From 8f574b35f22fbb9b5e5f1d11ad6b55b6f35f4533 Mon Sep 17 00:00:00 2001 From: Jie Yang Date: Tue, 1 Jun 2010 00:28:12 -0700 Subject: atl1c: Add AR8151 v2 support and change L0s/L1 routine Add AR8151 v2.0 Gigabit 1000 support Change jumbo frame size to 6K Update L0s/L1 rountine when link speed is 100M or 1G, set L1 link timer to 4 for l1d_2 and l2c_b2 set L1 link timer to 7 for l2c_b, set L1 link timer to 0xF for others. Update atl1c_suspend routine just refactory the function, add atl1c_phy_power_saving routine, when Wake On Lan enable, this func will be called to save power, it will reautoneg PHY to 10/100M speed depend on the link partners link capability. Update atl1c_configure_des_ring do not use l2c_b default SRAM configuration. Signed-off-by: Jie Yang Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net/atl1c/atl1c.h') diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h index 84ae905bf732..52abbbdf8a08 100644 --- a/drivers/net/atl1c/atl1c.h +++ b/drivers/net/atl1c/atl1c.h @@ -73,7 +73,8 @@ #define FULL_DUPLEX 2 #define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN) -#define MAX_JUMBO_FRAME_SIZE (9*1024) +#define MAX_JUMBO_FRAME_SIZE (6*1024) +#define MAX_TSO_FRAME_SIZE (7*1024) #define MAX_TX_OFFLOAD_THRESH (9*1024) #define AT_MAX_RECEIVE_QUEUE 4 @@ -87,10 +88,11 @@ #define AT_MAX_INT_WORK 5 #define AT_TWSI_EEPROM_TIMEOUT 100 #define AT_HW_MAX_IDLE_DELAY 10 -#define AT_SUSPEND_LINK_TIMEOUT 28 +#define AT_SUSPEND_LINK_TIMEOUT 100 #define AT_ASPM_L0S_TIMER 6 #define AT_ASPM_L1_TIMER 12 +#define AT_LCKDET_TIMER 12 #define ATL1C_PCIE_L0S_L1_DISABLE 0x01 #define ATL1C_PCIE_PHY_RESET 0x02 @@ -316,6 +318,7 @@ enum atl1c_nic_type { athr_l2c_b, athr_l2c_b2, athr_l1d, + athr_l1d_2, }; enum atl1c_trans_queue { @@ -392,6 +395,8 @@ struct atl1c_hw { u16 subsystem_id; u16 subsystem_vendor_id; u8 revision_id; + u16 phy_id1; + u16 phy_id2; u32 intr_mask; u8 dmaw_dly_cnt; -- cgit v1.2.3