReadISAC; @@ -349,11 +349,12 @@ setup_bkm_a4t(struct IsdnCard *card) break; } if (!found) { - printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]); + printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n"); return (0); } if (!pci_memaddr) { - printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]); + printk(KERN_WARNING "HiSax: Telekom A4T: " + "No Memory base address\n"); return (0); } diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c index 99ef3b43fcd7..e1ff4717a8a6 100644 --- a/drivers/isdn/hisax/bkm_a8.c +++ b/drivers/isdn/hisax/bkm_a8.c @@ -22,8 +22,6 @@ #define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */ -extern const char *CardType[]; - static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $"; static const char *sct_quadro_subtypes[] = @@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id) goto Start_IPAC; } if (!icnt) - printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n", - CardType[cs->typ], + printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n", sct_quadro_subtypes[cs->subtyp]); writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF); writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0); @@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card) if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4) cs->subtyp = card->para[0]; else { - printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n", - CardType[card->typ]); + printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid " + "subcontroller in configuration, default to 1\n"); return (0); } if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) || @@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card) } } if (!found) { - printk(KERN_WARNING "HiSax: %s (%s): Card not found\n", - CardType[card->typ], + printk(KERN_WARNING "HiSax: Scitel Quadro (%s): " + "Card not found\n", sct_quadro_subtypes[cs->subtyp]); return (0); } #ifdef ATTEMPT_PCI_REMAPPING /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */ if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) { - printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n", - CardType[card->typ], + printk(KERN_WARNING "HiSax: Scitel Quadro (%s): " + "PLX rev 1, remapping required!\n", sct_quadro_subtypes[cs->subtyp]); /* Restart PCI negotiation */ pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1); @@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card) #endif /* End HACK */ } if (!pci_irq) { /* IRQ range check ?? */ - printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n", - CardType[card->typ], + printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n", sct_quadro_subtypes[cs->subtyp]); return (0); } @@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card) pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4); pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5); if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) { - printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n", - CardType[card->typ], + printk(KERN_WARNING "HiSax: Scitel Quadro (%s): " + "No IO base address(es)\n", sct_quadro_subtypes[cs->subtyp]); return (0); } @@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card) /* For isac and hscx data path */ cs->hw.ax.data_adr = cs->hw.ax.base + 4; - printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n", - CardType[card->typ], + printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at " + "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n", sct_quadro_subtypes[cs->subtyp], cs->hw.ax.plx_adr, cs->hw.ax.base, @@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card) cs->cardmsg = &BKM_card_msg; cs->irq_func = &bkm_interrupt_ipac; - printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n", - CardType[card->typ], + printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n", sct_quadro_subtypes[cs->subtyp], readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID)); return (1); diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c index f66620ad8e7c..0ea3b4607680 100644 --- a/drivers/isdn/hisax/gazel.c +++ b/drivers/isdn/hisax/gazel.c @@ -19,7 +19,6 @@ #include "ipac.h" #include -extern const char *CardType[]; static const char *gazel_revision = "$Revision: 2.19.2.4 $"; #define R647 1 @@ -479,8 +478,8 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs) return 0; error: - printk(KERN_WARNING "Gazel: %s io ports 0x%x-0x%x already in use\n", - CardType[cs->typ], adr, adr + len); + printk(KERN_WARNING "Gazel: io ports 0x%x-0x%x already in use\n", + adr, adr + len); return 1; } diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index fba8b624ffcf..f1265667b062 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -22,8 +22,6 @@ #include #include -extern const char *CardType[]; - static const char *hfcpci_revision = "$Revision: 1.48.2.4 $"; /* table entry in the PCI devices list */ diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c index 05482d2688e3..f4a213877e35 100644 --- a/drivers/isdn/hisax/hfc_sx.c +++ b/drivers/isdn/hisax/hfc_sx.c @@ -18,8 +18,6 @@ #include #include -extern const char *CardType[]; - static const char *hfcsx_revision = "$Revision: 1.12.2.5 $"; /***************************************/ diff --git a/drivers/isdn/hisax/isurf.c b/drivers/isdn/hisax/isurf.c index 55de06953540..ca4161798cdf 100644 --- a/drivers/isdn/hisax/isurf.c +++ b/drivers/isdn/hisax/isurf.c @@ -17,8 +17,6 @@ #include "isdnl1.h" #include -extern const char *CardType[]; - static const char *ISurf_revision = "$Revision: 1.12.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -251,22 +249,19 @@ setup_isurf(struct IsdnCard *card) return(0); } #else - printk(KERN_WARNING "HiSax: %s port/mem not set\n", - CardType[card->typ]); + printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n"); return (0); #endif } if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) { printk(KERN_WARNING - "HiSax: %s config port %x already in use\n", - CardType[card->typ], + "HiSax: Siemens I-Surf config port %x already in use\n", cs->hw.isurf.reset); return (0); } if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) { - printk(KERN_WARNING - "HiSax: %s memory region %lx-%lx already in use\n", - CardType[card->typ], + printk(KERN_WARNING "HiSax: Siemens I-Surf memory region " + "%lx-%lx already in use\n", cs->hw.isurf.phymem, cs->hw.isurf.phymem + ISURF_IOMEM_SIZE); release_region(cs->hw.isurf.reset, 1); diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c index 252d79de5e5e..2d18d4f1e57e 100644 --- a/drivers/isdn/hisax/ix1_micro.c +++ b/drivers/isdn/hisax/ix1_micro.c @@ -24,7 +24,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; static const char *ix1_revision = "$Revision: 2.12.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -288,15 +287,15 @@ setup_ix1micro(struct IsdnCard *card) if (cs->hw.ix1.cfg_reg) { if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: ITK ix1-micro Rev.2 config port " + "%x-%x already in use\n", cs->hw.ix1.cfg_reg, cs->hw.ix1.cfg_reg + 4); return (0); } } - printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n", - CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg); + printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n", + cs->irq, cs->hw.ix1.cfg_reg); setup_isac(cs); cs->readisac = &ReadISAC; cs->writeisac = &WriteISAC; diff --git a/drivers/isdn/hisax/mic.c b/drivers/isdn/hisax/mic.c index a81d175d9f64..253943029d25 100644 --- a/drivers/isdn/hisax/mic.c +++ b/drivers/isdn/hisax/mic.c @@ -16,8 +16,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; - static const char *mic_revision = "$Revision: 1.12.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -210,8 +208,7 @@ setup_mic(struct IsdnCard *card) if (!request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: ith mic config port %x-%x already in use\n", cs->hw.mic.cfg_reg, cs->hw.mic.cfg_reg + bytecnt); return (0); diff --git a/drivers/isdn/hisax/netjet.h b/drivers/isdn/hisax/netjet.h index 4d89d3ea4173..68e504d4ebf9 100644 --- a/drivers/isdn/hisax/netjet.h +++ b/drivers/isdn/hisax/netjet.h @@ -12,8 +12,6 @@ * */ -extern const char *CardType[]; - #define byteout(addr,val) outb(val,addr) #define bytein(addr) inb(addr) diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c index bd9921128aa8..421b8e6763d7 100644 --- a/drivers/isdn/hisax/niccy.c +++ b/drivers/isdn/hisax/niccy.c @@ -21,7 +21,6 @@ #include #include -extern const char *CardType[]; static const char *niccy_revision = "$Revision: 1.21.