From 8da5bb7a274559737defa400a42461e1366fc30a Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Fri, 30 Nov 2007 09:55:43 +0200 Subject: ipg: fix checkpatch reported errors Signed-off-by: Pekka Enberg Cc: Francois Romieu Cc: Sorbica Shieh Cc: Jesse Huang --- drivers/net/ipg.c | 48 +++++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 23 deletions(-) (limited to 'drivers/net/ipg.c') diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 3099a7b15ecc..5d93eca07b66 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -34,9 +34,9 @@ IPG_AC_DMA | IPG_AC_FIFO | IPG_AC_NETWORK | IPG_AC_HOST | \ IPG_AC_AUTO_INIT) -#define ipg_w32(val32,reg) iowrite32((val32), ioaddr + (reg)) -#define ipg_w16(val16,reg) iowrite16((val16), ioaddr + (reg)) -#define ipg_w8(val8,reg) iowrite8((val8), ioaddr + (reg)) +#define ipg_w32(val32, reg) iowrite32((val32), ioaddr + (reg)) +#define ipg_w16(val16, reg) iowrite16((val16), ioaddr + (reg)) +#define ipg_w8(val8, reg) iowrite8((val8), ioaddr + (reg)) #define ipg_r32(reg) ioread32(ioaddr + (reg)) #define ipg_r16(reg) ioread16(ioaddr + (reg)) @@ -54,20 +54,22 @@ MODULE_AUTHOR("IC Plus Corp. 2003"); MODULE_DESCRIPTION("IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver"); MODULE_LICENSE("GPL"); -//variable record -- index by leading revision/length -//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN +/* + * Variable record -- index by leading revision/length + * Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN + */ static unsigned short DefaultPhyParam[] = { - // 11/12/03 IP1000A v1-3 rev=0x40 + /* 11/12/03 IP1000A v1-3 rev=0x40 */ /*-------------------------------------------------------------------------- (0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2, 27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6, 31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700, --------------------------------------------------------------------------*/ - // 12/17/03 IP1000A v1-4 rev=0x40 + /* 12/17/03 IP1000A v1-4 rev=0x40 */ (0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31, 0x0000, 30, 0x005e, 9, 0x0700, - // 01/09/04 IP1000A v1-5 rev=0x41 + /* 01/09/04 IP1000A v1-5 rev=0x41 */ (0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31, 0x0000, 30, 0x005e, 9, 0x0700, @@ -187,7 +189,7 @@ static void send_end(void __iomem *ioaddr, u8 phyctrlpolarity) phyctrlpolarity) & IPG_PC_RSVD_MASK, PHY_CTRL); } -static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity) +static u16 read_phy_bit(void __iomem *ioaddr, u8 phyctrlpolarity) { u16 bit_data; @@ -204,7 +206,7 @@ static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity) * Read a register from the Physical Layer device located * on the IPG NIC, using the IPG PHYCTRL register. */ -static int mdio_read(struct net_device * dev, int phy_id, int phy_reg) +static int mdio_read(struct net_device *dev, int phy_id, int phy_reg) { void __iomem *ioaddr = ipg_ioaddr(dev); /* @@ -548,7 +550,7 @@ static int ipg_config_autoneg(struct net_device *dev) printk("\n"); } else { /* Configure IPG for half duplex operation. */ - printk(KERN_INFO "%s: setting half duplex, " + printk(KERN_INFO "%s: setting half duplex, " "no TX flow control, no RX flow control.\n", dev->name); mac_ctrl_val &= ~IPG_MC_DUPLEX_SELECT_FD & @@ -1080,12 +1082,12 @@ static int ipg_nic_rxrestore(struct net_device *dev) #ifdef JUMBO_FRAME /* use jumboindex and jumbosize to control jumbo frame status - initial status is jumboindex=-1 and jumbosize=0 - 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done. - 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving - 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump - previous receiving and need to continue dumping the current one -*/ + * initial status is jumboindex=-1 and jumbosize=0 + * 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done. + * 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving + * 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump + * previous receiving and need to continue dumping the current one + */ enum { NORMAL_PACKET, ERROR_PACKET @@ -1200,7 +1202,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev, jumbo->skb = NULL; } - // 1: found error, 0 no error + /* 1: found error, 0 no error */ if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET) return; @@ -1208,7 +1210,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev, if (!skb) return; - // accept this frame and send to upper layer + /* accept this frame and send to upper layer */ framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN; if (framelen > IPG_RXFRAG_SIZE) framelen = IPG_RXFRAG_SIZE; @@ -1229,11 +1231,11 @@ static void ipg_nic_rx_with_start(struct net_device *dev, struct pci_dev *pdev = sp->pdev; struct sk_buff *skb; - // 1: found error, 0 no error + /* 1: found error, 0 no error */ if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET) return; - // accept this frame and send to upper layer + /* accept this frame and send to upper layer */ skb = sp->rx_buff[entry]; if (!skb) return; @@ -1260,7 +1262,7 @@ static void ipg_nic_rx_with_end(struct net_device *dev, { struct ipg_jumbo *jumbo = &sp->jumbo; - //1: found error, 0 no error + /* 1: found error, 0 no error */ if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) { struct sk_buff *skb = sp->rx_buff[entry]; @@ -1311,7 +1313,7 @@ static void ipg_nic_rx_no_start_no_end(struct net_device *dev, { struct ipg_jumbo *jumbo = &sp->jumbo; - //1: found error, 0 no error + /* 1: found error, 0 no error */ if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) { struct sk_buff *skb = sp->rx_buff[entry]; -- cgit v1.2.3