From cfd0c77d0830d33288e9da17aa10db3a61de601a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 25 Jul 2014 14:02:14 -0300 Subject: [media] au0828: improve I2C speed Commits 21dc61d3c0a4 and 7a1dd50b89d4 reduced the board I2C speed to 20 MHz by default, due to a I2C stretch issue: while xc5000 uses i2c stretch when a command is sent to it, au0828 doesn't support this feature. However, this is needed only for Xceive tuners. The other I2C devices can work at the max speed. So, revert the workarounds at board level, handling it at I2C level, only when talking with xc5000. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/au0828/au0828-cards.c | 6 +++--- drivers/media/usb/au0828/au0828-i2c.c | 37 +++++++++++++++++++++------------ 2 files changed, 27 insertions(+), 16 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 7fdadf9bc90b..3a7924044a87 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -77,7 +77,7 @@ struct au0828_board au0828_boards[] = { stretch fits inside of a normal clock cycle, or else the au0828 fails to set the STOP bit. A 30 KHz clock puts the clock pulse width at 18us */ - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -108,7 +108,7 @@ struct au0828_board au0828_boards[] = { .name = "DViCO FusionHDTV USB", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", diff --git a/drivers/media/usb/au0828/au0828-i2c.c b/drivers/media/usb/au0828/au0828-i2c.c index 17ec3651b10e..daaeaf1b089c 100644 --- a/drivers/media/usb/au0828/au0828-i2c.c +++ b/drivers/media/usb/au0828/au0828-i2c.c @@ -141,25 +141,27 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, { int i, strobe = 0; struct au0828_dev *dev = i2c_adap->algo_data; + u8 i2c_speed = dev->board.i2c_clk_divider; dprintk(4, "%s()\n", __func__); au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); - /* Set the I2C clock */ if (((dev->board.tuner_type == TUNER_XC5000) || (dev->board.tuner_type == TUNER_XC5000C)) && - (dev->board.tuner_addr == msg->addr) && - (msg->len == 64)) { - /* Hack to speed up firmware load. The xc5000 lets us do up - to 400 KHz when in firmware download mode */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - AU0828_I2C_CLK_250KHZ); - } else { - /* Use the i2c clock speed in the board configuration */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - dev->board.i2c_clk_divider); + (dev->board.tuner_addr == msg->addr)) { + /* + * Due to I2C clock stretch, we need to use a lower speed + * on xc5000 for commands. However, firmware transfer can + * speed up to 400 KHz. + */ + if (msg->len == 64) + i2c_speed = AU0828_I2C_CLK_250KHZ; + else + i2c_speed = AU0828_I2C_CLK_20KHZ; } + /* Set the I2C clock */ + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed); /* Hardware needs 8 bit addresses */ au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); @@ -228,15 +230,24 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, const struct i2c_msg *msg, int joined) { struct au0828_dev *dev = i2c_adap->algo_data; + u8 i2c_speed = dev->board.i2c_clk_divider; int i; dprintk(4, "%s()\n", __func__); au0828_write(dev, AU0828_I2C_MULTIBYTE_MODE_2FF, 0x01); + /* + * Due to xc5000c clock stretch, we cannot use full speed at + * readings from xc5000, as otherwise they'll fail. + */ + if (((dev->board.tuner_type == TUNER_XC5000) || + (dev->board.tuner_type == TUNER_XC5000C)) && + (dev->board.tuner_addr == msg->addr)) + i2c_speed = AU0828_I2C_CLK_20KHZ; + /* Set the I2C clock */ - au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, - dev->board.i2c_clk_divider); + au0828_write(dev, AU0828_I2C_CLK_DIVIDER_202, i2c_speed); /* Hardware needs 8 bit addresses */ au0828_write(dev, AU0828_I2C_DEST_ADDR_203, msg->addr << 1); -- cgit v1.2.3