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card) cs->subtyp = NICCY_PNP; cs->irq = card->para[0]; if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) { - printk(KERN_WARNING "HiSax: %s data port %x-%x " - "already in use\n", CardType[card->typ], + printk(KERN_WARNING "HiSax: NICCY data port %x-%x " + "already in use\n", cs->hw.niccy.isac, cs->hw.niccy.isac + 1); return 0; } if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) { - printk(KERN_WARNING "HiSax: %s address port %x-%x " - "already in use\n", CardType[card->typ], + printk(KERN_WARNING "HiSax: NICCY address port %x-%x " + "already in use\n", cs->hw.niccy.isac_ale, cs->hw.niccy.isac_ale + 1); release_region(cs->hw.niccy.isac, 2); @@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card) cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR; if (!request_region(cs->hw.niccy.isac, 4, "niccy")) { printk(KERN_WARNING - "HiSax: %s data port %x-%x already in use\n", - CardType[card->typ], + "HiSax: NICCY data port %x-%x already in use\n", cs->hw.niccy.isac, cs->hw.niccy.isac + 4); return 0; } if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) { printk(KERN_WARNING - "HiSax: %s pci port %x-%x already in use\n", - CardType[card->typ], + "HiSax: NICCY pci port %x-%x already in use\n", cs->hw.niccy.cfg_reg, cs->hw.niccy.cfg_reg + 0x40); release_region(cs->hw.niccy.isac, 4); @@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card) return 0; #endif /* CONFIG_PCI_LEGACY */ } - printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n", - CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI", + printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n", + (cs->subtyp == 1) ? "PnP" : "PCI", cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale); setup_isac(cs); cs->readisac = &ReadISAC; diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c index a895dfed40e5..8d36ccc87d81 100644 --- a/drivers/isdn/hisax/nj_s.c +++ b/drivers/isdn/hisax/nj_s.c @@ -235,8 +235,7 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card, cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq); if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) { printk(KERN_WARNING - "HiSax: %s config port %#lx-%#lx already in use\n", - CardType[card->typ], + "HiSax: NETjet-S config port %#lx-%#lx already in use\n", cs->hw.njet.base, cs->hw.njet.base + bytecnt); return (0); diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c index f017d3816b1d..d306c946ffba 100644 --- a/drivers/isdn/hisax/nj_u.c +++ b/drivers/isdn/hisax/nj_u.c @@ -197,8 +197,8 @@ static int __devinit nju_cs_init_rest(struct IsdnCard *card, cs->hw.njet.base, cs->irq); if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) { printk(KERN_WARNING - "HiSax: %s config port %#lx-%#lx already in use\n", - CardType[card->typ], + "HiSax: NETspider-U config port %#lx-%#lx " + "already in use\n", cs->hw.njet.base, cs->hw.njet.base + bytecnt); return (0); diff --git a/drivers/isdn/hisax/s0box.c b/drivers/isdn/hisax/s0box.c index 150ef68b4ae2..16d00b555c8c 100644 --- a/drivers/isdn/hisax/s0box.c +++ b/drivers/isdn/hisax/s0box.c @@ -16,7 +16,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; static const char *s0box_revision = "$Revision: 2.6.2.4 $"; static inline void @@ -231,19 +230,15 @@ setup_s0box(struct IsdnCard *card) cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e; cs->irq = card->para[0]; if (!request_region(cs->hw.teles3.cfg_reg,8, "S0Box parallel I/O")) { - printk(KERN_WARNING - "HiSax: %s ports %x-%x already in use\n", - CardType[cs->typ], + printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n", cs->hw.teles3.cfg_reg, cs->hw.teles3.cfg_reg + 7); return 0; } - printk(KERN_INFO - "HiSax: %s config irq:%d isac:0x%x cfg:0x%x\n", - CardType[cs->typ], cs->irq, + printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x cfg:0x%x\n", + cs->irq, cs->hw.teles3.isac, cs->hw.teles3.cfg_reg); - printk(KERN_INFO - "HiSax: hscx A:0x%x hscx B:0x%x\n", + printk(KERN_INFO "HiSax: hscx A:0x%x hscx B:0x%x\n", cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]); setup_isac(cs); cs->readisac = &ReadISAC; diff --git a/drivers/isdn/hisax/saphir.c b/drivers/isdn/hisax/saphir.c index c99b16690fb3..b34a81d655b8 100644 --- a/drivers/isdn/hisax/saphir.c +++ b/drivers/isdn/hisax/saphir.c @@ -18,7 +18,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; static char *saphir_rev = "$Revision: 1.10.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -260,15 +259,14 @@ setup_saphir(struct IsdnCard *card) cs->irq = card->para[0]; if (!request_region(cs->hw.saphir.cfg_reg, 6, "saphir")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: HST Saphir config port %x-%x already in use\n", cs->hw.saphir.cfg_reg, cs->hw.saphir.cfg_reg + 5); return (0); } - printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n", - CardType[cs->typ], cs->irq, cs->hw.saphir.cfg_reg); + printk(KERN_INFO "HiSax: HST Saphir config irq:%d io:0x%X\n", + cs->irq, cs->hw.saphir.cfg_reg); setup_isac(cs); cs->hw.saphir.timer.function = (void *) SaphirWatchDog; diff --git a/drivers/isdn/hisax/sportster.c b/drivers/isdn/hisax/sportster.c index 02209500b3b7..0a53759adfa4 100644 --- a/drivers/isdn/hisax/sportster.c +++ b/drivers/isdn/hisax/sportster.c @@ -18,7 +18,6 @@ #include "hscx.h" #include "isdnl1.h" -extern const char *CardType[]; static const char *sportster_revision = "$Revision: 1.16.2.4 $"; #define byteout(addr,val) outb(val,addr) @@ -192,9 +191,9 @@ get_io_range(struct IsdnCardState *cs) for (i=0;i<64;i++) { adr = cs->hw.spt.cfg_reg + i *1024; if (!request_region(adr, 8, "sportster")) { - printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[cs->typ], adr, adr + 8); + printk(KERN_WARNING "HiSax: USR Sportster config port " + "%x-%x already in use\n", + adr, adr + 8); break; } } @@ -247,8 +246,8 @@ setup_sportster(struct IsdnCard *card) printk(KERN_WARNING "Sportster: wrong IRQ\n"); return(0); } - printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n", - CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg); + printk(KERN_INFO "HiSax: USR Sportster config irq:%d cfg:0x%X\n", + cs->irq, cs->hw.spt.cfg_reg); setup_isac(cs); cs->readisac = &ReadISAC; cs->writeisac = &WriteISAC; diff --git a/drivers/isdn/hisax/teleint.c b/drivers/isdn/hisax/teleint.c index 0909662b7458..b0ce4ae45cbf 100644 --- a/drivers/isdn/hisax/teleint.c +++ b/drivers/isdn/hisax/teleint.c @@ -16,8 +16,6 @@ #include "hfc_2bs0.h" #include "isdnl1.h" -extern const char *CardType[]; - static const char *TeleInt_revision = "$Revision: 1.16.2.5 $"; #define byteout(addr,val) outb(val,addr) @@ -286,8 +284,7 @@ setup_TeleInt(struct IsdnCard *card) init_timer(&cs->hw.hfc.timer); if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) { printk(KERN_WARNING - "HiSax: %s config port %x-%x already in use\n", - CardType[card->typ], + "HiSax: TeleInt config port %x-%x already in use\n", cs->hw.hfc.addr, cs->hw.hfc.addr + 2); return (0); diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c index 4393003ae162..28b08de4673d 100644 --- a/drivers/isdn/hisax/telespci.c +++ b/drivers/isdn/hisax/telespci.c @@ -19,7 +19,6 @@ #include "isdnl1.h" #include -extern const char *CardType[]; static const char *telespci_revision = "$Revision: 2.23.2.3 $"; #define ZORAN_PO_RQ_PEN 0x02000000 @@ -329,8 +328,8 @@ setup_telespci(struct IsdnCard *card) /* writel(0x00800000, cs->hw.teles0.membase + 0x200); */ printk(KERN_INFO - "HiSax: %s config irq:%d mem:%p\n", - CardType[cs->typ], cs->irq, + "HiSax: Teles PCI config irq:%d mem:%p\n", + cs->irq, cs->hw.teles0.membase); setup_isac(cs); diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c index 39129b94f8be..bb1c8dd1a230 100644 --- a/drivers/isdn/hisax/w6692.c +++ b/drivers/isdn/hisax/w6692.c @@ -38,8 +38,6 @@ static const PCI_ENTRY id_list[] = #define W6692_DYNALINK 1 #define W6692_USR 2 -extern const char *CardType[]; - static const char *w6692_revision = "$Revision: 1.18.2.4 $"; #define DBUSY_TIMER_VALUE 80 -- cgit v1.2.3